diff options
Diffstat (limited to 'keyboards/gray_studio/hb85/readme.md')
| -rw-r--r-- | keyboards/gray_studio/hb85/readme.md | 72 |
1 files changed, 30 insertions, 42 deletions
diff --git a/keyboards/gray_studio/hb85/readme.md b/keyboards/gray_studio/hb85/readme.md index 4e93607df..90b4e958c 100644 --- a/keyboards/gray_studio/hb85/readme.md +++ b/keyboards/gray_studio/hb85/readme.md @@ -2,59 +2,47 @@  -A HitBit MSX Computer inspired Keyboard. +A Sony HitBit MSX Computer inspired Keyboard. Keyboard Maintainer: [Felipe Coury](https://github.com/fcoury) Hardware Supported: Gray Studio HB85 -Hardware Availability: Group buy finished +Hardware Availability: [Group buy](https://en.zfrontier.com/products/gray-hb85) finished Make example for this keyboard (after setting up your build environment): - make hb85:default + make gray_studio/hb85:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +Flashing +ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. -ps2avrGB keyboard firmware -========================== +**Reset Key:** To put the HB85 into reset, hold F3 (`K00`) while plugging in. -This keyboard uses the port of the QMK firmware for boards that are based on the -ps2avrGB firmware. +Windows: +1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). +2. Place your keyboard into reset. +3. Press the `Find Device` button and ensure that your keyboard is found. +4. Press the `Open .hex File` button and locate the `.hex` file you created. +5. Press the `Flash Device` button and wait for the process to complete. -Note that this is a complete replacement for the firmware, so you won't be -using Bootmapper Client to change any keyboard settings, since not all the -USB report options are supported. +macOS: +1. Install homebrew by typing the following: + ``` + /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" + ``` +2. Install `crosspack-avr`. + ``` + brew cask install crosspack-avr + ``` +3. Install the following packages: + ``` + brew install python + pip3 install pyusb + brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -## Installing +4. Place your keyboard into reset. +5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. -First, install the requirements. These commands are for OSX, but all you -need is the AVR toolchain and `bootloadHID` for flashing: +**Please Note:** You will need to use the `EEP_RST` keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work. -``` -$ brew cask install crosspack-avr -$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb -$ pip install pyusb -``` - -Then, with the keyboard plugged in, simply run this command from the -`qmk_firmware` directory: - -``` -$ make hb85 -$ bootloadHID -r hb85_default.hex -``` - -## Setting the board to bootloader mode - -Hold the F3 key while plugging the USB cable. - -## Troubleshooting - -From my experience, it's really hard to brick these boards. But these -tricks have been useful when it got stuck in a weird scenario. - -1. Try plugging the board in while holding the bootloader key. This will force - it to boot only the bootloader without loading the firmware. Once this is - done, just reflash the board with the original firmware. -2. Sometimes USB hubs can act weird, so try connecting the board directly - to your computer or plugging/unplugging the USB hub. +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
\ No newline at end of file |