clang-format changes

1 files changed, 302 insertions, 390 deletions

diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c
index f2ecf2465..12a6924fd 100644
--- a/tmk_core/protocol/lufa/lufa.c
+++ b/tmk_core/protocol/lufa/lufa.c
@@ -45,7 +45,7 @@
 #include "sendchar.h"
 #include "debug.h"
 #ifdef SLEEP_LED_ENABLE
-#include "sleep_led.h"
+#    include "sleep_led.h"
 #endif
 #include "suspend.h"
 
@@ -57,86 +57,80 @@
 #include "rgblight_reconfig.h"
 
 #ifdef NKRO_ENABLE
-  #include "keycode_config.h"
+#    include "keycode_config.h"
 
-  extern keymap_config_t keymap_config;
+extern keymap_config_t keymap_config;
 #endif
 
-
 #ifdef AUDIO_ENABLE
-    #include <audio.h>
+#    include <audio.h>
 #endif
 
 #ifdef BLUETOOTH_ENABLE
-  #ifdef MODULE_ADAFRUIT_BLE
-    #include "adafruit_ble.h"
-  #else
-    #include "bluetooth.h"
-  #endif
+#    ifdef MODULE_ADAFRUIT_BLE
+#        include "adafruit_ble.h"
+#    else
+#        include "bluetooth.h"
+#    endif
 #endif
 
 #ifdef VIRTSER_ENABLE
-    #include "virtser.h"
+#    include "virtser.h"
 #endif
 
 #if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE)
-    #include "rgblight.h"
+#    include "rgblight.h"
 #endif
 
 #ifdef MIDI_ENABLE
-  #include "qmk_midi.h"
+#    include "qmk_midi.h"
 #endif
 
 #ifdef RAW_ENABLE
-	#include "raw_hid.h"
+#    include "raw_hid.h"
 #endif
 
 uint8_t keyboard_idle = 0;
 /* 0: Boot Protocol, 1: Report Protocol(default) */
-uint8_t keyboard_protocol = 1;
+uint8_t        keyboard_protocol  = 1;
 static uint8_t keyboard_led_stats = 0;
 
 static report_keyboard_t keyboard_report_sent;
 
 /* Host driver */
 static uint8_t keyboard_leds(void);
-static void send_keyboard(report_keyboard_t *report);
-static void send_mouse(report_mouse_t *report);
-static void send_system(uint16_t data);
-static void send_consumer(uint16_t data);
-host_driver_t lufa_driver = {
-    keyboard_leds,
-    send_keyboard,
-    send_mouse,
-    send_system,
-    send_consumer,
+static void    send_keyboard(report_keyboard_t *report);
+static void    send_mouse(report_mouse_t *report);
+static void    send_system(uint16_t data);
+static void    send_consumer(uint16_t data);
+host_driver_t  lufa_driver = {
+    keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer,
 };
 
 #ifdef VIRTSER_ENABLE
-USB_ClassInfo_CDC_Device_t cdc_device =
-{
-  .Config =
-  {
-    .ControlInterfaceNumber = CCI_INTERFACE,
-    .DataINEndpoint         =
-    {
-      .Address		= CDC_IN_EPADDR,
-      .Size		= CDC_EPSIZE,
-      .Banks		= 1,
-    },
-    .DataOUTEndpoint	    =
-    {
-      .Address		= CDC_OUT_EPADDR,
-      .Size		= CDC_EPSIZE,
-      .Banks		= 1,
-    },
-    .NotificationEndpoint   =
-    {
-      .Address		= CDC_NOTIFICATION_EPADDR,
-      .Size		= CDC_NOTIFICATION_EPSIZE,
-      .Banks		= 1,
-    },
-  },
+USB_ClassInfo_CDC_Device_t cdc_device = {
+    .Config =
+        {
+            .ControlInterfaceNumber = CCI_INTERFACE,
+            .DataINEndpoint =
+                {
+                    .Address = CDC_IN_EPADDR,
+                    .Size    = CDC_EPSIZE,
+                    .Banks   = 1,
+                },
+            .DataOUTEndpoint =
+                {
+                    .Address = CDC_OUT_EPADDR,
+                    .Size    = CDC_EPSIZE,
+                    .Banks   = 1,
+                },
+            .NotificationEndpoint =
+                {
+                    .Address = CDC_NOTIFICATION_EPADDR,
+                    .Size    = CDC_NOTIFICATION_EPSIZE,
+                    .Banks   = 1,
+                },
+        },
 };
 #endif
 
@@ -146,84 +140,73 @@ USB_ClassInfo_CDC_Device_t cdc_device =
  *
  * FIXME: Needs doc
  */
-void raw_hid_send( uint8_t *data, uint8_t length )
-{
-	// TODO: implement variable size packet
-	if ( length != RAW_EPSIZE )
-	{
-		return;
-	}
-
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	{
-		return;
-	}
-
-	// TODO: decide if we allow calls to raw_hid_send() in the middle
-	// of other endpoint usage.
-	uint8_t ep = Endpoint_GetCurrentEndpoint();
-
-	Endpoint_SelectEndpoint(RAW_IN_EPNUM);
-
-	// Check to see if the host is ready to accept another packet
-	if (Endpoint_IsINReady())
-	{
-		// Write data
-		Endpoint_Write_Stream_LE(data, RAW_EPSIZE, NULL);
-		// Finalize the stream transfer to send the last packet
-		Endpoint_ClearIN();
-	}
-
-	Endpoint_SelectEndpoint(ep);
+void raw_hid_send(uint8_t *data, uint8_t length) {
+    // TODO: implement variable size packet
+    if (length != RAW_EPSIZE) {
+        return;
+    }
+
+    if (USB_DeviceState != DEVICE_STATE_Configured) {
+        return;
+    }
+
+    // TODO: decide if we allow calls to raw_hid_send() in the middle
+    // of other endpoint usage.
+    uint8_t ep = Endpoint_GetCurrentEndpoint();
+
+    Endpoint_SelectEndpoint(RAW_IN_EPNUM);
+
+    // Check to see if the host is ready to accept another packet
+    if (Endpoint_IsINReady()) {
+        // Write data
+        Endpoint_Write_Stream_LE(data, RAW_EPSIZE, NULL);
+        // Finalize the stream transfer to send the last packet
+        Endpoint_ClearIN();
+    }
+
+    Endpoint_SelectEndpoint(ep);
 }
 
 /** \brief Raw HID Receive
  *
  * FIXME: Needs doc
  */
-__attribute__ ((weak))
-void raw_hid_receive( uint8_t *data, uint8_t length )
-{
-	// Users should #include "raw_hid.h" in their own code
-	// and implement this function there. Leave this as weak linkage
-	// so users can opt to not handle data coming in.
+__attribute__((weak)) void raw_hid_receive(uint8_t *data, uint8_t length) {
+    // Users should #include "raw_hid.h" in their own code
+    // and implement this function there. Leave this as weak linkage
+    // so users can opt to not handle data coming in.
 }
 
 /** \brief Raw HID Task
  *
  * FIXME: Needs doc
  */
-static void raw_hid_task(void)
-{
-	// Create a temporary buffer to hold the read in data from the host
-	uint8_t data[RAW_EPSIZE];
-	bool data_read = false;
-
-	// Device must be connected and configured for the task to run
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	return;
-
-	Endpoint_SelectEndpoint(RAW_OUT_EPNUM);
-
-	// Check to see if a packet has been sent from the host
-	if (Endpoint_IsOUTReceived())
-	{
-		// Check to see if the packet contains data
-		if (Endpoint_IsReadWriteAllowed())
-		{
-			/* Read data */
-			Endpoint_Read_Stream_LE(data, sizeof(data), NULL);
-			data_read = true;
-		}
-
-		// Finalize the stream transfer to receive the last packet
-		Endpoint_ClearOUT();
-
-		if ( data_read )
-		{
-			raw_hid_receive( data, sizeof(data) );
-		}
-	}
+static void raw_hid_task(void) {
+    // Create a temporary buffer to hold the read in data from the host
+    uint8_t data[RAW_EPSIZE];
+    bool    data_read = false;
+
+    // Device must be connected and configured for the task to run
+    if (USB_DeviceState != DEVICE_STATE_Configured) return;
+
+    Endpoint_SelectEndpoint(RAW_OUT_EPNUM);
+
+    // Check to see if a packet has been sent from the host
+    if (Endpoint_IsOUTReceived()) {
+        // Check to see if the packet contains data
+        if (Endpoint_IsReadWriteAllowed()) {
+            /* Read data */
+            Endpoint_Read_Stream_LE(data, sizeof(data), NULL);
+            data_read = true;
+        }
+
+        // Finalize the stream transfer to receive the last packet
+        Endpoint_ClearOUT();
+
+        if (data_read) {
+            raw_hid_receive(data, sizeof(data));
+        }
+    }
 }
 #endif
 
@@ -235,15 +218,13 @@ static void raw_hid_task(void)
  *
  * FIXME: Needs doc
  */
-static void Console_Task(void)
-{
+static void Console_Task(void) {
     /* Device must be connected and configured for the task to run */
-    if (USB_DeviceState != DEVICE_STATE_Configured)
-        return;
+    if (USB_DeviceState != DEVICE_STATE_Configured) return;
 
     uint8_t ep = Endpoint_GetCurrentEndpoint();
 
-#if 0
+#    if 0
     // TODO: impl receivechar()/recvchar()
     Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
 
@@ -266,7 +247,7 @@ static void Console_Task(void)
         /* Finalize the stream transfer to send the last packet */
         Endpoint_ClearOUT();
     }
-#endif
+#    endif
 
     /* IN packet */
     Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
@@ -276,8 +257,7 @@ static void Console_Task(void)
     }
 
     // fill empty bank
-    while (Endpoint_IsReadWriteAllowed())
-        Endpoint_Write_8(0);
+    while (Endpoint_IsReadWriteAllowed()) Endpoint_Write_8(0);
 
     // flash senchar packet
     if (Endpoint_IsINReady()) {
@@ -288,7 +268,6 @@ static void Console_Task(void)
 }
 #endif
 
-
 /*******************************************************************************
  * USB Events
  ******************************************************************************/
@@ -298,13 +277,12 @@ static void Console_Task(void)
  * 1) EVENT_USB_Device_Suspend
  * 2) EVENT_USB_Device_Reset
  * 3) EVENT_USB_Device_Wake
-*/
+ */
 /** \brief Event USB Device Connect
  *
  * FIXME: Needs doc
  */
-void EVENT_USB_Device_Connect(void)
-{
+void EVENT_USB_Device_Connect(void) {
     print("[C]");
     /* For battery powered device */
     if (!USB_IsInitialized) {
@@ -318,35 +296,30 @@ void EVENT_USB_Device_Connect(void)
  *
  * FIXME: Needs doc
  */
-void EVENT_USB_Device_Disconnect(void)
-{
+void EVENT_USB_Device_Disconnect(void) {
     print("[D]");
     /* For battery powered device */
     USB_IsInitialized = false;
-/* TODO: This doesn't work. After several plug in/outs can not be enumerated.
-    if (USB_IsInitialized) {
-        USB_Disable();  // Disable all interrupts
-	USB_Controller_Enable();
-        USB_INT_Enable(USB_INT_VBUSTI);
-    }
-*/
+    /* TODO: This doesn't work. After several plug in/outs can not be enumerated.
+        if (USB_IsInitialized) {
+            USB_Disable();  // Disable all interrupts
+        USB_Controller_Enable();
+            USB_INT_Enable(USB_INT_VBUSTI);
+        }
+    */
 }
 
 /** \brief Event USB Device Connect
  *
  * FIXME: Needs doc
  */
-void EVENT_USB_Device_Reset(void)
-{
-    print("[R]");
-}
+void EVENT_USB_Device_Reset(void) { print("[R]"); }
 
 /** \brief Event USB Device Connect
  *
  * FIXME: Needs doc
  */
-void EVENT_USB_Device_Suspend()
-{
+void EVENT_USB_Device_Suspend() {
     print("[S]");
 #ifdef SLEEP_LED_ENABLE
     sleep_led_enable();
@@ -357,8 +330,7 @@ void EVENT_USB_Device_Suspend()
  *
  * FIXME: Needs doc
  */
-void EVENT_USB_Device_WakeUp()
-{
+void EVENT_USB_Device_WakeUp() {
     print("[W]");
     suspend_wakeup_init();
 
@@ -369,23 +341,19 @@ void EVENT_USB_Device_WakeUp()
 #endif
 }
 
-
-
 #ifdef CONSOLE_ENABLE
 static bool console_flush = false;
-#define CONSOLE_FLUSH_SET(b)   do { \
-  ATOMIC_BLOCK(ATOMIC_RESTORESTATE) {\
-    console_flush = b; \
-  } \
-} while (0)
+#    define CONSOLE_FLUSH_SET(b)                                     \
+        do {                                                         \
+            ATOMIC_BLOCK(ATOMIC_RESTORESTATE) { console_flush = b; } \
+        } while (0)
 
 /** \brief Event USB Device Start Of Frame
  *
  * FIXME: Needs doc
  * called every 1ms
  */
-void EVENT_USB_Device_StartOfFrame(void)
-{
+void EVENT_USB_Device_StartOfFrame(void) {
     static uint8_t count;
     if (++count % 50) return;
     count = 0;
@@ -404,44 +372,37 @@ void EVENT_USB_Device_StartOfFrame(void)
  * ATMega32u2 supports dual bank(ping-pong mode) only on endpoint 3 and 4,
  * it is safe to use single bank for all endpoints.
  */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
+void EVENT_USB_Device_ConfigurationChanged(void) {
     bool ConfigSuccess = true;
 
     /* Setup Keyboard HID Report Endpoints */
 #ifndef KEYBOARD_SHARED_EP
-    ConfigSuccess &= ENDPOINT_CONFIG(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
-                                     KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE);
+    ConfigSuccess &= ENDPOINT_CONFIG(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE);
 #endif
 
 #if defined(MOUSE_ENABLE) && !defined(MOUSE_SHARED_EP)
     /* Setup Mouse HID Report Endpoint */
-    ConfigSuccess &= ENDPOINT_CONFIG(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
-                                     MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE);
+    ConfigSuccess &= ENDPOINT_CONFIG(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE);
 #endif
 
 #ifdef SHARED_EP_ENABLE
     /* Setup Shared HID Report Endpoint */
-    ConfigSuccess &= ENDPOINT_CONFIG(SHARED_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
-                                     SHARED_EPSIZE, ENDPOINT_BANK_SINGLE);
+    ConfigSuccess &= ENDPOINT_CONFIG(SHARED_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, SHARED_EPSIZE, ENDPOINT_BANK_SINGLE);
 #endif
 
 #ifdef RAW_ENABLE
     /* Setup Raw HID Report Endpoints */
-    ConfigSuccess &= ENDPOINT_CONFIG(RAW_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
-									 RAW_EPSIZE, ENDPOINT_BANK_SINGLE);
-    ConfigSuccess &= ENDPOINT_CONFIG(RAW_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
-									 RAW_EPSIZE, ENDPOINT_BANK_SINGLE);
+    ConfigSuccess &= ENDPOINT_CONFIG(RAW_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, RAW_EPSIZE, ENDPOINT_BANK_SINGLE);
+    ConfigSuccess &= ENDPOINT_CONFIG(RAW_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, RAW_EPSIZE, ENDPOINT_BANK_SINGLE);
 #endif
 
 #ifdef CONSOLE_ENABLE
     /* Setup Console HID Report Endpoints */
-    ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
-                                     CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
-#if 0
+    ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
+#    if 0
     ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
                                      CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
-#endif
+#    endif
 #endif
 
 #ifdef MIDI_ENABLE
@@ -473,26 +434,23 @@ Other Device    Required    Optional    Optional    Optional    Optional    Opti
  *
  *  This is fired before passing along unhandled control requests to the library for processing internally.
  */
-void EVENT_USB_Device_ControlRequest(void)
-{
-    uint8_t* ReportData = NULL;
+void EVENT_USB_Device_ControlRequest(void) {
+    uint8_t *ReportData = NULL;
     uint8_t  ReportSize = 0;
 
     /* Handle HID Class specific requests */
-    switch (USB_ControlRequest.bRequest)
-    {
+    switch (USB_ControlRequest.bRequest) {
         case HID_REQ_GetReport:
-            if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-            {
+            if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) {
                 Endpoint_ClearSETUP();
 
                 // Interface
                 switch (USB_ControlRequest.wIndex) {
-                case KEYBOARD_INTERFACE:
-                    // TODO: test/check
-                    ReportData = (uint8_t*)&keyboard_report_sent;
-                    ReportSize = sizeof(keyboard_report_sent);
-                    break;
+                    case KEYBOARD_INTERFACE:
+                        // TODO: test/check
+                        ReportData = (uint8_t *)&keyboard_report_sent;
+                        ReportSize = sizeof(keyboard_report_sent);
+                        break;
                 }
 
                 /* Write the report data to the control endpoint */
@@ -502,47 +460,43 @@ void EVENT_USB_Device_ControlRequest(void)
 
             break;
         case HID_REQ_SetReport:
-            if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-            {
-
+            if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) {
                 // Interface
                 switch (USB_ControlRequest.wIndex) {
-                case KEYBOARD_INTERFACE:
+                    case KEYBOARD_INTERFACE:
 #if defined(SHARED_EP_ENABLE) && !defined(KEYBOARD_SHARED_EP)
-                case SHARED_INTERFACE:
+                    case SHARED_INTERFACE:
 #endif
-                    Endpoint_ClearSETUP();
+                        Endpoint_ClearSETUP();
 
-                    while (!(Endpoint_IsOUTReceived())) {
-                        if (USB_DeviceState == DEVICE_STATE_Unattached)
-                          return;
-                    }
+                        while (!(Endpoint_IsOUTReceived())) {
+                            if (USB_DeviceState == DEVICE_STATE_Unattached) return;
+                        }
 
-                    if (Endpoint_BytesInEndpoint() == 2) {
-                      uint8_t report_id = Endpoint_Read_8();
+                        if (Endpoint_BytesInEndpoint() == 2) {
+                            uint8_t report_id = Endpoint_Read_8();
 
-                      if (report_id == REPORT_ID_KEYBOARD || report_id == REPORT_ID_NKRO) {
-                        keyboard_led_stats = Endpoint_Read_8();
-                      }
-                    } else {
-                      keyboard_led_stats = Endpoint_Read_8();
-                    }
+                            if (report_id == REPORT_ID_KEYBOARD || report_id == REPORT_ID_NKRO) {
+                                keyboard_led_stats = Endpoint_Read_8();
+                            }
+                        } else {
+                            keyboard_led_stats = Endpoint_Read_8();
+                        }
 
-                    Endpoint_ClearOUT();
-                    Endpoint_ClearStatusStage();
-                    break;
+                        Endpoint_ClearOUT();
+                        Endpoint_ClearStatusStage();
+                        break;
                 }
-
             }
 
             break;
 
         case HID_REQ_GetProtocol:
-            if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-            {
+            if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) {
                 if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
                     Endpoint_ClearSETUP();
-                    while (!(Endpoint_IsINReady()));
+                    while (!(Endpoint_IsINReady()))
+                        ;
                     Endpoint_Write_8(keyboard_protocol);
                     Endpoint_ClearIN();
                     Endpoint_ClearStatusStage();
@@ -551,8 +505,7 @@ void EVENT_USB_Device_ControlRequest(void)
 
             break;
         case HID_REQ_SetProtocol:
-            if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-            {
+            if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) {
                 if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) {
                     Endpoint_ClearSETUP();
                     Endpoint_ClearStatusStage();
@@ -564,8 +517,7 @@ void EVENT_USB_Device_ControlRequest(void)
 
             break;
         case HID_REQ_SetIdle:
-            if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
-            {
+            if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) {
                 Endpoint_ClearSETUP();
                 Endpoint_ClearStatusStage();
 
@@ -574,10 +526,10 @@ void EVENT_USB_Device_ControlRequest(void)
 
             break;
         case HID_REQ_GetIdle:
-            if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
-            {
+            if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) {
                 Endpoint_ClearSETUP();
-                while (!(Endpoint_IsINReady()));
+                while (!(Endpoint_IsINReady()))
+                    ;
                 Endpoint_Write_8(keyboard_idle);
                 Endpoint_ClearIN();
                 Endpoint_ClearStatusStage();
@@ -598,54 +550,50 @@ void EVENT_USB_Device_ControlRequest(void)
  *
  * FIXME: Needs doc
  */
-static uint8_t keyboard_leds(void)
-{
-    return keyboard_led_stats;
-}
+static uint8_t keyboard_leds(void) { return keyboard_led_stats; }
 
 /** \brief Send Keyboard
  *
  * FIXME: Needs doc
  */
-static void send_keyboard(report_keyboard_t *report)
-{
+static void send_keyboard(report_keyboard_t *report) {
     uint8_t timeout = 255;
-    uint8_t where = where_to_send();
+    uint8_t where   = where_to_send();
 
 #ifdef BLUETOOTH_ENABLE
-  if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
-    #ifdef MODULE_ADAFRUIT_BLE
-      adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys));
-    #elif MODULE_RN42
-      bluefruit_serial_send(0xFD);
-      bluefruit_serial_send(0x09);
-      bluefruit_serial_send(0x01);
-      bluefruit_serial_send(report->mods);
-      bluefruit_serial_send(report->reserved);
-      for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) {
-        bluefruit_serial_send(report->keys[i]);
-      }
-    #else
-      bluefruit_serial_send(0xFD);
-      bluefruit_serial_send(report->mods);
-      bluefruit_serial_send(report->reserved);
-      for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) {
-        bluefruit_serial_send(report->keys[i]);
-      }
-    #endif
-  }
+    if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
+#    ifdef MODULE_ADAFRUIT_BLE
+        adafruit_ble_send_keys(report->mods, report->keys, sizeof(report->keys));
+#    elif MODULE_RN42
+        bluefruit_serial_send(0xFD);
+        bluefruit_serial_send(0x09);
+        bluefruit_serial_send(0x01);
+        bluefruit_serial_send(report->mods);
+        bluefruit_serial_send(report->reserved);
+        for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) {
+            bluefruit_serial_send(report->keys[i]);
+        }
+#    else
+        bluefruit_serial_send(0xFD);
+        bluefruit_serial_send(report->mods);
+        bluefruit_serial_send(report->reserved);
+        for (uint8_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) {
+            bluefruit_serial_send(report->keys[i]);
+        }
+#    endif
+    }
 #endif
 
     if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
-      return;
+        return;
     }
 
     /* Select the Keyboard Report Endpoint */
-    uint8_t ep = KEYBOARD_IN_EPNUM;
+    uint8_t ep   = KEYBOARD_IN_EPNUM;
     uint8_t size = KEYBOARD_REPORT_SIZE;
 #ifdef NKRO_ENABLE
     if (keyboard_protocol && keymap_config.nkro) {
-        ep = SHARED_IN_EPNUM;
+        ep   = SHARED_IN_EPNUM;
         size = sizeof(struct nkro_report);
     }
 #endif
@@ -666,38 +614,37 @@ static void send_keyboard(report_keyboard_t *report)
 
     keyboard_report_sent = *report;
 }
- 
+
 /** \brief Send Mouse
  *
  * FIXME: Needs doc
  */
-static void send_mouse(report_mouse_t *report)
-{
+static void send_mouse(report_mouse_t *report) {
 #ifdef MOUSE_ENABLE
     uint8_t timeout = 255;
-    uint8_t where = where_to_send();
+    uint8_t where   = where_to_send();
 
-#ifdef BLUETOOTH_ENABLE
-  if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
-    #ifdef MODULE_ADAFRUIT_BLE
-      // FIXME: mouse buttons
-      adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h, report->buttons);
-    #else
-      bluefruit_serial_send(0xFD);
-      bluefruit_serial_send(0x00);
-      bluefruit_serial_send(0x03);
-      bluefruit_serial_send(report->buttons);
-      bluefruit_serial_send(report->x);
-      bluefruit_serial_send(report->y);
-      bluefruit_serial_send(report->v); // should try sending the wheel v here
-      bluefruit_serial_send(report->h); // should try sending the wheel h here
-      bluefruit_serial_send(0x00);
-    #endif
-  }
-#endif
+#    ifdef BLUETOOTH_ENABLE
+    if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
+#        ifdef MODULE_ADAFRUIT_BLE
+        // FIXME: mouse buttons
+        adafruit_ble_send_mouse_move(report->x, report->y, report->v, report->h, report->buttons);
+#        else
+        bluefruit_serial_send(0xFD);
+        bluefruit_serial_send(0x00);
+        bluefruit_serial_send(0x03);
+        bluefruit_serial_send(report->buttons);
+        bluefruit_serial_send(report->x);
+        bluefruit_serial_send(report->y);
+        bluefruit_serial_send(report->v);  // should try sending the wheel v here
+        bluefruit_serial_send(report->h);  // should try sending the wheel h here
+        bluefruit_serial_send(0x00);
+#        endif
+    }
+#    endif
 
     if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
-      return;
+        return;
     }
 
     /* Select the Mouse Report Endpoint */
@@ -719,18 +666,13 @@ static void send_mouse(report_mouse_t *report)
  *
  * FIXME: Needs doc
  */
-static void send_system(uint16_t data)
-{
+static void send_system(uint16_t data) {
 #ifdef EXTRAKEY_ENABLE
     uint8_t timeout = 255;
 
-    if (USB_DeviceState != DEVICE_STATE_Configured)
-        return;
+    if (USB_DeviceState != DEVICE_STATE_Configured) return;
 
-    report_extra_t r = {
-        .report_id = REPORT_ID_SYSTEM,
-        .usage = data - SYSTEM_POWER_DOWN + 1
-    };
+    report_extra_t r = {.report_id = REPORT_ID_SYSTEM, .usage = data - SYSTEM_POWER_DOWN + 1};
     Endpoint_SelectEndpoint(SHARED_IN_EPNUM);
 
     /* Check if write ready for a polling interval around 10ms */
@@ -746,52 +688,48 @@ static void send_system(uint16_t data)
  *
  * FIXME: Needs doc
  */
-static void send_consumer(uint16_t data)
-{
+static void send_consumer(uint16_t data) {
 #ifdef EXTRAKEY_ENABLE
     uint8_t timeout = 255;
-    uint8_t where = where_to_send();
+    uint8_t where   = where_to_send();
 
-#ifdef BLUETOOTH_ENABLE
+#    ifdef BLUETOOTH_ENABLE
     if (where == OUTPUT_BLUETOOTH || where == OUTPUT_USB_AND_BT) {
-      #ifdef MODULE_ADAFRUIT_BLE
+#        ifdef MODULE_ADAFRUIT_BLE
         adafruit_ble_send_consumer_key(data, 0);
-      #elif MODULE_RN42
+#        elif MODULE_RN42
         static uint16_t last_data = 0;
         if (data == last_data) return;
-        last_data = data;
+        last_data       = data;
         uint16_t bitmap = CONSUMER2RN42(data);
         bluefruit_serial_send(0xFD);
         bluefruit_serial_send(0x03);
         bluefruit_serial_send(0x03);
-        bluefruit_serial_send(bitmap&0xFF);
-        bluefruit_serial_send((bitmap>>8)&0xFF);
-      #else
+        bluefruit_serial_send(bitmap & 0xFF);
+        bluefruit_serial_send((bitmap >> 8) & 0xFF);
+#        else
         static uint16_t last_data = 0;
         if (data == last_data) return;
-        last_data = data;
+        last_data       = data;
         uint16_t bitmap = CONSUMER2BLUEFRUIT(data);
         bluefruit_serial_send(0xFD);
         bluefruit_serial_send(0x00);
         bluefruit_serial_send(0x02);
-        bluefruit_serial_send((bitmap>>8)&0xFF);
-        bluefruit_serial_send(bitmap&0xFF);
+        bluefruit_serial_send((bitmap >> 8) & 0xFF);
+        bluefruit_serial_send(bitmap & 0xFF);
         bluefruit_serial_send(0x00);
         bluefruit_serial_send(0x00);
         bluefruit_serial_send(0x00);
         bluefruit_serial_send(0x00);
-      #endif
+#        endif
     }
-#endif
+#    endif
 
     if (where != OUTPUT_USB && where != OUTPUT_USB_AND_BT) {
-      return;
+        return;
     }
 
-    report_extra_t r = {
-        .report_id = REPORT_ID_CONSUMER,
-        .usage = data
-    };
+    report_extra_t r = {.report_id = REPORT_ID_CONSUMER, .usage = data};
     Endpoint_SelectEndpoint(SHARED_IN_EPNUM);
 
     /* Check if write ready for a polling interval around 10ms */
@@ -803,18 +741,16 @@ static void send_consumer(uint16_t data)
 #endif
 }
 
-
 /*******************************************************************************
  * sendchar
  ******************************************************************************/
 #ifdef CONSOLE_ENABLE
-#define SEND_TIMEOUT 5
+#    define SEND_TIMEOUT 5
 /** \brief Send Char
  *
  * FIXME: Needs doc
  */
-int8_t sendchar(uint8_t c)
-{
+int8_t sendchar(uint8_t c) {
     // Not wait once timeouted.
     // Because sendchar() is called so many times, waiting each call causes big lag.
     static bool timeouted = false;
@@ -823,8 +759,7 @@ int8_t sendchar(uint8_t c)
     // or char will be lost. These two function is mutually exclusive.
     CONSOLE_FLUSH_SET(false);
 
-    if (USB_DeviceState != DEVICE_STATE_Configured)
-        return -1;
+    if (USB_DeviceState != DEVICE_STATE_Configured) return -1;
 
     uint8_t ep = Endpoint_GetCurrentEndpoint();
     Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
@@ -857,7 +792,8 @@ int8_t sendchar(uint8_t c)
 
     // send when bank is full
     if (!Endpoint_IsReadWriteAllowed()) {
-        while (!(Endpoint_IsINReady()));
+        while (!(Endpoint_IsINReady()))
+            ;
         Endpoint_ClearIN();
     } else {
         CONSOLE_FLUSH_SET(true);
@@ -870,10 +806,7 @@ ERROR_EXIT:
     return -1;
 }
 #else
-int8_t sendchar(uint8_t c)
-{
-    return 0;
-}
+int8_t sendchar(uint8_t c) { return 0; }
 #endif
 
 /*******************************************************************************
@@ -881,33 +814,28 @@ int8_t sendchar(uint8_t c)
  ******************************************************************************/
 
 #ifdef MIDI_ENABLE
-USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface =
-{
-  .Config =
-  {
-    .StreamingInterfaceNumber = AS_INTERFACE,
-    .DataINEndpoint           =
-    {
-      .Address          = MIDI_STREAM_IN_EPADDR,
-      .Size             = MIDI_STREAM_EPSIZE,
-      .Banks            = 1,
-    },
-    .DataOUTEndpoint          =
-    {
-      .Address          = MIDI_STREAM_OUT_EPADDR,
-      .Size             = MIDI_STREAM_EPSIZE,
-      .Banks            = 1,
-    },
-  },
+USB_ClassInfo_MIDI_Device_t USB_MIDI_Interface = {
+    .Config =
+        {
+            .StreamingInterfaceNumber = AS_INTERFACE,
+            .DataINEndpoint =
+                {
+                    .Address = MIDI_STREAM_IN_EPADDR,
+                    .Size    = MIDI_STREAM_EPSIZE,
+                    .Banks   = 1,
+                },
+            .DataOUTEndpoint =
+                {
+                    .Address = MIDI_STREAM_OUT_EPADDR,
+                    .Size    = MIDI_STREAM_EPSIZE,
+                    .Banks   = 1,
+                },
+        },
 };
 
-void send_midi_packet(MIDI_EventPacket_t* event) {
-  MIDI_Device_SendEventPacket(&USB_MIDI_Interface, event);
-}
+void send_midi_packet(MIDI_EventPacket_t *event) { MIDI_Device_SendEventPacket(&USB_MIDI_Interface, event); }
 
-bool recv_midi_packet(MIDI_EventPacket_t* const event) {
-  return MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, event);
-}
+bool recv_midi_packet(MIDI_EventPacket_t *const event) { return MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, event); }
 
 #endif
 
@@ -920,66 +848,60 @@ bool recv_midi_packet(MIDI_EventPacket_t* const event) {
  *
  * FIXME: Needs doc
  */
-void virtser_init(void)
-{
-  cdc_device.State.ControlLineStates.DeviceToHost = CDC_CONTROL_LINE_IN_DSR ;
-  CDC_Device_SendControlLineStateChange(&cdc_device);
+void virtser_init(void) {
+    cdc_device.State.ControlLineStates.DeviceToHost = CDC_CONTROL_LINE_IN_DSR;
+    CDC_Device_SendControlLineStateChange(&cdc_device);
 }
 
 /** \brief Virtual Serial Receive
  *
  * FIXME: Needs doc
  */
-void virtser_recv(uint8_t c) __attribute__ ((weak));
-void virtser_recv(uint8_t c)
-{
-  // Ignore by default
+void virtser_recv(uint8_t c) __attribute__((weak));
+void virtser_recv(uint8_t c) {
+    // Ignore by default
 }
 
 /** \brief Virtual Serial Task
  *
  * FIXME: Needs doc
  */
-void virtser_task(void)
-{
-  uint16_t count = CDC_Device_BytesReceived(&cdc_device);
-  uint8_t ch;
-  if (count)
-  {
-    ch = CDC_Device_ReceiveByte(&cdc_device);
-    virtser_recv(ch);
-  }
+void virtser_task(void) {
+    uint16_t count = CDC_Device_BytesReceived(&cdc_device);
+    uint8_t  ch;
+    if (count) {
+        ch = CDC_Device_ReceiveByte(&cdc_device);
+        virtser_recv(ch);
+    }
 }
 /** \brief Virtual Serial Send
  *
  * FIXME: Needs doc
  */
-void virtser_send(const uint8_t byte)
-{
-  uint8_t timeout = 255;
-  uint8_t ep = Endpoint_GetCurrentEndpoint();
+void virtser_send(const uint8_t byte) {
+    uint8_t timeout = 255;
+    uint8_t ep      = Endpoint_GetCurrentEndpoint();
 
-  if (cdc_device.State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR)
-  {
-    /* IN packet */
-    Endpoint_SelectEndpoint(cdc_device.Config.DataINEndpoint.Address);
+    if (cdc_device.State.ControlLineStates.HostToDevice & CDC_CONTROL_LINE_OUT_DTR) {
+        /* IN packet */
+        Endpoint_SelectEndpoint(cdc_device.Config.DataINEndpoint.Address);
 
-    if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
-        Endpoint_SelectEndpoint(ep);
-        return;
-    }
+        if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
+            Endpoint_SelectEndpoint(ep);
+            return;
+        }
 
-    while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+        while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
 
-    Endpoint_Write_8(byte);
-    CDC_Device_Flush(&cdc_device);
+        Endpoint_Write_8(byte);
+        CDC_Device_Flush(&cdc_device);
 
-    if (Endpoint_IsINReady()) {
-      Endpoint_ClearIN();
-    }
+        if (Endpoint_IsINReady()) {
+            Endpoint_ClearIN();
+        }
 
-    Endpoint_SelectEndpoint(ep);
-  }
+        Endpoint_SelectEndpoint(ep);
+    }
 }
 #endif
 
@@ -990,8 +912,7 @@ void virtser_send(const uint8_t byte)
  *
  * FIXME: Needs doc
  */
-static void setup_mcu(void)
-{
+static void setup_mcu(void) {
     /* Disable watchdog if enabled by bootloader/fuses */
     MCUSR &= ~(1 << WDRF);
     wdt_disable();
@@ -1007,8 +928,7 @@ static void setup_mcu(void)
  *
  * FIXME: Needs doc
  */
-static void setup_usb(void)
-{
+static void setup_usb(void) {
     // Leonardo needs. Without this USB device is not recognized.
     USB_Disable();
 
@@ -1023,9 +943,8 @@ static void setup_usb(void)
  *
  * FIXME: Needs doc
  */
-int main(void)  __attribute__ ((weak));
-int main(void)
-{
+int main(void) __attribute__((weak));
+int main(void) {
 #ifdef MIDI_ENABLE
     setup_midi();
 #endif
@@ -1043,11 +962,11 @@ int main(void)
 
 #ifdef WAIT_FOR_USB
     while (USB_DeviceState != DEVICE_STATE_Configured) {
-    #if defined(INTERRUPT_CONTROL_ENDPOINT)
-            ;
-    #else
-            USB_USBTask();
-    #endif
+#    if defined(INTERRUPT_CONTROL_ENDPOINT)
+        ;
+#    else
+        USB_USBTask();
+#    endif
     }
     print("USB configured.\n");
 #else
@@ -1066,15 +985,15 @@ int main(void)
 
     print("Keyboard start.\n");
     while (1) {
-        #if !defined(NO_USB_STARTUP_CHECK)
+#if !defined(NO_USB_STARTUP_CHECK)
         while (USB_DeviceState == DEVICE_STATE_Suspended) {
             print("[s]");
             suspend_power_down();
             if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
-                    USB_Device_SendRemoteWakeup();
+                USB_Device_SendRemoteWakeup();
             }
         }
-        #endif
+#endif
 
         keyboard_task();
 
@@ -1102,14 +1021,7 @@ int main(void)
 #if !defined(INTERRUPT_CONTROL_ENDPOINT)
         USB_USBTask();
 #endif
-
     }
 }
 
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
-                                    const uint16_t wIndex,
-                                    const void** const DescriptorAddress)
-{
-  return get_usb_descriptor(wValue, wIndex, DescriptorAddress);
-}
-
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint16_t wIndex, const void **const DescriptorAddress) { return get_usb_descriptor(wValue, wIndex, DescriptorAddress); }