diff options
Diffstat (limited to 'keyboards/kbdfans')
67 files changed, 2412 insertions, 38 deletions
diff --git a/keyboards/kbdfans/kbd19x/config.h b/keyboards/kbdfans/kbd19x/config.h index 9c5f2ba38..d722dc261 100644 --- a/keyboards/kbdfans/kbd19x/config.h +++ b/keyboards/kbdfans/kbd19x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd4x/config.h b/keyboards/kbdfans/kbd4x/config.h index c99fcc73f..07bc4b990 100644 --- a/keyboards/kbdfans/kbd4x/config.h +++ b/keyboards/kbdfans/kbd4x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd66/config.h b/keyboards/kbdfans/kbd66/config.h index 730df1307..a2666a619 100644 --- a/keyboards/kbdfans/kbd66/config.h +++ b/keyboards/kbdfans/kbd66/config.h @@ -54,7 +54,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define BREATHING_PERIOD 6 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST @@ -180,4 +180,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 1 - diff --git a/keyboards/kbdfans/kbd67/hotswap/config.h b/keyboards/kbdfans/kbd67/hotswap/config.h index 8822b213e..fca9916ed 100644 --- a/keyboards/kbdfans/kbd67/hotswap/config.h +++ b/keyboards/kbdfans/kbd67/hotswap/config.h @@ -80,7 +80,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/bcat/keymap.c b/keyboards/kbdfans/kbd67/hotswap/keymaps/bcat/keymap.c index de18f2ff4..6cb6afaea 100644 --- a/keyboards/kbdfans/kbd67/hotswap/keymaps/bcat/keymap.c +++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/bcat/keymap.c @@ -11,19 +11,19 @@ enum layer { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Default layer: http://www.keyboard-layout-editor.com/#/gists/dd675b40cc4df2c7bb78847ac29f5988 */ [LAYER_DEFAULT] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_HOME, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, \ - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, LY_FUNC, KC_LEFT, KC_DOWN, KC_RGHT \ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, LY_FUNC, KC_LEFT, KC_DOWN, KC_RGHT ), /* Function layer: http://www.keyboard-layout-editor.com/#/gists/f29128427f674c43777f045e363d1b44 */ [LAYER_FUNCTION] = LAYOUT( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, \ - _______, KC_MPLY, KC_VOLU, KC_MSTP, _______, _______, EEP_RST, _______, _______, KC_INS, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, _______, \ - KC_CAPS, KC_MPRV, KC_VOLD, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, KC_APP, _______, _______, _______, _______ \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, _______, + _______, KC_MPLY, KC_VOLU, KC_MSTP, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, _______, _______, _______, _______, + KC_CAPS, KC_MPRV, KC_VOLD, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_APP, _______, _______, _______, _______ ), }; diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/bcat/readme.md b/keyboards/kbdfans/kbd67/hotswap/keymaps/bcat/readme.md index 88b9742a6..d1779152f 100644 --- a/keyboards/kbdfans/kbd67/hotswap/keymaps/bcat/readme.md +++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/bcat/readme.md @@ -10,4 +10,4 @@ cluster. ## Function layer - + diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/config.h b/keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/config.h new file mode 100644 index 000000000..16497ddf0 --- /dev/null +++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/config.h @@ -0,0 +1,19 @@ +#pragma once + +#define FORCE_NKRO + +#define MOUSEKEY_DELAY 50 +#define MOUSEKEY_INTERVAL 15 +#define MOUSEKEY_MAX_SPEED 4 +#define MOUSEKEY_TIME_TO_MAX 50 +#define MOUSEKEY_WHEEL_MAX_SPEED 1 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 50 + +#define NO_ACTION_FUNCTION +#define NO_ACTION_MACRO +#define NO_ACTION_ONESHOT + +#define PERMISSIVE_HOLD +#define TAPPING_TERM 200 +#define TAPPING_TOGGLE 2 +#define TAP_HOLD_CAPS_DELAY 50 diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/keymap.c b/keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/keymap.c new file mode 100644 index 000000000..7e36eb783 --- /dev/null +++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/keymap.c @@ -0,0 +1,79 @@ +#include QMK_KEYBOARD_H + +#define FN MO(L_FN) +#define FN_CAPS LT(L_FN, KC_CAPS) +#define FN_ESC LT(L_FN, KC_ESC) +#define FN_FNLK TT(L_FN) + +#define MV_UP LCTL(KC_UP) +#define MV_DOWN LCTL(KC_DOWN) +#define MV_LEFT LCTL(KC_LEFT) +#define MV_RGHT LCTL(KC_RGHT) +#define TOP LCTL(KC_HOME) +#define BOTTOM LCTL(KC_END) + +enum keycodes { + CLEAR = SAFE_RANGE, +}; + +enum layers { + L_BASE, + L_FN, +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case CLEAR: + if (record->event.pressed) { + SEND_STRING(SS_LCTRL("a") SS_TAP(X_DELETE)); + } + return false; + + default: + return true; + } +} + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base layer + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ \ │ ` │PSc│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │Bspc │Del│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │FnEsc │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │PgU│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │LCtl│LGui│LAlt│ Space │RAlt│FnLk│ │ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + [L_BASE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_PSCR, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, \ + FN_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, FN_FNLK, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + + /* Function layer + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│NLk│SLk│Pau│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ + * │ │M2 │M↑ │M1 │M3 │ │ │ │ │Stp│Ply│Prv│Nxt│Clear│Ins│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ │M← │M↓ │M→ │MW↑│ │ │Mv←│ ↓ │ ↑ │Mv→│ │ │Top│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ │MA0│MA2│MW←│MW→│ │ │App│Vo-│Vo+│Mut│ │PgU│Btm│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │ │DtPR│DtNA│ MW↓ │ │ │ │Hom│PgD│End│ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + [L_FN] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NLCK, KC_SLCK, KC_PAUS, \ + _______, KC_BTN2, KC_MS_U, KC_BTN1, KC_BTN3, _______, _______, _______, _______, KC_MSTP, KC_MPLY, KC_MPRV, KC_MNXT, CLEAR, KC_INS, \ + _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_U, _______, MV_LEFT, KC_DOWN, KC_UP, MV_RGHT, _______, _______, _______, TOP, \ + _______, KC_ACL0, KC_ACL2, KC_WH_L, KC_WH_R, _______, _______, KC_APP, KC_VOLD, KC_VOLU, KC_MUTE, _______, KC_PGUP, BOTTOM, \ + _______, _______, _______, KC_WH_D, _______, _______, KC_HOME, KC_PGDN, KC_END \ + ), +}; diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/rules.mk b/keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/rules.mk new file mode 100644 index 000000000..16eb6cb44 --- /dev/null +++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/stevanmilic/rules.mk @@ -0,0 +1,6 @@ +BOOTMAGIC_ENABLE = no +COMMAND_ENABLE = yes +CONSOLE_ENABLE = yes +EXTRAKEY_ENABLE = yes +MOUSEKEY_ENABLE = yes +NKRO_ENABLE = yes diff --git a/keyboards/kbdfans/kbd67/hotswap/readme.md b/keyboards/kbdfans/kbd67/hotswap/readme.md index 6b4070593..bb64c03e3 100644 --- a/keyboards/kbdfans/kbd67/hotswap/readme.md +++ b/keyboards/kbdfans/kbd67/hotswap/readme.md @@ -1,4 +1,4 @@ -# hotswap +# KBD67 hotswap A 65% hot swap board with blocker and USB Type C port. @@ -8,6 +8,6 @@ Hardware Availability: [KBDFans](https://kbdfans.cn/products/coming-soon-kbd67-m Make example for this keyboard (after setting up your build environment): - make kbd67/hotswap:default + make kbdfans/kbd67/hotswap:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd67/readme.md b/keyboards/kbdfans/kbd67/readme.md index 6d5f774e6..1fa245881 100644 --- a/keyboards/kbdfans/kbd67/readme.md +++ b/keyboards/kbdfans/kbd67/readme.md @@ -1,17 +1,22 @@ # KBD67 -A 65% keyboard sold in two variants. Rev1 was a typical keyboard that had to be soldered together, supporting multiple layouts. -Months later, a new version with hotswap was sold. **Firmware files from one, will not work on the other.** Please use the `.hex` appropriate for your board. +A 65% keyboard sold in three variants. +1. Rev1: Typical keyboard that had to be soldered together, supporting multiple layouts. +2. HotSwap: Released in late 2018, Hotswap single layout keyboard. +3. Rev2: Released in April/May 2019, the Rev2 also needs to be soldered together and supports multiple layouts. -The rev1 PCB for the KBD67 is sold under the name "KBD65." + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` appropriate for your board. + +The rev1 PCB is sold under the name "KBD65". Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: KBD67 -Hardware Availability: KBDFans +Hardware Supported: KBD67 rev1, rev2, hotswap +Hardware Availability: KBDFans -Make example for this keyboard (after setting up your build environment): +Make examples for this keyboard (after setting up your build environment): make kbdfans/kbd67/rev1:default + make kbdfans/kbd67/rev2:default make kbdfans/kbd67/hotswap:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd67/rev1/config.h b/keyboards/kbdfans/kbd67/rev1/config.h index a98687569..7a26192f4 100644 --- a/keyboards/kbdfans/kbd67/rev1/config.h +++ b/keyboards/kbdfans/kbd67/rev1/config.h @@ -75,7 +75,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd67/rev1/readme.md b/keyboards/kbdfans/kbd67/rev1/readme.md index 9074557cb..1d92a41f7 100644 --- a/keyboards/kbdfans/kbd67/rev1/readme.md +++ b/keyboards/kbdfans/kbd67/rev1/readme.md @@ -1,4 +1,4 @@ -# kbd67 +# KBD67 rev1 65% keyboard with blocker. @@ -8,6 +8,6 @@ Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming Make example for this keyboard (after setting up your build environment): - make kbd67/rev1:default + make kbdfans/kbd67/rev1:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd67/rev2/config.h b/keyboards/kbdfans/kbd67/rev2/config.h new file mode 100644 index 000000000..d4e200fa8 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/config.h @@ -0,0 +1,64 @@ +/* +Copyright 2019 Vorror + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KBDFans +#define PRODUCT KBD67v2 +#define DESCRIPTION 65% Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +#define MATRIX_ROW_PINS { B7, D0, F0, F1, F4 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, D1, D2, D3, D6, D7, B4, B6, C6, C7, F7, F6, F5 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ +#define BACKLIGHT_PIN B5 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 20 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 240 +#endif diff --git a/keyboards/kbdfans/kbd67/rev2/info.json b/keyboards/kbdfans/kbd67/rev2/info.json new file mode 100644 index 000000000..4b7b5e8b3 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "kbd67v2", + "url": "", + "maintainer": "qmk", + "width": 16, + "height": 5, + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":2.75}, {"x":6.5, "y":4, "w":1.25}, {"x":7.75, "y":4, "w":2.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + }, + + "LAYOUT_65_ansi": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + } + } +} diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/default/config.h b/keyboards/kbdfans/kbd67/rev2/keymaps/default/config.h new file mode 100644 index 000000000..a3ed4f762 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2018 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +// place overrides here diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/default/keymap.c b/keyboards/kbdfans/kbd67/rev2/keymaps/default/keymap.c new file mode 100644 index 000000000..13a8a420d --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/default/keymap.c @@ -0,0 +1,99 @@ +/* Copyright 2018 'mechmerlin' + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + QMKBEST = SAFE_RANGE, + QMKURL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap (Base Layer) Default Layer + * ,----------------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Home| + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |PgUp| + * |----------------------------------------------------------------| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return |PgDn| + * |----------------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift | Up|End | + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt| FN|Ctrl|Lef|Dow|Rig | + * `----------------------------------------------------------------' + */ +[0] = LAYOUT_65_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap Fn Layer + * ,----------------------------------------------------------------. + * |~ `|F1 |F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del |Ins | + * |----------------------------------------------------------------| + * |Caps | |Up | | | | | |PSc|SLk|Pau|Up | | | | + * |----------------------------------------------------------------| + * | |Lef|Dow|Rig| | | | |Hom|PUp|Lef|Rig| | | + * |----------------------------------------------------------------| + * | | | | | | | | |End|PDn|Dow| |PUp| | + * |----------------------------------------------------------------| + * | | | | | | | |Hom|PDn|End | + * `----------------------------------------------------------------' + */ +[1] = LAYOUT_65_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL,KC_INS, \ + KC_CAPS,_______, KC_UP,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS, KC_UP,_______, _______,_______, \ + _______,KC_LEFT,KC_DOWN,KC_RGHT,_______,_______,_______,_______,KC_HOME,KC_PGUP,KC_LEFT,KC_RGHT, _______,_______, \ + _______,_______,_______,_______,_______,_______,_______,_______, KC_END,KC_PGDN,KC_DOWN, _______,KC_PGUP,_______, \ + _______, _______, _______, _______, _______,_______,_______,KC_HOME,KC_PGDN, KC_END), + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QMKBEST: + if (record->event.pressed) { + // when keycode QMKBEST is pressed + SEND_STRING("QMK is the best thing ever!"); + } else { + // when keycode QMKBEST is released + } + break; + case QMKURL: + if (record->event.pressed) { + // when keycode QMKURL is pressed + SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER)); + } else { + // when keycode QMKURL is released + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/default/readme.md b/keyboards/kbdfans/kbd67/rev2/keymaps/default/readme.md new file mode 100644 index 000000000..2cb43c5e1 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for kbd67 diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/koba/config.h b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/config.h new file mode 100644 index 000000000..f4d7de06e --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/config.h @@ -0,0 +1,17 @@ +/* Copyright 2019 Daisuke Kobayashi + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/koba/keymap.c b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/keymap.c new file mode 100644 index 000000000..b00805e9e --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/keymap.c @@ -0,0 +1,61 @@ +/* Copyright 2019 Daisuke Kobayashi + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +#define RGB_RMO RGB_RMOD + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap (Base Layer) Default Layer + * ,----------------------------------------------------------------. + * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| ^| \|BS |Del | + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| @| [| Ent |PgUp| + * |------------------------------------------------------. |----| + * |H/Z | A| S| D| F| G| H| J| K| L| ;| :| ]| |PgDn| + * |----------------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |PScr| + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Fn | Space |Alt |Ctrl| |Lef|Dow|Rig | + * `------------------------------------------------' `------------' + */ +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JP_CIRC, KC_JYEN, KC_BSPC, KC_DELT, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, JP_RBRC, KC_PGUP, \ + KC_ZKHK, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN, KC_ENT, KC_PGDN, \ + KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PSCR, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RCTL, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap Fn Layer + * ,----------------------------------------------------------------. + * |Rst| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | |Ins | + * |----------------------------------------------------------------| + * | |M- |M+ |RGB|H- |H+ | | |Prt|SLk|Pau| | | | | + * |------------------------------------------------------. |----| + * |Caps |Vo-|Vo+|Mut|S- |S+ | *| /|Hom|PUp| | | | | | + * |----------------------------------------------------------------| + * | |BL-|BL+|BL |V- |V+ | +| -|End|PDn| _| |PUp| | + * |----------------------------------------------------------------| + * | | | | Muhenkan | | Henkan |Kana|Menu| |Hom|PDn|End | + * `------------------------------------------------' `------------' + */ +[1] = LAYOUT_all( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX,_______,KC_INS, \ + _______, RGB_RMO,RGB_MOD,RGB_TOG,RGB_HUD,RGB_HUI,XXXXXXX,XXXXXXX,KC_PSCR,KC_SLCK,KC_PAUS,XXXXXXX,XXXXXXX,XXXXXXX, _______, \ + KC_CAPS, KC_VOLD,KC_VOLU,KC_MUTE,RGB_SAD,RGB_SAI,KC_PAST,KC_PSLS,KC_HOME,KC_PGUP,XXXXXXX,XXXXXXX, KC_PENT, _______, \ + _______,_______,BL_DEC, BL_INC, BL_TOGG,RGB_VAD,RGB_VAI,KC_PPLS,KC_PMNS,KC_END, KC_PGDN,JP_UNDS,_______, KC_PGUP,_______, \ + _______,_______,_______, KC_MHEN, _______, KC_HENK, KC_KANA,KC_APP, _______,KC_HOME,KC_PGDN,KC_END), +}; diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/koba/readme.md b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/readme.md new file mode 100644 index 000000000..b432436d4 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/koba/readme.md @@ -0,0 +1,7 @@ +# Koba's keymap for KBD67 + + + +- JIS layout. +- Fn layer is arranged like HHKB. +- 3 splitted space bar. (Space-Fn-Space) diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/config.h b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/config.h new file mode 100644 index 000000000..4f5147e66 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/config.h @@ -0,0 +1,18 @@ +#pragma once + +#undef MANUFACTURER +#undef PRODUCT +#undef DESCRIPTION + +#define MANUFACTURER Potato Inc. +#define PRODUCT Qt3.14 +#define DESCRIPTION Look, a keyboard! + +/* send tap key if no layer key was used even after tap delay */ +#define TAPPING_TERM 50 +#define RETRO_TAPPING + +/* turn off RGB when computer sleeps */ +#ifdef RGB_DI_PIN +#define RGBLIGHT_SLEEP +#endif
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/keymap.c b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/keymap.c new file mode 100644 index 000000000..7c6ef155b --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/keymap.c @@ -0,0 +1,90 @@ +#include QMK_KEYBOARD_H + +enum layers { + _QWERTY, + _FUNC, + _NUM +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Keymap (Base Layer) Default Layer + * ,----------------------------------------------------------------. + * |ENu| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BS |Del | + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| {| }| Ent |PgUp| + * |------------------------------------------------------. |----| + * |CapsFn| A| S| D| F| G| H| J| K| L| ;| '| #| |PgDn| + * |----------------------------------------------------------------| + * |Shift| \| Z| X| C| V| B| N| M| ,| .| /|Shift |Up |Fn | + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |Alt |Ctrl| |Lef|Dow|Rig | + * `------------------------------------------------' `------------' + */ + [_QWERTY] = LAYOUT_all( + LT(_NUM,KC_ESC),KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + LT(_FUNC,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(_FUNC), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT), + + /* Keymap Fn Layer + * ,----------------------------------------------------------------. + * | ` | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| |Ins | + * |----------------------------------------------------------------| + * | |TOG|M+ |H+ |S+ |V+ |Sp+| |Prt|SLk|Pau| | | |Home| + * |------------------------------------------------------. |----| + * | |VLK|M- |H- |S- |V+ |Sp-| | | | | | | |End | + * |----------------------------------------------------------------| + * | |BL |BL-|BL+|BRTG| | | | | | | |PUp| | + * |----------------------------------------------------------------| + * |Sleep|Reset| | C+A+D |C+A+I|Menu| |Hom|PDn|End | + * `------------------------------------------------' `------------' + */ + [_FUNC] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,_______,KC_INS, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,_______, KC_HOME, + _______, VLK_TOG, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD,_______,_______,_______,_______,_______, _______, KC_END, + _______,_______,BL_TOGG, BL_DEC, BL_INC, BL_BRTG,_______,_______,_______,_______,_______,_______,_______, KC_PGUP,_______, + KC_SLEP,RESET ,_______, LCA(KC_DEL), LCA(KC_DEL), LCA(KC_DEL), LCA(KC_INS),KC_APP, _______,KC_HOME,KC_PGDN,KC_END), + + /* Keymap Numpad Layer + * ,----------------------------------------------------------------. + * | | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| /| | | | + * |----------------------------------------------------------------| + * | | | | | | | | 4| 5| 6| *| | | | | + * |------------------------------------------------------. |----| + * | | | | | | | | 1| 2| 3| -| | | | | + * |----------------------------------------------------------------| + * | | |NLk| | | | | | 0| | | +| | | | + * |----------------------------------------------------------------| + * | | | | | | | | | | | + * `------------------------------------------------' `------------' + */ + [_NUM] = LAYOUT_all( + _______, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_0, KC_KP_SLASH, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_ASTERISK, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_MINUS, _______, _______, _______, + _______, _______, KC_NLCK, _______, _______, _______, _______, _______, KC_KP_0, _______, _______, KC_KP_PLUS, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______), + }; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + if (usb_led & (1 << USB_LED_CAPS_LOCK)) { + rgblight_enable_noeeprom(); + } else { + rgblight_disable_noeeprom(); + } +} diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/readme.md b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/readme.md new file mode 100644 index 000000000..1404ceed5 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/readme.md @@ -0,0 +1,9 @@ +# TuCZnak's modified layout + +This layout is made for the ISO configuration of KBD67 (KBD65 v2 PCB). +It has a base layer, numpad on LT and a combined +configuration / macro / media layer. + +Since the plate and PCB leak some underglow and the KBD67 case has no use +for it otherwise, containing no translucent parts, I've used the RGB OLEDs +as a capslock indicator. diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk new file mode 100644 index 000000000..277af2b17 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk @@ -0,0 +1,20 @@ +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd67/rev2/readme.md b/keyboards/kbdfans/kbd67/rev2/readme.md new file mode 100644 index 000000000..0909f781d --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/readme.md @@ -0,0 +1,13 @@ +# KBD67 rev2 + +65% pcb with blocker. Revision 2 (Manufactured after 05/01/19). + +Keyboard Maintainer: [Vorror](https://github.com/vorror) +Hardware Supported: KBD67v2 PCB (Sometimes sold under the name "KBD65") +Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb) + +Make example for this keyboard (after setting up your build environment): + + make kbdfans/kbd67/rev2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd67/rev2/rev2.c b/keyboards/kbdfans/kbd67/rev2/rev2.c new file mode 100644 index 000000000..8aa83f586 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/rev2.c @@ -0,0 +1,42 @@ +/* Copyright 2019 Vorror + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "rev2.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + led_set_user(usb_led); +} diff --git a/keyboards/kbdfans/kbd67/rev2/rev2.h b/keyboards/kbdfans/kbd67/rev2/rev2.h new file mode 100644 index 000000000..f27a00191 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/rev2.h @@ -0,0 +1,57 @@ +/* Copyright 2018 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \ + K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \ + K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, K3F, \ + K40, K41, K43, K44, K46, K48, K4A, K4B, K4C, K4D, K4E, K4F \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ + { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E, K3F }, \ + { K40, K41, KC_NO, K43, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E, K4F }, \ +} + +#define LAYOUT_65_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0F, \ + K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \ + K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, K3F, \ + K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E, K4F \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E, K0F }, \ + { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, K2F }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E, K3F }, \ + { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E, K4F }, \ +} + diff --git a/keyboards/kbdfans/kbd67/rev2/rules.mk b/keyboards/kbdfans/kbd67/rev2/rules.mk new file mode 100644 index 000000000..5e874a041 --- /dev/null +++ b/keyboards/kbdfans/kbd67/rev2/rules.mk @@ -0,0 +1,82 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) + +LAYOUTS = 65_ansi diff --git a/keyboards/kbdfans/kbd6x/config.h b/keyboards/kbdfans/kbd6x/config.h index d3f1ee82c..1ee31e569 100644 --- a/keyboards/kbdfans/kbd6x/config.h +++ b/keyboards/kbdfans/kbd6x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c b/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c index bb8ab6b9b..b348b0b7b 100644 --- a/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c +++ b/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c @@ -10,6 +10,7 @@ enum layers_keymap { }; void eeconfig_init_keymap(void) { + rgblight_sethsv(MODERN_DOLCH_RED.h, MODERN_DOLCH_RED.s, MODERN_DOLCH_RED.v); rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL); } @@ -56,20 +57,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ * │ │F1 │F2 │F3 │F4 │F5 │F6 │F7 │F8 │F9 │F10│F11│F12│PSc│Ins│ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ - * │ │Hom│ ↑ │End│PgU│ │ │ │ │M1 │M↑ │M3 │M2 │ Del │ + * │ │Hom│ ↑ │End│PgU│ │ │ │ │M3 │M1 │M↑ │M2 │ Del │ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ - * │ │ ← │ ↓ │ → │PgD│ │ │ │MW↑│M← │M↓ │M→ │ │ + * │ │ ← │ ↓ │ → │PgD│ │ │ │ │MW↑│M← │M→ │ │ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ - * │ │Mut│Vo-│Vo+│Ply│Prv│Nxt│MW←│MW→│M4 │M5 │ │ │ + * │ │Mut│Vo-│Vo+│Ply│Prv│Nxt│App│MW←│MW→│M↓ │ │ │ * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘ * │ │ │ MW↓ │MAcl2│ │ * └───┴─────┴───────────────────────────┴─────┴───┘ */ [L_FN] = LAYOUT( _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, - _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN3, KC_BTN2, KC_DEL, - _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, KC_WH_U, KC_MS_L, KC_MS_D, KC_MS_R, _______, - _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_WH_L, KC_WH_R, KC_BTN4, KC_BTN5, _______, _______, + _______, KC_HOME, KC_UP, KC_END, KC_PGUP, _______, _______, _______, _______, KC_BTN3, KC_BTN1, KC_MS_U, KC_BTN2, KC_DEL, + _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, _______, KC_WH_U, KC_MS_L, KC_MS_R, _______, + _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPLY, KC_MPRV, KC_MNXT, KC_APP, KC_WH_L, KC_WH_R, KC_MS_D, _______, _______, XXXXXXX, _______, _______, KC_WH_D, KC_ACL2, _______, XXXXXXX ), @@ -81,7 +82,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ * │ │Mv←│Mv↓│Mv→│TNx│ │ │ │ │ │ │ │ │ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ - * │ │RTg│RV-│RV+│ │ │ │ │ │ │ │ │ │ + * │ │RTg│RV-│RV+│RMd│ │ │ │M4 │M5 │ │ │ │ * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘ * │DPR│DstNA│ │ │ │ * └───┴─────┴───────────────────────────┴─────┴───┘ @@ -90,7 +91,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, CLEAR, _______, TOP, MV_UP, BOTTOM, TAB_PRV, _______, _______, _______, _______, _______, _______, _______, _______, DEL_NXT, _______, MV_LEFT, MV_DOWN, MV_RGHT, TAB_NXT, _______, _______, _______, _______, _______, _______, _______, _______, - _______, RGB_TOG, RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_VAD, RGB_VAI, RGB_MOD, _______, _______, _______, KC_BTN4, KC_BTN5, _______, _______, _______, XXXXXXX, DST_P_R, DST_N_A, _______, _______, _______, XXXXXXX ), }; diff --git a/keyboards/kbdfans/kbd75/config.h b/keyboards/kbdfans/kbd75/config.h index 6f0cd86de..611e682e5 100644 --- a/keyboards/kbdfans/kbd75/config.h +++ b/keyboards/kbdfans/kbd75/config.h @@ -30,7 +30,7 @@ #endif /* Set 0 if debouncing isn't needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/kbdfans/kbd75/keymaps/tucznak/config.h b/keyboards/kbdfans/kbd75/keymaps/tucznak/config.h new file mode 100644 index 000000000..54960f7d1 --- /dev/null +++ b/keyboards/kbdfans/kbd75/keymaps/tucznak/config.h @@ -0,0 +1,26 @@ +#pragma once + +#undef MANUFACTURER +#undef PRODUCT +#undef DESCRIPTION + +#define MANUFACTURER Potato Inc. +#define PRODUCT Qt3.14 +#define DESCRIPTION Look, a keyboard! + +/* send tap key if no layer key was used even after tap delay */ +#define TAPPING_TERM 250 +#define RETRO_TAPPING + +/* turn off RGB when computer sleeps */ +#ifdef RGB_DI_PIN +#define RGBLIGHT_SLEEP +#endif + +/* number of backlight levels */ +#ifdef BACKLIGHT_LEVELS +#undef BACKLIGHT_LEVELS +#endif +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 8 +#endif diff --git a/keyboards/kbdfans/kbd75/keymaps/tucznak/keymap.c b/keyboards/kbdfans/kbd75/keymaps/tucznak/keymap.c new file mode 100644 index 000000000..ad3b6f6c5 --- /dev/null +++ b/keyboards/kbdfans/kbd75/keymaps/tucznak/keymap.c @@ -0,0 +1,90 @@ +#include QMK_KEYBOARD_H + +enum layers { + _QWERTY, + _FUNC, + _NUMPAD +}; + +enum keycodes { + QWERTY = SAFE_RANGE, + FUNC, + NUMPAD, + MACRO1, + MACRO2, + MACROTAB, + DYNAMIC_MACRO_RANGE, +}; + +#include "dynamic_macro.h" + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_QWERTY] = LAYOUT_ansi_1u( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, KC_PSCR, + LT(_NUMPAD, KC_GRV), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FUNC), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FUNC] = LAYOUT_ansi_1u( + RESET, KC_MPLY, KC_MPRV, KC_MNXT, KC_MSTP, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, + KC_TRNS, MACRO1, MACRO2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + MACROTAB, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NUBS, KC_TRNS, + KC_TRNS, VLK_TOG, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, DYN_REC_START2, DYN_MACRO_PLAY2, KC_TRNS, KC_TRNS, + KC_TRNS, BL_TOGG, BL_DEC, BL_INC, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, DYN_REC_STOP, DYN_REC_START1, DYN_MACRO_PLAY1, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, LCA(KC_DEL), KC_TRNS, KC_TRNS, KC_APP, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_NUMPAD] = LAYOUT_ansi_1u( + KC_NUMLOCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_0, KC_KP_SLASH, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_ASTERISK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_MINUS, KC_TRNS, KC_KP_ENTER, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_KP_0, KC_COMM, KC_DOT, KC_KP_PLUS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (!process_record_dynamic_macro(keycode, record)) { + return false; + } + + switch (keycode) { + case MACRO1: + if (record->event.pressed) { + SEND_STRING(SS_LCTRL("c") SS_DOWN(X_LALT) SS_TAP(X_TAB) SS_UP(X_LALT) SS_LCTRL("v") SS_TAP(X_TAB)); + _delay_ms(50); + SEND_STRING(SS_DOWN(X_LALT) SS_TAP(X_TAB) SS_UP(X_LALT) SS_TAP(X_TAB)); + } else { + + } + break; + case MACRO2: + if (record->event.pressed) { + SEND_STRING("GGWP"); + } else { + + } + break; + case MACROTAB: + if (record->event.pressed) { + SEND_STRING(" "); + } else { + + } + break; + } + + return true; +} + +void led_set_user(uint8_t usb_led) { + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + setPinOutput(B2); + writePinLow(B2); + } else { + setPinInput(B2); + writePinLow(B2); + } +} diff --git a/keyboards/kbdfans/kbd75/keymaps/tucznak/readme.md b/keyboards/kbdfans/kbd75/keymaps/tucznak/readme.md new file mode 100644 index 000000000..962125844 --- /dev/null +++ b/keyboards/kbdfans/kbd75/keymaps/tucznak/readme.md @@ -0,0 +1,5 @@ +# TuCZnak's modified layout + +This layout is made for the ANSI configuration of KBD75. +It has a base layer, numpad on LT and a combined +configuration / macro / media layer. diff --git a/keyboards/kbdfans/kbd75/keymaps/tucznak/rules.mk b/keyboards/kbdfans/kbd75/keymaps/tucznak/rules.mk new file mode 100644 index 000000000..7d6400f97 --- /dev/null +++ b/keyboards/kbdfans/kbd75/keymaps/tucznak/rules.mk @@ -0,0 +1,14 @@ +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +VELOCIKEY_ENABLE = yes # RGB memes for quickscoping teens +AUDIO_ENABLE = no +RGBLIGHT_ENABLE = yes
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd8x/config.h b/keyboards/kbdfans/kbd8x/config.h index 2cae29626..bdd310440 100644 --- a/keyboards/kbdfans/kbd8x/config.h +++ b/keyboards/kbdfans/kbd8x/config.h @@ -62,7 +62,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCING_DELAY 5 +#define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST diff --git a/keyboards/kbdfans/kbd8x_mk2/config.h b/keyboards/kbdfans/kbd8x_mk2/config.h new file mode 100644 index 000000000..4c6900b6c --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/config.h @@ -0,0 +1,251 @@ +/* +Copyright 2019 Ryota Goto + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA103 +#define PRODUCT_ID 0x0005 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KBDfans +#define PRODUCT KBD8X-MKII +#define DESCRIPTION TKL Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, B0, B1 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 + +#define RGB_DI_PIN B3 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/kbdfans/kbd8x_mk2/info.json b/keyboards/kbdfans/kbd8x_mk2/info.json new file mode 100644 index 000000000..06d69efe8 --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/info.json @@ -0,0 +1,103 @@ +{ + "keyboard_name": "kbd8x_mk2", + "url": "https://kb.ai03.me/projects/kbd8x-mkii.html", + "maintainer": "ai03", + "width": 18.25, + "height": 6.25, + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + {"label":"~", "x":0, "y":1.25}, + {"label":"!", "x":1, "y":1.25}, + {"label":"@", "x":2, "y":1.25}, + {"label":"#", "x":3, "y":1.25}, + {"label":"$", "x":4, "y":1.25}, + {"label":"%", "x":5, "y":1.25}, + {"label":"^", "x":6, "y":1.25}, + {"label":"&", "x":7, "y":1.25}, + {"label":"*", "x":8, "y":1.25}, + {"label":"(", "x":9, "y":1.25}, + {"label":")", "x":10, "y":1.25}, + {"label":"_", "x":11, "y":1.25}, + {"label":"+", "x":12, "y":1.25}, + {"label":"Back Space", "x":13, "y":1.25}, + {"label":"Delete", "x":14, "y":1.25}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"{", "x":11.5, "y":2.25}, + {"label":"}", "x":12.5, "y":2.25}, + {"label":"|", "x":13.5, "y":2.25, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":":", "x":10.75, "y":3.25}, + {"label":"\"", "x":11.75, "y":3.25}, + {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, + {"label":"Shift", "x":0, "y":4.25, "w":1.25}, + {"label":"|", "x":1.25, "y":4.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":"<", "x":9.25, "y":4.25}, + {"label":">", "x":10.25, "y":4.25}, + {"label":"?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, + {"label":"Fn", "x":14, "y":4.25}, + {"label":"\u2191", "x":16.25, "y":4.25}, + {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"label":"Alt", "x":10, "y":5.25, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + } + } +}
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd8x_mk2/kbd8x_mk2.c b/keyboards/kbdfans/kbd8x_mk2/kbd8x_mk2.c new file mode 100644 index 000000000..147270723 --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/kbd8x_mk2.c @@ -0,0 +1,71 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "kbd8x_mk2.h" + +void matrix_init_kb(void) { + + // Indicator pins + // B2 - Scroll Lock + // E6 - Caps Lock + // Sinking setup - 5V -> LED/Resistor -> Pin + + setPinOutput(B2); + setPinOutput(E6); + + matrix_init_user(); +} + +void led_set_kb(uint8_t usb_led) { + + // Toggle indicator LEDs + // Since they are a sinking setup, write HIGH to DISABLE, LOW to ENABLE + + if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { + writePinLow(E6); + } else { + writePinHigh(E6); + } + + if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) { + writePinLow(B2); + } else { + writePinHigh(B2); + } + + led_set_user(usb_led); +} + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +/* + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +*/ diff --git a/keyboards/kbdfans/kbd8x_mk2/kbd8x_mk2.h b/keyboards/kbdfans/kbd8x_mk2/kbd8x_mk2.h new file mode 100644 index 000000000..86d8b35ea --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/kbd8x_mk2.h @@ -0,0 +1,51 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K000, K001, K011, K002, K012, K003, K013, K004, K014, K005, K015, K006, K016, K007, K017, K008, \ + K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K066, K027, K037, K028, \ + K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056, K047, K057, K048, \ + K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K076, \ + K080, K090, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K086, K096, K097, \ + K100, K110, K101, K103, K105, K115, K106, K116, K107, K117, K108 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \ + { KC_NO, K011, K012, K013, K014, K015, K016, K017, KC_NO }, \ + { K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \ + { K030, K031, K032, K033, K034, K035, K036, K037, KC_NO }, \ + { K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \ + { K050, K051, K052, K053, K054, K055, K056, K057, KC_NO }, \ + { K060, K061, K062, K063, K064, K065, K066, KC_NO, KC_NO }, \ + { K070, K071, K072, K073, K074, K075, K076, KC_NO, KC_NO }, \ + { K080, K081, K082, K083, K084, K085, K086, KC_NO, KC_NO }, \ + { K090, K091, K092, K093, K094, K095, K096, K097, KC_NO }, \ + { K100, K101, KC_NO, K103, KC_NO, K105, K106, K107, K108 }, \ + { K110, KC_NO, KC_NO, KC_NO, KC_NO, K115, K116, K117, KC_NO } \ +} + + diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/ai03/keymap.c b/keyboards/kbdfans/kbd8x_mk2/keymaps/ai03/keymap.c new file mode 100644 index 000000000..f651f2f0b --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/ai03/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_LGUI, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_GRV, BL_TOGG, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( /* Base */ + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_BSPC, _______, _______, _______, \ + KC_CAPS, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, \ + _______, KC_HOME, KC_PGDN, KC_END, _______, KC_VOLD, KC_VOLU, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, _______, KC_PGUP, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/ai03/readme.md b/keyboards/kbdfans/kbd8x_mk2/keymaps/ai03/readme.md new file mode 100644 index 000000000..d48343e70 --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/ai03/readme.md @@ -0,0 +1,4 @@ +# The ai03 keymap for KBD8X MKII + +A strange layout that focuses functionality into the alphanumerics cluster. +Fn row and further keys effectively become nothing more than decoration.
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_625/keymap.c b/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_625/keymap.c new file mode 100644 index 000000000..69d04852c --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_625/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_625/readme.md b/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_625/readme.md new file mode 100644 index 000000000..87527897d --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_625/readme.md @@ -0,0 +1,3 @@ +# The ANSI 6.25U keymap for KBD8X MKII + +A typical setup for the 1.25/6.25U bottom row.
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_7/keymap.c b/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_7/keymap.c new file mode 100644 index 000000000..99496e21f --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_7/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_7/readme.md b/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_7/readme.md new file mode 100644 index 000000000..c0f5b8629 --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/ansi_7/readme.md @@ -0,0 +1,3 @@ +# The ANSI WKL keymap for KBD8X MKII + +A typical setup for the 1.5/7U bottom row.
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/default/keymap.c b/keyboards/kbdfans/kbd8x_mk2/keymaps/default/keymap.c new file mode 100644 index 000000000..1064c141d --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/default/readme.md b/keyboards/kbdfans/kbd8x_mk2/keymaps/default/readme.md new file mode 100644 index 000000000..287ee702a --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/default/readme.md @@ -0,0 +1,4 @@ +# The default keymap for KBD8X MKII + +A typical setup. Nothing special. +A nice starting point for customizing. diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_625/keymap.c b/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_625/keymap.c new file mode 100644 index 000000000..01c4a03af --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_625/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NUHS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_ALGR, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_625/readme.md b/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_625/readme.md new file mode 100644 index 000000000..38760b7ad --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_625/readme.md @@ -0,0 +1,3 @@ +# The ISO 6.25U keymap for KBD8X MKII + +A typical setup for an ISO layout using 1.25/6.25U bottom row.
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_7/keymap.c b/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_7/keymap.c new file mode 100644 index 000000000..4087b5984 --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_7/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NUHS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_NO, KC_ALGR, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_7/readme.md b/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_7/readme.md new file mode 100644 index 000000000..2f0eb1961 --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/iso_7/readme.md @@ -0,0 +1,3 @@ +# The ISO 7U keymap for KBD8X MKII + +A typical setup for an ISO layout using 1.5/7U bottom row.
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/tester/keymap.c b/keyboards/kbdfans/kbd8x_mk2/keymaps/tester/keymap.c new file mode 100644 index 000000000..dc742bcfa --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/tester/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + + KC_ESC, KC_CAPS, KC_SLCK, BL_TOGG, BL_STEP, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_DEL, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kbdfans/kbd8x_mk2/keymaps/tester/readme.md b/keyboards/kbdfans/kbd8x_mk2/keymaps/tester/readme.md new file mode 100644 index 000000000..3de082bed --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/keymaps/tester/readme.md @@ -0,0 +1,18 @@ +# The tester keymap for KBD8X MKII + +Sets the fn row to LED toggling (caps lock, scroll lock, RGB underglow, backlight). + +F1 = Caps Lock +F2 = Scroll Lock +F3 = Backlight Toggle +F4 = Backlight Step + +F5 = RGB Toggle +F6 = RGB Mode Cycle +F7 = RGB Hue Increase +F8 = RGB Hue Decrease + +F9 = RGB Saturation Increase +F10 = RGB Saturation Decrease +F11 = RGB Value Increase +F12 = RGB Value Decrease
\ No newline at end of file diff --git a/keyboards/kbdfans/kbd8x_mk2/readme.md b/keyboards/kbdfans/kbd8x_mk2/readme.md new file mode 100644 index 000000000..3655ac1c7 --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/readme.md @@ -0,0 +1,15 @@ +# KBD8X MKII + + + +A fairly typical TKL + +Keyboard Maintainer: [ai03](https://github.com/ai03-2725) / [KBDfans](https://kbdfans.cn/) +Hardware Supported: KBD8X MKII PCB/case +Hardware Availability: [KBDfans](https://kbdfans.cn/collections/new-arrival/products/coming-soon-kbd8x-mkii-custom-mechanical-keyboard-kit) + +Make example for this keyboard (after setting up your build environment): + + make kbdfans/kbd8x_mk2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd8x_mk2/rules.mk b/keyboards/kbdfans/kbd8x_mk2/rules.mk new file mode 100644 index 000000000..43e0dcf40 --- /dev/null +++ b/keyboards/kbdfans/kbd8x_mk2/rules.mk @@ -0,0 +1,80 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) diff --git a/keyboards/kbdfans/kbdpad_mk2/config.h b/keyboards/kbdfans/kbdpad_mk2/config.h new file mode 100644 index 000000000..e3b91e1a1 --- /dev/null +++ b/keyboards/kbdfans/kbdpad_mk2/config.h @@ -0,0 +1,251 @@ +/* +Copyright 2019 Ryota Goto + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA103 +#define PRODUCT_ID 0x0006 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KBDfans +#define PRODUCT KBDPAD-MKII +#define DESCRIPTION Numpad + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D3, D1, D2, C6, C7, B6 } +#define MATRIX_COL_PINS { C4, C5, B3, B2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN B7 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 + +#define RGB_DI_PIN B5 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 16 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ + #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/kbdfans/kbdpad_mk2/info.json b/keyboards/kbdfans/kbdpad_mk2/info.json new file mode 100644 index 000000000..50cfc871d --- /dev/null +++ b/keyboards/kbdfans/kbdpad_mk2/info.json @@ -0,0 +1,37 @@ +{ + "keyboard_name": "kbdpad_mk2", + "url": "https://kb.ai03.me/projects/kbdpad-mkii.html", + "maintainer": "ai03", + "width": 4, + "height": 6.25, + "layouts": { + "LAYOUT_ortho_6x4": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":0, "y":2.25}, + {"x":1, "y":2.25}, + {"x":2, "y":2.25}, + {"x":3, "y":2.25}, + {"x":0, "y":3.25}, + {"x":1, "y":3.25}, + {"x":2, "y":3.25}, + {"x":3, "y":3.25}, + {"x":0, "y":4.25}, + {"x":1, "y":4.25}, + {"x":2, "y":4.25}, + {"x":3, "y":4.25}, + {"x":0, "y":5.25}, + {"x":1, "y":5.25}, + {"x":2, "y":5.25}, + {"x":3, "y":5.25} + ] + } + } +} diff --git a/keyboards/kbdfans/kbdpad_mk2/kbdpad_mk2.c b/keyboards/kbdfans/kbdpad_mk2/kbdpad_mk2.c new file mode 100644 index 000000000..3ca8e0c73 --- /dev/null +++ b/keyboards/kbdfans/kbdpad_mk2/kbdpad_mk2.c @@ -0,0 +1,61 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "kbdpad_mk2.h" + +void matrix_init_kb(void) { + + // Num Lock LED = B4 + // Sinking setup (5V -> LED/Res -> Pin) + + setPinOutput(B4); + + matrix_init_user(); +} + +void led_set_kb(uint8_t usb_led) { + + // Sinking setup. Write HIGH to turn OFF, LOW to turn ON. + + if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) { + writePinLow(B4); + } else { + writePinHigh(B4); + } + + led_set_user(usb_led); +} + +// Optional override functions below. +// You can leave any or all of these undefined. +// These are only required if you want to perform custom actions. + +/* + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +*/ diff --git a/keyboards/kbdfans/kbdpad_mk2/kbdpad_mk2.h b/keyboards/kbdfans/kbdpad_mk2/kbdpad_mk2.h new file mode 100644 index 000000000..328aeaac9 --- /dev/null +++ b/keyboards/kbdfans/kbdpad_mk2/kbdpad_mk2.h @@ -0,0 +1,43 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_ortho_6x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33, \ + K40, K41, K42, K43, \ + K50, K51, K52, K53 \ +) \ +{ \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 }, \ + { K40, K41, K42, K43 }, \ + { K50, K51, K52, K53 } \ +} diff --git a/keyboards/kbdfans/kbdpad_mk2/keymaps/default/keymap.c b/keyboards/kbdfans/kbdpad_mk2/keymaps/default/keymap.c new file mode 100644 index 000000000..841db90ca --- /dev/null +++ b/keyboards/kbdfans/kbdpad_mk2/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_6x4( /* Base */ + KC_ESC, KC_LCTL, KC_LALT, KC_BSPC, \ + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, KC_PPLS, \ + KC_P4, KC_P5, KC_P6, KC_PPLS, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, KC_P0, KC_PDOT, KC_PENT \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kbdfans/kbdpad_mk2/keymaps/default/readme.md b/keyboards/kbdfans/kbdpad_mk2/keymaps/default/readme.md new file mode 100644 index 000000000..71ff8e002 --- /dev/null +++ b/keyboards/kbdfans/kbdpad_mk2/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# The default keymap for KBDPAD MKII + +Just a numpad. Top row from Cherry G80-3700
\ No newline at end of file diff --git a/keyboards/kbdfans/kbdpad_mk2/keymaps/tester/keymap.c b/keyboards/kbdfans/kbdpad_mk2/keymaps/tester/keymap.c new file mode 100644 index 000000000..04c301fee --- /dev/null +++ b/keyboards/kbdfans/kbdpad_mk2/keymaps/tester/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2019 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_6x4( /* Base */ + BL_TOGG, BL_STEP, RGB_TOG, RGB_MOD, \ + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ + KC_P7, KC_P8, KC_P9, KC_PPLS, \ + KC_P4, KC_P5, KC_P6, KC_PPLS, \ + KC_P1, KC_P2, KC_P3, KC_PENT, \ + KC_P0, KC_P0, KC_PDOT, KC_PENT \ + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} diff --git a/keyboards/kbdfans/kbdpad_mk2/keymaps/tester/readme.md b/keyboards/kbdfans/kbdpad_mk2/keymaps/tester/readme.md new file mode 100644 index 000000000..3cd1e9b67 --- /dev/null +++ b/keyboards/kbdfans/kbdpad_mk2/keymaps/tester/readme.md @@ -0,0 +1,9 @@ +# The testing keymap for KBDPAD MKII + +Turns top row into LED tester. + +From left to right: +Backlight Toggle +Backlight Step +RGB Toggle +RGB Mode Cycle
\ No newline at end of file diff --git a/keyboards/kbdfans/kbdpad_mk2/readme.md b/keyboards/kbdfans/kbdpad_mk2/readme.md new file mode 100644 index 000000000..7736019bb --- /dev/null +++ b/keyboards/kbdfans/kbdpad_mk2/readme.md @@ -0,0 +1,15 @@ +# KBDPAD MKII + + + +A simple numpad + +Keyboard Maintainer: [ai03](https://github.com/ai03-2725)/[KBDfans](https://kbdfans.cn/) +Hardware Supported: The KBDPAD MKII PCB/case +Hardware Availability: [KBDfans](https://kbdfans.cn/products/gb-kbdpad-mkii-mechanical-keyboard-kit) + +Make example for this keyboard (after setting up your build environment): + + make kbdfans/kbdpad_mk2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbdpad_mk2/rules.mk b/keyboards/kbdfans/kbdpad_mk2/rules.mk new file mode 100644 index 000000000..90614e940 --- /dev/null +++ b/keyboards/kbdfans/kbdpad_mk2/rules.mk @@ -0,0 +1,82 @@ +# MCU name +MCU = atmega32u2 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) + +LAYOUTS = ortho_6x4 |