diff options
Diffstat (limited to 'keyboards/handwired')
13 files changed, 609 insertions, 0 deletions
diff --git a/keyboards/handwired/tritium_numpad/config.h b/keyboards/handwired/tritium_numpad/config.h new file mode 100644 index 000000000..83333c0fb --- /dev/null +++ b/keyboards/handwired/tritium_numpad/config.h @@ -0,0 +1,83 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0003 +#define MANUFACTURER Handwired +#define PRODUCT Tritium Numpad +#define DESCRIPTION QMK keyboard firmware for handwired numpad + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6 } +#define MATRIX_COL_PINS { F4, F6, B1, B2 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN B6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Backlight configuration + */ +#define BACKLIGHT_LEVELS 4 + +/* Underlight configuration + */ + +#define RGB_DI_PIN D2 +#define RGBLED_NUM 4 // Number of LEDs + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + diff --git a/keyboards/handwired/tritium_numpad/info.json b/keyboards/handwired/tritium_numpad/info.json new file mode 100644 index 000000000..bc10efc82 --- /dev/null +++ b/keyboards/handwired/tritium_numpad/info.json @@ -0,0 +1,21 @@ +{ + "keyboard_name": "Tritium_numpad", + "url": "https://www.thingiverse.com/thing:2855938", + "maintainer": "qmk", + "width": 4, + "height": 6, + "layouts": { + "LAYOUT_numpad_6x4": { + "key_count": 21, + "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k23", "x":3, "y":2, "h":2}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k50", "x":0, "y":5, "w":2}, {"label":"k52", "x":2, "y":5}, {"label":"k43", "x":3, "y":4, "h":2}] + }, + "LAYOUT_nontra_6x4": { + "key_count": 22, + "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k23", "x":3, "y":2, "h":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k43", "x":3, "y":4, "h":2}, {"label":"k50", "x":0, "y":5}, {"label":"k51", "x":1, "y":5}, {"label":"k52", "x":2, "y":5}] + }, + "LAYOUT_ortho_6x4": { + "key_count": 24, + "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k23", "x":3, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k33", "x":3, "y":3}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k43", "x":3, "y":4}, {"label":"k50", "x":0, "y":5}, {"label":"k51", "x":1, "y":5}, {"label":"k52", "x":2, "y":5}, {"label":"k53", "x":3, "y":5}] + } + } +} diff --git a/keyboards/handwired/tritium_numpad/keymaps/blu/keymap.c b/keyboards/handwired/tritium_numpad/keymaps/blu/keymap.c new file mode 100644 index 000000000..958c17e42 --- /dev/null +++ b/keyboards/handwired/tritium_numpad/keymaps/blu/keymap.c @@ -0,0 +1,40 @@ +#include QMK_KEYBOARD_H + +void keyboard_pre_init_user(void) +{ + // Set layer LED as an output + setPinOutput(B0); +} + +uint32_t layer_state_set_user(uint32_t state) +{ + // Switch layer LED accordingly + switch (biton32(state)) { + case 0: + writePinHigh(B0); + break; + case 1: + writePinLow(B0); + break; + } + return state; +} + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_6x4( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_BSPC, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_UP, KC_PDOT, TT(1), + KC_LEFT, KC_DOWN, KC_RGHT, BL_STEP + ), + [1] = LAYOUT_ortho_6x4( + KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_K, KC_NO, KC_NO, + KC_H, KC_NO, KC_L, KC_NO, + KC_NO, KC_J, KC_NO, KC_NO, + KC_LSFT, KC_Z, KC_X, KC_TRNS, + KC_NO, KC_NO, KC_NO, KC_NO + ) +}; diff --git a/keyboards/handwired/tritium_numpad/keymaps/blu/layers.json b/keyboards/handwired/tritium_numpad/keymaps/blu/layers.json new file mode 100644 index 000000000..5335c651f --- /dev/null +++ b/keyboards/handwired/tritium_numpad/keymaps/blu/layers.json @@ -0,0 +1 @@ +[["KC_NLCK", "KC_PSLS", "KC_PAST", "KC_PMNS", "KC_P7", "KC_P8", "KC_P9", "KC_PPLS", "KC_P4", "KC_P5", "KC_P6", "KC_BSPC", "KC_P1", "KC_P2", "KC_P3", "KC_PENT", "KC_P0", "KC_UP", "KC_PDOT", "TT(1)", "KC_LEFT", "KC_DOWN", "KC_RGHT", "BL_STEP"], ["KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_K", "KC_NO", "KC_NO", "KC_H", "KC_NO", "KC_L", "KC_NO", "KC_NO", "KC_J", "KC_NO", "KC_NO", "KC_LSFT", "KC_Z", "KC_X", "KC_TRNS", "KC_NO", "KC_NO", "KC_NO", "KC_NO"]]
\ No newline at end of file diff --git a/keyboards/handwired/tritium_numpad/keymaps/blu/readme.md b/keyboards/handwired/tritium_numpad/keymaps/blu/readme.md new file mode 100644 index 000000000..fd07b155f --- /dev/null +++ b/keyboards/handwired/tritium_numpad/keymaps/blu/readme.md @@ -0,0 +1,13 @@ +# Generated Keymap Layout + +This layout was generated by the QMK API. You can find the JSON data used to +generate this keymap in the file layers.json. + +To make use of this file you will need follow the following steps: + +* Download or Clone QMK Firmware: <https://github.com/qmk/qmk_firmware/> +* Extract QMK Firmware to a location on your hard drive +* Copy this folder into %s +* You are now ready to compile or use your keymap with the source + +More information can be found in the QMK docs: <https://docs.qmk.fm>
\ No newline at end of file diff --git a/keyboards/handwired/tritium_numpad/keymaps/default/keymap.c b/keyboards/handwired/tritium_numpad/keymaps/default/keymap.c new file mode 100644 index 000000000..60430217b --- /dev/null +++ b/keyboards/handwired/tritium_numpad/keymaps/default/keymap.c @@ -0,0 +1,59 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * |Esc |TAB |BS | = | + * |----|----|----|----| + * | NL | / | * | - | + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----| + | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 |./FN| | + * `-------------------' + */ + + [_BL] = LAYOUT_numpad_6x4( + KC_ESC, KC_TAB, KC_BSPC, KC_PEQL, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, LT(_FL,KC_PDOT), KC_PENT + ), + + /* Keymap _FL: Function Layer + * ,-------------------. + * |Esc |TAB |BS | = | + * |----|----|----|----| + * | NL | / | * | - | + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----|RST | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 |./FN| | + * `-------------------' + */ + [_FL] = LAYOUT_numpad_6x4( + KC_ESC, KC_TAB, KC_BSPC, KC_PEQL, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, RESET, + KC_P1, KC_P2, KC_P3, + KC_P0, LT(_FL,KC_PDOT), KC_PENT + ), +}; diff --git a/keyboards/handwired/tritium_numpad/keymaps/max/keymap.c b/keyboards/handwired/tritium_numpad/keymaps/max/keymap.c new file mode 100644 index 000000000..bba5c43bb --- /dev/null +++ b/keyboards/handwired/tritium_numpad/keymaps/max/keymap.c @@ -0,0 +1,59 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * |Esc |Setp| - | = | + * |----|----|----|----| + * | F1 | F2 | F3 | F4 | + * |----|----|----|----| + * | 7 | 8 | 9 | - | + * |----|----|----|----| + * | 4 | 5 | 6 | LF | + * |----|----|----|----| + * | 1 | 2 | 3 | \ | + * |----|----|----|----| + * |Left|Down| Up |Rght| + * `-------------------' + */ + + [_BL] = LAYOUT_ortho_6x4( + KC_ESC, KC_TAB, KC_MINS,KC_EQL, + KC_F1, KC_F2, KC_F3, KC_F4, + KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_P4, KC_P5, KC_P6, KC_PENT, + KC_P1, KC_P2, KC_P3, KC_BSLS, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT + ), + + /* Keymap _FL: Function Layer + * ,-------------------. + * |Esc |TAB |BS | = | + * |----|----|----|----| + * | NL | / | * | - | + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----|RST | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 |./FN| | + * `-------------------' + */ + [_FL] = LAYOUT_ortho_6x4( + KC_ESC, KC_TAB, KC_BSPC, KC_PEQL, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, RESET, + KC_P4, KC_P5, KC_P6, KC_PENT, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT + ), +}; diff --git a/keyboards/handwired/tritium_numpad/keymaps/ortho_left/keymap.c b/keyboards/handwired/tritium_numpad/keymaps/ortho_left/keymap.c new file mode 100644 index 000000000..9d569f18a --- /dev/null +++ b/keyboards/handwired/tritium_numpad/keymaps/ortho_left/keymap.c @@ -0,0 +1,59 @@ +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * | T | G | B |Spac| + * |----|----|----|----| + * | R | F | V | Fn | + * |----|----|----|----| + * | E | D | C | OS | + * |----|----|----|----| + * | W | S | X | Alt| + * |----|----|----|----| + * | Q | A | Z | Ctl| + * |----|----|----|----| + * | Esc| Tab|Shft| Fn2| + * `-------------------' + */ + + [_BL] = LAYOUT_ortho_6x4( + KC_T, KC_G, KC_B, KC_SPACE, + KC_R, KC_F, KC_V, MO(1), + KC_E, KC_D, KC_C, KC_LGUI, + KC_W, KC_S, KC_X, KC_LALT, + KC_Q, KC_A, KC_Z, KC_LCTL, + KC_TAB, KC_ESC, KC_LSHIFT, MO(1) + ), + + /* Keymap _FL: Function Layer + * ,-------------------. + * | 5 | F5 | F11|Spac| + * |----|----|----|----| + * | 4 | F4 | F10| | + * |----|----|----|----| + * | 3 | F3 | F9 | OS | + * |----|----|----|----| + * | 2 | F2 | F8 | Alt| + * |----|----|----|----| + * | 1 | F1 | F7 | Ctl| + * |----|----|----|----| + * | ` | Del|Shft| | + * `-------------------' + */ + [_FL] = LAYOUT_ortho_6x4( + KC_5, KC_F5, KC_F11, _______, + KC_4, KC_F4, KC_F10, _______, + KC_3, KC_F3, KC_F9, _______, + KC_2, KC_F2, KC_F8, _______, + KC_1, KC_F1, KC_F7, _______, + KC_GRV,KC_DEL, _______, _______ + ), +}; diff --git a/keyboards/handwired/tritium_numpad/keymaps/ortho_right/keymap.c b/keyboards/handwired/tritium_numpad/keymaps/ortho_right/keymap.c new file mode 100644 index 000000000..0dc2f81bc --- /dev/null +++ b/keyboards/handwired/tritium_numpad/keymaps/ortho_right/keymap.c @@ -0,0 +1,61 @@ +#include QMK_KEYBOARD_H + +#ifdef RGBLIGHT_ENABLE +#endif + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BL 0 +#define _FL 1 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * |Spac| N | H | Y | + * |----|----|----|----| + * | Fn | M | J | U | + * |----|----|----|----| + * |Left| , | K | I | + * |----|----|----|----| + * |Down| . | L | O | + * |----|----|----|----| + * | Up | / | ; | P | + * |----|----|----|----| + * |Rght| Ret| " |Bspc| + * `-------------------' + */ + [_BL] = LAYOUT_ortho_6x4( + KC_SPACE, KC_N, KC_H, KC_Y, + MO(1), KC_M, KC_J, KC_U, + KC_LEFT, KC_COMM, KC_K, KC_I, + KC_DOWN, KC_DOT, KC_L, KC_O, + KC_UP, KC_SLASH, KC_SCLN, KC_P, + KC_RIGHT, KC_ENT, KC_QUOT, KC_BSPC + ), + + /* Keymap _FL: Function Layer + * ,-------------------. + * |Esc | F12| F6 | 6 | + * |----|----|----|----| + * | NL | M | - | 7 | + * |----|----|----|----| + * |Left| , | = | 8 | + * |----|----|----|----| + * |Down| . | [ | 9 | + * |----|----|----|----| + * | Up | / | ] | 0 | + * |----|----|----|----| + * |Rght| Ret| \ | Del| + * `-------------------' + */ + [_FL] = LAYOUT_ortho_6x4( + _______, KC_F12, KC_F6, KC_6, + _______, _______, KC_MINS, KC_7, + _______, _______, KC_EQL, KC_8, + _______, _______, KC_LBRC, KC_9, + _______, _______, KC_RBRC, KC_0, + _______, _______, KC_BSLS, KC_DEL + ), +}; diff --git a/keyboards/handwired/tritium_numpad/readme.md b/keyboards/handwired/tritium_numpad/readme.md new file mode 100644 index 000000000..21acfe759 --- /dev/null +++ b/keyboards/handwired/tritium_numpad/readme.md @@ -0,0 +1,28 @@ +Tritium Numpad +=== + +Keyboard Maintainer: QMK Community +Hardware Supported: Handwired 6x4 numpads using promicro controller +Hardware Availability: https://www.thingiverse.com/thing:2855938 + +Wiring is accomplished on the Pro Micro board using the following pins as rows: +* D2 : Row 1 +* D3 : Row 2 +* D4 : Row 3 +* D5 : Row 4 +* D6 : Row 5 +* D7 : Row 6 + +and the following pins as columns: +* A3 : Col 1 +* A1 : Col 2 +* D15 : Col 3 +* D16 : Col 4 + +Make example for this keyboard (after setting up your build environment): + + make tritium_numpad:default + +Bootmagic is enabled. Press the key at 0,0 (usually escape or numlock in the top left corner) while plugging the keyboard in to jump to bootloader. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/tritium_numpad/rules.mk b/keyboards/handwired/tritium_numpad/rules.mk new file mode 100644 index 000000000..c990a6ab1 --- /dev/null +++ b/keyboards/handwired/tritium_numpad/rules.mk @@ -0,0 +1,61 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE = lite # Key at 0,0 makes the keyboard go into bootloader(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID + +LAYOUTS = numpad_6x4 ortho_6x4 nontra_6x4 diff --git a/keyboards/handwired/tritium_numpad/tritium_numpad.c b/keyboards/handwired/tritium_numpad/tritium_numpad.c new file mode 100644 index 000000000..7193a934d --- /dev/null +++ b/keyboards/handwired/tritium_numpad/tritium_numpad.c @@ -0,0 +1,29 @@ +#include "tritium_numpad.h" +#include "led.h" + +void keyboard_pre_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + keyboard_pre_init_user(); + led_init_ports(); +}; + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + matrix_scan_user(); +}; + +void led_init_ports(void) { + // * Set our LED pins as output + // Numlock LED + setPinOutput(D5); +} + +void led_set_kb(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + writePinLow(D5); + } else { + writePinHigh(D5); + } +} diff --git a/keyboards/handwired/tritium_numpad/tritium_numpad.h b/keyboards/handwired/tritium_numpad/tritium_numpad.h new file mode 100644 index 000000000..8d2e78329 --- /dev/null +++ b/keyboards/handwired/tritium_numpad/tritium_numpad.h @@ -0,0 +1,95 @@ +#pragma once + +#include "quantum.h" + +// readability +#define XXX KC_NO + +/* matrix layout + * ,-------------------. + * | 00 | 01 | 02 | 03 | + * |----|----|----|----| + * | 10 | 11 | 12 | 13 | + * |----|----|----|----| + * | 20 | 21 | 22 | | + * |----|----|----| 23 | + * | 30 | 31 | 32 | | + * |----|----|----|----| + * | 40 | 41 | 42 | | + * |----|----|----| 43 | + * | 50 | 52 | | + * `-------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define LAYOUT_numpad_6x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, \ + k30, k31, k32, k23, \ + k40, k41, k42, \ + k50, k52, k43 \ +) \ +{ \ + {k00, k01, k02, k03}, \ + {k10, k11, k12, k13}, \ + {k20, k21, k22, k23}, \ + {k30, k31, k32, XXX}, \ + {k40, k41, k42, k43}, \ + {k50, XXX, k52, XXX} \ +} + +/* matrix layout + * ,-------------------. + * | 00 | 01 | 02 | 03 | + * |----|----|----|----| + * | 10 | 11 | 12 | 13 | + * |----|----|----|----| + * | 20 | 21 | 22 | | + * |----|----|----| 23 | + * | 30 | 31 | 32 | | + * |----|----|----|----| + * | 40 | 41 | 42 | | + * |----|----|----| 43 | + * | 50 | 51 | 52 | | + * `-------------------' + */ +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array +#define LAYOUT_nontra_6x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, \ + k30, k31, k32, k23, \ + k40, k41, k42, \ + k50, k51, k52, k43 \ +) \ +{ \ + {k00, k01, k02, k03}, \ + {k10, k11, k12, k13}, \ + {k20, k21, k22, k23}, \ + {k30, k31, k32, xxx}, \ + {k40, k41, k42, k43}, \ + {k50, k51, k52, xxx} \ +} + +#define LAYOUT_ortho_6x4( \ + k00, k01, k02, k03, \ + k10, k11, k12, k13, \ + k20, k21, k22, k23, \ + k30, k31, k32, k33, \ + k40, k41, k42, k43, \ + k50, k51, k52, k53 \ +) \ +{ \ + {k00, k01, k02, k03}, \ + {k10, k11, k12, k13}, \ + {k20, k21, k22, k23}, \ + {k30, k31, k32, k33}, \ + {k40, k41, k42, k43}, \ + {k50, k51, k52, k53} \ +} + +void keyboard_pre_init_user(void); +void matrix_scan_user(void); + |