diff options
-rw-r--r-- | docs/spi_driver.md | 19 | ||||
-rw-r--r-- | drivers/chibios/spi_master.c | 137 | ||||
-rw-r--r-- | drivers/chibios/spi_master.h | 78 | ||||
-rw-r--r-- | quantum/stm32/halconf.h | 2 | ||||
-rw-r--r-- | quantum/stm32/mcuconf.h | 2 |
5 files changed, 235 insertions, 3 deletions
diff --git a/docs/spi_driver.md b/docs/spi_driver.md index e2b5b140b..c170bf1df 100644 --- a/docs/spi_driver.md +++ b/docs/spi_driver.md @@ -18,7 +18,24 @@ You may use more than one slave select pin, not just the `SS` pin. This is usefu ## ChibiOS/ARM Configuration -ARM support for this driver is not ready yet. Check back later! +You'll need to determine which pins can be used for SPI -- as an example, STM32 parts generally have multiple SPI peripherals, labeled SPI1, SPI2, SPI3 etc. + +To enable SPI, modify your board's `halconf.h` to enable SPI - both `HAL_USE_SPI` and `SPI_USE_WAIT` should be `TRUE`, and `SPI_SELECT_MODE` should be `SPI_SELECT_MODE_PAD`. +Then, modify your board's `mcuconf.h` to enable the SPI peripheral you've chosen -- in the case of using SPI2, modify `STM32_SPI_USE_SPI2` to be `TRUE`. + +As per the AVR configuration, you may select any other standard GPIO as a slave select pin, and can be supplied to `spi_start()`. + +Configuration-wise, you'll need to set up the peripheral as per your MCU's datasheet -- the defaults match the pins for a Proton-C, i.e. STM32F303. + +`config.h` override | Description | Default Value +----------------------------|---------------------------------------------------------------|-------------- +`#define SPI_DRIVER` | SPI peripheral to use - SPI1 => `SPID1`, SPI2 => `SPID2` etc. | `SPID2` +`#define SPI_SCK_PIN` | The pin to use for the SCK | `B13` +`#define SPI_SCK_PAL_MODE` | The alternate function mode for the SCK pin | `5` +`#define SPI_MOSI_PIN` | The pin to use for the MOSI | `B15` +`#define SPI_MOSI_PAL_MODE` | The alternate function mode for the MOSI pin | `5` +`#define SPI_MISO_PIN` | The pin to use for the MISO | `B14` +`#define SPI_MISO_PAL_MODE` | The alternate function mode for the MISO pin | `5` ## Functions diff --git a/drivers/chibios/spi_master.c b/drivers/chibios/spi_master.c new file mode 100644 index 000000000..552ac663c --- /dev/null +++ b/drivers/chibios/spi_master.c @@ -0,0 +1,137 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ + +#include "spi_master.h" +#include "quantum.h" +#include "timer.h" + +static pin_t currentSlavePin = NO_PIN; +static SPIConfig spiConfig = {false, NULL, 0, 0, 0, 0}; + +__attribute__((weak)) void spi_init(void) { + // Try releasing special pins for a short time + palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_INPUT); + palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_INPUT); + palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_INPUT); + + chThdSleepMilliseconds(10); +#if defined(USE_GPIOV1) + palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL); + palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL); + palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_STM32_ALTERNATE_PUSHPULL); +#else + palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); + palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); + palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_STM32_OTYPE_PUSHPULL | PAL_STM32_OSPEED_HIGHEST); +#endif +} + +bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) { + if (currentSlavePin != NO_PIN || slavePin == NO_PIN) { + return false; + } + + uint16_t roundedDivisor = 2; + while (roundedDivisor < divisor) { + roundedDivisor <<= 1; + } + + if (roundedDivisor < 2 || roundedDivisor > 256) { + return false; + } + + spiConfig.cr1 = 0; + + if (lsbFirst) { + spiConfig.cr1 |= SPI_CR1_LSBFIRST; + } + + switch (mode) { + case 0: + break; + case 1: + spiConfig.cr1 |= SPI_CR1_CPHA; + break; + case 2: + spiConfig.cr1 |= SPI_CR1_CPOL; + break; + case 3: + spiConfig.cr1 |= SPI_CR1_CPHA | SPI_CR1_CPOL; + break; + } + + switch (roundedDivisor) { + case 2: + break; + case 4: + spiConfig.cr1 |= SPI_CR1_BR_0; + break; + case 8: + spiConfig.cr1 |= SPI_CR1_BR_1; + break; + case 16: + spiConfig.cr1 |= SPI_CR1_BR_1 | SPI_CR1_BR_0; + break; + case 32: + spiConfig.cr1 |= SPI_CR1_BR_2; + break; + case 64: + spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_0; + break; + case 128: + spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_1; + break; + case 256: + spiConfig.cr1 |= SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0; + break; + } + + currentSlavePin = slavePin; + spiConfig.ssport = PAL_PORT(slavePin); + spiConfig.sspad = PAL_PAD(slavePin); + + setPinOutput(slavePin); + spiStart(&SPI_DRIVER, &spiConfig); + spiSelect(&SPI_DRIVER); + + return true; +} + +spi_status_t spi_write(uint8_t data) { return spi_transmit(&data, 1); } + +spi_status_t spi_read(void) { + uint8_t data = 0; + spi_receive(&data, 1); + return data; +} + +spi_status_t spi_transmit(const uint8_t *data, uint16_t length) { + spiSend(&SPI_DRIVER, length, data); + return SPI_STATUS_SUCCESS; +} + +spi_status_t spi_receive(uint8_t *data, uint16_t length) { + spiReceive(&SPI_DRIVER, length, data); + return SPI_STATUS_SUCCESS; +} + +void spi_stop(void) { + if (currentSlavePin != NO_PIN) { + spiUnselect(&SPI_DRIVER); + spiStop(&SPI_DRIVER); + currentSlavePin = NO_PIN; + } +} diff --git a/drivers/chibios/spi_master.h b/drivers/chibios/spi_master.h new file mode 100644 index 000000000..0c18587c9 --- /dev/null +++ b/drivers/chibios/spi_master.h @@ -0,0 +1,78 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <ch.h> +#include <hal.h> +#include <quantum.h> + +#ifndef SPI_DRIVER +# define SPI_DRIVER SPID2 +#endif + +#ifndef SPI_SCK_PIN +# define SPI_SCK_PIN B13 +#endif + +#ifndef SPI_SCK_PAL_MODE +# define SPI_SCK_PAL_MODE 5 +#endif + +#ifndef SPI_MOSI_PIN +# define SPI_MOSI_PIN B15 +#endif + +#ifndef SPI_MOSI_PAL_MODE +# define SPI_MOSI_PAL_MODE 5 +#endif + +#ifndef SPI_MISO_PIN +# define SPI_MISO_PIN B14 +#endif + +#ifndef SPI_MISO_PAL_MODE +# define SPI_MISO_PAL_MODE 5 +#endif + +typedef int16_t spi_status_t; + +#define SPI_STATUS_SUCCESS (0) +#define SPI_STATUS_ERROR (-1) +#define SPI_STATUS_TIMEOUT (-2) + +#define SPI_TIMEOUT_IMMEDIATE (0) +#define SPI_TIMEOUT_INFINITE (0xFFFF) + +#ifdef __cplusplus +extern "C" { +#endif +void spi_init(void); + +bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor); + +spi_status_t spi_write(uint8_t data); + +spi_status_t spi_read(void); + +spi_status_t spi_transmit(const uint8_t *data, uint16_t length); + +spi_status_t spi_receive(uint8_t *data, uint16_t length); + +void spi_stop(void); +#ifdef __cplusplus +} +#endif diff --git a/quantum/stm32/halconf.h b/quantum/stm32/halconf.h index 106f0f575..533803a25 100644 --- a/quantum/stm32/halconf.h +++ b/quantum/stm32/halconf.h @@ -156,7 +156,7 @@ * @brief Enables the SPI subsystem. */ # if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -# define HAL_USE_SPI FALSE +# define HAL_USE_SPI TRUE # endif /** diff --git a/quantum/stm32/mcuconf.h b/quantum/stm32/mcuconf.h index ca4ad7b51..71994a98e 100644 --- a/quantum/stm32/mcuconf.h +++ b/quantum/stm32/mcuconf.h @@ -227,7 +227,7 @@ * SPI driver system settings. */ #define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI2 TRUE #define STM32_SPI_USE_SPI3 FALSE #define STM32_SPI_SPI1_DMA_PRIORITY 1 #define STM32_SPI_SPI2_DMA_PRIORITY 1 |