diff options
Diffstat (limited to 'lib/lufa/LUFA/Build/DMBS')
25 files changed, 0 insertions, 2295 deletions
diff --git a/lib/lufa/LUFA/Build/DMBS/.gitignore b/lib/lufa/LUFA/Build/DMBS/.gitignore deleted file mode 100644 index 938768908..000000000 --- a/lib/lufa/LUFA/Build/DMBS/.gitignore +++ /dev/null @@ -1,9 +0,0 @@ -*.lss -*.bin -*.elf -*.hex -*.eep -*.map -*.o -*.d -*.sym diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/HID_EEPROM_Loader.c b/lib/lufa/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/HID_EEPROM_Loader.c deleted file mode 100644 index 35ea2d79b..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/HID_EEPROM_Loader.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - DMBS Build System - Released into the public domain. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com - */ - -/** \file - * - * Special application to extract an EEPROM image stored in FLASH memory, and - * copy it to the device EEPROM. This application is designed to be used with - * the HID build system module of DMBS to program the EEPROM of a target device - * that uses the HID bootloader protocol, which does not have native EEPROM - * programming support. - */ - -#include <avr/io.h> -#include <avr/eeprom.h> -#include <avr/pgmspace.h> - -/* References to the binary EEPROM data linked in the AVR's FLASH memory space */ -extern const char _binary_InputEEData_bin_start[]; -extern const char _binary_InputEEData_bin_end[]; -extern const char _binary_InputEEData_bin_size[]; - -/* Friendly names for the embedded binary data stored in FLASH memory space */ -#define InputEEData _binary_InputEEData_bin_start -#define InputEEData_size ((int)_binary_InputEEData_bin_size) - -int main(void) -{ - /* Copy out the embedded EEPROM data from FLASH to EEPROM memory space */ - for (uint16_t i = 0; i < InputEEData_size; i++) - eeprom_update_byte((uint8_t*)i, pgm_read_byte(&InputEEData[i])); - - /* Infinite loop once complete */ - for (;;); -} diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/makefile b/lib/lufa/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/makefile deleted file mode 100644 index 879eda8cf..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/HID_EEPROM_Loader/makefile +++ /dev/null @@ -1,35 +0,0 @@ -# -# DMBS Build System -# Released into the public domain. -# -# dean [at] fourwalledcubicle [dot] com -# www.fourwalledcubicle.com -# - -# Run "make help" for target help. - -MCU = atmega128 -ARCH = AVR8 -F_CPU = 1000000 -OPTIMIZATION = s -TARGET = HID_EEPROM_Loader -SRC = $(TARGET).c -CC_FLAGS = -LD_FLAGS = -OBJECT_FILES = InputEEData.o - -# Default target -all: - -# Determine the AVR sub-architecture of the build main application object file -FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1) - -# Create a linkable object file with the input binary EEPROM data stored in the FLASH section -InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST) - @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\" - avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@ - -# Include LUFA build script makefiles -include ../core.mk -include ../gcc.mk -include ../hid.mk diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/License.txt b/lib/lufa/LUFA/Build/DMBS/DMBS/License.txt deleted file mode 100644 index 322c7624e..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/License.txt +++ /dev/null @@ -1,32 +0,0 @@ - DMBS Build System - Released into the public domain. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com - - - -This is free and unencumbered software released into the public domain. - -Anyone is free to copy, modify, publish, use, compile, sell, or -distribute this software, either in source code form or as a compiled -binary, for any purpose, commercial or non-commercial, and by any -means. - -In jurisdictions that recognize copyright laws, the author or authors -of this software dedicate any and all copyright interest in the -software to the public domain. We make this dedication for the benefit -of the public at large and to the detriment of our heirs and -successors. We intend this dedication to be an overt act of -relinquishment in perpetuity of all present and future rights to this -software under copyright law. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF -MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. -IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR -OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, -ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -OTHER DEALINGS IN THE SOFTWARE. - -For more information, please refer to <http://unlicense.org/> diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/ModulesOverview.md b/lib/lufa/LUFA/Build/DMBS/DMBS/ModulesOverview.md deleted file mode 100644 index 1fd9cc11c..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/ModulesOverview.md +++ /dev/null @@ -1,38 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Modules Overview ----------------- - -The following modules are currently included: - - - [ATPROGRAM](atprogram.md) - Device Programming - - [AVRDUDE](avrdude.md) - Device Programming - - [CORE](core.md) - DMBS Core Functionality - - [CPPCHECK](cppcheck.md) - Static Code Analysis - - [DFU](dfu.md) - Device Programming - - [DOXYGEN](doxygen.md) - Automated Source Code Documentation - - [GCC](gcc.md) - Compiling/Assembling/Linking with GCC - - [HID](hid.md) - Device Programming - -## Importing modules into your project makefile - -To use a module, it is recommended to add the following boilerplate to your -makefile: - - # Include DMBS build script makefiles - DMBS_PATH ?= ../DMBS - -Which can then used to indicate the location of your DMBS installation, relative -to the current directory, when importing modules. For example: - - DMBS_PATH ?= ../DMBS - include $(DMBS_PATH)/core.mk - include $(DMBS_PATH)/gcc.mk - -Imports the `CORE` and `GCC` modules from DMBS using a single path relative to -your project's makefile. - -If you wish to write your own DMBS module(s), -[see the documentation here for more details.](WritingYourOwnModules.md) diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/WritingYourOwnModules.md b/lib/lufa/LUFA/Build/DMBS/DMBS/WritingYourOwnModules.md deleted file mode 100644 index 16df7a53b..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/WritingYourOwnModules.md +++ /dev/null @@ -1,95 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Writing Your Own Modules ------------------------- - -A DMBS module consists of the several boilerplate sections, explained below. - -## The DMBS module hooks - -Your module needs to advertise to DMBS its name, its makefile targets, the -required and optional variables, and the variables and macros the module -provides for use elsewhere. This is achieved with the following section: - - DMBS_BUILD_MODULES += EXAMPLE - DMBS_BUILD_TARGETS += example-target another-target - DMBS_BUILD_MANDATORY_VARS += MANDATORY_NAME ALSO_MANDATORY - DMBS_BUILD_OPTIONAL_VARS += OPTIONAL_NAME ALSO_OPTIONAL - DMBS_BUILD_PROVIDED_VARS += MEANING_OF_LIFE - DMBS_BUILD_PROVIDED_MACROS += STRIP_WHITESPACE - -The example above declares that this module is called `EXAMPLE`, and exposes the -listed targets, variable requirements and provides variables and macros. - -Your module name and provided variable/macro names must be unique, however you -can (and should) re-use variable names where appropriate if they apply to -several modules (such as `ARCH` to specify the project's microcontroller -architecture). Re-using targets is not recommended, but can be used to extend -the dependencies of another module's targets. - -## Importing the CORE module - -Next, your module should always import the DMBS `CORE` module, via the -following: - - # Conditionally import the CORE module of DMBS if it is not already imported - DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) - ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) - include $(DMBS_MODULE_PATH)/core.mk - endif - -This ensures that the `make help` target is always available. In addition, the -`CORE` module exposes some [commonly used macros and variables](core.md) to -your module. - -## Setting optional variable's defaults - -If a variable is optional, you should provide a default value. Do this via the -`?=` operator of `make`, which sets a variable's value if it has not yet been -set: - - MY_OPTIONAL_VARIABLE ?= some_default_value - -## Sanity checking user input - -Sanity checks are what make DMBS useful. Where possible, validate user input and -convert generated errors to human-friendly messages. This can be achieved by -enforcing that all the declared module mandatory variables have been set by the -user: - - # Sanity-check values of mandatory user-supplied variables - $(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) - -As well as complaining if they are set, but currently empty: - - $(call ERROR_IF_EMPTY, SOME_MANDATORY_VARIABLE) - $(call ERROR_IF_EMPTY, SOME_OPTIONAL_BUT_NON_EMPTY_VARIABLE) - -Or even if they are boolean (`Y` or `N`) variables that have an invalid value: - - $(call ERROR_IF_NONBOOL, SOME_BOOL_VARIABLE) - -## Adding targets - -The meat of a DMBS module is the targets, which are run when the user types -`make {target name}` from the command line. These can be as complex or simple -as you like. See the GNU make manual for information on writing make targets. - - example-target: - echo "Your DMBS module works!" - -## And finally, list the PHONYs - -Important in GNU Make is the concept of phony targets; this special directive -tells make that a given target should never be considered a valid file. Listing -phonies ensures that, for example, if your module had a target called `build`, -it would always run when the user types `make build` from the command line, even -if a file called `build` existed in the user project folder. - -You can list module-internal targets here, as well as mark all public targets -via the module header's `DMBS_BUILD_TARGETS` variable. - - # Phony build targets for this module - .PHONY: $(DMBS_BUILD_TARGETS) some-module-internal-target another-internal-target diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/atprogram.md b/lib/lufa/LUFA/Build/DMBS/DMBS/atprogram.md deleted file mode 100644 index ea1b0d919..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/atprogram.md +++ /dev/null @@ -1,119 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Module: ATPROGRAM ------------------ - -The ATPROGRAM module provides build targets for use with the official -`ATPROGRAM` back-end utility distributed with the free -[Atmel Studio](http://www.atmel.com) software released by Atmel. - -## Importing This Module into a Makefile: - -To use this module in your application makefile, add the following code to your -makefile: - - include $(DMBS_PATH)/atprogram.mk - -## Prerequisites: - -This module requires the `atprogram.exe` utility to be available in your -system's `PATH` variable. The `atprogram.exe` utility is distributed in Atmel -Studio (usually) inside the application install folder's `atbackend` -subdirectory. - -## Build Targets: - -The following targets are supported by this module: - -<table> - <tbody> - <tr> - <td>atprogram</td> - <td>Program the device FLASH memory with the application's executable data.</td> - </tr> - <tr> - <td>atprogram-ee</td> - <td>Program the device EEPROM memory with the application's EEPROM data.</td> - </tr> - </tbody> -</table> - -## Mandatory Variables: - -The following variables must be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile to be able to use this module: - -<table> - <tbody> - <tr> - <td>MCU</td> - <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td> - </tr> - <tr> - <td>TARGET</td> - <td>Name of the application output file prefix (e.g. `TestApplication`).</td> - </tr> - </tbody> -</table> - -## Optional Variables: - -The following variables may be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile. If not specified, a default value will -be assumed. - -<table> - <tbody> - <tr> - <td>ATPROGRAM_PROGRAMMER</td> - <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. `jtagice3`). Default is `atmelice`.</td> - </tr> - <tr> - <td>ATPROGRAM_INTERFACE</td> - <td>Name of the programming interface to use when programming the target (e.g. `spi`). Default is `jtag`.</td> - </tr> - <tr> - <td>ATPROGRAM_PORT</td> - <td>Name of the communication port to use when when programming with a serially connected tool (e.g. `COM2`). Default is `usb`.</td> - </tr> - </tbody> -</table> - -## Provided Variables: - -The following variables may be referenced in a user makefile (via `$(NAME)` -syntax) if desired, as they are provided by this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no variables.</td> - </tr> - </tbody> -</table> - -## Provided Macros: - -The following macros may be referenced in a user makefile (via -`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by -this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no macros.</td> - </tr> - </tbody> -</table> - -## Module Changelog: - -The changes to this module since its initial release are listed below, as of the -DMBS version where the change was made. - -### 20160403 -Initial release. diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/atprogram.mk b/lib/lufa/LUFA/Build/DMBS/DMBS/atprogram.mk deleted file mode 100644 index a505275ae..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/atprogram.mk +++ /dev/null @@ -1,68 +0,0 @@ -# -# DMBS Build System -# Released into the public domain. -# -# dean [at] fourwalledcubicle [dot] com -# www.fourwalledcubicle.com -# - -DMBS_BUILD_MODULES += ATPROGRAM -DMBS_BUILD_TARGETS += atprogram atprogram-ee -DMBS_BUILD_MANDATORY_VARS += MCU TARGET -DMBS_BUILD_OPTIONAL_VARS += ATPROGRAM_PROGRAMMER ATPROGRAM_INTERFACE ATPROGRAM_PORT -DMBS_BUILD_PROVIDED_VARS += -DMBS_BUILD_PROVIDED_MACROS += - -# Conditionally import the CORE module of DMBS if it is not already imported -DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) -ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) - include $(DMBS_MODULE_PATH)/core.mk -endif - -# Default values of optionally user-supplied variables -ATPROGRAM_PROGRAMMER ?= atmelice -ATPROGRAM_INTERFACE ?= jtag -ATPROGRAM_PORT ?= - -# Sanity check user supplied values -$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) -$(call ERROR_IF_EMPTY, MCU) -$(call ERROR_IF_EMPTY, TARGET) -$(call ERROR_IF_EMPTY, ATPROGRAM_PROGRAMMER) -$(call ERROR_IF_EMPTY, ATPROGRAM_INTERFACE) - -# Output Messages -MSG_ATPROGRAM_CMD := ' [ATPRGRM] :' - -# Construct base atprogram command flags -BASE_ATPROGRAM_FLAGS := --tool $(ATPROGRAM_PROGRAMMER) --interface $(ATPROGRAM_INTERFACE) --device $(MCU) -ifneq ($(ATPROGRAM_PORT),) - BASE_ATPROGRAM_FLAGS += --port $(ATPROGRAM_PORT) -endif - -# Construct the flags to use for the various memory spaces -ifeq ($(ARCH), AVR8) - ATPROGRAM_FLASH_FLAGS := --chiperase --flash - ATPROGRAM_EEPROM_FLAGS := --eeprom -else ifeq ($(ARCH), XMEGA) - ATPROGRAM_FLASH_FLAGS := --erase --flash - ATPROGRAM_EEPROM_FLAGS := --eeprom -else ifeq ($(ARCH), UC3) - ATPROGRAM_FLASH_FLAGS := --erase - ATPROGRAM_EEPROM_FLAGS := --eeprom -else - $(error Unsupported architecture "$(ARCH)") -endif - -# Programs in the target FLASH memory using ATPROGRAM -atprogram: $(TARGET).elf $(MAKEFILE_LIST) - @echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" FLASH using \"$(ATPROGRAM_PROGRAMMER)\" - atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_FLASH_FLAGS) --file $< - -# Programs in the target EEPROM memory using ATPROGRAM -atprogram-ee: $(TARGET).elf $(MAKEFILE_LIST) - @echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" EEPROM using \"$(ATPROGRAM_PROGRAMMER)\" - atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_EEPROM_FLAGS) --file $< - -# Phony build targets for this module -.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/avrdude.md b/lib/lufa/LUFA/Build/DMBS/DMBS/avrdude.md deleted file mode 100644 index d6c71ce6d..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/avrdude.md +++ /dev/null @@ -1,124 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Module: AVRDUDE ------------------ - -The AVRDUDE module provides build targets for use with the official -open source `AVRDUDE` programmer utility, for the reprogramming of Atmel devices -using a wide variety of official and non-official programming devices and -bootloaders. - -## Importing This Module into a Makefile: - -To use this module in your application makefile, add the following code to your -makefile: - - include $(DMBS_PATH)/avrdude.mk - -## Prerequisites: - -This module requires the `avrdude` utility to be available in your -system's `PATH` variable. The `avrdude` utility is distributed on the project's -[official site](https://savannah.nongnu.org/projects/avrdude) but is also -made available in many *nix operating system's package managers. - -## Build Targets: - -The following targets are supported by this module: - -<table> - <tbody> - <tr> - <td>avrdude</td> - <td>Program the device FLASH memory with the application's executable data.</td> - </tr> - <tr> - <td>avrdude-ee</td> - <td>Program the device EEPROM memory with the application's EEPROM data.</td> - </tr> - </tbody> -</table> - -## Mandatory Variables: - -The following variables must be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile to be able to use this module: - -<table> - <tbody> - <tr> - <td>MCU</td> - <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td> - </tr> - <tr> - <td>TARGET</td> - <td>Name of the application output file prefix (e.g. `TestApplication`).</td> - </tr> - </tbody> -</table> - -## Optional Variables: - -The following variables may be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile. If not specified, a default value will -be assumed. - -<table> - <tbody> - <tr> - <td>AVRDUDE_PROGRAMMER</td> - <td>Name of the programmer/debugger tool or bootloader to communicate with (e.g. `jtagicemkii`). Default is `jtagicemkii`.</td> - </tr> - <tr> - <td>AVRDUDE_PORT</td> - <td>Name of the communication port to use when when programming with a serially connected tool (e.g. `COM2`). Default is `usb`.</td> - </tr> - <tr> - <td>AVRDUDE_FLAGS</td> - <td>Additional flags to pass to `avrdude` when invoking the tool. Default is empty (no additional flags).</td> - </tr> - <tr> - <td>AVRDUDE_MEMORY</td> - <td>Memory space to program when executing the `avrdude` target (e.g. 'application` for an XMEGA device). Default is `flash`.</td> - </tr> - </tbody> -</table> - -## Provided Variables: - -The following variables may be referenced in a user makefile (via `$(NAME)` -syntax) if desired, as they are provided by this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no variables.</td> - </tr> - </tbody> -</table> - -## Provided Macros: - -The following macros may be referenced in a user makefile (via -`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by -this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no macros.</td> - </tr> - </tbody> -</table> - -## Module Changelog: - -The changes to this module since its initial release are listed below, as of the -DMBS version where the change was made. - -### 20160403 -Initial release. diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/avrdude.mk b/lib/lufa/LUFA/Build/DMBS/DMBS/avrdude.mk deleted file mode 100644 index c4bac8fd0..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/avrdude.mk +++ /dev/null @@ -1,52 +0,0 @@ -# -# DMBS Build System -# Released into the public domain. -# -# dean [at] fourwalledcubicle [dot] com -# www.fourwalledcubicle.com -# - -DMBS_BUILD_MODULES += AVRDUDE -DMBS_BUILD_TARGETS += avrdude avrdude-ee -DMBS_BUILD_MANDATORY_VARS += MCU TARGET -DMBS_BUILD_OPTIONAL_VARS += AVRDUDE_PROGRAMMER AVRDUDE_PORT AVRDUDE_FLAGS AVRDUDE_MEMORY -DMBS_BUILD_PROVIDED_VARS += -DMBS_BUILD_PROVIDED_MACROS += - -# Conditionally import the CORE module of DMBS if it is not already imported -DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) -ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) - include $(DMBS_MODULE_PATH)/core.mk -endif - -# Default values of optionally user-supplied variables -AVRDUDE_PROGRAMMER ?= jtagicemkii -AVRDUDE_PORT ?= usb -AVRDUDE_FLAGS ?= -AVRDUDE_MEMORY ?= flash - -# Sanity check user supplied values -$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) -$(call ERROR_IF_EMPTY, MCU) -$(call ERROR_IF_EMPTY, TARGET) -$(call ERROR_IF_EMPTY, AVRDUDE_PROGRAMMER) -$(call ERROR_IF_EMPTY, AVRDUDE_PORT) - -# Output Messages -MSG_AVRDUDE_CMD := ' [AVRDUDE] :' - -# Construct base avrdude command flags -BASE_AVRDUDE_FLAGS := -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) - -# Programs in the target FLASH memory using AVRDUDE -avrdude: $(TARGET).hex $(MAKEFILE_LIST) - @echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" FLASH using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\" - avrdude $(BASE_AVRDUDE_FLAGS) -U $(AVRDUDE_MEMORY):w:$< $(AVRDUDE_FLAGS) - -# Programs in the target EEPROM memory using AVRDUDE -avrdude-ee: $(TARGET).eep $(MAKEFILE_LIST) - @echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" EEPROM using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\" - avrdude $(BASE_AVRDUDE_FLAGS) -U eeprom:w:$< $(AVRDUDE_FLAGS) - -# Phony build targets for this module -.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/core.md b/lib/lufa/LUFA/Build/DMBS/DMBS/core.md deleted file mode 100644 index 406abfecd..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/core.md +++ /dev/null @@ -1,136 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Module: CORE ------------- - -The CORE module provides the core DMBS infrastructure used by other DMBS -modules, and must always be imported. Additionally, this module provides the -help system for DMBS. - -## Importing This Module into a Makefile: - -To use this module in your application makefile, add the following code to your -makefile: - - include $(DMBS_PATH)/core.mk - -## Prerequisites: - -None. - -## Build Targets: - -The following targets are supported by this module: - -<table> - <tbody> - <tr> - <td>help</td> - <td>Show help for the current project, including a list of all available targets, variables and macros from the imported modules.</td> - </tr> - <tr> - <td>list_targets</td> - <td>Show a list of all build targets from the imported modules.</td> - </tr> - <tr> - <td>list_modules</td> - <td>Show a list of all imported modules.</td> - </tr> - <tr> - <td>list_mandatory</td> - <td>Show a list of all mandatory variables from the imported modules.</td> - </tr> - <tr> - <td>list_optional</td> - <td>Show a list of all optional variables from the imported modules.</td> - </tr> - <tr> - <td>list_provided</td> - <td>Show a list of all variables provided by the imported modules.</td> - </tr> - <tr> - <td>list_macros</td> - <td>Show a list of all macros provided by the imported modules.</td> - </tr> - </tbody> -</table> - -## Mandatory Variables: - -The following variables must be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile to be able to use this module: - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module has no mandatory variables.</td> - </tr> - </tbody> -</table> - -## Optional Variables: - -The following variables may be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile. If not specified, a default value will -be assumed. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module has no optional variables.</td> - </tr> - </tbody> -</table> - -## Provided Variables: - -The following variables may be referenced in a user makefile (via `$(NAME)` -syntax) if desired, as they are provided by this module. - -<table> - <tbody> - <tr> - <td>DMBS_VERSION</td> - <td>Current version of this DMBS release, as a ISO 8601 integer (such as `20160403` for `2016-04-03`).</td> - </tr> - </tbody> -</table> - -## Provided Macros: - -The following macros may be referenced in a user makefile (via -`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by -this module. - -<table> - <tbody> - <tr> - <td>DMBS_CHECK_VERSION</td> - <td>Macro to check the current DMBS version against the first argument and abort if the required version is newer than the current version.</td> - </tr> - <tr> - <td>ERROR_IF_UNSET</td> - <td>Macro to check the given makefile variable name passed as the first argument, and abort if it has not been set by any makefile module.</td> - </tr> - <tr> - <td>ERROR_IF_EMPTY</td> - <td>Macro to check the given makefile variable name passed as the first argument, and abort if it has an empty value.</td> - </tr> - <tr> - <td>ERROR_IF_NONBOOL</td> - <td>Macro to check the given makefile variable name passed as the first argument, and abort if it has a value other than `Y` or `N`.</td> - </tr> - </tbody> -</table> - -## Module Changelog: - -The changes to this module since its initial release are listed below, as of the -DMBS version where the change was made. - -### 20160403 -Initial release. diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/core.mk b/lib/lufa/LUFA/Build/DMBS/DMBS/core.mk deleted file mode 100644 index 1edbd178c..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/core.mk +++ /dev/null @@ -1,147 +0,0 @@ -# -# DMBS Build System -# Released into the public domain. -# -# dean [at] fourwalledcubicle [dot] com -# www.fourwalledcubicle.com -# - -DMBS_BUILD_MODULES += CORE -DMBS_BUILD_TARGETS += help list_targets list_modules list_mandatory list_optional list_provided list_macros -DMBS_BUILD_MANDATORY_VARS += -DMBS_BUILD_OPTIONAL_VARS += -DMBS_BUILD_PROVIDED_VARS += DMBS_VERSION -DMBS_BUILD_PROVIDED_MACROS += DMBS_CHECK_VERSION ERROR_IF_UNSET ERROR_IF_EMPTY ERROR_IF_NONBOOL - -SHELL = /bin/sh - -# Current DMBS release version -DMBS_VERSION := 20170426 - -# Macro to check the DMBS version, aborts if the given DMBS version is below the current version -DMBS_CHECK_VERSION ?= $(if $(filter-out 0, $(shell test $(DMBS_VERSION) -lt $(1); echo $$?)), , $(error DMBS version $(1) or newer required, current version is $(DMBS_VERSION))) - -# Macros to use in other modules to check various conditions -ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set)) -ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank)) -ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N)) - -# Converts a given input to a printable output using "(None)" if no items are in the list -CONVERT_TO_PRINTABLE = $(if $(strip $(1)), $(1), (None)) - -# Build sorted and filtered lists of the included build module data -SORTED_DMBS_BUILD_MODULES = $(sort $(DMBS_BUILD_MODULES)) -SORTED_DMBS_BUILD_TARGETS = $(sort $(DMBS_BUILD_TARGETS)) -SORTED_DMBS_MANDATORY_VARS = $(sort $(DMBS_BUILD_MANDATORY_VARS)) -SORTED_DMBS_OPTIONAL_VARS = $(filter-out $(SORTED_DMBS_MANDATORY_VARS), $(sort $(DMBS_BUILD_OPTIONAL_VARS))) -SORTED_DMBS_PROVIDED_VARS = $(sort $(DMBS_BUILD_PROVIDED_VARS)) -SORTED_DMBS_PROVIDED_MACROS = $(sort $(DMBS_BUILD_PROVIDED_MACROS)) - -# Create printable versions of the sorted build module data (use "(None)" when no data is available) -PRINTABLE_DMBS_BUILD_MODULES = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_BUILD_MODULES)) -PRINTABLE_DMBS_BUILD_TARGETS = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_BUILD_TARGETS)) -PRINTABLE_DMBS_MANDATORY_VARS = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_MANDATORY_VARS)) -PRINTABLE_DMBS_OPTIONAL_VARS = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_OPTIONAL_VARS)) -PRINTABLE_DMBS_PROVIDED_VARS = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_PROVIDED_VARS)) -PRINTABLE_DMBS_PROVIDED_MACROS = $(call CONVERT_TO_PRINTABLE, $(SORTED_DMBS_PROVIDED_MACROS)) - -help: - @echo "===================================================================" - @echo " The DMBS Build System " - @echo " By Dean Camera { dean @ fourwalledcubicle . com } " - @echo "===================================================================" - @echo "DESCRIPTION: " - @echo " This build system is a set of makefile modules for (GNU) Make, to " - @echo " provide a simple system for building DMBS powered applications. " - @echo " Each makefile module can be included from within a user makefile, " - @echo " to expose the build rules documented in the comments at the top of" - @echo " each build module. " - @echo " " - @echo "USAGE: " - @echo " To execute a rule, define all variables indicated in the desired " - @echo " module as a required parameter before including the build module " - @echo " in your project makefile. Parameters marked as optional will " - @echo " assume a default value in the modules if not user-assigned. " - @echo " " - @echo " By default the target output shows both a friendly summary, as " - @echo " well as the actual invoked command. To suppress the output of the " - @echo " invoked commands and show only the friendly command output, run " - @echo " make with the \"-s\" switch added before the target(s). " - @echo "===================================================================" - @echo " " - @echo " Currently used build system modules in this application: " - @echo " " - @printf " %b" "$(PRINTABLE_DMBS_BUILD_MODULES:%= - %\n)" - @echo " " - @echo " " - @echo " Currently available build targets in this application: " - @echo " " - @printf " %b" "$(PRINTABLE_DMBS_BUILD_TARGETS:%= - %\n)" - @echo " " - @echo " " - @echo " Mandatory variables required by the selected build Modules: " - @echo " " - @printf " %b" "$(PRINTABLE_DMBS_MANDATORY_VARS:%= - %\n)" - @echo " " - @echo " " - @echo " Optional variables required by the selected build Modules: " - @echo " " - @printf " %b" "$(PRINTABLE_DMBS_OPTIONAL_VARS:%= - %\n)" - @echo " " - @echo " " - @echo " Variables provided by the selected build Modules: " - @echo " " - @printf " %b" "$(PRINTABLE_DMBS_PROVIDED_VARS:%= - %\n)" - @echo " " - @echo " " - @echo " Macros provided by the selected build Modules: " - @echo " " - @printf " %b" "$(PRINTABLE_DMBS_PROVIDED_MACROS:%= - %\n)" - @echo " " - @echo "===================================================================" - @echo " The DMBS Build System $(DMBS_VERSION) - Making MAKE easier." - @echo "===================================================================" - -# Lists build modules included by the project makefile, in alphabetical order -list_modules: - @echo Currently Used Build System Modules: - @printf " %b" "$(PRINTABLE_DMBS_BUILD_MODULES:%= - %\n)" - -# Lists build targets included by the project makefile, in alphabetical order -list_targets: - @echo Currently Available Build Targets: - @printf " %b" "$(PRINTABLE_DMBS_BUILD_TARGETS:%= - %\n)" - -# Lists mandatory variables that must be set by the project makefile, in alphabetical order -list_mandatory: - @echo Mandatory Variables for Included Modules: - @printf " %b" "$(PRINTABLE_DMBS_MANDATORY_VARS:%= - %\n)" - -# Lists optional variables that must be set by the project makefile, in alphabetical order -list_optional: - @echo Optional Variables for Included Modules: - @printf " %b" "$(PRINTABLE_DMBS_OPTIONAL_VARS:%= - %\n)" - -# Lists variables provided by the included build modules, in alphabetical order -list_provided: - @echo Variables Provided by the Included Modules: - @printf " %b" "$(PRINTABLE_DMBS_PROVIDED_VARS:%= - %\n)" - -# Lists macros provided by the included build modules, in alphabetical order -list_macros: - @echo Macros Provided by the Included Modules: - @printf " %b" "$(PRINTABLE_DMBS_PROVIDED_MACROS:%= - %\n)" - -# Debugging; "make print-VARNAME" will output the variable VARNAME's value -print-%: - @printf "%s = %s" $(@:print-%=%) $($(@:print-%=%)) - -# Disable default in-built make rules (those that are needed are explicitly -# defined, and doing so has performance benefits when recursively building) -ifeq ($(filter -r,$(MAKEFLAGS)),) - MAKEFLAGS += -r -endif -.SUFFIXES: - -# Phony build targets for this module -.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/cppcheck.md b/lib/lufa/LUFA/Build/DMBS/DMBS/cppcheck.md deleted file mode 100644 index ec0e38d02..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/cppcheck.md +++ /dev/null @@ -1,134 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Module: CPPCHECK ------------------ - -The CPPCHECK module provides build targets to perform static analysis of the -user application, using the open source `cppcheck` tool. - -## Importing This Module into a Makefile: - -To use this module in your application makefile, add the following code to your -makefile: - - include $(DMBS_PATH)/cppcheck.mk - -## Prerequisites: - -This module requires the `cppcheck` utility to be available in your system's -`PATH` variable. The `cppcheck` utility is distributed on the project's -[official site](http://cppcheck.sourceforge.net/) but is also -made available in many *nix operating system's package managers. - -## Build Targets: - -The following targets are supported by this module: - -<table> - <tbody> - <tr> - <td>cppcheck</td> - <td>Scan the project with CPPCHECK, and show all discovered issues.</td> - </tr> - <tr> - <td>cppcheck-config</td> - <td>Check the project with CPPCHECK, to find missing header paths.</td> - </tr> - </tbody> -</table> - -## Mandatory Variables: - -The following variables must be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile to be able to use this module: - -<table> - <tbody> - <tr> - <td>SRC</td> - <td>List of all project source files to scan.</td> - </tr> - </tbody> -</table> - -## Optional Variables: - -The following variables may be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile. If not specified, a default value will -be assumed. - -<table> - <tbody> - <tr> - <td>CPPCHECK_INCLUDES</td> - <td>Extra include paths to search, for any missing header files. Default is empty (no additional paths).</td> - </tr> - <tr> - <td>CPPCHECK_EXCLUDES</td> - <td>List of source files, file paths or path fragments to exclude from the scan. Default is empty (no exclusions).</td> - </tr> - <tr> - <td>CPPCHECK_MSG_TEMPLATE</td> - <td>Template for error and warning message output. Default is `{file}:{line}: {severity} ({id}): {message}`.</td> - </tr> - <tr> - <td>CPPCHECK_ENABLE</td> - <td>List of CPPCHECK checks to enable. Default is `all`.</td> - </tr> - <tr> - <td>CPPCHECK_SUPPRESS</td> - <td>List of CPPCHECK checks to ignore. Default is `variableScope missingInclude`.</td> - </tr> - <tr> - <td>CPPCHECK_FAIL_ON_WARNING</td> - <td>Boolean, if `Y` the build will fail if CPPCHECK discovers any errors or warnings. If `N`, fail only on errors. Default is `Y`.</td> - </tr> - <tr> - <td>CPPCHECK_QUIET</td> - <td>Boolean, if `Y` CPPCHECK will suppress all output except for discovered errors or warnings. If `N`, scan progress will be emitted. Default is `Y`.</td> - </tr> - <tr> - <td>CPPCHECK_FLAGS_</td> - <td>Additional flags to pass to CPPCHECK when scans are started. Default is empty (no additional flags).</td> - </tr> - </tbody> -</table> - -## Provided Variables: - -The following variables may be referenced in a user makefile (via `$(NAME)` -syntax) if desired, as they are provided by this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no variables.</td> - </tr> - </tbody> -</table> - -## Provided Macros: - -The following macros may be referenced in a user makefile (via -`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by -this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no macros.</td> - </tr> - </tbody> -</table> - -## Module Changelog: - -The changes to this module since its initial release are listed below, as of the -DMBS version where the change was made. - -### 20160403 -Initial release. diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/cppcheck.mk b/lib/lufa/LUFA/Build/DMBS/DMBS/cppcheck.mk deleted file mode 100644 index 9b82fc3b0..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/cppcheck.mk +++ /dev/null @@ -1,66 +0,0 @@ -# -# DMBS Build System -# Released into the public domain. -# -# dean [at] fourwalledcubicle [dot] com -# www.fourwalledcubicle.com -# - -DMBS_BUILD_MODULES += CPPCHECK -DMBS_BUILD_TARGETS += cppcheck cppcheck-config -DMBS_BUILD_MANDATORY_VARS += SRC -DMBS_BUILD_OPTIONAL_VARS += CPPCHECK_INCLUDES CPPCHECK_EXCLUDES CPPCHECK_MSG_TEMPLATE CPPCHECK_ENABLE \ - CPPCHECK_SUPPRESS CPPCHECK_FAIL_ON_WARNING CPPCHECK_QUIET CPPCHECK_FLAGS -DMBS_BUILD_PROVIDED_VARS += -DMBS_BUILD_PROVIDED_MACROS += - -# Conditionally import the CORE module of DMBS if it is not already imported -DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) -ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) - include $(DMBS_MODULE_PATH)/core.mk -endif - -# Default values of optionally user-supplied variables -CPPCHECK_INCLUDES ?= -CPPCHECK_EXCLUDES ?= -CPPCHECK_MSG_TEMPLATE ?= {file}:{line}: {severity} ({id}): {message} -CPPCHECK_ENABLE ?= all -CPPCHECK_SUPPRESS ?= variableScope missingInclude -CPPCHECK_FAIL_ON_WARNING ?= Y -CPPCHECK_QUIET ?= Y -CPPCHECK_FLAGS ?= - -# Sanity check user supplied values -$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) -$(call ERROR_IF_EMPTY, SRC) -$(call ERROR_IF_EMPTY, CPPCHECK_MSG_TEMPLATE) -$(call ERROR_IF_EMPTY, CPPCHECK_ENABLE) -$(call ERROR_IF_NONBOOL, CPPCHECK_FAIL_ON_WARNING) -$(call ERROR_IF_NONBOOL, CPPCHECK_QUIET) - -# Build a default argument list for cppcheck -BASE_CPPCHECK_FLAGS := --template="$(CPPCHECK_MSG_TEMPLATE)" $(CPPCHECK_INCLUDES:%=-I%) $(CPPCHECK_EXCLUDES:%=-i%) --inline-suppr --force --std=c99 - -# Sanity check parameters and construct additional command line arguments to cppcheck -ifeq ($(CPPCHECK_FAIL_ON_WARNING), Y) - BASE_CPPCHECK_FLAGS += --error-exitcode=1 -endif -ifeq ($(CPPCHECK_QUIET), Y) - BASE_CPPCHECK_FLAGS += --quiet -endif - -# Output Messages -MSG_CPPCHECK_CMD := ' [CPPCHECK]:' - -# Checks the CPPCheck configuration as used in the user project, to determine if any paths are missing or invalid -cppcheck-config: $(MAKEFILE_LIST) - @echo $(MSG_CPPCHECK_CMD) Checking cppcheck configuration check on source files - cppcheck $(BASE_CPPCHECK_FLAGS) --check-config $(CPPCHECK_FLAGS) $(SRC) - -# Runs a static analysis using CPPCheck to determine if there are any issues -cppcheck: $(MAKEFILE_LIST) - @echo $(MSG_CPPCHECK_CMD) Performing static analysis on source files - cppcheck $(BASE_CPPCHECK_FLAGS) --enable=$(CPPCHECK_ENABLE) $(CPPCHECK_SUPPRESS:%=--suppress=%) $(CPPCHECK_FLAGS) $(SRC) - -# Phony build targets for this module -.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/dfu.md b/lib/lufa/LUFA/Build/DMBS/DMBS/dfu.md deleted file mode 100644 index 456bbf6f5..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/dfu.md +++ /dev/null @@ -1,122 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Module: DFU ------------------ - -The DFU module provides build targets to program a USB connected target running -a DFU class bootloader, via the official Atmel FLIP utility running via the -command line, or the open source `DFU-Programmer` tool. - -## Importing This Module into a Makefile: - -To use this module in your application makefile, add the following code to your -makefile: - - include $(DMBS_PATH)/dfu.mk - -## Prerequisites: - -This module requires the `batchisp` utility to be available in your system's -`PATH` variable. The `batchisp` utility is distributed as part of Atmel's FLIP -software which can be downloaded from the [official site](http://www.atmel.com). - -This module requires the `dfu-programmer` utility to be available in your -system's `PATH` variable. The `dfu-programmer` utility is distributed from the -[official project site](https://dfu-programmer.github.io/). - -## Build Targets: - -The following targets are supported by this module: - -<table> - <tbody> - <tr> - <td>flip</td> - <td>Program the application into the device's flash memory, using Atmel FLIP.</td> - </tr> - <tr> - <td>flip-ee</td> - <td>Program the application's EEPROM data into the device's EEPROM memory, using Atmel FLIP.</td> - </tr> - <tr> - <td>dfu</td> - <td>Program the application into the device's flash memory, using `dfu-programmer`.</td> - </tr> - <tr> - <td>dfu-ee</td> - <td>Program the application's EEPROM data into the device's EEPROM memory, using `dfu-programmer`.</td> - </tr> - </tbody> -</table> - -## Mandatory Variables: - -The following variables must be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile to be able to use this module: - -<table> - <tbody> - <tr> - <td>MCU</td> - <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td> - </tr> - <tr> - <td>TARGET</td> - <td>Name of the application output file prefix (e.g. `TestApplication`).</td> - </tr> - </tbody> -</table> - -## Optional Variables: - -The following variables may be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile. If not specified, a default value will -be assumed. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module has no optional variables.</td> - </tr> - </tbody> -</table> - -## Provided Variables: - -The following variables may be referenced in a user makefile (via `$(NAME)` -syntax) if desired, as they are provided by this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no variables.</td> - </tr> - </tbody> -</table> - -## Provided Macros: - -The following macros may be referenced in a user makefile (via -`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by -this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no macros.</td> - </tr> - </tbody> -</table> - -## Module Changelog: - -The changes to this module since its initial release are listed below, as of the -DMBS version where the change was made. - -### 20160403 -Initial release. diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/dfu.mk b/lib/lufa/LUFA/Build/DMBS/DMBS/dfu.mk deleted file mode 100644 index 1eb22b864..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/dfu.mk +++ /dev/null @@ -1,62 +0,0 @@ -# -# DMBS Build System -# Released into the public domain. -# -# dean [at] fourwalledcubicle [dot] com -# www.fourwalledcubicle.com -# - -DMBS_BUILD_MODULES += DFU -DMBS_BUILD_TARGETS += flip flip-ee dfu dfu-ee -DMBS_BUILD_MANDATORY_VARS += MCU TARGET -DMBS_BUILD_OPTIONAL_VARS += -DMBS_BUILD_PROVIDED_VARS += -DMBS_BUILD_PROVIDED_MACROS += - -# Conditionally import the CORE module of DMBS if it is not already imported -DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) -ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) - include $(DMBS_MODULE_PATH)/core.mk -endif - -# Sanity-check values of mandatory user-supplied variables -$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) -$(call ERROR_IF_EMPTY, MCU) -$(call ERROR_IF_EMPTY, TARGET) - -# Output Messages -MSG_COPY_CMD := ' [CP] :' -MSG_REMOVE_CMD := ' [RM] :' -MSG_DFU_CMD := ' [DFU] :' - -# Programs in the target FLASH memory using BATCHISP, the command line tool used by FLIP -flip: $(TARGET).hex $(MAKEFILE_LIST) - @echo $(MSG_DFU_CMD) Programming FLASH with batchisp using \"$<\" - batchisp -hardware usb -device $(MCU) -operation erase f loadbuffer $< program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - -# Programs in the target EEPROM memory using BATCHISP, the command line tool used by FLIP -flip-ee: $(TARGET).eep $(MAKEFILE_LIST) - @echo $(MSG_COPY_CMD) Copying EEP file to temporary file \"$<.hex\" - cp $< $<.hex - @echo $(MSG_DFU_CMD) Programming EEPROM with batchisp using \"$<.hex\" - batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $<.hex program - batchisp -hardware usb -device $(MCU) -operation start reset 0 - @echo $(MSG_REMOVE_CMD) Removing temporary file \"$<.hex\" - rm $<.hex - -# Programs in the target FLASH memory using DFU-PROGRAMMER -dfu: $(TARGET).hex $(MAKEFILE_LIST) - @echo $(MSG_DFU_CMD) Programming FLASH with dfu-programmer using \"$<\" - dfu-programmer $(MCU) erase - dfu-programmer $(MCU) flash $< - dfu-programmer $(MCU) reset - -# Programs in the target EEPROM memory using DFU-PROGRAMMER -dfu-ee: $(TARGET).eep $(MAKEFILE_LIST) - @echo $(MSG_DFU_CMD) Programming EEPROM with dfu-programmer using \"$<\" - dfu-programmer $(MCU) flash --eeprom $< - dfu-programmer $(MCU) reset - -# Phony build targets for this module -.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/doxygen.md b/lib/lufa/LUFA/Build/DMBS/DMBS/doxygen.md deleted file mode 100644 index 837704aca..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/doxygen.md +++ /dev/null @@ -1,118 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Module: DOXYGEN ------------------ - -The DOXYGEN module provides build targets to automatically generate API -documentation for a project, using the open-source Doxygen tool. - -## Importing This Module into a Makefile: - -To use this module in your application makefile, add the following code to your -makefile: - - include $(DMBS_PATH)/doxygen.mk - -## Prerequisites: - -This module requires the `doxygen` utility to be available in your system's -`PATH` variable. The `doxygen` utility is distributed on the project's -[official site](http://doxygen.org/) but is also -made available in many *nix operating system's package managers. - -## Build Targets: - -The following targets are supported by this module: - -<table> - <tbody> - <tr> - <td>doxygen</td> - <td>Generate project documentation, via Doxygen.</td> - </tr> - <tr> - <td>doxygen-create</td> - <td>Create a new project Doxygen template, which can then be customized.</td> - </tr> - <tr> - <td>doxygen-upgrade</td> - <td>Upgrade an existing project Doxygen template to the latest Doxygen version.</td> - </tr> - </tbody> -</table> - -## Mandatory Variables: - -The following variables must be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile to be able to use this module: - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module has no mandatory variables.</td> - </tr> - </tbody> -</table> - -## Optional Variables: - -The following variables may be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile. If not specified, a default value will -be assumed. - -<table> - <tbody> - <tr> - <td>DOXYGEN_CONF</td> - <td>Name of the Doxygen project configuration file that should be used when generating documentation, or creating/upgrading the configuration file.</td> - </tr> - <tr> - <td>DOXYGEN_FAIL_ON_WARNING</td> - <td>Boolean, if `Y` the build will fail if Doxygen encounters any errors or warnings. If `N`, fail only on errors. Default is `Y`.</td> - </tr> - <tr> - <td>DOXYGEN_OVERRIDE_PARAMS</td> - <td>List of `NAME=VALUE` parameters which should override the values specified in the project configuration file, when building documentation.</td> - </tr> - </tbody> -</table> - -## Provided Variables: - -The following variables may be referenced in a user makefile (via `$(NAME)` -syntax) if desired, as they are provided by this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no variables.</td> - </tr> - </tbody> -</table> - -## Provided Macros: - -The following macros may be referenced in a user makefile (via -`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by -this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no macros.</td> - </tr> - </tbody> -</table> - -## Module Changelog: - -The changes to this module since its initial release are listed below, as of the -DMBS version where the change was made. - -### 20160403 -Initial release. diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/doxygen.mk b/lib/lufa/LUFA/Build/DMBS/DMBS/doxygen.mk deleted file mode 100644 index 45639ad15..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/doxygen.mk +++ /dev/null @@ -1,62 +0,0 @@ -# -# DMBS Build System -# Released into the public domain. -# -# dean [at] fourwalledcubicle [dot] com -# www.fourwalledcubicle.com -# - -DMBS_BUILD_MODULES += DOXYGEN -DMBS_BUILD_TARGETS += doxygen doxygen-upgrade doxygen-create -DMBS_BUILD_MANDATORY_VARS += -DMBS_BUILD_OPTIONAL_VARS += DOXYGEN_CONF DOXYGEN_FAIL_ON_WARNING DOXYGEN_OVERRIDE_PARAMS -DMBS_BUILD_PROVIDED_VARS += -DMBS_BUILD_PROVIDED_MACROS += - -# Conditionally import the CORE module of DMBS if it is not already imported -DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) -ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) - include $(DMBS_MODULE_PATH)/core.mk -endif - -# Default values of optionally user-supplied variables -DOXYGEN_CONF ?= doxyfile -DOXYGEN_FAIL_ON_WARNING ?= Y -DOXYGEN_OVERRIDE_PARAMS ?= QUIET=YES - -# Sanity check user supplied values -$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) -$(call ERROR_IF_EMPTY, DOXYGEN_CONF) -$(call ERROR_IF_NONBOOL, DOXYGEN_FAIL_ON_WARNING) - -# Output Messages -MSG_DOXYGEN_CMD := ' [DOXYGEN] :' - -# Determine Doxygen invocation command -BASE_DOXYGEN_CMD := ( cat $(DOXYGEN_CONF) $(DOXYGEN_OVERRIDE_PARAMS:%=; echo "%") ) | doxygen - -ifeq ($(DOXYGEN_FAIL_ON_WARNING), Y) - DOXYGEN_CMD := if ( $(BASE_DOXYGEN_CMD) 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then exit 1; fi; -else - DOXYGEN_CMD := $(BASE_DOXYGEN_CMD) -endif - -# Error if the specified Doxygen configuration file does not exist -$(DOXYGEN_CONF): - $(error Doxygen configuration file $@ does not exist) - -# Builds the project documentation using the specified configuration file and the DOXYGEN tool -doxygen: $(DOXYGEN_CONF) $(MAKEFILE_LIST) - @echo $(MSG_DOXYGEN_CMD) Configuration file \"$(DOXYGEN_CONF)\" with parameters \"$(DOXYGEN_OVERRIDE_PARAMS)\" - $(DOXYGEN_CMD) - -# Upgrades an existing Doxygen configuration file to the latest Doxygen template, preserving settings -doxygen-upgrade: $(DOXYGEN_CONF) $(MAKEFILE_LIST) - @echo $(MSG_DOXYGEN_CMD) Upgrading configuration file \"$(DOXYGEN_CONF)\" with latest template - doxygen -u $(DOXYGEN_CONF) > /dev/null - -# Creates a new Doxygen configuration file with the set file name -doxygen-create: $(MAKEFILE_LIST) - @echo $(MSG_DOXYGEN_CMD) Creating new configuration file \"$(DOXYGEN_CONF)\" with latest template - doxygen -g $(DOXYGEN_CONF) > /dev/null - - diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/gcc.md b/lib/lufa/LUFA/Build/DMBS/DMBS/gcc.md deleted file mode 100644 index d28fd9ae4..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/gcc.md +++ /dev/null @@ -1,211 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Module: GCC ------------------ - -The GCC module provides build targets to compile a user application, using a -variant of GCC for a specific target architecture (such as `avr-gcc`). - -## Importing This Module into a Makefile: - -To use this module in your application makefile, add the following code to your -makefile: - - include $(DMBS_PATH)/gcc.mk - -## Prerequisites: - -This module requires the GCC compiler to be installed and available in the -system's `PATH` variable for the desired target architecture. - -## Build Targets: - -The following targets are supported by this module: - -<table> - <tbody> - <tr> - <td>size</td> - <td>Show the compiled binary size for the various memory segments.</td> - </tr> - <tr> - <td>symbol-sizes</td> - <td>Show the size of each symbol in the compiled binary (useful to find large functions to optimize further).</td> - </tr> - <tr> - <td>all</td> - <td>Build application and generate all binary (BIN, ELF, HEX) and auxiliary (LSS, MAP, SYM, etc.) output files.</td> - </tr> - <tr> - <td>lib</td> - <td>Generate a static `.a` library from the application code, containing the flash region's data.</td> - </tr> - <tr> - <td>elf</td> - <td>Generate an ELF debug file from the application code, containing all region's data.</td> - </tr> - <tr> - <td>bin</td> - <td>Generate a flat BIN binary file from the application code, containing the flash region's data.</td> - </tr> - <tr> - <td>hex</td> - <td>Generate a pair of Intel HEX files from the application code, containing the flash region's data (HEX) and EEPROM data (EEP).</td> - </tr> - <tr> - <td>lss</td> - <td>Generate a LSS listing file showing the disassembly of the compiled application.</td> - </tr> - <tr> - <td>clean</td> - <td>Remove all generated project intermediary and binary output files.</td> - </tr> - <tr> - <td>mostlyclean</td> - <td>Remove all generated project intermediary output files, but preserve the binary output files.</td> - </tr> - </tbody> -</table> - -## Mandatory Variables: - -The following variables must be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile to be able to use this module: - -<table> - <tbody> - <tr> - <td>MCU</td> - <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td> - </tr> - <tr> - <td>TARGET</td> - <td>Name of the application output file prefix (e.g. `TestApplication`).</td> - </tr> - <tr> - <td>ARCH</td> - <td>Target device architecture (e.g. `AVR8`).</td> - </tr> - <tr> - <td>SRC</td> - <td>List of all project source files (C, C++, ASM).</td> - </tr> - </tbody> -</table> - -## Optional Variables: - -The following variables may be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile. If not specified, a default value will -be assumed. - -<table> - <tbody> - <tr> - <td>COMPILER_PATH</td> - <td>Path to the compiler to use, in case a specific compiler should be substituted for the one in the system's `PATH` variable. Default is blank (use `PATH` provided compiler).</td> - </tr> - <tr> - <td>OPTIMIZATION</td> - <td>Optimization level to use when compiling C and C++ source files. Default is `s` (optimize for smallest size).</td> - </tr> - <tr> - <td>C_STANDARD</td> - <td>C language standard used when compiling C language source files. Default is `gnu99` (C99 standard with GNU extensions)./td> - </tr> - <tr> - <td>CPP_STANDARD</td> - <td>C++ language standard used when compiling C++ language source files. Default is `gnu++98` (C++98 standard with GNU extensions)./td> - </tr> - <tr> - <td>F_CPU</td> - <td>Processor core clock frequency, in Hz. This is used by some architectures for functions such as software spin-loop delays. Default is blank (no value defined).</td> - </tr> - <tr> - <td>C_FLAGS</td> - <td>Common GCC flags passed to the compiler for C language (C) input files. Default is blank (no additional flags).</td> - </tr> - <tr> - <td>CPP_FLAGS</td> - <td>Common GCC flags passed to the compiler for C++ language (CPP) input files. Default is blank (no additional flags).</td> - </tr> - <tr> - <td>ASM_FLAGS</td> - <td>Common GCC flags passed to the assembler for assembly language (S) input files. Default is blank (no additional flags).</td> - </tr> - <tr> - <td>CC_FLAGS</td> - <td>Common GCC flags passed to the compiler for all source file types. Default is blank (no additional flags).</td> - </tr> - <tr> - <td>LD_FLAGS</td> - <td>Extra flags to pass to the GNU linker when linking the compiled object files into the resulting binary. Default is blank (no additional flags).</td> - </tr> - <tr> - <td>LINKER_RELAXATIONS</td> - <td>Boolean, if `Y` linker relaxations will be enabled to slightly reduce the resulting binary's size. Default is `Y`.</td> - </tr> - <tr> - <td>JUMP_TABLES</td> - <td>Boolean, if `Y` jump tables will be enabled to slightly reduce the resulting binary's size - note that this can cause incorrect jumps if the binary is relocated after compilation, such as for a bootloader. Default is `N`.</td> - </tr> - <tr> - <td>OBJDIR</td> - <td>Directory to store the intermediate object files, as they are generated from the source files. Default is `obj`.</td> - </tr> - <tr> - <td>OBJECT_FILES</td> - <td>List of additional `.o` object files to link into the final binary. Default is blank (no additional objects).</td> - </tr> - <tr> - <td>DEBUG_FORMAT</td> - <td>Debug ELF file format to generate. Default is `dwarf-2`.</td> - </tr> - <tr> - <td>DEBUG_LEVEL</td> - <td>Level of the debugging information to generate in the compiled object files. Debug is 2 (medium level debugging information).</td> - </tr> - </tbody> -</table> - -## Provided Variables: - -The following variables may be referenced in a user makefile (via `$(NAME)` -syntax) if desired, as they are provided by this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no variables.</td> - </tr> - </tbody> -</table> - -## Provided Macros: - -The following macros may be referenced in a user makefile (via -`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by -this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no macros.</td> - </tr> - </tbody> -</table> - -## Module Changelog: - -The changes to this module since its initial release are listed below, as of the -DMBS version where the change was made. - -### 20170426 -Added `JUMP_TABLES` optional variable. - -### 20160403 -Initial release. diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/gcc.mk b/lib/lufa/LUFA/Build/DMBS/DMBS/gcc.mk deleted file mode 100644 index 6126cf97f..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/gcc.mk +++ /dev/null @@ -1,273 +0,0 @@ -# -# DMBS Build System -# Released into the public domain. -# -# dean [at] fourwalledcubicle [dot] com -# www.fourwalledcubicle.com -# - -DMBS_BUILD_MODULES += GCC -DMBS_BUILD_TARGETS += size symbol-sizes all lib elf bin hex lss clean mostlyclean -DMBS_BUILD_MANDATORY_VARS += TARGET ARCH MCU SRC -DMBS_BUILD_OPTIONAL_VARS += COMPILER_PATH OPTIMIZATION C_STANDARD CPP_STANDARD F_CPU C_FLAGS CPP_FLAGS ASM_FLAGS CC_FLAGS LD_FLAGS OBJDIR OBJECT_FILES DEBUG_TYPE DEBUG_LEVEL LINKER_RELAXATIONS JUMP_TABLES -DMBS_BUILD_PROVIDED_VARS += -DMBS_BUILD_PROVIDED_MACROS += - -# Conditionally import the CORE module of DMBS if it is not already imported -DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) -ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) - include $(DMBS_MODULE_PATH)/core.mk -endif - -# Default values of optionally user-supplied variables -COMPILER_PATH ?= -OPTIMIZATION ?= s -F_CPU ?= -C_STANDARD ?= gnu99 -CPP_STANDARD ?= gnu++98 -C_FLAGS ?= -CPP_FLAGS ?= -ASM_FLAGS ?= -CC_FLAGS ?= -OBJDIR ?= obj -OBJECT_FILES ?= -DEBUG_FORMAT ?= dwarf-2 -DEBUG_LEVEL ?= 2 -LINKER_RELAXATIONS ?= Y -JUMP_TABLES ?= N - -# Sanity check user supplied values -$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) -$(call ERROR_IF_EMPTY, MCU) -$(call ERROR_IF_EMPTY, TARGET) -$(call ERROR_IF_EMPTY, ARCH) -$(call ERROR_IF_EMPTY, OPTIMIZATION) -$(call ERROR_IF_EMPTY, C_STANDARD) -$(call ERROR_IF_EMPTY, CPP_STANDARD) -$(call ERROR_IF_EMPTY, OBJDIR) -$(call ERROR_IF_EMPTY, DEBUG_FORMAT) -$(call ERROR_IF_EMPTY, DEBUG_LEVEL) -$(call ERROR_IF_NONBOOL, LINKER_RELAXATIONS) -$(call ERROR_IF_NONBOOL, JUMP_TABLES) - -# Determine the utility prefix to use for the selected architecture -ifeq ($(ARCH), AVR8) - CROSS := $(COMPILER_PATH)avr -else ifeq ($(ARCH), XMEGA) - CROSS := $(COMPILER_PATH)avr -else ifeq ($(ARCH), UC3) - CROSS := $(COMPILER_PATH)avr32 -else - $(error Unsupported architecture "$(ARCH)") -endif - -# Output Messages -MSG_INFO_MESSAGE := ' [INFO] :' -MSG_COMPILE_CMD := ' [GCC] :' -MSG_ASSEMBLE_CMD := ' [GAS] :' -MSG_NM_CMD := ' [NM] :' -MSG_REMOVE_CMD := ' [RM] :' -MSG_LINK_CMD := ' [LNK] :' -MSG_ARCHIVE_CMD := ' [AR] :' -MSG_SIZE_CMD := ' [SIZE] :' -MSG_OBJCPY_CMD := ' [OBJCPY] :' -MSG_OBJDMP_CMD := ' [OBJDMP] :' - -# Convert input source file list to differentiate them by type -C_SOURCE := $(filter %.c, $(SRC)) -CPP_SOURCE := $(filter %.cpp, $(SRC)) -ASM_SOURCE := $(filter %.S, $(SRC)) - -# Create a list of unknown source file types, if any are found throw an error -UNKNOWN_SOURCE := $(filter-out $(C_SOURCE) $(CPP_SOURCE) $(ASM_SOURCE), $(SRC)) -ifneq ($(UNKNOWN_SOURCE),) - $(error Unknown input source file formats: $(UNKNOWN_SOURCE)) -endif - -# Convert input source filenames into a list of required output object files -OBJECT_FILES += $(addsuffix .o, $(basename $(SRC))) - -# Check if an output object file directory was specified instead of the input file location -ifneq ($(OBJDIR),.) - # Prefix all the object filenames with the output object file directory path - OBJECT_FILES := $(addprefix $(patsubst %/,%,$(OBJDIR))/, $(notdir $(OBJECT_FILES))) - - # Check if any object file (without path) appears more than once in the object file list - ifneq ($(words $(sort $(OBJECT_FILES))), $(words $(OBJECT_FILES))) - $(error Cannot build with OBJDIR parameter set - one or more object file name is not unique) - endif - - # Create the output object file directory if it does not exist and add it to the virtual path list - $(shell mkdir -p $(OBJDIR) 2> /dev/null) - VPATH += $(dir $(SRC)) -endif - -# Create a list of dependency files from the list of object files -DEPENDENCY_FILES := $(OBJECT_FILES:%.o=%.d) - -# Create a list of common flags to pass to the compiler/linker/assembler -BASE_CC_FLAGS := -pipe -g$(DEBUG_FORMAT) -g$(DEBUG_LEVEL) -ifneq ($(findstring $(ARCH), AVR8 XMEGA),) - BASE_CC_FLAGS += -mmcu=$(MCU) -fshort-enums -fno-inline-small-functions -fpack-struct -else ifneq ($(findstring $(ARCH), UC3),) - BASE_CC_FLAGS += -mpart=$(MCU:at32%=%) -masm-addr-pseudos -endif -BASE_CC_FLAGS += -Wall -fno-strict-aliasing -funsigned-char -funsigned-bitfields -ffunction-sections -BASE_CC_FLAGS += -I. -BASE_CC_FLAGS += -DARCH=ARCH_$(ARCH) -ifneq ($(F_CPU),) - BASE_CC_FLAGS += -DF_CPU=$(F_CPU)UL -endif -ifeq ($(LINKER_RELAXATIONS), Y) - BASE_CC_FLAGS += -mrelax -endif -ifeq ($(JUMP_TABLES), N) - # This flag is required for bootloaders as GCC will emit invalid jump table - # assembly code for devices with large amounts of flash; the jump table target - # is extracted from FLASH without using the correct ELPM instruction, resulting - # in a pseudo-random jump target. - BASE_CC_FLAGS += -fno-jump-tables -endif - -# Additional language specific compiler flags -BASE_C_FLAGS := -x c -O$(OPTIMIZATION) -std=$(C_STANDARD) -Wstrict-prototypes -BASE_CPP_FLAGS := -x c++ -O$(OPTIMIZATION) -std=$(CPP_STANDARD) -BASE_ASM_FLAGS := -x assembler-with-cpp - -# Create a list of flags to pass to the linker -BASE_LD_FLAGS := -lm -Wl,-Map=$(TARGET).map,--cref -Wl,--gc-sections -ifeq ($(LINKER_RELAXATIONS), Y) - BASE_LD_FLAGS += -Wl,--relax -endif -ifneq ($(findstring $(ARCH), AVR8 XMEGA),) - BASE_LD_FLAGS += -mmcu=$(MCU) -else ifneq ($(findstring $(ARCH), UC3),) - BASE_LD_FLAGS += -mpart=$(MCU:at32%=%) --rodata-writable --direct-data -endif - -# Determine flags to pass to the size utility based on its reported features (only invoke if size target required) -# and on an architecture where this non-standard patch is available -ifneq ($(ARCH), UC3) -size: SIZE_MCU_FLAG := $(shell $(CROSS)-size --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) ) -size: SIZE_FORMAT_FLAG := $(shell $(CROSS)-size --help | grep -- --format=.*avr > /dev/null && echo --format=avr ) -endif - -# Pre-build informational target, to give compiler and project name information when building -build_begin: - @echo $(MSG_INFO_MESSAGE) Begin compilation of project \"$(TARGET)\"... - @echo "" - @$(CROSS)-gcc --version - -# Post-build informational target, to project name information when building has completed -build_end: - @echo $(MSG_INFO_MESSAGE) Finished building project \"$(TARGET)\". - -# Prints size information of a compiled application (FLASH, RAM and EEPROM usages) -size: $(TARGET).elf - @echo $(MSG_SIZE_CMD) Determining size of \"$<\" - @echo "" - $(CROSS)-size $(SIZE_MCU_FLAG) $(SIZE_FORMAT_FLAG) $< - -# Prints size information on the symbols within a compiled application in decimal bytes -symbol-sizes: $(TARGET).elf - @echo $(MSG_NM_CMD) Extracting \"$<\" symbols with decimal byte sizes - $(CROSS)-nm --size-sort --demangle --radix=d $< - -# Cleans intermediary build files, leaving only the compiled application files -mostlyclean: - @echo $(MSG_REMOVE_CMD) Removing object files of \"$(TARGET)\" - rm -f $(OBJECT_FILES) - @echo $(MSG_REMOVE_CMD) Removing dependency files of \"$(TARGET)\" - rm -f $(DEPENDENCY_FILES) - -# Cleans all build files, leaving only the original source code -clean: mostlyclean - @echo $(MSG_REMOVE_CMD) Removing output files of \"$(TARGET)\" - rm -f $(TARGET).elf $(TARGET).hex $(TARGET).bin $(TARGET).eep $(TARGET).map $(TARGET).lss $(TARGET).sym lib$(TARGET).a - -# Performs a complete build of the user application and prints size information afterwards -all: build_begin elf hex bin lss sym size build_end - -# Helper targets, to build a specific type of output file without having to know the project target name -lib: lib$(TARGET).a -elf: $(TARGET).elf -hex: $(TARGET).hex $(TARGET).eep -bin: $(TARGET).bin -lss: $(TARGET).lss -sym: $(TARGET).sym - -# Default target to *create* the user application's specified source files; if this rule is executed by -# make, the input source file doesn't exist and an error needs to be presented to the user -$(SRC): - $(error Source file does not exist: $@) - -# Compiles an input C source file and generates an assembly listing for it -%.s: %.c $(MAKEFILE_LIST) - @echo $(MSG_COMPILE_CMD) Generating assembly from C file \"$(notdir $<)\" - $(CROSS)-gcc -S $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) $< -o $@ - -# Compiles an input C++ source file and generates an assembly listing for it -%.s: %.cpp $(MAKEFILE_LIST) - @echo $(MSG_COMPILE_CMD) Generating assembly from C++ file \"$(notdir $<)\" - $(CROSS)-gcc -S $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) $< -o $@ - -# Compiles an input C source file and generates a linkable object file for it -$(OBJDIR)/%.o: %.c $(MAKEFILE_LIST) - @echo $(MSG_COMPILE_CMD) Compiling C file \"$(notdir $<)\" - $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@ - -# Compiles an input C++ source file and generates a linkable object file for it -$(OBJDIR)/%.o: %.cpp $(MAKEFILE_LIST) - @echo $(MSG_COMPILE_CMD) Compiling C++ file \"$(notdir $<)\" - $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@ - -# Assembles an input ASM source file and generates a linkable object file for it -$(OBJDIR)/%.o: %.S $(MAKEFILE_LIST) - @echo $(MSG_ASSEMBLE_CMD) Assembling \"$(notdir $<)\" - $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_ASM_FLAGS) $(CC_FLAGS) $(ASM_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@ - -# Generates a library archive file from the user application, which can be linked into other applications -.PRECIOUS : $(OBJECT_FILES) -.SECONDARY : %.a -%.a: $(OBJECT_FILES) - @echo $(MSG_ARCHIVE_CMD) Archiving object files into \"$@\" - $(CROSS)-ar rcs $@ $(OBJECT_FILES) - -# Generates an ELF debug file from the user application, which can be further processed for FLASH and EEPROM data -# files, or used for programming and debugging directly -.PRECIOUS : $(OBJECT_FILES) -.SECONDARY : %.elf -%.elf: $(OBJECT_FILES) - @echo $(MSG_LINK_CMD) Linking object files into \"$@\" - $(CROSS)-gcc $^ -o $@ $(BASE_LD_FLAGS) $(LD_FLAGS) - -# Extracts out the loadable FLASH memory data from the project ELF file, and creates an Intel HEX format file of it -%.hex: %.elf - @echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$<\" - $(CROSS)-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature $< $@ - -# Extracts out the loadable FLASH memory data from the project ELF file, and creates an Binary format file of it -%.bin: %.elf - @echo $(MSG_OBJCPY_CMD) Extracting BIN file data from \"$<\" - $(CROSS)-objcopy -O binary -R .eeprom -R .fuse -R .lock -R .signature $< $@ - -# Extracts out the loadable EEPROM memory data from the project ELF file, and creates an Intel HEX format file of it -%.eep: %.elf - @echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$<\" - $(CROSS)-objcopy -O ihex -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings $< $@ || exit 0 - -# Creates an assembly listing file from an input project ELF file, containing interleaved assembly and source data -%.lss: %.elf - @echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$<\" - $(CROSS)-objdump -h -d -S -z $< > $@ - -# Creates a symbol file listing the loadable and discarded symbols from an input project ELF file -%.sym: %.elf - @echo $(MSG_NM_CMD) Extracting SYM file data from \"$<\" - $(CROSS)-nm -n $< > $@ - -# Include build dependency files --include $(DEPENDENCY_FILES) - -# Phony build targets for this module -.PHONY: build_begin build_end $(DMBS_BUILD_TARGETS) diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/hid.md b/lib/lufa/LUFA/Build/DMBS/DMBS/hid.md deleted file mode 100644 index b2dfbf713..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/hid.md +++ /dev/null @@ -1,129 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Module: HID ------------------ - -The HID module provides build targets to program a target running a PJRC Teensy -or LUFA compatible HID class bootloader. - -## Importing This Module into a Makefile: - -To use this module in your application makefile, add the following code to your -makefile: - - include $(DMBS_PATH)/hid.mk - -## Prerequisites: - -This module requires the `teensy_loader_cli` utility to be available in your -system's `PATH` variable. The `teensy_loader_cli` utility is distributed in -a modified form (from PJRC) in the LUFA project's -[official site](http://www.lufa-lib.org/), but is also -made available in its original form directly from the -[PJRC website](https://www.pjrc.com/teensy/loader_cli.html). Note that the -original tool works with Teensy boards only, and not LUFA HID bootloader -devices. - -This module requires the `hid_bootloader_cli` utility to be available in your -system's `PATH` variable. The `hid_bootloader_cli` Python script utility is -distributed in LUFA project's [official site](http://www.lufa-lib.org/). - -This module requires the AVR-GCC compiler to be installed and available in the -system's `PATH` variable. - -## Build Targets: - -The following targets are supported by this module: - -<table> - <tbody> - <tr> - <td>hid</td> - <td>Program a LUFA HID class bootloader device, using the `hid_bootloader_cli.py` Python script.</td> - </tr> - <tr> - <td>hid-ee</td> - <td>Program a LUFA HID class bootloader device's EEPROM, using the `hid_bootloader_cli.py` Python script and a shim application which is programmed into the target's flash.</td> - </tr> - <tr> - <td>teensy</td> - <td>Program a LUFA HID class bootloader device or Teensy board, using the `teensy_loader_cli` tool.</td> - </tr> - <tr> - <td>teensy-ee</td> - <td>Program a LUFA HID class bootloader device's EEPROM, using the `teensy_loader_cli` tool and a shim application which is programmed into the target's flash.</td> - </tr> - </tbody> -</table> - -## Mandatory Variables: - -The following variables must be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile to be able to use this module: - -<table> - <tbody> - <tr> - <td>MCU</td> - <td>Name of the Atmel processor model (e.g. `at90usb1287`).</td> - </tr> - <tr> - <td>TARGET</td> - <td>Name of the application output file prefix (e.g. `TestApplication`).</td> - </tr> - </tbody> -</table> - -## Optional Variables: - -The following variables may be defined (with a `NAME = VALUE` syntax, one -variable per line) in the user makefile. If not specified, a default value will -be assumed. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module has no optional variables.</td> - </tr> - </tbody> -</table> - -## Provided Variables: - -The following variables may be referenced in a user makefile (via `$(NAME)` -syntax) if desired, as they are provided by this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no variables.</td> - </tr> - </tbody> -</table> - -## Provided Macros: - -The following macros may be referenced in a user makefile (via -`$(call NAME, ARG1, ARG2, ...)` syntax) if desired, as they are provided by -this module. - -<table> - <tbody> - <tr> - <td>N/A</td> - <td>This module provides no macros.</td> - </tr> - </tbody> -</table> - -## Module Changelog: - -The changes to this module since its initial release are listed below, as of the -DMBS version where the change was made. - -### 20160403 -Initial release. diff --git a/lib/lufa/LUFA/Build/DMBS/DMBS/hid.mk b/lib/lufa/LUFA/Build/DMBS/DMBS/hid.mk deleted file mode 100644 index 7a0ad9d0e..000000000 --- a/lib/lufa/LUFA/Build/DMBS/DMBS/hid.mk +++ /dev/null @@ -1,57 +0,0 @@ -# -# DMBS Build System -# Released into the public domain. -# -# dean [at] fourwalledcubicle [dot] com -# www.fourwalledcubicle.com -# - -DMBS_BUILD_MODULES += HID -DMBS_BUILD_TARGETS += hid hid-ee teensy teensy-ee -DMBS_BUILD_MANDATORY_VARS += MCU TARGET -DMBS_BUILD_OPTIONAL_VARS += -DMBS_BUILD_PROVIDED_VARS += -DMBS_BUILD_PROVIDED_MACROS += - -# Conditionally import the CORE module of DMBS if it is not already imported -DMBS_MODULE_PATH := $(patsubst %/,%,$(dir $(lastword $(MAKEFILE_LIST)))) -ifeq ($(findstring CORE, $(DMBS_BUILD_MODULES)),) - include $(DMBS_MODULE_PATH)/core.mk -endif - -# Sanity-check values of mandatory user-supplied variables -$(foreach MANDATORY_VAR, $(DMBS_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR))) -$(call ERROR_IF_EMPTY, MCU) -$(call ERROR_IF_EMPTY, TARGET) - -# Output Messages -MSG_HID_BOOTLOADER_CMD := ' [HID] :' -MSG_OBJCPY_CMD := ' [OBJCPY] :' -MSG_MAKE_CMD := ' [MAKE] :' - -# Programs in the target FLASH memory using the HID_BOOTLOADER_CLI tool -hid: $(TARGET).hex $(MAKEFILE_LIST) - @echo $(MSG_HID_BOOTLOADER_CMD) Programming FLASH with hid_bootloader_cli using \"$<\" - hid_bootloader_cli -mmcu=$(MCU) -v $< - -# Programs in the target EEPROM memory using the HID_BOOTLOADER_CLI tool (note: clears target FLASH memory) -hid-ee: $(TARGET).eep $(MAKEFILE_LIST) - @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a binary file \"InputEEData.bin\" - avr-objcopy -I ihex -O binary $< $(DMBS_MODULE_PATH)/HID_EEPROM_Loader/InputEEData.bin - @echo $(MSG_MAKE_CMD) Making EEPROM loader application for \"$<\" - $(MAKE) -C $(DMBS_MODULE_PATH)/HID_EEPROM_Loader/ MCU=$(MCU) clean hid - -# Programs in the target FLASH memory using the TEENSY_BOOTLOADER_CLI tool -teensy: $(TARGET).hex $(MAKEFILE_LIST) - @echo $(MSG_HID_BOOTLOADER_CMD) Programming FLASH with teensy_loader_cli using \"$<\" - teensy_loader_cli -mmcu=$(MCU) -v $< - -# Programs in the target EEPROM memory using the TEENSY_BOOTLOADER_CLI tool (note: clears target FLASH memory) -teensy-ee: $(TARGET).hex $(MAKEFILE_LIST) - @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a binary file \"InputEEData.bin\" - avr-objcopy -I ihex -O binary $< $(DMBS_MODULE_PATH)/HID_EEPROM_Loader/InputEEData.bin - @echo $(MSG_MAKE_CMD) Making EEPROM loader application for \"$<\" - $(MAKE) -s -C $(DMBS_MODULE_PATH)/HID_EEPROM_Loader/ MCU=$(MCU) clean teensy - -# Phony build targets for this module -.PHONY: $(DMBS_BUILD_TARGETS) diff --git a/lib/lufa/LUFA/Build/DMBS/Readme.md b/lib/lufa/LUFA/Build/DMBS/Readme.md deleted file mode 100644 index f4f7a5f15..000000000 --- a/lib/lufa/LUFA/Build/DMBS/Readme.md +++ /dev/null @@ -1,123 +0,0 @@ -DMBS - Dean's Makefile Build System -=================================== - - -Project Overview ----------------- - -GNU Make is scary, and it's tough to get the rules right sometimes. Many -projects get by via simple copy-pasting of old makefiles, resulting in many -redundant copies of the same old rules. DMBS aims to solve this by providing a -simple modular set of makefiles which can be included by your project to quickly -add various build functionality. - -This aims to replace the old WinAVR "mfile" makefile template, giving better -functionality and much simpler user makefiles. - - -Benefits: ----------------- - -Apart from much simpler, cleaner makefiles DMBS carries the aim of making the -process of troubleshooting build issues a little easier. Lots can go wrong, so -DMBS tries to sanity check its inputs wherever possible, and produce -human-readable error messages. Forgotten to set a variable? Get a -`Makefile {X} value not set.` message, rather than a possibly unrelated message. -Have the wrong filename? See `Source file does not exist: {X}` rather than the -infamous `No rule to make target {X}` message. - - -Use: ----------------- - -A template user makefile is provided in the `Template` directory. DMBS modules -are included via a GNU Make `include` directive. While the DMBS `core` module is -always required, you can pick and choose what other modules you wish to add to -your user project. - -[See here for the documentation on the individual modules provided by DMBS.](DMBS/ModulesOverview.md) -If you're interested in writing your own DMBS module(s), [see here.](DMBS/WritingYourOwnModules.md) - -Here's an example user makefile: - - MCU = atmega128 - ARCH = AVR8 - F_CPU = 8000000 - OPTIMIZATION = s - TARGET = Template - SRC = $(TARGET).c - CC_FLAGS = - LD_FLAGS = - - # Default target - all: - - # Include DMBS build script makefiles - DMBS_PATH ?= ../DMBS - include $(DMBS_PATH)/core.mk - include $(DMBS_PATH)/gcc.mk - include $(DMBS_PATH)/cppcheck.mk - include $(DMBS_PATH)/doxygen.mk - include $(DMBS_PATH)/dfu.mk - include $(DMBS_PATH)/hid.mk - include $(DMBS_PATH)/avrdude.mk - include $(DMBS_PATH)/atprogram.mk - -Each DMBS module can optionally supply one or more Make variables and macros, -which you can reference in your user makefile. Additionally, modules can require -one or more variables to be set by the user makefile, with (in some cases) sane -defaults used if left out. - -As modules are added, you can get a list of available targets by simply typing -`make help` from the command line. This will produce a formatted list of targets -as well as mandatory and optional variables and exposed variables and macros. - - -Distribution ----------------- - -You can embed DMBS in your project any way you like - some options are: -1. A git submodule -2. A source tarball -3. A manually copied extracted archive - -The intention of DMBS is that users can just import it from whatever source -they like. If your project needs to extend the existing modules in an unusual -manner, or if you want to provide your own modules, you can include them in -your project repository (or submit a patch to DMBS if your module is generic -enough to warrant wide use). - - -License ----------------- - -DMBS is released into the public domain, making is suitable for use everywhere, -by everyone. Contributions are greatly appreciated however, in order to make -DMBS better for everyone. - -The actual license text is as follows: - - This is free and unencumbered software released into the public domain. - - Anyone is free to copy, modify, publish, use, compile, sell, or - distribute this software, either in source code form or as a compiled - binary, for any purpose, commercial or non-commercial, and by any - means. - - In jurisdictions that recognize copyright laws, the author or authors - of this software dedicate any and all copyright interest in the - software to the public domain. We make this dedication for the benefit - of the public at large and to the detriment of our heirs and - successors. We intend this dedication to be an overt act of - relinquishment in perpetuity of all present and future rights to this - software under copyright law. - - THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF - MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. - IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR - OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, - ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - OTHER DEALINGS IN THE SOFTWARE. - - For more information, please refer to <http://unlicense.org/> diff --git a/lib/lufa/LUFA/Build/DMBS/Template/Template.c b/lib/lufa/LUFA/Build/DMBS/Template/Template.c deleted file mode 100644 index 95d36f7db..000000000 --- a/lib/lufa/LUFA/Build/DMBS/Template/Template.c +++ /dev/null @@ -1,12 +0,0 @@ -/* - DMBS Build System - Released into the public domain. - - dean [at] fourwalledcubicle [dot] com - www.fourwalledcubicle.com - */ - -int main(void) -{ - // Application code here. -} diff --git a/lib/lufa/LUFA/Build/DMBS/Template/makefile b/lib/lufa/LUFA/Build/DMBS/Template/makefile deleted file mode 100644 index d88292388..000000000 --- a/lib/lufa/LUFA/Build/DMBS/Template/makefile +++ /dev/null @@ -1,32 +0,0 @@ -# -# DMBS Build System -# Released into the public domain. -# -# dean [at] fourwalledcubicle [dot] com -# www.fourwalledcubicle.com -# - -# Run "make help" for target help. - -MCU = atmega128 -ARCH = AVR8 -F_CPU = 8000000 -OPTIMIZATION = s -TARGET = Template -SRC = $(TARGET).c -CC_FLAGS = -LD_FLAGS = - -# Default target -all: - -# Include DMBS build script makefiles -DMBS_PATH ?= ../DMBS -include $(DMBS_PATH)/core.mk -include $(DMBS_PATH)/gcc.mk -include $(DMBS_PATH)/cppcheck.mk -include $(DMBS_PATH)/doxygen.mk -include $(DMBS_PATH)/dfu.mk -include $(DMBS_PATH)/hid.mk -include $(DMBS_PATH)/avrdude.mk -include $(DMBS_PATH)/atprogram.mk |