aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/alf
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/alf')
-rw-r--r--keyboards/alf/dc60/keymaps/default/keymap.c16
-rw-r--r--keyboards/alf/dc60/rules.mk55
-rw-r--r--keyboards/alf/x11/info.json209
-rw-r--r--keyboards/alf/x11/keymaps/default/keymap.c77
-rw-r--r--keyboards/alf/x11/rules.mk52
-rw-r--r--keyboards/alf/x11/x11.c67
-rw-r--r--keyboards/alf/x11/x11.h26
-rw-r--r--keyboards/alf/x2/keymaps/default/keymap.c4
-rw-r--r--keyboards/alf/x2/rules.mk50
9 files changed, 195 insertions, 361 deletions
diff --git a/keyboards/alf/dc60/keymaps/default/keymap.c b/keyboards/alf/dc60/keymaps/default/keymap.c
index a4385bcc0..acd9753ef 100644
--- a/keyboards/alf/dc60/keymaps/default/keymap.c
+++ b/keyboards/alf/dc60/keymaps/default/keymap.c
@@ -33,22 +33,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
};
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
-{
- // MACRODOWN only works in this function
- switch(id) {
- case 0:
- if (record->event.pressed) {
- register_code(KC_RSFT);
- } else {
- unregister_code(KC_RSFT);
- }
- break;
- }
- return MACRO_NONE;
-};
-
-
void matrix_init_user(void) {
}
diff --git a/keyboards/alf/dc60/rules.mk b/keyboards/alf/dc60/rules.mk
index 9ad6d7875..8df6c4c7c 100644
--- a/keyboards/alf/dc60/rules.mk
+++ b/keyboards/alf/dc60/rules.mk
@@ -1,52 +1,15 @@
# MCU name
-#MCU = at90usb1286
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
diff --git a/keyboards/alf/x11/info.json b/keyboards/alf/x11/info.json
index ca794f56c..54f2da66d 100644
--- a/keyboards/alf/x11/info.json
+++ b/keyboards/alf/x11/info.json
@@ -1,103 +1,112 @@
{
- "keyboard_name": "QMK80",
- "url": "",
- "maintainer": "qmk",
- "width": 18.25,
- "height": 6.5,
- "layouts": {
- "LAYOUT": {
- "key_count": 88,
- "layout": [
- {"label":"K00", "x":0, "y":0},
- {"label":"K01", "x":2, "y":0},
- {"label":"K02", "x":3, "y":0},
- {"label":"K03", "x":4, "y":0},
- {"label":"K04", "x":5, "y":0},
- {"label":"K05", "x":6.5, "y":0},
- {"label":"K06", "x":7.5, "y":0},
- {"label":"K07", "x":8.5, "y":0},
- {"label":"K08", "x":9.5, "y":0},
- {"label":"K09", "x":11, "y":0},
- {"label":"K0A", "x":12, "y":0},
- {"label":"K0B", "x":13, "y":0},
- {"label":"K0C", "x":14, "y":0},
- {"label":"K60", "x":15.25, "y":0},
- {"label":"K61", "x":16.25, "y":0},
- {"label":"K62", "x":17.25, "y":0},
- {"label":"K10", "x":0, "y":1.5},
- {"label":"K11", "x":1, "y":1.5},
- {"label":"K12", "x":2, "y":1.5},
- {"label":"K13", "x":3, "y":1.5},
- {"label":"K14", "x":4, "y":1.5},
- {"label":"K15", "x":5, "y":1.5},
- {"label":"K16", "x":6, "y":1.5},
- {"label":"K17", "x":7, "y":1.5},
- {"label":"K18", "x":8, "y":1.5},
- {"label":"K19", "x":9, "y":1.5},
- {"label":"K1A", "x":10, "y":1.5},
- {"label":"K1B", "x":11, "y":1.5},
- {"label":"K1C", "x":12, "y":1.5},
- {"label":"K5A", "x":13, "y":1.5, "w":2},
- {"label":"K63", "x":15.25, "y":1.5},
- {"label":"K65", "x":16.25, "y":1.5},
- {"label":"K67", "x":17.25, "y":1.5},
- {"label":"K20", "x":0, "y":2.5, "w":1.5},
- {"label":"K21", "x":1.5, "y":2.5},
- {"label":"K22", "x":2.5, "y":2.5},
- {"label":"K23", "x":3.5, "y":2.5},
- {"label":"K24", "x":4.5, "y":2.5},
- {"label":"K25", "x":5.5, "y":2.5},
- {"label":"K26", "x":6.5, "y":2.5},
- {"label":"K27", "x":7.5, "y":2.5},
- {"label":"K28", "x":8.5, "y":2.5},
- {"label":"K29", "x":9.5, "y":2.5},
- {"label":"K2A", "x":10.5, "y":2.5},
- {"label":"K2B", "x":11.5, "y":2.5},
- {"label":"K2C", "x":12.5, "y":2.5},
- {"label":"K4C", "x":13.5, "y":2.5, "w":1.5},
- {"label":"K64", "x":15.25, "y":2.5},
- {"label":"K66", "x":16.25, "y":2.5},
- {"label":"K68", "x":17.25, "y":2.5},
- {"label":"K30", "x":0, "y":3.5, "w":1.75},
- {"label":"K31", "x":1.75, "y":3.5},
- {"label":"K32", "x":2.75, "y":3.5},
- {"label":"K33", "x":3.75, "y":3.5},
- {"label":"K34", "x":4.75, "y":3.5},
- {"label":"K35", "x":5.75, "y":3.5},
- {"label":"K36", "x":6.75, "y":3.5},
- {"label":"K37", "x":7.75, "y":3.5},
- {"label":"K38", "x":8.75, "y":3.5},
- {"label":"K39", "x":9.75, "y":3.5},
- {"label":"K3A", "x":10.75, "y":3.5},
- {"label":"K3B", "x":11.75, "y":3.5},
- {"label":"K3C", "x":12.75, "y":3.5, "w":2.25},
- {"label":"K40", "x":0, "y":4.5, "w":2.25},
- {"label":"K41", "x":2.25, "y":4.5},
- {"label":"K42", "x":3.25, "y":4.5},
- {"label":"K43", "x":4.25, "y":4.5},
- {"label":"K44", "x":5.25, "y":4.5},
- {"label":"K45", "x":6.25, "y":4.5},
- {"label":"K46", "x":7.25, "y":4.5},
- {"label":"K47", "x":8.25, "y":4.5},
- {"label":"K48", "x":9.25, "y":4.5},
- {"label":"K49", "x":10.25, "y":4.5},
- {"label":"K4A", "x":11.25, "y":4.5},
- {"label":"K4B", "x":12.25, "y":4.5, "w":1.75},
- {"label":"K69", "x":14, "y":4.5},
- {"label":"K58", "x":16.25, "y":4.5},
- {"label":"K50", "x":0, "y":5.5, "w":1.25},
- {"label":"K51", "x":1.25, "y":5.5, "w":1.25},
- {"label":"K52", "x":2.5, "y":5.5, "w":1.25},
- {"label":"K53", "x":3.75, "y":5.5, "w":6.25},
- {"label":"K54", "x":10, "y":5.5, "w":1.25},
- {"label":"K55", "x":11.25, "y":5.5, "w":1.25},
- {"label":"K56", "x":12.5, "y":5.5, "w":1.25},
- {"label":"K57", "x":13.75, "y":5.5, "w":1.25},
- {"label":"K6A", "x":15.25, "y":5.5},
- {"label":"K59", "x":16.25, "y":5.5},
- {"label":"K6B", "x":17.25, "y":5.5}
- ]
- }
+ "keyboard_name": "x11",
+ "url": "",
+ "maintainer": "qmk",
+ "width": 18.25,
+ "height": 6.5,
+ "layouts": {
+ "LAYOUT": {
+ "key_count": 88,
+ "layout": [
+ {"label":"K00", "x":0, "y":0},
+ {"label":"K01", "x":2, "y":0},
+ {"label":"K02", "x":3, "y":0},
+ {"label":"K03", "x":4, "y":0},
+ {"label":"K04", "x":5, "y":0},
+ {"label":"K05", "x":6.5, "y":0},
+ {"label":"K06", "x":7.5, "y":0},
+ {"label":"K07", "x":8.5, "y":0},
+ {"label":"K08", "x":9.5, "y":0},
+ {"label":"K09", "x":11, "y":0},
+ {"label":"K0A", "x":12, "y":0},
+ {"label":"K0B", "x":13, "y":0},
+ {"label":"K0C", "x":14, "y":0},
+
+ {"label":"K62", "x":15.25, "y":0},
+ {"label":"K61", "x":16.25, "y":0},
+ {"label":"K60", "x":17.25, "y":0},
+
+ {"label":"K10", "x":0, "y":1.5},
+ {"label":"K11", "x":1, "y":1.5},
+ {"label":"K12", "x":2, "y":1.5},
+ {"label":"K13", "x":3, "y":1.5},
+ {"label":"K14", "x":4, "y":1.5},
+ {"label":"K15", "x":5, "y":1.5},
+ {"label":"K16", "x":6, "y":1.5},
+ {"label":"K17", "x":7, "y":1.5},
+ {"label":"K18", "x":8, "y":1.5},
+ {"label":"K19", "x":9, "y":1.5},
+ {"label":"K1A", "x":10, "y":1.5},
+ {"label":"K1B", "x":11, "y":1.5},
+ {"label":"K1C", "x":12, "y":1.5},
+ {"label":"K5A", "x":13, "y":1.5, "w":2},
+
+ {"label":"K63", "x":15.25, "y":1.5},
+ {"label":"K65", "x":16.25, "y":1.5},
+ {"label":"K67", "x":17.25, "y":1.5},
+
+ {"label":"K20", "x":0, "y":2.5, "w":1.5},
+ {"label":"K21", "x":1.5, "y":2.5},
+ {"label":"K22", "x":2.5, "y":2.5},
+ {"label":"K23", "x":3.5, "y":2.5},
+ {"label":"K24", "x":4.5, "y":2.5},
+ {"label":"K25", "x":5.5, "y":2.5},
+ {"label":"K26", "x":6.5, "y":2.5},
+ {"label":"K27", "x":7.5, "y":2.5},
+ {"label":"K28", "x":8.5, "y":2.5},
+ {"label":"K29", "x":9.5, "y":2.5},
+ {"label":"K2A", "x":10.5, "y":2.5},
+ {"label":"K2B", "x":11.5, "y":2.5},
+ {"label":"K2C", "x":12.5, "y":2.5},
+ {"label":"K4C", "x":13.5, "y":2.5, "w":1.5},
+
+ {"label":"K64", "x":15.25, "y":2.5},
+ {"label":"K66", "x":16.25, "y":2.5},
+ {"label":"K68", "x":17.25, "y":2.5},
+
+ {"label":"K30", "x":0, "y":3.5, "w":1.75},
+ {"label":"K31", "x":1.75, "y":3.5},
+ {"label":"K32", "x":2.75, "y":3.5},
+ {"label":"K33", "x":3.75, "y":3.5},
+ {"label":"K34", "x":4.75, "y":3.5},
+ {"label":"K35", "x":5.75, "y":3.5},
+ {"label":"K36", "x":6.75, "y":3.5},
+ {"label":"K37", "x":7.75, "y":3.5},
+ {"label":"K38", "x":8.75, "y":3.5},
+ {"label":"K39", "x":9.75, "y":3.5},
+ {"label":"K3A", "x":10.75, "y":3.5},
+ {"label":"K3B", "x":11.75, "y":3.5},
+ {"label":"K3C", "x":12.75, "y":3.5, "w":2.25},
+
+ {"label":"K40", "x":0, "y":4.5, "w":2.25},
+ {"label":"K41", "x":2.25, "y":4.5},
+ {"label":"K42", "x":3.25, "y":4.5},
+ {"label":"K43", "x":4.25, "y":4.5},
+ {"label":"K44", "x":5.25, "y":4.5},
+ {"label":"K45", "x":6.25, "y":4.5},
+ {"label":"K46", "x":7.25, "y":4.5},
+ {"label":"K47", "x":8.25, "y":4.5},
+ {"label":"K48", "x":9.25, "y":4.5},
+ {"label":"K49", "x":10.25, "y":4.5},
+ {"label":"K4A", "x":11.25, "y":4.5},
+ {"label":"K4B", "x":12.25, "y":4.5, "w":1.75},
+ {"label":"K69", "x":14, "y":4.5},
+
+ {"label":"K58", "x":16.25, "y":4.5},
+
+ {"label":"K50", "x":0, "y":5.5, "w":1.25},
+ {"label":"K51", "x":1.25, "y":5.5, "w":1.25},
+ {"label":"K52", "x":2.5, "y":5.5, "w":1.25},
+ {"label":"K53", "x":3.75, "y":5.5, "w":6.25},
+ {"label":"K54", "x":10, "y":5.5, "w":1.25},
+ {"label":"K55", "x":11.25, "y":5.5, "w":1.25},
+ {"label":"K56", "x":12.5, "y":5.5, "w":1.25},
+ {"label":"K57", "x":13.75, "y":5.5, "w":1.25},
+
+ {"label":"K6A", "x":15.25, "y":5.5},
+ {"label":"K59", "x":16.25, "y":5.5},
+ {"label":"K6B", "x":17.25, "y":5.5}
+ ]
}
}
- \ No newline at end of file
+}
diff --git a/keyboards/alf/x11/keymaps/default/keymap.c b/keyboards/alf/x11/keymaps/default/keymap.c
index cd97dd0a2..f0747d345 100644
--- a/keyboards/alf/x11/keymaps/default/keymap.c
+++ b/keyboards/alf/x11/keymaps/default/keymap.c
@@ -15,64 +15,23 @@
*/
#include QMK_KEYBOARD_H
-// Defines the keycodes used by our macros in process_record_user
-enum custom_keycodes {
- QMKBEST = SAFE_RANGE,
- QMKURL
-};
-
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- [0] = LAYOUT( \
- KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
- KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, \
- KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, \
- KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_CAPS, KC_A, \
- KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, \
- KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_LCTL, \
- KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \
- ),
- [1] = LAYOUT( \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_MPLY, KC_MSTP, RGB_TOG, RGB_MOD, \
- RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, KC_TRNS, \
- KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, RGB_VAD, RGB_SAD \
- ),
-
+ [0] = LAYOUT(
+ KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
+
+ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
+ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
+ KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
+ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP,
+ KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
+ ),
+ [1] = LAYOUT(
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET,
+
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ BL_TOGG, BL_DEC, BL_INC, BL_STEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_MPLY, KC_MSTP,
+ RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
+ )
};
-
-bool process_record_user(uint16_t keycode, keyrecord_t *record) {
- switch (keycode) {
- case QMKBEST:
- if (record->event.pressed) {
- // when keycode QMKBEST is pressed
- SEND_STRING("QMK is the best thing ever!");
- } else {
- // when keycode QMKBEST is released
- }
- break;
- case QMKURL:
- if (record->event.pressed) {
- // when keycode QMKURL is pressed
- SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
- } else {
- // when keycode QMKURL is released
- }
- break;
- }
- return true;
-}
-
-void matrix_init_user(void) {
-
-}
-
-void matrix_scan_user(void) {
-
-}
-
-void led_set_user(uint8_t usb_led) {
-
-}
diff --git a/keyboards/alf/x11/rules.mk b/keyboards/alf/x11/rules.mk
index 180c60a4a..3439ac47f 100644
--- a/keyboards/alf/x11/rules.mk
+++ b/keyboards/alf/x11/rules.mk
@@ -1,64 +1,16 @@
# MCU name
-#MCU = at90usb1286
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
-# atmega32a bootloadHID
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
-# If you don't know the bootloader type, then you can specify the
-# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
-# Teensy halfKay 512
-# Teensy++ halfKay 1024
-# Atmel DFU loader 4096
-# LUFA bootloader 4096
-# USBaspLoader 2048
-# OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
# Build Options
# change yes to no to disable
#
diff --git a/keyboards/alf/x11/x11.c b/keyboards/alf/x11/x11.c
index b91de016e..9699918d5 100644
--- a/keyboards/alf/x11/x11.c
+++ b/keyboards/alf/x11/x11.c
@@ -16,48 +16,49 @@
#include "x11.h"
void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- setPinOutput(C6);
- setPinOutput(E6);
- setPinOutput(C7);
- matrix_init_user();
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ setPinOutput(C6);
+ setPinOutput(E6);
+ setPinOutput(C7);
+ matrix_init_user();
}
void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
- matrix_scan_user();
+ matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
- return process_record_user(keycode, record);
+ return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- writePinLow(C6);
- } else {
- writePinHigh(C6);
- }
-
- if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
- writePinLow(E6);
- } else {
- writePinHigh(E6);
- }
-
- if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
- writePinLow(C7);
- } else {
- writePinHigh(C7);
- }
-
- led_set_user(usb_led);
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
+ writePinLow(C6);
+ } else {
+ writePinHigh(C6);
+ }
+
+ if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+ writePinLow(E6);
+ } else {
+ writePinHigh(E6);
+ }
+
+ if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
+ writePinLow(C7);
+ } else {
+ writePinHigh(C7);
+ }
+
+ led_set_user(usb_led);
}
diff --git a/keyboards/alf/x11/x11.h b/keyboards/alf/x11/x11.h
index 53f3a3e34..2a1d886fd 100644
--- a/keyboards/alf/x11/x11.h
+++ b/keyboards/alf/x11/x11.h
@@ -26,18 +26,18 @@
* represents the switch matrix.
*/
#define LAYOUT( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K60, K61, K62, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K5A, K63, K65, K67, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K4C, K64, K66, K68, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
- K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K69, K58, \
- K50, K51, K52, K53, K54, K55, K56, K57, K6A, K59, K6B \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K62, K61, K60, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K5A, K63, K65, K67, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K4C, K64, K66, K68, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \
+ K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K69, K58, \
+ K50, K51, K52, K53, K54, K55, K56, K57, K6A, K59, K6B \
) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C }, \
- { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C }, \
- { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, KC_NO, KC_NO }, \
- { K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, KC_NO }, \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C }, \
+ { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C }, \
+ { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, KC_NO, KC_NO }, \
+ { K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, KC_NO }, \
}
diff --git a/keyboards/alf/x2/keymaps/default/keymap.c b/keyboards/alf/x2/keymaps/default/keymap.c
index 9470e38b5..eb3d7bd46 100644
--- a/keyboards/alf/x2/keymaps/default/keymap.c
+++ b/keyboards/alf/x2/keymaps/default/keymap.c
@@ -19,10 +19,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
};
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
- return MACRO_NONE;
-}
-
void matrix_init_user(void) {
}
diff --git a/keyboards/alf/x2/rules.mk b/keyboards/alf/x2/rules.mk
index 9c4082da2..1e6d4bb7c 100644
--- a/keyboards/alf/x2/rules.mk
+++ b/keyboards/alf/x2/rules.mk
@@ -1,45 +1,15 @@
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
+BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
@@ -53,4 +23,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
AUDIO_ENABLE = no
-RGBLIGHT_ENABLE = yes \ No newline at end of file
+RGBLIGHT_ENABLE = yes
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-29 04:29:29 +0000