diff options
Diffstat (limited to 'keyboard/planck/keymaps/mollat/keymap.c')
| -rw-r--r-- | keyboard/planck/keymaps/mollat/keymap.c | 149 |
1 files changed, 0 insertions, 149 deletions
diff --git a/keyboard/planck/keymaps/mollat/keymap.c b/keyboard/planck/keymaps/mollat/keymap.c deleted file mode 100644 index e7c71efd4..000000000 --- a/keyboard/planck/keymaps/mollat/keymap.c +++ /dev/null @@ -1,149 +0,0 @@ -// -// This layout is based on the following needs: -// -// should be as close as possible to querty/us-international layout (using international/AltGr as o/s driver) -// added german umlauts at known places from de-layout -// all movement keys should be at known places from vi/bash (eg HJKL for cursor keys) -// Fn layer (at CapsLock place like the Pok3r does) for missing keys -// additional layer for tmux window switching -// -// This is work in Progress! If you have suggestions write me at github.com/mollat/qmk_firmware/ and check -// this fork for updates as I probably won't bother jack with my pull requests frequently. -// - -#include "planck.h" - -#define _QWERTY 0 -#define _HIGH 1 -#define _LOW 2 -#define _FN 3 -#define _TMUX 4 -#define _LCTL 5 -#define _MOUSE 6 -#define __________ KC_NO // just for easy reading - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -[_QWERTY] = { /* Qwerty */ - { LT(_MOUSE, KC_ESC),KC_Q,KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC }, - { LT(_FN, KC_TAB),KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT }, - { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, SFT_T(KC_ENT)}, - { __________, __________, KC_LGUI, KC_LALT, KC_LCTL,LT(_TMUX, KC_SPC),LT(_HIGH, KC_SPC),MO(_LOW),KC_RALT,KC_RGUI, __________, __________ } -}, - -// missing keys regarding to the form factor -// keeping the dot and comma for typing faster IP addresses and (german) float values -// putting the backslash on the slash's place -[_HIGH] = { - { KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_MINS }, - { __________, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_EQL }, - { __________, __________, __________, __________, __________, __________, __________, __________, KC_COMM, KC_DOT, KC_BSLS, LSFT(KC_BSLS)}, - { __________, __________, __________, __________, __________, __________, KC_TRNS, __________, __________, __________, __________, __________ } -}, - -// classic Fn-Layer triggered with 'CapsLock-key' like on Pok3r -// SPC and ENT are doubled for using repeat (which I switched off, see https://github.com/tmk/tmk_keyboard/issues/287) -// '€' sign is on the '5' position as this is the usual AltGr place on the US Internation layout -// home/end at the 'a' and 'e' position like in bash -// ins at 'i' -// del besides backspace (had no better place for it because of the umlauts) -// pg-down at 'f' (forward in vi), pg-up at 'b' (back in 'vi') -// -[_FN] = { - { __________, __________, __________, KC_END, __________, __________, __________, __________, KC_INS, __________, KC_DEL, RALT(KC_Y) }, - { KC_TRNS, __________, RALT(KC_S), __________, KC_PGDN, RALT(KC_5), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, RALT(KC_P), RALT(KC_Q) }, - { __________, KC_HOME, __________, __________, __________, KC_PGUP, __________, __________, __________, __________, __________, KC_ENT }, - { RESET, __________, __________, __________, __________, KC_SPC, KC_SPC, __________, __________, __________, __________, __________ } -}, - -// function key layer and some shift + (missing key at the small form factor) -[_LOW] = { - { KC_TILD, __________, __________, __________, __________, __________, __________, __________, __________, KC_LCBR, KC_RCBR, KC_UNDS }, - { __________, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_LBRC, KC_RBRC, KC_PLUS }, - { __________, __________, __________, __________, __________, KC_F9, KC_F10, KC_F11, KC_F12, __________, __________, __________ }, - { __________, __________, __________, __________, __________, __________, __________, KC_TRNS, __________, __________, __________, __________ } -}, - -// most macros will switch tmux screens -// two macros are for vi's save/quit at 'w' and 'q' -[_TMUX] = { - { __________, M(14), M(13), __________, __________, __________, __________, __________, __________, __________, M(11), __________ }, - { M(0), M(1), M(2), M(3), M(4), M(5), M(6), M(7), M(8), M(9), __________, __________ }, - { __________, __________, __________, M(12), __________, __________, M(10), __________, __________, __________, __________, __________ }, - { __________, __________, __________, __________, __________, KC_TRNS, __________, __________, __________, __________, __________, __________ } -}, - -// mouse movement can be improved (e.g. can't press hj at once), but I will use this seldom, so I stick with hjkl keys. -[_MOUSE] = { - { KC_TRNS, __________, __________, __________, __________, __________, __________, __________, __________, __________, __________, __________ }, - { __________, __________, __________, __________, KC_WH_D, __________, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, __________, __________ }, - { __________, __________, __________, __________, __________, KC_WH_U, __________, __________, __________, __________, __________, __________ }, - { __________, __________, __________, KC_ACL2, KC_ACL1, KC_ACL0, KC_MS_BTN1, KC_MS_BTN3, KC_MS_BTN2, __________, __________, __________ } -} -}; - -const uint16_t PROGMEM fn_actions[] = { - [_LCTL] = ACTION_MODS_TAP_KEY(KC_LCTL, M(12)), // does not work -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case 0: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_0), END ); - break; - case 1: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_1), END ); - break; - case 2: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_2), END ); - break; - case 3: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_3), END ); - break; - case 4: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_4), END ); - break; - case 5: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_5), END ); - break; - case 6: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_6), END ); - break; - case 7: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_7), END ); - break; - case 8: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_8), END ); - break; - case 9: - // tmux last window - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_L), END ); - break; - // tmux next window - case 10: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_N), END ); - break; - // tmux previous window - case 11: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_P), END ); - break; - // tmux new window - case 12: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), TYPE(KC_C), END ); - break; - case 13: - // vi save document - return MACRODOWN( TYPE(KC_ESC), DOWN(KC_LSFT), TYPE(KC_SCLN), UP(KC_LSFT), TYPE(KC_W), TYPE(KC_ENT), END ); - break; - case 14: - // vi quit - return MACRODOWN( TYPE(KC_ESC), DOWN(KC_LSFT), TYPE(KC_SCLN), UP(KC_LSFT), TYPE(KC_Q), TYPE(KC_ENT), END ); - break; - // tmux press ctrl-b - case 15: - return MACRODOWN( DOWN(KC_LCTL), TYPE(KC_B), UP(KC_LCTL), END ); - break; - } - return MACRO_NONE; -}; |