aboutsummaryrefslogtreecommitdiffstats
path: root/keyboards/wilba_tech/wt75_a
diff options
context:
space:
mode:
Diffstat (limited to 'keyboards/wilba_tech/wt75_a')
-rw-r--r--keyboards/wilba_tech/wt75_a/config.h41
-rw-r--r--keyboards/wilba_tech/wt75_a/info.json2
-rw-r--r--keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk71
-rw-r--r--keyboards/wilba_tech/wt75_a/rules.mk60
4 files changed, 48 insertions, 126 deletions
diff --git a/keyboards/wilba_tech/wt75_a/config.h b/keyboards/wilba_tech/wt75_a/config.h
index d1ae33156..f63bbf69c 100644
--- a/keyboards/wilba_tech/wt75_a/config.h
+++ b/keyboards/wilba_tech/wt75_a/config.h
@@ -179,24 +179,45 @@
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
-#define WT_MONO_BACKLIGHT
+// enable the mono backlight
+#define MONO_BACKLIGHT_ENABLED 1
+
+// enable the RGB indicator for WT75-A
+#define MONO_BACKLIGHT_WT75_A
+
+// disable backlight when USB suspended (PC sleep/hibernate/shutdown)
+#define MONO_BACKLIGHT_DISABLE_WHEN_USB_SUSPENDED 0
+
+// disable backlight after timeout in minutes, 0 = no timeout
+#define MONO_BACKLIGHT_DISABLE_AFTER_TIMEOUT 0
+
+// the default brightness
+#define MONO_BACKLIGHT_BRIGHTNESS 255
+
+// the default effect
+#define MONO_BACKLIGHT_EFFECT 1
+
+// the default effect speed (0-3)
+#define MONO_BACKLIGHT_EFFECT_SPEED 0
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage
// TODO: refactor with new user EEPROM code (coming soon)
-#define EEPROM_MAGIC 0x451F
-#define EEPROM_MAGIC_ADDR 32
+#define EEPROM_MAGIC 0x4520
+#define EEPROM_MAGIC_ADDR 34
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
// and avoid loading invalid data from the EEPROM
#define EEPROM_VERSION 0x08
-#define EEPROM_VERSION_ADDR 34
-
-// Dynamic keymap starts after EEPROM version
-#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
-// Dynamic macro starts after dynamic keymaps (35+(4*6*15*2)) = (35+720)
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 755
-#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 269
+#define EEPROM_VERSION_ADDR 36
+
+// Backlight config starts after EEPROM version
+#define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR 37
+// Dynamic keymap starts after backlight config (37+7)
+#define DYNAMIC_KEYMAP_EEPROM_ADDR 44
+// Dynamic macro starts after dynamic keymaps (44+(4*6*15*2)) = (44+720)
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 764
+#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 260
#define DYNAMIC_KEYMAP_MACRO_COUNT 16
diff --git a/keyboards/wilba_tech/wt75_a/info.json b/keyboards/wilba_tech/wt75_a/info.json
index d9c54a63a..b52d96852 100644
--- a/keyboards/wilba_tech/wt75_a/info.json
+++ b/keyboards/wilba_tech/wt75_a/info.json
@@ -6,7 +6,7 @@
"width": 16,
"height": 6,
"layouts": {
- "LAYOUT": {
+ "LAYOUT_all": {
"layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1.5, "y":0}, {"label":"F2", "x":2.5, "y":0}, {"label":"F3", "x":3.5, "y":0}, {"label":"F4", "x":4.5, "y":0}, {"label":"F5", "x":5.75, "y":0}, {"label":"F6", "x":6.75, "y":0}, {"label":"F7", "x":7.75, "y":0}, {"label":"F8", "x":8.75, "y":0}, {"label":"F9", "x":10, "y":0}, {"label":"F10", "x":11, "y":0}, {"label":"F11", "x":12, "y":0}, {"label":"F12", "x":13, "y":0}, {"label":"Del", "x":15, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Bksp", "x":13, "y":1.25}, {"label":"Bksp", "x":14, "y":1.25}, {"label":"Home", "x":15, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"PgUp", "x":15, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"PgDn", "x":15, "y":3.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"label":"\u2191", "x":14, "y":4.25}, {"label":"End", "x":15, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"label":"6.25U", "x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"\u2190", "x":13, "y":5.25}, {"label":"\u2193", "x":14, "y":5.25}, {"label":"\u2192", "x":15, "y":5.25}]
}
}
diff --git a/keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk b/keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk
index 76a07d7a4..4880a57be 100644
--- a/keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk
+++ b/keyboards/wilba_tech/wt75_a/keymaps/via/rules.mk
@@ -1,71 +1,2 @@
-# project specific files
-SRC = drivers/issi/is31fl3736.c \
- drivers/avr/i2c_master.c \
- keyboards/wilba_tech/wt_mono_backlight.c \
- keyboards/wilba_tech/wt_main.c
-
-# MCU name
-MCU = atmega32u4
-
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
-BOOTLOADER = atmel-dfu
-
-
-# Build Options
-# change yes to no to disable
-#
-BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
-CONSOLE_ENABLE = no # Console for debug(+400)
-COMMAND_ENABLE = no # Commands for debug and configuration
-# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
-SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
-# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-NKRO_ENABLE = yes # USB Nkey Rollover
-BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
-MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
-UNICODE_ENABLE = no # Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
-AUDIO_ENABLE = no # Audio output on port C6
-FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
-
RAW_ENABLE = yes
-DYNAMIC_KEYMAP_ENABLE = yes \ No newline at end of file
+DYNAMIC_KEYMAP_ENABLE = yes
diff --git a/keyboards/wilba_tech/wt75_a/rules.mk b/keyboards/wilba_tech/wt75_a/rules.mk
index e41f2186b..111c94ee8 100644
--- a/keyboards/wilba_tech/wt75_a/rules.mk
+++ b/keyboards/wilba_tech/wt75_a/rules.mk
@@ -1,53 +1,16 @@
-# project specific files
-SRC = drivers/issi/is31fl3736.c \
- drivers/avr/i2c_master.c \
- keyboards/wilba_tech/wt_mono_backlight.c \
- keyboards/wilba_tech/wt_main.c
-
# MCU name
MCU = atmega32u4
-# Processor frequency.
-# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency in Hz. You can then use this symbol in your source code to
-# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-# automatically to create a 32-bit value in your source code.
-#
-# This will be an integer division of F_USB below, as it is sourced by
-# F_USB after it has run through any CPU prescalers. Note that this value
-# does not *change* the processor frequency - it should merely be updated to
-# reflect the processor speed set externally so that the code can use accurate
-# software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU if prescaling is used on the latter, and is required as the
-# raw input clock is fed directly to the PLL sections of the AVR for high speed
-# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-# at the end, this will be done automatically to create a 32-bit value in your
-# source code.
-#
-# If no clock division is performed on the input clock inside the AVR (via the
-# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# ATmega32A bootloadHID
+# ATmega328P USBasp
BOOTLOADER = atmel-dfu
-
# Build Options
# change yes to no to disable
#
@@ -66,3 +29,10 @@ UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+
+# project specific files
+SRC = drivers/issi/is31fl3736.c \
+ drivers/avr/i2c_master.c \
+ quantum/color.c \
+ keyboards/wilba_tech/wt_mono_backlight.c \
+ keyboards/wilba_tech/wt_main.c
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2025-01-15 07:43:43 +0000