1 files changed, 1 insertions, 67 deletions
diff --git a/keyboards/hs60/v2/keymaps/win_osx_dual/rules.mk b/keyboards/hs60/v2/keymaps/win_osx_dual/rules.mk
index 1dc96d04b..1e5b99807 100644
--- a/keyboards/hs60/v2/keymaps/win_osx_dual/rules.mk
+++ b/keyboards/hs60/v2/keymaps/win_osx_dual/rules.mk
@@ -1,67 +1 @@
-# project specific files
-SRC =	keyboards/wilba_tech/wt_main.c \
-		keyboards/wilba_tech/wt_rgb_backlight.c \
-		drivers/issi/is31fl3733.c \
-		quantum/color.c \
-		drivers/arm/i2c_master.c
-
-## chip/board settings
-#   the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Do not put the microcontroller into power saving mode
-# when we get USB suspend event. We want it to keep updating
-# backlight effects.
-OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
-
-# Build Options
-#   comment out to disable the options.
-#
-BACKLIGHT_ENABLE = no              # Enable keyboard backlight functionality
-BOOTMAGIC_ENABLE = yes             # Virtual DIP switch configuration
-MOUSEKEY_ENABLE = yes              # Mouse keys
-EXTRAKEY_ENABLE = yes              # Audio control and System control
-CONSOLE_ENABLE = no                # Console for debug
-COMMAND_ENABLE = no                # Commands for debug and configuration
-SLEEP_LED_ENABLE = no              # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes                  # USB Nkey Rollover
-AUDIO_ENABLE = no                  # Audio output on port C6
-NO_USB_STARTUP_CHECK = no          # Disable initialization only when usb is plugged in
-#SERIAL_LINK_ENABLE = yes
-
-RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes
-CIE1931_CURVE = yes
+VIA_ENABLE = yes