diff options
Diffstat (limited to 'lib/lufa/Bootloaders/MassStorage')
17 files changed, 5017 insertions, 0 deletions
diff --git a/lib/lufa/Bootloaders/MassStorage/BootloaderAPI.c b/lib/lufa/Bootloaders/MassStorage/BootloaderAPI.c new file mode 100644 index 000000000..491c506d0 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/BootloaderAPI.c @@ -0,0 +1,76 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Bootloader user application API functions. + */ + +#include "BootloaderAPI.h" + +void BootloaderAPI_ErasePage(const uint32_t Address) +{ + boot_page_erase_safe(Address); + boot_spm_busy_wait(); + boot_rww_enable(); +} + +void BootloaderAPI_WritePage(const uint32_t Address) +{ + boot_page_write_safe(Address); + boot_spm_busy_wait(); + boot_rww_enable(); +} + +void BootloaderAPI_FillWord(const uint32_t Address, const uint16_t Word) +{ + boot_page_fill_safe(Address, Word); +} + +uint8_t BootloaderAPI_ReadSignature(const uint16_t Address) +{ + return boot_signature_byte_get(Address); +} + +uint8_t BootloaderAPI_ReadFuse(const uint16_t Address) +{ + return boot_lock_fuse_bits_get(Address); +} + +uint8_t BootloaderAPI_ReadLock(void) +{ + return boot_lock_fuse_bits_get(GET_LOCK_BITS); +} + +void BootloaderAPI_WriteLock(const uint8_t LockBits) +{ + boot_lock_bits_set_safe(LockBits); +} + diff --git a/lib/lufa/Bootloaders/MassStorage/BootloaderAPI.h b/lib/lufa/Bootloaders/MassStorage/BootloaderAPI.h new file mode 100644 index 000000000..4889b4c0d --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/BootloaderAPI.h @@ -0,0 +1,63 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for BootloaderAPI.c. + */ + +#ifndef _BOOTLOADER_API_H_ +#define _BOOTLOADER_API_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/boot.h> + #include <stdbool.h> + + #include <LUFA/Common/Common.h> + + /* Macros: */ + #if AUX_BOOT_SECTION_SIZE > 0 + #define AUX_BOOT_SECTION __attribute__((section(".boot_aux"))) + #else + #define AUX_BOOT_SECTION + #endif + + /* Function Prototypes: */ + void BootloaderAPI_ErasePage(const uint32_t Address); + void BootloaderAPI_WritePage(const uint32_t Address); + void BootloaderAPI_FillWord(const uint32_t Address, const uint16_t Word); + uint8_t BootloaderAPI_ReadSignature(const uint16_t Address); + uint8_t BootloaderAPI_ReadFuse(const uint16_t Address); + uint8_t BootloaderAPI_ReadLock(void); + void BootloaderAPI_WriteLock(const uint8_t LockBits); + +#endif + diff --git a/lib/lufa/Bootloaders/MassStorage/BootloaderAPITable.S b/lib/lufa/Bootloaders/MassStorage/BootloaderAPITable.S new file mode 100644 index 000000000..44eb15ea9 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/BootloaderAPITable.S @@ -0,0 +1,102 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#if AUX_BOOT_SECTION_SIZE > 0 +#warning Using a AUX bootloader section in addition to the defined bootloader space (see documentation). + +; Trampoline to jump over the AUX bootloader section to the start of the bootloader, +; on devices where an AUX bootloader section is used. +.section .boot_aux_trampoline, "ax" +.global Boot_AUX_Trampoline +Boot_AUX_Trampoline: + jmp BOOT_START_ADDR +#endif + +; Trampolines to actual API implementations if the target address is outside the +; range of a rjmp instruction (can happen with large bootloader sections) +.section .apitable_trampolines, "ax" +.global BootloaderAPI_Trampolines +BootloaderAPI_Trampolines: + + BootloaderAPI_ErasePage_Trampoline: + jmp BootloaderAPI_ErasePage + BootloaderAPI_WritePage_Trampoline: + jmp BootloaderAPI_WritePage + BootloaderAPI_FillWord_Trampoline: + jmp BootloaderAPI_FillWord + BootloaderAPI_ReadSignature_Trampoline: + jmp BootloaderAPI_ReadSignature + BootloaderAPI_ReadFuse_Trampoline: + jmp BootloaderAPI_ReadFuse + BootloaderAPI_ReadLock_Trampoline: + jmp BootloaderAPI_ReadLock + BootloaderAPI_WriteLock_Trampoline: + jmp BootloaderAPI_WriteLock + BootloaderAPI_UNUSED1: + ret + BootloaderAPI_UNUSED2: + ret + BootloaderAPI_UNUSED3: + ret + BootloaderAPI_UNUSED4: + ret + BootloaderAPI_UNUSED5: + ret + + + +; API function jump table +.section .apitable_jumptable, "ax" +.global BootloaderAPI_JumpTable +BootloaderAPI_JumpTable: + + rjmp BootloaderAPI_ErasePage_Trampoline + rjmp BootloaderAPI_WritePage_Trampoline + rjmp BootloaderAPI_FillWord_Trampoline + rjmp BootloaderAPI_ReadSignature_Trampoline + rjmp BootloaderAPI_ReadFuse_Trampoline + rjmp BootloaderAPI_ReadLock_Trampoline + rjmp BootloaderAPI_WriteLock_Trampoline + rjmp BootloaderAPI_UNUSED1 ; UNUSED ENTRY 1 + rjmp BootloaderAPI_UNUSED2 ; UNUSED ENTRY 2 + rjmp BootloaderAPI_UNUSED3 ; UNUSED ENTRY 3 + rjmp BootloaderAPI_UNUSED4 ; UNUSED ENTRY 4 + rjmp BootloaderAPI_UNUSED5 ; UNUSED ENTRY 5 + + + +; Bootloader table signatures and information +.section .apitable_signatures, "ax" +.global BootloaderAPI_Signatures +BootloaderAPI_Signatures: + + .long BOOT_START_ADDR ; Start address of the bootloader + .word 0xDF30 ; Signature for the MS class bootloader, V1 + .word 0xDCFB ; Signature for a LUFA class bootloader diff --git a/lib/lufa/Bootloaders/MassStorage/BootloaderMassStorage.c b/lib/lufa/Bootloaders/MassStorage/BootloaderMassStorage.c new file mode 100644 index 000000000..6c9697b66 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/BootloaderMassStorage.c @@ -0,0 +1,263 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Main source file for the Mass Storage class bootloader. This file contains the complete bootloader logic. + */ + +#define INCLUDE_FROM_BOOTLOADER_MASSSTORAGE_C +#include "BootloaderMassStorage.h" + +/** LUFA Mass Storage Class driver interface configuration and state information. This structure is + * passed to all Mass Storage Class driver functions, so that multiple instances of the same class + * within a device can be differentiated from one another. + */ +USB_ClassInfo_MS_Device_t Disk_MS_Interface = + { + .Config = + { + .InterfaceNumber = INTERFACE_ID_MassStorage, + .DataINEndpoint = + { + .Address = MASS_STORAGE_IN_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .DataOUTEndpoint = + { + .Address = MASS_STORAGE_OUT_EPADDR, + .Size = MASS_STORAGE_IO_EPSIZE, + .Banks = 1, + }, + .TotalLUNs = 1, + }, + }; + +/** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run + * via a soft reset. When cleared, the bootloader will abort, the USB interface will shut down and the application + * started via a forced watchdog reset. + */ +bool RunBootloader = true; + +/** Magic lock for forced application start. If the HWBE fuse is programmed and BOOTRST is unprogrammed, the bootloader + * will start if the /HWB line of the AVR is held low and the system is reset. However, if the /HWB line is still held + * low when the application attempts to start via a watchdog reset, the bootloader will re-start. If set to the value + * \ref MAGIC_BOOT_KEY the special init function \ref Application_Jump_Check() will force the application to start. + */ +uint16_t MagicBootKey ATTR_NO_INIT; + +/** Indicates if the bootloader is allowed to exit immediately if \ref RunBootloader is \c false. During shutdown all + * pending commands must be processed before jumping to the user-application, thus this tracks the main program loop + * iterations since a SCSI command from the host was received. + */ +static uint8_t TicksSinceLastCommand = 0; + + +/** Special startup routine to check if the bootloader was started via a watchdog reset, and if the magic application + * start key has been loaded into \ref MagicBootKey. If the bootloader started via the watchdog and the key is valid, + * this will force the user application to start via a software jump. + */ +void Application_Jump_Check(void) +{ + bool JumpToApplication = false; + + #if (BOARD == BOARD_LEONARDO) + /* Enable pull-up on the IO13 pin so we can use it to select the mode */ + PORTC |= (1 << 7); + Delay_MS(10); + + /* If IO13 is not jumpered to ground, start the user application instead */ + JumpToApplication = ((PINC & (1 << 7)) != 0); + + /* Disable pull-up after the check has completed */ + PORTC &= ~(1 << 7); + #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1)) + /* Disable JTAG debugging */ + JTAG_DISABLE(); + + /* Enable pull-up on the JTAG TCK pin so we can use it to select the mode */ + PORTF |= (1 << 4); + Delay_MS(10); + + /* If the TCK pin is not jumpered to ground, start the user application instead */ + JumpToApplication = ((PINF & (1 << 4)) != 0); + + /* Re-enable JTAG debugging */ + JTAG_ENABLE(); + #else + /* Check if the device's BOOTRST fuse is set */ + if (boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS) & FUSE_BOOTRST) + { + /* If the reset source was not an external reset or the key is correct, clear it and jump to the application */ + if (!(MCUSR & (1 << EXTRF)) || (MagicBootKey == MAGIC_BOOT_KEY)) + JumpToApplication = true; + + /* Clear reset source */ + MCUSR &= ~(1 << EXTRF); + } + else + { + /* If the reset source was the bootloader and the key is correct, clear it and jump to the application; + * this can happen in the HWBE fuse is set, and the HBE pin is low during the watchdog reset */ + if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY)) + JumpToApplication = true; + + /* Clear reset source */ + MCUSR &= ~(1 << WDRF); + } + #endif + + /* Don't run the user application if the reset vector is blank (no app loaded) */ + bool ApplicationValid = (pgm_read_word_near(0) != 0xFFFF); + + /* If a request has been made to jump to the user application, honor it */ + if (JumpToApplication && ApplicationValid) + { + /* Turn off the watchdog */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Clear the boot key and jump to the user application */ + MagicBootKey = 0; + + // cppcheck-suppress constStatement + ((void (*)(void))0x0000)(); + } +} + +/** Main program entry point. This routine configures the hardware required by the application, then + * enters a loop to run the application tasks in sequence. + */ +int main(void) +{ + SetupHardware(); + + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); + GlobalInterruptEnable(); + + while (RunBootloader || TicksSinceLastCommand++ < 0xFF) + { + MS_Device_USBTask(&Disk_MS_Interface); + USB_USBTask(); + } + + /* Disconnect from the host - USB interface will be reset later along with the AVR */ + USB_Detach(); + + /* Unlock the forced application start mode of the bootloader if it is restarted */ + MagicBootKey = MAGIC_BOOT_KEY; + + /* Enable the watchdog and force a timeout to reset the AVR */ + wdt_enable(WDTO_250MS); + + for (;;); +} + +/** Configures the board hardware and chip peripherals for the demo's functionality. */ +static void SetupHardware(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + /* Relocate the interrupt vector table to the bootloader section */ + MCUCR = (1 << IVCE); + MCUCR = (1 << IVSEL); + + /* Hardware Initialization */ + LEDs_Init(); + USB_Init(); + + /* Bootloader active LED toggle timer initialization */ + TIMSK1 = (1 << TOIE1); + TCCR1B = ((1 << CS11) | (1 << CS10)); +} + +/** ISR to periodically toggle the LEDs on the board to indicate that the bootloader is active. */ +ISR(TIMER1_OVF_vect, ISR_BLOCK) +{ + LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2); +} + +/** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs. */ +void EVENT_USB_Device_Connect(void) +{ + /* Indicate USB enumerating */ + LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING); +} + +/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via + * the status LEDs and stops the Mass Storage management task. + */ +void EVENT_USB_Device_Disconnect(void) +{ + /* Indicate USB not ready */ + LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY); +} + +/** Event handler for the library USB Configuration Changed event. */ +void EVENT_USB_Device_ConfigurationChanged(void) +{ + bool ConfigSuccess = true; + + /* Setup Mass Storage Data Endpoints */ + ConfigSuccess &= MS_Device_ConfigureEndpoints(&Disk_MS_Interface); + + /* Indicate endpoint configuration success or failure */ + LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR); +} + +/** Event handler for the library USB Control Request reception event. */ +void EVENT_USB_Device_ControlRequest(void) +{ + MS_Device_ProcessControlRequest(&Disk_MS_Interface); +} + +/** Mass Storage class driver callback function the reception of SCSI commands from the host, which must be processed. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface configuration structure being referenced + */ +bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + bool CommandSuccess; + + LEDs_SetAllLEDs(LEDMASK_USB_BUSY); + CommandSuccess = SCSI_DecodeSCSICommand(MSInterfaceInfo); + LEDs_SetAllLEDs(LEDMASK_USB_READY); + + /* Signal that a command was processed, must not exit bootloader yet */ + TicksSinceLastCommand = 0; + + return CommandSuccess; +} diff --git a/lib/lufa/Bootloaders/MassStorage/BootloaderMassStorage.h b/lib/lufa/Bootloaders/MassStorage/BootloaderMassStorage.h new file mode 100644 index 000000000..c9ddee4d7 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/BootloaderMassStorage.h @@ -0,0 +1,99 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for BootloaderMassStorage.c. + */ + +#ifndef _BOOTLOADER_MASS_STORAGE_H_ +#define _BOOTLOADER_MASS_STORAGE_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/wdt.h> + #include <avr/power.h> + #include <avr/interrupt.h> + #include <string.h> + + #include "Descriptors.h" + #include "Config/AppConfig.h" + + #include "Lib/SCSI.h" + + #include <LUFA/Drivers/Board/LEDs.h> + #include <LUFA/Drivers/USB/USB.h> + #include <LUFA/Platform/Platform.h> + + /* Preprocessor Checks: */ + #if !defined(__OPTIMIZE_SIZE__) + #error This bootloader requires that it be optimized for size, not speed, to fit into the target device. Change optimization settings and try again. + #endif + + /* Macros: */ + /** LED mask for the library LED driver, to indicate that the USB interface is not ready. */ + #define LEDMASK_USB_NOTREADY LEDS_LED1 + + /** LED mask for the library LED driver, to indicate that the USB interface is enumerating. */ + #define LEDMASK_USB_ENUMERATING (LEDS_LED2 | LEDS_LED3) + + /** LED mask for the library LED driver, to indicate that the USB interface is ready. */ + #define LEDMASK_USB_READY (LEDS_LED2 | LEDS_LED4) + + /** LED mask for the library LED driver, to indicate that an error has occurred in the USB interface. */ + #define LEDMASK_USB_ERROR (LEDS_LED1 | LEDS_LED3) + + /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ + #define LEDMASK_USB_BUSY LEDS_LED2 + + /** Magic bootloader key to unlock forced application start mode. */ + #define MAGIC_BOOT_KEY 0xDC42 + + /* Global Variables: */ + extern bool RunBootloader; + + /* Function Prototypes: */ + int main(void) AUX_BOOT_SECTION; + + void Application_Jump_Check(void) ATTR_INIT_SECTION(3); + + void EVENT_USB_Device_Connect(void) AUX_BOOT_SECTION; + void EVENT_USB_Device_Disconnect(void) AUX_BOOT_SECTION; + void EVENT_USB_Device_ConfigurationChanged(void) AUX_BOOT_SECTION; + void EVENT_USB_Device_ControlRequest(void) AUX_BOOT_SECTION; + + bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; + + #if defined(INCLUDE_FROM_BOOTLOADER_MASSSTORAGE_C) + static void SetupHardware(void) AUX_BOOT_SECTION; + #endif + +#endif + diff --git a/lib/lufa/Bootloaders/MassStorage/BootloaderMassStorage.txt b/lib/lufa/Bootloaders/MassStorage/BootloaderMassStorage.txt new file mode 100644 index 000000000..0fea9d9fb --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/BootloaderMassStorage.txt @@ -0,0 +1,240 @@ +/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Mass Storage Class USB AVR Bootloader + * + * \section Sec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * \li Series 7 USB AVRs (AT90USBxxx7) + * \li Series 6 USB AVRs (AT90USBxxx6) + * \li Series 4 USB AVRs (ATMEGAxxU4) - <i>See \ref SSec_Aux_Space</i> + * \li ATMEGA32U2 - <i>See \ref SSec_Aux_Space</i> + * + * \section Sec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Device</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Mass Storage Device</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>Bulk-Only Transport</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>USBIF Mass Storage Standard \n + * USB Bulk-Only Transport Standard \n + * SCSI Primary Commands Specification \n + * SCSI Block Commands Specification</td> + * </tr> + * <tr> + * <td><b>Supported USB Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section Sec_Description Project Description: + * + * This bootloader enumerates to the host as a Mass Storage device, capable of reading and writing a new binary + * firmware image file, to load firmware onto the AVR. + * + * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit + * into 6KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to + * edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. + * + * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the + * bootloader from the normal user application. + * + * \warning <b>THIS BOOTLOADER IS NOT SECURE.</b> Malicious entities can recover written data, even if the device + * lockbits are set. + * + * \section Sec_Running Running the Bootloader + * + * On the USB AVR8 devices, setting the \c HWBE device fuse will cause the bootloader to run if the \c HWB pin of + * the AVR is grounded when the device is reset. + * + * The are two behaviours of this bootloader, depending on the device's fuses: + * + * <b>If the device's BOOTRST fuse is set</b>, the bootloader will run any time the system is reset from + * the external reset pin, unless no valid user application has been loaded. To initiate the bootloader, the + * device's external reset pin should be grounded momentarily. + * + * <b>If the device's BOOTRST fuse is not set</b>, the bootloader will run only if initiated via a software + * jump, or if the \c HWB pin was low during the last device reset (if the \c HWBE fuse is set). + * + * For board specific exceptions to the above, see below. + * + * \subsection SSec_XPLAIN Atmel Xplain Board + * Ground the USB AVR JTAG's \c TCK pin to ground when powering on the board to start the bootloader. This assumes the + * \c HWBE fuse is cleared and the \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board. + * + * \subsection SSec_Leonardo Arduino Leonardo Board + * Ground \c IO13 when powering the board to start the bootloader. This assumes the \c HWBE fuse is cleared and the + * \c BOOTRST fuse is set as the HWBE pin is not user accessible on this board. + * + * \section Sec_Installation Driver Installation + * + * This bootloader uses the Mass Storage drivers inbuilt into all modern operating systems, thus no additional + * drivers need to be supplied for correct operation. + * + * \section Sec_HostApp Host Controller Application + * + * This bootloader is compatible with all operating systems that support the FAT12 file system format. To reprogram the + * device, overwrite a file stored on the virtual FAT filesystem with a new binary (BIN format) image. Remember to safely + * remove your device from the host using the host OS's ejection APIs, to ensure all data is correctly flushed to the + * bootloader's virtual filesystem and not cached in the OS's file system driver. + * + * The current device firmware can be read from the device by reading a file from the virtual FAT filesystem. Two files will + * be present: + * - <b>FLASH.BIN</b>, representing the AVR's internal flash memory + * - <b>EEPROM.BIN</b>, representing the AVR's internal EEPROM memory + * + * To convert an existing Intel HEX (.HEX) program file to a binary (.BIN) file suitable for this bootloader, run: + * \code + * avr-objcopy -O binary -R .eeprom -R .fuse -R .lock -R .signature input.hex output.bin + * \endcode + * From a terminal, replacing <tt>input.hex</tt> and <tt>output.bin</tt> with the respective input and output filenames. + * AVR EEPROM data files in Intel HEX format (.EEP) uses a similar technique: + * \code + * avr-objcopy -O binary input.eep output.bin + * \endcode + * + * \warning This bootloader is currently <b>incompatible with the Apple MacOS X OS Finder GUI</b>, due to the + * large amount of meta files this OS attempts to write to the disk along with the new binaries. On + * this platform, firmwares must be copied to the disk via the Terminal application only to prevent + * firmware corruption. + * + * \section Sec_API User Application API + * + * Several user application functions for FLASH and other special memory area manipulations are exposed by the bootloader, + * allowing the user application to call into the bootloader at runtime to read and write FLASH data. + * + * By default, the bootloader API jump table is located 32 bytes from the end of the device's FLASH memory, and follows the + * following layout: + * + * \code + * #define BOOTLOADER_API_TABLE_SIZE 32 + * #define BOOTLOADER_API_TABLE_START ((FLASHEND + 1UL) - BOOTLOADER_API_TABLE_SIZE) + * #define BOOTLOADER_API_CALL(Index) (void*)((BOOTLOADER_API_TABLE_START + (Index * 2)) / 2) + * + * void (*BootloaderAPI_ErasePage)(uint32_t Address) = BOOTLOADER_API_CALL(0); + * void (*BootloaderAPI_WritePage)(uint32_t Address) = BOOTLOADER_API_CALL(1); + * void (*BootloaderAPI_FillWord)(uint32_t Address, uint16_t Word) = BOOTLOADER_API_CALL(2); + * uint8_t (*BootloaderAPI_ReadSignature)(uint16_t Address) = BOOTLOADER_API_CALL(3); + * uint8_t (*BootloaderAPI_ReadFuse)(uint16_t Address) = BOOTLOADER_API_CALL(4); + * uint8_t (*BootloaderAPI_ReadLock)(void) = BOOTLOADER_API_CALL(5); + * void (*BootloaderAPI_WriteLock)(uint8_t LockBits) = BOOTLOADER_API_CALL(6); + * + * #define BOOTLOADER_MAGIC_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 2)) + * #define BOOTLOADER_MAGIC_SIGNATURE 0xDCFB + * + * #define BOOTLOADER_CLASS_SIGNATURE_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 4)) + * #define BOOTLOADER_MASS_STORAGE_SIGNATURE 0xDF30 + * + * #define BOOTLOADER_ADDRESS_START (BOOTLOADER_API_TABLE_START + (BOOTLOADER_API_TABLE_SIZE - 8)) + * #define BOOTLOADER_ADDRESS_LENGTH 4 + * \endcode + * + * From the application the API support of the bootloader can be detected by reading the FLASH memory bytes located at address + * \c BOOTLOADER_MAGIC_SIGNATURE_START and comparing them to the value \c BOOTLOADER_MAGIC_SIGNATURE. The class of bootloader + * can be determined by reading the FLASH memory bytes located at address \c BOOTLOADER_CLASS_SIGNATURE_START and comparing them + * to the value \c BOOTLOADER_MASS_STORAGE_SIGNATURE. The start address of the bootloader can be retrieved by reading the bytes + * of FLASH memory starting from address \c BOOTLOADER_ADDRESS_START. + * + * \subsection SSec_Aux_Space Auxiliary Bootloader Section + * To make the bootloader function on smaller devices (those with a physical bootloader section of smaller than 6KB) a second + * section of memory (called the <i>Auxiliary Bootloader Section</i>) is added before the start of the real bootloader section, + * and is filled with a portion of the bootloader code. This allows smaller devices to run the bootloader, at the cost of an + * additional portion of the device's FLASH (the bootloader section size in KB subtracted from the 6KB total size). A small + * trampoline is inserted at the start of the auxiliary section so that the bootloader will run normally in the case of a blank + * application section. + * + * On devices supporting a 8KB bootloader section size, the AUX section is not created in the final binary. + * + * \subsection SSec_API_MemLayout Device Memory Map + * The following illustration indicates the final memory map of the device when loaded with the bootloader. + * + * \verbatim + * +----------------------------+ 0x0000 + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * | User Application | + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * | | + * +----------------------------+ FLASHEND - BOOT_SECTION_SIZE - BOOT_AUX_SECTION_SIZE + * | Booloader Start Trampoline | + * | (Not User App. Accessible) | + * +----------------------------+ FLASHEND - BOOT_SECTION_SIZE - BOOT_AUX_SECTION_SIZE + 4 + * | | + * | Auxiliary Bootloader | + * | Space for Smaller Devices | + * | (Not User App. Accessible) | + * | | + * +----------------------------+ FLASHEND - BOOT_SECTION_SIZE + * | | + * | Bootloader Application | + * | (Not User App. Accessible) | + * | | + * +----------------------------+ FLASHEND - 96 + * | API Table Trampolines | + * | (Not User App. Accessible) | + * +----------------------------+ FLASHEND - 32 + * | Bootloader API Table | + * | (User App. Accessible) | + * +----------------------------+ FLASHEND - 8 + * | Bootloader ID Constants | + * | (User App. Accessible) | + * +----------------------------+ FLASHEND + * \endverbatim + * + * \section Sec_KnownIssues Known Issues: + * + * \par In some cases, the application is not fully loaded into the device. + * Write-caching on some operating systems may interfere with the normal + * operation of the bootloader. Write caching should be disabled when using the + * Mass Storage bootloader, or the file system synced via an appropriate command + * (such as the OS's normal disk ejection command) before disconnecting the device. + * + * \section Sec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <th><b>Define Name:</b></th> + * <th><b>Location:</b></th> + * <th><b>Description:</b></th> + * </tr> + * <tr> + * <td>NO_APP_START_ON_EJECT</td> + * <td>AppConfig.h</td> + * <td>Define to disable automatic start of the loaded application when the virtual + * Mass Storage disk is ejected on the host.</td> + * </tr> + * </table> + */ + diff --git a/lib/lufa/Bootloaders/MassStorage/Config/AppConfig.h b/lib/lufa/Bootloaders/MassStorage/Config/AppConfig.h new file mode 100644 index 000000000..92eb364dc --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/Config/AppConfig.h @@ -0,0 +1,47 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief Application Configuration Header File + * + * This is a header file which is be used to configure LUFA's + * compile time options, as an alternative to the compile time + * constants supplied through a makefile. + * + * For information on what each token does, refer to the + * \ref Sec_Options section of the application documentation. + */ + +#ifndef _APP_CONFIG_H_ +#define _APP_CONFIG_H_ + +// #define NO_APP_START_ON_EJECT + +#endif diff --git a/lib/lufa/Bootloaders/MassStorage/Config/LUFAConfig.h b/lib/lufa/Bootloaders/MassStorage/Config/LUFAConfig.h new file mode 100644 index 000000000..735317867 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/Config/LUFAConfig.h @@ -0,0 +1,93 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * \brief LUFA Library Configuration Header File + * + * This header file is used to configure LUFA's compile time options, + * as an alternative to the compile time constants supplied through + * a makefile. + * + * For information on what each token does, refer to the LUFA + * manual section "Summary of Compile Tokens". + */ + +#ifndef _LUFA_CONFIG_H_ +#define _LUFA_CONFIG_H_ + + #if (ARCH == ARCH_AVR8) + + /* Non-USB Related Configuration Tokens: */ +// #define DISABLE_TERMINAL_CODES + + /* USB Class Driver Related Tokens: */ +// #define HID_HOST_BOOT_PROTOCOL_ONLY +// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here} +// #define HID_USAGE_STACK_DEPTH {Insert Value Here} +// #define HID_MAX_COLLECTIONS {Insert Value Here} +// #define HID_MAX_REPORTITEMS {Insert Value Here} +// #define HID_MAX_REPORT_IDS {Insert Value Here} +// #define NO_CLASS_DRIVER_AUTOFLUSH + + /* General USB Driver Related Tokens: */ + #define ORDERED_EP_CONFIG + #define USE_STATIC_OPTIONS (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL) + #define USB_DEVICE_ONLY +// #define USB_HOST_ONLY +// #define USB_STREAM_TIMEOUT_MS {Insert Value Here} +// #define NO_LIMITED_CONTROLLER_CONNECT + #define NO_SOF_EVENTS + + /* USB Device Mode Driver Related Tokens: */ + #define USE_RAM_DESCRIPTORS +// #define USE_FLASH_DESCRIPTORS +// #define USE_EEPROM_DESCRIPTORS + #define NO_INTERNAL_SERIAL + #define FIXED_CONTROL_ENDPOINT_SIZE 8 + #define DEVICE_STATE_AS_GPIOR 0 + #define FIXED_NUM_CONFIGURATIONS 1 +// #define CONTROL_ONLY_DEVICE + #define INTERRUPT_CONTROL_ENDPOINT + #define NO_DEVICE_REMOTE_WAKEUP + #define NO_DEVICE_SELF_POWER + + /* USB Host Mode Driver Related Tokens: */ +// #define HOST_STATE_AS_GPIOR {Insert Value Here} +// #define USB_HOST_TIMEOUT_MS {Insert Value Here} +// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here} +// #define NO_AUTO_VBUS_MANAGEMENT +// #define INVERTED_VBUS_ENABLE_LINE + + #else + + #error Unsupported architecture for this LUFA configuration file. + + #endif +#endif diff --git a/lib/lufa/Bootloaders/MassStorage/Descriptors.c b/lib/lufa/Bootloaders/MassStorage/Descriptors.c new file mode 100644 index 000000000..e8bdbd4f5 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/Descriptors.c @@ -0,0 +1,157 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * USB Device Descriptors, for library use when in USB device mode. Descriptors are special + * computer-readable structures which the host requests upon device enumeration, to determine + * the device's capabilities and functions. + */ + +#include "Descriptors.h" + + +/** Device descriptor structure. This descriptor, located in SRAM memory, describes the overall + * device characteristics, including the supported USB version, control endpoint size and the + * number of device configurations. The descriptor is read out by the USB host when the enumeration + * process begins. + */ +const USB_Descriptor_Device_t DeviceDescriptor = +{ + .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, + + .USBSpecification = VERSION_BCD(1,1,0), + .Class = USB_CSCP_NoDeviceClass, + .SubClass = USB_CSCP_NoDeviceSubclass, + .Protocol = USB_CSCP_NoDeviceProtocol, + + .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, + + .VendorID = 0x03EB, + .ProductID = 0x2045, + .ReleaseNumber = VERSION_BCD(0,0,1), + + .ManufacturerStrIndex = NO_DESCRIPTOR, + .ProductStrIndex = NO_DESCRIPTOR, + .SerialNumStrIndex = NO_DESCRIPTOR, + + .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS +}; + +/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage + * of the device in one of its supported configurations, including information about any device interfaces + * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting + * a configuration so that the host may correctly communicate with the USB device. + */ +const USB_Descriptor_Configuration_t ConfigurationDescriptor = +{ + .Config = + { + .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, + + .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), + .TotalInterfaces = 1, + + .ConfigurationNumber = 1, + .ConfigurationStrIndex = NO_DESCRIPTOR, + + .ConfigAttributes = USB_CONFIG_ATTR_RESERVED, + + .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) + }, + + .MS_Interface = + { + .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, + + .InterfaceNumber = INTERFACE_ID_MassStorage, + .AlternateSetting = 0, + + .TotalEndpoints = 2, + + .Class = MS_CSCP_MassStorageClass, + .SubClass = MS_CSCP_SCSITransparentSubclass, + .Protocol = MS_CSCP_BulkOnlyTransportProtocol, + + .InterfaceStrIndex = NO_DESCRIPTOR + }, + + .MS_DataInEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = MASS_STORAGE_IN_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = MASS_STORAGE_IO_EPSIZE, + .PollingIntervalMS = 0x05 + }, + + .MS_DataOutEndpoint = + { + .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, + + .EndpointAddress = MASS_STORAGE_OUT_EPADDR, + .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), + .EndpointSize = MASS_STORAGE_IO_EPSIZE, + .PollingIntervalMS = 0x05 + } +}; + +/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" + * documentation) by the application code so that the address and size of a requested descriptor can be given + * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function + * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the + * USB host. + */ +uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint16_t wIndex, + const void** const DescriptorAddress) +{ + const uint8_t DescriptorType = (wValue >> 8); + + const void* Address = NULL; + uint16_t Size = NO_DESCRIPTOR; + + /* If/Else If chain compiles slightly smaller than a switch case */ + if (DescriptorType == DTYPE_Device) + { + Address = &DeviceDescriptor; + Size = sizeof(USB_Descriptor_Device_t); + } + else if (DescriptorType == DTYPE_Configuration) + { + Address = &ConfigurationDescriptor; + Size = sizeof(USB_Descriptor_Configuration_t); + } + + *DescriptorAddress = Address; + return Size; +} + diff --git a/lib/lufa/Bootloaders/MassStorage/Descriptors.h b/lib/lufa/Bootloaders/MassStorage/Descriptors.h new file mode 100644 index 000000000..506f41af8 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/Descriptors.h @@ -0,0 +1,88 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for Descriptors.c. + */ + +#ifndef _DESCRIPTORS_H_ +#define _DESCRIPTORS_H_ + + /* Includes: */ + #include <avr/pgmspace.h> + + #include <LUFA/Drivers/USB/USB.h> + + #include "BootloaderAPI.h" + + /* Macros: */ + /** Endpoint address of the Mass Storage device-to-host data IN endpoint. */ + #define MASS_STORAGE_IN_EPADDR (ENDPOINT_DIR_IN | 3) + + /** Endpoint address of the Mass Storage host-to-device data OUT endpoint. */ + #define MASS_STORAGE_OUT_EPADDR (ENDPOINT_DIR_OUT | 4) + + /** Size in bytes of the Mass Storage data endpoints. */ + #define MASS_STORAGE_IO_EPSIZE 64 + + /* Type Defines: */ + /** Type define for the device configuration descriptor structure. This must be defined in the + * application code, as the configuration descriptor contains several sub-descriptors which + * vary between devices, and which describe the device's usage to the host. + */ + typedef struct + { + USB_Descriptor_Configuration_Header_t Config; + + // Mass Storage Interface + USB_Descriptor_Interface_t MS_Interface; + USB_Descriptor_Endpoint_t MS_DataInEndpoint; + USB_Descriptor_Endpoint_t MS_DataOutEndpoint; + } USB_Descriptor_Configuration_t; + + + /** Enum for the device interface descriptor IDs within the device. Each interface descriptor + * should have a unique ID index associated with it, which can be used to refer to the + * interface from other descriptors. + */ + enum InterfaceDescriptors_t + { + INTERFACE_ID_MassStorage = 0, /**< Mass storage interface descriptor ID */ + }; + + /* Function Prototypes: */ + uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, + const uint16_t wIndex, + const void** const DescriptorAddress) + ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3) AUX_BOOT_SECTION; + +#endif + diff --git a/lib/lufa/Bootloaders/MassStorage/Lib/SCSI.c b/lib/lufa/Bootloaders/MassStorage/Lib/SCSI.c new file mode 100644 index 000000000..3c14eb901 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/Lib/SCSI.c @@ -0,0 +1,294 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * SCSI command processing routines, for SCSI commands issued by the host. Mass Storage + * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, + * which wrap around standard SCSI device commands for controlling the actual storage medium. + */ + +#define INCLUDE_FROM_SCSI_C +#include "SCSI.h" + +/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's + * features and capabilities. + */ +static const SCSI_Inquiry_Response_t InquiryData = + { + .DeviceType = DEVICE_TYPE_BLOCK, + .PeripheralQualifier = 0, + + .Removable = true, + + .Version = 0, + + .ResponseDataFormat = 2, + .NormACA = false, + .TrmTsk = false, + .AERC = false, + + .AdditionalLength = 0x1F, + + .SoftReset = false, + .CmdQue = false, + .Linked = false, + .Sync = false, + .WideBus16Bit = false, + .WideBus32Bit = false, + .RelAddr = false, + + .VendorID = "LUFA", + .ProductID = "Bootloader", + .RevisionID = {'0','.','0','0'}, + }; + +/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE + * command is issued. This gives information on exactly why the last command failed to complete. + */ +static SCSI_Request_Sense_Response_t SenseData = + { + .ResponseCode = 0x70, + .AdditionalLength = 0x0A, + }; + + +/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches + * to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns + * a command failure due to a ILLEGAL REQUEST. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise + */ +bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + bool CommandSuccess = false; + + /* Run the appropriate SCSI command hander function based on the passed command */ + switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) + { + case SCSI_CMD_INQUIRY: + CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); + break; + case SCSI_CMD_REQUEST_SENSE: + CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); + break; + case SCSI_CMD_READ_CAPACITY_10: + CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); + break; + case SCSI_CMD_WRITE_10: + CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE); + break; + case SCSI_CMD_READ_10: + CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ); + break; + case SCSI_CMD_MODE_SENSE_6: + CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo); + break; + case SCSI_CMD_START_STOP_UNIT: +#if !defined(NO_APP_START_ON_EJECT) + /* If the user ejected the volume, signal bootloader exit at next opportunity. */ + RunBootloader = ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[4] & 0x03) != 0x02); +#endif + case SCSI_CMD_SEND_DIAGNOSTIC: + case SCSI_CMD_TEST_UNIT_READY: + case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: + case SCSI_CMD_VERIFY_10: + /* These commands should just succeed, no handling required */ + CommandSuccess = true; + MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; + break; + default: + /* Update the SENSE key to reflect the invalid command */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_INVALID_COMMAND, + SCSI_ASENSEQ_NO_QUALIFIER); + break; + } + + /* Check if command was successfully processed */ + if (CommandSuccess) + { + SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, + SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, + SCSI_ASENSEQ_NO_QUALIFIER); + + return true; + } + + return false; +} + +/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features + * and capabilities to the host. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + uint16_t AllocationLength = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]); + uint16_t BytesTransferred = MIN(AllocationLength, sizeof(InquiryData)); + + /* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */ + if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) || + MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]) + { + /* Optional but unsupported bits set - update the SENSE key and fail the request */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_INVALID_FIELD_IN_CDB, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + + Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL); + + /* Pad out remaining bytes with 0x00 */ + Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); + + /* Finalize the stream transfer to send the last packet */ + Endpoint_ClearIN(); + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; + + return true; +} + +/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, + * including the error code and additional error information so that the host can determine why a command failed to complete. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; + uint8_t BytesTransferred = MIN(AllocationLength, sizeof(SenseData)); + + Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL); + Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); + Endpoint_ClearIN(); + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; + + return true; +} + +/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity + * on the selected Logical Unit (drive), as a number of OS-sized blocks. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + Endpoint_Write_32_BE(LUN_MEDIA_BLOCKS - 1); + Endpoint_Write_32_BE(SECTOR_SIZE_BYTES); + Endpoint_ClearIN(); + + /* Succeed the command and update the bytes transferred counter */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; + + return true; +} + +/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address + * and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual + * reading and writing of the data. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE) + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const bool IsDataRead) +{ + uint16_t BlockAddress; + uint16_t TotalBlocks; + + /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ + BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); + + /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ + TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); + + /* Check if the block address is outside the maximum allowable value for the LUN */ + if (BlockAddress >= LUN_MEDIA_BLOCKS) + { + /* Block address is invalid, update SENSE key and return command fail */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, + SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + + /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ + for (uint16_t i = 0; i < TotalBlocks; i++) + { + if (IsDataRead == DATA_READ) + VirtualFAT_ReadBlock(BlockAddress + i); + else + VirtualFAT_WriteBlock(BlockAddress + i); + } + + /* Update the bytes transferred counter and succeed the command */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * SECTOR_SIZE_BYTES); + + return true; +} + +/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about + * the SCSI device, as well as the device's Write Protect status. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean \c true if the command completed successfully, \c false otherwise. + */ +static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + /* Send an empty header response indicating Write Protect flag is off */ + Endpoint_Write_32_LE(0); + Endpoint_ClearIN(); + + /* Update the bytes transferred counter and succeed the command */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4; + + return true; +} + diff --git a/lib/lufa/Bootloaders/MassStorage/Lib/SCSI.h b/lib/lufa/Bootloaders/MassStorage/Lib/SCSI.h new file mode 100644 index 000000000..419559336 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/Lib/SCSI.h @@ -0,0 +1,84 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Header file for SCSI.c. + */ + +#ifndef _SCSI_H_ +#define _SCSI_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/pgmspace.h> + + #include <LUFA/Drivers/USB/USB.h> + + #include "../BootloaderMassStorage.h" + #include "../Descriptors.h" + #include "VirtualFAT.h" + + /* Macros: */ + /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This + * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about + * the last command failure) in a quick and easy manner. + * + * \param[in] Key New SCSI sense key to set the sense code to + * \param[in] Acode New SCSI additional sense key to set the additional sense code to + * \param[in] Aqual New SCSI additional sense key qualifier to set the additional sense qualifier code to + */ + #define SCSI_SET_SENSE(Key, Acode, Aqual) do { SenseData.SenseKey = (Key); \ + SenseData.AdditionalSenseCode = (Acode); \ + SenseData.AdditionalSenseQualifier = (Aqual); } while (0) + + /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */ + #define DATA_READ true + + /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */ + #define DATA_WRITE false + + /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ + #define DEVICE_TYPE_BLOCK 0x00 + + /* Function Prototypes: */ + bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; + + #if defined(INCLUDE_FROM_SCSI_C) + static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; + static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; + static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; + static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, + const bool IsDataRead) AUX_BOOT_SECTION; + static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) AUX_BOOT_SECTION; + #endif + +#endif + diff --git a/lib/lufa/Bootloaders/MassStorage/Lib/VirtualFAT.c b/lib/lufa/Bootloaders/MassStorage/Lib/VirtualFAT.c new file mode 100644 index 000000000..ffd453128 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/Lib/VirtualFAT.c @@ -0,0 +1,482 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +/** \file + * + * Virtualized FAT12 filesystem implementation, to perform self-programming + * in response to read and write requests to the virtual filesystem by the + * host PC. + */ + +#define INCLUDE_FROM_VIRTUAL_FAT_C +#include "VirtualFAT.h" + +/** FAT filesystem boot sector block, must be the first sector on the physical + * disk so that the host can identify the presence of a FAT filesystem. This + * block is truncated; normally a large bootstrap section is located near the + * end of the block for booting purposes however as this is not meant to be a + * bootable disk it is omitted for space reasons. + * + * \note When returning the boot block to the host, the magic signature 0xAA55 + * must be added to the very end of the block to identify it as a boot + * block. + */ +static const FATBootBlock_t BootBlock = + { + .Bootstrap = {0xEB, 0x3C, 0x90}, + .Description = "mkdosfs", + .SectorSize = SECTOR_SIZE_BYTES, + .SectorsPerCluster = SECTOR_PER_CLUSTER, + .ReservedSectors = 1, + .FATCopies = 2, + .RootDirectoryEntries = (SECTOR_SIZE_BYTES / sizeof(FATDirectoryEntry_t)), + .TotalSectors16 = LUN_MEDIA_BLOCKS, + .MediaDescriptor = 0xF8, + .SectorsPerFAT = 1, + .SectorsPerTrack = (LUN_MEDIA_BLOCKS % 64), + .Heads = (LUN_MEDIA_BLOCKS / 64), + .HiddenSectors = 0, + .TotalSectors32 = 0, + .PhysicalDriveNum = 0, + .ExtendedBootRecordSig = 0x29, + .VolumeSerialNumber = 0x12345678, + .VolumeLabel = "LUFA BOOT ", + .FilesystemIdentifier = "FAT12 ", + }; + +/** FAT 8.3 style directory entry, for the virtual FLASH contents file. */ +static FATDirectoryEntry_t FirmwareFileEntries[] = + { + /* Root volume label entry; disk label is contained in the Filename and + * Extension fields (concatenated) with a special attribute flag - other + * fields are ignored. Should be the same as the label in the boot block. + */ + [DISK_FILE_ENTRY_VolumeID] = + { + .MSDOS_Directory = + { + .Name = "LUFA BOOT ", + .Attributes = FAT_FLAG_VOLUME_NAME, + .Reserved = {0}, + .CreationTime = 0, + .CreationDate = 0, + .StartingCluster = 0, + .Reserved2 = 0, + } + }, + + /* VFAT Long File Name entry for the virtual firmware file; required to + * prevent corruption from systems that are unable to detect the device + * as being a legacy MSDOS style FAT12 volume. */ + [DISK_FILE_ENTRY_FLASH_LFN] = + { + .VFAT_LongFileName = + { + .Ordinal = 1 | FAT_ORDINAL_LAST_ENTRY, + .Attribute = FAT_FLAG_LONG_FILE_NAME, + .Reserved1 = 0, + .Reserved2 = 0, + + .Checksum = FAT_CHECKSUM('F','L','A','S','H',' ',' ',' ','B','I','N'), + + .Unicode1 = 'F', + .Unicode2 = 'L', + .Unicode3 = 'A', + .Unicode4 = 'S', + .Unicode5 = 'H', + .Unicode6 = '.', + .Unicode7 = 'B', + .Unicode8 = 'I', + .Unicode9 = 'N', + .Unicode10 = 0, + .Unicode11 = 0, + .Unicode12 = 0, + .Unicode13 = 0, + } + }, + + /* MSDOS file entry for the virtual Firmware image. */ + [DISK_FILE_ENTRY_FLASH_MSDOS] = + { + .MSDOS_File = + { + .Filename = "FLASH ", + .Extension = "BIN", + .Attributes = 0, + .Reserved = {0}, + .CreationTime = FAT_TIME(1, 1, 0), + .CreationDate = FAT_DATE(14, 2, 1989), + .StartingCluster = 2, + .FileSizeBytes = FLASH_FILE_SIZE_BYTES, + } + }, + + [DISK_FILE_ENTRY_EEPROM_LFN] = + { + .VFAT_LongFileName = + { + .Ordinal = 1 | FAT_ORDINAL_LAST_ENTRY, + .Attribute = FAT_FLAG_LONG_FILE_NAME, + .Reserved1 = 0, + .Reserved2 = 0, + + .Checksum = FAT_CHECKSUM('E','E','P','R','O','M',' ',' ','B','I','N'), + + .Unicode1 = 'E', + .Unicode2 = 'E', + .Unicode3 = 'P', + .Unicode4 = 'R', + .Unicode5 = 'O', + .Unicode6 = 'M', + .Unicode7 = '.', + .Unicode8 = 'B', + .Unicode9 = 'I', + .Unicode10 = 'N', + .Unicode11 = 0, + .Unicode12 = 0, + .Unicode13 = 0, + } + }, + + [DISK_FILE_ENTRY_EEPROM_MSDOS] = + { + .MSDOS_File = + { + .Filename = "EEPROM ", + .Extension = "BIN", + .Attributes = 0, + .Reserved = {0}, + .CreationTime = FAT_TIME(1, 1, 0), + .CreationDate = FAT_DATE(14, 2, 1989), + .StartingCluster = 2 + FILE_CLUSTERS(FLASH_FILE_SIZE_BYTES), + .FileSizeBytes = EEPROM_FILE_SIZE_BYTES, + } + }, + }; + +/** Starting cluster of the virtual FLASH.BIN file on disk, tracked so that the + * offset from the start of the data sector can be determined. On Windows + * systems files are usually replaced using the original file's disk clusters, + * while Linux appears to overwrite with an offset which must be compensated for. + */ +static const uint16_t* FLASHFileStartCluster = &FirmwareFileEntries[DISK_FILE_ENTRY_FLASH_MSDOS].MSDOS_File.StartingCluster; + +/** Starting cluster of the virtual EEPROM.BIN file on disk, tracked so that the + * offset from the start of the data sector can be determined. On Windows + * systems files are usually replaced using the original file's disk clusters, + * while Linux appears to overwrite with an offset which must be compensated for. + */ +static const uint16_t* EEPROMFileStartCluster = &FirmwareFileEntries[DISK_FILE_ENTRY_EEPROM_MSDOS].MSDOS_File.StartingCluster; + +/** Reads a byte of EEPROM out from the EEPROM memory space. + * + * \note This function is required as the avr-libc EEPROM functions do not cope + * with linker relaxations, and a jump longer than 4K of FLASH on the + * larger USB AVRs will break the linker. This function is marked as + * never inlinable and placed into the normal text segment so that the + * call to the EEPROM function will be short even if the AUX boot section + * is used. + * + * \param[in] Address Address of the EEPROM location to read from + * + * \return Read byte of EEPROM data. + */ +static uint8_t ReadEEPROMByte(const uint8_t* const Address) +{ + return eeprom_read_byte(Address); +} + +/** Writes a byte of EEPROM out to the EEPROM memory space. + * + * \note This function is required as the avr-libc EEPROM functions do not cope + * with linker relaxations, and a jump longer than 4K of FLASH on the + * larger USB AVRs will break the linker. This function is marked as + * never inlinable and placed into the normal text segment so that the + * call to the EEPROM function will be short even if the AUX boot section + * is used. + * + * \param[in] Address Address of the EEPROM location to write to + * \param[in] Data New data to write to the EEPROM location + */ +static void WriteEEPROMByte(uint8_t* const Address, + const uint8_t Data) +{ + eeprom_update_byte(Address, Data); +} + +/** Updates a FAT12 cluster entry in the FAT file table with the specified next + * chain index. If the cluster is the last in the file chain, the magic value + * \c 0xFFF should be used. + * + * \note FAT data cluster indexes are offset by 2, so that cluster 2 is the + * first file data cluster on the disk. See the FAT specification. + * + * \param[out] FATTable Pointer to the FAT12 allocation table + * \param[in] Index Index of the cluster entry to update + * \param[in] ChainEntry Next cluster index in the file chain + */ +static void UpdateFAT12ClusterEntry(uint8_t* const FATTable, + const uint16_t Index, + const uint16_t ChainEntry) +{ + /* Calculate the starting offset of the cluster entry in the FAT12 table */ + uint8_t FATOffset = (Index + (Index >> 1)); + bool UpperNibble = ((Index & 1) != 0); + + /* Check if the start of the entry is at an upper nibble of the byte, fill + * out FAT12 entry as required */ + if (UpperNibble) + { + FATTable[FATOffset] = (FATTable[FATOffset] & 0x0F) | ((ChainEntry & 0x0F) << 4); + FATTable[FATOffset + 1] = (ChainEntry >> 4); + } + else + { + FATTable[FATOffset] = ChainEntry; + FATTable[FATOffset + 1] = (FATTable[FATOffset] & 0xF0) | (ChainEntry >> 8); + } +} + +/** Updates a FAT12 cluster chain in the FAT file table with a linear chain of + * the specified length. + * + * \note FAT data cluster indexes are offset by 2, so that cluster 2 is the + * first file data cluster on the disk. See the FAT specification. + * + * \param[out] FATTable Pointer to the FAT12 allocation table + * \param[in] Index Index of the start of the cluster chain to update + * \param[in] ChainLength Length of the chain to write, in clusters + */ +static void UpdateFAT12ClusterChain(uint8_t* const FATTable, + const uint16_t Index, + const uint8_t ChainLength) +{ + for (uint8_t i = 0; i < ChainLength; i++) + { + uint16_t CurrentCluster = Index + i; + uint16_t NextCluster = CurrentCluster + 1; + + /* Mark last cluster as end of file */ + if (i == (ChainLength - 1)) + NextCluster = 0xFFF; + + UpdateFAT12ClusterEntry(FATTable, CurrentCluster, NextCluster); + } +} + +/** Reads or writes a block of data from/to the physical device FLASH using a + * block buffer stored in RAM, if the requested block is within the virtual + * firmware file's sector ranges in the emulated FAT file system. + * + * \param[in] BlockNumber Physical disk block to read from/write to + * \param[in,out] BlockBuffer Pointer to the start of the block buffer in RAM + * \param[in] Read If \c true, the requested block is read, if + * \c false, the requested block is written + */ +static void ReadWriteFLASHFileBlock(const uint16_t BlockNumber, + uint8_t* BlockBuffer, + const bool Read) +{ + uint16_t FileStartBlock = DISK_BLOCK_DataStartBlock + (*FLASHFileStartCluster - 2) * SECTOR_PER_CLUSTER; + uint16_t FileEndBlock = FileStartBlock + (FILE_SECTORS(FLASH_FILE_SIZE_BYTES) - 1); + + /* Range check the write request - abort if requested block is not within the + * virtual firmware file sector range */ + if (!((BlockNumber >= FileStartBlock) && (BlockNumber <= FileEndBlock))) + return; + + #if (FLASHEND > 0xFFFF) + uint32_t FlashAddress = (uint32_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES; + #else + uint16_t FlashAddress = (uint16_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES; + #endif + + if (Read) + { + /* Read out the mapped block of data from the device's FLASH */ + for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i++) + { + #if (FLASHEND > 0xFFFF) + BlockBuffer[i] = pgm_read_byte_far(FlashAddress++); + #else + BlockBuffer[i] = pgm_read_byte(FlashAddress++); + #endif + } + } + else + { + /* Write out the mapped block of data to the device's FLASH */ + for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i += 2) + { + if ((FlashAddress % SPM_PAGESIZE) == 0) + { + /* Erase the given FLASH page, ready to be programmed */ + BootloaderAPI_ErasePage(FlashAddress); + } + + /* Write the next data word to the FLASH page */ + BootloaderAPI_FillWord(FlashAddress, (BlockBuffer[i + 1] << 8) | BlockBuffer[i]); + FlashAddress += 2; + + if ((FlashAddress % SPM_PAGESIZE) == 0) + { + /* Write the filled FLASH page to memory */ + BootloaderAPI_WritePage(FlashAddress - SPM_PAGESIZE); + } + } + } +} + +/** Reads or writes a block of data from/to the physical device EEPROM using a + * block buffer stored in RAM, if the requested block is within the virtual + * firmware file's sector ranges in the emulated FAT file system. + * + * \param[in] BlockNumber Physical disk block to read from/write to + * \param[in,out] BlockBuffer Pointer to the start of the block buffer in RAM + * \param[in] Read If \c true, the requested block is read, if + * \c false, the requested block is written + */ +static void ReadWriteEEPROMFileBlock(const uint16_t BlockNumber, + uint8_t* BlockBuffer, + const bool Read) +{ + uint16_t FileStartBlock = DISK_BLOCK_DataStartBlock + (*EEPROMFileStartCluster - 2) * SECTOR_PER_CLUSTER; + uint16_t FileEndBlock = FileStartBlock + (FILE_SECTORS(EEPROM_FILE_SIZE_BYTES) - 1); + + /* Range check the write request - abort if requested block is not within the + * virtual firmware file sector range */ + if (!((BlockNumber >= FileStartBlock) && (BlockNumber <= FileEndBlock))) + return; + + uint16_t EEPROMAddress = (uint16_t)(BlockNumber - FileStartBlock) * SECTOR_SIZE_BYTES; + + if (Read) + { + /* Read out the mapped block of data from the device's EEPROM */ + for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i++) + BlockBuffer[i] = ReadEEPROMByte((uint8_t*)EEPROMAddress++); + } + else + { + /* Write out the mapped block of data to the device's EEPROM */ + for (uint16_t i = 0; i < SECTOR_SIZE_BYTES; i++) + WriteEEPROMByte((uint8_t*)EEPROMAddress++, BlockBuffer[i]); + } +} + +/** Writes a block of data to the virtual FAT filesystem, from the USB Mass + * Storage interface. + * + * \param[in] BlockNumber Index of the block to write. + */ +void VirtualFAT_WriteBlock(const uint16_t BlockNumber) +{ + uint8_t BlockBuffer[SECTOR_SIZE_BYTES]; + + /* Buffer the entire block to be written from the host */ + Endpoint_Read_Stream_LE(BlockBuffer, sizeof(BlockBuffer), NULL); + Endpoint_ClearOUT(); + + switch (BlockNumber) + { + case DISK_BLOCK_BootBlock: + case DISK_BLOCK_FATBlock1: + case DISK_BLOCK_FATBlock2: + /* Ignore writes to the boot and FAT blocks */ + + break; + + case DISK_BLOCK_RootFilesBlock: + /* Copy over the updated directory entries */ + memcpy(FirmwareFileEntries, BlockBuffer, sizeof(FirmwareFileEntries)); + + break; + + default: + ReadWriteFLASHFileBlock(BlockNumber, BlockBuffer, false); + ReadWriteEEPROMFileBlock(BlockNumber, BlockBuffer, false); + + break; + } +} + +/** Reads a block of data from the virtual FAT filesystem, and sends it to the + * host via the USB Mass Storage interface. + * + * \param[in] BlockNumber Index of the block to read. + */ +void VirtualFAT_ReadBlock(const uint16_t BlockNumber) +{ + uint8_t BlockBuffer[SECTOR_SIZE_BYTES]; + memset(BlockBuffer, 0x00, sizeof(BlockBuffer)); + + switch (BlockNumber) + { + case DISK_BLOCK_BootBlock: + memcpy(BlockBuffer, &BootBlock, sizeof(FATBootBlock_t)); + + /* Add the magic signature to the end of the block */ + BlockBuffer[SECTOR_SIZE_BYTES - 2] = 0x55; + BlockBuffer[SECTOR_SIZE_BYTES - 1] = 0xAA; + + break; + + case DISK_BLOCK_FATBlock1: + case DISK_BLOCK_FATBlock2: + /* Cluster 0: Media type/Reserved */ + UpdateFAT12ClusterEntry(BlockBuffer, 0, 0xF00 | BootBlock.MediaDescriptor); + + /* Cluster 1: Reserved */ + UpdateFAT12ClusterEntry(BlockBuffer, 1, 0xFFF); + + /* Cluster 2 onwards: Cluster chain of FLASH.BIN */ + UpdateFAT12ClusterChain(BlockBuffer, *FLASHFileStartCluster, FILE_CLUSTERS(FLASH_FILE_SIZE_BYTES)); + + /* Cluster 2+n onwards: Cluster chain of EEPROM.BIN */ + UpdateFAT12ClusterChain(BlockBuffer, *EEPROMFileStartCluster, FILE_CLUSTERS(EEPROM_FILE_SIZE_BYTES)); + + break; + + case DISK_BLOCK_RootFilesBlock: + memcpy(BlockBuffer, FirmwareFileEntries, sizeof(FirmwareFileEntries)); + + break; + + default: + ReadWriteFLASHFileBlock(BlockNumber, BlockBuffer, true); + ReadWriteEEPROMFileBlock(BlockNumber, BlockBuffer, true); + + break; + } + + /* Write the entire read block Buffer to the host */ + Endpoint_Write_Stream_LE(BlockBuffer, sizeof(BlockBuffer), NULL); + Endpoint_ClearIN(); +} diff --git a/lib/lufa/Bootloaders/MassStorage/Lib/VirtualFAT.h b/lib/lufa/Bootloaders/MassStorage/Lib/VirtualFAT.h new file mode 100644 index 000000000..ea80eae4d --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/Lib/VirtualFAT.h @@ -0,0 +1,302 @@ +/* + LUFA Library + Copyright (C) Dean Camera, 2017. + + dean [at] fourwalledcubicle [dot] com + www.lufa-lib.org +*/ + +/* + Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaims all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + +#ifndef _VIRTUALFAT_H_ +#define _VIRTUALFAT_H_ + + /* Includes: */ + #include <avr/io.h> + #include <avr/pgmspace.h> + + #include <LUFA/Drivers/USB/USB.h> + + #include "../BootloaderAPI.h" + + /* Macros: */ + /** Size of the virtual FLASH.BIN file in bytes. */ + #define FLASH_FILE_SIZE_BYTES (FLASHEND - (FLASHEND - BOOT_START_ADDR) - AUX_BOOT_SECTION_SIZE) + + /** Size of the virtual EEPROM.BIN file in bytes. */ + #define EEPROM_FILE_SIZE_BYTES E2END + + /** Number of sectors that comprise a single logical disk cluster. */ + #define SECTOR_PER_CLUSTER 4 + + /** Size of a single logical sector on the disk. */ + #define SECTOR_SIZE_BYTES 512 + + /** Size of a logical cluster on the disk, in bytes */ + #define CLUSTER_SIZE_BYTES (SECTOR_PER_CLUSTER * SECTOR_SIZE_BYTES) + + /** Number of sectors required to store a given size in bytes. + * + * \param[in] size Size of the data that needs to be stored + * + * \return Number of sectors required to store the given data on the disk. + */ + #define FILE_SECTORS(size) ((size / SECTOR_SIZE_BYTES) + ((size % SECTOR_SIZE_BYTES) ? 1 : 0)) + + /** Number of clusters required to store a given size in bytes. + * + * \param[in] size Size of the data that needs to be stored + * + * \return Number of clusters required to store the given data on the disk. + */ + #define FILE_CLUSTERS(size) ((size / CLUSTER_SIZE_BYTES) + ((size % CLUSTER_SIZE_BYTES) ? 1 : 0)) + + /** Total number of logical sectors/blocks on the disk. */ + #define LUN_MEDIA_BLOCKS (FILE_SECTORS(FLASH_FILE_SIZE_BYTES) + FILE_SECTORS(EEPROM_FILE_SIZE_BYTES) + 32) + + /** Converts a given time in HH:MM:SS format to a FAT filesystem time. + * + * \note The minimum seconds resolution of FAT is 2, thus odd seconds + * will be truncated to the previous integer multiple of 2 seconds. + * + * \param[in] hh Hours (0-23) + * \param[in] mm Minutes (0-59) + * \param[in] ss Seconds (0-59) + * + * \return Given time encoded as a FAT filesystem timestamp + */ + #define FAT_TIME(hh, mm, ss) ((hh << 11) | (mm << 5) | (ss >> 1)) + + /** Converts a given date in DD/MM/YYYY format to a FAT filesystem date. + * + * \param[in] dd Days in the month (1-31) + * \param[in] mm Months in the year (1-12) + * \param[in] yyyy Year (1980 - 2107) + * + * \return Given date encoded as a FAT filesystem datestamp + */ + #define FAT_DATE(dd, mm, yyyy) (((yyyy - 1980) << 9) | (mm << 5) | (dd << 0)) + + /** Bit-rotates a given 8-bit value once to the right. + * + * \param[in] x Value to rotate right once + * + * \return Bit-rotated input value, rotated once to the right. + */ + #define ROT8(x) ((((x) & 0xFE) >> 1) | (((x) & 1) ? 0x80 : 0x00)) + + /** Computes the LFN entry checksum of a MSDOS 8.3 format file entry, + * to associate a LFN entry with its short file entry. + * + * \param[in] n0 MSDOS Filename character 1 + * \param[in] n1 MSDOS Filename character 2 + * \param[in] n2 MSDOS Filename character 3 + * \param[in] n3 MSDOS Filename character 4 + * \param[in] n4 MSDOS Filename character 5 + * \param[in] n5 MSDOS Filename character 6 + * \param[in] n6 MSDOS Filename character 7 + * \param[in] n7 MSDOS Filename character 8 + * \param[in] e0 MSDOS Extension character 1 + * \param[in] e1 MSDOS Extension character 2 + * \param[in] e2 MSDOS Extension character 3 + * + * \return LFN checksum of the given MSDOS 8.3 filename. + */ + #define FAT_CHECKSUM(n0, n1, n2, n3, n4, n5, n6, n7, e0, e1, e2) \ + (uint8_t)(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(ROT8(n0)+n1)+n2)+n3)+n4)+n5)+n6)+n7)+e0)+e1)+e2) + + /** \name FAT Filesystem Flags */ + //@{ + /** FAT attribute flag to indicate a read-only file. */ + #define FAT_FLAG_READONLY (1 << 0) + + /** FAT attribute flag to indicate a hidden file. */ + #define FAT_FLAG_HIDDEN (1 << 1) + + /** FAT attribute flag to indicate a system file. */ + #define FAT_FLAG_SYSTEM (1 << 2) + + /** FAT attribute flag to indicate a Volume name entry. */ + #define FAT_FLAG_VOLUME_NAME (1 << 3) + + /** FAT attribute flag to indicate a directory entry. */ + #define FAT_FLAG_DIRECTORY (1 << 4) + + /** FAT attribute flag to indicate a file ready for archiving. */ + #define FAT_FLAG_ARCHIVE (1 << 5) + + /** FAT pseudo-attribute flag to indicate a Long File Name entry. */ + #define FAT_FLAG_LONG_FILE_NAME 0x0F + + /** Ordinal flag marker for FAT Long File Name entries to mark the last entry. */ + #define FAT_ORDINAL_LAST_ENTRY (1 << 6) + //@} + + /* Enums: */ + /** Enum for the Root FAT file entry indexes on the disk. This can be used + * to retrieve the current contents of a known directory entry. + */ + enum + { + /** Volume ID directory entry, giving the name of the virtual disk. */ + DISK_FILE_ENTRY_VolumeID = 0, + /** Long File Name FAT file entry of the virtual FLASH.BIN image file. */ + DISK_FILE_ENTRY_FLASH_LFN = 1, + /** Legacy MSDOS FAT file entry of the virtual FLASH.BIN image file. */ + DISK_FILE_ENTRY_FLASH_MSDOS = 2, + /** Long File Name FAT file entry of the virtual EEPROM.BIN image file. */ + DISK_FILE_ENTRY_EEPROM_LFN = 3, + /** Legacy MSDOS FAT file entry of the virtual EEPROM.BIN image file. */ + DISK_FILE_ENTRY_EEPROM_MSDOS = 4, + }; + + /** Enum for the physical disk blocks of the virtual disk. */ + enum + { + /** Boot sector disk block. */ + DISK_BLOCK_BootBlock = 0, + /** First copy of the FAT table block. */ + DISK_BLOCK_FATBlock1 = 1, + /** Second copy of the FAT table block. */ + DISK_BLOCK_FATBlock2 = 2, + /** Root file and directory entries block. */ + DISK_BLOCK_RootFilesBlock = 3, + /** Start block of the disk data section. */ + DISK_BLOCK_DataStartBlock = 4, + }; + + /* Type Definitions: */ + /** FAT boot block structure definition, used to identify the core + * parameters of a FAT file system stored on a disk. + * + * \note This definition is truncated to save space; the magic signature + * \c 0xAA55 must be appended to the very end of the block for it + * to be detected by the host as a valid boot block. + */ + typedef struct + { + uint8_t Bootstrap[3]; + uint8_t Description[8]; + uint16_t SectorSize; + uint8_t SectorsPerCluster; + uint16_t ReservedSectors; + uint8_t FATCopies; + uint16_t RootDirectoryEntries; + uint16_t TotalSectors16; + uint8_t MediaDescriptor; + uint16_t SectorsPerFAT; + uint16_t SectorsPerTrack; + uint16_t Heads; + uint32_t HiddenSectors; + uint32_t TotalSectors32; + uint16_t PhysicalDriveNum; + uint8_t ExtendedBootRecordSig; + uint32_t VolumeSerialNumber; + uint8_t VolumeLabel[11]; + uint8_t FilesystemIdentifier[8]; + /* uint8_t BootstrapProgram[448]; */ + /* uint16_t MagicSignature; */ + } FATBootBlock_t; + + /** FAT directory entry structure, for the various kinds of File and + * directory descriptors on a FAT disk. + */ + typedef union + { + /** VFAT Long File Name file entry. */ + struct + { + uint8_t Ordinal; + uint16_t Unicode1; + uint16_t Unicode2; + uint16_t Unicode3; + uint16_t Unicode4; + uint16_t Unicode5; + uint8_t Attribute; + uint8_t Reserved1; + uint8_t Checksum; + uint16_t Unicode6; + uint16_t Unicode7; + uint16_t Unicode8; + uint16_t Unicode9; + uint16_t Unicode10; + uint16_t Unicode11; + uint16_t Reserved2; + uint16_t Unicode12; + uint16_t Unicode13; + } VFAT_LongFileName; + + /** Legacy FAT MSDOS 8.3 file entry. */ + struct + { + uint8_t Filename[8]; + uint8_t Extension[3]; + uint8_t Attributes; + uint8_t Reserved[10]; + uint16_t CreationTime; + uint16_t CreationDate; + uint16_t StartingCluster; + uint32_t FileSizeBytes; + } MSDOS_File; + + /** Legacy FAT MSDOS (sub-)directory entry. */ + struct + { + uint8_t Name[11]; + uint8_t Attributes; + uint8_t Reserved[10]; + uint16_t CreationTime; + uint16_t CreationDate; + uint16_t StartingCluster; + uint32_t Reserved2; + } MSDOS_Directory; + } FATDirectoryEntry_t; + + /* Function Prototypes: */ + #if defined(INCLUDE_FROM_VIRTUAL_FAT_C) + static uint8_t ReadEEPROMByte(const uint8_t* const Address) ATTR_NO_INLINE; + + static void WriteEEPROMByte(uint8_t* const Address, + const uint8_t Data) ATTR_NO_INLINE; + + static void UpdateFAT12ClusterEntry(uint8_t* const FATTable, + const uint16_t Index, + const uint16_t ChainEntry) AUX_BOOT_SECTION; + + static void UpdateFAT12ClusterChain(uint8_t* const FATTable, + const uint16_t StartIndex, + const uint8_t ChainLength) AUX_BOOT_SECTION; + + static void ReadWriteFLASHFileBlock(const uint16_t BlockNumber, + uint8_t* BlockBuffer, + const bool Read) AUX_BOOT_SECTION; + + static void ReadWriteEEPROMFileBlock(const uint16_t BlockNumber, + uint8_t* BlockBuffer, + const bool Read) AUX_BOOT_SECTION; + #endif + + void VirtualFAT_WriteBlock(const uint16_t BlockNumber) AUX_BOOT_SECTION; + void VirtualFAT_ReadBlock(const uint16_t BlockNumber) AUX_BOOT_SECTION; + +#endif diff --git a/lib/lufa/Bootloaders/MassStorage/asf.xml b/lib/lufa/Bootloaders/MassStorage/asf.xml new file mode 100644 index 000000000..700ffa26f --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/asf.xml @@ -0,0 +1,156 @@ +<asf xmlversion="1.0"> + <project caption="Mass Storage Bootloader - 128KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.128_8" force-caption="true" workspace-name="lufa_ms_128kb_8kb_"> + <require idref="lufa.bootloaders.mass_storage"/> + <require idref="lufa.boards.dummy.avr8"/> + <generator value="as5_8"/> + + <device-support value="at90usb1287"/> + <config name="lufa.drivers.board.name" value="none"/> + + <config name="config.compiler.optimization.level" value="size"/> + + <build type="define" name="F_CPU" value="16000000UL"/> + <build type="define" name="F_USB" value="16000000UL"/> + + <build type="define" name="BOOT_START_ADDR" value="0x1E000"/> + <build type="linker-config" subtype="flags" value="--section-start=.text=0x1E000"/> + + <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/> + + <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x1FFA0"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> + <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x1FFE0"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> + <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x1FFF8"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> + </project> + + <project caption="Mass Storage Bootloader - 64KB FLASH / 8KB Boot - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.64_8" force-caption="true" workspace-name="lufa_ms_64kb_8kb_"> + <require idref="lufa.bootloaders.mass_storage"/> + <require idref="lufa.boards.dummy.avr8"/> + <generator value="as5_8"/> + + <device-support value="at90usb647"/> + <config name="lufa.drivers.board.name" value="none"/> + + <config name="config.compiler.optimization.level" value="size"/> + + <build type="define" name="F_CPU" value="16000000UL"/> + <build type="define" name="F_USB" value="16000000UL"/> + + <build type="define" name="BOOT_START_ADDR" value="0xE000"/> + <build type="linker-config" subtype="flags" value="--section-start=.text=0xE000"/> + + <build type="define" name="AUX_BOOT_SECTION_SIZE" value="0"/> + + <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0xFFA0"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> + <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0xFFE0"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> + <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0xFFF8"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> + </project> + + <project caption="Mass Storage Bootloader - 32KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.32_4" force-caption="true" workspace-name="lufa_ms_32kb_4kb_"> + <require idref="lufa.bootloaders.mass_storage"/> + <require idref="lufa.boards.dummy.avr8"/> + <generator value="as5_8"/> + + <device-support value="atmega32u4"/> + <config name="lufa.drivers.board.name" value="none"/> + + <config name="config.compiler.optimization.level" value="size"/> + + <build type="define" name="F_CPU" value="16000000UL"/> + <build type="define" name="F_USB" value="16000000UL"/> + + <build type="define" name="BOOT_START_ADDR" value="0x7000"/> + <build type="linker-config" subtype="flags" value="--section-start=.text=0x7000"/> + + <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/> + <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x6810"/> + <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x6800"/> + <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/> + + <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x7FA0"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> + <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x7FE0"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> + <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x7FF8"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> + </project> + + <project caption="Mass Storage Bootloader - 16KB FLASH / 4KB Boot (2KB AUX) - AVR8 Architecture" id="lufa.bootloaders.mass_storage.avr8.16_4" force-caption="true" workspace-name="lufa_ms_16kb_4kb_"> + <require idref="lufa.bootloaders.mass_storage"/> + <require idref="lufa.boards.dummy.avr8"/> + <generator value="as5_8"/> + + <device-support value="atmega16u2"/> + <config name="lufa.drivers.board.name" value="none"/> + + <config name="config.compiler.optimization.level" value="size"/> + + <build type="define" name="F_CPU" value="16000000UL"/> + <build type="define" name="F_USB" value="16000000UL"/> + + <build type="define" name="BOOT_START_ADDR" value="0x3000"/> + <build type="linker-config" subtype="flags" value="--section-start=.text=0x3000"/> + + <build type="define" name="AUX_BOOT_SECTION_SIZE" value="2048"/> + <build type="linker-config" subtype="flags" value="--section-start=.boot_aux=0x2810"/> + <build type="linker-config" subtype="flags" value="--section-start=.boot_aux_trampoline=0x2800"/> + <build type="linker-config" subtype="flags" value="--undefined=Boot_AUX_Trampoline"/> + + <build type="linker-config" subtype="flags" value="--section-start=.apitable_trampolines=0x3FA0"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Trampolines"/> + <build type="linker-config" subtype="flags" value="--section-start=.apitable_jumptable=0x3FE0"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_JumpTable"/> + <build type="linker-config" subtype="flags" value="--section-start=.apitable_signatures=0x3FF8"/> + <build type="linker-config" subtype="flags" value="--undefined=BootloaderAPI_Signatures"/> + </project> + + <module type="application" id="lufa.bootloaders.mass_storage" caption="Mass Storage Bootloader"> + <info type="description" value="summary"> + Mass Storage Class Bootloader, capable of reprogramming a device via binary BIN files copied to the virtual FAT12 file-system it creates when plugged into a host. + </info> + + <info type="gui-flag" value="move-to-root"/> + + <info type="keyword" value="Technology"> + <keyword value="Bootloaders"/> + <keyword value="USB Device"/> + </info> + + <device-support-alias value="lufa_avr8"/> + <device-support-alias value="lufa_xmega"/> + <device-support-alias value="lufa_uc3"/> + + <build type="include-path" value="."/> + <build type="c-source" value="BootloaderMassStorage.c"/> + <build type="header-file" value="BootloaderMassStorage.h"/> + <build type="c-source" value="Descriptors.c"/> + <build type="header-file" value="Descriptors.h"/> + <build type="c-source" value="BootloaderAPI.c"/> + <build type="header-file" value="BootloaderAPI.h"/> + <build type="asm-source" value="BootloaderAPITable.S"/> + + <build type="module-config" subtype="path" value="Config"/> + <build type="header-file" value="Config/LUFAConfig.h"/> + <build type="header-file" value="Config/AppConfig.h"/> + + <build type="include-path" value="Lib"/> + <build type="header-file" value="Lib/VirtualFAT.h"/> + <build type="c-source" value="Lib/VirtualFAT.c"/> + <build type="header-file" value="Lib/SCSI.h"/> + <build type="c-source" value="Lib/SCSI.c"/> + + <build type="distribute" subtype="user-file" value="doxyfile"/> + <build type="distribute" subtype="user-file" value="BootloaderMassStorage.txt"/> + + <require idref="lufa.common"/> + <require idref="lufa.platform"/> + <require idref="lufa.drivers.usb"/> + <require idref="lufa.drivers.board"/> + <require idref="lufa.drivers.board.leds"/> + </module> +</asf> diff --git a/lib/lufa/Bootloaders/MassStorage/doxyfile b/lib/lufa/Bootloaders/MassStorage/doxyfile new file mode 100644 index 000000000..795c6e81a --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/doxyfile @@ -0,0 +1,2396 @@ +# Doxyfile 1.8.9 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project. +# +# All text after a double hash (##) is considered a comment and is placed in +# front of the TAG it is preceding. +# +# All text after a single hash (#) is considered a comment and will be ignored. +# The format is: +# TAG = value [value, ...] +# For lists, items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (\" \"). + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all text +# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv +# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv +# for the list of possible encodings. +# The default value is: UTF-8. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by +# double-quotes, unless you are using Doxywizard) that should identify the +# project for which the documentation is generated. This name is used in the +# title of most generated pages and in a few other places. +# The default value is: My Project. + +PROJECT_NAME = "LUFA Library - Mass Storage Class Bootloader" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. This +# could be handy for archiving the generated documentation or if some version +# control system is used. + +PROJECT_NUMBER = + +# Using the PROJECT_BRIEF tag one can provide an optional one line description +# for a project that appears at the top of each page and should give viewer a +# quick idea about the purpose of the project. Keep the description short. + +PROJECT_BRIEF = + +# With the PROJECT_LOGO tag one can specify a logo or an icon that is included +# in the documentation. The maximum height of the logo should not exceed 55 +# pixels and the maximum width should not exceed 200 pixels. Doxygen will copy +# the logo to the output directory. + +PROJECT_LOGO = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path +# into which the generated documentation will be written. If a relative path is +# entered, it will be relative to the location where doxygen was started. If +# left blank the current directory will be used. + +OUTPUT_DIRECTORY = ./Documentation/ + +# If the CREATE_SUBDIRS tag is set to YES then doxygen will create 4096 sub- +# directories (in 2 levels) under the output directory of each output format and +# will distribute the generated files over these directories. Enabling this +# option can be useful when feeding doxygen a huge amount of source files, where +# putting all generated files in the same directory would otherwise causes +# performance problems for the file system. +# The default value is: NO. + +CREATE_SUBDIRS = NO + +# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII +# characters to appear in the names of generated files. If set to NO, non-ASCII +# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode +# U+3044. +# The default value is: NO. + +ALLOW_UNICODE_NAMES = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese, +# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States), +# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian, +# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages), +# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian, +# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, +# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish, +# Ukrainian and Vietnamese. +# The default value is: English. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member +# descriptions after the members that are listed in the file and class +# documentation (similar to Javadoc). Set to NO to disable this. +# The default value is: YES. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief +# description of a member or function before the detailed description +# +# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. +# The default value is: YES. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator that is +# used to form the text in various listings. Each string in this list, if found +# as the leading text of the brief description, will be stripped from the text +# and the result, after processing the whole list, is used as the annotated +# text. Otherwise, the brief description is used as-is. If left blank, the +# following values are used ($name is automatically replaced with the name of +# the entity):The $name class, The $name widget, The $name file, is, provides, +# specifies, contains, represents, a, an and the. + +ABBREVIATE_BRIEF = "The $name class" \ + "The $name widget" \ + "The $name file" \ + is \ + provides \ + specifies \ + contains \ + represents \ + a \ + an \ + the + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# doxygen will generate a detailed section even if there is only a brief +# description. +# The default value is: NO. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. +# The default value is: NO. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path +# before files name in the file list and in the header files. If set to NO the +# shortest path that makes the file name unique will be used +# The default value is: YES. + +FULL_PATH_NAMES = YES + +# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path. +# Stripping is only done if one of the specified strings matches the left-hand +# part of the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the path to +# strip. +# +# Note that you can specify absolute paths here, but also relative paths, which +# will be relative from the directory where doxygen is started. +# This tag requires that the tag FULL_PATH_NAMES is set to YES. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the +# path mentioned in the documentation of a class, which tells the reader which +# header file to include in order to use a class. If left blank only the name of +# the header file containing the class definition is used. Otherwise one should +# specify the list of include paths that are normally passed to the compiler +# using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but +# less readable) file names. This can be useful is your file systems doesn't +# support long names like on DOS, Mac, or CD-ROM. +# The default value is: NO. + +SHORT_NAMES = YES + +# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the +# first line (until the first dot) of a Javadoc-style comment as the brief +# description. If set to NO, the Javadoc-style will behave just like regular Qt- +# style comments (thus requiring an explicit @brief command for a brief +# description.) +# The default value is: NO. + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first +# line (until the first dot) of a Qt-style comment as the brief description. If +# set to NO, the Qt-style will behave just like regular Qt-style comments (thus +# requiring an explicit \brief command for a brief description.) +# The default value is: NO. + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a +# multi-line C++ special comment block (i.e. a block of //! or /// comments) as +# a brief description. This used to be the default behavior. The new default is +# to treat a multi-line C++ comment block as a detailed description. Set this +# tag to YES if you prefer the old behavior instead. +# +# Note that setting this tag to YES also means that rational rose comments are +# not recognized any more. +# The default value is: NO. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the +# documentation from any documented member that it re-implements. +# The default value is: YES. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new +# page for each member. If set to NO, the documentation of a member will be part +# of the file/class/namespace that contains it. +# The default value is: NO. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen +# uses this value to replace tabs by spaces in code fragments. +# Minimum value: 1, maximum value: 16, default value: 4. + +TAB_SIZE = 4 + +# This tag can be used to specify a number of aliases that act as commands in +# the documentation. An alias has the form: +# name=value +# For example adding +# "sideeffect=@par Side Effects:\n" +# will allow you to put the command \sideeffect (or @sideeffect) in the +# documentation, which will result in a user-defined paragraph with heading +# "Side Effects:". You can put \n's in the value part of an alias to insert +# newlines. + +ALIASES = + +# This tag can be used to specify a number of word-keyword mappings (TCL only). +# A mapping has the form "name=value". For example adding "class=itcl::class" +# will allow you to use the command class in the itcl::class meaning. + +TCL_SUBST = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. For +# instance, some of the names that are used will be different. The list of all +# members will be omitted, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or +# Python sources only. Doxygen will then generate output that is more tailored +# for that language. For instance, namespaces will be presented as packages, +# qualified scopes will look different, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources. Doxygen will then generate output that is tailored for Fortran. +# The default value is: NO. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for VHDL. +# The default value is: NO. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it +# parses. With this tag you can assign which parser to use for a given +# extension. Doxygen has a built-in mapping, but you can override or extend it +# using this tag. The format is ext=language, where ext is a file extension, and +# language is one of the parsers supported by doxygen: IDL, Java, Javascript, +# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: +# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: +# Fortran. In the later case the parser tries to guess whether the code is fixed +# or free formatted code, this is the default for Fortran type files), VHDL. For +# instance to make doxygen treat .inc files as Fortran files (default is PHP), +# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# +# Note: For files without extension you can use no_extension as a placeholder. +# +# Note that for custom extensions you also need to set FILE_PATTERNS otherwise +# the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments +# according to the Markdown format, which allows for more readable +# documentation. See http://daringfireball.net/projects/markdown/ for details. +# The output of markdown processing is further processed by doxygen, so you can +# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in +# case of backward compatibilities issues. +# The default value is: YES. + +MARKDOWN_SUPPORT = NO + +# When enabled doxygen tries to link words that correspond to documented +# classes, or namespaces to their corresponding documentation. Such a link can +# be prevented in individual cases by putting a % sign in front of the word or +# globally by setting AUTOLINK_SUPPORT to NO. +# The default value is: YES. + +AUTOLINK_SUPPORT = YES + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should set this +# tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); +# versus func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. +# The default value is: NO. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. +# The default value is: NO. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip (see: +# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# will parse them like normal C++ but will assume all classes use public instead +# of private inheritance when no explicit protection keyword is present. +# The default value is: NO. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate +# getter and setter methods for a property. Setting this option to YES will make +# doxygen to replace the get and set methods by a property in the documentation. +# This will only work if the methods are indeed getting or setting a simple +# type. If this is not the case, or you want to show the methods anyway, you +# should set this option to NO. +# The default value is: YES. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. +# The default value is: NO. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES to allow class member groups of the same type +# (for instance a group of public functions) to be put as a subgroup of that +# type (e.g. under the Public Functions section). Set it to NO to prevent +# subgrouping. Alternatively, this can be done per class using the +# \nosubgrouping command. +# The default value is: YES. + +SUBGROUPING = YES + +# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions +# are shown inside the group in which they are included (e.g. using \ingroup) +# instead of on a separate page (for HTML and Man pages) or section (for LaTeX +# and RTF). +# +# Note that this feature does not work in combination with +# SEPARATE_MEMBER_PAGES. +# The default value is: NO. + +INLINE_GROUPED_CLASSES = NO + +# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions +# with only public data fields or simple typedef fields will be shown inline in +# the documentation of the scope in which they are defined (i.e. file, +# namespace, or group documentation), provided this scope is documented. If set +# to NO, structs, classes, and unions are shown on a separate page (for HTML and +# Man pages) or section (for LaTeX and RTF). +# The default value is: NO. + +INLINE_SIMPLE_STRUCTS = NO + +# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or +# enum is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically be +# useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. +# The default value is: NO. + +TYPEDEF_HIDES_STRUCT = NO + +# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This +# cache is used to resolve symbols given their name and scope. Since this can be +# an expensive process and often the same symbol appears multiple times in the +# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small +# doxygen will become slower. If the cache is too large, memory is wasted. The +# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range +# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536 +# symbols. At the end of a run doxygen will report the cache usage and suggest +# the optimal cache size from a speed point of view. +# Minimum value: 0, maximum value: 9, default value: 0. + +LOOKUP_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in +# documentation are documented, even if no documentation was available. Private +# class members and static file members will be hidden unless the +# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES. +# Note: This will also disable the warnings about undocumented members that are +# normally produced when WARNINGS is set to YES. +# The default value is: NO. + +EXTRACT_ALL = YES + +# If the EXTRACT_PRIVATE tag is set to YES, all private members of a class will +# be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIVATE = YES + +# If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal +# scope will be included in the documentation. +# The default value is: NO. + +EXTRACT_PACKAGE = NO + +# If the EXTRACT_STATIC tag is set to YES, all static members of a file will be +# included in the documentation. +# The default value is: NO. + +EXTRACT_STATIC = YES + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES, classes (and structs) defined +# locally in source files will be included in the documentation. If set to NO, +# only classes defined in header files are included. Does not have any effect +# for Java sources. +# The default value is: YES. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. If set to YES, local methods, +# which are defined in the implementation section but not in the interface are +# included in the documentation. If set to NO, only methods in the interface are +# included. +# The default value is: NO. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base name of +# the file that contains the anonymous namespace. By default anonymous namespace +# are hidden. +# The default value is: NO. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all +# undocumented members inside documented classes or files. If set to NO these +# members will be included in the various overviews, but no documentation +# section is generated. This option has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. If set +# to NO, these classes will be included in the various overviews. This option +# has no effect if EXTRACT_ALL is enabled. +# The default value is: NO. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend +# (class|struct|union) declarations. If set to NO, these declarations will be +# included in the documentation. +# The default value is: NO. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any +# documentation blocks found inside the body of a function. If set to NO, these +# blocks will be appended to the function's detailed documentation block. +# The default value is: NO. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation that is typed after a +# \internal command is included. If the tag is set to NO then the documentation +# will be excluded. Set it to YES to include the internal documentation. +# The default value is: NO. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file +# names in lower-case letters. If set to YES, upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. +# The default value is: system dependent. + +CASE_SENSE_NAMES = NO + +# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with +# their full class and namespace scopes in the documentation. If set to YES, the +# scope will be hidden. +# The default value is: NO. + +HIDE_SCOPE_NAMES = NO + +# If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will +# append additional text to a page's title, such as Class Reference. If set to +# YES the compound reference will be hidden. +# The default value is: NO. + +HIDE_COMPOUND_REFERENCE= NO + +# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of +# the files that are included by a file in the documentation of that file. +# The default value is: YES. + +SHOW_INCLUDE_FILES = YES + +# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each +# grouped member an include statement to the documentation, telling the reader +# which file to include in order to use the member. +# The default value is: NO. + +SHOW_GROUPED_MEMB_INC = NO + +# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include +# files with double quotes in the documentation rather than with sharp brackets. +# The default value is: NO. + +FORCE_LOCAL_INCLUDES = NO + +# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the +# documentation for inline members. +# The default value is: YES. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the +# (detailed) documentation of file and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. +# The default value is: YES. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief +# descriptions of file, namespace and class members alphabetically by member +# name. If set to NO, the members will appear in declaration order. Note that +# this will also influence the order of the classes in the class list. +# The default value is: NO. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the +# (brief and detailed) documentation of class members so that constructors and +# destructors are listed first. If set to NO the constructors will appear in the +# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS. +# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief +# member documentation. +# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting +# detailed member documentation. +# The default value is: NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy +# of group names into alphabetical order. If set to NO the group names will +# appear in their defined order. +# The default value is: NO. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by +# fully-qualified names, including namespaces. If set to NO, the class list will +# be sorted only by class name, not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the alphabetical +# list. +# The default value is: NO. + +SORT_BY_SCOPE_NAME = NO + +# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper +# type resolution of all parameters of a function it will reject a match between +# the prototype and the implementation of a member function even if there is +# only one candidate or it is obvious which candidate to choose by doing a +# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still +# accept a match between prototype and implementation in such cases. +# The default value is: NO. + +STRICT_PROTO_MATCHING = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or disable (NO) the todo +# list. This list is created by putting \todo commands in the documentation. +# The default value is: YES. + +GENERATE_TODOLIST = NO + +# The GENERATE_TESTLIST tag can be used to enable (YES) or disable (NO) the test +# list. This list is created by putting \test commands in the documentation. +# The default value is: YES. + +GENERATE_TESTLIST = NO + +# The GENERATE_BUGLIST tag can be used to enable (YES) or disable (NO) the bug +# list. This list is created by putting \bug commands in the documentation. +# The default value is: YES. + +GENERATE_BUGLIST = NO + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or disable (NO) +# the deprecated list. This list is created by putting \deprecated commands in +# the documentation. +# The default value is: YES. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional documentation +# sections, marked by \if <section_label> ... \endif and \cond <section_label> +# ... \endcond blocks. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the +# initial value of a variable or macro / define can have for it to appear in the +# documentation. If the initializer consists of more lines than specified here +# it will be hidden. Use a value of 0 to hide initializers completely. The +# appearance of the value of individual variables and macros / defines can be +# controlled using \showinitializer or \hideinitializer command in the +# documentation regardless of this setting. +# Minimum value: 0, maximum value: 10000, default value: 30. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at +# the bottom of the documentation of classes and structs. If set to YES, the +# list will mention the files that were used to generate the documentation. +# The default value is: YES. + +SHOW_USED_FILES = YES + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This +# will remove the Files entry from the Quick Index and from the Folder Tree View +# (if specified). +# The default value is: YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces +# page. This will remove the Namespaces entry from the Quick Index and from the +# Folder Tree View (if specified). +# The default value is: YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command command input-file, where command is the value of the +# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided +# by doxygen. Whatever the program writes to standard output is used as the file +# version. For an example see the documentation. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed +# by doxygen. The layout file controls the global structure of the generated +# output files in an output format independent way. To create the layout file +# that represents doxygen's defaults, run doxygen with the -l option. You can +# optionally specify a file name after the option, if omitted DoxygenLayout.xml +# will be used as the name of the layout file. +# +# Note that if you run doxygen from a directory containing a file called +# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE +# tag is left empty. + +LAYOUT_FILE = + +# The CITE_BIB_FILES tag can be used to specify one or more bib files containing +# the reference definitions. This must be a list of .bib files. The .bib +# extension is automatically appended if omitted. This requires the bibtex tool +# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# For LaTeX the style of the bibliography can be controlled using +# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the +# search path. See also \cite for info how to create references. + +CITE_BIB_FILES = + +#--------------------------------------------------------------------------- +# Configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated to +# standard output by doxygen. If QUIET is set to YES this implies that the +# messages are off. +# The default value is: NO. + +QUIET = YES + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated to standard error (stderr) by doxygen. If WARNINGS is set to YES +# this implies that the warnings are on. +# +# Tip: Turn warnings on while writing the documentation. +# The default value is: YES. + +WARNINGS = YES + +# If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate +# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag +# will automatically be disabled. +# The default value is: YES. + +WARN_IF_UNDOCUMENTED = YES + +# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some parameters +# in a documented function, or documenting parameters that don't exist or using +# markup commands wrongly. +# The default value is: YES. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that +# are documented, but have no documentation for their parameters or return +# value. If set to NO, doxygen will only warn about wrong or incomplete +# parameter documentation, but not about the absence of documentation. +# The default value is: NO. + +WARN_NO_PARAMDOC = YES + +# The WARN_FORMAT tag determines the format of the warning messages that doxygen +# can produce. The string should contain the $file, $line, and $text tags, which +# will be replaced by the file and line number from which the warning originated +# and the warning text. Optionally the format may contain $version, which will +# be replaced by the version of the file (if it could be obtained via +# FILE_VERSION_FILTER) +# The default value is: $file:$line: $text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning and error +# messages should be written. If left blank the output is written to standard +# error (stderr). + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# Configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag is used to specify the files and/or directories that contain +# documented source files. You may enter file names like myfile.cpp or +# directories like /usr/src/myproject. Separate the files or directories with +# spaces. +# Note: If this tag is empty the current directory is searched. + +INPUT = ./ + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses +# libiconv (or the iconv built into libc) for the transcoding. See the libiconv +# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# possible encodings. +# The default value is: UTF-8. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank the +# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, +# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, +# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, +# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, +# *.qsf, *.as and *.js. + +FILE_PATTERNS = *.h \ + *.c \ + *.txt + +# The RECURSIVE tag can be used to specify whether or not subdirectories should +# be searched for input files as well. +# The default value is: NO. + +RECURSIVE = YES + +# The EXCLUDE tag can be used to specify files and/or directories that should be +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. +# +# Note that relative paths are relative to the directory from which doxygen is +# run. + +EXCLUDE = Documentation/ + +# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or +# directories that are symbolic links (a Unix file system feature) are excluded +# from the input. +# The default value is: NO. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test +# +# Note that the wildcards are matched against the file with absolute path, so to +# exclude all test directories use the pattern */test/* + +EXCLUDE_SYMBOLS = __* \ + INCLUDE_FROM_* + +# The EXAMPLE_PATH tag can be used to specify one or more files or directories +# that contain example code fragments that are included (see the \include +# command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and +# *.h) to filter out the source-files in the directories. If left blank all +# files are included. + +EXAMPLE_PATTERNS = * + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude commands +# irrespective of the value of the RECURSIVE tag. +# The default value is: NO. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or directories +# that contain images that are to be included in the documentation (see the +# \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command: +# +# <filter> <input-file> +# +# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the +# name of an input file. Doxygen will then use the output that the filter +# program writes to standard output. If FILTER_PATTERNS is specified, this tag +# will be ignored. +# +# Note that the filter must not add or remove lines; it is applied before the +# code is scanned, but not when the output code is generated. If lines are added +# or removed, the anchors will not be placed correctly. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. The filters are a list of the form: pattern=filter +# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how +# filters are used. If the FILTER_PATTERNS tag is empty or if none of the +# patterns match the file name, INPUT_FILTER is applied. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will also be used to filter the input files that are used for +# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES). +# The default value is: NO. + +FILTER_SOURCE_FILES = NO + +# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file +# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and +# it is also possible to disable source filtering for a specific pattern using +# *.ext= (so without naming a filter). +# This tag requires that the tag FILTER_SOURCE_FILES is set to YES. + +FILTER_SOURCE_PATTERNS = + +# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that +# is part of the input, its contents will be placed on the main page +# (index.html). This can be useful if you have a project on for instance GitHub +# and want to reuse the introduction page also for the doxygen output. + +USE_MDFILE_AS_MAINPAGE = + +#--------------------------------------------------------------------------- +# Configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will be +# generated. Documented entities will be cross-referenced with these sources. +# +# Note: To get rid of all source code in the generated output, make sure that +# also VERBATIM_HEADERS is set to NO. +# The default value is: NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body of functions, +# classes and enums directly into the documentation. +# The default value is: NO. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any +# special comment blocks from generated source code fragments. Normal C, C++ and +# Fortran comments will always remain visible. +# The default value is: YES. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES then for each documented +# function all documented functions referencing it will be listed. +# The default value is: NO. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES then for each documented function +# all documented entities called/used by that function will be listed. +# The default value is: NO. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set +# to YES then the hyperlinks from functions in REFERENCES_RELATION and +# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will +# link to the documentation. +# The default value is: YES. + +REFERENCES_LINK_SOURCE = NO + +# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the +# source code will show a tooltip with additional information such as prototype, +# brief description and links to the definition and documentation. Since this +# will make the HTML file larger and loading of large files a bit slower, you +# can opt to disable this feature. +# The default value is: YES. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +SOURCE_TOOLTIPS = YES + +# If the USE_HTAGS tag is set to YES then the references to source code will +# point to the HTML generated by the htags(1) tool instead of doxygen built-in +# source browser. The htags tool is part of GNU's global source tagging system +# (see http://www.gnu.org/software/global/global.html). You will need version +# 4.8.6 or higher. +# +# To use it do the following: +# - Install the latest version of global +# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Make sure the INPUT points to the root of the source tree +# - Run doxygen as normal +# +# Doxygen will invoke htags (and that will in turn invoke gtags), so these +# tools must be available from the command line (i.e. in the search path). +# +# The result: instead of the source browser generated by doxygen, the links to +# source code will now point to the output of htags. +# The default value is: NO. +# This tag requires that the tag SOURCE_BROWSER is set to YES. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a +# verbatim copy of the header file for each class for which an include is +# specified. Set to NO to disable this. +# See also: Section \class. +# The default value is: YES. + +VERBATIM_HEADERS = NO + +# If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the +# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the +# cost of reduced performance. This can be particularly helpful with template +# rich C++ code for which doxygen's built-in parser lacks the necessary type +# information. +# Note: The availability of this option depends on whether or not doxygen was +# compiled with the --with-libclang option. +# The default value is: NO. + +CLANG_ASSISTED_PARSING = NO + +# If clang assisted parsing is enabled you can provide the compiler with command +# line options that you would normally use when invoking the compiler. Note that +# the include paths will already be set by doxygen for the files and directories +# specified with INPUT and INCLUDE_PATH. +# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES. + +CLANG_OPTIONS = + +#--------------------------------------------------------------------------- +# Configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all +# compounds will be generated. Enable this if the project contains a lot of +# classes, structs, unions or interfaces. +# The default value is: YES. + +ALPHABETICAL_INDEX = YES + +# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in +# which the alphabetical index list will be split. +# Minimum value: 1, maximum value: 20, default value: 5. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all classes will +# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag +# can be used to specify a prefix (or a list of prefixes) that should be ignored +# while generating the index headers. +# This tag requires that the tag ALPHABETICAL_INDEX is set to YES. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output +# The default value is: YES. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each +# generated HTML page (for example: .htm, .php, .asp). +# The default value is: .html. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a user-defined HTML header file for +# each generated HTML page. If the tag is left blank doxygen will generate a +# standard header. +# +# To get valid HTML the header file that includes any scripts and style sheets +# that doxygen needs, which is dependent on the configuration options used (e.g. +# the setting GENERATE_TREEVIEW). It is highly recommended to start with a +# default header using +# doxygen -w html new_header.html new_footer.html new_stylesheet.css +# YourConfigFile +# and then modify the file new_header.html. See also section "Doxygen usage" +# for information on how to generate the default header that doxygen normally +# uses. +# Note: The header is subject to change so you typically have to regenerate the +# default header when upgrading to a newer version of doxygen. For a description +# of the possible markers and block names see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each +# generated HTML page. If the tag is left blank doxygen will generate a standard +# footer. See HTML_HEADER for more information on how to generate a default +# footer and what special commands can be used inside the footer. See also +# section "Doxygen usage" for information on how to generate the default footer +# that doxygen normally uses. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style +# sheet that is used by each HTML page. It can be used to fine-tune the look of +# the HTML output. If left blank doxygen will generate a default style sheet. +# See also section "Doxygen usage" for information on how to generate the style +# sheet that doxygen normally uses. +# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as +# it is more robust and this tag (HTML_STYLESHEET) will in the future become +# obsolete. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_STYLESHEET = + +# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# cascading style sheets that are included after the standard style sheets +# created by doxygen. Using this option one can overrule certain style aspects. +# This is preferred over using HTML_STYLESHEET since it does not replace the +# standard style sheet and is therefore more robust against future updates. +# Doxygen will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). For an example see the documentation. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_STYLESHEET = + +# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the HTML output directory. Note +# that these files will be copied to the base HTML output directory. Use the +# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these +# files. In the HTML_STYLESHEET file, use the file name only. Also note that the +# files will be copied as-is; there are no commands or markers available. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_EXTRA_FILES = + +# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen +# will adjust the colors in the style sheet and background images according to +# this color. Hue is specified as an angle on a colorwheel, see +# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 +# purple, and 360 is red again. +# Minimum value: 0, maximum value: 359, default value: 220. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_HUE = 220 + +# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors +# in the HTML output. For a value of 0 the output will use grayscales only. A +# value of 255 will produce the most vivid colors. +# Minimum value: 0, maximum value: 255, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_SAT = 100 + +# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the +# luminance component of the colors in the HTML output. Values below 100 +# gradually make the output lighter, whereas values above 100 make the output +# darker. The value divided by 100 is the actual gamma applied, so 80 represents +# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not +# change the gamma. +# Minimum value: 40, maximum value: 240, default value: 80. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_COLORSTYLE_GAMMA = 80 + +# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_TIMESTAMP = NO + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_SECTIONS = YES + +# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries +# shown in the various tree structured indices initially; the user can expand +# and collapse entries dynamically later on. Doxygen will expand the tree to +# such a level that at most the specified number of entries are visible (unless +# a fully collapsed tree already exceeds this amount). So setting the number of +# entries 1 will produce a full collapsed tree by default. 0 is a special value +# representing an infinite number of entries and will result in a full expanded +# tree by default. +# Minimum value: 0, maximum value: 9999, default value: 100. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_INDEX_NUM_ENTRIES = 100 + +# If the GENERATE_DOCSET tag is set to YES, additional index files will be +# generated that can be used as input for Apple's Xcode 3 integrated development +# environment (see: http://developer.apple.com/tools/xcode/), introduced with +# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# Makefile in the HTML output directory. Running make will produce the docset in +# that directory and running make install will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at +# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html +# for more information. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_DOCSET = NO + +# This tag determines the name of the docset feed. A documentation feed provides +# an umbrella under which multiple documentation sets from a single provider +# (such as a company or product suite) can be grouped. +# The default value is: Doxygen generated docs. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# This tag specifies a string that should uniquely identify the documentation +# set bundle. This should be a reverse domain-name style string, e.g. +# com.mycompany.MyDocSet. Doxygen will append .docset to the name. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify +# the documentation publisher. This should be a reverse domain-name style +# string, e.g. com.mycompany.MyDocSet.documentation. +# The default value is: org.doxygen.Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_ID = org.doxygen.Publisher + +# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher. +# The default value is: Publisher. +# This tag requires that the tag GENERATE_DOCSET is set to YES. + +DOCSET_PUBLISHER_NAME = Publisher + +# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three +# additional HTML index files: index.hhp, index.hhc, and index.hhk. The +# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop +# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# Windows. +# +# The HTML Help Workshop contains a compiler that can convert all HTML output +# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML +# files are now used as the Windows 98 help format, and will replace the old +# Windows help format (.hlp) on all Windows platforms in the future. Compressed +# HTML files also contain an index, a table of contents, and you can search for +# words in the documentation. The HTML workshop also contains a viewer for +# compressed HTML files. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_HTMLHELP = NO + +# The CHM_FILE tag can be used to specify the file name of the resulting .chm +# file. You can add a path in front of the file if the result should not be +# written to the html output directory. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_FILE = + +# The HHC_LOCATION tag can be used to specify the location (absolute path +# including file name) of the HTML help compiler (hhc.exe). If non-empty, +# doxygen will try to run the HTML help compiler on the generated index.hhp. +# The file has to be specified with full path. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +HHC_LOCATION = + +# The GENERATE_CHI flag controls if a separate .chi index file is generated +# (YES) or that it should be included in the master .chm file (NO). +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +GENERATE_CHI = NO + +# The CHM_INDEX_ENCODING is used to encode HtmlHelp index (hhk), content (hhc) +# and project file content. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +CHM_INDEX_ENCODING = + +# The BINARY_TOC flag controls whether a binary table of contents is generated +# (YES) or a normal table of contents (NO) in the .chm file. Furthermore it +# enables the Previous and Next buttons. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members to +# the table of contents of the HTML help documentation and to the tree view. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTMLHELP is set to YES. + +TOC_EXPAND = YES + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and +# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that +# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help +# (.qch) of the generated HTML documentation. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify +# the file name of the resulting .qch file. The path specified is relative to +# the HTML output folder. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help +# Project output. For more information please see Qt Help Project / Namespace +# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_NAMESPACE = org.doxygen.Project + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt +# Help Project output. For more information please see Qt Help Project / Virtual +# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# folders). +# The default value is: doc. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_VIRTUAL_FOLDER = doc + +# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom +# filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the +# custom filter to add. For more information please see Qt Help Project / Custom +# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# filters). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this +# project's filter section matches. Qt Help Project / Filter Attributes (see: +# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHP_SECT_FILTER_ATTRS = + +# The QHG_LOCATION tag can be used to specify the location of Qt's +# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the +# generated .qhp file. +# This tag requires that the tag GENERATE_QHP is set to YES. + +QHG_LOCATION = + +# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be +# generated, together with the HTML files, they form an Eclipse help plugin. To +# install this plugin and make it available under the help contents menu in +# Eclipse, the contents of the directory containing the HTML and XML files needs +# to be copied into the plugins directory of eclipse. The name of the directory +# within the plugins directory should be the same as the ECLIPSE_DOC_ID value. +# After copying Eclipse needs to be restarted before the help appears. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_ECLIPSEHELP = NO + +# A unique identifier for the Eclipse help plugin. When installing the plugin +# the directory name containing the HTML and XML files should also have this +# name. Each documentation set should have its own identifier. +# The default value is: org.doxygen.Project. +# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES. + +ECLIPSE_DOC_ID = org.doxygen.Project + +# If you want full control over the layout of the generated HTML pages it might +# be necessary to disable the index and replace it with your own. The +# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top +# of each HTML page. A value of NO enables the index and the value YES disables +# it. Since the tabs in the index contain the same information as the navigation +# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +DISABLE_INDEX = YES + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. If the tag +# value is set to YES, a side panel will be generated containing a tree-like +# index structure (just like the one that is generated for HTML Help). For this +# to work a browser that supports JavaScript, DHTML, CSS and frames is required +# (i.e. any modern browser). Windows users are probably better off using the +# HTML help feature. Via custom style sheets (see HTML_EXTRA_STYLESHEET) one can +# further fine-tune the look of the index. As an example, the default style +# sheet generated by doxygen has an example that shows how to put an image at +# the root of the tree instead of the PROJECT_NAME. Since the tree basically has +# the same information as the tab index, you could consider setting +# DISABLE_INDEX to YES when enabling this option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +GENERATE_TREEVIEW = YES + +# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that +# doxygen will group on one line in the generated HTML documentation. +# +# Note that a value of 0 will completely suppress the enum values from appearing +# in the overview section. +# Minimum value: 0, maximum value: 20, default value: 4. +# This tag requires that the tag GENERATE_HTML is set to YES. + +ENUM_VALUES_PER_LINE = 1 + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used +# to set the initial width (in pixels) of the frame in which the tree is shown. +# Minimum value: 0, maximum value: 1500, default value: 250. +# This tag requires that the tag GENERATE_HTML is set to YES. + +TREEVIEW_WIDTH = 250 + +# If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to +# external symbols imported via tag files in a separate window. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +EXT_LINKS_IN_WINDOW = NO + +# Use this tag to change the font size of LaTeX formulas included as images in +# the HTML documentation. When you change the font size after a successful +# doxygen run you need to manually remove any form_*.png images from the HTML +# output directory to force them to be regenerated. +# Minimum value: 8, maximum value: 50, default value: 10. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_FONTSIZE = 10 + +# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# generated for formulas are transparent PNGs. Transparent PNGs are not +# supported properly for IE 6.0, but are supported on all modern browsers. +# +# Note that when changing this option you need to delete any form_*.png files in +# the HTML output directory before the changes have effect. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +FORMULA_TRANSPARENT = YES + +# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see +# http://www.mathjax.org) which uses client side Javascript for the rendering +# instead of using pre-rendered bitmaps. Use this if you do not have LaTeX +# installed or if you want to formulas look prettier in the HTML output. When +# enabled you may also need to install MathJax separately and configure the path +# to it using the MATHJAX_RELPATH option. +# The default value is: NO. +# This tag requires that the tag GENERATE_HTML is set to YES. + +USE_MATHJAX = NO + +# When MathJax is enabled you can set the default output format to be used for +# the MathJax output. See the MathJax site (see: +# http://docs.mathjax.org/en/latest/output.html) for more details. +# Possible values are: HTML-CSS (which is slower, but has the best +# compatibility), NativeMML (i.e. MathML) and SVG. +# The default value is: HTML-CSS. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_FORMAT = HTML-CSS + +# When MathJax is enabled you need to specify the location relative to the HTML +# output directory using the MATHJAX_RELPATH option. The destination directory +# should contain the MathJax.js script. For instance, if the mathjax directory +# is located at the same level as the HTML output directory, then +# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax +# Content Delivery Network so you can quickly see the result without installing +# MathJax. However, it is strongly recommended to install a local copy of +# MathJax from http://www.mathjax.org before deployment. +# The default value is: http://cdn.mathjax.org/mathjax/latest. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest + +# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax +# extension names that should be enabled during MathJax rendering. For example +# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_EXTENSIONS = + +# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces +# of code that will be used on startup of the MathJax code. See the MathJax site +# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an +# example see the documentation. +# This tag requires that the tag USE_MATHJAX is set to YES. + +MATHJAX_CODEFILE = + +# When the SEARCHENGINE tag is enabled doxygen will generate a search box for +# the HTML output. The underlying search engine uses javascript and DHTML and +# should work on any modern browser. Note that when using HTML help +# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET) +# there is already a search function so this one should typically be disabled. +# For large projects the javascript based search engine can be slow, then +# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to +# search using the keyboard; to jump to the search box use <access key> + S +# (what the <access key> is depends on the OS and browser, but it is typically +# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down +# key> to jump into the search results window, the results can be navigated +# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel +# the search. The filter options can be selected when the cursor is inside the +# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys> +# to select a filter and <Enter> or <escape> to activate or cancel the filter +# option. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +SEARCHENGINE = NO + +# When the SERVER_BASED_SEARCH tag is enabled the search engine will be +# implemented using a web server instead of a web client using Javascript. There +# are two flavors of web server based searching depending on the EXTERNAL_SEARCH +# setting. When disabled, doxygen will generate a PHP script for searching and +# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing +# and searching needs to be provided by external tools. See the section +# "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SERVER_BASED_SEARCH = NO + +# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP +# script for searching. Instead the search results are written to an XML file +# which needs to be processed by an external indexer. Doxygen will invoke an +# external search engine pointed to by the SEARCHENGINE_URL option to obtain the +# search results. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). +# +# See the section "External Indexing and Searching" for details. +# The default value is: NO. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH = NO + +# The SEARCHENGINE_URL should point to a search engine hosted by a web server +# which will return the search results when EXTERNAL_SEARCH is enabled. +# +# Doxygen ships with an example indexer (doxyindexer) and search engine +# (doxysearch.cgi) which are based on the open source search engine library +# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Searching" for details. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHENGINE_URL = + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed +# search data is written to a file for indexing by an external tool. With the +# SEARCHDATA_FILE tag the name of this file can be specified. +# The default file is: searchdata.xml. +# This tag requires that the tag SEARCHENGINE is set to YES. + +SEARCHDATA_FILE = searchdata.xml + +# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the +# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is +# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple +# projects and redirect the results back to the right project. +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTERNAL_SEARCH_ID = + +# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen +# projects other than the one defined by this configuration file, but that are +# all added to the same external search index. Each project needs to have a +# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of +# to a relative location where the documentation can be found. The format is: +# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ... +# This tag requires that the tag SEARCHENGINE is set to YES. + +EXTRA_SEARCH_MAPPINGS = + +#--------------------------------------------------------------------------- +# Configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output. +# The default value is: YES. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. +# +# Note that when enabling USE_PDFLATEX this option is only used for generating +# bitmaps for formulas in the HTML output, but not in the Makefile that is +# written to the output directory. +# The default file is: latex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate +# index for LaTeX. +# The default file is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used by the +# printer. +# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x +# 14 inches) and executive (7.25 x 10.5 inches). +# The default value is: a4. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names +# that should be included in the LaTeX output. To get the times font for +# instance you can specify +# EXTRA_PACKAGES=times +# If left blank no extra packages will be included. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the +# generated LaTeX document. The header should contain everything until the first +# chapter. If it is left blank doxygen will generate a standard header. See +# section "Doxygen usage" for information on how to let doxygen write the +# default header to a separate file. +# +# Note: Only use a user-defined header if you know what you are doing! The +# following commands have a special meaning inside the header: $title, +# $datetime, $date, $doxygenversion, $projectname, $projectnumber, +# $projectbrief, $projectlogo. Doxygen will replace $title with the empty +# string, for the replacement values of the other commands the user is referred +# to HTML_HEADER. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HEADER = + +# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the +# generated LaTeX document. The footer should contain everything after the last +# chapter. If it is left blank doxygen will generate a standard footer. See +# LATEX_HEADER for more information on how to generate a default footer and what +# special commands can be used inside the footer. +# +# Note: Only use a user-defined footer if you know what you are doing! +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_FOOTER = + +# The LATEX_EXTRA_STYLESHEET tag can be used to specify additional user-defined +# LaTeX style sheets that are included after the standard style sheets created +# by doxygen. Using this option one can overrule certain style aspects. Doxygen +# will copy the style sheet files to the output directory. +# Note: The order of the extra style sheet files is of importance (e.g. the last +# style sheet in the list overrules the setting of the previous ones in the +# list). +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_STYLESHEET = + +# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or +# other source files which should be copied to the LATEX_OUTPUT output +# directory. Note that the files will be copied as-is; there are no commands or +# markers available. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EXTRA_FILES = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is +# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will +# contain links (just like the HTML output) instead of page references. This +# makes the output suitable for online browsing using a PDF viewer. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate +# the PDF file directly from the LaTeX files. Set this option to YES, to get a +# higher quality PDF documentation. +# The default value is: YES. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode +# command to the generated LaTeX files. This will instruct LaTeX to keep running +# if errors occur, instead of asking the user for help. This option is also used +# when generating formulas in HTML. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BATCHMODE = NO + +# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the +# index chapters (such as File Index, Compound Index, etc.) in the output. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_HIDE_INDICES = NO + +# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source +# code with syntax highlighting in the LaTeX output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_SOURCE_CODE = NO + +# The LATEX_BIB_STYLE tag can be used to specify the style to use for the +# bibliography, e.g. plainnat, or ieeetr. See +# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# The default value is: plain. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_BIB_STYLE = plain + +#--------------------------------------------------------------------------- +# Configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The +# RTF output is optimized for Word 97 and may not look too pretty with other RTF +# readers/editors. +# The default value is: NO. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: rtf. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF +# documents. This may be useful for small projects and may help to save some +# trees in general. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will +# contain hyperlink fields. The RTF file will contain links (just like the HTML +# output) instead of page references. This makes the output suitable for online +# browsing using Word or some other Word compatible readers that support those +# fields. +# +# Note: WordPad (write) and others do not support links. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's config +# file, i.e. a series of assignments. You only have to provide replacements, +# missing definitions are set to their default value. +# +# See also section "Doxygen usage" for information on how to generate the +# default style sheet that doxygen normally uses. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an RTF document. Syntax is +# similar to doxygen's config file. A template extensions file can be generated +# using doxygen -e rtf extensionFile. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_EXTENSIONS_FILE = + +# If the RTF_SOURCE_CODE tag is set to YES then doxygen will include source code +# with syntax highlighting in the RTF output. +# +# Note that which sources are shown also depends on other settings such as +# SOURCE_BROWSER. +# The default value is: NO. +# This tag requires that the tag GENERATE_RTF is set to YES. + +RTF_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for +# classes and files. +# The default value is: NO. + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. A directory man3 will be created inside the directory specified by +# MAN_OUTPUT. +# The default directory is: man. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to the generated +# man pages. In case the manual section does not start with a number, the number +# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is +# optional. +# The default value is: .3. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_EXTENSION = .3 + +# The MAN_SUBDIR tag determines the name of the directory created within +# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by +# MAN_EXTENSION with the initial . removed. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_SUBDIR = + +# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it +# will generate one additional man file for each entity documented in the real +# man page(s). These additional files only source the real man page, but without +# them the man command would be unable to find the correct page. +# The default value is: NO. +# This tag requires that the tag GENERATE_MAN is set to YES. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that +# captures the structure of the code including all documentation. +# The default value is: NO. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a +# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of +# it. +# The default directory is: xml. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_OUTPUT = xml + +# If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program +# listings (including syntax highlighting and cross-referencing information) to +# the XML output. Note that enabling this will significantly increase the size +# of the XML output. +# The default value is: YES. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# Configuration options related to the DOCBOOK output +#--------------------------------------------------------------------------- + +# If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files +# that can be used to generate PDF. +# The default value is: NO. + +GENERATE_DOCBOOK = NO + +# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in +# front of it. +# The default directory is: docbook. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_OUTPUT = docbook + +# If the DOCBOOK_PROGRAMLISTING tag is set to YES, doxygen will include the +# program listings (including syntax highlighting and cross-referencing +# information) to the DOCBOOK output. Note that enabling this will significantly +# increase the size of the DOCBOOK output. +# The default value is: NO. +# This tag requires that the tag GENERATE_DOCBOOK is set to YES. + +DOCBOOK_PROGRAMLISTING = NO + +#--------------------------------------------------------------------------- +# Configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an +# AutoGen Definitions (see http://autogen.sf.net) file that captures the +# structure of the code including all documentation. Note that this feature is +# still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# Configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module +# file that captures the structure of the code including all documentation. +# +# Note that this feature is still experimental and incomplete at the moment. +# The default value is: NO. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary +# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI +# output from the Perl module output. +# The default value is: NO. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES, the Perl module output will be nicely +# formatted so it can be parsed by a human reader. This is useful if you want to +# understand what is going on. On the other hand, if this tag is set to NO, the +# size of the Perl module output will be much smaller and Perl will parse it +# just the same. +# The default value is: YES. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file are +# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful +# so different doxyrules.make files included by the same Makefile don't +# overwrite each other's variables. +# This tag requires that the tag GENERATE_PERLMOD is set to YES. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all +# C-preprocessor directives found in the sources and include files. +# The default value is: YES. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names +# in the source code. If set to NO, only conditional compilation will be +# performed. Macro expansion can be done in a controlled way by setting +# EXPAND_ONLY_PREDEF to YES. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +MACRO_EXPANSION = YES + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then +# the macro expansion is limited to the macros specified with the PREDEFINED and +# EXPAND_AS_DEFINED tags. +# The default value is: NO. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_ONLY_PREDEF = YES + +# If the SEARCH_INCLUDES tag is set to YES, the include files in the +# INCLUDE_PATH will be searched if a #include is found. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by the +# preprocessor. +# This tag requires that the tag SEARCH_INCLUDES is set to YES. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will be +# used. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that are +# defined before the preprocessor is started (similar to the -D option of e.g. +# gcc). The argument of the tag is a list of macros of the form: name or +# name=definition (no spaces). If the definition and the "=" are omitted, "=1" +# is assumed. To prevent a macro definition from being undefined via #undef or +# recursively expanded use the := operator instead of the = operator. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +PREDEFINED = __DOXYGEN__ \ + PROGMEM \ + ATTR_NO_INIT + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this +# tag can be used to specify a list of macro names that should be expanded. The +# macro definition that is found in the sources will be used. Use the PREDEFINED +# tag if you want to use a different macro definition that overrules the +# definition found in the source code. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will +# remove all references to function-like macros that are alone on a line, have +# an all uppercase name, and do not end with a semicolon. Such function macros +# are typically used for boiler-plate code, and will confuse the parser if not +# removed. +# The default value is: YES. +# This tag requires that the tag ENABLE_PREPROCESSING is set to YES. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration options related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES tag can be used to specify one or more tag files. For each tag +# file the location of the external documentation should be added. The format of +# a tag file without this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where loc1 and loc2 can be relative or absolute paths or URLs. See the +# section "Linking to external documentation" for more information about the use +# of tag files. +# Note: Each tag file must have a unique name (where the name does NOT include +# the path). If a tag file is not located in the directory in which doxygen is +# run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create a +# tag file that is based on the input files it reads. See section "Linking to +# external documentation" for more information about the usage of tag files. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES, all external class will be listed in +# the class index. If set to NO, only the inherited external classes will be +# listed. +# The default value is: NO. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES, all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will be +# listed. +# The default value is: YES. + +EXTERNAL_GROUPS = YES + +# If the EXTERNAL_PAGES tag is set to YES, all external pages will be listed in +# the related pages index. If set to NO, only the current project's pages will +# be listed. +# The default value is: YES. + +EXTERNAL_PAGES = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of 'which perl'). +# The default file (with absolute path) is: /usr/bin/perl. + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES, doxygen will generate a class diagram +# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to +# NO turns the diagrams off. Note that this option also works with HAVE_DOT +# disabled, but it is recommended to install and use dot, since it yields more +# powerful graphs. +# The default value is: YES. + +CLASS_DIAGRAMS = NO + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see: +# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# You can include diagrams made with dia in doxygen documentation. Doxygen will +# then run dia to produce the diagram and insert it in the documentation. The +# DIA_PATH tag allows you to specify the directory where the dia binary resides. +# If left empty dia is assumed to be found in the default search path. + +DIA_PATH = + +# If set to YES the inheritance and collaboration graphs will hide inheritance +# and usage relations if the target is undocumented or is not a class. +# The default value is: YES. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz (see: +# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent +# Bell Labs. The other options in this section have no effect if this option is +# set to NO +# The default value is: NO. + +HAVE_DOT = NO + +# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed +# to run in parallel. When set to 0 doxygen will base this on the number of +# processors available in the system. You can set it explicitly to a value +# larger than 0 to get control over the balance between CPU load and processing +# speed. +# Minimum value: 0, maximum value: 32, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_NUM_THREADS = 0 + +# When you want a differently looking font in the dot files that doxygen +# generates you can specify the font name using DOT_FONTNAME. You need to make +# sure dot is able to find the font, which can be done by putting it in a +# standard location or by setting the DOTFONTPATH environment variable or by +# setting DOT_FONTPATH to the directory containing the font. +# The default value is: Helvetica. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTNAME = + +# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of +# dot graphs. +# Minimum value: 4, maximum value: 24, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the default font as specified with +# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set +# the path where dot can find it using this tag. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_FONTPATH = + +# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for +# each documented class showing the direct and indirect inheritance relations. +# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +CLASS_GRAPH = NO + +# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a +# graph for each documented class showing the direct and indirect implementation +# dependencies (inheritance, containment, and class references variables) of the +# class with other documented classes. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +COLLABORATION_GRAPH = NO + +# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for +# groups, showing the direct groups dependencies. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GROUP_GRAPHS = NO + +# If the UML_LOOK tag is set to YES, doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LOOK = NO + +# If the UML_LOOK tag is enabled, the fields and methods are shown inside the +# class node. If there are many fields or methods and many nodes the graph may +# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the +# number of items for each type to make the size more manageable. Set this to 0 +# for no limit. Note that the threshold may be exceeded by 50% before the limit +# is enforced. So when you set the threshold to 10, up to 15 fields may appear, +# but if the number exceeds 15, the total amount of fields shown is limited to +# 10. +# Minimum value: 0, maximum value: 100, default value: 10. +# This tag requires that the tag HAVE_DOT is set to YES. + +UML_LIMIT_NUM_FIELDS = 10 + +# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and +# collaboration graphs will show the relations between templates and their +# instances. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +TEMPLATE_RELATIONS = NO + +# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to +# YES then doxygen will generate a graph for each documented file showing the +# direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDE_GRAPH = NO + +# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are +# set to YES then doxygen will generate a graph for each documented file showing +# the direct and indirect include dependencies of the file with other documented +# files. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +INCLUDED_BY_GRAPH = NO + +# If the CALL_GRAPH tag is set to YES then doxygen will generate a call +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller +# dependency graph for every global function or class method. +# +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable caller graphs for selected +# functions only using the \callergraph command. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical +# hierarchy of all classes instead of a textual one. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GRAPHICAL_HIERARCHY = NO + +# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the +# dependencies a directory has on other directories in a graphical way. The +# dependency relations are determined by the #include relations between the +# files in the directories. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DIRECTORY_GRAPH = NO + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. +# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order +# to make the SVG files visible in IE 9+ (other browsers do not have this +# requirement). +# Possible values are: png, jpg, gif and svg. +# The default value is: png. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_IMAGE_FORMAT = png + +# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to +# enable generation of interactive SVG images that allow zooming and panning. +# +# Note that this requires a modern browser other than Internet Explorer. Tested +# and working are Firefox, Chrome, Safari, and Opera. +# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make +# the SVG files visible. Older versions of IE do not have SVG support. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +INTERACTIVE_SVG = NO + +# The DOT_PATH tag can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the \dotfile +# command). +# This tag requires that the tag HAVE_DOT is set to YES. + +DOTFILE_DIRS = + +# The MSCFILE_DIRS tag can be used to specify one or more directories that +# contain msc files that are included in the documentation (see the \mscfile +# command). + +MSCFILE_DIRS = + +# The DIAFILE_DIRS tag can be used to specify one or more directories that +# contain dia files that are included in the documentation (see the \diafile +# command). + +DIAFILE_DIRS = + +# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the +# path where java can find the plantuml.jar file. If left blank, it is assumed +# PlantUML is not used or called during a preprocessing step. Doxygen will +# generate a warning when it encounters a \startuml command in this case and +# will not generate output for the diagram. + +PLANTUML_JAR_PATH = + +# When using plantuml, the specified paths are searched for files specified by +# the !include statement in a plantuml block. + +PLANTUML_INCLUDE_PATH = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes +# that will be shown in the graph. If the number of nodes in a graph becomes +# larger than this value, doxygen will truncate the graph, which is visualized +# by representing a node as a red box. Note that doxygen if the number of direct +# children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that +# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. +# Minimum value: 0, maximum value: 10000, default value: 50. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_GRAPH_MAX_NODES = 15 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs +# generated by dot. A depth value of 3 means that only nodes reachable from the +# root by following a path via at most 3 edges will be shown. Nodes that lay +# further from the root node will be omitted. Note that setting this option to 1 +# or 2 may greatly reduce the computation time needed for large code bases. Also +# note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. +# Minimum value: 0, maximum value: 1000, default value: 0. +# This tag requires that the tag HAVE_DOT is set to YES. + +MAX_DOT_GRAPH_DEPTH = 2 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not seem +# to support this out of the box. +# +# Warning: Depending on the platform used, enabling this option may lead to +# badly anti-aliased labels on the edges of a graph (i.e. they become hard to +# read). +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_TRANSPARENT = YES + +# Set the DOT_MULTI_TARGETS tag to YES to allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) support +# this, this feature is disabled by default. +# The default value is: NO. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_MULTI_TARGETS = NO + +# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page +# explaining the meaning of the various boxes and arrows in the dot generated +# graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate dot +# files that are used to generate the various graphs. +# The default value is: YES. +# This tag requires that the tag HAVE_DOT is set to YES. + +DOT_CLEANUP = YES diff --git a/lib/lufa/Bootloaders/MassStorage/makefile b/lib/lufa/Bootloaders/MassStorage/makefile new file mode 100644 index 000000000..f3948e754 --- /dev/null +++ b/lib/lufa/Bootloaders/MassStorage/makefile @@ -0,0 +1,75 @@ +# +# LUFA Library +# Copyright (C) Dean Camera, 2017. +# +# dean [at] fourwalledcubicle [dot] com +# www.lufa-lib.org +# +# -------------------------------------- +# LUFA Project Makefile. +# -------------------------------------- + +# Run "make help" for target help. + +MCU = at90usb1287 +ARCH = AVR8 +BOARD = USBKEY +F_CPU = 8000000 +F_USB = $(F_CPU) +OPTIMIZATION = s +TARGET = BootloaderMassStorage +SRC = $(TARGET).c Descriptors.c BootloaderAPI.c BootloaderAPITable.S Lib/SCSI.c Lib/VirtualFAT.c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) +LUFA_PATH = ../../LUFA +CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig/ -DBOOT_START_ADDR=$(BOOT_START_OFFSET) +LD_FLAGS = -Wl,--section-start=.text=$(BOOT_START_OFFSET) $(BOOT_API_LD_FLAGS) + +# Flash size and bootloader section sizes of the target, in KB. These must +# match the target's total FLASH size and the bootloader size set in the +# device's fuses. +FLASH_SIZE_KB = 128 +BOOT_SECTION_SIZE_KB = 8 + +# Bootloader address calculation formulas +# Do not modify these macros, but rather modify the dependent values above. +CALC_ADDRESS_IN_HEX = $(shell printf "0x%X" $$(( $(1) )) ) +BOOT_START_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 ) +BOOT_SEC_OFFSET = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) ) + +# Bootloader linker section flags for relocating the API table sections to +# known FLASH addresses - these should not normally be user-edited. +BOOT_SECTION_LD_FLAG = -Wl,--section-start=$(strip $(1))=$(call BOOT_SEC_OFFSET, $(3)) -Wl,--undefined=$(strip $(2)) +BOOT_API_LD_FLAGS = $(call BOOT_SECTION_LD_FLAG, .apitable_trampolines, BootloaderAPI_Trampolines, 96) +BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_jumptable, BootloaderAPI_JumpTable, 32) +BOOT_API_LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .apitable_signatures, BootloaderAPI_Signatures, 8) + +# Check if the bootloader needs an AUX section, located before the real bootloader section to store some of the +# bootloader code. This is required for 32KB and smaller devices, where the actual bootloader is 6KB but the maximum +# bootloader section size is 4KB. The actual usable application space will be reduced by 6KB for these devices. +ifeq ($(BOOT_SECTION_SIZE_KB),8) + CC_FLAGS += -DAUX_BOOT_SECTION_SIZE=0 +else + AUX_BOOT_SECTION_SIZE_KB = (6 - $(BOOT_SECTION_SIZE_KB)) + + CC_FLAGS += -DAUX_BOOT_SECTION_SIZE='($(AUX_BOOT_SECTION_SIZE_KB) * 1024)' + LD_FLAGS += -Wl,--section-start=.boot_aux=$(call BOOT_SEC_OFFSET, (($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024 - 16)) + LD_FLAGS += $(call BOOT_SECTION_LD_FLAG, .boot_aux_trampoline, Boot_AUX_Trampoline, ($(BOOT_SECTION_SIZE_KB) + $(AUX_BOOT_SECTION_SIZE_KB)) * 1024) +endif + +# Default target +all: + +# Include LUFA-specific DMBS extension modules +DMBS_LUFA_PATH ?= $(LUFA_PATH)/Build/LUFA +include $(DMBS_LUFA_PATH)/lufa-sources.mk +include $(DMBS_LUFA_PATH)/lufa-gcc.mk + +# Include common DMBS build system modules +DMBS_PATH ?= $(LUFA_PATH)/Build/DMBS/DMBS +include $(DMBS_PATH)/core.mk +include $(DMBS_PATH)/cppcheck.mk +include $(DMBS_PATH)/doxygen.mk +include $(DMBS_PATH)/dfu.mk +include $(DMBS_PATH)/gcc.mk +include $(DMBS_PATH)/hid.mk +include $(DMBS_PATH)/avrdude.mk +include $(DMBS_PATH)/atprogram.mk |