1 files changed, 27 insertions, 19 deletions

diff --git a/keyboards/cannonkeys/satisfaction75/i2c_master.c b/keyboards/cannonkeys/satisfaction75/i2c_master.c
index d81eb92d4..ce0e0a7ba 100644
--- a/keyboards/cannonkeys/satisfaction75/i2c_master.c
+++ b/keyboards/cannonkeys/satisfaction75/i2c_master.c
@@ -29,8 +29,6 @@
 #include "quantum.h"
 #include <string.h>
 #include <hal.h>
-#include "chtypes.h"
-#include "ch.h"
 
 static uint8_t i2c_address;
 
@@ -44,6 +42,18 @@ static const I2CConfig i2cconfig = {
   0
 };
 
+static i2c_status_t chibios_to_qmk(const msg_t* status) {
+  switch (*status) {
+    case I2C_NO_ERROR:
+      return I2C_STATUS_SUCCESS;
+    case I2C_TIMEOUT:
+      return I2C_STATUS_TIMEOUT;
+    // I2C_BUS_ERROR, I2C_ARBITRATION_LOST, I2C_ACK_FAILURE, I2C_OVERRUN, I2C_PEC_ERROR, I2C_SMB_ALERT
+    default:
+      return I2C_STATUS_ERROR;
+  }
+}
+
 __attribute__ ((weak))
 void i2c_init(void)
 {
@@ -59,34 +69,32 @@ void i2c_init(void)
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }
 
-// This is usually not needed
-uint8_t i2c_start(uint8_t address)
+i2c_status_t i2c_start(uint8_t address)
 {
   i2c_address = address;
   i2cStart(&I2C_DRIVER, &i2cconfig);
-  return 0;
+  return I2C_STATUS_SUCCESS;
 }
 
-uint8_t i2c_transmit(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
+i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout)
 {
-  msg_t status = MSG_OK;
-
   i2c_address = address;
   i2cStart(&I2C_DRIVER, &i2cconfig);
   i2cAcquireBus(&I2C_DRIVER);
-  status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
+  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, 0, 0, MS2ST(timeout));
   i2cReleaseBus(&I2C_DRIVER);
-  return status;
+  return chibios_to_qmk(&status);
 }
 
-uint8_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
+i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_address = address;
   i2cStart(&I2C_DRIVER, &i2cconfig);
-  return i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
+  msg_t status = i2cMasterReceiveTimeout(&I2C_DRIVER, (i2c_address >> 1), data, length, MS2ST(timeout));
+  return chibios_to_qmk(&status);
 }
 
-uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_address = devaddr;
   i2cStart(&I2C_DRIVER, &i2cconfig);
@@ -98,19 +106,19 @@ uint8_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t l
   }
   complete_packet[0] = regaddr;
 
-  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
+  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 1, 0, 0, MS2ST(timeout));
+  return chibios_to_qmk(&status);
 }
 
-uint8_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
+i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t* regaddr, uint8_t* data, uint16_t length, uint16_t timeout)
 {
   i2c_address = devaddr;
   i2cStart(&I2C_DRIVER, &i2cconfig);
-  return i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
+  msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), regaddr, 1, data, length, MS2ST(timeout));
+  return chibios_to_qmk(&status);
 }
 
-// This is usually not needed. It releases the driver to allow pins to become GPIO again.
-uint8_t i2c_stop(void)
+void i2c_stop(void)
 {
   i2cStop(&I2C_DRIVER);
-  return 0;
 }