diff options
Diffstat (limited to 'keyboards/handwired')
| -rw-r--r-- | keyboards/handwired/pilcrow/Makefile | 3 | ||||
| -rw-r--r-- | keyboards/handwired/pilcrow/config.h | 162 | ||||
| -rw-r--r-- | keyboards/handwired/pilcrow/keymaps/default/Makefile | 21 | ||||
| -rw-r--r-- | keyboards/handwired/pilcrow/keymaps/default/config.h | 8 | ||||
| -rw-r--r-- | keyboards/handwired/pilcrow/keymaps/default/keymap.c | 88 | ||||
| -rw-r--r-- | keyboards/handwired/pilcrow/keymaps/default/readme.md | 1 | ||||
| -rw-r--r-- | keyboards/handwired/pilcrow/pilcrow.c | 28 | ||||
| -rw-r--r-- | keyboards/handwired/pilcrow/pilcrow.h | 23 | ||||
| -rw-r--r-- | keyboards/handwired/pilcrow/readme.md | 28 | ||||
| -rw-r--r-- | keyboards/handwired/pilcrow/rules.mk | 67 | ||||
| -rw-r--r-- | keyboards/handwired/promethium/config.h | 12 | ||||
| -rw-r--r-- | keyboards/handwired/promethium/keymaps/priyadi/Makefile | 7 | ||||
| -rwxr-xr-x | keyboards/handwired/promethium/keymaps/priyadi/flash.sh | 1 | ||||
| -rw-r--r-- | keyboards/handwired/promethium/keymaps/priyadi/keymap.c | 146 | ||||
| -rw-r--r-- | keyboards/handwired/promethium/promethium.h | 108 | ||||
| -rw-r--r-- | keyboards/handwired/promethium/rules.mk | 5 |
16 files changed, 612 insertions, 96 deletions
diff --git a/keyboards/handwired/pilcrow/Makefile b/keyboards/handwired/pilcrow/Makefile new file mode 100644 index 000000000..191c6bb66 --- /dev/null +++ b/keyboards/handwired/pilcrow/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/pilcrow/config.h b/keyboards/handwired/pilcrow/config.h new file mode 100644 index 000000000..d63eeba36 --- /dev/null +++ b/keyboards/handwired/pilcrow/config.h @@ -0,0 +1,162 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER You +#define PRODUCT pilcrow +#define DESCRIPTION A custom keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B4, F7, B1, B3 } +#define MATRIX_COL_PINS { D4, C6, D7, E6, F5, F6, B6, B2, F4, B5} +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +#endif diff --git a/keyboards/handwired/pilcrow/keymaps/default/Makefile b/keyboards/handwired/pilcrow/keymaps/default/Makefile new file mode 100644 index 000000000..f4671a9d1 --- /dev/null +++ b/keyboards/handwired/pilcrow/keymaps/default/Makefile @@ -0,0 +1,21 @@ +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif
\ No newline at end of file diff --git a/keyboards/handwired/pilcrow/keymaps/default/config.h b/keyboards/handwired/pilcrow/keymaps/default/config.h new file mode 100644 index 000000000..df06a2620 --- /dev/null +++ b/keyboards/handwired/pilcrow/keymaps/default/config.h @@ -0,0 +1,8 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +// place overrides here + +#endif
\ No newline at end of file diff --git a/keyboards/handwired/pilcrow/keymaps/default/keymap.c b/keyboards/handwired/pilcrow/keymaps/default/keymap.c new file mode 100644 index 000000000..e382e4c6a --- /dev/null +++ b/keyboards/handwired/pilcrow/keymaps/default/keymap.c @@ -0,0 +1,88 @@ +#include "pilcrow.h" +#define _______ KC_TRNS +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = KEYMAP( \ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, \ + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, \ + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, \ + KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MT(MOD_LSFT, KC_SPC), MO(2), MO(3), KC_DEL, KC_ESC \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[1] = KEYMAP( \ + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, \ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, \ + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_PIPE, S(KC_QUOT), \ + _______, _______, _______, _______, KC_BSPC, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_GRV \ +), +[2] = KEYMAP( \ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, \ + KC_TAB, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT,KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, \ + OSM(MOD_LSFT), KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_BSLS, KC_QUOT, \ + _______, _______, _______, _______, KC_ENT, KC_ENT, _______, KC_MNXT, KC_VOLD, KC_VOLU \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[3] = KEYMAP( \ + RESET, KC_UP, _______, _______, _______, _______, _______, KC_MS_WH_DOWN, KC_MS_U, KC_MS_WH_UP, \ + KC_LEFT, KC_DOWN, KC_RIGHT, AU_ON, AU_OFF, AG_NORM, AG_SWAP, KC_MS_L,KC_MS_D, KC_MS_R, \ + RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, \ + _______, _______, _______, _______, KC_MS_BTN1, KC_MS_BTN2, _______, _______, _______, _______ \ +) +}; + +const uint16_t PROGMEM fn_actions[] = { + +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + // MACRODOWN only works in this function + switch(id) { + case 0: + if (record->event.pressed) { + register_code(KC_RSFT); + } else { + unregister_code(KC_RSFT); + } + break; + } + return MACRO_NONE; +}; + + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void led_set_user(uint8_t usb_led) { + +}
\ No newline at end of file diff --git a/keyboards/handwired/pilcrow/keymaps/default/readme.md b/keyboards/handwired/pilcrow/keymaps/default/readme.md new file mode 100644 index 000000000..95472dfca --- /dev/null +++ b/keyboards/handwired/pilcrow/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for pilcrow
\ No newline at end of file diff --git a/keyboards/handwired/pilcrow/pilcrow.c b/keyboards/handwired/pilcrow/pilcrow.c new file mode 100644 index 000000000..c8243df7b --- /dev/null +++ b/keyboards/handwired/pilcrow/pilcrow.c @@ -0,0 +1,28 @@ +#include "pilcrow.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + led_set_user(usb_led); +} diff --git a/keyboards/handwired/pilcrow/pilcrow.h b/keyboards/handwired/pilcrow/pilcrow.h new file mode 100644 index 000000000..7138ccb3f --- /dev/null +++ b/keyboards/handwired/pilcrow/pilcrow.h @@ -0,0 +1,23 @@ +#ifndef PILCROW_H +#define PILCROW_H + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The following is an example using the Planck MIT layout +// The first section contains all of the arguements +// The second converts the arguments into a two-dimensional array +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39 } \ +} + +#endif diff --git a/keyboards/handwired/pilcrow/readme.md b/keyboards/handwired/pilcrow/readme.md new file mode 100644 index 000000000..7a7f6d2af --- /dev/null +++ b/keyboards/handwired/pilcrow/readme.md @@ -0,0 +1,28 @@ +pilcrow keyboard firmware +====================== + +## Quantum MK Firmware + +For the full Quantum feature list, see [the parent readme](/). + +## Building + +Download or clone the whole firmware and navigate to the keyboards/pilcrow folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. + +Depending on which keymap you would like to use, you will have to compile slightly differently. + +### Default + +To build with the default keymap, simply run `make default`. + +### Other Keymaps + +Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. + +To build the firmware binary hex file with a keymap just do `make` with a keymap like this: + +``` +$ make [default|jack|<name>] +``` + +Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder. diff --git a/keyboards/handwired/pilcrow/rules.mk b/keyboards/handwired/pilcrow/rules.mk new file mode 100644 index 000000000..55898147d --- /dev/null +++ b/keyboards/handwired/pilcrow/rules.mk @@ -0,0 +1,67 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=512 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +CONSOLE_ENABLE ?= yes # Console for debug(+400) +COMMAND_ENABLE ?= yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE ?= no # USB Nkey Rollover +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default +MIDI_ENABLE ?= no # MIDI controls +UNICODE_ENABLE ?= no # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE ?= no # Audio output on port C6 diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index 473af67d3..23fbfd0b9 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -20,13 +20,19 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "config_common.h" +#define USB_VENDOR_ID_LENOVO 0x17ef +#define USB_DEVICE_ID_LENOVO_TPKBD 0x6009 +#define USB_DEVICE_ID_LENOVO_CUSBKBD 0x6047 +#define USB_DEVICE_ID_LENOVO_CBTKBD 0x6048 +#define USB_DEVICE_ID_LENOVO_TPPRODOCK 0x6067 + /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6660 +#define VENDOR_ID USB_VENDOR_ID_LENOVO +#define PRODUCT_ID USB_DEVICE_ID_LENOVO_CBTKBD #define DEVICE_VER 0x0001 #define MANUFACTURER Priyadi #define PRODUCT Promethium Keyboard -#define DESCRIPTION Promethium Keyboard +#define DESCRIPTION /* key matrix size */ #define MATRIX_ROWS 8 diff --git a/keyboards/handwired/promethium/keymaps/priyadi/Makefile b/keyboards/handwired/promethium/keymaps/priyadi/Makefile index 2f6f27a73..46fdfa011 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/Makefile +++ b/keyboards/handwired/promethium/keymaps/priyadi/Makefile @@ -4,16 +4,17 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode +UNICODEMAP_ENABLE = yes BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. PS2_MOUSE_ENABLE = yes diff --git a/keyboards/handwired/promethium/keymaps/priyadi/flash.sh b/keyboards/handwired/promethium/keymaps/priyadi/flash.sh index fb81a54ee..14a3b4378 100755 --- a/keyboards/handwired/promethium/keymaps/priyadi/flash.sh +++ b/keyboards/handwired/promethium/keymaps/priyadi/flash.sh @@ -1,3 +1,4 @@ #!/bin/sh +sleep 10 avrdude -p m32u4 -P /dev/ttyACM0 -c avr109 -U flash:w:../../../../../.build/handwired_promethium_priyadi.hex diff --git a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c index b2da2f97b..7ae269563 100644 --- a/keyboards/handwired/promethium/keymaps/priyadi/keymap.c +++ b/keyboards/handwired/promethium/keymaps/priyadi/keymap.c @@ -11,6 +11,8 @@ #include "process_unicode.h" #include "quantum.h" #include "rgbsps.h" +#include "ps2_mouse.h" +#include "ps2.h" #define COUNT(x) (sizeof (x) / sizeof (*(x))) // #define RGBLED_NUM 5 @@ -282,25 +284,25 @@ void led_layer_func(void) { rgbsps_set(LED_K, 15, 0, 15); rgbsps_set(LED_L, 15, 0, 15); - rgbsps_set(LED_U, 15, 0, 10); - rgbsps_set(LED_O, 15, 0, 10); - rgbsps_set(LED_COMM, 15, 0, 10); - rgbsps_set(LED_DOT, 15, 0, 10); - rgbsps_set(LED_SCLN, 15, 0, 10); - rgbsps_set(LED_P, 15, 0, 10); - - rgbsps_set(LED_Q, 10, 0, 15); - rgbsps_set(LED_W, 10, 0, 15); - rgbsps_set(LED_E, 10, 0, 15); - rgbsps_set(LED_R, 10, 0, 15); - rgbsps_set(LED_A, 10, 0, 15); - rgbsps_set(LED_S, 10, 0, 15); - rgbsps_set(LED_D, 10, 0, 15); - rgbsps_set(LED_F, 10, 0, 15); - rgbsps_set(LED_Z, 10, 0, 15); - rgbsps_set(LED_X, 10, 0, 15); - rgbsps_set(LED_C, 10, 0, 15); - rgbsps_set(LED_V, 10, 0, 15); + rgbsps_set(LED_U, 15, 0, 0); + rgbsps_set(LED_O, 15, 0, 0); + rgbsps_set(LED_COMM, 15, 0, 0); + rgbsps_set(LED_DOT, 15, 0, 0); + rgbsps_set(LED_SCLN, 15, 0, 0); + rgbsps_set(LED_P, 15, 0, 0); + + rgbsps_set(LED_Q, 0, 15, 0); + rgbsps_set(LED_W, 0, 15, 0); + rgbsps_set(LED_E, 0, 15, 0); + rgbsps_set(LED_R, 0, 15, 0); + rgbsps_set(LED_A, 0, 15, 0); + rgbsps_set(LED_S, 0, 15, 0); + rgbsps_set(LED_D, 0, 15, 0); + rgbsps_set(LED_F, 0, 15, 0); + rgbsps_set(LED_Z, 0, 15, 0); + rgbsps_set(LED_X, 0, 15, 0); + rgbsps_set(LED_C, 0, 15, 0); + rgbsps_set(LED_V, 0, 15, 0); rgbsps_send(); } @@ -361,7 +363,15 @@ void led_layer_num(void) { } void led_layer_emoji(void) { - rgbsps_setall(15, 15, 0); + for(uint8_t i = 0; i < COUNT(LED_ALNUM); i++) { + rgbsps_set(pgm_read_byte(&LED_ALNUM[i]), 15, 15, 0); + } + for(uint8_t i = 0; i < COUNT(LED_MODS); i++) { + rgbsps_set(pgm_read_byte(&LED_MODS[i]), 15, 15, 0); + } + for(uint8_t i = 0; i < COUNT(LED_FN); i++) { + rgbsps_set(pgm_read_byte(&LED_FN[i]), 15, 15, 0); + } rgbsps_set(LED_IND_FUNC, 0, 0, 0); rgbsps_set(LED_IND_NUM, 0, 0, 0); @@ -415,7 +425,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_QWERTY] = KEYMAP( KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT , + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT , KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL ), @@ -432,10 +442,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_COLEMAK] = KEYMAP( - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT , - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL + _______, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, _______, + _______, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, _______, + _______, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* Workman @@ -450,10 +460,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_WORKMAN] = KEYMAP( - KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC, - KC_ESC, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_ENT , - KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, PUNC, NUM, KC_SPC, KC_SPC, FUNC, EMOJI, KC_RALT, KC_RGUI, KC_RCTL + _______, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, _______, + _______, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, _______, + _______, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* Punc @@ -541,7 +551,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_GUI] = KEYMAP( _______, LGUI(KC_1),LGUI(KC_2),LGUI(KC_3),LGUI(KC_4),LGUI(KC_5),LGUI(KC_6),LGUI(KC_7),LGUI(KC_8),LGUI(KC_9),LGUI(KC_0), _______, - LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,_______, QWERTY, + LINUX, _______, KC_VOLD, KC_MUTE, KC_VOLU,_______,_______,KC_WWW_BACK,_______,KC_WWW_FORWARD,KC_PAUS, QWERTY, WIN, _______, KC_MPRV, KC_MPLY, KC_MNXT, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, COLEMAK, OSX, _______, _______, _______, _______, BL_DEC, BL_INC, _______, _______, RGB_VAI, RGB_VAD, WORKMAN ), @@ -572,6 +582,39 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #endif switch (keycode) { + // QWERTZ style comma and dot: semicolon and colon when shifted + case KC_COMM: + if (record->event.pressed) { + bool lshifted = keyboard_report->mods & MOD_BIT(KC_LSFT); + bool rshifted = keyboard_report->mods & MOD_BIT(KC_RSFT); + if (lshifted || rshifted) { + if (lshifted) unregister_code(KC_LSFT); + if (rshifted) unregister_code(KC_RSFT); + register_code(KC_SCLN); + unregister_code(KC_SCLN); + if (lshifted) register_code(KC_LSFT); + if (rshifted) register_code(KC_RSFT); + } else { + register_code(KC_COMM); + unregister_code(KC_COMM); + } + } + return false; + break; + case KC_DOT: + if (record->event.pressed) { + if ((keyboard_report->mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT))) { + register_code(KC_SCLN); + unregister_code(KC_SCLN); + } else { + register_code(KC_DOT); + unregister_code(KC_DOT); + } + } + return false; + break; + + // layout switchers case QWERTY: if (record->event.pressed) { #ifdef AUDIO_ENABLE @@ -600,8 +643,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; break; - - + // layer switcher case PUNC: if (record->event.pressed) { layer_on(_PUNC); @@ -663,7 +705,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; break; - + // OS switchers case LINUX: set_unicode_input_mode(UC_LNX); #ifdef AUDIO_ENABLE @@ -722,4 +764,40 @@ void shutdown_user() stop_all_notes(); } -#endif
\ No newline at end of file +#endif + + +void ps2_mouse_init_user() { + uint8_t rcv; + + // set TrackPoint sensitivity + PS2_MOUSE_SEND(0xE2, "set trackpoint sensitivity: 0xE2"); + PS2_MOUSE_SEND(0x81, "set trackpoint sensitivity: 0x81"); + PS2_MOUSE_SEND(0x4A, "set trackpoint sensitivity: 0x4A"); + PS2_MOUSE_SEND(0x49, "set trackpoint sensitivity: 0x59"); + + // set TrackPoint Negative Inertia factor + PS2_MOUSE_SEND(0xE2, "set negative inertia factor: 0xE2"); + PS2_MOUSE_SEND(0x81, "set negative inertia factor: 0x81"); + PS2_MOUSE_SEND(0x4D, "set negative inertia factor: 0x4D"); + PS2_MOUSE_SEND(0x06, "set negative inertia factor: 0x06"); + + // set TrackPoint speed + // (transfer function upper plateau speed) + PS2_MOUSE_SEND(0xE2, "set trackpoint speed: 0xE2"); + PS2_MOUSE_SEND(0x81, "set trackpoint speed: 0x81"); + PS2_MOUSE_SEND(0x60, "set trackpoint speed: 0x60"); + PS2_MOUSE_SEND(0x61, "set trackpoint speed: 0x61"); + + // inquire pts status + rcv = ps2_host_send(0xE2); + rcv = ps2_host_send(0x2C); + rcv = ps2_host_recv_response(); + if ((rcv & 1) == 1) { + // if on, disable pts + rcv = ps2_host_send(0xE2); + rcv = ps2_host_send(0x47); + rcv = ps2_host_send(0x2C); + rcv = ps2_host_send(0x01); + } +}
\ No newline at end of file diff --git a/keyboards/handwired/promethium/promethium.h b/keyboards/handwired/promethium/promethium.h index 8f2a8c3be..662eeab99 100644 --- a/keyboards/handwired/promethium/promethium.h +++ b/keyboards/handwired/promethium/promethium.h @@ -23,77 +23,77 @@ } enum led_sequence { - LED_IND_EMOJI, - LED_IND_NUM, - LED_IND_FUNC, - - LED_IND_BATTERY, - LED_IND_USB, LED_IND_BLUETOOTH, + LED_IND_USB, + LED_IND_BATTERY, - LED_TAB, - LED_ESC, - LED_LSFT, - LED_LCTL, - - LED_LGUI, - LED_Z, - LED_A, - LED_Q, + LED_IND_FUNC, + LED_IND_NUM, + LED_IND_EMOJI, - LED_W, - LED_S, - LED_X, - LED_LALT, + LED_BKSP, + LED_ENT, + LED_RSFT, + LED_RCTL, - LED_PUNC, - LED_C, - LED_D, - LED_E, + LED_RGUI, + LED_SLSH, + LED_SCLN, + LED_P, - LED_R, - LED_F, - LED_V, - LED_NUM, + LED_O, + LED_L, + LED_DOT, + LED_RALT, - LED_LSPC, - LED_B, - LED_G, - LED_T, + LED_EMOJI, + LED_COMM, + LED_K, + LED_I, - LED_TRACKPOINT1, - LED_TRACKPOINT2, - LED_TRACKPOINT3, + LED_U, + LED_J, + LED_M, + LED_FUNC, LED_RSPC, LED_N, LED_HH, LED_Y, - LED_U, - LED_J, - LED_M, - LED_FUNC, + LED_TRACKPOINT3, + LED_TRACKPOINT2, + LED_TRACKPOINT1, - LED_EMOJI, - LED_COMM, - LED_K, - LED_I, + LED_LSPC, + LED_B, + LED_G, + LED_T, - LED_O, - LED_L, - LED_DOT, - LED_RALT, + LED_R, + LED_F, + LED_V, + LED_NUM, - LED_RGUI, - LED_SLSH, - LED_SCLN, - LED_P, + LED_PUNC, + LED_C, + LED_D, + LED_E, - LED_BKSP, - LED_ENT, - LED_RSFT, - LED_RCTL + LED_W, + LED_S, + LED_X, + LED_LALT, + + LED_LGUI, + LED_Z, + LED_A, + LED_Q, + + LED_TAB, + LED_ESC, + LED_LSFT, + LED_LCTL, }; #endif diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk index 0842780cc..465ef3359 100644 --- a/keyboards/handwired/promethium/rules.mk +++ b/keyboards/handwired/promethium/rules.mk @@ -1,4 +1,3 @@ - # MCU name #MCU = at90usb1287 MCU = atmega32u4 @@ -61,11 +60,13 @@ BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality MIDI_ENABLE ?= no # MIDI controls AUDIO_ENABLE ?= no # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode -UNICODEMAP_ENABLE = yes +UNICODEMAP_ENABLE ?= yes BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. PS2_MOUSE_ENABLE ?= yes PS2_USE_INT ?= yes +ADAFRUIT_BLE_ENABLE ?= yes +API_SYSEX_ENABLE ?= no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend |