diff options
| -rw-r--r-- | keyboards/alps64/readme.md | 4 | ||||
| -rw-r--r-- | keyboards/clueboard/readme.md | 4 | ||||
| -rw-r--r-- | keyboards/cluepad/readme.md | 4 | ||||
| -rw-r--r-- | keyboards/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/jd45/readme.md | 4 | ||||
| -rw-r--r-- | keyboards/phantom/readme.md | 4 | ||||
| -rw-r--r-- | keyboards/satan/Makefile | 2 | ||||
| -rw-r--r-- | keyboards/satan/keymaps/sethbc/Makefile | 21 | ||||
| -rw-r--r-- | keyboards/satan/readme.md | 4 | ||||
| -rw-r--r-- | readme.md | 12 |
10 files changed, 53 insertions, 8 deletions
diff --git a/keyboards/alps64/readme.md b/keyboards/alps64/readme.md new file mode 100644 index 000000000..1798b193a --- /dev/null +++ b/keyboards/alps64/readme.md @@ -0,0 +1,4 @@ +Alps64 keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/clueboard/readme.md b/keyboards/clueboard/readme.md new file mode 100644 index 000000000..aa301f020 --- /dev/null +++ b/keyboards/clueboard/readme.md @@ -0,0 +1,4 @@ +Clueboard keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/cluepad/readme.md b/keyboards/cluepad/readme.md new file mode 100644 index 000000000..8450340f2 --- /dev/null +++ b/keyboards/cluepad/readme.md @@ -0,0 +1,4 @@ +Cluepad number pad firmware +====================== + +TODO: to be updated. diff --git a/keyboards/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md b/keyboards/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md index 4188d2b50..16cebd091 100644 --- a/keyboards/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md +++ b/keyboards/ergodox_ez/keymaps/romanzolotarev-norman-plover-osx-hjkl/readme.md @@ -10,7 +10,7 @@ There are four layers: Looking for IJKL arrows? [Here we go](../romanzolotarev-norman-plover-osx/). -[](rttp://www.keyboard-layout-editor.com/#/gists/56ffedceb0668dda47c993e7271563e0) +[](http://www.keyboard-layout-editor.com/#/gists/56ffedceb0668dda47c993e7271563e0) ## Switching diff --git a/keyboards/jd45/readme.md b/keyboards/jd45/readme.md new file mode 100644 index 000000000..2822666e8 --- /dev/null +++ b/keyboards/jd45/readme.md @@ -0,0 +1,4 @@ +JD45 keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/phantom/readme.md b/keyboards/phantom/readme.md new file mode 100644 index 000000000..190f738fa --- /dev/null +++ b/keyboards/phantom/readme.md @@ -0,0 +1,4 @@ +Phantom keyboard firmware +====================== + +TODO: to be updated. diff --git a/keyboards/satan/Makefile b/keyboards/satan/Makefile index 184b5ac37..a0879fc9c 100644 --- a/keyboards/satan/Makefile +++ b/keyboards/satan/Makefile @@ -52,7 +52,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= yes # Console for debug(+400) diff --git a/keyboards/satan/keymaps/sethbc/Makefile b/keyboards/satan/keymaps/sethbc/Makefile new file mode 100644 index 000000000..2a7ff2779 --- /dev/null +++ b/keyboards/satan/keymaps/sethbc/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/satan/readme.md b/keyboards/satan/readme.md new file mode 100644 index 000000000..aa301f020 --- /dev/null +++ b/keyboards/satan/readme.md @@ -0,0 +1,4 @@ +Clueboard keyboard firmware +====================== + +TODO: to be updated. @@ -35,7 +35,7 @@ This is not a tiny project. While this is the main readme, there are many other * The list of possible keycodes you can use in your keymap is actually spread out in a few different places: * [doc/keycode.txt](doc/keycode.txt) - an explanation of those same keycodes. * [quantum/keymap.h](quantum/keymap.h) - this is where the QMK-specific aliases are all set up. Things like the Hyper and Meh key, the Leader key, and all of the other QMK innovations. These are also explained and documented below, but `keymap.h` is where they're actually defined. -* The [TMK documentation](doc/TMK_readme.md). QMK is based on TMK, and this explains how it works internally. +* The [TMK documentation](doc/TMK_README.md). QMK is based on TMK, and this explains how it works internally. # Getting started @@ -91,7 +91,7 @@ docker run -e keymap=gwen -e keyboard=ergodox_ez --rm -v $('pwd'):/qmk:rw edasqu This will compile the targetted keyboard/keymap and leave it in your QMK directory for you to flash. ### Vagrant -If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](VAGRANT_GUIDE.md). +If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](doc/VAGRANT_GUIDE.md). ## Verify Your Installation 1. If you haven't already, obtain this repository ([https://github.com/jackhumbert/qmk_firmware](https://github.com/jackhumbert/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application. @@ -112,7 +112,7 @@ In every keymap folder, the following files are recommended: The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). You can run `make` from the root (`/`), your keyboard folder (`/keyboards/<keyboard>/`), or your keymap folder (`/keyboards/<keyboard>/keymaps/<keymap>/`) if you have a `Makefile` there (see the example [here](/doc/keymap_makefile_example.mk)). -By default, this will generate a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests. Your .hex file will also be available on qmk.fm/keyboards/<keyboard>/keymaps/<keymap>/. +By default, this will generate a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests. Below are some definitions that will be useful: @@ -789,7 +789,7 @@ float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); float goodbye[][2] = SONG(GOODBYE_SOUND); ``` -Wherein we bind predefined songs (from [audio/song_list.h](/audio/song_list.h)) into named variables. This is one optimization that helps save on memory: These songs only take up memory when you reference them in your keymap, because they're essentially all preprocessor directives. +Wherein we bind predefined songs (from [quantum/audio/song_list.h](/quantum/audio/song_list.h)) into named variables. This is one optimization that helps save on memory: These songs only take up memory when you reference them in your keymap, because they're essentially all preprocessor directives. So now you have something called `tone_plover` for example. How do you make it play the Plover tune, then? If you look further down the keymap, you'll see this: @@ -831,7 +831,7 @@ AutoHotkey inserts the Text right of `Send, ` when this combination is pressed. ## RGB Under Glow Mod - + Here is a quick demo on Youtube (with NPKC KC60) (https://www.youtube.com/watch?v=VKrpPAHlisY). @@ -856,7 +856,7 @@ The firmware supports 5 different light effects, and the color (hue, saturation, ### WS2812 Wiring - + Please note the USB port can only supply a limited amount of power to the keyboard (500mA by standard, however, modern computer and most usb hubs can provide 700+mA.). According to the data of NeoPixel from Adafruit, 30 WS2812 LEDs require a 5V 1A power supply, LEDs used in this mod should not more than 20. |