diff options
24 files changed, 1275 insertions, 0 deletions
diff --git a/keyboards/otaku_split/rev0/config.h b/keyboards/otaku_split/rev0/config.h new file mode 100644 index 000000000..5e1bfaacd --- /dev/null +++ b/keyboards/otaku_split/rev0/config.h @@ -0,0 +1,251 @@ +/* +Copyright 2019 takashiski + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER takashiski +#define PRODUCT otaku_split +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B5,B4,E6,D7,C6 } +#define MATRIX_COL_PINS { B6,B2,B3,B1,F7,F6,F5,F4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/otaku_split/rev0/info.json b/keyboards/otaku_split/rev0/info.json new file mode 100644 index 000000000..b5608cb49 --- /dev/null +++ b/keyboards/otaku_split/rev0/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "Otaku split rev.0", + "url": "", + "maintainer": "takashiski", + "width": 17.75, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"\u534a\u89d2", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":9.75, "y":0}, {"label":"*", "x":10.75, "y":0}, {"label":"(", "x":11.75, "y":0}, {"label":")", "x":12.75, "y":0}, {"label":"=", "x":13.75, "y":0}, {"label":"~", "x":14.75, "y":0}, {"label":"|", "x":15.75, "y":0}, {"label":"Backspace", "x":16.75, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"7", "x":6.5, "y":1}, {"label":"Y", "x":9.25, "y":1}, {"label":"U", "x":10.25, "y":1}, {"label":"I", "x":11.25, "y":1}, {"label":"O", "x":12.25, "y":1}, {"label":"P", "x":13.25, "y":1}, {"label":"`", "x":14.25, "y":1}, {"label":"{", "x":15.25, "y":1}, {"label":"Enter", "x":16.5, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":9.5, "y":2}, {"label":"J", "x":10.5, "y":2}, {"label":"K", "x":11.5, "y":2}, {"label":"L", "x":12.5, "y":2}, {"label":"+", "x":13.5, "y":2}, {"label":"*", "x":14.5, "y":2}, {"label":"}", "x":15.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"1", "x":9, "y":3}, {"label":"N", "x":10, "y":3}, {"label":"M", "x":11, "y":3}, {"label":"<", "x":12, "y":3}, {"label":">", "x":13, "y":3}, {"label":"?", "x":14, "y":3}, {"label":"_", "x":15, "y":3}, {"label":"Shift", "x":16, "y":3, "w":1.75}, {"x":0, "y":4, "w":2}, {"label":"Ctrl", "x":2, "y":4, "w":1.25}, {"label":"Alt", "x":3.25, "y":4, "w":1.25}, {"label":"\u7121\u5909\u63db", "x":4.5, "y":4}, {"label":"\u2190", "x":5.5, "y":4}, {"label":"\u2193", "x":6.5, "y":4}, {"label":"\u2191", "x":8.75, "y":4}, {"label":"\u2192", "x":9.75, "y":4}, {"label":".", "x":10.75, "y":4}, {"label":"Menu", "x":11.75, "y":4}, {"label":"\u5909\u63db", "x":12.75, "y":4, "w":1.25}, {"label":"\u30ab\u30bf\u30ab\u30ca", "x":14, "y":4, "w":1.25}, {"label":"Alt", "x":15.25, "y":4, "w":1.25}, {"label":"Ctrl", "x":16.5, "y":4, "w":1.25}] + } + } +} diff --git a/keyboards/otaku_split/rev0/keymaps/default/config.h b/keyboards/otaku_split/rev0/keymaps/default/config.h new file mode 100644 index 000000000..25cddc6bb --- /dev/null +++ b/keyboards/otaku_split/rev0/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/otaku_split/rev0/keymaps/default/keymap.c b/keyboards/otaku_split/rev0/keymaps/default/keymap.c new file mode 100644 index 000000000..844e9c50e --- /dev/null +++ b/keyboards/otaku_split/rev0/keymaps/default/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS ,KC_EQL,KC_JYEN,KC_BSPC,\ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_ENT, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NUHS, + KC_LSHIFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLASH,KC_RO,KC_RSHIFT, + KC_LCTRL, KC_LGUI,KC_LALT,KC_MHEN,KC_TAB,KC_SPC, KC_ENT,KC_BSPC,KC_HENK,KC_KANA,KC_RALT,KC_RGUI,KC_APP,KC_RCTRL + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/otaku_split/rev0/keymaps/default/readme.md b/keyboards/otaku_split/rev0/keymaps/default/readme.md new file mode 100644 index 000000000..dbaaa2eb8 --- /dev/null +++ b/keyboards/otaku_split/rev0/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for otaku_split
\ No newline at end of file diff --git a/keyboards/otaku_split/rev0/keymaps/sample/config.h b/keyboards/otaku_split/rev0/keymaps/sample/config.h new file mode 100644 index 000000000..25cddc6bb --- /dev/null +++ b/keyboards/otaku_split/rev0/keymaps/sample/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/otaku_split/rev0/keymaps/sample/keymap.c b/keyboards/otaku_split/rev0/keymaps/sample/keymap.c new file mode 100644 index 000000000..b1df2cef0 --- /dev/null +++ b/keyboards/otaku_split/rev0/keymaps/sample/keymap.c @@ -0,0 +1,79 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +#define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__) +#define _________________QWERTY_L1_________________ KC_Q, KC_W, KC_E, KC_R, KC_T +#define _________________QWERTY_L2_________________ KC_A, KC_S, KC_D, KC_F, KC_G +#define _________________QWERTY_L3_________________ KC_Z, KC_X, KC_C, KC_V, KC_B + +#define _________________QWERTY_R1_________________ KC_Y, KC_U, KC_I, KC_O, KC_P +#define _________________QWERTY_R2_________________ KC_H, KC_J, KC_K, KC_L, KC_SCLN +#define _________________QWERTY_R3_________________ KC_N, KC_M, KC_COMM, KC_DOT, KC_SLASH + +#define ________________NUMBER_LEFT________________ KC_1, KC_2, KC_3, KC_4, KC_5 +#define ________________NUMBER_RIGHT_______________ KC_6, KC_7, KC_8, KC_9, KC_0 +#define _________________FUNC_LEFT_________________ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5 +#define _________________FUNC_RIGHT________________ KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_wrapper(\ + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS ,KC_EQL,KC_JYEN,KC_BSPC,\ + KC_TAB, _________________QWERTY_L1_________________,KC_Y, _________________QWERTY_R1_________________,KC_LBRC,KC_RBRC,KC_ENT,\ + KC_CAPS, _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,KC_QUOT,KC_NUHS,\ + KC_LSHIFT,_________________QWERTY_L3_________________, KC_B,_________________QWERTY_R3_________________,KC_RO,KC_RSHIFT,\ + KC_LCTRL, KC_LGUI,KC_LALT,KC_MHEN,KC_TAB,KC_SPC, KC_ENT,KC_BSPC,KC_HENK,KC_KANA,KC_RALT,KC_RGUI,KC_APP,KC_RCTRL\ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/otaku_split/rev0/keymaps/sample/readme.md b/keyboards/otaku_split/rev0/keymaps/sample/readme.md new file mode 100644 index 000000000..dbaaa2eb8 --- /dev/null +++ b/keyboards/otaku_split/rev0/keymaps/sample/readme.md @@ -0,0 +1 @@ +# The default keymap for otaku_split
\ No newline at end of file diff --git a/keyboards/otaku_split/rev0/readme.md b/keyboards/otaku_split/rev0/readme.md new file mode 100644 index 000000000..9103843d5 --- /dev/null +++ b/keyboards/otaku_split/rev0/readme.md @@ -0,0 +1,16 @@ +# Otaku Split rev.0 + + + +Otaku Split is Japanese layout based keyboard. +rev.0 is prototype. it has MDF color plate Iron Black and Ayanami blue. + +Keyboard Maintainer: [takashiski](https://github.com/takashiski) +Hardware Supported: promicro(atmega32u4) +Hardware Availability: https://skyhigh-works.booth.pm/items/1365150 + +Make example for this keyboard (after setting up your build environment): + + make otaku_split/rev0:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/otaku_split/rev0/rev0.c b/keyboards/otaku_split/rev0/rev0.c new file mode 100644 index 000000000..75c24b584 --- /dev/null +++ b/keyboards/otaku_split/rev0/rev0.c @@ -0,0 +1,51 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "rev0.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +/* + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +*/ diff --git a/keyboards/otaku_split/rev0/rev0.h b/keyboards/otaku_split/rev0/rev0.h new file mode 100644 index 000000000..c3040d233 --- /dev/null +++ b/keyboards/otaku_split/rev0/rev0.h @@ -0,0 +1,48 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT(\ +L00,L01,L02,L03,L04,L05,L06, R00,R01,R02,R03,R04,R05,R06,R07,\ +L10,L11,L12,L13,L14,L15,L16, R10,R11,R12,R13,R14,R15,R16,R17,\ +L20,L21,L22,L23,L24,L25, R20,R21,R22,R23,R24,R25,R26, \ +L30,L31,L32,L33,L34,L35, R30,R31,R32,R33,R34,R35,R36,R37,\ +L40,L41,L42,L43,L44,L45, R40,R41,R42,R43,R44,R45,R46,R47\ +) {\ +{L00,L01,L02,L03,L04,L05,L06,KC_NO},\ +{L10,L11,L12,L13,L14,L15,L16,KC_NO},\ +{L20,L21,L22,L23,L24,L25,KC_NO,KC_NO},\ +{L30,L31,L32,L33,L34,L35,KC_NO,KC_NO},\ +{L40,L41,L42,L43,L44,L45,KC_NO,KC_NO},\ +{R00,R01,R02,R03,R04,R05,R06,R07},\ +{R10,R11,R12,R13,R14,R15,R16,R17},\ +{R20,R21,R22,R23,R24,R25,R26,KC_NO},\ +{R30,R31,R32,R33,R34,R35,R36,R37},\ +{R40,R41,R42,R43,R44,R45,R46,R47}\ +} + + diff --git a/keyboards/otaku_split/rev0/rules.mk b/keyboards/otaku_split/rev0/rules.mk new file mode 100644 index 000000000..04e0aacb1 --- /dev/null +++ b/keyboards/otaku_split/rev0/rules.mk @@ -0,0 +1,81 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +SPLIT_KEYBOARD=yes diff --git a/keyboards/otaku_split/rev1/config.h b/keyboards/otaku_split/rev1/config.h new file mode 100644 index 000000000..e15ae40d3 --- /dev/null +++ b/keyboards/otaku_split/rev1/config.h @@ -0,0 +1,255 @@ +/* +Copyright 2019 takashiski + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER takashiski +#define PRODUCT otaku_split +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { C6,D7,E6,B4,B5 } +#define MATRIX_COL_PINS { F4,F5,F6,F7,B1,B3,B2,B6 } +#define MATRIX_ROW_PINS_RIGHT { B5,B4,E6,D7,C6 } +#define MATRIX_COL_PINS_RIGHT { B6,B2,B3,B1,F7,F6,F5,F4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 +#define SPLIT_HAND_PIN D2 //fix pin. HIGH is left, LOW is right + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/otaku_split/rev1/info.json b/keyboards/otaku_split/rev1/info.json new file mode 100644 index 000000000..9ee273375 --- /dev/null +++ b/keyboards/otaku_split/rev1/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "otaku split rev.1", + "url": "http", + "maintainer": "takashiski", + "width": 17.75, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"\u534a\u89d2", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"\"", "x":2, "y":0}, {"label":"\u00a3", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"Insert", "x":8.75, "y":0}, {"label":"&", "x":9.75, "y":0}, {"label":"*", "x":10.75, "y":0}, {"label":"(", "x":11.75, "y":0}, {"label":")", "x":12.75, "y":0}, {"label":"=", "x":13.75, "y":0}, {"label":"~", "x":14.75, "y":0}, {"label":"|", "x":15.75, "y":0}, {"label":"Backspace", "x":16.75, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"7", "x":6.5, "y":1}, {"label":"Y", "x":9.25, "y":1}, {"label":"U", "x":10.25, "y":1}, {"label":"I", "x":11.25, "y":1}, {"label":"O", "x":12.25, "y":1}, {"label":"P", "x":13.25, "y":1}, {"label":"`", "x":14.25, "y":1}, {"label":"{", "x":15.25, "y":1}, {"label":"Enter", "x":16.5, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":9.5, "y":2}, {"label":"J", "x":10.5, "y":2}, {"label":"K", "x":11.5, "y":2}, {"label":"L", "x":12.5, "y":2}, {"label":"+", "x":13.5, "y":2}, {"label":"*", "x":14.5, "y":2}, {"label":"}", "x":15.5, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"1", "x":9, "y":3}, {"label":"N", "x":10, "y":3}, {"label":"M", "x":11, "y":3}, {"label":"<", "x":12, "y":3}, {"label":">", "x":13, "y":3}, {"label":"?", "x":14, "y":3}, {"label":"_", "x":15, "y":3}, {"label":"Shift", "x":16, "y":3, "w":1.75}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4}, {"label":"Alt", "x":2.25, "y":4, "w":1.25}, {"label":"\u7121\u5909\u63db", "x":3.5, "y":4}, {"label":"2", "x":4.5, "y":4}, {"label":"\u2190", "x":5.5, "y":4}, {"label":"\u2193", "x":6.5, "y":4}, {"label":"\u2191", "x":8.75, "y":4}, {"label":"\u2192", "x":9.75, "y":4}, {"label":".", "x":10.75, "y":4}, {"label":"\u5909\u63db", "x":11.75, "y":4, "w":1.25}, {"label":"\u30ab\u30bf\u30ab\u30ca", "x":13, "y":4, "w":1.25}, {"label":"Alt", "x":14.25, "y":4, "w":1.25}, {"label":"Menu", "x":15.5, "y":4}, {"label":"Ctrl", "x":16.5, "y":4, "w":1.25}] + } + } +} diff --git a/keyboards/otaku_split/rev1/keymaps/default/config.h b/keyboards/otaku_split/rev1/keymaps/default/config.h new file mode 100644 index 000000000..25cddc6bb --- /dev/null +++ b/keyboards/otaku_split/rev1/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/otaku_split/rev1/keymaps/default/keymap.c b/keyboards/otaku_split/rev1/keymaps/default/keymap.c new file mode 100644 index 000000000..c708e53eb --- /dev/null +++ b/keyboards/otaku_split/rev1/keymaps/default/keymap.c @@ -0,0 +1,58 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +enum layers{ + BASE=0, + CURSOR +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = LAYOUT( + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS ,KC_EQL,KC_JYEN,KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_ENT, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NUHS, + KC_LSHIFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLASH,KC_RO,KC_RSHIFT, + KC_LCTRL, KC_LGUI,KC_LALT,KC_MHEN,LT(CURSOR,KC_TAB),KC_SPC,KC_SPC, LT(CURSOR,KC_SPC),KC_ENT,KC_BSPC,KC_HENK,LT(CURSOR,KC_KANA),KC_RALT,KC_APP,KC_RCTRL + ), + [CURSOR] = LAYOUT( + KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_JYEN,KC_DEL, + KC_TAB, KC_Q, KC_UP, KC_E, KC_R, KC_T, KC_Y, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_PSCR, + KC_CAPS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_F, KC_G, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_SCLN, KC_QUOT,KC_NUHS, + KC_LSHIFT,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_END,KC_UP,KC_HOME, + KC_LCTRL, KC_LGUI,KC_LALT,KC_MHEN,KC_TRNS,KC_SPC,KC_SPC, KC_TRNS,KC_ENT,KC_BSPC,KC_HENK,KC_TRNS,KC_LEFT,KC_DOWN,KC_RIGHT + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/otaku_split/rev1/keymaps/default/readme.md b/keyboards/otaku_split/rev1/keymaps/default/readme.md new file mode 100644 index 000000000..dbaaa2eb8 --- /dev/null +++ b/keyboards/otaku_split/rev1/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for otaku_split
\ No newline at end of file diff --git a/keyboards/otaku_split/rev1/keymaps/sample/config.h b/keyboards/otaku_split/rev1/keymaps/sample/config.h new file mode 100644 index 000000000..25cddc6bb --- /dev/null +++ b/keyboards/otaku_split/rev1/keymaps/sample/config.h @@ -0,0 +1,19 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/otaku_split/rev1/keymaps/sample/keymap.c b/keyboards/otaku_split/rev1/keymaps/sample/keymap.c new file mode 100644 index 000000000..6875f462f --- /dev/null +++ b/keyboards/otaku_split/rev1/keymaps/sample/keymap.c @@ -0,0 +1,85 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +// Defines the keycodes used by our macros in process_record_user + +#define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__) +#define _________________QWERTY_L1_________________ KC_Q, KC_W, KC_E, KC_R, KC_T +#define _________________QWERTY_L2_________________ KC_A, KC_S, KC_D, KC_F, KC_G +#define _________________QWERTY_L3_________________ KC_Z, KC_X, KC_C, KC_V, KC_B + +#define _________________QWERTY_R1_________________ KC_Y, KC_U, KC_I, KC_O, KC_P +#define _________________QWERTY_R2_________________ KC_H, KC_J, KC_K, KC_L, KC_SCLN +#define _________________QWERTY_R3_________________ KC_N, KC_M, KC_COMM, KC_DOT, KC_SLASH + +#define ________________NUMBER_LEFT________________ KC_1, KC_2, KC_3, KC_4, KC_5 +#define ________________NUMBER_RIGHT_______________ KC_6, KC_7, KC_8, KC_9, KC_0 +#define _________________FUNC_LEFT_________________ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5 +#define _________________FUNC_RIGHT________________ KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 + +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +enum layers{ + BASE=0 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = LAYOUT_wrapper(\ + KC_GRAVE, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINUS ,KC_EQL,KC_JYEN,KC_BSPC,\ + KC_TAB, _________________QWERTY_L1_________________,KC_Y, _________________QWERTY_R1_________________,KC_LBRC,KC_RBRC,KC_ENT,\ + KC_CAPS, _________________QWERTY_L2_________________, _________________QWERTY_R2_________________,KC_QUOT,KC_NUHS,\ + KC_LSHIFT,_________________QWERTY_L3_________________, KC_B,_________________QWERTY_R3_________________,KC_RO,KC_RSHIFT,\ + KC_LCTRL, KC_LGUI,KC_LALT,KC_MHEN,KC_TAB,KC_SPC,KC_SPC, KC_SPC,KC_ENT,KC_BSPC,KC_HENK,KC_KANA,KC_RALT,KC_APP,KC_RCTRL\ + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/otaku_split/rev1/keymaps/sample/readme.md b/keyboards/otaku_split/rev1/keymaps/sample/readme.md new file mode 100644 index 000000000..dbaaa2eb8 --- /dev/null +++ b/keyboards/otaku_split/rev1/keymaps/sample/readme.md @@ -0,0 +1 @@ +# The default keymap for otaku_split
\ No newline at end of file diff --git a/keyboards/otaku_split/rev1/readme.md b/keyboards/otaku_split/rev1/readme.md new file mode 100644 index 000000000..592c82641 --- /dev/null +++ b/keyboards/otaku_split/rev1/readme.md @@ -0,0 +1,19 @@ +# otaku_split + + + + + +This is JP layout based split keyboards. + + + +Keyboard Maintainer: [takashiski](https://github.com/takashiski) +Hardware Supported: promicro(atmega32u4) on Otaku Split rev.1 PCB +Hardware Availability: https://skyhigh-works.booth.pm/items/1398595 + +Make example for this keyboard (after setting up your build environment): + + make otaku_split/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/otaku_split/rev1/rev1.c b/keyboards/otaku_split/rev1/rev1.c new file mode 100644 index 000000000..88b42eb95 --- /dev/null +++ b/keyboards/otaku_split/rev1/rev1.c @@ -0,0 +1,51 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "rev1.h" + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +/* + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} + +*/ diff --git a/keyboards/otaku_split/rev1/rev1.h b/keyboards/otaku_split/rev1/rev1.h new file mode 100644 index 000000000..a1f71f033 --- /dev/null +++ b/keyboards/otaku_split/rev1/rev1.h @@ -0,0 +1,47 @@ +/* Copyright 2019 takashiski + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT(\ +L00,L01,L02,L03,L04,L05,L06, R00,R01,R02,R03,R04,R05,R06,R07,R17,\ +L10,L11,L12,L13,L14,L15,L16, R10,R11,R12,R13,R14,R15,R16,R27,\ +L20,L21,L22,L23,L24,L25, R20,R21,R22,R23,R24,R25,R26, \ +L30,L31,L32,L33,L34,L35, R30,R31,R32,R33,R34,R35,R36,R37,\ +L40,L41,L42,L43,L44,L45,L46, R40,R41,R42,R43,R44,R45,R46,R47\ +) {\ +{L00,L01,L02,L03,L04,L05,L06,KC_NO},\ +{L10,L11,L12,L13,L14,L15,L16,KC_NO},\ +{L20,L21,L22,L23,L24,L25,KC_NO,KC_NO},\ +{L30,L31,L32,L33,L34,L35,KC_NO,KC_NO},\ +{L40,L41,L42,L43,L44,L45,L46,KC_NO},\ +{R00,R01,R02,R03,R04,R05,R06,R07},\ +{R10,R11,R12,R13,R14,R15,R16,R17},\ +{R20,R21,R22,R23,R24,R25,R26,R27},\ +{R30,R31,R32,R33,R34,R35,R36,R37},\ +{R40,R41,R42,R43,R44,R45,R46,R47}\ +} + diff --git a/keyboards/otaku_split/rev1/rules.mk b/keyboards/otaku_split/rev1/rules.mk new file mode 100644 index 000000000..04e0aacb1 --- /dev/null +++ b/keyboards/otaku_split/rev1/rules.mk @@ -0,0 +1,81 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +SPLIT_KEYBOARD=yes |