aboutsummaryrefslogtreecommitdiffstats
path: root/lib/lufa/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt
diff options
context:
space:
mode:
Diffstat (limited to 'lib/lufa/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt')
-rw-r--r--lib/lufa/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt68
1 files changed, 0 insertions, 68 deletions
diff --git a/lib/lufa/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt b/lib/lufa/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt
deleted file mode 100644
index 4b07261c4..000000000
--- a/lib/lufa/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt
+++ /dev/null
@@ -1,68 +0,0 @@
-/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mass Storage Host Demo
- *
- * \section Sec_Compat Demo Compatibility:
- *
- * The following list indicates what microcontrollers are compatible with this demo.
- *
- * \li Series 7 USB AVRs (AT90USBxxx7)
- *
- * \section Sec_Info USB Information:
- *
- * The following table gives a rundown of the USB utilization of this demo.
- *
- * <table>
- * <tr>
- * <td><b>USB Mode:</b></td>
- * <td>Host</td>
- * </tr>
- * <tr>
- * <td><b>USB Class:</b></td>
- * <td>Mass Storage Device</td>
- * </tr>
- * <tr>
- * <td><b>USB Subclass:</b></td>
- * <td>Bulk Only</td>
- * </tr>
- * <tr>
- * <td><b>Relevant Standards:</b></td>
- * <td>USBIF Mass Storage Standard \n
- * USB Bulk-Only Transport Standard \n
- * SCSI Primary Commands Specification \n
- * SCSI Block Commands Specification</td>
- * </tr>
- * <tr>
- * <td><b>Supported USB Speeds:</b></td>
- * <td>Full Speed Mode</td>
- * </tr>
- * </table>
- *
- * \section Sec_Description Project Description:
- *
- * Mass Storage host demonstration application. This gives a simple reference
- * application for implementing a USB Mass Storage host, for USB storage devices
- * using the standard Mass Storage USB profile.
- *
- * The first 512 bytes (boot sector) of an attached disk's memory will be dumped
- * out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
- * AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
- * of the disk will be dumped to the serial port.
- *
- * \section Sec_Options Project Options
- *
- * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- * <table>
- * <tr>
- * <td>
- * None
- * </td>
- * </tr>
- * </table>
- */
-