diff options
Diffstat (limited to 'lib/lufa/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h')
| -rw-r--r-- | lib/lufa/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h | 271 |
1 files changed, 0 insertions, 271 deletions
diff --git a/lib/lufa/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h b/lib/lufa/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h deleted file mode 100644 index b3e7ee36a..000000000 --- a/lib/lufa/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h +++ /dev/null @@ -1,271 +0,0 @@ -/* - LUFA Library - Copyright (C) Dean Camera, 2017. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2017 Dean Camera (dean [at] fourwalledcubicle [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaims all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * \brief Serial USART Peripheral Driver (AVR8) - * - * On-chip serial USART driver for the 8-bit AVR microcontrollers. - * - * \note This file should not be included directly. It is automatically included as needed by the USART driver - * dispatch header located in LUFA/Drivers/Peripheral/Serial.h. - */ - -/** \ingroup Group_Serial - * \defgroup Group_Serial_AVR8 Serial USART Peripheral Driver (AVR8) - * - * \section Sec_Serial_AVR8_ModDescription Module Description - * On-chip serial USART driver for the 8-bit AVR microcontrollers. - * - * \note This file should not be included directly. It is automatically included as needed by the USART driver - * dispatch header located in LUFA/Drivers/Peripheral/Serial.h. - * - * \section Sec_Serial_AVR8_ExampleUsage Example Usage - * The following snippet is an example of how this module may be used within a typical - * application. - * - * \code - * // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode) - * Serial_Init(9600, false); - * - * // Send a string through the USART - * Serial_SendString("Test String\r\n"); - * - * // Send a raw byte through the USART - * Serial_SendByte(0xDC); - * - * // Receive a byte through the USART (or -1 if no data received) - * int16_t DataByte = Serial_ReceiveByte(); - * \endcode - * - * @{ - */ - -#ifndef __SERIAL_AVR8_H__ -#define __SERIAL_AVR8_H__ - - /* Includes: */ - #include "../../../Common/Common.h" - #include "../../Misc/TerminalCodes.h" - - #include <stdio.h> - - /* Enable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - extern "C" { - #endif - - /* Preprocessor Checks: */ - #if !defined(__INCLUDE_FROM_SERIAL_H) && !defined(__INCLUDE_FROM_SERIAL_C) - #error Do not include this file directly. Include LUFA/Drivers/Peripheral/Serial.h instead. - #endif - - /* Private Interface - For use in library only: */ - #if !defined(__DOXYGEN__) - /* External Variables: */ - extern FILE USARTSerialStream; - - /* Function Prototypes: */ - int Serial_putchar(char DataByte, - FILE *Stream); - int Serial_getchar(FILE *Stream); - int Serial_getchar_Blocking(FILE *Stream); - #endif - - /* Public Interface - May be used in end-application: */ - /* Macros: */ - /** Macro for calculating the baud value from a given baud rate when the \c U2X (double speed) bit is - * not set. - * - * \param[in] Baud Target serial UART baud rate. - * - * \return Closest UBRR register value for the given UART frequency. - */ - #define SERIAL_UBBRVAL(Baud) ((((F_CPU / 16) + (Baud / 2)) / (Baud)) - 1) - - /** Macro for calculating the baud value from a given baud rate when the \c U2X (double speed) bit is - * set. - * - * \param[in] Baud Target serial UART baud rate. - * - * \return Closest UBRR register value for the given UART frequency. - */ - #define SERIAL_2X_UBBRVAL(Baud) ((((F_CPU / 8) + (Baud / 2)) / (Baud)) - 1) - - /* Function Prototypes: */ - /** Transmits a given NUL terminated string located in program space (FLASH) through the USART. - * - * \param[in] FlashStringPtr Pointer to a string located in program space. - */ - void Serial_SendString_P(const char* FlashStringPtr) ATTR_NON_NULL_PTR_ARG(1); - - /** Transmits a given NUL terminated string located in SRAM memory through the USART. - * - * \param[in] StringPtr Pointer to a string located in SRAM space. - */ - void Serial_SendString(const char* StringPtr) ATTR_NON_NULL_PTR_ARG(1); - - /** Transmits a given buffer located in SRAM memory through the USART. - * - * \param[in] Buffer Pointer to a buffer containing the data to send. - * \param[in] Length Length of the data to send, in bytes. - */ - void Serial_SendData(const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1); - - /** Creates a standard character stream from the USART so that it can be used with all the regular functions - * in the avr-libc \c <stdio.h> library that accept a \c FILE stream as a destination (e.g. \c fprintf). The created - * stream is bidirectional and can be used for both input and output functions. - * - * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single - * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may - * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own - * line buffering. - * - * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed, if \c NULL, \c stdout - * and \c stdin will be configured to use the USART. - * - * \pre The USART must first be configured via a call to \ref Serial_Init() before the stream is used. - */ - void Serial_CreateStream(FILE* Stream); - - /** Identical to \ref Serial_CreateStream(), except that reads are blocking until the calling stream function terminates - * the transfer. - * - * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed, if \c NULL, \c stdout - * and \c stdin will be configured to use the USART. - * - * \pre The USART must first be configured via a call to \ref Serial_Init() before the stream is used. - */ - void Serial_CreateBlockingStream(FILE* Stream); - - /* Inline Functions: */ - /** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to - * standard 8-bit, no parity, 1 stop bit settings suitable for most applications. - * - * \param[in] BaudRate Serial baud rate, in bits per second. This should be the target baud rate regardless of the - * \c DoubleSpeed parameter's value. - * \param[in] DoubleSpeed Enables double speed mode when set, halving the sample time to double the baud rate. - */ - static inline void Serial_Init(const uint32_t BaudRate, - const bool DoubleSpeed); - static inline void Serial_Init(const uint32_t BaudRate, - const bool DoubleSpeed) - { - UBRR1 = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate)); - - UCSR1C = ((1 << UCSZ11) | (1 << UCSZ10)); - UCSR1A = (DoubleSpeed ? (1 << U2X1) : 0); - UCSR1B = ((1 << TXEN1) | (1 << RXEN1)); - - DDRD |= (1 << 3); - PORTD |= (1 << 2); - } - - /** Turns off the USART driver, disabling and returning used hardware to their default configuration. */ - static inline void Serial_Disable(void); - static inline void Serial_Disable(void) - { - UCSR1B = 0; - UCSR1A = 0; - UCSR1C = 0; - - UBRR1 = 0; - - DDRD &= ~(1 << 3); - PORTD &= ~(1 << 2); - } - - /** Indicates whether a character has been received through the USART. - * - * \return Boolean \c true if a character has been received, \c false otherwise. - */ - static inline bool Serial_IsCharReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Serial_IsCharReceived(void) - { - return ((UCSR1A & (1 << RXC1)) ? true : false); - } - - /** Indicates whether there is hardware buffer space for a new transmit on the USART. This - * function can be used to determine if a call to \ref Serial_SendByte() will block in advance. - * - * \return Boolean \c true if a character can be queued for transmission immediately, \c false otherwise. - */ - static inline bool Serial_IsSendReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Serial_IsSendReady(void) - { - return ((UCSR1A & (1 << UDRE1)) ? true : false); - } - - /** Indicates whether the hardware USART transmit buffer is completely empty, indicating all - * pending transmissions have completed. - * - * \return Boolean \c true if no characters are buffered for transmission, \c false otherwise. - */ - static inline bool Serial_IsSendComplete(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Serial_IsSendComplete(void) - { - return ((UCSR1A & (1 << TXC1)) ? true : false); - } - - /** Transmits a given byte through the USART. - * - * \note If no buffer space is available in the hardware USART, this function will block. To check if - * space is available before calling this function, see \ref Serial_IsSendReady(). - * - * \param[in] DataByte Byte to transmit through the USART. - */ - static inline void Serial_SendByte(const char DataByte) ATTR_ALWAYS_INLINE; - static inline void Serial_SendByte(const char DataByte) - { - while (!(Serial_IsSendReady())); - UDR1 = DataByte; - } - - /** Receives the next byte from the USART. - * - * \return Next byte received from the USART, or a negative value if no byte has been received. - */ - static inline int16_t Serial_ReceiveByte(void) ATTR_ALWAYS_INLINE; - static inline int16_t Serial_ReceiveByte(void) - { - if (!(Serial_IsCharReceived())) - return -1; - - return UDR1; - } - - /* Disable C linkage for C++ Compilers: */ - #if defined(__cplusplus) - } - #endif - -#endif - -/** @} */ - |