diff options
Diffstat (limited to 'keyboards/handwired/onekey')
4 files changed, 111 insertions, 0 deletions
diff --git a/keyboards/handwired/onekey/keymaps/i2c_scanner/config.h b/keyboards/handwired/onekey/keymaps/i2c_scanner/config.h new file mode 100644 index 000000000..42ab08e36 --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/i2c_scanner/config.h @@ -0,0 +1,6 @@ +#pragma once + +// AVR: can change to other supported values +#define F_SCL 100000UL + +// TODO: add some default ARM configs for i2cv1 and i2cv2 diff --git a/keyboards/handwired/onekey/keymaps/i2c_scanner/keymap.c b/keyboards/handwired/onekey/keymaps/i2c_scanner/keymap.c new file mode 100644 index 000000000..262bd588f --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/i2c_scanner/keymap.c @@ -0,0 +1,66 @@ +#include QMK_KEYBOARD_H + +#include "i2c_master.h" +#include "debug.h" + +#define TIMEOUT 50 + +// TODO: remove patch +#ifdef PROTOCOL_CHIBIOS +# pragma message("ChibiOS is currently 'best effort' and might not report accurate results") + +i2c_status_t i2c_start_bodge(uint8_t address, uint16_t timeout) { + i2c_start(address); + + // except on ChibiOS where the only way is do do "something" + uint8_t data = 0; + return i2c_readReg(address, 0, &data, sizeof(data), TIMEOUT); +} + +# define i2c_start i2c_start_bodge +#endif + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT(KC_A) // +}; + +void do_scan(void) { + uint8_t nDevices = 0; + + dprintf("Scanning...\n"); + + for (uint8_t address = 1; address < 127; address++) { + // The i2c_scanner uses the return value of + // i2c_start to see if a device did acknowledge to the address. + i2c_status_t error = i2c_start(address << 1, TIMEOUT); + if (error == I2C_STATUS_SUCCESS) { + i2c_stop(); + dprintf(" I2C device found at address 0x%02X\n", address); + nDevices++; + } else { + // dprintf(" Unknown error (%u) at address 0x%02X\n", error, address); + } + } + + if (nDevices == 0) + dprintf("No I2C devices found\n"); + else + dprintf("done\n"); +} + +uint16_t scan_timer = 0; + +void matrix_scan_user(void) { + if (timer_elapsed(scan_timer) > 5000) { + do_scan(); + scan_timer = timer_read(); + } +} + +void keyboard_post_init_user(void) { + debug_enable = true; + debug_matrix = true; + + i2c_init(); + scan_timer = timer_read(); +} diff --git a/keyboards/handwired/onekey/keymaps/i2c_scanner/readme.md b/keyboards/handwired/onekey/keymaps/i2c_scanner/readme.md new file mode 100644 index 000000000..ce6357a9c --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/i2c_scanner/readme.md @@ -0,0 +1,36 @@ +# i2c_scanner + +Aiming to provide a more qmk friendly version of <https://playground.arduino.cc/Main/I2cScanner/> + +> This very simple ~~sketch~~ keymap scans the I2C-bus for devices. If a device is found, it is reported to the ~~Arduino serial monitor~~ console. + + +## Flashing + +Pick a target that is aligned to the MCU you want to test: + +```console +make handwired/onekey/elite_c:i2c_scanner:flash # also 32u4 + dfu bootloader +make handwired/onekey/promicro:i2c_scanner:flash +make handwired/onekey/teensy_2:i2c_scanner:flash + +# ChibiOS is currently 'best effort' and might not report accurate results +make handwired/onekey/proton_c:i2c_scanner:flash +``` + +others might work with additional configuration. + +## Usage + +Output is viewable through a compatible tool <https://docs.qmk.fm/#/newbs_testing_debugging?id=debugging-tools>. + +You can change the wires, and plug-in I2C devices while the i2c_scanner is running. + +The output of the console will look like this: + +``` +Listening: +Scanning... + I2C device found at address 0x20 +done +``` diff --git a/keyboards/handwired/onekey/keymaps/i2c_scanner/rules.mk b/keyboards/handwired/onekey/keymaps/i2c_scanner/rules.mk new file mode 100644 index 000000000..04498a883 --- /dev/null +++ b/keyboards/handwired/onekey/keymaps/i2c_scanner/rules.mk @@ -0,0 +1,3 @@ +CONSOLE_ENABLE = yes + +QUANTUM_LIB_SRC += i2c_master.c |