diff options
Diffstat (limited to 'keyboards/rgbkb/sol/keymaps')
| -rw-r--r-- | keyboards/rgbkb/sol/keymaps/brianweyer/rules.mk | 45 | ||||
| -rw-r--r-- | keyboards/rgbkb/sol/keymaps/danielhklein/rules.mk | 44 | ||||
| -rw-r--r-- | keyboards/rgbkb/sol/keymaps/default/keymap.c | 350 | ||||
| -rw-r--r-- | keyboards/rgbkb/sol/keymaps/default/readme.md | 4 | ||||
| -rw-r--r-- | keyboards/rgbkb/sol/keymaps/default/rules.mk | 40 | ||||
| -rw-r--r-- | keyboards/rgbkb/sol/keymaps/kageurufu/rules.mk | 51 | ||||
| -rw-r--r-- | keyboards/rgbkb/sol/keymaps/xulkal/rules.mk | 48 |
7 files changed, 266 insertions, 316 deletions
diff --git a/keyboards/rgbkb/sol/keymaps/brianweyer/rules.mk b/keyboards/rgbkb/sol/keymaps/brianweyer/rules.mk index 12c877946..47dd9a7e2 100644 --- a/keyboards/rgbkb/sol/keymaps/brianweyer/rules.mk +++ b/keyboards/rgbkb/sol/keymaps/brianweyer/rules.mk @@ -1,38 +1,15 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) - -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix -RGBLIGHT_ANIMATIONS = yes # LED animations -LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) -RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) -RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -OLED_DRIVER_ENABLE = yes # Enable the OLED Driver (+5000) -IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) +# Overridden build options from rev1 + +# RGB Options +LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) + +# Misc +OLED_DRIVER_ENABLE = yes # Enable the OLED Driver -# Do not edit past here -ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE -else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) - OPT_DEFS += -DRGBLIGHT_FULL_POWER -endif -ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) - OPT_DEFS += -DRGB_MATRIX_KEYPRESSES -endif -ifeq ($(strip $(LED_MIRRORED)), yes) - OPT_DEFS += -DLED_MIRRORED -endif + +# Do not edit past here + +include keyboards/$(KEYBOARD)/post_rules.mk diff --git a/keyboards/rgbkb/sol/keymaps/danielhklein/rules.mk b/keyboards/rgbkb/sol/keymaps/danielhklein/rules.mk index 09b0e201d..2993bdacc 100644 --- a/keyboards/rgbkb/sol/keymaps/danielhklein/rules.mk +++ b/keyboards/rgbkb/sol/keymaps/danielhklein/rules.mk @@ -1,38 +1,14 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) - -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix -RGBLIGHT_ANIMATIONS = yes # LED animations -LED_MIRRORED = yes # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) -RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) -RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000) -IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) +# Overridden build options from rev1 + +# Debug Options +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration + -# Do not edit past here -ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE -else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) - OPT_DEFS += -DRGBLIGHT_FULL_POWER -endif -ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) - OPT_DEFS += -DRGB_MATRIX_KEYPRESSES -endif -ifeq ($(strip $(LED_MIRRORED)), yes) - OPT_DEFS += -DLED_MIRRORED -endif +# Do not edit past here + +include keyboards/$(KEYBOARD)/post_rules.mk + diff --git a/keyboards/rgbkb/sol/keymaps/default/keymap.c b/keyboards/rgbkb/sol/keymaps/default/keymap.c index ca7352482..f948dc450 100644 --- a/keyboards/rgbkb/sol/keymaps/default/keymap.c +++ b/keyboards/rgbkb/sol/keymaps/default/keymap.c @@ -5,13 +5,6 @@ #include "split_util.h" #endif -extern keymap_config_t keymap_config; - -#ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings -extern rgblight_config_t rgblight_config; -#endif - // Each layer gets a name for readability, which is then used in the keymap matrix below. // The underscores don't mean anything - you can have a layer called STUFF or any other name. // Layer names don't all need to be of the same length, obviously, and you can also skip them @@ -23,22 +16,18 @@ enum layer_number { _ADJ }; -enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - FN, - ADJ, - BACKLIT, - RGBRST -}; +// Keycode defines for layers +#define QWERTY DF(_QWERTY) +#define COLEMAK DF(_COLEMAK) +#define FN MO(_FN) +#define ADJ MO(_ADJ) -enum macro_keycodes { - KC_SAMPLEMACRO, +enum custom_keycodes { + RGBRST = SAFE_RANGE, + RGB_MENU }; - - -#define FN_ESC LT(_FN, KC_ESC) +#define FN_ESC LT(_FN, KC_ESC) #define FN_CAPS LT(_FN, KC_CAPS) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -50,9 +39,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| * |FN(CAPS)| A | S | D | F | G | ( | | ) | H | J | K | L | ; | ' | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * |Shift | Z | X | C | V | B | { | | } | N | M | , | . | / |Shift | + * |Shift | Z | X | C | V | B | { | | } | N | M | , | . | / |Enter | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right | + * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' * | Space| DEL | | Enter| Space| * `-------------' `-------------' @@ -74,7 +63,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| * |FN(CAPS)| A | R | S | T | G | ( | | ) | K | N | E | I | O | ' | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * |Shift | Z | X | C | D | V | { | | } | M | H | , | . | / |Shift | + * |Shift | Z | X | C | D | V | { | | } | M | H | , | . | / |Enter | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' @@ -83,9 +72,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_COLEMAK] = LAYOUT( \ KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, \ - FN_CAPS, KC_A, KC_R, KC_S, KC_T, KC_G, KC_LPRN, KC_RPRN, KC_K, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_D, KC_V, KC_LCBR, KC_RCBR, KC_M, KC_H, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_LBRC, KC_RBRC, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSLS, \ + FN_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D, KC_LPRN, KC_RPRN, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_RCBR, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ KC_LCTL, KC_LGUI, KC_LALT, RGB_TOG, ADJ, KC_SPC, KC_DEL, KC_ENT, KC_SPC, FN, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT, \ KC_SPC, KC_DEL, KC_ENT, KC_SPC \ ), @@ -107,8 +96,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_FN] = LAYOUT( \ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_PSCR, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ - _______, KC_PGDN, KC_UP, KC_PGUP, _______, _______, _______, _______, _______, KC_PGDN, KC_UP, KC_PGUP, KC_PSCR, KC_HOME, \ - _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \ + _______, KC_PGDN, KC_UP, KC_PGUP, _______, _______, _______, KC_SLCK, _______, KC_PGDN, KC_UP, KC_PGUP, KC_PSCR, KC_HOME, \ + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, KC_NLCK, _______, KC_LEFT, KC_DOWN, KC_RGHT, KC_INS, KC_END, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, \ _______, _______, _______, _______ \ @@ -134,120 +123,184 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \ _______, RGB_SAD, RGB_VAI, RGB_SAI, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ _______, RGB_HUD, RGB_VAD, RGB_HUI, RGBRST, _______, _______, _______, _______, QWERTY, COLEMAK, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ - _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \ + _______, RGB_SPD, _______, RGB_SPI, _______, _______, _______, _______, _______, RGB_SPI, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \ + _______, _______, _______, RGB_MOD, _______, _______, _______, _______, _______, RGB_SPD, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, \ _______, _______, _______, _______ \ ) }; +// For RGBRST Keycode +#if defined(RGB_MATRIX_ENABLE) +void rgb_matrix_increase_flags(void) +{ + switch (rgb_matrix_get_flags()) { + case LED_FLAG_ALL: { + rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER); + rgb_matrix_set_color_all(0, 0, 0); + } + break; + case LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER: { + rgb_matrix_set_flags(LED_FLAG_UNDERGLOW); + rgb_matrix_set_color_all(0, 0, 0); + } + break; + case LED_FLAG_UNDERGLOW: { + rgb_matrix_set_flags(LED_FLAG_NONE); + rgb_matrix_disable_noeeprom(); + } + break; + default: { + rgb_matrix_set_flags(LED_FLAG_ALL); + rgb_matrix_enable_noeeprom(); + } + break; + } +} +void rgb_matrix_decrease_flags(void) +{ + switch (rgb_matrix_get_flags()) { + case LED_FLAG_ALL: { + rgb_matrix_set_flags(LED_FLAG_NONE); + rgb_matrix_disable_noeeprom(); + } + break; + case LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER: { + rgb_matrix_set_flags(LED_FLAG_ALL); + rgb_matrix_set_color_all(0, 0, 0); + } + break; + case LED_FLAG_UNDERGLOW: { + rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER); + rgb_matrix_set_color_all(0, 0, 0); + } + break; + default: { + rgb_matrix_set_flags(LED_FLAG_UNDERGLOW); + rgb_matrix_enable_noeeprom(); + } + break; + } +} +#endif -// define variables for reactive RGB -bool TOG_STATUS = false; -int RGB_current_mode; +#ifdef RGB_OLED_MENU +uint8_t rgb_encoder_state = 4; + +typedef void (*rgb_matrix_f)(void); + +const rgb_matrix_f rgb_matrix_functions[6][2] = { + { rgb_matrix_increase_hue, rgb_matrix_decrease_hue }, + { rgb_matrix_increase_sat, rgb_matrix_decrease_sat }, + { rgb_matrix_increase_val, rgb_matrix_decrease_val }, + { rgb_matrix_increase_speed, rgb_matrix_decrease_speed }, + { rgb_matrix_step, rgb_matrix_step_reverse }, + { rgb_matrix_increase_flags, rgb_matrix_decrease_flags } +}; +#endif #ifdef ENCODER_ENABLE + +static pin_t encoders_pad_a[] = ENCODERS_PAD_A; +#define NUMBER_OF_ENCODERS (sizeof(encoders_pad_a)/sizeof(pin_t)) + +const uint16_t PROGMEM encoders[][NUMBER_OF_ENCODERS * 2][2] = { + [_QWERTY] = ENCODER_LAYOUT( \ + KC_VOLU, KC_VOLD, + KC_VOLU, KC_VOLD + ), + [_COLEMAK] = ENCODER_LAYOUT( \ + _______, _______, + _______, _______ + ), + [_FN] = ENCODER_LAYOUT( \ + _______, _______, + _______, _______ + ), + [_ADJ] = ENCODER_LAYOUT( \ + _______, _______, + _______, _______ + ) +}; + void encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { /* First encoder */ - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } else if (index == 1) { /* Second encoder*/ - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); + if (!is_keyboard_master()) + return; + +#ifdef RGB_OLED_MENU + if (index == RGB_OLED_MENU) { + (*rgb_matrix_functions[rgb_encoder_state][clockwise])(); + } else +#endif + { + uint8_t layer = biton32(layer_state); + uint16_t keycode = encoders[layer][index][clockwise]; + while (keycode == KC_TRANSPARENT && layer > 0) + { + layer--; + if ((layer_state & (1 << layer)) != 0) + keycode = encoders[layer][index][clockwise]; } + if (keycode != KC_TRANSPARENT) + tap_code16(keycode); } } #endif -// Setting ADJ layer RGB back to default -void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { - #ifdef RGBLIGHT_ENABLE - //rgblight_mode(RGB_current_mode); - #endif - layer_on(layer3); - } else { - layer_off(layer3); - } -} - bool process_record_user(uint16_t keycode, keyrecord_t *record) { - //uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); - + static uint16_t reset_timer; switch (keycode) { - case QWERTY: + case RGBRST: +#if defined(RGBLIGHT_ENABLE) + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + } +#elif defined(RGB_MATRIX_ENABLE) + if (record->event.pressed) { + eeconfig_update_rgb_matrix_default(); + } +#endif + return false; + case RESET: if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); + reset_timer = timer_read(); + } else { + if (timer_elapsed(reset_timer) >= 500) { + reset_keyboard(); + } } return false; - break; - case COLEMAK: - if(record->event.pressed) { - set_single_persistent_default_layer(_COLEMAK); +#if defined(RGB_MATRIX_ENABLE) && defined(KEYBOARD_rgbkb_sol_rev2) + case RGB_TOG: + if (record->event.pressed) { + rgb_matrix_increase_flags(); } return false; - break; - case FN: +#endif + case RGB_MENU: +#ifdef RGB_OLED_MENU if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + if (get_mods() & MOD_MASK_SHIFT) { + rgb_encoder_state = (rgb_encoder_state - 1); + if (rgb_encoder_state > 5) { + rgb_encoder_state = 5; + } } else { - TOG_STATUS = !TOG_STATUS; - #ifdef RGBLIGHT_ENABLE - //rgblight_mode(15); - #endif + rgb_encoder_state = (rgb_encoder_state + 1) % 6; } - layer_on(_FN); - } else { - #ifdef RGBLIGHT_ENABLE - //rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change - #endif - layer_off(_FN); - TOG_STATUS = false; } +#endif return false; - break; - case ADJ: - if (record->event.pressed) { - layer_on(_ADJ); - } else { - layer_off(_ADJ); - } - return false; - break; - //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released - case RGBRST: - #ifdef RGBLIGHT_ENABLE - if (record->event.pressed) { - eeconfig_update_rgblight_default(); - rgblight_enable(); - RGB_current_mode = rgblight_config.mode; - } - #endif - break; } return true; } -void matrix_init_user(void) { -#ifdef RGBLIGHT_ENABLE - RGB_current_mode = rgblight_config.mode; -#endif -} - - // OLED Driver Logic #ifdef OLED_DRIVER_ENABLE - oled_rotation_t oled_init_user(oled_rotation_t rotation) { - if (!has_usb()) - return OLED_ROTATION_180; // flip 180 for offhand + if (is_keyboard_master()) + return OLED_ROTATION_90; return rotation; } @@ -255,62 +308,63 @@ static void render_logo(void) { static const char PROGMEM sol_logo[] = { 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; - + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0 + }; oled_write_P(sol_logo, false); } -//assign the right code to your layers for OLED display -#define L_BASE 0 -#define L_FN (1<<_FN) -#define L_ADJ (1<<_ADJ) -#define L_ADJ_TRI (L_ADJ|L_FN) - static void render_status(void) { // Render to mode icon - static const char PROGMEM mode_logo[4][4] = { - {0x95,0x96,0x0a,0}, - {0xb5,0xb6,0x0a,0}, - {0x97,0x98,0x0a,0}, - {0xb7,0xb8,0x0a,0} }; - - if (keymap_config.swap_lalt_lgui != false) { - oled_write_P(mode_logo[0], false); - oled_write_P(mode_logo[1], false); - } else { - oled_write_P(mode_logo[2], false); - oled_write_P(mode_logo[3], false); - } - - // Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below - oled_write_P(PSTR("Layer: "), false); - switch (layer_state) { - case L_BASE: - oled_write_P(PSTR("Default\n"), false); + static const char PROGMEM sol_icon[] = { + 0x9b,0x9c,0x9d,0x9e,0x9f, + 0xbb,0xbc,0xbd,0xbe,0xbf, + 0xdb,0xdc,0xdd,0xde,0xdf,0 + }; + oled_write_P(sol_icon, false); + + // Define layers here + oled_write_P(PSTR("Layer"), false); + switch (biton32(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("BASE "), false); + break; + case _COLEMAK: + oled_write_P(PSTR("CLMK "), false); break; - case L_FN: - oled_write_P(PSTR("FN \n"), false); + case _FN: + oled_write_P(PSTR("FN "), false); break; - case L_ADJ: - case L_ADJ_TRI: - oled_write_P(PSTR("ADJ \n"), false); + case _ADJ: + oled_write_P(PSTR("ADJ "), false); break; default: - oled_write_P(PSTR("UNDEF \n"), false); + oled_write_P(PSTR("UNDEF"), false); } // Host Keyboard LED Status - uint8_t led_usb_state = host_keyboard_leds(); - oled_write_P(led_usb_state & (1<<USB_LED_NUM_LOCK) ? PSTR("NUMLOCK ") : PSTR(" "), false); - oled_write_P(led_usb_state & (1<<USB_LED_CAPS_LOCK) ? PSTR("CAPS ") : PSTR(" "), false); - oled_write_P(led_usb_state & (1<<USB_LED_SCROLL_LOCK) ? PSTR("SCLK ") : PSTR(" "), false); + uint8_t led_state = host_keyboard_leds(); + oled_write_P(PSTR("-----"), false); + oled_write_P(IS_LED_ON(led_state, USB_LED_NUM_LOCK) ? PSTR("NUMLK") : PSTR(" "), false); + oled_write_P(IS_LED_ON(led_state, USB_LED_CAPS_LOCK) ? PSTR("CAPLK") : PSTR(" "), false); + oled_write_P(IS_LED_ON(led_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLK") : PSTR(" "), false); + +#ifdef RGB_OLED_MENU + static char buffer[31] = { 0 }; + snprintf(buffer, sizeof(buffer), "h%3d s%3d v%3d s%3d m%3d e%3d ", rgb_matrix_config.hsv.h, rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v, rgb_matrix_config.speed, rgb_matrix_config.mode, rgb_matrix_get_flags()); + buffer[4 + rgb_encoder_state * 5] = '<'; + + oled_write_P(PSTR("-----"), false); + oled_write(buffer, false); +#endif } void oled_task_user(void) { - if (is_keyboard_master()) + if (is_keyboard_master()) { render_status(); - else + } else { render_logo(); + oled_scroll_left(); + } } #endif diff --git a/keyboards/rgbkb/sol/keymaps/default/readme.md b/keyboards/rgbkb/sol/keymaps/default/readme.md index 75182c06f..4a97a7bab 100644 --- a/keyboards/rgbkb/sol/keymaps/default/readme.md +++ b/keyboards/rgbkb/sol/keymaps/default/readme.md @@ -10,7 +10,7 @@ * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| * |FN(CAPS)| A | S | D | F | G | ( | | ) | H | J | K | L | ; | ' | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * |Shift | Z | X | C | V | B | { | | } | N | M | , | . | / |Shift | + * |Shift | Z | X | C | V | B | { | | } | N | M | , | . | / |Enter | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' @@ -27,7 +27,7 @@ * |------+------+------+------+------+------|------| |------|------+------+------+------+------+------| * |FN(CAPS)| A | R | S | T | G | ( | | ) | K | N | E | I | O | ' | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| - * |Shift | Z | X | C | D | V | { | | } | M | H | , | . | / |Shift | + * |Shift | Z | X | C | D | V | { | | } | M | H | , | . | / |Enter | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------| * | Ctrl | Win | Alt | RGB | ADJ | Space| DEL | | Enter| Space| FN | Left | Down | Up |Right | * |------+------+------+------+------+------+------| |------+------+------+------+------+------+------' diff --git a/keyboards/rgbkb/sol/keymaps/default/rules.mk b/keyboards/rgbkb/sol/keymaps/default/rules.mk index 09b0e201d..203d59c6a 100644 --- a/keyboards/rgbkb/sol/keymaps/default/rules.mk +++ b/keyboards/rgbkb/sol/keymaps/default/rules.mk @@ -1,38 +1,16 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically +# Default keymap does not have any overridden options from the rev1 / rev2 rules.mk files. +# Example: +# if you wanted to disable EXTRAKEY_ENABLE, you would copy the line from the rev1/rules.mk file +# and paste it in to this file, changing the yes to no. Like so: +# EXTRAKEY_ENABLE = no # Audio control and System control(+450) # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) +# To keep things clean and tidy, as well as make upgrades easier, only place overrides from the defaults in this file. + -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = yes # Enable global lighting effects. Do not enable with RGB Matrix -RGBLIGHT_ANIMATIONS = yes # LED animations -LED_MIRRORED = yes # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) -RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) -RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode -SWAP_HANDS_ENABLE = no # Enable one-hand typing -OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000) -IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) -# Do not edit past here -ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE -else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) - OPT_DEFS += -DRGBLIGHT_FULL_POWER -endif +# Do not edit past here -ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) - OPT_DEFS += -DRGB_MATRIX_KEYPRESSES -endif +include keyboards/$(KEYBOARD)/post_rules.mk -ifeq ($(strip $(LED_MIRRORED)), yes) - OPT_DEFS += -DLED_MIRRORED -endif diff --git a/keyboards/rgbkb/sol/keymaps/kageurufu/rules.mk b/keyboards/rgbkb/sol/keymaps/kageurufu/rules.mk index 21dca0b11..056959a55 100644 --- a/keyboards/rgbkb/sol/keymaps/kageurufu/rules.mk +++ b/keyboards/rgbkb/sol/keymaps/kageurufu/rules.mk @@ -1,38 +1,21 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) - -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix -RGBLIGHT_ANIMATIONS = no # LED animations -LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = WS2812 # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) -RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) -RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode -SWAP_HANDS_ENABLE = no # Enable one-hand typing - -OLED_DRIVER_ENABLE = no # Enable the OLED Driver (+5000) -IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) +# Overridden build options from rev1 & rev2 -# Do not edit past here +# Debug Options +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration + +# RGB Options +RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix +RGBLIGHT_ANIMATIONS = no # LED animations +LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) +RGB_MATRIX_ENABLE = WS2812 # Enable per-key coordinate based RGB effects. Do not enable with RGBlight + +# Userspace implements their own LTO +LINK_TIME_OPTIMIZATION_ENABLE = no -ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE -else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) - OPT_DEFS += -DRGBLIGHT_FULL_POWER -endif -ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) - OPT_DEFS += -DRGB_MATRIX_KEYPRESSES -endif -ifeq ($(strip $(LED_MIRRORED)), yes) - OPT_DEFS += -DLED_MIRRORED -endif +# Do not edit past here + +include keyboards/$(KEYBOARD)/post_rules.mk + diff --git a/keyboards/rgbkb/sol/keymaps/xulkal/rules.mk b/keyboards/rgbkb/sol/keymaps/xulkal/rules.mk index ad0c48034..238d1cf23 100644 --- a/keyboards/rgbkb/sol/keymaps/xulkal/rules.mk +++ b/keyboards/rgbkb/sol/keymaps/xulkal/rules.mk @@ -1,37 +1,19 @@ -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix -RGBLIGHT_ANIMATIONS = no # LED animations -LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) -RGB_MATRIX_ENABLE = WS2812 # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) -RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) -RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode -SWAP_HANDS_ENABLE = no # Enable one-hand typing -OLED_DRIVER_ENABLE = yes # Enable the OLED Driver (+5000) -ENCODER_ENABLE = no # Enable rotary encoder (+90) -IOS_DEVICE_ENABLE = no # Limit max brightness to connect to IOS device (iPad,iPhone) +# Overridden build options from rev1 & rev2 + +# RGB Options +RGBLIGHT_ENABLE = no # Enable global lighting effects. Do not enable with RGB Matrix +RGBLIGHT_ANIMATIONS = no # LED animations +LED_MIRRORED = no # Mirror LEDs across halves (enable DIP 1 on slave, and DIP 2 and 3 on master) +RGB_MATRIX_ENABLE = WS2812 # Enable per-key coordinate based RGB effects. Do not enable with RGBlight +FULLHAND_ENABLE = yes # Enables the additional 24 Full Hand LEDs + +# Misc +OLED_DRIVER_ENABLE = yes # Enable the OLED Driver -# Do not edit past here -ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes) - OPT_DEFS += -DIOS_DEVICE_ENABLE -else ifeq ($(strip $(RGBLIGHT_FULL_POWER)), yes) - OPT_DEFS += -DRGBLIGHT_FULL_POWER -endif -ifeq ($(strip $(RGB_MATRIX_KEYPRESSES)), yes) - OPT_DEFS += -DRGB_MATRIX_KEYPRESSES -endif -ifeq ($(strip $(LED_MIRRORED)), yes) - OPT_DEFS += -DLED_MIRRORED -endif +# Do not edit past here + +include keyboards/$(KEYBOARD)/post_rules.mk + |