diff options
Diffstat (limited to 'keyboards/handwired/jotpad16')
| -rw-r--r-- | keyboards/handwired/jotpad16/config.h | 38 | ||||
| -rw-r--r-- | keyboards/handwired/jotpad16/jotpad16.c | 6 | ||||
| -rw-r--r-- | keyboards/handwired/jotpad16/jotpad16.h | 18 | ||||
| -rw-r--r-- | keyboards/handwired/jotpad16/keymaps/default/keymap.c | 34 | ||||
| -rw-r--r-- | keyboards/handwired/jotpad16/readme.md | 39 | ||||
| -rw-r--r-- | keyboards/handwired/jotpad16/rules.mk | 66 |
6 files changed, 201 insertions, 0 deletions
diff --git a/keyboards/handwired/jotpad16/config.h b/keyboards/handwired/jotpad16/config.h new file mode 100644 index 000000000..e113597dc --- /dev/null +++ b/keyboards/handwired/jotpad16/config.h @@ -0,0 +1,38 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Jotix +#define PRODUCT JotPad16 +#define DESCRIPTION A Jotantastic compact NumPad + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +/* pro_micro pin-out */ +#define MATRIX_ROW_PINS { B6, B2, D2, D3 } +#define MATRIX_COL_PINS { B5, B4, B3, B1 } +#define UNUSED_PINS + +/* leds */ +#define QMK_LED E6 +#define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_PIN D7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 0 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + diff --git a/keyboards/handwired/jotpad16/jotpad16.c b/keyboards/handwired/jotpad16/jotpad16.c new file mode 100644 index 000000000..512234b91 --- /dev/null +++ b/keyboards/handwired/jotpad16/jotpad16.c @@ -0,0 +1,6 @@ +#include "jotpad16.h" + +void matrix_init_kb(void) { + + matrix_init_user(); +} diff --git a/keyboards/handwired/jotpad16/jotpad16.h b/keyboards/handwired/jotpad16/jotpad16.h new file mode 100644 index 000000000..012c9290d --- /dev/null +++ b/keyboards/handwired/jotpad16/jotpad16.h @@ -0,0 +1,18 @@ +#pragma once + +#include "quantum.h" + +// Used to create a keymap using only KC_ prefixed keys +#define LAYOUT_ortho_4x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, k33 \ +) \ +{ \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, k23 }, \ + { k30, k31, k32, k33 } \ +} + diff --git a/keyboards/handwired/jotpad16/keymaps/default/keymap.c b/keyboards/handwired/jotpad16/keymaps/default/keymap.c new file mode 100644 index 000000000..fb5dc71e2 --- /dev/null +++ b/keyboards/handwired/jotpad16/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _NUMPAD 0 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Numpad + * +-------+-------+-------+-------+ + * | 7 | 8 | 9 | - | + * +-------+-------+-------+-------+ + * | 4 | 5 | 6 | + | + * +-------+-------+-------+-------+ + * | 1 | 2 | 3 | enter | + * +-------+-------+-------+-------+ + * | 0 | . | / | * | + * +-------+-------+-------+-------+ + */ +[_NUMPAD] = LAYOUT_ortho_4x4( + KC_P7, KC_P8, KC_P9, KC_MINS, + KC_P4, KC_P5, KC_P6, KC_PLUS, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_PDOT,KC_PSLS,KC_ASTR +), +}; diff --git a/keyboards/handwired/jotpad16/readme.md b/keyboards/handwired/jotpad16/readme.md new file mode 100644 index 000000000..3d971a515 --- /dev/null +++ b/keyboards/handwired/jotpad16/readme.md @@ -0,0 +1,39 @@ +# JotPad16 + + + +A ortholinear keypad (4x4) made by jotix. + +Keyboard Maintainer: [jotix](https://github.com/jotix) +Hardware Supported: Arduino Pro Micro + +### Arduino Pro Micro Pinout + +| rows | 0 | 1 | 2 | 3 | +|-------------|----|----|-----|-----| +| arduino pin | 10 | 16 | RXI | TX0 | +| qmk pin | B6 | B2 | D2 | D3 | + +| columns | 0 | 1 | 2 | 3 | +|-------------|----|----|----|----| +| arduino pin | 9 | 8 | 14 | 15 | +| qmk pin | B5 | B4 | B3 | C3 | + +| | QMK led | Backlight | +|-------------|-----------|-----------| +| Arduino pin | 7 | 6 | +| qmk pin | E6 | D7 | + +### Compiling the Firmware + +Make example for this keyboard (after setting up your build environment): + + make handwired/jotpad16:default + +### The Default Keymap + + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + + diff --git a/keyboards/handwired/jotpad16/rules.mk b/keyboards/handwired/jotpad16/rules.mk new file mode 100644 index 000000000..8105f800c --- /dev/null +++ b/keyboards/handwired/jotpad16/rules.mk @@ -0,0 +1,66 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +API_SYSEX_ENABLE = no + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +LAYOUTS = ortho_4x4 |