diff options
Diffstat (limited to 'keyboards')
24 files changed, 453 insertions, 197 deletions
diff --git a/keyboards/e6v2/e6v2.c b/keyboards/e6v2/e6v2.c index 917f3e07b..e7d5fe9e3 100644 --- a/keyboards/e6v2/e6v2.c +++ b/keyboards/e6v2/e6v2.c @@ -1,53 +1 @@ -#include "e6v2.h" - -void matrix_init_kb(void) { - // put your keyboard start-up code here - // runs once when the firmware starts up - - matrix_init_user(); -} - -void matrix_scan_kb(void) { - // put your looping keyboard code here - // runs every cycle (a lot) - - matrix_scan_user(); -} - -bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - // put your per-action keyboard code here - // runs for every action, just before processing by the firmware - - return process_record_user(keycode, record); -} - -void led_set_kb(uint8_t usb_led) { - // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here - DDRB |= (1<<6); - if (usb_led & (1<<USB_LED_CAPS_LOCK)) { - // output low - DDRB |= (1<<2); - PORTB &= ~(1<<2); - } else { - // Hi-Z - DDRB &= ~(1<<2); - PORTB &= ~(1<<2); - } - // DDRB |= (1<<7); - // DDRB |= (1<<1); - // DDRB |= (1<<3); - // DDRE |= (1<<6); - if (usb_led == 0){ - PORTB |= (1<<6); - // PORTB |= (1<<7); - // PORTB |= (1<<1); - // PORTB |= (1<<3); - // PORTE |= (1<<6); - } - else{ - PORTB &= ~(1<<6); - // PORTB &= ~(1<<7); - } - - led_set_user(usb_led); -} +#include "e6v2.h"
\ No newline at end of file diff --git a/keyboards/e6v2/e6v2.h b/keyboards/e6v2/e6v2.h index 6416b4bd5..5190a3e82 100644 --- a/keyboards/e6v2/e6v2.h +++ b/keyboards/e6v2/e6v2.h @@ -3,64 +3,12 @@ #include "quantum.h" -#define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \ -} - -#define LAYOUT_60_ansi( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, KC_NO }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \ -} - -#define LAYOUT_hhkb( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K41, K42, K46, K4B, K4C \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ - { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \ -} - -#define LAYOUT_hhkb_splits( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ - K41, K42, K46, K4B, K4C \ -)\ -{\ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ - { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \ -} +#ifdef KEYBOARD_e6v2_oe + #include "oe.h" +#endif +#ifdef KEYBOARD_e6v2_le + #include "le.h" #endif + +#endif
\ No newline at end of file diff --git a/keyboards/e6v2/keymaps/amnesia0287/config.h b/keyboards/e6v2/keymaps/amnesia0287/config.h deleted file mode 100644 index a5568e400..000000000 --- a/keyboards/e6v2/keymaps/amnesia0287/config.h +++ /dev/null @@ -1 +0,0 @@ -#include "../../config.h" diff --git a/keyboards/e6v2/keymaps/amnesia0287/rules.mk b/keyboards/e6v2/keymaps/amnesia0287/rules.mk deleted file mode 100644 index e69de29bb..000000000 --- a/keyboards/e6v2/keymaps/amnesia0287/rules.mk +++ /dev/null diff --git a/keyboards/e6v2/keymaps/default/config.h b/keyboards/e6v2/keymaps/default/config.h deleted file mode 100644 index a5568e400..000000000 --- a/keyboards/e6v2/keymaps/default/config.h +++ /dev/null @@ -1 +0,0 @@ -#include "../../config.h" diff --git a/keyboards/e6v2/keymaps/default/rules.mk b/keyboards/e6v2/keymaps/default/rules.mk deleted file mode 100644 index e69de29bb..000000000 --- a/keyboards/e6v2/keymaps/default/rules.mk +++ /dev/null diff --git a/keyboards/e6v2/le/config.h b/keyboards/e6v2/le/config.h new file mode 100644 index 000000000..e15545150 --- /dev/null +++ b/keyboards/e6v2/le/config.h @@ -0,0 +1,65 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Exclusive / E-Team +#define PRODUCT E6-V2 LE +#define DESCRIPTION E6-V2 LE QMK PCB (Mid-Port) + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* QMK E6-V2 PCB default pin-out */ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 } +#define MATRIX_COL_PINS { B5, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7 } +#define UNUSED_PINS + +#define RGB_DI_PIN E6 +#ifdef RGB_DI_PIN +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 12 +#define RGBLIGHT_VAL_STEP 12 +#endif + +#define BACKLIGHT_PIN B6 +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 2 +#define BACKLIGHT_BREAHTING +#define BREATHING_PERIOD 3 +#endif + +#define DIODE_DIRECTION COL2ROW +#define DEBOUNCING_DELAY 5 + +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ + ) + + + +#endif diff --git a/keyboards/e6v2/le/info.json b/keyboards/e6v2/le/info.json new file mode 100644 index 000000000..9f9251282 --- /dev/null +++ b/keyboards/e6v2/le/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "E6-V2 LE", + "url": "", + "maintainer": "qmk", + "width": 15, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"x":0, "y":3}, {"x":1, "y":3}, {"label":"Z", "x":2, "y":3}, {"label":"X", "x":3, "y":3}, {"label":"C", "x":4, "y":3}, {"label":"V", "x":5, "y":3}, {"label":"B", "x":6, "y":3}, {"label":"N", "x":7, "y":3}, {"label":"M", "x":8, "y":3}, {"label":"<", "x":9, "y":3}, {"label":">", "x":10, "y":3}, {"label":"?", "x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4, "w":1.75}, {"label":"Ctrl", "x":1.75, "y":4, "w":1.25}, {"label":"Win", "x":3, "y":4, "w":1.25}, {"label":"Alt", "x":4.25, "y":4, "w":1.25}, {"x":5.5, "y":4, "w":2.75}, {"x":8.25, "y":4, "w":1.75}, {"x":10, "y":4}, {"label":"Alt", "x":11, "y":4}, {"label":"Win", "x":12, "y":4}, {"label":"Menu", "x":13, "y":4}, {"label":"Ctrl", "x":14, "y":4}] + } + } +}
\ No newline at end of file diff --git a/keyboards/e6v2/le/le.c b/keyboards/e6v2/le/le.c new file mode 100644 index 000000000..9083352d4 --- /dev/null +++ b/keyboards/e6v2/le/le.c @@ -0,0 +1,53 @@ +#include "le.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + DDRB |= (1<<6); + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output low + DDRB |= (1<<2); + PORTB &= ~(1<<2); + } else { + // Hi-Z + DDRB &= ~(1<<2); + PORTB &= ~(1<<2); + } + // DDRB |= (1<<7); + // DDRB |= (1<<1); + // DDRB |= (1<<3); + // DDRE |= (1<<6); + if (usb_led == 0){ + PORTB |= (1<<6); + // PORTB |= (1<<7); + // PORTB |= (1<<1); + // PORTB |= (1<<3); + // PORTE |= (1<<6); + } + else{ + PORTB &= ~(1<<6); + // PORTB &= ~(1<<7); + } + + led_set_user(usb_led); +} diff --git a/keyboards/e6v2/le/le.h b/keyboards/e6v2/le/le.h new file mode 100644 index 000000000..197b9335c --- /dev/null +++ b/keyboards/e6v2/le/le.h @@ -0,0 +1,19 @@ +#ifndef LE_H +#define LE_H + +#include "../e6v2.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K42, K43, K44, K47, K49, K4A, K4B, K4C, K4D, K4E \ +)\ +{\ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, KC_NO, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, KC_NO, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, K43, K44, KC_NO, KC_NO, K47, KC_NO, K49, K4A, K4B, K4C, K4D, K4E }, \ +}
\ No newline at end of file diff --git a/keyboards/e6v2/le/readme.md b/keyboards/e6v2/le/readme.md new file mode 100644 index 000000000..33a864771 --- /dev/null +++ b/keyboards/e6v2/le/readme.md @@ -0,0 +1,17 @@ +# E6-V2 Last Edition (LE) + +These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/) + +Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +Hardware Supported: E6-V2 LE Mid Port rev.qmk +Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0) + +Make example for this keyboard (after setting up your build environment): + + make e6v2/le:default + +Or to make and flash: + + make e6v2/le:default:dfu + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file diff --git a/keyboards/e6v2/le/rules.mk b/keyboards/e6v2/le/rules.mk new file mode 100644 index 000000000..c2c02b614 --- /dev/null +++ b/keyboards/e6v2/le/rules.mk @@ -0,0 +1,68 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/e6v2/config.h b/keyboards/e6v2/oe/config.h index b80afcb51..b80afcb51 100644 --- a/keyboards/e6v2/config.h +++ b/keyboards/e6v2/oe/config.h diff --git a/keyboards/e6v2/info.json b/keyboards/e6v2/oe/info.json index 1cac56f7e..7c1401727 100644 --- a/keyboards/e6v2/info.json +++ b/keyboards/e6v2/oe/info.json @@ -1,5 +1,5 @@ { - "keyboard_name": "E6-V2", + "keyboard_name": "E6-V2 OE", "url": "", "maintainer": "qmk", "width": 15, diff --git a/keyboards/e6v2/keymaps/amnesia0287/keymap.c b/keyboards/e6v2/oe/keymaps/amnesia0287/keymap.c index 7e64b1212..7e64b1212 100644 --- a/keyboards/e6v2/keymaps/amnesia0287/keymap.c +++ b/keyboards/e6v2/oe/keymaps/amnesia0287/keymap.c diff --git a/keyboards/e6v2/keymaps/amnesia0287/readme.md b/keyboards/e6v2/oe/keymaps/amnesia0287/readme.md index 4cc97aef0..4cc97aef0 100644 --- a/keyboards/e6v2/keymaps/amnesia0287/readme.md +++ b/keyboards/e6v2/oe/keymaps/amnesia0287/readme.md diff --git a/keyboards/e6v2/keymaps/default/keymap.c b/keyboards/e6v2/oe/keymaps/default/keymap.c index 945787f0d..945787f0d 100644 --- a/keyboards/e6v2/keymaps/default/keymap.c +++ b/keyboards/e6v2/oe/keymaps/default/keymap.c diff --git a/keyboards/e6v2/keymaps/default/readme.md b/keyboards/e6v2/oe/keymaps/default/readme.md index e72647364..e72647364 100644 --- a/keyboards/e6v2/keymaps/default/readme.md +++ b/keyboards/e6v2/oe/keymaps/default/readme.md diff --git a/keyboards/e6v2/oe/oe.c b/keyboards/e6v2/oe/oe.c new file mode 100644 index 000000000..10cd59f0c --- /dev/null +++ b/keyboards/e6v2/oe/oe.c @@ -0,0 +1,53 @@ +#include "oe.h" + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + DDRB |= (1<<6); + if (usb_led & (1<<USB_LED_CAPS_LOCK)) { + // output low + DDRB |= (1<<2); + PORTB &= ~(1<<2); + } else { + // Hi-Z + DDRB &= ~(1<<2); + PORTB &= ~(1<<2); + } + // DDRB |= (1<<7); + // DDRB |= (1<<1); + // DDRB |= (1<<3); + // DDRE |= (1<<6); + if (usb_led == 0){ + PORTB |= (1<<6); + // PORTB |= (1<<7); + // PORTB |= (1<<1); + // PORTB |= (1<<3); + // PORTE |= (1<<6); + } + else{ + PORTB &= ~(1<<6); + // PORTB &= ~(1<<7); + } + + led_set_user(usb_led); +} diff --git a/keyboards/e6v2/oe/oe.h b/keyboards/e6v2/oe/oe.h new file mode 100644 index 000000000..2cfecb0be --- /dev/null +++ b/keyboards/e6v2/oe/oe.h @@ -0,0 +1,66 @@ +#ifndef OE_H +#define OE_H + +#include "../e6v2.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +)\ +{\ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \ +} + +#define LAYOUT_60_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +)\ +{\ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO }, \ +} + +#define LAYOUT_hhkb( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K41, K42, K46, K4B, K4C \ +)\ +{\ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ + { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \ +} + +#define LAYOUT_hhkb_splits( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K41, K42, K46, K4B, K4C \ +)\ +{\ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO }, \ + { KC_NO, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, KC_NO, K4B, K4C, KC_NO, KC_NO }, \ +} + +#endif diff --git a/keyboards/e6v2/oe/readme.md b/keyboards/e6v2/oe/readme.md new file mode 100644 index 000000000..b9b42bd5f --- /dev/null +++ b/keyboards/e6v2/oe/readme.md @@ -0,0 +1,17 @@ +# E6-V2 Original Edition (OE) + +These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/) + +Keyboard Maintainer: [amnesia0287](https://github.com/amnesia0287) +Hardware Supported: E6-V2 OE Mid Port rev.qmk +Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0) + +Make example for this keyboard (after setting up your build environment): + + make e6v2/oe:default + +Or to make and flash: + + make e6v2/oe:default:dfu + +See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
\ No newline at end of file diff --git a/keyboards/e6v2/oe/rules.mk b/keyboards/e6v2/oe/rules.mk new file mode 100644 index 000000000..7d28042d8 --- /dev/null +++ b/keyboards/e6v2/oe/rules.mk @@ -0,0 +1,70 @@ +# MCU name +#MCU = at90usb1287 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in *bytes* +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = yes +MIDI_ENABLE = no # MIDI controls +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 + +LAYOUTS = 60_ansi
\ No newline at end of file diff --git a/keyboards/e6v2/readme.md b/keyboards/e6v2/readme.md index 5fd9668f5..4ac498fc4 100644 --- a/keyboards/e6v2/readme.md +++ b/keyboards/e6v2/readme.md @@ -1,18 +1,9 @@ -E6-V2 -=== +# E6-V2 These docs are for the QMK version of the PCB. [More info on qmk.fm](http://qmk.fm/) -Keyboard Maintainer: [amnesia0287](https://github.com/amnesia0287) -Hardware Supported: E6-V2 Mid Port rev.qmk -Hardware Availability: [geekhack.org/index.php?topic=90787.0](https://geekhack.org/index.php?topic=90787.0) +The E6V2 has been available with either a bootmapper client or QMK powered PCB. During the second round, the QMK powered PCB was redesigned and used different ports and a different switch matrix. -Make example for this keyboard (after setting up your build environment): - - make e6v2:default - -Or to make and flash: - - make e6v2:default:dfu +Please use the appropriate version when making your firmware. See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information. diff --git a/keyboards/e6v2/rules.mk b/keyboards/e6v2/rules.mk index 7d28042d8..0909ba2ce 100644 --- a/keyboards/e6v2/rules.mk +++ b/keyboards/e6v2/rules.mk @@ -1,70 +1 @@ -# MCU name -#MCU = at90usb1287 -MCU = atmega32u4 - -# Processor frequency. -# This will define a symbol, F_CPU, in all source code files equal to the -# processor frequency in Hz. You can then use this symbol in your source code to -# calculate timings. Do NOT tack on a 'UL' at the end, this will be done -# automatically to create a 32-bit value in your source code. -# -# This will be an integer division of F_USB below, as it is sourced by -# F_USB after it has run through any CPU prescalers. Note that this value -# does not *change* the processor frequency - it should merely be updated to -# reflect the processor speed set externally so that the code can use accurate -# software delays. -F_CPU = 16000000 - - -# -# LUFA specific -# -# Target architecture (see library "Board Types" documentation). -ARCH = AVR8 - -# Input clock frequency. -# This will define a symbol, F_USB, in all source code files equal to the -# input clock frequency (before any prescaling is performed) in Hz. This value may -# differ from F_CPU if prescaling is used on the latter, and is required as the -# raw input clock is fed directly to the PLL sections of the AVR for high speed -# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' -# at the end, this will be done automatically to create a 32-bit value in your -# source code. -# -# If no clock division is performed on the input clock inside the AVR (via the -# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. -F_USB = $(F_CPU) - -# Interrupt driven control endpoint task(+60) -OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT - - -# Boot Section Size in *bytes* -# Teensy halfKay 512 -# Teensy++ halfKay 1024 -# Atmel DFU loader 4096 -# LUFA bootloader 4096 -# USBaspLoader 2048 -OPT_DEFS += -DBOOTLOADER_SIZE=4096 - - -# Build Options -# change yes to no to disable -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default -RGBLIGHT_ENABLE = yes -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 - -LAYOUTS = 60_ansi
\ No newline at end of file +DEFAULT_FOLDER = e6v2/oe
\ No newline at end of file |