diff options
| -rw-r--r-- | keyboards/minidox/config.h | 9 | ||||
| -rw-r--r-- | keyboards/minidox/eeprom-lefthand.eep | 2 | ||||
| -rw-r--r-- | keyboards/minidox/eeprom-righthand.eep | 2 | ||||
| -rw-r--r-- | keyboards/minidox/i2c.c | 162 | ||||
| -rw-r--r-- | keyboards/minidox/i2c.h | 49 | ||||
| -rw-r--r-- | keyboards/minidox/matrix.c | 307 | ||||
| -rw-r--r-- | keyboards/minidox/minidox.h | 5 | ||||
| -rw-r--r-- | keyboards/minidox/readme.md | 66 | ||||
| -rw-r--r-- | keyboards/minidox/rev1/config.h | 12 | ||||
| -rw-r--r-- | keyboards/minidox/rev1/rev1.h | 7 | ||||
| -rw-r--r-- | keyboards/minidox/rules.mk | 38 | ||||
| -rw-r--r-- | keyboards/minidox/serial.c | 228 | ||||
| -rw-r--r-- | keyboards/minidox/serial.h | 26 | ||||
| -rw-r--r-- | keyboards/minidox/split_util.c | 84 | ||||
| -rw-r--r-- | keyboards/minidox/split_util.h | 20 |
15 files changed, 32 insertions, 985 deletions
diff --git a/keyboards/minidox/config.h b/keyboards/minidox/config.h index 7502983b6..b3d375656 100644 --- a/keyboards/minidox/config.h +++ b/keyboards/minidox/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -61,9 +60,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - -#ifdef SUBPROJECT_rev1 - #include "rev1/config.h" -#endif - -#endif diff --git a/keyboards/minidox/eeprom-lefthand.eep b/keyboards/minidox/eeprom-lefthand.eep deleted file mode 100644 index e5a7bc1e5..000000000 --- a/keyboards/minidox/eeprom-lefthand.eep +++ /dev/null @@ -1,2 +0,0 @@ -:0F000000000000000000000000000000000001F0
-:00000001FF
diff --git a/keyboards/minidox/eeprom-righthand.eep b/keyboards/minidox/eeprom-righthand.eep deleted file mode 100644 index 7ea44f52e..000000000 --- a/keyboards/minidox/eeprom-righthand.eep +++ /dev/null @@ -1,2 +0,0 @@ -:0F000000000000000000000000000000000000F1
-:00000001FF
diff --git a/keyboards/minidox/i2c.c b/keyboards/minidox/i2c.c deleted file mode 100644 index 084c890c4..000000000 --- a/keyboards/minidox/i2c.c +++ /dev/null @@ -1,162 +0,0 @@ -#include <util/twi.h> -#include <avr/io.h> -#include <stdlib.h> -#include <avr/interrupt.h> -#include <util/twi.h> -#include <stdbool.h> -#include "i2c.h" - -#ifdef USE_I2C - -// Limits the amount of we wait for any one i2c transaction. -// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is -// 9 bits, a single transaction will take around 90μs to complete. -// -// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit -// poll loop takes at least 8 clock cycles to execute -#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 - -#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) - -volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -static volatile uint8_t slave_buffer_pos; -static volatile bool slave_has_register_set = false; - -// Wait for an i2c operation to finish -inline static -void i2c_delay(void) { - uint16_t lim = 0; - while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT) - lim++; - - // easier way, but will wait slightly longer - // _delay_us(100); -} - -// Setup twi to run at 100kHz -void i2c_master_init(void) { - // no prescaler - TWSR = 0; - // Set TWI clock frequency to SCL_CLOCK. Need TWBR>10. - // Check datasheets for more info. - TWBR = ((F_CPU/SCL_CLOCK)-16)/2; -} - -// Start a transaction with the given i2c slave address. The direction of the -// transfer is set with I2C_READ and I2C_WRITE. -// returns: 0 => success -// 1 => error -uint8_t i2c_master_start(uint8_t address) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA); - - i2c_delay(); - - // check that we started successfully - if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START)) - return 1; - - TWDR = address; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) ) - return 1; // slave did not acknowledge - else - return 0; // success -} - - -// Finish the i2c transaction. -void i2c_master_stop(void) { - TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO); - - uint16_t lim = 0; - while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT) - lim++; -} - -// Write one byte to the i2c slave. -// returns 0 => slave ACK -// 1 => slave NACK -uint8_t i2c_master_write(uint8_t data) { - TWDR = data; - TWCR = (1<<TWINT) | (1<<TWEN); - - i2c_delay(); - - // check if the slave acknowledged us - return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1; -} - -// Read one byte from the i2c slave. If ack=1 the slave is acknowledged, -// if ack=0 the acknowledge bit is not set. -// returns: byte read from i2c device -uint8_t i2c_master_read(int ack) { - TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA); - - i2c_delay(); - return TWDR; -} - -void i2c_reset_state(void) { - TWCR = 0; -} - -void i2c_slave_init(uint8_t address) { - TWAR = address << 0; // slave i2c address - // TWEN - twi enable - // TWEA - enable address acknowledgement - // TWINT - twi interrupt flag - // TWIE - enable the twi interrupt - TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN); -} - -ISR(TWI_vect); - -ISR(TWI_vect) { - uint8_t ack = 1; - switch(TW_STATUS) { - case TW_SR_SLA_ACK: - // this device has been addressed as a slave receiver - slave_has_register_set = false; - break; - - case TW_SR_DATA_ACK: - // this device has received data as a slave receiver - // The first byte that we receive in this transaction sets the location - // of the read/write location of the slaves memory that it exposes over - // i2c. After that, bytes will be written at slave_buffer_pos, incrementing - // slave_buffer_pos after each write. - if(!slave_has_register_set) { - slave_buffer_pos = TWDR; - // don't acknowledge the master if this memory loctaion is out of bounds - if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) { - ack = 0; - slave_buffer_pos = 0; - } - slave_has_register_set = true; - } else { - i2c_slave_buffer[slave_buffer_pos] = TWDR; - BUFFER_POS_INC(); - } - break; - - case TW_ST_SLA_ACK: - case TW_ST_DATA_ACK: - // master has addressed this device as a slave transmitter and is - // requesting data. - TWDR = i2c_slave_buffer[slave_buffer_pos]; - BUFFER_POS_INC(); - break; - - case TW_BUS_ERROR: // something went wrong, reset twi state - TWCR = 0; - default: - break; - } - // Reset everything, so we are ready for the next TWI interrupt - TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN); -} -#endif diff --git a/keyboards/minidox/i2c.h b/keyboards/minidox/i2c.h deleted file mode 100644 index c15b6bc50..000000000 --- a/keyboards/minidox/i2c.h +++ /dev/null @@ -1,49 +0,0 @@ -#ifndef I2C_H -#define I2C_H - -#include <stdint.h> - -#ifndef F_CPU -#define F_CPU 16000000UL -#endif - -#define I2C_READ 1 -#define I2C_WRITE 0 - -#define I2C_ACK 1 -#define I2C_NACK 0 - -#define SLAVE_BUFFER_SIZE 0x10 - -// i2c SCL clock frequency -#define SCL_CLOCK 400000L - -extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; - -void i2c_master_init(void); -uint8_t i2c_master_start(uint8_t address); -void i2c_master_stop(void); -uint8_t i2c_master_write(uint8_t data); -uint8_t i2c_master_read(int); -void i2c_reset_state(void); -void i2c_slave_init(uint8_t address); - - -static inline unsigned char i2c_start_read(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_READ); -} - -static inline unsigned char i2c_start_write(unsigned char addr) { - return i2c_master_start((addr << 1) | I2C_WRITE); -} - -// from SSD1306 scrips -extern unsigned char i2c_rep_start(unsigned char addr); -extern void i2c_start_wait(unsigned char addr); -extern unsigned char i2c_readAck(void); -extern unsigned char i2c_readNak(void); -extern unsigned char i2c_read(unsigned char ack); - -#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); - -#endif diff --git a/keyboards/minidox/matrix.c b/keyboards/minidox/matrix.c deleted file mode 100644 index 27a38dca0..000000000 --- a/keyboards/minidox/matrix.c +++ /dev/null @@ -1,307 +0,0 @@ -/* -Copyright 2012 Jun Wako <wakojun@gmail.com> - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see <http://www.gnu.org/licenses/>. -*/ - -/* - * scan matrix - */ -#include <stdint.h> -#include <stdbool.h> -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include "print.h" -#include "debug.h" -#include "util.h" -#include "matrix.h" -#include "split_util.h" -#include "pro_micro.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else // USE_SERIAL -# include "serial.h" -#endif - -#ifndef DEBOUNCE -# define DEBOUNCE 5 -#endif - -#define ERROR_DISCONNECT_COUNT 5 - -static uint8_t debouncing = DEBOUNCE; -static const int ROWS_PER_HAND = MATRIX_ROWS/2; -static uint8_t error_count = 0; - -static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; -static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; - -/* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -static matrix_row_t read_cols(void); -static void init_cols(void); -static void unselect_rows(void); -static void select_row(uint8_t row); - - -__attribute__ ((weak)) -void matrix_init_kb(void) { - matrix_init_user(); -} - -__attribute__ ((weak)) -void matrix_scan_kb(void) { - matrix_scan_user(); -} - -__attribute__ ((weak)) -void matrix_init_user(void) { -} - -__attribute__ ((weak)) -void matrix_scan_user(void) { -} - -inline -uint8_t matrix_rows(void) -{ - return MATRIX_ROWS; -} - -inline -uint8_t matrix_cols(void) -{ - return MATRIX_COLS; -} - -void matrix_init(void) -{ - debug_enable = true; - debug_matrix = true; - debug_mouse = true; - // initialize row and col - unselect_rows(); - init_cols(); - - TX_RX_LED_INIT; - - // initialize matrix state: all keys off - for (uint8_t i=0; i < MATRIX_ROWS; i++) { - matrix[i] = 0; - matrix_debouncing[i] = 0; - } - - matrix_init_quantum(); -} - -uint8_t _matrix_scan(void) -{ - // Right hand is stored after the left in the matirx so, we need to offset it - int offset = isLeftHand ? 0 : (ROWS_PER_HAND); - - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - select_row(i); - _delay_us(30); // without this wait read unstable value. - matrix_row_t cols = read_cols(); - if (matrix_debouncing[i+offset] != cols) { - matrix_debouncing[i+offset] = cols; - debouncing = DEBOUNCE; - } - unselect_rows(); - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { - matrix[i+offset] = matrix_debouncing[i+offset]; - } - } - } - - return 1; -} - -#ifdef USE_I2C - -// Get rows from other half over i2c -int i2c_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); - if (err) goto i2c_error; - - // start of matrix stored at 0x00 - err = i2c_master_write(0x00); - if (err) goto i2c_error; - - // Start read - err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); - if (err) goto i2c_error; - - if (!err) { - int i; - for (i = 0; i < ROWS_PER_HAND-1; ++i) { - matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); - } - matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); - i2c_master_stop(); - } else { -i2c_error: // the cable is disconnceted, or something else went wrong - i2c_reset_state(); - return err; - } - - return 0; -} - -#else // USE_SERIAL - -int serial_transaction(void) { - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - - if (serial_update_buffers()) { - return 1; - } - - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = serial_slave_buffer[i]; - } - return 0; -} -#endif - -uint8_t matrix_scan(void) -{ - int ret = _matrix_scan(); - - - -#ifdef USE_I2C - if( i2c_transaction() ) { -#else // USE_SERIAL - if( serial_transaction() ) { -#endif - // turn on the indicator led when halves are disconnected - TXLED1; - - error_count++; - - if (error_count > ERROR_DISCONNECT_COUNT) { - // reset other half if disconnected - int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[slaveOffset+i] = 0; - } - } - } else { - // turn off the indicator led on no error - TXLED0; - error_count = 0; - } - matrix_scan_quantum(); - return ret; -} - -void matrix_slave_scan(void) { - _matrix_scan(); - - int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); - -#ifdef USE_I2C - for (int i = 0; i < ROWS_PER_HAND; ++i) { - /* i2c_slave_buffer[i] = matrix[offset+i]; */ - i2c_slave_buffer[i] = matrix[offset+i]; - } -#else // USE_SERIAL - for (int i = 0; i < ROWS_PER_HAND; ++i) { - serial_slave_buffer[i] = matrix[offset+i]; - } -#endif -} - -bool matrix_is_modified(void) -{ - if (debouncing) return false; - return true; -} - -inline -bool matrix_is_on(uint8_t row, uint8_t col) -{ - return (matrix[row] & ((matrix_row_t)1<<col)); -} - -inline -matrix_row_t matrix_get_row(uint8_t row) -{ - return matrix[row]; -} - -void matrix_print(void) -{ - print("\nr/c 0123456789ABCDEF\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - phex(row); print(": "); - pbin_reverse16(matrix_get_row(row)); - print("\n"); - } -} - -uint8_t matrix_key_count(void) -{ - uint8_t count = 0; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - count += bitpop16(matrix[i]); - } - return count; -} - -static void init_cols(void) -{ - for(int x = 0; x < MATRIX_COLS; x++) { - _SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF); - _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); - } -} - -static matrix_row_t read_cols(void) -{ - matrix_row_t result = 0; - for(int x = 0; x < MATRIX_COLS; x++) { - result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); - } - return result; -} - -static void unselect_rows(void) -{ - for(int x = 0; x < ROWS_PER_HAND; x++) { - _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); - _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); - } -} - -static void select_row(uint8_t row) -{ - _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); - _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); -} diff --git a/keyboards/minidox/minidox.h b/keyboards/minidox/minidox.h index 6e8add206..5d5ca9f50 100644 --- a/keyboards/minidox/minidox.h +++ b/keyboards/minidox/minidox.h @@ -1,10 +1,7 @@ -#ifndef MINIDOX_H -#define MINIDOX_H +#pragma once #ifdef KEYBOARD_minidox_rev1 #include "rev1.h" #endif #include "quantum.h" - -#endif
\ No newline at end of file diff --git a/keyboards/minidox/readme.md b/keyboards/minidox/readme.md index 74afedc18..ec52e1f75 100644 --- a/keyboards/minidox/readme.md +++ b/keyboards/minidox/readme.md @@ -1,75 +1,27 @@ -MiniDox -===== +# MiniDox  A compact version of the ErgoDox -Keyboard Maintainer: That-Canadian -Hardware Supported: MiniDox PCB rev1 Pro Micro +* Keyboard Maintainer: That-Canadian +* Hardware Supported: MiniDox PCB rev1 Pro Micro Make example for this keyboard (after setting up your build environment): make minidox/rev1:default +Flashing example for this keyboard ([using the command line](https://docs.qmk.fm/#/newbs_flashing?id=flash-your-keyboard-from-the-command-line)): + + make minidox/rev1:default:flash + See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. ## Build Guide A build guide for putting together the MiniDox v1 can be found here: [MiniDox Build Log / Guide](http://imgur.com/a/vImo6) -Flashing -------- -Note: Most of this is copied from the Let's Split readme, because it is awesome - -From the root directory run `make PROJECT:KEYMAP:avrdude` for automatic serial port resolution and flashing. -Example: `make minidox/rev1:default:avrdude` - -Choosing which board to plug the USB cable into (choosing Master) --------- -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. - -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-lefthand.eep" -// or the equivalent in dfu-programmer - -``` -and similarly for right half -``` -avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:"./quantum/split_common/eeprom-righthand.eep" -// or the equivalent in dfu-programmer -``` - -NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`) -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. +## Choosing which board to plug the USB cable into (choosing Master) -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. +Because the two boards are identical, the firmware has logic to differentiate the left and right board. It uses two strategies to figure things out, [EE_HANDS](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) or [by define](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-define). See [setting-handedness](https://docs.qmk.fm/#/config_options?id=setting-handedness) for more information. diff --git a/keyboards/minidox/rev1/config.h b/keyboards/minidox/rev1/config.h index b7272bdb0..734ca562f 100644 --- a/keyboards/minidox/rev1/config.h +++ b/keyboards/minidox/rev1/config.h @@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#ifndef REV1_CONFIG_H -#define REV1_CONFIG_H - -#include "../config.h" +#pragma once #define DEVICE_VER 0x0001 @@ -26,11 +23,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define MATRIX_ROW_PINS { B2, B6, B4, B5 } #define MATRIX_COL_PINS { F4, D3, D2, D1, D4 } +#define SOFT_SERIAL_PIN D0 + #define USE_SERIAL //#define EE_HANDS - -#define I2C_MASTER_LEFT -//#define I2C_MASTER_RIGHT - -#endif diff --git a/keyboards/minidox/rev1/rev1.h b/keyboards/minidox/rev1/rev1.h index 5d32b05d4..bfa0e5fcc 100644 --- a/keyboards/minidox/rev1/rev1.h +++ b/keyboards/minidox/rev1/rev1.h @@ -1,7 +1,4 @@ -#ifndef REV1_H -#define REV1_H - -#include "../minidox.h" +#pragma once #include "quantum.h" @@ -24,5 +21,3 @@ { k61, k62, k63, k64, k65 }, \ { ___, ___, k73, k74, k75 } \ } - -#endif diff --git a/keyboards/minidox/rules.mk b/keyboards/minidox/rules.mk index dd2affb3f..1446c5144 100644 --- a/keyboards/minidox/rules.mk +++ b/keyboards/minidox/rules.mk @@ -12,29 +12,25 @@ MCU = atmega32u4 BOOTLOADER = caterina # Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically +# change yes to no to disable # -BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) -EXTRAKEY_ENABLE ?= no # Audio control and System control(+450) -CONSOLE_ENABLE ?= no # Console for debug(+400) -COMMAND_ENABLE ?= yes # Commands for debug and configuration -NKRO_ENABLE ?= no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality -MIDI_ENABLE ?= no # MIDI controls -AUDIO_ENABLE ?= no # Audio output on port C6 -UNICODE_ENABLE ?= no # Unicode -BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. -USE_I2C ?= no +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs -CUSTOM_MATRIX = yes -SRC += matrix.c \ - i2c.c \ - split_util.c \ - serial.c +SPLIT_KEYBOARD = yes DEFAULT_FOLDER = minidox/rev1 diff --git a/keyboards/minidox/serial.c b/keyboards/minidox/serial.c deleted file mode 100644 index 74bcbb6bf..000000000 --- a/keyboards/minidox/serial.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * WARNING: be careful changing this code, it is very timing dependent - */ - -#ifndef F_CPU -#define F_CPU 16000000 -#endif - -#include <avr/io.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <stdbool.h> -#include "serial.h" - -#ifndef USE_I2C - -// Serial pulse period in microseconds. Its probably a bad idea to lower this -// value. -#define SERIAL_DELAY 24 - -uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; -uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; - -#define SLAVE_DATA_CORRUPT (1<<0) -volatile uint8_t status = 0; - -inline static -void serial_delay(void) { - _delay_us(SERIAL_DELAY); -} - -inline static -void serial_output(void) { - SERIAL_PIN_DDR |= SERIAL_PIN_MASK; -} - -// make the serial pin an input with pull-up resistor -inline static -void serial_input(void) { - SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -inline static -uint8_t serial_read_pin(void) { - return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); -} - -inline static -void serial_low(void) { - SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; -} - -inline static -void serial_high(void) { - SERIAL_PIN_PORT |= SERIAL_PIN_MASK; -} - -void serial_master_init(void) { - serial_output(); - serial_high(); -} - -void serial_slave_init(void) { - serial_input(); - - // Enable INT0 - EIMSK |= _BV(INT0); - // Trigger on falling edge of INT0 - EICRA &= ~(_BV(ISC00) | _BV(ISC01)); -} - -// Used by the master to synchronize timing with the slave. -static -void sync_recv(void) { - serial_input(); - // This shouldn't hang if the slave disconnects because the - // serial line will float to high if the slave does disconnect. - while (!serial_read_pin()); - serial_delay(); -} - -// Used by the slave to send a synchronization signal to the master. -static -void sync_send(void) { - serial_output(); - - serial_low(); - serial_delay(); - - serial_high(); -} - -// Reads a byte from the serial line -static -uint8_t serial_read_byte(void) { - uint8_t byte = 0; - serial_input(); - for ( uint8_t i = 0; i < 8; ++i) { - byte = (byte << 1) | serial_read_pin(); - serial_delay(); - _delay_us(1); - } - - return byte; -} - -// Sends a byte with MSB ordering -static -void serial_write_byte(uint8_t data) { - uint8_t b = 8; - serial_output(); - while( b-- ) { - if(data & (1 << b)) { - serial_high(); - } else { - serial_low(); - } - serial_delay(); - } -} - -// interrupt handle to be used by the slave device -ISR(SERIAL_PIN_INTERRUPT) { - sync_send(); - - uint8_t checksum = 0; - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_slave_buffer[i]); - sync_send(); - checksum += serial_slave_buffer[i]; - } - serial_write_byte(checksum); - sync_send(); - - // wait for the sync to finish sending - serial_delay(); - - // read the middle of pulses - _delay_us(SERIAL_DELAY/2); - - uint8_t checksum_computed = 0; - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_master_buffer[i] = serial_read_byte(); - sync_send(); - checksum_computed += serial_master_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_send(); - - serial_input(); // end transaction - - if ( checksum_computed != checksum_received ) { - status |= SLAVE_DATA_CORRUPT; - } else { - status &= ~SLAVE_DATA_CORRUPT; - } -} - -inline -bool serial_slave_DATA_CORRUPT(void) { - return status & SLAVE_DATA_CORRUPT; -} - -// Copies the serial_slave_buffer to the master and sends the -// serial_master_buffer to the slave. -// -// Returns: -// 0 => no error -// 1 => slave did not respond -int serial_update_buffers(void) { - // this code is very time dependent, so we need to disable interrupts - cli(); - - // signal to the slave that we want to start a transaction - serial_output(); - serial_low(); - _delay_us(1); - - // wait for the slaves response - serial_input(); - serial_high(); - _delay_us(SERIAL_DELAY); - - // check if the slave is present - if (serial_read_pin()) { - // slave failed to pull the line low, assume not present - sei(); - return 1; - } - - // if the slave is present syncronize with it - sync_recv(); - - uint8_t checksum_computed = 0; - // receive data from the slave - for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { - serial_slave_buffer[i] = serial_read_byte(); - sync_recv(); - checksum_computed += serial_slave_buffer[i]; - } - uint8_t checksum_received = serial_read_byte(); - sync_recv(); - - if (checksum_computed != checksum_received) { - sei(); - return 1; - } - - uint8_t checksum = 0; - // send data to the slave - for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { - serial_write_byte(serial_master_buffer[i]); - sync_recv(); - checksum += serial_master_buffer[i]; - } - serial_write_byte(checksum); - sync_recv(); - - // always, release the line when not in use - serial_output(); - serial_high(); - - sei(); - return 0; -} - -#endif diff --git a/keyboards/minidox/serial.h b/keyboards/minidox/serial.h deleted file mode 100644 index 15fe4db7b..000000000 --- a/keyboards/minidox/serial.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef MY_SERIAL_H -#define MY_SERIAL_H - -#include "config.h" -#include <stdbool.h> - -/* TODO: some defines for interrupt setup */ -#define SERIAL_PIN_DDR DDRD -#define SERIAL_PIN_PORT PORTD -#define SERIAL_PIN_INPUT PIND -#define SERIAL_PIN_MASK _BV(PD0) -#define SERIAL_PIN_INTERRUPT INT0_vect - -#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 -#define SERIAL_MASTER_BUFFER_LENGTH 1 - -// Buffers for master - slave communication -extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; -extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; - -void serial_master_init(void); -void serial_slave_init(void); -int serial_update_buffers(void); -bool serial_slave_data_corrupt(void); - -#endif diff --git a/keyboards/minidox/split_util.c b/keyboards/minidox/split_util.c deleted file mode 100644 index 39639c3b4..000000000 --- a/keyboards/minidox/split_util.c +++ /dev/null @@ -1,84 +0,0 @@ -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <util/delay.h> -#include <avr/eeprom.h> -#include "split_util.h" -#include "matrix.h" -#include "keyboard.h" -#include "config.h" - -#ifdef USE_I2C -# include "i2c.h" -#else -# include "serial.h" -#endif - -volatile bool isLeftHand = true; - -static void setup_handedness(void) { - #ifdef EE_HANDS - isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); - #else - // I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c - #if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT) - isLeftHand = !has_usb(); - #else - isLeftHand = has_usb(); - #endif - #endif -} - -static void keyboard_master_setup(void) { -#ifdef USE_I2C - i2c_master_init(); -#ifdef SSD1306OLED - matrix_master_OLED_init (); -#endif -#else - serial_master_init(); -#endif -} - -static void keyboard_slave_setup(void) { -#ifdef USE_I2C - i2c_slave_init(SLAVE_I2C_ADDRESS); -#else - serial_slave_init(); -#endif -} - -bool has_usb(void) { - USBCON |= (1 << OTGPADE); //enables VBUS pad - _delay_us(5); - return (USBSTA & (1<<VBUS)); //checks state of VBUS -} - -void split_keyboard_setup(void) { - setup_handedness(); - - if (has_usb()) { - keyboard_master_setup(); - } else { - keyboard_slave_setup(); - } - sei(); -} - -void keyboard_slave_loop(void) { - matrix_init(); - - while (1) { - matrix_slave_scan(); - } -} - -// this code runs before the usb and keyboard is initialized -void matrix_setup(void) { - split_keyboard_setup(); - - if (!has_usb()) { - keyboard_slave_loop(); - } -} diff --git a/keyboards/minidox/split_util.h b/keyboards/minidox/split_util.h deleted file mode 100644 index 595a0659e..000000000 --- a/keyboards/minidox/split_util.h +++ /dev/null @@ -1,20 +0,0 @@ -#ifndef SPLIT_KEYBOARD_UTIL_H -#define SPLIT_KEYBOARD_UTIL_H - -#include <stdbool.h> -#include "eeconfig.h" - -#define SLAVE_I2C_ADDRESS 0x32 - -extern volatile bool isLeftHand; - -// slave version of matix scan, defined in matrix.c -void matrix_slave_scan(void); - -void split_keyboard_setup(void); -bool has_usb(void); -void keyboard_slave_loop(void); - -void matrix_master_OLED_init (void); - -#endif |