diff options
Diffstat (limited to 'keyboards/clueboard/66_hotswap')
17 files changed, 2099 insertions, 143 deletions
diff --git a/keyboards/clueboard/66_hotswap/66_hotswap.h b/keyboards/clueboard/66_hotswap/66_hotswap.h index 9367c2633..a1ea44841 100644 --- a/keyboards/clueboard/66_hotswap/66_hotswap.h +++ b/keyboards/clueboard/66_hotswap/66_hotswap.h @@ -3,3 +3,7 @@ #ifdef KEYBOARD_clueboard_66_hotswap_gen1 #include "gen1.h" #endif + +#ifdef KEYBOARD_clueboard_66_hotswap_prototype + #include "prototype.h" +#endif diff --git a/keyboards/clueboard/66_hotswap/config.h b/keyboards/clueboard/66_hotswap/config.h index 88adb5737..2c265c947 100644 --- a/keyboards/clueboard/66_hotswap/config.h +++ b/keyboards/clueboard/66_hotswap/config.h @@ -16,7 +16,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once - #include "config_common.h" /* USB Device descriptor parameter */ diff --git a/keyboards/clueboard/66_hotswap/gen1/chconf.h b/keyboards/clueboard/66_hotswap/gen1/chconf.h new file mode 100644 index 000000000..1d9f12ff1 --- /dev/null +++ b/keyboards/clueboard/66_hotswap/gen1/chconf.h @@ -0,0 +1,520 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 100000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM TRUE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY TRUE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/clueboard/66_hotswap/gen1/config.h b/keyboards/clueboard/66_hotswap/gen1/config.h index d5d36d4a1..6b0cfb60b 100644 --- a/keyboards/clueboard/66_hotswap/gen1/config.h +++ b/keyboards/clueboard/66_hotswap/gen1/config.h @@ -1,44 +1,146 @@ -#pragma once +/* + * Copyright 2017 skully <skullydazed@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once #include "config_common.h" -#define PRODUCT_ID 0x2390 +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC1ED +#define PRODUCT_ID 0x2391 #define DEVICE_VER 0x0001 +#define MANUFACTURER Clueboard + +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800 /* key matrix size */ #define MATRIX_ROWS 10 #define MATRIX_COLS 8 -/* ROWS: Top to bottom, COLS: Left to right +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * */ -#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } -#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } -#define UNUSED_PINS +#define MATRIX_ROW_PINS { B11, A6, A3, A2, A1, B5, B6, C15, C14, C13 } +#define MATRIX_COL_PINS { B10, B2, B1, B0, A7, B4, B3, B7 } +#define UNUSED_PINS { A0, A8, A15, B12, B13, B14, B15 } +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 6 -/* Speaker configuration +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * */ -#define B7_AUDIO -#define NO_MUSIC_MODE -#define AUDIO_CLICKY +//#define FORCE_NKRO + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) -/* Backlight configuration +/* + * Feature disable options + * These options are also useful to firmware size reduction. */ -#define BACKLIGHT_LEVELS 1 -/* Underlight configuration +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options */ -#define RGB_DI_PIN D7 -#define RGBLED_NUM 26 // Number of LEDs -#define RGBLIGHT_HUE_STEP 32 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 - -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_EFFECT_BREATHE_CENTER 1 -#define RGBLIGHT_EFFECT_BREATHE_MAX 200 -#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2 -#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1 -#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 4 // How many LEDs wide to light up -#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 16 // The led to start at -#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8 // How many LEDs to travel -#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // How many LEDs wide to light up + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + + /* Backlight configuration + */ +#define BACKLIGHT_LEVELS 10 + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 0b1110100 AD <-> GND +// 0b1110111 AD <-> VCC +// 0b1110101 AD <-> SCL +// 0b1110110 AD <-> SDA +#define LED_DRIVER_ADDR_1 0b1110100 +#define I2C1_BANK GPIOB +#define I2C1_SCL 8 +#define I2C1_SDA 9 + +#define LED_DRIVER_COUNT 1 +#define LED_DRIVER_LED_COUNT 71 diff --git a/keyboards/clueboard/66_hotswap/gen1/gen1.c b/keyboards/clueboard/66_hotswap/gen1/gen1.c index 01f74bc50..c70f22375 100644 --- a/keyboards/clueboard/66_hotswap/gen1/gen1.c +++ b/keyboards/clueboard/66_hotswap/gen1/gen1.c @@ -1,63 +1,186 @@ +/* Copyright 2017 Clueboard <info@clueboard.co> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #include "gen1.h" -#include <avr/io.h> -#include "backlight.h" -#include "print.h" +#include "is31fl3731-simple.h" void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - matrix_init_user(); - led_init_ports(); - - // JTAG disable for PORT F. write JTD bit twice within four cycles. - MCUCR |= (1<<JTD); - MCUCR |= (1<<JTD); } - void matrix_scan_kb(void) { - matrix_scan_user(); } -void backlight_init_ports(void) { - print("init_backlight_pin()\n"); - // Set our LED pins as output - DDRD |= (1<<0); // Esc - DDRD |= (1<<4); // Page Up - DDRD |= (1<<1); // Arrows - - // Set our LED pins low - PORTD &= ~(1<<0); // Esc - PORTD &= ~(1<<4); // Page Up - PORTD &= ~(1<<1); // Arrows -} +#ifdef LED_MATRIX_ENABLE +const is31_led g_is31_leds[LED_DRIVER_LED_COUNT] = { +/* Refer to IS31 manual for these locations + * driver + * | LED address + * | | */ + {0, C1_1}, // k00 KC_GESC + {0, C1_2}, // k01 KC_1 + {0, C1_3}, // k02 KC_2 + {0, C1_4}, // k03 KC_3 + {0, C1_5}, // k04 KC_4 + {0, C1_6}, // k05 KC_5 + {0, C1_7}, // k06 KC_6 + {0, C1_8}, // k07 KC_7 + {0, C1_9}, // k50 KC_8 + {0, C1_10}, // k51 KC_9 + {0, C1_11}, // k52 KC_0 + {0, C1_12}, // k53 KC_MINS + {0, C1_13}, // k54 KC_EQL + {0, C1_14}, // k55 KC_BSPC + {0, C1_15}, // k57 KC_PGUP + {0, C2_1}, // k10 KC_TAB + {0, C2_2}, // k11 KC_Q + {0, C2_3}, // k12 KC_W + {0, C2_4}, // k13 KC_E + {0, C2_5}, // k14 KC_R + {0, C2_6}, // k15 KC_T + {0, C2_7}, // k16 KC_Y + {0, C2_8}, // k17 KC_U + {0, C2_9}, // k60 KC_I + {0, C2_10}, // k61 KC_O + {0, C2_11}, // k62 KC_P + {0, C2_12}, // k63 KC_LBRC + {0, C2_13}, // k64 KC_RBRC + {0, C2_14}, // k65 KC_BSLS + {0, C2_15}, // k67 KC_PGDN + {0, C3_1}, // k20 KC_CAPS + {0, C3_2}, // k21 KC_A + {0, C3_3}, // k22 KC_S + {0, C3_4}, // k23 KC_D + {0, C3_5}, // k24 KC_F + {0, C3_6}, // k25 KC_G + {0, C3_7}, // k26 KC_H + {0, C3_8}, // k27 KC_J + {0, C3_9}, // k70 KC_K + {0, C3_10}, // k71 KC_L + {0, C3_11}, // k72 KC_SCLN + {0, C3_12}, // k73 KC_QUOT + {0, C3_14}, // k75 KC_ENT + {0, C4_1}, // k30 KC_LSFT + {0, C4_3}, // k32 KC_Z + {0, C4_4}, // k33 KC_X + {0, C4_5}, // k34 KC_C + {0, C4_6}, // k35 KC_V + {0, C4_7}, // k36 KC_B + {0, C4_8}, // k37 KC_N + {0, C4_9}, // k80 KC_M + {0, C4_10}, // k81 KC_COMM + {0, C4_11}, // k82 KC_DOT + {0, C4_12}, // k83 KC_SLSH + {0, C4_13}, // k85 KC_RSFT + {0, C4_14}, // k86 KC_UP + {0, C5_1}, // k40 KC_LCTL + {0, C5_2}, // k41 KC_LGUI + {0, C5_3}, // k42 KC_LALT + {0, C5_4}, // Unassociated between LALT and SPACE_2.75 + {0, C5_5}, // k45 KC_SPC SPACE_2.75 + {0, C5_6}, // k45 KC_SPC SPACE_6.75 + {0, C5_7}, // k46 KC_SPC SPACE_2.25 + {0, C5_8}, // Unassociated between SPACE_2.25 and SPACE_1.25 + {0, C5_9}, // k90 KC_RGUI + {0, C5_10}, // k92 KC_RALT + {0, C5_11}, // k93 MO(_FL) + {0, C5_12}, // k94 KC_RCTL + {0, C5_13}, // k95 KC_LEFT + {0, C5_14}, // k96 KC_DOWN + {0, C5_15} // k97 KC_RGHT +}; -void backlight_set(uint8_t level) { - if ( level == 0 ) { - // Turn off light - PORTD |= (1<<0); // Esc - PORTD |= (1<<4); // Page Up - PORTD |= (1<<1); // Arrows - } else { - // Turn on light - PORTD &= ~(1<<0); // Esc - PORTD &= ~(1<<4); // Page Up - PORTD &= ~(1<<1); // Arrows - } -} +const led_matrix g_leds[LED_DRIVER_LED_COUNT] = { -void led_init_ports() { - // * Set our LED pins as output - DDRB |= (1<<4); -} + /*{row | col << 4} + | LED_ROW_COL(row, col) + | | modifier + | | | */ + {{0|(1<<4)}, {0, 0}, 1}, // k00 KC_GESC + {{0|(2<<4)}, {14.45, 0}, 0}, // k01 KC_1 + {{0|(3<<4)}, {28.9, 0}, 0}, // k02 KC_2 + {{0|(4<<4)}, {43.35, 0}, 0}, // k03 KC_3 + {{0|(5<<4)}, {57.8, 0}, 0}, // k04 KC_4 + {{0|(6<<4)}, {72.25, 0}, 0}, // k05 KC_5 + {{0|(7<<4)}, {86.7, 0}, 0}, // k06 KC_6 + {{0|(8<<4)}, {101.2, 0}, 0}, // k07 KC_7 + {{0|(9<<4)}, {115.6, 0}, 0}, // k50 KC_8 + {{0|(10<<4)}, {130, 0}, 0}, // k51 KC_9 + {{0|(11<<4)}, {144.5, 0}, 0}, // k52 KC_0 + {{0|(12<<4)}, {159, 0}, 0}, // k53 KC_MINS + {{0|(13<<4)}, {173.4, 0}, 0}, // k54 KC_EQL + {{0|(14<<4)}, {195.1, 0}, 1}, // k55 KC_BSPC + {{0|(15<<4)}, {224, 0}, 1}, // k57 KC_PGUP -void led_set_kb(uint8_t usb_led) { - DDRB |= (1<<4); - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // Turn capslock on - PORTB |= (1<<4); - } else { - // Turn capslock off - PORTB &= ~(1<<4); - } -} + {{1|(0<<4)}, {3.6125, 16}, 1}, // k10 KC_TAB + {{1|(1<<4)}, {21.675, 16}, 0}, // k11 KC_Q + {{1|(2<<4)}, {36.125, 16}, 0}, // k12 KC_W + {{1|(3<<4)}, {50.575, 16}, 0}, // k13 KC_E + {{1|(4<<4)}, {65.025, 16}, 0}, // k14 KC_R + {{1|(5<<4)}, {79.475, 16}, 0}, // k15 KC_T + {{1|(6<<4)}, {93.925, 16}, 0}, // k16 KC_Y + {{1|(7<<4)}, {108.375, 16}, 0}, // k17 KC_U + {{1|(8<<4)}, {122.825, 16}, 0}, // k60 KC_I + {{1|(9<<4)}, {137.275, 16}, 0}, // k61 KC_O + {{1|(10<<4)}, {151.725, 16}, 0}, // k62 KC_P + {{1|(11<<4)}, {166.175, 16}, 0}, // k63 KC_LBRC + {{1|(12<<4)}, {180.625, 16}, 0}, // k64 KC_RBRC + {{1|(13<<4)}, {198.6875, 16}, 1}, // k65 KC_BSLS + {{1|(14<<4)}, {224, 16}, 1}, // k67 KC_PGDN + + {{2|(0<<4)}, {5.41875, 32}, 1}, // k20 KC_CAPS + {{2|(1<<4)}, {25.2875, 32}, 0}, // k21 KC_A + {{2|(2<<4)}, {39.7375, 32}, 0}, // k22 KC_S + {{2|(3<<4)}, {54.1875, 32}, 0}, // k23 KC_D + {{2|(4<<4)}, {68.6375, 32}, 0}, // k24 KC_F + {{2|(5<<4)}, {83.0875, 32}, 0}, // k25 KC_G + {{2|(6<<4)}, {97.5375, 32}, 0}, // k26 KC_H + {{2|(7<<4)}, {111.9875, 32}, 0}, // k27 KC_J + {{2|(8<<4)}, {126.4375, 32}, 0}, // k70 KC_K + {{2|(9<<4)}, {140.8875, 32}, 0}, // k71 KC_L + {{2|(10<<4)}, {155.3375, 32}, 0}, // k72 KC_SCLN + {{2|(11<<4)}, {169.7875, 32}, 0}, // k73 KC_QUOT + {{2|(12<<4)}, {184.2375, 32}, 1}, // k75 KC_ENT + + {{3|(0<<4)}, {16.25625, 48}, 1}, // k30 KC_LSFT + {{3|(1<<4)}, {32.5125, 48}, 0}, // k32 KC_Z + {{3|(2<<4)}, {46.9625, 48}, 0}, // k33 KC_X + {{3|(3<<4)}, {61.4125, 48}, 0}, // k34 KC_C + {{3|(4<<4)}, {75.8625, 48}, 0}, // k35 KC_V + {{3|(5<<4)}, {90.3125, 48}, 0}, // k36 KC_B + {{3|(6<<4)}, {104.7625, 48}, 0}, // k37 KC_N + {{3|(7<<4)}, {119.2125, 48}, 0}, // k80 KC_M + {{3|(8<<4)}, {133.6625, 48}, 0}, // k81 KC_COMM + {{3|(9<<4)}, {148.1125, 48}, 0}, // k82 KC_DOT + {{3|(10<<4)}, {162.5625, 48}, 0}, // k83 KC_SLSH + {{3|(11<<4)}, {187.85, 48}, 1}, // k85 KC_RSFT + {{3|(12<<4)}, {209.525, 48}, 1}, // k86 KC_UP + + {{4|(0<<4)}, {9.03125, 64}, 1}, // k40 KC_LCTL + {{4|(1<<4)}, {27.09375, 64}, 1}, // k41 KC_LGUI + {{4|(2<<4)}, {45.15625, 64}, 1}, // k42 KC_LALT + {{4|(3<<4)}, {59.45, 64}, 1}, // Unassociated between LALT and SPACE_2.75 + {{4|(4<<4)}, {73.9, 64}, 1}, // k45 KC_SPC SPACE_2.75 + {{4|(5<<4)}, {88.35, 64}, 1}, // k45 KC_SPC SPACE_6.25 + {{4|(6<<4)}, {102.8, 64}, 1}, // k46 KC_SPC SPACE_2.25 + {{4|(7<<4)}, {117.40625, 64}, 1}, // Unassociated between SPACE_2.25 and SPACE_2.75 + {{4|(8<<4)}, {135.46875, 64}, 1}, // k90 KC_RGUI + {{4|(9<<4)}, {153.53125, 64}, 1}, // k92 KC_RALT + {{4|(10<<4)}, {167.98125, 64}, 1}, // k93 MO(_FL) + {{4|(11<<4)}, {186.04375, 64}, 1}, // k94 KC_RCTL + {{4|(12<<4)}, {195.075, 64}, 1}, // k95 KC_LEFT + {{4|(13<<4)}, {209.525, 64}, 1}, // k96 KC_DOWN + {{4|(14<<4)}, {224, 64}, 1} // k97 KC_RGHT +}; +#endif diff --git a/keyboards/clueboard/66_hotswap/gen1/gen1.h b/keyboards/clueboard/66_hotswap/gen1/gen1.h index e71994f9c..05adf4983 100644 --- a/keyboards/clueboard/66_hotswap/gen1/gen1.h +++ b/keyboards/clueboard/66_hotswap/gen1/gen1.h @@ -1,67 +1,89 @@ +/* Copyright 2017 Clueboard <info@clueboard.co> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ #pragma once #include "quantum.h" +/* + * These are shortcuts to help you work with the various layout options. If your + * keymap works with one of the LAYOUT_...() macros you are encouraged to use that + * and to contribute your keymap to the corresponding layout in + * `qmk_firmware/layouts/community`. + */ + /* Clueboard matrix layout * ,-----------------------------------------------------------. ,---. - * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 56| | 57| + * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 56 | | 57| * |-----------------------------------------------------------| |---| * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| * |-----------------------------------------------------------| `---' * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 75| - * |-------------------------------------------------------------. - * | 30| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 85| 86| - * |-----------------------------------------------------------------. - * | 40| 41| 42| 45| 46| 90| 92| 93| 94| 95| 96| 97| - * `-----------------------------------------------------------------' + * |--------------------------------------------------------------. + * | 30 | 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 85 |86| + * |------------------------------------------------------------------. + * | 40| 41| 42| 45| 46| 90| 92| 93| 94| 95|96| 97| + * `------------------------------------------------------------------' * ,-----------------------------------------------------------. ,---. * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins| * |-----------------------------------------------------------| |---| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| * |-----------------------------------------------------------| `---' * |Caps | A| S| D| F| G| H| J| k| L| ;| '|Enter | - * |-------------------------------------------------------------. - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Up | - * |-----------------------------------------------------------------. - * |Ctrl|Alt |Gui | Space| Space|Gui |Alt |Fn |Ctrl|Lft|Dwn|Rgt| - * `-----------------------------------------------------------------' + * |--------------------------------------------------------------. + * |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift| Up| + * |------------------------------------------------------------------. + * |Ctrl|Alt|Gui | Space| Space|Gui |Alt |Fn |Ctrl|Left|Down|Rgt| + * `------------------------------------------------------------------' */ // The first section contains all of the arguments // The second converts the arguments into a two-dimensional array #define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ + k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k57, \ + k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ + k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ + k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ + k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ ) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \ + { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \ + { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ + { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ + { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ + { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ } #define LAYOUT_66_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ - k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ - k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ - k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ - k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ + k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k55, k57, \ + k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ + k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ + k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ + k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ ) { \ - { k00, k01, k02, k03, k04, k05, k06, k07 }, \ - { k10, k11, k12, k13, k14, k15, k16, k17 }, \ - { k20, k21, k22, k23, k24, k25, k26, k27 }, \ - { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ - { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ - { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ - { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ - { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ - { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ + { k50, k51, k52, k53, k54, k55, KC_NO, k57 }, \ + { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ + { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ + { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ + { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ } diff --git a/keyboards/clueboard/66_hotswap/gen1/halconf.h b/keyboards/clueboard/66_hotswap/gen1/halconf.h new file mode 100644 index 000000000..eda293c49 --- /dev/null +++ b/keyboards/clueboard/66_hotswap/gen1/halconf.h @@ -0,0 +1,388 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC TRUE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the QSPI subsystem. + */ +#if !defined(HAL_USE_QSPI) || defined(__DOXYGEN__) +#define HAL_USE_QSPI FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/clueboard/66_hotswap/gen1/info.json b/keyboards/clueboard/66_hotswap/gen1/info.json new file mode 100644 index 000000000..bab110f3d --- /dev/null +++ b/keyboards/clueboard/66_hotswap/gen1/info.json @@ -0,0 +1,11 @@ +{ + "layouts": { + "LAYOUT": { + "layout": [{"x": 0, "y": 0, "w": 1, "label": "GRAVE"}, {"x": 1, "y": 0, "w": 1, "label": "1"}, {"x": 2, "y": 0, "w": 1, "label": "2"}, {"x": 3, "y": 0, "w": 1, "label": "3"}, {"x": 4, "y": 0, "w": 1, "label": "4"}, {"x": 5, "y": 0, "w": 1, "label": "5"}, {"x": 6, "y": 0, "w": 1, "label": "6"}, {"x": 7, "y": 0, "w": 1, "label": "7"}, {"x": 8, "y": 0, "w": 1, "label": "8"}, {"x": 9, "y": 0, "w": 1, "label": "9"}, {"x": 10, "y": 0, "w": 1, "label": "0"}, {"x": 11, "y": 0, "w": 1, "label": "DASH"}, {"x": 12, "y": 0, "w": 1, "label": "EQUALSIGN"}, {"x": 13, "y": 0, "w": 1, "label": "YEN"}, {"x": 14, "y": 0, "w": 1, "label": "BACKSPACE"}, {"x": 15.5, "y": 0, "w": 1, "label": "PAGEUP"}, {"x": 0, "y": 1, "w": 1.5, "label": "TAB"}, {"x": 1.5, "y": 1, "w": 1, "label": "Q"}, {"x": 2.5, "y": 1, "w": 1, "label": "W"}, {"x": 3.5, "y": 1, "w": 1, "label": "E"}, {"x": 4.5, "y": 1, "w": 1, "label": "R"}, {"x": 5.5, "y": 1, "w": 1, "label": "T"}, {"x": 6.5, "y": 1, "w": 1, "label": "Y"}, {"x": 7.5, "y": 1, "w": 1, "label": "U"}, {"x": 8.5, "y": 1, "w": 1, "label": "I"}, {"x": 9.5, "y": 1, "w": 1, "label": "O"}, {"x": 10.5, "y": 1, "w": 1, "label": "P"}, {"x": 11.5, "y": 1, "w": 1, "label": "LBRACKET"}, {"x": 12.5, "y": 1, "w": 1, "label": "RBRACKET"}, {"x": 13.5, "y": 1, "w": 1.5, "label": "BACKSLASH"}, {"x": 15.5, "y": 1, "w": 1, "label": "PAGEDOWN"}, {"x": 0, "y": 2, "w": 1.75, "label": "CAPSLOCK"}, {"x": 1.75, "y": 2, "w": 1, "label": "A"}, {"x": 2.75, "y": 2, "w": 1, "label": "S"}, {"x": 3.75, "y": 2, "w": 1, "label": "D"}, {"x": 4.75, "y": 2, "w": 1, "label": "F"}, {"x": 5.75, "y": 2, "w": 1, "label": "G"}, {"x": 6.75, "y": 2, "w": 1, "label": "H"}, {"x": 7.75, "y": 2, "w": 1, "label": "J"}, {"x": 8.75, "y": 2, "w": 1, "label": "K"}, {"x": 9.75, "y": 2, "w": 1, "label": "L"}, {"x": 10.75, "y": 2, "w": 1, "label": "SEMICOLON"}, {"x": 11.75, "y": 2, "w": 1, "label": "QUOTE"}, {"x": 13.75, "y": 2, "w": 1.25, "label": "ENTER"}, {"x": 0, "y": 3, "w": 1.25, "label": "LSHIFT"}, {"x": 2.25, "y": 3, "w": 1, "label": "Z"}, {"x": 3.25, "y": 3, "w": 1, "label": "X"}, {"x": 4.25, "y": 3, "w": 1, "label": "C"}, {"x": 5.25, "y": 3, "w": 1, "label": "V"}, {"x": 6.25, "y": 3, "w": 1, "label": "B"}, {"x": 7.25, "y": 3, "w": 1, "label": "N"}, {"x": 8.25, "y": 3, "w": 1, "label": "M"}, {"x": 9.25, "y": 3, "w": 1, "label": "COMMA"}, {"x": 10.25, "y": 3, "w": 1, "label": "PERIOD"}, {"x": 11.25, "y": 3, "w": 1, "label": "SLASH"}, {"x": 13.25, "y": 3, "w": 1.25, "label": "RSHIFT"}, {"x": 14.5, "y": 3, "w": 1, "label": "UP"}, {"x": 0, "y": 4, "w": 1.25, "label": "LCTRL"}, {"x": 1.25, "y": 4, "w": 1, "label": "LALT"}, {"x": 2.25, "y": 4, "w": 1.25, "label": "LCMD"}, {"x": 3.5, "y": 4, "w": 1.25, "label": "MUHENKAN"}, {"x": 4.75, "y": 4, "w": 2, "label": "SPACE1"}, {"x": 6.75, "y": 4, "w": 2, "label": "SPACE2"}, {"x": 8.75, "y": 4, "w": 1.25, "label": "HENKAN"}, {"x": 10, "y": 4, "w": 1.25, "label": "RCMD"}, {"x": 11.25, "y": 4, "w": 1, "label": "RCTRL"}, {"x": 12.25, "y": 4, "w": 1.25, "label": "FN"}, {"x": 13.5, "y": 4, "w": 1, "label": "LEFT"}, {"x": 14.5, "y": 4, "w": 1, "label": "DOWN"}, {"x": 15.5, "y": 4, "w": 1, "label": "RIGHT"}] + }, + + "LAYOUT_66_ansi": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"x":15.5, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"x":15.5, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"x":14.5, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4}, {"label":"Menu", "x":12.25, "y":4, "w":1.25}, {"x":13.5, "y":4}, {"x":14.5, "y":4}, {"x":15.5, "y":4}] + } + } +} diff --git a/keyboards/clueboard/66_hotswap/gen1/led.c b/keyboards/clueboard/66_hotswap/gen1/led.c new file mode 100644 index 000000000..efbf53202 --- /dev/null +++ b/keyboards/clueboard/66_hotswap/gen1/led.c @@ -0,0 +1,21 @@ +/* + * Copyright 2017 skully <skullydazed@gmail.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "hal.h" +#include "backlight.h" +#include "led.h" +#include "printf.h" diff --git a/keyboards/clueboard/66_hotswap/gen1/matrix.c b/keyboards/clueboard/66_hotswap/gen1/matrix.c new file mode 100644 index 000000000..c3e59b564 --- /dev/null +++ b/keyboards/clueboard/66_hotswap/gen1/matrix.c @@ -0,0 +1,160 @@ +#include <stdint.h> +#include <stdbool.h> +#include <string.h> +#include "hal.h" +#include "timer.h" +#include "wait.h" +#include "printf.h" +#include "backlight.h" +#include "matrix.h" +#include "action.h" +#include "keycode.h" +#include <string.h> + +/* + * #define MATRIX_ROW_PINS { PB11, PA6, PA3, PA2, PA1, PB5, PB6, PC15, PC14, PC13 } + * #define MATRIX_COL_PINS { PB10, PB2, PB1, PB0, PA7, PB4, PB3, PB7 } + */ +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_COLS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; + +__attribute__ ((weak)) +void matrix_init_user(void) {} + +__attribute__ ((weak)) +void matrix_scan_user(void) {} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +void matrix_init(void) { + printf("matrix init\n"); + //debug_matrix = true; + + // actual matrix setup + palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 4, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 7, PAL_MODE_OUTPUT_PUSHPULL); + + palSetPadMode(GPIOB, 11, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 6, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 1, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOB, 5, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOB, 6, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 13, PAL_MODE_INPUT_PULLDOWN); + + memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t)); + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + // actual matrix + for (int col = 0; col < MATRIX_COLS; col++) { + matrix_row_t data = 0; + + // strobe col { PB10, PB2, PB1, PB0, PA7, PB4, PB3, PB7 } + switch (col) { + case 0: palSetPad(GPIOB, 10); break; + case 1: palSetPad(GPIOB, 2); break; + case 2: palSetPad(GPIOB, 1); break; + case 3: palSetPad(GPIOB, 0); break; + case 4: palSetPad(GPIOA, 7); break; + case 5: palSetPad(GPIOB, 4); break; + case 6: palSetPad(GPIOB, 3); break; + case 7: palSetPad(GPIOB, 7); break; + } + + // need wait to settle pin state + wait_us(20); + + // read row data { PB11, PA6, PA3, PA2, PA1, PB5, PB6, PC15, PC14, PC13 } + data = ( + (palReadPad(GPIOB, 11) << 0 ) | + (palReadPad(GPIOA, 6) << 1 ) | + (palReadPad(GPIOA, 3) << 2 ) | + (palReadPad(GPIOA, 2) << 3 ) | + (palReadPad(GPIOA, 1) << 4 ) | + (palReadPad(GPIOB, 5) << 5 ) | + (palReadPad(GPIOB, 6) << 6 ) | + (palReadPad(GPIOC, 15) << 7 ) | + (palReadPad(GPIOC, 14) << 8 ) | + (palReadPad(GPIOC, 13) << 9 ) + ); + + // unstrobe col { B11, B10, B2, B1, A7, B0 } + switch (col) { + case 0: palClearPad(GPIOB, 10); break; + case 1: palClearPad(GPIOB, 2); break; + case 2: palClearPad(GPIOB, 1); break; + case 3: palClearPad(GPIOB, 0); break; + case 4: palClearPad(GPIOA, 7); break; + case 5: palClearPad(GPIOB, 4); break; + case 6: palClearPad(GPIOB, 3); break; + case 7: palClearPad(GPIOB, 7); break; + } + + if (matrix_debouncing[col] != data) { + matrix_debouncing[col] = data; + debouncing = true; + debouncing_time = timer_read(); + } + } + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix[row] = 0; + for (int col = 0; col < MATRIX_COLS; col++) { + matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col); + } + } + debouncing = false; + } + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_on(uint8_t row, uint8_t col) { + return (matrix[row] & (1<<col)); +} + +matrix_row_t matrix_get_row(uint16_t row) { + return matrix[row]; +} + +void matrix_print(void) { + printf("\nr/c 01234567\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + printf("%X0: ", row); + matrix_row_t data = matrix_get_row(row); + for (int col = 0; col < MATRIX_COLS; col++) { + if (data & (1<<col)) + printf("1"); + else + printf("0"); + } + printf("\n"); + } +} diff --git a/keyboards/clueboard/66_hotswap/gen1/mcuconf.h b/keyboards/clueboard/66_hotswap/gen1/mcuconf.h new file mode 100644 index 000000000..226da48d5 --- /dev/null +++ b/keyboards/clueboard/66_hotswap/gen1/mcuconf.h @@ -0,0 +1,257 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F3xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F3xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 9 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADC12PRES STM32_ADC12PRES_DIV1 +#define STM32_ADC34PRES STM32_ADC34PRES_DIV1 +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_USART2SW STM32_USART2SW_PCLK +#define STM32_USART3SW STM32_USART3SW_PCLK +#define STM32_UART4SW STM32_UART4SW_PCLK +#define STM32_UART5SW STM32_UART5SW_PCLK +#define STM32_I2C1SW STM32_I2C1SW_SYSCLK +#define STM32_I2C2SW STM32_I2C2SW_SYSCLK +#define STM32_TIM1SW STM32_TIM1SW_PCLK2 +#define STM32_TIM8SW STM32_TIM8SW_PCLK2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_USB_CLOCK_REQUIRED TRUE +#define STM32_USBPRE STM32_USBPRE_DIV1P5 + +#undef STM32_HSE_BYPASS +// #error "oh no" +// #endif + +/* + * ADC driver system settings. + */ +#define STM32_ADC_DUAL_MODE FALSE +#define STM32_ADC_COMPACT_SAMPLES FALSE +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_USE_ADC4 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_ADC_ADC4_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_ADC4_DMA_PRIORITY 2 +#define STM32_ADC_ADC12_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_IRQ_PRIORITY 5 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY 5 +#define STM32_ADC_ADC12_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 +#define STM32_ADC_ADC34_CLOCK_MODE ADC_CCR_CKMODE_AHB_DIV1 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 TRUE +#define STM32_DAC_USE_DAC1_CH2 TRUE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI30_32_IRQ_PRIORITY 6 +#define STM32_EXT_EXTI33_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM6 TRUE +#define STM32_GPT_USE_TIM7 TRUE +#define STM32_GPT_USE_TIM8 TRUE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 10 +#define STM32_I2C_I2C2_IRQ_PRIORITY 10 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_HP_IRQ_PRIORITY 13 +#define STM32_USB_USB1_LP_IRQ_PRIORITY 14 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/clueboard/66_hotswap/gen1/rules.mk b/keyboards/clueboard/66_hotswap/gen1/rules.mk index 887592b37..6b1ee92c1 100644 --- a/keyboards/clueboard/66_hotswap/gen1/rules.mk +++ b/keyboards/clueboard/66_hotswap/gen1/rules.mk @@ -1,24 +1,58 @@ -EXTRAFLAGS += -flto -LAYOUTS = 66_ansi -MCU = atmega32u4 -F_CPU = 16000000 -ARCH = AVR8 -F_USB = $(F_CPU) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT -OPT_DEFS += -DBOOTLOADER_SIZE=4096 +# project specific files +SRC = led.c +LAYOUTS += 66_ansi + +## chip/board settings +# - the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F3xx + +# Linker script to use +# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +MCU_LDSCRIPT = STM32F303xC + +# Startup code to use +# - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f3xx + +# Board: it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +BOARD = GENERIC_STM32_F303XC + +# Cortex version +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 + +USE_FPU = yes + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000 +OPT_DEFS = + +# Options to pass to dfu-util when flashing +DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave + +# LED Configuration +LED_MATRIX_ENABLE = IS31FL3731 # Build Options # comment out to disable the options. # BACKLIGHT_ENABLE = yes -BOOTMAGIC_ENABLE = no -MOUSEKEY_ENABLE = no -EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes -COMMAND_ENABLE = no -NKRO_ENABLE = yes +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +#CUSTOM_MATRIX = yes # Custom matrix file AUDIO_ENABLE = yes -RGBLIGHT_ENABLE = yes -MIDI_ENABLE = no -UNICODE_ENABLE = no -BLUETOOTH_ENABLE = no +# SERIAL_LINK_ENABLE = yes diff --git a/keyboards/clueboard/66_hotswap/keymaps/default/keymap.c b/keyboards/clueboard/66_hotswap/keymaps/default/keymap.c index 94f2ec0c4..6451cf037 100644 --- a/keyboards/clueboard/66_hotswap/keymaps/default/keymap.c +++ b/keyboards/clueboard/66_hotswap/keymaps/default/keymap.c @@ -6,6 +6,30 @@ #define _FL 1 #define _CL 2 +enum custom_keycodes { + S_BSKTC = SAFE_RANGE, + S_ODEJY, + S_RCKBY, + S_DOEDR, + S_SCALE, + S_ONEUP, + S_COIN, + S_SONIC, + S_ZELDA +}; + +#ifdef AUDIO_ENABLE + float song_basketcase[][2] = SONG(BASKET_CASE); + float song_ode_to_joy[][2] = SONG(ODE_TO_JOY); + float song_rock_a_bye_baby[][2] = SONG(ROCK_A_BYE_BABY); + float song_doe_a_deer[][2] = SONG(DOE_A_DEER); + float song_scale[][2] = SONG(MUSIC_SCALE_SOUND); + float song_coin[][2] = SONG(COIN_SOUND); + float song_one_up[][2] = SONG(ONE_UP_SOUND); + float song_sonic_ring[][2] = SONG(SONIC_RING); + float song_zelda_puzzle[][2] = SONG(ZELDA_PUZZLE); +#endif + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: Base Layer (Default Layer) */ @@ -28,9 +52,72 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _CL: Control layer */ [_CL] = LAYOUT( - BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, RGB_TOG, RGB_VAI, \ - _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, \ + BL_STEP,S_ONEUP,S_SCALE,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, BL_TOGG, BL_INC, \ + _______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, \ _______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, RGB_SAI, \ - _______,_______,_______, RGB_MOD,RGB_MOD, _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), + _______,_______,_______, BL_BRTG,BL_BRTG, _______,_______,MO(_FL),_______,RGB_HUD,RGB_SAD,RGB_HUI), }; + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + #ifdef AUDIO_ENABLE + case S_BSKTC: + if (record->event.pressed) { + stop_all_notes(); + PLAY_SONG(song_basketcase); + } + return false; + case S_ODEJY: + if (record->event.pressed) { + stop_all_notes(); + PLAY_SONG(song_ode_to_joy); + } + return false; + case S_RCKBY: + if (record->event.pressed) { + stop_all_notes(); + PLAY_SONG(song_rock_a_bye_baby); + } + return false; + case S_DOEDR: + if (record->event.pressed) { + stop_all_notes(); + PLAY_SONG(song_doe_a_deer); + } + return false; + case S_SCALE: + if (record->event.pressed) { + stop_all_notes(); + PLAY_SONG(song_scale); + } + return false; + case S_ONEUP: + if (record->event.pressed) { + stop_all_notes(); + PLAY_SONG(song_one_up); + } + return false; + case S_COIN: + if (record->event.pressed) { + stop_all_notes(); + PLAY_SONG(song_coin); + } + return false; + case S_SONIC: + if (record->event.pressed) { + stop_all_notes(); + PLAY_SONG(song_sonic_ring); + } + return false; + case S_ZELDA: + if (record->event.pressed) { + stop_all_notes(); + PLAY_SONG(song_zelda_puzzle); + } + return false; + #endif + } + return true; +} diff --git a/keyboards/clueboard/66_hotswap/prototype/config.h b/keyboards/clueboard/66_hotswap/prototype/config.h new file mode 100644 index 000000000..7679d08e5 --- /dev/null +++ b/keyboards/clueboard/66_hotswap/prototype/config.h @@ -0,0 +1,55 @@ +#pragma once +#include "config_common.h" + +#define PRODUCT_ID 0x2390 +#define DEVICE_VER 0x0001 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +// ROWS: Top to bottom, COLS: Left to right +/* Row pin configuration +* row: 0 1 2 3 4 5 6 7 8 9 +* pin: B2 C7 C6 B6 B5 B0 B3 D5 D3 D2 +*/ + +#define MATRIX_ROW_PINS { B2, C7, C6, B6, B5, B0, B3, D5, D3, D2 } +/* Column pin configuration + * col: 0 1 2 3 4 5 6 7 + * pin: F0 F1 F4 F5 F6 F7 E6 B1 + */ +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, E6, B1 } +#define UNUSED_PINS + +/* Speaker configuration + */ +#define B7_AUDIO +#define NO_MUSIC_MODE +#define AUDIO_CLICKY + +/* Space savings + */ +#define NO_ACTION_TAPPING + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 1 + +/* Underlight configuration + */ +#define RGB_DI_PIN D7 +#define RGBLED_NUM 26 // Number of LEDs +#define RGBLIGHT_HUE_STEP 32 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_EFFECT_BREATHE_CENTER 1 +#define RGBLIGHT_EFFECT_BREATHE_MAX 200 +#define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 666*2 +#define RGBLIGHT_EFFECT_CHRISTMAS_STEP 1 +#define RGBLIGHT_EFFECT_KNIGHT_LENGTH 4 // How many LEDs wide to light up +#define RGBLIGHT_EFFECT_KNIGHT_OFFSET 16 // The led to start at +#define RGBLIGHT_EFFECT_KNIGHT_LED_NUM 8 // How many LEDs to travel +#define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // How many LEDs wide to light up diff --git a/keyboards/clueboard/66_hotswap/prototype/prototype.c b/keyboards/clueboard/66_hotswap/prototype/prototype.c new file mode 100644 index 000000000..991d4b8fa --- /dev/null +++ b/keyboards/clueboard/66_hotswap/prototype/prototype.c @@ -0,0 +1,63 @@ +#include "prototype.h" +#include <avr/io.h> +#include "backlight.h" +#include "print.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + matrix_init_user(); + led_init_ports(); + + // JTAG disable for PORT F. write JTD bit twice within four cycles. + MCUCR |= (1<<JTD); + MCUCR |= (1<<JTD); +} + + +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +void backlight_init_ports(void) { + print("init_backlight_pin()\n"); + // Set our LED pins as output + DDRD |= (1<<0); // Esc + DDRD |= (1<<4); // Page Up + DDRD |= (1<<1); // Arrows + + // Set our LED pins low + PORTD &= ~(1<<0); // Esc + PORTD &= ~(1<<4); // Page Up + PORTD &= ~(1<<1); // Arrows +} + +void backlight_set(uint8_t level) { + if ( level == 0 ) { + // Turn off light + PORTD |= (1<<0); // Esc + PORTD |= (1<<4); // Page Up + PORTD |= (1<<1); // Arrows + } else { + // Turn on light + PORTD &= ~(1<<0); // Esc + PORTD &= ~(1<<4); // Page Up + PORTD &= ~(1<<1); // Arrows + } +} + +void led_init_ports() { + // * Set our LED pins as output + DDRB |= (1<<4); +} + +void led_set_kb(uint8_t usb_led) { + DDRB |= (1<<4); + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // Turn capslock on + PORTB |= (1<<4); + } else { + // Turn capslock off + PORTB &= ~(1<<4); + } +} diff --git a/keyboards/clueboard/66_hotswap/prototype/prototype.h b/keyboards/clueboard/66_hotswap/prototype/prototype.h new file mode 100644 index 000000000..b1d483b40 --- /dev/null +++ b/keyboards/clueboard/66_hotswap/prototype/prototype.h @@ -0,0 +1,86 @@ +#pragma once +#include "quantum.h" + +/* Clueboard matrix layout + * ,-----------------------------------------------------------. ,---. + * | 00| 01| 02| 03| 04| 05| 06| 07| 50| 51| 52| 53| 54| 56 | | 57| + * |-----------------------------------------------------------| |---| + * | 10| 11| 12| 13| 14| 15| 16| 17| 60| 61| 62| 63| 64| 65| | 67| + * |-----------------------------------------------------------| `---' + * | 20| 21| 22| 23| 24| 25| 26| 27| 70| 71| 72| 73| 74| 75| + * |------------------------------------------------------------. + * | 30| 31| 32| 33| 34| 35| 36| 37| 80| 81| 82| 83| 84| 85|86| + * |------------------------------------------------------------------. + * | 40| 41| 42| 43| 45| 46| 90| 92| 93| 94| 95| 96| 97| + * `------------------------------------------------------------------' + * ,-----------------------------------------------------------. ,---. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins| + * |-----------------------------------------------------------| |---| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del| + * |-----------------------------------------------------------| `---' + * |Caps | A| S| D| F| G| H| J| k| L| ;| '|Enter | + * |--------------------------------------------------------------. + * |Shift| \| Z| X| C| V| B| N| M| ,| .| /| \|Shift| Up| + * |------------------------------------------------------------------. + * |Ctrl|Alt|Gui | Space| Space|Gui |Alt |Fn |Ctrl|Left|Down|Rgt| + * `------------------------------------------------------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ + k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ + k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ + k30, k31, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k84, k85, k86, \ + k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \ + { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ + { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ + { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ + { k80, k81, k82, k83, k84, k85, k86, KC_NO }, \ + { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ +} + +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ + k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ + k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ + k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ + k40, k41, k42, k45, k46, k90, k92, k93, k94, k95, k96, k97 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, KC_NO, KC_NO, k45, k46, KC_NO }, \ + { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ + { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ + { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ + { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ + { k90, KC_NO, k92, k93, k94, k95, k96, k97 } \ +} + +#define LAYOUT_66_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k50, k51, k52, k53, k54, k56, k57, \ + k10, k11, k12, k13, k14, k15, k16, k17, k60, k61, k62, k63, k64, k65, k67, \ + k20, k21, k22, k23, k24, k25, k26, k27, k70, k71, k72, k73, k75, \ + k30, k32, k33, k34, k35, k36, k37, k80, k81, k82, k83, k85, k86, \ + k40, k41, k42, k46, k92, k93, k94, k95, k96, k97 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27 }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37 }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO }, \ + { k50, k51, k52, k53, k54, KC_NO, k56, k57 }, \ + { k60, k61, k62, k63, k64, k65, KC_NO, k67 }, \ + { k70, k71, k72, k73, KC_NO, k75, KC_NO, KC_NO }, \ + { k80, k81, k82, k83, KC_NO, k85, k86, KC_NO }, \ + { KC_NO, KC_NO, k92, k93, k94, k95, k96, k97 } \ +} diff --git a/keyboards/clueboard/66_hotswap/prototype/rules.mk b/keyboards/clueboard/66_hotswap/prototype/rules.mk new file mode 100644 index 000000000..887592b37 --- /dev/null +++ b/keyboards/clueboard/66_hotswap/prototype/rules.mk @@ -0,0 +1,24 @@ +EXTRAFLAGS += -flto +LAYOUTS = 66_ansi +MCU = atmega32u4 +F_CPU = 16000000 +ARCH = AVR8 +F_USB = $(F_CPU) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +# Build Options +# comment out to disable the options. +# +BACKLIGHT_ENABLE = yes +BOOTMAGIC_ENABLE = no +MOUSEKEY_ENABLE = no +EXTRAKEY_ENABLE = yes +CONSOLE_ENABLE = yes +COMMAND_ENABLE = no +NKRO_ENABLE = yes +AUDIO_ENABLE = yes +RGBLIGHT_ENABLE = yes +MIDI_ENABLE = no +UNICODE_ENABLE = no +BLUETOOTH_ENABLE = no |