Fix the LUFA lib to use a submodule instead of just files (#6245)

* Remove LUFA files

* Update descriptions for newer version of LUFA

* Create PR6245.md

* Fix CDC(Serial) type errors

* Fix missed merge conflict for AUDIO_DTYPE_CSInterface

2 files changed, 0 insertions, 227 deletions

diff --git a/lib/lufa/Projects/XPLAINBridge/Lib/SoftUART.c b/lib/lufa/Projects/XPLAINBridge/Lib/SoftUART.c
deleted file mode 100644
index 5c0e3c8cd..000000000
--- a/lib/lufa/Projects/XPLAINBridge/Lib/SoftUART.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2017.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  David Prentice (david.prentice [at] farming [dot] uk)
-  Copyright 2010  Peter Danneger
-  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Software UART for both data transmission and reception. This
- *  code continuously monitors the ring buffers set up by the main
- *  project source file and reads/writes data as it becomes available.
- */
-
-#include "SoftUART.h"
-
-/** Total number of bits remaining to be sent in the current frame */
-static uint8_t TX_BitsRemaining;
-
-/** Temporary data variable to hold the byte being transmitted as it is shifted out */
-static uint8_t TX_Data;
-
-/** Total number of bits remaining to be received in the current frame */
-static uint8_t RX_BitsRemaining;
-
-/** Temporary data variable to hold the byte being received as it is shifted in */
-static uint8_t RX_Data;
-
-
-/** Initializes the software UART, ready for data transmission and reception into the global ring buffers. */
-void SoftUART_Init(void)
-{
-	/* Set TX pin to output high, enable RX pull-up */
-	STXPORT |= (1 << STX);
-	STXDDR  |= (1 << STX);
-	SRXPORT |= (1 << SRX);
-
-	/* Enable INT0 for the detection of incoming start bits that signal the start of a byte */
-	EICRA  = (1 << ISC01);
-	EIMSK  = (1 << INT0);
-
-	/* Set the transmission and reception timer compare values for the default baud rate */
-	SoftUART_SetBaud(9600);
-
-	/* Setup reception timer compare ISR */
-	TIMSK1 = (1 << OCIE1A);
-
-	/* Setup transmission timer compare ISR and start the timer */
-	TIMSK3 = (1 << OCIE3A);
-	TCCR3B = ((1 << CS30) | (1 << WGM32));
-}
-
-/** ISR to detect the start of a bit being sent to the software UART. */
-ISR(INT0_vect, ISR_BLOCK)
-{
-	/* Reset the number of reception bits remaining counter */
-	RX_BitsRemaining = 8;
-
-	/* Reset the bit reception timer to -(1/2) of the total bit time, so that the first data bit is
-	 * sampled mid way through the total bit time, making reception more robust.
-	 */
-	TCNT1 = -(OCR1A >> 1);
-
-	/* Check to see that the pin is still low (prevents glitches from starting a frame reception) */
-	if (!(SRXPIN & (1 << SRX)))
-	{
-		/* Disable start bit detection ISR while the next byte is received */
-		EIMSK = 0;
-
-		/* Start the reception timer */
-		TCCR1B = ((1 << CS10) | (1 << WGM12));
-	}
-}
-
-/** ISR to manage the reception of bits to the software UART. */
-ISR(TIMER1_COMPA_vect, ISR_BLOCK)
-{
-	/* Cache the current RX pin value for later checking */
-	uint8_t SRX_Cached = (SRXPIN & (1 << SRX));
-
-	/* Check if reception has finished */
-	if (RX_BitsRemaining)
-	{
-		/* Shift the current received bit mask to the next bit position */
-		RX_Data >>= 1;
-		RX_BitsRemaining--;
-
-		/* Store next bit into the received data variable */
-		if (SRX_Cached)
-		  RX_Data |= (1 << 7);
-	}
-	else
-	{
-		/* Disable the reception timer as all data has now been received, re-enable start bit detection ISR */
-		TCCR1B = 0;
-		EIFR   = (1 << INTF0);
-		EIMSK  = (1 << INT0);
-
-		/* Reception complete, store the received byte if stop bit valid */
-		if (SRX_Cached)
-		  RingBuffer_Insert(&UARTtoUSB_Buffer, RX_Data);
-	}
-}
-
-/** ISR to manage the transmission of bits via the software UART. */
-ISR(TIMER3_COMPA_vect, ISR_BLOCK)
-{
-	/* Check if transmission has finished */
-	if (TX_BitsRemaining)
-	{
-		/* Set the TX line to the value of the next bit in the byte to send */
-		if (TX_Data & (1 << 0))
-		  STXPORT &= ~(1 << STX);
-		else
-		  STXPORT |=  (1 << STX);
-
-		/* Shift the transmission byte to move the next bit into position and decrement the bits remaining counter */
-		TX_Data >>= 1;
-		TX_BitsRemaining--;
-	}
-	else if (!(RX_BitsRemaining) && !(RingBuffer_IsEmpty(&USBtoUART_Buffer)))
-	{
-		/* Start bit - TX line low */
-		STXPORT &= ~(1 << STX);
-
-		/* Transmission complete, get the next byte to send (if available) */
-		TX_Data          = ~RingBuffer_Remove(&USBtoUART_Buffer);
-		TX_BitsRemaining = 9;
-	}
-}
-
diff --git a/lib/lufa/Projects/XPLAINBridge/Lib/SoftUART.h b/lib/lufa/Projects/XPLAINBridge/Lib/SoftUART.h
deleted file mode 100644
index b27396781..000000000
--- a/lib/lufa/Projects/XPLAINBridge/Lib/SoftUART.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2017.
-
-  dean [at] fourwalledcubicle [dot] com
-           www.lufa-lib.org
-*/
-
-/*
-  Copyright 2010  David Prentice (david.prentice [at] farming [dot] uk)
-  Copyright 2010  Peter Danneger
-  Copyright 2017  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaims all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Header file for SoftUART.c.
- */
-
-#ifndef _SOFT_UART_
-#define _SOFT_UART_
-
-	/* Includes: */
-		#include <avr/io.h>
-		#include <avr/interrupt.h>
-		#include <stdbool.h>
-
-		#include "../XPLAINBridge.h"
-		#include "Config/AppConfig.h"
-
-	/* Macros: */
-		#define SRX        PD0
-		#define SRXPIN     PIND
-		#define SRXPORT    PORTD
-
-		#define STX        PD1
-		#define STXPORT    PORTD
-		#define STXDDR     DDRD
-
-	/* Inline Functions: */
-		static inline void SoftUART_SetBaud(const uint32_t Baud)
-		{
-			uint16_t BitTime = ((F_CPU / Baud) - 1);
-
-			OCR1A = BitTime;
-			OCR3A = BitTime;
-		}
-
-	/* Function Prototypes: */
-		void SoftUART_Init(void);
-
-#endif
-