diff options
Diffstat (limited to 'keyboards/handwired/twadlee/tp69/halconf.h')
| -rw-r--r-- | keyboards/handwired/twadlee/tp69/halconf.h | 524 |
1 files changed, 524 insertions, 0 deletions
diff --git a/keyboards/handwired/twadlee/tp69/halconf.h b/keyboards/handwired/twadlee/tp69/halconf.h new file mode 100644 index 000000000..908c75542 --- /dev/null +++ b/keyboards/handwired/twadlee/tp69/halconf.h @@ -0,0 +1,524 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +# define HALCONF_H + +# define _CHIBIOS_HAL_CONF_ +# define _CHIBIOS_HAL_CONF_VER_7_0_ + +# include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +# if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +# define HAL_USE_PAL TRUE +# endif + +/** + * @brief Enables the ADC subsystem. + */ +# if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +# define HAL_USE_ADC FALSE +# endif + +/** + * @brief Enables the CAN subsystem. + */ +# if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +# define HAL_USE_CAN FALSE +# endif + +/** + * @brief Enables the cryptographic subsystem. + */ +# if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +# define HAL_USE_CRY FALSE +# endif + +/** + * @brief Enables the DAC subsystem. + */ +# if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +# define HAL_USE_DAC FALSE +# endif + +/** + * @brief Enables the GPT subsystem. + */ +# if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +# define HAL_USE_GPT FALSE +# endif + +/** + * @brief Enables the I2C subsystem. + */ +# if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +# define HAL_USE_I2C FALSE +# endif + +/** + * @brief Enables the I2S subsystem. + */ +# if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +# define HAL_USE_I2S FALSE +# endif + +/** + * @brief Enables the ICU subsystem. + */ +# if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +# define HAL_USE_ICU FALSE +# endif + +/** + * @brief Enables the MAC subsystem. + */ +# if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +# define HAL_USE_MAC FALSE +# endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +# if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +# define HAL_USE_MMC_SPI FALSE +# endif + +/** + * @brief Enables the PWM subsystem. + */ +# if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +# define HAL_USE_PWM FALSE +# endif + +/** + * @brief Enables the RTC subsystem. + */ +# if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +# define HAL_USE_RTC FALSE +# endif + +/** + * @brief Enables the SDC subsystem. + */ +# if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +# define HAL_USE_SDC FALSE +# endif + +/** + * @brief Enables the SERIAL subsystem. + */ +# if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +# define HAL_USE_SERIAL FALSE +# endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +# if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +# define HAL_USE_SERIAL_USB FALSE +# endif + +/** + * @brief Enables the SIO subsystem. + */ +# if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +# define HAL_USE_SIO FALSE +# endif + +/** + * @brief Enables the SPI subsystem. + */ +# if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +# define HAL_USE_SPI FALSE +# endif + +/** + * @brief Enables the TRNG subsystem. + */ +# if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +# define HAL_USE_TRNG FALSE +# endif + +/** + * @brief Enables the UART subsystem. + */ +# if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +# define HAL_USE_UART FALSE +# endif + +/** + * @brief Enables the USB subsystem. + */ +# if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +# define HAL_USE_USB TRUE +# endif + +/** + * @brief Enables the WDG subsystem. + */ +# if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +# define HAL_USE_WDG FALSE +# endif + +/** + * @brief Enables the WSPI subsystem. + */ +# if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +# define HAL_USE_WSPI FALSE +# endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +# define PAL_USE_CALLBACKS FALSE +# endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +# define PAL_USE_WAIT FALSE +# endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +# define ADC_USE_WAIT TRUE +# endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define ADC_USE_MUTUAL_EXCLUSION TRUE +# endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +# if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +# define CAN_USE_SLEEP_MODE TRUE +# endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +# if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +# define CAN_ENFORCE_USE_CALLBACKS FALSE +# endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +# if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +# define HAL_CRY_USE_FALLBACK FALSE +# endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +# if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +# define HAL_CRY_ENFORCE_FALLBACK FALSE +# endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +# define DAC_USE_WAIT TRUE +# endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define DAC_USE_MUTUAL_EXCLUSION TRUE +# endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +# if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define I2C_USE_MUTUAL_EXCLUSION TRUE +# endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +# if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +# define MAC_USE_ZERO_COPY FALSE +# endif + +/** + * @brief Enables an event sources for incoming packets. + */ +# if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +# define MAC_USE_EVENTS TRUE +# endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +# if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +# define MMC_NICE_WAITING TRUE +# endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +# if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +# define SDC_INIT_RETRY 100 +# endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +# if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +# define SDC_MMC_SUPPORT FALSE +# endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +# if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +# define SDC_NICE_WAITING TRUE +# endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +# if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +# define SDC_INIT_OCR_V20 0x50FF8000U +# endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +# if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +# define SDC_INIT_OCR 0x80100000U +# endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +# if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +# define SERIAL_DEFAULT_BITRATE 38400 +# endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +# if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +# define SERIAL_BUFFERS_SIZE 16 +# endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +# if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +# define SERIAL_USB_BUFFERS_SIZE 1 +# endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +# if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +# define SERIAL_USB_BUFFERS_NUMBER 2 +# endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +# define SPI_USE_WAIT TRUE +# endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +# define SPI_USE_CIRCULAR FALSE +# endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define SPI_USE_MUTUAL_EXCLUSION TRUE +# endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +# if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +# define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +# endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +# define UART_USE_WAIT FALSE +# endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define UART_USE_MUTUAL_EXCLUSION FALSE +# endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +# define USB_USE_WAIT TRUE +# endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +# define WSPI_USE_WAIT TRUE +# endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +# if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +# define WSPI_USE_MUTUAL_EXCLUSION TRUE +# endif + +#endif /* HALCONF_H */ + +/** @} */ |