4 files changed, 161 insertions, 0 deletions
diff --git a/keyboards/40percentclub/i75/teensy2/config.h b/keyboards/40percentclub/i75/teensy2/config.h
new file mode 100644
index 000000000..fdbde8d64
--- /dev/null
+++ b/keyboards/40percentclub/i75/teensy2/config.h
@@ -0,0 +1,40 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "config_common.h"
+
+/* key matrix size */
+#define MATRIX_ROWS 9
+#define MATRIX_COLS 9
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { D3, D2, D1, D0, B7, B3, B2, B1, B0 }
+#define MATRIX_COL_PINS { C6, C7, D6, D7, B5, B6, F7, F6, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
diff --git a/keyboards/40percentclub/i75/teensy2/rules.mk b/keyboards/40percentclub/i75/teensy2/rules.mk
new file mode 100644
index 000000000..3fb7c7e5a
--- /dev/null
+++ b/keyboards/40percentclub/i75/teensy2/rules.mk
@@ -0,0 +1,58 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
+BOOTLOADER = halfkay
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+#   Teensy halfKay      512
+#   Teensy++ halfKay    1024
+#   Atmel DFU loader    4096
+#   LUFA bootloader     4096
+#   USBaspLoader        2048
+# OPT_DEFS += -DBOOTLOADER_SIZE=4096
diff --git a/keyboards/40percentclub/i75/teensy2/teensy2.c b/keyboards/40percentclub/i75/teensy2/teensy2.c
new file mode 100644
index 000000000..28684e714
--- /dev/null
+++ b/keyboards/40percentclub/i75/teensy2/teensy2.c
@@ -0,0 +1,16 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "i75.h"
diff --git a/keyboards/40percentclub/i75/teensy2/teensy2.h b/keyboards/40percentclub/i75/teensy2/teensy2.h
new file mode 100644
index 000000000..29394855a
--- /dev/null
+++ b/keyboards/40percentclub/i75/teensy2/teensy2.h
@@ -0,0 +1,47 @@
+/* Copyright 2018
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+
+#include "i75.h"
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_ortho_5x15( \
+    K00, K01, K02, K03, K04, K05, K06, K07, K08, K10, K11, K12, K13, K14, K15, \
+    K16, K17, K18, K20, K21, K22, K23, K24, K25, K26, K27, K28, K30, K31, K32, \
+    K33, K34, K35, K36, K37, K38, K40, K41, K42, K43, K44, K45, K46, K47, K48, \
+    K50, K51, K52, K53, K54, K55, K56, K57, K58, K60, K61, K62, K63, K64, K65, \
+    K66, K67, K68, K70, K71, K72, K73, K74, K75, K76, K77, K78, K80, K81, K82  \
+) \
+{ \
+  { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \
+  { K10, K11, K12, K13, K14, K15, K16, K17, K18 }, \
+  { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \
+  { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \
+  { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \
+  { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \
+  { K60, K61, K62, K63, K64, K65, K66, K67, K68 }, \
+  { K70, K71, K72, K73, K74, K75, K76, K77, K78 }, \
+  { K80, K81, K82 } \
+}