1 files changed, 0 insertions, 85 deletions
diff --git a/keyboards/ergodox_ez/ergodox_ez.c b/keyboards/ergodox_ez/ergodox_ez.c
deleted file mode 100644
index f0558d9f2..000000000
--- a/keyboards/ergodox_ez/ergodox_ez.c
+++ /dev/null
@@ -1,85 +0,0 @@
-#include "ergodox_ez.h"
-#include "i2cmaster.h"
-
-bool i2c_initialized = 0;
-uint8_t mcp23018_status = 0x20;
-
-void matrix_init_kb(void) {
-   // keyboard LEDs (see "PWM on ports OC1(A|B|C)" in "teensy-2-0.md")
-    TCCR1A = 0b10101001;  // set and configure fast PWM
-    TCCR1B = 0b00001001;  // set and configure fast PWM
-
-    // (tied to Vcc for hardware convenience)
-    DDRB  &= ~(1<<4);  // set B(4) as input
-    PORTB &= ~(1<<4);  // set B(4) internal pull-up disabled
-
-    // unused pins - C7, D4, D5, D7, E6
-    // set as input with internal pull-ip enabled
-    DDRC  &= ~(1<<7);
-    DDRD  &= ~(1<<7 | 1<<5 | 1<<4);
-    DDRE  &= ~(1<<6);
-    PORTC |=  (1<<7);
-    PORTD |=  (1<<7 | 1<<5 | 1<<4);
-    PORTE |=  (1<<6);
-
-    ergodox_blink_all_leds();
-
-    matrix_init_user();
-}
-
-void ergodox_blink_all_leds(void)
-{
-    ergodox_led_all_off();
-    ergodox_led_all_set(LED_BRIGHTNESS_HI);
-    ergodox_right_led_1_on();
-    _delay_ms(50);
-    ergodox_right_led_2_on();
-    _delay_ms(50);
-    ergodox_right_led_3_on();
-    _delay_ms(50);
-    ergodox_right_led_1_off();
-    _delay_ms(50);
-    ergodox_right_led_2_off();
-    _delay_ms(50);
-    ergodox_right_led_3_off();
-    //ergodox_led_all_on();
-    //_delay_ms(333);
-    ergodox_led_all_off();
-}
-
-uint8_t init_mcp23018(void) {
-    mcp23018_status = 0x20;
-
-    // I2C subsystem
-    if (i2c_initialized == 0) {
-        i2c_init();  // on pins D(1,0)
-        i2c_initialized++;
-        _delay_ms(1000);
-    }
-
-    // set pin direction
-    // - unused  : input  : 1
-    // - input   : input  : 1
-    // - driving : output : 0
-    mcp23018_status = i2c_start(I2C_ADDR_WRITE);    if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(IODIRA);            if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00000000);        if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00111111);        if (mcp23018_status) goto out;
-    i2c_stop();
-
-    // set pull-up
-    // - unused  : on  : 1
-    // - input   : on  : 1
-    // - driving : off : 0
-    mcp23018_status = i2c_start(I2C_ADDR_WRITE);    if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(GPPUA);             if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00000000);        if (mcp23018_status) goto out;
-    mcp23018_status = i2c_write(0b00111111);        if (mcp23018_status) goto out;
-
-out:
-    i2c_stop();
-
-    return mcp23018_status;
-}
-
-