aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox')
-rw-r--r--keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h113
-rw-r--r--keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk2
-rw-r--r--keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c329
-rw-r--r--keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h27
-rw-r--r--keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h39
5 files changed, 0 insertions, 510 deletions
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
deleted file mode 100644
index 9650ffb44..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/board_ST7565.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_BOARD_H
-#define _GDISP_LLD_BOARD_H
-
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6
-#define ST7565_ADC ST7565_ADC_NORMAL
-#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC
-#define ST7565_PAGE_ORDER 0,1,2,3
-/*
- * Custom page order for several LCD boards, e.g. HEM12864-99
- * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3
- */
-
-#define ST7565_GPIOPORT GPIOC
-#define ST7565_PORT PORTC
-#define ST7565_A0_PIN 7
-#define ST7565_RST_PIN 8
-#define ST7565_MOSI_PIN 6
-#define ST7565_SLCK_PIN 5
-#define ST7565_SS_PIN 4
-
-#define palSetPadModeRaw(portname, bits) \
- ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits
-
-#define palSetPadModeNamed(portname, portmode) \
- palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode)
-
-#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2)
-// DSPI Clock and Transfer Attributes
-// Frame Size: 8 bits
-// MSB First
-// CLK Low by default
-static const SPIConfig spi1config = {
- // Operation complete callback or @p NULL.
- .end_cb = NULL,
- //The chip select line port - when not using pcs.
- .ssport = ST7565_GPIOPORT,
- // brief The chip select line pad number - when not using pcs.
- .sspad=ST7565_SS_PIN,
- // SPI initialization data.
- .tar0 =
- SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes
- | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns
- | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns
- | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns
- | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2
- | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns
-};
-
-static GFXINLINE void acquire_bus(GDisplay *g) {
- (void) g;
- // Only the LCD is using the SPI bus, so no need to acquire
- // spiAcquireBus(&SPID1);
- spiSelect(&SPID1);
-}
-
-static GFXINLINE void release_bus(GDisplay *g) {
- (void) g;
- // Only the LCD is using the SPI bus, so no need to release
- //spiReleaseBus(&SPID1);
- spiUnselect(&SPID1);
-}
-
-static GFXINLINE void init_board(GDisplay *g) {
- (void) g;
- palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
- palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL);
- palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- palSetPadModeRaw(MOSI, ST7565_SPI_MODE);
- palSetPadModeRaw(SLCK, ST7565_SPI_MODE);
- palSetPadModeNamed(SS, PAL_MODE_OUTPUT_PUSHPULL);
-
- spiInit();
- spiStart(&SPID1, &spi1config);
- release_bus(g);
-}
-
-static GFXINLINE void post_init_board(GDisplay *g) {
- (void) g;
-}
-
-static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
- (void) g;
- if (state) {
- palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- }
- else {
- palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN);
- }
-}
-
-static GFXINLINE void enter_data_mode(GDisplay *g) {
- palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-static GFXINLINE void enter_cmd_mode(GDisplay *g) {
- palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN);
-}
-
-
-static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
- (void) g;
- spiSend(&SPID1, length, data);
-}
-
-#endif /* _GDISP_LLD_BOARD_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
deleted file mode 100644
index 889a1a031..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/driver.mk
+++ /dev/null
@@ -1,2 +0,0 @@
-GFXINC += drivers/gdisp/st7565ergodox
-GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
deleted file mode 100644
index b04ad0293..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#include "gfx.h"
-
-#if GFX_USE_GDISP
-
-#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX
-#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h"
-#include "src/gdisp/gdisp_driver.h"
-
-#include "board_ST7565.h"
-
-/*===========================================================================*/
-/* Driver local definitions. */
-/*===========================================================================*/
-
-#ifndef GDISP_SCREEN_HEIGHT
-#define GDISP_SCREEN_HEIGHT 32
-#endif
-#ifndef GDISP_SCREEN_WIDTH
-#define GDISP_SCREEN_WIDTH 128
-#endif
-#ifndef GDISP_INITIAL_CONTRAST
-#define GDISP_INITIAL_CONTRAST 35
-#endif
-#ifndef GDISP_INITIAL_BACKLIGHT
-#define GDISP_INITIAL_BACKLIGHT 100
-#endif
-
-#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0)
-
-#include "drivers/gdisp/st7565ergodox/st7565.h"
-
-/*===========================================================================*/
-/* Driver config defaults for backward compatibility. */
-/*===========================================================================*/
-#ifndef ST7565_LCD_BIAS
-#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7
-#endif
-#ifndef ST7565_ADC
-#define ST7565_ADC ST7565_ADC_NORMAL
-#endif
-#ifndef ST7565_COM_SCAN
-#define ST7565_COM_SCAN ST7565_COM_SCAN_INC
-#endif
-#ifndef ST7565_PAGE_ORDER
-#define ST7565_PAGE_ORDER 0,1,2,3
-#endif
-
-/*===========================================================================*/
-/* Driver local functions. */
-/*===========================================================================*/
-
-typedef struct{
- bool_t buffer2;
- uint8_t data_pos;
- uint8_t data[16];
- uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8];
-}PrivData;
-
-// Some common routines and macros
-#define PRIV(g) ((PrivData*)g->priv)
-#define RAM(g) (PRIV(g)->ram)
-
-static GFXINLINE void write_cmd(GDisplay* g, uint8_t cmd) {
- PRIV(g)->data[PRIV(g)->data_pos++] = cmd;
-}
-
-static GFXINLINE void flush_cmd(GDisplay* g) {
- write_data(g, PRIV(g)->data, PRIV(g)->data_pos);
- PRIV(g)->data_pos = 0;
-}
-
-#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); }
-#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); }
-
-// Some common routines and macros
-#define delay(us) gfxSleepMicroseconds(us)
-#define delay_ms(ms) gfxSleepMilliseconds(ms)
-
-#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH)
-#define xybit(y) (1<<((y)&7))
-
-/*===========================================================================*/
-/* Driver exported functions. */
-/*===========================================================================*/
-
-/*
- * As this controller can't update on a pixel boundary we need to maintain the
- * the entire display surface in memory so that we can do the necessary bit
- * operations. Fortunately it is a small display in monochrome.
- * 64 * 128 / 8 = 1024 bytes.
- */
-
-LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
- // The private area is the display surface.
- g->priv = gfxAlloc(sizeof(PrivData));
- PRIV(g)->buffer2 = false;
- PRIV(g)->data_pos = 0;
-
- // Initialise the board interface
- init_board(g);
-
- // Hardware reset
- setpin_reset(g, TRUE);
- gfxSleepMilliseconds(20);
- setpin_reset(g, FALSE);
- gfxSleepMilliseconds(20);
- acquire_bus(g);
- enter_cmd_mode(g);
-
- write_cmd(g, ST7565_RESET);
- write_cmd(g, ST7565_LCD_BIAS);
- write_cmd(g, ST7565_ADC);
- write_cmd(g, ST7565_COM_SCAN);
-
- write_cmd(g, ST7565_RESISTOR_RATIO | 0x1);
- write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST);
-
- // turn on internal power supply (VC=1, VR=1, VF=1)
- write_cmd(g, ST7565_POWER_CONTROL | 0x07);
-
- write_cmd(g, ST7565_INVERT_DISPLAY);
- write_cmd(g, ST7565_ALLON_NORMAL);
-
- write_cmd(g, ST7565_START_LINE | 0);
- write_cmd(g, ST7565_RMW);
- flush_cmd(g);
-
- // Finish Init
- post_init_board(g);
-
- // Release the bus
- release_bus(g);
-
- /* Initialise the GDISP structure */
- g->g.Width = GDISP_SCREEN_WIDTH;
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Orientation = GDISP_ROTATE_0;
- g->g.Powermode = powerOff;
- g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
- g->g.Contrast = GDISP_INITIAL_CONTRAST;
- return TRUE;
-}
-
-#if GDISP_HARDWARE_FLUSH
-LLDSPEC void gdisp_lld_flush(GDisplay *g) {
- unsigned p;
-
- // Don't flush if we don't need it.
- if (!(g->flags & GDISP_FLG_NEEDFLUSH))
- return;
-
- acquire_bus(g);
- enter_cmd_mode(g);
- unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0);
- for (p = 0; p < 4; p++) {
- write_cmd(g, ST7565_PAGE | (p + dstOffset));
- write_cmd(g, ST7565_COLUMN_MSB | 0);
- write_cmd(g, ST7565_COLUMN_LSB | 0);
- write_cmd(g, ST7565_RMW);
- flush_cmd(g);
- enter_data_mode(g);
- write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH);
- enter_cmd_mode(g);
- }
- unsigned line = (PRIV(g)->buffer2 ? 32 : 0);
- write_cmd(g, ST7565_START_LINE | line);
- flush_cmd(g);
- PRIV(g)->buffer2 = !PRIV(g)->buffer2;
- release_bus(g);
-
- g->flags &= ~GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_DRAWPIXEL
-LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_90:
- x = g->p.y;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- break;
- case GDISP_ROTATE_270:
- x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- y = g->p.x;
- break;
- }
- if (gdispColor2Native(g->p.color) != Black)
- RAM(g)[xyaddr(x, y)] |= xybit(y);
- else
- RAM(g)[xyaddr(x, y)] &= ~xybit(y);
- g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-#endif
-
-#if GDISP_HARDWARE_PIXELREAD
-LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) {
- coord_t x, y;
-
- switch(g->g.Orientation) {
- default:
- case GDISP_ROTATE_0:
- x = g->p.x;
- y = g->p.y;
- break;
- case GDISP_ROTATE_90:
- x = g->p.y;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.x;
- break;
- case GDISP_ROTATE_180:
- x = GDISP_SCREEN_WIDTH-1 - g->p.x;
- y = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- break;
- case GDISP_ROTATE_270:
- x = GDISP_SCREEN_HEIGHT-1 - g->p.y;
- y = g->p.x;
- break;
- }
- return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black;
-}
-#endif
-
-LLDSPEC void gdisp_lld_blit_area(GDisplay *g) {
- uint8_t* buffer = (uint8_t*)g->p.ptr;
- int linelength = g->p.cx;
- for (int i = 0; i < g->p.cy; i++) {
- unsigned dstx = g->p.x;
- unsigned dsty = g->p.y + i;
- unsigned srcx = g->p.x1;
- unsigned srcy = g->p.y1 + i;
- unsigned srcbit = srcy * g->p.x2 + srcx;
- for(int j=0; j < linelength; j++) {
- uint8_t src = buffer[srcbit / 8];
- uint8_t bit = 7-(srcbit % 8);
- uint8_t bitset = (src >> bit) & 1;
- uint8_t* dst = &(RAM(g)[xyaddr(dstx, dsty)]);
- if (bitset) {
- *dst |= xybit(dsty);
- }
- else {
- *dst &= ~xybit(dsty);
- }
- dstx++;
- srcbit++;
- }
- }
- g->flags |= GDISP_FLG_NEEDFLUSH;
-}
-
-#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL
-LLDSPEC void gdisp_lld_control(GDisplay *g) {
- switch(g->p.x) {
- case GDISP_CONTROL_POWER:
- if (g->g.Powermode == (powermode_t)g->p.ptr)
- return;
- switch((powermode_t)g->p.ptr) {
- case powerOff:
- case powerSleep:
- case powerDeepSleep:
- acquire_bus(g);
- enter_cmd_mode(g);
- write_cmd(g, ST7565_DISPLAY_OFF);
- flush_cmd(g);
- release_bus(g);
- break;
- case powerOn:
- acquire_bus(g);
- enter_cmd_mode(g);
- write_cmd(g, ST7565_DISPLAY_ON);
- flush_cmd(g);
- release_bus(g);
- break;
- default:
- return;
- }
- g->g.Powermode = (powermode_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_ORIENTATION:
- if (g->g.Orientation == (orientation_t)g->p.ptr)
- return;
- switch((orientation_t)g->p.ptr) {
- /* Rotation is handled by the drawing routines */
- case GDISP_ROTATE_0:
- case GDISP_ROTATE_180:
- g->g.Height = GDISP_SCREEN_HEIGHT;
- g->g.Width = GDISP_SCREEN_WIDTH;
- break;
- case GDISP_ROTATE_90:
- case GDISP_ROTATE_270:
- g->g.Height = GDISP_SCREEN_WIDTH;
- g->g.Width = GDISP_SCREEN_HEIGHT;
- break;
- default:
- return;
- }
- g->g.Orientation = (orientation_t)g->p.ptr;
- return;
-
- case GDISP_CONTROL_CONTRAST:
- g->g.Contrast = (unsigned)g->p.ptr & 63;
- acquire_bus(g);
- enter_cmd_mode(g);
- write_cmd2(g, ST7565_CONTRAST, g->g.Contrast);
- flush_cmd(g);
- release_bus(g);
- return;
- }
-}
-#endif // GDISP_NEED_CONTROL
-
-#endif // GFX_USE_GDISP
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
deleted file mode 100644
index 2b66a877c..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/gdisp_lld_config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _GDISP_LLD_CONFIG_H
-#define _GDISP_LLD_CONFIG_H
-
-#if GFX_USE_GDISP
-
-/*===========================================================================*/
-/* Driver hardware support. */
-/*===========================================================================*/
-
-#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing
-#define GDISP_HARDWARE_DRAWPIXEL TRUE
-#define GDISP_HARDWARE_PIXELREAD TRUE
-#define GDISP_HARDWARE_CONTROL TRUE
-#define GDISP_HARDWARE_BITFILLS TRUE
-
-#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO
-
-#endif /* GFX_USE_GDISP */
-
-#endif /* _GDISP_LLD_CONFIG_H */
diff --git a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
deleted file mode 100644
index 24924ff05..000000000
--- a/keyboards/ergodox/infinity/drivers/gdisp/st7565ergodox/st7565.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * This file is subject to the terms of the GFX License. If a copy of
- * the license was not distributed with this file, you can obtain one at:
- *
- * http://ugfx.org/license.html
- */
-
-#ifndef _ST7565_H
-#define _ST7565_H
-
-#define ST7565_CONTRAST 0x81
-#define ST7565_ALLON_NORMAL 0xA4
-#define ST7565_ALLON 0xA5
-#define ST7565_POSITIVE_DISPLAY 0xA6
-#define ST7565_INVERT_DISPLAY 0xA7
-#define ST7565_DISPLAY_OFF 0xAE
-#define ST7565_DISPLAY_ON 0xAF
-
-#define ST7565_LCD_BIAS_7 0xA3
-#define ST7565_LCD_BIAS_9 0xA2
-
-#define ST7565_ADC_NORMAL 0xA0
-#define ST7565_ADC_REVERSE 0xA1
-
-#define ST7565_COM_SCAN_INC 0xC0
-#define ST7565_COM_SCAN_DEC 0xC8
-
-#define ST7565_START_LINE 0x40
-#define ST7565_PAGE 0xB0
-#define ST7565_COLUMN_MSB 0x10
-#define ST7565_COLUMN_LSB 0x00
-#define ST7565_RMW 0xE0
-
-#define ST7565_RESISTOR_RATIO 0x20
-#define ST7565_POWER_CONTROL 0x28
-
-#define ST7565_RESET 0xE2
-
-#endif /* _ST7565_H */
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-27 20:28:27 +0000