diff options
Diffstat (limited to 'keyboards/ploopyco/trackball/readme.md')
-rw-r--r-- | keyboards/ploopyco/trackball/readme.md | 68 |
1 files changed, 68 insertions, 0 deletions
diff --git a/keyboards/ploopyco/trackball/readme.md b/keyboards/ploopyco/trackball/readme.md new file mode 100644 index 000000000..76b9d6a76 --- /dev/null +++ b/keyboards/ploopyco/trackball/readme.md @@ -0,0 +1,68 @@ +# Ploopyco Trackball + +![Ploopyco Trackball](https://i.redd.it/j7z0y83txps31.jpg) + +It's a DIY, QMK Powered Trackball!!!! + +Everything works. However the scroll wheel has some issues and acts very odd. + +* Keyboard Maintainer: [PloopyCo](https://github.com/ploopyco), [Drashna Jael're](https://github.com/drashna/), [Germ](https://github.com/germ/) +* Hardware Supported: ATMega32u4 8MHz(3.3v) +* Hardware Availability: [Store](https://ploopy.co), [GitHub](https://github.com/ploopyco) + +Make example for this keyboard (after setting up your build environment): + + make ploopyco/trackball:default:flash + +To jump to the bootloader, hold down "Button 4" (immediate right of the trackball) + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +# Customzing your PloopyCo Trackball + +While the defaults are designed so that it can be plugged in and used right away, there are a number of things that you may want to change. Such as adding DPI control, or to use the ball to scroll while holding a button. To allow for this sort of control, there is a callback for both the scroll wheel and the mouse censor. + +The default behavior for this is: + +```c +void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v) { + mouse_report->h = h; + mouse_report->v = v; +} + +void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y) { + mouse_report->x = x; + mouse_report->y = y; +} +``` + +This should allow you to more heavily customize the behavior. + +Alternatively, the `process_wheel` and `process_mouse` functions can both be replaced too, to allow for even more functionality. + +Additionally, you can change the DPI/CPI or speed of the trackball by calling `pmw_set_cpi` at any time. And tThe default can be changed by adding a define to the keymap's `config.h` file: + + #define PMW_CPI 1600 + +# Programming QMK-DFU onto the PloopyCo Trackball + +If you would rather have DFU on this board, you can use the QMK-DFU bootloader on the device. To do so, you want to run: + + make ploopyco/trackball:default:production + +Once you have that, you'll need to [ISP Flash](https://docs.qmk.fm/#/isp_flashing_guide) the chip with the new bootloader hex file created (or the production hex), and set the fuses: + + +| Fuse | Setting | +|----------|------------------| +| Low | `0xDF` | +| High | `0xD8` or `0x98` | +| Extended | `0xCB` | + +Original (Caterina) settings: + +| Fuse | Setting | +|----------|------------------| +| Low | `0xFF` | +| High | `0xD8` | +| Extended | `0xFE` | |