diff options
Diffstat (limited to 'lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib')
4 files changed, 0 insertions, 1061 deletions
diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.c b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.c deleted file mode 100644 index c0fd16ccc..000000000 --- a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.c +++ /dev/null @@ -1,534 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Functions to manage the physical Dataflash media, including reading and writing of - * blocks of data. These functions are called by the SCSI layer when data must be stored - * or retrieved to/from the physical storage media. If a different media is used (such - * as a SD card or EEPROM), functions similar to these will need to be generated. - */ - -#define INCLUDE_FROM_DATAFLASHMANAGER_C -#include "DataflashManager.h" - -/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from - * the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes - * them to the Dataflash in Dataflash page sized blocks. - * - * \param[in] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state - * \param[in] BlockAddress Data block starting address for the write sequence - * \param[in] TotalBlocks Number of blocks of data to write - */ -void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - bool UsingSecondBuffer = false; - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_SendByte(DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, CurrDFPageByte); - - /* Wait until endpoint is ready before continuing */ - if (Endpoint_WaitUntilReady()) - return; - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Write an endpoint packet sized data block to the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if the endpoint is currently empty */ - if (!(Endpoint_IsReadWriteAllowed())) - { - /* Clear the current endpoint bank */ - Endpoint_ClearOUT(); - - /* Wait until the host has sent another packet */ - if (Endpoint_WaitUntilReady()) - return; - } - - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0); - - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ - if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS)) - UsingSecondBuffer = !(UsingSecondBuffer); - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */ - if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); - } -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); - } - - /* Write one 16-byte chunk of data to the Dataflash */ - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - Dataflash_SendByte(Endpoint_Read_8()); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - - /* Check if the current command is being aborted by the host */ - if (MSInterfaceInfo->State.IsMassStoreReset) - return; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0x00); - Dataflash_WaitWhileBusy(); - - /* If the endpoint is empty, clear it ready for the next packet from the host */ - if (!(Endpoint_IsReadWriteAllowed())) - Endpoint_ClearOUT(); - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into - * the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash - * and writes them in OS sized blocks to the endpoint. - * - * \param[in] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state - * \param[in] BlockAddress Data block starting address for the read sequence - * \param[in] TotalBlocks Number of blocks of data to read - */ -void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - - /* Wait until endpoint is ready before continuing */ - if (Endpoint_WaitUntilReady()) - return; - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Read an endpoint packet sized data block from the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if the endpoint is currently full */ - if (!(Endpoint_IsReadWriteAllowed())) - { - /* Clear the endpoint bank to send its contents to the host */ - Endpoint_ClearIN(); - - /* Wait until the endpoint is ready for more data */ - if (Endpoint_WaitUntilReady()) - return; - } - - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - } - - /* Read one 16-byte chunk of data from the Dataflash */ - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - Endpoint_Write_8(Dataflash_ReceiveByte()); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - - /* Check if the current command is being aborted by the host */ - if (MSInterfaceInfo->State.IsMassStoreReset) - return; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* If the endpoint is full, send its contents to the host */ - if (!(Endpoint_IsReadWriteAllowed())) - Endpoint_ClearIN(); - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Writes blocks (OS blocks, not Dataflash pages) to the storage medium, the board Dataflash IC(s), from - * the given RAM buffer. This routine reads in OS sized blocks from the buffer and writes them to the - * Dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the - * Dataflash. - * - * \param[in] BlockAddress Data block starting address for the write sequence - * \param[in] TotalBlocks Number of blocks of data to write - * \param[in] BufferPtr Pointer to the data source RAM buffer - */ -void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - uint8_t* BufferPtr) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - bool UsingSecondBuffer = false; - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_SendByte(DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, CurrDFPageByte); - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Write an endpoint packet sized data block to the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0); - - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Once all the Dataflash ICs have had their first buffers filled, switch buffers to maintain throughput */ - if (Dataflash_GetSelectedChip() == DATAFLASH_CHIP_MASK(DATAFLASH_TOTALCHIPS)) - UsingSecondBuffer = !(UsingSecondBuffer); - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - -#if (DATAFLASH_PAGE_SIZE > VIRTUAL_MEMORY_BLOCK_SIZE) - /* If less than one Dataflash page remaining, copy over the existing page to preserve trailing data */ - if ((TotalBlocks * (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) < (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Copy selected dataflash's current page contents to the Dataflash buffer */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_MAINMEMTOBUFF2 : DF_CMD_MAINMEMTOBUFF1); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_WaitWhileBusy(); - } -#endif - - /* Send the Dataflash buffer write command */ - Dataflash_ToggleSelectedChipCS(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2WRITE : DF_CMD_BUFF1WRITE); - Dataflash_SendAddressBytes(0, 0); - } - - /* Write one 16-byte chunk of data to the Dataflash */ - for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) - Dataflash_SendByte(*(BufferPtr++)); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* Write the Dataflash buffer contents back to the Dataflash page */ - Dataflash_WaitWhileBusy(); - Dataflash_SendByte(UsingSecondBuffer ? DF_CMD_BUFF2TOMAINMEMWITHERASE : DF_CMD_BUFF1TOMAINMEMWITHERASE); - Dataflash_SendAddressBytes(CurrDFPage, 0x00); - Dataflash_WaitWhileBusy(); - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Reads blocks (OS blocks, not Dataflash pages) from the storage medium, the board Dataflash IC(s), into - * the preallocated RAM buffer. This routine reads in Dataflash page sized blocks from the Dataflash - * and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read - * the files stored on the Dataflash. - * - * \param[in] BlockAddress Data block starting address for the read sequence - * \param[in] TotalBlocks Number of blocks of data to read - * \param[out] BufferPtr Pointer to the data destination RAM buffer - */ -void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - uint8_t* BufferPtr) -{ - uint16_t CurrDFPage = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) / DATAFLASH_PAGE_SIZE); - uint16_t CurrDFPageByte = ((BlockAddress * VIRTUAL_MEMORY_BLOCK_SIZE) % DATAFLASH_PAGE_SIZE); - uint8_t CurrDFPageByteDiv16 = (CurrDFPageByte >> 4); - - /* Select the correct starting Dataflash IC for the block requested */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, CurrDFPageByte); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - - while (TotalBlocks) - { - uint8_t BytesInBlockDiv16 = 0; - - /* Read an endpoint packet sized data block from the Dataflash */ - while (BytesInBlockDiv16 < (VIRTUAL_MEMORY_BLOCK_SIZE >> 4)) - { - /* Check if end of Dataflash page reached */ - if (CurrDFPageByteDiv16 == (DATAFLASH_PAGE_SIZE >> 4)) - { - /* Reset the Dataflash buffer counter, increment the page counter */ - CurrDFPageByteDiv16 = 0; - CurrDFPage++; - - /* Select the next Dataflash chip based on the new Dataflash page index */ - Dataflash_SelectChipFromPage(CurrDFPage); - - /* Send the Dataflash main memory page read command */ - Dataflash_SendByte(DF_CMD_MAINMEMPAGEREAD); - Dataflash_SendAddressBytes(CurrDFPage, 0); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - Dataflash_SendByte(0x00); - } - - /* Read one 16-byte chunk of data from the Dataflash */ - for (uint8_t ByteNum = 0; ByteNum < 16; ByteNum++) - *(BufferPtr++) = Dataflash_ReceiveByte(); - - /* Increment the Dataflash page 16 byte block counter */ - CurrDFPageByteDiv16++; - - /* Increment the block 16 byte block counter */ - BytesInBlockDiv16++; - } - - /* Decrement the blocks remaining counter */ - TotalBlocks--; - } - - /* Deselect all Dataflash chips */ - Dataflash_DeselectChip(); -} - -/** Disables the Dataflash memory write protection bits on the board Dataflash ICs, if enabled. */ -void DataflashManager_ResetDataflashProtections(void) -{ - /* Select first Dataflash chip, send the read status register command */ - Dataflash_SelectChip(DATAFLASH_CHIP1); - Dataflash_SendByte(DF_CMD_GETSTATUS); - - /* Check if sector protection is enabled */ - if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) - { - Dataflash_ToggleSelectedChipCS(); - - /* Send the commands to disable sector protection */ - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); - } - - /* Select second Dataflash chip (if present on selected board), send read status register command */ - #if (DATAFLASH_TOTALCHIPS == 2) - Dataflash_SelectChip(DATAFLASH_CHIP2); - Dataflash_SendByte(DF_CMD_GETSTATUS); - - /* Check if sector protection is enabled */ - if (Dataflash_ReceiveByte() & DF_STATUS_SECTORPROTECTION_ON) - { - Dataflash_ToggleSelectedChipCS(); - - /* Send the commands to disable sector protection */ - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[0]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[1]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[2]); - Dataflash_SendByte(DF_CMD_SECTORPROTECTIONOFF[3]); - } - #endif - - /* Deselect current Dataflash chip */ - Dataflash_DeselectChip(); -} - -/** Performs a simple test on the attached Dataflash IC(s) to ensure that they are working. - * - * \return Boolean \c true if all media chips are working, \c false otherwise - */ -bool DataflashManager_CheckDataflashOperation(void) -{ - uint8_t ReturnByte; - - /* Test first Dataflash IC is present and responding to commands */ - Dataflash_SelectChip(DATAFLASH_CHIP1); - Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO); - ReturnByte = Dataflash_ReceiveByte(); - Dataflash_DeselectChip(); - - /* If returned data is invalid, fail the command */ - if (ReturnByte != DF_MANUFACTURER_ATMEL) - return false; - - #if (DATAFLASH_TOTALCHIPS == 2) - /* Test second Dataflash IC is present and responding to commands */ - Dataflash_SelectChip(DATAFLASH_CHIP2); - Dataflash_SendByte(DF_CMD_READMANUFACTURERDEVICEINFO); - ReturnByte = Dataflash_ReceiveByte(); - Dataflash_DeselectChip(); - - /* If returned data is invalid, fail the command */ - if (ReturnByte != DF_MANUFACTURER_ATMEL) - return false; - #endif - - return true; -} - diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h deleted file mode 100644 index e44e61835..000000000 --- a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/DataflashManager.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for DataflashManager.c. - */ - -#ifndef _DATAFLASH_MANAGER_H_ -#define _DATAFLASH_MANAGER_H_ - - /* Includes: */ - #include <avr/io.h> - - #include "../VirtualSerialMassStorage.h" - #include "../Descriptors.h" - #include "Config/AppConfig.h" - - #include <LUFA/Common/Common.h> - #include <LUFA/Drivers/USB/USB.h> - #include <LUFA/Drivers/Board/Dataflash.h> - - /* Preprocessor Checks: */ - #if (DATAFLASH_PAGE_SIZE % 16) - #error Dataflash page size must be a multiple of 16 bytes. - #endif - - /* Defines: */ - /** Total number of bytes of the storage medium, comprised of one or more Dataflash ICs. */ - #define VIRTUAL_MEMORY_BYTES ((uint32_t)DATAFLASH_PAGES * DATAFLASH_PAGE_SIZE * DATAFLASH_TOTALCHIPS) - - /** Block size of the device. This is kept at 512 to remain compatible with the OS despite the underlying - * storage media (Dataflash) using a different native block size. Do not change this value. - */ - #define VIRTUAL_MEMORY_BLOCK_SIZE 512 - - /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. Do not - * change this value; change VIRTUAL_MEMORY_BYTES instead to alter the media size. - */ - #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - - /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ - #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - - /* Function Prototypes: */ - void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks); - void DataflashManager_ReadBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const uint32_t BlockAddress, - uint16_t TotalBlocks); - void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); - void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, - uint16_t TotalBlocks, - uint8_t* BufferPtr) ATTR_NON_NULL_PTR_ARG(3); - void DataflashManager_ResetDataflashProtections(void); - bool DataflashManager_CheckDataflashOperation(void); - -#endif - diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c deleted file mode 100644 index 8780d1603..000000000 --- a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.c +++ /dev/null @@ -1,349 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * SCSI command processing routines, for SCSI commands issued by the host. Mass Storage - * devices use a thin "Bulk-Only Transport" protocol for issuing commands and status information, - * which wrap around standard SCSI device commands for controlling the actual storage medium. - */ - -#define INCLUDE_FROM_SCSI_C -#include "SCSI.h" - -/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's - * features and capabilities. - */ -static const SCSI_Inquiry_Response_t InquiryData = - { - .DeviceType = DEVICE_TYPE_BLOCK, - .PeripheralQualifier = 0, - - .Removable = true, - - .Version = 0, - - .ResponseDataFormat = 2, - .NormACA = false, - .TrmTsk = false, - .AERC = false, - - .AdditionalLength = 0x1F, - - .SoftReset = false, - .CmdQue = false, - .Linked = false, - .Sync = false, - .WideBus16Bit = false, - .WideBus32Bit = false, - .RelAddr = false, - - .VendorID = "LUFA", - .ProductID = "Dataflash Disk", - .RevisionID = {'0','.','0','0'}, - }; - -/** Structure to hold the sense data for the last issued SCSI command, which is returned to the host after a SCSI REQUEST SENSE - * command is issued. This gives information on exactly why the last command failed to complete. - */ -static SCSI_Request_Sense_Response_t SenseData = - { - .ResponseCode = 0x70, - .AdditionalLength = 0x0A, - }; - - -/** Main routine to process the SCSI command located in the Command Block Wrapper read from the host. This dispatches - * to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns - * a command failure due to a ILLEGAL REQUEST. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise - */ -bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - bool CommandSuccess = false; - - /* Run the appropriate SCSI command hander function based on the passed command */ - switch (MSInterfaceInfo->State.CommandBlock.SCSICommandData[0]) - { - case SCSI_CMD_INQUIRY: - CommandSuccess = SCSI_Command_Inquiry(MSInterfaceInfo); - break; - case SCSI_CMD_REQUEST_SENSE: - CommandSuccess = SCSI_Command_Request_Sense(MSInterfaceInfo); - break; - case SCSI_CMD_READ_CAPACITY_10: - CommandSuccess = SCSI_Command_Read_Capacity_10(MSInterfaceInfo); - break; - case SCSI_CMD_SEND_DIAGNOSTIC: - CommandSuccess = SCSI_Command_Send_Diagnostic(MSInterfaceInfo); - break; - case SCSI_CMD_WRITE_10: - CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_WRITE); - break; - case SCSI_CMD_READ_10: - CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ); - break; - case SCSI_CMD_MODE_SENSE_6: - CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo); - break; - case SCSI_CMD_START_STOP_UNIT: - case SCSI_CMD_TEST_UNIT_READY: - case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: - case SCSI_CMD_VERIFY_10: - /* These commands should just succeed, no handling required */ - CommandSuccess = true; - MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - break; - default: - /* Update the SENSE key to reflect the invalid command */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_COMMAND, - SCSI_ASENSEQ_NO_QUALIFIER); - break; - } - - /* Check if command was successfully processed */ - if (CommandSuccess) - { - SCSI_SET_SENSE(SCSI_SENSE_KEY_GOOD, - SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - - return true; - } - - return false; -} - -/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features - * and capabilities to the host. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint16_t AllocationLength = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]); - uint16_t BytesTransferred = MIN(AllocationLength, sizeof(InquiryData)); - - /* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */ - if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) || - MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]) - { - /* Optional but unsupported bits set - update the SENSE key and fail the request */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_FIELD_IN_CDB, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - Endpoint_Write_Stream_LE(&InquiryData, BytesTransferred, NULL); - - /* Pad out remaining bytes with 0x00 */ - Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); - - /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - - return true; -} - -/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command, - * including the error code and additional error information so that the host can determine why a command failed to complete. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint8_t AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4]; - uint8_t BytesTransferred = MIN(AllocationLength, sizeof(SenseData)); - - Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL); - Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL); - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= BytesTransferred; - - return true; -} - -/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity - * on the selected Logical Unit (drive), as a number of OS-sized blocks. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - uint32_t LastBlockAddressInLUN = (LUN_MEDIA_BLOCKS - 1); - uint32_t MediaBlockSize = VIRTUAL_MEMORY_BLOCK_SIZE; - - Endpoint_Write_Stream_BE(&LastBlockAddressInLUN, sizeof(LastBlockAddressInLUN), NULL); - Endpoint_Write_Stream_BE(&MediaBlockSize, sizeof(MediaBlockSize), NULL); - Endpoint_ClearIN(); - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 8; - - return true; -} - -/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the - * board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is - * supported. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - /* Check to see if the SELF TEST bit is not set */ - if (!(MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & (1 << 2))) - { - /* Only self-test supported - update SENSE key and fail the command */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_INVALID_FIELD_IN_CDB, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Check to see if all attached Dataflash ICs are functional */ - if (!(DataflashManager_CheckDataflashOperation())) - { - /* Update SENSE key with a hardware error condition and return command fail */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_HARDWARE_ERROR, - SCSI_ASENSE_NO_ADDITIONAL_INFORMATION, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Succeed the command and update the bytes transferred counter */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength = 0; - - return true; -} - -/** Command processing for an issued SCSI READ (10) or WRITE (10) command. This command reads in the block start address - * and total number of blocks to process, then calls the appropriate low-level Dataflash routine to handle the actual - * reading and writing of the data. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE) - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const bool IsDataRead) -{ - uint32_t BlockAddress; - uint16_t TotalBlocks; - - /* Check if the disk is write protected or not */ - if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY) - { - /* Block address is invalid, update SENSE key and return command fail */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT, - SCSI_ASENSE_WRITE_PROTECTED, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ - BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); - - /* Load in the 16-bit total blocks (SCSI uses big-endian, so have to reverse the byte order) */ - TotalBlocks = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[7]); - - /* Check if the block address is outside the maximum allowable value for the LUN */ - if (BlockAddress >= LUN_MEDIA_BLOCKS) - { - /* Block address is invalid, update SENSE key and return command fail */ - SCSI_SET_SENSE(SCSI_SENSE_KEY_ILLEGAL_REQUEST, - SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE, - SCSI_ASENSEQ_NO_QUALIFIER); - - return false; - } - - #if (TOTAL_LUNS > 1) - /* Adjust the given block address to the real media address based on the selected LUN */ - BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS); - #endif - - /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ - if (IsDataRead == DATA_READ) - DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); - else - DataflashManager_WriteBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); - - /* Update the bytes transferred counter and succeed the command */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= ((uint32_t)TotalBlocks * VIRTUAL_MEMORY_BLOCK_SIZE); - - return true; -} - -/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about - * the SCSI device, as well as the device's Write Protect status. - * - * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with - * - * \return Boolean \c true if the command completed successfully, \c false otherwise. - */ -static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) -{ - /* Send an empty header response with the Write Protect flag status */ - Endpoint_Write_8(0x00); - Endpoint_Write_8(0x00); - Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00); - Endpoint_Write_8(0x00); - Endpoint_ClearIN(); - - /* Update the bytes transferred counter and succeed the command */ - MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4; - - return true; -} - diff --git a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h b/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h deleted file mode 100644 index e16c2d46d..000000000 --- a/lib/lufa/Demos/Device/ClassDriver/VirtualSerialMassStorage/Lib/SCSI.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for SCSI.c. - */ - -#ifndef _SCSI_H_ -#define _SCSI_H_ - - /* Includes: */ - #include <avr/io.h> - #include <avr/pgmspace.h> - - #include <LUFA/Drivers/USB/USB.h> - - #include "../VirtualSerialMassStorage.h" - #include "../Descriptors.h" - #include "DataflashManager.h" - #include "Config/AppConfig.h" - - /* Macros: */ - /** Macro to set the current SCSI sense data to the given key, additional sense code and additional sense qualifier. This - * is for convenience, as it allows for all three sense values (returned upon request to the host to give information about - * the last command failure) in a quick and easy manner. - * - * \param[in] Key New SCSI sense key to set the sense code to - * \param[in] Acode New SCSI additional sense key to set the additional sense code to - * \param[in] Aqual New SCSI additional sense key qualifier to set the additional sense qualifier code to - */ - #define SCSI_SET_SENSE(Key, Acode, Aqual) do { SenseData.SenseKey = (Key); \ - SenseData.AdditionalSenseCode = (Acode); \ - SenseData.AdditionalSenseQualifier = (Aqual); } while (0) - - /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be read from the storage medium. */ - #define DATA_READ true - - /** Macro for the \ref SCSI_Command_ReadWrite_10() function, to indicate that data is to be written to the storage medium. */ - #define DATA_WRITE false - - /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a Block Media device. */ - #define DEVICE_TYPE_BLOCK 0x00 - - /** Value for the DeviceType entry in the SCSI_Inquiry_Response_t enum, indicating a CD-ROM device. */ - #define DEVICE_TYPE_CDROM 0x05 - - /* Function Prototypes: */ - bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - - #if defined(INCLUDE_FROM_SCSI_C) - static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_Read_Capacity_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, - const bool IsDataRead); - static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); - #endif - -#endif - |