diff options
-rw-r--r-- | keyboards/infinity60/led_controller.c | 322 | ||||
-rw-r--r-- | keyboards/infinity60/led_controller.h | 2 |
2 files changed, 160 insertions, 164 deletions
diff --git a/keyboards/infinity60/led_controller.c b/keyboards/infinity60/led_controller.c index e98d8de50..cb91f9f35 100644 --- a/keyboards/infinity60/led_controller.c +++ b/keyboards/infinity60/led_controller.c @@ -170,12 +170,12 @@ static THD_FUNCTION(LEDthread, arg) { (void)arg; chRegSetThreadName("LEDthread"); - uint8_t i, page; - uint8_t control_register_word[2] = {0}; + uint8_t i, j, page; + uint8_t control_register_word[2] = {0};//register address - byte to write uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes //persistent status variables - uint8_t backlight_status, led_step_status, layer_status; + uint8_t backlight_status, pwm_step_status, layer_status; //mailbox variables uint8_t temp, msg_type, msg_led; @@ -187,9 +187,9 @@ static THD_FUNCTION(LEDthread, arg) { */ // initialize persistent variables -backlight_status = 0; -led_step_status = 4; //full brightness -layer_status = 0; +backlight_status = 0; //start backlight off +pwm_step_status = 4; //full brightness +layer_status = 0; //start frame 0 (all off/on) while(true) { // wait for a message (asynchronous) @@ -202,170 +202,172 @@ layer_status = 0; xprintf("--------------------\n"); xprintf("mailbox fetch\nmsg: %X\n", msg); xprintf("type: %X - led: %X\n", msg_type, msg_led); //test if msg_type is 1 or 2 bytes after mask - switch (msg_type){ - case KEY_LIGHT: - //TODO: lighting key led on keypress - break; - - //turn on/off/toggle single led, msg_led = row/col of led - case OFF_LED: - xprintf("OFF_LED\n"); - set_led_bit(7, control_register_word, msg_led, 0); - is31_write_data (7, control_register_word, 0x02); - if (layer_status > 0) {//check current led page to prevent double blink - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7); - } - layer_status = 7; - break; - case ON_LED: - xprintf("ON_LED\n"); - set_led_bit(7, control_register_word, msg_led, 1); - is31_write_data (7, control_register_word, 0x02); - if (layer_status > 7) { - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7); - } - layer_status = 7; - break; - case TOGGLE_LED: - xprintf("TOGGLE_LED\n"); - set_led_bit(7, control_register_word, msg_led, 2); - is31_write_data (7, control_register_word, 0x02); - if (layer_status > 7) { - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7); - } - layer_status = 7; + switch (msg_type){ + case KEY_LIGHT: + //TODO: lighting key led on keypress break; + + //turn on/off/toggle single led, msg_led = row/col of led + case OFF_LED: + xprintf("OFF_LED\n"); + set_led_bit(7, control_register_word, msg_led, 0); + is31_write_data (7, control_register_word, 0x02); + if (layer_status > 0) {//check current led page to prevent double blink + is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7); + } + layer_status = 7; + break; + case ON_LED: + xprintf("ON_LED\n"); + set_led_bit(7, control_register_word, msg_led, 1); + is31_write_data (7, control_register_word, 0x02); + if (layer_status > 7) { + is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7); + } + layer_status = 7; + break; + case TOGGLE_LED: + xprintf("TOGGLE_LED\n"); + set_led_bit(7, control_register_word, msg_led, 2); - case TOGGLE_ALL: - xprintf("TOGGLE_ALL\n"); - //msg_led = unused, TODO: consider using msg_led to toggle layer display + is31_write_data (7, control_register_word, 0x02); + if (layer_status > 7) { + is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7); + } + layer_status = 7; + break; - is31_read_register(0, 0x00, &temp);//if first byte is on, then toggle frame 1 off + case TOGGLE_ALL: + xprintf("TOGGLE_ALL\n"); + //msg_led = unused - led_control_reg[0] = 0; - if (temp==0) { - xprintf("all leds on"); - __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12); - } else { - xprintf("all leds off"); - __builtin_memset(led_control_reg+1, 0, 0x12); - } + is31_read_register(0, 0x00, &temp);//if first byte is on, then toggle frame 1 off - is31_write_data(0, led_control_reg, 0x13); - if (layer_status > 0) { - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0); - } - layer_status=0; - //TODO: Double blink when all on - break; + led_control_reg[0] = 0; + if (temp==0) { + xprintf("all leds on"); + __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12); + } else { + xprintf("all leds off"); + __builtin_memset(led_control_reg+1, 0, 0x12); + } - case TOGGLE_BACKLIGHT: - //msg_led = unused - //TODO: consider Frame 0 as on/off layer and toggle led control register here - //TODO: need to test tracking of active layer with layer_state from qmk - xprintf("TOGGLE_BACKLIGHT\n"); - backlight_status ^= 1; - is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp); - layer_status = temp; - - page = backlight_status == 0 ? 0 : layer_status; - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, page); - break; + is31_write_data(0, led_control_reg, 0x13); + if (layer_status > 0) { + is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0); + } + layer_status=0; + break; - case TOGGLE_LAYER_LEDS://show layer indicator or full map of layer keys. - //TODO: change so user can flag which they want, indiv or full map in fn_actions - //msg_led = layer to toggle on - xprintf("TOGGLE_LAYER_LEDS\n"); - is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp); + case TOGGLE_BACKLIGHT: + //msg_led = unused + //TODO: need to test tracking of active layer with layer_state from qmk + xprintf("TOGGLE_BACKLIGHT\n"); + backlight_status ^= 1; + is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp); + layer_status = temp; - if(temp == msg_led) { - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7); - layer_status = 7; - } else { - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_led); - layer_status = msg_led; - } - break; - - case TOGGLE_NUM_LOCK: - //msg_led = 0 or 1, off/on - //TODO: confirm toggling works and doesn't get out of sync - set_lock_leds(USB_LED_NUM_LOCK, msg_led); - break; - - case TOGGLE_CAPS_LOCK: - //msg_led = 0 or 1, off/on - //TODO: confirm toggling works and doesn't get out of sync - set_lock_leds(USB_LED_CAPS_LOCK, msg_led); - break; + page = backlight_status == 0 ? 0 : layer_status; + is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, page); + break; - case MODE_BREATH: - break; - case STEP_BRIGHTNESS: - //TEST: Step brightness code - //pwm_levels[] bounds checking, loop through array - //TODO: find a cleaner way to walk through this logic - if (msg_led == 0 && led_step_status == 0) { - led_step_status = 4; - } else { - led_step_status--; - } + case TOGGLE_PAGE_LEDS://show single layer indicator or full map of layer + //msg_led = page to toggle on + xprintf("TOGGLE_LAYER_LEDS\n"); + is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp); + + if(temp == msg_led) { + is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7); + layer_status = 7; + } else { + is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_led); + layer_status = msg_led; + } + break; + + case TOGGLE_NUM_LOCK: + //msg_led = 0 or 1, off/on + set_lock_leds(USB_LED_NUM_LOCK, msg_led); + break; - if (msg_led == 1 && led_step_status == 4) { - led_step_status = 0; - } else { - led_step_status++; - } + case TOGGLE_CAPS_LOCK: + //msg_led = 0 or 1, off/on + set_lock_leds(USB_LED_CAPS_LOCK, msg_led); + break; - //TODO: this seems a messy way to populate the pwm register - //mimic whitefox init which uses memcpy - //populate the 9 byte rows to be written to each pin, first byte is register (pin) address - for(i=1; i<9; i++) { - pwm_register_array[i]=pwm_levels[led_step_status]; - } - for(i=0; i<8; i++) { - pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address - is31_write_data(0, pwm_register_array, 9);//first page controls pwm in all pages (init Display Option register) + case MODE_BREATH: + break; + case STEP_BRIGHTNESS: + xprintf("TOGGLE_BACKLIGHT\n"); + //led_msg = step pwm up or down + //TODO: test step brightness code + //pwm_levels[] bounds checking, loop through array + switch (msg_led) { + case 0: + if (pwm_step_status == 0) { + pwm_step_status = 4; + } else { + pwm_step_status--; + } + break; + + case 1: + if (pwm_step_status == 4) { + pwm_step_status = 0; + } else { + pwm_step_status++; + } + break; } - break; -/* case LED_MSG_SLEEP_LED_ON: - // save current settings - is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page); - is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1); - is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2); - // use pages 7 and 8 for (hardware) breathing (assuming they're empty) - is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF); - is31_write_register(7, BREATHE_LED_ADDRESS, 0x00); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3); - retval = MSG_TIMEOUT; - temp = 6; - while(retval == MSG_TIMEOUT) { - // switch to the other page - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp); - temp = (temp == 6 ? 7 : 6); - // the times should be sufficiently long for IS31 to finish switching pages - retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000)); + //populate the 9 byte rows to be written to each pin, first byte is register (pin) address + __builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8); + + for(i=0; i<8; i++) { + //first byte is register address, every 0x10 9 bytes is A-register pwm pins + pwm_register_array[0] = 0x24 + (i * 0x10); + for(j=0; j<9; j++) { + } + is31_write_data(0,pwm_register_array,9); } - // received a message (should be a wakeup), so restore previous state - chThdSleepMilliseconds(3000); // need to wait until the page change finishes - // note: any other messages are queued - is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2); - is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page); - break; - case LED_MSG_SLEEP_LED_OFF: - // should not get here; wakeup should be received in the branch above break; - break; -*/ + break; + +/* case LED_MSG_SLEEP_LED_ON: + // save current settings + is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page); + is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1); + is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2); + // use pages 7 and 8 for (hardware) breathing (assuming they're empty) + is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF); + is31_write_register(7, BREATHE_LED_ADDRESS, 0x00); + is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6); + is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3); + retval = MSG_TIMEOUT; + temp = 6; + while(retval == MSG_TIMEOUT) { + // switch to the other page + is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp); + temp = (temp == 6 ? 7 : 6); + // the times should be sufficiently long for IS31 to finish switching pages + retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000)); + } + // received a message (should be a wakeup), so restore previous state + chThdSleepMilliseconds(3000); // need to wait until the page change finishes + // note: any other messages are queued + is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1); + is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2); + is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page); + break; + case LED_MSG_SLEEP_LED_OFF: + // should not get here; wakeup should be received in the branch above break; + break; +*/ + xprintf("--------------------\n"); } - xprintf("--------------------\n"); } } - /* ============================== * led processing functions * ============================== */ @@ -451,14 +453,14 @@ void set_lock_leds(uint8_t lock_type, uint8_t led_on) { } } -void write_led_page (uint8_t page, const uint8_t *led_array, uint8_t led_count) { +void write_led_page (uint8_t page, const uint8_t *user_led_array, uint8_t led_count) { uint8_t i; uint8_t row, col; uint8_t led_control_register[0x13] = {0};//led control register start address + 0x12 bytes for(i=0;i<led_count;i++){ - row = ((led_array[i] / 10) % 10 - 1 ) * 2 + 1;//includes 1 byte shift for led register 0x00 address - col = led_array[i] % 10 - 1; + row = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1;//includes 1 byte shift for led register 0x00 address + col = user_led_array[i] % 10 - 1; led_control_register[row] |= 1<<(col); } @@ -491,22 +493,16 @@ void led_controller_init(void) { //set Display Option Register so all pwm intensity is controlled from Frame 1 is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME); + //TODO: test new init pwm loop /* set full pwm on Frame 1 */ - for(i=1; i<9; i++) { - pwm_register_array[i]=0xFF; - } + pwm_register_array[0] = 0; + __builtin_memset(pwm_register_array+1, 0xFF, 8); for(i=0; i<8; i++) { pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address is31_write_data(0, pwm_register_array, 9); chThdSleepMilliseconds(5); } - //set all led bits on for Frame 2 LEDS_ALL - //TODO: set all off in init - full_page[0] = 0; - __builtin_memset(full_page+1, 0, 0x12); - is31_write_data(1, full_page, 1+0x12); - /* enable breathing when the displayed page changes */ // Fade-in Fade-out, time = 26ms * 2^N, N=3 is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3); diff --git a/keyboards/infinity60/led_controller.h b/keyboards/infinity60/led_controller.h index 0f2d62d3d..151100471 100644 --- a/keyboards/infinity60/led_controller.h +++ b/keyboards/infinity60/led_controller.h @@ -104,7 +104,7 @@ enum led_msg_t { TOGGLE_LED, TOGGLE_ALL, TOGGLE_BACKLIGHT, - TOGGLE_LAYER_LEDS, + TOGGLE_PAGE_LEDS, TOGGLE_NUM_LOCK, TOGGLE_CAPS_LOCK, MODE_BREATH, |