diff options
| -rw-r--r-- | keyboards/chimera_ortho/chimera_ortho.c | 31 | ||||
| -rw-r--r-- | keyboards/chimera_ortho/chimera_ortho.h | 66 | ||||
| -rw-r--r-- | keyboards/chimera_ortho/config.h | 87 | ||||
| -rw-r--r-- | keyboards/chimera_ortho/keymaps/default/keymap.c | 193 | ||||
| -rw-r--r-- | keyboards/chimera_ortho/matrix.c | 164 | ||||
| -rw-r--r-- | keyboards/chimera_ortho/rules.mk | 78 |
6 files changed, 619 insertions, 0 deletions
diff --git a/keyboards/chimera_ortho/chimera_ortho.c b/keyboards/chimera_ortho/chimera_ortho.c new file mode 100644 index 000000000..2a602cf2f --- /dev/null +++ b/keyboards/chimera_ortho/chimera_ortho.c @@ -0,0 +1,31 @@ +#include "chimera_ortho.h" + +void uart_init(void) { + SERIAL_UART_INIT(); +} + +void led_init(void) { + DDRD |= (1<<1); + PORTD |= (1<<1); + DDRF |= (1<<4) | (1<<5); + PORTF |= (1<<4) | (1<<5); +} + + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + uart_init(); + led_init(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +} + +void led_set_kb(uint8_t usb_led) { + +} diff --git a/keyboards/chimera_ortho/chimera_ortho.h b/keyboards/chimera_ortho/chimera_ortho.h new file mode 100644 index 000000000..c21b37ff8 --- /dev/null +++ b/keyboards/chimera_ortho/chimera_ortho.h @@ -0,0 +1,66 @@ +#ifndef CHIMERA_ORTHO_H +#define CHIMERA_ORTHO_H + +#include "quantum.h" +#include "matrix.h" +#include "backlight.h" +#include <stddef.h> + +#define red_led_off PORTF |= (1<<5) +#define red_led_on PORTF &= ~(1<<5) +#define blu_led_off PORTF |= (1<<4) +#define blu_led_on PORTF &= ~(1<<4) +#define grn_led_off PORTD |= (1<<1) +#define grn_led_on PORTD &= ~(1<<1) + +#define set_led_off red_led_off; grn_led_off; blu_led_off +#define set_led_red red_led_on; grn_led_off; blu_led_off +#define set_led_blue red_led_off; grn_led_off; blu_led_on +#define set_led_green red_led_off; grn_led_on; blu_led_off +#define set_led_yellow red_led_on; grn_led_on; blu_led_off +#define set_led_magenta red_led_on; grn_led_off; blu_led_on +#define set_led_cyan red_led_off; grn_led_on; blu_led_on +#define set_led_white red_led_on; grn_led_on; blu_led_on + +/* +#define LED_B 5 +#define LED_R 6 +#define LED_G 7 + +#define all_leds_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) + +#define red_led_on PORTF |= (1<<LED_R) +#define red_led_off PORTF &= ~(1<<LED_R) +#define grn_led_on PORTF |= (1<<LED_G) +#define grn_led_off PORTF &= ~(1<<LED_G) +#define blu_led_on PORTF |= (1<<LED_B) +#define blu_led_off PORTF &= ~(1<<LED_B) + +#define set_led_off PORTF &= ~(1<<LED_B) & ~(1<<LED_R) & ~(1<<LED_G) +#define set_led_red PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_G) | (1<<LED_R) +#define set_led_blue PORTF = PORTF & ~(1<<LED_G) & ~(1<<LED_R) | (1<<LED_B) +#define set_led_green PORTF = PORTF & ~(1<<LED_B) & ~(1<<LED_R) | (1<<LED_G) +#define set_led_yellow PORTF = PORTF & ~(1<<LED_B) | (1<<LED_R) | (1<<LED_G) +#define set_led_magenta PORTF = PORTF & ~(1<<LED_G) | (1<<LED_R) | (1<<LED_B) +#define set_led_cyan PORTF = PORTF & ~(1<<LED_R) | (1<<LED_B) | (1<<LED_G) +#define set_led_white PORTF |= (1<<LED_B) | (1<<LED_R) | (1<<LED_G) +*/ + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, \ + k14, k15, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, \ + k28, k29, k31, k32, k33, k34, k35, k36, k37, k38, k41, k42, k43, k44,\ + k45, k46, k47, k48 \ +) \ +{ \ + { KC_##k01, KC_##k02, KC_##k03, KC_##k04, KC_##k05, KC_##k08, KC_##k09, KC_##k10, KC_##k11, KC_##k12 }, \ + { KC_##k15, KC_##k16, KC_##k17, KC_##k18, KC_##k19, KC_##k22, KC_##k23, KC_##k24, KC_##k25, KC_##k26 }, \ + { KC_##k29, KC_##k31, KC_##k32, KC_##k33, KC_##k34, KC_##k37, KC_##k38, KC_##k41, KC_##k42, KC_##k43 }, \ + { KC_NO, KC_##k06, KC_##k20, KC_##k35, KC_##k46, KC_##k47, KC_##k36, KC_##k21, KC_##k07, KC_NO }, \ + { KC_NO, KC_##k28, KC_##k14, KC_##k00, KC_##k45, KC_##k48, KC_##k13, KC_##k27, KC_##k44, KC_NO }, \ +} + +#endif diff --git a/keyboards/chimera_ortho/config.h b/keyboards/chimera_ortho/config.h new file mode 100644 index 000000000..44c6212b1 --- /dev/null +++ b/keyboards/chimera_ortho/config.h @@ -0,0 +1,87 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER unknown +#define PRODUCT Chimera Ortho +#define DESCRIPTION q.m.k. keyboard firmware for Chimera Ortho + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 10 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +//#define BACKLIGHT_LEVELS 3 + +#define ONESHOT_TIMEOUT 500 + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +#define PREVENT_STUCK_MODIFIERS + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +//UART settings for communication with the RF microcontroller +#define SERIAL_UART_BAUD 1000000 +#define SERIAL_UART_DATA UDR1 +#define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +#define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +#define SERIAL_UART_RXD_PRESENT (UCSR1A & _BV(RXC1)) +#define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX and RX */ \ + UCSR1B = _BV(TXEN1) | _BV(RXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + } while(0) + +#endif diff --git a/keyboards/chimera_ortho/keymaps/default/keymap.c b/keyboards/chimera_ortho/keymaps/default/keymap.c new file mode 100644 index 000000000..ef477e652 --- /dev/null +++ b/keyboards/chimera_ortho/keymaps/default/keymap.c @@ -0,0 +1,193 @@ +// this is the style you want to emulate. +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, + +#include "chimera_ortho.h" + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum chimera_ortho_layers +{ + _QWERTY, + _CAPS, + _NUMPAD, + _SYMBOLS, + _MACROS, + _NAV +}; + +#define KC_NMPD TG(_NUMPAD) +#define KC_SYMB TG(_SYMBOLS) +#define KC_SPFN LT(_NAV,KC_EQL) +#define KC_SCTL MT(MOD_LCTL, KC_LBRC) +#define KC_SCTR MT(MOD_LCTL, KC_RBRC) +#define KC_SPLT MT(MOD_LALT, KC_MINS) +#define KC_SPRT MT(MOD_LALT, KC_1) +#define KC_GBRC MT(MOD_RGUI, KC_8) +#define KC_GQOT MT(MOD_LGUI, KC_QUOT) +#define KC_MESC LT(_MACROS, KC_ESC) +#define KC_INCL M(0) +#define KC_PULL M(1) +#define KC_PUSH M(2) +#define KC_SCAP M(3) +#define KC_SCOF M(4) +#define KC_CAD LALT(LCTL(KC_DEL)) + +#define LONGPRESS_DELAY 150 +//#define LAYER_TOGGLE_DELAY 300 + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO +#define KC_ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = KEYMAP( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + MESC, Q , W , E , R , T ,SCTL, SCTR, Y , U , I , O , P ,QUOT, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + TAB , A , S , D , F , G ,SPLT, SPRT, H , J , K , L ,SCLN,ENT , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + LSPO, Z , X , C , V , B ,SPFN, GBRC, N , M ,COMM,DOT ,SLSH,RSPC, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + NMPD,BSPC, SPC ,SYMB + // \------------------+----+----+---/ \---+----+----+-------------------/ + ), + + [_CAPS] = KEYMAP( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + , , , , , , , , , , , , , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , ,UNDS, , , , , ,COLN, , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + SCOF, , , , , , , , , , , , ,SCOF, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , + // \------------------+----+----+---/ \---+----+----+-------------------/ + ), + + [_NUMPAD] = KEYMAP( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + , ,COLN , , , , , , , 7 , 8 , 9 ,ASTR,MINS, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , ,DOT , , , , , , , 4 , 5 , 6 ,PLUS, , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , , , , , 1 , 2 , 3 ,SLSH, , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , 0 + // \------------------+----+----+---/ \---+----+----+-------------------/ + ), + + [_SYMBOLS] = KEYMAP( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + ,EXLM, AT ,HASH,DLR ,PERC, , ,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , F1 , F2 , F3 , F4 , F5 , , ,TILD,COLN,UNDS,LCBR,RCBR, , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , F6 , F7 , F8 , F9 ,F10 , , ,GRV ,SCLN,MINS,LBRC,RBRC, , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + PIPE, , , + // \------------------+----+----+---/ \---+----+----+-------------------/ + ), + + [_NAV] = KEYMAP( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + , , , , , , , , , , UP , ,PSCR, , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , , , , ,LEFT,DOWN,RGHT, , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , , , , , , ,PGUP,PGDN, , , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + ,DEL , , + // \------------------+----+----+---/ \---+----+----+-------------------/ + ), + + [_MACROS] = KEYMAP( + //,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----. + , , , , , , , , , ,INCL, , , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , ,CAD , , , , , , , , , , , + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + SCAP, , , , , , , , , ,PULL,PUSH, ,SCAP, + //|----+----+----+----+----+----+----| |----+----+----+----+----+----+----| + , , , + // \------------------+----+----+---/ \---+----+----+-------------------/ + ) + +}; + + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + /* include some kind of library or header */ + case 0: + if (record->event.pressed) { + SEND_STRING("#include <>"); + return MACRO( T(LEFT), END); + } + break; + case 1: + if (record->event.pressed) { + SEND_STRING("git pull"); + return MACRO( T(ENT), END ); + } + break; + case 2: + if (record->event.pressed){ + SEND_STRING("git push"); + return MACRO( T(ENT), END ); + } + break; + case 3: + if (record->event.pressed){ + layer_on(_CAPS); + register_code(KC_CAPSLOCK); + unregister_code(KC_CAPSLOCK); + } + break; + case 4: + if (record->event.pressed){ + layer_off(_CAPS); + register_code(KC_CAPSLOCK); + unregister_code(KC_CAPSLOCK); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_scan_user(void) { + uint8_t layer = biton32(layer_state); + + switch (layer) { + case _QWERTY: + set_led_green; + break; + case _CAPS: + set_led_white; + break; + case _NUMPAD: + set_led_blue; + break; + case _SYMBOLS: + set_led_red; + break; + case _NAV: + set_led_magenta; + break; + case _MACROS: + set_led_cyan; + break; + default: + set_led_green; + break; + } +}; diff --git a/keyboards/chimera_ortho/matrix.c b/keyboards/chimera_ortho/matrix.c new file mode 100644 index 000000000..0d046339e --- /dev/null +++ b/keyboards/chimera_ortho/matrix.c @@ -0,0 +1,164 @@ +/* +Copyright 2012 Jun Wako +Copyright 2014 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include <stdint.h> +#include <stdbool.h> +#if defined(__AVR__) +#include <avr/io.h> +#endif +#include "wait.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "timer.h" + +#if (MATRIX_COLS <= 8) +# define print_matrix_header() print("\nr/c 01234567\n") +# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop(matrix[i]) +# define ROW_SHIFTER ((uint8_t)1) +#elif (MATRIX_COLS <= 16) +# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") +# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop16(matrix[i]) +# define ROW_SHIFTER ((uint16_t)1) +#elif (MATRIX_COLS <= 32) +# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") +# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop32(matrix[i]) +# define ROW_SHIFTER ((uint32_t)1) +#endif + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) { + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) { + return MATRIX_COLS; +} + +void matrix_init(void) { + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) +{ + SERIAL_UART_INIT(); + + uint32_t timeout = 0; + + //the s character requests the RF slave to send the matrix + SERIAL_UART_DATA = 's'; + + //trust the external keystates entirely, erase the last data + uint8_t uart_data[11] = {0}; + + //there are 10 bytes corresponding to 10 columns, and an end byte + for (uint8_t i = 0; i < 11; i++) { + //wait for the serial data, timeout if it's been too long + //this only happened in testing with a loose wire, but does no + //harm to leave it in here + while(!SERIAL_UART_RXD_PRESENT){ + timeout++; + if (timeout > 10000){ + break; + } + } + uart_data[i] = SERIAL_UART_DATA; + } + + //check for the end packet, the key state bytes use the LSBs, so 0xE0 + //will only show up here if the correct bytes were recieved + if (uart_data[10] == 0xE0) + { + //shifting and transferring the keystates to the QMK matrix variable + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = (uint16_t) uart_data[i*2] | (uint16_t) uart_data[i*2+1] << 5; + } + } + + + matrix_scan_quantum(); + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<col)); +} + +inline +matrix_row_t matrix_get_row(uint8_t row) +{ + return matrix[row]; +} + +void matrix_print(void) +{ + print_matrix_header(); + + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); print(": "); + print_matrix_row(row); + print("\n"); + } +} + +uint8_t matrix_key_count(void) +{ + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += matrix_bitpop(i); + } + return count; +} diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk new file mode 100644 index 000000000..098bf28fa --- /dev/null +++ b/keyboards/chimera_ortho/rules.mk @@ -0,0 +1,78 @@ + +OPT_DEFS += -DCHIMERA_ORTHO_PROMICRO +OPT_DEFS += -DCATERINA_BOOTLOADER +CHIMERA_ORTHO_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ + avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) + +# # project specific files +SRC = matrix.c + + +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +# MIDI_ENABLE = YES # MIDI controls +UNICODE_ENABLE = YES # Unicode +# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID + +USB = /dev/ttyACM0 |