diff options
Diffstat (limited to 'keyboards/sentraq/s60_x')
| -rw-r--r-- | keyboards/sentraq/s60_x/default/rules.mk | 58 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c | 9 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/custom/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/default/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/hasu/keymap.c | 17 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/hasu/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c | 11 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/hhkb/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/iso/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/jpec/keymap.c | 5 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/plain/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/poker/keymap.c | 15 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/poker/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/poker_bit/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/poker_set/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/keymaps/spacefn/readme.md | 2 | ||||
| -rw-r--r-- | keyboards/sentraq/s60_x/rgb/rules.mk | 58 |
17 files changed, 52 insertions, 141 deletions
diff --git a/keyboards/sentraq/s60_x/default/rules.mk b/keyboards/sentraq/s60_x/default/rules.mk index af43bf6c5..8b3674cd8 100644 --- a/keyboards/sentraq/s60_x/default/rules.mk +++ b/keyboards/sentraq/s60_x/default/rules.mk @@ -1,55 +1,16 @@ - - # MCU name -#MCU = at90usb1287 MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -64,5 +25,4 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 - -LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb
\ No newline at end of file +LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb diff --git a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c index 08780a28c..f7a66b96f 100644 --- a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/keymap.c @@ -31,14 +31,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #define KC_SPACEFN KC_FN0 #define KC_OSLS KC_FN3 #define KC_GMLK KC_FN1 -#define KC_FUNC KC_FN2 +#define KC_FUNC MO(2) #define MICMUTE RCTL(KC_LCTL) enum function_codes { F_SPACEFN = 0, F_OSLS = 3, F_GMLK = 1, - F_FUNC = 2 }; enum layer_names { @@ -154,15 +153,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { const uint16_t PROGMEM fn_actions[] = { [F_SPACEFN] = ACTION_LAYER_TAP_KEY(2, KC_SPACE), // SpaceFn layout 1 [F_GMLK] = ACTION_LAYER_TOGGLE(1), // Disable SpaceFn and Oneshot Shift - [F_FUNC] = ACTION_LAYER_MOMENTARY(2), // SpaceFn layout 1 [F_OSLS] = ACTION_MODS_ONESHOT(MOD_LSFT) // Oneshot Leftshift }; -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - return MACRO_NONE; -}; - void matrix_init_user(void) { } diff --git a/keyboards/sentraq/s60_x/keymaps/custom/readme.md b/keyboards/sentraq/s60_x/keymaps/custom/readme.md index fd79d5360..88ecdbbfc 100644 --- a/keyboards/sentraq/s60_x/keymaps/custom/readme.md +++ b/keyboards/sentraq/s60_x/keymaps/custom/readme.md @@ -1,4 +1,4 @@ -### 8 Custom +### 8 Custom The custom keymap - [keymap.c](keymap.c) - is where I tested all the switches, not being concerned with a specific layout or layers. It's a plain layout option with the extra keys used on ISO & HHKB layouts being assigned some other keys. #### 8.0 Default layer diff --git a/keyboards/sentraq/s60_x/keymaps/default/readme.md b/keyboards/sentraq/s60_x/keymaps/default/readme.md index 01cda9df9..8154d114a 100644 --- a/keyboards/sentraq/s60_x/keymaps/default/readme.md +++ b/keyboards/sentraq/s60_x/keymaps/default/readme.md @@ -1,4 +1,4 @@ -### 1 Standard - ANSI +### 1 Standard - ANSI The standard keymap is the one that is pre-flashed on the S60-X. #### 1.0 Default layer diff --git a/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c b/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c index 76398697c..077f1c627 100644 --- a/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/hasu/keymap.c @@ -1,5 +1,9 @@ #include QMK_KEYBOARD_H +#define KC_MO4 MO(4) +#define KC_MO6 MO(6) +#define KC_MO7 MO(7) + /* * Hasu */ @@ -22,7 +26,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ CAPS, A, S, D, F, G, H, J, K, L, FN2, QUOT, NO, ENT, \ LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, FN1, NO, FN9, NO, \ - LCTL, LGUI, LALT, SPC, RALT, FN3, FN3, FN0), + LCTL, LGUI, LALT, SPC, RALT, MO6, MO6, MO4), /* Keymap 1: colemak ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ @@ -41,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, F, P, G, J, L, U, Y, SCLN, LBRC, RBRC, BSLS, \ BSPC, A, R, S, T, D, H, N, E, I, O, QUOT, NO, ENT, \ LSFT, NO, Z, X, C, V, B, K, M, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, FN0), + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, MO4), /* Keymap 2: dvorak ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ [ │ ] │▒▒▒▒▒│BKSPC│ @@ -60,7 +64,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, QUOT, COMM, DOT, P, Y, F, G, C, R, L, SLSH, EQL, BSLS, \ CAPS, A, O, E, U, I, D, H, T, N, S, MINS, NO, ENT, \ LSFT, NO, SCLN, Q, J, K, X, B, M, W, V, Z, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, FN0), + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, MO4), /* Keymap 3: workman ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ @@ -79,7 +83,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, D, R, W, B, J, F, U, P, SCLN, LBRC, RBRC, BSLS, \ BSPC, A, S, H, T, G, Y, N, E, O, I, QUOT, NO, ENT, \ LSFT, NO, Z, X, M, C, V, K, L, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, FN0), + LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, MO4), /* Overlay 4: HHKB mode ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │Grave│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ Del │ @@ -98,7 +102,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { CAPS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PSCR, SLCK, PAUS, UP, TRNS, INS, \ LCTL, VOLD, VOLU, MUTE, TRNS, TRNS, PAST, PSLS, HOME, PGUP, LEFT, RGHT, TRNS, ENT, \ LSFT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS, END, PGDN, DOWN, TRNS, RSFT, TRNS, \ - LCTL, LGUI, LALT, SPC, RALT, RGUI, FN4, TRNS), + LCTL, LGUI, LALT, SPC, RALT, RGUI, MO7, TRNS), /* Overlay 5: Vi mode (Slash) ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │Grave│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│BkSpc│ @@ -169,11 +173,8 @@ Lw: set Workman layout * Fn action definition */ const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(4), [1] = ACTION_LAYER_TAP_KEY(5, KC_SLASH), [2] = ACTION_LAYER_TAP_KEY(6, KC_SCLN), - [3] = ACTION_LAYER_MOMENTARY(6), - [4] = ACTION_LAYER_MOMENTARY(7), // to Layout selector [5] = ACTION_DEFAULT_LAYER_SET(0), // set qwerty layout [6] = ACTION_DEFAULT_LAYER_SET(1), // set colemak layout [7] = ACTION_DEFAULT_LAYER_SET(2), // set dvorak layout diff --git a/keyboards/sentraq/s60_x/keymaps/hasu/readme.md b/keyboards/sentraq/s60_x/keymaps/hasu/readme.md index b79d0e97a..7a8104472 100644 --- a/keyboards/sentraq/s60_x/keymaps/hasu/readme.md +++ b/keyboards/sentraq/s60_x/keymaps/hasu/readme.md @@ -1,4 +1,4 @@ -### 5. Hasu +### 5. Hasu This is Hasu's favorite keymap with HHKB Fn, Vi cursor and Mousekey layer. See [keymap.c](keymap.c) for detail. (Hasu is the initial creator of the TMK firmware, in case you weren't aware.)
\ No newline at end of file diff --git a/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c b/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c index b572b4484..1ccefb6dd 100644 --- a/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/hhkb/keymap.c @@ -1,5 +1,7 @@ #include QMK_KEYBOARD_H +#define KC_MO1 MO(1) + /* * HHKB Layout */ @@ -21,7 +23,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSLS, GRV, \ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSPC, \ LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT, \ - LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, FN0, \ + LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, MO1, \ NO, LGUI, LALT, SPC, NO, RALT, RGUI, NO), /* 1: HHKB Fn layer ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ @@ -43,10 +45,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, PPLS, PMNS, END, PGDN, DOWN, NO, TRNS, TRNS, \ TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS), }; - -/* - * Fn action definition - */ -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_LAYER_MOMENTARY(1), -}; diff --git a/keyboards/sentraq/s60_x/keymaps/hhkb/readme.md b/keyboards/sentraq/s60_x/keymaps/hhkb/readme.md index c7dcec899..08df14e48 100644 --- a/keyboards/sentraq/s60_x/keymaps/hhkb/readme.md +++ b/keyboards/sentraq/s60_x/keymaps/hhkb/readme.md @@ -1,4 +1,4 @@ -### 7. HHKB +### 7. HHKB [keymap.c](keymap.c) emulates original HHKB layers. #### 7.0: Default layer ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ diff --git a/keyboards/sentraq/s60_x/keymaps/iso/readme.md b/keyboards/sentraq/s60_x/keymaps/iso/readme.md index 2c06bf86f..6b846617d 100644 --- a/keyboards/sentraq/s60_x/keymaps/iso/readme.md +++ b/keyboards/sentraq/s60_x/keymaps/iso/readme.md @@ -1,4 +1,4 @@ -### 2 Standard - ISO +### 2 Standard - ISO The same as the standard keymap, but with additional ISO keys. diff --git a/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c b/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c index 4d84396e3..4b7208a9e 100644 --- a/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/jpec/keymap.c @@ -16,6 +16,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include QMK_KEYBOARD_H +#define KC_MO1 MO(1) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Layout 0: Default Layer * ,-----------------------------------------------------------. @@ -35,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ LCTL, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NUHS, ENT, \ LSFT, NUBS, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ - FN1, LGUI, LALT, FN0, RALT, RGUI, APP, RCTL), + MO1, LGUI, LALT, FN0, RALT, RGUI, APP, RCTL), /* Layout 1: Function Layer * ,-----------------------------------------------------------. @@ -63,7 +65,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ const uint16_t PROGMEM fn_actions[] = { [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE), /* SpaceFn layout 1 */ - [1] = ACTION_LAYER_MOMENTARY(1), /* Momentary layout 1 */ [2] = ACTION_MODS_KEY(MOD_LSFT, KC_DEL), /* Cut */ [3] = ACTION_MODS_KEY(MOD_LCTL, KC_INS), /* Copy */ [4] = ACTION_MODS_KEY(MOD_LSFT, KC_INS), /* Paste */ diff --git a/keyboards/sentraq/s60_x/keymaps/plain/readme.md b/keyboards/sentraq/s60_x/keymaps/plain/readme.md index 02f524495..402aa1bf9 100644 --- a/keyboards/sentraq/s60_x/keymaps/plain/readme.md +++ b/keyboards/sentraq/s60_x/keymaps/plain/readme.md @@ -1,4 +1,4 @@ -### 4. Plain +### 4. Plain Without any Fn layer this will be useful if you want to use key remapping tool like AHK on host. See [keymap.c](keymap.c) for detail. diff --git a/keyboards/sentraq/s60_x/keymaps/poker/keymap.c b/keyboards/sentraq/s60_x/keymaps/poker/keymap.c index 61685b477..3b38ed501 100644 --- a/keyboards/sentraq/s60_x/keymaps/poker/keymap.c +++ b/keyboards/sentraq/s60_x/keymaps/poker/keymap.c @@ -1,5 +1,8 @@ #include QMK_KEYBOARD_H +#define KC_MO6 MO(6) +#define KC_MO7 MO(7) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* 0: qwerty ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ @@ -19,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \ CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT, \ LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + LCTL, LGUI, LALT, SPC, MO6, RGUI, APP, RCTL), /* 1: colemak ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ @@ -38,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, W, F, P, G, J, L, U, Y, SCLN, LBRC, RBRC, BSLS, \ BSPC, A, R, S, T, D, H, N, E, I, O, QUOT, NO, ENT, \ LSFT, NO, Z, X, C, V, B, K, M, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + LCTL, LGUI, LALT, SPC, MO6, RGUI, APP, RCTL), /* 2: dvorak ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ [ │ ] │▒▒▒▒▒│BKSPC│ @@ -57,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, QUOT, COMM, DOT, P, Y, F, G, C, R, L, SLSH, EQL, BSLS, \ CAPS, A, O, E, U, I, D, H, T, N, S, MINS, NO, ENT, \ LSFT, NO, SCLN, Q, J, K, X, B, M, W, V, Z, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + LCTL, LGUI, LALT, SPC, MO6, RGUI, APP, RCTL), /* 3: workman ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │GRAVE│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│ @@ -76,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TAB, Q, D, R, W, B, J, F, U, P, SCLN, LBRC, RBRC, BSLS, \ BSPC, A, S, H, T, G, Y, N, E, O, I, QUOT, NO, ENT, \ LSFT, NO, Z, X, M, C, V, K, L, COMM, DOT, SLSH, NO, RSFT, NO, \ - LCTL, LGUI, LALT, SPC, FN0, RGUI, APP, RCTL), + LCTL, LGUI, LALT, SPC, MO6, RGUI, APP, RCTL), /* 4: Poker with Arrow ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐ │ │ │ │ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │ @@ -136,7 +139,7 @@ FnS: toggle Arrow overlay */ LAYOUT_kc( ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \ - TRNS, FN2, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME, INS, FN4, \ + TRNS, FN2, UP, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, CALC, TRNS, HOME, INS, MO7, \ TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, PSCR, SLCK, PAUS, TRNS, FN3, END, TRNS, TRNS, \ TRNS, TRNS, DEL, TRNS, WHOM, MUTE, VOLU, VOLD, TRNS, PGUP, PGDN, DEL, TRNS, TRNS, TRNS, \ TRNS, TRNS, TRNS, FN1, TRNS, TRNS, TRNS, TRNS), @@ -168,11 +171,9 @@ Lw: set Workman layout }; const uint16_t PROGMEM fn_actions[] = { /* Poker Layout */ - [0] = ACTION_LAYER_MOMENTARY(6), // to Fn overlay [1] = ACTION_LAYER_TOGGLE(4), // toggle arrow overlay [2] = ACTION_LAYER_TOGGLE(5), // toggle Esc overlay [3] = ACTION_MODS_KEY(MOD_RCTL|MOD_RSFT, KC_ESC), // Task(RControl,RShift+Esc) - [4] = ACTION_LAYER_MOMENTARY(7), // to Layout selector [5] = ACTION_DEFAULT_LAYER_SET(0), // set qwerty layout [6] = ACTION_DEFAULT_LAYER_SET(1), // set colemak layout [7] = ACTION_DEFAULT_LAYER_SET(2), // set dvorak layout diff --git a/keyboards/sentraq/s60_x/keymaps/poker/readme.md b/keyboards/sentraq/s60_x/keymaps/poker/readme.md index 04d2b78be..2fdc9d702 100644 --- a/keyboards/sentraq/s60_x/keymaps/poker/readme.md +++ b/keyboards/sentraq/s60_x/keymaps/poker/readme.md @@ -1,4 +1,4 @@ -### 3 Poker +### 3 Poker [keymap_poker](../poker/readme.md) emulates original Poker layers while both [keymap_poker_bit](../poker_bit/readme.md) and [keymap_poker_set](../poker_set/readme.md) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys. diff --git a/keyboards/sentraq/s60_x/keymaps/poker_bit/readme.md b/keyboards/sentraq/s60_x/keymaps/poker_bit/readme.md index 04d2b78be..2fdc9d702 100644 --- a/keyboards/sentraq/s60_x/keymaps/poker_bit/readme.md +++ b/keyboards/sentraq/s60_x/keymaps/poker_bit/readme.md @@ -1,4 +1,4 @@ -### 3 Poker +### 3 Poker [keymap_poker](../poker/readme.md) emulates original Poker layers while both [keymap_poker_bit](../poker_bit/readme.md) and [keymap_poker_set](../poker_set/readme.md) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys. diff --git a/keyboards/sentraq/s60_x/keymaps/poker_set/readme.md b/keyboards/sentraq/s60_x/keymaps/poker_set/readme.md index 04d2b78be..2fdc9d702 100644 --- a/keyboards/sentraq/s60_x/keymaps/poker_set/readme.md +++ b/keyboards/sentraq/s60_x/keymaps/poker_set/readme.md @@ -1,4 +1,4 @@ -### 3 Poker +### 3 Poker [keymap_poker](../poker/readme.md) emulates original Poker layers while both [keymap_poker_bit](../poker_bit/readme.md) and [keymap_poker_set](../poker_set/readme.md) implements same layout in different way and they fix a minor issue of original Poker and enhance arrow keys. diff --git a/keyboards/sentraq/s60_x/keymaps/spacefn/readme.md b/keyboards/sentraq/s60_x/keymaps/spacefn/readme.md index fd657f652..3fe215afc 100644 --- a/keyboards/sentraq/s60_x/keymaps/spacefn/readme.md +++ b/keyboards/sentraq/s60_x/keymaps/spacefn/readme.md @@ -1,4 +1,4 @@ -### 6. SpaceFN +### 6. SpaceFN This layout proposed by spiceBar uses space bar to change layer with using Dual role key technique. See [keymap.c](keymap.c) and [SpaceFN discussion](http://geekhack.org/index.php?topic=51069.0). #### 6.0 Default layer diff --git a/keyboards/sentraq/s60_x/rgb/rules.mk b/keyboards/sentraq/s60_x/rgb/rules.mk index 409d60abf..efd66a1ba 100644 --- a/keyboards/sentraq/s60_x/rgb/rules.mk +++ b/keyboards/sentraq/s60_x/rgb/rules.mk @@ -1,55 +1,16 @@ - - # MCU name -#MCU = at90usb1287 MCU = atmega32u4 -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# ATmega32A bootloadHID +# ATmega328P USBasp BOOTLOADER = atmel-dfu - # Build Options # change yes to no to disable # @@ -69,5 +30,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB light - -LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb
\ No newline at end of file +LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb |