5 files changed, 30 insertions, 4 deletions
diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile
index 191c6bb66..9b6121e2c 100644
--- a/keyboards/ergodox/ez/Makefile
+++ b/keyboards/ergodox/ez/Makefile
@@ -1,3 +1,8 @@
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+COMMAND_ENABLE   = no  # Commands for debug and configuration
+RGBLIGHT_ENABLE ?= yes
+MIDI_ENABLE ?= yes
+
 ifndef MAKEFILE_INCLUDED
 	include ../../../Makefile
-endif
-\ No newline at end of file
+endif
diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h
index 084a044ee..c2750a321 100644
--- a/keyboards/ergodox/ez/config.h
+++ b/keyboards/ergodox/ez/config.h
@@ -21,6 +21,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #include "../config.h"
 
+#include "config_common.h"
+
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
 #define PRODUCT_ID      0x1307
@@ -39,6 +41,17 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LED_BRIGHTNESS_LO       15
 #define LED_BRIGHTNESS_HI       255
 
+/* ws2812 RGB LED */
+#define RGB_DI_PIN D7
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 15     // Number of LEDs
+#define RGBLIGHT_HUE_STEP 12
+#define RGBLIGHT_SAT_STEP 255
+#define RGBLIGHT_VAL_STEP 12
+
+#define RGB_MIDI
+#define RGBW_BB_TWI
+
 
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5
diff --git a/keyboards/ergodox/ez/ez.c b/keyboards/ergodox/ez/ez.c
index ddb8ff0cf..039e4c6bb 100644
--- a/keyboards/ergodox/ez/ez.c
+++ b/keyboards/ergodox/ez/ez.c
@@ -16,10 +16,10 @@ void matrix_init_kb(void) {
     // unused pins - C7, D4, D5, D7, E6
     // set as input with internal pull-ip enabled
     DDRC  &= ~(1<<7);
-    DDRD  &= ~(1<<7 | 1<<5 | 1<<4);
+    DDRD  &= ~(1<<5 | 1<<4);
     DDRE  &= ~(1<<6);
     PORTC |=  (1<<7);
-    PORTD |=  (1<<7 | 1<<5 | 1<<4);
+    PORTD |=  (1<<5 | 1<<4);
     PORTE |=  (1<<6);
 
     ergodox_blink_all_leds();
@@ -51,6 +51,10 @@ uint8_t init_mcp23018(void) {
     mcp23018_status = 0x20;
 
     // I2C subsystem
+
+    uint8_t sreg_prev;
+    sreg_prev=SREG;
+    cli();
     if (i2c_initialized == 0) {
         i2c_init();  // on pins D(1,0)
         i2c_initialized++;
@@ -79,6 +83,8 @@ uint8_t init_mcp23018(void) {
 out:
     i2c_stop();
 
+    SREG=sreg_prev;
+
     return mcp23018_status;
 }
 
diff --git a/keyboards/ergodox/ez/matrix.c b/keyboards/ergodox/ez/matrix.c
index a19bab90b..43f515259 100644
--- a/keyboards/ergodox/ez/matrix.c
+++ b/keyboards/ergodox/ez/matrix.c
@@ -121,7 +121,7 @@ void matrix_init(void)
     matrix_scan_count = 0;
 #endif
 
-    matrix_init_kb();
+    matrix_init_quantum();
 
 }
 
diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk
index a9715beb8..893cfa7a8 100644
--- a/keyboards/ergodox/ez/rules.mk
+++ b/keyboards/ergodox/ez/rules.mk
@@ -72,6 +72,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 #
 
 SLEEP_LED_ENABLE = no
+API_SYSEX_ENABLE ?= yes
+RGBLIGHT_ENABLE ?= yes
 
 ifndef QUANTUM_DIR
 	include ../../../Makefile