diff options
Diffstat (limited to 'keyboards')
20 files changed, 3597 insertions, 0 deletions
diff --git a/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.c b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.c new file mode 100644 index 000000000..9d10fbd75 --- /dev/null +++ b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.c @@ -0,0 +1,109 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#include "hal.h" + +#if HAL_USE_PAL || defined(__DOXYGEN__) +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = { +#if STM32_HAS_GPIOA + {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, + VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, +#endif +#if STM32_HAS_GPIOB + {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, + VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, +#endif +#if STM32_HAS_GPIOC + {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, + VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, +#endif +#if STM32_HAS_GPIOD + {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, + VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, +#endif +#if STM32_HAS_GPIOE + {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, + VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, +#endif +#if STM32_HAS_GPIOF + {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, + VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, +#endif +#if STM32_HAS_GPIOG + {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, + VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, +#endif +#if STM32_HAS_GPIOH + {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, + VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, +#endif +#if STM32_HAS_GPIOI + {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, + VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH} +#endif +}; +#endif + +void enter_bootloader_mode_if_requested(void); + +/** + * @brief Early initialization code. + * @details This initialization must be performed just after stack setup + * and before any other initialization. + */ +void __early_init(void) { + enter_bootloader_mode_if_requested(); + stm32_clock_init(); +} + +#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) +/** + * @brief MMC_SPI card detection. + */ +bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief MMC_SPI card write protection detection. + */ +bool mmc_lld_is_write_protected(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { +} diff --git a/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.h b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.h new file mode 100644 index 000000000..de3a93d1c --- /dev/null +++ b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.h @@ -0,0 +1,922 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#ifndef BOARD_H +#define BOARD_H + +/* + * Setup for ST STM32F072B-Discovery board. + */ + +/* + * Board identifier. + */ +#define BOARD_ST_STM32F072B_DISCOVERY +#define BOARD_NAME "ST STM32F072B-Discovery" + +/* + * Board oscillators-related settings. + * NOTE: HSE not fitted. + */ +#if !defined(STM32_LSECLK) +#define STM32_LSECLK 32768 +#endif + +#define STM32_LSEDRV (3U << 3U) + +#if !defined(STM32_HSECLK) +#define STM32_HSECLK 0U +#endif + +#define STM32_HSE_BYPASS + +/* + * MCU type as defined in the ST header. + */ +#define STM32F072xB + +/* + * IO pins assignments. + */ +#define GPIOA_BUTTON 0U +#define GPIOA_PIN1 1U +#define GPIOA_PIN2 2U +#define GPIOA_PIN3 3U +#define GPIOA_PIN4 4U +#define GPIOA_PIN5 5U +#define GPIOA_PIN6 6U +#define GPIOA_PIN7 7U +#define GPIOA_PIN8 8U +#define GPIOA_PIN9 9U +#define GPIOA_PIN10 10U +#define GPIOA_USB_DM 11U +#define GPIOA_USB_DP 12U +#define GPIOA_SWDIO 13U +#define GPIOA_SWCLK 14U +#define GPIOA_PIN15 15U + +#define GPIOB_PIN0 0U +#define GPIOB_PIN1 1U +#define GPIOB_PIN2 2U +#define GPIOB_PIN3 3U +#define GPIOB_PIN4 4U +#define GPIOB_PIN5 5U +#define GPIOB_PIN6 6U +#define GPIOB_PIN7 7U +#define GPIOB_PIN8 8U +#define GPIOB_PIN9 9U +#define GPIOB_PIN10 10U +#define GPIOB_PIN11 11U +#define GPIOB_PIN12 12U +#define GPIOB_SPI2_SCK 13U +#define GPIOB_SPI2_MISO 14U +#define GPIOB_SPI2_MOSI 15U + +#define GPIOC_MEMS_CS 0U +#define GPIOC_PIN1 1U +#define GPIOC_PIN2 2U +#define GPIOC_PIN3 3U +#define GPIOC_PIN4 4U +#define GPIOC_PIN5 5U +#define GPIOC_LED_RED 6U +#define GPIOC_LED_BLUE 7U +#define GPIOC_LED_ORANGE 8U +#define GPIOC_LED_GREEN 9U +#define GPIOC_PIN10 10U +#define GPIOC_PIN11 11U +#define GPIOC_PIN12 12U +#define GPIOC_PIN13 13U +#define GPIOC_OSC32_IN 14U +#define GPIOC_OSC32_OUT 15U + +#define GPIOD_PIN0 0U +#define GPIOD_PIN1 1U +#define GPIOD_PIN2 2U +#define GPIOD_PIN3 3U +#define GPIOD_PIN4 4U +#define GPIOD_PIN5 5U +#define GPIOD_PIN6 6U +#define GPIOD_PIN7 7U +#define GPIOD_PIN8 8U +#define GPIOD_PIN9 9U +#define GPIOD_PIN10 10U +#define GPIOD_PIN11 11U +#define GPIOD_PIN12 12U +#define GPIOD_PIN13 13U +#define GPIOD_PIN14 14U +#define GPIOD_PIN15 15U + +#define GPIOE_PIN0 0U +#define GPIOE_PIN1 1U +#define GPIOE_PIN2 2U +#define GPIOE_PIN3 3U +#define GPIOE_PIN4 4U +#define GPIOE_PIN5 5U +#define GPIOE_PIN6 6U +#define GPIOE_PIN7 7U +#define GPIOE_PIN8 8U +#define GPIOE_PIN9 9U +#define GPIOE_PIN10 10U +#define GPIOE_PIN11 11U +#define GPIOE_PIN12 12U +#define GPIOE_PIN13 13U +#define GPIOE_PIN14 14U +#define GPIOE_PIN15 15U + +#define GPIOF_OSC_IN 0U +#define GPIOF_OSC_OUT 1U +#define GPIOF_PIN2 2U +#define GPIOF_PIN3 3U +#define GPIOF_PIN4 4U +#define GPIOF_PIN5 5U +#define GPIOF_PIN6 6U +#define GPIOF_PIN7 7U +#define GPIOF_PIN8 8U +#define GPIOF_PIN9 9U +#define GPIOF_PIN10 10U +#define GPIOF_PIN11 11U +#define GPIOF_PIN12 12U +#define GPIOF_PIN13 13U +#define GPIOF_PIN14 14U +#define GPIOF_PIN15 15U + +/* + * IO lines assignments. + */ +#define LINE_BUTTON PAL_LINE(GPIOA, 0U) +#define LINE_USB_DM PAL_LINE(GPIOA, 11U) +#define LINE_USB_DP PAL_LINE(GPIOA, 12U) +#define LINE_SWDIO PAL_LINE(GPIOA, 13U) +#define LINE_SWCLK PAL_LINE(GPIOA, 14U) + +#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U) +#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U) +#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U) + +#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U) +#define LINE_LED_RED PAL_LINE(GPIOC, 6U) +#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U) +#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U) +#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U) +#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U) +#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U) + + + +#define LINE_OSC_IN PAL_LINE(GPIOF, 0U) +#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U) + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * Please refer to the STM32 Reference Manual for details. + */ +#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) +#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) +#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) +#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) +#define PIN_ODR_LOW(n) (0U << (n)) +#define PIN_ODR_HIGH(n) (1U << (n)) +#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) +#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) +#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) +#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) +#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) +#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) +#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) +#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) +#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) +#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) + +/* + * GPIOA setup: + * + * PA0 - BUTTON (input floating). + * PA1 - PIN1 (input pullup). + * PA2 - PIN2 (input pullup). + * PA3 - PIN3 (input pullup). + * PA4 - PIN4 (input pullup). + * PA5 - PIN5 (input pullup). + * PA6 - PIN6 (input pullup). + * PA7 - PIN7 (input pullup). + * PA8 - PIN8 (input pullup). + * PA9 - PIN9 (input pullup). + * PA10 - PIN10 (input pullup). + * PA11 - USB_DM (input floating). + * PA12 - USB_DP (input floating). + * PA13 - SWDIO (alternate 0). + * PA14 - SWCLK (alternate 0). + * PA15 - PIN15 (input pullup). + */ +#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \ + PIN_MODE_INPUT(GPIOA_PIN1) | \ + PIN_MODE_INPUT(GPIOA_PIN2) | \ + PIN_MODE_INPUT(GPIOA_PIN3) | \ + PIN_MODE_INPUT(GPIOA_PIN4) | \ + PIN_MODE_INPUT(GPIOA_PIN5) | \ + PIN_MODE_INPUT(GPIOA_PIN6) | \ + PIN_MODE_INPUT(GPIOA_PIN7) | \ + PIN_MODE_INPUT(GPIOA_PIN8) | \ + PIN_MODE_INPUT(GPIOA_PIN9) | \ + PIN_MODE_INPUT(GPIOA_PIN10) | \ + PIN_MODE_INPUT(GPIOA_USB_DM) | \ + PIN_MODE_INPUT(GPIOA_USB_DP) | \ + PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ + PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ + PIN_MODE_INPUT(GPIOA_PIN15)) +#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \ + PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) +#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \ + PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \ + PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ + PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ + PIN_OSPEED_HIGH(GPIOA_PIN15)) +#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ + PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \ + PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \ + PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ + PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN15)) +#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \ + PIN_ODR_HIGH(GPIOA_PIN1) | \ + PIN_ODR_HIGH(GPIOA_PIN2) | \ + PIN_ODR_HIGH(GPIOA_PIN3) | \ + PIN_ODR_HIGH(GPIOA_PIN4) | \ + PIN_ODR_HIGH(GPIOA_PIN5) | \ + PIN_ODR_HIGH(GPIOA_PIN6) | \ + PIN_ODR_HIGH(GPIOA_PIN7) | \ + PIN_ODR_HIGH(GPIOA_PIN8) | \ + PIN_ODR_HIGH(GPIOA_PIN9) | \ + PIN_ODR_HIGH(GPIOA_PIN10) | \ + PIN_ODR_HIGH(GPIOA_USB_DM) | \ + PIN_ODR_HIGH(GPIOA_USB_DP) | \ + PIN_ODR_HIGH(GPIOA_SWDIO) | \ + PIN_ODR_HIGH(GPIOA_SWCLK) | \ + PIN_ODR_HIGH(GPIOA_PIN15)) +#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN7, 0U)) +#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \ + PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \ + PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ + PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN15, 0U)) + +/* + * GPIOB setup: + * + * PB0 - PIN0 (input pullup). + * PB1 - PIN1 (input pullup). + * PB2 - PIN2 (input pullup). + * PB3 - PIN3 (input pullup). + * PB4 - PIN4 (input pullup). + * PB5 - PIN5 (input pullup). + * PB6 - PIN6 (input pullup). + * PB7 - PIN7 (input pullup). + * PB8 - PIN8 (input pullup). + * PB9 - PIN9 (input pullup). + * PB10 - PIN10 (input pullup). + * PB11 - PIN11 (input pullup). + * PB12 - PIN12 (input pullup). + * PB13 - SPI2_SCK (alternate 0). + * PB14 - SPI2_MISO (alternate 0). + * PB15 - SPI2_MOSI (alternate 0). + */ +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ + PIN_MODE_INPUT(GPIOB_PIN1) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_INPUT(GPIOB_PIN3) | \ + PIN_MODE_INPUT(GPIOB_PIN4) | \ + PIN_MODE_INPUT(GPIOB_PIN5) | \ + PIN_MODE_INPUT(GPIOB_PIN6) | \ + PIN_MODE_INPUT(GPIOB_PIN7) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_INPUT(GPIOB_PIN9) | \ + PIN_MODE_INPUT(GPIOB_PIN10) | \ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \ + PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \ + PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI)) +#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \ + PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \ + PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI)) +#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ + PIN_OSPEED_HIGH(GPIOB_PIN2) | \ + PIN_OSPEED_HIGH(GPIOB_PIN3) | \ + PIN_OSPEED_HIGH(GPIOB_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \ + PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \ + PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI)) +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \ + PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \ + PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI)) +#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ + PIN_ODR_HIGH(GPIOB_PIN1) | \ + PIN_ODR_HIGH(GPIOB_PIN2) | \ + PIN_ODR_HIGH(GPIOB_PIN3) | \ + PIN_ODR_HIGH(GPIOB_PIN4) | \ + PIN_ODR_HIGH(GPIOB_PIN5) | \ + PIN_ODR_HIGH(GPIOB_PIN6) | \ + PIN_ODR_HIGH(GPIOB_PIN7) | \ + PIN_ODR_HIGH(GPIOB_PIN8) | \ + PIN_ODR_HIGH(GPIOB_PIN9) | \ + PIN_ODR_HIGH(GPIOB_PIN10) | \ + PIN_ODR_HIGH(GPIOB_PIN11) | \ + PIN_ODR_HIGH(GPIOB_PIN12) | \ + PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \ + PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \ + PIN_ODR_HIGH(GPIOB_SPI2_MOSI)) +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN7, 0U)) +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \ + PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \ + PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U)) + +/* + * GPIOC setup: + * + * PC0 - MEMS_CS (output pushpull maximum). + * PC1 - PIN1 (input pullup). + * PC2 - PIN2 (input pullup). + * PC3 - PIN3 (input pullup). + * PC4 - PIN4 (input pullup). + * PC5 - PIN5 (input pullup). + * PC6 - LED_RED (output pushpull maximum). + * PC7 - LED_BLUE (output pushpull maximum). + * PC8 - LED_ORANGE (output pushpull maximum). + * PC9 - LED_GREEN (output pushpull maximum). + * PC10 - PIN10 (input pullup). + * PC11 - PIN11 (input pullup). + * PC12 - PIN12 (input pullup). + * PC13 - PIN13 (input pullup). + * PC14 - OSC32_IN (input floating). + * PC15 - OSC32_OUT (input floating). + */ +#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \ + PIN_MODE_INPUT(GPIOC_PIN1) | \ + PIN_MODE_INPUT(GPIOC_PIN2) | \ + PIN_MODE_INPUT(GPIOC_PIN3) | \ + PIN_MODE_INPUT(GPIOC_PIN4) | \ + PIN_MODE_INPUT(GPIOC_PIN5) | \ + PIN_MODE_OUTPUT(GPIOC_LED_RED) | \ + PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \ + PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \ + PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \ + PIN_MODE_INPUT(GPIOC_PIN10) | \ + PIN_MODE_INPUT(GPIOC_PIN11) | \ + PIN_MODE_INPUT(GPIOC_PIN12) | \ + PIN_MODE_INPUT(GPIOC_PIN13) | \ + PIN_MODE_INPUT(GPIOC_OSC32_IN) | \ + PIN_MODE_INPUT(GPIOC_OSC32_OUT)) +#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \ + PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \ + PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \ + PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \ + PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT)) +#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ + PIN_OSPEED_HIGH(GPIOC_LED_RED) | \ + PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \ + PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \ + PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ + PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \ + PIN_OSPEED_HIGH(GPIOC_OSC32_OUT)) +#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ + PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \ + PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \ + PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \ + PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ + PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \ + PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT)) +#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \ + PIN_ODR_HIGH(GPIOC_PIN1) | \ + PIN_ODR_HIGH(GPIOC_PIN2) | \ + PIN_ODR_HIGH(GPIOC_PIN3) | \ + PIN_ODR_HIGH(GPIOC_PIN4) | \ + PIN_ODR_HIGH(GPIOC_PIN5) | \ + PIN_ODR_LOW(GPIOC_LED_RED) | \ + PIN_ODR_LOW(GPIOC_LED_BLUE) | \ + PIN_ODR_LOW(GPIOC_LED_ORANGE) | \ + PIN_ODR_LOW(GPIOC_LED_GREEN) | \ + PIN_ODR_HIGH(GPIOC_PIN10) | \ + PIN_ODR_HIGH(GPIOC_PIN11) | \ + PIN_ODR_HIGH(GPIOC_PIN12) | \ + PIN_ODR_HIGH(GPIOC_PIN13) | \ + PIN_ODR_HIGH(GPIOC_OSC32_IN) | \ + PIN_ODR_HIGH(GPIOC_OSC32_OUT)) +#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \ + PIN_AFIO_AF(GPIOC_LED_BLUE, 0U)) +#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \ + PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \ + PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U)) + +/* + * GPIOD setup: + * + * PD0 - PIN0 (input pullup). + * PD1 - PIN1 (input pullup). + * PD2 - PIN2 (input pullup). + * PD3 - PIN3 (input pullup). + * PD4 - PIN4 (input pullup). + * PD5 - PIN5 (input pullup). + * PD6 - PIN6 (input pullup). + * PD7 - PIN7 (input pullup). + * PD8 - PIN8 (input pullup). + * PD9 - PIN9 (input pullup). + * PD10 - PIN10 (input pullup). + * PD11 - PIN11 (input pullup). + * PD12 - PIN12 (input pullup). + * PD13 - PIN13 (input pullup). + * PD14 - PIN14 (input pullup). + * PD15 - PIN15 (input pullup). + */ +#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ + PIN_MODE_INPUT(GPIOD_PIN1) | \ + PIN_MODE_INPUT(GPIOD_PIN2) | \ + PIN_MODE_INPUT(GPIOD_PIN3) | \ + PIN_MODE_INPUT(GPIOD_PIN4) | \ + PIN_MODE_INPUT(GPIOD_PIN5) | \ + PIN_MODE_INPUT(GPIOD_PIN6) | \ + PIN_MODE_INPUT(GPIOD_PIN7) | \ + PIN_MODE_INPUT(GPIOD_PIN8) | \ + PIN_MODE_INPUT(GPIOD_PIN9) | \ + PIN_MODE_INPUT(GPIOD_PIN10) | \ + PIN_MODE_INPUT(GPIOD_PIN11) | \ + PIN_MODE_INPUT(GPIOD_PIN12) | \ + PIN_MODE_INPUT(GPIOD_PIN13) | \ + PIN_MODE_INPUT(GPIOD_PIN14) | \ + PIN_MODE_INPUT(GPIOD_PIN15)) +#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) +#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOD_PIN15)) +#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN15)) +#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ + PIN_ODR_HIGH(GPIOD_PIN1) | \ + PIN_ODR_HIGH(GPIOD_PIN2) | \ + PIN_ODR_HIGH(GPIOD_PIN3) | \ + PIN_ODR_HIGH(GPIOD_PIN4) | \ + PIN_ODR_HIGH(GPIOD_PIN5) | \ + PIN_ODR_HIGH(GPIOD_PIN6) | \ + PIN_ODR_HIGH(GPIOD_PIN7) | \ + PIN_ODR_HIGH(GPIOD_PIN8) | \ + PIN_ODR_HIGH(GPIOD_PIN9) | \ + PIN_ODR_HIGH(GPIOD_PIN10) | \ + PIN_ODR_HIGH(GPIOD_PIN11) | \ + PIN_ODR_HIGH(GPIOD_PIN12) | \ + PIN_ODR_HIGH(GPIOD_PIN13) | \ + PIN_ODR_HIGH(GPIOD_PIN14) | \ + PIN_ODR_HIGH(GPIOD_PIN15)) +#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN7, 0U)) +#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN15, 0U)) + +/* + * GPIOE setup: + * + * PE0 - PIN0 (input pullup). + * PE1 - PIN1 (input pullup). + * PE2 - PIN2 (input pullup). + * PE3 - PIN3 (input pullup). + * PE4 - PIN4 (input pullup). + * PE5 - PIN5 (input pullup). + * PE6 - PIN6 (input pullup). + * PE7 - PIN7 (input pullup). + * PE8 - PIN8 (input pullup). + * PE9 - PIN9 (input pullup). + * PE10 - PIN10 (input pullup). + * PE11 - PIN11 (input pullup). + * PE12 - PIN12 (input pullup). + * PE13 - PIN13 (input pullup). + * PE14 - PIN14 (input pullup). + * PE15 - PIN15 (input pullup). + */ +#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ + PIN_MODE_INPUT(GPIOE_PIN1) | \ + PIN_MODE_INPUT(GPIOE_PIN2) | \ + PIN_MODE_INPUT(GPIOE_PIN3) | \ + PIN_MODE_INPUT(GPIOE_PIN4) | \ + PIN_MODE_INPUT(GPIOE_PIN5) | \ + PIN_MODE_INPUT(GPIOE_PIN6) | \ + PIN_MODE_INPUT(GPIOE_PIN7) | \ + PIN_MODE_INPUT(GPIOE_PIN8) | \ + PIN_MODE_INPUT(GPIOE_PIN9) | \ + PIN_MODE_INPUT(GPIOE_PIN10) | \ + PIN_MODE_INPUT(GPIOE_PIN11) | \ + PIN_MODE_INPUT(GPIOE_PIN12) | \ + PIN_MODE_INPUT(GPIOE_PIN13) | \ + PIN_MODE_INPUT(GPIOE_PIN14) | \ + PIN_MODE_INPUT(GPIOE_PIN15)) +#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) +#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOE_PIN15)) +#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN15)) +#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ + PIN_ODR_HIGH(GPIOE_PIN1) | \ + PIN_ODR_HIGH(GPIOE_PIN2) | \ + PIN_ODR_HIGH(GPIOE_PIN3) | \ + PIN_ODR_HIGH(GPIOE_PIN4) | \ + PIN_ODR_HIGH(GPIOE_PIN5) | \ + PIN_ODR_HIGH(GPIOE_PIN6) | \ + PIN_ODR_HIGH(GPIOE_PIN7) | \ + PIN_ODR_HIGH(GPIOE_PIN8) | \ + PIN_ODR_HIGH(GPIOE_PIN9) | \ + PIN_ODR_HIGH(GPIOE_PIN10) | \ + PIN_ODR_HIGH(GPIOE_PIN11) | \ + PIN_ODR_HIGH(GPIOE_PIN12) | \ + PIN_ODR_HIGH(GPIOE_PIN13) | \ + PIN_ODR_HIGH(GPIOE_PIN14) | \ + PIN_ODR_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN7, 0U)) +#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN15, 0U)) + +/* + * GPIOF setup: + * + * PF0 - OSC_IN (input floating). + * PF1 - OSC_OUT (input floating). + * PF2 - PIN2 (input pullup). + * PF3 - PIN3 (input pullup). + * PF4 - PIN4 (input pullup). + * PF5 - PIN5 (input pullup). + * PF6 - PIN6 (input pullup). + * PF7 - PIN7 (input pullup). + * PF8 - PIN8 (input pullup). + * PF9 - PIN9 (input pullup). + * PF10 - PIN10 (input pullup). + * PF11 - PIN11 (input pullup). + * PF12 - PIN12 (input pullup). + * PF13 - PIN13 (input pullup). + * PF14 - PIN14 (input pullup). + * PF15 - PIN15 (input pullup). + */ +#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \ + PIN_MODE_INPUT(GPIOF_OSC_OUT) | \ + PIN_MODE_INPUT(GPIOF_PIN2) | \ + PIN_MODE_INPUT(GPIOF_PIN3) | \ + PIN_MODE_INPUT(GPIOF_PIN4) | \ + PIN_MODE_INPUT(GPIOF_PIN5) | \ + PIN_MODE_INPUT(GPIOF_PIN6) | \ + PIN_MODE_INPUT(GPIOF_PIN7) | \ + PIN_MODE_INPUT(GPIOF_PIN8) | \ + PIN_MODE_INPUT(GPIOF_PIN9) | \ + PIN_MODE_INPUT(GPIOF_PIN10) | \ + PIN_MODE_INPUT(GPIOF_PIN11) | \ + PIN_MODE_INPUT(GPIOF_PIN12) | \ + PIN_MODE_INPUT(GPIOF_PIN13) | \ + PIN_MODE_INPUT(GPIOF_PIN14) | \ + PIN_MODE_INPUT(GPIOF_PIN15)) +#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \ + PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) +#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \ + PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOF_PIN15)) +#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \ + PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN15)) +#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \ + PIN_ODR_HIGH(GPIOF_OSC_OUT) | \ + PIN_ODR_HIGH(GPIOF_PIN2) | \ + PIN_ODR_HIGH(GPIOF_PIN3) | \ + PIN_ODR_HIGH(GPIOF_PIN4) | \ + PIN_ODR_HIGH(GPIOF_PIN5) | \ + PIN_ODR_HIGH(GPIOF_PIN6) | \ + PIN_ODR_HIGH(GPIOF_PIN7) | \ + PIN_ODR_HIGH(GPIOF_PIN8) | \ + PIN_ODR_HIGH(GPIOF_PIN9) | \ + PIN_ODR_HIGH(GPIOF_PIN10) | \ + PIN_ODR_HIGH(GPIOF_PIN11) | \ + PIN_ODR_HIGH(GPIOF_PIN12) | \ + PIN_ODR_HIGH(GPIOF_PIN13) | \ + PIN_ODR_HIGH(GPIOF_PIN14) | \ + PIN_ODR_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \ + PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN7, 0U)) +#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN15, 0U)) + + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* BOARD_H */ diff --git a/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.mk b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.mk new file mode 100644 index 000000000..b98dcdd26 --- /dev/null +++ b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY diff --git a/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg new file mode 100644 index 000000000..9c7cf4fd7 --- /dev/null +++ b/keyboards/cannonkeys/instant60/boards/ST_STM32F072B_DISCOVERY/cfg/board.chcfg @@ -0,0 +1,703 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!-- STM32F0xx board Template --> +<board + xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" + xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd"> + <configuration_settings> + <templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path> + <output_path>..</output_path> + <hal_version>3.0.x</hal_version> + </configuration_settings> + <board_name>ST STM32F072B-Discovery</board_name> + <board_id>ST_STM32F072B_DISCOVERY</board_id> + <board_functions></board_functions> + <subtype>STM32F072xB</subtype> + <clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0" + LSEBypass="false" LSEDrive="3 High Drive (default)" /> + <ports> + <GPIOA> + <pin0 + ID="BUTTON" + Type="PushPull" + Speed="Minimum" + Resistor="Floating" + Level="High" + Mode="Input" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin4 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin7 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin11 + ID="USB_DM" + Type="PushPull" + Speed="Minimum" + Resistor="Floating" + Level="High" + Mode="Input" + Alternate="0" /> + <pin12 + ID="USB_DP" + Type="PushPull" + Speed="Minimum" + Resistor="Floating" + Level="High" + Mode="Input" + Alternate="0" /> + <pin13 + ID="SWDIO" + Type="PushPull" + Speed="Maximum" + Resistor="PullUp" + Level="High" + Mode="Alternate" + Alternate="0" /> + <pin14 + ID="SWCLK" + Type="PushPull" + Speed="Maximum" + Resistor="PullDown" + Level="High" + Mode="Alternate" + Alternate="0" /> + <pin15 + ID="" + Type="PushPull" + Speed="Maximum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + </GPIOA> + <GPIOB> + <pin0 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Speed="Maximum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Speed="Maximum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin4 + ID="" + Type="PushPull" + Speed="Maximum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin7 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin11 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin12 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin13 + ID="SPI2_SCK" + Type="PushPull" + Speed="Minimum" + Resistor="Floating" + Level="High" + Mode="Alternate" + Alternate="0" /> + <pin14 + ID="SPI2_MISO" + Type="PushPull" + Speed="Minimum" + Resistor="Floating" + Level="High" + Mode="Alternate" + Alternate="0" /> + <pin15 + ID="SPI2_MOSI" + Type="PushPull" + Speed="Minimum" + Resistor="Floating" + Level="High" + Mode="Alternate" + Alternate="0" /> + </GPIOB> + <GPIOC> + <pin0 + ID="MEMS_CS" + Type="PushPull" + Speed="Maximum" + Resistor="Floating" + Level="High" + Mode="Output" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin4 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin6 + ID="LED_RED" + Type="PushPull" + Speed="Maximum" + Resistor="Floating" + Level="Low" + Mode="Output" + Alternate="0" /> + <pin7 + ID="LED_BLUE" + Type="PushPull" + Speed="Maximum" + Resistor="Floating" + Level="Low" + Mode="Output" + Alternate="0" /> + <pin8 + ID="LED_ORANGE" + Type="PushPull" + Speed="Maximum" + Resistor="Floating" + Level="Low" + Mode="Output" + Alternate="0" ></pin8> + <pin9 + ID="LED_GREEN" + Type="PushPull" + Speed="Maximum" + Resistor="Floating" + Level="Low" + Mode="Output" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin11 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin12 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin13 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin14 + ID="OSC32_IN" + Type="PushPull" + Speed="Maximum" + Resistor="Floating" + Level="High" + Mode="Input" + Alternate="0" /> + <pin15 + ID="OSC32_OUT" + Type="PushPull" + Speed="Maximum" + Resistor="Floating" + Level="High" + Mode="Input" + Alternate="0" /> + </GPIOC> + <GPIOD> + <pin0 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin1 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin4 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin7 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin11 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin12 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin13 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin14 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin15 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + </GPIOD> + <GPIOE> + <pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + <pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp" + Level="High" Mode="Input" Alternate="0" /> + </GPIOE> + <GPIOF> + <pin0 + ID="OSC_IN" + Type="PushPull" + Speed="Minimum" + Resistor="Floating" + Level="High" + Mode="Input" + Alternate="0" /> + <pin1 + ID="OSC_OUT" + Type="PushPull" + Speed="Minimum" + Resistor="Floating" + Level="High" + Mode="Input" + Alternate="0" /> + <pin2 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin3 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin4 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin5 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin6 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin7 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin8 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin9 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin10 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin11 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin12 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin13 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin14 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + <pin15 + ID="" + Type="PushPull" + Speed="Minimum" + Resistor="PullUp" + Level="High" + Mode="Input" + Alternate="0" /> + </GPIOF> + </ports> +</board> diff --git a/keyboards/cannonkeys/instant60/bootloader_defs.h b/keyboards/cannonkeys/instant60/bootloader_defs.h new file mode 100644 index 000000000..02c48c4e6 --- /dev/null +++ b/keyboards/cannonkeys/instant60/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here (page 175): + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800 diff --git a/keyboards/cannonkeys/instant60/chconf.h b/keyboards/cannonkeys/instant60/chconf.h new file mode 100644 index 000000000..99fa8ce39 --- /dev/null +++ b/keyboards/cannonkeys/instant60/chconf.h @@ -0,0 +1,524 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 10000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 2 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 0 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/* Use __WFI in the idle thread for waiting. Does lower the power + * consumption. */ +#define CORTEX_ENABLE_WFI_IDLE TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE FALSE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP FALSE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS FALSE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/cannonkeys/instant60/config.h b/keyboards/cannonkeys/instant60/config.h new file mode 100644 index 000000000..d7554c172 --- /dev/null +++ b/keyboards/cannonkeys/instant60/config.h @@ -0,0 +1,92 @@ +/* +Copyright 2015 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCA04 +#define PRODUCT_ID 0x1600 +#define DEVICE_VER 0x0001 +/* in python2: list(u"whatever".encode('utf-16-le')) */ +/* at most 32 characters or the ugly hack in usb_main.c borks */ +#define MANUFACTURER CannonKeys +#define PRODUCT Instant60 +#define DESCRIPTION Instant 60 Keyboard + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +#define MATRIX_COL_PINS { B2, B10, B11, A9, A15, B3, B4, B5, B6, B7, B8, B9, C13, C14, C15 } +#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 } +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_LEVELS 6 +#define BACKLIGHT_BREATHING +#define BREATHING_PERIOD 6 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGBLIGHT_ANIMATIONS + +#define WS2812_LED_N 14 +#define RGBLED_NUM WS2812_LED_N +#define PORT_WS2812 GPIOB +#define PIN_WS2812 15 +#define WS2812_SPI SPID2 + + +// EEPROM usage +// TODO: refactor with new user EEPROM code (coming soon) +#define EEPROM_MAGIC 0x451F +#define EEPROM_MAGIC_ADDR 32 +// Bump this every time we change what we store +// This will automatically reset the EEPROM with defaults +// and avoid loading invalid data from the EEPROM +#define EEPROM_VERSION 0x01 +#define EEPROM_VERSION_ADDR 34 + +#define EEPROM_CUSTOM_BACKLIGHT 804 + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/cannonkeys/instant60/halconf.h b/keyboards/cannonkeys/instant60/halconf.h new file mode 100644 index 000000000..38743e090 --- /dev/null +++ b/keyboards/cannonkeys/instant60/halconf.h @@ -0,0 +1,354 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 1 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/keyboards/cannonkeys/instant60/instant60.c b/keyboards/cannonkeys/instant60/instant60.c new file mode 100644 index 000000000..25b7099b0 --- /dev/null +++ b/keyboards/cannonkeys/instant60/instant60.c @@ -0,0 +1 @@ +#include "instant60.h" diff --git a/keyboards/cannonkeys/instant60/instant60.h b/keyboards/cannonkeys/instant60/instant60.h new file mode 100644 index 000000000..cca1b9a29 --- /dev/null +++ b/keyboards/cannonkeys/instant60/instant60.h @@ -0,0 +1,17 @@ +#pragma once + +#include "quantum.h" + +#define LAYOUT_default( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, \ + K40, K41, K42, K45, K49, K4A, K4B, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO}, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, KC_NO, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, KC_NO, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, KC_NO, KC_NO, K4E } \ +} diff --git a/keyboards/cannonkeys/instant60/keymaps/default/keymap.c b/keyboards/cannonkeys/instant60/keymaps/default/keymap.c new file mode 100644 index 000000000..e898a3f3b --- /dev/null +++ b/keyboards/cannonkeys/instant60/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +/* +Copyright 2012,2013 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _BASE 0 +#define _FN1 1 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_default( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FN1), KC_RCTL + ), + + [_FN1] = LAYOUT_default( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ + RGB_TOG, RGB_MOD, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + BL_BRTG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + BL_INC, BL_DEC, BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + KC_GRV, _______, _______, _______, _______, _______, _______, RESET + ) +}; diff --git a/keyboards/cannonkeys/instant60/mcuconf.h b/keyboards/cannonkeys/instant60/mcuconf.h new file mode 100644 index 000000000..048eb4df6 --- /dev/null +++ b/keyboards/cannonkeys/instant60/mcuconf.h @@ -0,0 +1,176 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +/* + * STM32F0xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 3...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F0xx_MCUCONF +// #define STM32F070xB + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_HSI_ENABLED TRUE +#define STM32_HSI14_ENABLED TRUE +#define STM32_HSI48_ENABLED FALSE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED FALSE +#define STM32_LSE_ENABLED FALSE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSI_DIV2 +#define STM32_PREDIV_VALUE 1 +#define STM32_PLLMUL_VALUE 12 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE STM32_PPRE_DIV1 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK +#define STM32_ADCPRE STM32_ADCPRE_DIV4 +#define STM32_ADCSW STM32_ADCSW_HSI14 +#define STM32_USBSW STM32_USBSW_HSI48 +#define STM32_CECSW STM32_CECSW_HSI +#define STM32_I2C1SW STM32_I2C1SW_HSI +#define STM32_USART1SW STM32_USART1SW_PCLK +#define STM32_RTCSEL STM32_RTCSEL_LSI + +/* + * ADC driver system settings. + */ +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 2 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2 + +/* + * EXT driver system settings. + */ +#define STM32_EXT_EXTI0_1_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI2_3_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI4_15_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI16_IRQ_PRIORITY 3 +#define STM32_EXT_EXTI17_IRQ_PRIORITY 3 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 2 +#define STM32_GPT_TIM2_IRQ_PRIORITY 2 +#define STM32_GPT_TIM3_IRQ_PRIORITY 2 +#define STM32_GPT_TIM14_IRQ_PRIORITY 2 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_IRQ_PRIORITY 3 +#define STM32_I2C_I2C2_IRQ_PRIORITY 3 +#define STM32_I2C_USE_DMA TRUE +#define STM32_I2C_I2C1_DMA_PRIORITY 1 +#define STM32_I2C_I2C2_DMA_PRIORITY 1 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 3 +#define STM32_ICU_TIM2_IRQ_PRIORITY 3 +#define STM32_ICU_TIM3_IRQ_PRIORITY 3 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 TRUE +#define STM32_PWM_TIM1_IRQ_PRIORITY 3 +#define STM32_PWM_TIM2_IRQ_PRIORITY 3 +#define STM32_PWM_TIM3_IRQ_PRIORITY 3 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USART1_PRIORITY 3 +#define STM32_SERIAL_USART2_PRIORITY 3 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 TRUE +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_IRQ_PRIORITY 2 +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 2 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USART1_IRQ_PRIORITY 3 +#define STM32_UART_USART2_IRQ_PRIORITY 3 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_USB1 TRUE +#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE +#define STM32_USB_USB1_LP_IRQ_PRIORITY 3 + +#endif /* _MCUCONF_H_ */ diff --git a/keyboards/cannonkeys/instant60/readme.md b/keyboards/cannonkeys/instant60/readme.md new file mode 100644 index 000000000..9cd91e951 --- /dev/null +++ b/keyboards/cannonkeys/instant60/readme.md @@ -0,0 +1,12 @@ +# Instant60 + +Instant60 Keyboard + +Keyboard Maintainer: [Andrew Kannan](https://github.com/awkannan1) +Hardware Supported: STM32F072CBT6 + +Make example for this keyboard (after setting up your build environment): + + make cannonkeys/instant60:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cannonkeys/instant60/rules.mk b/keyboards/cannonkeys/instant60/rules.mk new file mode 100644 index 000000000..cd366c76a --- /dev/null +++ b/keyboards/cannonkeys/instant60/rules.mk @@ -0,0 +1,56 @@ +# project specific files +# SRC = ssd1306.c +## chip/board settings +# the next two should match the directories in +# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F0xx +# linker script to use +# it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ +# or <this_dir>/ld/ +MCU_LDSCRIPT = STM32F072xB +# startup code to use +# is should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f0xx +# it should exist either in <chibios>/os/hal/boards/ +# or <this_dir>/boards +BOARD = ST_STM32F072B_DISCOVERY +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m0 +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 6 +# If you want to be able to jump to bootloader from firmware on STM32 MCUs, +# set the correct BOOTLOADER_ADDRESS. Either set it here, or define it in +# ./bootloader_defs.h or in ./boards/<FOO>/bootloader_defs.h (if you have +# a custom board definition that you plan to reuse). +# If you're not setting it here, leave it commented out. +# It is chip dependent, the correct number can be looked up here (page 175): +# http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf +# This also requires a patch to chibios: +# <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch +#STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 + +# Build Options +# comment out to disable the options. +# + +# project specific files +VPATH += keyboards/cannonkeys/stm32f072 +SRC = keyboard.c \ + led.c + +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +NKRO_ENABLE = yes # USB Nkey Rollover +CUSTOM_MATRIX = no # Custom matrix file +# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason +RGBLIGHT_ENABLE = yes + +# RAW_ENABLE = yes +# DYNAMIC_KEYMAP_ENABLE = yes + diff --git a/keyboards/cannonkeys/stm32f072/keyboard.c b/keyboards/cannonkeys/stm32f072/keyboard.c new file mode 100644 index 000000000..4316d5186 --- /dev/null +++ b/keyboards/cannonkeys/stm32f072/keyboard.c @@ -0,0 +1,120 @@ +#include "keyboard.h" +#include "ch.h" +#include "hal.h" +#include "led_custom.h" +#include "util.h" +#include "quantum.h" + +#include "tmk_core/common/eeprom.h" + +#include "ws2812.h" + +backlight_config_t kb_backlight_config = { + .enable = true, + .breathing = true, + .level = BACKLIGHT_LEVELS +}; + + +bool eeprom_is_valid(void) +{ + return (eeprom_read_word(((void*)EEPROM_MAGIC_ADDR)) == EEPROM_MAGIC && + eeprom_read_byte(((void*)EEPROM_VERSION_ADDR)) == EEPROM_VERSION); +} + +void eeprom_set_valid(bool valid) +{ + eeprom_update_word(((void*)EEPROM_MAGIC_ADDR), valid ? EEPROM_MAGIC : 0xFFFF); + eeprom_update_byte(((void*)EEPROM_VERSION_ADDR), valid ? EEPROM_VERSION : 0xFF); +} + +void eeprom_reset(void) +{ + eeprom_set_valid(false); + eeconfig_disable(); +} + +void save_backlight_config_to_eeprom(){ + eeprom_update_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT, kb_backlight_config.raw); +} + +void load_custom_config(){ + kb_backlight_config.raw = eeprom_read_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT); +} + +void eeprom_init_kb(void) +{ + // If the EEPROM has the magic, the data is good. + // OK to load from EEPROM. + if (eeprom_is_valid()) { + load_custom_config(); + } else { + // Save the magic number last, in case saving was interrupted + eeprom_set_valid(true); + } +} + +void matrix_init_kb(void){ + eeprom_init_kb(); + /* MOSI pin*/ + palSetPadMode(PORT_WS2812, PIN_WS2812, PAL_MODE_ALTERNATE(0)); + wait_ms(500); + +#ifdef RGBLIGHT_ENABLE + leds_init(); +#endif + backlight_init_ports(); +} + +void matrix_scan_kb(void) +{ + #ifdef RGBLIGHT_ENABLE + rgblight_task(); + #endif +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case BL_INC: + if (record->event.pressed) { + kb_backlight_config.level = kb_backlight_config.level + 1; + if(kb_backlight_config.level > BACKLIGHT_LEVELS){ + kb_backlight_config.level = BACKLIGHT_LEVELS; + } + backlight_set(kb_backlight_config.level); + save_backlight_config_to_eeprom(); + } + return false; + case BL_TOGG: + if (record->event.pressed) { + kb_backlight_config.enable = !kb_backlight_config.enable; + if(kb_backlight_config.enable){ + backlight_set(kb_backlight_config.level); + } else { + backlight_set(0); + } + save_backlight_config_to_eeprom(); + } + return false; + + case BL_DEC: + if (record->event.pressed) { + if(kb_backlight_config.level <= 1){ + kb_backlight_config.level = 0; + } else { + kb_backlight_config.level = kb_backlight_config.level - 1; + } + backlight_set(kb_backlight_config.level); + save_backlight_config_to_eeprom(); + } + return false; + case BL_BRTG: + if (record->event.pressed) { + kb_backlight_config.breathing = !kb_backlight_config.breathing; + breathing_toggle(); + save_backlight_config_to_eeprom(); + } + return false; + } + return true; +} diff --git a/keyboards/cannonkeys/stm32f072/keyboard.h b/keyboards/cannonkeys/stm32f072/keyboard.h new file mode 100644 index 000000000..94c973d61 --- /dev/null +++ b/keyboards/cannonkeys/stm32f072/keyboard.h @@ -0,0 +1,23 @@ +#pragma once + +#include "quantum.h" + +typedef union { + uint8_t raw; + struct { + bool enable :1; + bool breathing : 1; + uint8_t level :6; + }; +} backlight_config_t; + +// Backlighting +extern backlight_config_t kb_backlight_config; +extern bool kb_backlight_breathing; +void backlight_init_ports(void); +void backlight_set(uint8_t level); +bool is_breathing(void); +void breathing_enable(void); +void breathing_disable(void); +void load_custom_config(void); +void save_backlight_config_to_eeprom(void); diff --git a/keyboards/cannonkeys/stm32f072/led.c b/keyboards/cannonkeys/stm32f072/led.c new file mode 100644 index 000000000..d69d94685 --- /dev/null +++ b/keyboards/cannonkeys/stm32f072/led.c @@ -0,0 +1,252 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "hal.h" +#include "led_custom.h" +#include "keyboard.h" +#include "printf.h" + +static void breathing_callback(PWMDriver *pwmp); + +static PWMConfig pwmCFG = { + 0xFFFF, /* PWM clock frequency */ + 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ + NULL, /* No Callback */ + { + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} + }, + 0, /* HW dependent part.*/ + 0 +}; + +static PWMConfig pwmCFG_breathing = { + 0xFFFF, /* 10kHz PWM clock frequency */ + 256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */ + breathing_callback, /* Breathing Callback */ + { + {PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */ + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL}, + {PWM_OUTPUT_DISABLED, NULL} + }, + 0, /* HW dependent part.*/ + 0 +}; + +// See http://jared.geek.nz/2013/feb/linear-led-pwm +static uint16_t cie_lightness(uint16_t v) { + if (v <= 5243) // if below 8% of max + return v / 9; // same as dividing by 900% + else { + uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare + // to get a useful result with integer division, we shift left in the expression above + // and revert what we've done again after squaring. + y = y * y * y >> 8; + if (y > 0xFFFFUL) // prevent overflow + return 0xFFFFU; + else + return (uint16_t) y; + } +} + + +uint8_t get_backlight_level(void){ + return kb_backlight_config.level; +} + +void backlight_init_ports(void) { + printf("backlight_init_ports()\n"); + palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1)); + pwmStart(&PWMD3, &pwmCFG); + // pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3, 0xFFFF,cie_lightness(0xFFFF))); + if(kb_backlight_config.enable){ + if(kb_backlight_config.breathing){ + breathing_enable(); + } else{ + backlight_set(kb_backlight_config.level); + } + } else { + backlight_set(0); + } + +} + +void backlight_set(uint8_t level) { + printf("backlight_set(%d)\n", level); + uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS)); + printf("duty: (%d)\n", duty); + if (level == 0) { + // Turn backlight off + pwmDisableChannel(&PWMD3, 0); + } else { + // Turn backlight on + if(!is_breathing()){ + pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3,0xFFFF,duty)); + } + } +} + + +uint8_t backlight_tick = 0; + +void backlight_task(void) { +} + +#define BREATHING_NO_HALT 0 +#define BREATHING_HALT_OFF 1 +#define BREATHING_HALT_ON 2 +#define BREATHING_STEPS 128 + +static uint8_t breathing_period = BREATHING_PERIOD; +static uint8_t breathing_halt = BREATHING_NO_HALT; +static uint16_t breathing_counter = 0; + +bool is_breathing(void) { + return PWMD3.config == &pwmCFG_breathing; +} + +#define breathing_min() do {breathing_counter = 0;} while (0) +#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0) + + +void breathing_interrupt_enable(void){ + pwmStop(&PWMD3); + pwmStart(&PWMD3, &pwmCFG_breathing); + chSysLockFromISR(); + pwmEnablePeriodicNotification(&PWMD3); + pwmEnableChannelI( + &PWMD3, + 0, + PWM_FRACTION_TO_WIDTH( + &PWMD3, + 0xFFFF, + 0xFFFF + ) + ); + chSysUnlockFromISR(); +} + +void breathing_interrupt_disable(void){ + pwmStop(&PWMD3); + pwmStart(&PWMD3, &pwmCFG); +} + +void breathing_enable(void) +{ + breathing_counter = 0; + breathing_halt = BREATHING_NO_HALT; + breathing_interrupt_enable(); +} + +void breathing_pulse(void) +{ + if (get_backlight_level() == 0) + breathing_min(); + else + breathing_max(); + breathing_halt = BREATHING_HALT_ON; + breathing_interrupt_enable(); +} + +void breathing_disable(void) +{ + printf("breathing_disable()\n"); + breathing_interrupt_disable(); + // Restore backlight level + backlight_set(get_backlight_level()); +} + +void breathing_self_disable(void) +{ + if (get_backlight_level() == 0) + breathing_halt = BREATHING_HALT_OFF; + else + breathing_halt = BREATHING_HALT_ON; +} + +void breathing_toggle(void) { + if (is_breathing()){ + printf("disable breathing\n"); + breathing_disable(); + } else { + printf("enable breathing\n"); + breathing_enable(); + } +} + +void breathing_period_set(uint8_t value) +{ + if (!value) + value = 1; + breathing_period = value; +} + +void breathing_period_default(void) { + breathing_period_set(BREATHING_PERIOD); +} + +void breathing_period_inc(void) +{ + breathing_period_set(breathing_period+1); +} + +void breathing_period_dec(void) +{ + breathing_period_set(breathing_period-1); +} + +/* To generate breathing curve in python: + * from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)] + */ +static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; + +// Use this before the cie_lightness function. +static inline uint16_t scale_backlight(uint16_t v) { + return v / BACKLIGHT_LEVELS * get_backlight_level(); +} + +static void breathing_callback(PWMDriver *pwmp) +{ + (void)pwmp; + uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS; + // resetting after one period to prevent ugly reset at overflow. + breathing_counter = (breathing_counter + 1) % (breathing_period * 256); + uint8_t index = breathing_counter / interval % BREATHING_STEPS; + + if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || + ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) + { + breathing_interrupt_disable(); + } + + uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256)); + + chSysLockFromISR(); + pwmEnableChannelI( + &PWMD3, + 0, + PWM_FRACTION_TO_WIDTH( + &PWMD3, + 0xFFFF, + duty + ) + ); + chSysUnlockFromISR(); +} diff --git a/keyboards/cannonkeys/stm32f072/led_custom.h b/keyboards/cannonkeys/stm32f072/led_custom.h new file mode 100644 index 000000000..28e0f02ed --- /dev/null +++ b/keyboards/cannonkeys/stm32f072/led_custom.h @@ -0,0 +1,6 @@ +#pragma once + +void backlight_task(void); +void breathing_interrupt_disable(void); +void breathing_interrupt_enable(void); +void breathing_toggle(void); diff --git a/keyboards/cannonkeys/stm32f072/ws2812.c b/keyboards/cannonkeys/stm32f072/ws2812.c new file mode 100644 index 000000000..665763931 --- /dev/null +++ b/keyboards/cannonkeys/stm32f072/ws2812.c @@ -0,0 +1,150 @@ +#include "ch.h" +#include "hal.h" + +#include "ws2812.h" + +#define BYTES_FOR_LED_BYTE 4 +#define NB_COLORS 3 +#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS +#define DATA_SIZE BYTES_FOR_LED*NB_LEDS +#define RESET_SIZE 200 + +// Define the spi your LEDs are plugged to here +#define LEDS_SPI WS2812_SPI +// Define the number of LEDs you wish to control in your LED strip +#define NB_LEDS RGBLED_NUM + +#define LED_SPIRAL 0 + +static uint8_t txbuf[DATA_SIZE + RESET_SIZE]; +static uint8_t get_protocol_eq(uint8_t data, int pos); + +/* + * This lib is meant to be used asynchronously, thus the colors contained in + * the txbuf will be sent in loop, so that the colors are always the ones you + * put in the table (the user thus have less to worry about) + * + * Since the data are sent via DMA, and the call to spiSend is a blocking one, + * the processor ressources are not used to much, if you see your program being + * too slow, simply add a: + * chThdSleepMilliseconds(x); + * after the spiSend, where you increment x untill you are satisfied with your + * program speed, another trick may be to lower this thread priority : your call + */ +static THD_WORKING_AREA(LEDS_THREAD_WA, 128); +static THD_FUNCTION(ledsThread, arg) { + (void) arg; + while(1){ + spiSend(&LEDS_SPI, DATA_SIZE + RESET_SIZE, txbuf); + } +} + +#if LED_SPIRAL +/* + * 'Led spiral' is a simple demo in which we put all the leds to the same + * color, where this color does all the hsv circle in loop. + * If you want to launch the thread that will chage the led colors to the + * appropriate value, simply set LED_SPIRAL to 1. + */ + +static THD_WORKING_AREA(HSVTRANS_WA, 128); +static THD_FUNCTION(hsv_transThread, arg) { + (void) arg; + hsv_color color = {0, 255, 255}; + while(1){ + color.h += 1; + color.h %= 256; + set_leds_color_hsv(color); + chThdSleepMilliseconds(50); + } +} +#endif + +static const SPIConfig spicfg = { + NULL, + GPIOB, + 15, + SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us +}; + +/* + * Function used to initialize the driver. + * + * Starts by shutting off all the LEDs. + * Then gets access on the LED_SPI driver. + * May eventually launch an animation on the LEDs (e.g. a thread setting the + * txbuff values) + */ +void leds_init(void){ + for(int i = 0; i < RESET_SIZE; i++) + txbuf[DATA_SIZE+i] = 0x00; + spiAcquireBus(&LEDS_SPI); /* Acquire ownership of the bus. */ + spiStart(&LEDS_SPI, &spicfg); /* Setup transfer parameters. */ + spiSelect(&LEDS_SPI); /* Slave Select assertion. */ + chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL); +#if LED_SPIRAL + chThdCreateStatic(HSVTRANS_WA, sizeof(HSVTRANS_WA), + NORMALPRIO, hsv_transThread, NULL); +#endif +} + +/* + * As the trick here is to use the SPI to send a huge pattern of 0 and 1 to + * the ws2812b protocol, we use this helper function to translate bytes into + * 0s and 1s for the LED (with the appropriate timing). + */ +static uint8_t get_protocol_eq(uint8_t data, int pos){ + uint8_t eq = 0; + if (data & (1 << (2*(3-pos)))) + eq = 0b1110; + else + eq = 0b1000; + if (data & (2 << (2*(3-pos)))) + eq += 0b11100000; + else + eq += 0b10000000; + return eq; +} + +// +///* +// * If you want to set a LED's color in the RGB color space, simply call this +// * function with a hsv_color containing the desired color and the index of the +// * led on the LED strip (starting from 0, the first one being the closest the +// * first plugged to the board) +// * +// * Only set the color of the LEDs through the functions given by this API +// * (unless you really know what you are doing) +// */ +void set_led_color_rgb(LED_TYPE color, int pos){ + for(int j = 0; j < 4; j++) + txbuf[BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j); + for(int j = 0; j < 4; j++) + txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j); + for(int j = 0; j < 4; j++) + txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j); +} + + +void WS2812_init(void) { + leds_init(); +} + +void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) { + uint8_t i = 0; + while (i < number_of_leds) { + set_led_color_rgb(ledarray[i], i); + i++; + } +} + + +void set_leds_color_rgb(LED_TYPE color){ + for(int i = 0; i < NB_LEDS; i++) + set_led_color_rgb(color, i); +} + + +void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds) { + +} diff --git a/keyboards/cannonkeys/stm32f072/ws2812.h b/keyboards/cannonkeys/stm32f072/ws2812.h new file mode 100644 index 000000000..3b61ddcfa --- /dev/null +++ b/keyboards/cannonkeys/stm32f072/ws2812.h @@ -0,0 +1,20 @@ +#pragma once + +#include "hal.h" +#include "rgblight_types.h" + + +void set_leds_color_rgb(LED_TYPE color); +void set_led_color_rgb(LED_TYPE color, int pos); +void leds_init(void); + + + // This is what users will use to interface with this +void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds); +void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds); + + +void WS2812_init(void); +void WS2812_set_color( uint8_t index, uint8_t red, uint8_t green, uint8_t blue ); +void WS2812_set_color_all( uint8_t red, uint8_t green, uint8_t blue ); +void WS2812_send_colors(void); |