diff options
Diffstat (limited to 'protocol/lufa')
311 files changed, 0 insertions, 65510 deletions
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/HID_EEPROM_Loader/HID_EEPROM_Loader.c b/protocol/lufa/LUFA-120730/LUFA/Build/HID_EEPROM_Loader/HID_EEPROM_Loader.c deleted file mode 100644 index 600469fa1..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/HID_EEPROM_Loader/HID_EEPROM_Loader.c +++ /dev/null @@ -1,61 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Special application to extract an EEPROM image stored in FLASH memory, and
- * copy it to the device EEPROM. This application is designed to be used with
- * the HID build system module of LUFA to program the EEPROM of a target device
- * that uses the HID bootloader protocol, which does not have native EEPROM
- * programming support.
- */
-
-#include <avr/io.h>
-#include <avr/eeprom.h>
-#include <avr/pgmspace.h>
-
-/* References to the binary EEPROM data linked in the AVR's FLASH memory space */
-extern const char _binary_InputEEData_bin_start[];
-extern const char _binary_InputEEData_bin_end[];
-extern const char _binary_InputEEData_bin_size[];
-
-/* Friendly names for the embedded binary data stored in FLASH memory space */
-#define InputEEData _binary_InputEEData_bin_start
-#define InputEEData_size ((int)_binary_InputEEData_bin_size)
-
-int main(void)
-{
- /* Copy out the embedded EEPROM data from FLASH to EEPROM memory space */
- for (uint16_t i = 0; i < InputEEData_size; i++)
- eeprom_update_byte((uint8_t*)i, pgm_read_byte(&InputEEData[i]));
-
- /* Infinite loop once complete */
- for (;;);
-}
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/HID_EEPROM_Loader/makefile b/protocol/lufa/LUFA-120730/LUFA/Build/HID_EEPROM_Loader/makefile deleted file mode 100644 index f6dcbea67..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/HID_EEPROM_Loader/makefile +++ /dev/null @@ -1,40 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-# --------------------------------------
-# LUFA Project Makefile.
-# --------------------------------------
-
-MCU = at90usb1287
-ARCH = AVR8
-F_CPU = 1000000
-F_USB = $(F_CPU)
-OPTIMIZATION = s
-TARGET = HID_EEPROM_Loader
-SRC = $(TARGET).c
-LUFA_PATH = ../../../LUFA
-CC_FLAGS =
-LD_FLAGS =
-OBJECT_FILES = InputEEData.o
-
-# Default target
-all:
-
-# Determine the AVR sub-architecture of the build main application object file
-FIND_AVR_SUBARCH = avr$(shell avr-objdump -f $(TARGET).o | grep architecture | cut -d':' -f3 | cut -d',' -f1)
-
-# Create a linkable object file with the input binary EEPROM data stored in the FLASH section
-InputEEData.o: InputEEData.bin $(TARGET).o $(MAKEFILE_LIST)
- @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a object file \"$@\"
- avr-objcopy -I binary -O elf32-avr -B $(call FIND_AVR_SUBARCH) --rename-section .data=.progmem.data,contents,alloc,readonly,data $< $@
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_atprogram.mk b/protocol/lufa/LUFA-120730/LUFA/Build/lufa_atprogram.mk deleted file mode 100644 index 4e15e3997..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_atprogram.mk +++ /dev/null @@ -1,101 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += ATPROGRAM
-LUFA_BUILD_TARGETS += atprogram atprogram-ee
-LUFA_BUILD_MANDATORY_VARS += MCU TARGET
-LUFA_BUILD_OPTIONAL_VARS += ATPROGRAM_PROGRAMMER ATPROGRAM_INTERFACE ATPROGRAM_PORT
-LUFA_BUILD_PROVIDED_VARS +=
-LUFA_BUILD_PROVIDED_MACROS +=
-
-# -----------------------------------------------------------------------------
-# LUFA ATPROGRAM Programmer Buildsystem Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of targets to re-program a device using the Atmel atprogram
-# utility in AVR Studio 5.x and Atmel Studio 6.0 onwards.
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# atprogram - Program target FLASH with application using
-# atprogram
-# atprogram-ee - Program target EEPROM with application data
-# using atprogram
-#
-# MANDATORY PARAMETERS:
-#
-# MCU - Microcontroller device model name
-# TARGET - Application name
-#
-# OPTIONAL PARAMETERS:
-#
-# ATPROGRAM_PROGRAMMER - Name of programming hardware to use
-# ATPROGRAM_INTERFACE - Name of programming interface to use
-# ATPROGRAM_PORT - Name of communication port to use
-#
-# PROVIDED VARIABLES:
-#
-# (None)
-#
-# PROVIDED MACROS:
-#
-# (None)
-#
-# -----------------------------------------------------------------------------
-
-SHELL = /bin/sh
-
-ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set))
-ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank))
-ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N))
-
-# Default values of optionally user-supplied variables
-ATPROGRAM_PROGRAMMER ?= jtagice3
-ATPROGRAM_INTERFACE ?= jtag
-ATPROGRAM_PORT ?=
-
-# Sanity check user supplied values
-$(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR)))
-$(call ERROR_IF_EMPTY, MCU)
-$(call ERROR_IF_EMPTY, TARGET)
-$(call ERROR_IF_EMPTY, ATPROGRAM_PROGRAMMER)
-$(call ERROR_IF_EMPTY, ATPROGRAM_INTERFACE)
-
-# Output Messages
-MSG_ATPROGRAM_CMD := ' [ATPRGRM] :'
-
-# Construct base atprogram command flags
-BASE_ATPROGRAM_FLAGS := --tool $(ATPROGRAM_PROGRAMMER) --interface $(ATPROGRAM_INTERFACE) --device $(MCU)
-ifneq ($(ATPROGRAM_PORT),)
- BASE_ATPROGRAM_FLAGS += --port $(ATPROGRAM_PORT)
-endif
-
-# Construct the flags to use for the various memory spaces
-ifeq ($(ARCH), AVR8)
- ATPROGRAM_FLASH_FLAGS := --chiperase --flash
- ATPROGRAM_EEPROM_FLAGS := --eeprom
-else ifeq ($(ARCH), XMEGA)
- ATPROGRAM_FLASH_FLAGS := --erase --flash
- ATPROGRAM_EEPROM_FLAGS := --eeprom
-else ifeq ($(ARCH), UC3)
- ATPROGRAM_FLASH_FLAGS := --erase
- ATPROGRAM_EEPROM_FLAGS := --eeprom
-else
- $(error Unsupported architecture "$(ARCH)")
-endif
-
-atprogram: $(TARGET).elf $(MAKEFILE_LIST)
- @echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" FLASH using \"$(ATPROGRAM_PROGRAMMER)\"
- atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_FLASH_FLAGS) --file $<
-
-atprogram-ee: $(TARGET).elf $(MAKEFILE_LIST)
- @echo $(MSG_ATPROGRAM_CMD) Programming device \"$(MCU)\" EEPROM using \"$(ATPROGRAM_PROGRAMMER)\"
- atprogram $(BASE_ATPROGRAM_FLAGS) program $(ATPROGRAM_EEPROM_FLAGS) --file $<
-
-# Phony build targets for this module
-.PHONY: atprogram atprogram-ee
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_avrdude.mk b/protocol/lufa/LUFA-120730/LUFA/Build/lufa_avrdude.mk deleted file mode 100644 index 839362528..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_avrdude.mk +++ /dev/null @@ -1,84 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += AVRDUDE
-LUFA_BUILD_TARGETS += avrdude avrdude-ee
-LUFA_BUILD_MANDATORY_VARS += MCU TARGET
-LUFA_BUILD_OPTIONAL_VARS += AVRDUDE_PROGRAMMER AVRDUDE_PORT AVRDUDE_FLAGS
-LUFA_BUILD_PROVIDED_VARS +=
-LUFA_BUILD_PROVIDED_MACROS +=
-
-# -----------------------------------------------------------------------------
-# LUFA AVRDUDE Programmer Buildsystem Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of targets to re-program a device using the open source
-# avr-dude utility.
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# avrdude - Program target FLASH with application using
-# avrdude
-# avrdude-ee - Program target EEPROM with application data
-# using avrdude
-#
-# MANDATORY PARAMETERS:
-#
-# MCU - Microcontroller device model name
-# TARGET - Application name
-#
-# OPTIONAL PARAMETERS:
-#
-# AVRDUDE_PROGRAMMER - Name of programming hardware to use
-# AVRDUDE_PORT - Name of communication port to use
-# AVRDUDE_FLAGS - Flags to pass to avr-dude
-#
-# PROVIDED VARIABLES:
-#
-# (None)
-#
-# PROVIDED MACROS:
-#
-# (None)
-#
-# -----------------------------------------------------------------------------
-
-SHELL = /bin/sh
-
-ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set))
-ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank))
-ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N))
-
-# Default values of optionally user-supplied variables
-AVRDUDE_PROGRAMMER ?= jtagicemkii
-AVRDUDE_PORT ?= usb
-AVRDUDE_FLAGS ?=
-
-# Sanity check user supplied values
-$(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR)))
-$(call ERROR_IF_EMPTY, MCU)
-$(call ERROR_IF_EMPTY, TARGET)
-$(call ERROR_IF_EMPTY, AVRDUDE_PROGRAMMER)
-$(call ERROR_IF_EMPTY, AVRDUDE_PORT)
-
-# Output Messages
-MSG_AVRDUDE_CMD := ' [AVRDUDE] :'
-
-# Construct base avrdude command flags
-BASE_AVRDUDE_FLAGS := -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
-
-avrdude: $(TARGET).hex $(MAKEFILE_LIST)
- @echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" FLASH with settings \"$(AVRDUDE_FLASH_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
- avrdude $(BASE_AVRDUDE_FLAGS) -U flash:w:$< $(AVRDUDE_FLAGS)
-
-avrdude-ee: $(TARGET).eep $(MAKEFILE_LIST)
- @echo $(MSG_AVRDUDE_CMD) Programming device \"$(MCU)\" EEPROM with settings \"$(AVRDUDE_EEP_FLAGS)\" using \"$(AVRDUDE_PROGRAMMER)\" on port \"$(AVRDUDE_PORT)\"
- avrdude $(BASE_AVRDUDE_FLAGS) -U eeprom:w:$< $(AVRDUDE_FLAGS)
-
-# Phony build targets for this module
-.PHONY: avrdude avrdude-ee
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_build.mk b/protocol/lufa/LUFA-120730/LUFA/Build/lufa_build.mk deleted file mode 100644 index 878860627..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_build.mk +++ /dev/null @@ -1,296 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += BUILD
-LUFA_BUILD_TARGETS += size check-source symbol-sizes all lib elf hex lss clean mostlyclean
-LUFA_BUILD_MANDATORY_VARS += TARGET ARCH MCU SRC F_USB LUFA_PATH
-LUFA_BUILD_OPTIONAL_VARS += BOARD OPTIMIZATION C_STANDARD CPP_STANDARD F_CPU C_FLAGS CPP_FLAGS ASM_FLAGS CC_FLAGS LD_FLAGS OBJDIR OBJECT_FILES DEBUG_TYPE DEBUG_LEVEL
-LUFA_BUILD_PROVIDED_VARS +=
-LUFA_BUILD_PROVIDED_MACROS +=
-
-# -----------------------------------------------------------------------------
-# LUFA GCC Compiler Buildsystem Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of targets to build a C, C++ and/or Assembly application
-# via the AVR-GCC compiler.
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# size - List built application size
-# symbol-sizes - Print application symbols from the binary ELF
-# file as a list sorted by size in bytes
-# check-source - Print a list of SRC source files that cannot
-# be found
-# all - Build application and list size
-# lib - Build and archive source files into a library
-# elf - Build application ELF debug object file
-# hex - Build application HEX object files
-# lss - Build application LSS assembly listing file
-# clean - Remove all project intermediatary and binary
-# output files
-# mostlyclean - Remove intermediatary output files, but
-# preserve binaries
-#
-# MANDATORY PARAMETERS:
-#
-# TARGET - Application name
-# ARCH - Device architecture name
-# MCU - Microcontroller device model name
-# SRC - List of input source files (*.c, *.cpp, *.S)
-# F_USB - Speed of the input clock of the USB controller
-# in Hz
-# LUFA_PATH - Path to the LUFA library core
-#
-# OPTIONAL PARAMETERS:
-#
-# BOARD - LUFA board hardware
-# OPTIMIZATION - Optimization level
-# C_STANDARD - C Language Standard to use
-# CPP_STANDARD - C++ Language Standard to use
-# F_CPU - Speed of the CPU, in Hz
-# C_FLAGS - Flags to pass to the C compiler only
-# CPP_FLAGS - Flags to pass to the C++ compiler only
-# ASM_FLAGS - Flags to pass to the assembler only
-# CC_FLAGS - Common flags to pass to the C/C++ compiler and
-# assembler
-# LD_FLAGS - Flags to pass to the linker
-# OBJDIR - Directory for the output object and dependency
-# files; if equal to ".", the output files will
-# be generated in the same folder as the sources
-# OBJECT_FILES - Extra object files to link in to the binaries
-# DEBUG_FORMAT - Format of the debugging information to
-# generate in the compiled object files
-# DEBUG_LEVEL - Level the debugging information to generate in
-# the compiled object files
-#
-# PROVIDED VARIABLES:
-#
-# (None)
-#
-# PROVIDED MACROS:
-#
-# (None)
-#
-# -----------------------------------------------------------------------------
-
-SHELL = /bin/sh
-
-ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set))
-ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank))
-ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N))
-
-# Default values of optionally user-supplied variables
-BOARD ?= NONE
-OPTIMIZATION ?= s
-F_CPU ?=
-C_STANDARD ?= gnu99
-CPP_STANDARD ?= gnu++98
-C_FLAGS ?=
-CPP_FLAGS ?=
-ASM_FLAGS ?=
-CC_FLAGS ?=
-OBJDIR ?= .
-OBJECT_FILES ?=
-DEBUG_FORMAT ?= dwarf-2
-DEBUG_LEVEL ?= 3
-
-# Sanity check user supplied values
-$(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR)))
-$(call ERROR_IF_EMPTY, MCU)
-$(call ERROR_IF_EMPTY, TARGET)
-$(call ERROR_IF_EMPTY, ARCH)
-$(call ERROR_IF_EMPTY, F_USB)
-$(call ERROR_IF_EMPTY, LUFA_PATH)
-$(call ERROR_IF_EMPTY, BOARD)
-$(call ERROR_IF_EMPTY, OPTIMIZATION)
-$(call ERROR_IF_EMPTY, C_STANDARD)
-$(call ERROR_IF_EMPTY, CPP_STANDARD)
-$(call ERROR_IF_EMPTY, OBJDIR)
-$(call ERROR_IF_EMPTY, DEBUG_FORMAT)
-$(call ERROR_IF_EMPTY, DEBUG_LEVEL)
-
-# Determine the utility prefix to use for the selected architecture
-ifeq ($(ARCH), AVR8)
- CROSS := avr
-else ifeq ($(ARCH), XMEGA)
- CROSS := avr
- $(warning The XMEGA device support is currently EXPERIMENTAL (incomplete and/or non-functional), and is included for preview purposes only.)
-else ifeq ($(ARCH), UC3)
- CROSS := avr32
- $(warning The UC3 device support is currently EXPERIMENTAL (incomplete and/or non-functional), and is included for preview purposes only.)
-else
- $(error Unsupported architecture "$(ARCH)")
-endif
-
-# Output Messages
-MSG_COMPILE_CMD := ' [GCC] :'
-MSG_ASSEMBLE_CMD := ' [GAS] :'
-MSG_NM_CMD := ' [NM] :'
-MSG_REMOVE_CMD := ' [RM] :'
-MSG_LINK_CMD := ' [LNK] :'
-MSG_ARCHIVE_CMD := ' [AR] :'
-MSG_SIZE_CMD := ' [SIZE] :'
-MSG_OBJCPY_CMD := ' [OBJCPY] :'
-MSG_OBJDMP_CMD := ' [OBJDMP] :'
-
-# Convert input source file list to differentiate them by type
-C_SOURCE := $(filter %.c, $(SRC))
-CPP_SOURCE := $(filter %.cpp, $(SRC))
-ASM_SOURCE := $(filter %.S, $(SRC))
-
-# Create a list of unknown source file types, if any are found throw an error
-UNKNOWN_SOURCE := $(filter-out $(C_SOURCE) $(CPP_SOURCE) $(ASM_SOURCE), $(SRC))
-ifneq ($(UNKNOWN_SOURCE),)
- $(error Unknown input source file formats: $(UNKNOWN_SOURCE))
-endif
-
-# Convert input source filenames into a list of required output object files
-OBJECT_FILES += $(addsuffix .o, $(basename $(SRC)))
-ifneq ($(OBJDIR),.)
- $(shell mkdir $(OBJDIR) 2> /dev/null)
- VPATH += $(dir $(SRC))
- OBJECT_FILES := $(addprefix $(patsubst %/,%,$(OBJDIR))/, $(notdir $(OBJECT_FILES)))
-
- # Check if any object file (without path) appears more than once in the object file list
- ifneq ($(words $(sort $(OBJECT_FILES))), $(words $(OBJECT_FILES)))
- $(error Cannot build with OBJDIR parameter set - one or more object file name is not unique)
- endif
-endif
-
-# Create a list of dependency files from the list of object files
-DEPENDENCY_FILES := $(OBJECT_FILES:%.o=%.d)
-
-# Create a list of common flags to pass to the compiler/linker/assembler
-BASE_CC_FLAGS := -pipe -g$(DEBUG_FORMAT) -g$(DEBUG_LEVEL)
-ifeq ($(ARCH), AVR8)
- BASE_CC_FLAGS += -mmcu=$(MCU) -fshort-enums -fno-inline-small-functions -fpack-struct
-else ifeq ($(ARCH), XMEGA)
- BASE_CC_FLAGS += -mmcu=$(MCU) -fshort-enums -fno-inline-small-functions -fpack-struct
-else ifeq ($(ARCH), UC3)
- BASE_CC_FLAGS += -mpart=$(MCU:at32%=%) -masm-addr-pseudos
-endif
-BASE_CC_FLAGS += -Wall -fno-strict-aliasing -funsigned-char -funsigned-bitfields -ffunction-sections
-BASE_CC_FLAGS += -I. -I$(patsubst %/,%,$(LUFA_PATH))/..
-BASE_CC_FLAGS += -DARCH=ARCH_$(ARCH) -DBOARD=BOARD_$(BOARD) -DF_USB=$(F_USB)UL
-ifneq ($(F_CPU),)
- BASE_CC_FLAGS += -DF_CPU=$(F_CPU)UL
-endif
-
-# Additional language specific compiler flags
-BASE_C_FLAGS := -x c -O$(OPTIMIZATION) -std=$(C_STANDARD) -Wstrict-prototypes
-BASE_CPP_FLAGS := -x c++ -O$(OPTIMIZATION) -std=$(CPP_STANDARD)
-BASE_ASM_FLAGS := -x assembler-with-cpp
-
-# Create a list of flags to pass to the linker
-BASE_LD_FLAGS := -lm -Wl,-Map=$(TARGET).map,--cref -Wl,--gc-sections -Wl,--relax
-ifeq ($(ARCH), AVR8)
- BASE_LD_FLAGS += -mmcu=$(MCU)
-else ifeq ($(ARCH), XMEGA)
- BASE_LD_FLAGS += -mmcu=$(MCU)
-else ifeq ($(ARCH), UC3)
- BASE_LD_FLAGS += -mpart=$(MCU:at32%=%) --rodata-writable --direct-data
-endif
-
-# Determine flags to pass to the size utility based on its reported features (only invoke if size target required)
-size: SIZE_MCU_FLAG := $(shell $(CROSS)-size --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-size: SIZE_FORMAT_FLAG := $(shell $(CROSS)-size --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
-
-
-build_begin:
- @echo ""
- @echo Begin compilation of project \"$(TARGET)\"...
- @echo ""
-
-build_end:
- @echo Finished building project \"$(TARGET)\".
- @echo ""
-
-gcc-version:
- @$(CROSS)-gcc --version
-
-check-source:
- @for f in $(SRC); do \
- if [ ! -f $$f ]; then \
- echo "Error: Source file not found: $$f"; \
- exit 1; \
- fi; \
- done
-
-size: $(TARGET).elf
- @echo $(MSG_SIZE_CMD) Determining size of \"$<\"
- @echo ""
- $(CROSS)-size $(SIZE_MCU_FLAG) $(SIZE_FORMAT_FLAG) $< ; 2>/dev/null;
-
-symbol-sizes: $(TARGET).elf
- @echo $(MSG_NM_CMD) Extracting \"$<\" symbols with decimal byte sizes
- $(CROSS)-nm --size-sort --demangle --radix=d $<
-
-mostlyclean:
- @echo $(MSG_REMOVE_CMD) Removing object files of \"$(TARGET)\"
- rm -f $(OBJECT_FILES)
- @echo $(MSG_REMOVE_CMD) Removing dependency files of \"$(TARGET)\"
- rm -f $(DEPENDENCY_FILES)
-
-clean: mostlyclean
- @echo $(MSG_REMOVE_CMD) Removing output files of \"$(TARGET)\"
- rm -f $(TARGET).elf $(TARGET).hex $(TARGET).eep $(TARGET).map $(TARGET).lss $(TARGET).sym $(TARGET).a
-
-all: build_begin check-source gcc-version elf hex lss sym size build_end
-
-lib: lib$(TARGET).a
-elf: $(TARGET).elf
-hex: $(TARGET).hex $(TARGET).eep
-lss: $(TARGET).lss
-sym: $(TARGET).sym
-
-$(OBJDIR)/%.o: %.c $(MAKEFILE_LIST)
- @echo $(MSG_COMPILE_CMD) Compiling C file \"$(notdir $<)\"
- $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_C_FLAGS) $(CC_FLAGS) $(C_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
-
-$(OBJDIR)/%.o: %.cpp $(MAKEFILE_LIST)
- @echo $(MSG_COMPILE_CMD) Compiling C++ file \"$(notdir $<)\"
- $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_CPP_FLAGS) $(CC_FLAGS) $(CPP_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
-
-$(OBJDIR)/%.o: %.S $(MAKEFILE_LIST)
- @echo $(MSG_ASSEMBLE_CMD) Assembling \"$(notdir $<)\"
- $(CROSS)-gcc -c $(BASE_CC_FLAGS) $(BASE_ASM_FLAGS) $(CC_FLAGS) $(ASM_FLAGS) -MMD -MP -MF $(@:%.o=%.d) $< -o $@
-
-.PRECIOUS : $(OBJECT_FILES)
-.SECONDARY : %.a
-%.a: $(OBJECT_FILES)
- @echo $(MSG_ARCHIVE_CMD) Archiving object files into \"$@\"
- $(CROSS)-ar rcs $@ $(OBJECT_FILES)
-
-.PRECIOUS : $(OBJECT_FILES)
-.SECONDARY : %.elf
-%.elf: $(OBJECT_FILES)
- @echo $(MSG_LINK_CMD) Linking object files into \"$@\"
- $(CROSS)-gcc $(BASE_LD_FLAGS) $(LD_FLAGS) $^ -o $@
-
-%.hex: %.elf
- @echo $(MSG_OBJCPY_CMD) Extracting HEX file data from \"$<\"
- $(CROSS)-objcopy -O ihex -R .eeprom -R .fuse -R .lock -R .signature $< $@
-
-%.eep: %.elf
- @echo $(MSG_OBJCPY_CMD) Extracting EEP file data from \"$<\"
- $(CROSS)-objcopy -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O ihex $< $@ || exit 0
-
-%.lss: %.elf
- @echo $(MSG_OBJDMP_CMD) Extracting LSS file data from \"$<\"
- $(CROSS)-objdump -h -S -z $< > $@
-
-%.sym: %.elf
- @echo $(MSG_NM_CMD) Extracting SYM file data from \"$<\"
- $(CROSS)-nm -n $< > $@
-
-# Include build dependency files
--include $(DEPENDENCY_FILES)
-
-# Phony build targets for this module
-.PHONY: build_begin build_end gcc-version check-source size symbol-sizes lib elf hex lss clean mostlyclean
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_core.mk b/protocol/lufa/LUFA-120730/LUFA/Build/lufa_core.mk deleted file mode 100644 index bde1e11c9..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_core.mk +++ /dev/null @@ -1,152 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += CORE
-LUFA_BUILD_TARGETS += help list_targets list_modules list_mandatory list_optional list_provided list_macros
-LUFA_BUILD_MANDATORY_VARS +=
-LUFA_BUILD_OPTIONAL_VARS +=
-LUFA_BUILD_PROVIDED_VARS +=
-LUFA_BUILD_PROVIDED_MACROS +=
-
-# -----------------------------------------------------------------------------
-# LUFA Core Build System Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of core build targets for the LUFA build system
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# help - Build system help
-# list_targets - List all build targets
-# list_modules - List all build modules
-# list_mandatory - List all mandatory make variables required by
-# the included build modules of the application
-# list_optional - List all optional make variables required by
-# the included build modules of the application
-# list_provided - List all provided make variables from the
-# included build modules of the application
-# list_macros - List all provided make macros from the
-# included build modules of the application
-#
-# MANDATORY PARAMETERS:
-#
-# (None)
-#
-# OPTIONAL PARAMETERS:
-#
-# (None)
-#
-# PROVIDED VARIABLES:
-#
-# (None)
-#
-# PROVIDED MACROS:
-#
-# (None)
-#
-# -----------------------------------------------------------------------------
-
-SHELL = /bin/sh
-
-# Build sorted and filtered lists of the included build module data
-SORTED_LUFA_BUILD_MODULES = $(sort $(LUFA_BUILD_MODULES))
-SORTED_LUFA_BUILD_TARGETS = $(sort $(LUFA_BUILD_TARGETS))
-SORTED_LUFA_MANDATORY_VARS = $(sort $(LUFA_BUILD_MANDATORY_VARS))
-SORTED_LUFA_OPTIONAL_VARS = $(filter-out $(SORTED_LUFA_MANDATORY_VARS), $(sort $(LUFA_BUILD_OPTIONAL_VARS)))
-SORTED_LUFA_PROVIDED_VARS = $(sort $(LUFA_BUILD_PROVIDED_VARS))
-SORTED_LUFA_PROVIDED_MACROS = $(sort $(LUFA_BUILD_PROVIDED_MACROS))
-
-# Create printable versions of the sorted build module data (use "(None)" when no data is available)
-PRINTABLE_LUFA_BUILD_MODULES = $(if $(strip $(SORTED_LUFA_BUILD_MODULES)), $(SORTED_LUFA_BUILD_MODULES), (None))
-PRINTABLE_LUFA_BUILD_TARGETS = $(if $(strip $(SORTED_LUFA_BUILD_TARGETS)), $(SORTED_LUFA_BUILD_TARGETS), (None))
-PRINTABLE_LUFA_MANDATORY_VARS = $(if $(strip $(SORTED_LUFA_MANDATORY_VARS)), $(SORTED_LUFA_MANDATORY_VARS), (None))
-PRINTABLE_LUFA_OPTIONAL_VARS = $(if $(strip $(SORTED_LUFA_OPTIONAL_VARS)), $(SORTED_LUFA_OPTIONAL_VARS), (None))
-PRINTABLE_LUFA_PROVIDED_VARS = $(if $(strip $(SORTED_LUFA_PROVIDED_VARS)), $(SORTED_LUFA_PROVIDED_VARS), (None))
-PRINTABLE_LUFA_PROVIDED_MACROS = $(if $(strip $(SORTED_LUFA_PROVIDED_MACROS)), $(SORTED_LUFA_PROVIDED_MACROS), (None))
-
-help:
- @echo "==================================================================="
- @echo " LUFA Build System 2.0 "
- @echo " (C) Dean Camera, 2012 { dean @ fourwalledcubicle . com } "
- @echo "==================================================================="
- @echo "DESCRIPTION: "
- @echo " This build system is a set of makefile modules for (GNU) Make, to "
- @echo " provide a simple system for building LUFA powered applications. "
- @echo " Each makefile module can be included from within a user makefile, "
- @echo " to expose the build rules documented in the comments at the top of"
- @echo " each build module. "
- @echo " "
- @echo "USAGE: "
- @echo " To execute a rule, define all variables indicated in the desired "
- @echo " module as a required parameter before including the build module "
- @echo " in your project makefile. Parameters marked as optional will "
- @echo " assume a default value in the modules if not user-assigned. "
- @echo " "
- @echo " By default the target output shows both a friendly summary, as "
- @echo " well as the actual invoked command. To suppress the output of the "
- @echo " invoked commands and show only the friendly command output, run "
- @echo " make with the \"-s\" switch added before the target(s). "
- @echo "==================================================================="
- @echo " "
- @echo " Currently used build system modules in this application: "
- @echo " "
- @printf " %b" "$(PRINTABLE_LUFA_BUILD_MODULES:%= - %\n)"
- @echo " "
- @echo " "
- @echo " Currently available build targets in this application: "
- @echo " "
- @printf " %b" "$(PRINTABLE_LUFA_BUILD_TARGETS:%= - %\n)"
- @echo " "
- @echo " "
- @echo " Mandatory variables required by the selected build Modules: "
- @echo " "
- @printf " %b" "$(PRINTABLE_LUFA_MANDATORY_VARS:%= - %\n)"
- @echo " "
- @echo " "
- @echo " Optional variables required by the selected build Modules: "
- @echo " "
- @printf " %b" "$(PRINTABLE_LUFA_OPTIONAL_VARS:%= - %\n)"
- @echo " "
- @echo " "
- @echo " Variables provided by the selected build Modules: "
- @echo " "
- @printf " %b" "$(PRINTABLE_LUFA_PROVIDED_VARS:%= - %\n)"
- @echo " "
- @echo " "
- @echo " Macros provided by the selected build Modules: "
- @echo " "
- @printf " %b" "$(PRINTABLE_LUFA_PROVIDED_MACROS:%= - %\n)"
- @echo " "
- @echo "==================================================================="
- @echo " The LUFA BuildSystem 2.0 - Powered By Unicorns (tm) "
- @echo "==================================================================="
-
-list_modules:
- @echo Currently Used Build System Modules: $(PRINTABLE_LUFA_BUILD_MODULES)
-
-list_targets:
- @echo Currently Available Build Targets: $(PRINTABLE_LUFA_BUILD_TARGETS)
-
-list_mandatory:
- @echo Mandatory Variables for Included Modules: $(PRINTABLE_LUFA_MANDATORY_VARS)
-
-list_optional:
- @echo Optional Variables for Included Modules: $(PRINTABLE_LUFA_OPTIONAL_VARS)
-
-list_provided:
- @echo Variables Provided by the Included Modules: $(PRINTABLE_LUFA_PROVIDED_VARS)
-
-list_macros:
- @echo Macros Provided by the Included Modules: $(PRINTABLE_LUFA_PROVIDED_MACROS)
-
-# Disable default in-built make rules (those that are needed are explicitly
-# defined, and doing so has performance benefits when recursively building)
-.SUFFIXES:
-
-# Phony build targets for this module
-.PHONY: help list_modules list_targets list_mandatory list_optional list_provided list_macros
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_cppcheck.mk b/protocol/lufa/LUFA-120730/LUFA/Build/lufa_cppcheck.mk deleted file mode 100644 index 1e3604c7d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_cppcheck.mk +++ /dev/null @@ -1,104 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += CPPCHECK
-LUFA_BUILD_TARGETS += cppcheck cppcheck-config
-LUFA_BUILD_MANDATORY_VARS += SRC
-LUFA_BUILD_OPTIONAL_VARS += CPPCHECK_INCLUDES CPPCHECK_EXCLUDES CPPCHECK_MSG_TEMPLATE CPPCHECK_ENABLE \
- CPPCHECK_SUPPRESS CPPCHECK_FAIL_ON_WARNING CPPCHECK_QUIET CPPCHECK_FLAGS
-LUFA_BUILD_PROVIDED_VARS +=
-LUFA_BUILD_PROVIDED_MACROS +=
-
-# -----------------------------------------------------------------------------
-# LUFA CPPCheck Buildsystem Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of targets to scan a project with the free "cppcheck" static
-# analysis tool, to check for code errors at runtime (see http://cppcheck.sourceforge.net).
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# cppcheck - Scan the project with CPPCheck
-# cppcheck-config - Use CPPCheck to look for missing include files
-#
-# MANDATORY PARAMETERS:
-#
-# SRC - List of source files to statically analyze
-#
-# OPTIONAL PARAMETERS:
-#
-# CPPCHECK_INCLUDES - Extra include paths to search for missing
-# header files
-# CPPCHECK_EXCLUDES - Source file paths to exclude checking (can be
-# a path fragment if desired)
-# CPPCHECK_MSG_TEMPLATE - Template for cppcheck error and warning output
-# CPPCHECK_ENABLE - General cppcheck category checks to enable
-# CPPCHECK_SUPPRESS - Specific cppcheck warnings to disable by ID
-# CPPCHECK_FAIL_ON_WARNING - Set to Y to fail the build on cppcheck
-# warnings, N to continue even if warnings occur
-# CPPCHECK_QUIET - Enable cppcheck verbose or quiet output mode
-# CPPCHECK_FLAGS - Additional flags to pass to cppcheck
-#
-# PROVIDED VARIABLES:
-#
-# (None)
-#
-# PROVIDED MACROS:
-#
-# (None)
-#
-# -----------------------------------------------------------------------------
-
-SHELL = /bin/sh
-
-ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set))
-ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank))
-ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N))
-
-# Default values of optionally user-supplied variables
-CPPCHECK_INCLUDES ?=
-CPPCHECK_EXCLUDES ?=
-CPPCHECK_MSG_TEMPLATE ?= {file}:{line}: {severity} ({id}): {message}
-CPPCHECK_ENABLE ?= all
-CPPCHECK_SUPPRESS ?= variableScope missingInclude
-CPPCHECK_FAIL_ON_WARNING ?= Y
-CPPCHECK_QUIET ?= Y
-CPPCHECK_FLAGS ?=
-
-# Sanity check user supplied values
-$(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR)))
-$(call ERROR_IF_EMPTY, SRC)
-$(call ERROR_IF_EMPTY, CPPCHECK_MSG_TEMPLATE)
-$(call ERROR_IF_EMPTY, CPPCHECK_ENABLE)
-$(call ERROR_IF_NONBOOL, CPPCHECK_FAIL_ON_WARNING)
-$(call ERROR_IF_NONBOOL, CPPCHECK_QUIET)
-
-# Build a default argument list for cppcheck
-BASE_CPPCHECK_FLAGS := --template="$(CPPCHECK_MSG_TEMPLATE)" $(CPPCHECK_INCLUDES:%=-I%) $(CPPCHECK_EXCLUDES:%=-i%) --inline-suppr --force --std=c99
-
-# Sanity check parameters and construct additional command line arguments to cppcheck
-ifeq ($(CPPCHECK_FAIL_ON_WARNING), Y)
- BASE_CPPCHECK_FLAGS += --error-exitcode=1
-endif
-ifeq ($(CPPCHECK_QUIET), Y)
- BASE_CPPCHECK_FLAGS += --quiet
-endif
-
-# Output Messages
-MSG_CPPCHECK_CMD := ' [CPPCHECK]:'
-
-cppcheck-config:
- @echo $(MSG_CPPCHECK_CMD) Checking cppcheck configuration check on source files
- cppcheck $(BASE_CPPCHECK_FLAGS) --check-config $(CPPCHECK_FLAGS) $(SRC)
-
-cppcheck:
- @echo $(MSG_CPPCHECK_CMD) Performing static analysis on source files
- cppcheck $(BASE_CPPCHECK_FLAGS) --enable=$(CPPCHECK_ENABLE) $(CPPCHECK_SUPPRESS:%=--suppress=%) $(CPPCHECK_FLAGS) $(SRC)
-
-# Phony build targets for this module
-.PHONY: cppcheck-config cppcheck
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_dfu.mk b/protocol/lufa/LUFA-120730/LUFA/Build/lufa_dfu.mk deleted file mode 100644 index 6bfe97942..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_dfu.mk +++ /dev/null @@ -1,93 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += DFU
-LUFA_BUILD_TARGETS += flip flip-ee dfu dfu-ee
-LUFA_BUILD_MANDATORY_VARS += MCU TARGET
-LUFA_BUILD_OPTIONAL_VARS +=
-LUFA_BUILD_PROVIDED_VARS +=
-LUFA_BUILD_PROVIDED_MACROS +=
-
-# -----------------------------------------------------------------------------
-# LUFA DFU Bootloader Buildsystem Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of targets to re-program a device currently running a DFU
-# class bootloader with a project's FLASH and EEPROM files.
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# flip - Program FLASH into target via Atmel FLIP
-# flip-ee - Program EEPROM into target via Atmel FLIP
-# dfu - Program FLASH into target via dfu-programmer
-# dfu-ee - Program EEPROM into target via dfu-programmer
-#
-# MANDATORY PARAMETERS:
-#
-# MCU - Microcontroller device model name
-# TARGET - Application name
-#
-# OPTIONAL PARAMETERS:
-#
-# (None)
-#
-# PROVIDED VARIABLES:
-#
-# (None)
-#
-# PROVIDED MACROS:
-#
-# (None)
-#
-# -----------------------------------------------------------------------------
-
-SHELL = /bin/sh
-
-ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set))
-ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank))
-ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N))
-
-# Sanity-check values of mandatory user-supplied variables
-$(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR)))
-$(call ERROR_IF_EMPTY, MCU)
-$(call ERROR_IF_EMPTY, TARGET)
-
-# Output Messages
-MSG_COPY_CMD := ' [CP] :'
-MSG_REMOVE_CMD := ' [RM] :'
-MSG_DFU_CMD := ' [DFU] :'
-
-flip: $(TARGET).hex $(MAKEFILE_LIST)
- @echo $(MSG_DFU_CMD) Programming FLASH with batchisp using \"$<\"
- batchisp -hardware usb -device $(MCU) -operation erase f
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $< program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
-
-flip-ee: $(TARGET).eep $(MAKEFILE_LIST)
- @echo $(MSG_DFU_CMD) Copying EEP file to temporary file \"$<.hex\"
- cp $< $<.hex
- @echo $(MSG_DFU_CMD) Programming EEPROM with batchisp using \"$<.hex\"
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $<.hex program
- batchisp -hardware usb -device $(MCU) -operation start reset 0
- @echo $(MSG_DFU_CMD) Removing temporary file \"$<.hex\"
- rm $<.hex
-
-dfu: $(TARGET).hex $(MAKEFILE_LIST)
- @echo $(MSG_DFU_CMD) Programming FLASH with dfu-programmer using \"$<\"
- dfu-programmer $(MCU) erase
- dfu-programmer $(MCU) flash $<
- dfu-programmer $(MCU) reset
-
-dfu-ee: $(TARGET).eep $(MAKEFILE_LIST)
- @echo $(MSG_DFU_CMD) Programming EEPROM with dfu-programmer using \"$<\"
- dfu-programmer $(MCU) eeprom-flash $<
- dfu-programmer $(MCU) reset
-
-# Phony build targets for this module
-.PHONY: flip flip-ee dfu dfu-ee
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_doxygen.mk b/protocol/lufa/LUFA-120730/LUFA/Build/lufa_doxygen.mk deleted file mode 100644 index 87427fd27..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_doxygen.mk +++ /dev/null @@ -1,81 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += DOXYGEN
-LUFA_BUILD_TARGETS += doxygen
-LUFA_BUILD_MANDATORY_VARS += LUFA_PATH
-LUFA_BUILD_OPTIONAL_VARS += DOXYGEN_CONF DOXYGEN_FAIL_ON_WARNING DOXYGEN_OVERRIDE_PARAMS
-LUFA_BUILD_PROVIDED_VARS +=
-LUFA_BUILD_PROVIDED_MACROS +=
-
-# -----------------------------------------------------------------------------
-# LUFA Doxygen Buildsystem Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of targets to automatically build Doxygen documentation for
-# a project (see www.doxygen.org).
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# doxygen - Build Doxygen Documentation
-#
-# MANDATORY PARAMETERS:
-#
-# LUFA_PATH - Path to the LUFA library core
-#
-# OPTIONAL PARAMETERS:
-#
-# DOXYGEN_CONF - Doxygen configuration filename
-# DOXYGEN_FAIL_ON_WARNING - Set to Y to fail the build on Doxygen warnings,
-# N to continue even if warnings occur
-# DOXYGEN_OVERRIDE_PARAMS - Parameters to override in the doxygen
-# configuration file
-# PROVIDED VARIABLES:
-#
-# (None)
-#
-# PROVIDED MACROS:
-#
-# (None)
-#
-# -----------------------------------------------------------------------------
-
-SHELL = /bin/sh
-
-ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set))
-ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank))
-ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N))
-
-# Default values of optionally user-supplied variables
-DOXYGEN_CONF ?= Doxygen.conf
-DOXYGEN_FAIL_ON_WARNING ?= Y
-DOXYGEN_OVERRIDE_PARAMS ?= QUIET=YES HTML_STYLESHEET=$(patsubst %/,%,$(LUFA_PATH))/DoxygenPages/Style/Style.css
-
-# Sanity check user supplied values
-$(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR)))
-$(call ERROR_IF_EMPTY, DOXYGEN_CONF)
-$(call ERROR_IF_EMPTY, LUFA_PATH)
-$(call ERROR_IF_NONBOOL, DOXYGEN_FAIL_ON_WARNING)
-
-# Output Messages
-MSG_DOXYGEN_CMD := ' [DOXYGEN] :'
-
-# Determine Doxygen invocation command
-BASE_DOXYGEN_CMD := ( cat $(DOXYGEN_CONF) $(DOXYGEN_OVERRIDE_PARAMS:%=; echo "%") ) | doxygen -
-ifeq ($(DOXYGEN_FAIL_ON_WARNING), Y)
- DOXYGEN_CMD := if ( $(BASE_DOXYGEN_CMD) 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then exit 1; fi;
-else
- DOXYGEN_CMD := $(BASE_DOXYGEN_CMD)
-endif
-
-doxygen:
- @echo $(MSG_DOXYGEN_CMD) Configuration file \"$(DOXYGEN_CONF)\" with parameters \"$(DOXYGEN_OVERRIDE_PARAMS)\"
- $(DOXYGEN_CMD)
-
-# Phony build targets for this module
-.PHONY: doxygen
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_hid.mk b/protocol/lufa/LUFA-120730/LUFA/Build/lufa_hid.mk deleted file mode 100644 index b8f6f2682..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_hid.mk +++ /dev/null @@ -1,88 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += HID
-LUFA_BUILD_TARGETS += hid hid-ee teensy teensy-ee
-LUFA_BUILD_MANDATORY_VARS += MCU TARGET
-LUFA_BUILD_OPTIONAL_VARS +=
-LUFA_BUILD_PROVIDED_VARS +=
-LUFA_BUILD_PROVIDED_MACROS +=
-
-# -----------------------------------------------------------------------------
-# LUFA HID Bootloader Buildsystem Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of targets to re-program a device currently running a HID
-# class bootloader with a project's FLASH files.
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# hid - Program FLASH into target via
-# hid_bootloader_cli
-# hid-ee - Program EEPROM into target via a temporary
-# AVR application and hid_bootloader_cli
-# teensy - Program FLASH into target via
-# teensy_loader_cli
-# teensy-ee - Program EEPROM into target via a temporary
-# AVR application and teensy_loader_cli
-#
-# MANDATORY PARAMETERS:
-#
-# MCU - Microcontroller device model name
-# TARGET - Application name
-#
-# OPTIONAL PARAMETERS:
-#
-# (None)
-#
-# PROVIDED VARIABLES:
-#
-# (None)
-#
-# PROVIDED MACROS:
-#
-# (None)
-#
-# -----------------------------------------------------------------------------
-
-ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set))
-ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank))
-ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N))
-
-# Sanity-check values of mandatory user-supplied variables
-$(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR)))
-$(call ERROR_IF_EMPTY, MCU)
-$(call ERROR_IF_EMPTY, TARGET)
-
-# Output Messages
-MSG_HID_BOOTLOADER_CMD := ' [HID] :'
-MSG_OBJCPY_CMD := ' [OBJCPY] :'
-MSG_MAKE_CMD := ' [MAKE] :'
-
-hid: $(TARGET).hex $(MAKEFILE_LIST)
- @echo $(MSG_HID_BOOTLOADER_CMD) Programming FLASH with hid_bootloader_cli using \"$<\"
- hid_bootloader_cli -mmcu=$(MCU) -v $<
-
-hid-ee: $(TARGET).eep $(MAKEFILE_LIST)
- @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a binary file \"InputEEData.bin\"
- avr-objcopy -I ihex -O binary $< $(patsubst %/,%,$(LUFA_PATH))/Build/HID_EEPROM_Loader/InputEEData.bin
- @echo $(MSG_MAKE_CMD) Making EEPROM loader application for \"$<\"
- make -C $(patsubst %/,%,$(LUFA_PATH))/Build/HID_EEPROM_Loader/ MCU=$(MCU) clean hid
-
-teensy: $(TARGET).hex $(MAKEFILE_LIST)
- @echo $(MSG_HID_BOOTLOADER_CMD) Programming FLASH with teensy_loader_cli using \"$<\"
- teensy_loader_cli -mmcu=$(MCU) -v $<
-
-teensy-ee: $(TARGET).hex $(MAKEFILE_LIST)
- @echo $(MSG_OBJCPY_CMD) Converting \"$<\" to a binary file \"InputEEData.bin\"
- avr-objcopy -I ihex -O binary $< $(patsubst %/,%,$(LUFA_PATH))/Build/HID_EEPROM_Loader/InputEEData.bin
- @echo $(MSG_MAKE_CMD) Making EEPROM loader application for \"$<\"
- make -s -C $(patsubst %/,%,$(LUFA_PATH))/Build/HID_EEPROM_Loader/ MCU=$(MCU) clean hid-teensy
-
-# Phony build targets for this module
-.PHONY: hid hid-ee teensy teensy-ee
diff --git a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_sources.mk b/protocol/lufa/LUFA-120730/LUFA/Build/lufa_sources.mk deleted file mode 100644 index 663c93024..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Build/lufa_sources.mk +++ /dev/null @@ -1,116 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-
-LUFA_BUILD_MODULES += SOURCES
-LUFA_BUILD_TARGETS +=
-LUFA_BUILD_MANDATORY_VARS += LUFA_PATH ARCH
-LUFA_BUILD_OPTIONAL_VARS +=
-LUFA_BUILD_PROVIDED_VARS += LUFA_SRC_USB LUFA_SRC_USBCLASS LUFA_SRC_TEMPERATURE LUFA_SRC_SERIAL LUFA_SRC_TWI LUFA_SRC_PLATFORM
-LUFA_BUILD_PROVIDED_MACROS +=
-
-# -----------------------------------------------------------------------------
-# LUFA Sources Buildsystem Makefile Module.
-# -----------------------------------------------------------------------------
-# DESCRIPTION:
-# Provides a set of makefile variables for the various LUFA module sources.
-# Once included, the sources required to use a given LUFA module will become
-# available using the makefile variable names listed in the LUFA project
-# documentation.
-# -----------------------------------------------------------------------------
-# TARGETS:
-#
-# (None)
-#
-# MANDATORY PARAMETERS:
-#
-# LUFA_PATH - Path to the LUFA library core
-# ARCH - Device architecture name
-#
-# OPTIONAL PARAMETERS:
-#
-# (None)
-#
-# PROVIDED VARIABLES:
-#
-# LUFA_SRC_USB - List of LUFA USB driver source files
-# LUFA_SRC_USBCLASS - List of LUFA USB Class driver source files
-# LUFA_SRC_TEMPERATURE - List of LUFA temperature sensor driver source
-# files
-# LUFA_SRC_SERIAL - List of LUFA Serial U(S)ART driver source files
-# LUFA_SRC_TWI - List of LUFA TWI driver source files
-# LUFA_SRC_PLATFORM - List of LUFA architecture specific platform
-# management source files
-#
-# PROVIDED MACROS:
-#
-# (None)
-#
-# -----------------------------------------------------------------------------
-
-SHELL = /bin/sh
-
-ERROR_IF_UNSET ?= $(if $(filter undefined, $(origin $(strip $(1)))), $(error Makefile $(strip $(1)) value not set))
-ERROR_IF_EMPTY ?= $(if $(strip $($(strip $(1)))), , $(error Makefile $(strip $(1)) option cannot be blank))
-ERROR_IF_NONBOOL ?= $(if $(filter Y N, $($(strip $(1)))), , $(error Makefile $(strip $(1)) option must be Y or N))
-
-# Sanity check user supplied values
-$(foreach MANDATORY_VAR, $(LUFA_BUILD_MANDATORY_VARS), $(call ERROR_IF_UNSET, $(MANDATORY_VAR)))
-$(call ERROR_IF_EMPTY, LUFA_PATH)
-$(call ERROR_IF_EMPTY, ARCH)
-
-# Allow LUFA_ROOT_PATH to be overridden elsewhere to support legacy LUFA makefiles
-LUFA_ROOT_PATH ?= $(patsubst %/,%,$(LUFA_PATH))
-
-# Construct LUFA module source variables
-LUFA_SRC_USB := $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Device_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Endpoint_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Host_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/Pipe_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBController_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/USBInterrupt_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/EndpointStream_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/$(ARCH)/PipeStream_$(ARCH).c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/ConfigDescriptors.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/DeviceStandardReq.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/Events.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/HostStandardReq.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Core/USBTask.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Common/HIDParser.c
-LUFA_SRC_USBCLASS := $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/AudioClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/HIDClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MassStorageClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/MIDIClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/RNDISClassDevice.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/AudioClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/CDCClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/HIDClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MassStorageClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/MIDIClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/PrinterClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/RNDISClassHost.c \
- $(LUFA_ROOT_PATH)/Drivers/USB/Class/Host/StillImageClassHost.c
-LUFA_SRC_TEMPERATURE := $(LUFA_ROOT_PATH)/Drivers/Board/Temperature.c
-LUFA_SRC_SERIAL := $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/Serial_$(ARCH).c
-LUFA_SRC_TWI := $(LUFA_ROOT_PATH)/Drivers/Peripheral/$(ARCH)/TWI_$(ARCH).c
-
-ifeq ($(ARCH), UC3)
- LUFA_SRC_PLATFORM := $(LUFA_ROOT_PATH)/Platform/UC3/Exception.S \
- $(LUFA_ROOT_PATH)/Platform/UC3/InterruptManagement.c
-else
- LUFA_SRC_PLATFORM :=
-endif
-
-# Build a list of all available module sources
-LUFA_SRC_ALL_FILES := $(LUFA_SRC_USB) \
- $(LUFA_SRC_USBCLASS) \
- $(LUFA_SRC_TEMPERATURE) \
- $(LUFA_SRC_SERIAL) \
- $(LUFA_SRC_TWI) \
- $(LUFA_SRC_PLATFORM)
diff --git a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/Buttons.h deleted file mode 100644 index ca4c7a5eb..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/Buttons.h +++ /dev/null @@ -1,90 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief LUFA Custom Board Button Hardware Driver (Template)
- *
- * This is a stub driver header file, for implementing custom board
- * layout hardware with compatible LUFA board specific drivers. If
- * the library is configured to use the BOARD_USER board mode, this
- * driver file should be completed and copied into the "/Board/" folder
- * inside the application's folder.
- *
- * This stub is for the board-specific component of the LUFA Buttons driver,
- * for the control of physical board-mounted GPIO pushbuttons.
- */
-
-#ifndef __BUTTONS_USER_H__
-#define __BUTTONS_USER_H__
-
- /* Includes: */
- // TODO: Add any required includes here
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 // TODO: Add mask for first board button here
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- // TODO: Initialize the appropriate port pins as an inputs here, with pull-ups
- }
-
- static inline void Buttons_Disable(void)
- {
- // TODO: Clear the appropriate port pins as high impedance inputs here
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- // TODO: Return current button status here, debounced if required
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/Dataflash.h b/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/Dataflash.h deleted file mode 100644 index d397f77ed..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/Dataflash.h +++ /dev/null @@ -1,220 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief LUFA Custom Board Dataflash Hardware Driver (Template)
- *
- * This is a stub driver header file, for implementing custom board
- * layout hardware with compatible LUFA board specific drivers. If
- * the library is configured to use the BOARD_USER board mode, this
- * driver file should be completed and copied into the "/Board/" folder
- * inside the application's folder.
- *
- * This stub is for the board-specific component of the LUFA Dataflash
- * driver.
-*/
-
-#ifndef __DATAFLASH_USER_H__
-#define __DATAFLASH_USER_H__
-
- /* Includes: */
- // TODO: Add any required includes here
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_DATAFLASH_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define DATAFLASH_CHIPCS_MASK // TODO: Replace this with a mask of all the /CS pins of all Dataflashes
- #define DATAFLASH_CHIPCS_DDR // TODO: Replace with the DDR register name for the board's Dataflash ICs
- #define DATAFLASH_CHIPCS_PORT // TODO: Replace with the PORT register name for the board's Dataflash ICs
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Constant indicating the total number of dataflash ICs mounted on the selected board. */
- #define DATAFLASH_TOTALCHIPS 1 // TODO: Replace with the number of Dataflashes on the board, max 2
-
- /** Mask for no dataflash chip selected. */
- #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK
-
- /** Mask for the first dataflash chip selected. */
- #define DATAFLASH_CHIP1 // TODO: Replace with mask to hold /CS of first Dataflash low, and all others high
-
- /** Mask for the second dataflash chip selected. */
- #define DATAFLASH_CHIP2 // TODO: Replace with mask to hold /CS of second Dataflash low, and all others high
-
- /** Internal main memory page size for the board's dataflash ICs. */
- #define DATAFLASH_PAGE_SIZE // TODO: Replace with the page size for the Dataflash ICs
-
- /** Total number of pages inside each of the board's dataflash ICs. */
- #define DATAFLASH_PAGES // TODO: Replace with the total number of pages inside one of the Dataflash ICs
-
- /* Inline Functions: */
- /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
- * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
- */
- static inline void Dataflash_Init(void)
- {
- DATAFLASH_CHIPCS_DDR |= DATAFLASH_CHIPCS_MASK;
- DATAFLASH_CHIPCS_PORT |= DATAFLASH_CHIPCS_MASK;
- }
-
- /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
- {
- // TODO
- }
-
- /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- */
- static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SendByte(const uint8_t Byte)
- {
- // TODO
- }
-
- /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_ReceiveByte(void)
- {
- // TODO
- }
-
- /** Determines the currently selected dataflash chip.
- *
- * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
- * or a DATAFLASH_CHIPn mask (where n is the chip number).
- */
- static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_GetSelectedChip(void)
- {
- return (DATAFLASH_CHIPCS_PORT & DATAFLASH_CHIPCS_MASK);
- }
-
- /** Selects the given dataflash chip.
- *
- * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of DATAFLASH_CHIPn mask (where n is
- * the chip number).
- */
- static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SelectChip(const uint8_t ChipMask)
- {
- DATAFLASH_CHIPCS_PORT = ((DATAFLASH_CHIPCS_PORT & ~DATAFLASH_CHIPCS_MASK) | ChipMask);
- }
-
- /** Deselects the current dataflash chip, so that no dataflash is selected. */
- static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_DeselectChip(void)
- {
- Dataflash_SelectChip(DATAFLASH_NO_CHIP);
- }
-
- /** Selects a dataflash IC from the given page number, which should range from 0 to
- * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
- * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside
- * the total number of pages contained in the boards dataflash ICs, all dataflash ICs
- * are deselected.
- *
- * \param[in] PageAddress Address of the page to manipulate, ranging from
- * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
- */
- static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
- {
- Dataflash_DeselectChip();
-
- if (PageAddress >= (DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS))
- return;
-
- #if (DATAFLASH_TOTALCHIPS == 2)
- if (PageAddress & 0x01)
- Dataflash_SelectChip(DATAFLASH_CHIP2);
- else
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- #else
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- #endif
- }
-
- /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive
- * a new command.
- */
- static inline void Dataflash_ToggleSelectedChipCS(void)
- {
- uint8_t SelectedChipMask = Dataflash_GetSelectedChip();
-
- Dataflash_DeselectChip();
- Dataflash_SelectChip(SelectedChipMask);
- }
-
- /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main
- * memory page program or main memory to buffer transfer.
- */
- static inline void Dataflash_WaitWhileBusy(void)
- {
- Dataflash_ToggleSelectedChipCS();
- Dataflash_SendByte(DF_CMD_GETSTATUS);
- while (!(Dataflash_ReceiveByte() & DF_STATUS_READY));
- Dataflash_ToggleSelectedChipCS();
- }
-
- /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
- * dataflash commands which require a complete 24-bit address.
- *
- * \param[in] PageAddress Page address within the selected dataflash IC
- * \param[in] BufferByte Address within the dataflash's buffer
- */
- static inline void Dataflash_SendAddressBytes(uint16_t PageAddress, const uint16_t BufferByte)
- {
- #if (DATAFLASH_TOTALCHIPS == 2)
- PageAddress >>= 1;
- #endif
-
- Dataflash_SendByte(PageAddress >> 5);
- Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8));
- Dataflash_SendByte(BufferByte);
- }
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/Joystick.h b/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/Joystick.h deleted file mode 100644 index 31c79d9eb..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/Joystick.h +++ /dev/null @@ -1,102 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief LUFA Custom Board Joystick Hardware Driver (Template)
- *
- * This is a stub driver header file, for implementing custom board
- * layout hardware with compatible LUFA board specific drivers. If
- * the library is configured to use the BOARD_USER board mode, this
- * driver file should be completed and copied into the "/Board/" folder
- * inside the application's folder.
- *
- * This stub is for the board-specific component of the LUFA Joystick
- * driver, for a digital four-way (plus button) joystick.
-*/
-
-#ifndef __JOYSTICK_USER_H__
-#define __JOYSTICK_USER_H__
-
- /* Includes: */
- // TODO: Add any required includes here
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_JOYSTICK_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask for the joystick being pushed in the left direction. */
- #define JOY_LEFT // TODO: Add mask to indicate joystick left position here
-
- /** Mask for the joystick being pushed in the right direction. */
- #define JOY_RIGHT // TODO: Add mask to indicate joystick right position here
-
- /** Mask for the joystick being pushed in the upward direction. */
- #define JOY_UP // TODO: Add mask to indicate joystick up position here
-
- /** Mask for the joystick being pushed in the downward direction. */
- #define JOY_DOWN // TODO: Add mask to indicate joystick down position here
-
- /** Mask for the joystick being pushed inward. */
- #define JOY_PRESS // TODO: Add mask to indicate joystick pressed position here
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Joystick_Init(void)
- {
- // TODO: Initialize joystick port pins as inputs with pull-ups
- }
-
- static inline void Joystick_Disable(void)
- {
- // TODO: Clear the joystick pins as high impedance inputs here
- }
-
- static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Joystick_GetStatus(void)
- {
- // TODO: Return current joystick position data which can be obtained by masking against the JOY_* macros
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/LEDs.h deleted file mode 100644 index d48534632..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/DriverStubs/LEDs.h +++ /dev/null @@ -1,130 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief LUFA Custom Board LED Hardware Driver (Template)
- *
- * This is a stub driver header file, for implementing custom board
- * layout hardware with compatible LUFA board specific drivers. If
- * the library is configured to use the BOARD_USER board mode, this
- * driver file should be completed and copied into the "/Board/" folder
- * inside the application's folder.
- *
- * This stub is for the board-specific component of the LUFA LEDs driver,
- * for the LEDs (up to four) mounted on most development boards.
-*/
-
-#ifndef __LEDS_USER_H__
-#define __LEDS_USER_H__
-
- /* Includes: */
- // TODO: Add any required includes here
-
-/* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 // TODO: Add mask for first board LED here
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 // TODO: Add mask for second board LED here
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 // TODO: Add mask for third board LED here
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 // TODO: Add mask for fourth board LED here
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- // TODO: Add code to initialize LED port pins as outputs here
- }
-
- static inline void LEDs_Disable(void)
- {
- // TODO: Clear the LED port pins as high impedance inputs here
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- // TODO: Add code to turn on LEDs given in the LEDMask mask here, leave others as-is
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- // TODO: Add code to turn off LEDs given in the LEDMask mask here, leave others as-is
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- // TODO: Add code to turn on only LEDs given in the LEDMask mask here, all others off
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask)
- {
- // TODO: Add code to set the Leds in the given LEDMask to the status given in ActiveMask here
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- // TODO: Add code to toggle the Leds in the given LEDMask, ignoring all others
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- // TODO: Add code to return the current LEDs status' here which can be masked against LED_LED* macros
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/LUFAConfig.h b/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/LUFAConfig.h deleted file mode 100644 index 6c98d03a4..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/LUFAConfig.h +++ /dev/null @@ -1,167 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief LUFA Library Configuration Header File (Template)
- *
- * This is a header file which can be used to configure LUFA's
- * compile time options, as an alternative to the compile time
- * constants supplied through a makefile. To use this configuration
- * header, copy this into your project's root directory and supply
- * the \c USE_LUFA_CONFIG_HEADER token to the compiler so that it is
- * defined in all compiled source files.
- *
- * For information on what each token does, refer to the LUFA
- * manual section "Summary of Compile Tokens".
- */
-
-#ifndef __LUFA_CONFIG_H__
-#define __LUFA_CONFIG_H__
-
- #if (ARCH == ARCH_AVR8)
-
- /* Non-USB Related Configuration Tokens: */
-// #define DISABLE_TERMINAL_CODES
-
- /* USB Class Driver Related Tokens: */
-// #define HID_HOST_BOOT_PROTOCOL_ONLY
-// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
-// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
-// #define HID_MAX_COLLECTIONS {Insert Value Here}
-// #define HID_MAX_REPORTITEMS {Insert Value Here}
-// #define HID_MAX_REPORT_IDS {Insert Value Here}
-// #define NO_CLASS_DRIVER_AUTOFLUSH
-
- /* General USB Driver Related Tokens: */
-// #define ORDERED_EP_CONFIG
-// #define USE_STATIC_OPTIONS {Insert Value Here}
-// #define USB_DEVICE_ONLY
-// #define USB_HOST_ONLY
-// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
-// #define NO_LIMITED_CONTROLLER_CONNECT
-// #define NO_SOF_EVENTS
-
- /* USB Device Mode Driver Related Tokens: */
-// #define USE_RAM_DESCRIPTORS
-// #define USE_FLASH_DESCRIPTORS
-// #define USE_EEPROM_DESCRIPTORS
-// #define NO_INTERNAL_SERIAL
-// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
-// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
-// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
-// #define CONTROL_ONLY_DEVICE
-// #define INTERRUPT_CONTROL_ENDPOINT
-// #define NO_DEVICE_REMOTE_WAKEUP
-// #define NO_DEVICE_SELF_POWER
-
- /* USB Host Mode Driver Related Tokens: */
-// #define HOST_STATE_AS_GPIOR {Insert Value Here}
-// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
-// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
-// #define NO_AUTO_VBUS_MANAGEMENT
-// #define INVERTED_VBUS_ENABLE_LINE
-
- #elif (ARCH == ARCH_XMEGA)
-
- /* Non-USB Related Configuration Tokens: */
-// #define DISABLE_TERMINAL_CODES
-
- /* USB Class Driver Related Tokens: */
-// #define HID_HOST_BOOT_PROTOCOL_ONLY
-// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
-// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
-// #define HID_MAX_COLLECTIONS {Insert Value Here}
-// #define HID_MAX_REPORTITEMS {Insert Value Here}
-// #define HID_MAX_REPORT_IDS {Insert Value Here}
-// #define NO_CLASS_DRIVER_AUTOFLUSH
-
- /* General USB Driver Related Tokens: */
-// #define USE_STATIC_OPTIONS {Insert Value Here}
-// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
-// #define NO_LIMITED_CONTROLLER_CONNECT
-// #define NO_SOF_EVENTS
-
- /* USB Device Mode Driver Related Tokens: */
-// #define USE_RAM_DESCRIPTORS
-// #define USE_FLASH_DESCRIPTORS
-// #define USE_EEPROM_DESCRIPTORS
-// #define NO_INTERNAL_SERIAL
-// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
-// #define DEVICE_STATE_AS_GPIOR {Insert Value Here}
-// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
-// #define CONTROL_ONLY_DEVICE
-// #define MAX_ENDPOINT_INDEX {Insert Value Here}
-// #define NO_DEVICE_REMOTE_WAKEUP
-// #define NO_DEVICE_SELF_POWER
-
- #elif (ARCH == ARCH_UC3)
-
- /* Non-USB Related Configuration Tokens: */
-// #define DISABLE_TERMINAL_CODES
-
- /* USB Class Driver Related Tokens: */
-// #define HID_HOST_BOOT_PROTOCOL_ONLY
-// #define HID_STATETABLE_STACK_DEPTH {Insert Value Here}
-// #define HID_USAGE_STACK_DEPTH {Insert Value Here}
-// #define HID_MAX_COLLECTIONS {Insert Value Here}
-// #define HID_MAX_REPORTITEMS {Insert Value Here}
-// #define HID_MAX_REPORT_IDS {Insert Value Here}
-// #define NO_CLASS_DRIVER_AUTOFLUSH
-
- /* General USB Driver Related Tokens: */
-// #define ORDERED_EP_CONFIG
-// #define USE_STATIC_OPTIONS {Insert Value Here}
-// #define USB_DEVICE_ONLY
-// #define USB_HOST_ONLY
-// #define USB_STREAM_TIMEOUT_MS {Insert Value Here}
-// #define NO_SOF_EVENTS
-
- /* USB Device Mode Driver Related Tokens: */
-// #define NO_INTERNAL_SERIAL
-// #define FIXED_CONTROL_ENDPOINT_SIZE {Insert Value Here}
-// #define FIXED_NUM_CONFIGURATIONS {Insert Value Here}
-// #define CONTROL_ONLY_DEVICE
-// #define INTERRUPT_CONTROL_ENDPOINT
-// #define NO_DEVICE_REMOTE_WAKEUP
-// #define NO_DEVICE_SELF_POWER
-
- /* USB Host Mode Driver Related Tokens: */
-// #define USB_HOST_TIMEOUT_MS {Insert Value Here}
-// #define HOST_DEVICE_SETTLE_DELAY_MS {Insert Value Here}
-// #define NO_AUTO_VBUS_MANAGEMENT
-// #define INVERTED_VBUS_ENABLE_LINE
-
- #else
-
- #error Unsupported architecture for this LUFA configuration file.
-
- #endif
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/makefile_template b/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/makefile_template deleted file mode 100644 index ae6cfd3e2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/CodeTemplates/makefile_template +++ /dev/null @@ -1,36 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-# --------------------------------------
-# LUFA Project Makefile.
-# --------------------------------------
-
-MCU = at90usb1287
-ARCH = AVR8
-BOARD = USBKEY
-F_CPU = 8000000
-F_USB = $(F_CPU)
-OPTIMIZATION = s
-TARGET = Target
-SRC = $(TARGET).c $(LUFA_SRC_USB) $(LUFA_SRC_USBCLASS) $(LUFA_SRC_PLATFORM)
-LUFA_PATH = ../../LUFA
-CC_FLAGS = -DUSE_LUFA_CONFIG_HEADER -IConfig
-LD_FLAGS =
-
-# Default target
-all:
-
-# Include LUFA build script makefiles
-include $(LUFA_PATH)/Build/lufa_core.mk
-include $(LUFA_PATH)/Build/lufa_sources.mk
-include $(LUFA_PATH)/Build/lufa_build.mk
-include $(LUFA_PATH)/Build/lufa_cppcheck.mk
-include $(LUFA_PATH)/Build/lufa_doxygen.mk
-include $(LUFA_PATH)/Build/lufa_dfu.mk
-include $(LUFA_PATH)/Build/lufa_hid.mk
-include $(LUFA_PATH)/Build/lufa_avrdude.mk
-include $(LUFA_PATH)/Build/lufa_atprogram.mk
diff --git a/protocol/lufa/LUFA-120730/LUFA/Common/ArchitectureSpecific.h b/protocol/lufa/LUFA-120730/LUFA/Common/ArchitectureSpecific.h deleted file mode 100644 index 1e09edf29..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Common/ArchitectureSpecific.h +++ /dev/null @@ -1,177 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Architecture specific definitions relating to specific processor architectures.
- *
- * \copydetails Group_ArchitectureSpecific
- *
- * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
- * functionality.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_ArchitectureSpecific Architecture Specific Definitions
- * \brief Architecture specific definitions relating to specific processor architectures.
- *
- * Architecture specific macros, functions and other definitions, which relate to specific architectures. This
- * definitions may or may not be available in some form on other architectures, and thus should be protected by
- * preprocessor checks in portable code to prevent compile errors.
- *
- * @{
- */
-
-#ifndef __LUFA_ARCHSPEC_H__
-#define __LUFA_ARCHSPEC_H__
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if (ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA) || defined(__DOXYGEN__)
- #if (ARCH == ARCH_AVR8) || defined(__DOXYGEN__)
- /** Re-enables the AVR's JTAG bus in software, until a system reset. This will re-enable JTAG debugging
- * interface after is has been disabled in software via \ref JTAG_DISABLE().
- *
- * \note This macro is not available for all architectures.
- */
- #define JTAG_ENABLE() MACROS{ \
- __asm__ __volatile__ ( \
- "in __tmp_reg__,__SREG__" "\n\t" \
- "cli" "\n\t" \
- "out %1, %0" "\n\t" \
- "out __SREG__, __tmp_reg__" "\n\t" \
- "out %1, %0" "\n\t" \
- : \
- : "r" (MCUCR & ~(1 << JTD)), \
- "M" (_SFR_IO_ADDR(MCUCR)) \
- : "r0"); \
- }MACROE
-
- /** Disables the AVR's JTAG bus in software, until a system reset. This will override the current JTAG
- * status as set by the JTAGEN fuse, disabling JTAG debugging and reverting the JTAG pins back to GPIO
- * mode.
- *
- * \note This macro is not available for all architectures.
- */
- #define JTAG_DISABLE() MACROS{ \
- __asm__ __volatile__ ( \
- "in __tmp_reg__,__SREG__" "\n\t" \
- "cli" "\n\t" \
- "out %1, %0" "\n\t" \
- "out __SREG__, __tmp_reg__" "\n\t" \
- "out %1, %0" "\n\t" \
- : \
- : "r" (MCUCR | (1 << JTD)), \
- "M" (_SFR_IO_ADDR(MCUCR)) \
- : "r0"); \
- }MACROE
- #endif
-
- /** Defines a volatile \c NOP statement which cannot be optimized out by the compiler, and thus can always
- * be set as a breakpoint in the resulting code. Useful for debugging purposes, where the optimizer
- * removes/reorders code to the point where break points cannot reliably be set.
- *
- * \note This macro is not available for all architectures.
- */
- #define JTAG_DEBUG_POINT() __asm__ __volatile__ ("nop" ::)
-
- /** Defines an explicit JTAG break point in the resulting binary via the assembly \c BREAK statement. When
- * a JTAG is used, this causes the program execution to halt when reached until manually resumed.
- *
- * \note This macro is not available for all architectures.
- */
- #define JTAG_DEBUG_BREAK() __asm__ __volatile__ ("break" ::)
-
- /** Macro for testing condition "x" and breaking via \ref JTAG_DEBUG_BREAK() if the condition is false.
- *
- * \note This macro is not available for all architectures.
- *
- * \param[in] Condition Condition that will be evaluated.
- */
- #define JTAG_ASSERT(Condition) MACROS{ if (!(Condition)) { JTAG_DEBUG_BREAK(); } }MACROE
-
- /** Macro for testing condition \c "x" and writing debug data to the stdout stream if \c false. The stdout stream
- * must be pre-initialized before this macro is run and linked to an output device, such as the microcontroller's
- * USART peripheral.
- *
- * The output takes the form "{FILENAME}: Function {FUNCTION NAME}, Line {LINE NUMBER}: Assertion {Condition} failed."
- *
- * \note This macro is not available for all architectures.
- *
- * \param[in] Condition Condition that will be evaluated,
- */
- #define STDOUT_ASSERT(Condition) MACROS{ if (!(x)) { \
- printf_P(PSTR("%s: Function \"%s\", Line %d: " \
- "Assertion \"%s\" failed.\r\n"), \
- __FILE__, __func__, __LINE__, #Condition); } }MACROE
-
- #if !defined(pgm_read_ptr) || defined(__DOXYGEN__)
- /** Reads a pointer out of PROGMEM space on the AVR8 architecture. This is currently a wrapper for the
- * avr-libc \c pgm_read_ptr() macro with a \c void* cast, so that its value can be assigned directly
- * to a pointer variable or used in pointer arithmetic without further casting in C. In a future
- * avr-libc distribution this will be part of the standard API and will be implemented in a more formal
- * manner.
- *
- * \note This macro is not available for all architectures.
- *
- * \param[in] Address Address of the pointer to read.
- *
- * \return Pointer retrieved from PROGMEM space.
- */
- #define pgm_read_ptr(Address) (void*)pgm_read_word(Address)
- #endif
- #elif (ARCH == ARCH_UC3)
- #define JTAG_DEBUG_POINT() __asm__ __volatile__ ("nop" ::)
- #define JTAG_DEBUG_BREAK() __asm__ __volatile__ ("breakpoint" ::)
- #define JTAG_ASSERT(Condition) MACROS{ if (!(Condition)) { JTAG_DEBUG_BREAK(); } }MACROE
- #define STDOUT_ASSERT(Condition) MACROS{ if (!(x)) { \
- printf("%s: Function \"%s\", Line %d: " \
- "Assertion \"%s\" failed.\r\n"), \
- __FILE__, __func__, __LINE__, #Condition); } }MACROE
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Common/Architectures.h b/protocol/lufa/LUFA-120730/LUFA/Common/Architectures.h deleted file mode 100644 index 8941f7c0c..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Common/Architectures.h +++ /dev/null @@ -1,84 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Supported library architecture defines.
- *
- * \copydetails Group_Architectures
- *
- * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
- * functionality.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_Architectures Hardware Architectures
- * \brief Supported library architecture defines.
- *
- * Architecture macros for selecting the desired target microcontroller architecture. One of these values should be
- * defined as the value of \c ARCH in the user project makefile via the \c -D compiler switch to GCC, to select the
- * target architecture.
- *
- * The selected architecture should remain consistent with the makefile \c ARCH value, which is used to select the
- * underlying driver source files for each architecture.
- *
- * @{
- */
-
-#ifndef __LUFA_ARCHITECTURES_H__
-#define __LUFA_ARCHITECTURES_H__
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Selects the Atmel 8-bit AVR (AT90USB* and ATMEGA*U* chips) architecture. */
- #define ARCH_AVR8 0
-
- /** Selects the Atmel 32-bit UC3 AVR (AT32UC3* chips) architecture. */
- #define ARCH_UC3 1
-
- /** Selects the Atmel XMEGA AVR (ATXMEGA*U chips) architecture. */
- #define ARCH_XMEGA 2
-
- #if !defined(__DOXYGEN__)
- #define ARCH_ ARCH_AVR8
-
- #if !defined(ARCH)
- #define ARCH ARCH_AVR8
- #endif
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Common/Attributes.h b/protocol/lufa/LUFA-120730/LUFA/Common/Attributes.h deleted file mode 100644 index fce75d0ed..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Common/Attributes.h +++ /dev/null @@ -1,150 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Special function/variable attribute macros.
- *
- * \copydetails Group_FuncVarAttributes
- *
- * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
- * functionality.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_FuncVarAttributes Function/Variable Attributes
- * \brief Special function/variable attribute macros.
- *
- * This module contains macros for applying specific attributes to functions and variables to control various
- * optimizer and code generation features of the compiler. Attributes may be placed in the function prototype
- * or variable declaration in any order, and multiple attributes can be specified for a single item via a space
- * separated list.
- *
- * On incompatible versions of GCC or on other compilers, these macros evaluate to nothing unless they are
- * critical to the code's function and thus must throw a compile error when used.
- *
- * @{
- */
-
-#ifndef __LUFA_ATTR_H__
-#define __LUFA_ATTR_H__
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if (__GNUC__ >= 3) || defined(__DOXYGEN__)
- /** Indicates to the compiler that the function can not ever return, so that any stack restoring or
- * return code may be omitted by the compiler in the resulting binary.
- */
- #define ATTR_NO_RETURN __attribute__ ((noreturn))
-
- /** Indicates that the function returns a value which should not be ignored by the user code. When
- * applied, any ignored return value from calling the function will produce a compiler warning.
- */
- #define ATTR_WARN_UNUSED_RESULT __attribute__ ((warn_unused_result))
-
- /** Indicates that the specified parameters of the function are pointers which should never be \c NULL.
- * When applied as a 1-based comma separated list the compiler will emit a warning if the specified
- * parameters are known at compiler time to be \c NULL at the point of calling the function.
- */
- #define ATTR_NON_NULL_PTR_ARG(...) __attribute__ ((nonnull (__VA_ARGS__)))
-
- /** Removes any preamble or postamble from the function. When used, the function will not have any
- * register or stack saving code. This should be used with caution, and when used the programmer
- * is responsible for maintaining stack and register integrity.
- */
- #define ATTR_NAKED __attribute__ ((naked))
-
- /** Prevents the compiler from considering a specified function for in-lining. When applied, the given
- * function will not be in-lined under any circumstances.
- */
- #define ATTR_NO_INLINE __attribute__ ((noinline))
-
- /** Forces the compiler to inline the specified function. When applied, the given function will be
- * in-lined under all circumstances.
- */
- #define ATTR_ALWAYS_INLINE __attribute__ ((always_inline))
-
- /** Indicates that the specified function is pure, in that it has no side-effects other than global
- * or parameter variable access.
- */
- #define ATTR_PURE __attribute__ ((pure))
-
- /** Indicates that the specified function is constant, in that it has no side effects other than
- * parameter access.
- */
- #define ATTR_CONST __attribute__ ((const))
-
- /** Marks a given function as deprecated, which produces a warning if the function is called. */
- #define ATTR_DEPRECATED __attribute__ ((deprecated))
-
- /** Marks a function as a weak reference, which can be overridden by other functions with an
- * identical name (in which case the weak reference is discarded at link time).
- */
- #define ATTR_WEAK __attribute__ ((weak))
- #endif
-
- /** Forces the compiler to not automatically zero the given global variable on startup, so that the
- * current RAM contents is retained. Under most conditions this value will be random due to the
- * behavior of volatile memory once power is removed, but may be used in some specific circumstances,
- * like the passing of values back after a system watchdog reset.
- */
- #define ATTR_NO_INIT __attribute__ ((section (".noinit")))
-
- /** Places the function in one of the initialization sections, which execute before the main function
- * of the application. Refer to the avr-libc manual for more information on the initialization sections.
- *
- * \param[in] SectionIndex Initialization section number where the function should be placed.
- */
- #define ATTR_INIT_SECTION(SectionIndex) __attribute__ ((used, naked, section (".init" #SectionIndex )))
-
- /** Marks a function as an alias for another function.
- *
- * \param[in] Func Name of the function which the given function name should alias.
- */
- #define ATTR_ALIAS(Func) __attribute__ ((alias( #Func )))
-
- /** Marks a variable or struct element for packing into the smallest space available, omitting any
- * alignment bytes usually added between fields to optimize field accesses.
- */
- #define ATTR_PACKED __attribute__ ((packed))
-
- /** Indicates the minimum alignment in bytes for a variable or struct element.
- *
- * \param[in] Bytes Minimum number of bytes the item should be aligned to.
- */
- #define ATTR_ALIGNED(Bytes) __attribute__ ((aligned(Bytes)))
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Common/BoardTypes.h b/protocol/lufa/LUFA-120730/LUFA/Common/BoardTypes.h deleted file mode 100644 index 4c152dab2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Common/BoardTypes.h +++ /dev/null @@ -1,231 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Supported pre-made board hardware defines.
- *
- * \copydetails Group_BoardTypes
- *
- * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
- * functionality.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_BoardTypes Board Types
- * \brief Supported pre-made board hardware defines.
- *
- * Board macros for indicating the chosen physical board hardware to the library. These macros should be used when
- * defining the \c BOARD token to the chosen hardware via the \c -D switch in the project makefile. If a custom
- * board is used, the \ref BOARD_NONE or \ref BOARD_USER values should be selected.
- *
- * @{
- */
-
-#ifndef __LUFA_BOARDTYPES_H__
-#define __LUFA_BOARDTYPES_H__
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Selects the user-defined board drivers, which should be placed in the user project's folder
- * under a directory named \c /Board/. Each board driver should be named identically to the LUFA
- * master board driver (i.e., driver in the \c LUFA/Drivers/Board directory) so that the library
- * can correctly identify it.
- */
- #define BOARD_USER 0
-
- /** Disables board drivers when operation will not be adversely affected (e.g. LEDs) - use of board drivers
- * such as the Joystick driver, where the removal would adversely affect the code's operation is still disallowed. */
- #define BOARD_NONE 1
-
- /** Selects the USBKEY specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */
- #define BOARD_USBKEY 2
-
- /** Selects the STK525 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */
- #define BOARD_STK525 3
-
- /** Selects the STK526 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */
- #define BOARD_STK526 4
-
- /** Selects the RZUSBSTICK specific board drivers, including the driver for the boards LEDs. */
- #define BOARD_RZUSBSTICK 5
-
- /** Selects the ATAVRUSBRF01 specific board drivers, including the driver for the board LEDs. */
- #define BOARD_ATAVRUSBRF01 6
-
- /** Selects the BUMBLEB specific board drivers, using the officially recommended peripheral layout. */
- #define BOARD_BUMBLEB 7
-
- /** Selects the XPLAIN (Revision 2 or newer) specific board drivers, including LED and Dataflash drivers. */
- #define BOARD_XPLAIN 8
-
- /** Selects the XPLAIN (Revision 1) specific board drivers, including LED and Dataflash drivers. */
- #define BOARD_XPLAIN_REV1 9
-
- /** Selects the EVK527 specific board drivers, including Temperature, Button, Dataflash, Joystick and LED drivers. */
- #define BOARD_EVK527 10
-
- /** Selects the Teensy version 1.x specific board drivers, including the driver for the board LEDs. */
- #define BOARD_TEENSY 11
-
- /** Selects the USBTINY MKII specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_USBTINYMKII 12
-
- /** Selects the Benito specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_BENITO 13
-
- /** Selects the JM-DB-U2 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_JMDBU2 14
-
- /** Selects the Olimex AVR-USB-162 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_OLIMEX162 15
-
- /** Selects the UDIP specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_UDIP 16
-
- /** Selects the BUI specific board drivers, including the driver for the board LEDs. */
- #define BOARD_BUI 17
-
- /** Selects the Arduino Uno specific board drivers, including the driver for the board LEDs. */
- #define BOARD_UNO 18
-
- /** Selects the Busware CUL V3 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_CULV3 19
-
- /** Selects the Blackcat USB JTAG specific board drivers, including the driver for the board LEDs. */
- #define BOARD_BLACKCAT 20
-
- /** Selects the Maximus specific board drivers, including the driver for the board LEDs. */
- #define BOARD_MAXIMUS 21
-
- /** Selects the Minimus specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_MINIMUS 22
-
- /** Selects the Adafruit U4 specific board drivers, including the Button driver. */
- #define BOARD_ADAFRUITU4 23
-
- /** Selects the Microsin AVR-USB162 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_MICROSIN162 24
-
- /** Selects the Kernel Concepts USBFOO specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_USBFOO 25
-
- /** Selects the Sparkfun ATMEGA8U2 specific board drivers, including the driver for the board LEDs. */
- #define BOARD_SPARKFUN8U2 26
-
- /** Selects the Atmel EVK1101 specific board drivers, including the Button, Joystick and LED drivers. */
- #define BOARD_EVK1101 27
-
- /** Selects the Busware TUL specific board drivers, including the Button and LED drivers. */
- #define BOARD_TUL 28
-
- /** Selects the Atmel EVK1100 specific board drivers, including the Button, Joystick and LED drivers. */
- #define BOARD_EVK1100 29
-
- /** Selects the Atmel EVK1104 specific board drivers, including the Button and LED drivers. */
- #define BOARD_EVK1104 30
-
- /** Selects the Atmel XMEGA A3BU Xplained specific board drivers, including Dataflash, Button and LED drivers. */
- #define BOARD_A3BU_XPLAINED 31
-
- /** Selects the Teensy version 2.x specific board drivers, including the driver for the board LEDs. */
- #define BOARD_TEENSY2 32
-
- /** Selects the USB2AX version 1 and 2 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_USB2AX 33
-
- /** Selects the USB2AX version 3 specific board drivers, including the Button and LEDs drivers. */
- #define BOARD_USB2AX_V3 34
-
- /** Selects the Micropendous 32U2 specific board drivers, including the Button and LED drivers. */
- #define BOARD_MICROPENDOUS_32U2 35
-
- /** Selects the Micropendous A specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_A 36
-
- /** Selects the Micropendous 1 specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_1 37
-
- /** Selects the Micropendous 2 specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_2 38
-
- /** Selects the Micropendous 3 specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_3 39
-
- /** Selects the Micropendous 4 specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_4 40
-
- /** Selects the Micropendous DIP specific board drivers, including the driver for the board Button. */
- #define BOARD_MICROPENDOUS_DIP 41
-
- /** Selects the Micropendous (Arduino-like) revision 1 specific board drivers, including the Button and LED drivers. */
- #define BOARD_MICROPENDOUS_REV1 42
-
- /** Selects the Micropendous (Arduino-like) revision 2 specific board drivers, including the Button and LED drivers. */
- #define BOARD_MICROPENDOUS_REV2 43
-
- /** Selects the XMEGA B1 Xplained specific board drivers, including the Button and LED drivers. */
- #define BOARD_B1_XPLAINED 44
-
- /** Selects the Bitwizard Multio specific board drivers, including the driver for the board LEDs. */
- #define BOARD_MULTIO 45
-
- /** Selects the Bitwizard Big-Multio specific board drivers, including the driver for the board LEDs. */
- #define BOARD_BIGMULTIO 46
-
- /** Selects the DorkbotPDX Duce specific board drivers, including the driver for the board LEDs. */
- #define BOARD_DUCE 47
-
- /** Selects the Olimex AVR-USB-32U4 specific board drivers, including the Button and LED drivers. */
- #define BOARD_OLIMEX32U4 48
-
- /** Selects the Olimex AVR-USB-T32U4 specific board drivers, including the Button and LED drivers. */
- #define BOARD_OLIMEXT32U4 49
-
- /** Selects the Olimex AVR-ISP-MK2 specific board drivers, including the Button and LED drivers. */
- #define BOARD_OLIMEXISPMK2 50
-
-
- #if !defined(__DOXYGEN__)
- #define BOARD_ BOARD_NONE
-
- #if !defined(BOARD)
- #define BOARD BOARD_NONE
- #endif
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Common/Common.h b/protocol/lufa/LUFA-120730/LUFA/Common/Common.h deleted file mode 100644 index cf1f49b9d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Common/Common.h +++ /dev/null @@ -1,381 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \dir
- * \brief Common library header files.
- *
- * This folder contains header files which are common to all parts of the LUFA library. They may be used freely in
- * user applications.
- */
-
-/** \file
- * \brief Common library convenience headers, macros and functions.
- *
- * \copydetails Group_Common
- */
-
-/** \defgroup Group_Common Common Utility Headers - LUFA/Drivers/Common/Common.h
- * \brief Common library convenience headers, macros and functions.
- *
- * Common utility headers containing macros, functions, enums and types which are common to all
- * aspects of the library.
- *
- * @{
- */
-
-/** \defgroup Group_GlobalInt Global Interrupt Macros
- * \brief Convenience macros for the management of interrupts globally within the device.
- *
- * Macros and functions to create and control global interrupts within the device.
- */
-
-#ifndef __LUFA_COMMON_H__
-#define __LUFA_COMMON_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_COMMON_H
-
- /* Includes: */
- #include <stdint.h>
- #include <stdbool.h>
- #include <string.h>
- #include <stddef.h>
-
- #include "Architectures.h"
- #include "BoardTypes.h"
- #include "ArchitectureSpecific.h"
- #include "CompilerSpecific.h"
- #include "Attributes.h"
-
- #if defined(USE_LUFA_CONFIG_HEADER)
- #include "LUFAConfig.h"
- #endif
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Architecture specific utility includes: */
- #if defined(__DOXYGEN__)
- /** Type define for an unsigned integer the same width as the selected architecture's machine register.
- * This is distinct from the non-specific standard int data type, whose width is machine dependant but
- * which may not reflect the actual machine register width on some targets (e.g. AVR8).
- */
- typedef MACHINE_REG_t uint_reg_t;
- #elif (ARCH == ARCH_AVR8)
- #include <avr/io.h>
- #include <avr/interrupt.h>
- #include <avr/pgmspace.h>
- #include <avr/eeprom.h>
- #include <avr/boot.h>
- #include <math.h>
- #include <util/delay.h>
-
- typedef uint8_t uint_reg_t;
-
- #define ARCH_HAS_EEPROM_ADDRESS_SPACE
- #define ARCH_HAS_FLASH_ADDRESS_SPACE
- #define ARCH_HAS_MULTI_ADDRESS_SPACE
- #define ARCH_LITTLE_ENDIAN
-
- #include "Endianness.h"
- #elif (ARCH == ARCH_UC3)
- #include <avr32/io.h>
- #include <math.h>
-
- // === TODO: Find abstracted way to handle these ===
- #define PROGMEM
- #define pgm_read_byte(x) *x
- #define memcmp_P(...) memcmp(__VA_ARGS__)
- #define memcpy_P(...) memcpy(__VA_ARGS__)
- // =================================================
-
- typedef uint32_t uint_reg_t;
-
- #define ARCH_BIG_ENDIAN
-
- #include "Endianness.h"
- #elif (ARCH == ARCH_XMEGA)
- #include <avr/io.h>
- #include <avr/interrupt.h>
- #include <avr/pgmspace.h>
- #include <avr/eeprom.h>
- #include <math.h>
- #include <util/delay.h>
-
- typedef uint8_t uint_reg_t;
-
- #define ARCH_HAS_EEPROM_ADDRESS_SPACE
- #define ARCH_HAS_FLASH_ADDRESS_SPACE
- #define ARCH_HAS_MULTI_ADDRESS_SPACE
- #define ARCH_LITTLE_ENDIAN
-
- #include "Endianness.h"
- #else
- #error Unknown device architecture specified.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Macro for encasing other multi-statement macros. This should be used along with an opening brace
- * before the start of any multi-statement macro, so that the macros contents as a whole are treated
- * as a discrete block and not as a list of separate statements which may cause problems when used as
- * a block (such as inline \c if statements).
- */
- #define MACROS do
-
- /** Macro for encasing other multi-statement macros. This should be used along with a preceding closing
- * brace at the end of any multi-statement macro, so that the macros contents as a whole are treated
- * as a discrete block and not as a list of separate statements which may cause problems when used as
- * a block (such as inline \c if statements).
- */
- #define MACROE while (0)
-
- /** Convenience macro to determine the larger of two values.
- *
- * \attention This macro should only be used with operands that do not have side effects from being evaluated
- * multiple times.
- *
- * \param[in] x First value to compare
- * \param[in] y First value to compare
- *
- * \return The larger of the two input parameters
- */
- #if !defined(MAX) || defined(__DOXYGEN__)
- #define MAX(x, y) (((x) > (y)) ? (x) : (y))
- #endif
-
- /** Convenience macro to determine the smaller of two values.
- *
- * \attention This macro should only be used with operands that do not have side effects from being evaluated
- * multiple times.
- *
- * \param[in] x First value to compare
- * \param[in] y First value to compare
- *
- * \return The smaller of the two input parameters
- */
- #if !defined(MIN) || defined(__DOXYGEN__)
- #define MIN(x, y) (((x) < (y)) ? (x) : (y))
- #endif
-
- #if !defined(STRINGIFY) || defined(__DOXYGEN__)
- /** Converts the given input into a string, via the C Preprocessor. This macro puts literal quotation
- * marks around the input, converting the source into a string literal.
- *
- * \param[in] x Input to convert into a string literal.
- *
- * \return String version of the input.
- */
- #define STRINGIFY(x) #x
-
- /** Converts the given input into a string after macro expansion, via the C Preprocessor. This macro puts
- * literal quotation marks around the expanded input, converting the source into a string literal.
- *
- * \param[in] x Input to expand and convert into a string literal.
- *
- * \return String version of the expanded input.
- */
- #define STRINGIFY_EXPANDED(x) STRINGIFY(x)
- #endif
-
- #if !defined(ISR) || defined(__DOXYGEN__)
- /** Macro for the definition of interrupt service routines, so that the compiler can insert the required
- * prologue and epilogue code to properly manage the interrupt routine without affecting the main thread's
- * state with unintentional side-effects.
- *
- * Interrupt handlers written using this macro may still need to be registered with the microcontroller's
- * Interrupt Controller (if present) before they will properly handle incoming interrupt events.
- *
- * \note This macro is only supplied on some architectures, where the standard library does not include a valid
- * definition. If an existing definition exists, the alternative definition here will be ignored.
- *
- * \ingroup Group_GlobalInt
- *
- * \param[in] Name Unique name of the interrupt service routine.
- */
- #define ISR(Name, ...) void Name (void) __attribute__((__interrupt__)) __VA_ARGS__; void Name (void)
- #endif
-
- /* Inline Functions: */
- /** Function to reverse the individual bits in a byte - i.e. bit 7 is moved to bit 0, bit 6 to bit 1,
- * etc.
- *
- * \param[in] Byte Byte of data whose bits are to be reversed.
- *
- * \return Input data with the individual bits reversed (mirrored).
- */
- static inline uint8_t BitReverse(uint8_t Byte) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
- static inline uint8_t BitReverse(uint8_t Byte)
- {
- Byte = (((Byte & 0xF0) >> 4) | ((Byte & 0x0F) << 4));
- Byte = (((Byte & 0xCC) >> 2) | ((Byte & 0x33) << 2));
- Byte = (((Byte & 0xAA) >> 1) | ((Byte & 0x55) << 1));
-
- return Byte;
- }
-
- /** Function to perform a blocking delay for a specified number of milliseconds. The actual delay will be
- * at a minimum the specified number of milliseconds, however due to loop overhead and internal calculations
- * may be slightly higher.
- *
- * \param[in] Milliseconds Number of milliseconds to delay
- */
- static inline void Delay_MS(uint16_t Milliseconds) ATTR_ALWAYS_INLINE;
- static inline void Delay_MS(uint16_t Milliseconds)
- {
- #if (ARCH == ARCH_AVR8)
- if (GCC_IS_COMPILE_CONST(Milliseconds))
- {
- _delay_ms(Milliseconds);
- }
- else
- {
- while (Milliseconds--)
- _delay_ms(1);
- }
- #elif (ARCH == ARCH_UC3)
- while (Milliseconds--)
- {
- __builtin_mtsr(AVR32_COUNT, 0);
- while ((uint32_t)__builtin_mfsr(AVR32_COUNT) < (F_CPU / 1000));
- }
- #elif (ARCH == ARCH_XMEGA)
- if (GCC_IS_COMPILE_CONST(Milliseconds))
- {
- _delay_ms(Milliseconds);
- }
- else
- {
- while (Milliseconds--)
- _delay_ms(1);
- }
- #endif
- }
-
- /** Retrieves a mask which contains the current state of the global interrupts for the device. This
- * value can be stored before altering the global interrupt enable state, before restoring the
- * flag(s) back to their previous values after a critical section using \ref SetGlobalInterruptMask().
- *
- * \ingroup Group_GlobalInt
- *
- * \return Mask containing the current Global Interrupt Enable Mask bit(s).
- */
- static inline uint_reg_t GetGlobalInterruptMask(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint_reg_t GetGlobalInterruptMask(void)
- {
- GCC_MEMORY_BARRIER();
-
- #if (ARCH == ARCH_AVR8)
- return SREG;
- #elif (ARCH == ARCH_UC3)
- return __builtin_mfsr(AVR32_SR);
- #elif (ARCH == ARCH_XMEGA)
- return SREG;
- #endif
- }
-
- /** Sets the global interrupt enable state of the microcontroller to the mask passed into the function.
- * This can be combined with \ref GetGlobalInterruptMask() to save and restore the Global Interrupt Enable
- * Mask bit(s) of the device after a critical section has completed.
- *
- * \ingroup Group_GlobalInt
- *
- * \param[in] GlobalIntState Global Interrupt Enable Mask value to use
- */
- static inline void SetGlobalInterruptMask(const uint_reg_t GlobalIntState) ATTR_ALWAYS_INLINE;
- static inline void SetGlobalInterruptMask(const uint_reg_t GlobalIntState)
- {
- GCC_MEMORY_BARRIER();
-
- #if (ARCH == ARCH_AVR8)
- SREG = GlobalIntState;
- #elif (ARCH == ARCH_UC3)
- if (GlobalIntState & AVR32_SR_GM)
- __builtin_ssrf(AVR32_SR_GM_OFFSET);
- else
- __builtin_csrf(AVR32_SR_GM_OFFSET);
- #elif (ARCH == ARCH_XMEGA)
- SREG = GlobalIntState;
- #endif
-
- GCC_MEMORY_BARRIER();
- }
-
- /** Enables global interrupt handling for the device, allowing interrupts to be handled.
- *
- * \ingroup Group_GlobalInt
- */
- static inline void GlobalInterruptEnable(void) ATTR_ALWAYS_INLINE;
- static inline void GlobalInterruptEnable(void)
- {
- GCC_MEMORY_BARRIER();
-
- #if (ARCH == ARCH_AVR8)
- sei();
- #elif (ARCH == ARCH_UC3)
- __builtin_csrf(AVR32_SR_GM_OFFSET);
- #elif (ARCH == ARCH_XMEGA)
- sei();
- #endif
-
- GCC_MEMORY_BARRIER();
- }
-
- /** Disabled global interrupt handling for the device, preventing interrupts from being handled.
- *
- * \ingroup Group_GlobalInt
- */
- static inline void GlobalInterruptDisable(void) ATTR_ALWAYS_INLINE;
- static inline void GlobalInterruptDisable(void)
- {
- GCC_MEMORY_BARRIER();
-
- #if (ARCH == ARCH_AVR8)
- cli();
- #elif (ARCH == ARCH_UC3)
- __builtin_ssrf(AVR32_SR_GM_OFFSET);
- #elif (ARCH == ARCH_XMEGA)
- cli();
- #endif
-
- GCC_MEMORY_BARRIER();
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Common/CompilerSpecific.h b/protocol/lufa/LUFA-120730/LUFA/Common/CompilerSpecific.h deleted file mode 100644 index 22afe940b..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Common/CompilerSpecific.h +++ /dev/null @@ -1,97 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Compiler specific definitions for code optimization and correctness.
- *
- * \copydetails Group_CompilerSpecific
- *
- * \note Do not include this file directly, rather include the Common.h header file instead to gain this file's
- * functionality.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_CompilerSpecific Compiler Specific Definitions
- * \brief Compiler specific definitions for code optimization and correctness.
- *
- * Compiler specific definitions to expose certain compiler features which may increase the level of code optimization
- * for a specific compiler, or correct certain issues that may be present such as memory barriers for use in conjunction
- * with atomic variable access.
- *
- * Where possible, on alternative compilers, these macros will either have no effect, or default to returning a sane value
- * so that they can be used in existing code without the need for extra compiler checks in the user application code.
- *
- * @{
- */
-
-#ifndef __LUFA_COMPILERSPEC_H__
-#define __LUFA_COMPILERSPEC_H__
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if defined(__GNUC__) || defined(__DOXYGEN__)
- /** Forces GCC to use pointer indirection (via the device's pointer register pairs) when accessing the given
- * struct pointer. In some cases GCC will emit non-optimal assembly code when accessing a structure through
- * a pointer, resulting in a larger binary. When this macro is used on a (non \c const) structure pointer before
- * use, it will force GCC to use pointer indirection on the elements rather than direct store and load
- * instructions.
- *
- * \param[in, out] StructPtr Pointer to a structure which is to be forced into indirect access mode.
- */
- #define GCC_FORCE_POINTER_ACCESS(StructPtr) __asm__ __volatile__("" : "=b" (StructPtr) : "0" (StructPtr))
-
- /** Forces GCC to create a memory barrier, ensuring that memory accesses are not reordered past the barrier point.
- * This can be used before ordering-critical operations, to ensure that the compiler does not re-order the resulting
- * assembly output in an unexpected manner on sections of code that are ordering-specific.
- */
- #define GCC_MEMORY_BARRIER() __asm__ __volatile__("" ::: "memory");
-
- /** Determines if the specified value can be determined at compile-time to be a constant value when compiling under GCC.
- *
- * \param[in] x Value to check compile-time constantness of.
- *
- * \return Boolean true if the given value is known to be a compile time constant, false otherwise.
- */
- #define GCC_IS_COMPILE_CONST(x) __builtin_constant_p(x)
- #else
- #define GCC_FORCE_POINTER_ACCESS(StructPtr)
- #define GCC_MEMORY_BARRIER()
- #define GCC_IS_COMPILE_CONST(x) 0
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Common/Endianness.h b/protocol/lufa/LUFA-120730/LUFA/Common/Endianness.h deleted file mode 100644 index d0812e4e3..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Common/Endianness.h +++ /dev/null @@ -1,489 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Endianness and Byte Ordering macros and functions.
- *
- * \copydetails Group_Endianness
- */
-
-/** \ingroup Group_Endianness
- * \defgroup Group_ByteSwapping Byte Reordering
- * \brief Macros and functions for forced byte reordering.
- */
-
-/** \ingroup Group_Endianness
- * \defgroup Group_EndianConversion Endianness Conversion
- * \brief Macros and functions for automatic endianness conversion.
- */
-
-/** \ingroup Group_Common
- * \defgroup Group_Endianness Endianness and Byte Ordering
- * \brief Convenience macros and functions relating to byte (re-)ordering
- *
- * Common library convenience macros and functions relating to byte (re-)ordering.
- *
- * @{
- */
-
-#ifndef __LUFA_ENDIANNESS_H__
-#define __LUFA_ENDIANNESS_H__
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_COMMON_H)
- #error Do not include this file directly. Include LUFA/Common/Common.h instead to gain this functionality.
- #endif
-
- #if !(defined(ARCH_BIG_ENDIAN) || defined(ARCH_LITTLE_ENDIAN))
- #error ARCH_BIG_ENDIAN or ARCH_LITTLE_ENDIAN not set for the specified architecture.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Swaps the byte ordering of a 16-bit value at compile-time. Do not use this macro for swapping byte orderings
- * of dynamic values computed at runtime, use \ref SwapEndian_16() instead. The result of this macro can be used
- * inside struct or other variable initializers outside of a function, something that is not possible with the
- * inline function variant.
- *
- * \ingroup Group_ByteSwapping
- *
- * \param[in] x 16-bit value whose byte ordering is to be swapped.
- *
- * \return Input value with the byte ordering reversed.
- */
- #define SWAPENDIAN_16(x) (uint16_t)((((x) & 0xFF00) >> 8) | (((x) & 0x00FF) << 8))
-
- /** Swaps the byte ordering of a 32-bit value at compile-time. Do not use this macro for swapping byte orderings
- * of dynamic values computed at runtime- use \ref SwapEndian_32() instead. The result of this macro can be used
- * inside struct or other variable initializers outside of a function, something that is not possible with the
- * inline function variant.
- *
- * \ingroup Group_ByteSwapping
- *
- * \param[in] x 32-bit value whose byte ordering is to be swapped.
- *
- * \return Input value with the byte ordering reversed.
- */
- #define SWAPENDIAN_32(x) (uint32_t)((((x) & 0xFF000000UL) >> 24UL) | (((x) & 0x00FF0000UL) >> 8UL) | \
- (((x) & 0x0000FF00UL) << 8UL) | (((x) & 0x000000FFUL) << 24UL))
-
- #if defined(ARCH_BIG_ENDIAN) && !defined(le16_to_cpu)
- #define le16_to_cpu(x) SwapEndian_16(x)
- #define le32_to_cpu(x) SwapEndian_32(x)
- #define be16_to_cpu(x) (x)
- #define be32_to_cpu(x) (x)
- #define cpu_to_le16(x) SwapEndian_16(x)
- #define cpu_to_le32(x) SwapEndian_32(x)
- #define cpu_to_be16(x) (x)
- #define cpu_to_be32(x) (x)
- #define LE16_TO_CPU(x) SWAPENDIAN_16(x)
- #define LE32_TO_CPU(x) SWAPENDIAN_32(x)
- #define BE16_TO_CPU(x) (x)
- #define BE32_TO_CPU(x) (x)
- #define CPU_TO_LE16(x) SWAPENDIAN_16(x)
- #define CPU_TO_LE32(x) SWAPENDIAN_32(x)
- #define CPU_TO_BE16(x) (x)
- #define CPU_TO_BE32(x) (x)
- #elif !defined(le16_to_cpu)
- /** \name Run-time endianness conversion */
- //@{
-
- /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref LE16_TO_CPU instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define le16_to_cpu(x) (x)
-
- /** Performs a conversion between a Little Endian encoded 32-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref LE32_TO_CPU instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define le32_to_cpu(x) (x)
-
- /** Performs a conversion between a Big Endian encoded 16-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref BE16_TO_CPU instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define be16_to_cpu(x) SwapEndian_16(x)
-
- /** Performs a conversion between a Big Endian encoded 32-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref BE32_TO_CPU instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define be32_to_cpu(x) SwapEndian_32(x)
-
- /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it
- * is in Little Endian format regardless of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref CPU_TO_LE16 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define cpu_to_le16(x) (x)
-
- /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it
- * is in Little Endian format regardless of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref CPU_TO_LE32 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define cpu_to_le32(x) (x)
-
- /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it
- * is in Big Endian format regardless of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref CPU_TO_BE16 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define cpu_to_be16(x) SwapEndian_16(x)
-
- /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it
- * is in Big Endian format regardless of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for run-time conversion of data - for compile-time endianness
- * conversion, use \ref CPU_TO_BE32 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define cpu_to_be32(x) SwapEndian_32(x)
-
- //@}
-
- /** \name Compile-time endianness conversion */
- //@{
-
- /** Performs a conversion between a Little Endian encoded 16-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run time endianness
- * conversion, use \ref le16_to_cpu instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define LE16_TO_CPU(x) (x)
-
- /** Performs a conversion between a Little Endian encoded 32-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run time endianness
- * conversion, use \ref le32_to_cpu instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define LE32_TO_CPU(x) (x)
-
- /** Performs a conversion between a Big Endian encoded 16-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref be16_to_cpu instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define BE16_TO_CPU(x) SWAPENDIAN_16(x)
-
- /** Performs a conversion between a Big Endian encoded 32-bit piece of data and the
- * Endianness of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref be32_to_cpu instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define BE32_TO_CPU(x) SWAPENDIAN_32(x)
-
- /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it
- * is in Little Endian format regardless of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref cpu_to_le16 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define CPU_TO_LE16(x) (x)
-
- /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it
- * is in Little Endian format regardless of the currently selected CPU architecture.
- *
- * On little endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref cpu_to_le32 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define CPU_TO_LE32(x) (x)
-
- /** Performs a conversion on a natively encoded 16-bit piece of data to ensure that it
- * is in Big Endian format regardless of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref cpu_to_be16 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define CPU_TO_BE16(x) SWAPENDIAN_16(x)
-
- /** Performs a conversion on a natively encoded 32-bit piece of data to ensure that it
- * is in Big Endian format regardless of the currently selected CPU architecture.
- *
- * On big endian architectures, this macro does nothing.
- *
- * \note This macro is designed for compile-time conversion of data - for run-time endianness
- * conversion, use \ref cpu_to_be32 instead.
- *
- * \ingroup Group_EndianConversion
- *
- * \param[in] x Data to perform the endianness conversion on.
- *
- * \return Endian corrected version of the input value.
- */
- #define CPU_TO_BE32(x) SWAPENDIAN_32(x)
-
- //! @}
- #endif
-
- /* Inline Functions: */
- /** Function to reverse the byte ordering of the individual bytes in a 16 bit value.
- *
- * \ingroup Group_ByteSwapping
- *
- * \param[in] Word Word of data whose bytes are to be swapped.
- *
- * \return Input data with the individual bytes reversed.
- */
- static inline uint16_t SwapEndian_16(const uint16_t Word) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
- static inline uint16_t SwapEndian_16(const uint16_t Word)
- {
- if (GCC_IS_COMPILE_CONST(Word))
- return SWAPENDIAN_16(Word);
-
- uint8_t Temp;
-
- union
- {
- uint16_t Word;
- uint8_t Bytes[2];
- } Data;
-
- Data.Word = Word;
-
- Temp = Data.Bytes[0];
- Data.Bytes[0] = Data.Bytes[1];
- Data.Bytes[1] = Temp;
-
- return Data.Word;
- }
-
- /** Function to reverse the byte ordering of the individual bytes in a 32 bit value.
- *
- * \ingroup Group_ByteSwapping
- *
- * \param[in] DWord Double word of data whose bytes are to be swapped.
- *
- * \return Input data with the individual bytes reversed.
- */
- static inline uint32_t SwapEndian_32(const uint32_t DWord) ATTR_WARN_UNUSED_RESULT ATTR_CONST;
- static inline uint32_t SwapEndian_32(const uint32_t DWord)
- {
- if (GCC_IS_COMPILE_CONST(DWord))
- return SWAPENDIAN_32(DWord);
-
- uint8_t Temp;
-
- union
- {
- uint32_t DWord;
- uint8_t Bytes[4];
- } Data;
-
- Data.DWord = DWord;
-
- Temp = Data.Bytes[0];
- Data.Bytes[0] = Data.Bytes[3];
- Data.Bytes[3] = Temp;
-
- Temp = Data.Bytes[1];
- Data.Bytes[1] = Data.Bytes[2];
- Data.Bytes[2] = Temp;
-
- return Data.DWord;
- }
-
- /** Function to reverse the byte ordering of the individual bytes in a n byte value.
- *
- * \ingroup Group_ByteSwapping
- *
- * \param[in,out] Data Pointer to a number containing an even number of bytes to be reversed.
- * \param[in] Length Length of the data in bytes.
- *
- * \return Input data with the individual bytes reversed.
- */
- static inline void SwapEndian_n(void* const Data,
- uint8_t Length) ATTR_NON_NULL_PTR_ARG(1);
- static inline void SwapEndian_n(void* const Data,
- uint8_t Length)
- {
- uint8_t* CurrDataPos = (uint8_t*)Data;
-
- while (Length > 1)
- {
- uint8_t Temp = *CurrDataPos;
- *CurrDataPos = *(CurrDataPos + Length - 1);
- *(CurrDataPos + Length - 1) = Temp;
-
- CurrDataPos++;
- Length -= 2;
- }
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Doxygen.conf b/protocol/lufa/LUFA-120730/LUFA/Doxygen.conf deleted file mode 100644 index 89b2a3327..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Doxygen.conf +++ /dev/null @@ -1,1809 +0,0 @@ -# Doxyfile 1.8.1.2
-
-# This file describes the settings to be used by the documentation system
-# doxygen (www.doxygen.org) for a project.
-#
-# All text after a hash (#) is considered a comment and will be ignored.
-# The format is:
-# TAG = value [value, ...]
-# For lists items can also be appended using:
-# TAG += value [value, ...]
-# Values that contain spaces should be placed between quotes (" ").
-
-#---------------------------------------------------------------------------
-# Project related configuration options
-#---------------------------------------------------------------------------
-
-# This tag specifies the encoding used for all characters in the config file
-# that follow. The default is UTF-8 which is also the encoding used for all
-# text before the first occurrence of this tag. Doxygen uses libiconv (or the
-# iconv built into libc) for the transcoding. See
-# http://www.gnu.org/software/libiconv for the list of possible encodings.
-
-DOXYFILE_ENCODING = UTF-8
-
-# The PROJECT_NAME tag is a single word (or sequence of words) that should
-# identify the project. Note that if you do not use Doxywizard you need
-# to put quotes around the project name if it contains spaces.
-
-PROJECT_NAME = "LUFA Library"
-
-# The PROJECT_NUMBER tag can be used to enter a project or revision number.
-# This could be handy for archiving the generated documentation or
-# if some version control system is used.
-
-PROJECT_NUMBER = 000000
-
-# Using the PROJECT_BRIEF tag one can provide an optional one line description
-# for a project that appears at the top of each page and should give viewer
-# a quick idea about the purpose of the project. Keep the description short.
-
-PROJECT_BRIEF =
-
-# With the PROJECT_LOGO tag one can specify an logo or icon that is
-# included in the documentation. The maximum height of the logo should not
-# exceed 55 pixels and the maximum width should not exceed 200 pixels.
-# Doxygen will copy the logo to the output directory.
-
-PROJECT_LOGO = ./DoxygenPages/Images/LUFA_thumb.png
-
-# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
-# base path where the generated documentation will be put.
-# If a relative path is entered, it will be relative to the location
-# where doxygen was started. If left blank the current directory will be used.
-
-OUTPUT_DIRECTORY = ./Documentation/
-
-# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create
-# 4096 sub-directories (in 2 levels) under the output directory of each output
-# format and will distribute the generated files over these directories.
-# Enabling this option can be useful when feeding doxygen a huge amount of
-# source files, where putting all generated files in the same directory would
-# otherwise cause performance problems for the file system.
-
-CREATE_SUBDIRS = NO
-
-# The OUTPUT_LANGUAGE tag is used to specify the language in which all
-# documentation generated by doxygen is written. Doxygen will use this
-# information to generate all constant output in the proper language.
-# The default language is English, other supported languages are:
-# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,
-# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,
-# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English
-# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian,
-# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic, Slovak,
-# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.
-
-OUTPUT_LANGUAGE = English
-
-# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will
-# include brief member descriptions after the members that are listed in
-# the file and class documentation (similar to JavaDoc).
-# Set to NO to disable this.
-
-BRIEF_MEMBER_DESC = YES
-
-# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
-# the brief description of a member or function before the detailed description.
-# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
-# brief descriptions will be completely suppressed.
-
-REPEAT_BRIEF = NO
-
-# This tag implements a quasi-intelligent brief description abbreviator
-# that is used to form the text in various listings. Each string
-# in this list, if found as the leading text of the brief description, will be
-# stripped from the text and the result after processing the whole list, is
-# used as the annotated text. Otherwise, the brief description is used as-is.
-# If left blank, the following values are used ("$name" is automatically
-# replaced with the name of the entity): "The $name class" "The $name widget"
-# "The $name file" "is" "provides" "specifies" "contains"
-# "represents" "a" "an" "the"
-
-ABBREVIATE_BRIEF = "The $name class" \
- "The $name widget" \
- "The $name file" \
- is \
- provides \
- specifies \
- contains \
- represents \
- a \
- an \
- the
-
-# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
-# Doxygen will generate a detailed section even if there is only a brief
-# description.
-
-ALWAYS_DETAILED_SEC = NO
-
-# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
-# inherited members of a class in the documentation of that class as if those
-# members were ordinary class members. Constructors, destructors and assignment
-# operators of the base classes will not be shown.
-
-INLINE_INHERITED_MEMB = NO
-
-# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full
-# path before files name in the file list and in the header files. If set
-# to NO the shortest path that makes the file name unique will be used.
-
-FULL_PATH_NAMES = YES
-
-# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag
-# can be used to strip a user-defined part of the path. Stripping is
-# only done if one of the specified strings matches the left-hand part of
-# the path. The tag can be used to show relative paths in the file list.
-# If left blank the directory from which doxygen is run is used as the
-# path to strip.
-
-STRIP_FROM_PATH =
-
-# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of
-# the path mentioned in the documentation of a class, which tells
-# the reader which header file to include in order to use a class.
-# If left blank only the name of the header file containing the class
-# definition is used. Otherwise one should specify the include paths that
-# are normally passed to the compiler using the -I flag.
-
-STRIP_FROM_INC_PATH =
-
-# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter
-# (but less readable) file names. This can be useful if your file system
-# doesn't support long names like on DOS, Mac, or CD-ROM.
-
-SHORT_NAMES = NO
-
-# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen
-# will interpret the first line (until the first dot) of a JavaDoc-style
-# comment as the brief description. If set to NO, the JavaDoc
-# comments will behave just like regular Qt-style comments
-# (thus requiring an explicit @brief command for a brief description.)
-
-JAVADOC_AUTOBRIEF = NO
-
-# If the QT_AUTOBRIEF tag is set to YES then Doxygen will
-# interpret the first line (until the first dot) of a Qt-style
-# comment as the brief description. If set to NO, the comments
-# will behave just like regular Qt-style comments (thus requiring
-# an explicit \brief command for a brief description.)
-
-QT_AUTOBRIEF = NO
-
-# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen
-# treat a multi-line C++ special comment block (i.e. a block of //! or ///
-# comments) as a brief description. This used to be the default behaviour.
-# The new default is to treat a multi-line C++ comment block as a detailed
-# description. Set this tag to YES if you prefer the old behaviour instead.
-
-MULTILINE_CPP_IS_BRIEF = NO
-
-# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented
-# member inherits the documentation from any documented member that it
-# re-implements.
-
-INHERIT_DOCS = YES
-
-# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce
-# a new page for each member. If set to NO, the documentation of a member will
-# be part of the file/class/namespace that contains it.
-
-SEPARATE_MEMBER_PAGES = NO
-
-# The TAB_SIZE tag can be used to set the number of spaces in a tab.
-# Doxygen uses this value to replace tabs by spaces in code fragments.
-
-TAB_SIZE = 4
-
-# This tag can be used to specify a number of aliases that acts
-# as commands in the documentation. An alias has the form "name=value".
-# For example adding "sideeffect=\par Side Effects:\n" will allow you to
-# put the command \sideeffect (or @sideeffect) in the documentation, which
-# will result in a user-defined paragraph with heading "Side Effects:".
-# You can put \n's in the value part of an alias to insert newlines.
-
-ALIASES =
-
-# This tag can be used to specify a number of word-keyword mappings (TCL only).
-# A mapping has the form "name=value". For example adding
-# "class=itcl::class" will allow you to use the command class in the
-# itcl::class meaning.
-
-TCL_SUBST =
-
-# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C
-# sources only. Doxygen will then generate output that is more tailored for C.
-# For instance, some of the names that are used will be different. The list
-# of all members will be omitted, etc.
-
-OPTIMIZE_OUTPUT_FOR_C = YES
-
-# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java
-# sources only. Doxygen will then generate output that is more tailored for
-# Java. For instance, namespaces will be presented as packages, qualified
-# scopes will look different, etc.
-
-OPTIMIZE_OUTPUT_JAVA = NO
-
-# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
-# sources only. Doxygen will then generate output that is more tailored for
-# Fortran.
-
-OPTIMIZE_FOR_FORTRAN = NO
-
-# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
-# sources. Doxygen will then generate output that is tailored for
-# VHDL.
-
-OPTIMIZE_OUTPUT_VHDL = NO
-
-# Doxygen selects the parser to use depending on the extension of the files it
-# parses. With this tag you can assign which parser to use for a given extension.
-# Doxygen has a built-in mapping, but you can override or extend it using this
-# tag. The format is ext=language, where ext is a file extension, and language
-# is one of the parsers supported by doxygen: IDL, Java, Javascript, CSharp, C,
-# C++, D, PHP, Objective-C, Python, Fortran, VHDL, C, C++. For instance to make
-# doxygen treat .inc files as Fortran files (default is PHP), and .f files as C
-# (default is Fortran), use: inc=Fortran f=C. Note that for custom extensions
-# you also need to set FILE_PATTERNS otherwise the files are not read by doxygen.
-
-EXTENSION_MAPPING =
-
-# If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all
-# comments according to the Markdown format, which allows for more readable
-# documentation. See http://daringfireball.net/projects/markdown/ for details.
-# The output of markdown processing is further processed by doxygen, so you
-# can mix doxygen, HTML, and XML commands with Markdown formatting.
-# Disable only in case of backward compatibilities issues.
-
-MARKDOWN_SUPPORT = NO
-
-# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
-# to include (a tag file for) the STL sources as input, then you should
-# set this tag to YES in order to let doxygen match functions declarations and
-# definitions whose arguments contain STL classes (e.g. func(std::string); v.s.
-# func(std::string) {}). This also makes the inheritance and collaboration
-# diagrams that involve STL classes more complete and accurate.
-
-BUILTIN_STL_SUPPORT = NO
-
-# If you use Microsoft's C++/CLI language, you should set this option to YES to
-# enable parsing support.
-
-CPP_CLI_SUPPORT = NO
-
-# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.
-# Doxygen will parse them like normal C++ but will assume all classes use public
-# instead of private inheritance when no explicit protection keyword is present.
-
-SIP_SUPPORT = NO
-
-# For Microsoft's IDL there are propget and propput attributes to indicate getter
-# and setter methods for a property. Setting this option to YES (the default)
-# will make doxygen replace the get and set methods by a property in the
-# documentation. This will only work if the methods are indeed getting or
-# setting a simple type. If this is not the case, or you want to show the
-# methods anyway, you should set this option to NO.
-
-IDL_PROPERTY_SUPPORT = YES
-
-# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
-# tag is set to YES, then doxygen will reuse the documentation of the first
-# member in the group (if any) for the other members of the group. By default
-# all members of a group must be documented explicitly.
-
-DISTRIBUTE_GROUP_DOC = NO
-
-# Set the SUBGROUPING tag to YES (the default) to allow class member groups of
-# the same type (for instance a group of public functions) to be put as a
-# subgroup of that type (e.g. under the Public Functions section). Set it to
-# NO to prevent subgrouping. Alternatively, this can be done per class using
-# the \nosubgrouping command.
-
-SUBGROUPING = YES
-
-# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and
-# unions are shown inside the group in which they are included (e.g. using
-# @ingroup) instead of on a separate page (for HTML and Man pages) or
-# section (for LaTeX and RTF).
-
-INLINE_GROUPED_CLASSES = NO
-
-# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and
-# unions with only public data fields will be shown inline in the documentation
-# of the scope in which they are defined (i.e. file, namespace, or group
-# documentation), provided this scope is documented. If set to NO (the default),
-# structs, classes, and unions are shown on a separate page (for HTML and Man
-# pages) or section (for LaTeX and RTF).
-
-INLINE_SIMPLE_STRUCTS = NO
-
-# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum
-# is documented as struct, union, or enum with the name of the typedef. So
-# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
-# with name TypeT. When disabled the typedef will appear as a member of a file,
-# namespace, or class. And the struct will be named TypeS. This can typically
-# be useful for C code in case the coding convention dictates that all compound
-# types are typedef'ed and only the typedef is referenced, never the tag name.
-
-TYPEDEF_HIDES_STRUCT = YES
-
-# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to
-# determine which symbols to keep in memory and which to flush to disk.
-# When the cache is full, less often used symbols will be written to disk.
-# For small to medium size projects (<1000 input files) the default value is
-# probably good enough. For larger projects a too small cache size can cause
-# doxygen to be busy swapping symbols to and from disk most of the time
-# causing a significant performance penalty.
-# If the system has enough physical memory increasing the cache will improve the
-# performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will roughly double the
-# memory usage. The cache size is given by this formula:
-# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
-
-SYMBOL_CACHE_SIZE = 0
-
-# Similar to the SYMBOL_CACHE_SIZE the size of the symbol lookup cache can be
-# set using LOOKUP_CACHE_SIZE. This cache is used to resolve symbols given
-# their name and scope. Since this can be an expensive process and often the
-# same symbol appear multiple times in the code, doxygen keeps a cache of
-# pre-resolved symbols. If the cache is too small doxygen will become slower.
-# If the cache is too large, memory is wasted. The cache size is given by this
-# formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range is 0..9, the default is 0,
-# corresponding to a cache size of 2^16 = 65536 symbols.
-
-LOOKUP_CACHE_SIZE = 0
-
-#---------------------------------------------------------------------------
-# Build related configuration options
-#---------------------------------------------------------------------------
-
-# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
-# documentation are documented, even if no documentation was available.
-# Private class members and static file members will be hidden unless
-# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES
-
-EXTRACT_ALL = YES
-
-# If the EXTRACT_PRIVATE tag is set to YES all private members of a class
-# will be included in the documentation.
-
-EXTRACT_PRIVATE = YES
-
-# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal scope will be included in the documentation.
-
-EXTRACT_PACKAGE = NO
-
-# If the EXTRACT_STATIC tag is set to YES all static members of a file
-# will be included in the documentation.
-
-EXTRACT_STATIC = YES
-
-# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)
-# defined locally in source files will be included in the documentation.
-# If set to NO only classes defined in header files are included.
-
-EXTRACT_LOCAL_CLASSES = YES
-
-# This flag is only useful for Objective-C code. When set to YES local
-# methods, which are defined in the implementation section but not in
-# the interface are included in the documentation.
-# If set to NO (the default) only methods in the interface are included.
-
-EXTRACT_LOCAL_METHODS = NO
-
-# If this flag is set to YES, the members of anonymous namespaces will be
-# extracted and appear in the documentation as a namespace called
-# 'anonymous_namespace{file}', where file will be replaced with the base
-# name of the file that contains the anonymous namespace. By default
-# anonymous namespaces are hidden.
-
-EXTRACT_ANON_NSPACES = NO
-
-# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all
-# undocumented members of documented classes, files or namespaces.
-# If set to NO (the default) these members will be included in the
-# various overviews, but no documentation section is generated.
-# This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_MEMBERS = NO
-
-# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all
-# undocumented classes that are normally visible in the class hierarchy.
-# If set to NO (the default) these classes will be included in the various
-# overviews. This option has no effect if EXTRACT_ALL is enabled.
-
-HIDE_UNDOC_CLASSES = NO
-
-# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all
-# friend (class|struct|union) declarations.
-# If set to NO (the default) these declarations will be included in the
-# documentation.
-
-HIDE_FRIEND_COMPOUNDS = NO
-
-# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any
-# documentation blocks found inside the body of a function.
-# If set to NO (the default) these blocks will be appended to the
-# function's detailed documentation block.
-
-HIDE_IN_BODY_DOCS = NO
-
-# The INTERNAL_DOCS tag determines if documentation
-# that is typed after a \internal command is included. If the tag is set
-# to NO (the default) then the documentation will be excluded.
-# Set it to YES to include the internal documentation.
-
-INTERNAL_DOCS = NO
-
-# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate
-# file names in lower-case letters. If set to YES upper-case letters are also
-# allowed. This is useful if you have classes or files whose names only differ
-# in case and if your file system supports case sensitive file names. Windows
-# and Mac users are advised to set this option to NO.
-
-CASE_SENSE_NAMES = NO
-
-# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen
-# will show members with their full class and namespace scopes in the
-# documentation. If set to YES the scope will be hidden.
-
-HIDE_SCOPE_NAMES = NO
-
-# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen
-# will put a list of the files that are included by a file in the documentation
-# of that file.
-
-SHOW_INCLUDE_FILES = YES
-
-# If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen
-# will list include files with double quotes in the documentation
-# rather than with sharp brackets.
-
-FORCE_LOCAL_INCLUDES = NO
-
-# If the INLINE_INFO tag is set to YES (the default) then a tag [inline]
-# is inserted in the documentation for inline members.
-
-INLINE_INFO = YES
-
-# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen
-# will sort the (detailed) documentation of file and class members
-# alphabetically by member name. If set to NO the members will appear in
-# declaration order.
-
-SORT_MEMBER_DOCS = YES
-
-# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the
-# brief documentation of file, namespace and class members alphabetically
-# by member name. If set to NO (the default) the members will appear in
-# declaration order.
-
-SORT_BRIEF_DOCS = NO
-
-# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen
-# will sort the (brief and detailed) documentation of class members so that
-# constructors and destructors are listed first. If set to NO (the default)
-# the constructors will appear in the respective orders defined by
-# SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.
-# This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO
-# and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.
-
-SORT_MEMBERS_CTORS_1ST = NO
-
-# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the
-# hierarchy of group names into alphabetical order. If set to NO (the default)
-# the group names will appear in their defined order.
-
-SORT_GROUP_NAMES = YES
-
-# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be
-# sorted by fully-qualified names, including namespaces. If set to
-# NO (the default), the class list will be sorted only by class name,
-# not including the namespace part.
-# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
-# Note: This option applies only to the class list, not to the
-# alphabetical list.
-
-SORT_BY_SCOPE_NAME = NO
-
-# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to
-# do proper type resolution of all parameters of a function it will reject a
-# match between the prototype and the implementation of a member function even
-# if there is only one candidate or it is obvious which candidate to choose
-# by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen
-# will still accept a match between prototype and implementation in such cases.
-
-STRICT_PROTO_MATCHING = NO
-
-# The GENERATE_TODOLIST tag can be used to enable (YES) or
-# disable (NO) the todo list. This list is created by putting \todo
-# commands in the documentation.
-
-GENERATE_TODOLIST = NO
-
-# The GENERATE_TESTLIST tag can be used to enable (YES) or
-# disable (NO) the test list. This list is created by putting \test
-# commands in the documentation.
-
-GENERATE_TESTLIST = NO
-
-# The GENERATE_BUGLIST tag can be used to enable (YES) or
-# disable (NO) the bug list. This list is created by putting \bug
-# commands in the documentation.
-
-GENERATE_BUGLIST = NO
-
-# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or
-# disable (NO) the deprecated list. This list is created by putting
-# \deprecated commands in the documentation.
-
-GENERATE_DEPRECATEDLIST= YES
-
-# The ENABLED_SECTIONS tag can be used to enable conditional
-# documentation sections, marked by \if sectionname ... \endif.
-
-ENABLED_SECTIONS =
-
-# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
-# the initial value of a variable or macro consists of for it to appear in
-# the documentation. If the initializer consists of more lines than specified
-# here it will be hidden. Use a value of 0 to hide initializers completely.
-# The appearance of the initializer of individual variables and macros in the
-# documentation can be controlled using \showinitializer or \hideinitializer
-# command in the documentation regardless of this setting.
-
-MAX_INITIALIZER_LINES = 15
-
-# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
-# at the bottom of the documentation of classes and structs. If set to YES the
-# list will mention the files that were used to generate the documentation.
-
-SHOW_USED_FILES = YES
-
-# Set the SHOW_FILES tag to NO to disable the generation of the Files page.
-# This will remove the Files entry from the Quick Index and from the
-# Folder Tree View (if specified). The default is YES.
-
-SHOW_FILES = YES
-
-# Set the SHOW_NAMESPACES tag to NO to disable the generation of the
-# Namespaces page.
-# This will remove the Namespaces entry from the Quick Index
-# and from the Folder Tree View (if specified). The default is YES.
-
-SHOW_NAMESPACES = YES
-
-# The FILE_VERSION_FILTER tag can be used to specify a program or script that
-# doxygen should invoke to get the current version for each file (typically from
-# the version control system). Doxygen will invoke the program by executing (via
-# popen()) the command <command> <input-file>, where <command> is the value of
-# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file
-# provided by doxygen. Whatever the program writes to standard output
-# is used as the file version. See the manual for examples.
-
-FILE_VERSION_FILTER =
-
-# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
-# by doxygen. The layout file controls the global structure of the generated
-# output files in an output format independent way. To create the layout file
-# that represents doxygen's defaults, run doxygen with the -l option.
-# You can optionally specify a file name after the option, if omitted
-# DoxygenLayout.xml will be used as the name of the layout file.
-
-LAYOUT_FILE =
-
-# The CITE_BIB_FILES tag can be used to specify one or more bib files
-# containing the references data. This must be a list of .bib files. The
-# .bib extension is automatically appended if omitted. Using this command
-# requires the bibtex tool to be installed. See also
-# http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style
-# of the bibliography can be controlled using LATEX_BIB_STYLE. To use this
-# feature you need bibtex and perl available in the search path.
-
-CITE_BIB_FILES =
-
-#---------------------------------------------------------------------------
-# configuration options related to warning and progress messages
-#---------------------------------------------------------------------------
-
-# The QUIET tag can be used to turn on/off the messages that are generated
-# by doxygen. Possible values are YES and NO. If left blank NO is used.
-
-QUIET = YES
-
-# The WARNINGS tag can be used to turn on/off the warning messages that are
-# generated by doxygen. Possible values are YES and NO. If left blank
-# NO is used.
-
-WARNINGS = YES
-
-# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
-# for undocumented members. If EXTRACT_ALL is set to YES then this flag will
-# automatically be disabled.
-
-WARN_IF_UNDOCUMENTED = YES
-
-# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for
-# potential errors in the documentation, such as not documenting some
-# parameters in a documented function, or documenting parameters that
-# don't exist or using markup commands wrongly.
-
-WARN_IF_DOC_ERROR = YES
-
-# The WARN_NO_PARAMDOC option can be enabled to get warnings for
-# functions that are documented, but have no documentation for their parameters
-# or return value. If set to NO (the default) doxygen will only warn about
-# wrong or incomplete parameter documentation, but not about the absence of
-# documentation.
-
-WARN_NO_PARAMDOC = YES
-
-# The WARN_FORMAT tag determines the format of the warning messages that
-# doxygen can produce. The string should contain the $file, $line, and $text
-# tags, which will be replaced by the file and line number from which the
-# warning originated and the warning text. Optionally the format may contain
-# $version, which will be replaced by the version of the file (if it could
-# be obtained via FILE_VERSION_FILTER)
-
-WARN_FORMAT = "$file:$line: $text"
-
-# The WARN_LOGFILE tag can be used to specify a file to which warning
-# and error messages should be written. If left blank the output is written
-# to stderr.
-
-WARN_LOGFILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the input files
-#---------------------------------------------------------------------------
-
-# The INPUT tag can be used to specify the files and/or directories that contain
-# documented source files. You may enter file names like "myfile.cpp" or
-# directories like "/usr/src/myproject". Separate the files or directories
-# with spaces.
-
-INPUT = ./
-
-# This tag can be used to specify the character encoding of the source files
-# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is
-# also the default input encoding. Doxygen uses libiconv (or the iconv built
-# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for
-# the list of possible encodings.
-
-INPUT_ENCODING = UTF-8
-
-# If the value of the INPUT tag contains directories, you can use the
-# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank the following patterns are tested:
-# *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh
-# *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py
-# *.f90 *.f *.for *.vhd *.vhdl
-
-FILE_PATTERNS = *.h \
- *.txt
-
-# The RECURSIVE tag can be used to turn specify whether or not subdirectories
-# should be searched for input files as well. Possible values are YES and NO.
-# If left blank NO is used.
-
-RECURSIVE = YES
-
-# The EXCLUDE tag can be used to specify files and/or directories that should be
-# excluded from the INPUT source files. This way you can easily exclude a
-# subdirectory from a directory tree whose root is specified with the INPUT tag.
-# Note that relative paths are relative to the directory from which doxygen is
-# run.
-
-EXCLUDE = Documentation/ \
- License.txt
-
-# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
-# directories that are symbolic links (a Unix file system feature) are excluded
-# from the input.
-
-EXCLUDE_SYMLINKS = NO
-
-# If the value of the INPUT tag contains directories, you can use the
-# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
-# certain files from those directories. Note that the wildcards are matched
-# against the file with absolute path, so to exclude all test directories
-# for example use the pattern */test/*
-
-EXCLUDE_PATTERNS =
-
-# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
-# (namespaces, classes, functions, etc.) that should be excluded from the
-# output. The symbol name can be a fully qualified name, a word, or if the
-# wildcard * is used, a substring. Examples: ANamespace, AClass,
-# AClass::ANamespace, ANamespace::*Test
-
-EXCLUDE_SYMBOLS = _* \
- __*
-
-# The EXAMPLE_PATH tag can be used to specify one or more files or
-# directories that contain example code fragments that are included (see
-# the \include command).
-
-EXAMPLE_PATH = ./ \
- CodeTemplates/
-
-# If the value of the EXAMPLE_PATH tag contains directories, you can use the
-# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
-# and *.h) to filter out the source-files in the directories. If left
-# blank all files are included.
-
-EXAMPLE_PATTERNS = *
-
-# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
-# searched for input files to be used with the \include or \dontinclude
-# commands irrespective of the value of the RECURSIVE tag.
-# Possible values are YES and NO. If left blank NO is used.
-
-EXAMPLE_RECURSIVE = NO
-
-# The IMAGE_PATH tag can be used to specify one or more files or
-# directories that contain image that are included in the documentation (see
-# the \image command).
-
-IMAGE_PATH = ./
-
-# The INPUT_FILTER tag can be used to specify a program that doxygen should
-# invoke to filter for each input file. Doxygen will invoke the filter program
-# by executing (via popen()) the command <filter> <input-file>, where <filter>
-# is the value of the INPUT_FILTER tag, and <input-file> is the name of an
-# input file. Doxygen will then use the output that the filter program writes
-# to standard output.
-# If FILTER_PATTERNS is specified, this tag will be
-# ignored.
-
-INPUT_FILTER =
-
-# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
-# basis.
-# Doxygen will compare the file name with each pattern and apply the
-# filter if there is a match.
-# The filters are a list of the form:
-# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further
-# info on how filters are used. If FILTER_PATTERNS is empty or if
-# non of the patterns match the file name, INPUT_FILTER is applied.
-
-FILTER_PATTERNS =
-
-# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
-# INPUT_FILTER) will be used to filter the input files when producing source
-# files to browse (i.e. when SOURCE_BROWSER is set to YES).
-
-FILTER_SOURCE_FILES = NO
-
-# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
-# pattern. A pattern will override the setting for FILTER_PATTERN (if any)
-# and it is also possible to disable source filtering for a specific pattern
-# using *.ext= (so without naming a filter). This option only has effect when
-# FILTER_SOURCE_FILES is enabled.
-
-FILTER_SOURCE_PATTERNS =
-
-#---------------------------------------------------------------------------
-# configuration options related to source browsing
-#---------------------------------------------------------------------------
-
-# If the SOURCE_BROWSER tag is set to YES then a list of source files will
-# be generated. Documented entities will be cross-referenced with these sources.
-# Note: To get rid of all source code in the generated output, make sure also
-# VERBATIM_HEADERS is set to NO.
-
-SOURCE_BROWSER = NO
-
-# Setting the INLINE_SOURCES tag to YES will include the body
-# of functions and classes directly in the documentation.
-
-INLINE_SOURCES = NO
-
-# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct
-# doxygen to hide any special comment blocks from generated source code
-# fragments. Normal C, C++ and Fortran comments will always remain visible.
-
-STRIP_CODE_COMMENTS = YES
-
-# If the REFERENCED_BY_RELATION tag is set to YES
-# then for each documented function all documented
-# functions referencing it will be listed.
-
-REFERENCED_BY_RELATION = NO
-
-# If the REFERENCES_RELATION tag is set to YES
-# then for each documented function all documented entities
-# called/used by that function will be listed.
-
-REFERENCES_RELATION = NO
-
-# If the REFERENCES_LINK_SOURCE tag is set to YES (the default)
-# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from
-# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will
-# link to the source code.
-# Otherwise they will link to the documentation.
-
-REFERENCES_LINK_SOURCE = NO
-
-# If the USE_HTAGS tag is set to YES then the references to source code
-# will point to the HTML generated by the htags(1) tool instead of doxygen
-# built-in source browser. The htags tool is part of GNU's global source
-# tagging system (see http://www.gnu.org/software/global/global.html). You
-# will need version 4.8.6 or higher.
-
-USE_HTAGS = NO
-
-# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen
-# will generate a verbatim copy of the header file for each class for
-# which an include is specified. Set to NO to disable this.
-
-VERBATIM_HEADERS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the alphabetical class index
-#---------------------------------------------------------------------------
-
-# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index
-# of all compounds will be generated. Enable this if the project
-# contains a lot of classes, structs, unions or interfaces.
-
-ALPHABETICAL_INDEX = YES
-
-# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then
-# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns
-# in which this list will be split (can be a number in the range [1..20])
-
-COLS_IN_ALPHA_INDEX = 5
-
-# In case all classes in a project start with a common prefix, all
-# classes will be put under the same header in the alphabetical index.
-# The IGNORE_PREFIX tag can be used to specify one or more prefixes that
-# should be ignored while generating the index headers.
-
-IGNORE_PREFIX =
-
-#---------------------------------------------------------------------------
-# configuration options related to the HTML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_HTML tag is set to YES (the default) Doxygen will
-# generate HTML output.
-
-GENERATE_HTML = YES
-
-# The HTML_OUTPUT tag is used to specify where the HTML docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `html' will be used as the default path.
-
-HTML_OUTPUT = html
-
-# The HTML_FILE_EXTENSION tag can be used to specify the file extension for
-# each generated HTML page (for example: .htm,.php,.asp). If it is left blank
-# doxygen will generate files with .html extension.
-
-HTML_FILE_EXTENSION = .html
-
-# The HTML_HEADER tag can be used to specify a personal HTML header for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard header. Note that when using a custom header you are responsible
-# for the proper inclusion of any scripts and style sheets that doxygen
-# needs, which is dependent on the configuration options used.
-# It is advised to generate a default header using "doxygen -w html
-# header.html footer.html stylesheet.css YourConfigFile" and then modify
-# that header. Note that the header is subject to change so you typically
-# have to redo this when upgrading to a newer version of doxygen or when
-# changing the value of configuration settings such as GENERATE_TREEVIEW!
-
-HTML_HEADER =
-
-# The HTML_FOOTER tag can be used to specify a personal HTML footer for
-# each generated HTML page. If it is left blank doxygen will generate a
-# standard footer.
-
-HTML_FOOTER = ./DoxygenPages/Style/Footer.htm
-
-# The HTML_STYLESHEET tag can be used to specify a user-defined cascading
-# style sheet that is used by each HTML page. It can be used to
-# fine-tune the look of the HTML output. If the tag is left blank doxygen
-# will generate a default style sheet. Note that doxygen will try to copy
-# the style sheet file to the HTML output directory, so don't put your own
-# style sheet in the HTML output directory as well, or it will be erased!
-
-HTML_STYLESHEET = ./DoxygenPages/Style/Style.css
-
-# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
-# other source files which should be copied to the HTML output directory. Note
-# that these files will be copied to the base HTML output directory. Use the
-# $relpath$ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
-# files. In the HTML_STYLESHEET file, use the file name only. Also note that
-# the files will be copied as-is; there are no commands or markers available.
-
-HTML_EXTRA_FILES =
-
-# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.
-# Doxygen will adjust the colors in the style sheet and background images
-# according to this color. Hue is specified as an angle on a colorwheel,
-# see http://en.wikipedia.org/wiki/Hue for more information.
-# For instance the value 0 represents red, 60 is yellow, 120 is green,
-# 180 is cyan, 240 is blue, 300 purple, and 360 is red again.
-# The allowed range is 0 to 359.
-
-HTML_COLORSTYLE_HUE = 220
-
-# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of
-# the colors in the HTML output. For a value of 0 the output will use
-# grayscales only. A value of 255 will produce the most vivid colors.
-
-HTML_COLORSTYLE_SAT = 120
-
-# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to
-# the luminance component of the colors in the HTML output. Values below
-# 100 gradually make the output lighter, whereas values above 100 make
-# the output darker. The value divided by 100 is the actual gamma applied,
-# so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,
-# and 100 does not change the gamma.
-
-HTML_COLORSTYLE_GAMMA = 80
-
-# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
-# page will contain the date and time when the page was generated. Setting
-# this to NO can help when comparing the output of multiple runs.
-
-HTML_TIMESTAMP = NO
-
-# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
-# documentation will contain sections that can be hidden and shown after the
-# page has loaded.
-
-HTML_DYNAMIC_SECTIONS = YES
-
-# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
-# entries shown in the various tree structured indices initially; the user
-# can expand and collapse entries dynamically later on. Doxygen will expand
-# the tree to such a level that at most the specified number of entries are
-# visible (unless a fully collapsed tree already exceeds this amount).
-# So setting the number of entries 1 will produce a full collapsed tree by
-# default. 0 is a special value representing an infinite number of entries
-# and will result in a full expanded tree by default.
-
-HTML_INDEX_NUM_ENTRIES = 100
-
-# If the GENERATE_DOCSET tag is set to YES, additional index files
-# will be generated that can be used as input for Apple's Xcode 3
-# integrated development environment, introduced with OSX 10.5 (Leopard).
-# To create a documentation set, doxygen will generate a Makefile in the
-# HTML output directory. Running make will produce the docset in that
-# directory and running "make install" will install the docset in
-# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find
-# it at startup.
-# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
-# for more information.
-
-GENERATE_DOCSET = NO
-
-# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the
-# feed. A documentation feed provides an umbrella under which multiple
-# documentation sets from a single provider (such as a company or product suite)
-# can be grouped.
-
-DOCSET_FEEDNAME = "Doxygen generated docs"
-
-# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that
-# should uniquely identify the documentation set bundle. This should be a
-# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen
-# will append .docset to the name.
-
-DOCSET_BUNDLE_ID = org.doxygen.Project
-
-# When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely identify
-# the documentation publisher. This should be a reverse domain-name style
-# string, e.g. com.mycompany.MyDocSet.documentation.
-
-DOCSET_PUBLISHER_ID = com.lufa-lib.library.documentation
-
-# The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher.
-
-DOCSET_PUBLISHER_NAME = DeanCamera
-
-# If the GENERATE_HTMLHELP tag is set to YES, additional index files
-# will be generated that can be used as input for tools like the
-# Microsoft HTML help workshop to generate a compiled HTML help file (.chm)
-# of the generated HTML documentation.
-
-GENERATE_HTMLHELP = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can
-# be used to specify the file name of the resulting .chm file. You
-# can add a path in front of the file if the result should not be
-# written to the html output directory.
-
-CHM_FILE = ../LUFA.chm
-
-# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can
-# be used to specify the location (absolute path including file name) of
-# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run
-# the HTML help compiler on the generated index.hhp.
-
-HHC_LOCATION =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
-# controls if a separate .chi index file is generated (YES) or that
-# it should be included in the master .chm file (NO).
-
-GENERATE_CHI = NO
-
-# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING
-# is used to encode HtmlHelp index (hhk), content (hhc) and project file
-# content.
-
-CHM_INDEX_ENCODING =
-
-# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
-# controls whether a binary table of contents is generated (YES) or a
-# normal table of contents (NO) in the .chm file.
-
-BINARY_TOC = NO
-
-# The TOC_EXPAND flag can be set to YES to add extra items for group members
-# to the contents of the HTML help documentation and to the tree view.
-
-TOC_EXPAND = YES
-
-# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
-# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated
-# that can be used as input for Qt's qhelpgenerator to generate a
-# Qt Compressed Help (.qch) of the generated HTML documentation.
-
-GENERATE_QHP = NO
-
-# If the QHG_LOCATION tag is specified, the QCH_FILE tag can
-# be used to specify the file name of the resulting .qch file.
-# The path specified is relative to the HTML output folder.
-
-QCH_FILE =
-
-# The QHP_NAMESPACE tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#namespace
-
-QHP_NAMESPACE = org.doxygen.Project
-
-# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating
-# Qt Help Project output. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#virtual-folders
-
-QHP_VIRTUAL_FOLDER = doc
-
-# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to
-# add. For more information please see
-# http://doc.trolltech.com/qthelpproject.html#custom-filters
-
-QHP_CUST_FILTER_NAME =
-
-# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the
-# custom filter to add. For more information please see
-# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">
-# Qt Help Project / Custom Filters</a>.
-
-QHP_CUST_FILTER_ATTRS =
-
-# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
-# project's
-# filter section matches.
-# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">
-# Qt Help Project / Filter Attributes</a>.
-
-QHP_SECT_FILTER_ATTRS =
-
-# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can
-# be used to specify the location of Qt's qhelpgenerator.
-# If non-empty doxygen will try to run qhelpgenerator on the generated
-# .qhp file.
-
-QHG_LOCATION =
-
-# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files
-# will be generated, which together with the HTML files, form an Eclipse help
-# plugin. To install this plugin and make it available under the help contents
-# menu in Eclipse, the contents of the directory containing the HTML and XML
-# files needs to be copied into the plugins directory of eclipse. The name of
-# the directory within the plugins directory should be the same as
-# the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before
-# the help appears.
-
-GENERATE_ECLIPSEHELP = NO
-
-# A unique identifier for the eclipse help plugin. When installing the plugin
-# the directory name containing the HTML and XML files should also have
-# this name.
-
-ECLIPSE_DOC_ID = org.doxygen.Project
-
-# The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)
-# at top of each HTML page. The value NO (the default) enables the index and
-# the value YES disables it. Since the tabs have the same information as the
-# navigation tree you can set this option to NO if you already set
-# GENERATE_TREEVIEW to YES.
-
-DISABLE_INDEX = YES
-
-# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
-# structure should be generated to display hierarchical information.
-# If the tag value is set to YES, a side panel will be generated
-# containing a tree-like index structure (just like the one that
-# is generated for HTML Help). For this to work a browser that supports
-# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).
-# Windows users are probably better off using the HTML help feature.
-# Since the tree basically has the same information as the tab index you
-# could consider to set DISABLE_INDEX to NO when enabling this option.
-
-GENERATE_TREEVIEW = YES
-
-# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values
-# (range [0,1..20]) that doxygen will group on one line in the generated HTML
-# documentation. Note that a value of 0 will completely suppress the enum
-# values from appearing in the overview section.
-
-ENUM_VALUES_PER_LINE = 1
-
-# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
-# used to set the initial width (in pixels) of the frame in which the tree
-# is shown.
-
-TREEVIEW_WIDTH = 300
-
-# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open
-# links to external symbols imported via tag files in a separate window.
-
-EXT_LINKS_IN_WINDOW = NO
-
-# Use this tag to change the font size of Latex formulas included
-# as images in the HTML documentation. The default is 10. Note that
-# when you change the font size after a successful doxygen run you need
-# to manually remove any form_*.png images from the HTML output directory
-# to force them to be regenerated.
-
-FORMULA_FONTSIZE = 10
-
-# Use the FORMULA_TRANPARENT tag to determine whether or not the images
-# generated for formulas are transparent PNGs. Transparent PNGs are
-# not supported properly for IE 6.0, but are supported on all modern browsers.
-# Note that when changing this option you need to delete any form_*.png files
-# in the HTML output before the changes have effect.
-
-FORMULA_TRANSPARENT = YES
-
-# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax
-# (see http://www.mathjax.org) which uses client side Javascript for the
-# rendering instead of using prerendered bitmaps. Use this if you do not
-# have LaTeX installed or if you want to formulas look prettier in the HTML
-# output. When enabled you may also need to install MathJax separately and
-# configure the path to it using the MATHJAX_RELPATH option.
-
-USE_MATHJAX = NO
-
-# When MathJax is enabled you need to specify the location relative to the
-# HTML output directory using the MATHJAX_RELPATH option. The destination
-# directory should contain the MathJax.js script. For instance, if the mathjax
-# directory is located at the same level as the HTML output directory, then
-# MATHJAX_RELPATH should be ../mathjax. The default value points to
-# the MathJax Content Delivery Network so you can quickly see the result without
-# installing MathJax.
-# However, it is strongly recommended to install a local
-# copy of MathJax from http://www.mathjax.org before deployment.
-
-MATHJAX_RELPATH = http://www.mathjax.org/mathjax
-
-# The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension
-# names that should be enabled during MathJax rendering.
-
-MATHJAX_EXTENSIONS =
-
-# When the SEARCHENGINE tag is enabled doxygen will generate a search box
-# for the HTML output. The underlying search engine uses javascript
-# and DHTML and should work on any modern browser. Note that when using
-# HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets
-# (GENERATE_DOCSET) there is already a search function so this one should
-# typically be disabled. For large projects the javascript based search engine
-# can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.
-
-SEARCHENGINE = YES
-
-# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
-# implemented using a PHP enabled web server instead of at the web client
-# using Javascript. Doxygen will generate the search PHP script and index
-# file to put on the web server. The advantage of the server
-# based approach is that it scales better to large projects and allows
-# full text search. The disadvantages are that it is more difficult to setup
-# and does not have live searching capabilities.
-
-SERVER_BASED_SEARCH = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the LaTeX output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will
-# generate Latex output.
-
-GENERATE_LATEX = NO
-
-# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `latex' will be used as the default path.
-
-LATEX_OUTPUT = latex
-
-# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
-# invoked. If left blank `latex' will be used as the default command name.
-# Note that when enabling USE_PDFLATEX this option is only used for
-# generating bitmaps for formulas in the HTML output, but not in the
-# Makefile that is written to the output directory.
-
-LATEX_CMD_NAME = latex
-
-# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to
-# generate index for LaTeX. If left blank `makeindex' will be used as the
-# default command name.
-
-MAKEINDEX_CMD_NAME = makeindex
-
-# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact
-# LaTeX documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_LATEX = NO
-
-# The PAPER_TYPE tag can be used to set the paper type that is used
-# by the printer. Possible values are: a4, letter, legal and
-# executive. If left blank a4wide will be used.
-
-PAPER_TYPE = a4wide
-
-# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX
-# packages that should be included in the LaTeX output.
-
-EXTRA_PACKAGES =
-
-# The LATEX_HEADER tag can be used to specify a personal LaTeX header for
-# the generated latex document. The header should contain everything until
-# the first chapter. If it is left blank doxygen will generate a
-# standard header. Notice: only use this tag if you know what you are doing!
-
-LATEX_HEADER =
-
-# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for
-# the generated latex document. The footer should contain everything after
-# the last chapter. If it is left blank doxygen will generate a
-# standard footer. Notice: only use this tag if you know what you are doing!
-
-LATEX_FOOTER =
-
-# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated
-# is prepared for conversion to pdf (using ps2pdf). The pdf file will
-# contain links (just like the HTML output) instead of page references
-# This makes the output suitable for online browsing using a pdf viewer.
-
-PDF_HYPERLINKS = YES
-
-# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of
-# plain latex in the generated Makefile. Set this option to YES to get a
-# higher quality PDF documentation.
-
-USE_PDFLATEX = YES
-
-# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode.
-# command to the generated LaTeX files. This will instruct LaTeX to keep
-# running if errors occur, instead of asking the user for help.
-# This option is also used when generating formulas in HTML.
-
-LATEX_BATCHMODE = NO
-
-# If LATEX_HIDE_INDICES is set to YES then doxygen will not
-# include the index chapters (such as File Index, Compound Index, etc.)
-# in the output.
-
-LATEX_HIDE_INDICES = NO
-
-# If LATEX_SOURCE_CODE is set to YES then doxygen will include
-# source code with syntax highlighting in the LaTeX output.
-# Note that which sources are shown also depends on other settings
-# such as SOURCE_BROWSER.
-
-LATEX_SOURCE_CODE = NO
-
-# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
-# bibliography, e.g. plainnat, or ieeetr. The default style is "plain". See
-# http://en.wikipedia.org/wiki/BibTeX for more info.
-
-LATEX_BIB_STYLE = plain
-
-#---------------------------------------------------------------------------
-# configuration options related to the RTF output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output
-# The RTF output is optimized for Word 97 and may not look very pretty with
-# other RTF readers or editors.
-
-GENERATE_RTF = NO
-
-# The RTF_OUTPUT tag is used to specify where the RTF docs will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `rtf' will be used as the default path.
-
-RTF_OUTPUT = rtf
-
-# If the COMPACT_RTF tag is set to YES Doxygen generates more compact
-# RTF documents. This may be useful for small projects and may help to
-# save some trees in general.
-
-COMPACT_RTF = NO
-
-# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated
-# will contain hyperlink fields. The RTF file will
-# contain links (just like the HTML output) instead of page references.
-# This makes the output suitable for online browsing using WORD or other
-# programs which support those fields.
-# Note: wordpad (write) and others do not support links.
-
-RTF_HYPERLINKS = NO
-
-# Load style sheet definitions from file. Syntax is similar to doxygen's
-# config file, i.e. a series of assignments. You only have to provide
-# replacements, missing definitions are set to their default value.
-
-RTF_STYLESHEET_FILE =
-
-# Set optional variables used in the generation of an rtf document.
-# Syntax is similar to doxygen's config file.
-
-RTF_EXTENSIONS_FILE =
-
-#---------------------------------------------------------------------------
-# configuration options related to the man page output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_MAN tag is set to YES (the default) Doxygen will
-# generate man pages
-
-GENERATE_MAN = NO
-
-# The MAN_OUTPUT tag is used to specify where the man pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `man' will be used as the default path.
-
-MAN_OUTPUT = man
-
-# The MAN_EXTENSION tag determines the extension that is added to
-# the generated man pages (default is the subroutine's section .3)
-
-MAN_EXTENSION = .3
-
-# If the MAN_LINKS tag is set to YES and Doxygen generates man output,
-# then it will generate one additional man file for each entity
-# documented in the real man page(s). These additional files
-# only source the real man page, but without them the man command
-# would be unable to find the correct page. The default is NO.
-
-MAN_LINKS = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the XML output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_XML tag is set to YES Doxygen will
-# generate an XML file that captures the structure of
-# the code including all documentation.
-
-GENERATE_XML = NO
-
-# The XML_OUTPUT tag is used to specify where the XML pages will be put.
-# If a relative path is entered the value of OUTPUT_DIRECTORY will be
-# put in front of it. If left blank `xml' will be used as the default path.
-
-XML_OUTPUT = xml
-
-# The XML_SCHEMA tag can be used to specify an XML schema,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_SCHEMA =
-
-# The XML_DTD tag can be used to specify an XML DTD,
-# which can be used by a validating XML parser to check the
-# syntax of the XML files.
-
-XML_DTD =
-
-# If the XML_PROGRAMLISTING tag is set to YES Doxygen will
-# dump the program listings (including syntax highlighting
-# and cross-referencing information) to the XML output. Note that
-# enabling this will significantly increase the size of the XML output.
-
-XML_PROGRAMLISTING = YES
-
-#---------------------------------------------------------------------------
-# configuration options for the AutoGen Definitions output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will
-# generate an AutoGen Definitions (see autogen.sf.net) file
-# that captures the structure of the code including all
-# documentation. Note that this feature is still experimental
-# and incomplete at the moment.
-
-GENERATE_AUTOGEN_DEF = NO
-
-#---------------------------------------------------------------------------
-# configuration options related to the Perl module output
-#---------------------------------------------------------------------------
-
-# If the GENERATE_PERLMOD tag is set to YES Doxygen will
-# generate a Perl module file that captures the structure of
-# the code including all documentation. Note that this
-# feature is still experimental and incomplete at the
-# moment.
-
-GENERATE_PERLMOD = NO
-
-# If the PERLMOD_LATEX tag is set to YES Doxygen will generate
-# the necessary Makefile rules, Perl scripts and LaTeX code to be able
-# to generate PDF and DVI output from the Perl module output.
-
-PERLMOD_LATEX = NO
-
-# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be
-# nicely formatted so it can be parsed by a human reader.
-# This is useful
-# if you want to understand what is going on.
-# On the other hand, if this
-# tag is set to NO the size of the Perl module output will be much smaller
-# and Perl will parse it just the same.
-
-PERLMOD_PRETTY = YES
-
-# The names of the make variables in the generated doxyrules.make file
-# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.
-# This is useful so different doxyrules.make files included by the same
-# Makefile don't overwrite each other's variables.
-
-PERLMOD_MAKEVAR_PREFIX =
-
-#---------------------------------------------------------------------------
-# Configuration options related to the preprocessor
-#---------------------------------------------------------------------------
-
-# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will
-# evaluate all C-preprocessor directives found in the sources and include
-# files.
-
-ENABLE_PREPROCESSING = YES
-
-# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro
-# names in the source code. If set to NO (the default) only conditional
-# compilation will be performed. Macro expansion can be done in a controlled
-# way by setting EXPAND_ONLY_PREDEF to YES.
-
-MACRO_EXPANSION = YES
-
-# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES
-# then the macro expansion is limited to the macros specified with the
-# PREDEFINED and EXPAND_AS_DEFINED tags.
-
-EXPAND_ONLY_PREDEF = YES
-
-# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files
-# pointed to by INCLUDE_PATH will be searched when a #include is found.
-
-SEARCH_INCLUDES = YES
-
-# The INCLUDE_PATH tag can be used to specify one or more directories that
-# contain include files that are not input files but should be processed by
-# the preprocessor.
-
-INCLUDE_PATH =
-
-# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
-# patterns (like *.h and *.hpp) to filter out the header-files in the
-# directories. If left blank, the patterns specified with FILE_PATTERNS will
-# be used.
-
-INCLUDE_FILE_PATTERNS =
-
-# The PREDEFINED tag can be used to specify one or more macro names that
-# are defined before the preprocessor is started (similar to the -D option of
-# gcc). The argument of the tag is a list of macros of the form: name
-# or name=definition (no spaces). If the definition and the = are
-# omitted =1 is assumed. To prevent a macro definition from being
-# undefined via #undef or recursively expanded use the := operator
-# instead of the = operator.
-
-PREDEFINED = __DOXYGEN__ \
- PROGMEM \
- EEMEM \
- ATTR_PACKED
-
-# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then
-# this tag can be used to specify a list of macro names that should be expanded.
-# The macro definition that is found in the sources will be used.
-# Use the PREDEFINED tag if you want to use a different macro definition that
-# overrules the definition found in the source code.
-
-EXPAND_AS_DEFINED =
-
-# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then
-# doxygen's preprocessor will remove all references to function-like macros
-# that are alone on a line, have an all uppercase name, and do not end with a
-# semicolon, because these will confuse the parser if not removed.
-
-SKIP_FUNCTION_MACROS = YES
-
-#---------------------------------------------------------------------------
-# Configuration::additions related to external references
-#---------------------------------------------------------------------------
-
-# The TAGFILES option can be used to specify one or more tagfiles. For each
-# tag file the location of the external documentation should be added. The
-# format of a tag file without this location is as follows:
-#
-# TAGFILES = file1 file2 ...
-# Adding location for the tag files is done as follows:
-#
-# TAGFILES = file1=loc1 "file2 = loc2" ...
-# where "loc1" and "loc2" can be relative or absolute paths
-# or URLs. Note that each tag file must have a unique name (where the name does
-# NOT include the path). If a tag file is not located in the directory in which
-# doxygen is run, you must also specify the path to the tagfile here.
-
-TAGFILES =
-
-# When a file name is specified after GENERATE_TAGFILE, doxygen will create
-# a tag file that is based on the input files it reads.
-
-GENERATE_TAGFILE =
-
-# If the ALLEXTERNALS tag is set to YES all external classes will be listed
-# in the class index. If set to NO only the inherited external classes
-# will be listed.
-
-ALLEXTERNALS = NO
-
-# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed
-# in the modules index. If set to NO, only the current project's groups will
-# be listed.
-
-EXTERNAL_GROUPS = YES
-
-# The PERL_PATH should be the absolute path and name of the perl script
-# interpreter (i.e. the result of `which perl').
-
-PERL_PATH = /usr/bin/perl
-
-#---------------------------------------------------------------------------
-# Configuration options related to the dot tool
-#---------------------------------------------------------------------------
-
-# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will
-# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base
-# or super classes. Setting the tag to NO turns the diagrams off. Note that
-# this option also works with HAVE_DOT disabled, but it is recommended to
-# install and use dot, since it yields more powerful graphs.
-
-CLASS_DIAGRAMS = NO
-
-# You can define message sequence charts within doxygen comments using the \msc
-# command. Doxygen will then run the mscgen tool (see
-# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the
-# documentation. The MSCGEN_PATH tag allows you to specify the directory where
-# the mscgen tool resides. If left empty the tool is assumed to be found in the
-# default search path.
-
-MSCGEN_PATH =
-
-# If set to YES, the inheritance and collaboration graphs will hide
-# inheritance and usage relations if the target is undocumented
-# or is not a class.
-
-HIDE_UNDOC_RELATIONS = YES
-
-# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
-# available from the path. This tool is part of Graphviz, a graph visualization
-# toolkit from AT&T and Lucent Bell Labs. The other options in this section
-# have no effect if this option is set to NO (the default)
-
-HAVE_DOT = NO
-
-# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is
-# allowed to run in parallel. When set to 0 (the default) doxygen will
-# base this on the number of processors available in the system. You can set it
-# explicitly to a value larger than 0 to get control over the balance
-# between CPU load and processing speed.
-
-DOT_NUM_THREADS = 0
-
-# By default doxygen will use the Helvetica font for all dot files that
-# doxygen generates. When you want a differently looking font you can specify
-# the font name using DOT_FONTNAME. You need to make sure dot is able to find
-# the font, which can be done by putting it in a standard location or by setting
-# the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the
-# directory containing the font.
-
-DOT_FONTNAME = FreeSans
-
-# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.
-# The default size is 10pt.
-
-DOT_FONTSIZE = 10
-
-# By default doxygen will tell dot to use the Helvetica font.
-# If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to
-# set the path where dot can find it.
-
-DOT_FONTPATH =
-
-# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect inheritance relations. Setting this tag to YES will force the
-# CLASS_DIAGRAMS tag to NO.
-
-CLASS_GRAPH = NO
-
-# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for each documented class showing the direct and
-# indirect implementation dependencies (inheritance, containment, and
-# class references variables) of the class with other documented classes.
-
-COLLABORATION_GRAPH = NO
-
-# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen
-# will generate a graph for groups, showing the direct groups dependencies
-
-GROUP_GRAPHS = YES
-
-# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
-# collaboration diagrams in a style similar to the OMG's Unified Modeling
-# Language.
-
-UML_LOOK = NO
-
-# If the UML_LOOK tag is enabled, the fields and methods are shown inside
-# the class node. If there are many fields or methods and many nodes the
-# graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS
-# threshold limits the number of items for each type to make the size more
-# managable. Set this to 0 for no limit. Note that the threshold may be
-# exceeded by 50% before the limit is enforced.
-
-UML_LIMIT_NUM_FIELDS = 10
-
-# If set to YES, the inheritance and collaboration graphs will show the
-# relations between templates and their instances.
-
-TEMPLATE_RELATIONS = NO
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT
-# tags are set to YES then doxygen will generate a graph for each documented
-# file showing the direct and indirect include dependencies of the file with
-# other documented files.
-
-INCLUDE_GRAPH = YES
-
-# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and
-# HAVE_DOT tags are set to YES then doxygen will generate a graph for each
-# documented header file showing the documented files that directly or
-# indirectly include this file.
-
-INCLUDED_BY_GRAPH = YES
-
-# If the CALL_GRAPH and HAVE_DOT options are set to YES then
-# doxygen will generate a call dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable call graphs
-# for selected functions only using the \callgraph command.
-
-CALL_GRAPH = NO
-
-# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then
-# doxygen will generate a caller dependency graph for every global function
-# or class method. Note that enabling this option will significantly increase
-# the time of a run. So in most cases it will be better to enable caller
-# graphs for selected functions only using the \callergraph command.
-
-CALLER_GRAPH = NO
-
-# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen
-# will generate a graphical hierarchy of all classes instead of a textual one.
-
-GRAPHICAL_HIERARCHY = NO
-
-# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
-# then doxygen will show the dependencies a directory has on other directories
-# in a graphical way. The dependency relations are determined by the #include
-# relations between the files in the directories.
-
-DIRECTORY_GRAPH = YES
-
-# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
-# generated by dot. Possible values are svg, png, jpg, or gif.
-# If left blank png will be used. If you choose svg you need to set
-# HTML_FILE_EXTENSION to xhtml in order to make the SVG files
-# visible in IE 9+ (other browsers do not have this requirement).
-
-DOT_IMAGE_FORMAT = png
-
-# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
-# enable generation of interactive SVG images that allow zooming and panning.
-# Note that this requires a modern browser other than Internet Explorer.
-# Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you
-# need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files
-# visible. Older versions of IE do not have SVG support.
-
-INTERACTIVE_SVG = NO
-
-# The tag DOT_PATH can be used to specify the path where the dot tool can be
-# found. If left blank, it is assumed the dot tool can be found in the path.
-
-DOT_PATH =
-
-# The DOTFILE_DIRS tag can be used to specify one or more directories that
-# contain dot files that are included in the documentation (see the
-# \dotfile command).
-
-DOTFILE_DIRS =
-
-# The MSCFILE_DIRS tag can be used to specify one or more directories that
-# contain msc files that are included in the documentation (see the
-# \mscfile command).
-
-MSCFILE_DIRS =
-
-# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of
-# nodes that will be shown in the graph. If the number of nodes in a graph
-# becomes larger than this value, doxygen will truncate the graph, which is
-# visualized by representing a node as a red box. Note that doxygen if the
-# number of direct children of the root node in a graph is already larger than
-# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note
-# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
-
-DOT_GRAPH_MAX_NODES = 15
-
-# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the
-# graphs generated by dot. A depth value of 3 means that only nodes reachable
-# from the root by following a path via at most 3 edges will be shown. Nodes
-# that lay further from the root node will be omitted. Note that setting this
-# option to 1 or 2 may greatly reduce the computation time needed for large
-# code bases. Also note that the size of a graph can be further restricted by
-# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
-
-MAX_DOT_GRAPH_DEPTH = 2
-
-# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
-# background. This is disabled by default, because dot on Windows does not
-# seem to support this out of the box. Warning: Depending on the platform used,
-# enabling this option may lead to badly anti-aliased labels on the edges of
-# a graph (i.e. they become hard to read).
-
-DOT_TRANSPARENT = YES
-
-# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
-# files in one run (i.e. multiple -o and -T options on the command line). This
-# makes dot run faster, but since only newer versions of dot (>1.8.10)
-# support this, this feature is disabled by default.
-
-DOT_MULTI_TARGETS = NO
-
-# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will
-# generate a legend page explaining the meaning of the various boxes and
-# arrows in the dot generated graphs.
-
-GENERATE_LEGEND = YES
-
-# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
-# remove the intermediate dot files that are used to generate
-# the various graphs.
-
-DOT_CLEANUP = YES
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/BuildSystem.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/BuildSystem.txt deleted file mode 100644 index c30a88bb4..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/BuildSystem.txt +++ /dev/null @@ -1,846 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_BuildSystem The LUFA Build System
- *
- * \section Sec_BuildSystemOverview Overview of the LUFA Build System
- * The LUFA build system is an attempt at making a set of re-usable, modular build make files which
- * can be referenced in a LUFA powered project, to minimise the amount of code required in an
- * application makefile. The system is written in GNU Make, and each module is independant of
- * one-another.
- *
- * For details on the prerequisites needed for Linux and Windows machines to be able to use the LUFA
- * build system, see \ref Sec_Prerequisites.
- *
- * To use a LUFA build system module, simply add an include to your project makefile:
- * \code
- * include $(LUFA_PATH)/Build/lufa_core.mk
- * \endcode
- *
- * And the associated build module targets will be added to your project's build makefile automatically.
- * To call a build target, run <tt>make {TARGET_NAME}</tt> from the command line, substituting in
- * the appropriate target name.
- *
- * \see \ref Sec_AppConfigParams for a copy of the sample LUFA project makefile.
- *
- * Each build module may have one or more mandatory parameters (GNU Make variables) which <i>must</i>
- * be supplied in the project makefile for the module to work, and one or more optional parameters which
- * may be defined and which will assume a sensible default if not.
- *
- * \section SSec_BuildSystemModules Available Modules
- *
- * The following modules are included in this LUFA release:
- *
- * \li \subpage Page_BuildModule_ATPROGRAM - Device Programming
- * \li \subpage Page_BuildModule_AVRDUDE - Device Programming
- * \li \subpage Page_BuildModule_BUILD - Compiling/Assembling/Linking
- * \li \subpage Page_BuildModule_CORE - Core Build System Functions
- * \li \subpage Page_BuildModule_CPPCHECK - Static Code Analysis
- * \li \subpage Page_BuildModule_DFU - Device Programming
- * \li \subpage Page_BuildModule_DOXYGEN - Automated Source Code Documentation
- * \li \subpage Page_BuildModule_HID - Device Programming
- * \li \subpage Page_BuildModule_SOURCES - LUFA Module Source Code Variables
- */
-
- /** \page Page_BuildModule_BUILD The BUILD build module
- *
- * The BUILD LUFA build system module, providing targets for the compilation,
- * assembling and linking of an application from source code into binary files
- * suitable for programming into a target device.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_build.mk
- * \endcode
- *
- * \section SSec_BuildModule_BUILD_Requirements Requirements
- * This module requires the the architecture appropriate binaries of the GCC compiler are available in your
- * system's <b>PATH</b> variable. The GCC compiler and associated toolchain is distributed in Atmel AVR Studio
- * 5.x and Atmel Studio 6.x installation directories, as well as in many third party distribution packages.
- *
- * \section SSec_BuildModule_BUILD_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>size</tt></td>
- * <td>Display size of the compiled application FLASH and SRAM segments.</td>
- * </tr>
- * <tr>
- * <td><tt>symbol-sizes</tt></td>
- * <td>Display a size-sorted list of symbols from the compiled application, in decimal bytes.</td>
- * </tr>
- * <tr>
- * <td><tt>check-source</tt></td>
- * <td>Display a list of input SRC source files which cannot be found (if any).</td>
- * </tr>
- * <tr>
- * <td><tt>lib</tt></td>
- * <td>Build and archive all source files into a library A binary file.</td>
- * </tr>
- * <tr>
- * <td><tt>all</tt></td>
- * <td>Build and link the application into ELF debug and HEX binary files.</td>
- * </tr>
- * <tr>
- * <td><tt>elf</tt></td>
- * <td>Build and link the application into an ELF debug file.</td>
- * </tr>
- * <tr>
- * <td><tt>hex</tt></td>
- * <td>Build and link the application and produce HEX and EEP binary files.</td>
- * </tr>
- * <tr>
- * <td><tt>lss</tt></td>
- * <td>Build and link the application and produce a LSS source code/assembly code mixed listing file.</td>
- * </tr>
- * <tr>
- * <td><tt>clean</tt></td>
- * <td>Remove all intermediatary files and binary output files.</td>
- * </tr>
- * <tr>
- * <td><tt>mostlyclean</tt></td>
- * <td>Remove all intermediatary files but preserve any binary output files.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_BUILD_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>TARGET</tt></td>
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>ARCH</tt></td>
- * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
- * </tr>
- * <tr>
- * <td><tt>MCU</tt></td>
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>SRC</tt></td>
- * <td>List of relative or absolute paths to the application C (.c), C++ (.cpp) and Assembly (.S) source files.</td>
- * </tr>
- * <tr>
- * <td><tt>F_USB</tt></td>
- * <td>Speed in Hz of the input clock frequency to the target's USB controller.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_PATH</tt></td>
- * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_BUILD_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><tt>BOARD</tt></td>
- * <td>LUFA board hardware drivers to use (see \ref Page_DeviceSupport).</td>
- * </tr>
- * <tr>
- * <td><tt>OPTIMIZATION</tt></td>
- * <td>Optimization level to use when compiling source files (see GCC manual).</td>
- * </tr>
- * <tr>
- * <td><tt>C_STANDARD</tt></td>
- * <td>Version of the C standard to apply when compiling C++ source files (see GCC manual).</td>
- * </tr>
- * <tr>
- * <td><tt>CPP_STANDARD</tt></td>
- * <td>Version of the C++ standard to apply when compiling C++ source files (see GCC manual).</td>
- * </tr>
- * <tr>
- * <td><tt>DEBUG_FORMAT</tt></td>
- * <td>Format of the debug information to embed in the generated object files (see GCC manual).</td>
- * </tr>
- * <tr>
- * <td><tt>DEBUG_LEVEL</tt></td>
- * <td>Level of the debugging information to embed in the generated object files (see GCC manual).</td>
- * </tr>
- * <tr>
- * <td><tt>F_CPU</tt></td>
- * <td>Speed of the processor CPU clock, in Hz.</td>
- * </tr>
- * <tr>
- * <td><tt>C_FLAGS</tt></td>
- * <td>Flags to pass to the C compiler only, after the automatically generated flags.</td>
- * </tr>
- * <tr>
- * <td><tt>CPP_FLAGS</tt></td>
- * <td>Flags to pass to the C++ compiler only, after the automatically generated flags.</td>
- * </tr>
- * <tr>
- * <td><tt>ASM_FLAGS</tt></td>
- * <td>Flags to pass to the assembler only, after the automatically generated flags.</td>
- * </tr>
- * <tr>
- * <td><tt>CC_FLAGS</tt></td>
- * <td>Common flags to pass to the C/C++ compiler and assembler, after the automatically generated flags.</td>
- * </tr>
- * <tr>
- * <td><tt>LD_FLAGS</tt></td>
- * <td>Flags to pass to the linker, after the automatically generated flags.</td>
- * </tr>
- * <tr>
- * <td><tt>OBJDIR</tt></td>
- * <td>Directory to place the generated object and dependency files. If set to "." the same folder as the source file will be used.
- * \note When this option is enabled, all source filenames <b>must</b> be unique.</td>
- * </tr>
- * <tr>
- * <td><tt>OBJECT_FILES</tt></td>
- * <td>List of additional object files that should be linked into the resulting binary.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_BUILD_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_BUILD_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
-/** \page Page_BuildModule_CORE The CORE build module
- *
- * The core LUFA build system module, providing common build system help and information targets.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_core.mk
- * \endcode
- *
- * \section SSec_BuildModule_CORE_Requirements Requirements
- * This module has no requirements outside a standard *nix shell like environment; the <tt>sh</tt>
- * shell, GNU <tt>make</tt> and *nix CoreUtils (<tt>echo</tt>, <tt>printf</tt>, etc.).
- *
- * \section SSec_BuildModule_CORE_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>help</tt></td>
- * <td>Display build system help and configuration information.</td>
- * </tr>
- * <tr>
- * <td><tt>list_targets</tt></td>
- * <td>List all available build targets from the build system.</td>
- * </tr>
- * <tr>
- * <td><tt>list_modules</tt></td>
- * <td>List all available build modules from the build system.</td>
- * </tr>
- * <tr>
- * <td><tt>list_mandatory</tt></td>
- * <td>List all mandatory parameters required by the included modules.</td>
- * </tr>
- * <tr>
- * <td><tt>list_optional</tt></td>
- * <td>List all optional parameters required by the included modules.</td>
- * </tr>
- * <tr>
- * <td><tt>list_provided</tt></td>
- * <td>List all variables provided by the included modules.</td>
- * </tr>
- * <tr>
- * <td><tt>list_macros</tt></td>
- * <td>List all macros provided by the included modules.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CORE_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CORE_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CORE_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CORE_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
-/** \page Page_BuildModule_ATPROGRAM The ATPROGRAM build module
- *
- * The ATPROGRAM programming utility LUFA build system module, providing targets to reprogram an
- * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_atprogram.mk
- * \endcode
- *
- * \section SSec_BuildModule_ATPROGRAM_Requirements Requirements
- * This module requires the <tt>atprogram.exe</tt> utility to be available in your system's <b>PATH</b>
- * variable. The <tt>atprogram.exe</tt> utility is distributed in Atmel AVR Studio 5.x and Atmel Studio 6.x
- * inside the application install folder's "\avrdbg" subdirectory.
- *
- * \section SSec_BuildModule_ATPROGRAM_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>atprogram</tt></td>
- * <td>Program the device FLASH memory with the application's executable data.</td>
- * </tr>
- * <tr>
- * <td><tt>atprogram-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_ATPROGRAM_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>MCU</tt></td>
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>TARGET</tt></td>
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_ATPROGRAM_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><tt>ATPROGRAM_PROGRAMMER</tt></td>
- * <td>Name of the Atmel programmer or debugger tool to communicate with (e.g. <tt>jtagice3</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>ATPROGRAM_INTERFACE</tt></td>
- * <td>Name of the programming interface to use when programming the target (e.g. <tt>spi</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>ATPROGRAM_PORT</tt></td>
- * <td>Name of the communication port to use when when programming with a serially connected tool (e.g. <tt>COM2</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_ATPROGRAM_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_ATPROGRAM_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
-/** \page Page_BuildModule_AVRDUDE The AVRDUDE build module
- *
- * The AVRDUDE programming utility LUFA build system module, providing targets to reprogram an
- * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_avrdude.mk
- * \endcode
- *
- * \section SSec_BuildModule_AVRDUDE_Requirements Requirements
- * This module requires the <tt>avrdude</tt> utility to be available in your system's <b>PATH</b>
- * variable. The <tt>avrdude</tt> utility is distributed in the old WinAVR project releases for
- * Windows (<a>winavr.sourceforge.net</a>) or can be installed on *nix systems via the project's
- * source code (<a>https://savannah.nongnu.org/projects/avrdude</a>) or through the package manager.
- *
- * \section SSec_BuildModule_AVRDUDE_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>avrdude</tt></td>
- * <td>Program the device FLASH memory with the application's executable data.</td>
- * </tr>
- * <tr>
- * <td><tt>avrdude</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_AVRDUDE_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>MCU</tt></td>
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>TARGET</tt></td>
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_AVRDUDE_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><tt>AVRDUDE_PROGRAMMER</tt></td>
- * <td>Name of the programmer or debugger tool to communicate with (e.g. <tt>jtagicemkii</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>ATPROGRAM_PORT</tt></td>
- * <td>Name of the communication port to use when when programming with the connected tool (e.g. <tt>COM2</tt>, <tt>/dev/ttyUSB0</tt> or <tt>usb</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>ATPROGRAM_FLAGS</tt></td>
- * <td>Additional flags to pass to avrdude when programming, applied after the automatically generated flags.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_AVRDUDE_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_AVRDUDE_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
- /** \page Page_BuildModule_CPPCHECK The CPPCHECK build module
- *
- * The CPPCHECK programming utility LUFA build system module, providing targets to statically
- * analyze C and C++ source code for errors and performance/style issues.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_cppcheck.mk
- * \endcode
- *
- * \section SSec_BuildModule_CPPCHECK_Requirements Requirements
- * This module requires the <tt>cppcheck</tt> utility to be available in your system's <b>PATH</b>
- * variable. The <tt>cppcheck</tt> utility is distributed through the project's home page
- * (<a>http://cppcheck.sourceforge.net</a>) for Windows, and can be installed on *nix systems via
- * the project's source code or through the package manager.
- *
- * \section SSec_BuildModule_CPPCHECK_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>cppcheck</tt></td>
- * <td>Statically analyze the project source code for issues.</td>
- * </tr>
- * <tr>
- * <td><tt>cppcheck-config</tt></td>
- * <td>Check the <tt>cppcheck</tt> configuration - scan source code and warn about missing header files and other issues.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CPPCHECK_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>SRC</tt></td>
- * <td>List of source files to statically analyze.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CPPCHECK_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><tt>CPPCHECK_INCLUDES</tt></td>
- * <td>Path of extra directories to check when attemting to resolve C/C++ header file includes.</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_EXCLUDES</tt></td>
- * <td>Paths or path fragments to exclude when analyzing.</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_MSG_TEMPLATE</tt></td>
- * <td>Output message template to use when printing errors, warnings and information (see <tt>cppcheck</tt> documentation).</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_ENABLE</tt></td>
- * <td>Analysis rule categories to enable (see <tt>cppcheck</tt> documentation).</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_SUPPRESS</tt></td>
- * <td>Specific analysis rules to suppress (see <tt>cppcheck</tt> documentation).</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_FAIL_ON_WARNING</tt></td>
- * <td>Set to <b>Y</b> to fail the analysis job with an error exit code if warnings are found, <b>N</b> to continue without failing.</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_QUIET</tt></td>
- * <td>Set to <b>Y</b> to suppress all output except warnings and errors, <b>N</b> to show verbose output information.</td>
- * </tr>
- * <tr>
- * <td><tt>CPPCHECK_FLAGS</tt></td>
- * <td>Extra flags to pass to <tt>cppcheck</tt>, after the automatically generated flags.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CPPCHECK_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_CPPCHECK_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
- /** \page Page_BuildModule_DFU The DFU build module
- *
- * The DFU programming utility LUFA build system module, providing targets to reprogram an
- * Atmel processor FLASH and EEPROM memories with a project's compiled binary output files.
- * This module requires a DFU class bootloader to be running in the target, compatible with
- * the DFU bootloader protocol as published by Atmel.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_dfu.mk
- * \endcode
- *
- * \section SSec_BuildModule_DFU_Requirements Requirements
- * This module requires either the <tt>batchisp</tt> utility from Atmel's FLIP utility, or the open
- * source <tt>dfu-programmer</tt> utility (<a>http://dfu-programmer.sourceforge.net/</a>) to be
- * available in your system's <b>PATH</b> variable. On *nix systems the <tt>dfu-programmer</tt> utility
- * can be installed via the project's source code or through the package manager.
- *
- * \section SSec_BuildModule_DFU_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>dfu</tt></td>
- * <td>Program the device FLASH memory with the application's executable data using <tt>dfu-programmer</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>dfu-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>dfu-programmer</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>flip</tt></td>
- * <td>Program the device FLASH memory with the application's executable data using <tt>batchisp</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>flip-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>batchisp</tt>.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DFU_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>MCU</tt></td>
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>TARGET</tt></td>
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DFU_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DFU_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DFU_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
- /** \page Page_BuildModule_DOXYGEN The DOXYGEN build module
- *
- * The DOXYGEN code documentation utility LUFA build system module, providing targets to generate
- * project HTML and other format documentation from a set of source files that include special
- * Doxygen comments.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_doxygen.mk
- * \endcode
- *
- * \section SSec_BuildModule_DOXYGEN_Requirements Requirements
- * This module requires the <tt>doxygen</tt> utility from the Doxygen website
- * (<a>http://www.stack.nl/~dimitri/doxygen/</a>) to be available in your system's <b>PATH</b>
- * variable. On *nix systems the <tt>doxygen</tt> utility can be installed via the project's source
- * code or through the package manager.
- *
- * \section SSec_BuildModule_DOXYGEN_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>doxygen</tt></td>
- * <td>Generate project documentation.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DOXYGEN_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>LUFA_PATH</tt></td>
- * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DOXYGEN_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><tt>DOXYGEN_CONF</tt></td>
- * <td>Name and path of the base Doxygen configuration file for the project.</td>
- * </tr>
- * <tr>
- * <td><tt>DOXYGEN_FAIL_ON_WARNING</tt></td>
- * <td>Set to <b>Y</b> to fail the generation with an error exit code if warnings are found other than unsupported configuration parameters, <b>N</b> to continue without failing.</td>
- * </tr>
- * <tr>
- * <td><tt>DOXYGEN_OVERRIDE_PARAMS</tt></td>
- * <td>Extra Doxygen configuration parameters to apply, overriding the corresponding config entry in the project's configuration file (e.g. <tt>QUIET=YES</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DOXYGEN_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_DOXYGEN_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
- /** \page Page_BuildModule_HID The HID build module
- *
- * The HID programming utility LUFA build system module, providing targets to reprogram an
- * Atmel processor's FLASH memory with a project's compiled binary output file. This module
- * requires a HID class bootloader to be running in the target, using a protocol compatible
- * with the PJRC "HalfKay" protocol (<a>http://www.pjrc.com/teensy/halfkay_protocol.html</a>).
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_hid.mk
- * \endcode
- *
- * \section SSec_BuildModule_HID_Requirements Requirements
- * This module requires either the <tt>hid_bootloader_cli</tt> utility from the included LUFA HID
- * class bootloader API subdirectory, or the <tt>teensy_loader_cli</tt> utility from PJRC
- * (<a>http://www.pjrc.com/teensy/loader_cli.html</a>) to be available in your system's <b>PATH</b>
- * variable.
- *
- * \section SSec_BuildModule_HID_Targets Targets
- *
- * <table>
- * <tr>
- * <td><tt>hid</tt></td>
- * <td>Program the device FLASH memory with the application's executable data using <tt>hid_bootloader_cli</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>hid-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>hid_bootloader_cli</tt> and
- * a temporary AVR application programmed into the target's FLASH.
- * \note This will erase the currently loaded application in the target.</td>
- * </tr>
- * <tr>
- * <td><tt>teensy</tt></td>
- * <td>Program the device FLASH memory with the application's executable data using <tt>teensy_loader_cli</tt>.</td>
- * </tr>
- * <tr>
- * <td><tt>teensy-ee</tt></td>
- * <td>Program the device EEPROM memory with the application's EEPROM data using <tt>teensy_loader_cli</tt> and
- * a temporary AVR application programmed into the target's FLASH.
- * \note This will erase the currently loaded application in the target.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_HID_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>MCU</tt></td>
- * <td>Name of the Atmel processor model (e.g. <tt>at90usb1287</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>TARGET</tt></td>
- * <td>Name of the application output file prefix (e.g. <tt>TestApplication</tt>).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_HID_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_HID_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_HID_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
-
- /** \page Page_BuildModule_SOURCES The SOURCES build module
- *
- * The SOURCES LUFA build system module, providing variables listing the various LUFA source files
- * required to be build by a project for a given LUFA module. This module gives a way to reference
- * LUFA source files symbollically, so that changes to the library structure do not break the library
- * makefile.
- *
- * To use this module in your application makefile, add the following code:
- * \code
- * include $(LUFA_PATH)/Build/lufa_sources.mk
- * \endcode
- *
- * \section SSec_BuildModule_SOURCES_Requirements Requirements
- * None.
- *
- * \section SSec_BuildModule_SOURCES_Targets Targets
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_SOURCES_MandatoryParams Mandatory Parameters
- *
- * <table>
- * <tr>
- * <td><tt>LUFA_PATH</tt></td>
- * <td>Path to the LUFA library core, either relative or absolute (e.g. <tt>../LUFA-000000/LUFA/</tt>).</td>
- * </tr>
- * <tr>
- * <td><tt>ARCH</tt></td>
- * <td>Architecture of the target processor (see \ref Page_DeviceSupport).</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_SOURCES_OptionalParams Optional Parameters
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_SOURCES_ProvidedVariables Module Provided Variables
- *
- * <table>
- * <tr>
- * <td><tt>LUFA_SRC_USB</tt></td>
- * <td>List of LUFA USB driver source files.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_SRC_USBCLASS</tt></td>
- * <td>List of LUFA USB Class driver source files.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_SRC_TEMPERATURE</tt></td>
- * <td>List of LUFA temperature sensor driver source files.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_SRC_SERIAL</tt></td>
- * <td>List of LUFA Serial U(S)ART driver source files.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_SRC_TWI</tt></td>
- * <td>List of LUFA TWI driver source files.</td>
- * </tr>
- * <tr>
- * <td><tt>LUFA_SRC_PLATFORM</tt></td>
- * <td>List of LUFA architecture specific platform management source files.</td>
- * </tr>
- * </table>
- *
- * \section SSec_BuildModule_SOURCES_ProvidedMacros Module Provided Macros
- *
- * <table>
- * <tr>
- * <td><i>None</i></td>
- * </tr>
- * </table>
- */
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/BuildingLinkableLibraries.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/BuildingLinkableLibraries.txt deleted file mode 100644 index ff5fdc523..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/BuildingLinkableLibraries.txt +++ /dev/null @@ -1,23 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_BuildLibrary Building as a Linkable Library
- *
- * The LUFA library can be built as a proper linkable library (with the extention .a) under AVR-GCC, so that
- * the library does not need to be recompiled with each revision of a user project. Instructions for creating
- * a library from a given source tree can be found in the AVR-GCC user manual included in the WinAVR install
- * /Docs/ directory.
- *
- * However, building the library is <b>not recommended</b>, as the static (compile-time) options will be
- * unable to be changed without a recompilation of the LUFA code. Therefore, if the library is to be built
- * from the LUFA source, it should be made to be application-specific and compiled with the static options
- * that are required for each project (which should be recorded along with the library).
- *
- * Normal library use has the library components compiled in at the same point as the application code, as
- * demonstrated in the library demos and applications. This is the preferred method, as the library is recompiled
- * each time to ensure that all static options for a particular application are applied.
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ChangeLog.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ChangeLog.txt deleted file mode 100644 index 51786b9be..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ChangeLog.txt +++ /dev/null @@ -1,1444 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
- /** \page Page_ChangeLog Project Changelog
- *
- * \section Sec_ChangeLog120730 Version 120730
- * <b>New:</b>
- * - Core:
- * - Added new, revamped modular build system with new makefile templates
- * - Added support for the BitWizard Multio and Big-Multio boards
- * - Added support for the DorkbotPDX Duce board
- * - Added support for the Olimex AVR-USB-32U4 board
- * - Added support for the Olimex AVR-USB-T32U4 board
- * - Added support for the Olimex AVR-ISP-MK2 board
- * - Added new Endpoint_ConfigureEndpointTable() function
- * - Added new Pipe_ConfigurePipeTable() function
- * - Added build test to verify correct compilation of all board drivers using all driver APIs
- * - Added build test to verify correct compilation of all bootloaders using all supported devices
- * - Added build test to verify that there are no detectable errors in the codebase via static analysis
- * - Added new JTAG_ENABLE() macro for the AVR8 architecture
- * - Library Applications:
- * - Modified the CDC Host demos to set a default CDC Line Encoding on enumerated devices
- * - Added Dataflash operational checks and aborts to all projects using the Dataflash to ensure it is working correctly before use
- * - Added new SerialToLCD user project contributed by Simon Foster
- * - Added new RESET_TOGGLES_LIBUSB_COMPAT compile time option to the AVRISP-MKII clone programmer project (thanks to Robert Spitzenpfeil)
- *
- * <b>Changed:</b>
- * - Core:
- * - Android Accessory Host property strings changed from a struct of pointer to an array to prevent unaligned access on greater than 8-bit architectures
- * - Audio Device Class driver changed to also require the index of the Audio Control interface within the device, for SET/GET/CUR/MIN/MAX/RES property adjustments
- * - Removed variable axis support from the HID_DESCRIPTOR_JOYSTICK() macro due to OS incompatibilities, replaced with fixed 3-axis joystick report structure
- * - Removed the old pseudo-scheduler from the library as it was unused and deprecated since the 090810 release
- * - Endpoint indexes are now specified as full endpoint addresses within the device in device mode, rather than a logical index
- * - The Endpoint_ConfigureEndpoint() function no longer takes an endpoint direction as a parameter, as this is now deduced from the specified full endpoint
- * address and type
- * - The Endpoint_ConfigureEndpoint() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter
- * - Endpoints are now configured via instances of a new struct USB_Endpoint_Table_t in all device mode class drivers, rather than a list of endpoint parameters
- * - Pipe indexes are now specified as full pipe addresses within the host in host mode, rather than a logical index
- * - The Pipe_ConfigurePipe() function no longer takes an pipe token as a parameter, as this is now deduced from the specified full pipe address and type
- * - The Pipe_ConfigurePipe() function no longer takes a number of banks as a special mask; the number of banks is now specified as an integer parameter
- * - Pipes are now configured via instances of a new struct USB_Pipe_Table_t in all host mode class drivers, rather than a list of pipe parameters
- * - Added support for various assert and debugging macros for the UC3 devices
- * - Changed MIDI event structure MIDI_EventPacket_t to use a single field for the combined virtual cable index and command ID, to prevent bitfield packing issues
- * on some architectures (thanks to Darren Gibbs)
- * - Changed board LED driver implementations of LEDs_ToggleLEDs() for the AVR8 architecture to use the fast PIN register toggle alternative function for speed
- * - Library Applications:
- * - Raised the guard bits in the AVRISP-MKII clone project when in PDI and TPI to 32, to prevent communication errors on low quality connections to a target
- * - Added additional bootloader API data to expose the bootloader start address and class to the DFU and CDC class bootloaders
- * - Reverted AVRISP-MKII clone project watchdog based command timeout patch in favour of a hardware timer, to allow for use in devices with WDTRST fuse programmed
- * - The library bootloaders will now correctly start the user application after a watchdog-based application start, even if the /HWB line is held low externally
- * during the reset phase
- * - Increased endpoint polling interval for all demos and projects to 5ms, as 1ms was causing some enumeration issues on some machines (thanks to Riku Salminen)
- *
- * <b>Fixed:</b>
- * - Core:
- * - Fixed possible enumeration error if the user application selects a pipe other than the default Control pipe between the Powered and Default states of
- * the host state machine
- * - Fixed incorrect call to the user callback CALLBACK_Audio_Device_GetSetInterfaceProperty() in the Audio Class device driver (thanks to Tiit Ratsep)
- * - Fixed compile error for the UC3 architecture when INTERRUPT_CONTROL_ENDPOINT is specified (thanks to Andrus Aaslaid)
- * - Fixed compile error if LEDs_Disable() is called and BOARD=NONE is set (thanks to Sam Lin)
- * - Fixed inverted LED logic in the OLIMEX162 board LED driver
- * - Fixed incorrect reponse to GET STATUS requests in device mode if NO_DEVICE_SELF_POWER or NO_DEVICE_REMOTE_WAKEUP tokens are defined (thanks to Georg Glock)
- * - Fixed inverted LED logic in the USB2AX board LED driver
- * - Fixed possible deadlock in the CDC device driver if the USB connection is dropped while the CDC_REQ_SetLineEncoding control request is being processed by
- * the stack (thanks to Jonathan Hudgins)
- * - Fixed broken MIDI host driver MIDI_Host_ReceiveEventPacket() function due to not unfreezing the MIDI data IN pipe before use (thanks to Michael Brown)
- * - Fixed swapped Little Endian/Big Endian endpoint and pipe write code for the UC3 devices (thanks to Andrew Chu)
- * - Fixed the JTAG_DISABLE() macro clearing all other bits in MCUSR when called
- * - Fixed incorrect Micropendous board LED driver LEDs_SetAllLEDs() and LEDs_ChangeLEDs() function implementations (thanks to MitchJS)
- * - Fixed endianess issues in the RNDIS host class driver for UC3 devices (thanks to Andrew Chu)
- * - Library Applications:
- * - Fixed error in the AVRISP-MKII programmer when ISP mode is used at 64KHz (thanks to Ben R. Porter)
- * - Fixed AVRISP-MKII programmer project failing to compile for the U4 chips when VTARGET_ADC_CHANNEL is defined to an invalid channel and NO_VTARGET_DETECT is
- * defined (thanks to Steven Morehouse)
- * - Fixed AVRISP-MKII programmer project reset line polarity inverted when the generated EEP file is loaded into the USB AVR's EEPROM and avr-dude is used
- * - Fixed CDC and DFU bootloaders failing to compile when the bootloader section size is 8KB or more (thanks to Georg Glock)
- * - Fixed CDC and DFU bootloaders API function offsets incorrect on some devices (thanks to Rod DeMay)
- * - Fixed incorrect DFU version number reported to the host in the DFU bootloader descriptors (thanks to Georg Glock)
- * - Fixed incorrect version hundredths value encoding in VERSION_BCD() macro (thanks to Georg Glock)
- * - Fixed invalid configuration descriptor in the low level KeyboardMouse device demo (thanks to Jun Wako)
- * - Fixed CDC and DFU bootloaders API page erase and write function failures (thanks to Martin Lambert)
- *
- * \section Sec_ChangeLog120219 Version 120219
- * <b>New:</b>
- * - Core:
- * - Added support for the XMEGA A3BU Xplained board
- * - Added support for the new B series XMEGA devices
- * - Added support for version 2 of the Teensy boards (thanks to Christoph Redecker)
- * - Added support for the USB2AX boards, hardware revision 1-3
- * - Added new Android Accessory Host class driver
- * - Added new USB_Host_GetDescriptor(), USB_Host_GetDeviceConfiguration() and USB_Host_GetInterfaceAltSetting() functions
- * - Added new CALLBACK_Audio_Device_GetSetInterfaceProperty() callback to the Audio Device Class driver
- * - Added new LEDs_Disable(), Buttons_Disable() and Joystick_Disable() functions to the board hardware drivers
- * - Added support for the Micropendous family of boards (Arduino-like revisions 1 and 2, DIP, 32U2, A, 1, 2, 3 and 4)
- * - Added INVERTED_VBUS_ENABLE_LINE and NO_AUTO_VBUS_MANAGEMENT compile time options (thanks to Opendous Inc.)
- * - Added support for the Atmel XMEGA B1 Xplained board
- * - Added Serial USART peripheral driver for the XMEGA architecture
- * - Added Master Mode SPI USART peripheral driver for the XMEGA and AVR8 architectures
- * - Added build test to verify correct compilation of as many modules as possible under as many architectures as possible under the C and C++ languages
- * - Added build test to verify correct compilation of the USB driver when forced into single USB mode under as many architectures as possible
- * - Library Applications:
- * - Added User Application APIs to the CDC and DFU class bootloaders
- * - Added INVERTED_ISP_MISO compile time option to the AVRISP-MKII clone project (thanks to Chuck Rohs)
- * - Added new Android Accessory Host demo (thanks to Opendous Inc.)
- *
- * <b>Changed:</b>
- * - Core:
- * - When automatic PLL management mode is enabled on the U4 series AVR8 chips, the PLL is now configured for 48MHz and not
- * a divided 96MHz, to lower power consumption and to keep the system within the datasheet specs for 3.3V operation (thanks to Scott Vitale)
- * - Added Class, ClassDevice, ClassHost and ClassCommon to the internal class driver source filenames to prevent ambiguities
- * - Altered the Mass Storage Host class driver so that SCSI data STALLs from the attached device can be recovered from automatically without
- * having to reset the Mass Storage interface
- * - USB_CONFIG_ATTR_BUSPOWERED constant renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed (thanks to NXP Semiconductors)
- * - Reordered board name definition indexes so that a mispelled BOARD compile option will default to BOARD_USER rather than BOARD_USBKEY
- * - Altered the HID class driver to only try to construct at maximum one packet per USB frame, to reduce CPU usage
- * - All USB Class Driver configuration struct values are now non-const, to allow for run-time modifications if required before configuring an instance
- * - Library Applications:
- * - Altered the Mass Storage Host LowLevel demo so that SCSI data STALLs from the attached device can be recovered from automatically without
- * having to reset the Mass Storage interface
- * - Updated the AVRISP-MKII Clone programmer project to be compatible with the latest version of AVR Studio (version 5.1)
- * - Changed the AVRISP-MKII Clone programmer project to report a fixed 3.3V VTARGET voltage on USB AVRs lacking an ADC instead of 5V to prevent
- * warnings in AVR Studio 5.1 when programming XMEGA devices
- * - Allow serial strings to be generated on the older AVR8 devices which do not explicitly state they contain unique values in the datasheet,
- * as this appears to be implemented in hardware
- *
- * <b>Fixed:</b>
- * - Core:
- * - Fixed ring buffer size limited to 255 elements, instead of the intended 65535 elements.
- * - Fixed CDC class drivers not saving and sending all 16-bits of the control line states (thanks to Matthew Swabey)
- * - Fixed race conditions in the CDC, HID and Mass Storage class drivers when processing some control requests
- * - Fixed misspelled HID_KEYBOARD_MODIFIER_* macros in the HID class driver (thanks to Laszlo Monda)
- * - Fixed broken AVR32 endpoint/pipe communications when ORDERED_EP_CONFIG compile time option is not enabled (thanks to Matthias Jahr)
- * - Fixed broken compilation for the AVR32 devices if the NO_SOF_EVENTS compile time option was not enabled (thanks to Matthias Jahr)
- * - Fixed compiler warning on GCC with \c -wundef compile flag is used (thanks to Georg Glock)
- * - Fixed incorrect implementation of LEDs_ToggleLEDs() for the Adafruit-U4 board (thanks to Caroline Saliman)
- * - Fixed broken compilation of LUFA under C++ compilers when the Serial peripheral module header file is included in a C++ source file
- * - Fixed missing semicolon in the UC3 architecture host pipe functions
- * - Fixed failed compilation for the XMEGA architecture if USB_DEVICE_ONLY us not specified
- * - Fixed UC3 architecture ignoring the pipe size when Pipe_ConfigurePipe() is called
- * - Library Applications:
- * - Added reliability patches to the AVRISP-MKII Clone project's PDI/TPI protocols (thanks to Justin Mattair)
- * - Fixed AVRISP-MKII Clone compile warning on AVR8 U4 targets even when NO_VTARGET_DETECT is enabled
- * - Fixed AVRISP-MKII Clone failing to start application firmware once a TPI programming session is exited
- * - Fixed DFU class bootloader not resetting the LED pins as high impedance inputs when a software jump to the user applications is requested
- * - Fixed AVRISP-MKII Clone timing out on long programming commands such as programming the EEPROM on an ATMEGA8 (thanks to Martin Kelling)
- * - Fixed invalid PID value used in the TempDataLogger project host application (thanks to Anupam Pathak)
- *
- * \section Sec_ChangeLog111009 Version 111009
- * <b>New:</b>
- * - Core:
- * - Added USE_LUFA_CONFIG_HEADER compile time option to include a LUFAConfig.h header in the user director for LUFA configuration
- * tokens as an alternative to tokens defined in the project makefile
- * - Added new USB_Host_SetInterfaceAltSetting() convenience function for the selection of an interface's alternative setting
- * - Added Audio class control request definitions
- * - Added new CALLBACK_Audio_Device_GetSetEndpointProperty() callback to the Audio Device Class driver to allow for endpoint control manipulations
- * such as data sample rates
- * - Added support for the Audio class GET STATUS request in the Audio Device Class driver so that it is correctly ACKed when sent by the host
- * - Added new EVENT_Audio_Device_StreamStartStop() event to the Audio Device Class driver to detect stream start/stop events
- * - Added board driver support for the Busware TUL board
- * - Added board hardware driver support for the EVK1100 board
- * - Added board hardware driver support for the EVK1104 board
- * - Added new Host mode Audio Class driver
- * - Added new SPI_GetCurrentMode() function to the SPI peripheral driver
- * - Added RingBuffer_GetFreeCount() function to the Ring Buffer driver
- * - Added new HID_Host_SetIdlePeriod() function to the HID Host Class driver
- * - Added new USB_Host_ConfigurationNumber global variable to indicate the selected configuration in an attached device
- * - Added new USB_Host_GetDeviceStatus() function to the host standard request function set
- * - Added AVR USB XMEGA architecture port (currently incomplete/experimental)
- * - Added new STRINGIFY() and STRINGIFY_EXPANDED() convenience macros
- * - Added new JTAG_DISABLE() macro for the AVR8 architecture
- * - Added Device Qualifier standard descriptor structure definitions USB_StdDescriptor_DeviceQualifier_t and USB_Descriptor_DeviceQualifier_t
- * - Library Applications:
- * - Added RNDIS device mode to the Webserver project
- * - Added new incomplete AndroidAccessoryHost Host LowLevel demo
- * - Added new HIDReportViewer project
- * - Added new MediaControl project
- * - Added new AudioInputHost Host ClassDriver demo
- * - Added new AudioOutputHost Host ClassDriver demo
- * - Added new AudioInputHost Host LowLevel demo
- * - Added new AudioOutputHost Host LowLevel demo
- * - Added new "checksource" target to all library project makefiles
- * - Added new VTARGET_USE_INTERNAL_REF configuration option to the AVRISP-MKII clone project (thanks to Volker Bosch)
- *
- * <b>Changed:</b>
- * - Core:
- * - Altered the definition of the USB_Audio_Descriptor_Format_t descriptor so that the user is now responsible for supplying
- * the supported audio sampling rates, to allow for multiple audio interfaces with different numbers of supported rates and/or
- * continuous sample rates
- * - Pipe_BoundEndpointNumber() has been renamed to Pipe_GetBoundEndpointAddress(), and now returns the correct endpoint direction
- * as part of the endpoint address
- * - Renamed global state variables that are specific to a certain USB mode to clearly indicate which mode the variable relates to,
- * by changing the USB_* prefix to USB_Device_* or USB_Host_*
- * - Removed the HOST_STATE_WaitForDeviceRemoval and HOST_STATE_Suspended host state machine states, as these are no longer required
- * - Altered the USB_Host_SetDeviceConfiguration() function to update the global Host state machine state and the new
- * USB_Host_ConfigurationNumber global as required
- * - Added endian correcting code to the library USB class drivers for multiple architecture support
- * - Removed the ENDPOINT_DESCRIPTOR_DIR_* macros, replaced by ENDPOINT_DIR_* instead
- * - Renamed the JTAG_DEBUG_ASSERT() macro to JTAG_ASSERT()
- * - Added variable number of axis to HID_DESCRIPTOR_JOYSTICK() for multi-axis joysticks above just X and Y
- * - Renamed USB_Host_ClearPipeStall() to USB_Host_ClearEndpointStall() as the function works on an endpoint address within the attached device,
- * and not a Pipe within the host
- * - The MS_Host_ResetMSInterface() now performs a full Mass Storage reset sequence to prevent data corruption in the event of a device
- * lock up or timeout (thanks to David Lyons)
- * - Added endian-correction to the CDC driver's Line Encoding control request handlers.
- * - Library Applications:
- * - Modified the Low Level and Class Driver AudioInput and AudioOutput demos to support multiple audio sample rates
- * - Updated all host mode demos and projects to use the EVENT_USB_Host_DeviceEnumerationComplete() event callback for device configuration
- * instead of manual host state machine manipulations in the main application task
- * - Changed the reports in the GenericHID device demos to control the board LEDs, to reduce user confusion over the callback routines
- * - Added reliability patches to the AVRISP-MKII Clone project's ISP and PDI/TPI protocols (thanks to Justin Mattair)
- *
- * <b>Fixed:</b>
- * - Core:
- * - Large number of documentation and code comment corrections (thanks to Andrey from Microsin.ru)
- * - Fixed possibility of the AVR's SPI interface being pulled out of master mode if the /SS pin is a input and pulled low (thanks
- * to Andrey from Microsin.ru)
- * - Fixed compile error when FIXED_CONTROL_ENDPOINT_SIZE compile time option was disabled, and a USE_*_DESCRIPTORS compile time
- * option was not enabled on the AVR8s
- * - Fixed lack of C++ compatibility in some internal header files causing compile errors when using LUFA in C++ projects
- * - Fixed error in the pipe unordered allocation algorithm for the AVR8 devices breaking compatibility with some devices
- * - Fixed USB_USBTask not being called internally in stream transfers between packets when Partial Stream Transfers are used
- * - Fixed swapped TWI_ADDRESS_READ and TWI_ADDRESS_WRITE values
- * - Fixed TWI_ReadPacket() not releasing the TWI bus on read completion
- * - Fixed optimization error in the HID Parser item value USB_SetHIDReportItemInfo() and USB_GetHIDReportItemInfo() routines if the report item was
- * \c NULL (which should be allowable according to the API)
- * - Fixed HID Parser CALLBACK_HIDParser_FilterHIDReportItem() callback function not being passed a cacheable report item pointer
- * - Fixed HID Parser's largest report size bit count not including the size of the last parsed report item
- * - Fixed HID host driver's largest HID report size count corrupt when the number of report bits exceeds 255
- * - Library Applications:
- * - Fixed incorrect signature in the CDC and DFU class bootloaders for the ATMEGA8U2
- * - Fixed KeyboardHost and KeyboardHostWithParser demos displaying incorrect values when numerical keys were pressed
- * - Fixed compile errors in the incomplete BluetoothHost demo application (thanks to Timo Lindfors)
- * - Fixed incorrect Dataflash buffer use in the DataflashManager_WriteBlocks_RAM() function of several demos/projects (thanks to Jeremy Willden)
- * - Fixed incorrect logging interval (always 500ms longer than requested) in the TempDataLogger project
- * - Fixed incorrect buffer size check in the USBtoSerial project (thanks to Yuri A Nikiforov)
- * - Fixed port state table corruption in the TCP layer of the RNDIS Ethernet device demos
- *
- * \section Sec_ChangeLog110528 Version 110528
- * <b>New:</b>
- * - Core:
- * - Added new ORDERED_EP_CONFIG compile time option to restrict endpoint/pipe configuration to ascending order
- * in exchange for a smaller compiled program binary size
- * - Added a new general RingBuff.h miscellaneous ring buffer library driver header
- * - Added new GCC_FORCE_POINTER_ACCESS() macro to correct GCC's mishandling of struct pointer accesses
- * - Added new GCC_MEMORY_BARRIER() macro to prevent instruction reordering across boundaries
- * - Added basic driver example use code to the library documentation
- * - Added new Endpoint_Null_Stream() and Pipe_Null_Stream() functions
- * - Added new ADC_GET_CHANNEL_MASK() convenience macro
- * - Added new HID report item macros (with HID_RI_ prefix) to allow for easy creation and editing of HID report descriptors
- * - Added new HID_DESCRIPTOR_MOUSE(), HID_DESCRIPTOR_KEYBOARD(), HID_DESCRIPTOR_JOYSTICK() and HID_DESCRIPTOR_VENDOR() macros
- * for easy automatic creation of basic USB HID device reports
- * - Added new MAX() and MIN() convenience macros
- * - Added new Serial_SendData() function to the Serial driver
- * - Added board driver support for the Sparkfun ATMEGA8U2 breakout board
- * - Added TWI baud rate prescaler and bit length parameters to the TWI_Init() function (thanks to Thomas Herlinghaus)
- * - Internal restructuring for eventual multiple architecture ports
- * - Added AVR32 UC3 architecture port (currently incomplete/experimental)
- * - Added new architecture independent functions to enable, disable, save and restore the Global Interrupt Enable flags
- * - Added new RNDIS Device Class Driver packet send and receive functions
- * - Library Applications:
- * - Added ability to write protect Mass Storage disk write operations from the host OS
- * - Added new MIDIToneGenerator project
- * - Added new KeyboardMouseMultiReport Device ClassDriver demo
- * - Added new VirtualSerialMassStorage Device ClassDriver demo
- * - Added HID class bootloader, compatible with a modified version of the command line Teensy loader from PJRC.com
- * - Added LED flashing to the CDC and DFU class bootloaders to indicate when they are running
- *
- * <b>Changed:</b>
- * - Core:
- * - Unordered Endpoint/Pipe configuration is now allowed once again by default via the previous reconfig workaround
- * - Refactored Host mode Class Driver *_Host_ConfigurePipes() routines to be more space efficient when compiled
- * - Added new *_ENUMERROR_PipeConfigurationFailed error codes for the *_Host_ConfigurePipes() routines
- * - The USARTStream global is now public and documented in the SerialStream module, allowing for the serial USART
- * stream to be accessed via its handle rather than via the implicit stdout and stdin streams
- * - The FAST_STREAM_TRANSFERS compile time option has been removed due to lack of use and low cost/benefit ratio
- * - Altered all endpoint/pipe stream transfers so that the new BytesProcessed parameter now points to a location
- * where the number of bytes in the transfer that have been completed can be stored (or NULL if entire transaction
- * should be performed in one chunk)
- * - The NO_STREAM_CALLBACKS compile time option has now been removed due to the new partial stream transfer feature
- * - Changed over all project and demo HID report descriptors to use the new HID report item macros
- * - Moved the HIDParser.c source file to the LUFA/Drivers/USB/Class/Common/ directory from the LUFA/Drivers/USB/Class/Host/
- * - Added support to the HID parser for extended USAGE items that contain the usage page as well as the usage index
- * - Removed the SerialStream driver, rolled functionality into the regular Serial peripheral driver via the new
- * Serial_CreateStream() and Serial_CreateBlockingStream() functions
- * - Renamed the low level Serial byte send/receive functions, to be consistent with the CDC class driver byte functions
- * - Altered the behaviour of the serial byte reception function so that is is non-blocking, and now returns a negative
- * value if no character is received (to remain consistent with the CDC class driver byte reception routines)
- * - Renamed the PRNT_Host_SendString(), CDC_Host_SendString() and CDC_Device_SendString() functions to *_SendData(), and
- * added new versions of the *_SendString() routines that expect a null terminated string instead
- * - Renamed all driver termination *_ShutDown() functions to the more logical name *_Disable()
- * - Reduced latency for executing the Start-Of-Frame events (if enabled in the user application)
- * - Removed Pipe_ClearErrorFlags(), pipe error flags are now automatically cleared when Pipe_ClearError() is called
- * - Endpoint_ResetFIFO() renamed to Endpoint_ResetEndpoint(), to be consistent with the Pipe_ResetPipe() function name
- * - Implemented on-demand PLL clock generation for the U4, U6 and U7 series USB AVRs when automatic PLL mode is specified
- * - F_CLOCK changed to F_USB to be more descriptive, and applicable on future architecture ports
- * - Renamed all low level Endpoint_Read_*, Endpoint_Write_* and Endpoint_Discard_* functions to use the number of bits instead of
- * a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures
- * - Renamed all low level Pipe_Read_*, Pipe_Write_* and Pipe_Discard_* functions to use the number of bits instead of
- * a symbolic size (Byte, Word, DWord) so that the function names are applicable and correct across all architectures
- * - Separated out board drivers by architecture in the library internals for better organisation
- * - Library Applications:
- * - Changed the XPLAINBridge software UART to use the regular timer CTC mode instead of the alternative CTC mode
- * via the Input Capture register, to reduce user confusion
- * - Combined page and word ISP programming mode code in the AVRISP-MKII clone project to reduce compiled size and
- * increase maintainability of the code
- * - Changed over library projects to use the new general ring buffer library driver module
- * - Added new high level TWI packet read/write commands, altered behaviour of the TWI_StartTransmission() function
- * - Changed TempDataLogger project's DS1307 driver to simplify the function interface and prevent a possible race condition
- * - Changed AVRISP-MKII project to use the Watchdog interrupt for command timeouts, to reduce CPU usage and free timer 0
- * for other uses
- * - Updated the software USART code in the XPLAIN Bridge application so that the incoming bits are sampled at their mid-point
- * instead of starting point, to give maximum reliability (thanks to Anton Staaf)
- *
- * <b>Fixed:</b>
- * - Core:
- * - Fixed broken USBFOO board drivers due to missing BOARD_USBFOO define
- * - Fixed HID host class driver incorrectly binding to HID devices that do not have an OUT endpoint
- * - Fixed incorrect definition of the HID_KEYBOARD_SC_D constant in the HID class driver (thanks to Opendous Inc.)
- * - Fixed incorrect definition of the HID_KEYBOARD_SC_RIGHT_ARROW constant in the HID class driver (thanks to Joby Taffey)
- * - Fixed incorrect endpoint initialisation order in the several device demos (thanks to Rick Drolet)
- * - Fixed inverted Minimus board LEDs
- * - Fixed incorrect byte ordering in the Audio_Device_WriteSample24 function (thanks to WZab)
- * - Fixed several functions in the Host mode Still Image Class driver returning an error code from the incorrect
- * error code enum (thanks to Daniel Seibert)
- * - Fixed ReportID not being removed from the feature/out report data array in the HID class driver when Report IDs are used
- * - Fixed incorrect BUTTONS_BUTTON1 definition for the Minimus board
- * - Fixed Still Image Host class driver exiting the descriptor search routine prematurely if the data pipes (but not event pipe)
- * is found
- * - Fixed missing call to Pipe_SetInfiniteINRequests() in the Pipe_ConfigurePipe() routine
- * - Fixed Remote Wakeup broken on the AVRs due to the mechanism only operating when the SUSPI bit is set (thanks to Holger Steinhaus)
- * - Fixed possible invalid program execution when in host mode if corrupt descriptor lengths are supplied by the attached device
- * - Library Applications:
- * - Fixed Benito project discarding incoming data from the USB virtual serial port when the USART is busy
- * - Fixed broken DFU bootloader, added XPLAIN support for bootloader start when XCK jumpered to ground
- * - Fixed broken HID_REQ_GetReport request handler in the Low Level GenericHID demo
- * - Fixed possible lost data in the XPLAINBridge, USBtoSerial and Benito projects when the host exceeds the packet
- * timeout period on received packets as set by USB_STREAM_TIMEOUT_MS (thanks to Justin Rajewski)
- * - Fixed possible programming problem in the AVRISP-MKII clone project when programming specific patterns into a target
- * memory space that is only byte (not page) addressable
- * - Fixed errors in the incomplete Test and Measurement device demo preventing proper operation (thanks to Pavel Plotnikov)
- * - Fixed programming errors in the AVRISP-MKII project when the programming packet is a round multiple of the endpoint bank
- * size under avrdude (thanks to Steffan Woltjer)
- *
- *
- * \section Sec_ChangeLog101122 Version 101122
- * <b>New:</b>
- * - Core:
- * - Added new SCSI_ASENSE_NOT_READY_TO_READY_CHANGE constant to the Mass Storage class driver, to indicate when a previously
- * not ready removable medium has now become ready for the host's use (thanks to Martin Degelsegger)
- * - Moved the Pipe and Endpoint stream related code to two new USB library core source files EndpointStream.c and PipeStream.c
- * - Added new USB_Device_GetFrameNumber() and USB_Host_GetFrameNumber() functions to retrieve the current USB frame number
- * - Added new USB_Host_EnableSOFEvents(), USB_Host_DisableSOFEvents() and EVENT_USB_Host_StartOfFrame() for the user application
- * handling of USB Start of Frame events while in USB Host mode
- * - Added new PRNT_Host_BytesReceived(), PRNT_Host_ReceiveByte(), PRNT_Host_SendByte() and PRNT_Host_Flush() functions to the
- * Print Host Class driver
- * - Added class specific descriptor alternative struct type defines with standard USB-IF element naming
- * - Added new project makefile template to the library and moved board driver stub files into in a new "CodeTemplates" directory
- * - Added board hardware driver support for the Adafruit U4 breakout board
- * - Added board hardware driver support for the Arduino Uno development board
- * - Added board hardware driver support for the Blackcat USB JTAG board (thanks to the PSGroove team)
- * - Added board hardware driver support for the Busware BUI development board
- * - Added board hardware driver support for the Busware CUL V3 868MHZ radio board (thanks to Dirk Tostmann)
- * - Added board hardware driver support for the Kernel Concepts USBFOO development board
- * - Added board hardware driver support for the Linnix UDIP development board
- * - Added board hardware driver support for the Olimex AVR-USB-162 development board (thanks to Steve Fawcett)
- * - Added board hardware driver support for the Maximus board (thanks to the PSGroove team)
- * - Added board hardware driver support for the Microsin AVR-USB162 breakout board
- * - Added board hardware driver support for the Minimus board (thanks to the PSGroove team)
- * - Added new NO_CLASS_DRIVER_AUTOFLUSH compile time option to disable automatic flushing of interfaces when the USB management
- * tasks for each driver is called
- * - Added standard keyboard HID report scan-code defines (thanks to Laszlo Monda)
- * - Added new Pipe_GetBusyBanks(), Endpoint_GetBusyBanks() and Endpoint_AbortPendingIN() functions
- * - Library Applications:
- * - Added default test tone generation mode to the Device mode AudioInput demos
- * - Added new NO_BLOCK_SUPPORT, NO_EEPROM_BYTE_SUPPORT, NO_FLASH_BYTE_SUPPORT and NO_LOCK_BYTE_WRITE_SUPPORT compile time options to the
- * CDC class bootloader
- * - Added new XCK_RESCUE_CLOCK_ENABLE compile time option to the AVRISP-MKII clone programmer project (thanks to Tom Light)
- *
- * <b>Changed:</b>
- * - Core:
- * - Removed complicated logic for the Endpoint_ConfigureEndpoint() function to use inlined or function called versions
- * depending of if the given bank size is a compile time constant, as the compiler does a better job of optimizing
- * with basic code
- * - Changed the signature of the CALLBACK_USB_GetDescriptor() callback function so that the descriptor pointer is const, to remove
- * the need for extra casting inside the callback (thanks to Jonathan Kollasch)
- * - Reduced HOST_DEVICE_SETTLE_DELAY_MS to 1000ms down from 1500ms to improve device compatibility while in USB Host mode
- * - Removed the EVENT_USB_InitFailure() event, not specifying a USB mode correctly now defaults to UID selection mode
- * - Renamed and moved class driver common constant definitions to make the naming scheme more uniform
- * - Moved the USB mode specifier constants into a new enum, so that they are semantically related to one another
- * - Renamed ENDPOINT_DOUBLEBANK_SUPPORTED() to ENDPOINT_BANKS_SUPPORTED() and changed it to return the maximum number of supported banks for
- * the given endpoint
- * - Better algorithm to extract and convert the internal device serial number into a string descriptor (if present)
- * - All USB class drivers are now automatically included when LUFA/Drivers/USB.h is included, and no longer need to be separately included
- * - The MIDI class drivers now automatically flushes the MIDI interface when the MIDI class driver's USBTask() function is called
- * - Renamed the EVENT_USB_Device_UnhandledControlRequest() event to EVENT_USB_Device_ControlRequest() as it is now fired before the library
- * request handlers, not afterwards
- * - Library Applications:
- * - Changed over all device demos to use a clearer algorithm for the configuring of the application's endpoints
- * - Added missing DataflashManager_CheckDataflashOperation() function to the MassStorageKeyboard demo, removed redundant
- * SCSI_Codes.h file as these values are part of the MassStorage Class Driver
- * - Added compile time error to the AVRISP-MKII project when built for the U4 chips, as the default VTARGET detection ADC channel
- * does not exist on these chips (thanks to Marco)
- * - Changed all Device mode LowLevel demos and Device Class drivers so that the control request is acknowledged and any data
- * transferred as quickly as possible without any processing in between sections, so that long callbacks or event handlers will
- * not break communications with the host by exceeding the maximum control request stage timeout period
- * - Changed over all demos, drivers and internal functions to use the current frame number over the Start of Frame flag where possible
- * to free up the Start of Frame flag for interrupt use in the user application
- * - All project makefiles now correctly clean intermediate build files from assembly and C++ sources (thanks to Daniel Czigany)
- * - Changed default value for the reset polarity parameter in the AVRISP-MKII project so that it defaults to active low drive
- * - Changed configuration descriptor parser for all host mode projects and class drivers to ensure better compatibility with devices
- * - All LowLevel demos changed to use the constants and types defined in the USB class drivers
- * - Changed AudioInput and AudioOutput demos to reload the next sample via an interrupt rather than polling the sample timer
- * - Rescue clock of the AVRISP-MKII moved to the AVR's OCR1A pin, so that the clock can be generated at all times
- * - Changed ClassDriver MIDI demos to process all incoming events in a loop until the bank becomes empty rather than one at a time
- * - Changed LowLevel MIDI demos to only clear the incoming event bank once it has become empty to support packed event packets
- *
- * <b>Fixed:</b>
- * - Core:
- * - Fixed USB_GetHIDReportItemInfo() function modifying the given report item's data when the report item does not exist
- * within the supplied report of a multiple report HID device
- * - Fixed critical pipe/endpoint memory allocation issue where the bank memory address space could be silently overlapped
- * in the USB controller if the endpoints or pipes were allocated in anything other than ascending order (thanks to Martin Degelsegger)
- * - Added LEDs_ToggleLEDs() function to several board LED drivers which were missing it (thanks to Andrei Krainev)
- * - Fixed SET FEATURE and CLEAR FEATURE control requests directed at an unconfigured endpoint causing request timeouts
- * - Fixed USB_Host_ClearPipeStall() incorrectly determining the endpoint direction from the currently selected pipe
- * - Fixed JTAG_DEBUG_POINT() and JTAG_DEBUG_BREAK() macros not compiling under pure C99 standards mode
- * - Fixed endpoint selection within the CALLBACK_HID_Device_CreateHIDReport() callback function causing broken GET REPORT requests
- * - Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target
- * - Fixed incorrect LEDs_ChangeLEDs() function in the Benito board LED driver
- * - Fixed incorrect USB_DeviceState value when unconfiguring the device without an address set
- * - Fixed SPI driver not explicitly setting /SS and MISO pins as inputs when SPI_Init() is called
- * - Fixed random enumeration failure while in device mode due to interrupts causing the Set Address request to exceed maximum timings
- * - Fixed MIDI_Host_Flush() not aborting early when the specified MIDI host interface was not configured
- * - Fixed MIDI class driver send routines silently discarding packets if the endpoint or pipe is busy (thanks to Robin Green)
- * - Library Applications:
- * - Fixed MassStorage based demos and projects resetting the SCSI sense values before the command is executed, leading to
- * missed SCSI sense values when the host retrieves the sense key (thanks to Martin Degelsegger)
- * - Fixed USBtoSerial and Benito project SetLineEncoding calls failing if the USART is busy, due to the RX ISR delaying the control
- * request handler
- * - Fixed LowLevel PrinterHost demo not sending control requests to the attached printer with the correct printer interface wIndex value
- * - Fixed incorrect signature reported in the CDC class bootloader for the ATMEGA32U2
- * - Fixed BootloaderCDC project failing on some operating systems due to removed Line Encoding options (thanks to Alexey Belyaev)
- * - Fixed broken FLASH/EEPROM programming in the AVRISP-MKII clone project when writing in non-paged mode and the polling byte cannot be used
- * - Fixed ISR definition conflict in the XPLAIN bridge between the software UART and the AVRISP-MKII ISP modules
- * - Fixed USBtoSerial and XPLAINBridge demos discarding data from the PC if the send buffer becomes full
- * - Fixed broken input in the MagStripe reader project due to an incorrect HID report descriptor
- * - Fixed incorrect PollingIntervalMS values in the demo/project/bootloader endpoint descriptors (thanks to MCS Electronics)
- * - Fixed AVRISP-MKII clone project not starting the target's program automatically after exiting TPI programming mode
- *
- *
- * \section Sec_ChangeLog100807 Version 100807
- * <b>New:</b>
- * - Added new ADC_DisableChannel() function (thanks to Mich Davis)
- * - Added new VTARGET_REF_VOLTS and VTARGET_SCALE_FACTOR compile time defines to the AVRISP-MKII programmer project to set
- * the VTARGET reference voltage and scale factor
- * - Added new pgm_read_ptr() macro to Common.h for reading of pointers out of flash memory space
- * - Added new SWAPENDIAN_16() and SWAPENDIAN_32() macros to Common.h for statically initialized variables at compile time
- * - Added new Drivers/USB/LowLevel/Device.c file to house Device mode specific functions that are more complicated than simple macros
- * - Added new AVRStudio 4 project files for all library demos, projects and bootloaders
- * - Added ability to set the serial baud rate via the user's terminal in the XPLAINBridge project
- * - Added new LUFA module variables for the different source modules in the core library makefile to simplify project makefiles
- * - Added start of a new Test and Measurement class demo (thanks to Peter Lawrence)
- * - Added new SPI_ORDER_* data order masks to the SPI peripheral driver
- * - Added support to the AVRISP-MKII project for ISP speeds slower than 125KHz via a new software SPI driver
- * - Added support for the new button/LED on the latest model USBTINY-MKII
- *
- * <b>Changed:</b>
- * - The RingBuff library code has been replaced in the XPLAINBridge, Benito and USBtoSerial projects with an ultra lightweight
- * ring buffer to help improve the reliability of the projects
- * - The EEPROM stream read/write functions now use eeprom_update_byte() instead of eeprom_write_byte(), so that only
- * changed bytes are written to EEPROM to preserve its lifespan
- * - Changed over the AVRISP-MKII and TemperatureDataLogger projects to use eeprom_update_byte() when writing non-volatile
- * parameters to EEPROM to preserve its lifespan
- * - Removed unused line encoding data and control requests from the CDC Bootloader code, to save space
- * - Renamed SERIAL_STREAM_ASSERT() macro to STDOUT_ASSERT()
- * - The USB_Device_IsRemoteWakeupSent() and USB_Device_IsUSBSuspended() macros have been deleted, as they are now obsolete
- * - Rewrote the implementation of the SwapEndian_16() and SwapEndian_32() functions so that they compile down in most instances to
- * minimal loads and stores rather than complicated shifts
- * - The software UART in the XPLAINBridge has been largely altered to try to improve upon its performance and reliability
- * - The USBtoSerial and Benito projects now flushes received data via a flush timer, so that several bytes can be transmitted at once
- * - Removed the automated checking of event names in the demo, project and bootloader makefiles due to inconsistencies between the
- * behaviour of the command line tools used to perform the check on each platform
- * - Internal USB driver source files renamed and moved to ease future possible architecture ports
- * - All internal pseudo-function macros have been converted to true inline functions for type-safety and readability
- * - Changed LED indicator masks for the AVRISP-MKII project, so that there are defined roles for each LED
- * - Altered the CDC Device and Host Class drivers' receive byte routines, so that no data is indicated by the function returning a
- * negative value (thanks to Andreas Paulin)
- * - Added auto flushing of OUT data to the CDC Host Class driver's USBTask function to automatically flush the send pipe buffer
- *
- * <b>Fixed:</b>
- * - Fixed AVRISP project sending a LOAD EXTENDED ADDRESS command to 128KB AVRs after programming or reading from
- * the last page of FLASH (thanks to Gerard Sexton)
- * - Fixed AVRISP project not sending a full erase-and-write EEPROM command to XMEGA targets when writing to the EEPROM
- * instead of the split write-only command (thanks to Tim Margush)
- * - Fixed RNDISEthernet demos crashing when calculating checksums for Ethernet/TCP packets of more than ~500 bytes due to
- * an overflow in the checksum calculation loop (thanks to Kevin Malec)
- * - Fixed XPLAINBridge project not correctly reading the XMEGA's supply voltage when reporting back to the host
- * - Fixed incorrect signature for the ATMEGA32U2 in the DFU bootloader (thanks to Axel Rohde)
- * - Fixed internal device serial not being accessible on the ATMEGAXXU2 AVRs (thanks to Axel Rohde)
- * - Fixed void pointer arithmetic in ConfigDescriptor.h breaking C++ compatibility (thanks to Michael Hennebry)
- * - Fixed broken PDI EEPROM Section Erase functionality in the AVRISP-MKII project
- * - Fixed USB_Device_SendRemoteWakeup() not working when the USB clock was frozen during USB bus suspend (thanks to Brian Dickman)
- * - Fixed occasional lockup of the AVRISP project due to the timeout extension code incorrectly extending the timeout in
- * PDI and TPI programming modes infinitely
- * - Fixed HID device class driver still using PrevReportINBuffer for GetReport control requests even when it has been
- * set to NULL by the user application (thanks to Axel Rohde)
- * - Fixed MIDI_Device_SendEventPacket() not correctly waiting for the endpoint to become ready (thanks to Robin Green)
- * - Fixed Benito and USBtoSerial projects not turning off the USART before reconfiguring it, which could cause incorrect
- * operation to occur (thanks to Bob Paddock)
- * - Fixed Serial peripheral driver not turning off the USART before reconfiguring it, which would cause incorrect operation
- * to occur (thanks to Bob Paddock)
- * - Fixed software application start command broken in the DFU class bootloader when dfu-programmer is used due to application
- * start address corruption
- *
- *
- * \section Sec_ChangeLog100513 Version 100513
- * <b>New:</b>
- * - Added incomplete MIDIToneGenerator project
- * - Added new Relay Controller Board project (thanks to OBinou)
- * - Added board hardware driver support for the Teensy, USBTINY MKII, Benito and JM-DB-U2 lines of third party USB AVR boards
- * - Added new ATTR_NO_INIT variable attribute for global variables that should not be automatically cleared on startup
- * - Added new ENDPOINT_*_BusSuspended error code to the Endpoint function, so that the stream functions early-abort if the bus
- * is suspended before or during a transfer
- * - Added new EVENT_CDC_Device_BreakSent() event and CDC_Host_SendBreak() function to the Device and Host CDC Class drivers
- * - Added ReportType parameter to the HID device class driver CALLBACK_HID_Device_ProcessHIDReport() function so that FEATURE
- * reports from the host to the device can be correctly processed
- * - Added ReportType parameter to the HID host class driver HID_Host_SendReportByID() function so that FEATURE reports can be
- * issued to the attached device
- *
- * <b>Changed:</b>
- * - AVRISP programmer project now has a more robust timeout system
- * - Added a timeout value to the TWI_StartTransmission() function, within which the addressed device must respond
- * - Webserver project now uses the board LEDs to indicate the current IP configuration state
- * - Added ENABLE_TELNET_SERVER compile time option to the Webserver project to disable the TELNET server if desired
- * - Increased throughput of the USBtoSerial demo on systems that send multiple bytes per packet (thanks to Opendous Inc.)
- * - Double bank CDC endpoints in the XPLAIN Bridge project, re-enable JTAG once the mode selection pin has been sampled.
- * - Standardized the naming scheme given to configuration descriptor sub-elements in the Device mode demos, bootloaders
- * and projects
- * - All Class Driver Host mode demos now correctly set the board LEDs to READY once the enumeration process has completed
- * - Added LIBUSB_FILTERDRV_COMPAT compile time option to the AVRISP programmer project to make the code compatible with Windows
- * builds of avrdude at the expense of AVRStudio compatibility
- * - Removed two-step endpoint/pipe bank clear and switch sequence for smaller, faster endpoint/pipe code
- * - The USB_Init() function no longer calls sei() - the user is now responsible for enabling interrupts when they are ready
- * for them to be enabled (thanks to Andrei Krainev)
- * - The Audio_Device_IsSampleReceived() and Audio_Device_IsReadyForNextSample() functions are now inline, to reduce overhead
- * - Removed the cast to uint16_t on the set baud rate in the USBtoSerial project, so that the higher >1M baud rates can be
- * selected (thanks to Steffan Woltjer)
- * - Removed software PDI and TPI emulation from the AVRISP-MKII clone project as it was very buggy and slow - PDI and TPI must
- * now be implemented via separate programming headers
- * - The CDC class bootloader now uses a watchdog reset rather than a soft-reset when exited to ensure that all hardware is
- * properly reset to their defaults
- * - Device mode class driver callbacks are now fired before the control request status stage is sent to prevent the host from
- * timing out if another request is immediately fired and the device has a lengthy callback routine
- * - The TeensyHID bootloader has been removed, per request from Paul at PJRC
- * - The LIBUSB_FILTERDRV_COMPAT compile time option in the XPLAINBridge and AVRISP-MKII projects has been renamed
- * LIBUSB_DRIVER_COMPAT, as it applies to all software on all platforms using the libUSB driver
- *
- * <b>Fixed:</b>
- * - Fixed possible device lockup when INTERRUPT_CONTROL_ENDPOINT is enabled and the control endpoint is not properly
- * selected when the ISR completes
- * - Fixed AVRISP-MKII clone project not correctly issuing LOAD EXTENDED ADDRESS commands when the extended address
- * boundary is crossed during programming or read back (thanks to Gerard Sexton)
- * - Fixed warnings when building the AVRISP-MKII clone project with the ENABLE_XPROG_PROTOCOL compile time option disabled
- * - Fixed software PDI/TPI programming mode in the AVRISP project not correctly toggling just the clock pin
- * - Fixed TWI_StartTransmission() corrupting the contents of the GPIOR0 register
- * - Fixed TWI driver not aborting when faced with no response after attempting to address a device on the bus
- * - Fixed ADC routines not correctly returning the last result when multiple channels were read
- * - Fixed ADC routines failing to read the extended channels (Channels 8 to 13, Internal Temperature Sensor) on the
- * U4 series USB AVR parts
- * - Fixed LowLevel MassStorage demo broken on the U2 series USB AVRs due to unsupported double-banked endpoint modes used
- * - Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL is defined (thanks to C. Scott Ananian)
- * - Fixed incorrect definition of HID_ALIGN_DATA() causing incorrect HID report item data alignment
- * - Fixed Still Image Host class driver not resetting the transaction ID when a new session is opened, fixed driver not sending
- * a valid session ID to the device
- * - Removed invalid dfu and flip related targets from the bootloaders - bootloaders can only be replaced with an external programmer
- * - Fixed Set/Clear Feature requests directed to a non-configured endpoint not returning a stall to the host
- * - Fixed HID Device Class Driver not allocating a temporary buffer when the host requests a report via the control endpoint and the
- * user has set the PrevReportINBuffer driver configuration element to NULL (thanks to Lars Noschinski)
- * - Fixed device state not being reset to DEVICE_STATE_Default if the host sets a 0x00 device address
- * - Fixed device not stalling configuration requests before the device's address has been set
- * - Fixed possibility of internal signature retrieval being corrupted if an interrupt occurs during a signature byte
- * read (thanks to Andrei Krainev)
- * - Fixed device state not being reset back to the default state if the host sets the address to 0
- * - Fixed Set Configuration requests not being stalled until the host has set the device's address
- * - Fixed Host mode HID class driver not sending the correct report type when HID_Host_SendReportByID() was called and the
- * HID_HOST_BOOT_PROTOCOL_ONLY compile time option is set
- * - Fixed INTERRUPT_CONTROL_ENDPOINT compile time option preventing other interrupts from occurring while the control endpoint
- * request is being processed, causing possible lockups if a USB interrupt occurs during a transfer
- * - Remove incorrect Abstract Call Management class specific descriptor from the CDC demos, bootloaders and projects
- *
- *
- * \section Sec_ChangeLog100219 Version 100219
- *
- * <b>New:</b>
- * - Added TPI programming support for 6-pin ATTINY devices to the AVRISP programmer project (thanks to Tom Light)
- * - Added command timeout counter to the AVRISP project so that the device no longer freezes when incorrectly connected
- * to a target
- * - Added new TemperatureDataLogger application, a USB data logger which writes to the device's dataflash and appears to
- * the host as a standard Mass Storage device when inserted
- * - Added MIDI event packing support to the MIDI Device and Host mode Class drivers, allowing for multiple MIDI events to
- * sent or received in packed form in a single USB packet
- * - Added new MIDI send buffer flush routines to the MIDI Device and Host mode Class drivers, to flush packed events
- * - Added master mode hardware TWI driver for easy TWI peripheral control
- * - Added ADC MUX masks for the standard ADC input channels on all AVR models with an ADC, altered demos to use these masks
- * as on some models, the channel number is not identical to its single-ended ADC MUX mask
- * - New Webserver project, a RNDIS host USB webserver using the open source uIP TCP/IP network stack and FatFS library
- * - New BOARD value option BOARD_NONE (equivalent to not specifying BOARD) which will remove all board hardware drivers which
- * do not adversely affect the code operation (currently only the LEDs driver)
- * - Added keyboard modifier masks (HID_KEYBOARD_MODIFER_*) and LED report masks (KEYBOARD_LED_*) to the HID class driver and
- * Keyboard demos
- * - Added .5MHz recovery clock to the AVRISP programmer project when in ISP programming mode to correct mis-set fuses
- *
- * <b>Changed:</b>
- * - Slowed down software USART carried PDI programming in the AVRISP project to prevent transmission errors
- * - Renamed the AVRISP project folder to AVRISP-MKII to reduce confusion
- * - Renamed the RESET_LINE_* makefile tokens in the AVRISP MKII Project to AUX_LINE_*, as they are not always used for target
- * reset
- * - Changed over the MassStorageKeyboard Class driver device demo to use Start of Frame events rather than a timer to keep track
- * of elapsed milliseconds
- * - Inlined currently unused (but standardized) maintenance functions in the Device and Host Class drivers to save space
- * - The XPLAINBridge project now selects between a USB to Serial bridge and a PDI programmer on startup, reading the JTAG port's
- * TDI pin to determine which mode to use
- * - Removed the stream example code from the Low Level VirtualSerial demos, as they were buggy and only served to add clutter
- *
- * <b>Fixed:</b>
- * - Fixed AVRISP project not able to enter programming mode when ISP protocol is used
- * - Fixed AVRISP PDI race condition where the guard time between direction changes could be interpreted as a start bit
- * - Fixed ADC_IsReadingComplete() returning an inverted result
- * - Fixed blocking CDC streams not aborting when the host is disconnected
- * - Fixed XPLAIN board Dataflash driver broken due to incorrect preprocessor commands
- * - Fixed inverted XPLAIN LED driver output (LED turned on when it was supposed to be turned off, and vice-versa)
- * - Fixed Class Driver struct interface numbers in the KeyboardMouse and VirtualSerialMouse demos (thanks to Renaud Cerrato)
- * - Fixed invalid USB controller PLL prescaler values for the ATMEGAxxU2 controllers
- * - Fixed lack of support for the ATMEGA32U2 in the DFU and CDC class bootloaders
- * - Fixed Benito project not resetting the target AVR automatically when programming has completed
- * - Fixed DFU bootloader programming not discarding the correct number of filler bytes from the host when non-aligned programming
- * ranges are specified (thanks to Thomas Bleeker)
- * - Fixed CDC and RNDIS host demos and class drivers - bidirectional endpoints should use two separate pipes, not one half-duplex pipe
- * - Fixed Pipe_IsEndpointBound() not taking the endpoint's direction into account
- * - Fixed EEPROM and FLASH ISP programming in the AVRISP project
- * - Fixed incorrect values of USB_CONFIG_ATTR_SELFPOWERED and USB_CONFIG_ATTR_REMOTEWAKEUP tokens (thanks to Claus Christensen)
- * - Fixed SerialStream driver blocking while waiting for characters to be received instead of returning EOF
- * - Fixed SerialStream driver not setting stdin to the created serial stream (thanks to Mike Alexander)
- * - Fixed USB_GetHIDReportSize() returning the number of bits in the specified report instead of bytes
- * - Fixed AVRISP project not extending the command delay after each successful page/word/byte program
- * - Fixed accuracy of the SERIAL_UBBRVAL() and SERIAL_2X_UBBRVAL() macros for higher baud rates (thanks to Renaud Cerrato)
- *
- *
- * \section Sec_ChangeLog091223 Version 091223
- *
- * <b>New:</b>
- * - Added activity LED indicators to the AVRISP project to indicate when the device is busy processing a command
- * - The USB target family and allowable USB mode tokens are now public and documented (USB_CAN_BE_*, USB_SERIES_*_AVR)
- * - Added new XPLAIN USB to Serial Bridge project (thanks to John Steggall for initial proof-of-concept, David Prentice
- * and Peter Danneger for revised software USART code)
- * - Added new RNDIS Ethernet Host LowLevel demo
- * - Added new RNDIS Ethernet Host Class Driver
- * - Added new RNDIS Ethernet Host ClassDriver demo
- * - Added CDC_Host_Flush() function to the CDC Host Class driver to flush sent data to the attached device
- * - Added PDI programming support for XMEGA devices to the AVRISP programmer project (thanks to Justin Mattair)
- * - Added support for the XPLAIN board Dataflash, with new XPLAIN_REV1 board target for the different dataflash used
- * on the first revision boards compared to the one mounted on later revisions
- * - Added new HID_ALIGN_DATA() macro to return the pre-retrieved value of a HID report item, left-aligned to a given datatype
- * - Added new PreviousValue to the HID Report Parser report item structure, for easy monitoring of previous report item values
- * - Added new EVK527 board target
- * - Added new USB_Host_GetDeviceStringDescriptor() convenience function
- * - Added new LEDNotification project to the library, to give a visual LED notification on new events from the host
- * - Added new NO_DEVICE_REMOTE_WAKEUP and NO_DEVICE_SELF_POWER compile time options
- *
- * <b>Changed:</b>
- * - Removed code in the Keyboard demos to send zeroed reports between two reports with differing numbers of key codes
- * as this relied on non-standard OS driver behaviour to repeat key groups
- * - The SCSI_Request_Sense_Response_t and SCSI_Inquiry_Response_t type defines are now part of the Mass Storage Class
- * driver common defines, rather than being defined in the Host mode Class driver section only
- * - The USB_MODE_HOST token is now defined even when host mode is not available
- * - The CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new ReportType parameter to
- * indicate the report type to generate
- * - All Class Drivers now return false or the "DeviceDisconnected" error code of their respective error enums when a function
- * is called when no host/device is connected where possible
- * - The HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to HOST_SENDCONTROL_DeviceDisconnected to be in line
- * with the rest of the library error codes
- * - Make MIDI device demos also turn off the on board LEDs if MIDI Note On messages are sent with a velocity of zero,
- * which some devices use instead of Note Off messages (thanks to Robin Green)
- * - The CDC demos are now named "VirtualSerial" instead to indicate the demos' function rather than its implemented USB class,
- * to reduce confusion and to be in line with the rest of the LUFA demos
- * - The SImage_Host_SendBlockHeader() and SImage_Host_ReceiveBlockHeader() Still Image Host Class driver functions are now public
- *
- * <b>Fixed:</b>
- * - Added missing CDC_Host_CreateBlockingStream() function code to the CDC Host Class driver
- * - Fixed incorrect values for REPORT_ITEM_TYPE_* enum values causing corrupt data in the HID Host Parser
- * - Fixed misnamed SI_Host_USBTask() and SI_Host_ConfigurePipes() functions
- * - Fixed broken USB_GetNextDescriptor() function causing the descriptor to jump ahead double the expected amount
- * - Fixed Pipe_IsEndpointBound() not masking the given Endpoint Address against PIPE_EPNUM_MASK
- * - Fixed host state machine not enabling Auto VBUS mode when HOST_DEVICE_SETTLE_DELAY_MS is set to zero
- * - Fixed misnamed Pipe_SetPipeToken() macro for setting a pipe's direction
- * - Fixed CDCHost failing on devices with bidirectional endpoints
- * - Fixed USB driver failing to define the PLL prescaler mask for the ATMEGA8U2 and ATMEGA16U2
- * - Fixed HID Parser not distributing the Usage Min and Usage Max values across an array of report items
- * - Fixed Mass Storage Host Class driver and Low Level demo not clearing the error condition if an attached device returns a
- * STALL to a GET MAX LUN request (thanks to Martin Luxen)
- * - Fixed TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting
- * - Fixed MassStorageHost Class driver demo not having USB_STREAM_TIMEOUT_MS compile time option set properly to prevent slow
- * devices from timing out the data pipes
- * - Fixed the definition of the Endpoint_BytesInEndpoint() macro for the U4 series AVR parts
- * - Fixed MIDI host Class driver MIDI_Host_SendEventPacket() routine not properly checking for Pipe ready before writing
- * - Fixed use of deprecated struct initializers, removed library unused parameter warnings when compiled with -Wextra enabled
- * - Fixed Still Image Host Class driver truncating the PIMA response code (thanks to Daniel Seibert)
- * - Fixed USB_CurrentMode not being reset to USB_MODE_NONE when the USB interface is shut down and both Host and Device modes can be
- * used (thanks to Daniel Levy)
- * - Fixed TeensyHID bootloader not enumerating to the host correctly (thanks to Clint Fisher)
- * - Fixed AVRISP project timeouts not checking for the correct timeout period (thanks to Carl Ott)
- * - Fixed STK525 Dataflash driver using incorrect bit-shifting for Dataflash addresses (thanks to Tim Mitchell)
- *
- *
- * \section Sec_ChangeLog091122 Version 091122
- *
- * <b>New:</b>
- * - Added new Dual Role Keyboard/Mouse demo
- * - Added new HID_HOST_BOOT_PROTOCOL_ONLY compile time token to reduce the size of the HID Host Class driver when
- * Report protocol is not needed
- * - Added new MIDI LowLevel and ClassDriver Host demo, add new MIDI Host Class driver
- * - Added new CDC/Mouse ClassDriver device demo
- * - Added new Joystick Host ClassDriver and LowLevel demos
- * - Added new Printer Host mode Class driver
- * - Added new Printer Host mode ClassDriver demo
- * - Added optional support for double banked endpoints and pipes in the Device and Host mode Class drivers
- * - Added new stream creation function to the CDC Class drivers, to easily make standard I/O streams from CDC Class driver instances
- *
- * <b>Changed:</b>
- * - Removed mostly useless "TestApp" demo, as it was mainly useful only for checking for syntax errors in the library
- * - MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs
- * - Cleanups to the Device mode Mass Storage demo application SCSI routines
- * - Changed Audio Class driver sample read/write functions to be inline, to reduce the number of cycles needed to transfer
- * samples to and from the device (allowing more time for sample processing and output)
- * - Audio class Device mode demos now work at both 16MHz and 8MHz, rather than just at 8MHz
- * - The previous USBtoSerial demo has been moved into the projects directory, as it was just a modified CDC demo
- * - The Endpoint/Pipe functions now use the const qualifier on the input buffer
- * - Changed the CALLBACK_HIDParser_FilterHIDReportItem() callback to pass a HID_ReportItem_t rather than just the current
- * item's attributes, to expose more information on the item (including it's type, collection path, etc.)
- * - Changed MouseHostWithParser demos to check that the report items have a Mouse usage collection as a parent at some point,
- * to prevent Joysticks from enumerating with the demo
- * - Corrected the name of the misnamed USB_GetDeviceConfigDescriptor() function to USB_Host_GetDeviceConfigDescriptor().
- * - Keyboard LowLevel/ClassDriver demos now support multiple simultaneous key presses (up to 6) per report
- *
- * <b>Fixed:</b>
- * - Fixed PrinterHost demo returning invalid Device ID data when the attached device does not have a
- * device ID (thanks to Andrei Krainev)
- * - Changed LUFA_VERSION_INTEGER define to use BCD values, to make comparisons easier
- * - Fixed issue in the HID Host class driver's HID_Host_SendReportByID() routine using the incorrect mode (control/pipe)
- * to send report to the attached device
- * - Fixed ClassDriver AudioOutput device demo not selecting an audio output mode
- * - Fixed incorrect SampleFrequencyType value in the AudioInput and AudioOutput ClassDriver demos' descriptors
- * - Fixed incorrect event name rule in demo/project/bootloader makefiles
- * - Fixed HID device class driver not reselecting the correct endpoint once the user callback routines have been called
- * - Corrected HID descriptor in the Joystick Device demos - buttons should be placed outside the pointer collection
- * - Fixed HID report parser collection paths invalid due to misplaced semicolon in the free path item search loop
- * - Fixed HID host Class driver report send/receive report broken when issued through the control pipe
- * - Fixed HOST_STATE_AS_GPIOR compile time option being ignored when in host mode (thanks to David Lyons)
- * - Fixed LowLevel Keyboard demo not saving the issues report only after it has been sent to the host
- * - Fixed Endpoint_Write_Control_Stream_* functions not sending a terminating IN when given data Length is zero
- *
- *
- * \section Sec_ChangeLog090924 Version 090924
- *
- * <b>New:</b>
- * - Added new host mode class drivers and matching demos to the library for rapid application development
- * - Added flag to the HID report parser to indicate if a device has multiple reports
- * - Added new EVENT_USB_Device_StartOfFrame() event, controlled by the new USB_Device_EnableSOFEvents() and
- * USB_Device_DisableSOFEvents() macros to give bus-synchronized millisecond interrupts when in USB device mode
- * - Added new Endpoint_SetEndpointDirection() macro for bidirectional endpoints
- * - Added new AVRISP project, a LUFA powered clone of the Atmel AVRISP-MKII programmer
- * - Added ShutDown() functions for all hardware peripheral drivers, so that peripherals can be turned off after use
- * - Added new CDC_Device_Flush() command to the device mode CDC Class driver to flush Device->Host data
- * - Added extra masks to the SPI driver, changed SPI_Init() so that the clock polarity and sample modes can be set
- * - Added new callback to the HID report parser, so that the user application can filter only the items it is interested
- * in to be stored into the HIDReportInfo structure to save RAM
- * - Added support for the officially recommended external peripheral layout for the BUMBLEB board (thanks to Dave Fletcher)
- * - Added new Pipe_IsFrozen() macro to determine if the currently selected pipe is frozen
- * - Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID
- * - Added new combined Mass Storage and Keyboard demo (thanks to Matthias Hullin)
- *
- * <b>Changed:</b>
- * - SetIdle requests to the HID device driver with a 0 idle period (send changes only) now only affect the requested
- * HID interface within the device, not all HID interfaces
- * - Added explicit attribute masks to the device mode demos' descriptors
- * - Added return values to the CDC and MIDI class driver transmit functions
- * - Optimized Endpoint_Read_Word_* and Pipe_Read_Word_* macros to reduce compiled size
- * - Added non-null function parameter pointer restrictions to USB Class drivers to improve user code reliability
- * - Added new "Common" section to the class drivers, to hold all mode-independent definitions for clarity
- * - Moved SCSI command/sense constants into the Mass Storage Class driver, instead of the user-code
- * - Altered the SCSI commands in the LowLevel Mass Storage Host to save on FLASH space by reducing function calls
- * - Changed the parameters and behaviour of the USB_GetDeviceConfigDescriptor() function so that it now performs size checks
- * and data validations internally, to simplify user code
- * - Changed HIDParser to only zero out important values in the Parsed HID Report Item Information structure to save cycles
- * - The HID report parser now always processed FEATURE items - HID_ENABLE_FEATURE_PROCESSING token now has no effect
- * - The HID report parser now always ignores constant-data items, HID_INCLUDE_CONSTANT_DATA_ITEMS token now has no effect
- * - The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool
- * - Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names
- * are used in a project
- * - The HID Report Parser now gives information on the total length of each report within a HID interface
- * - The USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate USB_Descriptor_* and
- * USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so both may be used
- *
- * <b>Fixed:</b>
- * - Fixed possible lockup in the CDC device class driver, when the host sends data that is a multiple of the
- * endpoint's bank
- * - Fixed swapped parameters in the HID state memory copy call while processing a HID PUSH item in the HID report parser
- * - Fixed memory corruption HID report parser when too many COLLECTION or PUSH items were processed
- * - Fixed HID report parser not resetting the FEATURE item count when a REPORT ID item is encountered
- * - Fixed USBtoSerial demos not reading in UDR1 when the USART receives data but the USB interface is not enumerated,
- * causing continuous USART receive interrupts
- * - Fixed misspelled event name in the Class driver USBtoSerial demo, preventing correct operation
- * - Fixed invalid data being returned when a GetStatus request is issued in Device mode with an unhandled data recipient
- * - Added hardware USART receive interrupt and software buffering to the Benito project to ensure received data is not
- * missed or corrupted
- * - Fixed Device mode HID Class driver always sending IN packets, even when nothing to report
- * - Fixed Device mode HID Class driver not explicitly initializing the ReportSize parameter to zero before calling callback
- * routine, so that ignored callbacks don't cause incorrect data to be sent
- * - Fixed StillImageHost not correctly freezing and unfreezing data pipes while waiting for a response block header
- * - Fixed error in the PrinterHost demo preventing the full page data from being sent to the attached device (thanks to John Andrews)
- * - Fixed CDC based demos and projects' INF driver files under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker)
- * - Re-add in missing flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)
- * - Fix allowable F_CPU values comment in project makefiles to more accurately reflect the allowable values on the USB AVRs
- * - Fixed DFU and CDC class bootloaders on the series 2 USB AVRs, corrected invalid signatures, added support for the new
- * ATMEGAxx2 series 2 variant AVRs to the DFU bootloader
- * - Fixed Low Level USBtoSerial demo not storing received characters (thanks to Michael Cooper)
- * - Fixed MIDI Device Class driver not sending/receiving MIDI packets of the correct size (thanks to Thomas Bleeker)
- *
- *
- * \section Sec_ChangeLog090810 Version 090810
- *
- * <b>New:</b>
- * - Added new device class drivers and matching demos to the library for rapid application development
- * - Added new PrinterHost demo (thanks to John Andrews)
- * - Added USB Missile Launcher project, submitted by Dave Fletcher
- * - Added new Benito Arduino Programmer project
- * - Added incomplete device and host mode demos for later enhancement
- * - Updated MassStorage device block write routines to use ping-pong Dataflash buffering to increase throughput by around 30%
- * - Error status LEDs shown when device endpoint configuration fails to complete in all demos and projects
- * - Added new USB_Host_SetDeviceConfiguration() convenience function for easy configuration selection of devices while in USB
- * host mode
- * - Added new USB_Host_ClearPipeStall() convenience function to clear a stall condition on an attached device's endpoint
- * - Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor
- * - Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers
- * - Added new USE_INTERNAL_SERIAL define for using the unique serial numbers in some AVR models as the USB device's serial number,
- * added NO_INTERNAL_SERIAL compile time option to turn off new serial number reading code
- * - Added new DATAFLASH_CHIP_MASK() macro to the Dataflash driver, which returns the Dataflash select mask for the given chip index
- * - Added new HOST_STATE_WaitForDeviceRemoval host state machine state for non-blocking disabling of device communications until the
- * device has been removed (for use when an error occurs or communications with the device have completed)
- * - Added new FAST_STREAM_TRANSFERS compile time option for faster stream transfers via multiple bytes copied per stream loop
- * - Added stdio stream demo code to the CDC device demos, to show how to create standard streams out of the virtual serial ports
- * - Added new EEPROM and FLASH buffer versions of the Endpoint and Pipe stream functions
- * - Added new USE_FLASH_DESCRIPTORS and FIXED_NUM_CONFIGURATIONS compile time options
- * - Added support for the new ATMEGA32U2, ATMEGA16U2 and ATMEGA8U2 AVR models
- * - Added new USB_DeviceState variable to keep track of the current Device mode USB state
- * - Added new LEDs_ToggleLEDs() function to the LEDs driver
- * - Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions
- * - Added new DEVICE_STATE_AS_GPIOR and HOST_STATE_AS_GPIOR compile time options
- * - Added 404 Not Found errors to the webserver in the RNDIS demos to indicate invalid URLs
- *
- * <b>Changed:</b>
- * - Deprecated pseudo-scheduler and removed dynamic memory allocator from the library (first no longer needed and second unused)
- * - The device-mode CALLBACK_USB_GetDescriptor() function now has an extra parameter so that the memory space in which the requested
- * descriptor is located can be specified. This means that descriptors can now be located in multiple memory spaces within a device.
- * - Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality
- * - Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead
- * - Extended USB_GetDeviceConfigDescriptor() routine to require the configuration number within the device to fetch
- * - Dataflash_WaitWhileBusy() now always ensures that the dataflash is ready for the next command immediately after returning,
- * no need to call Dataflash_ToggleSelectedChipCS() afterwards
- * - Low level API MIDI device demo no longer blocks if a note change event is sent while the endpoint is not ready
- * - Pipe_GetErrorFlags() now returns additional error flags for overflow and underflow errors
- * - Pipe stream functions now automatically set the correct pipe token, so that bidirectional pipes can be used
- * - Pipe_ConfigurePipe() now automatically defaults IN pipes to accepting infinite IN requests, this can still be changed by calling
- * the existing Pipe_SetFiniteINRequests() function
- * - Changed F_USB entries in project makefiles to alias to F_CPU by default, as this is the most common case
- * - Host mode demos now use sane terminal escape codes, so that text is always readable and events/program output is visually distinguished
- * from one another using foreground colours
- * - Internal per-device preprocessing conditions changed to per-device series rather than per-controller group for finer-grain
- * internal control
- * - Interrupts are no longer disabled during the processing of Control Requests on the default endpoint while in device mode
- * - AudioOutput demos now always output to board LEDs, regardless of output mode (removed AUDIO_OUT_LEDS project option)
- * - Removed SINGLE_DEVICE_CONFIGURATION compile time option in favor of the new FIXED_NUM_CONFIGURATIONS option so that the exact number
- * of device configurations can be defined statically
- * - Removed VBUS events, as they are already exposed to the user application via the regular device connection and disconnection events
- * - Renamed and altered existing events to properly separate out Host and Device mode events
- * - All demos switched over from GNU99 standards mode to C99 standards mode, to reduce the dependencies on GCC-only language extensions
- *
- * <b>Fixed:</b>
- * - Changed bootloaders to use FLASHEND rather than the existence of RAMPZ to determine if far FLASH pointers are needed to fix
- * bootloaders on some of the USB AVR devices where avr-libc erroneously defines RAMPZ
- * - Fixes to MassStorageHost for better device compatibility (increase command timeout, change MassStore_WaitForDataReceived()
- * to only unfreeze and check one data pipe at a time) to prevent incorrect device enumerations and freezes while transferring data
- * - Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is
- * cleared to prevent endpoint type corruption
- * - Fixed issue opening CDC-ACM ports on hosts when the CDC device tries to send data before the host has set the line encoding
- * - Fixed USB_OPT_MANUAL_PLL option being ignored during device disconnects on some models (thanks to Brian Dickman)
- * - Fixed documentation mentioning Pipe_GetCurrentToken() function when correct function name is Pipe_GetPipeToken()
- * - Fixed ADC driver for the ATMEGA32U4 and ATMEGA16U4 (thanks to Opendous Inc.)
- * - Fixed CDCHost demo unfreezing the pipes at the point of configuration, rather than use
- * - Fixed MassStorage demo not clearing the reset flag when a Mass Storage Reset is issued while not processing a command
- * - Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails
- * - Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used
- * - Fixed Host mode to Device mode UID change not causing a USB Disconnect event when a device was connected
- * - Fixed Mouse/Keyboard demos not performing the correct arithmetic on the Idle period at the right times (thanks to Brian Dickman)
- * - Fixed GenericHID failing HID class tests due to incorrect Logical Minimum and Logical Maximum values (thanks to Soren Greiner)
- * - Fixed incorrect PIPE_EPNUM_MASK mask causing pipe failures on devices with endpoint addresses of 8 and above (thanks to John Andrews)
- * - Fixed report data alignment issues in the MouseHostWithParser demo when X and Y movement data size is not a multiple of 8 bits
- * - Fixed HID Report Descriptor Parser not correctly resetting internal states when a REPORT ID element is encountered
- * - Fixed incorrect BUTTONS_BUTTON1 for the STK526 target
- * - Fixed RNDIS demos freezing when more than one connection was attempted simultaneously, causing memory corruption
- * - Fixed USBtoSerial demo receiving noise from the USART due to pull-up not being enabled
- *
- *
- * \section Sec_ChangeLog090605 Version 090605
- *
- * - Fixed bug in RNDISEthernet and DualCDC demos not using the correct USB_ControlRequest structure for control request data
- * - Fixed documentation showing incorrect USB mode support on the supported AVRs list
- * - Fixed RNDISEthernet not working under Linux due to Linux requiring an "optional" RNDIS request which was unhandled
- * - Fixed Mouse and Keyboard device demos not acting in accordance with the HID specification for idle periods (thanks to Brian Dickman)
- * - Removed support for endpoint/pipe non-control interrupts; these did not act in the way users expected, and had many subtle issues
- * - Fixed Device Mode not handling Set Feature and Clear Feature Chapter 9 requests that are addressed to the device (thanks to Brian Dickman)
- * - Moved control endpoint interrupt handling into the library itself, enable via the new INTERRUPT_CONTROL_ENDPOINT token
- * - Fixed CDCHost not clearing configured pipes and resetting configured pipes mask when a partially enumerated invalid CDC
- * interface is skipped
- * - Clarified the size of library tokens which accept integer values in the Compile Time Tokens page, values now use the smallest datatype
- * inside the library that is able to hold their defined value to save space
- * - Removed DESCRIPTOR_ADDRESS() macro as it was largely superfluous and only served to obfuscate code
- * - Rewritten event system to remove all macros, to make user code clearer
- * - Fixed incorrect ENDPOINT_EPNUM_MASK mask preventing endpoints above EP3 from being selected (thanks to Jonathan Oakley)
- * - Removed STREAM_CALLBACK() macro - callbacks now use regular function definitions to clarify user code
- * - Removed DESCRIPTOR_COMPARATOR() macro - comparators should now use regular function definitions to clarify user code
- * - USB_IsConnected is now cleared before the USB_Disconnect() event is fired in response to VBUS being removed
- * - Fixed incorrect PID value being used in the USBtoSerial project (thanks to Phill)
- * - Deleted StdDescriptors.c, renamed USB_GetDescriptor() to CALLBACK_USB_GetDescriptor, moved ConfigDescriptor.c/.h from the
- * LUFA/Drivers/USB/Class/ directory to LUFA/Drivers/USB/HighLevel/ in preparation for the new USB class APIs
- * - Moved out each demos' functionality library files (e.g. Ring Buffer library) to /Lib directories for a better directory structure
- * - Removed Tx interrupt from the USBtoSerial demo; now sends characters via polling to ensure more time for the Rx interrupt
- * - Fixed possible enumeration errors from spin-loops which may fail to exit if the USB connection is severed before the exit condition
- * becomes true
- *
- *
- * \section Sec_ChangeLog090510 Version 090510
- *
- * - Added new GenericHIDHost demo
- * - Corrections to the KeyboardHost and MouseHost demos' pipe handling to freeze and unfreeze the data pipes at the point of use
- * - KeyboardHost, MouseHost and GenericHIDHost demos now save and restore the currently selected pipe inside the pipe ISR
- * - Changed GenericHID device demo to use the LUFA scheduler, added INTERRUPT_DATA_ENDPOINT and INTERRUPT_CONTROL_ENDPOINT compile
- * time options
- * - All comments in the library, bootloaders, demos and projects have now been spell-checked and spelling mistakes/typos corrected
- * - Added new PIMA_DATA_SIZE() define to the Still Image Host demo
- * - Add call to MassStore_WaitForDataReceived() in MassStore_GetReturnedStatus() to ensure that the CSW has been received in the
- * extended MSC timeout period before continuing, to prevent long processing delays from causing the MassStore_GetReturnedStatus()
- * to early-abort (thanks to Dmitry Maksimov)
- * - Move StdRequestType.h, StreamCallbacks.h, USBMode.h from the LowLevel USB driver directory to the HighLevel USB driver directory,
- * where they are more suited
- * - Removed all binary constants and replaced with decimal or hexadecimal constants so that unpatched GCC compilers can still build the
- * code without having to be itself patched and recompiled first
- * - Added preprocessor checks and documentation to the bootloaders giving information about missing SIGNATURE_x defines due to
- * outdated avr-libc versions.
- * - Added support to the CDCHost demo for devices with multiple CDC interfaces which are not the correct ACM type preceding the desired
- * ACM CDC interface
- * - Fixed GenericHID demo not starting USB and HID management tasks when not using interrupt driven modes (thanks to Carl Kjeldsen)
- * - Fixed RNDISEthenet demo checking the incorrect message field for packet size constraints (thanks to Jonathan Oakley)
- * - Fixed WriteNextReport code in the GenericHIDHost demo using incorrect parameter types and not selecting the correct endpoint
- * - Adjusted sample CTC timer calculations in the AudioOutput and AudioInput demos to match the CTC calculations in the AVR datasheet,
- * and to fix instances where rounding caused the endpoint to underflow (thanks to Robin Theunis)
- * - The USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0), so that other control type
- * pipes can be used with the function
- * - The USB Host management task now saves and restores the currently selected pipe before and after the task completes
- * - Fixed GenericHIDHost demo report write routine incorrect for control type requests (thanks to Andrei Krainev)
- * - Removed Endpoint_ClearCurrentBank() and Pipe_ClearCurrentBank() in favor of new Endpoint_ClearIN(), Endpoint_ClearOUT(),
- * Pipe_ClearIN() and Pipe_ClearOUT() macros (done to allow for the detection of packets of zero length)
- * - Renamed *_ReadWriteAllowed() macros to *_IsReadWriteAllowed() to remain consistent with the rest of the LUFA API
- * - Endpoint_IsSetupReceived() macro has been renamed to Endpoint_IsSETUPReceived(), Endpoint_ClearSetupReceived() macro has been
- * renamed to Endpoint_ClearSETUP(), the Pipe_IsSetupSent() macro has been renamed to Pipe_IsSETUPSent() and the
- * Pipe_ClearSetupSent() macro is no longer applicable and should be removed - changes made to compliment the new endpoint and pipe
- * bank management API
- * - Updated all demos, bootloaders and projects to use the new endpoint and pipe management APIs (thanks to Roman Thiel from Curetis AG)
- * - Updated library doxygen documentation, added groups, changed documentation macro functions to real functions for clarity
- * - Removed old endpoint and pipe aliased read/write/discard routines which did not have an explicit endian specifier for clarity
- * - Removed the ButtLoadTag.h header file, as no one used for its intended purpose anyway
- * - Renamed the main Drivers/AT90USBXXX directory to Drivers/Peripheral, renamed the Serial_Stream driver to SerialStream
- * - Fixed CDC and USBtoSerial demos freezing where buffers were full while still transmitting or receiving (thanks to Peter Hand)
- * - Removed "Host_" section of the function names in ConfigDescriptor.h, as most of the routines can now be used in device mode on the
- * device descriptor
- * - Renamed functions in the HID parser to have a "USB_" prefix and the acronym "HID" in the name
- * - Fixed incorrect HID interface class and subclass values in the Mouse and KeyboardMouse demos (thanks to Brian Dickman)
- * - Capitalized the "Descriptor_Search" and "Descriptor_Search_Comp" prefixes of the values in the DSearch_Return_ErrorCodes_t and
- * DSearch_Comp_Return_ErrorCodes_t enums
- * - Removed "ERROR" from the enum names in the endpoint and pipe stream error code enums
- * - Renamed the USB_PowerOnErrorCodes_t enum to USB_InitErrorCodes_t, renamed the POWERON_ERROR_NoUSBModeSpecified enum value to
- * USB_INITERROR_NoUSBModeSpecified
- * - Renamed USB_PowerOnFail event to USB_InitFailure
- * - Renamed OTG.h header functions to be more consistent with the rest of the library API
- * - Changed over all deprecated GCC structure tag initializers to the standardized C99 format (thanks to Mike Alexander)
- * - USB_HostRequest renamed to USB_ControlRequest, entire control request header is now read into USB_ControlRequest in Device mode
- * rather than having the library pass only partially read header data to the application
- * - The USB_UnhandledControlPacket event has had its parameters removed, in favor of accessing the new USB_ControlRequest structure
- * - The Endpoint control stream functions now correctly send a ZLP to the host when less data than requested is sent
- * - Fixed USB_RemoteWakeupEnabled flag never being set (the REMOTE WAKEUP Set Feature request was not being handled)
- * - Renamed the FEATURELESS_CONTROL_ONLY_DEVICE compile-time token to CONTROL_ONLY_DEVICE
- * - Endpoint configuration is now refined to give better output when all configurations have static inputs - removed the now useless
- * STATIC_ENDPOINT_CONFIGURATION compile time token
- * - Fixed SPI driver init function not clearing SPI2X bit when not needed
- * - Fixed PREVENT ALLOW MEDIUM REMOVAL command issuing in the MassStorageHost demo using incorrect parameters (thanks to Mike Alex)
- * - Fixed MassStorageHost demo broken due to an incorrect if statement test in MassStore_GetReturnedStatus()
- * - Fixed reversed signature byte ordering in the CDC bootloader (thanks to Johannes Raschke)
- * - Changed PIPE_CONTROLPIPE_DEFAULT_SIZE from 8 to 64 to try to prevent problems with faulty devices which do not respect the given
- * wLength value when reading in the device descriptor
- * - Fixed missing semicolon in the ATAVRUSBRF01 LED board driver code (thanks to Morten Lund)
- * - Changed LED board driver code to define dummy LED masks for the first four board LEDs, so that user code can be compiled for boards
- * with less than four LEDs without code modifications (thanks to Morten Lund)
- * - Changed HWB board driver to Buttons driver, to allow for the support of future boards with more than one mounted GPIO button
- * - Serial driver now correctly calculates the baud register value when in double speed mode
- * - Init function of the Serial driver is now static inline to product smaller code for the common-case of static init values
- *
- *
- * \section Sec_ChangeLog090401 Version 090401
- *
- * - Fixed MagStripe project configuration descriptor containing an unused (blank) endpoint descriptor
- * - Incorporated makefile changes by Denver Gingerich to retain compatibility with stock (non-WinAVR) AVR-GCC installations
- * - Fixed makefile EEPROM programming targets programming FLASH data in addition to EEPROM data
- * - LUFA devices now enumerate correctly with LUFA hosts
- * - Fixed Configuration Descriptor search routine freezing when a comparator returned a failure
- * - Removed HID report item serial dump in the MouseHostWithParser and KeyboardHostWithParser - useful only for debugging, and
- * slowed down the enumeration of HID devices too much
- * - Increased the number of bits per track which can be read in the MagStripe project to 8192 when compiled for the AT90USBXXX6/7
- * - Fixed KeyboardMouse demo discarding the wIndex value in the REQ_GetReport request
- * - USBtoSerial demo now discards all Rx data when not connected to a USB host, rather than buffering characters for transmission
- * next time the device is attached to a host.
- * - Added new F_USB compile time constant to the library and makefiles, to give the raw input clock (used to feed the PLL before any
- * clock prescaling is performed) frequency, so that the PLL prescale mask can be determined
- * - Changed stream wait timeout counter to be 16-bit, so that very long timeout periods can be set for correct communications with
- * badly designed hosts or devices which greatly exceed the USB specification limits
- * - Mass Storage Host demo now uses a USB_STREAM_TIMEOUT_MS of two seconds to maintain compatibility with poorly designed devices
- * - Function attribute ATTR_ALWAYSINLINE renamed to ATTR_ALWAYS_INLINE to match other function attribute macro naming conventions
- * - Added ATTR_ALWAYS_INLINE attribute to several key inlined library components, to ensure they are inlined in all circumstances
- * - Removed SetSystemClockPrescaler() macro, the clock_prescale_set() avr-libc macro has been corrected in recent avr-libc versions
- * - Fixed incorrect/missing control status stage transfers on demos, bootloaders and applications (thanks to Nate Lawson)
- * - The NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded
- * to also remove parts of the Get Status chapter 9 request to further reduce code usage
- * - Makefile updated to include output giving the currently selected BOARD parameter value
- * - Board Dataflash driver now allows for dataflash ICs which use different shifts for setting the current page/byte address (thanks
- * to Kenneth Clubb)
- * - Added DataflashManager_WriteBlocks_RAM() and DataflashManager_ReadBlocks_RAM() functions to the MassStorage demo, to allow for easy
- * interfacing with a FAT library for dataflash file level access
- * - Corrected CDC class bootloader to fix a few bugs, changed address counter to store x2 addresses for convenience
- * - Fixed typos in the SPI driver SPI_SPEED_FCPU_DIV_64 and SPI_SPEED_FCPU_DIV_128 masks (thanks to Markus Zocholl)
- * - Keyboard and Mouse device demos (normal, data interrupt and fully interrupt driven) combined into unified keyboard and mouse demos
- * - Keyboard and Mouse host demos (normal and data interrupt driven) combined into unified keyboard and mouse demos
- * - Removed AVRISP_Programmer project due to code quality concerns
- * - Fixed CDC demo not sending an empty packet after each transfer to prevent the host from buffering incoming data
- * - Fixed documentation typos and preprocessor checks relating to misspellings of the USE_RAM_DESCRIPTORS token (thanks to Ian Gregg)
- * - Fixed USBTask.h not conditionally including HostChapter9.h only when USB_CAN_BE_HOST is defined (thanks to Ian Gregg)
- * - Fixed incorrect ADC driver init register manipulation (thanks to Tobias)
- * - Added new GenericHID device demo application
- * - Fixed Still Image Host SImage_SendData() function not clearing the pipe bank after sending data
- *
- *
- * \section Sec_ChangeLog090209 Version 090209
- *
- * - PWM timer mode in AudioOut demo changed to Fast PWM for speed
- * - Updated Magstripe project to work with the latest hardware revision
- * - Fixed library not responding to the BCERRI flag correctly in host mode, leading to device lockups
- * - Fixed library handling Get Descriptor requests when not addressed as standard requests to the device or interface (thanks to
- * Nate Lawson)
- * - Fixed serious data corruption issue in MassStorage demo dataflash write routine
- * - Added new NO_CLEARSET_FEATURE_REQUEST compile time token
- * - USB task now restores previous global interrupt state after execution, rather than forcing global interrupts to be enabled
- * - Fixed USB_DeviceEnumerationComplete event firing after each configuration change, rather than once after the initial configuration
- * - Added ENDPOINT_DOUBLEBANK_SUPPORTED() macros to Endpoint.h, altered ENDPOINT_MAX_SIZE() to allow user to specify endpoint
- * - ENDPOINT_MAX_ENDPOINTS changed to ENDPOINT_TOTAL_ENDPOINTS, PIPE_MAX_PIPES changed to PIPE_TOTAL_PIPES
- * - Endpoint and Pipe non-control stream functions now ensure endpoint or pipe is ready before reading or writing
- * - Changed Teensy bootloader to use a watchdog reset when exiting rather than a software jump
- * - Fixed integer promotion error in MassStorage and MassStorageHost demos, corrupting read/write transfers
- * - SPI_SendByte is now SPI_TransferByte, added new SPI_SendByte and SPI_ReceiveByte functions for fast one-way transfer
- * - MassStorage demo changed to use new fast one-way SPI transfers to increase throughput
- * - MassStorage handling of Mass Storage Reset class request improved
- * - Altered MassStorage demo dataflash block read code for speed
- * - Added USB_IsSuspended global flag
- * - Simplified internal Dual Mode (OTG) USB library code to reduce code size
- * - Extended stream timeout period to 100ms from 50ms
- * - Mass Storage Host demo commands now all return an error code from the Pipe_Stream_RW_ErrorCodes_t enum
- * - Added SubErrorCode parameter to the USB_DeviceEnumerationFailed event
- * - VBUS drop interrupt now disabled during the manual-to-auto VBUS delivery handoff
- * - Simplified low level backend so that device/host mode initialization uses the same code paths
- * - Added workaround for faulty Mass Storage devices which do not implement the required GET_MAX_LUN request
- * - Removed buggy Telnet application from the RNDIS demo
- * - Moved Mass Storage class requests in the Mass Storage Host demo to wrapper functions in MassStoreCommands.c
- * - Fixed incorrect SCSI command size value in the Request Sense command in MassStoreCommands.c
- * - Added SetProtocol request to HID class non-parser Mouse and Keyboard demos to force devices to use the correct Boot Protocol
- * - Added new "dfu" and "flip" programming targets to project makefiles
- * - HID_PARSE_Sucessful enum member typo corrected to HID_PARSE_Successful
- * - Changed COLLECTION item structures in the HID descriptor parser to include the collection's Usage Page value
- * - Serial driver now sets Tx line as output, enables pull-up on Rx line
- * - Fixed smaller USB AVRs raising multiple connection and disconnection events when NO_LIMITED_CONTROLLER_CONNECT is disabled
- * - Added HOST_DEVICE_SETTLE_DELAY_MS to give the host delay after a device is connected before it is enumerated
- * - Fixed KeyboardHostWithParser demo linking against the wrong global variables
- * - Completed doxygen documentation of remaining library bootloaders, demos and projects
- * - Fixed incorrect bootloader start address in the TeensyHID bootloader
- * - Added HWB button whole-disk ASCII dump functionality to MassStoreHost demo
- * - Replaced printf_P(PSTR("%c"), {Variable}) calls with putchar(<Variable>) for speed and size savings
- * - Serial driver now accepts baud rates over 16-bits in size, added double speed flag option
- * - Fixed incorrect callback abort return value in Pipe.c
- * - Added new flip-ee and dfu-ee makefile targets (courtesy of Opendous Inc.)
- * - Removed reboot-on-disconnect code from the TeensyHID bootloader, caused problems on some systems
- * - Fixed AudioOutput and AudioInput demos looping on the endpoint data, rather than processing a sample at a time and returning
- * each time the task runs to allow for other tasks to execute
- * - Added support for the Atmel ATAVRUSBRF01 board
- * - Added AVRISP Programmer Project, courtesy of Opendous Inc.
- * - Fixed CDC Host demo not searching through both CDC interfaces for endpoints
- * - Fixed incorrect Product String descriptor length in the DFU class bootloader
- *
- *
- * \section Sec_ChangeLog081224 Version 081224
- *
- * - MyUSB name changed to LUFA, the Lightweight USB Framework for AVRs
- * - Fixed Mass Storage Host demo's MassStore_SendCommand() delay in the incorrect place
- * - Fixed USBtoSerial demo not calling ReconfigureUSART() after a change in the line encoding
- * - Fixed infinite loop in host mode Host-to-Device control transfers with data stages
- * - HID report parser now supports devices with multiple reports in one interface via Report IDs
- * - Fixed RZUSBSTICK board LED driver header incorrect macro definition order causing compile errors
- * - Calling USB_Init() when the USB interface is already configured now forces a complete interface reset
- * and re-enumeration - fixes MyUSB DFU bootloader not switching to app code correctly when soft reset used
- * - Fixed "No newline at end of file" warning when stream callbacks are enabled
- * - DFU bootloader now uses fixed signature bytes per device, rather than reading them out dynamically for size
- * - Added new FIXED_CONTROL_ENDPOINT_SIZE and USE_SINGLE_DEVICE_CONFIGURATION switches to statically define certain values to
- * reduce compiled binary size
- * - Added new NO_LIMITED_CONTROLLER_CONNECT switch to prevent the library from trying to determine bus connection
- * state from the suspension and wake up events on the smaller USB AVRs
- * - Added summary of all library compile time tokens to the documentation
- * - Added overview of the LUFA scheduler to the documentation
- * - Removed MANUAL_PLL_CONTROL compile time token, replaced with a mask for the USB_Init() Options parameter
- * - CDC bootloader now uses the correct non-far or far versions of the pgm_* functions depending on if RAMPZ is defined
- * - Doxygen documentation now contains documentation on all the projects, bootloaders and most demos included with the library
- * - CDC bootloader now runs user application when USB disconnected rather than waiting for a hard reset
- * - MouseHostWithParser and KeyboardHostWithParser now support multiple-report devices
- * - RNDIS demo can now close connections correctly using the new TCP_APP_CLOSECONNECTION() macro - used in Webserver
- * - Fixed the DFU bootloader, no longer freezes up when certain files are programmed into an AVR, made reading/writing faster
- * - Fixed mouse/joystick up/down movements reversed - HID mouse X/Y coordinates use a left-handed coordinate system, not a normal
- * right-handed system
- * - Added stub code to the CDC and USBtoSerial demos showing how to read and set the RS-232 handshake lines - not currently used in
- * the demos, but the example code and supporting defines are now in place
- * - Interrupts are now disabled when processing a control request in device mode, to avoid exceeding the strict control request
- * timing requirements.
- * - All demos now use a central StatusUpdate() function rather than direct calls to the board LED functions, so that the demos can
- * easily be altered to show different LED combinations (or do something else entirely) as the demo's status changes
- * - Removed LED commands from the CDC bootloader, unused by most AVR910 programming software
- * - Fixed RNDIS demo ICMP ping requests echoing back incorrect data
- * - Added DHCP server code to RNDIS demo, allowing for hands-free auto configuration on any PC
- * - Fixed DFU bootloader PID value for the ATMEGA16U4 AVR
- * - Endpoint and Pipe configuration functions now return an error code indicating success or failure
- * - USB Reset in device mode now resets and disables all device endpoints
- * - Added intermediate states to the host mode state machine, reducing the USB task blocking time to no more than 1ms explicitly per
- * invocation when in host mode
- * - Added support for the ATMEGA32U6 microcontroller
- * - Added STATIC_ENDPOINT_CONFIGURATION compile time option, enabled in the bootloaders to minimize space usage
- * - Removed redundant code from the USB device GetStatus() chapter 9 processing routine
- * - Added new TeensyHID bootloader, compatible with the Teensy HID protocol (http://www.pjrc.com/teensy/)
- * - Versions are now numbered by release dates, rather than arbitrary major/minor revision numbers
- * - USB_RemoteWakeupEnabled is now correctly set and cleared by SetFeature and ClearFeature requests from the host
- * - Changed prototype of GetDescriptor, so that it now returns the descriptor size (or zero if the descriptor doesn't exist)
- * rather than passing the size back to the caller through a parameter and returning a boolean
- *
- *
- * \section Sec_ChangeLog153 Version 1.5.3 (081002)
- *
- * - Fixed CDC bootloader using pgmspace macros for some descriptors inappropriately
- * - Updated all Mouse and Keyboard device demos to include boot protocol support (now works in BIOS)
- * - Renamed bootloader directories to remove spaces, which were causing build problems on several OSes
- * - Removed serial number strings from all but the MassStore demo where it is required - users were not
- * modifying the code to either omit the descriptor or use a unique serial per device causing problems
- * when multiple units of the same device were plugged in at the same time
- * - AudioOutput and AudioInput demos now correctly silence endpoints when not enabled by the host
- * - Added KeyboardMouse demo (Keyboard and Mouse functionality combined into a single demo)
- * - Added DriverStubs directory to house board level driver templates, to make MyUSB compatible custom board
- * driver creation easier
- * - Extended MassStorage demo to support multiple LUNs, 2 by default
- * - Fixed incorrect device address mask, preventing the device from enumerating with addresses larger than 63
- * - Fixed incorrect data direction mask in the GetStatus standard request, preventing it from being handled
- * - Fixed incorrect GetStatus standard request for endpoints, now returns the endpoint STALL status correctly
- * - Added in new USB_RemoteWakeupEnabled and USB_CurrentlySelfPowered flags rather than using fixed values
- * - Added DualCDC demo to demonstrate the use of Interface Association Descriptors
- * - Added pipe NAK detection and clearing API
- * - Added pipe status change (NAK, STALL, etc.) interrupt API
- * - Fixed MassStorageHost demo so that it no longer freezes randomly when issuing several commands in a row
- * - Host demos configuration descriptor routines now return a unique error code when the returned data does
- * not have a valid configuration descriptor header
- * - Added Endpoint_WaitUntilReady() and Pipe_WaitUntilReady() functions
- * - Stream functions now have software timeouts, timeout period can be set by the USB_STREAM_TIMEOUT_MS token
- * - All demos now pass the USB.org automated Chapter 9 device compliance tests
- * - All HID demos now pass the USB.org automated HID compliance tests
- * - Polling interval of the interrupt endpoint in the CDC based demos changed to 0xFF to fix problems on Linux systems
- * - Changed stream functions to accept a new callback function, with NO_STREAM_CALLBACKS used to disable all callbacks
- * - Mass Storage demo dataflash management routines changed to use the endpoint stream functions
- * - Added AVRStudio project files for each demo in addition to the existing Programmer's Notepad master project file
- * - Re-added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes
- * are reflected in the hardware (change was previously lost)
- *
- *
- * \section Sec_ChangeLog152 Version 1.5.2 (080731)
- *
- * - Fixed SwapEndian_32() function in Common.h so that it now works correctly (wrong parameter types)
- * - Updated RNDIS demo - notification endpoint is no longer blocking so that it works with faulty Linux RNDIS
- * implementations (where the notification endpoint is ignored in favor of polling the control endpoint)
- * - Fixed incorrect Vendor Description string return size in RNDIS demo for the OID_GEN_VENDOR_DESCRIPTION OID token
- * - Added very basic TCP/IP stack and HTTP/TELNET servers to RNDIS demo
- * - Fixed DFU bootloader exit causing programming software to complain about failed writes
- * - Fixed DFU bootloader EEPROM programming mode wiping first flash page
- * - Fixed Clear/Set Feature device standard request processing code (fixing MassStorage demo in the process)
- * - Added support for the ATMEGA16U4 AVR microcontroller
- * - Library license changed from LGPLv3 to MIT license
- *
- *
- * \section Sec_ChangeLog151 Version 1.5.1 (080707)
- *
- * - Changed host demos to enable the host function task on the firing of the USB_DeviceEnumerationComplete event
- * rather than the USB_DeviceAttached event
- * - HID Usage Stack now forcefully cleared after an IN/OUT/FEATURE item has been completely processed to remove
- * any referenced but not created usages
- * - Changed USB_INT_DisableAllInterrupts() and USB_INT_ClearAllInterrupts(), USB_Host_GetNextDescriptorOfType(),
- * USB_Host_GetNextDescriptorOfTypeBefore(), USB_Host_GetNextDescriptorOfTypeAfter() to normal functions (from inline)
- * - Fixed USBtoSerial demo not sending data, only receiving
- * - Fixed main makefile to make all by default, fixed MagStripe directory case to prevent case-sensitive path problems
- * - ConfigDescriptor functions made normal, instead of static inline
- * - Pipe/Endpoint *_Ignore_* functions changed to *_Discard_*, old names still present as aliases
- * - Fixed ENDPOINT_MAX_SIZE define to be correct on limited USB controller AVRs
- * - Changed endpoint and pipe size translation routines to use previous IF/ELSE IF cascade code, new algorithmic
- * approach was buggy and caused problems
- * - Bootloaders now compile with -fno-inline-small-functions option to reduce code size
- * - Audio demos now use correct endpoint sizes for full and limited controller USB AVRs, double banking in all cases
- * to be in line with the specification (isochronous endpoints MUST be double banked)
- * - Added Interface Association descriptor to StdDescriptors.h, based on the relevant USB2.0 ECN
- * - Fixed MIDI demo, corrected Audio Streaming descriptor to follow the MIDI-specific AS structure
- * - Fixed HID class demo descriptors so that the HID interface's protocol is 0x00 (required for non-boot protocol HID
- * devices) to prevent problems on hosts expecting the boot protocol functions to be supported
- * - Added read/write control stream functions to Endpoint.h
- * - Fixed AudioOut demo not setting port pins to inputs on USB disconnect properly
- * - Added RNDISEthernet demo application
- *
- *
- * \section Sec_ChangeLog150 Version 1.5.0 (080610)
- *
- * - Fixed MIDI demo, now correctly waits for the endpoint to be ready between multiple note messages
- * - Added CDC Host demo application
- * - Added KeyboardFullInt demo application
- * - Endpoint and Pipe creation routines now mask endpoint/pipe size with the size mask, to remove transaction
- * size bits not required for the routines (improves compatibility with devices)
- * - Fixed AudioInput demo - now correctly sends sampled audio to the host PC
- * - Fixed AudioOutput demo once more -- apparently Windows requires endpoint packets to be >=192 bytes
- * - Shrunk round-robbin scheduler code slightly via the use of struct pointers rather than array indexes
- * - Fixed off-by-one error when determining if the Usage Stack is full inside the HID Report parser
- * - Renamed Magstripe.h to MagstripeHW.h and moved driver out of the library and into the MagStripe demo folder
- * - Added preprocessor checks to enable C linkage on the library components when used with a C++ compiler
- * - Added Still Image Host demo application
- * - The USB device task now restores the previously selected endpoint, allowing control requests to be transparently
- * handled via interrupts while other endpoints are serviced through polling
- * - Fixed device signature being sent in reverse order in the CDC bootloader
- * - Host demos now have a separate ConfigDescriptor.c/.h file for configuration descriptor processing
- * - HostWithParser demos now have a separate HIDReport.c/.h file for HID report processing and dumping
- * - Removed non-mandatory commands from MassStorage demo to save space, fixed SENSE ResponseCode value
- * - CDC demos now send empty packets after sending a full one to prevent buffering issues on the host
- * - Updated demo descriptors to use VID/PID values donated by Atmel
- * - Added DoxyGen documentation to the source files
- * - Fixed Serial_IsCharReceived() definition, was previously reversed
- * - Removed separate USB_Descriptor_Language_t descriptor, USB_Descriptor_String_t is used instead
- * - Removed unused Device Qualifier descriptor structure
- * - Renamed the USB_CreateEndpoints event to the more appropriate USB_ConfigurationChanged
- * - Fixed MassStorageHost demo reading in the block data in reverse
- * - Removed outdated typedefs in StdRequestType.h, superseded by the macro masks
- * - Corrected OTG.h is now included when the AVR supports both Host and Device modes, for creating OTG products
- * - USB_DeviceEnumerationComplete event is now also fired when in device mode and the host has finished its enumeration
- * - Interrupt driven demos now properly restore previously selected endpoint when ISR is complete
- * - The value of USB_HOST_TIMEOUT_MS can now be overridden in the user project makefile to a custom fixed timeout value
- * - Renamed USB_Host_SOFGeneration_* macros to more friendly USB_Host_SuspendBus(), USB_Host_ResumeBus()
- * and USB_Host_IsBusSuspended()
- * - Renamed *_*_Is* macros to *_Is* to make all flag checking macros consistent, Pipe_SetInterruptFreq() is now
- * Pipe_SetInterruptPeriod() to use the correct terminology
- * - UnicodeString member of USB_Descriptor_String_t struct changed to an ordinary int array type, so that the GCC
- * Unicode strings (prefixed with an L before the opening quotation mark) can be used instead of explicit arrays
- * of ASCII characters
- * - Fixed Endpoint/Pipes being configured incorrectly if the maximum endpoint/pipe size for the selected USB AVR
- * model was given as the bank size
- * - HID device demos now use a true raw array for the HID report descriptor rather than a struct wrapped array
- * - Added VERSION_BCD() macro, fixed reported HID and USB version numbers in demo descriptors
- * - Cleaned up GetDescriptor device chapter 9 handler function
- * - Added GET_REPORT class specific request to HID demos to make them complaint to the HID class
- * - Cleaned up setting of USB_IsInitialized and USB_IsConnected values to only when needed
- * - Removed Atomic.c and ISRMacro.h; the library was already only compatible with recent avr-lib-c for other reasons
- * - All demos and library functions now use USB standardized names for the USB data (bRequest, wLength, etc.)
- * - Added USE_NONSTANDARD_DESCRIPTOR_NAMES token to switch back to the non-standard descriptor element names
- *
- *
- * \section Sec_ChangeLog141 Version 1.4.1 (090519)
- *
- * - Enhanced KeyboardWithParser demo, now prints out pressed alphanumeric characters like the standard demo
- * - Fixed MassStorage demo, read/writes using non mode-10 commands now work correctly
- * - Corrected version number in Version.h
- *
- *
- * \section Sec_ChangeLog140 Version 1.4.0 (090505)
- *
- * - Added HID Report Parser API to the library
- * - Added Mouse and Keyboard host demo applications, using the new HID report parser engine
- * - Added MouseFullInt demo, which demonstrates a fully interrupt (including control requests) mouse device
- * - Fixed incorrect length value in the audio control descriptor of the AudioOutput and AudioInput demos
- * - Added MIDI device demo application to the library
- * - Fixed problem preventing USB devices from being resumed from a suspended state
- * - Added new CDC class bootloader to the library, based on the AVR109 bootloader protocol
- * - Added header to each demo application indicating the mode, class, subclass, standards used and supported speed
- * - Functions expecting endpoint/pipe numbers are no longer automatically masked against ENDPOINT_EPNUM_MASK or
- * PIPE_PIPENUM_MASK - this should be manually added to code which requires it
- * - Fixed DFU class bootloader - corrected frequency of flash page writes, greatly reducing programming time
- * - Renamed AVR_HOST_GetDeviceConfigDescriptor() to USB_Host_GetDeviceConfigDescriptor() and AVR_HOST_GetNextDescriptor()
- * to USB_Host_GetNextDescriptor()
- * - Added new USB_Host_GetNextDescriptorOfTypeBefore() and USB_Host_GetNextDescriptorOfTypeAfter() routines
- * - Moved configuration descriptor routines to MyUSB/Drivers/USB/Class/, new accompanying ConfigDescriptors.c file
- * - Added new configuration descriptor comparator API for more powerful descriptor parsing, updated host demos to use the
- * new comparator API
- * - Fixed MassStorageHost demo capacity printout, and changed data read/write mode from little-endian to the correct
- * big-endian for SCSI devices
- * - Fixed macro/function naming consistency; USB_HOST is now USB_Host, USB_DEV is now USB_Device
- * - Added better error reporting to host demos
- * - Added 10 microsecond delay after addressing devices in host mode, to prevent control stalls
- *
- *
- * \section Sec_ChangeLog132 Version 1.3.2 (080401)
- *
- * - Added call to ReconfigureUSART() in USBtoSerial SetLineCoding request, so that baud rate changes
- * are reflected in the hardware
- * - Fixed CDC and USBtoSerial demos - Stream commands do not work for control endpoints, and the
- * GetLineCoding request had an incorrect RequestType mask preventing it from being processed
- * - Improved reliability of the USBtoSerial demo, adding a busy wait while the buffer is full
- * - Device control endpoint size is now determined from the device's descriptors rather than being fixed
- * - Separated out SPI code into new SPI driver in AT90USBXXX driver directory
- * - Bootloader now returns correct PID for the selected USB AVR model, not just the AT90USB128X PID
- * - Added support for the RZUSBSTICK board
- * - Bicolour driver removed in favor of generic LEDs driver
- * - Added support for the ATMEGA32U4 AVR
- * - Added MANUAL_PLL_CONTROL compile time option to prevent the USB library from manipulating the PLL
- *
- *
- * \section Sec_ChangeLog131 Version 1.3.1 (080319)
- *
- * - Fixed USB to Serial demo - class value in the descriptors was incorrect
- * - Control endpoint size changed from 64 bytes to 8 bytes to save on USB FIFO RAM and to allow low
- * speed mode devices to enumerate properly
- * - USB to Serial demo data endpoints changed to dual-banked 16 byte to allow the demo to work
- * on USB AVRs with limited USB FIFO RAM
- * - Changed demo endpoint numbers to use endpoints 3 and 4 for double banking, to allow limited
- * USB device controller AVRs (AT90USB162, AT90USB82) to function correctly
- * - Updated Audio Out demo to use timer 1 for AVRs lacking a timer 3 for the PWM output
- * - Fixed incorrect USB_DEV_OPT_HIGHSPEED entry in the Mass Storage device demo makefile
- * - Optimized Mass Storage demo for a little extra transfer speed
- * - Added LED indicators to the Keyboard demo for Caps Lock, Num Lock and Scroll Lock
- * - Added Endpoint_Read_Stream, Endpoint_Write_Stream, Pipe_Read_Stream and Pipe_Write_Stream functions
- * (including Big and Little Endian variants)
- * - Made Dataflash functions inline for speed, removed now empty Dataflash.c driver file
- * - Added new SetSystemClockPrescaler() macro (thanks to Joerg Wunsch)
- * - Fixed Endpoint_ClearStall() to function correctly on full USB controller AVRs (AT90USBXXX6/7)
- * - Endpoint_Setup_In_Clear() and Endpoint_Setup_Out_Clear() no longer set FIFOCON, in line with the
- * directives in the datasheet
- * - Fixed PLL prescaler defines for all AVR models and frequencies
- * - Fixed ENDPOINT_INT_IN and ENDPOINT_INT_OUT definitions
- * - Added interrupt driven keyboard and mouse device demos
- * - Combined USB_Device_ClearFeature and USB_Device_SetFeature requests into a single routine for code
- * size savings
- * - Added missing Pipe_GetCurrentPipe() macro to Pipe.h
- *
- *
- * \section Sec_ChangeLog130 Version 1.3.0 (080307)
- *
- * - Unnecessary control endpoint config removed from device mode
- * - Fixed device standard request interpreter accidentally processing some class-specific requests
- * - Added USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS compile time options to instruct the library
- * to use descriptors stored in RAM or EEPROM rather than flash memory
- * - All demos now disable watchdog on startup, in case it has been enabled by fuses or the bootloader
- * - USB_DEV_OPT_LOWSPEED option now works correctly
- * - Added ability to set the USB options statically for a binary size reduction via the USE_STATIC_OPTIONS
- * compile time define
- * - USB_Init no longer takes a Mode parameter if compiled for a USB device with no host mode option, or
- * if forced to a particular mode via the USB_HOST_ONLY or USB_DEVICE_ONLY compile time options
- * - USB_Init no longer takes an Options parameter if options statically configured by USE_STATIC_OPTIONS
- * - Endpoint_Ignore_* and Pipe_Ignore_* made smaller by making the dummy variable non-volatile so that the
- * compiler can throw away the result more efficiently
- * - Added in an optional GroupID value to each scheduler entry, so that groups of tasks can once again be
- * controlled by the new Scheduler_SetGroupTaskMode() routine
- * - Added support for AT90USB162 and AT90USB82 AVR models
- * - Added support for the STK525 and STK526 boards
- * - Added support for custom board drivers to be supplied by selecting the board type as BOARD_USER, and
- * placing board drivers in {Application Directory}/Board/
- * - PLL is now stopped and USB clock is frozen when detached from host in device mode, to save power
- * - Joystick defines are now in synch with the schematics - orientation will be rotated for the USBKEY
- * - Fixed USB_DEV_IsUSBSuspended() - now checks the correct register
- * - Fixed data transfers to devices when in host mode
- * - Renamed USB_DEV_OPT_HIGHSPEED to USB_DEV_OPT_FULLSPEED and USB_HOST_IsDeviceHighSpeed() to
- * USB_HOST_IsDeviceFullSpeed() to be in line with the official USB speed names (to avoid confusion with
- * the real high speed mode, which is unavailable on the USB AVRs)
- *
- *
- * \section Sec_ChangeLog120 Version 1.2.0 (080204)
- *
- * - Added USB_DeviceEnumerationComplete event for host mode
- * - Added new Scheduler_Init routine to prepare the scheduler, so that tasks can be started and
- * stopped before the scheduler has been started (via Scheduler_Start)
- * - Connection events in both Device and Host mode are now interrupt-driven, allowing the USB management
- * task to be stopped when the USB is not connected to a host or device
- * - All demos updated to stop the USB task when not in use via the appropriate USB events
- * - Mass Storage Host demo application updated to function correctly with all USB flash disks
- * - Mass Storage Host demo application now prints out the capacity and number of LUNs in the attached
- * device, and prints the first block as hexadecimal numbers rather than ASCII characters
- * - Endpoint and Pipe clearing routines now clear the Endpoint/Pipe interrupt and status flags
- * - Shifted error handling code in the host enum state machine to a single block, to reduce code complexity
- * - Added in DESCRIPTOR_TYPE, DESCRIPTOR_SIZE and DESCRIPTOR_CAST macros to make config descriptor processing
- * clearer in USB hosts and DESCRIPTOR_ADDRESS for convenience in USB devices
- * - Added in alloca macro to common.h, in case the user is using an old version of avr-lib-c missing the macro
- *
- *
- * \section Sec_ChangeLog110 Version 1.1.0 (080125)
- *
- * - Fixed DCONNI interrupt being enabled accidentally after a USB reset
- * - Fixed DDISCI interrupt not being disabled when a device is not connected
- * - Added workaround for powerless pull-up devices causing false disconnect interrupts
- * - Added USB_DeviceEnumerationFailed event for Host mode
- * - AVR_HOST_GetDeviceConfigDescriptor routine no longer modifies ConfigSizePtr if a valid buffer
- * pointer is passed
- * - Added ALLOCABLE_BYTES to DynAlloc, and added code to make the size of key storage variables
- * dependant on size of memory parameters passed in via the user project's makefile
- * - Fixed incorrect device reset routine being called in USBTask
- * - Devices which do not connect within the standard 300mS are now supported
- * - Removed incorrect ATTR_PURE from Scheduler_SetTaskMode(), which was preventing tasks from being
- * started/stopped, as well as USB_InitTaskPointer(), which was breaking dual device/host USB projects
- * - Changed scheduler to use the task name rather than IDs for setting the task mode, eliminating the
- * need to have a task ID list
- * - ID transition interrupt now raises the appropriate device/host disconnect event if device attached
- * - Fixed double VBUS change (and VBUS -) event when detaching in device mode
- * - Added ability to disable ANSI terminal codes by the defining of DISABLE_TERMINAL_CODES in makefile
- * - Removed return from ConfigurePipe and ConfigureEndpoint functions - use Pipe_IsConfigured() and
- * Endpoint_IsConfigured() after calling the config functions to determine success
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/CompileTimeTokens.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/CompileTimeTokens.txt deleted file mode 100644 index 966ddd0fe..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/CompileTimeTokens.txt +++ /dev/null @@ -1,223 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_TokenSummary Summary of Compile Tokens
- *
- * The following lists all the possible tokens which can be defined in a project makefile, and passed to the
- * compiler via the -D switch, to alter the LUFA library code. These tokens may alter the library behaviour,
- * or remove features unused by a given application in order to save flash space.
- *
- * \note If the \c USE_LUFA_CONFIG_HEADER token is defined, the library will include a header file named \c LUFAConfig.h located
- * in the user directory where the below compile time tokens may be defined. This allows for an alternative to makefile
- * defined tokens for configuring the library.
- *
- * \section Sec_SummaryNonUSBTokens Non USB Related Tokens
- * This section describes compile tokens which affect non-USB sections of the LUFA library.
- *
- * - <b>DISABLE_TERMINAL_CODES</b> - (\ref Group_Terminal) - <i>All Architectures</i> \n
- * If an application contains ANSI terminal control codes listed in TerminalCodes.h, it might be desired to remove them
- * at compile time for use with a terminal which is non-ANSI control code aware, without modifying the source code. If
- * this token is defined, all ANSI control codes in the application code from the TerminalCodes.h header are removed from
- * the source code at compile time.
- *
- *
- * \section Sec_SummaryUSBClassTokens USB Class Driver Related Tokens
- * This section describes compile tokens which affect USB class-specific drivers in the LUFA library.
- *
- * - <b>HID_HOST_BOOT_PROTOCOL_ONLY</b> - (\ref Group_USBClassHIDHost) - <i>All Architectures</i> \n
- * By default, the USB HID Host class driver is designed to work with HID devices using either the Boot or Report HID
- * communication protocols. On devices where the Report protocol is not used (i.e. in applications where only basic
- * Mouse or Keyboard operation is desired, using boot compatible devices), the code responsible for the Report protocol
- * mode can be removed to save space in the compiled application by defining this token. When defined, it is still necessary
- * to explicitly put the attached device into Boot protocol mode via a call to \ref HID_Host_SetBootProtocol().
- *
- * - <b>HID_STATETABLE_STACK_DEPTH</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n
- * HID reports may contain PUSH and POP elements, to store and retrieve the current HID state table onto a stack. This
- * allows for reports to save the state table before modifying it slightly for a data item, and then restore the previous
- * state table in a compact manner. This token may be defined to a non-zero 8-bit value to give the maximum depth of the state
- * table stack. If not defined, this defaults to the value indicated in the HID.h file documentation.
- *
- * - <b>HID_USAGE_STACK_DEPTH</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n
- * HID reports generally contain many USAGE elements, which are assigned to INPUT, OUTPUT and FEATURE items in succession
- * when multiple items are defined at once (via REPORT COUNT elements). This allows for several items to be defined with
- * different usages in a compact manner. This token may be defined to a non-zero 8-bit value to set the maximum depth of the
- * usage stack, indicating the maximum number of USAGE items which can be stored temporarily until the next INPUT, OUTPUT
- * and FEATURE item. If not defined, this defaults to the value indicated in the HID.h file documentation.
- *
- * - <b>HID_MAX_COLLECTIONS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n
- * HID reports generally contain several COLLECTION elements, used to group related data items together. Collection information
- * is stored separately in the processed usage structure (and referred to by the data elements in the structure) to save space.
- * This token may be defined to a non-zero 8-bit value to set the maximum number of COLLECTION items which can be processed by the
- * parser into the resultant processed report structure. If not defined, this defaults to the value indicated in the HID.h file
- * documentation.
- *
- * - <b>HID_MAX_REPORTITEMS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n
- * All HID reports contain one or more INPUT, OUTPUT and/or FEATURE items describing the data which can be sent to and from the HID
- * device. Each item has associated usages, bit offsets in the item reports and other associated data indicating the manner in which
- * the report data should be interpreted by the host. This token may be defined to a non-zero 8-bit value to set the maximum number of
- * data elements which can be stored in the processed HID report structure, including INPUT, OUTPUT and (if enabled) FEATURE items.
- * If a item has a multiple count (i.e. a REPORT COUNT of more than 1), each item in the report count is placed separately in the
- * processed HID report table. If not defined, this defaults to the value indicated in the HID.h file documentation.
- *
- * - <b>HID_MAX_REPORT_IDS</b>=<i>x</i> - (\ref Group_HIDParser) - <i>All Architectures</i> \n
- * HID reports may contain several report IDs, to logically distinguish grouped device data from one another - for example, a combination
- * keyboard and mouse might use report IDs to separate the keyboard reports from the mouse reports. In order to determine the size of each
- * report, and thus know how many bytes must be read or written, the size of each report (IN, OUT and FEATURE) must be calculated and
- * stored. This token may be defined to a non-zero 8-bit value to set the maximum number of report IDs in a device which can be processed
- * and their sizes calculated/stored into the resultant processed report structure. If not defined, this defaults to the value indicated in
- * the HID.h file documentation.
- *
- * - <b>NO_CLASS_DRIVER_AUTOFLUSH</b> - (\ref Group_USBClassDrivers) - <i>All Architectures</i> \n
- * Many of the device and host mode class drivers automatically flush any data waiting to be written to an interface, when the corresponding
- * USB management task is executed. This is usually desirable to ensure that any queued data is sent as soon as possible once and new data is
- * constructed in the main program loop. However, if flushing is to be controlled manually by the user application via the *_Flush() commands,
- * the compile time token may be defined in the application's makefile to disable automatic flushing during calls to the class driver USB
- * management tasks.
- *
- *
- * \section Sec_SummaryUSBTokens General USB Driver Related Tokens
- * This section describes compile tokens which affect USB driver stack as a whole in the LUFA library.
- *
- * - <b>ORDERED_EP_CONFIG</b> - (\ref Group_EndpointManagement , \ref Group_PipeManagement) - <i>AVR8, UC3</i> \n
- * The USB AVRs do not allow for Endpoints and Pipes to be configured out of order; they <i>must</i> be configured in an ascending order to
- * prevent data corruption issues. However, by default LUFA employs a workaround to allow for unordered Endpoint/Pipe initialization. This compile
- * time token may be used to restrict the initialization order to ascending indexes only in exchange for a smaller compiled binary size. Use
- * caution when applied to applications using the library USB Class drivers; the user application must ensure that all endpoints and pipes are
- * allocated sequentially.
- *
- * - <b>USE_STATIC_OPTIONS</b>=<i>x</i> - (\ref Group_USBManagement) - <i>All Architectures</i> \n
- * By default, the USB_Init() function accepts dynamic options at runtime to alter the library behaviour, including whether the USB pad
- * voltage regulator is enabled, and the device speed when in device mode. By defining this token to a mask comprised of the USB options
- * mask defines usually passed as the Options parameter to USB_Init(), the resulting compiled binary can be decreased in size by removing
- * the dynamic options code, and replacing it with the statically set options. When defined, the USB_Init() function no longer accepts an
- * Options parameter.
- *
- * - <b>USB_DEVICE_ONLY</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n
- * For the USB AVR models supporting both device and host USB modes, the USB_Init() function contains a Mode parameter which specifies the
- * mode the library should be initialized to. If only device mode is required, the code for USB host mode can be removed from the binary to
- * save space. When defined, the USB_Init() function no longer accepts a Mode parameter. This define is irrelevant on smaller USB AVRs which
- * do not support host mode.
- *
- * - <b>USB_HOST_ONLY</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n
- * Same as USB_DEVICE_ONLY, except the library is fixed to USB host mode rather than USB device mode. Not available on some USB AVR models.
- *
- * - <b>USB_STREAM_TIMEOUT_MS</b>=<i>x</i> - (\ref Group_USBManagement) - <i>All Architectures</i> \n
- * When endpoint and/or pipe stream functions are used, by default there is a timeout between each transfer which the connected device or host
- * must satisfy, or the stream function aborts the remaining data transfer. This token may be defined to a non-zero 16-bit value to set the timeout
- * period for stream transfers, specified in milliseconds. If not defined, the default value specified in LowLevel.h is used instead.
- *
- * - <b>NO_LIMITED_CONTROLLER_CONNECT</b> - (\ref Group_Events) - <i>AVR8 Only</i> \n
- * On the smaller USB AVRs, the USB controller lacks VBUS events to determine the physical connection state of the USB bus to a host. In lieu of
- * VBUS events, the library attempts to determine the connection state via the bus suspension and wake up events instead. This however may be
- * slightly inaccurate due to the possibility of the host suspending the bus while the device is still connected. If accurate connection status is
- * required, the VBUS line of the USB connector should be routed to an AVR pin to detect its level, so that the USB_DeviceState global
- * can be accurately set and the \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events manually raised by the RAISE_EVENT macro.
- * When defined, this token disables the library's auto-detection of the connection state by the aforementioned suspension and wake up events.
- *
- * - <b>NO_SOF_EVENTS</b> - (\ref Group_Events) - <i>All Architectures</i> \n
- * By default, there exists a LUFA application event for the start of each USB frame while the USB bus is not suspended in either host or device mode.
- * This event can be selectively enabled or disabled by calling the appropriate device or host mode function. When this compile time token is defined,
- * the ability to receive USB Start of Frame events via the \ref EVENT_USB_Device_StartOfFrame() or \ref EVENT_USB_Host_StartOfFrame() events is removed,
- * reducing the compiled program's binary size.
- *
- *
- * \section Sec_SummaryUSBDeviceTokens USB Device Mode Driver Related Tokens
- * This section describes compile tokens which affect USB driver stack of the LUFA library when used in Device mode.
- *
- * - <b>USE_RAM_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n
- * Define this token to indicate to the USB driver that all device descriptors are stored in RAM, rather than being located in any one
- * of the AVR's memory spaces. RAM descriptors may be desirable in applications where the descriptors need to be modified at runtime.
- *
- * - <b>USE_FLASH_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n
- * Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's FLASH memory rather than RAM.
- *
- * - <b>USE_EEPROM_DESCRIPTORS</b> - (\ref Group_StdDescriptors) - <i>AVR8 Only</i> \n
- * Similar to USE_RAM_DESCRIPTORS, but all descriptors are stored in the AVR's EEPROM memory rather than RAM.
- *
- * - <b>NO_INTERNAL_SERIAL</b> - (\ref Group_StdDescriptors) - <i>All Architectures</i> \n
- * Some AVR models contain a unique serial number which can be used as the device serial number, while in device mode. This allows
- * the host to uniquely identify the device regardless of if it is moved between USB ports on the same computer, allowing allocated
- * resources (such as drivers, COM Port number allocations) to be preserved. This is not needed in many apps, and so the code that
- * performs this task can be disabled by defining this option and passing it to the compiler via the -D switch.
- *
- * - <b>FIXED_CONTROL_ENDPOINT_SIZE</b>=<i>x</i> - (\ref Group_EndpointManagement) - <i>All Architectures</i> \n
- * By default, the library determines the size of the control endpoint (when in device mode) by reading the device descriptor.
- * Normally this reduces the amount of configuration required for the library, allows the value to change dynamically (if
- * descriptors are stored in EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this token can be
- * defined to a non-zero value instead to give the size in bytes of the control endpoint, to reduce the size of the compiled
- * binary.
- *
- * - <b>DEVICE_STATE_AS_GPIOR</b> - (\ref Group_Device) - <i>AVR8 Only</i> \n
- * One of the most frequently used global variables in the stack is the USB_DeviceState global, which indicates the current state of
- * the Device State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token
- * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR
- * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except
- * implicitly via the library APIs.
- *
- * - <b>FIXED_NUM_CONFIGURATIONS</b>=<i>x</i> - (\ref Group_Device) - <i>All Architectures</i> \n
- * By default, the library determines the number of configurations a USB device supports by reading the device descriptor. This reduces
- * the amount of configuration required to set up the library, and allows the value to change dynamically (if descriptors are stored in
- * EEPROM or RAM rather than flash memory) and reduces code maintenance. However, this value may be fixed via this token in the project
- * makefile to reduce the compiled size of the binary at the expense of flexibility.
- *
- * - <b>CONTROL_ONLY_DEVICE</b> - (\ref Group_Device) - <i>All Architectures</i> \n
- * In some limited USB device applications, there are no device endpoints other than the control endpoint; i.e. all device communication
- * is through control endpoint requests. Defining this token will remove several features related to the selection and control of device
- * endpoints internally, saving space. Generally, this is usually only useful in (some) bootloaders and is best avoided.
- *
- * - <b>MAX_ENDPOINT_INDEX</b> - (\ref Group_Device) - <i>XMEGA Only</i> \n
- * Defining this value to the highest index (not address - this excludes the direction flag) endpoint within the device will restrict the
- * number of FIFOs created internally for the endpoint buffers, reducing the total RAM usage.
- *
- * - <b>INTERRUPT_CONTROL_ENDPOINT</b> - (\ref Group_USBManagement) - <i>All Architectures</i> \n
- * Some applications prefer to not call the USB_USBTask() management task regularly while in device mode, as it can complicate code significantly.
- * Instead, when device mode is used this token can be passed to the library via the -D switch to allow the library to manage the USB control
- * endpoint entirely via USB controller interrupts asynchronously to the user application. When defined, USB_USBTask() does not need to be called
- * when in USB device mode.
- *
- * - <b>NO_DEVICE_REMOTE_WAKEUP</b> - (\ref Group_Device) - <i>All Architectures</i> \n
- * Many devices do not require the use of the Remote Wakeup features of USB, used to wake up the USB host when suspended. On these devices,
- * the code required to manage device Remote Wakeup can be disabled by defining this token and passing it to the library via the -D switch.
- *
- * - <b>NO_DEVICE_SELF_POWER</b> - (\ref Group_Device) - <i>All Architectures</i> \n
- * USB devices may be bus powered, self powered, or a combination of both. When a device can be both bus powered and self powered, the host may
- * query the device to determine the current power source, via \ref USB_Device_CurrentlySelfPowered. For solely bus powered devices, this global
- * and the code required to manage it may be disabled by passing this token to the library via the -D switch.
- *
- *
- * \section Sec_SummaryUSBHostTokens USB Host Mode Driver Related Tokens
- *
- * This section describes compile tokens which affect USB driver stack of the LUFA library when used in Host mode.
- *
- * - <b>HOST_STATE_AS_GPIOR</b> - (\ref Group_Host) - <i>AVR8 Only</i> \n
- * One of the most frequently used global variables in the stack is the USB_HostState global, which indicates the current state of
- * the Host State Machine. To reduce the amount of code and time required to access and modify this global in an application, this token
- * may be defined to a value between 0 and 2 to fix the state variable into one of the three general purpose IO registers inside the AVR
- * reserved for application use. When defined, the corresponding GPIOR register should not be used within the user application except
- * implicitly via the library APIs.
- *
- * - <b>USB_HOST_TIMEOUT_MS</b>=<i>x</i> - (\ref Group_Host) - <i>All Architectures</i> \n
- * When a control transfer is initiated in host mode to an attached device, a timeout is used to abort the transfer if the attached
- * device fails to respond within the timeout period. This token may be defined to a non-zero 16-bit value to set the timeout period for
- * control transfers, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.
- *
- * - <b>HOST_DEVICE_SETTLE_DELAY_MS</b>=<i>x</i> - (\ref Group_Host) - <i>All Architectures</i> \n
- * Some devices require a delay of up to 5 seconds after they are connected to VBUS before the enumeration process can be started, or
- * they will fail to enumerate correctly. By placing a delay before the enumeration process, it can be ensured that the bus has settled
- * back to a known idle state before communications occur with the device. This token may be defined to a 16-bit value to set the device
- * settle period, specified in milliseconds. If not defined, the default value specified in Host.h is used instead.
- *
- * - <b>INVERTED_VBUS_ENABLE_LINE</b> - (\ref Group_Host) - <i>All Architectures</i> \n
- * If enabled, this will indicate that the USB target VBUS line polarity is inverted; i.e. it should be pulled low to enable VBUS to the
- * target, and pulled high to stop the target VBUS generation.
- *
- * \attention On AVR8 architecture devices, this compile time option requires \c NO_AUTO_VBUS_MANAGEMENT to be set.
- *
- * - <b>NO_AUTO_VBUS_MANAGEMENT</b> - (\ref Group_Host) - <i>All Architectures</i> \n
- * Disables the automatic management of VBUS to the target, i.e. automatic shut down in the even of an overcurrent situation. When enabled, VBUS
- * is enabled while the USB controller is initialized in USB Host mode.
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/CompilingApps.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/CompilingApps.txt deleted file mode 100644 index 85912b56e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/CompilingApps.txt +++ /dev/null @@ -1,50 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_CompilingApps Compiling the Demos, Bootloaders and Projects
- *
- * The following details how to compile the included LUFA demos, applications and bootloaders using AVR-GCC.
- *
- * \section Sec_Prerequisites Prerequisites
- * Before you can compile any of the LUFA library code or demos, you will need a recent distribution of avr-libc (1.6.2+)
- * and the AVR-GCC (4.2+) compiler. A standard "coreutils" package for your system is also required for command line
- * compilation of LUFA based applications.
- *
- * \subsection SSec_PreqWindows Windows Prerequisites
- * On Windows, you will need a copy of the latest Atmel Toolchain, either downloaded and installed as a standalone
- * package, or installed as part of Atmel Studio. You will need to ensure that the "bin" directory of the toolchain
- * is available in your system's <b>PATH</b> environment variable.
- *
- * In addition, you will need to install a ported version of the ZSH or BASH *nix shells, and a standard set of *nix
- * utilities such as <i>cut</i>, <i>find</i> and <i>sed</i>. These can be found in the "basic" system package of the
- * of the MinGW installer (<a>http://www.mingw.org</a>). Once installed, add the "msys\1.0\bin" of the MinGW installation
- * folder is added to your system's <b>PATH</b> environment variable.
- *
- * The bootloaders currently also require the "bc" application, which can be installed from
- * <a>http://gnuwin32.sourceforge.net/downlinks/bc.php</a>. Once installed add the "GnuWin32\bin" path of the GnuWin32
- * installation folder to your system's <b>PATH</b> environment variable.
- *
- * \subsection SSec_PreqLinux Linux Prerequisites
- * On Linux systems you will need to install the latest Linux distribution of the standalone Atmel Toolchain from the
- * Atmel website for general development, or use the latest avr-libc and avr-gcc packages for your chosen distribution's
- * package manager. For full device support, the Atmel standalone package is recommended.
- *
- * \section Sec_Compiling Compiling a LUFA Application
- * Compiling the LUFA demos, applications and/or bootloaders is very simple. LUFA comes with makefile scripts for
- * each individual demo, bootloader and project folder, as well as scripts in the Demos/, Bootloaders/, Projects/
- * and the LUFA root directory. Compilation of projects can be started from any of the above directories, with a build
- * started from an upper directory in the directory structure executing build of all child directories under it. This
- * means that while a build inside a particular demo directory will build only that particular demo, a build started from
- * the /Demos/ directory will build all LUFA demo projects sequentially.
- *
- * To build a project from the source via the command line, the command <b>"make all"</b> should be executed from the command
- * line in the directory of interest. To remove compiled files (including the binary output, all intermediately files and all
- * diagnostic output files), execute <b>"make clean"</b>. Once a "make all" has been run and no errors were encountered, the
- * resulting binary will be located in the generated ".HEX" file. If your project makes use of pre-initialized EEPROM
- * variables, the generated ".EEP" file will contain the project's EEPROM data.
- *
- * \see \ref Page_BuildSystem for information on the LUFA build system.
- */
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ConfiguringApps.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ConfiguringApps.txt deleted file mode 100644 index f126e69bb..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ConfiguringApps.txt +++ /dev/null @@ -1,104 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_ConfiguringApps Configuring the Demos, Bootloaders and Projects
- *
- * If the target microcontroller model, architecture, clock speed, board or other settings are different from the current
- * settings, they must be changed and the project recompiled from the source code before being programmed into the microcontroller.
- * Most project configuration options are located in the <tt>makefile</tt> build script inside each LUFA application's folder,
- * however some demo or application-specific configuration settings are located in one or more of the source files of the project.
- * See each project's individual documentation for application-specific configuration values.
- *
- * Each project "makefile" contains all the script and configuration data required to compile each project. When opened with
- * any regular basic text editor such as Notepad or WordPad (ensure that the save format is a pure ASCII text format) the
- * build configuration settings may be altered.
- *
- * \see \ref Page_BuildSystem for information on the LUFA build system.
- *
- * \section Sec_AppConfigParams The Default Application Template
- *
- * Below is a copy of the default LUFA application makefile, which can be used as a template for each application.
- *
- * \verbinclude makefile_template
- *
- * Inside each makefile, a number of configuration variables are listed with the syntax "<VARIABLE NAME> = <VALUE>". For
- * each application, the important standard variables which should be altered are:
- *
- * - <b>MCU</b>, the target processor model
- * - <b>ARCH</b>, the target microcontroller architecture
- * - <b>BOARD</b>, the target board hardware
- * - <b>F_CPU</b>, the target CPU master clock frequency, after any prescaling
- * - <b>F_USB</b>, the target raw input clock to the USB module of the processor
- * - <b>OPTIMIZATION</b>, the level of optimization to compile with
- * - <b>TARGET</b>, the name of the target output binary and other files
- * - <b>SRC</b>, the list of source files to compile/assemble/link
- * - <b>LUFA_PATH</b>, the path to the LUFA library core source code
- * - <b>CC_FLAGS</b>, the common command line flags to pass to the C/C++ compiler, assembler and linker
- * - <b>LD_FLAGS</b>, the command line flags to pass to the linker
- *
- * These values should be changed to reflect the build hardware.
- *
- * \subsection SSec_MCU The MCU Parameter
- * This parameter indicates the target microcontroller model for the compiled application. This should be set to the model of the target
- * microcontroller (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the
- * microcontroller models and architectures, as they may make use of peripherals or modes only present in some devices.
- *
- * For supported processor models, see \ref Page_DeviceSupport.
- *
- * \subsection SSec_ARCH The ARCH Parameter
- * This parameter indicates the target microcontroller architecture the library is to be compiled for. Different microcontroller
- * architectures require different source files to be compiled into the final binary, and so this option must be set to the correct
- * architecture for the selected platform.
- *
- * For supported processor architectures, see \ref Page_DeviceSupport.
- *
- * \subsection SSec_BOARD The BOARD Parameter
- * This parameter indicates the target board hardware for the compiled application. Some LUFA library drivers are board-specific,
- * such as the LED driver, and the library needs to know the layout of the target board. If you are using one of the board models listed
- * on the main library page, change this parameter to the board name in all UPPER-case.
- *
- * If you are not using any board-specific drivers in the LUFA library, or you are using a custom board layout, change this to read
- * "USER" (no quotes) instead of a standard board name. If the USER board type is selected and the application makes use of one or more
- * board-specific hardware drivers inside the LUFA library, then the appropriate stub drives files should be copied from the \c /CodeTemplates/DriverStubs/
- * directory into a /Board/ folder inside the application directory, and the stub driver completed with the appropriate code to drive the
- * custom board's hardware.
- *
- * For boards with built in hardware driver support within the LUFA library, see \ref Page_DeviceSupport.
- *
- * \subsection SSec_F_CPU The F_CPU Parameter
- * This parameter indicates the target microcontroller's main CPU clock frequency, in Hz. This is used by many libraries (and applications) for
- * timing related purposes, and should reflect the actual CPU speed after any prescaling or adjustments are performed.
- *
- * \subsection SSec_F_USB The F_USB Parameter
- * This parameter indicates the raw input clock frequency to the USB module within the microcontroller in Hz. This may be very different on some platforms
- * to the main CPU clock or other peripheral/bus clocks.
- *
- * \subsection SSec_OPTIMIZATION The OPTIMIZATION Parameter
- * This parameter indicates the level of optimization to use when compiling the application. This will allow you to compile with an optimization level
- * supported by GCC, from <tt>0</tt> (no optimization) to <tt>3</tt> (fastest runtime optimization) or <tt>s</tt> (smallest size).
- *
- * \subsection SSec_TARGET The TARGET Parameter
- * This parameter indicates the application target name, which is used as the base filename for the build binary and debugging files. This will be the
- * name of the output files once linked together into the final application, ready to load into the target.
- *
- * \subsection SSec_SRC The SRC Parameter
- * This parameter indicates the source files used to compile the application, as a list of C (<tt>*.c</tt>), C++ (<tt>*.cpp</tt>) and Assembly (<tt>*.S</tt>) files. Note that
- * all assembly files must end in a <b>capital</b> .S extension, as lowercase .s files are reserved for GCC intermediate files.
- *
- * \subsection SSec_LUFA_PATH The LUFA_PATH Parameter
- * As each LUFA program requires the LUFA library source code to compile correctly, the application must know where the LUFA library is located. This
- * value specifies the path to the LUFA library core. This path may be relative or absolute, however note than even under Windows based systems the
- * forward-slash (/) path seperator must be used.
- *
- * \subsection SSec_CC_FLAGS The CC_FLAGS Parameter
- * This parameter lists the compiler flags passed to the C/C++ compiler, the assembler and the linker. These are used as-is directly to GCC and thus
- * must match GCC's command line options as given in the GCC manual. This variable may be used to define tokens directly on the command line, enable or
- * disable warnings, adjust the target-specific tuning parameters or other options.
- *
- * \subsection SSec_LD_FLAGS The LD_FLAGS Parameter
- * This parameter lists the linker flags passed exclusively to the linker. These are used as-is directly to GCC and thus must match GCC's command line
- * linker options as given in the GCC manual. This variable may be used to create or relocate custom data sections, or enable linker specific behaviors.
- */
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DevelopingWithLUFA.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DevelopingWithLUFA.txt deleted file mode 100644 index becd58e54..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DevelopingWithLUFA.txt +++ /dev/null @@ -1,23 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/**
- * \page Page_DevelopingWithLUFA Developing With LUFA
- *
- * This section of the manual contains information on LUFA development, such as Getting Started information,
- * information on compile-time tuning of the library and other developer-related sections.
- *
- * <b>Subsections:</b>
- * \li \subpage Page_BuildSystem - The LUFA Buildsystem
- * \li \subpage Page_TokenSummary - Summary of Compile Time Tokens
- * \li \subpage Page_Migration - Migrating from an Older LUFA Version
- * \li \subpage Page_VIDPID - Allocated USB VID and PID Values
- * \li \subpage Page_BuildLibrary - Building as a Linkable Library
- * \li \subpage Page_ExportingLibrary - Exporting LUFA for IDE Use
- * \li \subpage Page_WritingBoardDrivers - How to Write Custom Board Drivers
- * \li \subpage Page_SoftwareBootloaderStart - How to jump to the bootloader in software
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DeviceSupport.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DeviceSupport.txt deleted file mode 100644 index 18e808f4d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DeviceSupport.txt +++ /dev/null @@ -1,432 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/**
- * \page Page_DeviceSupport Device and Hardware Support
- *
- * <b>Atmel Microcontrollers:</b>
- * \li \subpage Page_AVR8Support - Atmel AVR8 Support
- * \li \subpage Page_UC3Support - Atmel AVR32 UC3 Support
- * \li \subpage Page_XMEGASupport - Atmel XMEGA Support
- */
-
-/**
- * \page Page_AVR8Support Atmel 8-Bit AVR (AVR8) Support
- *
- * \section Sec_AVR8Support_Devices Supported Microcontroller Models
- *
- * Currently supported AVR8 models:
- *
- * <table>
- * <tr>
- * <th width="150px">Part</th>
- * <th width="150px">USB Device Mode</th>
- * <th width="150px">USB Host Mode</th>
- * </tr>
- * <tr>
- * <td>AT90USB82</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATMEGA8U2</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>AT90USB162</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATMEGA16U2</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATMEGA16U4</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATMEGA32U2</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATMEGA32U4</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATMEGA32U6</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>AT90USB646</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>AT90USB647</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT90USB1286</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>AT90USB1287</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * </table>
- *
- * \section Sec_AVR8Support_Boards Supported Atmel Boards
- * Currently supported Atmel AVR8 boards (see \ref Group_BoardTypes):
- * - AT90USBKEY
- * - ATAVRUSBRF01
- * - EVK527
- * - RZUSBSTICK
- * - STK525
- * - STK526
- * - XPLAIN (Original green board, <i>not</i> the newer blue XPLAINED family boards)
- *
- * \section Sec_AVR8Support_ThirdParty Supported Third Party Models
- * Currently supported third-party boards (see \ref Group_BoardTypes for makefile \c BOARD constant names):
- * - Adafruit U4 Breakout Board
- * - Arduino Uno
- * - Bitwizard Multio and Big-Multio
- * - Busware BUI
- * - Busware CUL V3
- * - Busware TUL
- * - DorkbotPDX Duce
- * - Fletchtronics Bumble-B (using manufacturer recommended peripheral layout)
- * - Kernel Concepts USBFOO
- * - Linnix UDIP
- * - MattairTech JM-DB-U2
- * - Maximus USB
- * - Micropendous Boards (Micropendous-32U2, Micropendous-1, Micropendous-2)
- * - Microsin AVR-USB162
- * - Minimus USB
- * - Olimex AVR-USB-162
- * - Olimex AVR-USB-32U4
- * - Olimex AVR-USB-T32U4
- * - Olimex AVR-ISP-MK2
- * - Paranoid Studio's US2AX (V1, V2 and V3 hardware revisions)
- * - PJRC Teensy (1.x and 2.x versions)
- * - Sparkfun U2 Breakout Board
- * - TCNISO Blackcat USB JTAG
- * - Tempusdictum Benito
- * - Tom's USBTINY-MKII (all revisions and versions)
- * - Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers)
- */
-
-/**
- * \page Page_UC3Support Atmel 32-Bit UC3 AVR (UC3)
- *
- * \warning The AVR32 UC3 device support is currently <b>experimental</b>, and is included for preview purposes only.
- *
- * \section Sec_UC3Support_Devices Supported Microcontroller Models
- *
- * Currently supported UC3 models:
- *
- * <table>
- * <tr>
- * <th width="150px">Part</th>
- * <th width="150px">USB Device Mode</th>
- * <th width="150px">USB Host Mode</th>
- * </tr>
- * <tr>
- * <td>AT32UC3A064</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A164</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A364</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A364S</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A464</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A464S</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3B064</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3B164</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A0128</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A1128</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A3128</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A3128S</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A4128</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A4128S</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3B0128</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3B1128</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A0256</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A1256</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A3256</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A3256S</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A4256</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A4256S</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3B0256</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3B1256</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A0512</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3A1512</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3B0512</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>AT32UC3B1512</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * </table>
- *
- * \section Sec_UC3Support_Boards Supported Atmel Boards
- *
- * Currently supported Atmel UC3 boards (see \ref Group_BoardTypes):
- * - EVK1100
- * - EVK1101
- * - EVK1104
- *
- * \section Sec_UC3Support_ThirdParty Supported Third Party Models
- *
- * Currently supported third-party boards (see \ref Group_BoardTypes for makefile \c BOARD constant names):
- * - Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers)
- */
-
-/**
- * \page Page_XMEGASupport Atmel USB XMEGA AVR (XMEGA)
- *
- * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only.
- *
- * \section Sec_XMEGASupport_Devices Supported Microcontroller Models
- *
- * Currently supported XMEGA models:
- *
- * <table>
- * <tr>
- * <th width="150px">Part</th>
- * <th width="150px">USB Device Mode</th>
- * <th width="150px">USB Host Mode</th>
- * </tr>
- * <tr>
- * <td>ATXMEGA16A4U</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA32A4U</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA64A4U</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA128A4U</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA64A3U</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA128A3U</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA192A3U</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA256A3U</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA256A3BU</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA128A1U</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA64B3</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA128B3</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA64B1</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA128B1</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA64C3</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA128C3</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA192C3</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA256C3</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA384C3</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA16C4</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * <tr>
- * <td>ATXMEGA32C4</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#EE0000">No</td>
- * </tr>
- * </table>
- *
- * \section Sec_XMEGASupport_Boards Supported Atmel Boards
- * Currently supported Atmel XMEGA boards (see \ref Group_BoardTypes):
- * - XMEGA A3BU Xplained
- * - XMEGA B1 Xplained
- *
- * \section Sec_XMEGASupport_ThirdParty Supported Third Party Models
- * Currently supported third-party boards (see \ref Group_BoardTypes for makefile \c BOARD constant names):
- * - Custom User Boards (with Board Drivers if desired, see \ref Page_WritingBoardDrivers)
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DirectorySummaries.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DirectorySummaries.txt deleted file mode 100644 index b04224677..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/DirectorySummaries.txt +++ /dev/null @@ -1,80 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \dir Platform
- * \brief Platform specific drivers.
- *
- * This folder contains platform specific drivers and defines for various supported architectures. These may or may
- * not be used in a LUFA application, and are provided for convenience purposes.
- *
- * \dir Drivers
- * \brief Library hardware and software drivers.
- *
- * This folder contains all the library hardware and software drivers for each supported board, architecture and
- * microcontroller model.
- *
- * \dir Drivers/Misc
- * \brief Miscellaneous driver files.
- *
- * This folder contains drivers for aspects other than the USB interface, board hardware or microcontroller peripherals.
- *
- * \dir Drivers/Peripheral
- * \brief Microcontroller peripheral driver files.
- *
- * This folder contains drivers for various low level microcontroller peripherals, usually located on the microcontroller
- * die within the same physical chip.
- *
- * \dir Drivers/USB
- * \brief USB controller peripheral driver files.
- *
- * This folder contains the complete LUFA USB stack and controller files, including the core driver and stack, as well
- * as the USB class driver implementations.
- *
- * \dir Drivers/USB/Core
- * \brief Core USB driver files.
- *
- * This folder contains the core USB stack and controller driver files, to correctly implement USB functionality on the
- * target architecture and microcontroller model. This
- *
- * \dir Drivers/USB/Class
- * \brief USB Class helper driver files.
- *
- * This folder contains drivers for implementing functionality of standardized USB classes. These are not used directly by the library,
- * but provide a standard and library-maintained way of implementing functionality from some of the defined USB classes without extensive
- * development effort. Is is recommended that these drivers be used where possible to reduce maintenance of user applications.
- *
- * \dir Drivers/USB/Class/Device
- * \brief USB Device Class helper driver files.
- *
- * Device mode drivers for the standard USB classes.
- *
- * \dir Drivers/USB/Class/Host
- * \brief USB Host Class helper driver files.
- *
- * Host mode drivers for the standard USB classes.
- *
- * \dir Drivers/Board
- * \brief Board hardware driver files.
- *
- * This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from
- * the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of
- * hardware placed on supported boards.
- *
- * \dir CodeTemplates
- * \brief Code templates for use in LUFA powered applications.
- *
- * This contains code templates for board drivers, sample LUFA project makefiles and other similar templates that can be copied into
- * a LUFA powered application and modified to speed up development.
- *
- * \dir CodeTemplates/DriverStubs
- * \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate.
- *
- * This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those
- * directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files
- * copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board,
- * the corresponding LUFA board APIs will work correctly with the non-standard board hardware.
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Donating.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Donating.txt deleted file mode 100644 index 7e947c2a2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Donating.txt +++ /dev/null @@ -1,24 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/**
- * \page Page_Donating Donating to Support This Project
- *
- * \image html Images/Author.jpg "Dean Camera, LUFA Developer"
- *
- * I am a 23 year old Atmel Applications Engineer, living in Trondheim, Norway and working on LUFA in my spare time.
- * The development and support of this library requires much effort from myself, as I am the sole developer, maintainer
- * and supporter. Please consider donating a small amount to support this and my future Open Source projects - All
- * donations are <i>greatly</i> appreciated.
- *
- * Note that commercial entities can remove the attribution portion of the LUFA license by a one-time fee - see
- * \ref Page_LicenseInfo for more details (<b>Note: Please do NOT pay this in advance through the donation link below -
- * contact author for payment details.</b>).
- *
- * \image html "http://www.pledgie.com/campaigns/6927.png?skin_name=chrome"
- * <a href='http://www.lufa-lib.org/donate'>Donate to this project via PayPal</a> - Thanks in Advance!
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ExportingLibrary.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ExportingLibrary.txt deleted file mode 100644 index 65d7fc923..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ExportingLibrary.txt +++ /dev/null @@ -1,106 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_ExportingLibrary Exporting the Library for IDE Use
- *
- * While LUFA was designed to allow for easy compilation in a makefile driven environment,
- * it is possible to export the library into a form suitable for drop-in use inside of an
- * IDE.
- *
- * \section Sec_LibraryExport Exporting the Library
- * An export of the library is at its most basic, a direct copy of the main "LUFA" source folder from the
- * root download folder; this contains the library core which can be re-used within external projects.
- * However, as many IDEs attempt to automatically compile all included source files, it is neccesary to
- * exclude some directories and files from the library core export to allow for easier integration into
- * an IDE project.
- *
- * \subsection SSec_ManualExport Manual Export
- * To manually export the library core, copy over the main LUFA library folder from the LUFA root directory,
- * renaming as desired. Within the library core folder, the following directories should be removed or
- * excluded from your IDE import:
- * - Documentation/
- * - DoxygenPages/
- * - CodeTemplates/
- *
- * If required, files from the CodeTemplates/ subdirectory may be copied to your IDE project as needed.
- *
- * The resulting copy of the library may then be imported into your chosen IDE according to the instructions
- * shown in \ref Sec_LibraryImport.
- *
- * \subsection SSec_AutomaticExport Automatic Export
- * If desired, the steps indicated in \ref SSec_ManualExport may be automatically performed, by running the
- * command <b><code>make export_tar</code></b> from the command line. This will generate two .tar files in the
- * current directory, named <code>LUFA_YYMMDD.tar</code> and <code>LUFA_YYMMDD_Code_Templates.tar</code> (where
- * "YYMMDD" is the version of the library being exported). The first archive contains the exported LUFA core
- * with the non-required files removed, while the second contains an archived copy of the code template files
- * for the current LUFA version.
- *
- * The resulting archived copy of the library may then be extracted to your chosen IDE project source directory
- * and imported according to the instructions shown in \ref Sec_LibraryImport.
- *
- * \section Sec_LibraryImport Importing the Library
- * An exported copy of the library may be imported wholesale into an IDE project, if the instructions detailed
- * in \ref Sec_LibraryExport are followed.
- *
- * Specific instructions for importing an exported version of LUFA into various IDEs are listed below.
- *
- * \subsection SSec_AS56_Import Importing into AVRStudio 5/Atmel Studio 6
- * To import LUFA into a new or existing project, the following steps must be followed.
- *
- * \subsubsection SSSec_AS56_Import_Step1 Copy over the exported library
- * Copy over the exported library archive created via the steps listed in \ref Sec_LibraryExport to your AS5/AS6
- * project directory.
- *
- * \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step1.png
- *
- * \subsubsection SSSec_AS56_Import_Step2 Extract exported library
- * Extract out the contents of the archive to a new folder. This may be any name you wish, however keep in mind
- * that this name will need to be referenced within your user application under most circumstances. It is
- * suggested that this folder be named "LUFA", or "LUFA" followed by the version string for easy reference.
- *
- * \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step2.png
- *
- * \subsubsection SSSec_AS56_Import_Step3 Add the library files
- * Open your AVRStudio 5/Atmel Studio 6 project. From the "Solution Explorer" pane, click the "Show All Files"
- * button on the toolbar to display ghosted icons of files and folders located in the project source directory
- * that are not currently added to the project.
- *
- * \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step3.png
- *
- * Right-click the ghosted version of the extracted LUFA export folder in the Solution Explorer pane, and
- * choose the "Add to Project" option from the context menu. This will add the entire LUFA source tree to the
- * current project.
- *
- * \subsubsection SSSec_AS56_Import_Step4 Open Project Toolchain Properties
- * In the Solution Explorer pane, click the project node, and press the "Properties" button in the toolbar to
- * open the Project Properties window. This window allows you to configure the various project global compiler,
- * assembler and linker options.
- *
- * \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step4.png
- *
- * Click the "Toolchain" tab on the left side of the Project Properties window.
- *
- * \subsubsection SSSec_AS56_Import_Step5 Configure Project Toolchain Properties
- *
- * In the GNU C Compiler section, open the "Symbols" page. Click the "Add Item" button to the top-right of the
- * "Defined Symbols" section to add new symbols.
- *
- * At a minimum, you will need to define the following symbols (for more information on these symbols, see
- * \ref Page_ConfiguringApps):
- * - ARCH
- * - F_CPU
- * - F_USB
- * - BOARD
- * \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step5_1.png
- *
- * Next, open the GNU C Compiler section's "Optimization" page. Ensure that the option to prepare functions for
- * garbage collection is enabled.
- * \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step5_2.png
- *
- * Finally, in the GNU C Linker section, open the "Optimization" page. Ensure that the option to garbage collect
- * unused sections is selected.
- * \image html Images/AS5_AS6_Import/AS5_AS6_Import_Step5_3.png
- */
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/FutureChanges.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/FutureChanges.txt deleted file mode 100644 index 9660a473a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/FutureChanges.txt +++ /dev/null @@ -1,49 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
- /** \page Page_FutureChanges Future Changes
- *
- * Below is a list of future changes which are proposed for the LUFA library, but not yet started/complete.
- * This gives an unordered list of future changes which may be available in future releases of the library.
- * If you have an item to add to this list, please contact the library author via email, the LUFA mailing list,
- * or post your suggestion as an enhancement request to the project bug tracker.
- *
- * <b>Targeted for Future Releases:</b>
- * - Code Features
- * -# Add hub support when in Host mode for multiple devices
- * -# Investigate virtual hubs when in device mode instead of composite devices
- * -# Re-add interrupt Pipe/Endpoint support
- * -# Update stream APIs to use DMA transfers on supported architectures
- * -# Pull out third party libraries into a separate folder and reference them as required
- * -# Add a LUFA_YIELD macro for integration into a third-party RTOS
- * -# Abstract out Mass Storage byte send/receive to prevent low level API use in projects
- * -# Fix HID report parser usage support for array types
- * -# Make HOST_DEVICE_SETTLE_DELAY_MS a global variable that can be changed
- * -# Add MANDATORY_EVENT_FUNCTIONS compile time option
- * -# Add watchdog support to the library and apps/bootloaders
- * - Testing/Verification
- * -# Re-run USBIF test suite on all classes to formally verify operation
- * -# Implement automated functional testing of all demos
- * - Documentation/Support
- * -# Add detailed overviews of how each demo works
- * -# Add board overviews
- * -# Write LUFA tutorials
- * - Demos/Projects
- * -# Device/Host USB bridge
- * -# Finish incomplete demos and projects
- * -# Add class driver support for Test and Measurement class
- * -# Add class driver support for EEM class
- * -# Add class driver support for ECM class
- * -# Add class driver generic HID report host demo
- * -# Implement flow control for USB to Serial project
- * - Ports
- * -# Port all demos to multiple architectures
- * -# Finish USB XMEGA port
- * -# Add AVR32 UC3C, UC3D and UC3L support
- * -# Atmel ARM7 series microcontrollers
- * -# Other (commercial) C compilers
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/GettingStarted.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/GettingStarted.txt deleted file mode 100644 index b62a7cae1..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/GettingStarted.txt +++ /dev/null @@ -1,25 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_GettingStarted Getting Started
- *
- * Out of the box, LUFA contains a large number of pre-made class demos for you to test, experiment with and
- * ultimately build upon for your own projects. All the demos (where possible) come pre-configured to build and
- * run correctly on the AT90USB1287 AVR microcontroller, mounted on the Atmel USBKEY board and running at an 8MHz
- * master clock. This is due to two reasons; one, it is the hardware the author possesses, and two, it is the most
- * popular Atmel USB demonstration board to date. To learn how to reconfigure, recompile and program the included
- * LUFA applications using different settings, see the subsections below.
- *
- * Most of the included demos in the /Demos/ folder come in both ClassDriver and LowLevel varieties. If you are new
- * to LUFA, it is highly recommended that you look at the ClassDriver versions first, which use the pre-made USB
- * Class Drivers (\ref Group_USBClassDrivers) to simplify the use of the standard USB classes in user applications.
- *
- * <b>Subsections:</b>
- * \li \subpage Page_ConfiguringApps - How to Configure the Included Demos, Projects and Bootloaders
- * \li \subpage Page_CompilingApps - How to Compile the Included Demos, Projects and Bootloaders
- * \li \subpage Page_ProgrammingApps - How to Program an AVR with the Included Demos, Projects and Bootloaders
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Groups.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Groups.txt deleted file mode 100644 index 3a3509d3f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Groups.txt +++ /dev/null @@ -1,38 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \defgroup Group_BoardDrivers Board Drivers
- *
- * Functions, macros, variables, enums and types related to the control of physical board hardware.
- */
-
-/** \defgroup Group_PeripheralDrivers On-chip Peripheral Drivers
- *
- * Functions, macros, variables, enums and types related to the control of AVR subsystems.
- */
-
-/** \defgroup Group_MiscDrivers Miscellaneous Drivers
- *
- * Miscellaneous driver Functions, macros, variables, enums and types.
- */
-
-/** \defgroup Group_PlatformDrivers_AVR8 AVR8
- * \ingroup Group_PlatformDrivers
- *
- * Drivers relating to the AVR8 architecture platform, such as clock setup and interrupt management.
- */
-
-/** \defgroup Group_PlatformDrivers_XMEGA XMEGA
- * \ingroup Group_PlatformDrivers
- *
- * Drivers relating to the XMEGA architecture platform, such as clock setup and interrupt management.
- */
-
-/** \defgroup Group_PlatformDrivers_UC3 UC3
- * \ingroup Group_PlatformDrivers
- *
- * Drivers relating to the UC3 architecture platform, such as clock setup and interrupt management.
- */
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step1.png b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step1.png Binary files differdeleted file mode 100644 index 4f0c26f37..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step1.png +++ /dev/null diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step2.png b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step2.png Binary files differdeleted file mode 100644 index 6e309ae41..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step2.png +++ /dev/null diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step3.png b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step3.png Binary files differdeleted file mode 100644 index 8192c9ae8..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step3.png +++ /dev/null diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step4.png b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step4.png Binary files differdeleted file mode 100644 index 2bb8f5fc8..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step4.png +++ /dev/null diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_1.png b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_1.png Binary files differdeleted file mode 100644 index f3a49ba9c..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_1.png +++ /dev/null diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_2.png b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_2.png Binary files differdeleted file mode 100644 index 078f4ec8d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_2.png +++ /dev/null diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_3.png b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_3.png Binary files differdeleted file mode 100644 index 8a8571bd8..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/AS5_AS6_Import/AS5_AS6_Import_Step5_3.png +++ /dev/null diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/Author.jpg b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/Author.jpg Binary files differdeleted file mode 100644 index e8f5541a0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/Author.jpg +++ /dev/null diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/LUFA.png b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/LUFA.png Binary files differdeleted file mode 100644 index 54fa1a664..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/LUFA.png +++ /dev/null diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/LUFA_thumb.png b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/LUFA_thumb.png Binary files differdeleted file mode 100644 index efa538677..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Images/LUFA_thumb.png +++ /dev/null diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/KnownIssues.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/KnownIssues.txt deleted file mode 100644 index 0d63a03d0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/KnownIssues.txt +++ /dev/null @@ -1,44 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
- /** \page Page_KnownIssues Known Issues
- * The following are known issues present in each official LUFA release. This list should contain all known
- * issues in the library. Most of these issues should be corrected in the future release - see
- * \ref Page_FutureChanges for a list of planned changes in future releases.
- *
- * \section Sec_KnownIssues120730 Version 120730
- * - AVR8 Architecture
- * - No known issues.
- * - UC3 Architecture
- * \warning The UC3 device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only. \n
- *
- * - No demos, bootloaders or projects have been ported for the UC3 devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - DMA transfers to and from the USB controller are not yet implemented for this release.
- * - The UC3C, UC3D and UC3L sub-families of UC3 are not currently supported by the library due to their
- * altered USB controller design.
- * - The various \c CreateStream() functions for creating standard \c <stdio.h> compatible virtual file
- * streams are not available on the UC3 architecture, due to a lack of suitable library support.
- * - XMEGA Architecture
- * \warning The XMEGA device support is currently <b>experimental</b> (incomplete and/or non-functional), and is included for preview purposes only.
- *
- * - No demos, bootloaders or projects have been ported for the XMEGA devices in the current release,
- * although the architecture is supported in the LUFA core library.
- * - Endpoints of more than 64 bytes are not currently supported in this release.
- * - Isochronous endpoints are not currently supported in this release. As a result, the audio class
- * cannot be used on XMEGA devices.
- * - Multiple-bank endpoints are not currently supported in this release.
- * - Early revisions of the ATXMEGA128A1U are incompatible with LUFA, due to their various errata
- * relating to the USB controller.
- * - Architecture Independent
- * - The HID parser fails for array type elements that have a MIN and MAX usage applied; each element
- * in the array will receive a unique incrementing usage from the MIN value, up to MAX.
- * - The LUFA library is not watchdog aware, and thus timeouts are possible if short periods are used
- * and a lengthy USB operation is initiated.
- * - Build System
- * - No known issues.
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/LUFAPoweredProjects.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/LUFAPoweredProjects.txt deleted file mode 100644 index c3bf3db9d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/LUFAPoweredProjects.txt +++ /dev/null @@ -1,181 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_LUFAPoweredProjects User Projects Powered by LUFA
- *
- * LUFA is currently in use all around the world, in many applications both commercial and non-commercial. Below is a
- * list of known public LUFA powered projects, which all use the LUFA library in some way. Feel free to visit each project's
- * home page for more information on each project.
- *
- * If you have a project that you would like to add to this list, please contact me via the details on the main page of this
- * documentation.
- *
- * \section Sec_BoardsUsingLUFA AVR-USB Development Boards Using LUFA
- *
- * The following is a list of known AVR USB development boards, which recommend using LUFA for the USB stack. Some of these
- * are open design, and all are available for purchase as completed development boards suitable for project development.
- *
- * \li AVR-USB-162, a USBKEY-like development board for the AT90USB162: http://olimex.com/dev/avr-usb-162.html
- * \li Benito #7, a no-frills USB board: http://www.dorkbotpdx.org/wiki/benito
- * \li Duce, the sucessor to the Benito #7: http://dorkbotpdx.org/wiki/duce
- * \li JM-DB-U2, an ATMEGA32U2 development board: http://u2.mattair.net/index.html
- * \li Micropendous, an open design/source set of AVR USB development boards: http://micropendous.org/
- * \li Microsin AVR-USB162 breakout board, a DIY AT90USB162 development board: http://microsin.ru/content/view/685/44/
- * \li Minimus USB, a board specially designed for PSGroove: http://www.minimususb.com/
- * \li Nanduino, a do-it-yourself AT90USB162 board: http://www.makestuff.eu/wordpress/?page_id=569
- * \li Sparkfun ATMEGA8U2 breakout board: http://www.sparkfun.com/products/10277
- * \li Teensy and Teensy++, two other AVR USB development boards: http://www.pjrc.com/teensy/index.html
- * \li U2DIL/U4DIL, a set of DIP layout USB AVR boards: http://www.reworld.eu/re/en/products/u2dil/
- * \li USB2AX, a tiny USB to serial converter board: http://paranoidstudio.assembla.com/wiki/show/paranoidstudio/USB2AX
- * \li USBFOO 2, AT90USB162 based development board: http://shop.kernelconcepts.de/product_info.php?products_id=102
- *
- * \section Sec_LUFAProjects Projects Using LUFA (Hobbyist)
- *
- * The following are known hobbyist projects using LUFA. Most are open source, and show off interesting ways that the LUFA library
- * can be incorporated into many different applications.
- *
- * \li Accelerometer Game Joystick: http://www.crictor.co.il/he/episodes/joystick/
- * \li Arcade Controller: http://fletchtronics.net/arcade-controller-made-petunia
- * \li Arcade Joystick: http://jamie.lentin.co.uk/embedded/arcade-joystick/
- * \li AttoBasic AVR BASIC interpreter: http://www.cappels.org/dproj/AttoBasic2_1/AttoBasic_2.1_with_USB_and_Arduino_support.html
- * \li AVR USB Modem, a 3G Wireless Modem host: http://code.google.com/p/avrusbmodem/
- * \li Bicycle POV: http://www.code.google.com/p/bicycleledpov/
- * \li Bluetooth Explorerbot: http://code.google.com/p/bluetooth-explorerbot/
- * \li Bus Ninja, an AVR clone of the popular BusPirate project: http://blog.hodgepig.org/busninja/
- * \li CAMTRIG, a remote Camera Trigger device: http://code.astraw.com/projects/motmot/camtrig
- * \li CD Driver Emulator Dongle for ISO Files: http://cdemu.blogspot.com/
- * \li ClockTamer, a configurable clock generator: http://code.google.com/p/clock-tamer/
- * \li Collection of alternative Arduino Uno firmwares: http://hunt.net.nz/users/darran/
- * \li Computer controlled LED matrix (Russian): http://we.easyelectronics.ru/AVR/nebolshoy-primer-s-lufa-hidapi.html
- * \li CULFW, a 868MHz RF packet encoder/decoder: http://www.koeniglich.de/culfw/culfw.html
- * \li Dashkey, a custom PC keyboard controller: http://geekhack.org/showwiki.php?title=Island:19096
- * \li DIY PS3 controller emulator: https://code.google.com/p/diyps3controller/
- * \li EMuSer, a USB-RS422 adapter for E-Mu samplers: http://www.emxp.net/EMuSer.htm
- * \li Estick JTAG, an ARM JTAG debugger: http://code.google.com/p/estick-jtag/
- * \li "Fingerlicking Wingdinger" (WARNING: Bad language if no Javascript), a MIDI controller: http://noisybox.net/electronics/wingdinger/
- * \li Flyatar, a real-time fly tracking system: https://github.com/peterpolidoro/Flyatar
- * \li FootJoy, a 22 button, 6-axis josystick with keyboard and mouse modes: https://bitbucket.org/sirbrialliance/foot-joy/
- * \li Gamecube controller to USB adapter: https://www.facebook.com/media/set/?set=a.10150202447076304.310536.688776303&l=df53851c50
- * \li Garmin GPS USB to NMEA standard serial sentence translator: http://github.com/nall/garmin-transmogrifier/tree/master
- * \li Generic HID Device Creator: http://generichid.sourceforge.net/
- * \li Generic HID Open Source Framework: http://www.waitingforfriday.com/index.php/USB_Generic_HID_Open_Source_Framework_for_Atmel_AVR_and_Windows
- * \li Ghetto Drum, a MIDI drum controller: http://noisybox.net/art/gdrum/
- * \li GPS enabled lap timer for vehicles: http://www.assembla.com/code/ironlung/subversion/nodes/trunk/LapTimer
- * \li Hardware Volume Control: https://github.com/davidk/hw-volume-control
- * \li Hiduino, a USB-MIDI replacement firmware for the Arduino Uno: http://code.google.com/p/hiduino/
- * \li Ikea RGB LED USB modification: http://slashhome.se/p/projects/id/ikea_dioder_usb/#project
- * \li IR Remote to Keyboard decoder: http://netzhansa.blogspot.com/2010/04/our-living-room-hi-fi-setup-needs-mp3.html
- * \li Jukebox panic button: http://thinkl33t.co.uk/the-panic-button
- * \li LED Panel controller: http://projects.peterpolidoro.net/caltech/panelscontroller/panelscontroller.htm
- * \li Linux Secure Storage Dongle: http://github.com/TomMD/teensy
- * \li LUFA powered DDR dance mat (French): http://logicien-parfait.fr/dokuwiki/doku.php?id=projet:ddr_repair
- * \li MakeTV Episode Dispenser: http://www.youtube.com/watch?v=BkWUi18hl3g
- * \li MidiMonster, a USB-to-MIDI gateway board: http://www.dorkbotpdx.org/wiki/midimonster
- * \li MIDI Theremin: http://baldwisdom.com/usb-midi-controller-theremin-style-on-arduino-uno/
- * \li MIDI interface hack of a toy Guitar: http://blog.x37v.info/2011/06/26/toy-guitar-hacked-midi-conroller
- * \li MiniBloq, a graphical Ardunio programming environment : http://minibloq.org/
- * \li MiXley, a port of the Teacup 3D printer firmware for the USB AVRs: http://codaset.com/michielh/mixley
- * \li Mobo 4.3, a USB controlled all band (160-10m) HF SDR transceiver: http://sites.google.com/site/lofturj/mobo4_3
- * \li Moco, a native Arduino Uno MIDI replacement firmware: http://web.mac.com/kuwatay/morecat_lab./MocoLUFA.html
- * \li Motherboard BIOS flasher: http://www.coreboot.org/InSystemFlasher
- * \li Multi-button Joystick (French): http://logicien-parfait.fr/dokuwiki/doku.php?id=projet:joystick
- * \li Music Playing Alarm Clock (Tutorial): http://www.instructables.com/id/Music-Playing-Alarm-Clock/
- * \li Nehebkau, Laptop Controlled Keyboard and Mouse: http://www.frank-zhao.com/cache/nehebkau.php
- * \li NeroJTAG, a JTAG dongle: https://github.com/makestuff/neroJtag
- * \li NES Controller USB modification: http://projects.peterpolidoro.net/video/NESUSB.htm
- * \li Nikon wireless camera remote control (Norwegian): http://hekta.org/~hpe1119/
- * \li Opendous-JTAG, an open source ARM JTAG debugger: http://code.google.com/p/opendous-jtag/
- * \li Openkubus, an open source hardware-based authentication dongle: http://code.google.com/p/openkubus/
- * \li Orbee, a USB connected RGB Orb for notifications: http://www.franksworkshop.com.au/Electronics/Orbee/Orbee.htm
- * \li PPM signal generator over USB: https://github.com/G33KatWork/USBPPM
- * \li Programmable keyboard controller: http://41j.com/blog/2011/10/a-programmable-keyboard-controller/
- * \li Programmable XBOX controller: http://richard-burke.dyndns.org/wordpress/pan-galactic-gargantuan-gargle-brain-aka-xbox-360-usb-controller/
- * \li PSGroove, a Playstation 3 Homebrew dongle: http://github.com/psgroove
- * \li PS/2 to USB adapter: https://github.com/makestuff/p2ukbd
- * \li Reprap with LUFA, a LUFA powered 3D printer: http://code.google.com/p/at90usb1287-code-for-arduino-and-eclipse/
- * \li RFPirate, a RF experimentation platform: https://github.com/ebuller/RF-Pirate
- * \li RF Transciever using the MRF49XA: http://alternet.us.com/?page_id=1494
- * \li SD Card reader: http://elasticsheep.com/2010/04/teensy2-usb-mass-storage-with-an-sd-card/
- * \li SDR1, a Software Defined Radio firmware: https://code.google.com/p/sdr-mk1/
- * \li SEGA Megadrive/Genesis Development Cartridge: http://www.makestuff.eu/wordpress/?page_id=398
- * \li Serial Line bus analyser: http://www.pjrc.com/teensy/projects/SerialAnalyzer.html
- * \li SNES custom FLASH ROM: http://electrifiedfoolingmachine.co/?page_id=633
- * \li Smartcard Detective: https://code.google.com/p/smartcarddetective/
- * \li SmartportVHD Apple II Mass Storage adapter: http://pcedric3.free.fr/SmartportVHD/
- * \li Single LED Matrix Display: http://guysoft.wordpress.com/2009/10/08/bumble-b/
- * \li Simple USB LED Controller: https://github.com/scottbez1/sulc
- * \li Stripe Snoop, a Magnetic Card reader: http://www.ossguy.com/ss_usb/
- * \li Stylophone, with USB MIDI connectivity: http://www.waitingforfriday.com/index.php/Stylophone_Studio_5
- * \li Teensy SD Card .WAV file player: http://elasticsheep.com/2010/04/teensy2-usb-wav-player-part-1/
- * \li Touchscreen Input Device: http://capnstech.blogspot.com/2010/07/touchscreen-update.html
- * \li UDFS, a BBC Micro USB disk filing system: https://github.com/makestuff/udfs
- * \li Universal USB AVR Module: http://usbavr.bplaced.net/
- * \li USB2AX, a USB to Dynamixel network adapter: http://paranoidstudio.assembla.com/wiki/show/paranoidstudio/USB2AX
- * \li USB Infrared Receiver/Transmitter: http://vaton4.web2001.cz/
- * \li USB Interface for Playstation Portable Devices: http://forums.ps2dev.org/viewtopic.php?t=11001
- * \li USB MIDI to DMX controller: http://github.com/hanshuebner/miDiMX
- * \li USB powered Geiger Counter: http://uhrheber.wordpress.com/2011/04/28/a-usb-powered-geiger-counter-for-the-z2-and-other-computers/
- * \li Userial, a USB to Serial converter with SPI, I2C and other protocols: http://www.tty1.net/userial/
- * \li Wireless MIDI Guitar system: http://www.ise.pw.edu.pl/~wzab/wireless_guitar_system/
- * \li Xnormidi, a C MIDI library: http://x37v.info/projects/xnormidi
- * \li XUM1541, a Commodore 64 floppy drive to USB adapter: http://www.root.org/~nate/c64/xum1541/
- * \li Zeus, a touch screen computer for music manipulation: http://www.benbengler.com/developments_zeus.html
- *
- * \section Sec_LUFACommercialProjects Projects Using LUFA (Commercial)
- *
- * The following is a list of known commercial products using LUFA. Some of these are open source, although many are "black-box"
- * solutions with no source code given. Those companies which have purchased a Commercial License to LUFA (see \ref Page_LicenseInfo)
- * are not listed here unless specifically requested.
- *
- * \li Arduino Uno, the official Arduino board: http://www.arduino.cc
- * \li ARPS Locator: http://la3t.hamradio.no/lab//?id=tracker_en
- * \li AsTeRICS assistive technologies project, HID actuator: http://www.asterics.eu
- * \li Ceberus, a MadCatz Xbox 360 arcade stick modifier: http://www.phreakmods.com/products/cerberus
- * \li CFFA3000, a CompactFlash interface for the Apple II: http://www.dreher.net/CFforAppleII
- * \li Digital Survey Instruments Magnetometer and Pointer: http://www.digitalsurveyinstruments.com/
- * \li FinchRobot, a robot designed for educational use: http://www.finchrobot.com/
- * \li HummingBird Kit, a robotics learning platform: http://www.hummingbirdkit.com/
- * \li Penguino, an Arduino Board With On-Board LUFA Powered Debugger/Programmer: http://wiki.icy.com.au/PenguinoAVR
- * \li PIR-1, an IR control interface for consumer electronics: http://www.promixis.com/pir-1.php
- * \li PIR-4, a USB Connected 4 port IR transmitter: http://promixis.com/pir-4.php
- * \li KeyGlove, an alternative input system: http://www.keyglove.net/
- * \li Many of Busware's Products: http://www.busware.de/
- * \li MIDIFighter, a USB-MIDI controller: http://www.midifighter.com/
- * \li Norduino, a wireless Arduino: http://norduino.robomotic.com/norduino-is-now-usb-hid/
- * \li Olimex AVR-ISP-MK2, an AVRISP-MKII Clone AVR Programmer: https://www.olimex.com/dev/avr-isp-mk2.html
- * \li Retrode, a USB Games Console Cartridge Reader: http://www.retrode.org
- * \li RFI21.1EU UHF RFID reader: http://www.metra.cz/rfid/uhf-rfid-ctecky/rfi21-1eu-uhf-rfid-ctecka.htm
- * \li SmartCardDetective, a Smart Card analysis tool: http://www.smartcarddetective.com/
- * \li USBTINY-MKII, an AVRISP-MKII Clone AVR Programmer: http://tom-itx.dyndns.org:81/~webpage/boards/USBTiny_Mkii/USBTiny_Mkii_index.php
- * \li UDS18B20 USB Temperature sensor: http://toughlog.org/uds18b20/
- * \li VMeter, a USB MIDI touch strip controller: http://www.vmeter.net/
- * \li XMEGA Development Board, using LUFA as an On-Board Programmer: http://xmega.mattair.net/
- * \li Zeptoprog, a multifunction AVR programmer: http://www.mattairtech.com/index.php/featured/zeptoprog.html
- *
- * \section Sec_LUFAPublications Publications Mentioning LUFA
- * The following are published magazines which have either mentioned or featured the LUFA library.
- *
- * \li Elektor Magazine, "My First AVR-USB" by Antoine Authier (feature), January 2010 Issue
- * \li Elektor Magazine, "USB is Cool/Sucks" by Jerry Jacobs and Chris Vossen (minor mention), January 2010 Issue
- * \li Elektor Magazine, "20 x Open Source" by Jens Nickel, March 2010 Issue
- * \li Circuit Cellar Magazine, "Advanced USB Design Debugging" by Collin O'Flynn, August 2010 Issue
- *
- * \section Sec_LUFANotableMentions Other Notable Mentions of LUFA
- * The following are non-magazine but notable mentions of the LUFA library.
- *
- * \li Adafruit "Ask an Engineer", 7th November 2010
- * \li Arduino 2010 Keynote speech
- * \li The Amp Hour podcast blog #11
- * \li Blackhat 2011 conference, "Exploiting USB Devices with Arduino"
- *
- * \section Sec_PortsAndForks Non-Official LUFA Ports and Forks
- * The following are unofficial forks of the LUFA codebase, which implement different features such as support for
- * additional architectures.
- *
- * \li NXP's official "nxpusblib" LUFA fork, for LPC devices: http://www.lpcware.com/content/project/nxpusblib
- * \li Kevin Mehall's LUFA port to the NXP LPC13xx: https://github.com/kevinmehall/LUFA-LPC13xx
- *
- */
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/LibraryResources.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/LibraryResources.txt deleted file mode 100644 index a85d59c16..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/LibraryResources.txt +++ /dev/null @@ -1,34 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/**
- * \page Page_Resources Library Resources
- *
- * \section Sec_UnofficialResources Unofficial Resources
- * Unofficial Russian LUFA documentation translation: http://microsin.ru/Download.cnt/doc/LUFA/ \n
- * Tutorial for LUFA USB Control Transfers: http://www.avrbeginners.net/new/tutorials/usb-control-transfers-with-lufa/
- *
- * \section Sec_ProjectPages LUFA Related Webpages
- * Project Homepage: http://www.lufa-lib.org \n
- * Commercial Licenses: http://www.lufa-lib.org/license \n
- * Author's Website: http://www.fourwalledcubicle.com \n
- * Development Blog: http://www.fourwalledcubicle.com/blog \n
- *
- * \section Sec_ProjectHelp Assistance With LUFA
- * Support Mailing List: http://www.lufa-lib.org/support \n
- * Author's Email: dean [at] fourwalledcubicle [dot] com \n
- *
- * \section Sec_InDevelopment Latest In-Development Source Code
- * Issue Tracker: http://www.lufa-lib.org/tracker \n
- * Public SVN Repository: http://www.lufa-lib.org/svn \n
- * Public GIT Repository: http://www.lufa-lib.org/git \n
- * Latest Repository Source Archive: http://www.lufa-lib.org/latest-archive \n
- * Commit RSS Feed: http://www.lufa-lib.org/rss \n
- *
- * \section Sec_USBResources USB Resources
- * USB-IF Website: http://www.usb.org \n
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/LicenseInfo.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/LicenseInfo.txt deleted file mode 100644 index 091ce9431..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/LicenseInfo.txt +++ /dev/null @@ -1,22 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/**
- * \page Page_LicenseInfo Source Code License
- *
- * The LUFA library is currently released under the MIT license, included below.
- *
- * Commercial entities can opt out of the public disclosure clause in this license
- * for a one-time US$1500 payment. This provides a non-exclusive modified MIT licensed which
- * allows for the free use of the LUFA library, bootloaders and (where the sole copyright
- * is attributed to Dean Camera) demos without public disclosure within an organization, in
- * addition to three free hours of consultation with the library author, and priority support.
- * Please visit the Commercial License link on \ref Page_Resources for more information on
- * ordering a commercial license for your company.
- *
- * \verbinclude License.txt
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/MainPage.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/MainPage.txt deleted file mode 100644 index ce351ad3e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/MainPage.txt +++ /dev/null @@ -1,52 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/**
- * \mainpage
- *
- * \image html Images/LUFA.png
- * <div align="center"><small><i>Logo design by <a href="http://www.studiomonsoon.com">Studio Monsoon Photography</a></i></small></div>
- * \n
- * <div align="center"><a href="http://www.lufa-lib.org">http://www.lufa-lib.org</a></div>
- * \n
- *
- * <b>LUFA is donationware. For author and donation information, see \ref Page_Donating.</b>
- *
- * LUFA is an open-source USB library for the USB-enabled AVR microcontrollers, released under the MIT license (see \ref Page_LicenseInfo).
- * It supports a large number of USB AVR models and boards (see \ref Page_DeviceSupport). It is designed to provide an easy to use,
- * feature rich framework for the development of USB peripherals and hosts.
- *
- * LUFA focuses on the microcontroller side of USB development only; it includes no PC host USB driver development facilities - other projects
- * such as the Windows Driver Development Kit, Windows USB Device Mode Framework and libusb may be of interest for developing custom OS drivers.
- * While custom USB devices can be made with LUFA using such tools, the included demos all use the inbuilt OS drivers for each USB class for
- * simplicity.
- *
- * The library is currently in a stable release, suitable for download and incorporation into user projects for
- * both host and device modes. For information about the project progression, see the blog link at \ref Page_Resources.
- *
- * LUFA is written specifically for the free AVR-GCC compiler, and uses several GCC-only extensions to make the
- * library API more streamlined and robust. You can download AVR-GCC for free in a convenient windows package,
- * from the the WinAVR website (see \ref Page_Resources).
- *
- * The only required AVR peripherals for LUFA is the USB controller itself and interrupts - LUFA does not require the use of the
- * microcontroller's timers or other hardware, leaving more hardware to the application developer.
- *
- * Accompanying LUFA in the download package is a set of example demo applications, plus several Bootloaders of different classes
- * and open source LUFA powered projects.
- *
- * <b>Subsections:</b>
- * \li \subpage Page_LicenseInfo - Project source license and commercial use information
- * \li \subpage Page_Donating - Donating to support this project
- * \li \subpage Page_DeviceSupport - Current Device and Hardware Support
- * \li \subpage Page_ChangeLog - Project Changelog
- * \li \subpage Page_KnownIssues - Known Issues
- * \li \subpage Page_FutureChanges - Planned Changes to the Library
- * \li \subpage Page_GettingStarted - Getting started with LUFA
- * \li \subpage Page_DevelopingWithLUFA - Developing with LUFA
- * \li \subpage Page_LUFAPoweredProjects - Other Projects Using LUFA
- * \li \subpage Page_Resources - LUFA and USB Related Resources
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/MigrationInformation.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/MigrationInformation.txt deleted file mode 100644 index 7a08ad23c..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/MigrationInformation.txt +++ /dev/null @@ -1,674 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_Migration Migrating from Older Versions
- *
- * Below is migration information for updating existing projects based on previous versions of the LUFA library
- * to the next version released. It does not indicate all new additions to the library in each version change, only
- * areas relevant to making older projects compatible with the API changes of each new release.
- *
- * \section Sec_Migration120730 Migrating from 120219 to 120730
- * <b>Device Mode</b>
- * - The device mode Audio Class driver now requires an additional configuration parameter, the Audio Control interface index. Existing applications should
- * be adjusted to specify the additional configuration parameter.
- * - The HID_DESCRIPTOR_JOYSTICK() macro no longer takes a variable number of axis as a parameter, due to OS incompatibilities; this macro now uses a fixed
- * 3 axis of data. User applications should update their calls to this macro and their report structures to suit a fixed 3-axis joystick report. If a user
- * application requires more than 3 axis' of data, a custom report descriptor will need to be constructed by hand.
- * - The \ref Endpoint_ConfigureEndpoint() function no longer takes in masks for the banks and direction; the number of banks is now an integer argument, and
- * the direction is obtained from the full endpoint address within the device. Applications calling Endpoint_ConfigureEndpoint() should update their API
- * call to use a full endpoint address (including ENDPOINT_DIR_IN or ENDPOINT_DIR_OUT direction in the MSB of the endpoint address) and an integer number
- * of banks.
- * - All endpoint functions now operate on full endpoint addresses within the device, rather than a directionless endpoint index. Applications should update
- * their API calls to use full endpoint addresses when required within the device.
- * - All device mode class drivers have been updated to use a new unified endpoint description structure for all endpoints; existing applications will need
- * to update their class driver struct instantiation to match the new scheme (see \ref USB_Endpoint_Table_t).
- * - The \c ENDPOINT_BANKS_SUPPORTED() and \c ENDPOINT_MAX_ENDPOINT_SIZE() macros have been removed, as these do not function correctly with the new addressing
- * scheme for the endpoint APIs. Please refer to the target device's datasheet for the maximum bank size of each endpoint.
- * - The MIDI class driver \ref MIDI_EventPacket_t event packet no longer contains seperate \c CableIndex and \c Command entries; these have been combined
- * into a single \c Event element which can be contructed using the new macro \ref MIDI_EVENT(). Existing applications should use the new macro and structure
- * element name.
- *
- * <b>Host Mode</b>
- * - The Android Accessory Host class driver property strings are now a array of \c char* rather than a struct of named pointers. Existing applications
- * should use C99 Designated Initializers with the property string indexes located in \ref AOA_Strings_t instead.
- * - The \ref Pipe_ConfigurePipe() function no longer takes in masks for the banks and token; the number of banks is now an integer argument, and the token
- * is now inferred from the full pipe address within the device, and the pipe type. Applications calling Pipe_ConfigurePipe() should update their API
- * call to use a full pipe address (including PIPE_DIR_IN or PIPE_DIR_OUT direction in the MSB of the pipe address) and an integer number of banks.
- * - All pipe functions now operate on full pipe addresses within the device, rather than a directionless pipe index. Applications should update their API
- * calls to use full pipe addresses when required within the device.
- * - All host mode class drivers have been updated to use a new unified pipe description structure for all pipes; existing applications will need to update
- * their class driver struct instantiation to match the new scheme (see \ref USB_Pipe_Table_t).
- * - The MIDI class driver \ref MIDI_EventPacket_t event packet no longer contains seperate \c CableIndex and \c Command entries; these have been combined
- * into a single \c Event element which can be contructed using the new macro \ref MIDI_EVENT(). Existing applications should use the new macro and structure
- * element name.
- * - The library "LUFA/Drivers/USB/Core/ConfigDescriptor.c" source file has been renamed "LUFA/Drivers/USB/Core/ConfigDescriptors.c" as this was clashing with
- * files in some low level host mode demo applications, preventing parallel project builds. If you are referencing the project source files directly instead
- * of using the makefile module names, you will need to adjust your project makefile.
- *
- * \section Sec_Migration120219 Migrating from 111009 to 120219
- * <b>USB Core</b>
- * - The HID_KEYBOARD_MODIFER_* macros in the HID class driver have been corrected to HID_KEYBOARD_MODIFIER_* (note the spelling of "modifier").
- * Existing applications should switch over to the correctly spelled macro names.
- * - The names of the USB Device and USB Host class driver files have changed; a new "ClassDevice" and "ClassHost" postfix has been added to the
- * respective class driver files. Projects referencing the class driver source files by filename rather than the LUFA_SRC_USBCLASS makefile
- * variable should append these postfixes to the source file names. Projects including the USB class driver dispatch headers directly should either
- * switch to including the main USB driver header instead, or use the updated header filenames.
- * - The USB_CONFIG_ATTR_BUSPOWERED constant has been renamed to USB_CONFIG_ATTR_RESERVED, as this was misnamed. All devices must set this bit in
- * the Configuration descriptor's attributes field. As all devices are assumed to be bus-powered unless stated otherwise with the
- * USB_CONFIG_ATTR_SELFPOWERED flag a replacement constant for bus powered devices is not provided.
- *
- * <b>Device Mode</b>
- * - The device mode Audio class driver now requires a new user application callback, \ref CALLBACK_Audio_Device_GetSetInterfaceProperty().
- * Existing applications must implement this new callback, however if no audio entities are defined in the audio device's descriptors,
- * this function may be hard-coded to always return false for previous behaviour to be retained.
- *
- * \section Sec_Migration111009 Migrating from 110528 to 111009
- * <b>Non-USB Library Components</b>
- * - The \c JTAG_DEBUG_ASSERT() macro has been renamed \ref JTAG_ASSERT() to be consistent with \ref STDOUT_ASSERT().
- *
- * <b>USB Core</b>
- * - By default, unordered Endpoint and Pipe configuration is now allowed once again, via the previous workaround of
- * reconfiguring all Endpoints/Pipes in order each time a new Endpoint/Pipe is created. To minimize the compiled program
- * size, the new \c ORDERED_EP_CONFIG compile time option may be defined in the project makefile to restrict the ordering
- * in exchange for a smaller compiled binary size.
- * - The previous \c F_CLOCK symbol, required in the project makefile, has been renamed to \c F_USB. This is due to the previous name
- * being far too generic for use in future architecture ports, where multiple clock domains are used.
- *
- * <b>Device Mode</b>
- * - The Endpoint stream functions now all require a \c BytesProcessed parameter instead of the previous callback parameter.
- * This should be set to \c NULL to retain previous behaviour of the functions, or point to a location where the number of bytes
- * processed in the current transaction can be stored. If the \c BytesProcessed parameter is non \c NULL, each time the endpoint
- * bank becomes full and the packet is sent, the routine will exit with the new \ref ENDPOINT_RWSTREAM_IncompleteTransfer
- * error code to allow the user application to determine when to send the next chunk of data.
- * - The \ref CDC_Device_SendString() function now expects a null terminated string instead of an explicit length. Existing code
- * should use the new \ref CDC_Device_SendData() function, or remove the length parameter from the function call.
- * - The \c Endpoint_ResetFIFO() function has been renamed to \ref Endpoint_ResetEndpoint(), to make the API function names more
- * consistent. Existing applications using the old function name should simply replace it with a call to the new function name.
- * - The \c Endpoint_*_Byte() functions have been renamed Endpoint_*_8() to ensure they are correct across all architectures. Existing
- * code using these functions should replace the previous function names with the new function names.
- * - The \c Endpoint_*_Word() functions have been renamed Endpoint_*_16() to ensure they are correct across all architectures. Existing
- * code using these functions should replace the previous function names with the new function names.
- * - The \c Endpoint_*_DWord() functions have been renamed Endpoint_*_32() to ensure they are correct across all architectures. Existing
- * code using these functions should replace the previous function names with the new function names.
- * - The Device mode RNDIS class driver no longer stores the incoming and outgoing packets in the class driver instance; the user is
- * now expected to manually define a storage location for the packet data. Packets must now be sent and received manually via a call
- * to \ref RNDIS_Device_ReadPacket() and/or \ref RNDIS_Device_SendPacket().
- * - The definition of the Audio class \ref USB_Audio_Descriptor_Format_t has been altered, to remove the fixed singular
- * audio sample rate in the descriptor definition, and to rename the \c SampleFrequencyType to the more appropriate
- * \c TotalDiscreteSampleRates. Existing applications will need to add an array of \ref USB_Audio_SampleFreq_t elements
- * immediately following any \ref USB_Audio_Descriptor_Format_t descriptors, and insert the appropriate sampling rates
- * supported by the device, as well as rename the descriptor elements to match the updated element names.
- * - The device mode Audio class driver now requires a new user application callback, \ref CALLBACK_Audio_Device_GetSetEndpointProperty().
- * Existing applications must implement this new callback, however if multiple sample rates or pitch control is not used,
- * this function may be hard-coded to always return false for previous behaviour to be retained.
- * - The \c USB_ConfigurationNumber, \c USB_RemoteWakeupEnabled and \c USB_CurrentlySelfPowered globals have been renamed to
- * \ref USB_Device_ConfigurationNumber, \ref USB_Device_RemoteWakeupEnabled and \ref USB_Device_CurrentlySelfPowered to clearly indicate
- * the USB mode they relate to. Existing applications using these variables should rename all references to the previous names.
- * - The \c ENDPOINT_DESCRIPTOR_DIR_IN and \c ENDPOINT_DESCRIPTOR_DIR_OUT macros have now been replaced by \ref ENDPOINT_DIR_IN and
- * \ref ENDPOINT_DIR_OUT to improve code clarity.
- * - The \ref HID_DESCRIPTOR_JOYSTICK() macro now takes an additional (first) parameter indicating the number of axis in the joystick.
- *
- * <b>Host Mode</b>
- * - The Pipe stream functions now all require a \c BytesProcessed parameter instead of the previous callback parameter.
- * This should be set to \c NULL to retain previous behaviour of the functions, or point to a location where the number of bytes
- * processed in the current transaction can be stored. If the BytesProcessed parameter is non \c NULL, each time the pipe
- * bank becomes full and the packet is sent, the routine will exit with the new \ref PIPE_RWSTREAM_IncompleteTransfer
- * error code to allow the user application to determine when to send the next chunk of data.
- * - The \ref PRNT_Host_SendString() and \ref CDC_Host_SendString() functions now expect a null terminated string instead of an explicit
- * length. Existing code should use the new \ref PRNT_Host_SendData() and \ref CDC_Host_SendData() functions, or remove the
- * length parameter from the function call.
- * - The \c Pipe_ClearErrorFlags() function has been removed, as the pipe error flags are now automatically cleared when the
- * \ref Pipe_ClearError() function is called.
- * - The \c Pipe_*_Byte() functions have been renamed Pipe_*_8() to ensure they are correct across all architectures. Existing code using
- * these functions should replace the previous function names with the new function names.
- * - The \c Pipe_*_Word() functions have been renamed Pipe_*_16() to ensure they are correct across all architectures. Existing code using
- * these functions should replace the previous function names with the new function names.
- * - The \c Pipe_*_DWord() functions have been renamed Pipe_*_32() to ensure they are correct across all architectures. Existing code using
- * these functions should replace the previous function names with the new function names.
- * - The \c USB_Host_ClearPipeStall() function has been renamed to USB_Host_ClearEndpointStall(), as it operates on a full endpoing address
- * within the attached device and not a pipe within the host. Existing code using the old function name should update the function calls and
- * check for correct usage.
- *
- * \section Sec_Migration101122 Migrating from 100807 to 101122
- * <b>USB Core</b>
- * - A new USB driver source file, \c Drivers/USB/HighLevel/EndpointStream.c now exists. This source file should be added
- * to all project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source
- * variables.
- * - A new USB driver source file, \c Drivers/USB/HighLevel/PipeStream.c now exists. This source file should be added to all
- * project makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source variables.
- * - The \c EVENT_USB_InitFailure() event has been removed, as the \ref USB_Init() function will no longer fail; if not USB mode is
- * specified, the controller will default to UID selection mode.
- * - The USB mode specifier constants have been moved into a new enum and renamed. Existing projects should use the equivalent
- * value in the new \ref USB_Modes_t enum.
- * - All class driver headers are now included as part of the standard \c LUFA/Drivers/USB/USB.h master dispatch header, and should
- * no longer be included separately. Class driver module source files must still be added as a separate module in the project's
- * makefile if used.
- *
- * <b>Device Mode</b>
- * - Endpoints MUST be allocated in ascending order to ensure that bank corruption does not occur. Ensure that your user application
- * allocated endpoints in ascending order - or if your application uses the USB device mode class drivers, ensure that each instance's
- * endpoint indexes are not overlapped with other interface's endpoints.
- * - The signature for the \ref CALLBACK_USB_GetDescriptor() callback has changed, the \c void** \c const \c DescriptorAddress parameter is
- * now \c const \c void** \c const \c DescriptorAddress. Existing applications should update their callback signatures to match this, and
- * eliminate any casting of descriptor pointers to a non \c const pointer.
- * - The names of the class specific descriptor type defines in the USB Class drivers have changed - refer to the driver documentation
- * for each class driver for the new class specific descriptor type names.
- * - The \c ENDPOINT_DOUBLEBANK_SUPPORTED() macro is has been renamed \c ENDPOINT_BANKS_SUPPORTED() and now returns the total number of
- * banks supported by the given endpoint. Existing code should switch to the new naming scheme, and test that the return value of the
- * macro is equal to or greater than 2 to regain the previous functionality.
- * - The \c EVENT_USB_Device_UnhandledControlRequest() event is now named \ref EVENT_USB_Device_ControlRequest() and fires before (not after)
- * the internal library event handlers. Existing code should rename the event handlers in the user application to match the new event
- * name, and should ensure that the new execution order does not affect the application's operation.
- *
- * <b>Host Mode</b>
- * - Pipes MUST be allocated in ascending order to ensure that bank corruption does not occur. Ensure that your user application
- * allocated pipes in ascending order - or if your application uses the USB host mode class drivers, ensure that each instance's
- * pipe indexes are not overlapped with other interface's pipes.
- * - The \c PRNT_Host_SendData() function has been renamed to \ref PRNT_Host_SendString(). Existing applications should simply
- * replace all references to the obsolete function name with the new function name.
- * - The names of the class specific descriptor type defines in the USB Class drivers have changed - refer to the driver documentation
- * for each class driver for the new class specific descriptor type names.
- * - The Still Image Host class' function prefix has been changed from \c SImage_ to \c SI_, to remain consistent with the rest of the
- * driver's enums, type defines and constants.
- *
- * \section Sec_Migration100807 Migrating from 100513 to 100807
- *
- * <b>Non-USB Library Components</b>
- * - The Dataflash board driver stub file has changed, as dataflash functions previously located in the internal
- * Dataflash driver of the library have now been moved to the individual board files. Existing drivers can
- * copy-paste the new functions from the board Dataflash stub driver.
- *
- * <b>USB Core</b>
- * - A new USB driver source file, \c Drivers/USB/LowLevel/Device.c now exists. This source file should be added to all project
- * makefiles using the USB driver of LUFA, or the makefile should be updated to use the new module source variables.
- * - The \c Drivers/USB/LowLevel/DevChapter9.c source file has moved to \c Drivers/USB/HighLevel/DeviceStandardReq.c - this should
- * be updated in all project makefiles, or the makefile should be updated to use the new module source variables.
- * - The \c Drivers/USB/LowLevel/HostChapter9.h source file has moved to \c Drivers/USB/HighLevel/HostStandardReq.c - this should
- * be updated in all project makefiles, or the makefile should be updated to use the new module source variables.
- * - The \c Drivers/USB/LowLevel/LowLevel.c source file has moved to \c Drivers/LowLevel/USBController.c - this should be updated
- * in all project makefiles, or the makefile should be updated to use the new module source variables.
- *
- * <b>Device Mode</b>
- * - The \c USB_Device_IsRemoteWakeupSent() macro has been removed, as the remote wakeup request is now fully handled by the
- * enhanced \ref USB_Device_SendRemoteWakeup() function. Existing code may now discard any checks to \c USB_Device_IsRemoteWakeupSent().
- * - The \c USB_Device_IsUSBSuspended() macro has been removed, as it is obsolete. Existing code should compare \ref USB_DeviceState
- * to see if it the device is in the \ref DEVICE_STATE_Suspended state instead.
- * - The \ref CDC_Device_ReceiveByte() function has changed, and now returns a signed 16-bit integer, with -1 indicating no data was
- * received. This allows for more efficient coding, as a call to \ref CDC_Device_BytesReceived() is no longer needed if the exact
- * number of queued bytes received is not needed.
- *
- * <b>Host Mode</b>
- * - The \ref CDC_Host_ReceiveByte() function has changed, and now returns a signed 16-bit integer, with -1 indicating no data was
- * received. This allows for more efficient coding, as a call to \ref CDC_Host_BytesReceived() is no longer needed if the exact
- * number of queued bytes received is not needed.
- * - The \ref CDC_Host_USBTask() now calls \ref CDC_Host_Flush() automatically, flushing any queued data to the attached device. Manual
- * flushing of the interface is no longer needed if the flushes should be in sync with calls to \ref CDC_Host_USBTask().
- *
- * \section Sec_Migration100513 Migrating from 100219 to 100513
- *
- * <b>Non-USB Library Components</b>
- * - The \ref TWI_StartTransmission() function now takes in a timeout period, expressed in milliseconds, within which the addressed
- * device must respond or the function will abort.
- *
- * <b>Device Mode</b>
- * - The \ref USB_Init() function no longer calls \c sei() to enable global interrupts, as the user application may need
- * to perform other initialization before it is ready to handle global interrupts. The user application is now responsible
- * for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process
- * functions correctly.
- * - The \c USBInterrupt.c USB driver source file has been relocated from \c LUFA/Drivers/USB/HighLevel/ to \c LUFA/Drivers/USB/LowLevel.
- * Projects must update their makefile SRC values accordingly.
- * - The HID Device Class driver's function signature for the \ref CALLBACK_HID_Device_ProcessHIDReport() function has been changed, to
- * allow for a new \c ReportType parameter. This new parameter must be added in all user applications using the Device mode HID Class
- * Driver, but may be ignored unless Host-to-Device FEATURE HID reports are used.
- *
- * <b>Host Mode</b>
- * - The \ref USB_Init() function no longer calls \c sei() to enable global interrupts, as the user application may need
- * to perform other initialization before it is ready to handle global interrupts. The user application is now responsible
- * for enabling global interrupts before or shortly after calling \ref USB_Init() to ensure that the enumeration process
- * functions correctly.
- * - The \c USBInterrupt.c USB driver source file has been relocated from \c LUFA/Drivers/USB/HighLevel/ to \c LUFA/Drivers/USB/LowLevel.
- * Projects must update their makefile \c SRC values accordingly.
- * - The HID Host Class driver's function signature for the \ref HID_Host_SendReportByID() function has been changed, to allow for a new
- * ReportType parameter. Existing calls to this function should substitute \c REPORT_ITEM_TYPE_Out as this parameter's value.
- *
- * \section Sec_Migration100219 Migrating from 091223 to 100219
- *
- * <b>Non-USB Library Components</b>
- * - Due to some ADC channels not being identical to their ADC MUX selection masks for single-ended conversions on some AVR models,
- * the ADC driver now has explicit masks for each of the standard ADC channels (see \ref Group_ADC). These masks should be used
- * when calling the ADC functions to ensure proper operation across all AVR models. Note that the \ref ADC_SetupChannel() function
- * is an exception, and should always be called with a channel number rather than a channel mask.
- *
- * <b>Host Mode</b>
- * - The MIDI Host Class driver send and receive routines now operate on packed events, where multiple MIDI events may be
- * packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send
- * pipe bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually
- * flush the queued event(s) to the device by calling \ref MIDI_Host_Flush().
- * - The \ref Pipe_IsEndpointBound() function now takes the endpoint's direction into account, by checking if the MSB of the endpoint's address
- * is set to denote IN endpoints. If the previous functionality where the direction is to be discounted is required, mask the endpoint
- * address against the \ref PIPE_EPNUM_MASK token before calling \ref Pipe_IsEndpointBound().
- *
- * <b>Device Mode</b>
- * - The MIDI Device Class driver send and receive routines now operate on packed events, where multiple MIDI events may be
- * packed into a single USB packet. This means that the sending of MIDI events will now be delayed until the MIDI send
- * endpoint bank is full. To override this new behaviour and revert to the previous behaviour, the user application may manually
- * flush the queued event(s) to the host by calling \ref MIDI_Device_Flush().
- *
- * \section Sec_Migration091223 Migrating from 091122 to 091223
- *
- * <b>Host Mode</b>
- * - The Still Image Host Class driver \ref SI_Host_USBTask() and \ref SI_Host_ConfigurePipes() functions were misnamed, and are
- * now named \c SImage_Host_USBTask() and \c SImage_Host_ConfigurePipes() respectively.
- * - The \c HOST_SENDCONTROL_DeviceDisconnect enum value has been renamed to \ref HOST_SENDCONTROL_DeviceDisconnected to be in
- * line with the rest of the library error codes.
- * - The HID Parser item usages no longer contain separate minimum and maximum values, as this was a violation of the HID
- * specification. Instead, the values are distributed evenly across each item as its usage value, to ensure that all items
- * can be distinguished from one-another.
- *
- * <b>Device Mode</b>
- * - The \ref CALLBACK_HID_Device_CreateHIDReport() HID Device Class driver callback now has a new \c ReportType parameter to
- * indicate the report type to generate. Existing applications may simply add and ignore this additional parameter.
- *
- * \section Sec_Migration091122 Migrating from 090924 to 091122
- *
- * <b>Host Mode</b>
- * - The \c HID_PARSE_UsageStackOverflow HID parser error constant is now named \ref HID_PARSE_UsageListOverflow
- * - The \ref CALLBACK_HIDParser_FilterHIDReportItem() HID Parser callback now passes a complete \ref HID_ReportItem_t to the
- * user application, instead of just its attributes.
- * - The \c USB_GetDeviceConfigDescriptor() function was incorrectly named and is now called \ref USB_Host_GetDeviceConfigDescriptor().
- *
- * \section Sec_Migration090924 Migrating from 090810 to 090924
- *
- * <b>Non-USB Library Components</b>
- * - The \c ADC_Off() function has been renamed to \c ADC_ShutDown() to be consistent with the rest of the library.
- * - The \ref SPI_Init() routine's parameters have changed, so that the clock polarity and data sampling modes can be set. See
- * the \ref SPI_Init() function documentation for more details
- * - The \ref Dataflash_Init() routine no longer initializes the SPI bus - the SPI bus should be initialized manually via a
- * call to \ref SPI_Init() before using the Dataflash driver
- *
- * <b>Host Mode</b>
- * - The \c USB_GetDeviceConfigDescriptor() function's parameters and behaviour has changed; the user is required to
- * preallocate the largest allowable buffer, and pass the size of the buffer to the function. This allows for a single
- * call to the function to retrieve, size check and validate the Configuration Descriptor rather than having the user
- * application perform these intermediary steps.
- * - The HID report parser now requires a mandatory callback in the user code, to filter only the items the application
- * is interested in into the processed HID report item structure to save RAM. See \ref CALLBACK_HIDParser_FilterHIDReportItem().
- * - The HID report parser now always parses FEATURE and always ignores constant-data items - the \c HID_ENABLE_FEATURE_PROCESSING
- * and \c HID_INCLUDE_CONSTANT_DATA_ITEMS compile time tokens now have no effect.
- * - The \c USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate \c USB_Descriptor_*
- * and \c USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in
- * the one project. For existing projects using the standardized names, change all code to use the \c USB_StdDescriptor_* variants.
- *
- * <b>Device Mode</b>
- * - The \c USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token has been removed - there are now separate \c USB_Descriptor_*
- * and \c USB_StdDescriptor_* structures for both the LUFA and standardized element naming conventions so that both may be used in
- * the one project. For existing projects using the standardized names, change all code to use the \c USB_StdDescriptor_* variants.
- *
- * \section Sec_Migration090810 Migrating from 090605 to 090810
- *
- * <b>All</b>
- * - The "Simple Scheduler" has been <i>deprecated</i>, as it was little more than an abstracted loop and caused much confusion.
- * User applications using the scheduler should switch to regular loops instead. The scheduler code will be removed in a future
- * release.
- * - The "Dynamic Memory Block Allocator" has been removed, as it was unused in (and unrelated to) the LUFA library and never
- * used in user applications.
- *
- * <b>Non-USB Library Components</b>
- * - The \c ATTR_NOINLINE function attribute macro has been renamed to \ref ATTR_NO_INLINE to be in line with the rest of the function attribute
- * macro names.
- *
- * <b>Library Demos</b>
- * - Most demos now have a corresponding Class Driver implementation, which uses the new internal library class drivers for the standard
- * USB classes. This allows for more rapid device and host development, and so should be used in preference to the low level APIs where
- * possible so that fixes to the class drivers propagate to all applications which use them automatically with each new LUFA release.
- *
- * <b>Host Mode</b>
- * - The \c HIDParser.c module has moved from \c LUFA/Drivers/USB/Class/ to \c LUFA/Drivers/USB/Class/Host/.
- * - The \c USB_GetDeviceConfigDescriptor() function now requires the desired configuration index within the device as its first
- * parameter, to add support for multi-configuration devices. Existing code should use a configuration index of 1 to indicate the
- * first configuration descriptor within the device.
- * - The non-standard "Ready" host state has been removed. Existing \ref HOST_STATE_Configured code should be moved to the end of
- * the existing \ref HOST_STATE_Addressed state, and the existing HOST_STATE_Ready state code should be moved to the \ref HOST_STATE_Configured
- * state.
- * - The \c USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_HostState explicitly to ensure the host is
- * in the desired state instead.
- * - The USB event names have been changed and their firing conditions changed to properly separate out Host mode events from Device mode
- * events. See the \ref Group_Events page for details on the new event names and firing conditions.
- *
- * <b>Device Mode</b>
- * - The \ref CALLBACK_USB_GetDescriptor() function now takes an extra parameter to specify the descriptor's memory space so that
- * descriptors in mixed memory spaces can be used. The previous functionality can be returned by defining the \c USE_FLASH_DESCRIPTORS
- * token in the project makefile to fix all descriptors into FLASH space and remove the extra function parameter.
- * - The \c USB_IsSuspended global has been removed - test \ref USB_DeviceState against \ref DEVICE_STATE_Suspended instead.
- * - The \c USB_IsConnected global has been removed, as it is too vague for general use. Test \ref USB_DeviceState explicitly to ensure the device
- * is in the desired state instead.
- * - The VBUS events have been removed, as they are already exposed to the user via the \c USB_Connect and \c USB_Disconnect events.
- * - The USB event names have been changed and their firing conditions changed to properly separate out Host mode events from Device mode
- * events. See the \ref Group_Events page for details on the new event names and firing conditions.
- *
- * \section Sec_Migration090605 Migrating from 090510 to 090605
- *
- * <b>Device Mode</b>
- * - Support for non-control data endpoint interrupts has been dropped due to many issues in the implementation. All existing
- * projects using interrupts on non-control endpoints should switch to polling. For control interrupts, the library can
- * manage the control endpoint via interrupts automatically by compiling with the \c INTERRUPT_CONTROL_ENDPOINT token defined.
- * - The \c DESCRIPTOR_ADDRESS() macro has been removed. User applications should use normal casts to obtain a descriptor's memory
- * address.
- * - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See
- * \ref Group_Events for new API details.
- * - The \c STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular
- * function signatures of a function accepting no arguments and returning a \c uint8_t value.
- * - The \c Event_DeviceError() event no longer exists, as its sole caller (unlinked \c USB_GetDescriptor() function) now produces a
- * compilation error rather than a runtime error. The \c StdDescriptors.c file no longer exists as a result, and should be removed
- * from project makefiles.
- * - The \c USB_GetDescriptor() function has been renamed to \ref CALLBACK_USB_GetDescriptor() to be in line with the new \c CALLBACK_
- * function prefixes for functions which <i>must</i> be implemented in the user application.
- *
- * <b>Host Mode</b>
- * - Support for non-control data pipe interrupts has been dropped due to many issues in the implementation. All existing
- * projects using interrupts on non-control pipes should switch to polling.
- * - The library events system has been rewritten, so that all macros have been removed to allow for clearer user code. See
- * \ref Group_Events for new API details.
- * - The \c STREAM_CALLBACK() macro has been removed. User applications should replace all instances of the macro with regular
- * function signatures of a function accepting no arguments and returning a \c uint8_t value.
- * - The \c DESCRIPTOR_COMPARATOR() macro has been removed. User applications should replace all instances of the macro with
- * regular function signatures of a function accepting a void pointer to the descriptor to test, and returning a \c uint8_t value.
- *
- * \section Sec_Migration090510 Migrating from 090401 to 090510
- *
- * <b>All</b>
- * - The \c ButtLoadTag.h header has been removed, as it was never used for its intended purpose. Projects should either remove all
- * \c BUTTLOADTAG() elements, or download and extract \c ButtLoadTag.h header from the ButtLoad project.
- * - The \c Drivers/AT90USBXXX/ directory has been renamed to \c Drivers/Peripheral/.
- * - The \c Serial_Stream driver has been renamed to \c SerialStream to remain consistent with the rest of the library naming scheme.
- * - The HWB driver has changed to the \c Buttons driver. See the board Buttons driver documentation for the new API.
- *
- * <b>Dual Role Mode</b>
- * - The \c USB_PowerOnFail event has been renamed to \c USB_InitFailure.
- * - The functions in \c OTG.h have been renamed to remain more consistent with the library API. See the functions in \c OTG.h for more
- * details.
- *
- * <b>Device Mode</b>
- * - The \c Endpoint_ClearCurrentBank() macro has been removed, and is now replaced with the \ref Endpoint_ClearIN(), \ref Endpoint_ClearOUT()
- * macros. See \c Endpoint.h documentation for more details on the new endpoint management macros.
- * - The \c Endpoint_ReadWriteAllowed() macro has been renamed to \ref Endpoint_IsReadWriteAllowed() to be more consistent with the rest of
- * the API naming scheme.
- * - The \c Endpoint_IsSetupINReady() and \c Endpoint_IsSetupOUTReceived() macros have been renamed to \ref Endpoint_IsINReady() and
- * \ref Endpoint_IsOUTReceived() respectively.
- * - The \c Endpoint_IsSetupReceived() macro has been renamed to \ref Endpoint_IsSETUPReceived().
- * - The \c Endpoint_ClearSetupReceived() macro has been renamed to \ref Endpoint_ClearSETUP().
- * - All endpoint read/write/discard aliases which did not have an explicitly endianness specifier (such as \c Endpoint_Read_Word()) have
- * been removed for clarity. Existing projects should use the \c _LE suffix on such calls to use the explicit Little Endian versions.
- * - The \c USB_UnhandledControlPacket event no longer has any parameters. User code should no longer attempt to read in the remainder of
- * the Control Request header as all Control Request header data is now preloaded by the library and made available in the
- * USB_ControlRequest structure.
- * - The \c FEATURELESS_CONTROL_ONLY_DEVICE token has been renamed to \c CONTROL_ONLY_DEVICE.
- * - The \c STATIC_ENDPOINT_CONFIGURATION is no longer applicable as the library will apply this optimization when appropriate automatically.
- * - The values of the \ref Endpoint_Stream_RW_ErrorCodes_t and \ref Endpoint_ControlStream_RW_ErrorCodes_t enums have had the \c ERROR_ portion
- * of their names removed.
- *
- * <b>Host Mode</b>
- * - The \ref USB_Host_SendControlRequest() function no longer automatically selects the Control pipe (pipe 0) to allow it to be used on
- * other control type pipes. Care should be taken to ensure that the Control pipe is always selected before the function is called
- * in existing projects where the Control pipe is to be operated on.
- * - The USB Host management task now saves and restores the currently selected pipe before and after the task runs. Projects no longer
- * need to manage this manually when calling the USB management task.
- * - The \c Pipe_ClearCurrentBank() macro has been removed, and is now replaced with the Pipe_ClearIN(), Pipe_ClearOUT() macros. See
- * Pipe.h documentation for more details on the new pipe management macros.
- * - The \c Pipe_ReadWriteAllowed() macro has been renamed to \ref Pipe_IsReadWriteAllowed() to be more consistent with the rest of the API
- * naming scheme.
- * - The \c Pipe_IsSetupINReceived() and \c Pipe_IsOutReady() macros have been renamed to \ref Pipe_IsINReceived() and \ref Pipe_IsOUTReady()
- * respectively.
- * - The new \ref Pipe_ClearSETUP() macro should be used to send SETUP transactions, rather than the previous \c Pipe_ClearSetupOUT() macro.
- * - The \c Pipe_IsSetupSent() macro has been renamed to \ref Pipe_IsSETUPSent().
- * - The \c Pipe_ClearSetupSent() macro is no longer applicable and should be removed.
- * - All pipe read/write/discard aliases which did not have an explicitly endianness specifier (such as \c Pipe_Read_Word()) have
- * been removed for clarity. Existing projects should use the \c _LE suffix on such calls to use the explicit Little Endian versions.
- * - The \c Host_IsResetBusDone() macro has been renamed to \c Host_IsBusResetComplete().
- * - The \c Pipe_Ignore_Word() and \c Pipe_Ignore_DWord() functions have been renamed to \c Pipe_Discard_Word() and \c Pipe_Discard_DWord()
- * to remain consistent with the rest of the pipe API.
- * - It is no longer needed to manually include the headers from \c LUFA/Drivers/USB/Class, as they are now included along with the rest
- * of the USB headers when \c LUFA/Drivers/USB/USB.h is included.
- * - Functions in the \c ConfigDescriptor.h header file no longer have \c Host_ as part of their names.
- * - The \c ProcessHIDReport() has been renamed to \ref USB_ProcessHIDReport(), \c GetReportItemInfo() has been renamed to \ref USB_GetHIDReportItemInfo()
- * and \c SetReportItemInfo() has been renamed to \ref USB_GetHIDReportItemInfo().
- * - The values of the \ref DSearch_Return_ErrorCodes_t and \ref DSearch_Comp_Return_ErrorCodes_t enums have had their respective \c Descriptor_Search
- * and \c Descriptor_Search_Comp prefixes changed to all caps.
- * - The \c USB_HostRequest global has been renamed to \ref USB_ControlRequest, and is used in Device mode also. The \c USB_Host_Request_Header_t
- * structure type has been renamed to \ref USB_Request_Header_t.
- * - The values of the \ref Pipe_Stream_RW_ErrorCodes_t enum have had the \c ERROR_ portion of their names removed.
- *
- * \section Sec_Migration090401 Migrating from 090209 to 090401
- *
- * <b>All</b>
- * - LUFA projects must now give the raw input clock frequency (before any prescaling) as a compile time constant \c F_USB,
- * defined in the project makefile and passed to the compiler via the -D switch.
- * - The makefile EEPROM programming targets for FLIP and dfu-programmer no longer program in the FLASH data in addition to the
- * EEPROM data into the device. If both are to be programmed, both the EEPROM and FLASH programming targets must be called.
- * - As the avr-libc macro has been corrected in recent avr-libc distributions, the \c SetSystemClockPrescaler() macro has been removed.
- * Include \c <avr/power.h> and call \c clock_prescale_set(clock_div_1); instead on recent avr-libc distributions.
- *
- * <b>Library Demos</b>
- * - The USBtoSerial demo now discards all data when not connected to a host, rather than buffering it for later transmission.
- *
- * <b>Non-USB Library Components</b>
- * - The \c ATTR_ALWAYSINLINE function attribute macro has been renamed to \ref ATTR_ALWAYS_INLINE.
- * - Custom board Dataflash drivers now require the implementation of \ref Dataflash_SelectChipFromPage() and \ref Dataflash_SendAddressBytes().
- *
- * <b>Device Mode</b>
- * - The \c NO_CLEARSET_FEATURE_REQUEST compile time token has been renamed to \c FEATURELESS_CONTROL_ONLY_DEVICE, and its function expanded
- * to also remove parts of the Get Status chapter 9 request to further reduce code usage. On all applications currently using the
- * \c NO_CLEARSET_FEATURE_REQUEST compile time token, it can be replaced with the \c FEATURELESS_CONTROL_ONLY_DEVICE token with no further
- * modifications required.
- *
- * \section Sec_Migration090209 Migrating from 081217 to 090209
- *
- * <b>Device Mode</b>
- * - The \c ENDPOINT_MAX_ENDPOINTS constant has been renamed to the more appropriate name of \c ENDPOINT_TOTAL_ENDPOINTS.
- * - The \c USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user
- * makefile if desired to restore the previous 50ms timeout.
- *
- * <b>Host Mode</b>
- * - The \c PIPE_MAX_ENDPOINTS constant has been renamed to the more appropriate name of \c PIPE_TOTAL_ENDPOINTS.
- * - The \c USB_STREAM_TIMEOUT_MS stream timeout default period has been extended to 100ms. This can be overridden in the user
- * makefile if desired to restore the previous 50ms timeout.
- * - The \c USB_DeviceEnumerationFailed event now contains a second \c SubErrorCode parameter, giving the error code of the function
- * which failed.
- * - The \c HID_PARSE_Sucessful enum member constant name has been corrected to \ref HID_PARSE_Successful.
- *
- * <b>Non-USB Library Components</b>
- * - The previous \c SPI_SendByte() functionality is now located in \ref SPI_TransferByte(). \ref SPI_SendByte() now discards the return byte
- * for speed, to compliment the new \ref SPI_ReceiveByte() function. If bidirectional SPI transfers are required, calls to \ref SPI_SendByte()
- * should be changed to \ref SPI_TransferByte().
- * - The serial driver now sets the Tx line as an output explicitly, and enables the pull-up of the Rx line.
- * - The \ref Serial_Init() and \c SerialStream_Init() functions now take a second \c DoubleSpeed parameter, which indicates if the USART
- * should be initialized in double speed mode - useful in some circumstances for attaining baud rates not usually possible at the given AVR
- * clock speed.
- *
- * \section Sec_Migration171208 Migrating from V1.5.3 to 081217
- *
- * <b>All</b>
- * - The MyUSB project name has been changed to LUFA (Lightweight Framework for USB AVRs). All references to MyUSB, including macro names,
- * have been changed to LUFA.
- *
- * <b>Library Demos</b>
- * - The ReconfigureUSART() routine in the USBtoSerial demo was not being called after new line encoding
- * parameters were set by the host. Projects built on the USBtoSerial code should update to the latest version.
- * - The HID Parser now supports multiple report (on a single endpoint) HID devices. The MouseHostWithParser and
- * KeyboardHostWithPaser demos use the updated API functions to function correctly on such devices. Projects
- * built on either "WithParser" demo should update to the latest code.
- * - The RNDIS demo TCP stack has been modified so that connections can be properly closed. It is still not
- * recommended that the MyUSB RNDIS demo TCP/IP stack be used for anything other than demonstration purposes,
- * as it is neither a full nor a standards compliant implementation.
- *
- * <b>Non-USB Library Components</b>
- * - The Serial_IsCharReceived() macro has been changed to the correct spelling of Serial_IsCharReceived() in Serial.h.
- *
- * <b>Device Mode</b>
- * - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask
- * to be used in the Options parameter of the USB_Init() function.
- * - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is
- * currently initialized.
- * - Interrupts are now disabled when processing control requests, to avoid problems with interrupts causing the library
- * or user request processing code to exceed the strict USB timing requirements on control transfers.
- * - The USB Reset event now resets and disables all device endpoints. If user code depends on endpoints remaining configured
- * after a Reset event, it should be altered to explicitly re-initialize all user endpoints.
- * - The prototype for the GetDescriptor function has been changed, as the return value was redundant. The function now
- * returns the size of the descriptor, rather than passing it back via a parameter, or returns NO_DESCRIPTOR if the specified
- * descriptor does not exist.
- * - The NO_DESCRIPTOR_STRING macro has been renamed NO_DESCRIPTOR, and is now also used as a possible return value for the
- * GetDescriptor function.
- *
- * <b>Host Mode</b>
- * - The MANUAL_PLL_CONTROL compile time token has been removed, and replaced with a USB_OPT_MANUAL_PLL mask
- * to be used in the Options parameter of the USB_Init() function.
- * - The HID report parser now supports multiple Report IDs. The HID report parser GetReportItemInfo() and
- * SetReportItemInfo() routines now return a boolean, set if the requested report item was located in the
- * current report. If sending a report to a multi-report device, the first byte of the report is automatically
- * set to the report ID of the given report item.
- * - Calling USB_Init() now forces a complete USB interface reset and enumeration, even if the USB interface is
- * currently initialized.
- *
- * \section Sec_Migration152 Migrating from V1.5.2 to V1.5.3
- *
- * <b>Library Demos</b>
- * - Previously, all demos contained a serial number string descriptor, filled with all zeros. A serial number
- * string is required in Mass Storage devices, or devices which are to retain settings when moved between
- * ports on a machine. As people were not changing the serial number value, this was causing conflicts and so
- * the serial number descriptor has been removed from all but the Mass Storage demo, which requires it.
- * - The AudioOut and AudioIn demos did not previously silence their endpoints when the host has deactivated
- * them. Projects built upon either demo should upgrade to the latest code.
- * - The FEATURE_ENDPOINT macro has been renamed FEATURE_ENDPOINT_HALT, and is now correctly documented.
- * - The MassStoreHost demo contained errors which caused it to lock up randomly on certain devices. Projects built
- * on the MassStoreDemo code should update to the latest version.
- * - The Interrupt type endpoint in the CDC based demos previously had a polling interval of 0x02, which caused
- * problems on some Linux systems. This has been changed to 0xFF, projects built on the CDC demos should upgrade
- * to the latest code.
- * - The HID keyboard and mouse demos were not previously boot mode compatible. To enable boot mode support, projects
- * built on the keyboard or mouse demos (or derivatives) should upgrade to the latest code.
- * - The Mass Storage demo was not previously standards compliant. Projects built on the Mass Storage demo should
- * upgrade to the latest code.
- * - The USART was not being reconfigured after the host sent new encoding settings in the USBtoSerial demo. This was
- * previously discovered and fixed, but the change was lost. Projects built on the USBtoSerial demo should update
- * to the latest code.
- *
- * <b>Device Mode</b>
- * - The endpoint non-control stream functions now have a default timeout of 50ms between packets in the stream.
- * If this timeout is exceeded, the function returns the new ENDPOINT_RWSTREAM_ERROR_Timeout error value. The
- * timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired
- * timeout duration in ms.
- * - Rather than returning fixed values, the flags indicating if the device has Remote Wakeup currently enabled
- * and/or is self-powered are now accessed and set through the new USB_RemoteWakeupEnabled and
- * USB_CurrentlySelfPowered macros. See the DevChapter9.h documentation for more details.
- * - All endpoint stream functions now require an extra Callback function parameter. Existing code may be updated
- * to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing
- * the token NO_STREAM_CALLBACKS to the compiler using the -D switch.
- *
- * <b>Host Mode</b>
- * - The pipe non-control stream functions now have a default timeout of 50ms between packets in the stream.
- * If this timeout is exceeded, the function returns the new PIPE_RWSTREAM_ERROR_Timeout error value. The
- * timeout value can be overridden by defining the USB_STREAM_TIMEOUT_MS in the project makefile to the desired
- * timeout duration in ms.
- * - CollectionPath_t has been renamed to HID_CollectionPath_t to be more in line with the other HID parser structures.
- * - All pipe stream functions now require an extra Callback function parameter. Existing code may be updated
- * to either supply NO_STREAM_CALLBACK as the extra parameter, or disable stream callbacks altogether by passing
- * the token NO_STREAM_CALLBACKS to the compiler using the -D switch.
- *
- * \section Sec_Migration151 Migrating from V1.5.1 to V1.5.2
- *
- * <b>Library Demos</b>
- * - The RNDIS demo application has been updated so that it is functional on Linux under earlier implementations
- * of the RNDIS specification, which had non-standard behaviour. Projects built upon the demo should upgrade
- * to the latest code.
- * - The DFU class bootloader has had several bugs corrected in this release. It is recommended that where
- * possible any existing devices upgrade to the latest bootloader code.
- *
- * \section Sec_Migration150 Migrating from V1.5.0 to V1.5.1
- *
- * <b>Library Demos</b>
- * - The USBtoSerial demo was broken in the 1.5.0 release, due to incorrect register polling in place of the
- * global "Transmitting" flag. The change has been reverted in this release. Projects built upon the demo
- * should upgrade to the latest code.
- * - The HID class demos did not implement the mandatory GetReport HID class request. Projects built upon the HID
- * demos should upgrade to the latest code.
- * - The HID class demos incorrectly reported themselves as boot-protocol enabled HID devices in their descriptors.
- * Projects built upon the HID demos should upgrade to the latest code.
- * - The MIDI device demo had incorrect AudioStreaming interface descriptors. Projects built upon the MIDI demo
- * should upgrade to the latest code.
- * - The AudioOut demo did not correctly tristate the speaker pins when USB was disconnected, wasting power.
- * Projects built upon the AudioOut demo should upgrade to the latest code.
- *
- * \section Sec_Migration141 Migrating from V1.4.1 to V1.5.0
- *
- * <b>Library Demos</b>
- * - Previous versions of the library demos had incorrectly encoded BCD version numbers in the descriptors. To
- * avoid such mistakes in the future, the VERSION_BCD macro has been added to StdDescriptors.h. Existing
- * projects should at least manually correct the BCD version numbers, or preferably update the descriptors to
- * encode the version number in BCD format using the new macro.
- * - The mandatory GetReport class-specific request was accidentally omitted from previous versions of the demos
- * based on the Human Interface Device (HID) class. This has been corrected, and any user projects based on the
- * HID demos should also be updated accordingly.
- * - The CDC demos now correctly send an empty packet directly after a full packet, to end the transmission.
- * Failure to do this on projects which always or frequently send full packets will cause buffering issues on
- * the host OS. All CDC user projects are advised to update their transmission routines in the same manner as
- * the library CDC demos.
- * - The previous interrupt-driven Endpoint/Pipe demos did not properly save and restore the currently selected
- * Endpoint/Pipe when the ISR fired. This has been corrected - user projects based on the interrupt driven
- * demos should also update to properly save and restore the selected Endpoint/Pipe.
- *
- * <b>Non-USB Library Components</b>
- * - The Atomic.h and ISRMacro.h header files in MyUSB/Common have been removed, as the library is now only
- * compatible with avr-libc library versions newer than the time before the functionality of the deleted
- * headers was available.
- *
- * <b>Device Mode</b>
- * - The GetDescriptor function (see StdDescriptors.h) now has a new prototype, with altered parameter names and
- * functions. Existing projects will need to update the GetDescriptor implementation to reflect the new API.
- * The previously split Type and Index parameters are now passed as the original wValue parameter to the
- * function, to make way for the USB specification wIndex parameter which is <i>not</i> the same as the
- * previous Index parameter.
- * - The USB_UnhandledControlPacket event (see Events.h) now has new parameter names, to be in line with the
- * official USB specification. Existing code will need to be altered to use the new parameter names.
- * - The USB_CreateEndpoints event (see Events.h) has been renamed to USB_ConfigurationChanged, which is more
- * appropriate. It fires in an identical manner to the previously named event, thus the only change to be made
- * is the event name itself in the user project.
- * - The USB_Descriptor_Language_t structure no longer exists in StdDescriptors.h, as this was a
- * pseudo-descriptor modeled on the string descriptor. It is replaced by the true USB_Descriptor_String_t type
- * descriptor as indicated in the USB specification, thus all device code must be updated accordingly.
- * - The names of several Endpoint macros have been changed to be more consistent with the rest of the library,
- * with no implementation changes. This means that existing code can be altered to use the new macro names
- * with no other considerations required. See Endpoint.h for the new macro names.
- * - The previous version of the MassStorage demo had an incorrect value in the SCSI_Request_Sense_Response_t
- * structure named SenseData in SCSI.c which caused some problems with some hosts. User projects based on this
- * demo should correct the structure value to maintain compatibility across multiple OS platforms.
- * - By default, the descriptor structures use the official USB specification names for the elements. Previous
- * versions of the library used non-standard (but more verbose) names, which are still usable in the current
- * and future releases when the correct compile time option is enabled. See the StdDescriptors.h file
- * documentation for more details.
- *
- * <b>Host Mode</b>
- * - The USB_Host_Request_Header_t structure in HostChapter9.h (used for issuing control requests) has had its
- * members renamed to the official USB specification names for requests. Existing code will need to be updated
- * to use the new names.
- * - The names of several Pipe macros have been changed to be more consistent with the rest of the library,
- * with no implementation changes. This means that existing code can be altered to use the new macro names
- * with no other considerations required. See Pipe.h for the new macro names.
- * - By default, the descriptor structures use the official USB specification names for the elements. Previous
- * versions of the library used non-standard (but more verbose) names, which are still usable in the current
- * and future releases when the correct compile time option is enabled. See the StdDescriptors.h file
- * documentation for more details.
- * - The names of the macros in Host.h for controlling the SOF generation have been renamed, see the Host.h
- * module documentation for the new macro names.
- *
- * <b>Dual Role Mode</b>
- * - The OTG.h header file has been corrected so that the macros now perform their stated functions. Any existing
- * projects using custom headers to fix the broken OTG header should now be altered to once again use the OTG
- * header inside the library.
- * - The USB_DeviceEnumerationComplete event (see Events.h) now also fires in Device mode, when the host has
- * finished enumerating the device. Projects relying on the event only firing in Host mode should be updated
- * so that the event action only occurs when the USB_Mode global is set to USB_MODE_HOST.
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ProgrammingApps.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ProgrammingApps.txt deleted file mode 100644 index 6ff185676..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/ProgrammingApps.txt +++ /dev/null @@ -1,30 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_ProgrammingApps Programming an Application into a USB AVR
- *
- * Once you have built an application, you will need a way to program in the resulting ".HEX" file (and, if your
- * application uses EEPROM variables with initial values, also a ".EEP" file) into your USB AVR. Normally, the
- * reprogramming of an AVR device must be performed using a special piece of programming hardware, through one of the
- * supported AVR programming protocols - ISP, HVSP, HVPP, JTAG, dW or PDI. This can be done through a custom programmer,
- * a third party programmer, or an official Atmel AVR tool - for more information, see the <a>atmel.com</a> website.
- *
- * Alternatively, you can use the bootloader. From the Atmel factory, each USB AVR comes preloaded with the Atmel
- * DFU (Device Firmware Update) class bootloader, a small piece of AVR firmware which allows the remainder of the
- * AVR to be programmed through a non-standard interface such as the serial USART port, SPI, or (in this case) USB.
- * Bootloaders have the advantage of not requiring any special hardware for programming, and cannot usually be erased
- * or broken without an external programming device. They have disadvantages however; they cannot change the fuses of
- * the AVR (special configuration settings that control the operation of the chip itself) and a small portion of the
- * AVR's FLASH program memory must be reserved to contain the bootloader firmware, and thus cannot be used by the
- * loaded application.
- *
- * If you wish to use the DFU bootloader to program in your application, refer to your DFU programmer's documentation.
- * Atmel provides a free utility called FLIP which is USB AVR compatible, and an open source (Linux compatible)
- * alternative exists called "dfu-programmer".
- *
- * \see \ref Page_BuildModule_DFU for information on the LUFA build system DFU module, for automatic DFU bootloader
- * programming makefile targets.
- */
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/SoftwareBootloaderJump.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/SoftwareBootloaderJump.txt deleted file mode 100644 index 328466103..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/SoftwareBootloaderJump.txt +++ /dev/null @@ -1,71 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/**
- * \page Page_SoftwareBootloaderStart Entering the Bootloader via Software
- *
- * A common requirement of many applications is the ability to jump to the programmed bootloader of a chip
- * on demand, via the code's firmware (i.e. not as a result of any physical user interaction with the
- * hardware). This might be required because the device does not have any physical user input, or simply
- * just to streamline the device upgrade process on the host PC.
- *
- * The following C code snippets may be used to enter the bootloader upon request by the user application.
- * By using the watchdog to physically reset the controller, it is ensured that all system hardware is
- * completely reset to their defaults before the bootloader is run. This is important; since bootloaders
- * are written to occupy a very limited space, they usually make assumptions about the register states based
- * on the default values after a hard-reset of the chip.
- *
- * \section Sec_SoftareBootAVR8 AVR8 Architecture
- * The following software bootloader jump code is written for the AVR8 architecture.
- *
- * \code
- * #include <avr/wdt.h>
- * #include <avr/io.h>
- * #include <util/delay.h>
- *
- * #include <LUFA/Common/Common.h>
- * #include <LUFA/Drivers/USB/USB.h>
- *
- * uint32_t Boot_Key ATTR_NO_INIT;
- *
- * #define MAGIC_BOOT_KEY 0xDC42ACCA
- * #define BOOTLOADER_START_ADDRESS (FLASH_SIZE_BYTES - BOOTLOADER_SEC_SIZE_BYTES)
- *
- * void Bootloader_Jump_Check(void) ATTR_INIT_SECTION(3);
- * void Bootloader_Jump_Check(void)
- * {
- * // If the reset source was the bootloader and the key is correct, clear it and jump to the bootloader
- * if ((MCUSR & (1 << WDRF)) && (Boot_Key == MAGIC_BOOT_KEY))
- * {
- * Boot_Key = 0;
- * ((void (*)(void))BOOTLOADER_START_ADDRESS)();
- * }
- * }
- *
- * void Jump_To_Bootloader(void)
- * {
- * // If USB is used, detach from the bus and reset it
- * USB_Disable();
- *
- * // Disable all interrupts
- * cli();
- *
- * // Wait two seconds for the USB detachment to register on the host
- * Delay_MS(2000);
- *
- * // Set the bootloader key to the magic value and force a reset
- * Boot_Key = MAGIC_BOOT_KEY;
- * wdt_enable(WDTO_250MS);
- * for (;;);
- * }
- * \endcode
- *
- * Note that the bootloader magic key can be any arbitrary value. The <em>FLASH_SIZE_BYTES</em> and
- * <em>BOOTLOADER_SEC_SIZE_BYTES</em> tokens should be replaced with the total flash size of the AVR
- * in bytes, and the allocated size of the bootloader section for the target AVR.
- *
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Style/Footer.htm b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Style/Footer.htm deleted file mode 100644 index c6de4e64d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Style/Footer.htm +++ /dev/null @@ -1,35 +0,0 @@ -<!--BEGIN GENERATE_TREEVIEW-->
- <div id="nav-path" class="navpath"><!-- id is needed for treeview function! -->
- <ul>
- <li class="footer" style="float:left !important;">
- $generatedby
- <a href="http://www.doxygen.org/index.html">
- <img class="footer" src="$relpath$doxygen.png" alt="doxygen"/>
- </a>
- $doxygenversion
- </li>
-
- <li class="footer">
- <a href="http://www.lufa-lib.org" title="LUFA Project Page">LUFA Project Page</a> | <a href="http://www.lufa-lib.org/support" title="LUFA Support List">Support Mailing List</a> | <a href="http://www.lufa-lib.org/donate" title="Donate to Support LUFA">Donate</a> | <a href="http://www.fourwalledcubicle.com" title="Four Walled Cubicle Website">Four Walled Cubicle</a> - LUFA, the Lightweight USB Framework for AVRs
- </li>
- </ul>
- </div>
-<!--END GENERATE_TREEVIEW-->
-<!--BEGIN !GENERATE_TREEVIEW-->
- <hr class="footer"/>
- <div class="footer">
- <span style="float: left;">
- $generatedby
- <a href="http://www.doxygen.org/index.html">
- <img class="footer" src="$relpath$doxygen.png" alt="doxygen"/>
- </a>
- $doxygenversion
- </span>
-
- <span style="margin-right: 20px; float: right;">
- <a href="http://www.lufa-lib.org" title="LUFA Project Page">LUFA Project Page</a> | <a href="http://www.lufa-lib.org/support" title="LUFA Support List">Support Mailing List</a> | <a href="http://www.lufa-lib.org/donate" title="Donate to Support LUFA">Donate</a> | <a href="http://www.fourwalledcubicle.com" title="Four Walled Cubicle Website">Four Walled Cubicle</a> - LUFA, the Lightweight USB Framework for AVRs
- </span>
- </div>
-<!--END !GENERATE_TREEVIEW-->
- </body>
-</html>
\ No newline at end of file diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Style/Style.css b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Style/Style.css deleted file mode 100644 index b0b8464be..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/Style/Style.css +++ /dev/null @@ -1,1123 +0,0 @@ -@media print
- {
- #top
- {
- display:none;
- }
-
- #side-nav
- {
- display:none;
- }
-
- #nav-path
- {
- display:none;
- }
-
- body
- {
- overflow:visible;
- }
-
- h1,h2,h3,h4,h5,h6
- {
- page-break-after:avoid;
- }
-
- .summary
- {
- display:none;
- }
-
- .memitem
- {
- page-break-inside:avoid;
- }
-
- #doc-content
- {
- display:inline;
- height:auto !important;
- margin-left:0 !important;
- overflow:inherit;
- width:auto !important;
- }
-
- .fragment
- {
- background-color: #FFFFFF !important;
- }
-}
-
-body,table,div,p,dl
-{
- font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif;
- font-size:13px;
- line-height:1.3;
-}
-
-div.contents p
-{
- padding-left:12px;
-}
-
-div.contents table.memberdecls,.paramname
-{
- font-family:Consolas, Monaco, courier, sans-serif;
- font-size:105%;
- padding-right:20px;
-}
-
-.title
-{
- font-size:150%;
- font-weight:bold;
- margin:10px 2px;
-}
-
-h1
-{
- font-size:25px;
- margin-bottom:10px;
-}
-
-h2
-{
- color:#42657B;
- font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif;
- font-size:17px;
-}
-
-h3
-{
- font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif;
- font-size:15px;
-}
-
-h4
-{
- font-family:Lucida Grande, Verdana, Geneva, Arial, sans-serif;
- font-size:13px;
-}
-
-dt
-{
- font-weight:bold;
-}
-
-div.multicol
-{
- -moz-column-count:3px;
- -moz-column-gap:1em;
- -webkit-column-count:3px;
- -webkit-column-gap:1em;
-}
-
-p.startli,p.startdd,p.starttd
-{
- margin-top:2px;
-}
-
-p.endli
-{
- margin-bottom:0;
-}
-
-p.enddd
-{
- margin-bottom:4px;
-}
-
-p.endtd
-{
- margin-bottom:2px;
-}
-
-caption
-{
- font-weight:bold;
-}
-
-span.legend
-{
- font-size:70%;
- text-align:center;
-}
-
-h3.version
-{
- font-size:90%;
- text-align:center;
-}
-
-div.qindex,div.navtab
-{
- background-color:#EAEFF7;
- border:1px solid #9EB3DC;
- text-align:center;
-}
-
-div.qindex,div.navpath
-{
- line-height:140%;
- width:100%;
-}
-
-div.navtab
-{
- margin-right:15px;
-}
-
-a
-{
- color:#355594;
- font-weight:normal;
- text-decoration:none;
-}
-
-.contents a:visited
-{
- color:#3D62AB;
-}
-
-a:hover
-{
- text-decoration:underline;
-}
-
-a.qindex
-{
- font-weight:bold;
-}
-
-a.qindexHL
-{
- background-color:#97ADD9;
- border:1px double #7F9BD1;
- color:#ffffff;
- font-weight:bold;
-}
-
-.contents a.qindexHL:visited
-{
- color:#ffffff;
-}
-
-a.el
-{
- font-weight:bold;
-}
-
-a.code,a.code:visited
-{
- color:#4665A2;
-}
-
-a.codeRef,a.codeRef:visited
-{
- color:#4665A2;
-}
-
-dl.el
-{
- margin-left:-1cm;
-}
-
-pre.fragment {
- border: 1px solid #C4CFE5;
- background-color: #FBFCFD;
- padding: 4px 6px;
- margin: 4px 8px 4px 2px;
- overflow: auto;
- word-wrap: break-word;
- font-size: 9pt;
- line-height: 125%;
- font-family: monospace, fixed;
- font-size: 105%;
-}
-
-div.fragment {
- padding: 4px;
- margin: 4px;
- background-color: #FBFCFD;
- border: 1px solid #C4CFE5;
-}
-
-div.line {
- font-family: monospace, fixed;
- font-size: 13px;
- min-height: 13px;
- line-height: 1.0;
- text-wrap: unrestricted;
- white-space: -moz-pre-wrap; /* Moz */
- white-space: -pre-wrap; /* Opera 4-6 */
- white-space: -o-pre-wrap; /* Opera 7 */
- white-space: pre-wrap; /* CSS3 */
- word-wrap: break-word; /* IE 5.5+ */
- text-indent: -53px;
- padding-left: 53px;
- padding-bottom: 0px;
- margin: 0px;
-}
-
-span.lineno {
- padding-right: 4px;
- text-align: right;
- border-right: 2px solid #0F0;
- background-color: #E8E8E8;
- white-space: pre;
-}
-span.lineno a {
- background-color: #D8D8D8;
-}
-
-span.lineno a:hover {
- background-color: #C8C8C8;
-}
-
-div.ah
-{
- -moz-border-radius:.5em;
- -moz-box-shadow:rgba(0, 0, 0, 0.15) 2px 2px 2px;
- -webkit-border-radius:.5em;
- -webkit-box-shadow:2px 2px 3px #999;
- background-color:black;
- background-image:0;
- border:solid thin #333;
- border-radius:0.5em;
- box-shadow:2px 2px 3px #999;
- color:#ffffff;
- font-weight:bold;
- margin-bottom:3px;
- margin-top:3px;
- padding:0.2em;
-}
-
-div.groupHeader
-{
- font-weight:bold;
- margin-left:16px;
- margin-top:12px;
-}
-
-div.groupText
-{
- font-style:italic;
- margin-left:16px;
-}
-
-body
-{
- background-color:white;
- color:black;
- margin:0;
-}
-
-div.contents
-{
- margin-left:8px;
- margin-right:8px;
- margin-top:10px;
-}
-
-td.indexkey
-{
- background-color:#EAEFF7;
- border:1px solid #C1CEE8;
- font-weight:bold;
- margin:2px 0;
- padding:2px 10px;
- vertical-align:top;
- white-space:nowrap;
-}
-
-td.indexvalue
-{
- background-color:#EAEFF7;
- border:1px solid #C1CEE8;
- margin:2px 0;
- padding:2px 10px;
-}
-
-tr.memlist
-{
- background-color:#EDF1F8;
-}
-
-p.formulaDsp
-{
- text-align:center;
-}
-
-img.formulaInl
-{
- vertical-align:middle;
-}
-
-div.center
-{
- margin-bottom:0;
- margin-top:0;
- padding:0;
- text-align:center;
-}
-
-div.center img
-{
- border:0;
-}
-
-address.footer
-{
- padding-right:12px;
- text-align:right;
-}
-
-img.footer
-{
- border:0;
- vertical-align:middle;
-}
-
-span.keyword
-{
- color:#008000;
-}
-
-span.keywordtype
-{
- color:#604020;
-}
-
-span.keywordflow
-{
- color:#e08000;
-}
-
-span.comment
-{
- color:#008000;
-}
-
-span.preprocessor
-{
- color:#806020;
-}
-
-span.stringliteral
-{
- color:#002080;
-}
-
-span.charliteral
-{
- color:#008080;
-}
-
-span.vhdldigit
-{
- color:#ff00ff;
-}
-
-span.vhdlchar
-{
- color:#000000;
-}
-
-span.vhdlkeyword
-{
- color:#700070;
-}
-
-span.vhdllogic
-{
- color:#ff0000;
-}
-
-blockquote
-{
- background-color:#F6F8FC;
- border-left:2px solid #97ADD9;
- margin:0 24px 0 4px;
- padding:0 12px 0 16px;
-}
-
-td.tiny
-{
- font-size:75%;
-}
-
-.dirtab
-{
- border:1px solid #9EB3DC;
- border-collapse:collapse;
- padding:4px;
-}
-
-th.dirtab
-{
- background:#EAEFF7;
- font-weight:bold;
-}
-
-hr
-{
- border:none;
- border-top:1px solid #4067B4;
- height:0;
-}
-
-hr.footer
-{
- height:1px;
-}
-
-table.memberdecls
-{
- border-spacing:0;
- padding:0;
-}
-
-.mdescLeft,.mdescRight,.memItemLeft,.memItemRight,.memTemplItemLeft,.memTemplItemRight,.memTemplParams
-{
- background-color:#F9FAFC;
- border:none;
- margin:4px;
- padding:1px 0 0 8px;
-}
-
-.mdescLeft,.mdescRight
-{
- color:#555;
- padding:0 8px 4px;
-}
-
-.memItemLeft,.memItemRight,.memTemplParams
-{
- border-top:1px solid #C1CEE8;
-}
-
-.memItemLeft,.memTemplItemLeft
-{
- white-space:nowrap;
-}
-
-.memItemRight
-{
- width:100%;
-}
-
-.memTemplParams
-{
- color:#3D62AB;
- white-space:nowrap;
-}
-
-.memtemplate
-{
- color:#3D62AB;
- font-size:80%;
- font-weight:normal;
- margin-left:9px;
-}
-
-.memnav
-{
- background-color:#EAEFF7;
- border:1px solid #9EB3DC;
- margin:2px 15px 2px 2px;
- padding:2px;
- text-align:center;
-}
-
-.mempage
-{
- width:100%;
-}
-
-.memitem
-{
- margin-bottom:10px;
- margin-right:5px;
- padding:0;
-}
-
-.memname
-{
- font-weight:bold;
- margin-left:6px;
- white-space:nowrap;
-}
-
-.memproto,dl.reflist dt
-{
- -moz-border-radius-topleft:8px;
- -moz-border-radius-topright:8px;
- -moz-box-shadow:rgba(0, 0, 0, 0.15) 5px 5px 5px;
- -webkit-border-top-left-radius:8px;
- -webkit-border-top-right-radius:8px;
- -webkit-box-shadow:5px 5px 5px rgba(0, 0, 0, 0.15);
- background-color:#E1E7F4;
- background-image:url('nav_f.png');
- background-repeat:repeat-x;
- border-left:1px solid #A3B7DE;
- border-right:1px solid #A3B7DE;
- border-top:1px solid #A3B7DE;
- border-top-left-radius:8px;
- border-top-right-radius:8px;
- box-shadow:5px 5px 5px rgba(0, 0, 0, 0.15);
- color:#20335A;
- font-weight:bold;
- padding:6px 0;
- text-shadow:0 1px 1px rgba(255, 255, 255, 0.9);
-}
-
-.memdoc,dl.reflist dd
-{
- -moz-border-radius-bottomleft:8px;
- -moz-border-radius-bottomright:8px;
- -moz-box-shadow:rgba(0, 0, 0, 0.15) 5px 5px 5px;
- -webkit-border-bottom-left-radius:8px;
- -webkit-border-bottom-right-radius:8px;
- -webkit-box-shadow:5px 5px 5px rgba(0, 0, 0, 0.15);
- background-color:#FBFCFD;
- background-image:0 color-stop(0.6,#FFFFFF), color-stop(0.60,#FFFFFF), color-stop(0.95,#F6F8FC), to(#EDF1F8));
- border-bottom:1px solid #A3B7DE;
- border-bottom-left-radius:8px;
- border-bottom-right-radius:8px;
- border-left:1px solid #A3B7DE;
- border-right:1px solid #A3B7DE;
- border-top-width:0;
- box-shadow:5px 5px 5px rgba(0, 0, 0, 0.15);
- padding:2px 5px;
-}
-
-dl.reflist dt
-{
- padding:5px;
-}
-
-dl.reflist dd
-{
- margin:0 0 10px;
- padding:5px;
-}
-
-.paramkey
-{
- text-align:right;
-}
-
-.paramtype
-{
- white-space:nowrap;
-}
-
-.paramname
-{
- color:#602020;
- white-space:nowrap;
-}
-
-.paramname em
-{
- font-style:normal;
-}
-
-.params,.retval,.exception,.tparams
-{
- border-spacing:6px 2px;
-}
-
-.params .paramname,.retval .paramname
-{
- font-weight:bold;
- vertical-align:top;
-}
-
-.params .paramtype
-{
- font-style:italic;
- vertical-align:top;
-}
-
-.params .paramdir
-{
- font-family:"courier new",courier,monospace;
- vertical-align:top;
-}
-
-.ftvtree
-{
- font-family:sans-serif;
- margin:0;
-}
-
-.directory
-{
- font-size:9pt;
- font-weight:bold;
- margin:5px;
-}
-
-.directory h3
-{
- font-size:11pt;
- margin:1em 0 0;
-}
-
-.directory > h3
-{
- margin-top:0;
-}
-
-.directory p
-{
- margin:0;
- white-space:nowrap;
-}
-
-.directory div
-{
- display:none;
- margin:0;
-}
-
-.directory img
-{
- vertical-align:-30%;
-}
-
-.directory-alt
-{
- font-size:100%;
- font-weight:bold;
-}
-
-.directory-alt h3
-{
- font-size:11pt;
- margin:1em 0 0;
-}
-
-.directory-alt > h3
-{
- margin-top:0;
-}
-
-.directory-alt p
-{
- margin:0;
- white-space:nowrap;
-}
-
-.directory-alt div
-{
- display:none;
- margin:0;
-}
-
-.directory-alt img
-{
- vertical-align:-30%;
-}
-
-div.dynheader
-{
- margin-top:8px;
-}
-
-address
-{
- color:#253B67;
- font-style:normal;
-}
-
-table.doxtable
-{
- border-collapse:collapse;
- margin-bottom:4px;
- margin-top:4px;
-}
-
-table.doxtable td,table.doxtable th
-{
- border:1px solid #273F6D;
- padding:3px 7px 2px;
-}
-
-table.doxtable th
-{
- background-color:#304D86;
- color:#FFFFFF;
- font-size:110%;
- padding-bottom:4px;
- padding-top:5px;
-}
-
-table.fieldtable
-{
- -moz-border-radius:4px;
- -moz-box-shadow:rgba(0, 0, 0, 0.15) 2px 2px 2px;
- -webkit-border-radius:4px;
- -webkit-box-shadow:2px 2px 2px rgba(0, 0, 0, 0.15);
- border:1px solid #A3B7DE;
- border-radius:4px;
- border-spacing:0;
- box-shadow:2px 2px 2px rgba(0, 0, 0, 0.15);
- margin-bottom:10px;
- width:100%;
-}
-
-.fieldtable td,.fieldtable th
-{
- padding:3px 7px 2px;
-}
-
-.fieldtable td.fieldtype,.fieldtable td.fieldname
-{
- border-bottom:1px solid #A3B7DE;
- border-right:1px solid #A3B7DE;
- vertical-align:top;
- white-space:nowrap;
-}
-
-.fieldtable td.fielddoc
-{
- border-bottom:1px solid #A3B7DE;
- width:100%;
-}
-
-.fieldtable tr:last-child td
-{
- border-bottom:none;
-}
-
-.fieldtable th
-{
- -moz-border-radius-topleft:4px;
- -moz-border-radius-topright:4px;
- -webkit-border-top-left-radius:4px;
- -webkit-border-top-right-radius:4px;
- background-color:#E1E7F4;
- background-image:url('nav_f.png');
- background-repeat:repeat-x;
- border-bottom:1px solid #A3B7DE;
- border-top-left-radius:4px;
- border-top-right-radius:4px;
- color:#20335A;
- font-size:90%;
- padding-bottom:4px;
- padding-top:5px;
- text-align:left;
-}
-
-.tabsearch
-{
- background-image:url('tab_b.png');
- font-size:13px;
- height:36px;
- left:10px;
- overflow:hidden;
- top:0;
- z-index:101;
-}
-
-.navpath ul
-{
- background-image:url('tab_b.png');
- background-repeat:repeat-x;
- border:solid 1px #BFCCE8;
- color:#839ED2;
- font-size:11px;
- height:30px;
- line-height:30px;
- margin:0;
- overflow:hidden;
- padding:0;
-}
-
-.navpath li
-{
- background-image:url('bc_s.png');
- background-position:right;
- background-repeat:no-repeat;
- color:#2F4B83;
- float:left;
- list-style-type:none;
- padding-left:10px;
- padding-right:15px;
-}
-
-.navpath li.navelem a
-{
- display:block;
- height:32px;
- outline:none;
- text-decoration:none;
-}
-
-.navpath li.navelem a:hover
-{
- color:#6081C5;
-}
-
-.navpath li.footer
-{
- background-image:none;
- background-position:right;
- background-repeat:no-repeat;
- color:#2F4B83;
- float:right;
- font-size:8pt;
- list-style-type:none;
- padding-left:10px;
- padding-right:15px;
-}
-
-div.summary
-{
- float:right;
- font-size:8pt;
- padding-right:5px;
- text-align:right;
- width:50%;
-}
-
-div.summary a
-{
- white-space:nowrap;
-}
-
-div.ingroups
-{
- font-size:8pt;
- margin-left:5px;
- padding-left:5px;
- text-align:left;
- width:50%;
-}
-
-div.ingroups a
-{
- white-space:nowrap;
-}
-
-div.header
-{
- background-color:#F9FAFC;
- background-image:url('nav_h.png');
- background-repeat:repeat-x;
- border-bottom:1px solid #C1CEE8;
- margin:0;
-}
-
-div.headertitle
-{
- padding:5px 5px 5px 7px;
-}
-
-dl
-{
- padding:0 0 0 10px;
-}
-
-dl.section
-{
- border-left:4px solid;
- padding:0 0 0 6px;
-}
-
-dl.note
-{
- border-color:#D0C000;
-}
-
-dl.warning,dl.attention
-{
- border-color:#FF0000;
-}
-
-dl.pre,dl.post,dl.invariant
-{
- border-color:#00D000;
-}
-
-dl.deprecated
-{
- border-color:#505050;
-}
-
-dl.todo
-{
- border-color:#00C0E0;
-}
-
-dl.test
-{
- border-color:#3030E0;
-}
-
-dl.bug
-{
- border-color:#C08050;
-}
-
-dl.section dd
-{
- margin-bottom:6px;
-}
-
-#projectlogo
-{
- border-collapse:separate;
- text-align:center;
- vertical-align:bottom;
- padding-left: 20px;
-}
-
-#projectlogo img
-{
- border:0 none;
-}
-
-#projectname
-{
- font:280% Arial, sans-serif;
- margin:0;
- padding-left:20px;
-}
-
-#projectbrief
-{
- font:120% Tahoma, Arial, sans-serif;
- margin:0;
- padding:0;
-}
-
-#projectnumber:before
-{
- content:"Version ";
-}
-
-#projectnumber
-{
- font:50% Tahoma, Arial, sans-serif;
- margin:0;
- padding:0;
-}
-
-#titlearea
-{
- margin:0;
- padding:0;
- width:100%;
- background-color:#E1E7F4;
- background-image:url('nav_f.png');
- background-repeat:repeat-x;
- color:#20335A;
- font-weight:bold;
- text-shadow:0 1px 1px rgba(255, 255, 255, 0.9);
-}
-
-.image
-{
- text-align:center;
-}
-
-.dotgraph
-{
- text-align:center;
-}
-
-.mscgraph
-{
- text-align:center;
-}
-
-.caption
-{
- font-weight:bold;
-}
-
-div.zoom
-{
- border:1px solid #8AA3D4;
-}
-
-dl.citelist
-{
- margin-bottom:50px;
-}
-
-dl.citelist dt
-{
- color:#2C477C;
- float:left;
- font-weight:bold;
- margin-right:10px;
- padding:5px;
-}
-
-dl.citelist dd
-{
- margin:2px 0;
- padding:5px 0;
-}
-
-div.toc
-{
- background-color:#F4F6FB;
- border:1px solid #D6DFF0;
- border-radius:7px 7px 7px 7px;
- float:right;
- height:auto;
- margin:0 20px 10px 10px;
- padding:14px 25px;
- width:200px;
-}
-
-div.toc li
-{
- background:url("bdwn.png") no-repeat scroll 0 5px transparent;
- font:10px/1.2 Verdana,DejaVu Sans,Geneva,sans-serif;
- margin-top:5px;
- padding-left:10px;
- padding-top:2px;
-}
-
-div.toc h3
-{
- border-bottom:0 none;
- color:#3D62AB;
- font:bold 12px/1.2 Arial,FreeSans,sans-serif;
- margin:0;
-}
-
-div.toc ul
-{
- border:medium none;
- list-style:none outside none;
- padding:0;
-}
-
-div.toc li.level1
-{
- margin-left:0;
-}
-
-div.toc li.level2
-{
- margin-left:15px;
-}
-
-div.toc li.level3
-{
- margin-left:30px;
-}
-
-div.toc li.level4
-{
- margin-left:45px;
-}
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/VIDAndPIDValues.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/VIDAndPIDValues.txt deleted file mode 100644 index ae9c7d44b..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/VIDAndPIDValues.txt +++ /dev/null @@ -1,424 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_VIDPID VID and PID values
- *
- * \section Sec_VIDPID_Allocations VID and PID Allocations
- * The LUFA library uses VID/PID combinations generously donated by Atmel. The following VID/PID combinations
- * are used within the LUFA demos, and thus may be re-used by derivations of each demo. Free PID values may be
- * used by future LUFA demo projects.
- *
- * <b>These VID/PID values should not be used in commercial designs under any circumstances.</b> Private projects
- * may use the following values freely, but must accept any collisions due to other LUFA derived private projects
- * sharing identical values. It is suggested that private projects using interfaces compatible with existing
- * demos share the same VID/PID value.
- *
- * <table>
- *
- * <tr>
- * <td>
- * <b>VID</b>
- * </td>
- * <td>
- * <b>PID</b>
- * </td>
- * <td>
- * <b>Usage</b>
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2040
- * </td>
- * <td>
- * Test VID/PID (See below)
- * </td>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2041
- * </td>
- * <td>
- * Mouse Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2042
- * </td>
- * <td>
- * Keyboard Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2043
- * </td>
- * <td>
- * Joystick Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2044
- * </td>
- * <td>
- * CDC Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2045
- * </td>
- * <td>
- * Mass Storage Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2046
- * </td>
- * <td>
- * Audio Output Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2047
- * </td>
- * <td>
- * Audio Input Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2048
- * </td>
- * <td>
- * MIDI Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2049
- * </td>
- * <td>
- * MagStripe Project
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x204A
- * </td>
- * <td>
- * CDC Bootloader
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x204B
- * </td>
- * <td>
- * USB to Serial Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x204C
- * </td>
- * <td>
- * RNDIS Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x204D
- * </td>
- * <td>
- * Combined Keyboard and Mouse Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x204E
- * </td>
- * <td>
- * Dual CDC Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x204F
- * </td>
- * <td>
- * Generic HID Demo Application
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2060
- * </td>
- * <td>
- * Benito Programmer Project
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2061
- * </td>
- * <td>
- * Combined Mass Storage and Keyboard Demo
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2062
- * </td>
- * <td>
- * Combined CDC and Mouse Demo
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2063
- * </td>
- * <td>
- * Mass Storage/HID Interface Datalogger Project
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2064
- * </td>
- * <td>
- * Interfaceless Control-Only LUFA Devices
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2065
- * </td>
- * <td>
- * Test and Measurement Demo
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2066
- * </td>
- * <td>
- * Multiple Report Keyboard/Mouse HID Demo
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2067
- * </td>
- * <td>
- * HID Class Bootloader
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2068
- * </td>
- * <td>
- * Virtual Serial/Mass Storage Demo
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x2069
- * </td>
- * <td>
- * Webserver Project
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x206A
- * </td>
- * <td>
- * Media Control Project
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x206B
- * </td>
- * <td>
- * <i>Currently Unallocated</i>
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x206C
- * </td>
- * <td>
- * <i>Currently Unallocated</i>
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x206D
- * </td>
- * <td>
- * <i>Currently Unallocated</i>
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x206E
- * </td>
- * <td>
- * <i>Currently Unallocated</i>
- * </td>
- * </tr>
- *
- * <tr>
- * <td>
- * 0x03EB
- * </td>
- * <td>
- * 0x206F
- * </td>
- * <td>
- * <i>Currently Unallocated</i>
- * </td>
- * </tr>
- *
- * </table>
- *
- * \section Sec_Test_VIDPID The Test VID/PID Combination
- * For use in testing of LUFA powered devices during development only, by non-commercial entities.
- * All devices must accept collisions on this VID/PID range (from other in-development LUFA devices)
- * to be resolved by using a unique release number in the Device Descriptor. No devices using this
- * VID/PID combination may be released to the general public.
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/WritingBoardDrivers.txt b/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/WritingBoardDrivers.txt deleted file mode 100644 index 1b3326907..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/DoxygenPages/WritingBoardDrivers.txt +++ /dev/null @@ -1,27 +0,0 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \page Page_WritingBoardDrivers Writing LUFA Board Drivers
- *
- * LUFA ships with several basic pre-made board drivers, to control hardware present on the supported board
- * hardware - such as Dataflash ICs, LEDs, Joysticks, or other hardware peripherals. When compiling an application
- * which makes use of one or more board drivers located in LUFA/Drivers/Board, you must also indicate what board
- * hardware you are using in your project makefile. This is done by defining the BOARD macro using the -D switch
- * passed to the compiler, with a constant of BOARD_{Name}. For example <b>-DBOARD=BOARD_USBKEY</b> instructs the
- * compiler to use the USBKEY board hardware drivers.
- *
- * If your application does not use *any* board level drivers, you can omit the definition of the BOARD macro.
- * However, some users may wish to write their own custom board hardware drivers which are to remain compatible
- * with the LUFA hardware API. To do this, the BOARD macro should be defined to the value BOARD_USER. This indicates
- * that the board level drivers should be located in a folder named "Board" located inside the application's folder.
- *
- * When used, the driver stub files located in the LUFA/CodeTemplates/DriverStubs folder should be copied to the user
- * Board/ directory, and fleshed out to include the values and code needed to control the custom board hardware. Once
- * done, the existing LUFA board level APIs (accessed in the regular LUFA/Drivers/Board/ folder) will redirect to the
- * user board drivers, maintaining code compatibility and allowing for a different board to be selected through the
- * project makefile with no code changes.
- */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h deleted file mode 100644 index c18054f82..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/ADAFRUITU4/LEDs.h +++ /dev/null @@ -1,135 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Adafruit U4 Breakout board.
- * \copydetails Group_LEDs_ADAFRUITU4
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_ADAFRUITU4 ADAFRUITU4
- * \brief Board specific LED driver header for the Adafruit U4 Breakout board.
- *
- * Board specific LED driver header for the Adafruit U4 Breakout board (http://ladyada.net/products/atmega32u4breakout).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTE.6</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_ADAFRUITU4_H__
-#define __LEDS_ADAFRUITU4_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 6)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for the none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRE |= LEDS_ALL_LEDS;
- PORTE &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRE &= ~LEDS_ALL_LEDS;
- PORTE &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTE |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTE &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTE = ((PORTE & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTE = ((PORTE & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINE = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTE & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h deleted file mode 100644 index 3470890b6..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Atmel ATAVRUSBRF01.
- * \copydetails Group_Buttons_ATAVRUSBRF01
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_ATAVRUSBRF01 ATAVRUSBRF01
- * \brief Board specific Buttons driver header for the Atmel ATAVRUSBRF01.
- *
- * Board specific Buttons driver header for the Atmel ATAVRUSBRF01.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_ATAVRUSBRF01_H__
-#define __BUTTONS_ATAVRUSBRF01_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h deleted file mode 100644 index 17b427155..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/ATAVRUSBRF01/LEDs.h +++ /dev/null @@ -1,139 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel ATAVRUSBRF01.
- * \copydetails Group_LEDs_ATAVRUSBRF01
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_ATAVRUSBRF01 ATAVRUSBRF01
- * \brief Board specific LED driver header for the Atmel ATAVRUSBRF01.
- *
- * Board specific LED driver header for the Atmel ATAVRUSBRF01.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>RX LED</td><td>High</td><td>PORTD.0</td></tr>
- * <tr><td>LEDS_LED2</td><td>Red</td><td>TX LED</td><td>High</td><td>PORTD.1</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_ATAVRUSBRF01_H__
-#define __LEDS_ATAVRUSBRF01_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 0)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 1)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD |= (LEDMask & LEDS_ALL_LEDS);
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~(LEDMask & LEDS_ALL_LEDS);
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = (PORTD & ~LEDS_ALL_LEDS) | (LEDMask & LEDS_ALL_LEDS);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h deleted file mode 100644 index cecaca07e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BENITO/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Tempusdictum Benito.
- * \copydetails Group_Buttons_BENITO
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_BENITO BENITO
- * \brief Board specific Buttons driver header for the Tempusdictum Benito.
- *
- * Board specific Buttons driver header for the Tempusdictum Benito (http://dorkbotpdx.org/wiki/benito).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_BENITO_H__
-#define __BUTTONS_BENITO_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h deleted file mode 100644 index dc3d85df2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BENITO/LEDs.h +++ /dev/null @@ -1,139 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Tempusdictum Benito.
- * \copydetails Group_LEDs_BENITO
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_BENITO BENITO
- * \brief Board specific LED driver header for the Tempusdictum Benito.
- *
- * Board specific LED driver header for the Tempusdictum Benito (http://dorkbotpdx.org/wiki/benito).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>TX LED</td><td>Low</td><td>PORTC.7</td></tr>
- * <tr><td>LEDS_LED2</td><td>Red</td><td>RX LED</td><td>Low</td><td>PORTC.6</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_BENITO_H__
-#define __LEDS_BENITO_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 7)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 6)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRC |= LEDS_ALL_LEDS;
- PORTC |= LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRC &= ~LEDS_ALL_LEDS;
- PORTC &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTC &= ~LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTC |= LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTC = ((PORTC | LEDS_ALL_LEDS) & ~LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTC = ((PORTC | LEDMask) & ~ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINC = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTC & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h deleted file mode 100644 index d003680da..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BIGMULTIO/LEDs.h +++ /dev/null @@ -1,161 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Bitwizard Big-Multio.
- * \copydetails Group_LEDs_BIGMULTIO
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_BIGMULTIO BIGMULTIO
- * \brief Board specific LED driver header for the Bitwizard Big-Multio.
- *
- * Board specific LED driver header for the Bitwizard Big-Multio (http://www.bitwizard.nl/wiki/index.php/Usbbigmultio).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Unknown</td><td>LED0</td><td>High</td><td>PORTF.6</td></tr>
- * <tr><td>LEDS_LED2</td><td>Unknown</td><td>LED1</td><td>High</td><td>PORTF.7</td></tr>
- * <tr><td>LEDS_LED3</td><td>Unknown</td><td>LED2</td><td>High</td><td>PORTE.2</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_BIGMULTIO_H__
-#define __LEDS_BIGMULTIO_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define LEDS_PORTF_LEDS (LEDS_LED1 | LEDS_LED2)
- #define LEDS_PORTE_LEDS LEDS_LED3
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 6)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 7)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED3 (1 << 2)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRF |= LEDS_PORTF_LEDS;
- DDRE |= LEDS_PORTE_LEDS;
-
- PORTF &= ~LEDS_PORTF_LEDS;
- PORTE &= ~LEDS_PORTE_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRF &= ~LEDS_PORTF_LEDS;
- DDRE &= ~LEDS_PORTE_LEDS;
-
- PORTF &= ~LEDS_PORTF_LEDS;
- PORTE &= ~LEDS_PORTE_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTF |= (LEDMask & LEDS_PORTF_LEDS);
- PORTE |= (LEDMask & LEDS_PORTE_LEDS);
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTF &= ~(LEDMask & LEDS_PORTF_LEDS);
- PORTE &= ~(LEDMask & LEDS_PORTE_LEDS);
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTF = (PORTF & ~LEDS_PORTF_LEDS) | (LEDMask & LEDS_PORTF_LEDS);
- PORTE = (PORTE & ~LEDS_PORTE_LEDS) | (LEDMask & LEDS_PORTE_LEDS);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTF = (PORTF & ~(LEDMask & LEDS_PORTF_LEDS)) | (ActiveMask & LEDS_PORTF_LEDS);
- PORTE = (PORTE & ~(LEDMask & LEDS_PORTE_LEDS)) | (ActiveMask & LEDS_PORTE_LEDS);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINF = (LEDMask & LEDS_PORTF_LEDS);
- PINE = (LEDMask & LEDS_PORTE_LEDS);
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return ((PORTF & LEDS_PORTF_LEDS) | (PORTE & LEDS_PORTE_LEDS));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h deleted file mode 100644 index 778bc321e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BLACKCAT/LEDs.h +++ /dev/null @@ -1,139 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the BLACKCAT USB JTAG.
- * \copydetails Group_LEDs_BLACKCAT
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_BLACKCAT BLACKCAT
- * \brief Board specific LED driver header for the BLACKCAT USB JTAG.
- *
- * Board specific LED driver header for the TCNISO Blackcat USB JTAG (http://www.embeddedcomputers.net/products/BlackcatUSB).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Unknown</td><td>LED0</td><td>High</td><td>PORTD.6</td></tr>
- * <tr><td>LEDS_LED2</td><td>Unknown</td><td>LED1</td><td>High</td><td>PORTD.3</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_BLACKCAT_H__
-#define __LEDS_BLACKCAT_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 6)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 3)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUI/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUI/LEDs.h deleted file mode 100644 index cc0c01c8b..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUI/LEDs.h +++ /dev/null @@ -1,143 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Busware BUI.
- * \copydetails Group_LEDs_BUI
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_BUI BUI
- * \brief Board specific LED driver header for the Busware BUI.
- *
- * Board specific LED driver header for the Busware BUI (http://www.busware.de/tiki-index.php?page=BUI).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Red</td><td>RGB LED</td><td>High</td><td>PORTC.2</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>RGB LED</td><td>High</td><td>PORTC.3</td></tr>
- * <tr><td>LEDS_LED3</td><td>Blue</td><td>RGB LED</td><td>High</td><td>PORTC.4</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_BUI_H__
-#define __LEDS_BUI_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
-/* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 2)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 3)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 4)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRC |= LEDS_ALL_LEDS;
- PORTC &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRC &= ~LEDS_ALL_LEDS;
- PORTC &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTC |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTC &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTC = (PORTC & ~LEDS_ALL_LEDS) | LEDMask;
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTC = (PORTC & ~LEDMask) | ActiveMask;
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINC = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTC & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h deleted file mode 100644 index 96d1eee6d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUMBLEB/Buttons.h +++ /dev/null @@ -1,105 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Fletchtronics BUMBLEB.
- * \copydetails Group_Buttons_BUMBLEB
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_BUMBLEB BUMBLEB
- * \brief Board specific Buttons driver header for the Fletchtronics BUMBLEB.
- *
- * Board specific buttons driver header for the Fletchtronics BUMBLEB (http://fletchtronics.net/bumble-b). The BUMBLEB
- * third-party board does not include any on-board peripherals, but does have an officially recommended external peripheral
- * layout for buttons, LEDs and a Joystick.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_BUMBLEB_H__
-#define __BUTTONS_BUMBLEB_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h deleted file mode 100644 index 92c7a2e72..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h +++ /dev/null @@ -1,123 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific joystick driver header for the Fletchtronics BUMBLEB.
- * \copydetails Group_Joystick_BUMBLEB
- *
- * \note This file should not be included directly. It is automatically included as needed by the joystick driver
- * dispatch header located in LUFA/Drivers/Board/Joystick.h.
- */
-
-/** \ingroup Group_Joystick
- * \defgroup Group_Joystick_BUMBLEB BUMBLEB
- * \brief Board specific joystick driver header for the Fletchtronics BUMBLEB.
- *
- * Board specific joystick driver header for the Fletchtronics BUMBLEB (http://fletchtronics.net/bumble-b). The BUMBLEB
- * third-party board does not include any on-board peripherals, but does have an officially recommended external peripheral
- * layout for buttons, LEDs and a Joystick.
- *
- * <table>
- * <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
- * <tr><td>PORTD.2</td><td>PORTD.3</td><td>PORTD.0</td><td>PORTD.1</td><td>PORTD.4</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __JOYSTICK_BUMBLEB_H__
-#define __JOYSTICK_BUMBLEB_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_JOYSTICK_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define JOY_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4))
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask for the joystick being pushed in the left direction. */
- #define JOY_LEFT (1 << 2)
-
- /** Mask for the joystick being pushed in the upward direction. */
- #define JOY_UP (1 << 3)
-
- /** Mask for the joystick being pushed in the right direction. */
- #define JOY_RIGHT (1 << 0)
-
- /** Mask for the joystick being pushed in the downward direction. */
- #define JOY_DOWN (1 << 1)
-
- /** Mask for the joystick being pushed inward. */
- #define JOY_PRESS (1 << 4)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Joystick_Init(void)
- {
- DDRD &= ~JOY_MASK;
- PORTD |= JOY_MASK;
- }
-
- static inline void Joystick_Disable(void)
- {
- DDRD &= ~JOY_MASK;
- PORTD &= ~JOY_MASK;
- }
-
- static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Joystick_GetStatus(void)
- {
- return (uint8_t)(~PIND & JOY_MASK);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h deleted file mode 100644 index dff069785..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/BUMBLEB/LEDs.h +++ /dev/null @@ -1,149 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Fletchtronics BUMBLEB.
- * \copydetails Group_LEDs_BUMBLEB
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_BUMBLEB BUMBLEB
- * \brief Board specific LED driver header for the Fletchtronics BUMBLEB.
- *
- * Board specific LED driver header for the Fletchtronics BUMBLEB (http://fletchtronics.net/bumble-b). The BUMBLEB
- * third-party board does not include any on-board peripherals, but does have an officially recommended external
- * peripheral layout for buttons, LEDs and a Joystick.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.4</td></tr>
- * <tr><td>LEDS_LED2</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.5</td></tr>
- * <tr><td>LEDS_LED3</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.6</td></tr>
- * <tr><td>LEDS_LED4</td><td>N/A</td><td>User Supplied</td><td>High</td><td>PORTB.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_BUMBLEB_H__
-#define __LEDS_BUMBLEB_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 5)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 6)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 (1 << 7)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRB |= LEDS_ALL_LEDS;
- PORTB &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRB &= ~LEDS_ALL_LEDS;
- PORTB &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LedMask)
- {
- PORTB |= LedMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LedMask)
- {
- PORTB &= ~LedMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LedMask)
- {
- PORTB = ((PORTB & ~LEDS_ALL_LEDS) | LedMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LedMask,
- const uint8_t ActiveMask)
- {
- PORTB = ((PORTB & ~LedMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINB = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTB & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h deleted file mode 100644 index 6f6933b0d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Busware CULV3.
- * \copydetails Group_LEDs_CULV3
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_CULV3 CULV3
- * \brief Board specific Buttons driver header for the Busware CULV3.
- *
- * Board specific Buttons driver header for the Busware CUL V3 (http://busware.de/tiki-index.php?page=CUL).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_CULV3_H__
-#define __BUTTONS_CULV3_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 2)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PINE & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h deleted file mode 100644 index 86700d147..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/CULV3/LEDs.h +++ /dev/null @@ -1,135 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Busware CUL V3.
- * \copydetails Group_LEDs_CULV3
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_CULV3 CULV3
- * \brief Board specific LED driver header for the Busware CUL V3.
- *
- * Board specific LED driver header for the Busware CUL V3 (http://busware.de/tiki-index.php?page=CUL).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Yellow</td><td>General Indicator</td><td>High</td><td>PORTE.6</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_CULV3_H__
-#define __LEDS_CULV3_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 6)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for the none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRE |= LEDS_ALL_LEDS;
- PORTE &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRE &= ~LEDS_ALL_LEDS;
- PORTE &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTE |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTE &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTE = ((PORTE & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTE = ((PORTE & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINE = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTE & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/DUCE/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/DUCE/LEDs.h deleted file mode 100644 index 0d31b481c..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/DUCE/LEDs.h +++ /dev/null @@ -1,147 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the DorkbotPDX Duce.
- * \copydetails Group_LEDs_DUCE
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_DUCE DUCE
- * \brief Board specific LED driver header for the DorkbotPDX Duce.
- *
- * Board specific LED driver header for the DorkbotPDX Duce (http://dorkbotpdx.org/wiki/duce).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Red</td><td>Bicolor Indicator 1</td><td>High</td><td>PORTC.4</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>Bicolor Indicator 1</td><td>High</td><td>PORTC.5</td></tr>
- * <tr><td>LEDS_LED3</td><td>Red</td><td>Bicolor Indicator 2</td><td>High</td><td>PORTC.6</td></tr>
- * <tr><td>LEDS_LED4</td><td>Green</td><td>Bicolor Indicator 2</td><td>High</td><td>PORTC.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_DUCE_H__
-#define __LEDS_DUCE_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 5)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 6)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 (1 << 7)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRC |= LEDS_ALL_LEDS;
- PORTC &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRC &= ~LEDS_ALL_LEDS;
- PORTC &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTC |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTC &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTC = ((PORTC & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTC = ((PORTC & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINC = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTC & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h deleted file mode 100644 index 82cb204eb..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Atmel EVK527.
- * \copydetails Group_Buttons_EVK527
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_EVK527 EVK527
- * \brief Board specific Buttons driver header for the Atmel EVK527.
- *
- * Board specific Buttons driver header for the Atmel EVK527.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_EVK527_H__
-#define __BUTTONS_EVK527_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 2)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PINE & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h deleted file mode 100644 index 53af74186..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h +++ /dev/null @@ -1,220 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Dataflash driver header for the Atmel EVK527.
- * \copydetails Group_Dataflash_EVK527
- *
- * \note This file should not be included directly. It is automatically included as needed by the dataflash driver
- * dispatch header located in LUFA/Drivers/Board/Dataflash.h.
- */
-
-/** \ingroup Group_Dataflash
- * \defgroup Group_Dataflash_EVK527 EVK527
- * \brief Board specific Dataflash driver header for the Atmel EVK527.
- *
- * Board specific Dataflash driver header for the Atmel EVK527.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
- * <tr><td>DATAFLASH_CHIP1</td><td>AT45DB321C (4MB)</td><td>PORTE.6</td><td>SPI0</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __DATAFLASH_EVK527_H__
-#define __DATAFLASH_EVK527_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../../../Misc/AT45DB321C.h"
- #include "../../../Peripheral/SPI.h"
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_DATAFLASH_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define DATAFLASH_CHIPCS_MASK (1 << 6)
- #define DATAFLASH_CHIPCS_DDR DDRE
- #define DATAFLASH_CHIPCS_PORT PORTE
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Constant indicating the total number of dataflash ICs mounted on the selected board. */
- #define DATAFLASH_TOTALCHIPS 1
-
- /** Mask for no dataflash chip selected. */
- #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK
-
- /** Mask for the first dataflash chip selected. */
- #define DATAFLASH_CHIP1 0
-
- /** Internal main memory page size for the board's dataflash IC. */
- #define DATAFLASH_PAGE_SIZE 512
-
- /** Total number of pages inside the board's dataflash IC. */
- #define DATAFLASH_PAGES 8192
-
- /* Inline Functions: */
- /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
- * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
- */
- static inline void Dataflash_Init(void)
- {
- DATAFLASH_CHIPCS_DDR |= DATAFLASH_CHIPCS_MASK;
- DATAFLASH_CHIPCS_PORT |= DATAFLASH_CHIPCS_MASK;
- }
-
- /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
- {
- return SPI_TransferByte(Byte);
- }
-
- /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- */
- static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SendByte(const uint8_t Byte)
- {
- SPI_SendByte(Byte);
- }
-
- /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_ReceiveByte(void)
- {
- return SPI_ReceiveByte();
- }
-
- /** Determines the currently selected dataflash chip.
- *
- * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
- * or a DATAFLASH_CHIPn mask (where n is the chip number).
- */
- static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_GetSelectedChip(void)
- {
- return (DATAFLASH_CHIPCS_PORT & DATAFLASH_CHIPCS_MASK);
- }
-
- /** Selects the given dataflash chip.
- *
- * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of DATAFLASH_CHIPn mask (where n is
- * the chip number).
- */
- static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SelectChip(const uint8_t ChipMask)
- {
- DATAFLASH_CHIPCS_PORT = ((DATAFLASH_CHIPCS_PORT & ~DATAFLASH_CHIPCS_MASK) | ChipMask);
- }
-
- /** Deselects the current dataflash chip, so that no dataflash is selected. */
- static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_DeselectChip(void)
- {
- Dataflash_SelectChip(DATAFLASH_NO_CHIP);
- }
-
- /** Selects a dataflash IC from the given page number, which should range from 0 to
- * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
- * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside
- * the total number of pages contained in the boards dataflash ICs, all dataflash ICs
- * are deselected.
- *
- * \param[in] PageAddress Address of the page to manipulate, ranging from
- * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
- */
- static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
- {
- Dataflash_DeselectChip();
-
- if (PageAddress >= DATAFLASH_PAGES)
- return;
-
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- }
-
- /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive
- * a new command.
- */
- static inline void Dataflash_ToggleSelectedChipCS(void)
- {
- uint8_t SelectedChipMask = Dataflash_GetSelectedChip();
-
- Dataflash_DeselectChip();
- Dataflash_SelectChip(SelectedChipMask);
- }
-
- /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main
- * memory page program or main memory to buffer transfer.
- */
- static inline void Dataflash_WaitWhileBusy(void)
- {
- Dataflash_ToggleSelectedChipCS();
- Dataflash_SendByte(DF_CMD_GETSTATUS);
- while (!(Dataflash_ReceiveByte() & DF_STATUS_READY));
- Dataflash_ToggleSelectedChipCS();
- }
-
- /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
- * dataflash commands which require a complete 24-bit address.
- *
- * \param[in] PageAddress Page address within the selected dataflash IC
- * \param[in] BufferByte Address within the dataflash's buffer
- */
- static inline void Dataflash_SendAddressBytes(uint16_t PageAddress,
- const uint16_t BufferByte)
- {
- Dataflash_SendByte(PageAddress >> 5);
- Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8));
- Dataflash_SendByte(BufferByte);
- }
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h deleted file mode 100644 index 266b14907..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/Joystick.h +++ /dev/null @@ -1,130 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific joystick driver header for the Atmel EVK527.
- * \copydetails Group_Joystick_EVK527
- *
- * \note This file should not be included directly. It is automatically included as needed by the joystick driver
- * dispatch header located in LUFA/Drivers/Board/Joystick.h.
- */
-
-/** \ingroup Group_Joystick
- * \defgroup Group_Joystick_EVK527 EVK527
- * \brief Board specific joystick driver header for the Atmel EVK527.
- *
- * Board specific joystick driver header for the Atmel EVK527.
- *
- * <table>
- * <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
- * <tr><td>PORTF.4</td><td>PORTF.5</td><td>PORTF.7</td><td>PORTC.6</td><td>PORTF.6</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __JOYSTICK_EVK527_H__
-#define __JOYSTICK_EVK527_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_JOYSTICK_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define JOY_FMASK ((1 << 4) | (1 << 5) | (1 << 6) | (1 << 7))
- #define JOY_CMASK (1 << 6)
-
- #define JOY_PORTC_MASK_SHIFT 3
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask for the joystick being pushed in the left direction. */
- #define JOY_LEFT (1 << 4)
-
- /** Mask for the joystick being pushed in the right direction. */
- #define JOY_RIGHT (1 << 7)
-
- /** Mask for the joystick being pushed in the upward direction. */
- #define JOY_UP (1 << 5)
-
- /** Mask for the joystick being pushed in the downward direction. */
- #define JOY_DOWN ((1 << 6) >> JOY_PORTC_MASK_SHIFT)
-
- /** Mask for the joystick being pushed inward. */
- #define JOY_PRESS (1 << 6)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Joystick_Init(void)
- {
- DDRF &= ~JOY_FMASK;
- DDRC &= ~JOY_CMASK;
-
- PORTF |= JOY_FMASK;
- PORTC |= JOY_CMASK;
- }
-
- static inline void Joystick_Disable(void)
- {
- DDRF &= ~JOY_FMASK;
- DDRC &= ~JOY_CMASK;
-
- PORTF &= ~JOY_FMASK;
- PORTC &= ~JOY_CMASK;
- }
-
- static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Joystick_GetStatus(void)
- {
- return (((uint8_t)~PINF & JOY_FMASK) | (((uint8_t)~PINC & JOY_CMASK) >> JOY_PORTC_MASK_SHIFT));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h deleted file mode 100644 index 58483a9ba..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/EVK527/LEDs.h +++ /dev/null @@ -1,143 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel EVK527.
- * \copydetails Group_LEDs_EVK527
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_EVK527 EVK527
- * \brief Board specific LED driver header for the Atmel EVK527.
- *
- * Board specific LED driver header for the Atmel EVK527.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.5</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.6</td></tr>
- * <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_EVK527_H__
-#define __LEDS_EVK527_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 5)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 6)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 7)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h deleted file mode 100644 index 67783ca2b..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/JMDBU2/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Mattairtech JM-DB-U2.
- * \copydetails Group_Buttons_JMDBU2
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_JMDBU2 JMDBU2
- * \brief Board specific Buttons driver header for the Mattairtech JM-DB-U2.
- *
- * Board specific Buttons driver header for the Mattairtech JM-DB-U2 (http://u2.mattair.net/index.html).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_JMDBU2_H__
-#define __BUTTONS_JMDBU2_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h deleted file mode 100644 index d64cdad6d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/JMDBU2/LEDs.h +++ /dev/null @@ -1,135 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Mattairtech JM-DB-U2.
- * \copydetails Group_LEDs_JMDBU2
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_JMDBU2 JMDBU2
- * \brief Board specific LED driver header for the Mattairtech JM-DB-U2.
- *
- * Board specific LED driver header for the Mattairtech JM-DB-U2 (http://u2.mattair.net/index.html).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.4</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_JMDBU2_H__
-#define __LEDS_JMDBU2_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h deleted file mode 100644 index 932bfa14a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MAXIMUS/LEDs.h +++ /dev/null @@ -1,139 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Maximus.
- * \copydetails Group_LEDs_MAXIMUS
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_MAXIMUS MAXIMUS
- * \brief Board specific LED driver header for the Maximus.
- *
- * Board specific LED driver header for the Maximus (http://www.avrusb.com/).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>LG</td><td>High</td><td>PORTB.6</td></tr>
- * <tr><td>LEDS_LED2</td><td>Red</td><td>LR</td><td>High</td><td>PORTB.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_MAXIMUS_H__
-#define __LEDS_MAXIMUS_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 6)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 7)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2)
-
- /** LED mask for the none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRB |= LEDS_ALL_LEDS;
- PORTB &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRB &= ~LEDS_ALL_LEDS;
- PORTB &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTB |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTB &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTB = ((PORTB & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTB = ((PORTB & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINB = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTB & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h deleted file mode 100644 index 36a7bebe9..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROPENDOUS/Buttons.h +++ /dev/null @@ -1,208 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Micropendous series boards.
- * \copydetails Group_Buttons_MICROPENDOUS_32U2
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MICROPENDOUS_A MICROPENDOUS_A
- * \brief Board specific Button driver header for the Micropendous A (https://code.google.com/p/micropendous/wiki/MicropendousA).
- *
- * See \ref Group_Buttons_MICROPENDOUS_32U2 for more details.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MICROPENDOUS_1 MICROPENDOUS_1
- * \brief Board specific Button driver header for the Micropendous 1 (https://code.google.com/p/micropendous/wiki/Micropendous1).
- *
- * See \ref Group_Buttons_MICROPENDOUS_32U2 for more details.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MICROPENDOUS_2 MICROPENDOUS_2
- * \brief Board specific Button driver header for the Micropendous 2 (https://code.google.com/p/micropendous/wiki/Micropendous2).
- *
- * See \ref Group_Buttons_MICROPENDOUS_32U2 for more details.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MICROPENDOUS_3 MICROPENDOUS_3
- * \brief Board specific Button driver header for the Micropendous 3 (https://code.google.com/p/micropendous/wiki/Micropendous3).
- *
- * See \ref Group_Buttons_MICROPENDOUS_32U2 for more details.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MICROPENDOUS_4 MICROPENDOUS_4
- * \brief Board specific Button driver header for the Micropendous 4 (https://code.google.com/p/micropendous/wiki/Micropendous4).
- *
- * See \ref Group_Buttons_MICROPENDOUS_32U2 for more details.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MICROPENDOUS_DIP MICROPENDOUS_DIP
- * \brief Board specific Button driver header for the Micropendous DIP (https://code.google.com/p/micropendous/wiki/MicropendousDIP).
- *
- * See \ref Group_Buttons_MICROPENDOUS_32U2 for more details.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MICROPENDOUS_REV1 MICROPENDOUS_REV1
- * \brief Board specific Button driver header for the Micropendous Arduino-like Revision 1 (https://code.google.com/p/micropendous/wiki/Micropendous).
- *
- * See \ref Group_Buttons_MICROPENDOUS_32U2 for more details.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MICROPENDOUS_REV2 MICROPENDOUS_REV2
- * \brief Board specific Button driver header for the Micropendous Arduino-like Revision 2 (https://code.google.com/p/micropendous/wiki/Micropendous).
- *
- * See \ref Group_Buttons_MICROPENDOUS_32U2 for more details.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MICROPENDOUS_32U2 MICROPENDOUS_32U2
- * \brief Board specific Buttons driver header for the Micropendous 32U2.
- *
- * \note There are multiple supported Micropendous boards, compile with <code>BOARD = MICROPENDOUS_{VERSION}</code>.
- *
- * Board specific Buttons driver header for the Micropendous 32U2 (https://code.google.com/p/micropendous/wiki/Micropendous_32U2).
- *
- * <b>BOARD_MICROPENDOUS_1 and BOARD_MICROPENDOUS_32U2</b>:
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * <b>Other Revisions</b>:
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_MICROPENDOUS_H__
-#define __BUTTONS_MICROPENDOUS_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- #if (BOARD == BOARD_MICROPENDOUS_32U2)
- #define _BOARD_BUTTON1_MASK (1 << 7)
- #define _BOARD_BUTTON_PORTLETTER D
- #elif (BOARD == BOARD_MICROPENDOUS_A)
- #define _BOARD_BUTTON1_MASK (1 << 2)
- #define _BOARD_BUTTON_PORTLETTER E
- #elif (BOARD == BOARD_MICROPENDOUS_1)
- #define _BOARD_BUTTON1_MASK (1 << 7)
- #define _BOARD_BUTTON_PORTLETTER D
- #elif (BOARD == BOARD_MICROPENDOUS_2)
- #define _BOARD_BUTTON1_MASK (1 << 2)
- #define _BOARD_BUTTON_PORTLETTER E
- #elif (BOARD == BOARD_MICROPENDOUS_3)
- #define _BOARD_BUTTON1_MASK (1 << 2)
- #define _BOARD_BUTTON_PORTLETTER E
- #elif (BOARD == BOARD_MICROPENDOUS_4)
- #define _BOARD_BUTTON1_MASK (1 << 2)
- #define _BOARD_BUTTON_PORTLETTER E
- #elif (BOARD == BOARD_MICROPENDOUS_DIP)
- #define _BOARD_BUTTON1_MASK (1 << 2)
- #define _BOARD_BUTTON_PORTLETTER E
- #elif (BOARD == BOARD_MICROPENDOUS_REV1)
- #define _BOARD_BUTTON1_MASK (1 << 2)
- #define _BOARD_BUTTON_PORTLETTER E
- #elif (BOARD == BOARD_MICROPENDOUS_REV2)
- #define _BOARD_BUTTON1_MASK (1 << 2)
- #define _BOARD_BUTTON_PORTLETTER E
- #endif
-
- #define _BOARD_BUTTON_CONCAT2(Reg, Letter) Reg ## Letter
- #define _BOARD_BUTTON_CONCAT(Reg, Letter) _BOARD_BUTTON_CONCAT2(Reg, Letter)
-
- #define _BOARD_BUTTON_PORT _BOARD_BUTTON_CONCAT(PORT, _BOARD_BUTTON_PORTLETTER)
- #define _BOARD_BUTTON_PIN _BOARD_BUTTON_CONCAT(PIN, _BOARD_BUTTON_PORTLETTER)
- #define _BOARD_BUTTON_DDR _BOARD_BUTTON_CONCAT(DDR, _BOARD_BUTTON_PORTLETTER)
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 _BOARD_BUTTON1_MASK
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- _BOARD_BUTTON_DDR &= ~BUTTONS_BUTTON1;
- _BOARD_BUTTON_PORT |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- _BOARD_BUTTON_DDR &= ~BUTTONS_BUTTON1;
- _BOARD_BUTTON_PORT &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((_BOARD_BUTTON_PIN & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h deleted file mode 100644 index eeb337711..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROPENDOUS/LEDs.h +++ /dev/null @@ -1,177 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Micropendous-32U2.
- * \copydetails Group_LEDs_MICROPENDOUS_32U2
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_MICROPENDOUS_REV1 MICROPENDOUS_REV1
- * \brief Board specific LED driver header for the Micropendous Arduino-like Revision 1 (https://code.google.com/p/micropendous/wiki/Micropendous).
- *
- * See \ref Group_LEDs_MICROPENDOUS_32U2 for more details.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_MICROPENDOUS_REV2 MICROPENDOUS_REV2
- * \brief Board specific LED driver header for the Micropendous Arduino-like Revision 2 (https://code.google.com/p/micropendous/wiki/Micropendous).
- *
- * See \ref Group_LEDs_MICROPENDOUS_32U2 for more details.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_MICROPENDOUS_32U2 MICROPENDOUS_32U2
- * \brief Board specific LED driver header for the Micropendous-32U2.
- *
- * Board specific LED driver header for the Micropendous 32U2 (https://code.google.com/p/micropendous/wiki/Micropendous_32U2).
- *
- * <b>BOARD_MICROPENDOUS_32U2</b>:
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.6</td></tr>
- * </table>
- *
- * <b>Other Revisions</b>:
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTB.1</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_MICROPENDOUS_H__
-#define __LEDS_MICROPENDOUS_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- #if (BOARD == BOARD_MICROPENDOUS_32U2)
- #define _BOARD_LED1_MASK (1 << 6)
- #define _BOARD_LED_PORTLETTER D
- #elif (BOARD == BOARD_MICROPENDOUS_REV1)
- #define _BOARD_LED1_MASK (1 << 1)
- #define _BOARD_LED_PORTLETTER B
- #elif (BOARD == BOARD_MICROPENDOUS_REV2)
- #define _BOARD_LED1_MASK (1 << 1)
- #define _BOARD_LED_PORTLETTER B
- #endif
-
- #define _BOARD_LED_CONCAT2(Reg, Letter) Reg ## Letter
- #define _BOARD_LED_CONCAT(Reg, Letter) _BOARD_LED_CONCAT2(Reg, Letter)
-
- #define _BOARD_LED_PORT _BOARD_LED_CONCAT(PORT, _BOARD_LED_PORTLETTER)
- #define _BOARD_LED_PIN _BOARD_LED_CONCAT(PIN, _BOARD_LED_PORTLETTER)
- #define _BOARD_LED_DDR _BOARD_LED_CONCAT(DDR, _BOARD_LED_PORTLETTER)
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 _BOARD_LED1_MASK
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for the none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- _BOARD_LED_DDR |= LEDS_ALL_LEDS;
- _BOARD_LED_PORT &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- _BOARD_LED_DDR &= ~LEDS_ALL_LEDS;
- _BOARD_LED_PORT &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- _BOARD_LED_PORT |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- _BOARD_LED_PORT &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- _BOARD_LED_PORT = ((_BOARD_LED_PORT & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- _BOARD_LED_PORT = ((_BOARD_LED_PORT & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- _BOARD_LED_PIN = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (_BOARD_LED_PORT & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h deleted file mode 100644 index 01366a71a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROSIN162/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Microsin AVR-USB162 board.
- * \copydetails Group_Buttons_MICROSIN162
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MICROSIN162 MICROSIN162
- * \brief Board specific Buttons driver header for the Microsin AVR-USB162 board.
- *
- * Board specific Buttons driver header for the Microsin AVR-USB162 board (http://microsin.ru/content/view/685/44/).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_MICROSIN162_H__
-#define __BUTTONS_MICROSIN162_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h deleted file mode 100644 index 350703643..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MICROSIN162/LEDs.h +++ /dev/null @@ -1,135 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Microsin AVR-USB162 board.
- * \copydetails Group_LEDs_MICROSIN162
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_MICROSIN162 MICROSIN162
- * \brief Board specific LED driver header for the Microsin AVR-USB162 board.
- *
- * Board specific LED driver header for the Microsin AVR-USB162 board (http://microsin.ru/content/view/685/44/).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTD.4</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_MICROSIN162_H__
-#define __LEDS_MICROSIN162_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD |= LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD | LEDMask) & ~ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (~PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h deleted file mode 100644 index 3f1b592d3..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MINIMUS/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the MINIMUS.
- * \copydetails Group_Buttons_MINIMUS
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_MINIMUS MINIMUS
- * \brief Board specific Buttons driver header for the MINIMUS.
- *
- * Board specific Buttons driver header for the MINIMUS.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_MINIMUS_H__
-#define __BUTTONS_MINIMUS_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h deleted file mode 100644 index 4889722bd..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MINIMUS/LEDs.h +++ /dev/null @@ -1,143 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the MINIMUS.
- * \copydetails Group_LEDs_MINIMUS
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_MINIMUS MINIMUS
- * \brief Board specific LED driver header for the MINIMUS.
- *
- * Board specific LED driver header for the Minimus USB (http://www.minimususb.com/).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Red</td><td>General Indicator</td><td>Low</td><td>PORTD.5</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTD.6</td></tr>
- * <tr><td>LEDS_LED3</td><td>Blue</td><td>General Indicator</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_MINIMUS_H__
-#define __LEDS_MINIMUS_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 5)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 6)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 7)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for the none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD |= LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h deleted file mode 100644 index 9da569271..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/MULTIO/LEDs.h +++ /dev/null @@ -1,161 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Bitwizard Multio.
- * \copydetails Group_LEDs_MULTIO
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_MULTIO MULTIO
- * \brief Board specific LED driver header for the Bitwizard Multio.
- *
- * Board specific LED driver header for the Bitwizard Multio (http://www.bitwizard.nl/wiki/index.php/USB-multio).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.0</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTC.2</td></tr>
- * <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_MULTIO_H__
-#define __LEDS_MULTIO_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define LEDS_PORTD_LEDS (LEDS_LED1 | LEDS_LED3)
- #define LEDS_PORTC_LEDS LEDS_LED2
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 0)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 2)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED3 (1 << 7)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_PORTD_LEDS;
- DDRC |= LEDS_PORTC_LEDS;
-
- PORTD &= ~LEDS_PORTD_LEDS;
- PORTC &= ~LEDS_PORTC_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_PORTD_LEDS;
- DDRC &= ~LEDS_PORTC_LEDS;
-
- PORTD &= ~LEDS_PORTD_LEDS;
- PORTC &= ~LEDS_PORTC_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD |= (LEDMask & LEDS_PORTD_LEDS);
- PORTC |= (LEDMask & LEDS_PORTC_LEDS);
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~(LEDMask & LEDS_PORTD_LEDS);
- PORTC &= ~(LEDMask & LEDS_PORTC_LEDS);
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = (PORTD & ~LEDS_PORTD_LEDS) | (LEDMask & LEDS_PORTD_LEDS);
- PORTC = (PORTC & ~LEDS_PORTC_LEDS) | (LEDMask & LEDS_PORTC_LEDS);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = (PORTD & ~(LEDMask & LEDS_PORTD_LEDS)) | (ActiveMask & LEDS_PORTD_LEDS);
- PORTC = (PORTC & ~(LEDMask & LEDS_PORTC_LEDS)) | (ActiveMask & LEDS_PORTC_LEDS);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = (LEDMask & LEDS_PORTD_LEDS);
- PINC = (LEDMask & LEDS_PORTC_LEDS);
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return ((PORTD & LEDS_PORTD_LEDS) | (PORTC & LEDS_PORTC_LEDS));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h deleted file mode 100644 index 9f02729cc..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX162/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Olimex AVR-USB-162 Development Board.
- * \copydetails Group_Buttons_OLIMEX162
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_OLIMEX162 OLIMEX162
- * \brief Board specific Buttons driver header for the Olimex AVR-USB-162 Development Board.
- *
- * Board specific Buttons driver header for the Olimex AVR-USB-162 Development Board (http://www.olimex.com/dev/avr-usb-162.html).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_OLIMEX162_H__
-#define __BUTTONS_OLIMEX162_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h deleted file mode 100644 index 0e35eae4a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX162/LEDs.h +++ /dev/null @@ -1,135 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Olimex AVR-USB-162.
- * \copydetails Group_LEDs_OLIMEX162
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_OLIMEX162 OLIMEX162
- * \brief Board specific LED driver header for the Olimex AVR-USB-162.
- *
- * Board specific LED driver header for the Olimex AVR-USB-162 (http://www.olimex.com/dev/avr-usb-162.html).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Yellow</td><td>General Indicator</td><td>High</td><td>PORTD.4</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_OLIMEX162_H__
-#define __LEDS_OLIMEX162_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX32U4/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX32U4/Buttons.h deleted file mode 100644 index 4ae89acee..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX32U4/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Olimex AVR-USB-32U4 Development Board.
- * \copydetails Group_Buttons_OLIMEX32U4
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_OLIMEX32U4 OLIMEX32U4
- * \brief Board specific Buttons driver header for the Olimex AVR-USB-32U4 Development Board.
- *
- * Board specific Buttons driver header for the Olimex AVR-USB-32U4 Development Board (http://www.olimex.com/dev/olimexino-32u4.html).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_OLIMEX32U4_H__
-#define __BUTTONS_OLIMEX32U4_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 2)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PINE & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX32U4/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX32U4/LEDs.h deleted file mode 100644 index 38dde2c74..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEX32U4/LEDs.h +++ /dev/null @@ -1,179 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Olimex AVR-USB-32U4.
- * \copydetails Group_LEDs_OLIMEX32U4
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_OLIMEX32U4 OLIMEX32U4
- * \brief Board specific LED driver header for the Olimex AVR-USB-32U4.
- *
- * Board specific LED driver header for the Olimex AVR-USB-32U4 (http://www.olimex.com/dev/olimexino-32u4.html).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>TX</td><td>High</td><td>PORTD.5</td></tr>
- * <tr><td>LEDS_LED2</td><td>Yellow</td><td>RX</td><td>High</td><td>PORTB.0</td></tr>
- * <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator (Default Unconnected)</td><td>High</td><td>PORTE.6</td></tr>
- * <tr><td>LEDS_LED4</td><td>Yellow</td><td>General Indicator (Default Unconnected)</td><td>High</td><td>PORTB.5</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_OLIMEX32U4_H__
-#define __LEDS_OLIMEX32U4_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define LEDS_PORTB_LEDS (LEDS_LED2 | LEDS_LED4)
- #define LEDS_PORTD_LEDS (LEDS_LED1)
- #define LEDS_PORTE_LEDS (LEDS_LED3)
-
- #define LEDS_PORTD_MASK_SHIFT 1
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 ((1 << 5) >> LEDS_PORTD_MASK_SHIFT)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 0)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 5)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 (1 << 6)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRB |= LEDS_PORTB_LEDS;
- PORTB &= ~LEDS_PORTB_LEDS;
- DDRD |= (LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT);
- PORTD &= ~(LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT);
- DDRE |= LEDS_PORTE_LEDS;
- PORTE &= ~LEDS_PORTE_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRB &= ~LEDS_PORTB_LEDS;
- PORTB &= ~LEDS_PORTB_LEDS;
- DDRD &= ~(LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT);
- PORTD &= ~(LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT);
- DDRE &= ~LEDS_PORTE_LEDS;
- PORTE &= ~LEDS_PORTE_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTB |= (LEDMask & LEDS_PORTB_LEDS);
- PORTD |= ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT);
- PORTE |= (LEDMask & LEDS_PORTE_LEDS);
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTB &= ~(LEDMask & LEDS_PORTB_LEDS);
- PORTD &= ~((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT);
- PORTE &= ~(LEDMask & LEDS_PORTE_LEDS);
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTB = ((PORTB & ~LEDS_PORTB_LEDS) | (LEDMask & LEDS_PORTB_LEDS));
- PORTD = ((PORTD & ~(LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT)) |
- ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT));
- PORTE = ((PORTE & ~LEDS_PORTE_LEDS) | (LEDMask & LEDS_PORTE_LEDS));
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTB = ((PORTB & ~(LEDMask & LEDS_PORTB_LEDS)) | (ActiveMask & LEDS_PORTB_LEDS));
- PORTD = ((PORTD & ~((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT)) |
- ((ActiveMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT));
- PORTE = ((PORTE & ~(LEDMask & LEDS_PORTE_LEDS)) | (ActiveMask & LEDS_PORTE_LEDS));
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINB = (LEDMask & LEDS_PORTB_LEDS);
- PIND = ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT);
- PINE = (LEDMask & LEDS_PORTE_LEDS);
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return ((PORTB & LEDS_PORTB_LEDS) |
- ((PORTD & (LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT)) >> LEDS_PORTD_MASK_SHIFT) |
- (PORTE & LEDS_PORTE_LEDS));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h deleted file mode 100644 index 70b2467bb..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXISPMK2/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Olimex AVR-ISP-MK2 Development Board.
- * \copydetails Group_Buttons_OLIMEXISPMK2
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_OLIMEXISPMK2 OLIMEXISPMK2
- * \brief Board specific Buttons driver header for the Olimex AVR-ISP-MK2.
- *
- * Board specific Buttons driver header for the Olimex AVR-ISP-MK2 Development Board (https://www.olimex.com/dev/avr-isp-mk2.html).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_OLIMEXISPMK2_H__
-#define __BUTTONS_OLIMEXISPMK2_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h deleted file mode 100644 index a1b8825da..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXISPMK2/LEDs.h +++ /dev/null @@ -1,143 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Olimex AVR-ISP-MK2 Development Board.
- * \copydetails Group_LEDs_OLIMEXISPMK2
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_OLIMEXISPMK2 OLIMEXISPMK2
- * \brief Board specific LED driver header for the Olimex AVR-ISP-MK2.
- *
- * Board specific LED driver header for the Olimex AVR-ISP-MK2 Development Board (https://www.olimex.com/dev/avr-isp-mk2.html).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Yellow</td><td>Target Power</td><td>High</td><td>PORTB.5</td></tr>
- * <tr><td>LEDS_LED2</td><td>Red</td><td>Activity</td><td>High</td><td>PORTB.6</td></tr>
- * <tr><td>LEDS_LED3</td><td>Green</td><td>Ready</td><td>High</td><td>PORTB.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_OLIMEXISPMK2_H__
-#define __LEDS_OLIMEXISPMK2_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 5)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 6)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 7)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRB |= LEDS_ALL_LEDS;
- PORTB &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRB &= ~LEDS_ALL_LEDS;
- PORTB &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTB |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTB &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTB = ((PORTB & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTB = ((PORTB & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINB = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTB & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h deleted file mode 100644 index c779c5578..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Olimex AVR-USB-T32U4 Development Board.
- * \copydetails Group_Buttons_OLIMEXT32U4
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_OLIMEXT32U4 OLIMEXT32U4
- * \brief Board specific Buttons driver header for the Olimex AVR-USB-32U4 Development Board.
- *
- * Board specific Buttons driver header for the Olimex AVR-USB-T32U4 Development Board (http://www.olimex.com/dev/avr-t32u4.html).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_OLIMEXT32U4_H__
-#define __BUTTONS_OLIMEXT32U4_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 2)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PINE & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h deleted file mode 100644 index b3e4c701d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/OLIMEXT32U4/LEDs.h +++ /dev/null @@ -1,169 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Olimex AVR-USB-T32U4.
- * \copydetails Group_LEDs_OLIMEXT32U4
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_OLIMEXT32U4 OLIMEXT32U4
- * \brief Board specific LED driver header for the Olimex AVR-USB-T32U4.
- *
- * Board specific LED driver header for the Olimex AVR-USB-T32U4 (http://www.olimex.com/dev/avr-t32u4.html).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>TX</td><td>High</td><td>PORTD.5</td></tr>
- * <tr><td>LEDS_LED2</td><td>Yellow</td><td>RX</td><td>High</td><td>PORTB.0</td></tr>
- * <tr><td>LEDS_LED3</td><td>N/A</td><td>General Indicator (Not Mounted)</td><td>High</td><td>PORTE.6</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_OLIMEXT32U4_H__
-#define __LEDS_OLIMEXT32U4_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define LEDS_PORTB_LEDS (LEDS_LED2)
- #define LEDS_PORTD_LEDS (LEDS_LED1)
- #define LEDS_PORTE_LEDS (LEDS_LED3)
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 5)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 0)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 6)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRB |= LEDS_PORTB_LEDS;
- PORTB &= ~LEDS_PORTB_LEDS;
- DDRD |= LEDS_PORTD_LEDS;
- PORTD &= ~LEDS_PORTD_LEDS;
- DDRE |= LEDS_PORTE_LEDS;
- PORTE &= ~LEDS_PORTE_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRB &= ~LEDS_PORTB_LEDS;
- PORTB &= ~LEDS_PORTB_LEDS;
- DDRD &= ~LEDS_PORTD_LEDS;
- PORTD &= ~LEDS_PORTD_LEDS;
- DDRE &= ~LEDS_PORTE_LEDS;
- PORTE &= ~LEDS_PORTE_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTB |= (LEDMask & LEDS_PORTB_LEDS);
- PORTD |= (LEDMask & LEDS_PORTD_LEDS);
- PORTE |= (LEDMask & LEDS_PORTE_LEDS);
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTB &= ~(LEDMask & LEDS_PORTB_LEDS);
- PORTD &= ~(LEDMask & LEDS_PORTD_LEDS);
- PORTE &= ~(LEDMask & LEDS_PORTE_LEDS);
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTB = ((PORTB & ~LEDS_PORTB_LEDS) | (LEDMask & LEDS_PORTB_LEDS));
- PORTD = ((PORTD & ~LEDS_PORTD_LEDS) | (LEDMask & LEDS_PORTD_LEDS));
- PORTE = ((PORTE & ~LEDS_PORTE_LEDS) | (LEDMask & LEDS_PORTE_LEDS));
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTB = ((PORTB & ~(LEDMask & LEDS_PORTB_LEDS)) | (ActiveMask & LEDS_PORTB_LEDS));
- PORTD = ((PORTD & ~(LEDMask & LEDS_PORTD_LEDS)) | (ActiveMask & LEDS_PORTD_LEDS));
- PORTE = ((PORTE & ~(LEDMask & LEDS_PORTE_LEDS)) | (ActiveMask & LEDS_PORTE_LEDS));
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINB = (LEDMask & LEDS_PORTB_LEDS);
- PIND = (LEDMask & LEDS_PORTD_LEDS);
- PINE = (LEDMask & LEDS_PORTE_LEDS);
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return ((PORTB & LEDS_PORTB_LEDS) | (PORTD & LEDS_PORTD_LEDS) | (PORTE & LEDS_PORTE_LEDS));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h deleted file mode 100644 index a440b6f00..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/RZUSBSTICK/LEDs.h +++ /dev/null @@ -1,175 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel RZUSBSTICK.
- * \copydetails Group_LEDs_RZUSBSTICK
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_RZUSBSTICK RZUSBSTICK
- * \brief Board specific LED driver header for the Atmel RZUSBSTICK.
- *
- * Board specific LED driver header for the Atmel RZUSBSTICK.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Blue</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>
- * <tr><td>LEDS_LED1</td><td>Red</td><td>General Indicator</td><td>Low</td><td>PORTD.5</td></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTE.6</td></tr>
- * <tr><td>LEDS_LED1</td><td>Yellow</td><td>General Indicator</td><td>Low</td><td>PORTE.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_RZUSBSTICK_H__
-#define __LEDS_RZUSBSTICK_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define LEDS_PORTD_LEDS (LEDS_LED1 | LEDS_LED2)
- #define LEDS_PORTE_LEDS (LEDS_LED3 | LEDS_LED4)
-
- #define LEDS_PORTE_MASK_SHIFT 4
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 7)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 5)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 ((1 << 6) >> LEDS_PORTE_MASK_SHIFT)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 ((1 << 7) >> LEDS_PORTE_MASK_SHIFT)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_PORTD_LEDS;
- PORTD &= ~LEDS_LED1;
- PORTD |= LEDS_LED2;
-
- DDRE |= (LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT);
- PORTE |= (LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_PORTD_LEDS;
- PORTD &= ~LEDS_PORTD_LEDS;
-
- DDRE &= ~(LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT);
- PORTE &= ~(LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD |= (LEDMask & LEDS_LED1);
- PORTD &= ~(LEDMask & LEDS_LED2);
- PORTE &= ~((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~(LEDMask & LEDS_LED1);
- PORTD |= (LEDMask & LEDS_LED2);
- PORTE |= ((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = (((PORTD & ~LEDS_LED1) | (LEDMask & LEDS_LED1)) |
- ((PORTD | LEDS_LED2) & ~(LEDMask & LEDS_LED2)));
- PORTE = ((PORTE | (LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT)) &
- ~((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT));
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = (((PORTD & ~(LEDMask & LEDS_LED1)) | (ActiveMask & LEDS_LED1)) |
- ((PORTD | (LEDMask & LEDS_LED2)) & ~(ActiveMask & LEDS_LED2)));
- PORTE = ((PORTE | ((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT)) &
- ~((ActiveMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT));
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = (LEDMask & LEDS_PORTD_LEDS);
- PINE = ((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (((PORTD & LEDS_LED1) | (~PORTD & LEDS_LED2)) |
- ((~PORTE & (LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT)) >> LEDS_PORTE_MASK_SHIFT));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h deleted file mode 100644 index 39267055e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/SPARKFUN8U2/LEDs.h +++ /dev/null @@ -1,135 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Sparkfun ATMEGA8U2 breakout board.
- * \copydetails Group_LEDs_SPARKFUN8U2
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_SPARKFUN8U2 SPARKFUN8U2
- * \brief Board specific LED driver header for the Sparkfun ATMEGA8U2 breakout board.
- *
- * Board specific LED driver header for the Sparkfun ATMEGA8U2 breakout board (http://www.sparkfun.com/products/10277).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTB.4</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_SPARKFUN8U2_H__
-#define __LEDS_SPARKFUN8U2_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRB |= LEDS_ALL_LEDS;
- PORTB |= LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRB &= ~LEDS_ALL_LEDS;
- PORTB &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTB &= ~LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTB |= LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTB = ((PORTB | LEDS_ALL_LEDS) & ~LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTB = ((PORTB | LEDMask) & ~ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINB = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (~PORTB & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/Buttons.h deleted file mode 100644 index dcca4d021..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Atmel STK525.
- * \copydetails Group_Buttons_STK525
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_STK525 STK525
- * \brief Board specific Buttons driver header for the Atmel STK525.
- *
- * Board specific Buttons driver header for the Atmel STK525.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_STK525_H__
-#define __BUTTONS_STK525_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 2)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PINE & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h deleted file mode 100644 index 1e24c5263..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h +++ /dev/null @@ -1,220 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Dataflash driver header for the Atmel STK525.
- * \copydetails Group_Dataflash_STK525
- *
- * \note This file should not be included directly. It is automatically included as needed by the dataflash driver
- * dispatch header located in LUFA/Drivers/Board/Dataflash.h.
- */
-
-/** \ingroup Group_Dataflash
- * \defgroup Group_Dataflash_STK525 STK525
- * \brief Board specific Dataflash driver header for the Atmel STK525.
- *
- * Board specific Dataflash driver header for the Atmel STK525.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
- * <tr><td>DATAFLASH_CHIP1</td><td>AT45DB321C (4MB)</td><td>PORTB.4</td><td>SPI0</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __DATAFLASH_STK525_H__
-#define __DATAFLASH_STK525_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../../../Misc/AT45DB321C.h"
- #include "../../../Peripheral/SPI.h"
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_DATAFLASH_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define DATAFLASH_CHIPCS_MASK (1 << 4)
- #define DATAFLASH_CHIPCS_DDR DDRB
- #define DATAFLASH_CHIPCS_PORT PORTB
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Constant indicating the total number of dataflash ICs mounted on the selected board. */
- #define DATAFLASH_TOTALCHIPS 1
-
- /** Mask for no dataflash chip selected. */
- #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK
-
- /** Mask for the first dataflash chip selected. */
- #define DATAFLASH_CHIP1 0
-
- /** Internal main memory page size for the board's dataflash IC. */
- #define DATAFLASH_PAGE_SIZE 512
-
- /** Total number of pages inside the board's dataflash IC. */
- #define DATAFLASH_PAGES 8192
-
- /* Inline Functions: */
- /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
- * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
- */
- static inline void Dataflash_Init(void)
- {
- DATAFLASH_CHIPCS_DDR |= DATAFLASH_CHIPCS_MASK;
- DATAFLASH_CHIPCS_PORT |= DATAFLASH_CHIPCS_MASK;
- }
-
- /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
- {
- return SPI_TransferByte(Byte);
- }
-
- /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- */
- static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SendByte(const uint8_t Byte)
- {
- SPI_SendByte(Byte);
- }
-
- /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_ReceiveByte(void)
- {
- return SPI_ReceiveByte();
- }
-
- /** Determines the currently selected dataflash chip.
- *
- * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
- * or a DATAFLASH_CHIPn mask (where n is the chip number).
- */
- static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_GetSelectedChip(void)
- {
- return (DATAFLASH_CHIPCS_PORT & DATAFLASH_CHIPCS_MASK);
- }
-
- /** Selects the given dataflash chip.
- *
- * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of DATAFLASH_CHIPn mask (where n is
- * the chip number).
- */
- static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SelectChip(const uint8_t ChipMask)
- {
- DATAFLASH_CHIPCS_PORT = ((DATAFLASH_CHIPCS_PORT & ~DATAFLASH_CHIPCS_MASK) | ChipMask);
- }
-
- /** Deselects the current dataflash chip, so that no dataflash is selected. */
- static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_DeselectChip(void)
- {
- Dataflash_SelectChip(DATAFLASH_NO_CHIP);
- }
-
- /** Selects a dataflash IC from the given page number, which should range from 0 to
- * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
- * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside
- * the total number of pages contained in the boards dataflash ICs, all dataflash ICs
- * are deselected.
- *
- * \param[in] PageAddress Address of the page to manipulate, ranging from
- * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
- */
- static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
- {
- Dataflash_DeselectChip();
-
- if (PageAddress >= DATAFLASH_PAGES)
- return;
-
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- }
-
- /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive
- * a new command.
- */
- static inline void Dataflash_ToggleSelectedChipCS(void)
- {
- uint8_t SelectedChipMask = Dataflash_GetSelectedChip();
-
- Dataflash_DeselectChip();
- Dataflash_SelectChip(SelectedChipMask);
- }
-
- /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main
- * memory page program or main memory to buffer transfer.
- */
- static inline void Dataflash_WaitWhileBusy(void)
- {
- Dataflash_ToggleSelectedChipCS();
- Dataflash_SendByte(DF_CMD_GETSTATUS);
- while (!(Dataflash_ReceiveByte() & DF_STATUS_READY));
- Dataflash_ToggleSelectedChipCS();
- }
-
- /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
- * dataflash commands which require a complete 24-bit address.
- *
- * \param[in] PageAddress Page address within the selected dataflash IC
- * \param[in] BufferByte Address within the dataflash's buffer
- */
- static inline void Dataflash_SendAddressBytes(uint16_t PageAddress,
- const uint16_t BufferByte)
- {
- Dataflash_SendByte(PageAddress >> 6);
- Dataflash_SendByte((PageAddress << 2) | (BufferByte >> 8));
- Dataflash_SendByte(BufferByte);
- }
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/Joystick.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/Joystick.h deleted file mode 100644 index dfa86acaa..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/Joystick.h +++ /dev/null @@ -1,130 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific joystick driver header for the Atmel STK525.
- * \copydetails Group_Joystick_STK525
- *
- * \note This file should not be included directly. It is automatically included as needed by the joystick driver
- * dispatch header located in LUFA/Drivers/Board/Joystick.h.
- */
-
-/** \ingroup Group_Joystick
- * \defgroup Group_Joystick_STK525 STK525
- * \brief Board specific joystick driver header for the Atmel STK525.
- *
- * Board specific joystick driver header for the Atmel STK525.
- *
- * <table>
- * <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
- * <tr><td>PORTB.6</td><td>PORTB.7</td><td>PORTE.4</td><td>PORTE.5</td><td>PORTB.5</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __JOYSTICK_STK525_H__
-#define __JOYSTICK_STK525_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_JOYSTICK_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define JOY_BMASK ((1 << 5) | (1 << 6) | (1 << 7))
- #define JOY_EMASK ((1 << 4) | (1 << 5))
-
- #define JOY_PORTE_MASK_SHIFT 1
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask for the joystick being pushed in the left direction. */
- #define JOY_LEFT (1 << 6)
-
- /** Mask for the joystick being pushed in the right direction. */
- #define JOY_RIGHT ((1 << 4) >> JOY_PORTE_MASK_SHIFT)
-
- /** Mask for the joystick being pushed in the upward direction. */
- #define JOY_UP (1 << 7)
-
- /** Mask for the joystick being pushed in the downward direction. */
- #define JOY_DOWN ((1 << 5) >> JOY_PORTE_MASK_SHIFT)
-
- /** Mask for the joystick being pushed inward. */
- #define JOY_PRESS (1 << 5)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Joystick_Init(void)
- {
- DDRB &= ~JOY_BMASK;
- DDRE &= ~JOY_EMASK;
-
- PORTB |= JOY_BMASK;
- PORTE |= JOY_EMASK;
- }
-
- static inline void Joystick_Disable(void)
- {
- DDRB &= ~JOY_BMASK;
- DDRE &= ~JOY_EMASK;
-
- PORTB &= ~JOY_BMASK;
- PORTE &= ~JOY_EMASK;
- }
-
- static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Joystick_GetStatus(void)
- {
- return (((uint8_t)~PINB & JOY_BMASK) | (((uint8_t)~PINE & JOY_EMASK) >> JOY_PORTE_MASK_SHIFT));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/LEDs.h deleted file mode 100644 index 48ac4860c..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK525/LEDs.h +++ /dev/null @@ -1,147 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel STK525.
- * \copydetails Group_LEDs_STK525
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_STK525 STK525
- * \brief Board specific LED driver header for the Atmel STK525.
- *
- * Board specific LED driver header for the Atmel STK525.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.4</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.5</td></tr>
- * <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.6</td></tr>
- * <tr><td>LEDS_LED4</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_STK525_H__
-#define __LEDS_STK525_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 5)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 7)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 (1 << 6)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/Buttons.h deleted file mode 100644 index ec5a7e0e6..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Atmel STK526.
- * \copydetails Group_Buttons_STK526
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_STK526 STK526
- * \brief Board specific Buttons driver header for the Atmel STK526.
- *
- * Board specific Buttons driver header for the Atmel STK526.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_STK526_H__
-#define __BUTTONS_STK526_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h deleted file mode 100644 index 07d44b146..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h +++ /dev/null @@ -1,220 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Dataflash driver header for the Atmel STK525.
- * \copydetails Group_Dataflash_STK526
- *
- * \note This file should not be included directly. It is automatically included as needed by the dataflash driver
- * dispatch header located in LUFA/Drivers/Board/Dataflash.h.
- */
-
-/** \ingroup Group_Dataflash
- * \defgroup Group_Dataflash_STK526 STK526
- * \brief Board specific Dataflash driver header for the Atmel STK525.
- *
- * Board specific Dataflash driver header for the Atmel STK525.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
- * <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTC.2</td><td>SPI0</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __DATAFLASH_STK526_H__
-#define __DATAFLASH_STK526_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../../../Misc/AT45DB642D.h"
- #include "../../../Peripheral/SPI.h"
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_DATAFLASH_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define DATAFLASH_CHIPCS_MASK (1 << 2)
- #define DATAFLASH_CHIPCS_DDR DDRC
- #define DATAFLASH_CHIPCS_PORT PORTC
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Constant indicating the total number of dataflash ICs mounted on the selected board. */
- #define DATAFLASH_TOTALCHIPS 1
-
- /** Mask for no dataflash chip selected. */
- #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK
-
- /** Mask for the first dataflash chip selected. */
- #define DATAFLASH_CHIP1 0
-
- /** Internal main memory page size for the board's dataflash IC. */
- #define DATAFLASH_PAGE_SIZE 1024
-
- /** Total number of pages inside the board's dataflash IC. */
- #define DATAFLASH_PAGES 8192
-
- /* Inline Functions: */
- /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
- * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
- */
- static inline void Dataflash_Init(void)
- {
- DATAFLASH_CHIPCS_DDR |= DATAFLASH_CHIPCS_MASK;
- DATAFLASH_CHIPCS_PORT |= DATAFLASH_CHIPCS_MASK;
- }
-
- /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
- {
- return SPI_TransferByte(Byte);
- }
-
- /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- */
- static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SendByte(const uint8_t Byte)
- {
- SPI_SendByte(Byte);
- }
-
- /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_ReceiveByte(void)
- {
- return SPI_ReceiveByte();
- }
-
- /** Determines the currently selected dataflash chip.
- *
- * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
- * or a DATAFLASH_CHIPn mask (where n is the chip number).
- */
- static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_GetSelectedChip(void)
- {
- return (DATAFLASH_CHIPCS_PORT & DATAFLASH_CHIPCS_MASK);
- }
-
- /** Selects the given dataflash chip.
- *
- * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of DATAFLASH_CHIPn mask (where n is
- * the chip number).
- */
- static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SelectChip(const uint8_t ChipMask)
- {
- DATAFLASH_CHIPCS_PORT = ((DATAFLASH_CHIPCS_PORT & ~DATAFLASH_CHIPCS_MASK) | ChipMask);
- }
-
- /** Deselects the current dataflash chip, so that no dataflash is selected. */
- static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_DeselectChip(void)
- {
- Dataflash_SelectChip(DATAFLASH_NO_CHIP);
- }
-
- /** Selects a dataflash IC from the given page number, which should range from 0 to
- * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
- * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside
- * the total number of pages contained in the boards dataflash ICs, all dataflash ICs
- * are deselected.
- *
- * \param[in] PageAddress Address of the page to manipulate, ranging from
- * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
- */
- static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
- {
- Dataflash_DeselectChip();
-
- if (PageAddress >= DATAFLASH_PAGES)
- return;
-
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- }
-
- /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive
- * a new command.
- */
- static inline void Dataflash_ToggleSelectedChipCS(void)
- {
- uint8_t SelectedChipMask = Dataflash_GetSelectedChip();
-
- Dataflash_DeselectChip();
- Dataflash_SelectChip(SelectedChipMask);
- }
-
- /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main
- * memory page program or main memory to buffer transfer.
- */
- static inline void Dataflash_WaitWhileBusy(void)
- {
- Dataflash_ToggleSelectedChipCS();
- Dataflash_SendByte(DF_CMD_GETSTATUS);
- while (!(Dataflash_ReceiveByte() & DF_STATUS_READY));
- Dataflash_ToggleSelectedChipCS();
- }
-
- /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
- * dataflash commands which require a complete 24-bit address.
- *
- * \param[in] PageAddress Page address within the selected dataflash IC
- * \param[in] BufferByte Address within the dataflash's buffer
- */
- static inline void Dataflash_SendAddressBytes(uint16_t PageAddress,
- const uint16_t BufferByte)
- {
- Dataflash_SendByte(PageAddress >> 5);
- Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8));
- Dataflash_SendByte(BufferByte);
- }
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/Joystick.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/Joystick.h deleted file mode 100644 index bc5f489ed..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/Joystick.h +++ /dev/null @@ -1,123 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific joystick driver header for the Atmel STK526.
- * \copydetails Group_Joystick_STK526
- *
- * \note This file should not be included directly. It is automatically included as needed by the joystick driver
- * dispatch header located in LUFA/Drivers/Board/Joystick.h.
- */
-
-/** \ingroup Group_Joystick
- * \defgroup Group_Joystick_STK526 STK526
- * \brief Board specific joystick driver header for the Atmel STK526.
- *
- * Board specific joystick driver header for the Atmel STK526.
- *
- * <table>
- * <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
- * <tr><td>PORTB.4</td><td>PORTB.5</td><td>PORTB.6</td><td>PORTB.7</td><td>PORTB.0</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __JOYSTICK_STK526_H__
-#define __JOYSTICK_STK526_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_JOYSTICK_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define JOY_BMASK ((1 << 0) | (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7))
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask for the joystick being pushed in the left direction. */
- #define JOY_LEFT (1 << 4)
-
- /** Mask for the joystick being pushed in the right direction. */
- #define JOY_RIGHT (1 << 6)
-
- /** Mask for the joystick being pushed in the upward direction. */
- #define JOY_UP (1 << 5)
-
- /** Mask for the joystick being pushed in the downward direction. */
- #define JOY_DOWN (1 << 7)
-
- /** Mask for the joystick being pushed inward. */
- #define JOY_PRESS (1 << 0)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Joystick_Init(void)
- {
- DDRB &= ~JOY_BMASK;
-
- PORTB |= JOY_BMASK;
- }
-
- static inline void Joystick_Disable(void)
- {
- DDRB &= ~JOY_BMASK;
-
- PORTB &= ~JOY_BMASK;
- }
-
- static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Joystick_GetStatus(void)
- {
- return ((uint8_t)~PINB & JOY_BMASK);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/LEDs.h deleted file mode 100644 index d9bb3b99b..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/STK526/LEDs.h +++ /dev/null @@ -1,147 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel STK526.
- * \copydetails Group_LEDs_STK526
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_STK526 STK526
- * \brief Board specific LED driver header for the Atmel STK526.
- *
- * Board specific LED driver header for the Atmel STK526.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.1</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.0</td></tr>
- * <tr><td>LEDS_LED3</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.5</td></tr>
- * <tr><td>LEDS_LED4</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.4</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_STK526_H__
-#define __LEDS_STK526_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 1)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 0)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 5)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 (1 << 4)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h deleted file mode 100644 index 8f0cfafb2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/TEENSY/LEDs.h +++ /dev/null @@ -1,176 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the PJRC Teensy 1.x/2.x boards.
- * \copydetails Group_LEDs_TEENSY
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_TEENSY2 TEENSY2
- * \brief Board specific LED driver header for the PJRC Teensy 2 boards.
- *
- * See \ref Group_LEDs_TEENSY for more details.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_TEENSY TEENSY
- * \brief Board specific LED driver header for the PJRC Teensy 1.x/2.x boards.
- *
- * \note For version 2 Teensy boards, compile with <code>BOARD = TEENSY2</code>.
- *
- * Board specific LED driver header for the PJRC Teensy boards (http://www.pjrc.com/teensy/index.html).
- *
- * <b>TEENSY</b>:
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.6</td></tr>
- * </table>
- *
- * <b>TEENSY2</b>:
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTD.6</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_TEENSY_H__
-#define __LEDS_TEENSY_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 6)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
-
- #if (BOARD == BOARD_TEENSY2)
- PORTD &= ~LEDS_ALL_LEDS;
- #else
- PORTD |= LEDS_ALL_LEDS;
- #endif
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- #if (BOARD == BOARD_TEENSY2)
- PORTD |= LEDMask;
- #else
- PORTD &= ~LEDMask;
- #endif
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- #if (BOARD == BOARD_TEENSY2)
- PORTD &= ~LEDMask;
- #else
- PORTD |= LEDMask;
- #endif
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- #if (BOARD == BOARD_TEENSY2)
- PORTD = ((PORTD & ~LEDS_ALL_LEDS) | LEDMask);
- #else
- PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask);
- #endif
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- #if (BOARD == BOARD_TEENSY2)
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- #else
- PORTD = ((PORTD | LEDMask) & ~ActiveMask);
- #endif
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- #if (BOARD == BOARD_TEENSY2)
- return (PORTD & LEDS_ALL_LEDS);
- #else
- return (~PORTD & LEDS_ALL_LEDS);
- #endif
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/TUL/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/TUL/Buttons.h deleted file mode 100644 index a8e104128..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/TUL/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the TUL.
- * \copydetails Group_Buttons_TUL
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_TUL TUL
- * \brief Board specific Buttons driver header for the TUL.
- *
- * Board specific Buttons driver header for the Busware TUL (http://www.busware.de/tiki-index.php?page=TUL).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_TUL_H__
-#define __BUTTONS_TUL_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 2)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PINE & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/TUL/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/TUL/LEDs.h deleted file mode 100644 index 494396bfc..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/TUL/LEDs.h +++ /dev/null @@ -1,135 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Busware TUL.
- * \copydetails Group_LEDs_TUL
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_TUL TUL
- * \brief Board specific LED driver header for the Busware TUL.
- *
- * Board specific LED driver header for the Busware TUL (http://www.busware.de/tiki-index.php?page=TUL).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTF.0</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_TUL_H__
-#define __LEDS_TUL_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 0)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for the none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRF |= LEDS_ALL_LEDS;
- PORTF &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRF &= ~LEDS_ALL_LEDS;
- PORTF &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTF |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTF &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTF = ((PORTF & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTF = ((PORTF & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINF = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTF & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h deleted file mode 100644 index 3e0bede07..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/UDIP/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the UDIP.
- * \copydetails Group_Buttons_UDIP
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_UDIP UDIP
- * \brief Board specific Buttons driver header for the UDIP.
- *
- * Board specific Buttons driver header for the Linnix UDIP (http://linnix.com/udip/).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_UDIP_H__
-#define __BUTTONS_UDIP_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h deleted file mode 100644 index 1cff6fc69..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/UDIP/LEDs.h +++ /dev/null @@ -1,163 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Linnix UDIP.
- * \copydetails Group_LEDs_UDIP
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_UDIP UDIP
- * \brief Board specific LED driver header for the Linnix UDIP.
- *
- * Board specific LED driver header for the Linnix UDIP (http://linnix.com/udip/).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>Bicolor Indicator 1</td><td>High</td><td>PORTB.6</td></tr>
- * <tr><td>LEDS_LED2</td><td>Red</td><td>Bicolor Indicator 1</td><td>High</td><td>PORTB.5</td></tr>
- * <tr><td>LEDS_LED3</td><td>Green</td><td>Bicolor Indicator 2</td><td>High</td><td>PORTD.5</td></tr>
- * <tr><td>LEDS_LED4</td><td>Red</td><td>Bicolor Indicator 2</td><td>High</td><td>PORTD.4</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_UDIP_H__
-#define __LEDS_UDIP_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define LEDS_PORTB_LEDS (LEDS_LED1 | LEDS_LED2)
- #define LEDS_PORTD_LEDS (LEDS_LED3 | LEDS_LED4)
-
- #define LEDS_PORTD_MASK_SHIFT 1
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 6)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 5)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 ((1 << 5) >> LEDS_PORTD_MASK_SHIFT)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 ((1 << 4) >> LEDS_PORTD_MASK_SHIFT)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRB |= LEDS_PORTB_LEDS;
- DDRD |= (LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT);
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRB &= ~LEDS_PORTB_LEDS;
- DDRD &= ~(LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT);
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTB |= (LEDMask & LEDS_PORTB_LEDS);
- PORTD |= ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT);
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTB &= ~(LEDMask & LEDS_PORTB_LEDS);
- PORTD &= ~((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT);
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTB = (PORTB & ~LEDS_PORTB_LEDS) | (LEDMask & LEDS_PORTB_LEDS);
- PORTD = (PORTD & ~(LEDS_PORTD_LEDS << LEDS_PORTD_MASK_SHIFT)) |
- ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTB = (PORTB & ~(LEDMask & LEDS_PORTB_LEDS)) | (ActiveMask & LEDS_PORTB_LEDS);
- PORTD = (PORTD & ~((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT)) |
- ((ActiveMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINB = (LEDMask & LEDS_PORTB_LEDS);
- PIND = ((LEDMask & LEDS_PORTD_LEDS) << LEDS_PORTD_MASK_SHIFT);
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return ((PORTB & LEDS_PORTB_LEDS) | ((PORTD & LEDS_PORTD_LEDS) >> LEDS_PORTD_MASK_SHIFT));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/UNO/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/UNO/LEDs.h deleted file mode 100644 index c7e09d4cb..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/UNO/LEDs.h +++ /dev/null @@ -1,139 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Arduino Uno.
- * \copydetails Group_LEDs_UNO
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_UNO UNO
- * \brief Board specific LED driver header for the Arduino Uno.
- *
- * Board specific LED driver header for the Arduino Uno (http://arduino.cc/en/Main/ArduinoBoardUno).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Yellow</td><td>RX</td><td>Low</td><td>PORTD.4</td></tr>
- * <tr><td>LEDS_LED2</td><td>Yellow</td><td>TX</td><td>Low</td><td>PORTD.5</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_UNO_H__
-#define __LEDS_UNO_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 5)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD |= LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD | LEDMask) & ~ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h deleted file mode 100644 index 3775e5c84..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USB2AX/Buttons.h +++ /dev/null @@ -1,113 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Paranoid Studio USB2AX.
- * \copydetails Group_Buttons_USB2AX
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_USB2AX_V3 USB2AX_V3
- * \brief Board specific Button driver header for the Paranoid Studio USB2AX revision 3.
- *
- * See \ref Group_Buttons_USB2AX for more details.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_USB2AX USB2AX
- * \brief Board specific Buttons driver header for the Paranoid Studio USB2AX.
- *
- * \note For version 3 USB2AX boards, compile with <code>BOARD = USB2AX_V3</code>.
- *
- * Board specific Buttons driver header for the Paranoid Studio USB2AX (http://paranoidstudio.assembla.com/wiki/show/paranoidstudio/USB2AX).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_USB2AX_H__
-#define __BUTTONS_USB2AX_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h deleted file mode 100644 index b8d2db01d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USB2AX/LEDs.h +++ /dev/null @@ -1,196 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Paranoid Studio USB2AX.
- * \copydetails Group_LEDs_USB2AX
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_USB2AX_V3 USB2AX_V3
- * \brief Board specific LED driver header for the Paranoid Studio USB2AX revision 3.
- *
- * See \ref Group_LEDs_USB2AX for more details.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_USB2AX USB2AX
- * \brief Board specific LED driver header for the Paranoid Studio USB2AX.
- *
- * \note For version 3 USB2AX boards, compile with <code>BOARD = USB2AX_V3</code>.
- *
- * Board specific LED driver header for the Paranoid Studio USB2AX (http://paranoidstudio.assembla.com/wiki/show/paranoidstudio/USB2AX).
- *
- * <b>USB2AX</b>:
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTC.6</td></tr>
- * </table>
- *
- * <b>USB2AX_V3</b>:
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>High</td><td>PORTD.1</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_USB2AX_H__
-#define __LEDS_USB2AX_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #if (BOARD == BOARD_USB2AX)
- #define USB2AX_LEDS_LED1 (1 << 6)
- #else
- #define USB2AX_LEDS_LED1 (1 << 1)
- #endif
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 USB2AX_LEDS_LED1
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- #if (BOARD == BOARD_USB2AX)
- DDRC |= LEDS_ALL_LEDS;
- PORTC &= ~LEDS_ALL_LEDS;
- #else
- DDRD |= LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- #endif
- }
-
- static inline void LEDs_Disable(void)
- {
- #if (BOARD == BOARD_USB2AX)
- DDRC &= ~LEDS_ALL_LEDS;
- PORTC &= ~LEDS_ALL_LEDS;
- #else
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- #endif
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- #if (BOARD == BOARD_USB2AX)
- PORTC |= LEDMask;
- #else
- PORTD |= LEDMask;
- #endif
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- #if (BOARD == BOARD_USB2AX)
- PORTC &= ~LEDMask;
- #else
- PORTD &= ~LEDMask;
- #endif
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- #if (BOARD == BOARD_USB2AX)
- PORTC = ((PORTC & ~LEDS_ALL_LEDS) | LEDMask);
- #else
- PORTD = ((PORTD & ~LEDS_ALL_LEDS) | LEDMask);
- #endif
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- #if (BOARD == BOARD_USB2AX)
- PORTC = ((PORTC & ~LEDMask) | ActiveMask);
- #else
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- #endif
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- #if (BOARD == BOARD_USB2AX)
- PINC = LEDMask;
- #else
- PIND = LEDMask;
- #endif
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- #if (BOARD == BOARD_USB2AX)
- return (PORTC & LEDS_ALL_LEDS);
- #else
- return (PORTD & LEDS_ALL_LEDS);
- #endif
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h deleted file mode 100644 index 876939cb7..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBFOO/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Kernel Concepts USBFOO.
- * \copydetails Group_Buttons_USBFOO
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_USBFOO USBFOO
- * \brief Board specific Buttons driver header for the Kernel Concepts USBFOO.
- *
- * Board specific Buttons driver header for the Kernel Concepts USBFOO (http://shop.kernelconcepts.de/product_info.php?products_id=102).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_USBFOO_H__
-#define __BUTTONS_USBFOO_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h deleted file mode 100644 index 7d093df18..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBFOO/LEDs.h +++ /dev/null @@ -1,135 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Kernel Concepts USBFOO.
- * \copydetails Group_LEDs_USBFOO
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_USBFOO USBFOO
- * \brief Board specific LED driver header for the Kernel Concepts USBFOO.
- *
- * Board specific LED driver header for the Kernel Concepts USBFOO (http://shop.kernelconcepts.de/product_info.php?products_id=102).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTD.4</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_USBFOO_H__
-#define __LEDS_USBFOO_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD |= LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD | LEDS_ALL_LEDS) & ~LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD | LEDMask) & ~ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (~PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h deleted file mode 100644 index 63a3ae274..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Atmel USBKEY.
- * \copydetails Group_Buttons_USBKEY
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_USBKEY USBKEY
- * \brief Board specific Buttons driver header for the Atmel USBKEY.
- *
- * Board specific Buttons driver header for the Atmel USBKEY.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTE.2</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_USBKEY_H__
-#define __BUTTONS_USBKEY_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 2)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRE &= ~BUTTONS_BUTTON1;
- PORTE &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PINE & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h deleted file mode 100644 index c47cfa9c2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h +++ /dev/null @@ -1,229 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Dataflash driver header for the Atmel USBKEY.
- * \copydetails Group_Dataflash_USBKEY
- *
- * \note This file should not be included directly. It is automatically included as needed by the dataflash driver
- * dispatch header located in LUFA/Drivers/Board/Dataflash.h.
- */
-
-/** \ingroup Group_Dataflash
- * \defgroup Group_Dataflash_USBKEY USBKEY
- * \brief Board specific Dataflash driver header for the Atmel USBKEY.
- *
- * Board specific Dataflash driver header for the Atmel USBKEY board.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
- * <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTE.0</td><td>SPI0</td></tr>
- * <tr><td>DATAFLASH_CHIP2</td><td>AT45DB642D (8MB)</td><td>PORTE.1</td><td>SPI0</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __DATAFLASH_USBKEY_H__
-#define __DATAFLASH_USBKEY_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../../../Misc/AT45DB642D.h"
- #include "../../../Peripheral/SPI.h"
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_DATAFLASH_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define DATAFLASH_CHIPCS_MASK ((1 << 1) | (1 << 0))
- #define DATAFLASH_CHIPCS_DDR DDRE
- #define DATAFLASH_CHIPCS_PORT PORTE
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Constant indicating the total number of dataflash ICs mounted on the selected board. */
- #define DATAFLASH_TOTALCHIPS 2
-
- /** Mask for no dataflash chip selected. */
- #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK
-
- /** Mask for the first dataflash chip selected. */
- #define DATAFLASH_CHIP1 (1 << 1)
-
- /** Mask for the second dataflash chip selected. */
- #define DATAFLASH_CHIP2 (1 << 0)
-
- /** Internal main memory page size for the board's dataflash ICs. */
- #define DATAFLASH_PAGE_SIZE 1024
-
- /** Total number of pages inside each of the board's dataflash ICs. */
- #define DATAFLASH_PAGES 8192
-
- /* Inline Functions: */
- /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
- * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
- */
- static inline void Dataflash_Init(void)
- {
- DATAFLASH_CHIPCS_DDR |= DATAFLASH_CHIPCS_MASK;
- DATAFLASH_CHIPCS_PORT |= DATAFLASH_CHIPCS_MASK;
- }
-
- /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
- {
- return SPI_TransferByte(Byte);
- }
-
- /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- */
- static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SendByte(const uint8_t Byte)
- {
- SPI_SendByte(Byte);
- }
-
- /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_ReceiveByte(void)
- {
- return SPI_ReceiveByte();
- }
-
- /** Determines the currently selected dataflash chip.
- *
- * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
- * or a DATAFLASH_CHIPn mask (where n is the chip number).
- */
- static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_GetSelectedChip(void)
- {
- return (DATAFLASH_CHIPCS_PORT & DATAFLASH_CHIPCS_MASK);
- }
-
- /** Selects the given dataflash chip.
- *
- * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of DATAFLASH_CHIPn mask (where n is
- * the chip number).
- */
- static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SelectChip(const uint8_t ChipMask)
- {
- DATAFLASH_CHIPCS_PORT = ((DATAFLASH_CHIPCS_PORT & ~DATAFLASH_CHIPCS_MASK) | ChipMask);
- }
-
- /** Deselects the current dataflash chip, so that no dataflash is selected. */
- static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_DeselectChip(void)
- {
- Dataflash_SelectChip(DATAFLASH_NO_CHIP);
- }
-
- /** Selects a dataflash IC from the given page number, which should range from 0 to
- * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
- * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside
- * the total number of pages contained in the boards dataflash ICs, all dataflash ICs
- * are deselected.
- *
- * \param[in] PageAddress Address of the page to manipulate, ranging from
- * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
- */
- static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
- {
- Dataflash_DeselectChip();
-
- if (PageAddress >= (DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS))
- return;
-
- if (PageAddress & 0x01)
- Dataflash_SelectChip(DATAFLASH_CHIP2);
- else
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- }
-
- /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive
- * a new command.
- */
- static inline void Dataflash_ToggleSelectedChipCS(void)
- {
- uint8_t SelectedChipMask = Dataflash_GetSelectedChip();
-
- Dataflash_DeselectChip();
- Dataflash_SelectChip(SelectedChipMask);
- }
-
- /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main
- * memory page program or main memory to buffer transfer.
- */
- static inline void Dataflash_WaitWhileBusy(void)
- {
- Dataflash_ToggleSelectedChipCS();
- Dataflash_SendByte(DF_CMD_GETSTATUS);
- while (!(Dataflash_ReceiveByte() & DF_STATUS_READY));
- Dataflash_ToggleSelectedChipCS();
- }
-
- /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
- * dataflash commands which require a complete 24-bit address.
- *
- * \param[in] PageAddress Page address within the selected dataflash IC
- * \param[in] BufferByte Address within the dataflash's buffer
- */
- static inline void Dataflash_SendAddressBytes(uint16_t PageAddress,
- const uint16_t BufferByte)
- {
- PageAddress >>= 1;
-
- Dataflash_SendByte(PageAddress >> 5);
- Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8));
- Dataflash_SendByte(BufferByte);
- }
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h deleted file mode 100644 index 9e9320ea0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/Joystick.h +++ /dev/null @@ -1,130 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific joystick driver header for the Atmel USBKEY.
- * \copydetails Group_Joystick_USBKEY
- *
- * \note This file should not be included directly. It is automatically included as needed by the joystick driver
- * dispatch header located in LUFA/Drivers/Board/Joystick.h.
- */
-
-/** \ingroup Group_Joystick
- * \defgroup Group_Joystick_USBKEY USBKEY
- * \brief Board specific joystick driver header for the Atmel USBKEY.
- *
- * Board specific joystick driver header for the Atmel USBKEY.
- *
- * <table>
- * <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
- * <tr><td>PORTB.6</td><td>PORTB.7</td><td>PORTE.4</td><td>PORTE.5</td><td>PORTB.5</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __JOYSTICK_USBKEY_H__
-#define __JOYSTICK_USBKEY_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_JOYSTICK_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define JOY_BMASK ((1 << 5) | (1 << 6) | (1 << 7))
- #define JOY_EMASK ((1 << 4) | (1 << 5))
-
- #define JOY_PORTE_MASK_SHIFT 1
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask for the joystick being pushed in the left direction. */
- #define JOY_LEFT (1 << 6)
-
- /** Mask for the joystick being pushed in the right direction. */
- #define JOY_RIGHT ((1 << 4) >> JOY_PORTE_MASK_SHIFT)
-
- /** Mask for the joystick being pushed in the upward direction. */
- #define JOY_UP (1 << 7)
-
- /** Mask for the joystick being pushed in the downward direction. */
- #define JOY_DOWN ((1 << 5) >> JOY_PORTE_MASK_SHIFT)
-
- /** Mask for the joystick being pushed inward. */
- #define JOY_PRESS (1 << 5)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Joystick_Init(void)
- {
- DDRB &= ~JOY_BMASK;
- DDRE &= ~JOY_EMASK;
-
- PORTB |= JOY_BMASK;
- PORTE |= JOY_EMASK;
- }
-
- static inline void Joystick_Disable(void)
- {
- DDRB &= ~JOY_BMASK;
- DDRE &= ~JOY_EMASK;
-
- PORTB &= ~JOY_BMASK;
- PORTE &= ~JOY_EMASK;
- }
-
- static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Joystick_GetStatus(void)
- {
- return (((uint8_t)~PINB & JOY_BMASK) | (((uint8_t)~PINE & JOY_EMASK) >> JOY_PORTE_MASK_SHIFT));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h deleted file mode 100644 index 77cab1ecf..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBKEY/LEDs.h +++ /dev/null @@ -1,147 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel USBKEY.
- * \copydetails Group_LEDs_USBKEY
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_USBKEY USBKEY
- * \brief Board specific LED driver header for the Atmel USBKEY.
- *
- * Board specific LED driver header for the Atmel USBKEY.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Red</td><td>Bicolor Indicator 1</td><td>Low</td><td>PORTD.4</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>Bicolor Indicator 1</td><td>Low</td><td>PORTD.5</td></tr>
- * <tr><td>LEDS_LED3</td><td>Red</td><td>Bicolor Indicator 2</td><td>Low</td><td>PORTD.6</td></tr>
- * <tr><td>LEDS_LED4</td><td>Green</td><td>Bicolor Indicator 2</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_USBKEY_H__
-#define __LEDS_USBKEY_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 5)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 7)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 (1 << 6)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRD |= LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRD &= ~LEDS_ALL_LEDS;
- PORTD &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTD |= LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTD &= ~LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTD = ((PORTD & ~LEDS_ALL_LEDS) | LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTD = ((PORTD & ~LEDMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PIND = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTD & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h deleted file mode 100644 index 29e73b7b5..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBTINYMKII/Buttons.h +++ /dev/null @@ -1,103 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for Tom's USBTINY MKII.
- * \copydetails Group_Buttons_USBTINYMKII
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_USBTINYMKII USBTINYMKII
- * \brief Board specific Buttons driver header for Tom's USBTINY MKII.
- *
- * Board specific Buttons driver header for Tom's USBTINY MKII (http://tom-itx.dyndns.org:81/~webpage/).
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>HWB Button</td><td>Low</td><td>PORTD.7</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_USBTINYMKII_H__
-#define __BUTTONS_USBTINYMKII_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 7)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD |= BUTTONS_BUTTON1;
- }
-
- static inline void Buttons_Disable(void)
- {
- DDRD &= ~BUTTONS_BUTTON1;
- PORTD &= ~BUTTONS_BUTTON1;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PIND & BUTTONS_BUTTON1) ^ BUTTONS_BUTTON1);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h deleted file mode 100644 index 0e6192ee3..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/USBTINYMKII/LEDs.h +++ /dev/null @@ -1,143 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for Tom's USBTINY MKII.
- * \copydetails Group_LEDs_USBTINYMKII
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_USBTINYMKII USBTINYMKII
- * \brief Board specific LED driver header for Tom's USBTINY MKII.
- *
- * Board specific LED driver header for Tom's USBTINY MKII (http://tom-itx.dyndns.org:81/~webpage/).
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Red</td><td>Bicolor Indicator 1</td><td>High</td><td>PORTB.6</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>Bicolor Indicator 1</td><td>High</td><td>PORTB.7</td></tr>
- * <tr><td>LEDS_LED3</td><td>Red</td><td>Target Power</td><td>High</td><td>PORTB.5</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_USBTINYMKII_H__
-#define __LEDS_USBTINYMKII_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 6)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 7)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 5)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRB |= LEDS_ALL_LEDS;
- PORTB &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRB &= ~LEDS_ALL_LEDS;
- PORTB &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LedMask)
- {
- PORTB |= LedMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LedMask)
- {
- PORTB &= ~LedMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LedMask)
- {
- PORTB = ((PORTB & ~LEDS_ALL_LEDS) | LedMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LedMask,
- const uint8_t ActiveMask)
- {
- PORTB = ((PORTB & ~LedMask) | ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINB = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTB & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h deleted file mode 100644 index ef428b0dc..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h +++ /dev/null @@ -1,243 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Dataflash driver header for the original Atmel XPLAIN.
- * \copydetails Group_Dataflash_XPLAIN
- *
- * \note This file should not be included directly. It is automatically included as needed by the dataflash driver
- * dispatch header located in LUFA/Drivers/Board/Dataflash.h.
- */
-
-/** \ingroup Group_Dataflash
- * \defgroup Group_Dataflash_XPLAIN_REV1 XPLAIN_REV1
- * \brief Board specific Dataflash driver header for the original Atmel XPLAIN, revision 1.
- *
- * See \ref Group_Dataflash_XPLAIN for more details.
- */
-
-/** \ingroup Group_Dataflash
- * \defgroup Group_Dataflash_XPLAIN XPLAIN
- * \brief Board specific Dataflash driver header for the original Atmel XPLAIN.
- *
- * \note For the first revision XPLAIN board, compile with <code>BOARD = BOARD_XPLAIN_REV1</code>.
- *
- * Board specific Dataflash driver header for the Atmel XPLAIN.
- *
- * <b>Revision 1 Boards</b>:
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
- * <tr><td>DATAFLASH_CHIP1</td><td>AT45DB041D (512KB)</td><td>PORTB.5</td><td>SPI0</td></tr>
- * </table>
- *
- * <b>Other Board Revisions</b>:
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
- * <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTB.5</td><td>SPI0</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __DATAFLASH_XPLAIN_H__
-#define __DATAFLASH_XPLAIN_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- #include "../../../Misc/AT45DB642D.h"
- #include "../../../Peripheral/SPI.h"
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_DATAFLASH_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define DATAFLASH_CHIPCS_MASK (1 << 5)
- #define DATAFLASH_CHIPCS_DDR DDRB
- #define DATAFLASH_CHIPCS_PORT PORTB
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Constant indicating the total number of dataflash ICs mounted on the selected board. */
- #define DATAFLASH_TOTALCHIPS 1
-
- /** Mask for no dataflash chip selected. */
- #define DATAFLASH_NO_CHIP DATAFLASH_CHIPCS_MASK
-
- /** Mask for the first dataflash chip selected. */
- #define DATAFLASH_CHIP1 0
-
- #if ((BOARD != BOARD_XPLAIN_REV1) || defined(__DOXYGEN__))
- /** Internal main memory page size for the board's dataflash ICs. */
- #define DATAFLASH_PAGE_SIZE 1024
-
- /** Total number of pages inside each of the board's dataflash ICs. */
- #define DATAFLASH_PAGES 8192
- #else
- #define DATAFLASH_PAGE_SIZE 256
-
- #define DATAFLASH_PAGES 2048
- #endif
-
- /* Inline Functions: */
- /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
- * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
- */
- static inline void Dataflash_Init(void)
- {
- DATAFLASH_CHIPCS_DDR |= DATAFLASH_CHIPCS_MASK;
- DATAFLASH_CHIPCS_PORT |= DATAFLASH_CHIPCS_MASK;
- }
-
- /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
- {
- return SPI_TransferByte(Byte);
- }
-
- /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- */
- static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SendByte(const uint8_t Byte)
- {
- SPI_SendByte(Byte);
- }
-
- /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_ReceiveByte(void)
- {
- return SPI_ReceiveByte();
- }
-
- /** Determines the currently selected dataflash chip.
- *
- * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
- * or a DATAFLASH_CHIPn mask (where n is the chip number).
- */
- static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_GetSelectedChip(void)
- {
- return (DATAFLASH_CHIPCS_PORT & DATAFLASH_CHIPCS_MASK);
- }
-
- /** Selects the given dataflash chip.
- *
- * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of DATAFLASH_CHIPn mask (where n is
- * the chip number).
- */
- static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SelectChip(const uint8_t ChipMask)
- {
- DATAFLASH_CHIPCS_PORT = ((DATAFLASH_CHIPCS_PORT & ~DATAFLASH_CHIPCS_MASK) | ChipMask);
- }
-
- /** Deselects the current dataflash chip, so that no dataflash is selected. */
- static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_DeselectChip(void)
- {
- Dataflash_SelectChip(DATAFLASH_NO_CHIP);
- }
-
- /** Selects a dataflash IC from the given page number, which should range from 0 to
- * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
- * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside
- * the total number of pages contained in the boards dataflash ICs, all dataflash ICs
- * are deselected.
- *
- * \param[in] PageAddress Address of the page to manipulate, ranging from
- * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
- */
- static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
- {
- Dataflash_DeselectChip();
-
- if (PageAddress >= DATAFLASH_PAGES)
- return;
-
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- }
-
- /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive
- * a new command.
- */
- static inline void Dataflash_ToggleSelectedChipCS(void)
- {
- uint8_t SelectedChipMask = Dataflash_GetSelectedChip();
-
- Dataflash_DeselectChip();
- Dataflash_SelectChip(SelectedChipMask);
- }
-
- /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main
- * memory page program or main memory to buffer transfer.
- */
- static inline void Dataflash_WaitWhileBusy(void)
- {
- Dataflash_ToggleSelectedChipCS();
- Dataflash_SendByte(DF_CMD_GETSTATUS);
- while (!(Dataflash_ReceiveByte() & DF_STATUS_READY));
- Dataflash_ToggleSelectedChipCS();
- }
-
- /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
- * dataflash commands which require a complete 24-bit address.
- *
- * \param[in] PageAddress Page address within the selected dataflash IC
- * \param[in] BufferByte Address within the dataflash's buffer
- */
- static inline void Dataflash_SendAddressBytes(uint16_t PageAddress,
- const uint16_t BufferByte)
- {
- Dataflash_SendByte(PageAddress >> 5);
- Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8));
- Dataflash_SendByte(BufferByte);
- }
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h deleted file mode 100644 index c7d74591d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/AVR8/XPLAIN/LEDs.h +++ /dev/null @@ -1,142 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the original Atmel XPLAIN.
- * \copydetails Group_LEDs_XPLAIN
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_XPLAIN_REV1 XPLAIN_REV1
- * \brief Board specific LED driver header for the original Atmel XPLAIN, revision 1.
- *
- * See \ref Group_LEDs_XPLAIN for more details.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_XPLAIN XPLAIN
- * \brief Board specific LED driver header for the original Atmel XPLAIN.
- *
- * Board specific LED driver header for the Atmel XPLAIN.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>General Indicator</td><td>Low</td><td>PORTB.6</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_XPLAIN_H__
-#define __LEDS_XPLAIN_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 6)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS LEDS_LED1
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- DDRB |= LEDS_ALL_LEDS;
- PORTB |= LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- DDRB &= ~LEDS_ALL_LEDS;
- PORTB &= ~LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTB &= ~LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTB |= LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTB = ((PORTB | LEDS_ALL_LEDS) & ~LEDMask);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask,
- const uint8_t ActiveMask)
- {
- PORTB = ((PORTB | LEDMask) & ~ActiveMask);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PINB = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (~PORTB & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Buttons.h deleted file mode 100644 index c5c09bedb..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Buttons.h +++ /dev/null @@ -1,178 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Digital button board hardware driver.
- *
- * This file is the master dispatch header file for the board-specific Buttons driver, for boards containing
- * physical pushbuttons connected to the microcontroller's GPIO pins.
- *
- * User code should include this file, which will in turn include the correct Button driver header file for the
- * currently selected board.
- *
- * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Buttons.h file in the user project
- * directory.
- *
- * For possible \c BOARD makefile values, see \ref Group_BoardTypes.
- */
-
-/** \ingroup Group_BoardDrivers
- * \defgroup Group_Buttons Buttons Driver - LUFA/Drivers/Board/Buttons.h
- * \brief Digital button board hardware driver.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Hardware buttons driver. This provides an easy to use driver for the hardware buttons present on many boards.
- * It provides a way to easily configure and check the status of all the buttons on the board so that appropriate
- * actions can be taken.
- *
- * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Buttons.h file in the user project
- * directory. Otherwise, it will include the appropriate built in board driver header file.
- *
- * For possible \c BOARD makefile values, see \ref Group_BoardTypes.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the button driver before first use
- * Buttons_Init();
- *
- * printf("Waiting for button press...\r\n");
- *
- * // Loop until a board button has been pressed
- * uint8_t ButtonPress;
- * while (!(ButtonPress = Buttons_GetStatus())) {};
- *
- * // Display which button was pressed (assuming two board buttons)
- * printf("Button pressed: %s\r\n", (ButtonPress == BUTTONS_BUTTON1) ? "Button 1" : "Button 2");
- * \endcode
- *
- * @{
- */
-
-#ifndef __BUTTONS_H__
-#define __BUTTONS_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_BUTTONS_H
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- #if (BOARD == BOARD_NONE)
- #error The Board Buttons driver cannot be used if the makefile BOARD option is not set.
- #elif (BOARD == BOARD_USBKEY)
- #include "AVR8/USBKEY/Buttons.h"
- #elif (BOARD == BOARD_STK525)
- #include "AVR8/STK525/Buttons.h"
- #elif (BOARD == BOARD_STK526)
- #include "AVR8/STK526/Buttons.h"
- #elif (BOARD == BOARD_ATAVRUSBRF01)
- #include "AVR8/ATAVRUSBRF01/Buttons.h"
- #elif (BOARD == BOARD_BUMBLEB)
- #include "AVR8/BUMBLEB/Buttons.h"
- #elif (BOARD == BOARD_EVK527)
- #include "AVR8/EVK527/Buttons.h"
- #elif (BOARD == BOARD_USBTINYMKII)
- #include "AVR8/USBTINYMKII/Buttons.h"
- #elif (BOARD == BOARD_BENITO)
- #include "AVR8/BENITO/Buttons.h"
- #elif (BOARD == BOARD_JMDBU2)
- #include "AVR8/JMDBU2/Buttons.h"
- #elif (BOARD == BOARD_OLIMEX162)
- #include "AVR8/OLIMEX162/Buttons.h"
- #elif (BOARD == BOARD_USBFOO)
- #include "AVR8/USBFOO/Buttons.h"
- #elif (BOARD == BOARD_UDIP)
- #include "AVR8/UDIP/Buttons.h"
- #elif (BOARD == BOARD_CULV3)
- #include "AVR8/CULV3/Buttons.h"
- #elif (BOARD == BOARD_MINIMUS)
- #include "AVR8/MINIMUS/Buttons.h"
- #elif (BOARD == BOARD_MICROSIN162)
- #include "AVR8/MICROSIN162/Buttons.h"
- #elif (BOARD == BOARD_EVK1101)
- #include "UC3/EVK1101/Buttons.h"
- #elif (BOARD == BOARD_TUL)
- #include "AVR8/TUL/Buttons.h"
- #elif (BOARD == BOARD_EVK1100)
- #include "UC3/EVK1100/Buttons.h"
- #elif (BOARD == BOARD_EVK1104)
- #include "UC3/EVK1104/Buttons.h"
- #elif (BOARD == BOARD_A3BU_XPLAINED)
- #include "XMEGA/A3BU_XPLAINED/Buttons.h"
- #elif ((BOARD == BOARD_USB2AX) || (BOARD == BOARD_USB2AX_V3))
- #include "AVR8/USB2AX/Buttons.h"
- #elif ((BOARD == BOARD_MICROPENDOUS_32U2) || (BOARD == BOARD_MICROPENDOUS_A) || \
- (BOARD == BOARD_MICROPENDOUS_1) || (BOARD == BOARD_MICROPENDOUS_2) || \
- (BOARD == BOARD_MICROPENDOUS_3) || (BOARD == BOARD_MICROPENDOUS_4) || \
- (BOARD == BOARD_MICROPENDOUS_REV1) || (BOARD == BOARD_MICROPENDOUS_REV2) || \
- (BOARD == BOARD_MICROPENDOUS_DIP))
- #include "AVR8/MICROPENDOUS/Buttons.h"
- #elif (BOARD == BOARD_B1_XPLAINED)
- #include "XMEGA/B1_XPLAINED/Buttons.h"
- #elif (BOARD == BOARD_OLIMEX32U4)
- #include "AVR8/OLIMEX32U4/Buttons.h"
- #elif (BOARD == BOARD_OLIMEXT32U4)
- #include "AVR8/OLIMEXT32U4/Buttons.h"
- #elif (BOARD == BOARD_OLIMEXISPMK2)
- #include "AVR8/OLIMEXISPMK2/Buttons.h"
- #else
- #include "Board/Buttons.h"
- #endif
-
- /* Pseudo-Functions for Doxygen: */
- #if defined(__DOXYGEN__)
- /** Initializes the buttons driver, so that the current button position can be read. This sets the appropriate
- * I/O pins to an inputs with pull-ups enabled.
- *
- * This must be called before any Button driver functions are used.
- */
- static inline void Buttons_Init(void);
-
- /** Disables the buttons driver, releasing the I/O pins back to their default high-impedance input mode. */
- static inline void Buttons_Disable(void);
-
- /** Returns a mask indicating which board buttons are currently pressed.
- *
- * \return Mask indicating which board buttons are currently pressed.
- */
- static inline uint_reg_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Dataflash.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Dataflash.h deleted file mode 100644 index 944ea5ffe..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Dataflash.h +++ /dev/null @@ -1,252 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the board dataflash IC driver.
- * \brief Atmel Dataflash storage IC board hardware driver.
- *
- * This file is the master dispatch header file for the board-specific Atmel dataflash driver, for boards containing
- * Atmel Dataflash ICs for external non-volatile storage.
- *
- * User code should include this file, which will in turn include the correct dataflash driver header file for
- * the currently selected board.
- *
- * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Dataflash.h file in the user project
- * directory.
- *
- * For possible \c BOARD makefile values, see \ref Group_BoardTypes.
- */
-
-/** \ingroup Group_BoardDrivers
- * \defgroup Group_Dataflash Dataflash Driver - LUFA/Drivers/Board/Dataflash.h
- * \brief Atmel Dataflash storage IC board hardware driver.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Dataflash driver. This module provides an easy to use interface for the Dataflash ICs located on many boards,
- * for the storage of large amounts of data into the Dataflash's non-volatile memory.
- *
- * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Dataflash.h file in the user project
- * directory. Otherwise, it will include the appropriate built in board driver header file.
- *
- * For possible \c BOARD makefile values, see \ref Group_BoardTypes.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the SPI and board Dataflash drivers before first use
- * SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
- * SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
- * Dataflash_Init();
- *
- * uint8_t WriteBuffer[DATAFLASH_PAGE_SIZE];
- * uint8_t ReadBuffer[DATAFLASH_PAGE_SIZE];
- *
- * // Fill page write buffer with a repeating pattern
- * for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
- * WriteBuffer[i] = (i & 0xFF);
- *
- * // Must select the chip of interest first before operating on it
- * Dataflash_SelectChip(DATAFLASH_CHIP1);
- *
- * // Write to the Dataflash's first internal memory buffer
- * printf("Writing data to first dataflash buffer:\r\n");
- * Dataflash_SendByte(DF_CMD_BUFF1WRITE);
- * Dataflash_SendAddressBytes(0, 0);
- *
- * for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
- * Dataflash_SendByte(WriteBuffer[i]);
- *
- * // Commit the Dataflash's first memory buffer to the non-volatile FLASH memory
- * printf("Committing page to non-volatile memory page index 5:\r\n");
- * Dataflash_SendByte(DF_CMD_BUFF1TOMAINMEMWITHERASE);
- * Dataflash_SendAddressBytes(5, 0);
- * Dataflash_WaitWhileBusy();
- *
- * // Read the page from non-volatile FLASH memory into the Dataflash's second memory buffer
- * printf("Reading data into second dataflash buffer:\r\n");
- * Dataflash_SendByte(DF_CMD_MAINMEMTOBUFF2);
- * Dataflash_SendAddressBytes(5, 0);
- * Dataflash_WaitWhileBusy();
- *
- * // Read the Dataflash's second internal memory buffer
- * Dataflash_SendByte(DF_CMD_BUFF2READ);
- * Dataflash_SendAddressBytes(0, 0);
- *
- * for (uint16_t i = 0; i < DATAFLASH_PAGE_SIZE; i++)
- * ReadBuffer[i] = Dataflash_ReceiveByte();
- *
- * // Deselect the chip after use
- * Dataflash_DeselectChip();
- * \endcode
- *
- * @{
- */
-
-#ifndef __DATAFLASH_H__
-#define __DATAFLASH_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_DATAFLASH_H
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if !defined(__DOXYGEN__)
- #define __GET_DATAFLASH_MASK2(x, y) x ## y
- #define __GET_DATAFLASH_MASK(x) __GET_DATAFLASH_MASK2(DATAFLASH_CHIP,x)
- #endif
-
- /** Retrieves the Dataflash chip select mask for the given Dataflash chip index.
- *
- * \param[in] index Index of the dataflash chip mask to retrieve
- *
- * \return Mask for the given Dataflash chip's /CS pin
- */
- #define DATAFLASH_CHIP_MASK(index) __GET_DATAFLASH_MASK(index)
-
- /* Inline Functions: */
- /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
- *
- * \note The microcontroller's physical interface driver connected to the Dataflash IC must be initialized before
- * any of the dataflash commands are used. This is usually a SPI hardware port, but on some devices/boards may
- * be a USART operating in SPI Master mode.
- */
- static inline void Dataflash_Init(void);
-
- /** Determines the currently selected dataflash chip.
- *
- * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
- * or a \c DATAFLASH_CHIPn mask (where n is the chip number).
- */
- static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
-
- /** Selects the given dataflash chip.
- *
- * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of \c DATAFLASH_CHIPn mask (where n is
- * the chip number).
- */
- static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
-
- /** Deselects the current dataflash chip, so that no dataflash is selected. */
- static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE;
-
- /** Selects a dataflash IC from the given page number, which should range from 0 to
- * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
- * dataflash IC, this will select \ref DATAFLASH_CHIP1. If the given page number is outside
- * the total number of pages contained in the boards dataflash ICs, all dataflash ICs
- * are deselected.
- *
- * \param[in] PageAddress Address of the page to manipulate, ranging from
- * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
- */
- static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress);
-
- /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive
- * a new command.
- */
- static inline void Dataflash_ToggleSelectedChipCS(void);
-
- /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main
- * memory page program or main memory to buffer transfer.
- */
- static inline void Dataflash_WaitWhileBusy(void);
-
- /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
- * dataflash commands which require a complete 24-bit address.
- *
- * \param[in] PageAddress Page address within the selected dataflash IC
- * \param[in] BufferByte Address within the dataflash's buffer
- */
- static inline void Dataflash_SendAddressBytes(uint16_t PageAddress,
- const uint16_t BufferByte);
-
- /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
-
- /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- */
- static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
-
- /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
-
- /* Includes: */
- #if (BOARD == BOARD_NONE)
- #error The Board Dataflash driver cannot be used if the makefile BOARD option is not set.
- #elif (BOARD == BOARD_USBKEY)
- #include "AVR8/USBKEY/Dataflash.h"
- #elif (BOARD == BOARD_STK525)
- #include "AVR8/STK525/Dataflash.h"
- #elif (BOARD == BOARD_STK526)
- #include "AVR8/STK526/Dataflash.h"
- #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
- #include "AVR8/XPLAIN/Dataflash.h"
- #elif (BOARD == BOARD_EVK527)
- #include "AVR8/EVK527/Dataflash.h"
- #elif (BOARD == BOARD_A3BU_XPLAINED)
- #include "XMEGA/A3BU_XPLAINED/Dataflash.h"
- #elif (BOARD == BOARD_B1_XPLAINED)
- #include "XMEGA/B1_XPLAINED/Dataflash.h"
- #else
- #include "Board/Dataflash.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Joystick.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Joystick.h deleted file mode 100644 index 640939a93..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Joystick.h +++ /dev/null @@ -1,144 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Digital joystick board hardware driver.
- *
- * This file is the master dispatch header file for the board-specific Joystick driver, for boards containing a
- * digital joystick.
- *
- * User code should include this file, which will in turn include the correct joystick driver header file for the
- * currently selected board.
- *
- * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Joystick.h file in the user project
- * directory.
- *
- * For possible \c BOARD makefile values, see \ref Group_BoardTypes.
- */
-
-/** \ingroup Group_BoardDrivers
- * \defgroup Group_Joystick Joystick Driver - LUFA/Drivers/Board/Joystick.h
- * \brief Digital joystick board hardware driver.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Hardware Joystick driver. This module provides an easy to use interface to control the hardware digital Joystick
- * located on many boards.
- *
- * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Joystick.h file in the user project
- * directory. Otherwise, it will include the appropriate built in board driver header file.
- *
- * For possible \c BOARD makefile values, see \ref Group_BoardTypes.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the board Joystick driver before first use
- * Joystick_Init();
- *
- * printf("Waiting for joystick movement...\r\n");
- *
- * // Loop until a the joystick has been moved
- * uint8_t JoystickMovement;
- * while (!(JoystickMovement = Joystick_GetStatus())) {};
- *
- * // Display which direction the joystick was moved in
- * printf("Joystick moved:\r\n");
- *
- * if (JoystickMovement & (JOY_UP | JOY_DOWN))
- * printf("%s ", (JoystickMovement & JOY_UP) ? "Up" : "Down");
- *
- * if (JoystickMovement & (JOY_LEFT | JOY_RIGHT))
- * printf("%s ", (JoystickMovement & JOY_LEFT) ? "Left" : "Right");
- *
- * if (JoystickMovement & JOY_PRESS)
- * printf("Pressed");
- * \endcode
- *
- * @{
- */
-
-#ifndef __JOYSTICK_H__
-#define __JOYSTICK_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_JOYSTICK_H
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- #if (BOARD == BOARD_NONE)
- #error The Board Joystick driver cannot be used if the makefile BOARD option is not set.
- #elif (BOARD == BOARD_USBKEY)
- #include "AVR8/USBKEY/Joystick.h"
- #elif (BOARD == BOARD_STK525)
- #include "AVR8/STK525/Joystick.h"
- #elif (BOARD == BOARD_STK526)
- #include "AVR8/STK526/Joystick.h"
- #elif (BOARD == BOARD_BUMBLEB)
- #include "AVR8/BUMBLEB/Joystick.h"
- #elif (BOARD == BOARD_EVK527)
- #include "AVR8/EVK527/Joystick.h"
- #elif (BOARD == BOARD_EVK1101)
- #include "UC3/EVK1101/Joystick.h"
- #elif (BOARD == BOARD_EVK1100)
- #include "UC3/EVK1100/Joystick.h"
- #else
- #include "Board/Joystick.h"
- #endif
-
- /* Pseudo-Functions for Doxygen: */
- #if defined(__DOXYGEN__)
- /** Initializes the joystick driver so that the joystick position can be read. This sets the appropriate
- * I/O pins to inputs with their pull-ups enabled.
- */
- static inline void Joystick_Init(void);
-
- /** Disables the joystick driver, releasing the I/O pins back to their default high-impedance input mode. */
- static inline void Joystick_Disable(void);
-
- /** Returns the current status of the joystick, as a mask indicating the direction the joystick is
- * currently facing in (multiple bits can be set).
- *
- * \return Mask indicating the joystick direction - see corresponding board specific Joystick.h file
- * for direction masks.
- */
- static inline uint_reg_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/LEDs.h deleted file mode 100644 index 96438d0da..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/LEDs.h +++ /dev/null @@ -1,274 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief LED board hardware driver.
- *
- * This file is the master dispatch header file for the board-specific LED driver, for boards containing user
- * controllable LEDs.
- *
- * User code should include this file, which will in turn include the correct LED driver header file for the
- * currently selected board.
- *
- * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/LEDs.h file in the user project
- * directory.
- *
- * For possible \c BOARD makefile values, see \ref Group_BoardTypes.
- */
-
-/** \ingroup Group_BoardDrivers
- * \defgroup Group_LEDs LEDs Driver - LUFA/Drivers/Board/LEDs.h
- * \brief LED board hardware driver.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Hardware LEDs driver. This provides an easy to use driver for the hardware LEDs present on many boards. It
- * provides an interface to configure, test and change the status of all the board LEDs.
- *
- * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/LEDs.h file in the user project
- * directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value
- * is set to \c BOARD_NONE, this driver is silently disabled.
- *
- * For possible \c BOARD makefile values, see \ref Group_BoardTypes.
- *
- * \note To make code as compatible as possible, it is assumed that all boards carry a minimum of four LEDs. If
- * a board contains less than four LEDs, the remaining LED masks are defined to 0 so as to have no effect.
- * If other behavior is desired, either alias the remaining LED masks to existing LED masks via the -D
- * switch in the project makefile, or alias them to nothing in the makefile to cause compilation errors when
- * a non-existing LED is referenced in application code. Note that this means that it is possible to make
- * compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
- * which contains only stub functions and defines no LEDs.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the board LED driver before first use
- * LEDs_Init();
- *
- * // Turn on each of the four LEDs in turn
- * LEDs_SetAllLEDs(LEDS_LED1);
- * Delay_MS(500);
- * LEDs_SetAllLEDs(LEDS_LED2);
- * Delay_MS(500);
- * LEDs_SetAllLEDs(LEDS_LED3);
- * Delay_MS(500);
- * LEDs_SetAllLEDs(LEDS_LED4);
- * Delay_MS(500);
- *
- * // Turn on all LEDs
- * LEDs_SetAllLEDs(LEDS_ALL_LEDS);
- * Delay_MS(1000);
- *
- * // Turn on LED 1, turn off LED 2, leaving LEDs 3 and 4 in their current state
- * LEDs_ChangeLEDs((LEDS_LED1 | LEDS_LED2), LEDS_LED1);
- * \endcode
- *
- * @{
- */
-
-#ifndef __LEDS_H__
-#define __LEDS_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_LEDS_H
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- #if (BOARD == BOARD_NONE)
- static inline void LEDs_Init(void) {};
- static inline void LEDs_Disable(void) {};
- static inline void LEDs_TurnOnLEDs(const uint_reg_t LEDMask) {};
- static inline void LEDs_TurnOffLEDs(const uint_reg_t LEDMask) {};
- static inline void LEDs_SetAllLEDs(const uint_reg_t LEDMask) {};
- static inline void LEDs_ChangeLEDs(const uint_reg_t LEDMask, const uint_reg_t ActiveMask) {};
- static inline void LEDs_ToggleLEDs(const uint_reg_t LEDMask) {};
- static inline uint_reg_t LEDs_GetLEDs(void) { return 0; }
- #elif (BOARD == BOARD_USBKEY)
- #include "AVR8/USBKEY/LEDs.h"
- #elif (BOARD == BOARD_STK525)
- #include "AVR8/STK525/LEDs.h"
- #elif (BOARD == BOARD_STK526)
- #include "AVR8/STK526/LEDs.h"
- #elif (BOARD == BOARD_RZUSBSTICK)
- #include "AVR8/RZUSBSTICK/LEDs.h"
- #elif (BOARD == BOARD_ATAVRUSBRF01)
- #include "AVR8/ATAVRUSBRF01/LEDs.h"
- #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
- #include "AVR8/XPLAIN/LEDs.h"
- #elif (BOARD == BOARD_BUMBLEB)
- #include "AVR8/BUMBLEB/LEDs.h"
- #elif (BOARD == BOARD_EVK527)
- #include "AVR8/EVK527/LEDs.h"
- #elif ((BOARD == BOARD_TEENSY) || (BOARD == BOARD_TEENSY2))
- #include "AVR8/TEENSY/LEDs.h"
- #elif (BOARD == BOARD_USBTINYMKII)
- #include "AVR8/USBTINYMKII/LEDs.h"
- #elif (BOARD == BOARD_BENITO)
- #include "AVR8/BENITO/LEDs.h"
- #elif (BOARD == BOARD_JMDBU2)
- #include "AVR8/JMDBU2/LEDs.h"
- #elif (BOARD == BOARD_OLIMEX162)
- #include "AVR8/OLIMEX162/LEDs.h"
- #elif (BOARD == BOARD_USBFOO)
- #include "AVR8/USBFOO/LEDs.h"
- #elif (BOARD == BOARD_UDIP)
- #include "AVR8/UDIP/LEDs.h"
- #elif (BOARD == BOARD_BUI)
- #include "AVR8/BUI/LEDs.h"
- #elif (BOARD == BOARD_UNO)
- #include "AVR8/UNO/LEDs.h"
- #elif (BOARD == BOARD_CULV3)
- #include "AVR8/CULV3/LEDs.h"
- #elif (BOARD == BOARD_BLACKCAT)
- #include "AVR8/BLACKCAT/LEDs.h"
- #elif (BOARD == BOARD_MAXIMUS)
- #include "AVR8/MAXIMUS/LEDs.h"
- #elif (BOARD == BOARD_MINIMUS)
- #include "AVR8/MINIMUS/LEDs.h"
- #elif (BOARD == BOARD_ADAFRUITU4)
- #include "AVR8/ADAFRUITU4/LEDs.h"
- #elif (BOARD == BOARD_MICROSIN162)
- #include "AVR8/MICROSIN162/LEDs.h"
- #elif (BOARD == BOARD_SPARKFUN8U2)
- #include "AVR8/SPARKFUN8U2/LEDs.h"
- #elif (BOARD == BOARD_EVK1101)
- #include "UC3/EVK1101/LEDs.h"
- #elif (BOARD == BOARD_TUL)
- #include "AVR8/TUL/LEDs.h"
- #elif (BOARD == BOARD_EVK1100)
- #include "UC3/EVK1100/LEDs.h"
- #elif (BOARD == BOARD_EVK1104)
- #include "UC3/EVK1104/LEDs.h"
- #elif (BOARD == BOARD_A3BU_XPLAINED)
- #include "XMEGA/A3BU_XPLAINED/LEDs.h"
- #elif ((BOARD == BOARD_USB2AX) || (BOARD == BOARD_USB2AX_V3))
- #include "AVR8/USB2AX/LEDs.h"
- #elif ((BOARD == BOARD_MICROPENDOUS_REV1) || (BOARD == BOARD_MICROPENDOUS_REV2) || \
- (BOARD == BOARD_MICROPENDOUS_32U2))
- #include "AVR8/MICROPENDOUS/LEDs.h"
- #elif (BOARD == BOARD_B1_XPLAINED)
- #include "XMEGA/B1_XPLAINED/LEDs.h"
- #elif (BOARD == BOARD_MULTIO)
- #include "AVR8/MULTIO/LEDs.h"
- #elif (BOARD == BOARD_BIGMULTIO)
- #include "AVR8/BIGMULTIO/LEDs.h"
- #elif (BOARD == BOARD_DUCE)
- #include "AVR8/DUCE/LEDs.h"
- #elif (BOARD == BOARD_OLIMEX32U4)
- #include "AVR8/OLIMEX32U4/LEDs.h"
- #elif (BOARD == BOARD_OLIMEXT32U4)
- #include "AVR8/OLIMEXT32U4/LEDs.h"
- #elif (BOARD == BOARD_OLIMEXISPMK2)
- #include "AVR8/OLIMEXISPMK2/LEDs.h"
- #else
- #include "Board/LEDs.h"
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__DOXYGEN__)
- #if !defined(LEDS_LED1)
- #define LEDS_LED1 0
- #endif
-
- #if !defined(LEDS_LED2)
- #define LEDS_LED2 0
- #endif
-
- #if !defined(LEDS_LED3)
- #define LEDS_LED3 0
- #endif
-
- #if !defined(LEDS_LED4)
- #define LEDS_LED4 0
- #endif
- #endif
-
- /* Pseudo-Functions for Doxygen: */
- #if defined(__DOXYGEN__)
- /** Initializes the board LED driver so that the LEDs can be controlled. This sets the appropriate port
- * I/O pins as outputs, and sets the LEDs to default to off.
- */
- static inline void LEDs_Init(void);
-
- /** Disables the board LED driver, releasing the I/O pins back to their default high-impedance input mode. */
- static inline void LEDs_Disable(void);
-
- /** Turns on the LEDs specified in the given LED mask.
- *
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
- */
- static inline void LEDs_TurnOnLEDs(const uint_reg_t LEDMask);
-
- /** Turns off the LEDs specified in the given LED mask.
- *
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
- */
- static inline void LEDs_TurnOffLEDs(const uint_reg_t LEDMask);
-
- /** Turns off all LEDs not specified in the given LED mask, and turns on all the LEDs in the given LED
- * mask.
- *
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
- */
- static inline void LEDs_SetAllLEDs(const uint_reg_t LEDMask);
-
- /** Turns off all LEDs in the LED mask that are not set in the active mask, and turns on all the LEDs
- * specified in both the LED and active masks.
- *
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
- * \param[in] ActiveMask Mask of whether the LEDs in the LED mask should be turned on or off.
- */
- static inline void LEDs_ChangeLEDs(const uint_reg_t LEDMask,
- const uint_reg_t ActiveMask);
-
- /** Toggles all LEDs in the LED mask, leaving all others in their current states.
- *
- * \param[in] LEDMask Mask of the board LEDs to manipulate (see board-specific LEDs.h driver file).
- */
- static inline void LEDs_ToggleLEDs(const uint_reg_t LEDMask);
-
- /** Returns the status of all the board LEDs; set LED masks in the return value indicate that the
- * corresponding LED is on.
- *
- * \return Mask of the board LEDs which are currently turned on.
- */
- static inline uint_reg_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Temperature.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Temperature.c deleted file mode 100644 index 94843115f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Temperature.c +++ /dev/null @@ -1,66 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_TEMPERATURE_C
-#include "Temperature.h"
-
-#if defined(TEMPERATURE_SENSOR_DRIVER_COMPATIBLE)
-
-static const uint16_t PROGMEM Temperature_Lookup[TEMP_TABLE_SIZE] =
-{
- 0x3B4, 0x3B0, 0x3AB, 0x3A6, 0x3A0, 0x39A, 0x394, 0x38E, 0x388, 0x381, 0x37A, 0x373,
- 0x36B, 0x363, 0x35B, 0x353, 0x34A, 0x341, 0x338, 0x32F, 0x325, 0x31B, 0x311, 0x307,
- 0x2FC, 0x2F1, 0x2E6, 0x2DB, 0x2D0, 0x2C4, 0x2B8, 0x2AC, 0x2A0, 0x294, 0x288, 0x27C,
- 0x26F, 0x263, 0x256, 0x24A, 0x23D, 0x231, 0x225, 0x218, 0x20C, 0x200, 0x1F3, 0x1E7,
- 0x1DB, 0x1CF, 0x1C4, 0x1B8, 0x1AC, 0x1A1, 0x196, 0x18B, 0x180, 0x176, 0x16B, 0x161,
- 0x157, 0x14D, 0x144, 0x13A, 0x131, 0x128, 0x11F, 0x117, 0x10F, 0x106, 0x0FE, 0x0F7,
- 0x0EF, 0x0E8, 0x0E1, 0x0DA, 0x0D3, 0x0CD, 0x0C7, 0x0C0, 0x0BA, 0x0B5, 0x0AF, 0x0AA,
- 0x0A4, 0x09F, 0x09A, 0x096, 0x091, 0x08C, 0x088, 0x084, 0x080, 0x07C, 0x078, 0x074,
- 0x071, 0x06D, 0x06A, 0x067, 0x064, 0x061, 0x05E, 0x05B, 0x058, 0x055, 0x053, 0x050,
- 0x04E, 0x04C, 0x049, 0x047, 0x045, 0x043, 0x041, 0x03F, 0x03D, 0x03C, 0x03A, 0x038
-};
-
-int8_t Temperature_GetTemperature(void)
-{
- uint16_t Temp_ADC = ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | TEMP_ADC_CHANNEL_MASK);
-
- if (Temp_ADC > pgm_read_word(&Temperature_Lookup[0]))
- return TEMP_MIN_TEMP;
-
- for (uint16_t Index = 0; Index < TEMP_TABLE_SIZE; Index++)
- {
- if (Temp_ADC > pgm_read_word(&Temperature_Lookup[Index]))
- return (Index + TEMP_TABLE_OFFSET_DEGREES);
- }
-
- return TEMP_MAX_TEMP;
-}
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Temperature.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Temperature.h deleted file mode 100644 index ed3aa7bd8..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/Temperature.h +++ /dev/null @@ -1,147 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief NTC Temperature Sensor board hardware driver.
- *
- * Master include file for the board temperature sensor driver, for the USB boards which contain a temperature sensor.
- */
-
-/** \ingroup Group_BoardDrivers
- * \defgroup Group_Temperature Temperature Sensor Driver - LUFA/Drivers/Board/Temperature.h
- * \brief NTC Temperature Sensor board hardware driver.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/Board/Temperature.c <i>(Makefile source module name: LUFA_SRC_TEMPERATURE)</i>
- *
- * \section Sec_ModDescription Module Description
- * Temperature sensor driver. This provides an easy to use interface for the hardware temperature sensor located
- * on many boards. It provides an interface to configure the sensor and appropriate ADC channel, plus read out the
- * current temperature in degrees C. It is designed for and will only work with the temperature sensor located on the
- * official Atmel USB AVR boards, as each sensor has different characteristics.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the ADC and board temperature sensor drivers before first use
- * ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
- * Temperature_Init();
- *
- * // Display converted temperature in degrees Celsius
- * printf("Current Temperature: %d Degrees\r\n", Temperature_GetTemperature());
- * \endcode
- *
- * @{
- */
-
-#ifndef __TEMPERATURE_H__
-#define __TEMPERATURE_H__
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Preprocessor Checks: */
- #if ((BOARD == BOARD_USBKEY) || (BOARD == BOARD_STK525) || \
- (BOARD == BOARD_STK526) || (BOARD == BOARD_EVK527))
- #define TEMPERATURE_SENSOR_DRIVER_COMPATIBLE
- #endif
-
- #if !defined(__INCLUDE_FROM_TEMPERATURE_C) && !defined(TEMPERATURE_SENSOR_DRIVER_COMPATIBLE)
- #error The selected board does not contain a compatible temperature sensor.
- #endif
-
- #if defined(TEMPERATURE_SENSOR_DRIVER_COMPATIBLE)
-
- /* Includes: */
- #include "../Peripheral/ADC.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** ADC channel number for the temperature sensor. */
- #define TEMP_ADC_CHANNEL 0
-
- /** ADC channel MUX mask for the temperature sensor. */
- #define TEMP_ADC_CHANNEL_MASK ADC_CHANNEL0
-
- /** Size of the temperature sensor lookup table, in lookup values */
- #define TEMP_TABLE_SIZE 120
-
- /** Minimum returnable temperature from the \ref Temperature_GetTemperature() function. */
- #define TEMP_MIN_TEMP TEMP_TABLE_OFFSET_DEGREES
-
- /** Maximum returnable temperature from the \ref Temperature_GetTemperature() function. */
- #define TEMP_MAX_TEMP ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET_DEGREES)
-
- /* Inline Functions: */
- /** Initializes the temperature sensor driver, including setting up the appropriate ADC channel.
- * This must be called before any other temperature sensor routines.
- *
- * \pre The ADC itself (not the ADC channel) must be configured separately before calling the
- * temperature sensor functions.
- */
- static inline void Temperature_Init(void) ATTR_ALWAYS_INLINE;
- static inline void Temperature_Init(void)
- {
- ADC_SetupChannel(TEMP_ADC_CHANNEL);
- }
-
- /* Function Prototypes: */
- /** Performs a complete ADC on the temperature sensor channel, and converts the result into a
- * valid temperature between \ref TEMP_MIN_TEMP and \ref TEMP_MAX_TEMP in degrees Celsius.
- *
- * \return Signed temperature value in degrees Celsius.
- */
- int8_t Temperature_GetTemperature(void) ATTR_WARN_UNUSED_RESULT;
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define TEMP_TABLE_OFFSET_DEGREES -21
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h deleted file mode 100644 index f0f596e84..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1100/Buttons.h +++ /dev/null @@ -1,117 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Atmel EVK1100.
- * \copydetails Group_Buttons_EVK1100
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_EVK1100 EVK1100
- * \brief Board specific Buttons driver header for the Atmel EVK1100.
- *
- * Board specific Buttons driver header for the Atmel EVK1100.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>SW0 Button</td><td>Low</td><td>GPIO88</td></tr>
- * <tr><td>BUTTONS_BUTTON2</td><td>SW1 Button</td><td>Low</td><td>GPIO85</td></tr>
- * <tr><td>BUTTONS_BUTTON3</td><td>SW2 Button</td><td>Low</td><td>GPIO82</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_EVK1100_H__
-#define __BUTTONS_EVK1100_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define BUTTONS_PORT 2
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask of the first button on the board */
- #define BUTTONS_BUTTON1 (1UL << 24)
-
- /** Mask of the second button on the board */
- #define BUTTONS_BUTTON2 (1UL << 21)
-
- /** Mask of the third button on the board */
- #define BUTTONS_BUTTON3 (1UL << 18)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- AVR32_GPIO.port[BUTTONS_PORT].gpers = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- AVR32_GPIO.port[BUTTONS_PORT].puers = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- }
-
- static inline void Buttons_Disable(void)
- {
- AVR32_GPIO.port[BUTTONS_PORT].gperc = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- AVR32_GPIO.port[BUTTONS_PORT].puerc = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- }
-
- static inline uint32_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint32_t Buttons_GetStatus(void)
- {
- return (~(AVR32_GPIO.port[JOY_MOVE_PORT].pvr & (BUTTONS_BUTTON1 | BUTTONS_BUTTON2)));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h deleted file mode 100644 index adc6aea62..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1100/Joystick.h +++ /dev/null @@ -1,122 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific joystick driver header for the Atmel EVK1100.
- * \copydetails Group_Joystick_EVK1100
- *
- * \note This file should not be included directly. It is automatically included as needed by the joystick driver
- * dispatch header located in LUFA/Drivers/Board/Joystick.h.
- */
-
-/** \ingroup Group_Joystick
- * \defgroup Group_Joystick_EVK1100 EVK1100
- * \brief Board specific joystick driver header for the Atmel EVK1100.
- *
- * Board specific joystick driver header for the Atmel EVK1100.
- *
- * <table>
- * <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
- * <tr><td>GPIO25</td><td>GPIO26</td><td>GPIO28</td><td>GPIO27</td><td>GPIO20</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __JOYSTICK_EVK1100_H__
-#define __JOYSTICK_EVK1100_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_JOYSTICK_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define JOY_PORT 0
- #define JOY_MASK ((1UL << 28) | (1UL << 27) | (1UL << 26) | (1UL << 25) | (1UL << 20))
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask for the joystick being pushed in the left direction. */
- #define JOY_LEFT (1UL << 25)
-
- /** Mask for the joystick being pushed in the upward direction. */
- #define JOY_UP (1UL << 26)
-
- /** Mask for the joystick being pushed in the right direction. */
- #define JOY_RIGHT (1UL << 28)
-
- /** Mask for the joystick being pushed in the downward direction. */
- #define JOY_DOWN (1UL << 27)
-
- /** Mask for the joystick being pushed inward. */
- #define JOY_PRESS (1UL << 20)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Joystick_Init(void)
- {
- AVR32_GPIO.port[JOY_PORT].gpers = JOY_MASK;
- AVR32_GPIO.port[JOY_PORT].gpers = JOY_MASK;
- };
-
- static inline void Joystick_Disable(void)
- {
- AVR32_GPIO.port[JOY_PORT].gperc = JOY_MASK;
- AVR32_GPIO.port[JOY_PORT].gperc = JOY_MASK;
- };
-
- static inline uint32_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint32_t Joystick_GetStatus(void)
- {
- return (uint32_t)(~(AVR32_GPIO.port[JOY_PORT].pvr & JOY_MASK));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h deleted file mode 100644 index 3e5ab8516..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1100/LEDs.h +++ /dev/null @@ -1,173 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel EVK1100.
- * \copydetails Group_LEDs_EVK1100
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_EVK1100 EVK1100
- * \brief Board specific LED driver header for the Atmel EVK1100.
- *
- * Board specific LED driver header for the Atmel EVK1100.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>LED0 LED</td><td>Low</td><td>GPIO51</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>LED1 LED</td><td>Low</td><td>GPIO52</td></tr>
- * <tr><td>LEDS_LED3</td><td>Green</td><td>LED2 LED</td><td>Low</td><td>GPIO53</td></tr>
- * <tr><td>LEDS_LED4</td><td>Green</td><td>LED3 LED</td><td>Low</td><td>GPIO54</td></tr>
- * <tr><td>LEDS_LED5</td><td>Green</td><td>LED4 LED</td><td>Low</td><td>GPIO59</td></tr>
- * <tr><td>LEDS_LED6</td><td>Green</td><td>LED5 LED</td><td>Low</td><td>GPIO60</td></tr>
- * <tr><td>LEDS_LED7</td><td>Green</td><td>LED6 LED</td><td>Low</td><td>GPIO61</td></tr>
- * <tr><td>LEDS_LED8</td><td>Green</td><td>LED7 LED</td><td>Low</td><td>GPIO62</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_EVK1100_H__
-#define __LEDS_EVK1100_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define LEDS_PORT 1
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1UL << 19)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1UL << 20)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1UL << 21)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 (1UL << 22)
-
- /** LED mask for the fifth LED on the board. */
- #define LEDS_LED5 (1UL << 27)
-
- /** LED mask for the sixth LED on the board. */
- #define LEDS_LED6 (1UL << 28)
-
- /** LED mask for the seventh LED on the board. */
- #define LEDS_LED7 (1UL << 29)
-
- /** LED mask for the eighth LED on the board. */
- #define LEDS_LED8 (1UL << 30)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4 \
- LEDS_LED5 | LEDS_LED6 | LEDS_LED7 | LEDS_LED8)
-
- /** LED mask for the none of the board LEDs */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- AVR32_GPIO.port[LEDS_PORT].gpers = LEDS_ALL_LEDS;
- AVR32_GPIO.port[LEDS_PORT].oders = LEDS_ALL_LEDS;
- AVR32_GPIO.port[LEDS_PORT].ovrs = LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- AVR32_GPIO.port[LEDS_PORT].gperc = LEDS_ALL_LEDS;
- AVR32_GPIO.port[LEDS_PORT].oderc = LEDS_ALL_LEDS;
- AVR32_GPIO.port[LEDS_PORT].ovrc = LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[LEDS_PORT].ovrc = LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[LEDS_PORT].ovrs = LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[LEDS_PORT].ovrs = LEDS_ALL_LEDS;
- AVR32_GPIO.port[LEDS_PORT].ovrc = LEDMask;
- }
-
- static inline void LEDs_ChangeLEDs(const uint32_t LEDMask, const uint32_t ActiveMask)
- {
- AVR32_GPIO.port[LEDS_PORT].ovrs = LEDMask;
- AVR32_GPIO.port[LEDS_PORT].ovrc = ActiveMask;
- }
-
- static inline void LEDs_ToggleLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[LEDS_PORT].ovrt = LEDMask;
- }
-
- static inline uint32_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint32_t LEDs_GetLEDs(void)
- {
- return (~AVR32_GPIO.port[LEDS_PORT].ovr & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h deleted file mode 100644 index 40f8aecf3..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1101/Buttons.h +++ /dev/null @@ -1,113 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Atmel EVK1101.
- * \copydetails Group_Buttons_EVK1101
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_EVK1101 EVK1101
- * \brief Board specific Buttons driver header for the Atmel EVK1101.
- *
- * Board specific Buttons driver header for the Atmel EVK1101.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>SW0 Button</td><td>Low</td><td>GPIO34</td></tr>
- * <tr><td>BUTTONS_BUTTON2</td><td>SW1 Button</td><td>Low</td><td>GPIO35</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_EVK1101_H__
-#define __BUTTONS_EVK1101_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define BUTTONS_PORT 1
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask of the first button on the board */
- #define BUTTONS_BUTTON1 (1UL << 2)
-
- /** Mask of the second button on the board */
- #define BUTTONS_BUTTON2 (1UL << 3)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- AVR32_GPIO.port[BUTTONS_PORT].gpers = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- AVR32_GPIO.port[BUTTONS_PORT].puers = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- }
-
- static inline void Buttons_Disable(void)
- {
- AVR32_GPIO.port[BUTTONS_PORT].gperc = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- AVR32_GPIO.port[BUTTONS_PORT].puerc = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- }
-
- static inline uint32_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint32_t Buttons_GetStatus(void)
- {
- return (~(AVR32_GPIO.port[BUTTONS_PORT].pvr & (BUTTONS_BUTTON1 | BUTTONS_BUTTON2)));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h deleted file mode 100644 index d61c52e33..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1101/Joystick.h +++ /dev/null @@ -1,131 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific joystick driver header for the Atmel EVK1101.
- * \copydetails Group_Joystick_EVK1101
- *
- * \note This file should not be included directly. It is automatically included as needed by the joystick driver
- * dispatch header located in LUFA/Drivers/Board/Joystick.h.
- */
-
-/** \ingroup Group_Joystick
- * \defgroup Group_Joystick_EVK1101 EVK1101
- * \brief Board specific joystick driver header for the Atmel EVK1101.
- *
- * Board specific joystick driver header for the Atmel EVK1101.
- *
- * <table>
- * <tr><th>Left Port Pin</th><th>Up Port Pin</th><th>Right Port Pin</th><th>Down Port Pin</th><th>Press Port Pin</th></tr>
- * <tr><td>GPIO38</td><td>GPIO39</td><td>GPIO41</td><td>GPIO40</td><td>GPIO13</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __JOYSTICK_EVK1101_H__
-#define __JOYSTICK_EVK1101_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_JOYSTICK_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define JOY_MOVE_PORT 1
- #define JOY_MOVE_MASK ((1UL << 6) | (1UL << 7) | (1UL << 8) | (1UL << 9))
- #define JOY_PRESS_PORT 0
- #define JOY_PRESS_MASK (1UL << 13)
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask for the joystick being pushed in the left direction. */
- #define JOY_LEFT (1UL << 6)
-
- /** Mask for the joystick being pushed in the upward direction. */
- #define JOY_UP (1UL << 7)
-
- /** Mask for the joystick being pushed in the right direction. */
- #define JOY_RIGHT (1UL << 9)
-
- /** Mask for the joystick being pushed in the downward direction. */
- #define JOY_DOWN (1UL << 8)
-
- /** Mask for the joystick being pushed inward. */
- #define JOY_PRESS (1UL << 13)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Joystick_Init(void)
- {
- AVR32_GPIO.port[JOY_MOVE_PORT].gpers = JOY_MOVE_MASK;
- AVR32_GPIO.port[JOY_PRESS_PORT].gpers = JOY_PRESS_MASK;
-
- AVR32_GPIO.port[JOY_MOVE_PORT].puers = JOY_MOVE_MASK;
- AVR32_GPIO.port[JOY_PRESS_PORT].puers = JOY_PRESS_MASK;
- };
-
- static inline void Joystick_Disable(void)
- {
- AVR32_GPIO.port[JOY_MOVE_PORT].gperc = JOY_MOVE_MASK;
- AVR32_GPIO.port[JOY_PRESS_PORT].gperc = JOY_PRESS_MASK;
-
- AVR32_GPIO.port[JOY_MOVE_PORT].puerc = JOY_MOVE_MASK;
- AVR32_GPIO.port[JOY_PRESS_PORT].puerc = JOY_PRESS_MASK;
- };
-
- static inline uint32_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint32_t Joystick_GetStatus(void)
- {
- return (uint32_t)(~((AVR32_GPIO.port[JOY_MOVE_PORT].pvr & JOY_MOVE_MASK) |
- (AVR32_GPIO.port[JOY_PRESS_PORT].pvr & JOY_PRESS_MASK)));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h deleted file mode 100644 index 1f1960d1f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1101/LEDs.h +++ /dev/null @@ -1,156 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel EVK1101.
- * \copydetails Group_LEDs_EVK1101
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_EVK1101 EVK1101
- * \brief Board specific LED driver header for the Atmel EVK1101.
- *
- * Board specific LED driver header for the Atmel EVK1101.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>LED0 LED</td><td>Low</td><td>GPIO7</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>LED1 LED</td><td>Low</td><td>GPIO8</td></tr>
- * <tr><td>LEDS_LED3</td><td>Green</td><td>LED2 LED</td><td>Low</td><td>GPIO21</td></tr>
- * <tr><td>LEDS_LED4</td><td>Green</td><td>LED3 LED</td><td>Low</td><td>GPIO22</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_EVK1101_H__
-#define __LEDS_EVK1101_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define LEDS_PORT 0
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1UL << 7)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1UL << 8)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1UL << 21)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 (1UL << 22)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for the none of the board LEDs */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- AVR32_GPIO.port[LEDS_PORT].gpers = LEDS_ALL_LEDS;
- AVR32_GPIO.port[LEDS_PORT].oders = LEDS_ALL_LEDS;
- AVR32_GPIO.port[LEDS_PORT].ovrs = LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_Disable(void)
- {
- AVR32_GPIO.port[LEDS_PORT].gperc = LEDS_ALL_LEDS;
- AVR32_GPIO.port[LEDS_PORT].oderc = LEDS_ALL_LEDS;
- AVR32_GPIO.port[LEDS_PORT].ovrc = LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[LEDS_PORT].ovrc = LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[LEDS_PORT].ovrs = LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[LEDS_PORT].ovrs = LEDS_ALL_LEDS;
- AVR32_GPIO.port[LEDS_PORT].ovrc = LEDMask;
- }
-
- static inline void LEDs_ChangeLEDs(const uint32_t LEDMask, const uint32_t ActiveMask)
- {
- AVR32_GPIO.port[LEDS_PORT].ovrs = LEDMask;
- AVR32_GPIO.port[LEDS_PORT].ovrc = ActiveMask;
- }
-
- static inline void LEDs_ToggleLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[LEDS_PORT].ovrt = LEDMask;
- }
-
- static inline uint32_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint32_t LEDs_GetLEDs(void)
- {
- return (~AVR32_GPIO.port[LEDS_PORT].ovr & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h deleted file mode 100644 index 1c6bdd0d4..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1104/Buttons.h +++ /dev/null @@ -1,109 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Atmel EVK1104.
- * \copydetails Group_Buttons_EVK1104
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_EVK1104 EVK1104
- * \brief Board specific Buttons driver header for the Atmel EVK1104.
- *
- * Board specific Buttons driver header for the Atmel EVK1104.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>SW0 Button</td><td>Low</td><td>GPIO42</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_EVK1104_H__
-#define __BUTTONS_EVK1104_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define BUTTONS_PORT 1
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask of the first button on the board */
- #define BUTTONS_BUTTON1 (1UL << 10)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- AVR32_GPIO.port[BUTTONS_PORT].gpers = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- AVR32_GPIO.port[BUTTONS_PORT].puers = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- }
-
- static inline void Buttons_Disable(void)
- {
- AVR32_GPIO.port[BUTTONS_PORT].gperc = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- AVR32_GPIO.port[BUTTONS_PORT].puerc = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2);
- }
-
- static inline uint32_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint32_t Buttons_GetStatus(void)
- {
- return (~(AVR32_GPIO.port[JOY_MOVE_PORT].pvr & (BUTTONS_BUTTON1 | BUTTONS_BUTTON2)));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h deleted file mode 100644 index 145955174..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/UC3/EVK1104/LEDs.h +++ /dev/null @@ -1,174 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel EVK1104.
- * \copydetails Group_LEDs_EVK1104
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_EVK1104 EVK1104
- * \brief Board specific LED driver header for the Atmel EVK1104.
- *
- * Board specific LED driver header for the Atmel EVK1104.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Green</td><td>LED0 LED</td><td>Low</td><td>GPIO67</td></tr>
- * <tr><td>LEDS_LED2</td><td>Green</td><td>LED1 LED</td><td>Low</td><td>GPIO101</td></tr>
- * <tr><td>LEDS_LED3</td><td>Green</td><td>LED2 LED</td><td>Low</td><td>GPIO102</td></tr>
- * <tr><td>LEDS_LED4</td><td>Green</td><td>LED3 LED</td><td>Low</td><td>GPIO105</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_EVK1104_H__
-#define __LEDS_EVK1104_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define LEDS_LEDMASK2 (1UL << 3)
- #define LEDS_LEDMASK3 ((1UL << 9) | (1UL << 6) | (1UL << 5))
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1UL << 3)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1UL << 5)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1UL << 9)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 (1UL << 6)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
-
- /** LED mask for the none of the board LEDs */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- AVR32_GPIO.port[2].gpers = LEDS_LEDMASK2;
- AVR32_GPIO.port[2].oders = LEDS_LEDMASK2;
- AVR32_GPIO.port[2].ovrs = LEDS_LEDMASK2;
-
- AVR32_GPIO.port[3].gpers = LEDS_LEDMASK3;
- AVR32_GPIO.port[3].oders = LEDS_LEDMASK3;
- AVR32_GPIO.port[3].ovrs = LEDS_LEDMASK3;
- }
-
- static inline void LEDs_Disable(void)
- {
- AVR32_GPIO.port[2].gperc = LEDS_LEDMASK2;
- AVR32_GPIO.port[2].oderc = LEDS_LEDMASK2;
- AVR32_GPIO.port[2].ovrc = LEDS_LEDMASK2;
-
- AVR32_GPIO.port[3].gperc = LEDS_LEDMASK3;
- AVR32_GPIO.port[3].oderc = LEDS_LEDMASK3;
- AVR32_GPIO.port[3].ovrc = LEDS_LEDMASK3;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[2].ovrc = (LEDMask & LEDS_LEDMASK2);
- AVR32_GPIO.port[3].ovrc = (LEDMask & LEDS_LEDMASK3);
- }
-
- static inline void LEDs_TurnOffLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[2].ovrs = (LEDMask & LEDS_LEDMASK2);
- AVR32_GPIO.port[3].ovrs = (LEDMask & LEDS_LEDMASK3);
- }
-
- static inline void LEDs_SetAllLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[2].ovrs = LEDS_LEDMASK2;
- AVR32_GPIO.port[2].ovrc = (LEDMask & LEDS_LEDMASK2);
-
- AVR32_GPIO.port[3].ovrs = LEDS_LEDMASK3;
- AVR32_GPIO.port[3].ovrc = (LEDMask & LEDS_LEDMASK3);
- }
-
- static inline void LEDs_ChangeLEDs(const uint32_t LEDMask, const uint32_t ActiveMask)
- {
- AVR32_GPIO.port[2].ovrs = (LEDMask & LEDS_LEDMASK2);
- AVR32_GPIO.port[2].ovrc = (ActiveMask & LEDS_LEDMASK2);
-
- AVR32_GPIO.port[3].ovrs = (LEDMask & LEDS_LEDMASK3);
- AVR32_GPIO.port[3].ovrc = (ActiveMask & LEDS_LEDMASK3);
- }
-
- static inline void LEDs_ToggleLEDs(const uint32_t LEDMask)
- {
- AVR32_GPIO.port[2].ovrt = (LEDMask & LEDS_LEDMASK2);
- AVR32_GPIO.port[3].ovrt = (LEDMask & LEDS_LEDMASK3);
- }
-
- static inline uint32_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint32_t LEDs_GetLEDs(void)
- {
- return ((~AVR32_GPIO.port[2].ovr & LEDS_LEDMASK2) | (~AVR32_GPIO.port[3].ovr & LEDS_LEDMASK3));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h deleted file mode 100644 index ebe24a74f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Buttons.h +++ /dev/null @@ -1,119 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Atmel XMEGA A3BU Xplained.
- * \copydetails Group_Buttons_A3BU_XPLAINED
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_A3BU_XPLAINED A3BU_XPLAINED
- * \brief Board specific Buttons driver header for the Atmel XMEGA A3BU Xplained.
- *
- * Board specific Buttons driver header for the Atmel XMEGA A3BU Xplained.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>SW0 Button</td><td>Low</td><td>PORTE.5</td></tr>
- * <tr><td>BUTTONS_BUTTON2</td><td>SW1 Button</td><td>Low</td><td>PORTF.1</td></tr>
- * <tr><td>BUTTONS_BUTTON3</td><td>SW2 Button</td><td>Low</td><td>PORTF.2</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_A3BU_XPLAINED_H__
-#define __BUTTONS_A3BU_XPLAINED_H__
-
- /* Includes: */
- #include <avr/io.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 5)
-
- /** Button mask for the second button on the board. */
- #define BUTTONS_BUTTON2 (1 << 1)
-
- /** Button mask for the third button on the board. */
- #define BUTTONS_BUTTON3 (1 << 2)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- PORTE.OUTCLR = BUTTONS_BUTTON1;
- PORTE.PIN5CTRL = (PORT_OPC_PULLUP_gc | PORT_INVEN_bm);
-
- PORTF.OUTCLR = (BUTTONS_BUTTON2 | BUTTONS_BUTTON3);
- PORTF.PIN1CTRL = (PORT_OPC_PULLUP_gc | PORT_INVEN_bm);
- PORTF.PIN2CTRL = (PORT_OPC_PULLUP_gc | PORT_INVEN_bm);
- }
-
- static inline void Buttons_Disable(void)
- {
- PORTE.OUTCLR = BUTTONS_BUTTON1;
- PORTE.PIN5CTRL = 0;
-
- PORTF.OUTCLR = (BUTTONS_BUTTON2 | BUTTONS_BUTTON3);
- PORTF.PIN1CTRL = 0;
- PORTF.PIN2CTRL = 0;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return ((PORTE_IN & BUTTONS_BUTTON1) | (PORTF_IN & (BUTTONS_BUTTON2 | BUTTONS_BUTTON3)));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h deleted file mode 100644 index 34f8ce121..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/Dataflash.h +++ /dev/null @@ -1,222 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Dataflash driver header for the Atmel XMEGA B1 Xplained.
- * \copydetails Group_Dataflash_B1_XPLAINED
- *
- * \note This file should not be included directly. It is automatically included as needed by the dataflash driver
- * dispatch header located in LUFA/Drivers/Board/Dataflash.h.
- */
-
-/** \ingroup Group_Dataflash
- * \defgroup Group_Dataflash_B1_XPLAINED B1_XPLAINED
- * \brief Board specific Dataflash driver header for the Atmel XMEGA B1 Xplained.
- *
- * Board specific Dataflash driver header for the Atmel XMEGA B1 Xplained board.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
- * <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTF.4</td><td>USARTD0 (In SPI Mode)</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __DATAFLASH_B1_XPLAINED_H__
-#define __DATAFLASH_B1_XPLAINED_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../../../Misc/AT45DB642D.h"
- #include "../../../Peripheral/SerialSPI.h"
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_DATAFLASH_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define DATAFLASH_CHIPCS_MASK (1 << 4)
- #define DATAFLASH_CHIPCS_PORT PORTF
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Constant indicating the total number of dataflash ICs mounted on the selected board. */
- #define DATAFLASH_TOTALCHIPS 1
-
- /** Mask for no dataflash chip selected. */
- #define DATAFLASH_NO_CHIP 0
-
- /** Mask for the first dataflash chip selected. */
- #define DATAFLASH_CHIP1 (1 << 4)
-
- /** Internal main memory page size for the board's dataflash ICs. */
- #define DATAFLASH_PAGE_SIZE 1024
-
- /** Total number of pages inside each of the board's dataflash ICs. */
- #define DATAFLASH_PAGES 8192
-
- /* Inline Functions: */
- /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
- * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
- */
- static inline void Dataflash_Init(void)
- {
- DATAFLASH_CHIPCS_PORT.DIRSET = DATAFLASH_CHIPCS_MASK;
-
- PORTCFG.MPCMASK = DATAFLASH_CHIPCS_MASK;
- DATAFLASH_CHIPCS_PORT.PIN0CTRL = PORT_INVEN_bm;
- }
-
- /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
- {
- return SerialSPI_TransferByte(&USARTD0, Byte);
- }
-
- /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- */
- static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SendByte(const uint8_t Byte)
- {
- SerialSPI_SendByte(&USARTD0, Byte);
- }
-
- /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_ReceiveByte(void)
- {
- return SerialSPI_ReceiveByte(&USARTD0);
- }
-
- /** Determines the currently selected dataflash chip.
- *
- * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
- * or a DATAFLASH_CHIPn mask (where n is the chip number).
- */
- static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_GetSelectedChip(void)
- {
- return (DATAFLASH_CHIPCS_PORT.OUT & DATAFLASH_CHIPCS_MASK);
- }
-
- /** Selects the given dataflash chip.
- *
- * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of DATAFLASH_CHIPn mask (where n is
- * the chip number).
- */
- static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SelectChip(const uint8_t ChipMask)
- {
- DATAFLASH_CHIPCS_PORT.OUTCLR = DATAFLASH_CHIPCS_MASK;
- DATAFLASH_CHIPCS_PORT.OUTSET = ChipMask;
- }
-
- /** Deselects the current dataflash chip, so that no dataflash is selected. */
- static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_DeselectChip(void)
- {
- Dataflash_SelectChip(DATAFLASH_NO_CHIP);
- }
-
- /** Selects a dataflash IC from the given page number, which should range from 0 to
- * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
- * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside
- * the total number of pages contained in the boards dataflash ICs, all dataflash ICs
- * are deselected.
- *
- * \param[in] PageAddress Address of the page to manipulate, ranging from
- * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
- */
- static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
- {
- Dataflash_DeselectChip();
-
- if (PageAddress >= (DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS))
- return;
-
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- }
-
- /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive
- * a new command.
- */
- static inline void Dataflash_ToggleSelectedChipCS(void)
- {
- uint8_t SelectedChipMask = Dataflash_GetSelectedChip();
-
- Dataflash_DeselectChip();
- Dataflash_SelectChip(SelectedChipMask);
- }
-
- /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main
- * memory page program or main memory to buffer transfer.
- */
- static inline void Dataflash_WaitWhileBusy(void)
- {
- Dataflash_ToggleSelectedChipCS();
- Dataflash_SendByte(DF_CMD_GETSTATUS);
- while (!(Dataflash_ReceiveByte() & DF_STATUS_READY));
- Dataflash_ToggleSelectedChipCS();
- }
-
- /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
- * dataflash commands which require a complete 24-bit address.
- *
- * \param[in] PageAddress Page address within the selected dataflash IC
- * \param[in] BufferByte Address within the dataflash's buffer
- */
- static inline void Dataflash_SendAddressBytes(uint16_t PageAddress,
- const uint16_t BufferByte)
- {
- Dataflash_SendByte(PageAddress >> 5);
- Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8));
- Dataflash_SendByte(BufferByte);
- }
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h deleted file mode 100644 index f930844c8..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/A3BU_XPLAINED/LEDs.h +++ /dev/null @@ -1,144 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel XMEGA A3BU Xplained.
- * \copydetails Group_LEDs_A3BU_XPLAINED
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_A3BU_XPLAINED A3BU_XPLAINED
- * \brief Board specific LED driver header for the Atmel XMEGA A3BU Xplained.
- *
- * Board specific LED driver header for the Atmel XMEGA A3BU Xplained.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Yellow</td><td>LED0 LED</td><td>Low</td><td>PORTR.0</td></tr>
- * <tr><td>LEDS_LED2</td><td>Yellow</td><td>LED1 LED</td><td>Low</td><td>PORTR.1</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_A3BU_XPLAINED_H__
-#define __LEDS_A3BU_XPLAINED_H__
-
- /* Includes: */
- #include <avr/io.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 0)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 1)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- PORTR.DIRSET = LEDS_ALL_LEDS;
- PORTR.OUTCLR = LEDS_ALL_LEDS;
-
- PORTCFG.MPCMASK = LEDS_ALL_LEDS;
- PORTR.PIN0CTRL = PORT_INVEN_bm;
- }
-
- static inline void LEDs_Disable(void)
- {
- PORTR.DIRCLR = LEDS_ALL_LEDS;
- PORTR.OUTCLR = LEDS_ALL_LEDS;
-
- PORTCFG.MPCMASK = 0;
- PORTR.PIN0CTRL = LEDS_ALL_LEDS;
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTR_OUTSET = LEDMask;
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTR_OUTCLR = LEDMask;
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTR_OUT = (PORTR.OUT & ~LEDS_ALL_LEDS) | LEDMask;
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask)
- {
- PORTR_OUT = (PORTR.OUT & ~LEDMask) | ActiveMask;
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PORTR_OUTTGL = LEDMask;
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return (PORTR_OUT & LEDS_ALL_LEDS);
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h deleted file mode 100644 index ae5445a1f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Buttons.h +++ /dev/null @@ -1,119 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Buttons driver header for the Atmel XMEGA B1 Xplained.
- * \copydetails Group_Buttons_B1_XPLAINED
- *
- * \note This file should not be included directly. It is automatically included as needed by the Buttons driver
- * dispatch header located in LUFA/Drivers/Board/Buttons.h.
- */
-
-/** \ingroup Group_Buttons
- * \defgroup Group_Buttons_B1_XPLAINED B1_XPLAINED
- * \brief Board specific Buttons driver header for the Atmel XMEGA B1 Xplained.
- *
- * Board specific Buttons driver header for the Atmel XMEGA B1 Xplained.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>BUTTONS_BUTTON1</td><td>Touch CS0 Button</td><td>Low</td><td>PORTE.0</td></tr>
- * <tr><td>BUTTONS_BUTTON2</td><td>Touch CS1 Button</td><td>Low</td><td>PORTE.1</td></tr>
- * <tr><td>BUTTONS_BUTTON3</td><td>Touch CS2 Button</td><td>Low</td><td>PORTE.2</td></tr>
- * <tr><td>BUTTONS_BUTTON4</td><td>Touch CS3 Button</td><td>Low</td><td>PORTE.3</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __BUTTONS_B1_XPLAINED_H__
-#define __BUTTONS_B1_XPLAINED_H__
-
- /* Includes: */
- #include <avr/io.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_BUTTONS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Button mask for the first button on the board. */
- #define BUTTONS_BUTTON1 (1 << 0)
-
- /** Button mask for the second button on the board. */
- #define BUTTONS_BUTTON2 (1 << 1)
-
- /** Button mask for the third button on the board. */
- #define BUTTONS_BUTTON3 (1 << 2)
-
- /** Button mask for the fourth button on the board. */
- #define BUTTONS_BUTTON4 (1 << 3)
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void Buttons_Init(void)
- {
- PORTE.OUTSET = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2 | BUTTONS_BUTTON3 | BUTTONS_BUTTON4);
-
- PORTCFG.MPCMASK = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2 | BUTTONS_BUTTON3 | BUTTONS_BUTTON4);
- PORTE.PIN0CTRL = (PORT_INVEN_bm | PORT_OPC_PULLUP_gc);
- }
-
- static inline void Buttons_Disable(void)
- {
- PORTE.OUTCLR = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2 | BUTTONS_BUTTON3 | BUTTONS_BUTTON4);
-
- PORTCFG.MPCMASK = (BUTTONS_BUTTON1 | BUTTONS_BUTTON2 | BUTTONS_BUTTON3 | BUTTONS_BUTTON4);
- PORTE.PIN0CTRL = 0;
- }
-
- static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Buttons_GetStatus(void)
- {
- return (PORTE_IN & (BUTTONS_BUTTON1 | BUTTONS_BUTTON2 | BUTTONS_BUTTON3 | BUTTONS_BUTTON4));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h deleted file mode 100644 index 2f58c4840..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/Dataflash.h +++ /dev/null @@ -1,224 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific Dataflash driver header for the Atmel XMEGA A3BU Xplained.
- * \copydetails Group_Dataflash_A3BU_XPLAINED
- *
- * \note This file should not be included directly. It is automatically included as needed by the dataflash driver
- * dispatch header located in LUFA/Drivers/Board/Dataflash.h.
- */
-
-/** \ingroup Group_Dataflash
- * \defgroup Group_Dataflash_A3BU_XPLAINED A3BU_XPLAINED
- * \brief Board specific Dataflash driver header for the Atmel XMEGA A3BU Xplained.
- *
- * Board specific Dataflash driver header for the Atmel XMEGA A3BU Xplained board.
- *
- * <table>
- * <tr><th>Name</th><th>Info</th><th>Select Pin</th><th>SPI Port</th></tr>
- * <tr><td>DATAFLASH_CHIP1</td><td>AT45DB642D (8MB)</td><td>PORTD.2</td><td>USARTC0 (In SPI Mode, Remapped)</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __DATAFLASH_A3BU_XPLAINED_H__
-#define __DATAFLASH_A3BU_XPLAINED_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../../../Misc/AT45DB642D.h"
- #include "../../../Peripheral/SerialSPI.h"
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_DATAFLASH_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define DATAFLASH_CHIPCS_MASK (1 << 2)
- #define DATAFLASH_CHIPCS_PORT PORTD
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Constant indicating the total number of dataflash ICs mounted on the selected board. */
- #define DATAFLASH_TOTALCHIPS 1
-
- /** Mask for no dataflash chip selected. */
- #define DATAFLASH_NO_CHIP 0
-
- /** Mask for the first dataflash chip selected. */
- #define DATAFLASH_CHIP1 (1 << 2)
-
- /** Internal main memory page size for the board's dataflash ICs. */
- #define DATAFLASH_PAGE_SIZE 1024
-
- /** Total number of pages inside each of the board's dataflash ICs. */
- #define DATAFLASH_PAGES 8192
-
- /* Inline Functions: */
- /** Initializes the dataflash driver so that commands and data may be sent to an attached dataflash IC.
- * The microcontroller's SPI driver MUST be initialized before any of the dataflash commands are used.
- */
- static inline void Dataflash_Init(void)
- {
- DATAFLASH_CHIPCS_PORT.DIRSET = DATAFLASH_CHIPCS_MASK;
-
- PORTCFG.MPCMASK = DATAFLASH_CHIPCS_MASK;
- DATAFLASH_CHIPCS_PORT.PIN0CTRL = PORT_INVEN_bm;
-
- PORTC.REMAP |= PORT_USART0_bm;
- }
-
- /** Sends a byte to the currently selected dataflash IC, and returns a byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline uint8_t Dataflash_TransferByte(const uint8_t Byte)
- {
- return SerialSPI_TransferByte(&USARTC0, Byte);
- }
-
- /** Sends a byte to the currently selected dataflash IC, and ignores the next byte from the dataflash.
- *
- * \param[in] Byte Byte of data to send to the dataflash
- */
- static inline void Dataflash_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SendByte(const uint8_t Byte)
- {
- SerialSPI_SendByte(&USARTC0, Byte);
- }
-
- /** Sends a dummy byte to the currently selected dataflash IC, and returns the next byte from the dataflash.
- *
- * \return Last response byte from the dataflash
- */
- static inline uint8_t Dataflash_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_ReceiveByte(void)
- {
- return SerialSPI_ReceiveByte(&USARTC0);
- }
-
- /** Determines the currently selected dataflash chip.
- *
- * \return Mask of the currently selected Dataflash chip, either \ref DATAFLASH_NO_CHIP if no chip is selected
- * or a DATAFLASH_CHIPn mask (where n is the chip number).
- */
- static inline uint8_t Dataflash_GetSelectedChip(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Dataflash_GetSelectedChip(void)
- {
- return (DATAFLASH_CHIPCS_PORT.OUT & DATAFLASH_CHIPCS_MASK);
- }
-
- /** Selects the given dataflash chip.
- *
- * \param[in] ChipMask Mask of the Dataflash IC to select, in the form of DATAFLASH_CHIPn mask (where n is
- * the chip number).
- */
- static inline void Dataflash_SelectChip(const uint8_t ChipMask) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_SelectChip(const uint8_t ChipMask)
- {
- DATAFLASH_CHIPCS_PORT.OUTCLR = DATAFLASH_CHIPCS_MASK;
- DATAFLASH_CHIPCS_PORT.OUTSET = (ChipMask & DATAFLASH_CHIPCS_MASK);
- }
-
- /** Deselects the current dataflash chip, so that no dataflash is selected. */
- static inline void Dataflash_DeselectChip(void) ATTR_ALWAYS_INLINE;
- static inline void Dataflash_DeselectChip(void)
- {
- Dataflash_SelectChip(DATAFLASH_NO_CHIP);
- }
-
- /** Selects a dataflash IC from the given page number, which should range from 0 to
- * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
- * dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside
- * the total number of pages contained in the boards dataflash ICs, all dataflash ICs
- * are deselected.
- *
- * \param[in] PageAddress Address of the page to manipulate, ranging from
- * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
- */
- static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
- {
- Dataflash_DeselectChip();
-
- if (PageAddress >= (DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS))
- return;
-
- Dataflash_SelectChip(DATAFLASH_CHIP1);
- }
-
- /** Toggles the select line of the currently selected dataflash IC, so that it is ready to receive
- * a new command.
- */
- static inline void Dataflash_ToggleSelectedChipCS(void)
- {
- uint8_t SelectedChipMask = Dataflash_GetSelectedChip();
-
- Dataflash_DeselectChip();
- Dataflash_SelectChip(SelectedChipMask);
- }
-
- /** Spin-loops while the currently selected dataflash is busy executing a command, such as a main
- * memory page program or main memory to buffer transfer.
- */
- static inline void Dataflash_WaitWhileBusy(void)
- {
- Dataflash_ToggleSelectedChipCS();
- Dataflash_SendByte(DF_CMD_GETSTATUS);
- while (!(Dataflash_ReceiveByte() & DF_STATUS_READY));
- Dataflash_ToggleSelectedChipCS();
- }
-
- /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
- * dataflash commands which require a complete 24-bit address.
- *
- * \param[in] PageAddress Page address within the selected dataflash IC
- * \param[in] BufferByte Address within the dataflash's buffer
- */
- static inline void Dataflash_SendAddressBytes(uint16_t PageAddress,
- const uint16_t BufferByte)
- {
- Dataflash_SendByte(PageAddress >> 5);
- Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8));
- Dataflash_SendByte(BufferByte);
- }
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h deleted file mode 100644 index b4b743214..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Board/XMEGA/B1_XPLAINED/LEDs.h +++ /dev/null @@ -1,182 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Board specific LED driver header for the Atmel XMEGA B1 Xplained.
- * \copydetails Group_LEDs_B1_XPLAINED
- *
- * \note This file should not be included directly. It is automatically included as needed by the LEDs driver
- * dispatch header located in LUFA/Drivers/Board/LEDs.h.
- */
-
-/** \ingroup Group_LEDs
- * \defgroup Group_LEDs_B1_XPLAINED B1_XPLAINED
- * \brief Board specific LED driver header for the Atmel XMEGA B1 Xplained.
- *
- * Board specific LED driver header for the Atmel XMEGA B1 Xplained.
- *
- * <table>
- * <tr><th>Name</th><th>Color</th><th>Info</th><th>Active Level</th><th>Port Pin</th></tr>
- * <tr><td>LEDS_LED1</td><td>Yellow</td><td>LED0 LED</td><td>High</td><td>PORTB.4</td></tr>
- * <tr><td>LEDS_LED2</td><td>Yellow</td><td>LED1 LED</td><td>High</td><td>PORTB.5</td></tr>
- * <tr><td>LEDS_LED3</td><td>Yellow</td><td>LED2 LED</td><td>High</td><td>PORTB.6</td></tr>
- * <tr><td>LEDS_LED4</td><td>Yellow</td><td>LED3 LED</td><td>High</td><td>PORTB.7</td></tr>
- * <tr><td>LEDS_LED5</td><td>Green</td><td>USB LED</td><td>Low</td><td>PORTE.4</td></tr>
- * </table>
- *
- * @{
- */
-
-#ifndef __LEDS_B1_XPLAINED_H__
-#define __LEDS_B1_XPLAINED_H__
-
- /* Includes: */
- #include <avr/io.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_LEDS_H)
- #error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define LEDS_PORTB_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
- #define LEDS_PORTE_LEDS LEDS_LED5
-
- #define LEDS_PORTE_MASK_SHIFT 1
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** LED mask for the first LED on the board. */
- #define LEDS_LED1 (1 << 4)
-
- /** LED mask for the second LED on the board. */
- #define LEDS_LED2 (1 << 5)
-
- /** LED mask for the third LED on the board. */
- #define LEDS_LED3 (1 << 6)
-
- /** LED mask for the fourth LED on the board. */
- #define LEDS_LED4 (1 << 7)
-
- /** LED mask for the fifth LED on the board. */
- #define LEDS_LED5 ((1 << 4) >> LEDS_PORTE_MASK_SHIFT)
-
- /** LED mask for all the LEDs on the board. */
- #define LEDS_ALL_LEDS (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4 | LEDS_LED5)
-
- /** LED mask for none of the board LEDs. */
- #define LEDS_NO_LEDS 0
-
- /* Inline Functions: */
- #if !defined(__DOXYGEN__)
- static inline void LEDs_Init(void)
- {
- PORTB.DIRSET = LEDS_PORTB_LEDS;
- PORTB.OUTCLR = LEDS_PORTB_LEDS;
-
- PORTCFG.MPCMASK = LEDS_PORTB_LEDS;
- PORTB.PIN0CTRL = PORT_INVEN_bm;
-
- PORTE.DIRSET = (LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT);
- PORTE.OUTCLR = (LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline void LEDs_Disable(void)
- {
- PORTB.DIRCLR = LEDS_PORTB_LEDS;
- PORTB.OUTCLR = LEDS_PORTB_LEDS;
-
- PORTCFG.MPCMASK = 0;
- PORTB.PIN0CTRL = LEDS_PORTB_LEDS;
-
- PORTE.DIRCLR = (LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT);
- PORTE.OUTCLR = (LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
- {
- PORTB_OUTSET = (LEDMask & LEDS_PORTB_LEDS);
- PORTE_OUTSET = ((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
- {
- PORTB_OUTCLR = (LEDMask & LEDS_PORTB_LEDS);
- PORTE_OUTCLR = ((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
- {
- PORTB_OUTCLR = LEDS_PORTB_LEDS;
- PORTE_OUTCLR = (LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT);
-
- PORTB_OUTSET = (LEDMask & LEDS_PORTB_LEDS);
- PORTE_OUTSET = ((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask)
- {
- PORTB_OUTCLR = (LEDMask & LEDS_PORTB_LEDS);
- PORTE_OUTCLR = ((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT);
-
- PORTB_OUTSET = (ActiveMask & LEDS_PORTB_LEDS);
- PORTE_OUTSET = ((ActiveMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
- {
- PORTB_OUTTGL = (LEDMask & LEDS_PORTB_LEDS);
- PORTE_OUTTGL = ((LEDMask & LEDS_PORTE_LEDS) << LEDS_PORTE_MASK_SHIFT);
- }
-
- static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t LEDs_GetLEDs(void)
- {
- return ((PORTB_OUT & LEDS_PORTB_LEDS) | (PORTE_OUT & (LEDS_PORTE_LEDS << LEDS_PORTE_MASK_SHIFT)));
- }
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/AT45DB321C.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/AT45DB321C.h deleted file mode 100644 index 5c6780f33..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/AT45DB321C.h +++ /dev/null @@ -1,100 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Command constants for the Atmel AT45DB321C Dataflash.
- * \copydetails Group_AT45DB321C
- */
-
-/** \ingroup Group_MiscDrivers
- * \defgroup Group_AT45DB321C Atmel AT45DB321C Dataflash Commands
- * \brief Command constants for the Atmel AT45DB321C Dataflash.
- *
- * Dataflash command constants for the Atmel AT45DB321C Dataflash IC.
- *
- * @{
- */
-
-#ifndef __AT45DB321C_CMDS_H__
-#define __AT45DB321C_CMDS_H__
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name Dataflash Status Values */
- //@{
- #define DF_STATUS_READY (1 << 7)
- #define DF_STATUS_COMPMISMATCH (1 << 6)
- #define DF_STATUS_SECTORPROTECTION_ON (1 << 1)
- //@}
-
- /** \name Dataflash Commands */
- //@{
- #define DF_CMD_GETSTATUS 0xD7
-
- #define DF_CMD_MAINMEMTOBUFF1 0x53
- #define DF_CMD_MAINMEMTOBUFF2 0x55
- #define DF_CMD_MAINMEMTOBUFF1COMP 0x60
- #define DF_CMD_MAINMEMTOBUFF2COMP 0x61
- #define DF_CMD_AUTOREWRITEBUFF1 0x58
- #define DF_CMD_AUTOREWRITEBUFF2 0x59
-
- #define DF_CMD_MAINMEMPAGEREAD 0xD2
- #define DF_CMD_CONTARRAYREAD_LF 0xE8
- #define DF_CMD_BUFF1READ_LF 0xD4
- #define DF_CMD_BUFF2READ_LF 0xD6
-
- #define DF_CMD_BUFF1WRITE 0x84
- #define DF_CMD_BUFF2WRITE 0x87
- #define DF_CMD_BUFF1TOMAINMEMWITHERASE 0x83
- #define DF_CMD_BUFF2TOMAINMEMWITHERASE 0x86
- #define DF_CMD_BUFF1TOMAINMEM 0x88
- #define DF_CMD_BUFF2TOMAINMEM 0x89
- #define DF_CMD_MAINMEMPAGETHROUGHBUFF1 0x82
- #define DF_CMD_MAINMEMPAGETHROUGHBUFF2 0x85
-
- #define DF_CMD_PAGEERASE 0x81
- #define DF_CMD_BLOCKERASE 0x50
-
- #define DF_CMD_SECTORPROTECTIONOFF ((char[]){0x3D, 0x2A, 0x7F, 0xCF})
- #define DF_CMD_SECTORPROTECTIONOFF_BYTE1 0x3D
- #define DF_CMD_SECTORPROTECTIONOFF_BYTE2 0x2A
- #define DF_CMD_SECTORPROTECTIONOFF_BYTE3 0x7F
- #define DF_CMD_SECTORPROTECTIONOFF_BYTE4 0xCF
-
- #define DF_CMD_READMANUFACTURERDEVICEINFO 0x9F
- //@}
-
- /** Manufacturer code for Atmel Corporation, returned by Atmel Dataflash ICs in response to the \c DF_CMD_READMANUFACTURERDEVICEINFO command. */
- #define DF_MANUFACTURER_ATMEL 0x1F
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/AT45DB642D.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/AT45DB642D.h deleted file mode 100644 index cbd15d63f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/AT45DB642D.h +++ /dev/null @@ -1,116 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Command constants for the Atmel AT45DB642D Dataflash.
- * \copydetails Group_AT45DB642D
- */
-
-/** \ingroup Group_MiscDrivers
- * \defgroup Group_AT45DB642D Atmel AT45DB642D Dataflash Commands
- * \brief Command constants for the Atmel AT45DB642D Dataflash.
- *
- * Dataflash command constants for the Atmel AT45DB642D Dataflash IC.
- *
- * @{
- */
-
-#ifndef __AT45DB642D_CMDS_H__
-#define __AT45DB642D_CMDS_H__
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name Dataflash Status Values */
- //@{
- #define DF_STATUS_READY (1 << 7)
- #define DF_STATUS_COMPMISMATCH (1 << 6)
- #define DF_STATUS_SECTORPROTECTION_ON (1 << 1)
- #define DF_STATUS_BINARYPAGESIZE_ON (1 << 0)
- //@}
-
- /** \name Dataflash Commands */
- //@{
- #define DF_CMD_GETSTATUS 0xD7
- #define DF_CMD_POWERDOWN 0xB9
- #define DF_CMD_WAKEUP 0xAB
-
- #define DF_CMD_MAINMEMTOBUFF1 0x53
- #define DF_CMD_MAINMEMTOBUFF2 0x55
- #define DF_CMD_MAINMEMTOBUFF1COMP 0x60
- #define DF_CMD_MAINMEMTOBUFF2COMP 0x61
- #define DF_CMD_AUTOREWRITEBUFF1 0x58
- #define DF_CMD_AUTOREWRITEBUFF2 0x59
-
- #define DF_CMD_MAINMEMPAGEREAD 0xD2
- #define DF_CMD_CONTARRAYREAD_LF 0x03
- #define DF_CMD_BUFF1READ_LF 0xD1
- #define DF_CMD_BUFF2READ_LF 0xD3
-
- #define DF_CMD_BUFF1WRITE 0x84
- #define DF_CMD_BUFF2WRITE 0x87
- #define DF_CMD_BUFF1TOMAINMEMWITHERASE 0x83
- #define DF_CMD_BUFF2TOMAINMEMWITHERASE 0x86
- #define DF_CMD_BUFF1TOMAINMEM 0x88
- #define DF_CMD_BUFF2TOMAINMEM 0x89
- #define DF_CMD_MAINMEMPAGETHROUGHBUFF1 0x82
- #define DF_CMD_MAINMEMPAGETHROUGHBUFF2 0x85
-
- #define DF_CMD_PAGEERASE 0x81
- #define DF_CMD_BLOCKERASE 0x50
- #define DF_CMD_SECTORERASE 0x7C
-
- #define DF_CMD_CHIPERASE ((char[]){0xC7, 0x94, 0x80, 0x9A})
- #define DF_CMD_CHIPERASE_BYTE1 0xC7
- #define DF_CMD_CHIPERASE_BYTE2 0x94
- #define DF_CMD_CHIPERASE_BYTE3 0x80
- #define DF_CMD_CHIPERASE_BYTE4 0x9A
-
- #define DF_CMD_SECTORPROTECTIONOFF ((char[]){0x3D, 0x2A, 0x7F, 0x9A})
- #define DF_CMD_SECTORPROTECTIONOFF_BYTE1 0x3D
- #define DF_CMD_SECTORPROTECTIONOFF_BYTE2 0x2A
- #define DF_CMD_SECTORPROTECTIONOFF_BYTE3 0x7F
- #define DF_CMD_SECTORPROTECTIONOFF_BYTE4 0x9A
-
- #define DF_CMD_BINARYPAGESIZEMODEON ((char[]){0x3D, 0x2A, 0x80, 0xA6})
- #define DF_CMD_BINARYPAGESIZEMODEON_BYTE1 0x3D
- #define DF_CMD_BINARYPAGESIZEMODEON_BYTE2 0x2A
- #define DF_CMD_BINARYPAGESIZEMODEON_BYTE3 0x80
- #define DF_CMD_BINARYPAGESIZEMODEON_BYTE4 0xA6
-
- #define DF_CMD_READMANUFACTURERDEVICEINFO 0x9F
- //@}
-
- /** Manufacturer code for Atmel Corporation, returned by Atmel Dataflash ICs in response to the \c DF_CMD_READMANUFACTURERDEVICEINFO command. */
- #define DF_MANUFACTURER_ATMEL 0x1F
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/RingBuffer.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/RingBuffer.h deleted file mode 100644 index 6d0f60ffa..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/RingBuffer.h +++ /dev/null @@ -1,303 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Lightweight ring (circular) buffer, for fast insertion/deletion of bytes.
- *
- * Lightweight ring buffer, for fast insertion/deletion. Multiple buffers can be created of
- * different sizes to suit different needs.
- *
- * Note that for each buffer, insertion and removal operations may occur at the same time (via
- * a multi-threaded ISR based system) however the same kind of operation (two or more insertions
- * or deletions) must not overlap. If there is possibility of two or more of the same kind of
- * operating occurring at the same point in time, atomic (mutex) locking should be used.
- */
-
-/** \ingroup Group_MiscDrivers
- * \defgroup Group_RingBuff Generic Byte Ring Buffer - LUFA/Drivers/Misc/RingBuffer.h
- * \brief Lightweight ring buffer, for fast insertion/deletion of bytes.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Lightweight ring buffer, for fast insertion/deletion. Multiple buffers can be created of
- * different sizes to suit different needs.
- *
- * Note that for each buffer, insertion and removal operations may occur at the same time (via
- * a multi-threaded ISR based system) however the same kind of operation (two or more insertions
- * or deletions) must not overlap. If there is possibility of two or more of the same kind of
- * operating occurring at the same point in time, atomic (mutex) locking should be used.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Create the buffer structure and its underlying storage array
- * RingBuffer_t Buffer;
- * uint8_t BufferData[128];
- *
- * // Initialize the buffer with the created storage array
- * RingBuffer_InitBuffer(&Buffer, BufferData, sizeof(BufferData));
- *
- * // Insert some data into the buffer
- * RingBuffer_Insert(Buffer, 'H');
- * RingBuffer_Insert(Buffer, 'E');
- * RingBuffer_Insert(Buffer, 'L');
- * RingBuffer_Insert(Buffer, 'L');
- * RingBuffer_Insert(Buffer, 'O');
- *
- * // Cache the number of stored bytes in the buffer
- * uint16_t BufferCount = RingBuffer_GetCount(&Buffer);
- *
- * // Printer stored data length
- * printf("Buffer Length: %d, Buffer Data: \r\n", BufferCount);
- *
- * // Print contents of the buffer one character at a time
- * while (BufferCount--)
- * putc(RingBuffer_Remove(&Buffer));
- * \endcode
- *
- * @{
- */
-
-#ifndef __RING_BUFFER_H__
-#define __RING_BUFFER_H__
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Type Defines: */
- /** \brief Ring Buffer Management Structure.
- *
- * Type define for a new ring buffer object. Buffers should be initialized via a call to
- * \ref RingBuffer_InitBuffer() before use.
- */
- typedef struct
- {
- uint8_t* In; /**< Current storage location in the circular buffer. */
- uint8_t* Out; /**< Current retrieval location in the circular buffer. */
- uint8_t* Start; /**< Pointer to the start of the buffer's underlying storage array. */
- uint8_t* End; /**< Pointer to the end of the buffer's underlying storage array. */
- uint16_t Size; /**< Size of the buffer's underlying storage array. */
- uint16_t Count; /**< Number of bytes currently stored in the buffer. */
- } RingBuffer_t;
-
- /* Inline Functions: */
- /** Initializes a ring buffer ready for use. Buffers must be initialized via this function
- * before any operations are called upon them. Already initialized buffers may be reset
- * by re-initializing them using this function.
- *
- * \param[out] Buffer Pointer to a ring buffer structure to initialize.
- * \param[out] DataPtr Pointer to a global array that will hold the data stored into the ring buffer.
- * \param[out] Size Maximum number of bytes that can be stored in the underlying data array.
- */
- static inline void RingBuffer_InitBuffer(RingBuffer_t* Buffer, uint8_t* const DataPtr, const uint16_t Size)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
- static inline void RingBuffer_InitBuffer(RingBuffer_t* Buffer, uint8_t* const DataPtr, const uint16_t Size)
- {
- GCC_FORCE_POINTER_ACCESS(Buffer);
-
- uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
- GlobalInterruptDisable();
-
- Buffer->In = DataPtr;
- Buffer->Out = DataPtr;
- Buffer->Start = &DataPtr[0];
- Buffer->End = &DataPtr[Size];
- Buffer->Size = Size;
- Buffer->Count = 0;
-
- SetGlobalInterruptMask(CurrentGlobalInt);
- }
-
- /** Retrieves the current number of bytes stored in a particular buffer. This value is computed
- * by entering an atomic lock on the buffer, so that the buffer cannot be modified while the
- * computation takes place. This value should be cached when reading out the contents of the buffer,
- * so that as small a time as possible is spent in an atomic lock.
- *
- * \note The value returned by this function is guaranteed to only be the minimum number of bytes
- * stored in the given buffer; this value may change as other threads write new data, thus
- * the returned number should be used only to determine how many successive reads may safely
- * be performed on the buffer.
- *
- * \param[in] Buffer Pointer to a ring buffer structure whose count is to be computed.
- *
- * \return Number of bytes currently stored in the buffer.
- */
- static inline uint16_t RingBuffer_GetCount(RingBuffer_t* const Buffer) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static inline uint16_t RingBuffer_GetCount(RingBuffer_t* const Buffer)
- {
- uint16_t Count;
-
- uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
- GlobalInterruptDisable();
-
- Count = Buffer->Count;
-
- SetGlobalInterruptMask(CurrentGlobalInt);
- return Count;
- }
-
- /** Retrieves the free space in a particular buffer. This value is computed by entering an atomic lock
- * on the buffer, so that the buffer cannot be modified while the computation takes place.
- *
- * \note The value returned by this function is guaranteed to only be the maximum number of bytes
- * free in the given buffer; this value may change as other threads write new data, thus
- * the returned number should be used only to determine how many successive writes may safely
- * be performed on the buffer when there is a single writer thread.
- *
- * \param[in] Buffer Pointer to a ring buffer structure whose free count is to be computed.
- *
- * \return Number of free bytes in the buffer.
- */
- static inline uint16_t RingBuffer_GetFreeCount(RingBuffer_t* const Buffer) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static inline uint16_t RingBuffer_GetFreeCount(RingBuffer_t* const Buffer)
- {
- return (Buffer->Size - RingBuffer_GetCount(Buffer));
- }
-
- /** Atomically determines if the specified ring buffer contains any data. This should
- * be tested before removing data from the buffer, to ensure that the buffer does not
- * underflow.
- *
- * If the data is to be removed in a loop, store the total number of bytes stored in the
- * buffer (via a call to the \ref RingBuffer_GetCount() function) in a temporary variable
- * to reduce the time spent in atomicity locks.
- *
- * \param[in,out] Buffer Pointer to a ring buffer structure to insert into.
- *
- * \return Boolean \c true if the buffer contains no free space, false otherwise.
- */
- static inline bool RingBuffer_IsEmpty(RingBuffer_t* const Buffer) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static inline bool RingBuffer_IsEmpty(RingBuffer_t* const Buffer)
- {
- return (RingBuffer_GetCount(Buffer) == 0);
- }
-
- /** Atomically determines if the specified ring buffer contains any free space. This should
- * be tested before storing data to the buffer, to ensure that no data is lost due to a
- * buffer overrun.
- *
- * \param[in,out] Buffer Pointer to a ring buffer structure to insert into.
- *
- * \return Boolean \c true if the buffer contains no free space, false otherwise.
- */
- static inline bool RingBuffer_IsFull(RingBuffer_t* const Buffer) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static inline bool RingBuffer_IsFull(RingBuffer_t* const Buffer)
- {
- return (RingBuffer_GetCount(Buffer) == Buffer->Size);
- }
-
- /** Inserts an element into the ring buffer.
- *
- * \warning Only one execution thread (main program thread or an ISR) may insert into a single buffer
- * otherwise data corruption may occur. Insertion and removal may occur from different execution
- * threads.
- *
- * \param[in,out] Buffer Pointer to a ring buffer structure to insert into.
- * \param[in] Data Data element to insert into the buffer.
- */
- static inline void RingBuffer_Insert(RingBuffer_t* Buffer, const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
- static inline void RingBuffer_Insert(RingBuffer_t* Buffer, const uint8_t Data)
- {
- GCC_FORCE_POINTER_ACCESS(Buffer);
-
- *Buffer->In = Data;
-
- if (++Buffer->In == Buffer->End)
- Buffer->In = Buffer->Start;
-
- uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
- GlobalInterruptDisable();
-
- Buffer->Count++;
-
- SetGlobalInterruptMask(CurrentGlobalInt);
- }
-
- /** Removes an element from the ring buffer.
- *
- * \warning Only one execution thread (main program thread or an ISR) may remove from a single buffer
- * otherwise data corruption may occur. Insertion and removal may occur from different execution
- * threads.
- *
- * \param[in,out] Buffer Pointer to a ring buffer structure to retrieve from.
- *
- * \return Next data element stored in the buffer.
- */
- static inline uint8_t RingBuffer_Remove(RingBuffer_t* Buffer) ATTR_NON_NULL_PTR_ARG(1);
- static inline uint8_t RingBuffer_Remove(RingBuffer_t* Buffer)
- {
- GCC_FORCE_POINTER_ACCESS(Buffer);
-
- uint8_t Data = *Buffer->Out;
-
- if (++Buffer->Out == Buffer->End)
- Buffer->Out = Buffer->Start;
-
- uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
- GlobalInterruptDisable();
-
- Buffer->Count--;
-
- SetGlobalInterruptMask(CurrentGlobalInt);
-
- return Data;
- }
-
- /** Returns the next element stored in the ring buffer, without removing it.
- *
- * \param[in,out] Buffer Pointer to a ring buffer structure to retrieve from.
- *
- * \return Next data element stored in the buffer.
- */
- static inline uint8_t RingBuffer_Peek(RingBuffer_t* const Buffer) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static inline uint8_t RingBuffer_Peek(RingBuffer_t* const Buffer)
- {
- return *Buffer->Out;
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/TerminalCodes.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/TerminalCodes.h deleted file mode 100644 index 2f71a84b2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Misc/TerminalCodes.h +++ /dev/null @@ -1,231 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief ANSI terminal special escape code macros.
- *
- * ANSI terminal compatible escape sequences. These escape sequences are designed to be concatenated with existing
- * strings to modify their display on a compatible terminal application.
- */
-
-/** \ingroup Group_MiscDrivers
- * \defgroup Group_Terminal ANSI Terminal Escape Codes - LUFA/Drivers/Misc/TerminalCodes.h
- * \brief ANSI terminal special escape code macros.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Escape code macros for ANSI compliant text terminals.
- *
- * \note If desired, the macro \c DISABLE_TERMINAL_CODES can be defined in the project makefile and passed to the GCC
- * compiler via the -D switch to disable the terminal codes without modifying the source, for use with non
- * compatible terminals (any terminal codes then equate to empty strings).
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * printf("Normal String, "
- * ESC_BOLD_ON "Bold String, "
- * ESC_UNDERLINE_ON "Bold and Underlined String"
- * ESC_RESET ESC_FG_BLUE ESC_BG_YELLOW "Normal Blue-on-Yellow String");
- * \endcode
- *
- * @{
- */
-
-#ifndef __TERMINALCODES_H__
-#define __TERMINALCODES_H__
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if !defined(DISABLE_TERMINAL_CODES)
- /** Creates an ANSI escape sequence with the specified payload.
- *
- * \param[in] EscapeSeq Payload to encode as an ANSI escape sequence, a \c ESC_* mask.
- */
- #define ANSI_ESCAPE_SEQUENCE(EscapeSeq) "\33[" EscapeSeq
- #else
- #define ANSI_ESCAPE_SEQUENCE(EscapeSeq)
- #endif
-
- /** \name Text Display Modifier Control Sequences */
- //@{
- /** Turns on bold so that any following text is printed to the terminal in bold. */
- #define ESC_BOLD_ON ANSI_ESCAPE_SEQUENCE("1m")
-
- /** Turns on italics so that any following text is printed to the terminal in italics. */
- #define ESC_ITALICS_ON ANSI_ESCAPE_SEQUENCE("3m")
-
- /** Turns on underline so that any following text is printed to the terminal underlined. */
- #define ESC_UNDERLINE_ON ANSI_ESCAPE_SEQUENCE("4m")
-
- /** Turns on inverse so that any following text is printed to the terminal in inverted colours. */
- #define ESC_INVERSE_ON ANSI_ESCAPE_SEQUENCE("7m")
-
- /** Turns on strikethrough so that any following text is printed to the terminal with a line through the
- * center.
- */
- #define ESC_STRIKETHROUGH_ON ANSI_ESCAPE_SEQUENCE("9m")
-
- /** Turns off bold so that any following text is printed to the terminal in non bold. */
- #define ESC_BOLD_OFF ANSI_ESCAPE_SEQUENCE("22m")
-
- /** Turns off italics so that any following text is printed to the terminal in non italics. */
- #define ESC_ITALICS_OFF ANSI_ESCAPE_SEQUENCE("23m")
-
- /** Turns off underline so that any following text is printed to the terminal non underlined. */
- #define ESC_UNDERLINE_OFF ANSI_ESCAPE_SEQUENCE("24m")
-
- /** Turns off inverse so that any following text is printed to the terminal in non inverted colours. */
- #define ESC_INVERSE_OFF ANSI_ESCAPE_SEQUENCE("27m")
-
- /** Turns off strikethrough so that any following text is printed to the terminal without a line through
- * the center.
- */
- #define ESC_STRIKETHROUGH_OFF ANSI_ESCAPE_SEQUENCE("29m")
- //@}
-
- /** \name Text Colour Control Sequences */
- //@{
- /** Sets the foreground (text) colour to black. */
- #define ESC_FG_BLACK ANSI_ESCAPE_SEQUENCE("30m")
-
- /** Sets the foreground (text) colour to red. */
- #define ESC_FG_RED ANSI_ESCAPE_SEQUENCE("31m")
-
- /** Sets the foreground (text) colour to green. */
- #define ESC_FG_GREEN ANSI_ESCAPE_SEQUENCE("32m")
-
- /** Sets the foreground (text) colour to yellow. */
- #define ESC_FG_YELLOW ANSI_ESCAPE_SEQUENCE("33m")
-
- /** Sets the foreground (text) colour to blue. */
- #define ESC_FG_BLUE ANSI_ESCAPE_SEQUENCE("34m")
-
- /** Sets the foreground (text) colour to magenta. */
- #define ESC_FG_MAGENTA ANSI_ESCAPE_SEQUENCE("35m")
-
- /** Sets the foreground (text) colour to cyan. */
- #define ESC_FG_CYAN ANSI_ESCAPE_SEQUENCE("36m")
-
- /** Sets the foreground (text) colour to white. */
- #define ESC_FG_WHITE ANSI_ESCAPE_SEQUENCE("37m")
-
- /** Sets the foreground (text) colour to the terminal's default. */
- #define ESC_FG_DEFAULT ANSI_ESCAPE_SEQUENCE("39m")
-
- /** Sets the text background colour to black. */
- #define ESC_BG_BLACK ANSI_ESCAPE_SEQUENCE("40m")
-
- /** Sets the text background colour to red. */
- #define ESC_BG_RED ANSI_ESCAPE_SEQUENCE("41m")
-
- /** Sets the text background colour to green. */
- #define ESC_BG_GREEN ANSI_ESCAPE_SEQUENCE("42m")
-
- /** Sets the text background colour to yellow. */
- #define ESC_BG_YELLOW ANSI_ESCAPE_SEQUENCE("43m")
-
- /** Sets the text background colour to blue. */
- #define ESC_BG_BLUE ANSI_ESCAPE_SEQUENCE("44m")
-
- /** Sets the text background colour to magenta. */
- #define ESC_BG_MAGENTA ANSI_ESCAPE_SEQUENCE("45m")
-
- /** Sets the text background colour to cyan. */
- #define ESC_BG_CYAN ANSI_ESCAPE_SEQUENCE("46m")
-
- /** Sets the text background colour to white. */
- #define ESC_BG_WHITE ANSI_ESCAPE_SEQUENCE("47m")
-
- /** Sets the text background colour to the terminal's default. */
- #define ESC_BG_DEFAULT ANSI_ESCAPE_SEQUENCE("49m")
- //@}
-
- /** \name Cursor Positioning Control Sequences */
- //@{
- /** Saves the current cursor position so that it may be restored with \ref ESC_CURSOR_POS_RESTORE. */
- #define ESC_CURSOR_POS_SAVE ANSI_ESCAPE_SEQUENCE("s")
-
- /** Restores the cursor position to the last position saved with \ref ESC_CURSOR_POS_SAVE. */
- #define ESC_CURSOR_POS_RESTORE ANSI_ESCAPE_SEQUENCE("u")
-
- /** Sets the cursor position to the given line and column.
- *
- * \param[in] Line Line number to position the cursor at.
- * \param[in] Column Column number to position the cursor at.
- */
- #define ESC_CURSOR_POS(Line, Column) ANSI_ESCAPE_SEQUENCE(#Line ";" #Column "H")
-
- /** Moves the cursor up the given number of lines.
- *
- * \param[in] Lines Number of lines to move the cursor position
- */
- #define ESC_CURSOR_UP(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "A")
-
- /** Moves the cursor down the given number of lines.
- *
- * \param[in] Lines Number of lines to move the cursor position
- */
- #define ESC_CURSOR_DOWN(Lines) ANSI_ESCAPE_SEQUENCE(#Lines "B")
-
- /** Moves the cursor to the right the given number of columns.
- *
- * \param[in] Columns Number of columns to move the cursor position
- */
- #define ESC_CURSOR_FORWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "C")
-
- /** Moves the cursor to the left the given number of columns.
- *
- * \param[in] Columns Number of columns to move the cursor position
- */
- #define ESC_CURSOR_BACKWARD(Columns) ANSI_ESCAPE_SEQUENCE(#Columns "D")
- //@}
-
- /** \name Miscellaneous Control Sequences */
- //@{
- /** Resets any escape sequence modifiers back to their defaults. */
- #define ESC_RESET ANSI_ESCAPE_SEQUENCE("0m")
-
- /** Erases the entire display, returning the cursor to the top left. */
- #define ESC_ERASE_DISPLAY ANSI_ESCAPE_SEQUENCE("2J")
-
- /** Erases the current line, returning the cursor to the far left. */
- #define ESC_ERASE_LINE ANSI_ESCAPE_SEQUENCE("K")
- //@}
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/ADC.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/ADC.h deleted file mode 100644 index ebce11b33..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/ADC.h +++ /dev/null @@ -1,75 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Hardware Analogue-to-Digital converter driver.
- *
- * This file is the master dispatch header file for the device-specific ADC driver, for microcontrollers
- * containing an ADC.
- *
- * User code should include this file, which will in turn include the correct ADC driver header file for the
- * currently selected architecture and microcontroller model.
- */
-
-/** \ingroup Group_PeripheralDrivers
- * \defgroup Group_ADC ADC Driver - LUFA/Drivers/Peripheral/ADC.h
- * \brief Hardware Analogue-to-Digital converter driver.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Hardware ADC driver. This module provides an easy to use driver for the hardware ADC
- * present on many microcontrollers, for the conversion of analogue signals into the
- * digital domain.
- *
- * \note The exact API for this driver may vary depending on the target used - see
- * individual target module documentation for the API specific to your target processor.
- */
-
-#ifndef __ADC_H__
-#define __ADC_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_ADC_H
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/ADC_AVR8.h"
- #else
- #error The ADC peripheral driver is not currently available for your selected architecture.
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h deleted file mode 100644 index c002f79f7..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/ADC_AVR8.h +++ /dev/null @@ -1,456 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief ADC Peripheral Driver (AVR8)
- *
- * On-chip Analogue-to-Digital converter (ADC) driver for supported U4, U6 and U7 model AVRs that contain an ADC
- * peripheral internally.
- *
- * \note This file should not be included directly. It is automatically included as needed by the ADC driver
- * dispatch header located in LUFA/Drivers/Peripheral/ADC.h.
- */
-
-/** \ingroup Group_ADC
- * \defgroup Group_ADC_AVR8 ADC Peripheral Driver (AVR8)
- *
- * \section Sec_ModDescription Module Description
- * On-chip Analogue-to-Digital converter (ADC) driver for supported U4, U6 and U7 model AVRs that contain an ADC
- * peripheral internally.
- *
- * \note This file should not be included directly. It is automatically included as needed by the ADC driver
- * dispatch header located in LUFA/Drivers/Peripheral/ADC.h.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the ADC driver before first use
- * ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
- *
- * // Must setup the ADC channel to read beforehand
- * ADC_SetupChannel(1);
- *
- * // Perform a single conversion of the ADC channel 1
- * ADC_GetChannelReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
- * printf("Conversion Result: %d\r\n", ADC_GetResult());
- *
- * // Start reading ADC channel 1 in free running (continuous conversion) mode
- * ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | ADC_CHANNEL1);
- * for (;;)
- * {
- * while (!(ADC_IsReadingComplete())) {};
- * printf("Conversion Result: %d\r\n", ADC_GetResult());
- * }
- * \endcode
- *
- * @{
- */
-
-#ifndef __ADC_AVR8_H__
-#define __ADC_AVR8_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_ADC_H)
- #error Do not include this file directly. Include LUFA/Drivers/Peripheral/ADC.h instead.
- #endif
-
- #if !(defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
- defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
- defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || \
- defined(__AVR_ATmega32U6__))
- #error The ADC peripheral driver is not currently available for your selected microcontroller model.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define _ADC_GET_MUX_MASK2(y) ADC_CHANNEL ## y
- #define _ADC_GET_MUX_MASK(y) _ADC_GET_MUX_MASK2(y)
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name ADC Reference Configuration Masks */
- //@{
- /** Reference mask, for using the voltage present at the AVR's AREF pin for the ADC reference. */
- #define ADC_REFERENCE_AREF 0
-
- /** Reference mask, for using the voltage present at the AVR's AVCC pin for the ADC reference. */
- #define ADC_REFERENCE_AVCC (1 << REFS0)
-
- /** Reference mask, for using the internally generated 2.56V reference voltage as the ADC reference. */
- #define ADC_REFERENCE_INT2560MV ((1 << REFS1) | (1 << REFS0))
- //@}
-
- /** \name ADC Result Adjustment Configuration Masks */
- //@{
- /** Left-adjusts the 10-bit ADC result, so that the upper 8 bits of the value returned by the
- * \ref ADC_GetResult() macro contain the 8 most significant bits of the result.
- */
- #define ADC_LEFT_ADJUSTED (1 << ADLAR)
-
- /** Right-adjusts the 10-bit ADC result, so that the lower 8 bits of the value returned by the
- * \ref ADC_GetResult() macro contain the 8 least significant bits of the result.
- */
- #define ADC_RIGHT_ADJUSTED (0 << ADLAR)
- //@}
-
- /** \name ADC Mode Configuration Masks */
- //@{
- /** Sets the ADC mode to free running, so that conversions take place continuously as fast as the ADC
- * is capable of at the given input clock speed.
- */
- #define ADC_FREE_RUNNING (1 << ADATE)
-
- /** Sets the ADC mode to single conversion, so that only a single conversion will take place before
- * the ADC returns to idle.
- */
- #define ADC_SINGLE_CONVERSION (0 << ADATE)
- //@}
-
- /** \name ADC Prescaler Configuration Masks */
- //@{
- /** Sets the ADC input clock to prescale by a factor of 2 the AVR's system clock. */
- #define ADC_PRESCALE_2 (1 << ADPS0)
-
- /** Sets the ADC input clock to prescale by a factor of 4 the AVR's system clock. */
- #define ADC_PRESCALE_4 (1 << ADPS1)
-
- /** Sets the ADC input clock to prescale by a factor of 8 the AVR's system clock. */
- #define ADC_PRESCALE_8 ((1 << ADPS0) | (1 << ADPS1))
-
- /** Sets the ADC input clock to prescale by a factor of 16 the AVR's system clock. */
- #define ADC_PRESCALE_16 (1 << ADPS2)
-
- /** Sets the ADC input clock to prescale by a factor of 32 the AVR's system clock. */
- #define ADC_PRESCALE_32 ((1 << ADPS2) | (1 << ADPS0))
-
- /** Sets the ADC input clock to prescale by a factor of 64 the AVR's system clock. */
- #define ADC_PRESCALE_64 ((1 << ADPS2) | (1 << ADPS1))
-
- /** Sets the ADC input clock to prescale by a factor of 128 the AVR's system clock. */
- #define ADC_PRESCALE_128 ((1 << ADPS2) | (1 << ADPS1) | (1 << ADPS0))
- //@}
-
- /** \name ADC MUX Masks */
- //@{
- /** MUX mask define for the ADC0 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
- #define ADC_CHANNEL0 (0x00 << MUX0)
-
- /** MUX mask define for the ADC1 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
- #define ADC_CHANNEL1 (0x01 << MUX0)
-
- #if (!(defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__)) || defined(__DOXYGEN__))
- /** MUX mask define for the ADC2 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
- *
- * \note Not available on all AVR models.
- */
- #define ADC_CHANNEL2 (0x02 << MUX0)
-
- /** MUX mask define for the ADC3 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
- *
- * \note Not available on all AVR models.
- */
- #define ADC_CHANNEL3 (0x03 << MUX0)
- #endif
-
- /** MUX mask define for the ADC4 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
- #define ADC_CHANNEL4 (0x04 << MUX0)
-
- /** MUX mask define for the ADC5 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
- #define ADC_CHANNEL5 (0x05 << MUX0)
-
- /** MUX mask define for the ADC6 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
- #define ADC_CHANNEL6 (0x06 << MUX0)
-
- /** MUX mask define for the ADC7 channel of the ADC. See \ref ADC_StartReading and \ref ADC_GetChannelReading. */
- #define ADC_CHANNEL7 (0x07 << MUX0)
-
- #if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__DOXYGEN__))
- /** MUX mask define for the ADC8 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
- *
- * \note Not available on all AVR models.
- */
- #define ADC_CHANNEL8 ((1 << 8) | (0x00 << MUX0))
-
- /** MUX mask define for the ADC9 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
- *
- * \note Not available on all AVR models.
- */
- #define ADC_CHANNEL9 ((1 << 8) | (0x01 << MUX0))
-
- /** MUX mask define for the ADC10 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
- *
- * \note Not available on all AVR models.
- */
- #define ADC_CHANNEL10 ((1 << 8) | (0x02 << MUX0))
-
- /** MUX mask define for the ADC11 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
- *
- * \note Not available on all AVR models.
- */
- #define ADC_CHANNEL11 ((1 << 8) | (0x03 << MUX0))
-
- /** MUX mask define for the ADC12 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
- *
- * \note Not available on all AVR models.
- */
- #define ADC_CHANNEL12 ((1 << 8) | (0x04 << MUX0))
-
- /** MUX mask define for the ADC13 channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading().
- *
- * \note Not available on all AVR models.
- */
- #define ADC_CHANNEL13 ((1 << 8) | (0x05 << MUX0))
-
- /** MUX mask define for the internal temperature sensor channel of the ADC. See \ref ADC_StartReading() and
- * \ref ADC_GetChannelReading().
- *
- * \note Not available on all AVR models.
- */
- #define ADC_INT_TEMP_SENS ((1 << 8) | (0x07 << MUX0))
- #endif
-
- /** MUX mask define for the internal 1.1V band-gap channel of the ADC. See \ref ADC_StartReading() and \ref ADC_GetChannelReading(). */
- #define ADC_1100MV_BANDGAP (0x1E << MUX0)
-
- /** Retrieves the ADC MUX mask for the given ADC channel number.
- *
- * \attention This macro will only work correctly on channel numbers that are compile-time
- * constants defined by the preprocessor.
- *
- * \param[in] Channel Index of the ADC channel whose MUX mask is to be retrieved.
- */
- #define ADC_GET_CHANNEL_MASK(Channel) _ADC_GET_MUX_MASK(Channel)
- //@}
-
- /* Inline Functions: */
- /** Configures the given ADC channel, ready for ADC conversions. This function sets the
- * associated port pin as an input and disables the digital portion of the I/O to reduce
- * power consumption.
- *
- * \note This must only be called for ADC channels with are connected to a physical port
- * pin of the AVR, denoted by its special alternative function ADCx.
- *
- * \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
- *
- * \param[in] ChannelIndex ADC channel number to set up for conversions.
- */
- static inline void ADC_SetupChannel(const uint8_t ChannelIndex)
- {
- #if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
- defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
- defined(__AVR_ATmega32U6__))
- DDRF &= ~(1 << ChannelIndex);
- DIDR0 |= (1 << ChannelIndex);
- #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
- if (ChannelIndex < 8)
- {
- DDRF &= ~(1 << ChannelIndex);
- DIDR0 |= (1 << ChannelIndex);
- }
- else if (ChannelIndex == 8)
- {
- DDRD &= ~(1 << 4);
- DIDR2 |= (1 << 0);
- }
- else if (ChannelIndex < 11)
- {
- DDRD &= ~(1 << (ChannelIndex - 3));
- DIDR2 |= (1 << (ChannelIndex - 8));
- }
- else
- {
- DDRB &= ~(1 << (ChannelIndex - 7));
- DIDR2 |= (1 << (ChannelIndex - 8));
- }
- #endif
- }
-
- /** De-configures the given ADC channel, re-enabling digital I/O mode instead of analog. This
- * function sets the associated port pin as an input and re-enabled the digital portion of
- * the I/O.
- *
- * \note This must only be called for ADC channels with are connected to a physical port
- * pin of the AVR, denoted by its special alternative function ADCx.
- *
- * \warning The channel number must be specified as an integer, and <b>not</b> a \c ADC_CHANNEL* mask.
- *
- * \param[in] ChannelIndex ADC channel number to set up for conversions.
- */
- static inline void ADC_DisableChannel(const uint8_t ChannelIndex)
- {
- #if (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
- defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
- defined(__AVR_ATmega32U6__))
- DDRF &= ~(1 << ChannelIndex);
- DIDR0 &= ~(1 << ChannelIndex);
- #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
- if (ChannelIndex < 8)
- {
- DDRF &= ~(1 << ChannelIndex);
- DIDR0 &= ~(1 << ChannelIndex);
- }
- else if (ChannelIndex == 8)
- {
- DDRD &= ~(1 << 4);
- DIDR2 &= ~(1 << 0);
- }
- else if (ChannelIndex < 11)
- {
- DDRD &= ~(1 << (ChannelIndex - 3));
- DIDR2 &= ~(1 << (ChannelIndex - 8));
- }
- else
- {
- DDRB &= ~(1 << (ChannelIndex - 7));
- DIDR2 &= ~(1 << (ChannelIndex - 8));
- }
- #endif
- }
-
- /** Starts the reading of the given channel, but does not wait until the conversion has completed.
- * Once executed, the conversion status can be determined via the \ref ADC_IsReadingComplete() macro and
- * the result read via the \ref ADC_GetResult() macro.
- *
- * If the ADC has been initialized in free running mode, calling this function once will begin the repeated
- * conversions. If the ADC is in single conversion mode (or the channel to convert from is to be changed),
- * this function must be called each time a conversion is to take place.
- *
- * \param[in] MUXMask ADC channel mask, reference mask and adjustment mask.
- */
- static inline void ADC_StartReading(const uint16_t MUXMask)
- {
- ADMUX = MUXMask;
-
- #if (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || defined(__DOXYGEN__))
- if (MUXMask & (1 << 8))
- ADCSRB |= (1 << MUX5);
- else
- ADCSRB &= ~(1 << MUX5);
- #endif
-
- ADCSRA |= (1 << ADSC);
- }
-
- /** Indicates if the current ADC conversion is completed, or still in progress.
- *
- * \return Boolean false if the reading is still taking place, or true if the conversion is
- * complete and ready to be read out with \ref ADC_GetResult().
- */
- static inline bool ADC_IsReadingComplete(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool ADC_IsReadingComplete(void)
- {
- return ((ADCSRA & (1 << ADIF)) ? true : false);
- }
-
- /** Retrieves the conversion value of the last completed ADC conversion and clears the reading
- * completion flag.
- *
- * \return The result of the last ADC conversion as an unsigned value.
- */
- static inline uint16_t ADC_GetResult(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t ADC_GetResult(void)
- {
- ADCSRA |= (1 << ADIF);
- return ADC;
- }
-
- /** Performs a complete single reading from channel, including a polling spin-loop to wait for the
- * conversion to complete, and the returning of the converted value.
- *
- * \note For free running mode, the automated conversions should be initialized with a single call
- * to \ref ADC_StartReading() to select the channel and begin the automated conversions, and
- * the results read directly from the \ref ADC_GetResult() instead to reduce overhead.
- *
- * \param[in] MUXMask Mask comprising of an ADC channel mask, reference mask and adjustment mask.
- *
- * \return Converted ADC result for the given ADC channel.
- */
- static inline uint16_t ADC_GetChannelReading(const uint16_t MUXMask) ATTR_WARN_UNUSED_RESULT;
- static inline uint16_t ADC_GetChannelReading(const uint16_t MUXMask)
- {
- ADC_StartReading(MUXMask);
-
- while (!(ADC_IsReadingComplete()));
-
- return ADC_GetResult();
- }
-
- /** Initializes the ADC, ready for conversions. This must be called before any other ADC operations.
- * The "mode" parameter should be a mask comprised of a conversion mode (free running or single) and
- * prescaler masks.
- *
- * \param[in] Mode Mask of ADC prescale and mode settings.
- */
- static inline void ADC_Init(const uint8_t Mode) ATTR_ALWAYS_INLINE;
- static inline void ADC_Init(const uint8_t Mode)
- {
- ADCSRA = ((1 << ADEN) | Mode);
- }
-
- /** Turns off the ADC. If this is called, any further ADC operations will require a call to
- * \ref ADC_Init() before the ADC can be used again.
- */
- static inline void ADC_Disable(void) ATTR_ALWAYS_INLINE;
- static inline void ADC_Disable(void)
- {
- ADCSRA = 0;
- }
-
- /** Indicates if the ADC is currently enabled.
- *
- * \return Boolean \c true if the ADC subsystem is currently enabled, \c false otherwise.
- */
- static inline bool ADC_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool ADC_GetStatus(void)
- {
- return ((ADCSRA & (1 << ADEN)) ? true : false);
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h deleted file mode 100644 index dde3ec5a7..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h +++ /dev/null @@ -1,256 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief SPI Peripheral Driver (AVR8)
- *
- * On-chip SPI driver for the 8-bit AVR microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the SPI driver
- * dispatch header located in LUFA/Drivers/Peripheral/SPI.h.
- */
-
-/** \ingroup Group_SPI
- * \defgroup Group_SPI_AVR8 SPI Peripheral Driver (AVR8)
- *
- * \section Sec_ModDescription Module Description
- * Driver for the hardware SPI port available on most 8-bit AVR microcontroller models. This
- * module provides an easy to use driver for the setup and transfer of data over the
- * AVR's SPI port.
- *
- * \note This file should not be included directly. It is automatically included as needed by the SPI driver
- * dispatch header located in LUFA/Drivers/Peripheral/SPI.h.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the SPI driver before first use
- * SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
- * SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
- *
- * // Send several bytes, ignoring the returned data
- * SPI_SendByte(0x01);
- * SPI_SendByte(0x02);
- * SPI_SendByte(0x03);
- *
- * // Receive several bytes, sending a dummy 0x00 byte each time
- * uint8_t Byte1 = SPI_ReceiveByte();
- * uint8_t Byte2 = SPI_ReceiveByte();
- * uint8_t Byte3 = SPI_ReceiveByte();
- *
- * // Send a byte, and store the received byte from the same transaction
- * uint8_t ResponseByte = SPI_TransferByte(0xDC);
- * \endcode
- *
- * @{
- */
-
-#ifndef __SPI_AVR8_H__
-#define __SPI_AVR8_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_SPI_H)
- #error Do not include this file directly. Include LUFA/Drivers/Peripheral/SPI.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define SPI_USE_DOUBLESPEED (1 << SPE)
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name SPI Prescaler Configuration Masks */
- //@{
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 2. */
- #define SPI_SPEED_FCPU_DIV_2 SPI_USE_DOUBLESPEED
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 4. */
- #define SPI_SPEED_FCPU_DIV_4 0
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 8. */
- #define SPI_SPEED_FCPU_DIV_8 (SPI_USE_DOUBLESPEED | (1 << SPR0))
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 16. */
- #define SPI_SPEED_FCPU_DIV_16 (1 << SPR0)
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 32. */
- #define SPI_SPEED_FCPU_DIV_32 (SPI_USE_DOUBLESPEED | (1 << SPR1))
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 64. */
- #define SPI_SPEED_FCPU_DIV_64 (SPI_USE_DOUBLESPEED | (1 << SPR1) | (1 << SPR0))
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 128. */
- #define SPI_SPEED_FCPU_DIV_128 ((1 << SPR1) | (1 << SPR0))
- //@}
-
- /** \name SPI SCK Polarity Configuration Masks */
- //@{
- /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
- #define SPI_SCK_LEAD_RISING (0 << CPOL)
-
- /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
- #define SPI_SCK_LEAD_FALLING (1 << CPOL)
- //@}
-
- /** \name SPI Sample Edge Configuration Masks */
- //@{
- /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should sampled on the leading edge. */
- #define SPI_SAMPLE_LEADING (0 << CPHA)
-
- /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
- #define SPI_SAMPLE_TRAILING (1 << CPHA)
- //@}
-
- /** \name SPI Data Ordering Configuration Masks */
- //@{
- /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out MSB first. */
- #define SPI_ORDER_MSB_FIRST (0 << DORD)
-
- /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out LSB first. */
- #define SPI_ORDER_LSB_FIRST (1 << DORD)
- //@}
-
- /** \name SPI Mode Configuration Masks */
- //@{
- /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
- #define SPI_MODE_SLAVE (0 << MSTR)
-
- /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
- #define SPI_MODE_MASTER (1 << MSTR)
- //@}
-
- /* Inline Functions: */
- /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
- * SPI routines.
- *
- * \param[in] SPIOptions SPI Options, a mask consisting of one of each of the \c SPI_SPEED_*,
- * \c SPI_SCK_*, \c SPI_SAMPLE_*, \c SPI_ORDER_* and \c SPI_MODE_* masks.
- */
- static inline void SPI_Init(const uint8_t SPIOptions)
- {
- /* Prevent high rise times on PB.0 (/SS) from forcing a change to SPI slave mode */
- DDRB |= (1 << 0);
- PORTB |= (1 << 0);
-
- DDRB |= ((1 << 1) | (1 << 2));
- DDRB &= ~(1 << 3);
- PORTB |= (1 << 3);
-
- if (SPIOptions & SPI_USE_DOUBLESPEED)
- SPSR |= (1 << SPI2X);
- else
- SPSR &= ~(1 << SPI2X);
-
- /* Switch /SS to input mode after configuration to allow for forced mode changes */
- DDRB &= ~(1 << 0);
-
- SPCR = ((1 << SPE) | SPIOptions);
- }
-
- /** Turns off the SPI driver, disabling and returning used hardware to their default configuration. */
- static inline void SPI_Disable(void)
- {
- DDRB &= ~((1 << 1) | (1 << 2));
- PORTB &= ~((1 << 0) | (1 << 3));
-
- SPCR = 0;
- SPSR = 0;
- }
-
- /** Retrieves the currently selected SPI mode, once the SPI interface has been configured.
- *
- * \return \ref SPI_MODE_MASTER if the interface is currently in SPI Master mode, \ref SPI_MODE_SLAVE otherwise
- */
- static inline uint8_t SPI_GetCurrentMode(void) ATTR_ALWAYS_INLINE;
- static inline uint8_t SPI_GetCurrentMode(void)
- {
- return (SPCR & SPI_MODE_MASTER);
- }
-
- /** Sends and receives a byte through the SPI interface, blocking until the transfer is complete.
- *
- * \param[in] Byte Byte to send through the SPI interface.
- *
- * \return Response byte from the attached SPI device.
- */
- static inline uint8_t SPI_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline uint8_t SPI_TransferByte(const uint8_t Byte)
- {
- SPDR = Byte;
- while (!(SPSR & (1 << SPIF)));
- return SPDR;
- }
-
- /** Sends a byte through the SPI interface, blocking until the transfer is complete. The response
- * byte sent to from the attached SPI device is ignored.
- *
- * \param[in] Byte Byte to send through the SPI interface.
- */
- static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline void SPI_SendByte(const uint8_t Byte)
- {
- SPDR = Byte;
- while (!(SPSR & (1 << SPIF)));
- }
-
- /** Sends a dummy byte through the SPI interface, blocking until the transfer is complete. The response
- * byte from the attached SPI device is returned.
- *
- * \return The response byte from the attached SPI device.
- */
- static inline uint8_t SPI_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t SPI_ReceiveByte(void)
- {
- SPDR = 0x00;
- while (!(SPSR & (1 << SPIF)));
- return SPDR;
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h deleted file mode 100644 index 9a122f501..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/SerialSPI_AVR8.h +++ /dev/null @@ -1,200 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master SPI Mode Serial USART Peripheral Driver (XMEGA)
- *
- * On-chip Master SPI mode USART driver for the XMEGA AVR microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the SPI Master
- * Mode USART driver dispatch header located in LUFA/Drivers/Peripheral/Serial.h.
- */
-
-/** \ingroup Group_SerialSPI
- * \defgroup Group_SerialSPI_AVR8 Master SPI Mode Serial USART Peripheral Driver (AVR8)
- *
- * \section Sec_ModDescription Module Description
- * On-chip serial USART driver for the 8-bit AVR8 microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the SPI Master
- * driver dispatch header located in LUFA/Drivers/Peripheral/SerialSPI.h.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud
- * SerialSPI_Init((USART_SPI_SCK_LEAD_RISING | SPI_SAMPLE_LEADING | SPI_ORDER_MSB_FIRST), 1000000);
- *
- * // Send several bytes, ignoring the returned data
- * SerialSPI_SendByte(0x01);
- * SerialSPI_SendByte(0x02);
- * SerialSPI_SendByte(0x03);
- *
- * // Receive several bytes, sending a dummy 0x00 byte each time
- * uint8_t Byte1 = SerialSPI_ReceiveByte();
- * uint8_t Byte2 = SerialSPI_ReceiveByte();
- * uint8_t Byte3 = SerialSPI_ReceiveByte();
- *
- * // Send a byte, and store the received byte from the same transaction
- * uint8_t ResponseByte = SerialSPI_TransferByte(0xDC);
- * \endcode
- *
- * @{
- */
-
-#ifndef __SERIAL_SPI_AVR8_H__
-#define __SERIAL_SPI_AVR8_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
-
- #include <stdio.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_SERIAL_SPI_H)
- #error Do not include this file directly. Include LUFA/Drivers/Peripheral/Serial.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- #define SERIAL_SPI_UBBRVAL(Baud) ((Baud < (F_CPU / 2)) ? ((F_CPU / (2 * Baud)) - 1) : 0)
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name SPI SCK Polarity Configuration Masks */
- //@{
- /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
- #define USART_SPI_SCK_LEAD_RISING (0 << UCPOL)
-
- /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
- #define USART_SPI_SCK_LEAD_FALLING (1 << UCPOL)
- //@}
-
- /** \name SPI Sample Edge Configuration Masks */
- //@{
- /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
- #define USART_SPI_SAMPLE_LEADING (0 << UPCHA)
-
- /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
- #define USART_SPI_SAMPLE_TRAILING (1 << UPCHA)
- //@}
-
- /** \name SPI Data Ordering Configuration Masks */
- //@{
- /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
- #define USART_SPI_ORDER_MSB_FIRST (0 << UDORD)
-
- /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */
- #define USART_SPI_ORDER_LSB_FIRST (1 << UDORD)
- //@}
-
- /* Inline Functions: */
- /** Initialize the USART module in Master SPI mode.
- *
- * \param[in] SPIOptions USART SPI Options, a mask consisting of one of each of the \c USART_SPI_SCK_*,
- * \c USART_SPI_SAMPLE_* and \c USART_SPI_ORDER_* masks.
- * \param[in] BaudRate SPI baud rate, in bits per second.
- */
- static inline void SerialSPI_Init(const uint8_t SPIOptions,
- const uint32_t BaudRate)
- {
- UBRR1 = SERIAL_SPI_UBBRVAL(BaudRate);
-
- UCSR1C = ((1 << UMSEL11) | (1 << UMSEL10) | SPIOptions);
- UCSR1B = ((1 << TXEN1) | (1 << RXEN1));
-
- DDRD |= (1 << 3);
- PORTD |= (1 << 2);
- }
-
- /** Turns off the USART driver, disabling and returning used hardware to their default configuration. */
- static inline void SerialSPI_Disable(void)
- {
- UCSR1B = 0;
- UCSR1A = 0;
- UCSR1C = 0;
-
- UBRR1 = 0;
-
- DDRD &= ~(1 << 3);
- PORTD &= ~(1 << 2);
- }
-
- /** Sends and receives a byte through the USART SPI interface, blocking until the transfer is complete.
- *
- * \param[in] DataByte Byte to send through the USART SPI interface.
- *
- * \return Response byte from the attached SPI device.
- */
- static inline uint8_t SerialSPI_TransferByte(const uint8_t DataByte)
- {
- UDR1 = DataByte;
- while (!(UCSR1A & (1 << TXC1)));
- UCSR1A = (1 << TXC1);
- return UDR1;
- }
-
- /** Sends a byte through the USART SPI interface, blocking until the transfer is complete. The response
- * byte sent to from the attached SPI device is ignored.
- *
- * \param[in] DataByte Byte to send through the USART SPI interface.
- */
- static inline void SerialSPI_SendByte(const uint8_t DataByte)
- {
- SerialSPI_TransferByte(DataByte);
- }
-
- /** Sends a dummy byte through the USART SPI interface, blocking until the transfer is complete. The response
- * byte from the attached SPI device is returned.
- *
- * \return The response byte from the attached SPI device.
- */
- static inline uint8_t SerialSPI_ReceiveByte(void)
- {
- return SerialSPI_TransferByte(0);
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.c deleted file mode 100644 index a1f64b022..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.c +++ /dev/null @@ -1,119 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../Common/Common.h"
-#if (ARCH == ARCH_AVR8)
-
-#define __INCLUDE_FROM_SERIAL_C
-#include "../Serial.h"
-
-FILE USARTSerialStream;
-
-int Serial_putchar(char DataByte,
- FILE *Stream)
-{
- (void)Stream;
-
- Serial_SendByte(DataByte);
- return 0;
-}
-
-int Serial_getchar(FILE *Stream)
-{
- (void)Stream;
-
- if (!(Serial_IsCharReceived()))
- return _FDEV_EOF;
-
- return Serial_ReceiveByte();
-}
-
-int Serial_getchar_Blocking(FILE *Stream)
-{
- (void)Stream;
-
- while (!(Serial_IsCharReceived()));
- return Serial_ReceiveByte();
-}
-
-void Serial_SendString_P(const char* FlashStringPtr)
-{
- uint8_t CurrByte;
-
- while ((CurrByte = pgm_read_byte(FlashStringPtr)) != 0x00)
- {
- Serial_SendByte(CurrByte);
- FlashStringPtr++;
- }
-}
-
-void Serial_SendString(const char* StringPtr)
-{
- uint8_t CurrByte;
-
- while ((CurrByte = *StringPtr) != 0x00)
- {
- Serial_SendByte(CurrByte);
- StringPtr++;
- }
-}
-
-void Serial_SendData(const uint8_t* Buffer,
- uint16_t Length)
-{
- while (Length--)
- Serial_SendByte(*(Buffer++));
-}
-
-void Serial_CreateStream(FILE* Stream)
-{
- if (!(Stream))
- {
- Stream = &USARTSerialStream;
- stdin = Stream;
- stdout = Stream;
- }
-
- *Stream = (FILE)FDEV_SETUP_STREAM(Serial_putchar, Serial_getchar, _FDEV_SETUP_RW);
-}
-
-void Serial_CreateBlockingStream(FILE* Stream)
-{
- if (!(Stream))
- {
- Stream = &USARTSerialStream;
- stdin = Stream;
- stdout = Stream;
- }
-
- *Stream = (FILE)FDEV_SETUP_STREAM(Serial_putchar, Serial_getchar_Blocking, _FDEV_SETUP_RW);
-}
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h deleted file mode 100644 index 8416082f5..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/Serial_AVR8.h +++ /dev/null @@ -1,239 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Serial USART Peripheral Driver (AVR8)
- *
- * On-chip serial USART driver for the 8-bit AVR microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USART driver
- * dispatch header located in LUFA/Drivers/Peripheral/Serial.h.
- */
-
-/** \ingroup Group_Serial
- * \defgroup Group_Serial_AVR8 Serial USART Peripheral Driver (AVR8)
- *
- * \section Sec_ModDescription Module Description
- * On-chip serial USART driver for the 8-bit AVR microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USART driver
- * dispatch header located in LUFA/Drivers/Peripheral/Serial.h.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
- * Serial_Init(9600, false);
- *
- * // Send a string through the USART
- * Serial_TxString("Test String\r\n");
- *
- * // Receive a byte through the USART
- * uint8_t DataByte = Serial_RxByte();
- * \endcode
- *
- * @{
- */
-
-#ifndef __SERIAL_AVR8_H__
-#define __SERIAL_AVR8_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "../../Misc/TerminalCodes.h"
-
- #include <stdio.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_SERIAL_H) && !defined(__INCLUDE_FROM_SERIAL_C)
- #error Do not include this file directly. Include LUFA/Drivers/Peripheral/Serial.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* External Variables: */
- extern FILE USARTSerialStream;
-
- /* Function Prototypes: */
- int Serial_putchar(char DataByte,
- FILE *Stream);
- int Serial_getchar(FILE *Stream);
- int Serial_getchar_Blocking(FILE *Stream);
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Macro for calculating the baud value from a given baud rate when the \c U2X (double speed) bit is
- * not set.
- *
- * \param[in] Baud Target serial UART baud rate.
- *
- * \return Closest UBRR register value for the given UART frequency.
- */
- #define SERIAL_UBBRVAL(Baud) ((((F_CPU / 16) + (Baud / 2)) / (Baud)) - 1)
-
- /** Macro for calculating the baud value from a given baud rate when the \c U2X (double speed) bit is
- * set.
- *
- * \param[in] Baud Target serial UART baud rate.
- *
- * \return Closest UBRR register value for the given UART frequency.
- */
- #define SERIAL_2X_UBBRVAL(Baud) ((((F_CPU / 8) + (Baud / 2)) / (Baud)) - 1)
-
- /* Function Prototypes: */
- /** Transmits a given string located in program space (FLASH) through the USART.
- *
- * \param[in] FlashStringPtr Pointer to a string located in program space.
- */
- void Serial_SendString_P(const char* FlashStringPtr) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Transmits a given string located in SRAM memory through the USART.
- *
- * \param[in] StringPtr Pointer to a string located in SRAM space.
- */
- void Serial_SendString(const char* StringPtr) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Transmits a given buffer located in SRAM memory through the USART.
- *
- * \param[in] Buffer Pointer to a buffer containing the data to send.
- * \param[in] Length Length of the data to send, in bytes.
- */
- void Serial_SendData(const uint8_t* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Creates a standard character stream from the USART so that it can be used with all the regular functions
- * in the avr-libc \c <stdio.h> library that accept a \c FILE stream as a destination (e.g. \c fprintf). The created
- * stream is bidirectional and can be used for both input and output functions.
- *
- * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single
- * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may
- * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own
- * line buffering.
- *
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed, if \c NULL, \c stdout
- * and \c stdin will be configured to use the USART.
- *
- * \pre The USART must first be configured via a call to \ref Serial_Init() before the stream is used.
- */
- void Serial_CreateStream(FILE* Stream);
-
- /** Identical to \ref Serial_CreateStream(), except that reads are blocking until the calling stream function terminates
- * the transfer.
- *
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed, if \c NULL, \c stdout
- * and \c stdin will be configured to use the USART.
- *
- * \pre The USART must first be configured via a call to \ref Serial_Init() before the stream is used.
- */
- void Serial_CreateBlockingStream(FILE* Stream);
-
- /* Inline Functions: */
- /** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to
- * standard 8-bit, no parity, 1 stop bit settings suitable for most applications.
- *
- * \param[in] BaudRate Serial baud rate, in bits per second.
- * \param[in] DoubleSpeed Enables double speed mode when set, halving the sample time to double the baud rate.
- */
- static inline void Serial_Init(const uint32_t BaudRate,
- const bool DoubleSpeed)
- {
- UBRR1 = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate));
-
- UCSR1C = ((1 << UCSZ11) | (1 << UCSZ10));
- UCSR1A = (DoubleSpeed ? (1 << U2X1) : 0);
- UCSR1B = ((1 << TXEN1) | (1 << RXEN1));
-
- DDRD |= (1 << 3);
- PORTD |= (1 << 2);
- }
-
- /** Turns off the USART driver, disabling and returning used hardware to their default configuration. */
- static inline void Serial_Disable(void)
- {
- UCSR1B = 0;
- UCSR1A = 0;
- UCSR1C = 0;
-
- UBRR1 = 0;
-
- DDRD &= ~(1 << 3);
- PORTD &= ~(1 << 2);
- }
-
- /** Indicates whether a character has been received through the USART.
- *
- * \return Boolean \c true if a character has been received, \c false otherwise.
- */
- static inline bool Serial_IsCharReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Serial_IsCharReceived(void)
- {
- return ((UCSR1A & (1 << RXC1)) ? true : false);
- }
-
- /** Transmits a given byte through the USART.
- *
- * \param[in] DataByte Byte to transmit through the USART.
- */
- static inline void Serial_SendByte(const char DataByte) ATTR_ALWAYS_INLINE;
- static inline void Serial_SendByte(const char DataByte)
- {
- while (!(UCSR1A & (1 << UDRE1)));
- UDR1 = DataByte;
- }
-
- /** Receives the next byte from the USART.
- *
- * \return Next byte received from the USART, or a negative value if no byte has been received.
- */
- static inline int16_t Serial_ReceiveByte(void) ATTR_ALWAYS_INLINE;
- static inline int16_t Serial_ReceiveByte(void)
- {
- if (!(Serial_IsCharReceived()))
- return -1;
-
- return UDR1;
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c deleted file mode 100644 index 3cc3f0b6d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c +++ /dev/null @@ -1,207 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../Common/Common.h"
-#if (ARCH == ARCH_AVR8) && defined(TWCR)
-
-#define __INCLUDE_FROM_TWI_C
-#include "../TWI.h"
-
-uint8_t TWI_StartTransmission(const uint8_t SlaveAddress,
- const uint8_t TimeoutMS)
-{
- for (;;)
- {
- bool BusCaptured = false;
- uint16_t TimeoutRemaining;
-
- TWCR = ((1 << TWINT) | (1 << TWSTA) | (1 << TWEN));
-
- TimeoutRemaining = (TimeoutMS * 100);
- while (TimeoutRemaining-- && !(BusCaptured))
- {
- if (TWCR & (1 << TWINT))
- {
- switch (TWSR & TW_STATUS_MASK)
- {
- case TW_START:
- case TW_REP_START:
- BusCaptured = true;
- break;
- case TW_MT_ARB_LOST:
- TWCR = ((1 << TWINT) | (1 << TWSTA) | (1 << TWEN));
- continue;
- default:
- TWCR = (1 << TWEN);
- return TWI_ERROR_BusFault;
- }
- }
-
- _delay_us(10);
- }
-
- if (!(TimeoutRemaining))
- {
- TWCR = (1 << TWEN);
- return TWI_ERROR_BusCaptureTimeout;
- }
-
- TWDR = SlaveAddress;
- TWCR = ((1 << TWINT) | (1 << TWEN));
-
- TimeoutRemaining = (TimeoutMS * 100);
- while (TimeoutRemaining--)
- {
- if (TWCR & (1 << TWINT))
- break;
-
- _delay_us(10);
- }
-
- if (!(TimeoutRemaining))
- return TWI_ERROR_SlaveResponseTimeout;
-
- switch (TWSR & TW_STATUS_MASK)
- {
- case TW_MT_SLA_ACK:
- case TW_MR_SLA_ACK:
- return TWI_ERROR_NoError;
- default:
- TWCR = ((1 << TWINT) | (1 << TWSTO) | (1 << TWEN));
- return TWI_ERROR_SlaveNotReady;
- }
- }
-}
-
-bool TWI_SendByte(const uint8_t Byte)
-{
- TWDR = Byte;
- TWCR = ((1 << TWINT) | (1 << TWEN));
- while (!(TWCR & (1 << TWINT)));
-
- return ((TWSR & TW_STATUS_MASK) == TW_MT_DATA_ACK);
-}
-
-bool TWI_ReceiveByte(uint8_t* const Byte,
- const bool LastByte)
-{
- uint8_t TWCRMask;
-
- if (LastByte)
- TWCRMask = ((1 << TWINT) | (1 << TWEN));
- else
- TWCRMask = ((1 << TWINT) | (1 << TWEN) | (1 << TWEA));
-
- TWCR = TWCRMask;
- while (!(TWCR & (1 << TWINT)));
- *Byte = TWDR;
-
- uint8_t Status = (TWSR & TW_STATUS_MASK);
-
- return ((LastByte) ? (Status == TW_MR_DATA_NACK) : (Status == TW_MR_DATA_ACK));
-}
-
-uint8_t TWI_ReadPacket(const uint8_t SlaveAddress,
- const uint8_t TimeoutMS,
- const uint8_t* InternalAddress,
- uint8_t InternalAddressLen,
- uint8_t* Buffer,
- uint8_t Length)
-{
- uint8_t ErrorCode;
-
- if ((ErrorCode = TWI_StartTransmission((SlaveAddress & TWI_DEVICE_ADDRESS_MASK) | TWI_ADDRESS_WRITE,
- TimeoutMS)) == TWI_ERROR_NoError)
- {
- while (InternalAddressLen--)
- {
- if (!(TWI_SendByte(*(InternalAddress++))))
- {
- ErrorCode = TWI_ERROR_SlaveNAK;
- break;
- }
- }
-
- if ((ErrorCode = TWI_StartTransmission((SlaveAddress & TWI_DEVICE_ADDRESS_MASK) | TWI_ADDRESS_READ,
- TimeoutMS)) == TWI_ERROR_NoError)
- {
- while (Length--)
- {
- if (!(TWI_ReceiveByte(Buffer++, (Length == 0))))
- {
- ErrorCode = TWI_ERROR_SlaveNAK;
- break;
- }
- }
-
- TWI_StopTransmission();
- }
- }
-
- return ErrorCode;
-}
-
-uint8_t TWI_WritePacket(const uint8_t SlaveAddress,
- const uint8_t TimeoutMS,
- const uint8_t* InternalAddress,
- uint8_t InternalAddressLen,
- const uint8_t* Buffer,
- uint8_t Length)
-{
- uint8_t ErrorCode;
-
- if ((ErrorCode = TWI_StartTransmission((SlaveAddress & TWI_DEVICE_ADDRESS_MASK) | TWI_ADDRESS_WRITE,
- TimeoutMS)) == TWI_ERROR_NoError)
- {
- while (InternalAddressLen--)
- {
- if (!(TWI_SendByte(*(InternalAddress++))))
- {
- ErrorCode = TWI_ERROR_SlaveNAK;
- break;
- }
- }
-
- while (Length--)
- {
- if (!(TWI_SendByte(*(Buffer++))))
- {
- ErrorCode = TWI_ERROR_SlaveNAK;
- break;
- }
- }
-
- TWI_StopTransmission();
- }
-
- return ErrorCode;
-}
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h deleted file mode 100644 index 92c7389a6..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.h +++ /dev/null @@ -1,304 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief TWI Peripheral Driver (AVR8)
- *
- * On-chip TWI driver for the 8-bit AVR microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the TWI driver
- * dispatch header located in LUFA/Drivers/Peripheral/TWI.h.
- */
-
-/** \ingroup Group_TWI
- * \defgroup Group_TWI_AVR8 TWI Peripheral Driver (AVR8)
- *
- * \section Sec_ModDescription Module Description
- * Master mode TWI driver for the 8-bit AVR microcontrollers which contain a hardware TWI module.
- *
- * \note This file should not be included directly. It is automatically included as needed by the TWI driver
- * dispatch header located in LUFA/Drivers/Peripheral/TWI.h.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * <b>Low Level API Example:</b>
- * \code
- * // Initialize the TWI driver before first use at 200KHz
- * TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 200000));
- *
- * // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
- * if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_WRITE, 10) == TWI_ERROR_NoError)
- * {
- * TWI_SendByte(0xDC);
- *
- * TWI_SendByte(0x01);
- * TWI_SendByte(0x02);
- * TWI_SendByte(0x03);
- *
- * // Must stop transmission afterwards to release the bus
- * TWI_StopTransmission();
- * }
- *
- * // Start a read session to device at address 0xA0, internal address 0xDC with a 10ms timeout
- * if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_WRITE, 10) == TWI_ERROR_NoError)
- * {
- * TWI_SendByte(0xDC);
- * TWI_StopTransmission();
- *
- * if (TWI_StartTransmission(0xA0 | TWI_ADDRESS_READ, 10) == TWI_ERROR_NoError)
- * {
- * uint8_t Byte1, Byte2, Byte3;
- *
- * // Read three bytes, acknowledge after the third byte is received
- * TWI_ReceiveByte(&Byte1, false);
- * TWI_ReceiveByte(&Byte2, false);
- * TWI_ReceiveByte(&Byte3, true);
- *
- * // Must stop transmission afterwards to release the bus
- * TWI_StopTransmission();
- * }
- * }
- * \endcode
- *
- * <b>High Level API Example:</b>
- * \code
- * // Initialize the TWI driver before first use at 200KHz
- * TWI_Init(TWI_BIT_PRESCALE_1, TWI_BITLENGTH_FROM_FREQ(1, 200000));
- *
- * // Start a write session to device at device address 0xA0, internal address 0xDC with a 10ms timeout
- * uint8_t InternalWriteAddress = 0xDC;
- * uint8_t WritePacket[3] = {0x01, 0x02, 0x03};
- *
- * TWI_WritePacket(0xA0, 10, &InternalWriteAddress, sizeof(InternalWriteAddress),
- * &WritePacket, sizeof(WritePacket);
- *
- * // Start a read session to device at address 0xA0, internal address 0xDC with a 10ms timeout
- * uint8_t InternalReadAddress = 0xDC;
- * uint8_t ReadPacket[3];
- *
- * TWI_ReadPacket(0xA0, 10, &InternalReadAddress, sizeof(InternalReadAddress),
- * &ReadPacket, sizeof(ReadPacket);
- * \endcode
- *
- * @{
- */
-
-#ifndef __TWI_AVR8_H__
-#define __TWI_AVR8_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
-
- #include <stdio.h>
- #include <util/twi.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_TWI_H) && !defined(__INCLUDE_FROM_TWI_C)
- #error Do not include this file directly. Include LUFA/Drivers/Peripheral/TWI.h instead.
- #endif
-
- #if !(defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || \
- defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB647__) || \
- defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__) || \
- defined(__AVR_ATmega32U6__))
- #error The TWI peripheral driver is not currently available for your selected microcontroller model.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** TWI slave device address mask for a read session. Mask with a slave device base address to obtain
- * the correct TWI bus address for the slave device when reading data from it.
- */
- #define TWI_ADDRESS_READ 0x01
-
- /** TWI slave device address mask for a write session. Mask with a slave device base address to obtain
- * the correct TWI bus address for the slave device when writing data to it.
- */
- #define TWI_ADDRESS_WRITE 0x00
-
- /** Mask to retrieve the base address for a TWI device, which can then be ORed with \ref TWI_ADDRESS_READ
- * or \ref TWI_ADDRESS_WRITE to obtain the device's read and write address respectively.
- */
- #define TWI_DEVICE_ADDRESS_MASK 0xFE
-
- /** Bit length prescaler for \ref TWI_Init(). This mask multiplies the TWI bit length prescaler by 1. */
- #define TWI_BIT_PRESCALE_1 ((0 << TWPS1) | (0 << TWPS0))
-
- /** Bit length prescaler for \ref TWI_Init(). This mask multiplies the TWI bit length prescaler by 4. */
- #define TWI_BIT_PRESCALE_4 ((0 << TWPS1) | (1 << TWPS0))
-
- /** Bit length prescaler for \ref TWI_Init(). This mask multiplies the TWI bit length prescaler by 16. */
- #define TWI_BIT_PRESCALE_16 ((1 << TWPS1) | (0 << TWPS0))
-
- /** Bit length prescaler for \ref TWI_Init(). This mask multiplies the TWI bit length prescaler by 64. */
- #define TWI_BIT_PRESCALE_64 ((1 << TWPS1) | (1 << TWPS0))
-
- /** Calculates the length of each bit on the TWI bus for a given target frequency. This may be used with
- * the \ref TWI_Init() function to convert a bus frequency to a number of clocks for the \c BitLength
- * parameter.
- *
- * \param[in] Prescale Prescaler set on the TWI bus.
- * \param[in] Frequency Desired TWI bus frequency in Hz.
- *
- * \return Bit length in clocks for the given TWI bus frequency at the given prescaler value.
- */
- #define TWI_BITLENGTH_FROM_FREQ(Prescale, Frequency) ((((F_CPU / (Prescale)) / (Frequency)) - 16) / 2)
-
- /* Enums: */
- /** Enum for the possible return codes of the TWI transfer start routine and other dependant TWI functions. */
- enum TWI_ErrorCodes_t
- {
- TWI_ERROR_NoError = 0, /**< Indicates that the command completed successfully. */
- TWI_ERROR_BusFault = 1, /**< A TWI bus fault occurred while attempting to capture the bus. */
- TWI_ERROR_BusCaptureTimeout = 2, /**< A timeout occurred whilst waiting for the bus to be ready. */
- TWI_ERROR_SlaveResponseTimeout = 3, /**< No ACK received at the nominated slave address within the timeout period. */
- TWI_ERROR_SlaveNotReady = 4, /**< Slave NAKed the TWI bus START condition. */
- TWI_ERROR_SlaveNAK = 5, /**< Slave NAKed whilst attempting to send data to the device. */
- };
-
- /* Inline Functions: */
- /** Initializes the TWI hardware into master mode, ready for data transmission and reception. This must be
- * before any other TWI operations.
- *
- * The generated SCL frequency will be according to the formula <pre>F_CPU / (16 + 2 * BitLength + 4 ^ Prescale)</pre>.
- *
- * \attention The value of the \c BitLength parameter should not be set below 10 or invalid bus conditions may
- * occur, as indicated in the AVR8 microcontroller datasheet.
- *
- * \param[in] Prescale Prescaler to use when determining the bus frequency, a \c TWI_BIT_PRESCALE_* value.
- * \param[in] BitLength Length of the bits sent on the bus.
- */
- static inline void TWI_Init(const uint8_t Prescale, const uint8_t BitLength) ATTR_ALWAYS_INLINE;
- static inline void TWI_Init(const uint8_t Prescale, const uint8_t BitLength)
- {
- TWCR |= (1 << TWEN);
- TWSR = Prescale;
- TWBR = BitLength;
- }
-
- /** Turns off the TWI driver hardware. If this is called, any further TWI operations will require a call to
- * \ref TWI_Init() before the TWI can be used again.
- */
- static inline void TWI_Disable(void) ATTR_ALWAYS_INLINE;
- static inline void TWI_Disable(void)
- {
- TWCR &= ~(1 << TWEN);
- }
-
- /** Sends a TWI STOP onto the TWI bus, terminating communication with the currently addressed device. */
- static inline void TWI_StopTransmission(void) ATTR_ALWAYS_INLINE;
- static inline void TWI_StopTransmission(void)
- {
- TWCR = ((1 << TWINT) | (1 << TWSTO) | (1 << TWEN));
- }
-
- /* Function Prototypes: */
- /** Begins a master mode TWI bus communication with the given slave device address.
- *
- * \param[in] SlaveAddress Address of the slave TWI device to communicate with.
- * \param[in] TimeoutMS Timeout period within which the slave must respond, in milliseconds.
- *
- * \return A value from the \ref TWI_ErrorCodes_t enum.
- */
- uint8_t TWI_StartTransmission(const uint8_t SlaveAddress,
- const uint8_t TimeoutMS);
-
- /** Sends a byte to the currently addressed device on the TWI bus.
- *
- * \param[in] Byte Byte to send to the currently addressed device
- *
- * \return Boolean \c true if the recipient ACKed the byte, \c false otherwise
- */
- bool TWI_SendByte(const uint8_t Byte);
-
- /** Receives a byte from the currently addressed device on the TWI bus.
- *
- * \param[in] Byte Location where the read byte is to be stored.
- * \param[in] LastByte Indicates if the byte should be ACKed if false, NAKed if true.
- *
- * \return Boolean \c true if the byte reception successfully completed, \c false otherwise.
- */
- bool TWI_ReceiveByte(uint8_t* const Byte,
- const bool LastByte) ATTR_NON_NULL_PTR_ARG(1);
-
- /** High level function to perform a complete packet transfer over the TWI bus to the specified
- * device.
- *
- * \param[in] SlaveAddress Base address of the TWI slave device to communicate with.
- * \param[in] TimeoutMS Timeout for bus capture and slave START ACK, in milliseconds.
- * \param[in] InternalAddress Pointer to a location where the internal slave read start address is stored.
- * \param[in] InternalAddressLen Size of the internal device address, in bytes.
- * \param[in] Buffer Pointer to a buffer where the read packet data is to be stored.
- * \param[in] Length Size of the packet to read, in bytes.
- *
- * \return A value from the \ref TWI_ErrorCodes_t enum.
- */
- uint8_t TWI_ReadPacket(const uint8_t SlaveAddress,
- const uint8_t TimeoutMS,
- const uint8_t* InternalAddress,
- uint8_t InternalAddressLen,
- uint8_t* Buffer,
- uint8_t Length) ATTR_NON_NULL_PTR_ARG(3);
-
- /** High level function to perform a complete packet transfer over the TWI bus from the specified
- * device.
- *
- * \param[in] SlaveAddress Base address of the TWI slave device to communicate with
- * \param[in] TimeoutMS Timeout for bus capture and slave START ACK, in milliseconds
- * \param[in] InternalAddress Pointer to a location where the internal slave write start address is stored
- * \param[in] InternalAddressLen Size of the internal device address, in bytes
- * \param[in] Buffer Pointer to a buffer where the packet data to send is stored
- * \param[in] Length Size of the packet to send, in bytes
- *
- * \return A value from the \ref TWI_ErrorCodes_t enum.
- */
- uint8_t TWI_WritePacket(const uint8_t SlaveAddress,
- const uint8_t TimeoutMS,
- const uint8_t* InternalAddress,
- uint8_t InternalAddressLen,
- const uint8_t* Buffer,
- uint8_t Length) ATTR_NON_NULL_PTR_ARG(3);
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/SPI.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/SPI.h deleted file mode 100644 index 1fab22b68..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/SPI.h +++ /dev/null @@ -1,76 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Hardware Serial Peripheral Interface driver.
- *
- * This file is the master dispatch header file for the device-specific SPI driver, for microcontrollers
- * containing a hardware SPI.
- *
- * User code should include this file, which will in turn include the correct SPI driver header file for the
- * currently selected architecture and microcontroller model.
- */
-
-/** \ingroup Group_PeripheralDrivers
- * \defgroup Group_SPI SPI Driver - LUFA/Drivers/Peripheral/SPI.h
- * \brief Hardware Serial Peripheral Interface driver.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Hardware SPI driver. This module provides an easy to use driver for the setup and transfer of data over
- * the selected architecture and microcontroller model's SPI port.
- *
- * \note The exact API for this driver may vary depending on the target used - see
- * individual target module documentation for the API specific to your target processor.
- */
-
-#ifndef __SPI_H__
-#define __SPI_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_SPI_H
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/SPI_AVR8.h"
- #elif (ARCH == ARCH_XMEGA)
- #include "XMEGA/SPI_XMEGA.h"
- #else
- #error The SPI peripheral driver is not currently available for your selected architecture.
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/Serial.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/Serial.h deleted file mode 100644 index 0db13ba47..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/Serial.h +++ /dev/null @@ -1,76 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Hardware Serial USART driver.
- *
- * This file is the master dispatch header file for the device-specific USART driver, for microcontrollers
- * containing a hardware USART.
- *
- * User code should include this file, which will in turn include the correct ADC driver header file for the
- * currently selected architecture and microcontroller model.
- */
-
-/** \ingroup Group_PeripheralDrivers
- * \defgroup Group_Serial Serial USART Driver - LUFA/Drivers/Peripheral/Serial.h
- * \brief Hardware Serial USART driver.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/Peripheral/<i>ARCH</i>/Serial_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_SERIAL)</i>
- *
- * \section Sec_ModDescription Module Description
- * Hardware serial USART driver. This module provides an easy to use driver for the setup and transfer
- * of data over the selected architecture and microcontroller model's USART port.
- *
- * \note The exact API for this driver may vary depending on the target used - see
- * individual target module documentation for the API specific to your target processor.
- */
-
-#ifndef __SERIAL_H__
-#define __SERIAL_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_SERIAL_H
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/Serial_AVR8.h"
- #elif (ARCH == ARCH_XMEGA)
- #include "XMEGA/Serial_XMEGA.h"
- #else
- #error The Serial peripheral driver is not currently available for your selected architecture.
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/SerialSPI.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/SerialSPI.h deleted file mode 100644 index f5eede842..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/SerialSPI.h +++ /dev/null @@ -1,76 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Hardware SPI Master Mode Serial USART driver.
- *
- * This file is the master dispatch header file for the device-specific SPI Master Mode USART driver, for
- * microcontrollers containing a hardware USART capable of operating in a Master SPI mode.
- *
- * User code should include this file, which will in turn include the correct ADC driver header file for the
- * currently selected architecture and microcontroller model.
- */
-
-/** \ingroup Group_PeripheralDrivers
- * \defgroup Group_SerialSPI Master SPI Mode Serial USART Driver - LUFA/Drivers/Peripheral/SerialSPI.h
- * \brief Hardware SPI Master Mode Serial USART driver.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Hardware SPI Master Mode serial USART driver. This module provides an easy to use driver for the setup and transfer
- * of data over the selected architecture and microcontroller model's USART port, using a SPI framing format.
- *
- * \note The exact API for this driver may vary depending on the target used - see
- * individual target module documentation for the API specific to your target processor.
- */
-
-#ifndef __SERIAL_SPI_H__
-#define __SERIAL_SPI_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_SERIAL_SPI_H
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/SerialSPI_AVR8.h"
- #elif (ARCH == ARCH_XMEGA)
- #include "XMEGA/SerialSPI_XMEGA.h"
- #else
- #error The Serial SPI Master Mode peripheral driver is not currently available for your selected architecture.
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/TWI.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/TWI.h deleted file mode 100644 index 34012fda6..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/TWI.h +++ /dev/null @@ -1,74 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Hardware Two Wire Interface (I2C) driver.
- *
- * This file is the master dispatch header file for the device-specific SPI driver, for microcontrollers
- * containing a hardware TWI.
- *
- * User code should include this file, which will in turn include the correct TWI driver header file for the
- * currently selected architecture and microcontroller model.
- */
-
-/** \ingroup Group_PeripheralDrivers
- * \defgroup Group_TWI TWI Driver - LUFA/Drivers/Peripheral/TWI.h
- * \brief Hardware Two Wire Interface (I2C) driver.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/Peripheral/<i>ARCH</i>/TWI_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_TWI)</i>
- *
- * \section Sec_ModDescription Module Description
- * Hardware TWI driver. This module provides an easy to use driver for the setup and transfer of data over
- * the selected architecture and microcontroller model's TWI bus port.
- *
- * \note The exact API for this driver may vary depending on the target used - see
- * individual target module documentation for the API specific to your target processor.
- */
-
-#ifndef __TWI_H__
-#define __TWI_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_TWI_H
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/TWI_AVR8.h"
- #else
- #error The TWI peripheral driver is not currently available for your selected architecture.
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h deleted file mode 100644 index 25fb73d16..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/SPI_XMEGA.h +++ /dev/null @@ -1,248 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief SPI Peripheral Driver (XMEGA)
- *
- * On-chip SPI driver for the XMEGA microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the SPI driver
- * dispatch header located in LUFA/Drivers/Peripheral/SPI.h.
- */
-
-/** \ingroup Group_SPI
- * \defgroup Group_SPI_XMEGA SPI Peripheral Driver (XMEGA)
- *
- * \section Sec_ModDescription Module Description
- * Driver for the hardware SPI port(s) available on XMEGA AVR microcontroller models. This
- * module provides an easy to use driver for the setup and transfer of data over the AVR's
- * SPI ports.
- *
- * \note This file should not be included directly. It is automatically included as needed by the SPI driver
- * dispatch header located in LUFA/Drivers/Peripheral/SPI.h.
- *
- * \code
- * // Initialize the SPI driver before first use
- * SPI_Init(&SPIC,
- * SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
- * SPI_SAMPLE_TRAILING | SPI_MODE_MASTER);
- *
- * // Send several bytes, ignoring the returned data
- * SPI_SendByte(&SPIC, 0x01);
- * SPI_SendByte(&SPIC, 0x02);
- * SPI_SendByte(&SPIC, 0x03);
- *
- * // Receive several bytes, sending a dummy 0x00 byte each time
- * uint8_t Byte1 = SPI_ReceiveByte(&SPIC);
- * uint8_t Byte2 = SPI_ReceiveByte(&SPIC);
- * uint8_t Byte3 = SPI_ReceiveByte(&SPIC);
- *
- * // Send a byte, and store the received byte from the same transaction
- * uint8_t ResponseByte = SPI_TransferByte(&SPIC, 0xDC);
- * \endcode
- *
- * @{
- */
-
-#ifndef __SPI_XMEGA_H__
-#define __SPI_XMEGA_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_SPI_H)
- #error Do not include this file directly. Include LUFA/Drivers/Peripheral/SPI.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define SPI_USE_DOUBLESPEED SPI_CLK2X_bm
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name SPI Prescaler Configuration Masks */
- //@{
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 2. */
- #define SPI_SPEED_FCPU_DIV_2 SPI_USE_DOUBLESPEED
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 4. */
- #define SPI_SPEED_FCPU_DIV_4 0
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 8. */
- #define SPI_SPEED_FCPU_DIV_8 (SPI_USE_DOUBLESPEED | (1 << SPI_PRESCALER_gp))
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 16. */
- #define SPI_SPEED_FCPU_DIV_16 (1 << SPI_PRESCALER_gp)
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 32. */
- #define SPI_SPEED_FCPU_DIV_32 (SPI_USE_DOUBLESPEED | (2 << SPI_PRESCALER_gp))
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 64. */
- #define SPI_SPEED_FCPU_DIV_64 (2 << SPI_PRESCALER_gp)
-
- /** SPI prescaler mask for \ref SPI_Init(). Divides the system clock by a factor of 128. */
- #define SPI_SPEED_FCPU_DIV_128 (3 << SPI_PRESCALER_gp)
- //@}
-
- /** \name SPI SCK Polarity Configuration Masks */
- //@{
- /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the rising edge. */
- #define SPI_SCK_LEAD_RISING 0
-
- /** SPI clock polarity mask for \ref SPI_Init(). Indicates that the SCK should lead on the falling edge. */
- #define SPI_SCK_LEAD_FALLING SPI_MODE1_bm
- //@}
-
- /** \name SPI Sample Edge Configuration Masks */
- //@{
- /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should sampled on the leading edge. */
- #define SPI_SAMPLE_LEADING 0
-
- /** SPI data sample mode mask for \ref SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
- #define SPI_SAMPLE_TRAILING SPI_MODE0_bm
- //@}
-
- /** \name SPI Data Ordering Configuration Masks */
- //@{
- /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out MSB first. */
- #define SPI_ORDER_MSB_FIRST 0
-
- /** SPI data order mask for \ref SPI_Init(). Indicates that data should be shifted out LSB first. */
- #define SPI_ORDER_LSB_FIRST SPI_DORD_bm
- //@}
-
- /** \name SPI Mode Configuration Masks */
- //@{
- /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
- #define SPI_MODE_SLAVE 0
-
- /** SPI mode mask for \ref SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
- #define SPI_MODE_MASTER SPI_MASTER_bm
- //@}
-
- /* Inline Functions: */
- /** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
- * SPI routines.
- *
- * \param[in,out] SPI Pointer to the base of the SPI peripheral within the device.
- * \param[in] SPIOptions SPI Options, a mask consisting of one of each of the \c SPI_SPEED_*,
- * \c SPI_SCK_*, \c SPI_SAMPLE_*, \c SPI_ORDER_* and \c SPI_MODE_* masks.
- */
- static inline void SPI_Init(SPI_t* const SPI,
- const uint8_t SPIOptions)
- {
- SPI->CTRL = (SPIOptions | SPI_ENABLE_bm);
- }
-
- /** Turns off the SPI driver, disabling and returning used hardware to their default configuration.
- *
- * \param[in,out] SPI Pointer to the base of the SPI peripheral within the device.
- */
- static inline void SPI_Disable(SPI_t* const SPI)
- {
- SPI->CTRL &= ~SPI_ENABLE_bm;
- }
-
- /** Retrieves the currently selected SPI mode, once the SPI interface has been configured.
- *
- * \param[in,out] SPI Pointer to the base of the SPI peripheral within the device.
- *
- * \return \ref SPI_MODE_MASTER if the interface is currently in SPI Master mode, \ref SPI_MODE_SLAVE otherwise
- */
- static inline uint8_t SPI_GetCurrentMode(SPI_t* const SPI) ATTR_ALWAYS_INLINE;
- static inline uint8_t SPI_GetCurrentMode(SPI_t* const SPI)
- {
- return (SPI->CTRL & SPI_MASTER_bm);
- }
-
- /** Sends and receives a byte through the SPI interface, blocking until the transfer is complete.
- *
- * \param[in,out] SPI Pointer to the base of the SPI peripheral within the device.
- * \param[in] Byte Byte to send through the SPI interface.
- *
- * \return Response byte from the attached SPI device.
- */
- static inline uint8_t SPI_TransferByte(SPI_t* const SPI,
- const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline uint8_t SPI_TransferByte(SPI_t* const SPI,
- const uint8_t Byte)
- {
- SPI->DATA = Byte;
- while (!(SPI->STATUS & SPI_IF_bm));
- return SPI->DATA;
- }
-
- /** Sends a byte through the SPI interface, blocking until the transfer is complete. The response
- * byte sent to from the attached SPI device is ignored.
- *
- * \param[in,out] SPI Pointer to the base of the SPI peripheral within the device.
- * \param[in] Byte Byte to send through the SPI interface.
- */
- static inline void SPI_SendByte(SPI_t* const SPI,
- const uint8_t Byte) ATTR_ALWAYS_INLINE;
- static inline void SPI_SendByte(SPI_t* const SPI,
- const uint8_t Byte)
- {
- SPI->DATA = Byte;
- while (!(SPI->STATUS & SPI_IF_bm));
- }
-
- /** Sends a dummy byte through the SPI interface, blocking until the transfer is complete. The response
- * byte from the attached SPI device is returned.
- *
- * \param[in,out] SPI Pointer to the base of the SPI peripheral within the device.
- *
- * \return The response byte from the attached SPI device.
- */
- static inline uint8_t SPI_ReceiveByte(SPI_t* const SPI) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t SPI_ReceiveByte(SPI_t* const SPI)
- {
- SPI->DATA = 0;
- while (!(SPI->STATUS & SPI_IF_bm));
- return SPI->DATA;
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h deleted file mode 100644 index 6d0ea1115..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/SerialSPI_XMEGA.h +++ /dev/null @@ -1,203 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master SPI Mode Serial USART Peripheral Driver (XMEGA)
- *
- * On-chip Master SPI mode USART driver for the XMEGA AVR microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the SPI Master
- * Mode USART driver dispatch header located in LUFA/Drivers/Peripheral/Serial.h.
- */
-
-/** \ingroup Group_SerialSPI
- * \defgroup Group_SerialSPI_XMEGA Master SPI Mode Serial USART Peripheral Driver (XMEGA)
- *
- * \section Sec_ModDescription Module Description
- * On-chip serial USART driver for the XMEGA AVR microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the ADC driver
- * dispatch header located in LUFA/Drivers/Peripheral/SerialSPI.h.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the Master SPI mode USART driver before first use, with 1Mbit baud
- * SerialSPI_Init(&USARTD0, (USART_SPI_SCK_LEAD_RISING | USART_SPI_SAMPLE_LEADING | USART_SPI_ORDER_MSB_FIRST), 1000000);
- *
- * // Send several bytes, ignoring the returned data
- * SerialSPI_SendByte(&USARTD0, 0x01);
- * SerialSPI_SendByte(&USARTD0, 0x02);
- * SerialSPI_SendByte(&USARTD0, 0x03);
- *
- * // Receive several bytes, sending a dummy 0x00 byte each time
- * uint8_t Byte1 = SerialSPI_ReceiveByte(&USARTD);
- * uint8_t Byte2 = SerialSPI_ReceiveByte(&USARTD);
- * uint8_t Byte3 = SerialSPI_ReceiveByte(&USARTD);
- *
- * // Send a byte, and store the received byte from the same transaction
- * uint8_t ResponseByte = SerialSPI_TransferByte(&USARTD0, 0xDC);
- * \endcode
- *
- * @{
- */
-
-#ifndef __SERIAL_SPI_XMEGA_H__
-#define __SERIAL_SPI_XMEGA_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
-
- #include <stdio.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_SERIAL_SPI_H)
- #error Do not include this file directly. Include LUFA/Drivers/Peripheral/Serial.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- #define SERIAL_SPI_UBBRVAL(Baud) ((Baud < (F_CPU / 2)) ? ((F_CPU / (2 * Baud)) - 1) : 0)
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name SPI SCK Polarity Configuration Masks */
- //@{
- /** SPI clock polarity mask for \ref SerialSPI_Init(). Indicates that the SCK should lead on the rising edge. */
- #define USART_SPI_SCK_LEAD_RISING 0
- //@}
-
- /** \name SPI Sample Edge Configuration Masks */
- //@{
- /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should sampled on the leading edge. */
- #define USART_SPI_SAMPLE_LEADING 0
-
- /** SPI data sample mode mask for \ref SerialSPI_Init(). Indicates that the data should be sampled on the trailing edge. */
- #define USART_SPI_SAMPLE_TRAILING USART_UPCHA_bm
- //@}
-
- /** \name SPI Data Ordering Configuration Masks */
- //@{
- /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out MSB first. */
- #define USART_SPI_ORDER_MSB_FIRST 0
-
- /** SPI data order mask for \ref SerialSPI_Init(). Indicates that data should be shifted out LSB first. */
- #define USART_SPI_ORDER_LSB_FIRST USART_UDORD_bm
- //@}
-
- /* Inline Functions: */
- /** Initialize the USART module in Master SPI mode.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- * \param[in] SPIOptions USART SPI Options, a mask consisting of one of each of the \c USART_SPI_SCK_*,
- * \c USART_SPI_SAMPLE_* and \c USART_SPI_ORDER_* masks.
- * \param[in] BaudRate SPI baud rate, in bits per second.
- */
- static inline void SerialSPI_Init(USART_t* const USART,
- const uint8_t SPIOptions,
- const uint32_t BaudRate)
- {
- uint16_t BaudValue = SERIAL_SPI_UBBRVAL(BaudRate);
-
- USART->BAUDCTRLB = (BaudValue >> 8);
- USART->BAUDCTRLA = (BaudValue & 0xFF);
-
- USART->CTRLC = (USART_CMODE_MSPI_gc | SPIOptions);
- USART->CTRLB = (USART_RXEN_bm | USART_TXEN_bm);
- }
-
- /** Turns off the USART driver, disabling and returning used hardware to their default configuration.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- */
- static inline void SerialSPI_Disable(USART_t* const USART)
- {
- USART->CTRLA = 0;
- USART->CTRLB = 0;
- USART->CTRLC = 0;
- }
-
- /** Sends and receives a byte through the USART SPI interface, blocking until the transfer is complete.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- * \param[in] DataByte Byte to send through the USART SPI interface.
- *
- * \return Response byte from the attached SPI device.
- */
- static inline uint8_t SerialSPI_TransferByte(USART_t* const USART,
- const uint8_t DataByte)
- {
- USART->DATA = DataByte;
- while (!(USART->STATUS & USART_TXCIF_bm));
- USART->STATUS = USART_TXCIF_bm;
- return USART->DATA;
- }
-
- /** Sends a byte through the USART SPI interface, blocking until the transfer is complete. The response
- * byte sent to from the attached SPI device is ignored.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- * \param[in] DataByte Byte to send through the USART SPI interface.
- */
- static inline void SerialSPI_SendByte(USART_t* const USART,
- const uint8_t DataByte)
- {
- SerialSPI_TransferByte(USART, DataByte);
- }
-
- /** Sends a dummy byte through the USART SPI interface, blocking until the transfer is complete. The response
- * byte from the attached SPI device is returned.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- *
- * \return The response byte from the attached SPI device.
- */
- static inline uint8_t SerialSPI_ReceiveByte(USART_t* const USART)
- {
- return SerialSPI_TransferByte(USART, 0);
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.c deleted file mode 100644 index 51a4d049e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.c +++ /dev/null @@ -1,122 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../Common/Common.h"
-#if (ARCH == ARCH_XMEGA)
-
-#define __INCLUDE_FROM_SERIAL_C
-#include "../Serial.h"
-
-FILE USARTSerialStream;
-
-int Serial_putchar(char DataByte,
- FILE *Stream)
-{
- USART_t* USART = fdev_get_udata(Stream);
-
- Serial_SendByte(USART, DataByte);
- return 0;
-}
-
-int Serial_getchar(FILE *Stream)
-{
- USART_t* USART = fdev_get_udata(Stream);
-
- if (!(Serial_IsCharReceived(USART)))
- return _FDEV_EOF;
-
- return Serial_ReceiveByte(USART);
-}
-
-int Serial_getchar_Blocking(FILE *Stream)
-{
- USART_t* USART = fdev_get_udata(Stream);
-
- while (!(Serial_IsCharReceived(USART)));
- return Serial_ReceiveByte(USART);
-}
-
-void Serial_SendString_P(USART_t* const USART,
- const char* FlashStringPtr)
-{
- uint8_t CurrByte;
-
- while ((CurrByte = pgm_read_byte(FlashStringPtr)) != 0x00)
- {
- Serial_SendByte(USART, CurrByte);
- FlashStringPtr++;
- }
-}
-
-void Serial_SendString(USART_t* const USART,
- const char* StringPtr)
-{
- uint8_t CurrByte;
-
- while ((CurrByte = *StringPtr) != 0x00)
- {
- Serial_SendByte(USART, CurrByte);
- StringPtr++;
- }
-}
-
-void Serial_SendData(USART_t* const USART,
- const uint8_t* Buffer,
- uint16_t Length)
-{
- while (Length--)
- Serial_SendByte(USART, *(Buffer++));
-}
-
-void Serial_CreateStream(FILE* Stream)
-{
- if (!(Stream))
- {
- Stream = &USARTSerialStream;
- stdin = Stream;
- stdout = Stream;
- }
-
- *Stream = (FILE)FDEV_SETUP_STREAM(Serial_putchar, Serial_getchar, _FDEV_SETUP_RW);
-}
-
-void Serial_CreateBlockingStream(FILE* Stream)
-{
- if (!(Stream))
- {
- Stream = &USARTSerialStream;
- stdin = Stream;
- stdout = Stream;
- }
-
- *Stream = (FILE)FDEV_SETUP_STREAM(Serial_putchar, Serial_getchar_Blocking, _FDEV_SETUP_RW);
-}
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h deleted file mode 100644 index 35b60d150..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/Peripheral/XMEGA/Serial_XMEGA.h +++ /dev/null @@ -1,252 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Serial USART Peripheral Driver (XMEGA)
- *
- * On-chip serial USART driver for the XMEGA AVR microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USART driver
- * dispatch header located in LUFA/Drivers/Peripheral/Serial.h.
- */
-
-/** \ingroup Group_Serial
- * \defgroup Group_Serial_XMEGA Serial USART Peripheral Driver (XMEGA)
- *
- * \section Sec_ModDescription Module Description
- * On-chip serial USART driver for the XMEGA AVR microcontrollers.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USART driver
- * dispatch header located in LUFA/Drivers/Peripheral/Serial.h.
- *
- * \section Sec_ExampleUsage Example Usage
- * The following snippet is an example of how this module may be used within a typical
- * application.
- *
- * \code
- * // Initialize the serial USART driver before first use, with 9600 baud (and no double-speed mode)
- * Serial_Init(&USARTD0, 9600, false);
- *
- * // Send a string through the USART
- * Serial_TxString(&USARTD0, "Test String\r\n");
- *
- * // Receive a byte through the USART
- * uint8_t DataByte = Serial_RxByte(&USARTD0);
- * \endcode
- *
- * @{
- */
-
-#ifndef __SERIAL_XMEGA_H__
-#define __SERIAL_XMEGA_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "../../Misc/TerminalCodes.h"
-
- #include <stdio.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_SERIAL_H) && !defined(__INCLUDE_FROM_SERIAL_C)
- #error Do not include this file directly. Include LUFA/Drivers/Peripheral/Serial.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* External Variables: */
- extern FILE USARTSerialStream;
-
- /* Function Prototypes: */
- int Serial_putchar(char DataByte,
- FILE *Stream);
- int Serial_getchar(FILE *Stream);
- int Serial_getchar_Blocking(FILE *Stream);
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Macro for calculating the baud value from a given baud rate when the \c U2X (double speed) bit is
- * not set.
- *
- * \param[in] Baud Target serial UART baud rate.
- *
- * \return Closest UBRR register value for the given UART frequency.
- */
- #define SERIAL_UBBRVAL(Baud) ((((F_CPU / 16) + (Baud / 2)) / (Baud)) - 1)
-
- /** Macro for calculating the baud value from a given baud rate when the \c U2X (double speed) bit is
- * set.
- *
- * \param[in] Baud Target serial UART baud rate.
- *
- * \return Closest UBRR register value for the given UART frequency.
- */
- #define SERIAL_2X_UBBRVAL(Baud) ((((F_CPU / 8) + (Baud / 2)) / (Baud)) - 1)
-
- /* Function Prototypes: */
- /** Transmits a given string located in program space (FLASH) through the USART.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- * \param[in] FlashStringPtr Pointer to a string located in program space.
- */
- void Serial_SendString_P(USART_t* const USART,
- const char* FlashStringPtr) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Transmits a given string located in SRAM memory through the USART.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- * \param[in] StringPtr Pointer to a string located in SRAM space.
- */
- void Serial_SendString(USART_t* const USART,
- const char* StringPtr) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Transmits a given buffer located in SRAM memory through the USART.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- * \param[in] Buffer Pointer to a buffer containing the data to send.
- * \param[in] Length Length of the data to send, in bytes.
- */
- void Serial_SendData(USART_t* const USART,
- const uint8_t* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Creates a standard character stream from the USART so that it can be used with all the regular functions
- * in the avr-libc \c <stdio.h> library that accept a \c FILE stream as a destination (e.g. \c fprintf). The created
- * stream is bidirectional and can be used for both input and output functions.
- *
- * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single
- * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may
- * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own
- * line buffering.
- *
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed, if \c NULL, \c stdout
- * and \c stdin will be configured to use the USART.
- *
- * \pre The USART must first be configured via a call to \ref Serial_Init() before the stream is used.
- */
- void Serial_CreateStream(FILE* Stream);
-
- /** Identical to \ref Serial_CreateStream(), except that reads are blocking until the calling stream function terminates
- * the transfer.
- *
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed, if \c NULL, \c stdout
- * and \c stdin will be configured to use the USART.
- *
- * \pre The USART must first be configured via a call to \ref Serial_Init() before the stream is used.
- */
- void Serial_CreateBlockingStream(FILE* Stream);
-
- /* Inline Functions: */
- /** Initializes the USART, ready for serial data transmission and reception. This initializes the interface to
- * standard 8-bit, no parity, 1 stop bit settings suitable for most applications.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- * \param[in] BaudRate Serial baud rate, in bits per second.
- * \param[in] DoubleSpeed Enables double speed mode when set, halving the sample time to double the baud rate.
- */
- static inline void Serial_Init(USART_t* const USART,
- const uint32_t BaudRate,
- const bool DoubleSpeed)
- {
- uint16_t BaudValue = (DoubleSpeed ? SERIAL_2X_UBBRVAL(BaudRate) : SERIAL_UBBRVAL(BaudRate));
-
- USART->BAUDCTRLB = (BaudValue >> 8);
- USART->BAUDCTRLA = (BaudValue & 0xFF);
-
- USART->CTRLC = (USART_CMODE_ASYNCHRONOUS_gc | USART_PMODE_DISABLED_gc | USART_CHSIZE_8BIT_gc);
- USART->CTRLB = (USART_RXEN_bm | USART_TXEN_bm | (DoubleSpeed ? USART_CLK2X_bm : 0));
- }
-
- /** Turns off the USART driver, disabling and returning used hardware to their default configuration.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- */
- static inline void Serial_Disable(USART_t* const USART)
- {
- USART->CTRLA = 0;
- USART->CTRLB = 0;
- USART->CTRLC = 0;
- }
-
- /** Indicates whether a character has been received through the USART.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- *
- * \return Boolean \c true if a character has been received, \c false otherwise.
- */
- static inline bool Serial_IsCharReceived(USART_t* const USART) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Serial_IsCharReceived(USART_t* const USART)
- {
- return ((USART->STATUS & USART_RXCIF_bm) ? true : false);
- }
-
- /** Transmits a given byte through the USART.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- * \param[in] DataByte Byte to transmit through the USART.
- */
- static inline void Serial_SendByte(USART_t* const USART,
- const char DataByte) ATTR_ALWAYS_INLINE;
- static inline void Serial_SendByte(USART_t* const USART,
- const char DataByte)
- {
- while (!(USART->STATUS & USART_DREIF_bm));
- USART->DATA = DataByte;
- }
-
- /** Receives the next byte from the USART.
- *
- * \param[in,out] USART Pointer to the base of the USART peripheral within the device.
- *
- * \return Next byte received from the USART, or a negative value if no byte has been received.
- */
- static inline int16_t Serial_ReceiveByte(USART_t* const USART) ATTR_ALWAYS_INLINE;
- static inline int16_t Serial_ReceiveByte(USART_t* const USART)
- {
- if (!(Serial_IsCharReceived(USART)))
- return -1;
-
- USART->STATUS = USART_RXCIF_bm;
- return USART->DATA;
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/AndroidAccessoryClass.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/AndroidAccessoryClass.h deleted file mode 100644 index 2f2fa5bc7..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/AndroidAccessoryClass.h +++ /dev/null @@ -1,76 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the library USB Android Open Accessory Class driver.
- *
- * Master include file for the library USB Android Open Accessory Class driver, for both host and device modes, where available.
- *
- * This file should be included in all user projects making use of this optional class driver, instead of
- * including any headers in the USB/ClassDriver/Device, USB/ClassDriver/Host or USB/ClassDriver/Common subdirectories.
- */
-
-/** \ingroup Group_USBClassDrivers
- * \defgroup Group_USBClassAOA Android Open Accessory Class Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Android Open Accessory Class Driver module. This module contains an internal implementation of the USB Android Open Accessory
- * Class, for Host USB mode. User applications can use this class driver instead of implementing the Android Open Accessory Class
- * manually via the low-level LUFA APIs.
- *
- * This module is designed to simplify the user code by exposing only the required interface needed to interface with
- * Host using the USB Android Open Accessory Class.
- *
- * @{
- */
-
-#ifndef _AOA_CLASS_H_
-#define _AOA_CLASS_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_USB_DRIVER
- #define __INCLUDE_FROM_AOA_DRIVER
-
- /* Includes: */
- #include "../Core/USBMode.h"
-
- #if defined(USB_CAN_BE_HOST)
- #include "Host/AndroidAccessoryClassHost.h"
- #endif
-
-#endif
-
-/** @} */
-
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/AudioClass.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/AudioClass.h deleted file mode 100644 index 91aa22f3b..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/AudioClass.h +++ /dev/null @@ -1,80 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the library USB Audio 1.0 Class driver.
- *
- * Master include file for the library USB Audio 1.0 Class driver, for both host and device modes, where available.
- *
- * This file should be included in all user projects making use of this optional class driver, instead of
- * including any headers in the USB/ClassDriver/Device, USB/ClassDriver/Host or USB/ClassDriver/Common subdirectories.
- */
-
-/** \ingroup Group_USBClassDrivers
- * \defgroup Group_USBClassAudio Audio 1.0 Class Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/AudioClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- * - LUFA/Drivers/USB/Class/Host/AudioClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Audio 1.0 Class Driver module. This module contains an internal implementation of the USB Audio 1.0 Class, for both
- * Device and Host USB modes. User applications can use this class driver instead of implementing the Audio 1.0 class
- * manually via the low-level LUFA APIs.
- *
- * This module is designed to simplify the user code by exposing only the required interface needed to interface with
- * Hosts or Devices using the USB Audio 1.0 Class.
- *
- * @{
- */
-
-#ifndef _AUDIO_CLASS_H_
-#define _AUDIO_CLASS_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_USB_DRIVER
- #define __INCLUDE_FROM_AUDIO_DRIVER
-
- /* Includes: */
- #include "../Core/USBMode.h"
-
- #if defined(USB_CAN_BE_DEVICE)
- #include "Device/AudioClassDevice.h"
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- #include "Host/AudioClassHost.h"
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/CDCClass.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/CDCClass.h deleted file mode 100644 index 6bfd38488..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/CDCClass.h +++ /dev/null @@ -1,80 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the library USB CDC-ACM Class driver.
- *
- * Master include file for the library USB CDC Class driver, for both host and device modes, where available.
- *
- * This file should be included in all user projects making use of this optional class driver, instead of
- * including any headers in the USB/ClassDriver/Device, USB/ClassDriver/Host or USB/ClassDriver/Common subdirectories.
- */
-
-/** \ingroup Group_USBClassDrivers
- * \defgroup Group_USBClassCDC CDC-ACM (Virtual Serial) Class Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/CDCClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- * - LUFA/Drivers/USB/Class/Host/CDCClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * CDC Class Driver module. This module contains an internal implementation of the USB CDC-ACM class Virtual Serial
- * Ports, for both Device and Host USB modes. User applications can use this class driver instead of implementing the
- * CDC class manually via the low-level LUFA APIs.
- *
- * This module is designed to simplify the user code by exposing only the required interface needed to interface with
- * Hosts or Devices using the USB CDC Class.
- *
- * @{
- */
-
-#ifndef _CDC_CLASS_H_
-#define _CDC_CLASS_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_USB_DRIVER
- #define __INCLUDE_FROM_CDC_DRIVER
-
- /* Includes: */
- #include "../Core/USBMode.h"
-
- #if defined(USB_CAN_BE_DEVICE)
- #include "Device/CDCClassDevice.h"
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- #include "Host/CDCClassHost.h"
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/AndroidAccessoryClassCommon.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/AndroidAccessoryClassCommon.h deleted file mode 100644 index db97f4888..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/AndroidAccessoryClassCommon.h +++ /dev/null @@ -1,128 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common definitions and declarations for the library USB Android Open Accessory Class driver.
- *
- * Common definitions and declarations for the library USB Android Open Accessory Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassAOA
- * \defgroup Group_USBClassAOACommon Common Class Definitions
- *
- * \section Sec_ModDescription Module Description
- * Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
- * Android Open Accessory Class.
- *
- * @{
- */
-
-#ifndef _AOA_CLASS_COMMON_H_
-#define _AOA_CLASS_COMMON_H_
-
- /* Includes: */
- #include "../../Core/StdDescriptors.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_AOA_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Macros: */
- /** Product ID value in a Device Descriptor to indicate an Android device in Open Accessory mode. */
- #define ANDROID_ACCESSORY_PRODUCT_ID 0x2D00
-
- /** Product ID value in a Device Descriptor to indicate an Android device in Open Accessory and Android Debug mode. */
- #define ANDROID_ACCESSORY_ADB_PRODUCT_ID 0x2D01
-
- /* Enums: */
- /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the
- * Android Open Accessory class.
- */
- enum AOA_Descriptor_ClassSubclassProtocol_t
- {
- AOA_CSCP_AOADataClass = 0xFF, /**< Descriptor Class value indicating that the device or interface
- * belongs to the AOA data class.
- */
- AOA_CSCP_AOADataSubclass = 0xFF, /**< Descriptor Subclass value indicating that the device or interface
- * belongs to AOA data subclass.
- */
- AOA_CSCP_AOADataProtocol = 0x00, /**< Descriptor Protocol value indicating that the device or interface
- * belongs to the AOA data class protocol.
- */
- };
-
- /** Enum for the Android Open Accessory class specific control requests that can be issued by the USB bus host. */
- enum AOA_ClassRequests_t
- {
- AOA_REQ_GetAccessoryProtocol = 0x33, /**< Android Open Accessory control request to retrieve the device's supported Accessory Protocol version. */
- AOA_REQ_SendString = 0x34, /**< Android Open Accessory control request to set an accessory property string in the device. */
- AOA_REQ_StartAccessoryMode = 0x35, /**< Android Open Accessory control request to switch the device into Accessory mode. */
- };
-
- /** Enum for the possible Android Open Accessory property string indexes. */
- enum AOA_Strings_t
- {
- AOA_STRING_Manufacturer = 0, /**< Index of the Manufacturer property string. */
- AOA_STRING_Model = 1, /**< Index of the Model Name property string. */
- AOA_STRING_Description = 2, /**< Index of the Description property string. */
- AOA_STRING_Version = 3, /**< Index of the Version Number property string. */
- AOA_STRING_URI = 4, /**< Index of the URI Information property string. */
- AOA_STRING_Serial = 5, /**< Index of the Serial Number property string. */
-
- #if !defined(__DOXYGEN__)
- AOA_STRING_TOTAL_STRINGS
- #endif
- };
-
- /** Enum for the possible Android Open Accessory protocol versions. */
- enum AOA_Protocols_t
- {
- AOA_PROTOCOL_AccessoryV1 = 0x0001, /**< Android Open Accessory version 1. */
- };
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/AudioClassCommon.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/AudioClassCommon.h deleted file mode 100644 index f33fef68a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/AudioClassCommon.h +++ /dev/null @@ -1,774 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common definitions and declarations for the library USB Audio 1.0 Class driver.
- *
- * Common definitions and declarations for the library USB Audio 1.0 Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassAudio
- * \defgroup Group_USBClassAudioCommon Common Class Definitions
- *
- * \section Sec_ModDescription Module Description
- * Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
- * Audio 1.0 Class.
- *
- * @{
- */
-
-#ifndef _AUDIO_CLASS_COMMON_H_
-#define _AUDIO_CLASS_COMMON_H_
-
- /* Includes: */
- #include "../../Core/StdDescriptors.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_AUDIO_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Macros: */
- /** \name Audio Channel Masks */
- //@{
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_LEFT_FRONT (1 << 0)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_RIGHT_FRONT (1 << 1)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_CENTER_FRONT (1 << 2)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_LOW_FREQ_ENHANCE (1 << 3)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_LEFT_SURROUND (1 << 4)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_RIGHT_SURROUND (1 << 5)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_LEFT_OF_CENTER (1 << 6)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_RIGHT_OF_CENTER (1 << 7)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_SURROUND (1 << 8)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_SIDE_LEFT (1 << 9)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_SIDE_RIGHT (1 << 10)
-
- /** Supported channel mask for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_CHANNEL_TOP (1 << 11)
- //@}
-
- /** \name Audio Feature Masks */
- //@{
- /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
- #define AUDIO_FEATURE_MUTE (1 << 0)
-
- /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
- #define AUDIO_FEATURE_VOLUME (1 << 1)
-
- /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
- #define AUDIO_FEATURE_BASS (1 << 2)
-
- /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
- #define AUDIO_FEATURE_MID (1 << 3)
-
- /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
- #define AUDIO_FEATURE_TREBLE (1 << 4)
-
- /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
- #define AUDIO_FEATURE_GRAPHIC_EQUALIZER (1 << 5)
-
- /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
- #define AUDIO_FEATURE_AUTOMATIC_GAIN (1 << 6)
-
- /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
- #define AUDIO_FEATURE_DELAY (1 << 7)
-
- /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
- #define AUDIO_FEATURE_BASS_BOOST (1 << 8)
-
- /** Supported feature mask for an Audio class feature unit descriptor. See the Audio class specification for more details. */
- #define AUDIO_FEATURE_BASS_LOUDNESS (1 << 9)
- //@}
-
- /** \name Audio Terminal Types */
- //@{
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_UNDEFINED 0x0100
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_STREAMING 0x0101
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_VENDOR 0x01FF
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_IN_UNDEFINED 0x0200
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_IN_MIC 0x0201
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_IN_DESKTOP_MIC 0x0202
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_IN_PERSONAL_MIC 0x0203
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_IN_OMNIDIR_MIC 0x0204
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_IN_MIC_ARRAY 0x0205
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_IN_PROCESSING_MIC 0x0206
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_IN_OUT_UNDEFINED 0x0300
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_OUT_SPEAKER 0x0301
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_OUT_HEADPHONES 0x0302
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_OUT_HEAD_MOUNTED 0x0303
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_OUT_DESKTOP 0x0304
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_OUT_ROOM 0x0305
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_OUT_COMMUNICATION 0x0306
-
- /** Terminal type constant for an Audio class terminal descriptor. See the Audio class specification for more details. */
- #define AUDIO_TERMINAL_OUT_LOWFREQ 0x0307
- //@}
-
- /** Convenience macro to fill a 24-bit \ref USB_Audio_SampleFreq_t structure with the given sample rate as a 24-bit number.
- *
- * \param[in] freq Required audio sampling frequency in HZ
- */
- #define AUDIO_SAMPLE_FREQ(freq) {.Byte1 = ((uint32_t)freq & 0xFF), .Byte2 = (((uint32_t)freq >> 8) & 0xFF), .Byte3 = (((uint32_t)freq >> 16) & 0xFF)}
-
- /** Mask for the attributes parameter of an Audio class-specific Endpoint descriptor, indicating that the endpoint
- * accepts only filled endpoint packets of audio samples.
- */
- #define AUDIO_EP_FULL_PACKETS_ONLY (1 << 7)
-
- /** Mask for the attributes parameter of an Audio class-specific Endpoint descriptor, indicating that the endpoint
- * will accept partially filled endpoint packets of audio samples.
- */
- #define AUDIO_EP_ACCEPTS_SMALL_PACKETS (0 << 7)
-
- /** Mask for the attributes parameter of an Audio class-specific Endpoint descriptor, indicating that the endpoint
- * allows for sampling frequency adjustments to be made via control requests directed at the endpoint.
- */
- #define AUDIO_EP_SAMPLE_FREQ_CONTROL (1 << 0)
-
- /** Mask for the attributes parameter of an Audio class-specific Endpoint descriptor, indicating that the endpoint
- * allows for pitch adjustments to be made via control requests directed at the endpoint.
- */
- #define AUDIO_EP_PITCH_CONTROL (1 << 1)
-
- /* Enums: */
- /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the Audio
- * device class.
- */
- enum Audio_Descriptor_ClassSubclassProtocol_t
- {
- AUDIO_CSCP_AudioClass = 0x01, /**< Descriptor Class value indicating that the device or
- * interface belongs to the USB Audio 1.0 class.
- */
- AUDIO_CSCP_ControlSubclass = 0x01, /**< Descriptor Subclass value indicating that the device or
- * interface belongs to the Audio Control subclass.
- */
- AUDIO_CSCP_ControlProtocol = 0x00, /**< Descriptor Protocol value indicating that the device or
- * interface belongs to the Audio Control protocol.
- */
- AUDIO_CSCP_AudioStreamingSubclass = 0x02, /**< Descriptor Subclass value indicating that the device or
- * interface belongs to the MIDI Streaming subclass.
- */
- AUDIO_CSCP_MIDIStreamingSubclass = 0x03, /**< Descriptor Subclass value indicating that the device or
- * interface belongs to the Audio streaming subclass.
- */
- AUDIO_CSCP_StreamingProtocol = 0x00, /**< Descriptor Protocol value indicating that the device or
- * interface belongs to the Streaming Audio protocol.
- */
- };
-
- /** Audio class specific interface description subtypes, for the Audio Control interface. */
- enum Audio_CSInterface_AC_SubTypes_t
- {
- AUDIO_DSUBTYPE_CSInterface_Header = 0x01, /**< Audio class specific control interface header. */
- AUDIO_DSUBTYPE_CSInterface_InputTerminal = 0x02, /**< Audio class specific control interface Input Terminal. */
- AUDIO_DSUBTYPE_CSInterface_OutputTerminal = 0x03, /**< Audio class specific control interface Output Terminal. */
- AUDIO_DSUBTYPE_CSInterface_Mixer = 0x04, /**< Audio class specific control interface Mixer Unit. */
- AUDIO_DSUBTYPE_CSInterface_Selector = 0x05, /**< Audio class specific control interface Selector Unit. */
- AUDIO_DSUBTYPE_CSInterface_Feature = 0x06, /**< Audio class specific control interface Feature Unit. */
- AUDIO_DSUBTYPE_CSInterface_Processing = 0x07, /**< Audio class specific control interface Processing Unit. */
- AUDIO_DSUBTYPE_CSInterface_Extension = 0x08, /**< Audio class specific control interface Extension Unit. */
- };
-
- /** Audio class specific interface description subtypes, for the Audio Streaming interface. */
- enum Audio_CSInterface_AS_SubTypes_t
- {
- AUDIO_DSUBTYPE_CSInterface_General = 0x01, /**< Audio class specific streaming interface general descriptor. */
- AUDIO_DSUBTYPE_CSInterface_FormatType = 0x02, /**< Audio class specific streaming interface format type descriptor. */
- AUDIO_DSUBTYPE_CSInterface_FormatSpecific = 0x03, /**< Audio class specific streaming interface format information descriptor. */
- };
-
- /** Audio class specific endpoint description subtypes, for the Audio Streaming interface. */
- enum Audio_CSEndpoint_SubTypes_t
- {
- AUDIO_DSUBTYPE_CSEndpoint_General = 0x01, /**< Audio class specific endpoint general descriptor. */
- };
-
- /** Enum for the Audio class specific control requests that can be issued by the USB bus host. */
- enum Audio_ClassRequests_t
- {
- AUDIO_REQ_SetCurrent = 0x01, /**< Audio class-specific request to set the current value of a parameter within the device. */
- AUDIO_REQ_SetMinimum = 0x02, /**< Audio class-specific request to set the minimum value of a parameter within the device. */
- AUDIO_REQ_SetMaximum = 0x03, /**< Audio class-specific request to set the maximum value of a parameter within the device. */
- AUDIO_REQ_SetResolution = 0x04, /**< Audio class-specific request to set the resolution value of a parameter within the device. */
- AUDIO_REQ_SetMemory = 0x05, /**< Audio class-specific request to set the memory value of a parameter within the device. */
- AUDIO_REQ_GetCurrent = 0x81, /**< Audio class-specific request to get the current value of a parameter within the device. */
- AUDIO_REQ_GetMinimum = 0x82, /**< Audio class-specific request to get the minimum value of a parameter within the device. */
- AUDIO_REQ_GetMaximum = 0x83, /**< Audio class-specific request to get the maximum value of a parameter within the device. */
- AUDIO_REQ_GetResolution = 0x84, /**< Audio class-specific request to get the resolution value of a parameter within the device. */
- AUDIO_REQ_GetMemory = 0x85, /**< Audio class-specific request to get the memory value of a parameter within the device. */
- AUDIO_REQ_GetStatus = 0xFF, /**< Audio class-specific request to get the device status. */
- };
-
- /** Enum for Audio class specific Endpoint control modifiers which can be set and retrieved by a USB host, if the corresponding
- * endpoint control is indicated to be supported in the Endpoint's Audio-class specific endpoint descriptor.
- */
- enum Audio_EndpointControls_t
- {
- AUDIO_EPCONTROL_SamplingFreq = 0x01, /**< Sampling frequency adjustment of the endpoint. */
- AUDIO_EPCONTROL_Pitch = 0x02, /**< Pitch adjustment of the endpoint. */
- };
-
- /* Type Defines: */
- /** \brief Audio class-specific Input Terminal Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific input terminal descriptor. This indicates to the host that the device
- * contains an input audio source, either from a physical terminal on the device, or a logical terminal (for example,
- * a USB endpoint). See the USB Audio specification for more details.
- *
- * \see \ref USB_Audio_StdDescriptor_InputTerminal_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * must be \ref AUDIO_DSUBTYPE_CSInterface_InputTerminal.
- */
-
- uint8_t TerminalID; /**< ID value of this terminal unit - must be a unique value within the device. */
- uint16_t TerminalType; /**< Type of terminal, a \c TERMINAL_* mask. */
- uint8_t AssociatedOutputTerminal; /**< ID of associated output terminal, for physically grouped terminals
- * such as the speaker and microphone of a phone handset.
- */
- uint8_t TotalChannels; /**< Total number of separate audio channels within this interface (right, left, etc.) */
- uint16_t ChannelConfig; /**< \c CHANNEL_* masks indicating what channel layout is supported by this terminal. */
-
- uint8_t ChannelStrIndex; /**< Index of a string descriptor describing this channel within the device. */
- uint8_t TerminalStrIndex; /**< Index of a string descriptor describing this descriptor within the device. */
- } ATTR_PACKED USB_Audio_Descriptor_InputTerminal_t;
-
- /** \brief Audio class-specific Input Terminal Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific input terminal descriptor. This indicates to the host that the device
- * contains an input audio source, either from a physical terminal on the device, or a logical terminal (for example,
- * a USB endpoint). See the USB Audio specification for more details.
- *
- * \see \ref USB_Audio_Descriptor_InputTerminal_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
-
- uint8_t bDescriptorSubtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * must be \ref AUDIO_DSUBTYPE_CSInterface_InputTerminal.
- */
- uint8_t bTerminalID; /**< ID value of this terminal unit - must be a unique value within the device. */
- uint16_t wTerminalType; /**< Type of terminal, a \c TERMINAL_* mask. */
- uint8_t bAssocTerminal; /**< ID of associated output terminal, for physically grouped terminals
- * such as the speaker and microphone of a phone handset.
- */
- uint8_t bNrChannels; /**< Total number of separate audio channels within this interface (right, left, etc.) */
- uint16_t wChannelConfig; /**< \c CHANNEL_* masks indicating what channel layout is supported by this terminal. */
-
- uint8_t iChannelNames; /**< Index of a string descriptor describing this channel within the device. */
- uint8_t iTerminal; /**< Index of a string descriptor describing this descriptor within the device. */
- } ATTR_PACKED USB_Audio_StdDescriptor_InputTerminal_t;
-
- /** \brief Audio class-specific Output Terminal Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific output terminal descriptor. This indicates to the host that the device
- * contains an output audio sink, either to a physical terminal on the device, or a logical terminal (for example,
- * a USB endpoint). See the USB Audio specification for more details.
- *
- * \see \ref USB_Audio_StdDescriptor_OutputTerminal_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * must be \ref AUDIO_DSUBTYPE_CSInterface_OutputTerminal.
- */
-
- uint8_t TerminalID; /**< ID value of this terminal unit - must be a unique value within the device. */
- uint16_t TerminalType; /**< Type of terminal, a \c TERMINAL_* mask. */
- uint8_t AssociatedInputTerminal; /**< ID of associated input terminal, for physically grouped terminals
- * such as the speaker and microphone of a phone handset.
- */
- uint8_t SourceID; /**< ID value of the unit this terminal's audio is sourced from. */
-
- uint8_t TerminalStrIndex; /**< Index of a string descriptor describing this descriptor within the device. */
- } ATTR_PACKED USB_Audio_Descriptor_OutputTerminal_t;
-
- /** \brief Audio class-specific Output Terminal Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific output terminal descriptor. This indicates to the host that the device
- * contains an output audio sink, either to a physical terminal on the device, or a logical terminal (for example,
- * a USB endpoint). See the USB Audio specification for more details.
- *
- * \see \ref USB_Audio_Descriptor_OutputTerminal_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * must be \ref AUDIO_DSUBTYPE_CSInterface_OutputTerminal.
- */
-
- uint8_t bDescriptorSubtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * a value from the \ref Audio_CSInterface_AC_SubTypes_t enum.
- */
- uint8_t bTerminalID; /**< ID value of this terminal unit - must be a unique value within the device. */
- uint16_t wTerminalType; /**< Type of terminal, a \c TERMINAL_* mask. */
- uint8_t bAssocTerminal; /**< ID of associated input terminal, for physically grouped terminals
- * such as the speaker and microphone of a phone handset.
- */
- uint8_t bSourceID; /**< ID value of the unit this terminal's audio is sourced from. */
-
- uint8_t iTerminal; /**< Index of a string descriptor describing this descriptor within the device. */
- } ATTR_PACKED USB_Audio_StdDescriptor_OutputTerminal_t;
-
- /** \brief Audio class-specific Interface Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific interface descriptor. This follows a regular interface descriptor to
- * supply extra information about the audio device's layout to the host. See the USB Audio specification for more
- * details.
- *
- * \see \ref USB_Audio_StdDescriptor_Interface_AC_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * a value from the \ref Audio_CSInterface_AS_SubTypes_t enum.
- */
-
- uint16_t ACSpecification; /**< Binary coded decimal value, indicating the supported Audio Class specification version. */
- uint16_t TotalLength; /**< Total length of the Audio class-specific descriptors, including this descriptor. */
-
- uint8_t InCollection; /**< Total number of Audio Streaming interfaces linked to this Audio Control interface (must be 1). */
- uint8_t InterfaceNumber; /**< Interface number of the associated Audio Streaming interface. */
- } ATTR_PACKED USB_Audio_Descriptor_Interface_AC_t;
-
- /** \brief Audio class-specific Interface Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific interface descriptor. This follows a regular interface descriptor to
- * supply extra information about the audio device's layout to the host. See the USB Audio specification for more
- * details.
- *
- * \see \ref USB_Audio_Descriptor_Interface_AC_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
-
- uint8_t bDescriptorSubtype;/**< Sub type value used to distinguish between audio class-specific descriptors,
- * a value from the \ref Audio_CSInterface_AS_SubTypes_t enum.
- */
-
- uint16_t bcdADC; /**< Binary coded decimal value, indicating the supported Audio Class specification version. */
- uint16_t wTotalLength; /**< Total length of the Audio class-specific descriptors, including this descriptor. */
-
- uint8_t bInCollection; /**< Total number of Audio Streaming interfaces linked to this Audio Control interface (must be 1). */
- uint8_t bInterfaceNumbers; /**< Interface number of the associated Audio Streaming interface. */
- } ATTR_PACKED USB_Audio_StdDescriptor_Interface_AC_t;
-
- /** \brief Audio class-specific Feature Unit Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific Feature Unit descriptor. This indicates to the host what features
- * are present in the device's audio stream for basic control, such as per-channel volume. See the USB Audio
- * specification for more details.
- *
- * \see \ref USB_Audio_StdDescriptor_FeatureUnit_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * must be \ref AUDIO_DSUBTYPE_CSInterface_Feature.
- */
-
- uint8_t UnitID; /**< ID value of this feature unit - must be a unique value within the device. */
- uint8_t SourceID; /**< Source ID value of the audio source input into this feature unit. */
-
- uint8_t ControlSize; /**< Size of each element in the \c ChannelControls array. */
- uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each separate audio channel. */
-
- uint8_t FeatureUnitStrIndex; /**< Index of a string descriptor describing this descriptor within the device. */
- } ATTR_PACKED USB_Audio_Descriptor_FeatureUnit_t;
-
- /** \brief Audio class-specific Feature Unit Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific Feature Unit descriptor. This indicates to the host what features
- * are present in the device's audio stream for basic control, such as per-channel volume. See the USB Audio
- * specification for more details.
- *
- * \see \ref USB_Audio_Descriptor_FeatureUnit_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
-
- uint8_t bDescriptorSubtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * must be \ref AUDIO_DSUBTYPE_CSInterface_Feature.
- */
-
- uint8_t bUnitID; /**< ID value of this feature unit - must be a unique value within the device. */
- uint8_t bSourceID; /**< Source ID value of the audio source input into this feature unit. */
-
- uint8_t bControlSize; /**< Size of each element in the \c ChannelControls array. */
- uint8_t bmaControls[3]; /**< Feature masks for the control channel, and each separate audio channel. */
-
- uint8_t iFeature; /**< Index of a string descriptor describing this descriptor within the device. */
- } ATTR_PACKED USB_Audio_StdDescriptor_FeatureUnit_t;
-
- /** \brief Audio class-specific Streaming Audio Interface Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific streaming interface descriptor. This indicates to the host
- * how audio streams within the device are formatted. See the USB Audio specification for more details.
- *
- * \see \ref USB_Audio_StdDescriptor_Interface_AS_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * a value from the \ref Audio_CSInterface_AS_SubTypes_t enum.
- */
-
- uint8_t TerminalLink; /**< ID value of the output terminal this descriptor is describing. */
-
- uint8_t FrameDelay; /**< Delay in frames resulting from the complete sample processing from input to output. */
- uint16_t AudioFormat; /**< Format of the audio stream, see Audio Device Formats specification. */
- } ATTR_PACKED USB_Audio_Descriptor_Interface_AS_t;
-
- /** \brief Audio class-specific Streaming Audio Interface Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific streaming interface descriptor. This indicates to the host
- * how audio streams within the device are formatted. See the USB Audio specification for more details.
- *
- * \see \ref USB_Audio_Descriptor_Interface_AS_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
-
- uint8_t bDescriptorSubtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * a value from the \ref Audio_CSInterface_AS_SubTypes_t enum.
- */
-
- uint8_t bTerminalLink; /**< ID value of the output terminal this descriptor is describing. */
-
- uint8_t bDelay; /**< Delay in frames resulting from the complete sample processing from input to output. */
- uint16_t wFormatTag; /**< Format of the audio stream, see Audio Device Formats specification. */
- } ATTR_PACKED USB_Audio_StdDescriptor_Interface_AS_t;
-
- /** \brief Audio class-specific Format Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific audio format descriptor. This is used to give the host full details
- * about the number of channels, the sample resolution, acceptable sample frequencies and encoding method used
- * in the device's audio streams. See the USB Audio specification for more details.
- *
- * \attention This descriptor <b>must</b> be followed by one or more \ref USB_Audio_SampleFreq_t elements containing
- * the continuous or discrete sample frequencies.
- *
- * \see \ref USB_Audio_StdDescriptor_Format_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * must be \ref AUDIO_DSUBTYPE_CSInterface_FormatType.
- */
-
- uint8_t FormatType; /**< Format of the audio stream, see Audio Device Formats specification. */
- uint8_t Channels; /**< Total number of discrete channels in the stream. */
-
- uint8_t SubFrameSize; /**< Size in bytes of each channel's sample data in the stream. */
- uint8_t BitResolution; /**< Bits of resolution of each channel's samples in the stream. */
-
- uint8_t TotalDiscreteSampleRates; /**< Total number of discrete sample frequencies supported by the device. When
- * zero, this must be followed by the lower and upper continuous sampling
- * frequencies supported by the device; otherwise, this must be followed
- * by the given number of discrete sampling frequencies supported.
- */
- } ATTR_PACKED USB_Audio_Descriptor_Format_t;
-
- /** \brief 24-Bit Audio Frequency Structure.
- *
- * Type define for a 24bit audio sample frequency structure. As GCC does not contain a built in 24-bit datatype,
- * this this structure is used to build up the value instead. Fill this structure with the \ref AUDIO_SAMPLE_FREQ() macro.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t Byte1; /**< Lowest 8 bits of the 24-bit value. */
- uint8_t Byte2; /**< Middle 8 bits of the 24-bit value. */
- uint8_t Byte3; /**< Upper 8 bits of the 24-bit value. */
- } ATTR_PACKED USB_Audio_SampleFreq_t;
-
- /** \brief Audio class-specific Format Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific audio format descriptor. This is used to give the host full details
- * about the number of channels, the sample resolution, acceptable sample frequencies and encoding method used
- * in the device's audio streams. See the USB Audio specification for more details.
- *
- * \attention This descriptor <b>must</b> be followed by one or more 24-bit integer elements containing the continuous
- * or discrete sample frequencies.
- *
- * \see \ref USB_Audio_Descriptor_Format_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * must be \ref AUDIO_DSUBTYPE_CSInterface_FormatType.
- */
-
- uint8_t bDescriptorSubtype;/**< Sub type value used to distinguish between audio class-specific descriptors,
- * a value from the \ref Audio_CSInterface_AS_SubTypes_t enum.
- */
-
- uint8_t bFormatType; /**< Format of the audio stream, see Audio Device Formats specification. */
- uint8_t bNrChannels; /**< Total number of discrete channels in the stream. */
-
- uint8_t bSubFrameSize; /**< Size in bytes of each channel's sample data in the stream. */
- uint8_t bBitResolution; /**< Bits of resolution of each channel's samples in the stream. */
-
- uint8_t bSampleFrequencyType; /**< Total number of sample frequencies supported by the device. When
- * zero, this must be followed by the lower and upper continuous sampling
- * frequencies supported by the device; otherwise, this must be followed
- * by the given number of discrete sampling frequencies supported.
- */
- } ATTR_PACKED USB_Audio_StdDescriptor_Format_t;
-
- /** \brief Audio class-specific Streaming Endpoint Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific endpoint descriptor. This contains a regular endpoint
- * descriptor with a few Audio-class-specific extensions. See the USB Audio specification for more details.
- *
- * \see \ref USB_Audio_StdDescriptor_StreamEndpoint_Std_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Endpoint_t Endpoint; /**< Standard endpoint descriptor describing the audio endpoint. */
-
- uint8_t Refresh; /**< Always set to zero for Audio class devices. */
- uint8_t SyncEndpointNumber; /**< Endpoint address to send synchronization information to, if needed (zero otherwise). */
- } ATTR_PACKED USB_Audio_Descriptor_StreamEndpoint_Std_t;
-
- /** \brief Audio class-specific Streaming Endpoint Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific endpoint descriptor. This contains a regular endpoint
- * descriptor with a few Audio-class-specific extensions. See the USB Audio specification for more details.
- *
- * \see \ref USB_Audio_Descriptor_StreamEndpoint_Std_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a
- * value given by the specific class.
- */
- uint8_t bEndpointAddress; /**< Logical address of the endpoint within the device for the current
- * configuration, including direction mask.
- */
- uint8_t bmAttributes; /**< Endpoint attributes, comprised of a mask of the endpoint type (\c EP_TYPE_*)
- * and attributes (\c ENDPOINT_ATTR_*) masks.
- */
- uint16_t wMaxPacketSize; /**< Size of the endpoint bank, in bytes. This indicates the maximum packet size
- * that the endpoint can receive at a time.
- */
- uint8_t bInterval; /**< Polling interval in milliseconds for the endpoint if it is an INTERRUPT or
- * ISOCHRONOUS type.
- */
-
- uint8_t bRefresh; /**< Always set to zero for Audio class devices. */
- uint8_t bSynchAddress; /**< Endpoint address to send synchronization information to, if needed (zero otherwise). */
- } ATTR_PACKED USB_Audio_StdDescriptor_StreamEndpoint_Std_t;
-
- /** \brief Audio class-specific Extended Endpoint Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific extended endpoint descriptor. This contains extra information
- * on the usage of endpoints used to stream audio in and out of the USB Audio device, and follows an Audio
- * class-specific extended endpoint descriptor. See the USB Audio specification for more details.
- *
- * \see \ref USB_Audio_StdDescriptor_StreamEndpoint_Spc_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * a value from the \ref Audio_CSEndpoint_SubTypes_t enum.
- */
-
- uint8_t Attributes; /**< Audio class-specific endpoint attributes, such as \ref AUDIO_EP_FULL_PACKETS_ONLY. */
-
- uint8_t LockDelayUnits; /**< Units used for the LockDelay field, see Audio class specification. */
- uint16_t LockDelay; /**< Time required to internally lock endpoint's internal clock recovery circuitry. */
- } ATTR_PACKED USB_Audio_Descriptor_StreamEndpoint_Spc_t;
-
- /** \brief Audio class-specific Extended Endpoint Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific extended endpoint descriptor. This contains extra information
- * on the usage of endpoints used to stream audio in and out of the USB Audio device, and follows an Audio
- * class-specific extended endpoint descriptor. See the USB Audio specification for more details.
- *
- * \see \ref USB_Audio_Descriptor_StreamEndpoint_Spc_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
-
- uint8_t bDescriptorSubtype; /**< Sub type value used to distinguish between audio class-specific descriptors,
- * a value from the \ref Audio_CSEndpoint_SubTypes_t enum.
- */
-
- uint8_t bmAttributes; /**< Audio class-specific endpoint attributes, such as \ref AUDIO_EP_FULL_PACKETS_ONLY. */
-
- uint8_t bLockDelayUnits; /**< Units used for the LockDelay field, see Audio class specification. */
- uint16_t wLockDelay; /**< Time required to internally lock endpoint's internal clock recovery circuitry. */
- } ATTR_PACKED USB_Audio_StdDescriptor_StreamEndpoint_Spc_t;
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/CDCClassCommon.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/CDCClassCommon.h deleted file mode 100644 index f14a766cd..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/CDCClassCommon.h +++ /dev/null @@ -1,386 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common definitions and declarations for the library USB CDC Class driver.
- *
- * Common definitions and declarations for the library USB CDC Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassCDC
- * \defgroup Group_USBClassCDCCommon Common Class Definitions
- *
- * \section Sec_ModDescription Module Description
- * Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
- * CDC Class.
- *
- * @{
- */
-
-#ifndef _CDC_CLASS_COMMON_H_
-#define _CDC_CLASS_COMMON_H_
-
- /* Includes: */
- #include "../../Core/StdDescriptors.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_CDC_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Macros: */
- /** \name Virtual Control Line Masks */
- //@{
- /** Mask for the DTR handshake line for use with the \ref CDC_REQ_SetControlLineState class-specific request
- * from the host, to indicate that the DTR line state should be high.
- */
- #define CDC_CONTROL_LINE_OUT_DTR (1 << 0)
-
- /** Mask for the RTS handshake line for use with the \ref CDC_REQ_SetControlLineState class-specific request
- * from the host, to indicate that the RTS line state should be high.
- */
- #define CDC_CONTROL_LINE_OUT_RTS (1 << 1)
-
- /** Mask for the DCD handshake line for use with the \ref CDC_NOTIF_SerialState class-specific notification
- * from the device to the host, to indicate that the DCD line state is currently high.
- */
- #define CDC_CONTROL_LINE_IN_DCD (1 << 0)
-
- /** Mask for the DSR handshake line for use with the \ref CDC_NOTIF_SerialState class-specific notification
- * from the device to the host, to indicate that the DSR line state is currently high.
- */
- #define CDC_CONTROL_LINE_IN_DSR (1 << 1)
-
- /** Mask for the BREAK handshake line for use with the \ref CDC_NOTIF_SerialState class-specific notification
- * from the device to the host, to indicate that the BREAK line state is currently high.
- */
- #define CDC_CONTROL_LINE_IN_BREAK (1 << 2)
-
- /** Mask for the RING handshake line for use with the \ref CDC_NOTIF_SerialState class-specific notification
- * from the device to the host, to indicate that the RING line state is currently high.
- */
- #define CDC_CONTROL_LINE_IN_RING (1 << 3)
-
- /** Mask for use with the \ref CDC_NOTIF_SerialState class-specific notification from the device to the host,
- * to indicate that a framing error has occurred on the virtual serial port.
- */
- #define CDC_CONTROL_LINE_IN_FRAMEERROR (1 << 4)
-
- /** Mask for use with the \ref CDC_NOTIF_SerialState class-specific notification from the device to the host,
- * to indicate that a parity error has occurred on the virtual serial port.
- */
- #define CDC_CONTROL_LINE_IN_PARITYERROR (1 << 5)
-
- /** Mask for use with the \ref CDC_NOTIF_SerialState class-specific notification from the device to the host,
- * to indicate that a data overrun error has occurred on the virtual serial port.
- */
- #define CDC_CONTROL_LINE_IN_OVERRUNERROR (1 << 6)
- //@}
-
- /** Macro to define a CDC class-specific functional descriptor. CDC functional descriptors have a
- * uniform structure but variable sized data payloads, thus cannot be represented accurately by
- * a single typedef struct. A macro is used instead so that functional descriptors can be created
- * easily by specifying the size of the payload. This allows \c sizeof() to work correctly.
- *
- * \param[in] DataSize Size in bytes of the CDC functional descriptor's data payload.
- */
- #define CDC_FUNCTIONAL_DESCRIPTOR(DataSize) \
- struct \
- { \
- USB_Descriptor_Header_t Header; \
- uint8_t SubType; \
- uint8_t Data[DataSize]; \
- }
-
- /* Enums: */
- /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the CDC
- * device class.
- */
- enum CDC_Descriptor_ClassSubclassProtocol_t
- {
- CDC_CSCP_CDCClass = 0x02, /**< Descriptor Class value indicating that the device or interface
- * belongs to the CDC class.
- */
- CDC_CSCP_NoSpecificSubclass = 0x00, /**< Descriptor Subclass value indicating that the device or interface
- * belongs to no specific subclass of the CDC class.
- */
- CDC_CSCP_ACMSubclass = 0x02, /**< Descriptor Subclass value indicating that the device or interface
- * belongs to the Abstract Control Model CDC subclass.
- */
- CDC_CSCP_ATCommandProtocol = 0x01, /**< Descriptor Protocol value indicating that the device or interface
- * belongs to the AT Command protocol of the CDC class.
- */
- CDC_CSCP_NoSpecificProtocol = 0x00, /**< Descriptor Protocol value indicating that the device or interface
- * belongs to no specific protocol of the CDC class.
- */
- CDC_CSCP_VendorSpecificProtocol = 0xFF, /**< Descriptor Protocol value indicating that the device or interface
- * belongs to a vendor-specific protocol of the CDC class.
- */
- CDC_CSCP_CDCDataClass = 0x0A, /**< Descriptor Class value indicating that the device or interface
- * belongs to the CDC Data class.
- */
- CDC_CSCP_NoDataSubclass = 0x00, /**< Descriptor Subclass value indicating that the device or interface
- * belongs to no specific subclass of the CDC data class.
- */
- CDC_CSCP_NoDataProtocol = 0x00, /**< Descriptor Protocol value indicating that the device or interface
- * belongs to no specific protocol of the CDC data class.
- */
- };
-
- /** Enum for the CDC class specific control requests that can be issued by the USB bus host. */
- enum CDC_ClassRequests_t
- {
- CDC_REQ_SendEncapsulatedCommand = 0x00, /**< CDC class-specific request to send an encapsulated command to the device. */
- CDC_REQ_GetEncapsulatedResponse = 0x01, /**< CDC class-specific request to retrieve an encapsulated command response from the device. */
- CDC_REQ_SetLineEncoding = 0x20, /**< CDC class-specific request to set the current virtual serial port configuration settings. */
- CDC_REQ_GetLineEncoding = 0x21, /**< CDC class-specific request to get the current virtual serial port configuration settings. */
- CDC_REQ_SetControlLineState = 0x22, /**< CDC class-specific request to set the current virtual serial port handshake line states. */
- CDC_REQ_SendBreak = 0x23, /**< CDC class-specific request to send a break to the receiver via the carrier channel. */
- };
-
- /** Enum for the CDC class specific notification requests that can be issued by a CDC device to a host. */
- enum CDC_ClassNotifications_t
- {
- CDC_NOTIF_SerialState = 0x20, /**< Notification type constant for a change in the virtual serial port
- * handshake line states, for use with a \ref USB_Request_Header_t
- * notification structure when sent to the host via the CDC notification
- * endpoint.
- */
- };
-
- /** Enum for the CDC class specific interface descriptor subtypes. */
- enum CDC_DescriptorSubtypes_t
- {
- CDC_DSUBTYPE_CSInterface_Header = 0x00, /**< CDC class-specific Header functional descriptor. */
- CDC_DSUBTYPE_CSInterface_CallManagement = 0x01, /**< CDC class-specific Call Management functional descriptor. */
- CDC_DSUBTYPE_CSInterface_ACM = 0x02, /**< CDC class-specific Abstract Control Model functional descriptor. */
- CDC_DSUBTYPE_CSInterface_DirectLine = 0x03, /**< CDC class-specific Direct Line functional descriptor. */
- CDC_DSUBTYPE_CSInterface_TelephoneRinger = 0x04, /**< CDC class-specific Telephone Ringer functional descriptor. */
- CDC_DSUBTYPE_CSInterface_TelephoneCall = 0x05, /**< CDC class-specific Telephone Call functional descriptor. */
- CDC_DSUBTYPE_CSInterface_Union = 0x06, /**< CDC class-specific Union functional descriptor. */
- CDC_DSUBTYPE_CSInterface_CountrySelection = 0x07, /**< CDC class-specific Country Selection functional descriptor. */
- CDC_DSUBTYPE_CSInterface_TelephoneOpModes = 0x08, /**< CDC class-specific Telephone Operation Modes functional descriptor. */
- CDC_DSUBTYPE_CSInterface_USBTerminal = 0x09, /**< CDC class-specific USB Terminal functional descriptor. */
- CDC_DSUBTYPE_CSInterface_NetworkChannel = 0x0A, /**< CDC class-specific Network Channel functional descriptor. */
- CDC_DSUBTYPE_CSInterface_ProtocolUnit = 0x0B, /**< CDC class-specific Protocol Unit functional descriptor. */
- CDC_DSUBTYPE_CSInterface_ExtensionUnit = 0x0C, /**< CDC class-specific Extension Unit functional descriptor. */
- CDC_DSUBTYPE_CSInterface_MultiChannel = 0x0D, /**< CDC class-specific Multi-Channel Management functional descriptor. */
- CDC_DSUBTYPE_CSInterface_CAPI = 0x0E, /**< CDC class-specific Common ISDN API functional descriptor. */
- CDC_DSUBTYPE_CSInterface_Ethernet = 0x0F, /**< CDC class-specific Ethernet functional descriptor. */
- CDC_DSUBTYPE_CSInterface_ATM = 0x10, /**< CDC class-specific Asynchronous Transfer Mode functional descriptor. */
- };
-
- /** Enum for the possible line encoding formats of a virtual serial port. */
- enum CDC_LineEncodingFormats_t
- {
- CDC_LINEENCODING_OneStopBit = 0, /**< Each frame contains one stop bit. */
- CDC_LINEENCODING_OneAndAHalfStopBits = 1, /**< Each frame contains one and a half stop bits. */
- CDC_LINEENCODING_TwoStopBits = 2, /**< Each frame contains two stop bits. */
- };
-
- /** Enum for the possible line encoding parity settings of a virtual serial port. */
- enum CDC_LineEncodingParity_t
- {
- CDC_PARITY_None = 0, /**< No parity bit mode on each frame. */
- CDC_PARITY_Odd = 1, /**< Odd parity bit mode on each frame. */
- CDC_PARITY_Even = 2, /**< Even parity bit mode on each frame. */
- CDC_PARITY_Mark = 3, /**< Mark parity bit mode on each frame. */
- CDC_PARITY_Space = 4, /**< Space parity bit mode on each frame. */
- };
-
- /* Type Defines: */
- /** \brief CDC class-specific Functional Header Descriptor (LUFA naming conventions).
- *
- * Type define for a CDC class-specific functional header descriptor. This indicates to the host that the device
- * contains one or more CDC functional data descriptors, which give the CDC interface's capabilities and configuration.
- * See the CDC class specification for more details.
- *
- * \see \ref USB_CDC_StdDescriptor_FunctionalHeader_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors,
- * must be \ref CDC_DSUBTYPE_CSInterface_Header.
- */
- uint16_t CDCSpecification; /**< Version number of the CDC specification implemented by the device,
- * encoded in BCD format.
- */
- } ATTR_PACKED USB_CDC_Descriptor_FunctionalHeader_t;
-
- /** \brief CDC class-specific Functional Header Descriptor (USB-IF naming conventions).
- *
- * Type define for a CDC class-specific functional header descriptor. This indicates to the host that the device
- * contains one or more CDC functional data descriptors, which give the CDC interface's capabilities and configuration.
- * See the CDC class specification for more details.
- *
- * \see \ref USB_CDC_Descriptor_FunctionalHeader_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bFunctionLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
- uint8_t bDescriptorSubType; /**< Sub type value used to distinguish between CDC class-specific descriptors,
- * must be \ref CDC_DSUBTYPE_CSInterface_Header.
- */
- uint16_t bcdCDC; /**< Version number of the CDC specification implemented by the device, encoded in BCD format. */
- } ATTR_PACKED USB_CDC_StdDescriptor_FunctionalHeader_t;
-
- /** \brief CDC class-specific Functional ACM Descriptor (LUFA naming conventions).
- *
- * Type define for a CDC class-specific functional ACM descriptor. This indicates to the host that the CDC interface
- * supports the CDC ACM subclass of the CDC specification. See the CDC class specification for more details.
- *
- * \see \ref USB_CDC_StdDescriptor_FunctionalACM_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors,
- * must be \ref CDC_DSUBTYPE_CSInterface_ACM.
- */
- uint8_t Capabilities; /**< Capabilities of the ACM interface, given as a bit mask. For most devices,
- * this should be set to a fixed value of 0x06 - for other capabilities, refer
- * to the CDC ACM specification.
- */
- } ATTR_PACKED USB_CDC_Descriptor_FunctionalACM_t;
-
- /** \brief CDC class-specific Functional ACM Descriptor (USB-IF naming conventions).
- *
- * Type define for a CDC class-specific functional ACM descriptor. This indicates to the host that the CDC interface
- * supports the CDC ACM subclass of the CDC specification. See the CDC class specification for more details.
- *
- * \see \ref USB_CDC_Descriptor_FunctionalACM_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bFunctionLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
- uint8_t bDescriptorSubType; /**< Sub type value used to distinguish between CDC class-specific descriptors,
- * must be \ref CDC_DSUBTYPE_CSInterface_ACM.
- */
- uint8_t bmCapabilities; /**< Capabilities of the ACM interface, given as a bit mask. For most devices,
- * this should be set to a fixed value of 0x06 - for other capabilities, refer
- * to the CDC ACM specification.
- */
- } ATTR_PACKED USB_CDC_StdDescriptor_FunctionalACM_t;
-
- /** \brief CDC class-specific Functional Union Descriptor (LUFA naming conventions).
- *
- * Type define for a CDC class-specific functional Union descriptor. This indicates to the host that specific
- * CDC control and data interfaces are related. See the CDC class specification for more details.
- *
- * \see \ref USB_CDC_StdDescriptor_FunctionalUnion_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between CDC class-specific descriptors,
- * must be \ref CDC_DSUBTYPE_CSInterface_Union.
- */
- uint8_t MasterInterfaceNumber; /**< Interface number of the CDC Control interface. */
- uint8_t SlaveInterfaceNumber; /**< Interface number of the CDC Data interface. */
- } ATTR_PACKED USB_CDC_Descriptor_FunctionalUnion_t;
-
- /** \brief CDC class-specific Functional Union Descriptor (USB-IF naming conventions).
- *
- * Type define for a CDC class-specific functional Union descriptor. This indicates to the host that specific
- * CDC control and data interfaces are related. See the CDC class specification for more details.
- *
- * \see \ref USB_CDC_Descriptor_FunctionalUnion_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bFunctionLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
- uint8_t bDescriptorSubType; /**< Sub type value used to distinguish between CDC class-specific descriptors,
- * must be \ref CDC_DSUBTYPE_CSInterface_Union.
- */
- uint8_t bMasterInterface; /**< Interface number of the CDC Control interface. */
- uint8_t bSlaveInterface0; /**< Interface number of the CDC Data interface. */
- } ATTR_PACKED USB_CDC_StdDescriptor_FunctionalUnion_t;
-
- /** \brief CDC Virtual Serial Port Line Encoding Settings Structure.
- *
- * Type define for a CDC Line Encoding structure, used to hold the various encoding parameters for a virtual
- * serial port.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t BaudRateBPS; /**< Baud rate of the virtual serial port, in bits per second. */
- uint8_t CharFormat; /**< Character format of the virtual serial port, a value from the
- * \ref CDC_LineEncodingFormats_t enum.
- */
- uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the
- * \ref CDC_LineEncodingParity_t enum.
- */
- uint8_t DataBits; /**< Bits of data per character of the virtual serial port. */
- } ATTR_PACKED CDC_LineEncoding_t;
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDClassCommon.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDClassCommon.h deleted file mode 100644 index bc5cb4652..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDClassCommon.h +++ /dev/null @@ -1,655 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common definitions and declarations for the library USB HID Class driver.
- *
- * Common definitions and declarations for the library USB HID Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassHID
- * \defgroup Group_USBClassHIDCommon Common Class Definitions
- *
- * \section Sec_ModDescription Module Description
- * Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
- * HID Class.
- *
- * @{
- */
-
-#ifndef _HID_CLASS_COMMON_H_
-#define _HID_CLASS_COMMON_H_
-
- /* Includes: */
- #include "../../Core/StdDescriptors.h"
- #include "HIDParser.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_HID_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Macros: */
- /** \name Keyboard Standard Report Modifier Masks */
- //@{
- /** Constant for a keyboard report modifier byte, indicating that the keyboard's left control key is currently pressed. */
- #define HID_KEYBOARD_MODIFIER_LEFTCTRL (1 << 0)
-
- /** Constant for a keyboard report modifier byte, indicating that the keyboard's left shift key is currently pressed. */
- #define HID_KEYBOARD_MODIFIER_LEFTSHIFT (1 << 1)
-
- /** Constant for a keyboard report modifier byte, indicating that the keyboard's left alt key is currently pressed. */
- #define HID_KEYBOARD_MODIFIER_LEFTALT (1 << 2)
-
- /** Constant for a keyboard report modifier byte, indicating that the keyboard's left GUI key is currently pressed. */
- #define HID_KEYBOARD_MODIFIER_LEFTGUI (1 << 3)
-
- /** Constant for a keyboard report modifier byte, indicating that the keyboard's right control key is currently pressed. */
- #define HID_KEYBOARD_MODIFIER_RIGHTCTRL (1 << 4)
-
- /** Constant for a keyboard report modifier byte, indicating that the keyboard's right shift key is currently pressed. */
- #define HID_KEYBOARD_MODIFIER_RIGHTSHIFT (1 << 5)
-
- /** Constant for a keyboard report modifier byte, indicating that the keyboard's right alt key is currently pressed. */
- #define HID_KEYBOARD_MODIFIER_RIGHTALT (1 << 6)
-
- /** Constant for a keyboard report modifier byte, indicating that the keyboard's right GUI key is currently pressed. */
- #define HID_KEYBOARD_MODIFIER_RIGHTGUI (1 << 7)
- //@}
-
- /** \name Keyboard Standard Report LED Masks */
- //@{
- /** Constant for a keyboard output report LED byte, indicating that the host's NUM LOCK mode is currently set. */
- #define HID_KEYBOARD_LED_NUMLOCK (1 << 0)
-
- /** Constant for a keyboard output report LED byte, indicating that the host's CAPS LOCK mode is currently set. */
- #define HID_KEYBOARD_LED_CAPSLOCK (1 << 1)
-
- /** Constant for a keyboard output report LED byte, indicating that the host's SCROLL LOCK mode is currently set. */
- #define HID_KEYBOARD_LED_SCROLLLOCK (1 << 2)
-
- /** Constant for a keyboard output report LED byte, indicating that the host's KATANA mode is currently set. */
- #define HID_KEYBOARD_LED_KATANA (1 << 3)
- //@}
-
- /** \name Keyboard Standard Report Key Scan-codes */
- //@{
- #define HID_KEYBOARD_SC_ERROR_ROLLOVER 0x01
- #define HID_KEYBOARD_SC_POST_FAIL 0x02
- #define HID_KEYBOARD_SC_ERROR_UNDEFINED 0x03
- #define HID_KEYBOARD_SC_A 0x04
- #define HID_KEYBOARD_SC_B 0x05
- #define HID_KEYBOARD_SC_C 0x06
- #define HID_KEYBOARD_SC_D 0x07
- #define HID_KEYBOARD_SC_E 0x08
- #define HID_KEYBOARD_SC_F 0x09
- #define HID_KEYBOARD_SC_G 0x0A
- #define HID_KEYBOARD_SC_H 0x0B
- #define HID_KEYBOARD_SC_I 0x0C
- #define HID_KEYBOARD_SC_J 0x0D
- #define HID_KEYBOARD_SC_K 0x0E
- #define HID_KEYBOARD_SC_L 0x0F
- #define HID_KEYBOARD_SC_M 0x10
- #define HID_KEYBOARD_SC_N 0x11
- #define HID_KEYBOARD_SC_O 0x12
- #define HID_KEYBOARD_SC_P 0x13
- #define HID_KEYBOARD_SC_Q 0x14
- #define HID_KEYBOARD_SC_R 0x15
- #define HID_KEYBOARD_SC_S 0x16
- #define HID_KEYBOARD_SC_T 0x17
- #define HID_KEYBOARD_SC_U 0x18
- #define HID_KEYBOARD_SC_V 0x19
- #define HID_KEYBOARD_SC_W 0x1A
- #define HID_KEYBOARD_SC_X 0x1B
- #define HID_KEYBOARD_SC_Y 0x1C
- #define HID_KEYBOARD_SC_Z 0x1D
- #define HID_KEYBOARD_SC_1_AND_EXCLAMATION 0x1E
- #define HID_KEYBOARD_SC_2_AND_AT 0x1F
- #define HID_KEYBOARD_SC_3_AND_HASHMARK 0x20
- #define HID_KEYBOARD_SC_4_AND_DOLLAR 0x21
- #define HID_KEYBOARD_SC_5_AND_PERCENTAGE 0x22
- #define HID_KEYBOARD_SC_6_AND_CARET 0x23
- #define HID_KEYBOARD_SC_7_AND_AND_AMPERSAND 0x24
- #define HID_KEYBOARD_SC_8_AND_ASTERISK 0x25
- #define HID_KEYBOARD_SC_9_AND_OPENING_PARENTHESIS 0x26
- #define HID_KEYBOARD_SC_0_AND_CLOSING_PARENTHESIS 0x27
- #define HID_KEYBOARD_SC_ENTER 0x28
- #define HID_KEYBOARD_SC_ESCAPE 0x29
- #define HID_KEYBOARD_SC_BACKSPACE 0x2A
- #define HID_KEYBOARD_SC_TAB 0x2B
- #define HID_KEYBOARD_SC_SPACE 0x2C
- #define HID_KEYBOARD_SC_MINUS_AND_UNDERSCORE 0x2D
- #define HID_KEYBOARD_SC_EQUAL_AND_PLUS 0x2E
- #define HID_KEYBOARD_SC_OPENING_BRACKET_AND_OPENING_BRACE 0x2F
- #define HID_KEYBOARD_SC_CLOSING_BRACKET_AND_CLOSING_BRACE 0x30
- #define HID_KEYBOARD_SC_BACKSLASH_AND_PIPE 0x31
- #define HID_KEYBOARD_SC_NON_US_HASHMARK_AND_TILDE 0x32
- #define HID_KEYBOARD_SC_SEMICOLON_AND_COLON 0x33
- #define HID_KEYBOARD_SC_APOSTROPHE_AND_QUOTE 0x34
- #define HID_KEYBOARD_SC_GRAVE_ACCENT_AND_TILDE 0x35
- #define HID_KEYBOARD_SC_COMMA_AND_LESS_THAN_SIGN 0x36
- #define HID_KEYBOARD_SC_DOT_AND_GREATER_THAN_SIGN 0x37
- #define HID_KEYBOARD_SC_SLASH_AND_QUESTION_MARK 0x38
- #define HID_KEYBOARD_SC_CAPS_LOCK 0x39
- #define HID_KEYBOARD_SC_F1 0x3A
- #define HID_KEYBOARD_SC_F2 0x3B
- #define HID_KEYBOARD_SC_F3 0x3C
- #define HID_KEYBOARD_SC_F4 0x3D
- #define HID_KEYBOARD_SC_F5 0x3E
- #define HID_KEYBOARD_SC_F6 0x3F
- #define HID_KEYBOARD_SC_F7 0x40
- #define HID_KEYBOARD_SC_F8 0x41
- #define HID_KEYBOARD_SC_F9 0x42
- #define HID_KEYBOARD_SC_F10 0x43
- #define HID_KEYBOARD_SC_F11 0x44
- #define HID_KEYBOARD_SC_F12 0x45
- #define HID_KEYBOARD_SC_PRINT_SCREEN 0x46
- #define HID_KEYBOARD_SC_SCROLL_LOCK 0x47
- #define HID_KEYBOARD_SC_PAUSE 0x48
- #define HID_KEYBOARD_SC_INSERT 0x49
- #define HID_KEYBOARD_SC_HOME 0x4A
- #define HID_KEYBOARD_SC_PAGE_UP 0x4B
- #define HID_KEYBOARD_SC_DELETE 0x4C
- #define HID_KEYBOARD_SC_END 0x4D
- #define HID_KEYBOARD_SC_PAGE_DOWN 0x4E
- #define HID_KEYBOARD_SC_RIGHT_ARROW 0x4F
- #define HID_KEYBOARD_SC_LEFT_ARROW 0x50
- #define HID_KEYBOARD_SC_DOWN_ARROW 0x51
- #define HID_KEYBOARD_SC_UP_ARROW 0x52
- #define HID_KEYBOARD_SC_NUM_LOCK 0x53
- #define HID_KEYBOARD_SC_KEYPAD_SLASH 0x54
- #define HID_KEYBOARD_SC_KEYPAD_ASTERISK 0x55
- #define HID_KEYBOARD_SC_KEYPAD_MINUS 0x56
- #define HID_KEYBOARD_SC_KEYPAD_PLUS 0x57
- #define HID_KEYBOARD_SC_KEYPAD_ENTER 0x58
- #define HID_KEYBOARD_SC_KEYPAD_1_AND_END 0x59
- #define HID_KEYBOARD_SC_KEYPAD_2_AND_DOWN_ARROW 0x5A
- #define HID_KEYBOARD_SC_KEYPAD_3_AND_PAGE_DOWN 0x5B
- #define HID_KEYBOARD_SC_KEYPAD_4_AND_LEFT_ARROW 0x5C
- #define HID_KEYBOARD_SC_KEYPAD_5 0x5D
- #define HID_KEYBOARD_SC_KEYPAD_6_AND_RIGHT_ARROW 0x5E
- #define HID_KEYBOARD_SC_KEYPAD_7_AND_HOME 0x5F
- #define HID_KEYBOARD_SC_KEYPAD_8_AND_UP_ARROW 0x60
- #define HID_KEYBOARD_SC_KEYPAD_9_AND_PAGE_UP 0x61
- #define HID_KEYBOARD_SC_KEYPAD_0_AND_INSERT 0x62
- #define HID_KEYBOARD_SC_KEYPAD_DOT_AND_DELETE 0x63
- #define HID_KEYBOARD_SC_NON_US_BACKSLASH_AND_PIPE 0x64
- #define HID_KEYBOARD_SC_POWER 0x66
- #define HID_KEYBOARD_SC_EQUAL_SIGN 0x67
- #define HID_KEYBOARD_SC_F13 0x68
- #define HID_KEYBOARD_SC_F14 0x69
- #define HID_KEYBOARD_SC_F15 0x6A
- #define HID_KEYBOARD_SC_F16 0x6B
- #define HID_KEYBOARD_SC_F17 0x6C
- #define HID_KEYBOARD_SC_F18 0x6D
- #define HID_KEYBOARD_SC_F19 0x6E
- #define HID_KEYBOARD_SC_F20 0x6F
- #define HID_KEYBOARD_SC_F21 0x70
- #define HID_KEYBOARD_SC_F22 0x71
- #define HID_KEYBOARD_SC_F23 0x72
- #define HID_KEYBOARD_SC_F24 0x73
- #define HID_KEYBOARD_SC_EXECUTE 0x74
- #define HID_KEYBOARD_SC_HELP 0x75
- #define HID_KEYBOARD_SC_MANU 0x76
- #define HID_KEYBOARD_SC_SELECT 0x77
- #define HID_KEYBOARD_SC_STOP 0x78
- #define HID_KEYBOARD_SC_AGAIN 0x79
- #define HID_KEYBOARD_SC_UNDO 0x7A
- #define HID_KEYBOARD_SC_CUT 0x7B
- #define HID_KEYBOARD_SC_COPY 0x7C
- #define HID_KEYBOARD_SC_PASTE 0x7D
- #define HID_KEYBOARD_SC_FIND 0x7E
- #define HID_KEYBOARD_SC_MUTE 0x7F
- #define HID_KEYBOARD_SC_VOLUME_UP 0x80
- #define HID_KEYBOARD_SC_VOLUME_DOWN 0x81
- #define HID_KEYBOARD_SC_LOCKING_CAPS_LOCK 0x82
- #define HID_KEYBOARD_SC_LOCKING_NUM_LOCK 0x83
- #define HID_KEYBOARD_SC_LOCKING_SCROLL_LOCK 0x84
- #define HID_KEYBOARD_SC_KEYPAD_COMMA 0x85
- #define HID_KEYBOARD_SC_KEYPAD_EQUAL_SIGN 0x86
- #define HID_KEYBOARD_SC_INTERNATIONAL1 0x87
- #define HID_KEYBOARD_SC_INTERNATIONAL2 0x88
- #define HID_KEYBOARD_SC_INTERNATIONAL3 0x89
- #define HID_KEYBOARD_SC_INTERNATIONAL4 0x8A
- #define HID_KEYBOARD_SC_INTERNATIONAL5 0x8B
- #define HID_KEYBOARD_SC_INTERNATIONAL6 0x8C
- #define HID_KEYBOARD_SC_INTERNATIONAL7 0x8D
- #define HID_KEYBOARD_SC_INTERNATIONAL8 0x8E
- #define HID_KEYBOARD_SC_INTERNATIONAL9 0x8F
- #define HID_KEYBOARD_SC_LANG1 0x90
- #define HID_KEYBOARD_SC_LANG2 0x91
- #define HID_KEYBOARD_SC_LANG3 0x92
- #define HID_KEYBOARD_SC_LANG4 0x93
- #define HID_KEYBOARD_SC_LANG5 0x94
- #define HID_KEYBOARD_SC_LANG6 0x95
- #define HID_KEYBOARD_SC_LANG7 0x96
- #define HID_KEYBOARD_SC_LANG8 0x97
- #define HID_KEYBOARD_SC_LANG9 0x98
- #define HID_KEYBOARD_SC_ALTERNATE_ERASE 0x99
- #define HID_KEYBOARD_SC_SISREQ 0x9A
- #define HID_KEYBOARD_SC_CANCEL 0x9B
- #define HID_KEYBOARD_SC_CLEAR 0x9C
- #define HID_KEYBOARD_SC_PRIOR 0x9D
- #define HID_KEYBOARD_SC_RETURN 0x9E
- #define HID_KEYBOARD_SC_SEPARATOR 0x9F
- #define HID_KEYBOARD_SC_OUT 0xA0
- #define HID_KEYBOARD_SC_OPER 0xA1
- #define HID_KEYBOARD_SC_CLEAR_AND_AGAIN 0xA2
- #define HID_KEYBOARD_SC_CRSEL_ANDPROPS 0xA3
- #define HID_KEYBOARD_SC_EXSEL 0xA4
- #define HID_KEYBOARD_SC_KEYPAD_00 0xB0
- #define HID_KEYBOARD_SC_KEYPAD_000 0xB1
- #define HID_KEYBOARD_SC_THOUSANDS_SEPARATOR 0xB2
- #define HID_KEYBOARD_SC_DECIMAL_SEPARATOR 0xB3
- #define HID_KEYBOARD_SC_CURRENCY_UNIT 0xB4
- #define HID_KEYBOARD_SC_CURRENCY_SUB_UNIT 0xB5
- #define HID_KEYBOARD_SC_KEYPAD_OPENING_PARENTHESIS 0xB6
- #define HID_KEYBOARD_SC_KEYPAD_CLOSING_PARENTHESIS 0xB7
- #define HID_KEYBOARD_SC_KEYPAD_OPENING_BRACE 0xB8
- #define HID_KEYBOARD_SC_KEYPAD_CLOSING_BRACE 0xB9
- #define HID_KEYBOARD_SC_KEYPAD_TAB 0xBA
- #define HID_KEYBOARD_SC_KEYPAD_BACKSPACE 0xBB
- #define HID_KEYBOARD_SC_KEYPAD_A 0xBC
- #define HID_KEYBOARD_SC_KEYPAD_B 0xBD
- #define HID_KEYBOARD_SC_KEYPAD_C 0xBE
- #define HID_KEYBOARD_SC_KEYPAD_D 0xBF
- #define HID_KEYBOARD_SC_KEYPAD_E 0xC0
- #define HID_KEYBOARD_SC_KEYPAD_F 0xC1
- #define HID_KEYBOARD_SC_KEYPAD_XOR 0xC2
- #define HID_KEYBOARD_SC_KEYPAD_CARET 0xC3
- #define HID_KEYBOARD_SC_KEYPAD_PERCENTAGE 0xC4
- #define HID_KEYBOARD_SC_KEYPAD_LESS_THAN_SIGN 0xC5
- #define HID_KEYBOARD_SC_KEYPAD_GREATER_THAN_SIGN 0xC6
- #define HID_KEYBOARD_SC_KEYPAD_AMP 0xC7
- #define HID_KEYBOARD_SC_KEYPAD_AMP_AMP 0xC8
- #define HID_KEYBOARD_SC_KEYPAD_PIPE 0xC9
- #define HID_KEYBOARD_SC_KEYPAD_PIPE_PIPE 0xCA
- #define HID_KEYBOARD_SC_KEYPAD_COLON 0xCB
- #define HID_KEYBOARD_SC_KEYPAD_HASHMARK 0xCC
- #define HID_KEYBOARD_SC_KEYPAD_SPACE 0xCD
- #define HID_KEYBOARD_SC_KEYPAD_AT 0xCE
- #define HID_KEYBOARD_SC_KEYPAD_EXCLAMATION_SIGN 0xCF
- #define HID_KEYBOARD_SC_KEYPAD_MEMORY_STORE 0xD0
- #define HID_KEYBOARD_SC_KEYPAD_MEMORY_RECALL 0xD1
- #define HID_KEYBOARD_SC_KEYPAD_MEMORY_CLEAR 0xD2
- #define HID_KEYBOARD_SC_KEYPAD_MEMORY_ADD 0xD3
- #define HID_KEYBOARD_SC_KEYPAD_MEMORY_SUBTRACT 0xD4
- #define HID_KEYBOARD_SC_KEYPAD_MEMORY_MULTIPLY 0xD5
- #define HID_KEYBOARD_SC_KEYPAD_MEMORY_DIVIDE 0xD6
- #define HID_KEYBOARD_SC_KEYPAD_PLUS_AND_MINUS 0xD7
- #define HID_KEYBOARD_SC_KEYPAD_CLEAR 0xD8
- #define HID_KEYBOARD_SC_KEYPAD_CLEAR_ENTRY 0xD9
- #define HID_KEYBOARD_SC_KEYPAD_BINARY 0xDA
- #define HID_KEYBOARD_SC_KEYPAD_OCTAL 0xDB
- #define HID_KEYBOARD_SC_KEYPAD_DECIMAL 0xDC
- #define HID_KEYBOARD_SC_KEYPAD_HEXADECIMAL 0xDD
- #define HID_KEYBOARD_SC_LEFT_CONTROL 0xE0
- #define HID_KEYBOARD_SC_LEFT_SHIFT 0xE1
- #define HID_KEYBOARD_SC_LEFT_ALT 0xE2
- #define HID_KEYBOARD_SC_LEFT_GUI 0xE3
- #define HID_KEYBOARD_SC_RIGHT_CONTROL 0xE4
- #define HID_KEYBOARD_SC_RIGHT_SHIFT 0xE5
- #define HID_KEYBOARD_SC_RIGHT_ALT 0xE6
- #define HID_KEYBOARD_SC_RIGHT_GUI 0xE7
- //@}
-
- /** \name Common HID Device Report Descriptors */
- //@{
- /** \hideinitializer
- * A list of HID report item array elements that describe a typical HID USB Joystick. The resulting report
- * descriptor is structured according to the following layout:
- *
- * \code
- * struct
- * {
- * intA_t X; // Signed X axis value
- * intA_t Y; // Signed Y axis value
- * intA_t Z; // Signed Z axis value
- * uintB_t Buttons; // Pressed buttons bitmask
- * } Joystick_Report;
- * \endcode
- *
- * Where \c uintA_t is a type large enough to hold the ranges of the signed \c MinAxisVal and \c MaxAxisVal values,
- * and \c intB_t is a type large enough to hold one bit per button.
- *
- * \param[in] MinAxisVal Minimum logical axis value (16-bit).
- * \param[in] MaxAxisVal Maximum logical axis value (16-bit).
- * \param[in] MinPhysicalVal Minimum physical axis value, for movement resolution calculations (16-bit).
- * \param[in] MaxPhysicalVal Maximum physical axis value, for movement resolution calculations (16-bit).
- * \param[in] Buttons Total number of buttons in the device (8-bit).
- */
- #define HID_DESCRIPTOR_JOYSTICK(MinAxisVal, MaxAxisVal, MinPhysicalVal, MaxPhysicalVal, Buttons) \
- HID_RI_USAGE_PAGE(8, 0x01), \
- HID_RI_USAGE(8, 0x04), \
- HID_RI_COLLECTION(8, 0x01), \
- HID_RI_USAGE(8, 0x01), \
- HID_RI_COLLECTION(8, 0x00), \
- HID_RI_USAGE(8, 0x30), \
- HID_RI_USAGE(8, 0x31), \
- HID_RI_USAGE(8, 0x32), \
- HID_RI_LOGICAL_MINIMUM(16, MinAxisVal), \
- HID_RI_LOGICAL_MAXIMUM(16, MaxAxisVal), \
- HID_RI_PHYSICAL_MINIMUM(16, MinPhysicalVal), \
- HID_RI_PHYSICAL_MAXIMUM(16, MaxPhysicalVal), \
- HID_RI_REPORT_COUNT(8, 3), \
- HID_RI_REPORT_SIZE(8, ((((MinAxisVal >= -0xFF) && (MaxAxisVal <= 0xFF)) ? 8 : 16))), \
- HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), \
- HID_RI_END_COLLECTION(0), \
- HID_RI_USAGE_PAGE(8, 0x09), \
- HID_RI_USAGE_MINIMUM(8, 0x01), \
- HID_RI_USAGE_MAXIMUM(8, Buttons), \
- HID_RI_LOGICAL_MINIMUM(8, 0x00), \
- HID_RI_LOGICAL_MAXIMUM(8, 0x01), \
- HID_RI_REPORT_SIZE(8, 0x01), \
- HID_RI_REPORT_COUNT(8, Buttons), \
- HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), \
- HID_RI_REPORT_SIZE(8, (8 - (Buttons % 8))), \
- HID_RI_REPORT_COUNT(8, 0x01), \
- HID_RI_INPUT(8, HID_IOF_CONSTANT), \
- HID_RI_END_COLLECTION(0)
-
- /** \hideinitializer
- * A list of HID report item array elements that describe a typical HID USB keyboard. The resulting report descriptor
- * is compatible with \ref USB_KeyboardReport_Data_t when \c MaxKeys is equal to 6. For other values, the report will
- * be structured according to the following layout:
- *
- * \code
- * struct
- * {
- * uint8_t Modifier; // Keyboard modifier byte indicating pressed modifier keys (\c HID_KEYBOARD_MODIFER_* masks)
- * uint8_t Reserved; // Reserved for OEM use, always set to 0.
- * uint8_t KeyCode[MaxKeys]; // Length determined by the number of keys that can be reported
- * } Keyboard_Report;
- * \endcode
- *
- * \param[in] MaxKeys Number of simultaneous keys that can be reported at the one time (8-bit).
- */
- #define HID_DESCRIPTOR_KEYBOARD(MaxKeys) \
- HID_RI_USAGE_PAGE(8, 0x01), \
- HID_RI_USAGE(8, 0x06), \
- HID_RI_COLLECTION(8, 0x01), \
- HID_RI_USAGE_PAGE(8, 0x07), \
- HID_RI_USAGE_MINIMUM(8, 0xE0), \
- HID_RI_USAGE_MAXIMUM(8, 0xE7), \
- HID_RI_LOGICAL_MINIMUM(8, 0x00), \
- HID_RI_LOGICAL_MAXIMUM(8, 0x01), \
- HID_RI_REPORT_SIZE(8, 0x01), \
- HID_RI_REPORT_COUNT(8, 0x08), \
- HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), \
- HID_RI_REPORT_COUNT(8, 0x01), \
- HID_RI_REPORT_SIZE(8, 0x08), \
- HID_RI_INPUT(8, HID_IOF_CONSTANT), \
- HID_RI_USAGE_PAGE(8, 0x08), \
- HID_RI_USAGE_MINIMUM(8, 0x01), \
- HID_RI_USAGE_MAXIMUM(8, 0x05), \
- HID_RI_REPORT_COUNT(8, 0x05), \
- HID_RI_REPORT_SIZE(8, 0x01), \
- HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), \
- HID_RI_REPORT_COUNT(8, 0x01), \
- HID_RI_REPORT_SIZE(8, 0x03), \
- HID_RI_OUTPUT(8, HID_IOF_CONSTANT), \
- HID_RI_LOGICAL_MINIMUM(8, 0x00), \
- HID_RI_LOGICAL_MAXIMUM(8, 0x65), \
- HID_RI_USAGE_PAGE(8, 0x07), \
- HID_RI_USAGE_MINIMUM(8, 0x00), \
- HID_RI_USAGE_MAXIMUM(8, 0x65), \
- HID_RI_REPORT_COUNT(8, MaxKeys), \
- HID_RI_REPORT_SIZE(8, 0x08), \
- HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE), \
- HID_RI_END_COLLECTION(0)
-
- /** \hideinitializer
- * A list of HID report item array elements that describe a typical HID USB mouse. The resulting report descriptor
- * is compatible with \ref USB_MouseReport_Data_t if the \c MinAxisVal and \c MaxAxisVal values fit within a \c int8_t range
- * and the number of Buttons is less than 8. For other values, the report is structured according to the following layout:
- *
- * \code
- * struct
- * {
- * uintA_t Buttons; // Pressed buttons bitmask
- * intB_t X; // X axis value
- * intB_t Y; // Y axis value
- * } Mouse_Report;
- * \endcode
- *
- * Where \c intA_t is a type large enough to hold one bit per button, and \c intB_t is a type large enough to hold the
- * ranges of the signed \c MinAxisVal and \c MaxAxisVal values.
- *
- * \param[in] MinAxisVal Minimum X/Y logical axis value (16-bit).
- * \param[in] MaxAxisVal Maximum X/Y logical axis value (16-bit).
- * \param[in] MinPhysicalVal Minimum X/Y physical axis value, for movement resolution calculations (16-bit).
- * \param[in] MaxPhysicalVal Maximum X/Y physical axis value, for movement resolution calculations (16-bit).
- * \param[in] Buttons Total number of buttons in the device (8-bit).
- * \param[in] AbsoluteCoords Boolean \c true to use absolute X/Y coordinates (e.g. touchscreen).
- */
- #define HID_DESCRIPTOR_MOUSE(MinAxisVal, MaxAxisVal, MinPhysicalVal, MaxPhysicalVal, Buttons, AbsoluteCoords) \
- HID_RI_USAGE_PAGE(8, 0x01), \
- HID_RI_USAGE(8, 0x02), \
- HID_RI_COLLECTION(8, 0x01), \
- HID_RI_USAGE(8, 0x01), \
- HID_RI_COLLECTION(8, 0x00), \
- HID_RI_USAGE_PAGE(8, 0x09), \
- HID_RI_USAGE_MINIMUM(8, 0x01), \
- HID_RI_USAGE_MAXIMUM(8, Buttons), \
- HID_RI_LOGICAL_MINIMUM(8, 0x00), \
- HID_RI_LOGICAL_MAXIMUM(8, 0x01), \
- HID_RI_REPORT_COUNT(8, Buttons), \
- HID_RI_REPORT_SIZE(8, 0x01), \
- HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), \
- HID_RI_REPORT_COUNT(8, 0x01), \
- HID_RI_REPORT_SIZE(8, (8 - (Buttons % 8))), \
- HID_RI_INPUT(8, HID_IOF_CONSTANT), \
- HID_RI_USAGE_PAGE(8, 0x01), \
- HID_RI_USAGE(8, 0x30), \
- HID_RI_USAGE(8, 0x31), \
- HID_RI_LOGICAL_MINIMUM(16, MinAxisVal), \
- HID_RI_LOGICAL_MAXIMUM(16, MaxAxisVal), \
- HID_RI_PHYSICAL_MINIMUM(16, MinPhysicalVal), \
- HID_RI_PHYSICAL_MAXIMUM(16, MaxPhysicalVal), \
- HID_RI_REPORT_COUNT(8, 0x02), \
- HID_RI_REPORT_SIZE(8, ((((MinAxisVal >= -0xFF) && (MaxAxisVal <= 0xFF)) ? 8 : 16))), \
- HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | (AbsoluteCoords ? HID_IOF_ABSOLUTE : HID_IOF_RELATIVE)), \
- HID_RI_END_COLLECTION(0), \
- HID_RI_END_COLLECTION(0)
-
- /** \hideinitializer
- * A list of HID report item array elements that describe a typical Vendor Defined byte array HID report descriptor,
- * used for transporting arbitrary data between the USB host and device via HID reports. The resulting report should be
- * a \c uint8_t byte array of the specified length in both Device to Host (IN) and Host to Device (OUT) directions.
- *
- * \param[in] VendorPageNum Vendor Defined HID Usage Page index, ranging from 0x00 to 0xFF.
- * \param[in] CollectionUsage Vendor Usage for the encompassing report IN and OUT collection, ranging from 0x00 to 0xFF.
- * \param[in] DataINUsage Vendor Usage for the IN report data, ranging from 0x00 to 0xFF.
- * \param[in] DataOUTUsage Vendor Usage for the OUT report data, ranging from 0x00 to 0xFF.
- * \param[in] NumBytes Length of the data IN and OUT reports.
- */
- #define HID_DESCRIPTOR_VENDOR(VendorPageNum, CollectionUsage, DataINUsage, DataOUTUsage, NumBytes) \
- HID_RI_USAGE_PAGE(16, (0xFF00 | VendorPageNum)), \
- HID_RI_USAGE(8, CollectionUsage), \
- HID_RI_COLLECTION(8, 0x01), \
- HID_RI_USAGE(8, DataINUsage), \
- HID_RI_LOGICAL_MINIMUM(8, 0x00), \
- HID_RI_LOGICAL_MAXIMUM(8, 0xFF), \
- HID_RI_REPORT_SIZE(8, 0x08), \
- HID_RI_REPORT_COUNT(8, NumBytes), \
- HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), \
- HID_RI_USAGE(8, DataOUTUsage), \
- HID_RI_LOGICAL_MINIMUM(8, 0x00), \
- HID_RI_LOGICAL_MAXIMUM(8, 0xFF), \
- HID_RI_REPORT_SIZE(8, 0x08), \
- HID_RI_REPORT_COUNT(8, NumBytes), \
- HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), \
- HID_RI_END_COLLECTION(0)
- //@}
-
- /* Type Defines: */
- /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the HID
- * device class.
- */
- enum HID_Descriptor_ClassSubclassProtocol_t
- {
- HID_CSCP_HIDClass = 0x03, /**< Descriptor Class value indicating that the device or interface
- * belongs to the HID class.
- */
- HID_CSCP_NonBootSubclass = 0x00, /**< Descriptor Subclass value indicating that the device or interface
- * does not implement a HID boot protocol.
- */
- HID_CSCP_BootSubclass = 0x01, /**< Descriptor Subclass value indicating that the device or interface
- * implements a HID boot protocol.
- */
- HID_CSCP_NonBootProtocol = 0x00, /**< Descriptor Protocol value indicating that the device or interface
- * does not belong to a HID boot protocol.
- */
- HID_CSCP_KeyboardBootProtocol = 0x01, /**< Descriptor Protocol value indicating that the device or interface
- * belongs to the Keyboard HID boot protocol.
- */
- HID_CSCP_MouseBootProtocol = 0x02, /**< Descriptor Protocol value indicating that the device or interface
- * belongs to the Mouse HID boot protocol.
- */
- };
-
- /** Enum for the HID class specific control requests that can be issued by the USB bus host. */
- enum HID_ClassRequests_t
- {
- HID_REQ_GetReport = 0x01, /**< HID class-specific Request to get the current HID report from the device. */
- HID_REQ_GetIdle = 0x02, /**< HID class-specific Request to get the current device idle count. */
- HID_REQ_GetProtocol = 0x03, /**< HID class-specific Request to get the current HID report protocol mode. */
- HID_REQ_SetReport = 0x09, /**< HID class-specific Request to set the current HID report to the device. */
- HID_REQ_SetIdle = 0x0A, /**< HID class-specific Request to set the device's idle count. */
- HID_REQ_SetProtocol = 0x0B, /**< HID class-specific Request to set the current HID report protocol mode. */
- };
-
- /** Enum for the HID class specific descriptor types. */
- enum HID_DescriptorTypes_t
- {
- HID_DTYPE_HID = 0x21, /**< Descriptor header type value, to indicate a HID class HID descriptor. */
- HID_DTYPE_Report = 0x22, /**< Descriptor header type value, to indicate a HID class HID report descriptor. */
- };
-
- /** Enum for the different types of HID reports. */
- enum HID_ReportItemTypes_t
- {
- HID_REPORT_ITEM_In = 0, /**< Indicates that the item is an IN report type. */
- HID_REPORT_ITEM_Out = 1, /**< Indicates that the item is an OUT report type. */
- HID_REPORT_ITEM_Feature = 2, /**< Indicates that the item is a FEATURE report type. */
- };
-
- /** \brief HID class-specific HID Descriptor (LUFA naming conventions).
- *
- * Type define for the HID class-specific HID descriptor, to describe the HID device's specifications. Refer to the HID
- * specification for details on the structure elements.
- *
- * \see \ref USB_HID_StdDescriptor_HID_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
-
- uint16_t HIDSpec; /**< BCD encoded version that the HID descriptor and device complies to. */
- uint8_t CountryCode; /**< Country code of the localized device, or zero if universal. */
-
- uint8_t TotalReportDescriptors; /**< Total number of HID report descriptors for the interface. */
-
- uint8_t HIDReportType; /**< Type of HID report, set to \ref HID_DTYPE_Report. */
- uint16_t HIDReportLength; /**< Length of the associated HID report descriptor, in bytes. */
- } ATTR_PACKED USB_HID_Descriptor_HID_t;
-
- /** \brief HID class-specific HID Descriptor (USB-IF naming conventions).
- *
- * Type define for the HID class-specific HID descriptor, to describe the HID device's specifications. Refer to the HID
- * specification for details on the structure elements.
- *
- * \see \ref USB_HID_Descriptor_HID_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
-
- uint16_t bcdHID; /**< BCD encoded version that the HID descriptor and device complies to. */
- uint8_t bCountryCode; /**< Country code of the localized device, or zero if universal. */
-
- uint8_t bNumDescriptors; /**< Total number of HID report descriptors for the interface. */
-
- uint8_t bDescriptorType2; /**< Type of HID report, set to \ref HID_DTYPE_Report. */
- uint16_t wDescriptorLength; /**< Length of the associated HID report descriptor, in bytes. */
- } ATTR_PACKED USB_HID_StdDescriptor_HID_t;
-
- /** \brief Standard HID Boot Protocol Mouse Report.
- *
- * Type define for a standard Boot Protocol Mouse report
- */
- typedef struct
- {
- uint8_t Button; /**< Button mask for currently pressed buttons in the mouse. */
- int8_t X; /**< Current delta X movement of the mouse. */
- int8_t Y; /**< Current delta Y movement on the mouse. */
- } ATTR_PACKED USB_MouseReport_Data_t;
-
- /** \brief Standard HID Boot Protocol Keyboard Report.
- *
- * Type define for a standard Boot Protocol Keyboard report
- */
- typedef struct
- {
- uint8_t Modifier; /**< Keyboard modifier byte, indicating pressed modifier keys (a combination of
- * \c HID_KEYBOARD_MODIFER_* masks).
- */
- uint8_t Reserved; /**< Reserved for OEM use, always set to 0. */
- uint8_t KeyCode[6]; /**< Key codes of the currently pressed keys. */
- } ATTR_PACKED USB_KeyboardReport_Data_t;
-
- /** Type define for the data type used to store HID report descriptor elements. */
- typedef uint8_t USB_Descriptor_HIDReport_Datatype_t;
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDParser.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDParser.c deleted file mode 100644 index f57d97b56..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDParser.c +++ /dev/null @@ -1,363 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#define __INCLUDE_FROM_HID_DRIVER
-#include "HIDParser.h"
-
-uint8_t USB_ProcessHIDReport(const uint8_t* ReportData,
- uint16_t ReportSize,
- HID_ReportInfo_t* const ParserData)
-{
- HID_StateTable_t StateTable[HID_STATETABLE_STACK_DEPTH];
- HID_StateTable_t* CurrStateTable = &StateTable[0];
- HID_CollectionPath_t* CurrCollectionPath = NULL;
- HID_ReportSizeInfo_t* CurrReportIDInfo = &ParserData->ReportIDSizes[0];
- uint16_t UsageList[HID_USAGE_STACK_DEPTH];
- uint8_t UsageListSize = 0;
- HID_MinMax_t UsageMinMax = {0, 0};
-
- memset(ParserData, 0x00, sizeof(HID_ReportInfo_t));
- memset(CurrStateTable, 0x00, sizeof(HID_StateTable_t));
- memset(CurrReportIDInfo, 0x00, sizeof(HID_ReportSizeInfo_t));
-
- ParserData->TotalDeviceReports = 1;
-
- while (ReportSize)
- {
- uint8_t HIDReportItem = *ReportData;
- uint32_t ReportItemData = 0;
-
- ReportData++;
- ReportSize--;
-
- switch (HIDReportItem & HID_RI_DATA_SIZE_MASK)
- {
- case HID_RI_DATA_BITS_32:
- ReportItemData = (((uint32_t)ReportData[3] << 24) | ((uint32_t)ReportData[2] << 16) |
- ((uint16_t)ReportData[1] << 8) | ReportData[0]);
- ReportSize -= 4;
- ReportData += 4;
- break;
- case HID_RI_DATA_BITS_16:
- ReportItemData = (((uint16_t)ReportData[1] << 8) | (ReportData[0]));
- ReportSize -= 2;
- ReportData += 2;
- break;
- case HID_RI_DATA_BITS_8:
- ReportItemData = ReportData[0];
- ReportSize -= 1;
- ReportData += 1;
- break;
- }
-
- switch (HIDReportItem & (HID_RI_TYPE_MASK | HID_RI_TAG_MASK))
- {
- case HID_RI_PUSH(0):
- if (CurrStateTable == &StateTable[HID_STATETABLE_STACK_DEPTH - 1])
- return HID_PARSE_HIDStackOverflow;
-
- memcpy((CurrStateTable + 1),
- CurrStateTable,
- sizeof(HID_ReportItem_t));
-
- CurrStateTable++;
- break;
- case HID_RI_POP(0):
- if (CurrStateTable == &StateTable[0])
- return HID_PARSE_HIDStackUnderflow;
-
- CurrStateTable--;
- break;
- case HID_RI_USAGE_PAGE(0):
- if ((HIDReportItem & HID_RI_DATA_SIZE_MASK) == HID_RI_DATA_BITS_32)
- CurrStateTable->Attributes.Usage.Page = (ReportItemData >> 16);
-
- CurrStateTable->Attributes.Usage.Page = ReportItemData;
- break;
- case HID_RI_LOGICAL_MINIMUM(0):
- CurrStateTable->Attributes.Logical.Minimum = ReportItemData;
- break;
- case HID_RI_LOGICAL_MAXIMUM(0):
- CurrStateTable->Attributes.Logical.Maximum = ReportItemData;
- break;
- case HID_RI_PHYSICAL_MINIMUM(0):
- CurrStateTable->Attributes.Physical.Minimum = ReportItemData;
- break;
- case HID_RI_PHYSICAL_MAXIMUM(0):
- CurrStateTable->Attributes.Physical.Maximum = ReportItemData;
- break;
- case HID_RI_UNIT_EXPONENT(0):
- CurrStateTable->Attributes.Unit.Exponent = ReportItemData;
- break;
- case HID_RI_UNIT(0):
- CurrStateTable->Attributes.Unit.Type = ReportItemData;
- break;
- case HID_RI_REPORT_SIZE(0):
- CurrStateTable->Attributes.BitSize = ReportItemData;
- break;
- case HID_RI_REPORT_COUNT(0):
- CurrStateTable->ReportCount = ReportItemData;
- break;
- case HID_RI_REPORT_ID(0):
- CurrStateTable->ReportID = ReportItemData;
-
- if (ParserData->UsingReportIDs)
- {
- CurrReportIDInfo = NULL;
-
- for (uint8_t i = 0; i < ParserData->TotalDeviceReports; i++)
- {
- if (ParserData->ReportIDSizes[i].ReportID == CurrStateTable->ReportID)
- {
- CurrReportIDInfo = &ParserData->ReportIDSizes[i];
- break;
- }
- }
-
- if (CurrReportIDInfo == NULL)
- {
- if (ParserData->TotalDeviceReports == HID_MAX_REPORT_IDS)
- return HID_PARSE_InsufficientReportIDItems;
-
- CurrReportIDInfo = &ParserData->ReportIDSizes[ParserData->TotalDeviceReports++];
- memset(CurrReportIDInfo, 0x00, sizeof(HID_ReportSizeInfo_t));
- }
- }
-
- ParserData->UsingReportIDs = true;
-
- CurrReportIDInfo->ReportID = CurrStateTable->ReportID;
- break;
- case HID_RI_USAGE(0):
- if (UsageListSize == HID_USAGE_STACK_DEPTH)
- return HID_PARSE_UsageListOverflow;
-
- UsageList[UsageListSize++] = ReportItemData;
- break;
- case HID_RI_USAGE_MINIMUM(0):
- UsageMinMax.Minimum = ReportItemData;
- break;
- case HID_RI_USAGE_MAXIMUM(0):
- UsageMinMax.Maximum = ReportItemData;
- break;
- case HID_RI_COLLECTION(0):
- if (CurrCollectionPath == NULL)
- {
- CurrCollectionPath = &ParserData->CollectionPaths[0];
- }
- else
- {
- HID_CollectionPath_t* ParentCollectionPath = CurrCollectionPath;
-
- CurrCollectionPath = &ParserData->CollectionPaths[1];
-
- while (CurrCollectionPath->Parent != NULL)
- {
- if (CurrCollectionPath == &ParserData->CollectionPaths[HID_MAX_COLLECTIONS - 1])
- return HID_PARSE_InsufficientCollectionPaths;
-
- CurrCollectionPath++;
- }
-
- CurrCollectionPath->Parent = ParentCollectionPath;
- }
-
- CurrCollectionPath->Type = ReportItemData;
- CurrCollectionPath->Usage.Page = CurrStateTable->Attributes.Usage.Page;
-
- if (UsageListSize)
- {
- CurrCollectionPath->Usage.Usage = UsageList[0];
-
- for (uint8_t i = 0; i < UsageListSize; i++)
- UsageList[i] = UsageList[i + 1];
-
- UsageListSize--;
- }
- else if (UsageMinMax.Minimum <= UsageMinMax.Maximum)
- {
- CurrCollectionPath->Usage.Usage = UsageMinMax.Minimum++;
- }
-
- break;
- case HID_RI_END_COLLECTION(0):
- if (CurrCollectionPath == NULL)
- return HID_PARSE_UnexpectedEndCollection;
-
- CurrCollectionPath = CurrCollectionPath->Parent;
- break;
- case HID_RI_INPUT(0):
- case HID_RI_OUTPUT(0):
- case HID_RI_FEATURE(0):
- for (uint8_t ReportItemNum = 0; ReportItemNum < CurrStateTable->ReportCount; ReportItemNum++)
- {
- HID_ReportItem_t NewReportItem;
-
- memcpy(&NewReportItem.Attributes,
- &CurrStateTable->Attributes,
- sizeof(HID_ReportItem_Attributes_t));
-
- NewReportItem.ItemFlags = ReportItemData;
- NewReportItem.CollectionPath = CurrCollectionPath;
- NewReportItem.ReportID = CurrStateTable->ReportID;
-
- if (UsageListSize)
- {
- NewReportItem.Attributes.Usage.Usage = UsageList[0];
-
- for (uint8_t i = 0; i < UsageListSize; i++)
- UsageList[i] = UsageList[i + 1];
-
- UsageListSize--;
- }
- else if (UsageMinMax.Minimum <= UsageMinMax.Maximum)
- {
- NewReportItem.Attributes.Usage.Usage = UsageMinMax.Minimum++;
- }
-
- uint8_t ItemTypeTag = (HIDReportItem & (HID_RI_TYPE_MASK | HID_RI_TAG_MASK));
-
- if (ItemTypeTag == HID_RI_INPUT(0))
- NewReportItem.ItemType = HID_REPORT_ITEM_In;
- else if (ItemTypeTag == HID_RI_OUTPUT(0))
- NewReportItem.ItemType = HID_REPORT_ITEM_Out;
- else
- NewReportItem.ItemType = HID_REPORT_ITEM_Feature;
-
- NewReportItem.BitOffset = CurrReportIDInfo->ReportSizeBits[NewReportItem.ItemType];
-
- CurrReportIDInfo->ReportSizeBits[NewReportItem.ItemType] += CurrStateTable->Attributes.BitSize;
-
- ParserData->LargestReportSizeBits = MAX(ParserData->LargestReportSizeBits, CurrReportIDInfo->ReportSizeBits[NewReportItem.ItemType]);
-
- if (ParserData->TotalReportItems == HID_MAX_REPORTITEMS)
- return HID_PARSE_InsufficientReportItems;
-
- memcpy(&ParserData->ReportItems[ParserData->TotalReportItems],
- &NewReportItem, sizeof(HID_ReportItem_t));
-
- if (!(ReportItemData & HID_IOF_CONSTANT) && CALLBACK_HIDParser_FilterHIDReportItem(&NewReportItem))
- ParserData->TotalReportItems++;
- }
-
- break;
- }
-
- if ((HIDReportItem & HID_RI_TYPE_MASK) == HID_RI_TYPE_MAIN)
- {
- UsageMinMax.Minimum = 0;
- UsageMinMax.Maximum = 0;
- UsageListSize = 0;
- }
- }
-
- if (!(ParserData->TotalReportItems))
- return HID_PARSE_NoUnfilteredReportItems;
-
- return HID_PARSE_Successful;
-}
-
-bool USB_GetHIDReportItemInfo(const uint8_t* ReportData,
- HID_ReportItem_t* const ReportItem)
-{
- if (ReportItem == NULL)
- return false;
-
- uint16_t DataBitsRem = ReportItem->Attributes.BitSize;
- uint16_t CurrentBit = ReportItem->BitOffset;
- uint32_t BitMask = (1 << 0);
-
- if (ReportItem->ReportID)
- {
- if (ReportItem->ReportID != ReportData[0])
- return false;
-
- ReportData++;
- }
-
- ReportItem->PreviousValue = ReportItem->Value;
- ReportItem->Value = 0;
-
- while (DataBitsRem--)
- {
- if (ReportData[CurrentBit / 8] & (1 << (CurrentBit % 8)))
- ReportItem->Value |= BitMask;
-
- CurrentBit++;
- BitMask <<= 1;
- }
-
- return true;
-}
-
-void USB_SetHIDReportItemInfo(uint8_t* ReportData,
- HID_ReportItem_t* const ReportItem)
-{
- if (ReportItem == NULL)
- return;
-
- uint16_t DataBitsRem = ReportItem->Attributes.BitSize;
- uint16_t CurrentBit = ReportItem->BitOffset;
- uint32_t BitMask = (1 << 0);
-
- if (ReportItem->ReportID)
- {
- ReportData[0] = ReportItem->ReportID;
- ReportData++;
- }
-
- ReportItem->PreviousValue = ReportItem->Value;
-
- while (DataBitsRem--)
- {
- if (ReportItem->Value & (1 << (CurrentBit % 8)))
- ReportData[CurrentBit / 8] |= BitMask;
-
- CurrentBit++;
- BitMask <<= 1;
- }
-}
-
-uint16_t USB_GetHIDReportSize(HID_ReportInfo_t* const ParserData,
- const uint8_t ReportID,
- const uint8_t ReportType)
-{
- for (uint8_t i = 0; i < HID_MAX_REPORT_IDS; i++)
- {
- uint16_t ReportSizeBits = ParserData->ReportIDSizes[i].ReportSizeBits[ReportType];
-
- if (ParserData->ReportIDSizes[i].ReportID == ReportID)
- return (ReportSizeBits / 8) + ((ReportSizeBits % 8) ? 1 : 0);
- }
-
- return 0;
-}
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDParser.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDParser.h deleted file mode 100644 index dd14bea43..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDParser.h +++ /dev/null @@ -1,364 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Human Interface Device (HID) Class report descriptor parser.
- *
- * This file allows for the easy parsing of complex HID report descriptors, which describes the data that
- * a HID device transmits to the host. It also provides an easy API for extracting and processing the data
- * elements inside a HID report sent from an attached HID device.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_HIDParser HID Report Parser
- * \brief USB Human Interface Device (HID) Class report descriptor parser.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/HIDParser.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- *
- * \section Sec_ModDescription Module Description
- * Human Interface Device (HID) class report descriptor parser. This module implements a parser than is
- * capable of processing a complete HID report descriptor, and outputting a flat structure containing the
- * contents of the report in an a more friendly format. The parsed data may then be further processed and used
- * within an application to process sent and received HID reports to and from an attached HID device.
- *
- * A HID report descriptor consists of a set of HID report items, which describe the function and layout
- * of data exchanged between a HID device and a host, including both the physical encoding of each item
- * (such as a button, key press or joystick axis) in the sent and received data packets - known as "reports" -
- * as well as other information about each item such as the usages, data range, physical location and other
- * characteristics. In this way a HID device can retain a high degree of flexibility in its capabilities, as it
- * is not forced to comply with a given report layout or feature-set.
- *
- * This module also contains routines for the processing of data in an actual HID report, using the parsed report
- * descriptor data as a guide for the encoding.
- *
- * @{
- */
-
-#ifndef __HIDPARSER_H__
-#define __HIDPARSER_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- #include "HIDReportData.h"
- #include "HIDClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Macros: */
- #if !defined(HID_STATETABLE_STACK_DEPTH) || defined(__DOXYGEN__)
- /** Constant indicating the maximum stack depth of the state table. A larger state table
- * allows for more PUSH/POP report items to be nested, but consumes more memory. By default
- * this is set to 2 levels (allowing non-nested PUSH items) but this can be overridden by
- * defining \c HID_STATETABLE_STACK_DEPTH to another value in the user project makefile, passing the
- * define to the compiler using the -D compiler switch.
- */
- #define HID_STATETABLE_STACK_DEPTH 2
- #endif
-
- #if !defined(HID_USAGE_STACK_DEPTH) || defined(__DOXYGEN__)
- /** Constant indicating the maximum stack depth of the usage table. A larger usage table
- * allows for more USAGE items to be indicated sequentially for REPORT COUNT entries of more than
- * one, but requires more stack space. By default this is set to 8 levels (allowing for a report
- * item with a count of 8) but this can be overridden by defining \c HID_USAGE_STACK_DEPTH to another
- * value in the user project makefile, passing the define to the compiler using the -D compiler
- * switch.
- */
- #define HID_USAGE_STACK_DEPTH 8
- #endif
-
- #if !defined(HID_MAX_COLLECTIONS) || defined(__DOXYGEN__)
- /** Constant indicating the maximum number of COLLECTION items (nested or unnested) that can be
- * processed in the report item descriptor. A large value allows for more COLLECTION items to be
- * processed, but consumes more memory. By default this is set to 10 collections, but this can be
- * overridden by defining \c HID_MAX_COLLECTIONS to another value in the user project makefile, passing
- * the define to the compiler using the -D compiler switch.
- */
- #define HID_MAX_COLLECTIONS 10
- #endif
-
- #if !defined(HID_MAX_REPORTITEMS) || defined(__DOXYGEN__)
- /** Constant indicating the maximum number of report items (IN, OUT or FEATURE) that can be processed
- * in the report item descriptor and stored in the user HID Report Info structure. A large value allows
- * for more report items to be stored, but consumes more memory. By default this is set to 20 items,
- * but this can be overridden by defining \c HID_MAX_REPORTITEMS to another value in the user project
- * makefile, and passing the define to the compiler using the -D compiler switch.
- */
- #define HID_MAX_REPORTITEMS 20
- #endif
-
- #if !defined(HID_MAX_REPORT_IDS) || defined(__DOXYGEN__)
- /** Constant indicating the maximum number of unique report IDs that can be processed in the report item
- * descriptor for the report size information array in the user HID Report Info structure. A large value
- * allows for more report ID report sizes to be stored, but consumes more memory. By default this is set
- * to 10 items, but this can be overridden by defining \c HID_MAX_REPORT_IDS to another value in the user project
- * makefile, and passing the define to the compiler using the -D compiler switch. Note that IN, OUT and FEATURE
- * items sharing the same report ID consume only one size item in the array.
- */
- #define HID_MAX_REPORT_IDS 10
- #endif
-
- /** Returns the value a given HID report item (once its value has been fetched via \ref USB_GetHIDReportItemInfo())
- * left-aligned to the given data type. This allows for signed data to be interpreted correctly, by shifting the data
- * leftwards until the data's sign bit is in the correct position.
- *
- * \param[in] ReportItem HID Report Item whose retrieved value is to be aligned.
- * \param[in] Type Data type to align the HID report item's value to.
- *
- * \return Left-aligned data of the given report item's pre-retrieved value for the given datatype.
- */
- #define HID_ALIGN_DATA(ReportItem, Type) ((Type)(ReportItem->Value << ((8 * sizeof(Type)) - ReportItem->Attributes.BitSize)))
-
- /* Public Interface - May be used in end-application: */
- /* Enums: */
- /** Enum for the possible error codes in the return value of the \ref USB_ProcessHIDReport() function. */
- enum HID_Parse_ErrorCodes_t
- {
- HID_PARSE_Successful = 0, /**< Successful parse of the HID report descriptor, no error. */
- HID_PARSE_HIDStackOverflow = 1, /**< More than \ref HID_STATETABLE_STACK_DEPTH nested PUSHes in the report. */
- HID_PARSE_HIDStackUnderflow = 2, /**< A POP was found when the state table stack was empty. */
- HID_PARSE_InsufficientReportItems = 3, /**< More than \ref HID_MAX_REPORTITEMS report items in the report. */
- HID_PARSE_UnexpectedEndCollection = 4, /**< An END COLLECTION item found without matching COLLECTION item. */
- HID_PARSE_InsufficientCollectionPaths = 5, /**< More than \ref HID_MAX_COLLECTIONS collections in the report. */
- HID_PARSE_UsageListOverflow = 6, /**< More than \ref HID_USAGE_STACK_DEPTH usages listed in a row. */
- HID_PARSE_InsufficientReportIDItems = 7, /**< More than \ref HID_MAX_REPORT_IDS report IDs in the device. */
- HID_PARSE_NoUnfilteredReportItems = 8, /**< All report items from the device were filtered by the filtering callback routine. */
- };
-
- /* Type Defines: */
- /** \brief HID Parser Report Item Min/Max Structure.
- *
- * Type define for an attribute with both minimum and maximum values (e.g. Logical Min/Max).
- */
- typedef struct
- {
- uint32_t Minimum; /**< Minimum value for the attribute. */
- uint32_t Maximum; /**< Maximum value for the attribute. */
- } HID_MinMax_t;
-
- /** \brief HID Parser Report Item Unit Structure.
- *
- * Type define for the Unit attributes of a report item.
- */
- typedef struct
- {
- uint32_t Type; /**< Unit type (refer to HID specifications for details). */
- uint8_t Exponent; /**< Unit exponent (refer to HID specifications for details). */
- } HID_Unit_t;
-
- /** \brief HID Parser Report Item Usage Structure.
- *
- * Type define for the Usage attributes of a report item.
- */
- typedef struct
- {
- uint16_t Page; /**< Usage page of the report item. */
- uint16_t Usage; /**< Usage of the report item. */
- } HID_Usage_t;
-
- /** \brief HID Parser Report Item Collection Path Structure.
- *
- * Type define for a COLLECTION object. Contains the collection attributes and a reference to the
- * parent collection if any.
- */
- typedef struct HID_CollectionPath
- {
- uint8_t Type; /**< Collection type (e.g. "Generic Desktop"). */
- HID_Usage_t Usage; /**< Collection usage. */
- struct HID_CollectionPath* Parent; /**< Reference to parent collection, or \c NULL if root collection. */
- } HID_CollectionPath_t;
-
- /** \brief HID Parser Report Item Attributes Structure.
- *
- * Type define for all the data attributes of a report item, except flags.
- */
- typedef struct
- {
- uint8_t BitSize; /**< Size in bits of the report item's data. */
-
- HID_Usage_t Usage; /**< Usage of the report item. */
- HID_Unit_t Unit; /**< Unit type and exponent of the report item. */
- HID_MinMax_t Logical; /**< Logical minimum and maximum of the report item. */
- HID_MinMax_t Physical; /**< Physical minimum and maximum of the report item. */
- } HID_ReportItem_Attributes_t;
-
- /** \brief HID Parser Report Item Details Structure.
- *
- * Type define for a report item (IN, OUT or FEATURE) layout attributes and other details.
- */
- typedef struct
- {
- uint16_t BitOffset; /**< Bit offset in the IN, OUT or FEATURE report of the item. */
- uint8_t ItemType; /**< Report item type, a value in \ref HID_ReportItemTypes_t. */
- uint16_t ItemFlags; /**< Item data flags, a mask of \c HID_IOF_* constants. */
- uint8_t ReportID; /**< Report ID this item belongs to, or 0x00 if device has only one report */
- HID_CollectionPath_t* CollectionPath; /**< Collection path of the item. */
-
- HID_ReportItem_Attributes_t Attributes; /**< Report item attributes. */
-
- uint32_t Value; /**< Current value of the report item - use \ref HID_ALIGN_DATA() when processing
- * a retrieved value so that it is aligned to a specific type.
- */
- uint32_t PreviousValue; /**< Previous value of the report item. */
- } HID_ReportItem_t;
-
- /** \brief HID Parser Report Size Structure.
- *
- * Type define for a report item size information structure, to retain the size of a device's reports by ID.
- */
- typedef struct
- {
- uint8_t ReportID; /**< Report ID of the report within the HID interface. */
- uint16_t ReportSizeBits[3]; /**< Total number of bits in each report type for the given Report ID,
- * indexed by the \ref HID_ReportItemTypes_t enum.
- */
- } HID_ReportSizeInfo_t;
-
- /** \brief HID Parser State Structure.
- *
- * Type define for a complete processed HID report, including all report item data and collections.
- */
- typedef struct
- {
- uint8_t TotalReportItems; /**< Total number of report items stored in the \c ReportItems array. */
- HID_ReportItem_t ReportItems[HID_MAX_REPORTITEMS]; /**< Report items array, including all IN, OUT
- * and FEATURE items.
- */
- HID_CollectionPath_t CollectionPaths[HID_MAX_COLLECTIONS]; /**< All collection items, referenced
- * by the report items.
- */
- uint8_t TotalDeviceReports; /**< Number of reports within the HID interface */
- HID_ReportSizeInfo_t ReportIDSizes[HID_MAX_REPORT_IDS]; /**< Report sizes for each report in the interface */
- uint16_t LargestReportSizeBits; /**< Largest report that the attached device will generate, in bits */
- bool UsingReportIDs; /**< Indicates if the device has at least one REPORT ID
- * element in its HID report descriptor.
- */
- } HID_ReportInfo_t;
-
- /* Function Prototypes: */
- /** Function to process a given HID report returned from an attached device, and store it into a given
- * \ref HID_ReportInfo_t structure.
- *
- * \param[in] ReportData Buffer containing the device's HID report table.
- * \param[in] ReportSize Size in bytes of the HID report table.
- * \param[out] ParserData Pointer to a \ref HID_ReportInfo_t instance for the parser output.
- *
- * \return A value in the \ref HID_Parse_ErrorCodes_t enum.
- */
- uint8_t USB_ProcessHIDReport(const uint8_t* ReportData,
- uint16_t ReportSize,
- HID_ReportInfo_t* const ParserData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Extracts the given report item's value out of the given HID report and places it into the Value
- * member of the report item's \ref HID_ReportItem_t structure.
- *
- * When called on a report with an item that exists in that report, this copies the report item's \c Value
- * to its \c PreviousValue element for easy checking to see if an item's value has changed before processing
- * a report. If the given item does not exist in the report, the function does not modify the report item's
- * data.
- *
- * \param[in] ReportData Buffer containing an IN or FEATURE report from an attached device.
- * \param[in,out] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array.
- *
- * \returns Boolean \c true if the item to retrieve was located in the given report, \c false otherwise.
- */
- bool USB_GetHIDReportItemInfo(const uint8_t* ReportData,
- HID_ReportItem_t* const ReportItem) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Retrieves the given report item's value out of the \c Value member of the report item's
- * \ref HID_ReportItem_t structure and places it into the correct position in the HID report
- * buffer. The report buffer is assumed to have the appropriate bits cleared before calling
- * this function (i.e., the buffer should be explicitly cleared before report values are added).
- *
- * When called, this copies the report item's \c Value element to its \c PreviousValue element for easy
- * checking to see if an item's value has changed before sending a report.
- *
- * If the device has multiple HID reports, the first byte in the report is set to the report ID of the given item.
- *
- * \param[out] ReportData Buffer holding the current OUT or FEATURE report data.
- * \param[in] ReportItem Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array.
- */
- void USB_SetHIDReportItemInfo(uint8_t* ReportData,
- HID_ReportItem_t* const ReportItem) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Retrieves the size of a given HID report in bytes from its Report ID.
- *
- * \param[in] ParserData Pointer to a \ref HID_ReportInfo_t instance containing the parser output.
- * \param[in] ReportID Report ID of the report whose size is to be determined.
- * \param[in] ReportType Type of the report whose size is to be determined, a value from the
- * \ref HID_ReportItemTypes_t enum.
- *
- * \return Size of the report in bytes, or \c 0 if the report does not exist.
- */
- uint16_t USB_GetHIDReportSize(HID_ReportInfo_t* const ParserData,
- const uint8_t ReportID,
- const uint8_t ReportType) ATTR_CONST ATTR_NON_NULL_PTR_ARG(1);
-
- /** Callback routine for the HID Report Parser. This callback <b>must</b> be implemented by the user code when
- * the parser is used, to determine what report IN, OUT and FEATURE item's information is stored into the user
- * \ref HID_ReportInfo_t structure. This can be used to filter only those items the application will be using, so that
- * no RAM is wasted storing the attributes for report items which will never be referenced by the application.
- *
- * Report item pointers passed to this callback function may be cached by the user application for later use
- * when processing report items. This provides faster report processing in the user application than would
- * a search of the entire parsed report item table for each received or sent report.
- *
- * \param[in] CurrentItem Pointer to the current report item for user checking.
- *
- * \return Boolean \c true if the item should be stored into the \ref HID_ReportInfo_t structure, \c false if
- * it should be ignored.
- */
- bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem);
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Type Defines: */
- typedef struct
- {
- HID_ReportItem_Attributes_t Attributes;
- uint8_t ReportCount;
- uint8_t ReportID;
- } HID_StateTable_t;
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDReportData.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDReportData.h deleted file mode 100644 index 719739a5f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/HIDReportData.h +++ /dev/null @@ -1,126 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Constants for HID report item attributes.
- *
- * HID report item constants for report item attributes. Refer to the HID specification for
- * details on each flag's meaning when applied to an IN, OUT or FEATURE item.
- */
-
-/** \ingroup Group_HIDParser
- * \defgroup Group_HIDReportItemConst HID Report Descriptor Item Constants
- *
- * General HID constant definitions for HID Report Descriptor elements.
- *
- * @{
- */
-
-#ifndef __HIDREPORTDATA_H__
-#define __HIDREPORTDATA_H__
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define HID_RI_DATA_SIZE_MASK 0x03
- #define HID_RI_TYPE_MASK 0x0C
- #define HID_RI_TAG_MASK 0xF0
-
- #define HID_RI_TYPE_MAIN 0x00
- #define HID_RI_TYPE_GLOBAL 0x04
- #define HID_RI_TYPE_LOCAL 0x08
-
- #define HID_RI_DATA_BITS_0 0x00
- #define HID_RI_DATA_BITS_8 0x01
- #define HID_RI_DATA_BITS_16 0x02
- #define HID_RI_DATA_BITS_32 0x03
- #define HID_RI_DATA_BITS(DataBits) HID_RI_DATA_BITS_ ## DataBits
-
- #define _HID_RI_ENCODE_0(Data)
- #define _HID_RI_ENCODE_8(Data) , (Data & 0xFF)
- #define _HID_RI_ENCODE_16(Data) _HID_RI_ENCODE_8(Data) _HID_RI_ENCODE_8(Data >> 8)
- #define _HID_RI_ENCODE_32(Data) _HID_RI_ENCODE_16(Data) _HID_RI_ENCODE_16(Data >> 16)
- #define _HID_RI_ENCODE(DataBits, ...) _HID_RI_ENCODE_ ## DataBits(__VA_ARGS__)
-
- #define _HID_RI_ENTRY(Type, Tag, DataBits, ...) (Type | Tag | HID_RI_DATA_BITS(DataBits)) _HID_RI_ENCODE(DataBits, (__VA_ARGS__))
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name HID Input, Output and Feature Report Descriptor Item Flags */
- //@{
- #define HID_IOF_CONSTANT (1 << 0)
- #define HID_IOF_DATA (0 << 0)
- #define HID_IOF_VARIABLE (1 << 1)
- #define HID_IOF_ARRAY (0 << 1)
- #define HID_IOF_RELATIVE (1 << 2)
- #define HID_IOF_ABSOLUTE (0 << 2)
- #define HID_IOF_WRAP (1 << 3)
- #define HID_IOF_NO_WRAP (0 << 3)
- #define HID_IOF_NON_LINEAR (1 << 4)
- #define HID_IOF_LINEAR (0 << 4)
- #define HID_IOF_NO_PREFERRED_STATE (1 << 5)
- #define HID_IOF_PREFERRED_STATE (0 << 5)
- #define HID_IOF_NULLSTATE (1 << 6)
- #define HID_IOF_NO_NULL_POSITION (0 << 6)
- #define HID_IOF_VOLATILE (1 << 7)
- #define HID_IOF_NON_VOLATILE (0 << 7)
- #define HID_IOF_BUFFERED_BYTES (1 << 8)
- #define HID_IOF_BITFIELD (0 << 8)
- //@}
-
- /** \name HID Report Descriptor Item Macros */
- //@{
- #define HID_RI_INPUT(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_MAIN , 0x80, DataBits, __VA_ARGS__)
- #define HID_RI_OUTPUT(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_MAIN , 0x90, DataBits, __VA_ARGS__)
- #define HID_RI_COLLECTION(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_MAIN , 0xA0, DataBits, __VA_ARGS__)
- #define HID_RI_FEATURE(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_MAIN , 0xB0, DataBits, __VA_ARGS__)
- #define HID_RI_END_COLLECTION(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_MAIN , 0xC0, DataBits, __VA_ARGS__)
- #define HID_RI_USAGE_PAGE(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0x00, DataBits, __VA_ARGS__)
- #define HID_RI_LOGICAL_MINIMUM(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0x10, DataBits, __VA_ARGS__)
- #define HID_RI_LOGICAL_MAXIMUM(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0x20, DataBits, __VA_ARGS__)
- #define HID_RI_PHYSICAL_MINIMUM(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0x30, DataBits, __VA_ARGS__)
- #define HID_RI_PHYSICAL_MAXIMUM(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0x40, DataBits, __VA_ARGS__)
- #define HID_RI_UNIT_EXPONENT(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0x50, DataBits, __VA_ARGS__)
- #define HID_RI_UNIT(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0x60, DataBits, __VA_ARGS__)
- #define HID_RI_REPORT_SIZE(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0x70, DataBits, __VA_ARGS__)
- #define HID_RI_REPORT_ID(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0x80, DataBits, __VA_ARGS__)
- #define HID_RI_REPORT_COUNT(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0x90, DataBits, __VA_ARGS__)
- #define HID_RI_PUSH(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0xA0, DataBits, __VA_ARGS__)
- #define HID_RI_POP(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_GLOBAL, 0xB0, DataBits, __VA_ARGS__)
- #define HID_RI_USAGE(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_LOCAL , 0x00, DataBits, __VA_ARGS__)
- #define HID_RI_USAGE_MINIMUM(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_LOCAL , 0x10, DataBits, __VA_ARGS__)
- #define HID_RI_USAGE_MAXIMUM(DataBits, ...) _HID_RI_ENTRY(HID_RI_TYPE_LOCAL , 0x20, DataBits, __VA_ARGS__)
- //@}
-
-/** @} */
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h deleted file mode 100644 index e0b77eca8..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/MIDIClassCommon.h +++ /dev/null @@ -1,320 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common definitions and declarations for the library USB MIDI Class driver.
- *
- * Common definitions and declarations for the library USB MIDI Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassMIDI
- * \defgroup Group_USBClassMIDICommon Common Class Definitions
- *
- * \section Sec_ModDescription Module Description
- * Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
- * MIDI Class.
- *
- * @{
- */
-
-#ifndef _MIDI_CLASS_COMMON_H_
-#define _MIDI_CLASS_COMMON_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_AUDIO_DRIVER
-
- /* Includes: */
- #include "../../Core/StdDescriptors.h"
- #include "AudioClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_MIDI_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Macros: */
- /** \name MIDI Command Values */
- //@{
- /** MIDI command for a note on (activation) event. */
- #define MIDI_COMMAND_NOTE_ON 0x90
-
- /** MIDI command for a note off (deactivation) event. */
- #define MIDI_COMMAND_NOTE_OFF 0x80
- //@}
-
- /** Standard key press velocity value used for all note events. */
- #define MIDI_STANDARD_VELOCITY 64
-
- /** Convenience macro. MIDI channels are numbered from 1-10 (natural numbers) however the logical channel
- * addresses are zero-indexed. This converts a natural MIDI channel number into the logical channel address.
- *
- * \param[in] channel MIDI channel number to address.
- *
- * \return Constructed MIDI channel ID.
- */
- #define MIDI_CHANNEL(channel) ((channel) - 1)
-
- /** Constructs a MIDI event ID from a given MIDI command and a virtual MIDI cable index. This can then be
- * used to create and decode \ref MIDI_EventPacket_t MIDI event packets.
- *
- * \param[in] virtualcable Index of the virtual MIDI cable the event relates to
- * \param[in] command MIDI command to send through the virtual MIDI cable
- *
- * \return Constructed MIDI event ID.
- */
- #define MIDI_EVENT(virtualcable, command) ((virtualcable << 4) | (command >> 4))
-
- /* Enums: */
- /** Enum for the possible MIDI jack types in a MIDI device jack descriptor. */
- enum MIDI_JackTypes_t
- {
- MIDI_JACKTYPE_Embedded = 0x01, /**< MIDI class descriptor jack type value for an embedded (logical) MIDI input or output jack. */
- MIDI_JACKTYPE_External = 0x02, /**< MIDI class descriptor jack type value for an external (physical) MIDI input or output jack. */
- };
-
- /* Type Defines: */
- /** \brief MIDI class-specific Streaming Interface Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific MIDI streaming interface descriptor. This indicates to the host
- * how MIDI the specification compliance of the device and the total length of the Audio class-specific descriptors.
- * See the USB Audio specification for more details.
- *
- * \see \ref USB_MIDI_StdDescriptor_AudioInterface_AS_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
-
- uint16_t AudioSpecification; /**< Binary coded decimal value, indicating the supported Audio Class
- * specification version.
- */
- uint16_t TotalLength; /**< Total length of the Audio class-specific descriptors, including this descriptor. */
- } ATTR_PACKED USB_MIDI_Descriptor_AudioInterface_AS_t;
-
- /** \brief MIDI class-specific Streaming Interface Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific MIDI streaming interface descriptor. This indicates to the host
- * how MIDI the specification compliance of the device and the total length of the Audio class-specific descriptors.
- * See the USB Audio specification for more details.
- *
- * \see \ref USB_MIDI_Descriptor_AudioInterface_AS_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
-
- uint8_t bDescriptorSubtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
-
- uint16_t bcdMSC; /**< Binary coded decimal value, indicating the supported MIDI Class specification version. */
- uint16_t wTotalLength; /**< Total length of the Audio class-specific descriptors, including this descriptor. */
- } ATTR_PACKED USB_MIDI_StdDescriptor_AudioInterface_AS_t;
-
- /** \brief MIDI class-specific Input Jack Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific MIDI IN jack. This gives information to the host on a MIDI input, either
- * a physical input jack, or a logical jack (receiving input data internally, or from the host via an endpoint).
- *
- * \see \ref USB_MIDI_StdDescriptor_InputJack_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
-
- uint8_t JackType; /**< Type of jack, one of the \c JACKTYPE_* mask values. */
- uint8_t JackID; /**< ID value of this jack - must be a unique value within the device. */
-
- uint8_t JackStrIndex; /**< Index of a string descriptor describing this descriptor within the device. */
- } ATTR_PACKED USB_MIDI_Descriptor_InputJack_t;
-
- /** \brief MIDI class-specific Input Jack Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific MIDI IN jack. This gives information to the host on a MIDI input, either
- * a physical input jack, or a logical jack (receiving input data internally, or from the host via an endpoint).
- *
- * \see \ref USB_MIDI_Descriptor_InputJack_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
-
- uint8_t bDescriptorSubtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
-
- uint8_t bJackType; /**< Type of jack, one of the \c JACKTYPE_* mask values. */
- uint8_t bJackID; /**< ID value of this jack - must be a unique value within the device. */
-
- uint8_t iJack; /**< Index of a string descriptor describing this descriptor within the device. */
- } ATTR_PACKED USB_MIDI_StdDescriptor_InputJack_t;
-
- /** \brief MIDI class-specific Output Jack Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific MIDI OUT jack. This gives information to the host on a MIDI output, either
- * a physical output jack, or a logical jack (sending output data internally, or to the host via an endpoint).
- *
- * \see \ref USB_MIDI_StdDescriptor_OutputJack_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
-
- uint8_t JackType; /**< Type of jack, one of the \c JACKTYPE_* mask values. */
- uint8_t JackID; /**< ID value of this jack - must be a unique value within the device. */
-
- uint8_t NumberOfPins; /**< Number of output channels within the jack, either physical or logical. */
- uint8_t SourceJackID[1]; /**< ID of each output pin's source data jack. */
- uint8_t SourcePinID[1]; /**< Pin number in the input jack of each output pin's source data. */
-
- uint8_t JackStrIndex; /**< Index of a string descriptor describing this descriptor within the device. */
- } ATTR_PACKED USB_MIDI_Descriptor_OutputJack_t;
-
- /** \brief MIDI class-specific Output Jack Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific MIDI OUT jack. This gives information to the host on a MIDI output, either
- * a physical output jack, or a logical jack (sending output data internally, or to the host via an endpoint).
- *
- * \see \ref USB_MIDI_Descriptor_OutputJack_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
-
- uint8_t bDescriptorSubtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
-
- uint8_t bJackType; /**< Type of jack, one of the \c JACKTYPE_* mask values. */
- uint8_t bJackID; /**< ID value of this jack - must be a unique value within the device. */
-
- uint8_t bNrInputPins; /**< Number of output channels within the jack, either physical or logical. */
- uint8_t baSourceID[1]; /**< ID of each output pin's source data jack. */
- uint8_t baSourcePin[1]; /**< Pin number in the input jack of each output pin's source data. */
-
- uint8_t iJack; /**< Index of a string descriptor describing this descriptor within the device. */
- } ATTR_PACKED USB_MIDI_StdDescriptor_OutputJack_t;
-
- /** \brief Audio class-specific Jack Endpoint Descriptor (LUFA naming conventions).
- *
- * Type define for an Audio class-specific extended MIDI jack endpoint descriptor. This contains extra information
- * on the usage of MIDI endpoints used to stream MIDI events in and out of the USB Audio device, and follows an Audio
- * class-specific extended MIDI endpoint descriptor. See the USB Audio specification for more details.
- *
- * \see \ref USB_MIDI_StdDescriptor_Jack_Endpoint_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Regular descriptor header containing the descriptor's type and length. */
- uint8_t Subtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
-
- uint8_t TotalEmbeddedJacks; /**< Total number of jacks inside this endpoint. */
- uint8_t AssociatedJackID[1]; /**< IDs of each jack inside the endpoint. */
- } ATTR_PACKED USB_MIDI_Descriptor_Jack_Endpoint_t;
-
- /** \brief Audio class-specific Jack Endpoint Descriptor (USB-IF naming conventions).
- *
- * Type define for an Audio class-specific extended MIDI jack endpoint descriptor. This contains extra information
- * on the usage of MIDI endpoints used to stream MIDI events in and out of the USB Audio device, and follows an Audio
- * class-specific extended MIDI endpoint descriptor. See the USB Audio specification for more details.
- *
- * \see \ref USB_MIDI_Descriptor_Jack_Endpoint_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
-
- uint8_t bDescriptorSubtype; /**< Sub type value used to distinguish between audio class-specific descriptors. */
-
- uint8_t bNumEmbMIDIJack; /**< Total number of jacks inside this endpoint. */
- uint8_t bAssocJackID[1]; /**< IDs of each jack inside the endpoint. */
- } ATTR_PACKED USB_MIDI_StdDescriptor_Jack_Endpoint_t;
-
- /** \brief MIDI Class Driver Event Packet.
- *
- * Type define for a USB MIDI event packet, used to encapsulate sent and received MIDI messages from a USB MIDI interface.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t Event; /**< MIDI event type, constructed with the \ref MIDI_EVENT() macro. */
-
- uint8_t Data1; /**< First byte of data in the MIDI event. */
- uint8_t Data2; /**< Second byte of data in the MIDI event. */
- uint8_t Data3; /**< Third byte of data in the MIDI event. */
- } ATTR_PACKED MIDI_EventPacket_t;
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/MassStorageClassCommon.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/MassStorageClassCommon.h deleted file mode 100644 index 38167f64e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/MassStorageClassCommon.h +++ /dev/null @@ -1,365 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common definitions and declarations for the library USB Mass Storage Class driver.
- *
- * Common definitions and declarations for the library USB Mass Storage Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassMS
- * \defgroup Group_USBClassMSCommon Common Class Definitions
- *
- * \section Sec_ModDescription Module Description
- * Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
- * Mass Storage Class.
- *
- * @{
- */
-
-#ifndef _MS_CLASS_COMMON_H_
-#define _MS_CLASS_COMMON_H_
-
- /* Includes: */
- #include "../../Core/StdDescriptors.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_MS_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Macros: */
- /** Magic signature for a Command Block Wrapper used in the Mass Storage Bulk-Only transport protocol. */
- #define MS_CBW_SIGNATURE 0x43425355UL
-
- /** Magic signature for a Command Status Wrapper used in the Mass Storage Bulk-Only transport protocol. */
- #define MS_CSW_SIGNATURE 0x53425355UL
-
- /** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from host-to-device. */
- #define MS_COMMAND_DIR_DATA_OUT (0 << 7)
-
- /** Mask for a Command Block Wrapper's flags attribute to specify a command with data sent from device-to-host. */
- #define MS_COMMAND_DIR_DATA_IN (1 << 7)
-
- /** \name SCSI Commands*/
- //@{
- /** SCSI Command Code for an INQUIRY command. */
- #define SCSI_CMD_INQUIRY 0x12
-
- /** SCSI Command Code for a REQUEST SENSE command. */
- #define SCSI_CMD_REQUEST_SENSE 0x03
-
- /** SCSI Command Code for a TEST UNIT READY command. */
- #define SCSI_CMD_TEST_UNIT_READY 0x00
-
- /** SCSI Command Code for a READ CAPACITY (10) command. */
- #define SCSI_CMD_READ_CAPACITY_10 0x25
-
- /** SCSI Command Code for a SEND DIAGNOSTIC command. */
- #define SCSI_CMD_SEND_DIAGNOSTIC 0x1D
-
- /** SCSI Command Code for a PREVENT ALLOW MEDIUM REMOVAL command. */
- #define SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
-
- /** SCSI Command Code for a WRITE (10) command. */
- #define SCSI_CMD_WRITE_10 0x2A
-
- /** SCSI Command Code for a READ (10) command. */
- #define SCSI_CMD_READ_10 0x28
-
- /** SCSI Command Code for a WRITE (6) command. */
- #define SCSI_CMD_WRITE_6 0x0A
-
- /** SCSI Command Code for a READ (6) command. */
- #define SCSI_CMD_READ_6 0x08
-
- /** SCSI Command Code for a VERIFY (10) command. */
- #define SCSI_CMD_VERIFY_10 0x2F
-
- /** SCSI Command Code for a MODE SENSE (6) command. */
- #define SCSI_CMD_MODE_SENSE_6 0x1A
-
- /** SCSI Command Code for a MODE SENSE (10) command. */
- #define SCSI_CMD_MODE_SENSE_10 0x5A
- //@}
-
- /** \name SCSI Sense Key Values */
- //@{
- /** SCSI Sense Code to indicate no error has occurred. */
- #define SCSI_SENSE_KEY_GOOD 0x00
-
- /** SCSI Sense Code to indicate that the device has recovered from an error. */
- #define SCSI_SENSE_KEY_RECOVERED_ERROR 0x01
-
- /** SCSI Sense Code to indicate that the device is not ready for a new command. */
- #define SCSI_SENSE_KEY_NOT_READY 0x02
-
- /** SCSI Sense Code to indicate an error whilst accessing the medium. */
- #define SCSI_SENSE_KEY_MEDIUM_ERROR 0x03
-
- /** SCSI Sense Code to indicate a hardware error has occurred. */
- #define SCSI_SENSE_KEY_HARDWARE_ERROR 0x04
-
- /** SCSI Sense Code to indicate that an illegal request has been issued. */
- #define SCSI_SENSE_KEY_ILLEGAL_REQUEST 0x05
-
- /** SCSI Sense Code to indicate that the unit requires attention from the host to indicate
- * a reset event, medium removal or other condition.
- */
- #define SCSI_SENSE_KEY_UNIT_ATTENTION 0x06
-
- /** SCSI Sense Code to indicate that a write attempt on a protected block has been made. */
- #define SCSI_SENSE_KEY_DATA_PROTECT 0x07
-
- /** SCSI Sense Code to indicate an error while trying to write to a write-once medium. */
- #define SCSI_SENSE_KEY_BLANK_CHECK 0x08
-
- /** SCSI Sense Code to indicate a vendor specific error has occurred. */
- #define SCSI_SENSE_KEY_VENDOR_SPECIFIC 0x09
-
- /** SCSI Sense Code to indicate that an EXTENDED COPY command has aborted due to an error. */
- #define SCSI_SENSE_KEY_COPY_ABORTED 0x0A
-
- /** SCSI Sense Code to indicate that the device has aborted the issued command. */
- #define SCSI_SENSE_KEY_ABORTED_COMMAND 0x0B
-
- /** SCSI Sense Code to indicate an attempt to write past the end of a partition has been made. */
- #define SCSI_SENSE_KEY_VOLUME_OVERFLOW 0x0D
-
- /** SCSI Sense Code to indicate that the source data did not match the data read from the medium. */
- #define SCSI_SENSE_KEY_MISCOMPARE 0x0E
- //@}
-
- /** \name SCSI Additional Sense Codes */
- //@{
- /** SCSI Additional Sense Code to indicate no additional sense information is available. */
- #define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION 0x00
-
- /** SCSI Additional Sense Code to indicate that the logical unit (LUN) addressed is not ready. */
- #define SCSI_ASENSE_LOGICAL_UNIT_NOT_READY 0x04
-
- /** SCSI Additional Sense Code to indicate an invalid field was encountered while processing the issued command. */
- #define SCSI_ASENSE_INVALID_FIELD_IN_CDB 0x24
-
- /** SCSI Additional Sense Code to indicate that a medium that was previously indicated as not ready has now
- * become ready for use.
- */
- #define SCSI_ASENSE_NOT_READY_TO_READY_CHANGE 0x28
-
- /** SCSI Additional Sense Code to indicate that an attempt to write to a protected area was made. */
- #define SCSI_ASENSE_WRITE_PROTECTED 0x27
-
- /** SCSI Additional Sense Code to indicate an error whilst formatting the device medium. */
- #define SCSI_ASENSE_FORMAT_ERROR 0x31
-
- /** SCSI Additional Sense Code to indicate an invalid command was issued. */
- #define SCSI_ASENSE_INVALID_COMMAND 0x20
-
- /** SCSI Additional Sense Code to indicate a write to a block out outside of the medium's range was issued. */
- #define SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x21
-
- /** SCSI Additional Sense Code to indicate that no removable medium is inserted into the device. */
- #define SCSI_ASENSE_MEDIUM_NOT_PRESENT 0x3A
- //@}
-
- /** \name SCSI Additional Sense Key Code Qualifiers */
- //@{
- /** SCSI Additional Sense Qualifier Code to indicate no additional sense qualifier information is available. */
- #define SCSI_ASENSEQ_NO_QUALIFIER 0x00
-
- /** SCSI Additional Sense Qualifier Code to indicate that a medium format command failed to complete. */
- #define SCSI_ASENSEQ_FORMAT_COMMAND_FAILED 0x01
-
- /** SCSI Additional Sense Qualifier Code to indicate that an initializing command must be issued before the issued
- * command can be executed.
- */
- #define SCSI_ASENSEQ_INITIALIZING_COMMAND_REQUIRED 0x02
-
- /** SCSI Additional Sense Qualifier Code to indicate that an operation is currently in progress. */
- #define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07
- //@}
-
- /* Enums: */
- /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the Mass
- * Storage device class.
- */
- enum MS_Descriptor_ClassSubclassProtocol_t
- {
- MS_CSCP_MassStorageClass = 0x08, /**< Descriptor Class value indicating that the device or interface
- * belongs to the Mass Storage class.
- */
- MS_CSCP_SCSITransparentSubclass = 0x06, /**< Descriptor Subclass value indicating that the device or interface
- * belongs to the SCSI Transparent Command Set subclass of the Mass
- * storage class.
- */
- MS_CSCP_BulkOnlyTransportProtocol = 0x50, /**< Descriptor Protocol value indicating that the device or interface
- * belongs to the Bulk Only Transport protocol of the Mass Storage class.
- */
- };
-
- /** Enum for the Mass Storage class specific control requests that can be issued by the USB bus host. */
- enum MS_ClassRequests_t
- {
- MS_REQ_GetMaxLUN = 0xFE, /**< Mass Storage class-specific request to retrieve the total number of Logical
- * Units (drives) in the SCSI device.
- */
- MS_REQ_MassStorageReset = 0xFF, /**< Mass Storage class-specific request to reset the Mass Storage interface,
- * ready for the next command.
- */
- };
-
- /** Enum for the possible command status wrapper return status codes. */
- enum MS_CommandStatusCodes_t
- {
- MS_SCSI_COMMAND_Pass = 0, /**< Command completed with no error */
- MS_SCSI_COMMAND_Fail = 1, /**< Command failed to complete - host may check the exact error via a
- * SCSI REQUEST SENSE command.
- */
- MS_SCSI_COMMAND_PhaseError = 2, /**< Command failed due to being invalid in the current phase. */
- };
-
- /* Type Defines: */
- /** \brief Mass Storage Class Command Block Wrapper.
- *
- * Type define for a Command Block Wrapper, used in the Mass Storage Bulk-Only Transport protocol.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t Signature; /**< Command block signature, must be \ref MS_CBW_SIGNATURE to indicate a valid Command Block. */
- uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper. */
- uint32_t DataTransferLength; /**< Length of the optional data portion of the issued command, in bytes. */
- uint8_t Flags; /**< Command block flags, indicating command data direction. */
- uint8_t LUN; /**< Logical Unit number this command is issued to. */
- uint8_t SCSICommandLength; /**< Length of the issued SCSI command within the SCSI command data array. */
- uint8_t SCSICommandData[16]; /**< Issued SCSI command in the Command Block. */
- } ATTR_PACKED MS_CommandBlockWrapper_t;
-
- /** \brief Mass Storage Class Command Status Wrapper.
- *
- * Type define for a Command Status Wrapper, used in the Mass Storage Bulk-Only Transport protocol.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t Signature; /**< Status block signature, must be \ref MS_CSW_SIGNATURE to indicate a valid Command Status. */
- uint32_t Tag; /**< Unique command ID value, to associate a command block wrapper with its command status wrapper. */
- uint32_t DataTransferResidue; /**< Number of bytes of data not processed in the SCSI command. */
- uint8_t Status; /**< Status code of the issued command - a value from the \ref MS_CommandStatusCodes_t enum. */
- } ATTR_PACKED MS_CommandStatusWrapper_t;
-
- /** \brief Mass Storage Class SCSI Sense Structure
- *
- * Type define for a SCSI Sense structure. Structures of this type are filled out by the
- * device via the \ref MS_Host_RequestSense() function, indicating the current sense data of the
- * device (giving explicit error codes for the last issued command). For details of the
- * structure contents, refer to the SCSI specifications.
- */
- typedef struct
- {
- uint8_t ResponseCode;
-
- uint8_t SegmentNumber;
-
- unsigned SenseKey : 4;
- unsigned Reserved : 1;
- unsigned ILI : 1;
- unsigned EOM : 1;
- unsigned FileMark : 1;
-
- uint8_t Information[4];
- uint8_t AdditionalLength;
- uint8_t CmdSpecificInformation[4];
- uint8_t AdditionalSenseCode;
- uint8_t AdditionalSenseQualifier;
- uint8_t FieldReplaceableUnitCode;
- uint8_t SenseKeySpecific[3];
- } ATTR_PACKED SCSI_Request_Sense_Response_t;
-
- /** \brief Mass Storage Class SCSI Inquiry Structure.
- *
- * Type define for a SCSI Inquiry structure. Structures of this type are filled out by the
- * device via the \ref MS_Host_GetInquiryData() function, retrieving the attached device's
- * information.
- *
- * For details of the structure contents, refer to the SCSI specifications.
- */
- typedef struct
- {
- unsigned DeviceType : 5;
- unsigned PeripheralQualifier : 3;
-
- unsigned Reserved : 7;
- unsigned Removable : 1;
-
- uint8_t Version;
-
- unsigned ResponseDataFormat : 4;
- unsigned Reserved2 : 1;
- unsigned NormACA : 1;
- unsigned TrmTsk : 1;
- unsigned AERC : 1;
-
- uint8_t AdditionalLength;
- uint8_t Reserved3[2];
-
- unsigned SoftReset : 1;
- unsigned CmdQue : 1;
- unsigned Reserved4 : 1;
- unsigned Linked : 1;
- unsigned Sync : 1;
- unsigned WideBus16Bit : 1;
- unsigned WideBus32Bit : 1;
- unsigned RelAddr : 1;
-
- uint8_t VendorID[8];
- uint8_t ProductID[16];
- uint8_t RevisionID[4];
- } ATTR_PACKED SCSI_Inquiry_Response_t;
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/PrinterClassCommon.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/PrinterClassCommon.h deleted file mode 100644 index eea39297c..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/PrinterClassCommon.h +++ /dev/null @@ -1,119 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common definitions and declarations for the library USB Printer Class driver.
- *
- * Common definitions and declarations for the library USB Printer Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassPrinter
- * \defgroup Group_USBClassPrinterCommon Common Class Definitions
- *
- * \section Sec_ModDescription Module Description
- * Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
- * Printer Class.
- *
- * @{
- */
-
-#ifndef _PRINTER_CLASS_COMMON_H_
-#define _PRINTER_CLASS_COMMON_H_
-
- /* Includes: */
- #include "../../Core/StdDescriptors.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_PRINTER_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Macros: */
- /** \name Virtual Printer Status Line Masks */
- //@{
- /** Port status mask for a printer device, indicating that an error has *not* occurred. */
- #define PRNT_PORTSTATUS_NOTERROR (1 << 3)
-
- /** Port status mask for a printer device, indicating that the device is currently selected. */
- #define PRNT_PORTSTATUS_SELECT (1 << 4)
-
- /** Port status mask for a printer device, indicating that the device is currently out of paper. */
- #define PRNT_PORTSTATUS_PAPEREMPTY (1 << 5)
- //@}
-
- /* Enums: */
- /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the Printer
- * device class.
- */
- enum PRNT_Descriptor_ClassSubclassProtocol_t
- {
- PRNT_CSCP_PrinterClass = 0x07, /**< Descriptor Class value indicating that the device or interface
- * belongs to the Printer class.
- */
- PRNT_CSCP_PrinterSubclass = 0x01, /**< Descriptor Subclass value indicating that the device or interface
- * belongs to the Printer subclass.
- */
- PRNT_CSCP_BidirectionalProtocol = 0x02, /**< Descriptor Protocol value indicating that the device or interface
- * belongs to the Bidirectional protocol of the Printer class.
- */
- };
-
- /** Enum for the Printer class specific control requests that can be issued by the USB bus host. */
- enum PRNT_ClassRequests_t
- {
- PRNT_REQ_GetDeviceID = 0x00, /**< Printer class-specific request to retrieve the Unicode ID
- * string of the device, containing the device's name, manufacturer
- * and supported printer languages.
- */
- PRNT_REQ_GetPortStatus = 0x01, /**< Printer class-specific request to get the current status of the
- * virtual printer port, for device selection and ready states.
- */
- PRNT_REQ_SoftReset = 0x02, /**< Printer class-specific request to reset the device, ready for new
- * printer commands.
- */
- };
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/RNDISClassCommon.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/RNDISClassCommon.h deleted file mode 100644 index bc4112189..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/RNDISClassCommon.h +++ /dev/null @@ -1,414 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common definitions and declarations for the library USB RNDIS Class driver.
- *
- * Common definitions and declarations for the library USB RNDIS Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassRNDIS
- * \defgroup Group_USBClassRNDISCommon Common Class Definitions
- *
- * \section Sec_ModDescription Module Description
- * Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
- * RNDIS Class.
- *
- * @{
- */
-
-#ifndef _RNDIS_CLASS_COMMON_H_
-#define _RNDIS_CLASS_COMMON_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_CDC_DRIVER
-
- /* Includes: */
- #include "../../Core/StdDescriptors.h"
- #include "CDCClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_RNDIS_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Macros: */
- /** Additional error code for RNDIS functions when a device returns a logical command failure. */
- #define RNDIS_ERROR_LOGICAL_CMD_FAILED 0x80
-
- /** Implemented RNDIS Version Major. */
- #define REMOTE_NDIS_VERSION_MAJOR 0x01
-
- /** Implemented RNDIS Version Minor. */
- #define REMOTE_NDIS_VERSION_MINOR 0x00
-
- /** \name RNDIS Message Values */
- //@{
- #define REMOTE_NDIS_PACKET_MSG 0x00000001UL
- #define REMOTE_NDIS_INITIALIZE_MSG 0x00000002UL
- #define REMOTE_NDIS_HALT_MSG 0x00000003UL
- #define REMOTE_NDIS_QUERY_MSG 0x00000004UL
- #define REMOTE_NDIS_SET_MSG 0x00000005UL
- #define REMOTE_NDIS_RESET_MSG 0x00000006UL
- #define REMOTE_NDIS_INDICATE_STATUS_MSG 0x00000007UL
- #define REMOTE_NDIS_KEEPALIVE_MSG 0x00000008UL
- //@}
-
- /** \name RNDIS Response Values */
- //@{
- #define REMOTE_NDIS_INITIALIZE_CMPLT 0x80000002UL
- #define REMOTE_NDIS_QUERY_CMPLT 0x80000004UL
- #define REMOTE_NDIS_SET_CMPLT 0x80000005UL
- #define REMOTE_NDIS_RESET_CMPLT 0x80000006UL
- #define REMOTE_NDIS_KEEPALIVE_CMPLT 0x80000008UL
- //@}
-
- /** \name RNDIS Status Values */
- //@{
- #define REMOTE_NDIS_STATUS_SUCCESS 0x00000000UL
- #define REMOTE_NDIS_STATUS_FAILURE 0xC0000001UL
- #define REMOTE_NDIS_STATUS_INVALID_DATA 0xC0010015UL
- #define REMOTE_NDIS_STATUS_NOT_SUPPORTED 0xC00000BBUL
- #define REMOTE_NDIS_STATUS_MEDIA_CONNECT 0x4001000BUL
- #define REMOTE_NDIS_STATUS_MEDIA_DISCONNECT 0x4001000CUL
- //@}
-
- /** \name RNDIS Media States */
- //@{
- #define REMOTE_NDIS_MEDIA_STATE_CONNECTED 0x00000000UL
- #define REMOTE_NDIS_MEDIA_STATE_DISCONNECTED 0x00000001UL
- //@}
-
- /** \name RNDIS Media Types */
- //@{
- #define REMOTE_NDIS_MEDIUM_802_3 0x00000000UL
- //@}
-
- /** \name RNDIS Connection Types */
- //@{
- #define REMOTE_NDIS_DF_CONNECTIONLESS 0x00000001UL
- #define REMOTE_NDIS_DF_CONNECTION_ORIENTED 0x00000002UL
- //@}
-
- /** \name RNDIS Packet Types */
- //@{
- #define REMOTE_NDIS_PACKET_DIRECTED 0x00000001UL
- #define REMOTE_NDIS_PACKET_MULTICAST 0x00000002UL
- #define REMOTE_NDIS_PACKET_ALL_MULTICAST 0x00000004UL
- #define REMOTE_NDIS_PACKET_BROADCAST 0x00000008UL
- #define REMOTE_NDIS_PACKET_SOURCE_ROUTING 0x00000010UL
- #define REMOTE_NDIS_PACKET_PROMISCUOUS 0x00000020UL
- #define REMOTE_NDIS_PACKET_SMT 0x00000040UL
- #define REMOTE_NDIS_PACKET_ALL_LOCAL 0x00000080UL
- #define REMOTE_NDIS_PACKET_GROUP 0x00001000UL
- #define REMOTE_NDIS_PACKET_ALL_FUNCTIONAL 0x00002000UL
- #define REMOTE_NDIS_PACKET_FUNCTIONAL 0x00004000UL
- #define REMOTE_NDIS_PACKET_MAC_FRAME 0x00008000UL
- //@}
-
- /** \name RNDIS OID Values */
- //@{
- #define OID_GEN_SUPPORTED_LIST 0x00010101UL
- #define OID_GEN_HARDWARE_STATUS 0x00010102UL
- #define OID_GEN_MEDIA_SUPPORTED 0x00010103UL
- #define OID_GEN_MEDIA_IN_USE 0x00010104UL
- #define OID_GEN_MAXIMUM_FRAME_SIZE 0x00010106UL
- #define OID_GEN_MAXIMUM_TOTAL_SIZE 0x00010111UL
- #define OID_GEN_LINK_SPEED 0x00010107UL
- #define OID_GEN_TRANSMIT_BLOCK_SIZE 0x0001010AUL
- #define OID_GEN_RECEIVE_BLOCK_SIZE 0x0001010BUL
- #define OID_GEN_VENDOR_ID 0x0001010CUL
- #define OID_GEN_VENDOR_DESCRIPTION 0x0001010DUL
- #define OID_GEN_CURRENT_PACKET_FILTER 0x0001010EUL
- #define OID_GEN_MAXIMUM_TOTAL_SIZE 0x00010111UL
- #define OID_GEN_MEDIA_CONNECT_STATUS 0x00010114UL
- #define OID_GEN_PHYSICAL_MEDIUM 0x00010202UL
- #define OID_GEN_XMIT_OK 0x00020101UL
- #define OID_GEN_RCV_OK 0x00020102UL
- #define OID_GEN_XMIT_ERROR 0x00020103UL
- #define OID_GEN_RCV_ERROR 0x00020104UL
- #define OID_GEN_RCV_NO_BUFFER 0x00020105UL
- #define OID_802_3_PERMANENT_ADDRESS 0x01010101UL
- #define OID_802_3_CURRENT_ADDRESS 0x01010102UL
- #define OID_802_3_MULTICAST_LIST 0x01010103UL
- #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104UL
- #define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101UL
- #define OID_802_3_XMIT_ONE_COLLISION 0x01020102UL
- #define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103UL
- //@}
-
- /** Maximum size in bytes of a RNDIS control message which can be sent or received. */
- #define RNDIS_MESSAGE_BUFFER_SIZE 128
-
- /** Maximum size in bytes of an Ethernet frame according to the Ethernet standard. */
- #define ETHERNET_FRAME_SIZE_MAX 1500
-
- /* Enums: */
- /** Enum for the RNDIS class specific control requests that can be issued by the USB bus host. */
- enum RNDIS_ClassRequests_t
- {
- RNDIS_REQ_SendEncapsulatedCommand = 0x00, /**< RNDIS request to issue a host-to-device NDIS command. */
- RNDIS_REQ_GetEncapsulatedResponse = 0x01, /**< RNDIS request to issue a device-to-host NDIS response. */
- };
-
- /** Enum for the possible NDIS adapter states. */
- enum RNDIS_States_t
- {
- RNDIS_Uninitialized = 0, /**< Adapter currently uninitialized. */
- RNDIS_Initialized = 1, /**< Adapter currently initialized but not ready for data transfers. */
- RNDIS_Data_Initialized = 2, /**< Adapter currently initialized and ready for data transfers. */
- };
-
- /** Enum for the RNDIS class specific notification requests that can be issued by a RNDIS device to a host. */
- enum RNDIS_ClassNotifications_t
- {
- RNDIS_NOTIF_ResponseAvailable = 0x01, /**< Notification request value for a RNDIS Response Available notification. */
- };
-
- /** Enum for the NDIS hardware states. */
- enum NDIS_Hardware_Status_t
- {
- NDIS_HardwareStatus_Ready, /**< Hardware Ready to accept commands from the host. */
- NDIS_HardwareStatus_Initializing, /**< Hardware busy initializing. */
- NDIS_HardwareStatus_Reset, /**< Hardware reset. */
- NDIS_HardwareStatus_Closing, /**< Hardware currently closing. */
- NDIS_HardwareStatus_NotReady /**< Hardware not ready to accept commands from the host. */
- };
-
- /* Type Defines: */
- /** \brief MAC Address Structure.
- *
- * Type define for a physical MAC address of a device on a network.
- */
- typedef struct
- {
- uint8_t Octets[6]; /**< Individual bytes of a MAC address */
- } ATTR_PACKED MAC_Address_t;
-
- /** \brief RNDIS Common Message Header Structure.
- *
- * Type define for a RNDIS message header, sent before RNDIS messages.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType; /**< RNDIS message type, a \c REMOTE_NDIS_*_MSG constant */
- uint32_t MessageLength; /**< Total length of the RNDIS message, in bytes */
- } ATTR_PACKED RNDIS_Message_Header_t;
-
- /** \brief RNDIS Message Structure.
- *
- * Type define for a RNDIS packet message, used to encapsulate Ethernet packets sent to and from the adapter.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t DataOffset;
- uint32_t DataLength;
- uint32_t OOBDataOffset;
- uint32_t OOBDataLength;
- uint32_t NumOOBDataElements;
- uint32_t PerPacketInfoOffset;
- uint32_t PerPacketInfoLength;
- uint32_t VcHandle;
- uint32_t Reserved;
- } ATTR_PACKED RNDIS_Packet_Message_t;
-
- /** \brief RNDIS Initialization Message Structure.
- *
- * Type define for a RNDIS Initialize command message.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
-
- uint32_t MajorVersion;
- uint32_t MinorVersion;
- uint32_t MaxTransferSize;
- } ATTR_PACKED RNDIS_Initialize_Message_t;
-
- /** \brief RNDIS Initialize Complete Message Structure.
- *
- * Type define for a RNDIS Initialize Complete response message.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
- uint32_t Status;
-
- uint32_t MajorVersion;
- uint32_t MinorVersion;
- uint32_t DeviceFlags;
- uint32_t Medium;
- uint32_t MaxPacketsPerTransfer;
- uint32_t MaxTransferSize;
- uint32_t PacketAlignmentFactor;
- uint32_t AFListOffset;
- uint32_t AFListSize;
- } ATTR_PACKED RNDIS_Initialize_Complete_t;
-
- /** \brief RNDIS Keep Alive Message Structure.
- *
- * Type define for a RNDIS Keep Alive command message.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
- } ATTR_PACKED RNDIS_KeepAlive_Message_t;
-
- /** \brief RNDIS Keep Alive Complete Message Structure.
- *
- * Type define for a RNDIS Keep Alive Complete response message.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
- uint32_t Status;
- } ATTR_PACKED RNDIS_KeepAlive_Complete_t;
-
- /** \brief RNDIS Reset Complete Message Structure.
- *
- * Type define for a RNDIS Reset Complete response message.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t Status;
-
- uint32_t AddressingReset;
- } ATTR_PACKED RNDIS_Reset_Complete_t;
-
- /** \brief RNDIS OID Property Set Message Structure.
- *
- * Type define for a RNDIS OID Property Set command message.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
-
- uint32_t Oid;
- uint32_t InformationBufferLength;
- uint32_t InformationBufferOffset;
- uint32_t DeviceVcHandle;
- } ATTR_PACKED RNDIS_Set_Message_t;
-
- /** \brief RNDIS OID Property Set Complete Message Structure.
- *
- * Type define for a RNDIS OID Property Set Complete response message.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
- uint32_t Status;
- } ATTR_PACKED RNDIS_Set_Complete_t;
-
- /** \brief RNDIS OID Property Query Message Structure.
- *
- * Type define for a RNDIS OID Property Query command message.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
-
- uint32_t Oid;
- uint32_t InformationBufferLength;
- uint32_t InformationBufferOffset;
- uint32_t DeviceVcHandle;
- } ATTR_PACKED RNDIS_Query_Message_t;
-
- /** \brief RNDIS OID Property Query Complete Message Structure.
- *
- * Type define for a RNDIS OID Property Query Complete response message.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t MessageType;
- uint32_t MessageLength;
- uint32_t RequestId;
- uint32_t Status;
-
- uint32_t InformationBufferLength;
- uint32_t InformationBufferOffset;
- } ATTR_PACKED RNDIS_Query_Complete_t;
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/StillImageClassCommon.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/StillImageClassCommon.h deleted file mode 100644 index a3388e2e7..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Common/StillImageClassCommon.h +++ /dev/null @@ -1,161 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common definitions and declarations for the library USB Still Image Class driver.
- *
- * Common definitions and declarations for the library USB Still Image Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassSI
- * \defgroup Group_USBClassSICommon Common Class Definitions
- *
- * \section Sec_ModDescription Module Description
- * Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
- * Still Image Class.
- *
- * @{
- */
-
-#ifndef _SI_CLASS_COMMON_H_
-#define _SI_CLASS_COMMON_H_
-
- /* Includes: */
- #include "../../Core/StdDescriptors.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_SI_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Macros: */
- /** Length in bytes of a given Unicode string's character length.
- *
- * \param[in] Chars Total number of Unicode characters in the string.
- *
- * \return Number of bytes of the given unicode string.
- */
- #define UNICODE_STRING_LENGTH(Chars) ((Chars) << 1)
-
- /** Used in the DataLength field of a PIMA container, to give the total container size in bytes for
- * a command container.
- *
- * \param[in] Params Number of parameters which are to be sent in the \c Param field of the container.
- */
- #define PIMA_COMMAND_SIZE(Params) ((sizeof(PIMA_Container_t) - 12) + ((Params) * sizeof(uint32_t)))
-
- /** Used in the DataLength field of a PIMA container, to give the total container size in bytes for
- * a data container.
- *
- * \param[in] DataLen Length in bytes of the data in the container.
- */
- #define PIMA_DATA_SIZE(DataLen) ((sizeof(PIMA_Container_t) - 12) + (DataLen))
-
- /* Enums: */
- /** Enum for the possible PIMA contains types. */
- enum PIMA_Container_Types_t
- {
- PIMA_CONTAINER_Undefined = 0, /**< Undefined container type. */
- PIMA_CONTAINER_CommandBlock = 1, /**< Command Block container type. */
- PIMA_CONTAINER_DataBlock = 2, /**< Data Block container type. */
- PIMA_CONTAINER_ResponseBlock = 3, /**< Response container type. */
- PIMA_CONTAINER_EventBlock = 4, /**< Event Block container type. */
- };
-
- /* Enums: */
- /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors relating to the
- * Still Image device class.
- */
- enum SI_Descriptor_ClassSubclassProtocol_t
- {
- SI_CSCP_StillImageClass = 0x06, /**< Descriptor Class value indicating that the device or interface
- * belongs to the Still Image class.
- */
- SI_CSCP_StillImageSubclass = 0x01, /**< Descriptor Subclass value indicating that the device or interface
- * belongs to the Still Image subclass.
- */
- SI_CSCP_BulkOnlyProtocol = 0x01, /**< Descriptor Protocol value indicating that the device or interface
- * belongs to the Bulk Only Transport protocol of the Still Image class.
- */
- };
-
- /** Enums for the possible status codes of a returned Response Block from an attached PIMA compliant Still Image device. */
- enum PIMA_ResponseCodes_t
- {
- PIMA_RESPONSE_OK = 1, /**< Response code indicating no error in the issued command. */
- PIMA_RESPONSE_GeneralError = 2, /**< Response code indicating a general error while processing the
- * issued command.
- */
- PIMA_RESPONSE_SessionNotOpen = 3, /**< Response code indicating that the sent command requires an open
- * session before being issued.
- */
- PIMA_RESPONSE_InvalidTransaction = 4, /**< Response code indicating an invalid transaction occurred. */
- PIMA_RESPONSE_OperationNotSupported = 5, /**< Response code indicating that the issued command is not supported
- * by the attached device.
- */
- PIMA_RESPONSE_ParameterNotSupported = 6, /**< Response code indicating that one or more of the issued command's
- * parameters are not supported by the device.
- */
- };
-
- /* Type Defines: */
- /** \brief PIMA Still Image Device Command/Response Container.
- *
- * Type define for a PIMA container, use to send commands and receive responses to and from an
- * attached Still Image device.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint32_t DataLength; /**< Length of the container and data, in bytes. */
- uint16_t Type; /**< Container type, a value from the \ref PIMA_Container_Types_t enum. */
- uint16_t Code; /**< Command, event or response code of the container. */
- uint32_t TransactionID; /**< Unique container ID to link blocks together. */
- uint32_t Params[3]; /**< Block parameters to be issued along with the block code (command blocks only). */
- } ATTR_PACKED PIMA_Container_t;
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c deleted file mode 100644 index 3fb350a11..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/AudioClassDevice.c +++ /dev/null @@ -1,198 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#define __INCLUDE_FROM_AUDIO_DRIVER
-#define __INCLUDE_FROM_AUDIO_DEVICE_C
-#include "AudioClassDevice.h"
-
-void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
-{
- if (!(Endpoint_IsSETUPReceived()))
- return;
-
- if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_INTERFACE)
- {
- uint8_t InterfaceIndex = (USB_ControlRequest.wIndex & 0xFF);
-
- if ((InterfaceIndex != AudioInterfaceInfo->Config.ControlInterfaceNumber) &&
- (InterfaceIndex != AudioInterfaceInfo->Config.StreamingInterfaceNumber))
- {
- return;
- }
- }
- else if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_ENDPOINT)
- {
- uint8_t EndpointAddress = (USB_ControlRequest.wIndex & 0xFF);
-
- if ((EndpointAddress != AudioInterfaceInfo->Config.DataINEndpoint.Address) &&
- (EndpointAddress != AudioInterfaceInfo->Config.DataOUTEndpoint.Address))
- {
- return;
- }
- }
-
- switch (USB_ControlRequest.bRequest)
- {
- case REQ_SetInterface:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
- Endpoint_ClearStatusStage();
-
- AudioInterfaceInfo->State.InterfaceEnabled = ((USB_ControlRequest.wValue & 0xFF) != 0);
- EVENT_Audio_Device_StreamStartStop(AudioInterfaceInfo);
- }
-
- break;
- case AUDIO_REQ_GetStatus:
- if ((USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) ||
- (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT)))
- {
- Endpoint_ClearSETUP();
- Endpoint_ClearStatusStage();
- }
-
- break;
- case AUDIO_REQ_SetCurrent:
- case AUDIO_REQ_SetMinimum:
- case AUDIO_REQ_SetMaximum:
- case AUDIO_REQ_SetResolution:
- if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_ENDPOINT)
- {
- uint8_t EndpointProperty = USB_ControlRequest.bRequest;
- uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
- uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
-
- if (CALLBACK_Audio_Device_GetSetEndpointProperty(AudioInterfaceInfo, EndpointProperty, EndpointAddress,
- EndpointControl, NULL, NULL))
- {
- uint16_t ValueLength = USB_ControlRequest.wLength;
- uint8_t Value[ValueLength];
-
- Endpoint_ClearSETUP();
- Endpoint_Read_Control_Stream_LE(Value, ValueLength);
- Endpoint_ClearIN();
-
- CALLBACK_Audio_Device_GetSetEndpointProperty(AudioInterfaceInfo, EndpointProperty, EndpointAddress,
- EndpointControl, &ValueLength, Value);
- }
- }
- else if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_INTERFACE)
- {
- uint8_t Property = USB_ControlRequest.bRequest;
- uint8_t Entity = (USB_ControlRequest.wIndex >> 8);
- uint16_t Parameter = USB_ControlRequest.wValue;
-
- if (CALLBACK_Audio_Device_GetSetInterfaceProperty(AudioInterfaceInfo, Property, Entity,
- Parameter, NULL, NULL))
- {
- uint16_t ValueLength = USB_ControlRequest.wLength;
- uint8_t Value[ValueLength];
-
- Endpoint_ClearSETUP();
- Endpoint_Read_Control_Stream_LE(Value, ValueLength);
- Endpoint_ClearIN();
-
- CALLBACK_Audio_Device_GetSetInterfaceProperty(AudioInterfaceInfo, Property, Entity,
- Parameter, &ValueLength, Value);
- }
- }
-
- break;
- case AUDIO_REQ_GetCurrent:
- case AUDIO_REQ_GetMinimum:
- case AUDIO_REQ_GetMaximum:
- case AUDIO_REQ_GetResolution:
- if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_ENDPOINT)
- {
- uint8_t EndpointProperty = USB_ControlRequest.bRequest;
- uint8_t EndpointAddress = (uint8_t)USB_ControlRequest.wIndex;
- uint8_t EndpointControl = (USB_ControlRequest.wValue >> 8);
- uint16_t ValueLength = USB_ControlRequest.wLength;
- uint8_t Value[ValueLength];
-
- if (CALLBACK_Audio_Device_GetSetEndpointProperty(AudioInterfaceInfo, EndpointProperty, EndpointAddress,
- EndpointControl, &ValueLength, Value))
- {
- Endpoint_ClearSETUP();
- Endpoint_Write_Control_Stream_LE(Value, ValueLength);
- Endpoint_ClearOUT();
- }
- }
- else if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT) == REQREC_INTERFACE)
- {
- uint8_t Property = USB_ControlRequest.bRequest;
- uint8_t Entity = (USB_ControlRequest.wIndex >> 8);
- uint16_t Parameter = USB_ControlRequest.wValue;
- uint16_t ValueLength = USB_ControlRequest.wLength;
- uint8_t Value[ValueLength];
-
- if (CALLBACK_Audio_Device_GetSetInterfaceProperty(AudioInterfaceInfo, Property, Entity,
- Parameter, &ValueLength, Value))
- {
- Endpoint_ClearSETUP();
- Endpoint_Write_Control_Stream_LE(Value, ValueLength);
- Endpoint_ClearOUT();
- }
- }
-
- break;
- }
-}
-
-bool Audio_Device_ConfigureEndpoints(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
-{
- memset(&AudioInterfaceInfo->State, 0x00, sizeof(AudioInterfaceInfo->State));
-
- AudioInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_ISOCHRONOUS;
- AudioInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_ISOCHRONOUS;
-
- if (!(Endpoint_ConfigureEndpointTable(&AudioInterfaceInfo->Config.DataINEndpoint, 1)))
- return false;
-
- if (!(Endpoint_ConfigureEndpointTable(&AudioInterfaceInfo->Config.DataOUTEndpoint, 1)))
- return false;
-
- return true;
-}
-
-// cppcheck-suppress unusedFunction
-void Audio_Device_Event_Stub(void)
-{
-
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h deleted file mode 100644 index 09a832808..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/AudioClassDevice.h +++ /dev/null @@ -1,396 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Device mode driver for the library USB Audio 1.0 Class driver.
- *
- * Device mode driver for the library USB Audio 1.0 Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassAudio
- * \defgroup Group_USBClassAudioDevice Audio 1.0 Class Device Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/AudioClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Device Mode USB Class driver framework interface, for the Audio 1.0 USB Class driver.
- *
- * @{
- */
-
-#ifndef _AUDIO_CLASS_DEVICE_H_
-#define _AUDIO_CLASS_DEVICE_H_
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/AudioClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_AUDIO_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** \brief Audio Class Device Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made for each Audio interface
- * within the user application, and passed to each of the Audio class driver functions as the
- * \c AudioInterfaceInfo parameter. This stores each Audio interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- uint8_t ControlInterfaceNumber; /**< Index of the Audio Control interface within the device this
- * structure controls.
- */
- uint8_t StreamingInterfaceNumber; /**< Index of the Audio Streaming interface within the device this
- * structure controls.
- */
-
- USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */
- USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool InterfaceEnabled; /**< Set and cleared by the class driver to indicate if the host has enabled the streaming endpoints
- * of the Audio Streaming interface.
- */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * are reset to their defaults when the interface is enumerated.
- */
- } USB_ClassInfo_Audio_Device_t;
-
- /* Function Prototypes: */
- /** Configures the endpoints of a given Audio interface, ready for use. This should be linked to the library
- * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration containing the
- * given Audio interface is selected.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Boolean \c true if the endpoints were successfully configured, \c false otherwise.
- */
- bool Audio_Device_ConfigureEndpoints(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Processes incoming control requests from the host, that are directed to the given Audio class interface. This should be
- * linked to the library \ref EVENT_USB_Device_ControlRequest() event.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- */
- void Audio_Device_ProcessControlRequest(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Audio class driver callback for the setting and retrieval of streaming endpoint properties. This callback must be implemented
- * in the user application to handle property manipulations on streaming audio endpoints.
- *
- * When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
- * the given endpoint index, and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- * to indicate the size of the retrieved data.
- *
- * \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
- * of the \c DataLength parameter.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- * \param[in] EndpointProperty Property of the endpoint to get or set, a value from \ref Audio_ClassRequests_t.
- * \param[in] EndpointAddress Address of the streaming endpoint whose property is being referenced.
- * \param[in] EndpointControl Parameter of the endpoint to get or set, a value from \ref Audio_EndpointControls_t.
- * \param[in,out] DataLength For SET operations, the length of the parameter data to set. For GET operations, the maximum
- * length of the retrieved data. When NULL, the function should return whether the given property
- * and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
- * \param[in,out] Data Pointer to a location where the parameter data is stored for SET operations, or where
- * the retrieved data is to be stored for GET operations.
- *
- * \return Boolean \c true if the property GET/SET was successful, \c false otherwise
- */
- bool CALLBACK_Audio_Device_GetSetEndpointProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
- const uint8_t EndpointProperty,
- const uint8_t EndpointAddress,
- const uint8_t EndpointControl,
- uint16_t* const DataLength,
- uint8_t* Data) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Audio class driver callback for the setting and retrieval of streaming interface properties. This callback must be implemented
- * in the user application to handle property manipulations on streaming audio interfaces.
- *
- * When the DataLength parameter is NULL, this callback should only indicate whether the specified operation is valid for
- * the given entity and should return as fast as possible. When non-NULL, this value may be altered for GET operations
- * to indicate the size of the retrieved data.
- *
- * \note The length of the retrieved data stored into the Data buffer on GET operations should not exceed the initial value
- * of the \c DataLength parameter.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- * \param[in] Property Property of the interface to get or set, a value from \ref Audio_ClassRequests_t.
- * \param[in] EntityAddress Address of the audio entity whose property is being referenced.
- * \param[in] Parameter Parameter of the entity to get or set, specific to each type of entity (see USB Audio specification).
- * \param[in,out] DataLength For SET operations, the length of the parameter data to set. For GET operations, the maximum
- * length of the retrieved data. When NULL, the function should return whether the given property
- * and parameter is valid for the requested endpoint without reading or modifying the Data buffer.
- * \param[in,out] Data Pointer to a location where the parameter data is stored for SET operations, or where
- * the retrieved data is to be stored for GET operations.
- *
- * \return Boolean \c true if the property GET/SET was successful, \c false otherwise
- */
- bool CALLBACK_Audio_Device_GetSetInterfaceProperty(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
- const uint8_t Property,
- const uint8_t EntityAddress,
- const uint16_t Parameter,
- uint16_t* const DataLength,
- uint8_t* Data) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Audio class driver event for an Audio Stream start/stop change. This event fires each time the device receives a stream enable or
- * disable control request from the host, to start and stop the audio stream. The current state of the stream can be determined by the
- * State.InterfaceEnabled value inside the Audio interface structure passed as a parameter.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- */
- void EVENT_Audio_Device_StreamStartStop(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo);
-
- /* Inline Functions: */
- /** General management task for a given Audio class interface, required for the correct operation of the interface. This should
- * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- */
- static inline void Audio_Device_USBTask(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void Audio_Device_USBTask(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- {
- (void)AudioInterfaceInfo;
- }
-
- /** Determines if the given audio interface is ready for a sample to be read from it, and selects the streaming
- * OUT endpoint ready for reading.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Boolean \c true if the given Audio interface has a sample to be read, \c false otherwise.
- */
- static inline bool Audio_Device_IsSampleReceived(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline bool Audio_Device_IsSampleReceived(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- {
- if ((USB_DeviceState != DEVICE_STATE_Configured) || !(AudioInterfaceInfo->State.InterfaceEnabled))
- return false;
-
- Endpoint_SelectEndpoint(AudioInterfaceInfo->Config.DataOUTEndpoint.Address);
- return Endpoint_IsOUTReceived();
- }
-
- /** Determines if the given audio interface is ready to accept the next sample to be written to it, and selects
- * the streaming IN endpoint ready for writing.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Boolean \c true if the given Audio interface is ready to accept the next sample, \c false otherwise.
- */
- static inline bool Audio_Device_IsReadyForNextSample(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline bool Audio_Device_IsReadyForNextSample(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- {
- if ((USB_DeviceState != DEVICE_STATE_Configured) || !(AudioInterfaceInfo->State.InterfaceEnabled))
- return false;
-
- Endpoint_SelectEndpoint(AudioInterfaceInfo->Config.DataINEndpoint.Address);
- return Endpoint_IsINReady();
- }
-
- /** Reads the next 8-bit audio sample from the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsSampleReceived() function to ensure
- * that the correct endpoint is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Signed 8-bit audio sample from the audio interface.
- */
- static inline int8_t Audio_Device_ReadSample8(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline int8_t Audio_Device_ReadSample8(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- {
- int8_t Sample;
-
- (void)AudioInterfaceInfo;
-
- Sample = Endpoint_Read_8();
-
- if (!(Endpoint_BytesInEndpoint()))
- Endpoint_ClearOUT();
-
- return Sample;
- }
-
- /** Reads the next 16-bit audio sample from the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsSampleReceived() function to ensure
- * that the correct endpoint is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Signed 16-bit audio sample from the audio interface.
- */
- static inline int16_t Audio_Device_ReadSample16(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline int16_t Audio_Device_ReadSample16(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- {
- int16_t Sample;
-
- (void)AudioInterfaceInfo;
-
- Sample = (int16_t)Endpoint_Read_16_LE();
-
- if (!(Endpoint_BytesInEndpoint()))
- Endpoint_ClearOUT();
-
- return Sample;
- }
-
- /** Reads the next 24-bit audio sample from the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsSampleReceived() function to ensure
- * that the correct endpoint is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Signed 24-bit audio sample from the audio interface.
- */
- static inline int32_t Audio_Device_ReadSample24(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline int32_t Audio_Device_ReadSample24(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- {
- int32_t Sample;
-
- (void)AudioInterfaceInfo;
-
- Sample = (((uint32_t)Endpoint_Read_8() << 16) | Endpoint_Read_16_LE());
-
- if (!(Endpoint_BytesInEndpoint()))
- Endpoint_ClearOUT();
-
- return Sample;
- }
-
- /** Writes the next 8-bit audio sample to the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsReadyForNextSample() function to
- * ensure that the correct endpoint is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- * \param[in] Sample Signed 8-bit audio sample.
- */
- static inline void Audio_Device_WriteSample8(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
- const int8_t Sample) ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void Audio_Device_WriteSample8(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
- const int8_t Sample)
- {
- Endpoint_Write_8(Sample);
-
- if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpoint.Size)
- Endpoint_ClearIN();
- }
-
- /** Writes the next 16-bit audio sample to the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsReadyForNextSample() function to
- * ensure that the correct endpoint is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- * \param[in] Sample Signed 16-bit audio sample.
- */
- static inline void Audio_Device_WriteSample16(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
- const int16_t Sample) ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void Audio_Device_WriteSample16(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
- const int16_t Sample)
- {
- Endpoint_Write_16_LE(Sample);
-
- if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpoint.Size)
- Endpoint_ClearIN();
- }
-
- /** Writes the next 24-bit audio sample to the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsReadyForNextSample() function to
- * ensure that the correct endpoint is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- * \param[in] Sample Signed 24-bit audio sample.
- */
- static inline void Audio_Device_WriteSample24(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
- const int32_t Sample) ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void Audio_Device_WriteSample24(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo,
- const int32_t Sample)
- {
- Endpoint_Write_16_LE(Sample);
- Endpoint_Write_8(Sample >> 16);
-
- if (Endpoint_BytesInEndpoint() == AudioInterfaceInfo->Config.DataINEndpoint.Size)
- Endpoint_ClearIN();
- }
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_AUDIO_DEVICE_C)
- void Audio_Device_Event_Stub(void) ATTR_CONST;
-
- void EVENT_Audio_Device_StreamStartStop(USB_ClassInfo_Audio_Device_t* const AudioInterfaceInfo)
- ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(Audio_Device_Event_Stub);
- #endif
-
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c deleted file mode 100644 index e77aa280b..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/CDCClassDevice.c +++ /dev/null @@ -1,339 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#define __INCLUDE_FROM_CDC_DRIVER
-#define __INCLUDE_FROM_CDC_DEVICE_C
-#include "CDCClassDevice.h"
-
-void CDC_Device_ProcessControlRequest(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
- if (!(Endpoint_IsSETUPReceived()))
- return;
-
- if (USB_ControlRequest.wIndex != CDCInterfaceInfo->Config.ControlInterfaceNumber)
- return;
-
- switch (USB_ControlRequest.bRequest)
- {
- case CDC_REQ_GetLineEncoding:
- if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
-
- while (!(Endpoint_IsINReady()));
-
- Endpoint_Write_32_LE(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
- Endpoint_Write_8(CDCInterfaceInfo->State.LineEncoding.CharFormat);
- Endpoint_Write_8(CDCInterfaceInfo->State.LineEncoding.ParityType);
- Endpoint_Write_8(CDCInterfaceInfo->State.LineEncoding.DataBits);
-
- Endpoint_ClearIN();
- Endpoint_ClearStatusStage();
- }
-
- break;
- case CDC_REQ_SetLineEncoding:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
-
- while (!(Endpoint_IsOUTReceived()))
- {
- if (USB_DeviceState == DEVICE_STATE_Unattached)
- return;
- }
-
- CDCInterfaceInfo->State.LineEncoding.BaudRateBPS = Endpoint_Read_32_LE();
- CDCInterfaceInfo->State.LineEncoding.CharFormat = Endpoint_Read_8();
- CDCInterfaceInfo->State.LineEncoding.ParityType = Endpoint_Read_8();
- CDCInterfaceInfo->State.LineEncoding.DataBits = Endpoint_Read_8();
-
- Endpoint_ClearOUT();
- Endpoint_ClearStatusStage();
-
- EVENT_CDC_Device_LineEncodingChanged(CDCInterfaceInfo);
- }
-
- break;
- case CDC_REQ_SetControlLineState:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
- Endpoint_ClearStatusStage();
-
- CDCInterfaceInfo->State.ControlLineStates.HostToDevice = USB_ControlRequest.wValue;
-
- EVENT_CDC_Device_ControLineStateChanged(CDCInterfaceInfo);
- }
-
- break;
- case CDC_REQ_SendBreak:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
- Endpoint_ClearStatusStage();
-
- EVENT_CDC_Device_BreakSent(CDCInterfaceInfo, (uint8_t)USB_ControlRequest.wValue);
- }
-
- break;
- }
-}
-
-bool CDC_Device_ConfigureEndpoints(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
- memset(&CDCInterfaceInfo->State, 0x00, sizeof(CDCInterfaceInfo->State));
-
- CDCInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK;
- CDCInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK;
- CDCInterfaceInfo->Config.NotificationEndpoint.Type = EP_TYPE_INTERRUPT;
-
- if (!(Endpoint_ConfigureEndpointTable(&CDCInterfaceInfo->Config.DataINEndpoint, 1)))
- return false;
-
- if (!(Endpoint_ConfigureEndpointTable(&CDCInterfaceInfo->Config.DataOUTEndpoint, 1)))
- return false;
-
- if (!(Endpoint_ConfigureEndpointTable(&CDCInterfaceInfo->Config.NotificationEndpoint, 1)))
- return false;
-
- return true;
-}
-
-void CDC_Device_USBTask(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
- if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS))
- return;
-
- #if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
- CDC_Device_Flush(CDCInterfaceInfo);
- #endif
-}
-
-uint8_t CDC_Device_SendString(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- const char* const String)
-{
- if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS))
- return ENDPOINT_RWSTREAM_DeviceDisconnected;
-
- Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address);
- return Endpoint_Write_Stream_LE(String, strlen(String), NULL);
-}
-
-uint8_t CDC_Device_SendData(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- const char* const Buffer,
- const uint16_t Length)
-{
- if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS))
- return ENDPOINT_RWSTREAM_DeviceDisconnected;
-
- Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address);
- return Endpoint_Write_Stream_LE(Buffer, Length, NULL);
-}
-
-uint8_t CDC_Device_SendByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- const uint8_t Data)
-{
- if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS))
- return ENDPOINT_RWSTREAM_DeviceDisconnected;
-
- Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address);
-
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearIN();
-
- uint8_t ErrorCode;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()) != ENDPOINT_READYWAIT_NoError)
- return ErrorCode;
- }
-
- Endpoint_Write_8(Data);
- return ENDPOINT_READYWAIT_NoError;
-}
-
-uint8_t CDC_Device_Flush(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
- if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS))
- return ENDPOINT_RWSTREAM_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataINEndpoint.Address);
-
- if (!(Endpoint_BytesInEndpoint()))
- return ENDPOINT_READYWAIT_NoError;
-
- bool BankFull = !(Endpoint_IsReadWriteAllowed());
-
- Endpoint_ClearIN();
-
- if (BankFull)
- {
- if ((ErrorCode = Endpoint_WaitUntilReady()) != ENDPOINT_READYWAIT_NoError)
- return ErrorCode;
-
- Endpoint_ClearIN();
- }
-
- return ENDPOINT_READYWAIT_NoError;
-}
-
-uint16_t CDC_Device_BytesReceived(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
- if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS))
- return 0;
-
- Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataOUTEndpoint.Address);
-
- if (Endpoint_IsOUTReceived())
- {
- if (!(Endpoint_BytesInEndpoint()))
- {
- Endpoint_ClearOUT();
- return 0;
- }
- else
- {
- return Endpoint_BytesInEndpoint();
- }
- }
- else
- {
- return 0;
- }
-}
-
-int16_t CDC_Device_ReceiveByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
- if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS))
- return -1;
-
- int16_t ReceivedByte = -1;
-
- Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.DataOUTEndpoint.Address);
-
- if (Endpoint_IsOUTReceived())
- {
- if (Endpoint_BytesInEndpoint())
- ReceivedByte = Endpoint_Read_8();
-
- if (!(Endpoint_BytesInEndpoint()))
- Endpoint_ClearOUT();
- }
-
- return ReceivedByte;
-}
-
-void CDC_Device_SendControlLineStateChange(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
-{
- if ((USB_DeviceState != DEVICE_STATE_Configured) || !(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS))
- return;
-
- Endpoint_SelectEndpoint(CDCInterfaceInfo->Config.NotificationEndpoint.Address);
-
- USB_Request_Header_t Notification = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = CDC_NOTIF_SerialState,
- .wValue = CPU_TO_LE16(0),
- .wIndex = CPU_TO_LE16(0),
- .wLength = CPU_TO_LE16(sizeof(CDCInterfaceInfo->State.ControlLineStates.DeviceToHost)),
- };
-
- Endpoint_Write_Stream_LE(&Notification, sizeof(USB_Request_Header_t), NULL);
- Endpoint_Write_Stream_LE(&CDCInterfaceInfo->State.ControlLineStates.DeviceToHost,
- sizeof(CDCInterfaceInfo->State.ControlLineStates.DeviceToHost),
- NULL);
- Endpoint_ClearIN();
-}
-
-#if defined(FDEV_SETUP_STREAM)
-void CDC_Device_CreateStream(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- FILE* const Stream)
-{
- *Stream = (FILE)FDEV_SETUP_STREAM(CDC_Device_putchar, CDC_Device_getchar, _FDEV_SETUP_RW);
- fdev_set_udata(Stream, CDCInterfaceInfo);
-}
-
-void CDC_Device_CreateBlockingStream(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- FILE* const Stream)
-{
- *Stream = (FILE)FDEV_SETUP_STREAM(CDC_Device_putchar, CDC_Device_getchar_Blocking, _FDEV_SETUP_RW);
- fdev_set_udata(Stream, CDCInterfaceInfo);
-}
-
-static int CDC_Device_putchar(char c,
- FILE* Stream)
-{
- return CDC_Device_SendByte((USB_ClassInfo_CDC_Device_t*)fdev_get_udata(Stream), c) ? _FDEV_ERR : 0;
-}
-
-static int CDC_Device_getchar(FILE* Stream)
-{
- int16_t ReceivedByte = CDC_Device_ReceiveByte((USB_ClassInfo_CDC_Device_t*)fdev_get_udata(Stream));
-
- if (ReceivedByte < 0)
- return _FDEV_EOF;
-
- return ReceivedByte;
-}
-
-static int CDC_Device_getchar_Blocking(FILE* Stream)
-{
- int16_t ReceivedByte;
-
- while ((ReceivedByte = CDC_Device_ReceiveByte((USB_ClassInfo_CDC_Device_t*)fdev_get_udata(Stream))) < 0)
- {
- if (USB_DeviceState == DEVICE_STATE_Unattached)
- return _FDEV_EOF;
-
- CDC_Device_USBTask((USB_ClassInfo_CDC_Device_t*)fdev_get_udata(Stream));
- USB_USBTask();
- }
-
- return ReceivedByte;
-}
-#endif
-
-// cppcheck-suppress unusedFunction
-void CDC_Device_Event_Stub(void)
-{
-
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h deleted file mode 100644 index a4528d1dd..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/CDCClassDevice.h +++ /dev/null @@ -1,352 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Device mode driver for the library USB CDC Class driver.
- *
- * Device mode driver for the library USB CDC Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassCDC
- * \defgroup Group_USBClassCDCDevice CDC Class Device Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/CDCClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Device Mode USB Class driver framework interface, for the CDC USB Class driver.
- *
- * \note There are several major drawbacks to the CDC-ACM standard USB class, however
- * it is very standardized and thus usually available as a built-in driver on
- * most platforms, and so is a better choice than a proprietary serial class.
- *
- * One major issue with CDC-ACM is that it requires two Interface descriptors,
- * which will upset most hosts when part of a multi-function "Composite" USB
- * device. This is because each interface will be loaded into a separate driver
- * instance, causing the two interfaces be become unlinked. To prevent this, you
- * should use the "Interface Association Descriptor" addendum to the USB 2.0 standard
- * which is available on most OSes when creating Composite devices.
- *
- * Another major oversight is that there is no mechanism for the host to notify the
- * device that there is a data sink on the host side ready to accept data. This
- * means that the device may try to send data while the host isn't listening, causing
- * lengthy blocking timeouts in the transmission routines. It is thus highly recommended
- * that the virtual serial line DTR (Data Terminal Ready) signal be used where possible
- * to determine if a host application is ready for data.
- *
- * @{
- */
-
-#ifndef _CDC_CLASS_DEVICE_H_
-#define _CDC_CLASS_DEVICE_H_
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/CDCClassCommon.h"
-
- #include <stdio.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_CDC_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** \brief CDC Class Device Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made for each CDC interface
- * within the user application, and passed to each of the CDC class driver functions as the
- * CDCInterfaceInfo parameter. This stores each CDC interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- uint8_t ControlInterfaceNumber; /**< Interface number of the CDC control interface within the device. */
-
- USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */
- USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */
- USB_Endpoint_Table_t NotificationEndpoint; /**< Notification IN Endpoint configuration table. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- struct
- {
- uint16_t HostToDevice; /**< Control line states from the host to device, as a set of \c CDC_CONTROL_LINE_OUT_*
- * masks. This value is updated each time \ref CDC_Device_USBTask() is called.
- */
- uint16_t DeviceToHost; /**< Control line states from the device to host, as a set of \c CDC_CONTROL_LINE_IN_*
- * masks - to notify the host of changes to these values, call the
- * \ref CDC_Device_SendControlLineStateChange() function.
- */
- } ControlLineStates; /**< Current states of the virtual serial port's control lines between the device and host. */
-
- CDC_LineEncoding_t LineEncoding; /** Line encoding used in the virtual serial port, for the device's information.
- * This is generally only used if the virtual serial port data is to be
- * reconstructed on a physical UART.
- */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * are reset to their defaults when the interface is enumerated.
- */
- } USB_ClassInfo_CDC_Device_t;
-
- /* Function Prototypes: */
- /** Configures the endpoints of a given CDC interface, ready for use. This should be linked to the library
- * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration containing
- * the given CDC interface is selected.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- *
- * \return Boolean \c true if the endpoints were successfully configured, \c false otherwise.
- */
- bool CDC_Device_ConfigureEndpoints(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Processes incoming control requests from the host, that are directed to the given CDC class interface. This should be
- * linked to the library \ref EVENT_USB_Device_ControlRequest() event.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- */
- void CDC_Device_ProcessControlRequest(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** General management task for a given CDC class interface, required for the correct operation of the interface. This should
- * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- */
- void CDC_Device_USBTask(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** CDC class driver event for a line encoding change on a CDC interface. This event fires each time the host requests a
- * line encoding change (containing the serial parity, baud and other configuration information) and may be hooked in the
- * user program by declaring a handler function with the same name and parameters listed here. The new line encoding
- * settings are available in the LineEncoding structure inside the CDC interface structure passed as a parameter.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- */
- void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** CDC class driver event for a control line state change on a CDC interface. This event fires each time the host requests a
- * control line state change (containing the virtual serial control line states, such as DTR) and may be hooked in the
- * user program by declaring a handler function with the same name and parameters listed here. The new control line states
- * are available in the \c ControlLineStates.HostToDevice value inside the CDC interface structure passed as a parameter, set as
- * a mask of \c CDC_CONTROL_LINE_OUT_* masks.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- */
- void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** CDC class driver event for a send break request sent to the device from the host. This is generally used to separate
- * data or to indicate a special condition to the receiving device.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- * \param[in] Duration Duration of the break that has been sent by the host, in milliseconds.
- */
- void EVENT_CDC_Device_BreakSent(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- const uint8_t Duration) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a given data buffer to the attached USB host, if connected. If a host is not connected when the function is
- * called, the string is discarded. Bytes will be queued for transmission to the host until either the endpoint bank
- * becomes full, or the \ref CDC_Device_Flush() function is called to flush the pending data to the host. This allows
- * for multiple bytes to be packed into a single endpoint packet, increasing data throughput.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- * \param[in] Buffer Pointer to a buffer containing the data to send to the device.
- * \param[in] Length Length of the data to send to the host.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t CDC_Device_SendData(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- const char* const Buffer,
- const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Sends a given null terminated string to the attached USB host, if connected. If a host is not connected when
- * the function is called, the string is discarded. Bytes will be queued for transmission to the host until either
- * the endpoint bank becomes full, or the \ref CDC_Device_Flush() function is called to flush the pending data to
- * the host. This allows for multiple bytes to be packed into a single endpoint packet, increasing data throughput.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- * \param[in] String Pointer to the null terminated string to send to the host.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t CDC_Device_SendString(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- const char* const String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Sends a given byte to the attached USB host, if connected. If a host is not connected when the function is called, the
- * byte is discarded. Bytes will be queued for transmission to the host until either the endpoint bank becomes full, or the
- * \ref CDC_Device_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
- * packed into a single endpoint packet, increasing data throughput.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- * \param[in] Data Byte of data to send to the host.
- *
- * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t CDC_Device_SendByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Determines the number of bytes received by the CDC interface from the host, waiting to be read. This indicates the number
- * of bytes in the OUT endpoint bank only, and thus the number of calls to \ref CDC_Device_ReceiveByte() which are guaranteed to
- * succeed immediately. If multiple bytes are to be received, they should be buffered by the user application, as the endpoint
- * bank will not be released back to the USB controller until all bytes are read.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- *
- * \return Total number of buffered bytes received from the host.
- */
- uint16_t CDC_Device_BytesReceived(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads a byte of data from the host. If no data is waiting to be read of if a USB host is not connected, the function
- * returns a negative value. The \ref CDC_Device_BytesReceived() function may be queried in advance to determine how many
- * bytes are currently buffered in the CDC interface's data receive endpoint bank, and thus how many repeated calls to this
- * function which are guaranteed to succeed.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- *
- * \return Next received byte from the host, or a negative value if no data received.
- */
- int16_t CDC_Device_ReceiveByte(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- *
- * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t CDC_Device_Flush(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a Serial Control Line State Change notification to the host. This should be called when the virtual serial
- * control lines (DCD, DSR, etc.) have changed states, or to give BREAK notifications to the host. Line states persist
- * until they are cleared via a second notification. This should be called each time the CDC class driver's
- * \c ControlLineStates.DeviceToHost value is updated to push the new states to the USB host.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- */
- void CDC_Device_SendControlLineStateChange(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- #if defined(FDEV_SETUP_STREAM) || defined(__DOXYGEN__)
- /** Creates a standard character stream for the given CDC Device instance so that it can be used with all the regular
- * functions in the standard <stdio.h> library that accept a \c FILE stream as a destination (e.g. \c fprintf()). The created
- * stream is bidirectional and can be used for both input and output functions.
- *
- * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single
- * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may
- * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own
- * line buffering.
- *
- * \note The created stream can be given as \c stdout if desired to direct the standard output from all <stdio.h> functions
- * to the given CDC interface.
- * \n\n
- *
- * \note This function is not available on all microcontroller architectures.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed.
- */
- void CDC_Device_CreateStream(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- FILE* const Stream) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Identical to \ref CDC_Device_CreateStream(), except that reads are blocking until the calling stream function terminates
- * the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications.
- *
- * \note This function is not available on all microcontroller architectures.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed.
- */
- void CDC_Device_CreateBlockingStream(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- FILE* const Stream) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_CDC_DEVICE_C)
- #if defined(FDEV_SETUP_STREAM)
- static int CDC_Device_putchar(char c,
- FILE* Stream) ATTR_NON_NULL_PTR_ARG(2);
- static int CDC_Device_getchar(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1);
- static int CDC_Device_getchar_Blocking(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1);
- #endif
-
- void CDC_Device_Event_Stub(void) ATTR_CONST;
-
- void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
- ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Device_Event_Stub);
- void EVENT_CDC_Device_ControLineStateChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
- ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Device_Event_Stub);
- void EVENT_CDC_Device_BreakSent(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo,
- const uint8_t Duration) ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1)
- ATTR_ALIAS(CDC_Device_Event_Stub);
- #endif
-
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c deleted file mode 100644 index a56747b08..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/HIDClassDevice.c +++ /dev/null @@ -1,200 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#define __INCLUDE_FROM_HID_DRIVER
-#define __INCLUDE_FROM_HID_DEVICE_C
-#include "HIDClassDevice.h"
-
-void HID_Device_ProcessControlRequest(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo)
-{
- if (!(Endpoint_IsSETUPReceived()))
- return;
-
- if (USB_ControlRequest.wIndex != HIDInterfaceInfo->Config.InterfaceNumber)
- return;
-
- switch (USB_ControlRequest.bRequest)
- {
- case HID_REQ_GetReport:
- if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- uint16_t ReportSize = 0;
- uint8_t ReportID = (USB_ControlRequest.wValue & 0xFF);
- uint8_t ReportType = (USB_ControlRequest.wValue >> 8) - 1;
- uint8_t ReportData[HIDInterfaceInfo->Config.PrevReportINBufferSize];
-
- memset(ReportData, 0, sizeof(ReportData));
-
- CALLBACK_HID_Device_CreateHIDReport(HIDInterfaceInfo, &ReportID, ReportType, ReportData, &ReportSize);
-
- if (HIDInterfaceInfo->Config.PrevReportINBuffer != NULL)
- {
- memcpy(HIDInterfaceInfo->Config.PrevReportINBuffer, ReportData,
- HIDInterfaceInfo->Config.PrevReportINBufferSize);
- }
-
- Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
-
- Endpoint_ClearSETUP();
- Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
- Endpoint_ClearOUT();
- }
-
- break;
- case HID_REQ_SetReport:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- uint16_t ReportSize = USB_ControlRequest.wLength;
- uint8_t ReportID = (USB_ControlRequest.wValue & 0xFF);
- uint8_t ReportType = (USB_ControlRequest.wValue >> 8) - 1;
- uint8_t ReportData[ReportSize];
-
- Endpoint_ClearSETUP();
- Endpoint_Read_Control_Stream_LE(ReportData, ReportSize);
- Endpoint_ClearIN();
-
- CALLBACK_HID_Device_ProcessHIDReport(HIDInterfaceInfo, ReportID, ReportType,
- &ReportData[ReportID ? 1 : 0], ReportSize - (ReportID ? 1 : 0));
- }
-
- break;
- case HID_REQ_GetProtocol:
- if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
- while (!(Endpoint_IsINReady()));
- Endpoint_Write_8(HIDInterfaceInfo->State.UsingReportProtocol);
- Endpoint_ClearIN();
- Endpoint_ClearStatusStage();
- }
-
- break;
- case HID_REQ_SetProtocol:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
- Endpoint_ClearStatusStage();
-
- HIDInterfaceInfo->State.UsingReportProtocol = ((USB_ControlRequest.wValue & 0xFF) != 0x00);
- }
-
- break;
- case HID_REQ_SetIdle:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
- Endpoint_ClearStatusStage();
-
- HIDInterfaceInfo->State.IdleCount = ((USB_ControlRequest.wValue & 0xFF00) >> 6);
- }
-
- break;
- case HID_REQ_GetIdle:
- if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
- while (!(Endpoint_IsINReady()));
- Endpoint_Write_8(HIDInterfaceInfo->State.IdleCount >> 2);
- Endpoint_ClearIN();
- Endpoint_ClearStatusStage();
- }
-
- break;
- }
-}
-
-bool HID_Device_ConfigureEndpoints(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo)
-{
- memset(&HIDInterfaceInfo->State, 0x00, sizeof(HIDInterfaceInfo->State));
- HIDInterfaceInfo->State.UsingReportProtocol = true;
- HIDInterfaceInfo->State.IdleCount = 500;
-
- HIDInterfaceInfo->Config.ReportINEndpoint.Type = EP_TYPE_INTERRUPT;
-
- if (!(Endpoint_ConfigureEndpointTable(&HIDInterfaceInfo->Config.ReportINEndpoint, 1)))
- return false;
-
- return true;
-}
-
-void HID_Device_USBTask(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo)
-{
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return;
-
- if (HIDInterfaceInfo->State.PrevFrameNum == USB_Device_GetFrameNumber())
- return;
-
- Endpoint_SelectEndpoint(HIDInterfaceInfo->Config.ReportINEndpoint.Address);
-
- if (Endpoint_IsReadWriteAllowed())
- {
- uint8_t ReportINData[HIDInterfaceInfo->Config.PrevReportINBufferSize];
- uint8_t ReportID = 0;
- uint16_t ReportINSize = 0;
-
- memset(ReportINData, 0, sizeof(ReportINData));
-
- bool ForceSend = CALLBACK_HID_Device_CreateHIDReport(HIDInterfaceInfo, &ReportID, HID_REPORT_ITEM_In,
- ReportINData, &ReportINSize);
- bool StatesChanged = false;
- bool IdlePeriodElapsed = (HIDInterfaceInfo->State.IdleCount && !(HIDInterfaceInfo->State.IdleMSRemaining));
-
- if (HIDInterfaceInfo->Config.PrevReportINBuffer != NULL)
- {
- StatesChanged = (memcmp(ReportINData, HIDInterfaceInfo->Config.PrevReportINBuffer, ReportINSize) != 0);
- memcpy(HIDInterfaceInfo->Config.PrevReportINBuffer, ReportINData, HIDInterfaceInfo->Config.PrevReportINBufferSize);
- }
-
- if (ReportINSize && (ForceSend || StatesChanged || IdlePeriodElapsed))
- {
- HIDInterfaceInfo->State.IdleMSRemaining = HIDInterfaceInfo->State.IdleCount;
-
- Endpoint_SelectEndpoint(HIDInterfaceInfo->Config.ReportINEndpoint.Address);
-
- if (ReportID)
- Endpoint_Write_8(ReportID);
-
- Endpoint_Write_Stream_LE(ReportINData, ReportINSize, NULL);
-
- Endpoint_ClearIN();
- }
-
- HIDInterfaceInfo->State.PrevFrameNum = USB_Device_GetFrameNumber();
- }
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h deleted file mode 100644 index ea2125772..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/HIDClassDevice.h +++ /dev/null @@ -1,210 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Device mode driver for the library USB HID Class driver.
- *
- * Device mode driver for the library USB HID Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassHID
- * \defgroup Group_USBClassHIDDevice HID Class Device Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/HIDClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Device Mode USB Class driver framework interface, for the HID USB Class driver.
- *
- * @{
- */
-
-#ifndef _HID_CLASS_DEVICE_H_
-#define _HID_CLASS_DEVICE_H_
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/HIDClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_HID_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** \brief HID Class Device Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made for each HID interface
- * within the user application, and passed to each of the HID class driver functions as the
- * \c HIDInterfaceInfo parameter. This stores each HID interface's configuration and state information.
- *
- * \note Due to technical limitations, the HID device class driver does not utilize a separate OUT
- * endpoint for host->device communications. Instead, the host->device data (if any) is sent to
- * the device via the control endpoint.
- */
- typedef struct
- {
- struct
- {
- uint8_t InterfaceNumber; /**< Interface number of the HID interface within the device. */
-
- USB_Endpoint_Table_t ReportINEndpoint; /**< Data IN HID report endpoint configuration table. */
-
- void* PrevReportINBuffer; /**< Pointer to a buffer where the previously created HID input report can be
- * stored by the driver, for comparison purposes to detect report changes that
- * must be sent immediately to the host. This should point to a buffer big enough
- * to hold the largest HID input report sent from the HID interface. If this is set
- * to \c NULL, it is up to the user to force transfers when needed in the
- * \ref CALLBACK_HID_Device_CreateHIDReport() callback function.
- *
- * \note Due to the single buffer, the internal driver can only correctly compare
- * subsequent reports with identical report IDs. In multiple report devices,
- * this buffer should be set to \c NULL and the decision to send reports made
- * by the user application instead.
- */
- uint8_t PrevReportINBufferSize; /**< Size in bytes of the given input report buffer. This is used to create a
- * second buffer of the same size within the driver so that subsequent reports
- * can be compared. If the user app is to determine when reports are to be sent
- * exclusively (i.e. \ref PrevReportINBuffer is \c NULL) this value must still be
- * set to the size of the largest report the device can issue to the host.
- */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool UsingReportProtocol; /**< Indicates if the HID interface is set to Boot or Report protocol mode. */
- uint16_t PrevFrameNum; /**< Frame number of the previous HID report packet opportunity. */
- uint16_t IdleCount; /**< Report idle period, in milliseconds, set by the host. */
- uint16_t IdleMSRemaining; /**< Total number of milliseconds remaining before the idle period elapsed - this
- * should be decremented by the user application if non-zero each millisecond. */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * are reset to their defaults when the interface is enumerated.
- */
- } USB_ClassInfo_HID_Device_t;
-
- /* Function Prototypes: */
- /** Configures the endpoints of a given HID interface, ready for use. This should be linked to the library
- * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration
- * containing the given HID interface is selected.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state.
- *
- * \return Boolean \c true if the endpoints were successfully configured, \c false otherwise.
- */
- bool HID_Device_ConfigureEndpoints(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Processes incoming control requests from the host, that are directed to the given HID class interface. This should be
- * linked to the library \ref EVENT_USB_Device_ControlRequest() event.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state.
- */
- void HID_Device_ProcessControlRequest(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** General management task for a given HID class interface, required for the correct operation of the interface. This should
- * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state.
- */
- void HID_Device_USBTask(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** HID class driver callback for the user creation of a HID IN report. This callback may fire in response to either
- * HID class control requests from the host, or by the normal HID endpoint polling procedure. Inside this callback the
- * user is responsible for the creation of the next HID input report to be sent to the host.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state.
- * \param[in,out] ReportID If preset to a non-zero value, this is the report ID being requested by the host. If zero,
- * this should be set to the report ID of the generated HID input report (if any). If multiple
- * reports are not sent via the given HID interface, this parameter should be ignored.
- * \param[in] ReportType Type of HID report to generate, either \ref HID_REPORT_ITEM_In or \ref HID_REPORT_ITEM_Feature.
- * \param[out] ReportData Pointer to a buffer where the generated HID report should be stored.
- * \param[out] ReportSize Number of bytes in the generated input report, or zero if no report is to be sent.
- *
- * \return Boolean \c true to force the sending of the report even if it is identical to the previous report and still within
- * the idle period (useful for devices which report relative movement), \c false otherwise.
- */
- bool CALLBACK_HID_Device_CreateHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
- uint8_t* const ReportID,
- const uint8_t ReportType,
- void* ReportData,
- uint16_t* const ReportSize) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(2) ATTR_NON_NULL_PTR_ARG(4) ATTR_NON_NULL_PTR_ARG(5);
-
- /** HID class driver callback for the user processing of a received HID OUT report. This callback may fire in response to
- * either HID class control requests from the host, or by the normal HID endpoint polling procedure. Inside this callback
- * the user is responsible for the processing of the received HID output report from the host.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state.
- * \param[in] ReportID Report ID of the received output report. If multiple reports are not received via the given HID
- * interface, this parameter should be ignored.
- * \param[in] ReportType Type of received HID report, either \ref HID_REPORT_ITEM_Out or \ref HID_REPORT_ITEM_Feature.
- * \param[in] ReportData Pointer to a buffer where the received HID report is stored.
- * \param[in] ReportSize Size in bytes of the received report from the host.
- */
- void CALLBACK_HID_Device_ProcessHIDReport(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo,
- const uint8_t ReportID,
- const uint8_t ReportType,
- const void* ReportData,
- const uint16_t ReportSize) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(4);
-
- /* Inline Functions: */
- /** Indicates that a millisecond of idle time has elapsed on the given HID interface, and the interface's idle count should be
- * decremented. This should be called once per millisecond so that hardware key-repeats function correctly. It is recommended
- * that this be called by the \ref EVENT_USB_Device_StartOfFrame() event, once SOF events have been enabled via
- * \ref USB_Device_EnableSOFEvents().
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class configuration and state.
- */
- static inline void HID_Device_MillisecondElapsed(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo) ATTR_ALWAYS_INLINE ATTR_NON_NULL_PTR_ARG(1);
- static inline void HID_Device_MillisecondElapsed(USB_ClassInfo_HID_Device_t* const HIDInterfaceInfo)
- {
- if (HIDInterfaceInfo->State.IdleMSRemaining)
- HIDInterfaceInfo->State.IdleMSRemaining--;
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c deleted file mode 100644 index 3ff339c06..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c +++ /dev/null @@ -1,125 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#define __INCLUDE_FROM_MIDI_DRIVER
-#define __INCLUDE_FROM_MIDI_DEVICE_C
-#include "MIDIClassDevice.h"
-
-bool MIDI_Device_ConfigureEndpoints(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo)
-{
- memset(&MIDIInterfaceInfo->State, 0x00, sizeof(MIDIInterfaceInfo->State));
-
- MIDIInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK;
- MIDIInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK;
-
- if (!(Endpoint_ConfigureEndpointTable(&MIDIInterfaceInfo->Config.DataINEndpoint, 1)))
- return false;
-
- if (!(Endpoint_ConfigureEndpointTable(&MIDIInterfaceInfo->Config.DataOUTEndpoint, 1)))
- return false;
-
- return true;
-}
-
-void MIDI_Device_USBTask(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo)
-{
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return;
-
- #if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
- MIDI_Device_Flush(MIDIInterfaceInfo);
- #endif
-}
-
-uint8_t MIDI_Device_SendEventPacket(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo,
- const MIDI_EventPacket_t* const Event)
-{
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return ENDPOINT_RWSTREAM_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpoint.Address);
-
- if ((ErrorCode = Endpoint_Write_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL)) != ENDPOINT_RWSTREAM_NoError)
- return ErrorCode;
-
- if (!(Endpoint_IsReadWriteAllowed()))
- Endpoint_ClearIN();
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-uint8_t MIDI_Device_Flush(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo)
-{
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return ENDPOINT_RWSTREAM_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataINEndpoint.Address);
-
- if (Endpoint_BytesInEndpoint())
- {
- Endpoint_ClearIN();
-
- if ((ErrorCode = Endpoint_WaitUntilReady()) != ENDPOINT_READYWAIT_NoError)
- return ErrorCode;
- }
-
- return ENDPOINT_READYWAIT_NoError;
-}
-
-bool MIDI_Device_ReceiveEventPacket(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo,
- MIDI_EventPacket_t* const Event)
-{
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return false;
-
- Endpoint_SelectEndpoint(MIDIInterfaceInfo->Config.DataOUTEndpoint.Address);
-
- if (!(Endpoint_IsReadWriteAllowed()))
- return false;
-
- Endpoint_Read_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL);
-
- if (!(Endpoint_IsReadWriteAllowed()))
- Endpoint_ClearOUT();
-
- return true;
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h deleted file mode 100644 index c5b01be5d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MIDIClassDevice.h +++ /dev/null @@ -1,175 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Device mode driver for the library USB MIDI Class driver.
- *
- * Device mode driver for the library USB MIDI Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassMIDI
- * \defgroup Group_USBClassMIDIDevice MIDI Class Device Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Device Mode USB Class driver framework interface, for the MIDI USB Class driver.
- *
- * @{
- */
-
-#ifndef _MIDI_CLASS_DEVICE_H_
-#define _MIDI_CLASS_DEVICE_H_
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/MIDIClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_MIDI_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Define: */
- /** \brief MIDI Class Device Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made for each MIDI interface
- * within the user application, and passed to each of the MIDI class driver functions as the
- * \c MIDIInterfaceInfo parameter. This stores each MIDI interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- uint8_t StreamingInterfaceNumber; /**< Index of the Audio Streaming interface within the device this structure controls. */
-
- USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */
- USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
-
- struct
- {
- uint8_t RESERVED; // No state information for this class
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * are reset to their defaults when the interface is enumerated.
- */
- } USB_ClassInfo_MIDI_Device_t;
-
- /* Function Prototypes: */
- /** Configures the endpoints of a given MIDI interface, ready for use. This should be linked to the library
- * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration
- * containing the given MIDI interface is selected.
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state.
- *
- * \return Boolean \c true if the endpoints were successfully configured, \c false otherwise.
- */
- bool MIDI_Device_ConfigureEndpoints(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** General management task for a given MIDI class interface, required for the correct operation of the interface. This should
- * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state.
- */
- void MIDI_Device_USBTask(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a MIDI event packet to the host. If no host is connected, the event packet is discarded. Events are queued into the
- * endpoint bank until either the endpoint bank is full, or \ref MIDI_Device_Flush() is called. This allows for multiple
- * MIDI events to be packed into a single endpoint packet, increasing data throughput.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state.
- * \param[in] Event Pointer to a populated \ref MIDI_EventPacket_t structure containing the MIDI event to send.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t MIDI_Device_SendEventPacket(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo,
- const MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
-
- /** Flushes the MIDI send buffer, sending any queued MIDI events to the host. This should be called to override the
- * \ref MIDI_Device_SendEventPacket() function's packing behavior, to flush queued events.
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state.
- *
- * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t MIDI_Device_Flush(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Receives a MIDI event packet from the host. Events are unpacked from the endpoint, thus if the endpoint bank contains
- * multiple MIDI events from the host in the one packet, multiple calls to this function will return each individual event.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state.
- * \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed.
- *
- * \return Boolean \c true if a MIDI event packet was received, \c false otherwise.
- */
- bool MIDI_Device_ReceiveEventPacket(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo,
- MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /* Inline Functions: */
- /** Processes incoming control requests from the host, that are directed to the given MIDI class interface. This should be
- * linked to the library \ref EVENT_USB_Device_ControlRequest() event.
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state.
- */
- static inline void MIDI_Device_ProcessControlRequest(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
- static inline void MIDI_Device_ProcessControlRequest(USB_ClassInfo_MIDI_Device_t* const MIDIInterfaceInfo)
- {
- (void)MIDIInterfaceInfo;
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c deleted file mode 100644 index 735437e46..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c +++ /dev/null @@ -1,215 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#define __INCLUDE_FROM_MS_DRIVER
-#define __INCLUDE_FROM_MASSSTORAGE_DEVICE_C
-#include "MassStorageClassDevice.h"
-
-void MS_Device_ProcessControlRequest(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- if (!(Endpoint_IsSETUPReceived()))
- return;
-
- if (USB_ControlRequest.wIndex != MSInterfaceInfo->Config.InterfaceNumber)
- return;
-
- switch (USB_ControlRequest.bRequest)
- {
- case MS_REQ_MassStorageReset:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
- Endpoint_ClearStatusStage();
-
- MSInterfaceInfo->State.IsMassStoreReset = true;
- }
-
- break;
- case MS_REQ_GetMaxLUN:
- if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
- while (!(Endpoint_IsINReady()));
- Endpoint_Write_8(MSInterfaceInfo->Config.TotalLUNs - 1);
- Endpoint_ClearIN();
- Endpoint_ClearStatusStage();
- }
-
- break;
- }
-}
-
-bool MS_Device_ConfigureEndpoints(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- memset(&MSInterfaceInfo->State, 0x00, sizeof(MSInterfaceInfo->State));
-
- MSInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK;
- MSInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK;
-
- if (!(Endpoint_ConfigureEndpointTable(&MSInterfaceInfo->Config.DataINEndpoint, 1)))
- return false;
-
- if (!(Endpoint_ConfigureEndpointTable(&MSInterfaceInfo->Config.DataOUTEndpoint, 1)))
- return false;
-
- return true;
-}
-
-void MS_Device_USBTask(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return;
-
- Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address);
-
- if (Endpoint_IsOUTReceived())
- {
- if (MS_Device_ReadInCommandBlock(MSInterfaceInfo))
- {
- if (MSInterfaceInfo->State.CommandBlock.Flags & MS_COMMAND_DIR_DATA_IN)
- Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address);
-
- bool SCSICommandResult = CALLBACK_MS_Device_SCSICommandReceived(MSInterfaceInfo);
-
- MSInterfaceInfo->State.CommandStatus.Status = (SCSICommandResult) ? MS_SCSI_COMMAND_Pass : MS_SCSI_COMMAND_Fail;
- MSInterfaceInfo->State.CommandStatus.Signature = CPU_TO_LE32(MS_CSW_SIGNATURE);
- MSInterfaceInfo->State.CommandStatus.Tag = MSInterfaceInfo->State.CommandBlock.Tag;
- MSInterfaceInfo->State.CommandStatus.DataTransferResidue = MSInterfaceInfo->State.CommandBlock.DataTransferLength;
-
- if (!(SCSICommandResult) && (le32_to_cpu(MSInterfaceInfo->State.CommandStatus.DataTransferResidue)))
- Endpoint_StallTransaction();
-
- MS_Device_ReturnCommandStatus(MSInterfaceInfo);
- }
- }
-
- if (MSInterfaceInfo->State.IsMassStoreReset)
- {
- Endpoint_ResetEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address);
- Endpoint_ResetEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address);
-
- Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address);
- Endpoint_ClearStall();
- Endpoint_ResetDataToggle();
- Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address);
- Endpoint_ClearStall();
- Endpoint_ResetDataToggle();
-
- MSInterfaceInfo->State.IsMassStoreReset = false;
- }
-}
-
-static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- uint16_t BytesProcessed;
-
- Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address);
-
- BytesProcessed = 0;
- while (Endpoint_Read_Stream_LE(&MSInterfaceInfo->State.CommandBlock,
- (sizeof(MS_CommandBlockWrapper_t) - 16), &BytesProcessed) ==
- ENDPOINT_RWSTREAM_IncompleteTransfer)
- {
- if (MSInterfaceInfo->State.IsMassStoreReset)
- return false;
- }
-
- if ((MSInterfaceInfo->State.CommandBlock.Signature != CPU_TO_LE32(MS_CBW_SIGNATURE)) ||
- (MSInterfaceInfo->State.CommandBlock.LUN >= MSInterfaceInfo->Config.TotalLUNs) ||
- (MSInterfaceInfo->State.CommandBlock.Flags & 0x1F) ||
- (MSInterfaceInfo->State.CommandBlock.SCSICommandLength == 0) ||
- (MSInterfaceInfo->State.CommandBlock.SCSICommandLength > 16))
- {
- Endpoint_StallTransaction();
- Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address);
- Endpoint_StallTransaction();
-
- return false;
- }
-
- BytesProcessed = 0;
- while (Endpoint_Read_Stream_LE(&MSInterfaceInfo->State.CommandBlock.SCSICommandData,
- MSInterfaceInfo->State.CommandBlock.SCSICommandLength, &BytesProcessed) ==
- ENDPOINT_RWSTREAM_IncompleteTransfer)
- {
- if (MSInterfaceInfo->State.IsMassStoreReset)
- return false;
- }
-
- Endpoint_ClearOUT();
-
- return true;
-}
-
-static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
-{
- Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataOUTEndpoint.Address);
-
- while (Endpoint_IsStalled())
- {
- #if !defined(INTERRUPT_CONTROL_ENDPOINT)
- USB_USBTask();
- #endif
-
- if (MSInterfaceInfo->State.IsMassStoreReset)
- return;
- }
-
- Endpoint_SelectEndpoint(MSInterfaceInfo->Config.DataINEndpoint.Address);
-
- while (Endpoint_IsStalled())
- {
- #if !defined(INTERRUPT_CONTROL_ENDPOINT)
- USB_USBTask();
- #endif
-
- if (MSInterfaceInfo->State.IsMassStoreReset)
- return;
- }
-
- uint16_t BytesProcessed = 0;
- while (Endpoint_Write_Stream_LE(&MSInterfaceInfo->State.CommandStatus,
- sizeof(MS_CommandStatusWrapper_t), &BytesProcessed) ==
- ENDPOINT_RWSTREAM_IncompleteTransfer)
- {
- if (MSInterfaceInfo->State.IsMassStoreReset)
- return;
- }
-
- Endpoint_ClearIN();
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h deleted file mode 100644 index b9bc832e1..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.h +++ /dev/null @@ -1,161 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Device mode driver for the library USB Mass Storage Class driver.
- *
- * Device mode driver for the library USB Mass Storage Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassMS
- * \defgroup Group_USBClassMSDevice Mass Storage Class Device Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Device Mode USB Class driver framework interface, for the Mass Storage USB Class driver.
- *
- * @{
- */
-
-#ifndef _MS_CLASS_DEVICE_H_
-#define _MS_CLASS_DEVICE_H_
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/MassStorageClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_MS_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** \brief Mass Storage Class Device Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made for each Mass Storage interface
- * within the user application, and passed to each of the Mass Storage class driver functions as the
- * \c MSInterfaceInfo parameter. This stores each Mass Storage interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- uint8_t InterfaceNumber; /**< Interface number of the Mass Storage interface within the device. */
-
- USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */
- USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */
-
- uint8_t TotalLUNs; /**< Total number of logical drives in the Mass Storage interface. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- MS_CommandBlockWrapper_t CommandBlock; /**< Mass Storage class command block structure, stores the received SCSI
- * command from the host which is to be processed.
- */
- MS_CommandStatusWrapper_t CommandStatus; /**< Mass Storage class command status structure, set elements to indicate
- * the issued command's success or failure to the host.
- */
- volatile bool IsMassStoreReset; /**< Flag indicating that the host has requested that the Mass Storage interface be reset
- * and that all current Mass Storage operations should immediately abort.
- */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * are reset to their defaults when the interface is enumerated.
- */
- } USB_ClassInfo_MS_Device_t;
-
- /* Function Prototypes: */
- /** Configures the endpoints of a given Mass Storage interface, ready for use. This should be linked to the library
- * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration
- * containing the given Mass Storage interface is selected.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
- *
- * \return Boolean \c true if the endpoints were successfully configured, \c false otherwise.
- */
- bool MS_Device_ConfigureEndpoints(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Processes incoming control requests from the host, that are directed to the given Mass Storage class interface. This should be
- * linked to the library \ref EVENT_USB_Device_ControlRequest() event.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
- */
- void MS_Device_ProcessControlRequest(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** General management task for a given Mass Storage class interface, required for the correct operation of the interface. This should
- * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage configuration and state.
- */
- void MS_Device_USBTask(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Mass Storage class driver callback for the user processing of a received SCSI command. This callback will fire each time the
- * host sends a SCSI command which requires processing by the user application. Inside this callback the user is responsible
- * for the processing of the received SCSI command from the host. The SCSI command is available in the CommandBlock structure
- * inside the Mass Storage class state structure passed as a parameter to the callback function.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a Mass Storage Class configuration and state.
- *
- * \return Boolean \c true if the SCSI command was successfully processed, \c false otherwise.
- */
- bool CALLBACK_MS_Device_SCSICommandReceived(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_MASSSTORAGE_DEVICE_C)
- static void MS_Device_ReturnCommandStatus(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
- static bool MS_Device_ReadInCommandBlock(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
- #endif
-
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c deleted file mode 100644 index 80aa723c1..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c +++ /dev/null @@ -1,502 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#define __INCLUDE_FROM_RNDIS_DRIVER
-#define __INCLUDE_FROM_RNDIS_DEVICE_C
-#include "RNDISClassDevice.h"
-
-static const uint32_t PROGMEM AdapterSupportedOIDList[] =
- {
- CPU_TO_LE32(OID_GEN_SUPPORTED_LIST),
- CPU_TO_LE32(OID_GEN_PHYSICAL_MEDIUM),
- CPU_TO_LE32(OID_GEN_HARDWARE_STATUS),
- CPU_TO_LE32(OID_GEN_MEDIA_SUPPORTED),
- CPU_TO_LE32(OID_GEN_MEDIA_IN_USE),
- CPU_TO_LE32(OID_GEN_MAXIMUM_FRAME_SIZE),
- CPU_TO_LE32(OID_GEN_MAXIMUM_TOTAL_SIZE),
- CPU_TO_LE32(OID_GEN_LINK_SPEED),
- CPU_TO_LE32(OID_GEN_TRANSMIT_BLOCK_SIZE),
- CPU_TO_LE32(OID_GEN_RECEIVE_BLOCK_SIZE),
- CPU_TO_LE32(OID_GEN_VENDOR_ID),
- CPU_TO_LE32(OID_GEN_VENDOR_DESCRIPTION),
- CPU_TO_LE32(OID_GEN_CURRENT_PACKET_FILTER),
- CPU_TO_LE32(OID_GEN_MAXIMUM_TOTAL_SIZE),
- CPU_TO_LE32(OID_GEN_MEDIA_CONNECT_STATUS),
- CPU_TO_LE32(OID_GEN_XMIT_OK),
- CPU_TO_LE32(OID_GEN_RCV_OK),
- CPU_TO_LE32(OID_GEN_XMIT_ERROR),
- CPU_TO_LE32(OID_GEN_RCV_ERROR),
- CPU_TO_LE32(OID_GEN_RCV_NO_BUFFER),
- CPU_TO_LE32(OID_802_3_PERMANENT_ADDRESS),
- CPU_TO_LE32(OID_802_3_CURRENT_ADDRESS),
- CPU_TO_LE32(OID_802_3_MULTICAST_LIST),
- CPU_TO_LE32(OID_802_3_MAXIMUM_LIST_SIZE),
- CPU_TO_LE32(OID_802_3_RCV_ERROR_ALIGNMENT),
- CPU_TO_LE32(OID_802_3_XMIT_ONE_COLLISION),
- CPU_TO_LE32(OID_802_3_XMIT_MORE_COLLISIONS),
- };
-
-void RNDIS_Device_ProcessControlRequest(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo)
-{
- if (!(Endpoint_IsSETUPReceived()))
- return;
-
- if (USB_ControlRequest.wIndex != RNDISInterfaceInfo->Config.ControlInterfaceNumber)
- return;
-
- switch (USB_ControlRequest.bRequest)
- {
- case RNDIS_REQ_SendEncapsulatedCommand:
- if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- Endpoint_ClearSETUP();
- Endpoint_Read_Control_Stream_LE(RNDISInterfaceInfo->State.RNDISMessageBuffer, USB_ControlRequest.wLength);
- Endpoint_ClearIN();
-
- RNDIS_Device_ProcessRNDISControlMessage(RNDISInterfaceInfo);
- }
-
- break;
- case RNDIS_REQ_GetEncapsulatedResponse:
- if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
- {
- RNDIS_Message_Header_t* MessageHeader = (RNDIS_Message_Header_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
-
- if (!(MessageHeader->MessageLength))
- {
- RNDISInterfaceInfo->State.RNDISMessageBuffer[0] = 0;
- MessageHeader->MessageLength = CPU_TO_LE32(1);
- }
-
- Endpoint_ClearSETUP();
- Endpoint_Write_Control_Stream_LE(RNDISInterfaceInfo->State.RNDISMessageBuffer, le32_to_cpu(MessageHeader->MessageLength));
- Endpoint_ClearOUT();
-
- MessageHeader->MessageLength = CPU_TO_LE32(0);
- }
-
- break;
- }
-}
-
-bool RNDIS_Device_ConfigureEndpoints(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo)
-{
- memset(&RNDISInterfaceInfo->State, 0x00, sizeof(RNDISInterfaceInfo->State));
-
- RNDISInterfaceInfo->Config.DataINEndpoint.Type = EP_TYPE_BULK;
- RNDISInterfaceInfo->Config.DataOUTEndpoint.Type = EP_TYPE_BULK;
- RNDISInterfaceInfo->Config.NotificationEndpoint.Type = EP_TYPE_INTERRUPT;
-
- if (!(Endpoint_ConfigureEndpointTable(&RNDISInterfaceInfo->Config.DataINEndpoint, 1)))
- return false;
-
- if (!(Endpoint_ConfigureEndpointTable(&RNDISInterfaceInfo->Config.DataOUTEndpoint, 1)))
- return false;
-
- if (!(Endpoint_ConfigureEndpointTable(&RNDISInterfaceInfo->Config.NotificationEndpoint, 1)))
- return false;
-
- return true;
-}
-
-void RNDIS_Device_USBTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo)
-{
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return;
-
- Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.NotificationEndpoint.Address);
-
- if (Endpoint_IsINReady() && RNDISInterfaceInfo->State.ResponseReady)
- {
- USB_Request_Header_t Notification = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = RNDIS_NOTIF_ResponseAvailable,
- .wValue = CPU_TO_LE16(0),
- .wIndex = CPU_TO_LE16(0),
- .wLength = CPU_TO_LE16(0),
- };
-
- Endpoint_Write_Stream_LE(&Notification, sizeof(USB_Request_Header_t), NULL);
-
- Endpoint_ClearIN();
-
- RNDISInterfaceInfo->State.ResponseReady = false;
- }
-}
-
-void RNDIS_Device_ProcessRNDISControlMessage(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo)
-{
- /* Note: Only a single buffer is used for both the received message and its response to save SRAM. Because of
- this, response bytes should be filled in order so that they do not clobber unread data in the buffer. */
-
- RNDIS_Message_Header_t* MessageHeader = (RNDIS_Message_Header_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
-
- switch (le32_to_cpu(MessageHeader->MessageType))
- {
- case REMOTE_NDIS_INITIALIZE_MSG:
- RNDISInterfaceInfo->State.ResponseReady = true;
-
- RNDIS_Initialize_Message_t* INITIALIZE_Message =
- (RNDIS_Initialize_Message_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
- RNDIS_Initialize_Complete_t* INITIALIZE_Response =
- (RNDIS_Initialize_Complete_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
-
- INITIALIZE_Response->MessageType = CPU_TO_LE32(REMOTE_NDIS_INITIALIZE_CMPLT);
- INITIALIZE_Response->MessageLength = CPU_TO_LE32(sizeof(RNDIS_Initialize_Complete_t));
- INITIALIZE_Response->RequestId = INITIALIZE_Message->RequestId;
- INITIALIZE_Response->Status = CPU_TO_LE32(REMOTE_NDIS_STATUS_SUCCESS);
-
- INITIALIZE_Response->MajorVersion = CPU_TO_LE32(REMOTE_NDIS_VERSION_MAJOR);
- INITIALIZE_Response->MinorVersion = CPU_TO_LE32(REMOTE_NDIS_VERSION_MINOR);
- INITIALIZE_Response->DeviceFlags = CPU_TO_LE32(REMOTE_NDIS_DF_CONNECTIONLESS);
- INITIALIZE_Response->Medium = CPU_TO_LE32(REMOTE_NDIS_MEDIUM_802_3);
- INITIALIZE_Response->MaxPacketsPerTransfer = CPU_TO_LE32(1);
- INITIALIZE_Response->MaxTransferSize = CPU_TO_LE32(sizeof(RNDIS_Packet_Message_t) + ETHERNET_FRAME_SIZE_MAX);
- INITIALIZE_Response->PacketAlignmentFactor = CPU_TO_LE32(0);
- INITIALIZE_Response->AFListOffset = CPU_TO_LE32(0);
- INITIALIZE_Response->AFListSize = CPU_TO_LE32(0);
-
- RNDISInterfaceInfo->State.CurrRNDISState = RNDIS_Initialized;
- break;
- case REMOTE_NDIS_HALT_MSG:
- RNDISInterfaceInfo->State.ResponseReady = false;
-
- MessageHeader->MessageLength = CPU_TO_LE32(0);
-
- RNDISInterfaceInfo->State.CurrRNDISState = RNDIS_Uninitialized;
- break;
- case REMOTE_NDIS_QUERY_MSG:
- RNDISInterfaceInfo->State.ResponseReady = true;
-
- RNDIS_Query_Message_t* QUERY_Message = (RNDIS_Query_Message_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
- RNDIS_Query_Complete_t* QUERY_Response = (RNDIS_Query_Complete_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
- uint32_t Query_Oid = CPU_TO_LE32(QUERY_Message->Oid);
-
- void* QueryData = &RNDISInterfaceInfo->State.RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) +
- le32_to_cpu(QUERY_Message->InformationBufferOffset)];
- void* ResponseData = &RNDISInterfaceInfo->State.RNDISMessageBuffer[sizeof(RNDIS_Query_Complete_t)];
- uint16_t ResponseSize;
-
- QUERY_Response->MessageType = CPU_TO_LE32(REMOTE_NDIS_QUERY_CMPLT);
-
- if (RNDIS_Device_ProcessNDISQuery(RNDISInterfaceInfo, Query_Oid, QueryData, le32_to_cpu(QUERY_Message->InformationBufferLength),
- ResponseData, &ResponseSize))
- {
- QUERY_Response->Status = CPU_TO_LE32(REMOTE_NDIS_STATUS_SUCCESS);
- QUERY_Response->MessageLength = cpu_to_le32(sizeof(RNDIS_Query_Complete_t) + ResponseSize);
-
- QUERY_Response->InformationBufferLength = CPU_TO_LE32(ResponseSize);
- QUERY_Response->InformationBufferOffset = CPU_TO_LE32(sizeof(RNDIS_Query_Complete_t) - sizeof(RNDIS_Message_Header_t));
- }
- else
- {
- QUERY_Response->Status = CPU_TO_LE32(REMOTE_NDIS_STATUS_NOT_SUPPORTED);
- QUERY_Response->MessageLength = CPU_TO_LE32(sizeof(RNDIS_Query_Complete_t));
-
- QUERY_Response->InformationBufferLength = CPU_TO_LE32(0);
- QUERY_Response->InformationBufferOffset = CPU_TO_LE32(0);
- }
-
- break;
- case REMOTE_NDIS_SET_MSG:
- RNDISInterfaceInfo->State.ResponseReady = true;
-
- RNDIS_Set_Message_t* SET_Message = (RNDIS_Set_Message_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
- RNDIS_Set_Complete_t* SET_Response = (RNDIS_Set_Complete_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
- uint32_t SET_Oid = le32_to_cpu(SET_Message->Oid);
-
- SET_Response->MessageType = CPU_TO_LE32(REMOTE_NDIS_SET_CMPLT);
- SET_Response->MessageLength = CPU_TO_LE32(sizeof(RNDIS_Set_Complete_t));
- SET_Response->RequestId = SET_Message->RequestId;
-
- void* SetData = &RNDISInterfaceInfo->State.RNDISMessageBuffer[sizeof(RNDIS_Message_Header_t) +
- le32_to_cpu(SET_Message->InformationBufferOffset)];
-
- SET_Response->Status = RNDIS_Device_ProcessNDISSet(RNDISInterfaceInfo, SET_Oid, SetData,
- le32_to_cpu(SET_Message->InformationBufferLength)) ?
- REMOTE_NDIS_STATUS_SUCCESS : REMOTE_NDIS_STATUS_NOT_SUPPORTED;
- break;
- case REMOTE_NDIS_RESET_MSG:
- RNDISInterfaceInfo->State.ResponseReady = true;
-
- RNDIS_Reset_Complete_t* RESET_Response = (RNDIS_Reset_Complete_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
-
- RESET_Response->MessageType = CPU_TO_LE32(REMOTE_NDIS_RESET_CMPLT);
- RESET_Response->MessageLength = CPU_TO_LE32(sizeof(RNDIS_Reset_Complete_t));
- RESET_Response->Status = CPU_TO_LE32(REMOTE_NDIS_STATUS_SUCCESS);
- RESET_Response->AddressingReset = CPU_TO_LE32(0);
-
- break;
- case REMOTE_NDIS_KEEPALIVE_MSG:
- RNDISInterfaceInfo->State.ResponseReady = true;
-
- RNDIS_KeepAlive_Message_t* KEEPALIVE_Message =
- (RNDIS_KeepAlive_Message_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
- RNDIS_KeepAlive_Complete_t* KEEPALIVE_Response =
- (RNDIS_KeepAlive_Complete_t*)&RNDISInterfaceInfo->State.RNDISMessageBuffer;
-
- KEEPALIVE_Response->MessageType = CPU_TO_LE32(REMOTE_NDIS_KEEPALIVE_CMPLT);
- KEEPALIVE_Response->MessageLength = CPU_TO_LE32(sizeof(RNDIS_KeepAlive_Complete_t));
- KEEPALIVE_Response->RequestId = KEEPALIVE_Message->RequestId;
- KEEPALIVE_Response->Status = CPU_TO_LE32(REMOTE_NDIS_STATUS_SUCCESS);
-
- break;
- }
-}
-
-static bool RNDIS_Device_ProcessNDISQuery(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
- const uint32_t OId,
- void* const QueryData,
- const uint16_t QuerySize,
- void* ResponseData,
- uint16_t* const ResponseSize)
-{
- (void)QueryData;
- (void)QuerySize;
-
- switch (OId)
- {
- case OID_GEN_SUPPORTED_LIST:
- *ResponseSize = sizeof(AdapterSupportedOIDList);
-
- memcpy_P(ResponseData, AdapterSupportedOIDList, sizeof(AdapterSupportedOIDList));
-
- return true;
- case OID_GEN_PHYSICAL_MEDIUM:
- *ResponseSize = sizeof(uint32_t);
-
- /* Indicate that the device is a true ethernet link */
- *((uint32_t*)ResponseData) = CPU_TO_LE32(0);
-
- return true;
- case OID_GEN_HARDWARE_STATUS:
- *ResponseSize = sizeof(uint32_t);
-
- *((uint32_t*)ResponseData) = CPU_TO_LE32(NDIS_HardwareStatus_Ready);
-
- return true;
- case OID_GEN_MEDIA_SUPPORTED:
- case OID_GEN_MEDIA_IN_USE:
- *ResponseSize = sizeof(uint32_t);
-
- *((uint32_t*)ResponseData) = CPU_TO_LE32(REMOTE_NDIS_MEDIUM_802_3);
-
- return true;
- case OID_GEN_VENDOR_ID:
- *ResponseSize = sizeof(uint32_t);
-
- /* Vendor ID 0x0xFFFFFF is reserved for vendors who have not purchased a NDIS VID */
- *((uint32_t*)ResponseData) = CPU_TO_LE32(0x00FFFFFF);
-
- return true;
- case OID_GEN_MAXIMUM_FRAME_SIZE:
- case OID_GEN_TRANSMIT_BLOCK_SIZE:
- case OID_GEN_RECEIVE_BLOCK_SIZE:
- *ResponseSize = sizeof(uint32_t);
-
- *((uint32_t*)ResponseData) = CPU_TO_LE32(ETHERNET_FRAME_SIZE_MAX);
-
- return true;
- case OID_GEN_VENDOR_DESCRIPTION:
- *ResponseSize = (strlen(RNDISInterfaceInfo->Config.AdapterVendorDescription) + 1);
-
- memcpy(ResponseData, RNDISInterfaceInfo->Config.AdapterVendorDescription, *ResponseSize);
-
- return true;
- case OID_GEN_MEDIA_CONNECT_STATUS:
- *ResponseSize = sizeof(uint32_t);
-
- *((uint32_t*)ResponseData) = CPU_TO_LE32(REMOTE_NDIS_MEDIA_STATE_CONNECTED);
-
- return true;
- case OID_GEN_LINK_SPEED:
- *ResponseSize = sizeof(uint32_t);
-
- /* Indicate 10Mb/s link speed */
- *((uint32_t*)ResponseData) = CPU_TO_LE32(100000);
-
- return true;
- case OID_802_3_PERMANENT_ADDRESS:
- case OID_802_3_CURRENT_ADDRESS:
- *ResponseSize = sizeof(MAC_Address_t);
-
- memcpy(ResponseData, &RNDISInterfaceInfo->Config.AdapterMACAddress, sizeof(MAC_Address_t));
-
- return true;
- case OID_802_3_MAXIMUM_LIST_SIZE:
- *ResponseSize = sizeof(uint32_t);
-
- /* Indicate only one multicast address supported */
- *((uint32_t*)ResponseData) = CPU_TO_LE32(1);
-
- return true;
- case OID_GEN_CURRENT_PACKET_FILTER:
- *ResponseSize = sizeof(uint32_t);
-
- *((uint32_t*)ResponseData) = cpu_to_le32(RNDISInterfaceInfo->State.CurrPacketFilter);
-
- return true;
- case OID_GEN_XMIT_OK:
- case OID_GEN_RCV_OK:
- case OID_GEN_XMIT_ERROR:
- case OID_GEN_RCV_ERROR:
- case OID_GEN_RCV_NO_BUFFER:
- case OID_802_3_RCV_ERROR_ALIGNMENT:
- case OID_802_3_XMIT_ONE_COLLISION:
- case OID_802_3_XMIT_MORE_COLLISIONS:
- *ResponseSize = sizeof(uint32_t);
-
- /* Unused statistic OIDs - always return 0 for each */
- *((uint32_t*)ResponseData) = CPU_TO_LE32(0);
-
- return true;
- case OID_GEN_MAXIMUM_TOTAL_SIZE:
- *ResponseSize = sizeof(uint32_t);
-
- /* Indicate maximum overall buffer (Ethernet frame and RNDIS header) the adapter can handle */
- *((uint32_t*)ResponseData) = CPU_TO_LE32(RNDIS_MESSAGE_BUFFER_SIZE + ETHERNET_FRAME_SIZE_MAX);
-
- return true;
- default:
- return false;
- }
-}
-
-static bool RNDIS_Device_ProcessNDISSet(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
- const uint32_t OId,
- const void* SetData,
- const uint16_t SetSize)
-{
- (void)SetSize;
-
- switch (OId)
- {
- case OID_GEN_CURRENT_PACKET_FILTER:
- RNDISInterfaceInfo->State.CurrPacketFilter = le32_to_cpu(*((uint32_t*)SetData));
- RNDISInterfaceInfo->State.CurrRNDISState = (RNDISInterfaceInfo->State.CurrPacketFilter) ? RNDIS_Data_Initialized : RNDIS_Initialized;
-
- return true;
- case OID_802_3_MULTICAST_LIST:
- /* Do nothing - throw away the value from the host as it is unused */
-
- return true;
- default:
- return false;
- }
-}
-
-bool RNDIS_Device_IsPacketReceived(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo)
-{
- if ((USB_DeviceState != DEVICE_STATE_Configured) ||
- (RNDISInterfaceInfo->State.CurrRNDISState != RNDIS_Data_Initialized))
- {
- return false;
- }
-
- Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataOUTEndpoint.Address);
- return Endpoint_IsOUTReceived();
-}
-
-uint8_t RNDIS_Device_ReadPacket(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
- void* Buffer,
- uint16_t* const PacketLength)
-{
- if ((USB_DeviceState != DEVICE_STATE_Configured) ||
- (RNDISInterfaceInfo->State.CurrRNDISState != RNDIS_Data_Initialized))
- {
- return ENDPOINT_RWSTREAM_DeviceDisconnected;
- }
-
- Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataOUTEndpoint.Address);
-
- *PacketLength = 0;
-
- if (!(Endpoint_IsOUTReceived()))
- return ENDPOINT_RWSTREAM_NoError;
-
- RNDIS_Packet_Message_t RNDISPacketHeader;
- Endpoint_Read_Stream_LE(&RNDISPacketHeader, sizeof(RNDIS_Packet_Message_t), NULL);
-
- if (le32_to_cpu(RNDISPacketHeader.DataLength) > ETHERNET_FRAME_SIZE_MAX)
- {
- Endpoint_StallTransaction();
-
- return RNDIS_ERROR_LOGICAL_CMD_FAILED;
- }
-
- *PacketLength = (uint16_t)le32_to_cpu(RNDISPacketHeader.DataLength);
-
- Endpoint_Read_Stream_LE(Buffer, *PacketLength, NULL);
- Endpoint_ClearOUT();
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-uint8_t RNDIS_Device_SendPacket(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
- void* Buffer,
- const uint16_t PacketLength)
-{
- uint8_t ErrorCode;
-
- if ((USB_DeviceState != DEVICE_STATE_Configured) ||
- (RNDISInterfaceInfo->State.CurrRNDISState != RNDIS_Data_Initialized))
- {
- return ENDPOINT_RWSTREAM_DeviceDisconnected;
- }
-
- Endpoint_SelectEndpoint(RNDISInterfaceInfo->Config.DataINEndpoint.Address);
-
- if ((ErrorCode = Endpoint_WaitUntilReady()) != ENDPOINT_READYWAIT_NoError)
- return ErrorCode;
-
- RNDIS_Packet_Message_t RNDISPacketHeader;
-
- memset(&RNDISPacketHeader, 0, sizeof(RNDIS_Packet_Message_t));
-
- RNDISPacketHeader.MessageType = CPU_TO_LE32(REMOTE_NDIS_PACKET_MSG);
- RNDISPacketHeader.MessageLength = cpu_to_le32(sizeof(RNDIS_Packet_Message_t) + PacketLength);
- RNDISPacketHeader.DataOffset = CPU_TO_LE32(sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t));
- RNDISPacketHeader.DataLength = cpu_to_le32(PacketLength);
-
- Endpoint_Write_Stream_LE(&RNDISPacketHeader, sizeof(RNDIS_Packet_Message_t), NULL);
- Endpoint_Write_Stream_LE(Buffer, PacketLength, NULL);
- Endpoint_ClearIN();
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h deleted file mode 100644 index 4d1a4cff8..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Device/RNDISClassDevice.h +++ /dev/null @@ -1,203 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Device mode driver for the library USB RNDIS Class driver.
- *
- * Device mode driver for the library USB RNDIS Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassRNDIS
- * \defgroup Group_USBClassRNDISDevice RNDIS Class Device Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Device Mode USB Class driver framework interface, for the RNDIS USB Class driver.
- *
- * @{
- */
-
-#ifndef _RNDIS_CLASS_DEVICE_H_
-#define _RNDIS_CLASS_DEVICE_H_
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/RNDISClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_RNDIS_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** \brief RNDIS Class Device Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made for each RNDIS interface
- * within the user application, and passed to each of the RNDIS class driver functions as the
- * \c RNDISInterfaceInfo parameter. This stores each RNDIS interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- uint8_t ControlInterfaceNumber; /**< Interface number of the RNDIS control interface within the device. */
-
- USB_Endpoint_Table_t DataINEndpoint; /**< Data IN endpoint configuration table. */
- USB_Endpoint_Table_t DataOUTEndpoint; /**< Data OUT endpoint configuration table. */
- USB_Endpoint_Table_t NotificationEndpoint; /**< Notification IN Endpoint configuration table. */
-
- char* AdapterVendorDescription; /**< String description of the adapter vendor. */
- MAC_Address_t AdapterMACAddress; /**< MAC address of the adapter. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- uint8_t RNDISMessageBuffer[RNDIS_MESSAGE_BUFFER_SIZE]; /**< Buffer to hold RNDIS messages to and from the host,
- * managed by the class driver.
- */
- bool ResponseReady; /**< Internal flag indicating if a RNDIS message is waiting to be returned to the host. */
- uint8_t CurrRNDISState; /**< Current RNDIS state of the adapter, a value from the \ref RNDIS_States_t enum. */
- uint32_t CurrPacketFilter; /**< Current packet filter mode, used internally by the class driver. */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * are reset to their defaults when the interface is enumerated.
- */
- } USB_ClassInfo_RNDIS_Device_t;
-
- /* Function Prototypes: */
- /** Configures the endpoints of a given RNDIS interface, ready for use. This should be linked to the library
- * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration
- * containing the given RNDIS interface is selected.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing a RNDIS Class configuration and state.
- *
- * \return Boolean \c true if the endpoints were successfully configured, \c false otherwise.
- */
- bool RNDIS_Device_ConfigureEndpoints(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Processes incoming control requests from the host, that are directed to the given RNDIS class interface. This should be
- * linked to the library \ref EVENT_USB_Device_ControlRequest() event.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing a RNDIS Class configuration and state.
- */
- void RNDIS_Device_ProcessControlRequest(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** General management task for a given RNDIS class interface, required for the correct operation of the interface. This should
- * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing a RNDIS Class configuration and state.
- */
- void RNDIS_Device_USBTask(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Determines if a packet is currently waiting for the device to read in and process.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class configuration and state.
- *
- * \return Boolean \c true if a packet is waiting to be read in by the host, \c false otherwise.
- */
- bool RNDIS_Device_IsPacketReceived(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo);
-
- /** Retrieves the next pending packet from the device, discarding the remainder of the RNDIS packet header to leave
- * only the packet contents for processing by the device in the nominated buffer.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class configuration and state.
- * \param[out] Buffer Pointer to a buffer where the packer data is to be written to.
- * \param[out] PacketLength Pointer to where the length in bytes of the read packet is to be stored.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t RNDIS_Device_ReadPacket(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
- void* Buffer,
- uint16_t* const PacketLength);
-
- /** Sends the given packet to the attached RNDIS device, after adding a RNDIS packet message header.
- *
- * \pre This function must only be called when the Device state machine is in the \ref DEVICE_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class configuration and state.
- * \param[in] Buffer Pointer to a buffer where the packer data is to be read from.
- * \param[in] PacketLength Length in bytes of the packet to send.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t RNDIS_Device_SendPacket(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
- void* Buffer,
- const uint16_t PacketLength);
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_RNDIS_DEVICE_C)
- static void RNDIS_Device_ProcessRNDISControlMessage(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1);
- static bool RNDIS_Device_ProcessNDISQuery(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
- const uint32_t OId,
- void* const QueryData,
- const uint16_t QuerySize,
- void* ResponseData,
- uint16_t* const ResponseSize) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(5) ATTR_NON_NULL_PTR_ARG(6);
- static bool RNDIS_Device_ProcessNDISSet(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo,
- const uint32_t OId,
- const void* SetData,
- const uint16_t SetSize) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(3);
- #endif
-
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/HIDClass.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/HIDClass.h deleted file mode 100644 index 288559c75..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/HIDClass.h +++ /dev/null @@ -1,81 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the library USB HID Class driver.
- *
- * Master include file for the library USB HID Class driver, for both host and device modes, where available.
- *
- * This file should be included in all user projects making use of this optional class driver, instead of
- * including any headers in the USB/ClassDriver/Device, USB/ClassDriver/Host or USB/ClassDriver/Common subdirectories.
- */
-
-/** \ingroup Group_USBClassDrivers
- * \defgroup Group_USBClassHID HID Class Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/HIDClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- * - LUFA/Drivers/USB/Class/Host/HIDClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- * - LUFA/Drivers/USB/Class/Host/HIDParser.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- *
- * \section Sec_ModDescription Module Description
- * HID Class Driver module. This module contains an internal implementation of the USB HID Class, for both Device
- * and Host USB modes. User applications can use this class driver instead of implementing the HID class manually
- * via the low-level LUFA APIs.
- *
- * This module is designed to simplify the user code by exposing only the required interface needed to interface with
- * Hosts or Devices using the USB HID Class.
- *
- * @{
- */
-
-#ifndef _HID_CLASS_H_
-#define _HID_CLASS_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_USB_DRIVER
- #define __INCLUDE_FROM_HID_DRIVER
-
- /* Includes: */
- #include "../Core/USBMode.h"
-
- #if defined(USB_CAN_BE_DEVICE)
- #include "Device/HIDClassDevice.h"
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- #include "Host/HIDClassHost.h"
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c deleted file mode 100644 index 67a1352b3..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c +++ /dev/null @@ -1,422 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_AOA_DRIVER
-#define __INCLUDE_FROM_ANDROIDACCESSORY_HOST_C
-#include "AndroidAccessoryClassHost.h"
-
-bool AOA_Host_ValidateAccessoryDevice(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const USB_Descriptor_Device_t* const DeviceDescriptor,
- bool* const NeedModeSwitch)
-{
- (void)AOAInterfaceInfo;
-
- if (DeviceDescriptor->Header.Type != DTYPE_Device)
- return false;
-
- *NeedModeSwitch = ((DeviceDescriptor->ProductID != ANDROID_ACCESSORY_PRODUCT_ID) &&
- (DeviceDescriptor->ProductID != ANDROID_ACCESSORY_ADB_PRODUCT_ID));
-
- return true;
-}
-
-uint8_t AOA_Host_ConfigurePipes(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData)
-{
- USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
- USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
- USB_Descriptor_Interface_t* AOAInterface = NULL;
-
- memset(&AOAInterfaceInfo->State, 0x00, sizeof(AOAInterfaceInfo->State));
-
- if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
- return AOA_ENUMERROR_InvalidConfigDescriptor;
-
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_AOA_Host_NextAndroidAccessoryInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return AOA_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- AOAInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
-
- while (!(DataINEndpoint) || !(DataOUTEndpoint))
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_AOA_Host_NextInterfaceBulkEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return AOA_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
-
- if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
- DataINEndpoint = EndpointData;
- else
- DataOUTEndpoint = EndpointData;
- }
-
- AOAInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
- AOAInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
- AOAInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
- AOAInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
- AOAInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
- AOAInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
- if (!(Pipe_ConfigurePipeTable(&AOAInterfaceInfo->Config.DataINPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&AOAInterfaceInfo->Config.DataOUTPipe, 1)))
- return false;
-
- AOAInterfaceInfo->State.IsActive = true;
- AOAInterfaceInfo->State.InterfaceNumber = AOAInterface->InterfaceNumber;
-
- return AOA_ENUMERROR_NoError;
-}
-
-static uint8_t DCOMP_AOA_Host_NextAndroidAccessoryInterface(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if ((Interface->Class == AOA_CSCP_AOADataClass) &&
- (Interface->SubClass == AOA_CSCP_AOADataSubclass) &&
- (Interface->Protocol == AOA_CSCP_AOADataProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_AOA_Host_NextInterfaceBulkEndpoint(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Endpoint)
- {
- USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
- uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK);
-
- if ((EndpointType == EP_TYPE_BULK) && (!(Pipe_IsEndpointBound(Endpoint->EndpointAddress))))
- return DESCRIPTOR_SEARCH_Found;
- }
- else if (Header->Type == DTYPE_Interface)
- {
- return DESCRIPTOR_SEARCH_Fail;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-void AOA_Host_USBTask(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive))
- return;
-
- #if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
- AOA_Host_Flush(AOAInterfaceInfo);
- #endif
-}
-
-uint8_t AOA_Host_StartAccessoryMode(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo)
-{
- uint8_t ErrorCode;
-
- uint16_t AccessoryProtocol;
- if ((ErrorCode = AOA_Host_GetAccessoryProtocol(&AccessoryProtocol)) != HOST_WAITERROR_Successful)
- return ErrorCode;
-
- if (AccessoryProtocol != CPU_TO_LE16(AOA_PROTOCOL_AccessoryV1))
- return AOA_ERROR_LOGICAL_CMD_FAILED;
-
- for (uint8_t PropertyIndex = 0; PropertyIndex < AOA_STRING_TOTAL_STRINGS; PropertyIndex++)
- {
- if ((ErrorCode = AOA_Host_SendPropertyString(AOAInterfaceInfo, PropertyIndex)) != HOST_WAITERROR_Successful)
- return ErrorCode;
- }
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE),
- .bRequest = AOA_REQ_StartAccessoryMode,
- .wValue = 0,
- .wIndex = 0,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
- return USB_Host_SendControlRequest(NULL);
-}
-
-static uint8_t AOA_Host_GetAccessoryProtocol(uint16_t* const Protocol)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_VENDOR | REQREC_DEVICE),
- .bRequest = AOA_REQ_GetAccessoryProtocol,
- .wValue = 0,
- .wIndex = 0,
- .wLength = sizeof(uint16_t),
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
- return USB_Host_SendControlRequest(Protocol);
-}
-
-static uint8_t AOA_Host_SendPropertyString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const uint8_t StringIndex)
-{
- const char* String = AOAInterfaceInfo->Config.PropertyStrings[StringIndex];
-
- if (String == NULL)
- String = "";
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_VENDOR | REQREC_DEVICE),
- .bRequest = AOA_REQ_SendString,
- .wValue = 0,
- .wIndex = StringIndex,
- .wLength = (strlen(String) + 1),
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
- return USB_Host_SendControlRequest((char*)String);
-}
-
-uint8_t AOA_Host_SendData(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const uint8_t* const Buffer,
- const uint16_t Length)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address);
-
- Pipe_Unfreeze();
- ErrorCode = Pipe_Write_Stream_LE(Buffer, Length, NULL);
- Pipe_Freeze();
-
- return ErrorCode;
-}
-
-uint8_t AOA_Host_SendString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const char* const String)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address);
-
- Pipe_Unfreeze();
- ErrorCode = Pipe_Write_Stream_LE(String, strlen(String), NULL);
- Pipe_Freeze();
-
- return ErrorCode;
-}
-
-uint8_t AOA_Host_SendByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const uint8_t Data)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearOUT();
-
- if ((ErrorCode = Pipe_WaitUntilReady()) != PIPE_READYWAIT_NoError)
- return ErrorCode;
- }
-
- Pipe_Write_8(Data);
- Pipe_Freeze();
-
- return PIPE_READYWAIT_NoError;
-}
-
-uint16_t AOA_Host_BytesReceived(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive))
- return 0;
-
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsINReceived())
- {
- if (!(Pipe_BytesInPipe()))
- {
- Pipe_ClearIN();
- Pipe_Freeze();
- return 0;
- }
- else
- {
- Pipe_Freeze();
- return Pipe_BytesInPipe();
- }
- }
- else
- {
- Pipe_Freeze();
-
- return 0;
- }
-}
-
-int16_t AOA_Host_ReceiveByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive))
- return -1;
-
- int16_t ReceivedByte = -1;
-
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsINReceived())
- {
- if (Pipe_BytesInPipe())
- ReceivedByte = Pipe_Read_8();
-
- if (!(Pipe_BytesInPipe()))
- Pipe_ClearIN();
- }
-
- Pipe_Freeze();
-
- return ReceivedByte;
-}
-
-uint8_t AOA_Host_Flush(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(AOAInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(AOAInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if (!(Pipe_BytesInPipe()))
- return PIPE_READYWAIT_NoError;
-
- bool BankFull = !(Pipe_IsReadWriteAllowed());
-
- Pipe_ClearOUT();
-
- if (BankFull)
- {
- if ((ErrorCode = Pipe_WaitUntilReady()) != PIPE_READYWAIT_NoError)
- return ErrorCode;
-
- Pipe_ClearOUT();
- }
-
- Pipe_Freeze();
-
- return PIPE_READYWAIT_NoError;
-}
-
-#if defined(FDEV_SETUP_STREAM)
-void AOA_Host_CreateStream(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- FILE* const Stream)
-{
- *Stream = (FILE)FDEV_SETUP_STREAM(AOA_Host_putchar, AOA_Host_getchar, _FDEV_SETUP_RW);
- fdev_set_udata(Stream, AOAInterfaceInfo);
-}
-
-void AOA_Host_CreateBlockingStream(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- FILE* const Stream)
-{
- *Stream = (FILE)FDEV_SETUP_STREAM(AOA_Host_putchar, AOA_Host_getchar_Blocking, _FDEV_SETUP_RW);
- fdev_set_udata(Stream, AOAInterfaceInfo);
-}
-
-static int AOA_Host_putchar(char c,
- FILE* Stream)
-{
- return AOA_Host_SendByte((USB_ClassInfo_AOA_Host_t*)fdev_get_udata(Stream), c) ? _FDEV_ERR : 0;
-}
-
-static int AOA_Host_getchar(FILE* Stream)
-{
- int16_t ReceivedByte = AOA_Host_ReceiveByte((USB_ClassInfo_AOA_Host_t*)fdev_get_udata(Stream));
-
- if (ReceivedByte < 0)
- return _FDEV_EOF;
-
- return ReceivedByte;
-}
-
-static int AOA_Host_getchar_Blocking(FILE* Stream)
-{
- int16_t ReceivedByte;
-
- while ((ReceivedByte = AOA_Host_ReceiveByte((USB_ClassInfo_AOA_Host_t*)fdev_get_udata(Stream))) < 0)
- {
- if (USB_HostState == HOST_STATE_Unattached)
- return _FDEV_EOF;
-
- AOA_Host_USBTask((USB_ClassInfo_AOA_Host_t*)fdev_get_udata(Stream));
- USB_USBTask();
- }
-
- return ReceivedByte;
-}
-#endif
-
-#endif
-
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h deleted file mode 100644 index f55cd340a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.h +++ /dev/null @@ -1,314 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Host mode driver for the library USB Android Open Accessory Class driver.
- *
- * Host mode driver for the library USB Android Open Accessory Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassAOA
- * \defgroup Group_USBClassAndroidAccessoryHost Android Open Accessory Class Host Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/AndroidAccessoryClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Host Mode USB Class driver framework interface, for the Android Open Accessory USB Class driver.
- *
- * @{
- */
-
-#ifndef __AOA_CLASS_HOST_H__
-#define __AOA_CLASS_HOST_H__
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/AndroidAccessoryClassCommon.h"
-
- #include <stdio.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_AOA_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Error code for some Android Open Accessory Host functions, indicating a logical (and not hardware) error. */
- #define AOA_ERROR_LOGICAL_CMD_FAILED 0x80
-
- /* Type Defines: */
- /** \brief Android Open Accessory Class Host Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the Android Open Accessory class driver functions as the \c AOAInterfaceInfo
- * parameter. This stores each Android Open Accessory interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
- USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
-
- char* PropertyStrings[AOA_STRING_TOTAL_STRINGS]; /**< Android Accessory property strings, sent to identify the accessory when the
- * Android device is switched into Open Accessory mode. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
- * after \ref AOA_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state.
- */
- uint8_t InterfaceNumber; /**< Interface index of the AOA interface within the attached device. */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * <b>may</b> be set to initial values, but may also be ignored to default to sane values when
- * the interface is enumerated.
- */
- } USB_ClassInfo_AOA_Host_t;
-
- /* Enums: */
- /** Enum for the possible error codes returned by the \ref AOA_Host_ConfigurePipes() function. */
- enum AOA_Host_EnumerationFailure_ErrorCodes_t
- {
- AOA_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
- AOA_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
- AOA_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible Android Open Accessory interface was not found in the device's Configuration Descriptor. */
- AOA_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
- };
-
- /* Function Prototypes: */
- /** General management task for a given Android Open Accessory host class interface, required for the correct operation of the interface.
- * This should be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing an Android Open Accessory Class host configuration and state.
- */
- void AOA_Host_USBTask(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Validates a device descriptor, to check if the device is a valid Android device, and if it is currently in Android Open Accessory mode.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing an AOA Class host configuration and state.
- * \param[in] DeviceDescriptor Pointer a buffer containing the attached device's Device Descriptor.
- * \param[out] NeedModeSwitch Pointer to a boolean where the mode switch requirement of the attached device is to be stored.
- *
- * \return Boolean \c true if the attached device is a valid Android device, \c false otherwise.
- */
- bool AOA_Host_ValidateAccessoryDevice(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const USB_Descriptor_Device_t* const DeviceDescriptor,
- bool* const NeedModeSwitch) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Host interface configuration routine, to configure a given Android Open Accessory host interface instance using the Configuration
- * Descriptor read from an attached USB device. This function automatically updates the given Android Open Accessory Host instance's
- * state values and configures the pipes required to communicate with the interface if it is found within the device. This should be
- * called once after the stack has enumerated the attached device, while the host state machine is in the Addressed state.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing an AOA Class host configuration and state.
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
- * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor.
- *
- * \return A value from the \ref AOA_Host_EnumerationFailure_ErrorCodes_t enum.
- */
- uint8_t AOA_Host_ConfigurePipes(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Starts Accessory Mode in the attached Android device. This function will validate the device's Android Open Accessory protocol
- * version, send the configured property strings, and request a switch to Android Open Accessory mode.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing an AOA Class host configuration and state.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum, or \ref AOA_ERROR_LOGICAL_CMD_FAILED if a logical error occurred..
- */
- uint8_t AOA_Host_StartAccessoryMode(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a given data buffer to the attached USB device, if connected. If a device is not connected when the function is
- * called, the data will be discarded. Bytes will be queued for transmission to the device until either the pipe bank
- * becomes full, or the \ref AOA_Host_Flush() function is called to flush the pending data to the device. This allows for
- * multiple bytes to be packed into a single pipe packet, increasing data throughput.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state.
- * \param[in] Buffer Pointer to a buffer containing the data to send to the device.
- * \param[in] Length Length of the data to send to the device.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t AOA_Host_SendData(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const uint8_t* const Buffer,
- const uint16_t Length);
-
- /** Sends a given null-terminated string to the attached USB device, if connected. If a device is not connected when the
- * function is called, the string is discarded. Bytes will be queued for transmission to the device until either the pipe
- * bank becomes full, or the \ref AOA_Host_Flush() function is called to flush the pending data to the device. This allows
- * for multiple bytes to be packed into a single pipe packet, increasing data throughput.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state.
- * \param[in] String Pointer to the null terminated string to send to the device.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t AOA_Host_SendString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const char* const String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the
- * byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the
- * \ref AOA_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
- * packed into a single pipe packet, increasing data throughput.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state.
- * \param[in] Data Byte of data to send to the device.
- *
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t AOA_Host_SendByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Determines the number of bytes received by the AOA interface from the device, waiting to be read. This indicates the number
- * of bytes in the IN pipe bank only, and thus the number of calls to \ref AOA_Host_ReceiveByte() which are guaranteed to succeed
- * immediately. If multiple bytes are to be received, they should be buffered by the user application, as the pipe bank will not be
- * released back to the USB controller until all bytes are read.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state.
- *
- * \return Total number of buffered bytes received from the device.
- */
- uint16_t AOA_Host_BytesReceived(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads a byte of data from the device. If no data is waiting to be read of if a USB device is not connected, the function
- * returns a negative value. The \ref AOA_Host_BytesReceived() function may be queried in advance to determine how many bytes
- * are currently buffered in the AOA interface's data receive pipe.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state.
- *
- * \return Next received byte from the device, or a negative value if no data received.
- */
- int16_t AOA_Host_ReceiveByte(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class host configuration and state.
- *
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t AOA_Host_Flush(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Creates a standard character stream for the given AOA Device instance so that it can be used with all the regular
- * functions in the standard \c <stdio.h> library that accept a \c FILE stream as a destination (e.g. \c fprintf). The created
- * stream is bidirectional and can be used for both input and output functions.
- *
- * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single
- * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may
- * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own
- * line buffering.
- *
- * \note The created stream can be given as \c stdout if desired to direct the standard output from all \c <stdio.h> functions
- * to the given AOA interface.
- * \n\n
- *
- * \note This function is not available on all microcontroller architectures.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class configuration and state.
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed.
- */
- void AOA_Host_CreateStream(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- FILE* const Stream);
-
- /** Identical to \ref AOA_Host_CreateStream(), except that reads are blocking until the calling stream function terminates
- * the transfer. While blocking, the USB and AOA service tasks are called repeatedly to maintain USB communications.
- *
- * \note This function is not available on all microcontroller architectures.
- *
- * \param[in,out] AOAInterfaceInfo Pointer to a structure containing a AOA Class configuration and state.
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed.
- */
- void AOA_Host_CreateBlockingStream(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- FILE* const Stream);
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_ANDROIDACCESSORY_HOST_C)
- #if defined(FDEV_SETUP_STREAM)
- static int AOA_Host_putchar(char c,
- FILE* Stream) ATTR_NON_NULL_PTR_ARG(2);
- static int AOA_Host_getchar(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1);
- static int AOA_Host_getchar_Blocking(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1);
- #endif
-
- static uint8_t AOA_Host_GetAccessoryProtocol(uint16_t* const Protocol) ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t AOA_Host_SendPropertyString(USB_ClassInfo_AOA_Host_t* const AOAInterfaceInfo,
- const uint8_t StringIndex) ATTR_NON_NULL_PTR_ARG(1);
-
- static uint8_t DCOMP_AOA_Host_NextAndroidAccessoryInterface(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_AOA_Host_NextInterfaceBulkEndpoint(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AudioClassHost.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AudioClassHost.c deleted file mode 100644 index 1e869e830..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AudioClassHost.c +++ /dev/null @@ -1,223 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_AUDIO_DRIVER
-#define __INCLUDE_FROM_AUDIO_HOST_C
-#include "AudioClassHost.h"
-
-uint8_t Audio_Host_ConfigurePipes(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData)
-{
- USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
- USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
- USB_Descriptor_Interface_t* AudioControlInterface = NULL;
- USB_Descriptor_Interface_t* AudioStreamingInterface = NULL;
-
- memset(&AudioInterfaceInfo->State, 0x00, sizeof(AudioInterfaceInfo->State));
-
- if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
- return AUDIO_ENUMERROR_InvalidConfigDescriptor;
-
- while ((AudioInterfaceInfo->Config.DataINPipe.Address && !(DataINEndpoint)) ||
- (AudioInterfaceInfo->Config.DataOUTPipe.Address && !(DataOUTEndpoint)))
- {
- if (!(AudioControlInterface) ||
- USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_Audio_Host_NextAudioInterfaceDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- if (!(AudioControlInterface) ||
- USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_Audio_Host_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_Audio_Host_NextAudioControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return AUDIO_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- AudioControlInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
-
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_Audio_Host_NextAudioStreamInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return AUDIO_ENUMERROR_NoCompatibleInterfaceFound;
- }
- }
-
- AudioStreamingInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
-
- DataINEndpoint = NULL;
- DataOUTEndpoint = NULL;
-
- continue;
- }
-
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
-
- if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
- DataINEndpoint = EndpointData;
- else
- DataOUTEndpoint = EndpointData;
- }
-
- AudioInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
- AudioInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
- AudioInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_ISOCHRONOUS;
- AudioInterfaceInfo->Config.DataINPipe.Banks = 2;
-
- AudioInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
- AudioInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
- AudioInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_ISOCHRONOUS;
- AudioInterfaceInfo->Config.DataOUTPipe.Banks = 2;
-
- if (!(Pipe_ConfigurePipeTable(&AudioInterfaceInfo->Config.DataINPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&AudioInterfaceInfo->Config.DataOUTPipe, 1)))
- return false;
-
- AudioInterfaceInfo->State.ControlInterfaceNumber = AudioControlInterface->InterfaceNumber;
- AudioInterfaceInfo->State.StreamingInterfaceNumber = AudioStreamingInterface->InterfaceNumber;
- AudioInterfaceInfo->State.EnabledStreamingAltIndex = AudioStreamingInterface->AlternateSetting;
- AudioInterfaceInfo->State.IsActive = true;
-
- return AUDIO_ENUMERROR_NoError;
-}
-
-static uint8_t DCOMP_Audio_Host_NextAudioControlInterface(void* CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if ((Interface->Class == AUDIO_CSCP_AudioClass) &&
- (Interface->SubClass == AUDIO_CSCP_ControlSubclass) &&
- (Interface->Protocol == AUDIO_CSCP_ControlProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_Audio_Host_NextAudioStreamInterface(void* CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if ((Interface->Class == AUDIO_CSCP_AudioClass) &&
- (Interface->SubClass == AUDIO_CSCP_AudioStreamingSubclass) &&
- (Interface->Protocol == AUDIO_CSCP_StreamingProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_Audio_Host_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Endpoint)
- {
- USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
- if ((Endpoint->Attributes & EP_TYPE_MASK) == EP_TYPE_ISOCHRONOUS)
- return DESCRIPTOR_SEARCH_Found;
- }
- else if (Header->Type == DTYPE_Interface)
- {
- return DESCRIPTOR_SEARCH_Fail;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-uint8_t Audio_Host_StartStopStreaming(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- const bool EnableStreaming)
-{
- if (!(AudioInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- return USB_Host_SetInterfaceAltSetting(AudioInterfaceInfo->State.StreamingInterfaceNumber,
- EnableStreaming ? AudioInterfaceInfo->State.EnabledStreamingAltIndex : 0);
-}
-
-uint8_t Audio_Host_GetSetEndpointProperty(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- const uint8_t DataPipeIndex,
- const uint8_t EndpointProperty,
- const uint8_t EndpointControl,
- const uint16_t DataLength,
- void* const Data)
-{
- if (!(AudioInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- uint8_t RequestType;
- uint8_t EndpointAddress;
-
- if (EndpointProperty & 0x80)
- RequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT);
- else
- RequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_ENDPOINT);
-
- Pipe_SelectPipe(DataPipeIndex);
- EndpointAddress = Pipe_GetBoundEndpointAddress();
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = RequestType,
- .bRequest = EndpointProperty,
- .wValue = ((uint16_t)EndpointControl << 8),
- .wIndex = EndpointAddress,
- .wLength = DataLength,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(Data);
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AudioClassHost.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AudioClassHost.h deleted file mode 100644 index 6cb78a621..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/AudioClassHost.h +++ /dev/null @@ -1,411 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Host mode driver for the library USB Audio 1.0 Class driver.
- *
- * Host mode driver for the library USB Audio 1.0 Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassAudio
- * \defgroup Group_USBClassAudioHost Audio 1.0 Class Host Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/AudioClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Host Mode USB Class driver framework interface, for the Audio 1.0 USB Class driver.
- *
- * @{
- */
-
-#ifndef __AUDIO_CLASS_HOST_H__
-#define __AUDIO_CLASS_HOST_H__
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/AudioClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_AUDIO_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** \brief Audio Class Host Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the Audio class driver functions as the \c AudioInterfaceInfo parameter. This
- * stores each Audio interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
- USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
- * after \ref Audio_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state.
- */
- uint8_t ControlInterfaceNumber; /**< Interface index of the Audio Control interface within the attached device. */
- uint8_t StreamingInterfaceNumber; /**< Interface index of the Audio Streaming interface within the attached device. */
-
- uint8_t EnabledStreamingAltIndex; /**< Alternative setting index of the Audio Streaming interface when the stream is enabled. */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * <b>may</b> be set to initial values, but may also be ignored to default to sane values when
- * the interface is enumerated.
- */
- } USB_ClassInfo_Audio_Host_t;
-
- /* Enums: */
- /** Enum for the possible error codes returned by the \ref Audio_Host_ConfigurePipes() function. */
- enum AUDIO_Host_EnumerationFailure_ErrorCodes_t
- {
- AUDIO_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
- AUDIO_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
- AUDIO_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible AUDIO interface was not found in the device's Configuration Descriptor. */
- AUDIO_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
- };
-
- /* Function Prototypes: */
- /** Host interface configuration routine, to configure a given Audio host interface instance using the Configuration
- * Descriptor read from an attached USB device. This function automatically updates the given Audio Host instance's
- * state values and configures the pipes required to communicate with the interface if it is found within the
- * device. This should be called once after the stack has enumerated the attached device, while the host state
- * machine is in the Addressed state.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class host configuration and state.
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
- * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor.
- *
- * \return A value from the \ref AUDIO_Host_EnumerationFailure_ErrorCodes_t enum.
- */
- uint8_t Audio_Host_ConfigurePipes(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Starts or stops the audio streaming for the given configured Audio Host interface, allowing for audio samples to be
- * send and/or received.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class host configuration and state.
- * \param[in] EnableStreaming Boolean true to enable streaming of the specified interface, false to disable
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t Audio_Host_StartStopStreaming(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- const bool EnableStreaming) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Gets or sets the specified property of a streaming audio class endpoint that is bound to a pipe in the given
- * class instance.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class host configuration and state.
- * \param[in] DataPipeIndex Index of the data pipe whose bound endpoint is to be altered.
- * \param[in] EndpointProperty Property of the endpoint to get or set, a value from \ref Audio_ClassRequests_t.
- * \param[in] EndpointControl Parameter of the endpoint to get or set, a value from \ref Audio_EndpointControls_t.
- * \param[in,out] DataLength For SET operations, the length of the parameter data to set. For GET operations, the maximum
- * length of the retrieved data.
- * \param[in,out] Data Pointer to a location where the parameter data is stored for SET operations, or where
- * the retrieved data is to be stored for GET operations.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t Audio_Host_GetSetEndpointProperty(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- const uint8_t DataPipeIndex,
- const uint8_t EndpointProperty,
- const uint8_t EndpointControl,
- const uint16_t DataLength,
- void* const Data) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(6);
-
- /* Inline Functions: */
- /** General management task for a given Audio host class interface, required for the correct operation of
- * the interface. This should be called frequently in the main program loop, before the master USB management task
- * \ref USB_USBTask().
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class host configuration and state.
- */
- static inline void Audio_Host_USBTask(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void Audio_Host_USBTask(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- {
- (void)AudioInterfaceInfo;
- }
-
- /** Determines if the given audio interface is ready for a sample to be read from it, and selects the streaming
- * IN pipe ready for reading.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Boolean \c true if the given Audio interface has a sample to be read, \c false otherwise.
- */
- static inline bool Audio_Host_IsSampleReceived(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline bool Audio_Host_IsSampleReceived(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- {
- if ((USB_HostState != HOST_STATE_Configured) || !(AudioInterfaceInfo->State.IsActive))
- return false;
-
- bool SampleReceived = false;
-
- Pipe_SelectPipe(AudioInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
- SampleReceived = Pipe_IsINReceived();
- Pipe_Freeze();
-
- return SampleReceived;
- }
-
- /** Determines if the given audio interface is ready to accept the next sample to be written to it, and selects
- * the streaming OUT pipe ready for writing.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or
- * the call will fail.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Boolean \c true if the given Audio interface is ready to accept the next sample, \c false otherwise.
- */
- static inline bool Audio_Host_IsReadyForNextSample(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline bool Audio_Host_IsReadyForNextSample(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- {
- if ((USB_HostState != HOST_STATE_Configured) || !(AudioInterfaceInfo->State.IsActive))
- return false;
-
- Pipe_SelectPipe(AudioInterfaceInfo->Config.DataOUTPipe.Address);
- return Pipe_IsOUTReady();
- }
-
- /** Reads the next 8-bit audio sample from the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Host_IsSampleReceived() function to ensure
- * that the correct pipe is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Signed 8-bit audio sample from the audio interface.
- */
- static inline int8_t Audio_Host_ReadSample8(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline int8_t Audio_Host_ReadSample8(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- {
- int8_t Sample;
-
- (void)AudioInterfaceInfo;
-
- Sample = Pipe_Read_8();
-
- if (!(Pipe_BytesInPipe()))
- {
- Pipe_Unfreeze();
- Pipe_ClearIN();
- Pipe_Freeze();
- }
-
- return Sample;
- }
-
- /** Reads the next 16-bit audio sample from the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Host_IsSampleReceived() function to ensure
- * that the correct pipe is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Signed 16-bit audio sample from the audio interface.
- */
- static inline int16_t Audio_Host_ReadSample16(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline int16_t Audio_Host_ReadSample16(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- {
- int16_t Sample;
-
- (void)AudioInterfaceInfo;
-
- Sample = (int16_t)Pipe_Read_16_LE();
-
- if (!(Pipe_BytesInPipe()))
- {
- Pipe_Unfreeze();
- Pipe_ClearIN();
- Pipe_Freeze();
- }
-
- return Sample;
- }
-
- /** Reads the next 24-bit audio sample from the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Host_IsSampleReceived() function to ensure
- * that the correct pipe is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- *
- * \return Signed 24-bit audio sample from the audio interface.
- */
- static inline int32_t Audio_Host_ReadSample24(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline int32_t Audio_Host_ReadSample24(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo)
- {
- int32_t Sample;
-
- (void)AudioInterfaceInfo;
-
- Sample = (((uint32_t)Pipe_Read_8() << 16) | Pipe_Read_16_LE());
-
- if (!(Pipe_BytesInPipe()))
- {
- Pipe_Unfreeze();
- Pipe_ClearIN();
- Pipe_Freeze();
- }
-
- return Sample;
- }
-
- /** Writes the next 8-bit audio sample to the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Host_IsReadyForNextSample() function to
- * ensure that the correct pipe is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- * \param[in] Sample Signed 8-bit audio sample.
- */
- static inline void Audio_Host_WriteSample8(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- const int8_t Sample) ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void Audio_Host_WriteSample8(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- const int8_t Sample)
- {
- (void)AudioInterfaceInfo;
-
- Pipe_Write_8(Sample);
-
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_Unfreeze();
- Pipe_ClearOUT();
- Pipe_WaitUntilReady();
- Pipe_Freeze();
- }
- }
-
- /** Writes the next 16-bit audio sample to the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Host_IsReadyForNextSample() function to
- * ensure that the correct pipe is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- * \param[in] Sample Signed 16-bit audio sample.
- */
- static inline void Audio_Host_WriteSample16(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- const int16_t Sample) ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void Audio_Host_WriteSample16(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- const int16_t Sample)
- {
- (void)AudioInterfaceInfo;
-
- Pipe_Write_16_LE(Sample);
-
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_Unfreeze();
- Pipe_ClearOUT();
- Pipe_WaitUntilReady();
- Pipe_Freeze();
- }
- }
-
- /** Writes the next 24-bit audio sample to the current audio interface.
- *
- * \pre This should be preceded immediately by a call to the \ref Audio_Host_IsReadyForNextSample() function to
- * ensure that the correct pipe is selected and ready for data.
- *
- * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state.
- * \param[in] Sample Signed 24-bit audio sample.
- */
- static inline void Audio_Host_WriteSample24(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- const int32_t Sample) ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void Audio_Host_WriteSample24(USB_ClassInfo_Audio_Host_t* const AudioInterfaceInfo,
- const int32_t Sample)
- {
- (void)AudioInterfaceInfo;
-
- Pipe_Write_16_LE(Sample);
- Pipe_Write_8(Sample >> 16);
-
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_Unfreeze();
- Pipe_ClearOUT();
- Pipe_WaitUntilReady();
- Pipe_Freeze();
- }
- }
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_AUDIO_HOST_C)
- static uint8_t DCOMP_Audio_Host_NextAudioControlInterface(void* CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_Audio_Host_NextAudioStreamInterface(void* CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_Audio_Host_NextAudioInterfaceDataEndpoint(void* CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/CDCClassHost.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/CDCClassHost.c deleted file mode 100644 index dd48da1d8..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/CDCClassHost.c +++ /dev/null @@ -1,478 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_CDC_DRIVER
-#define __INCLUDE_FROM_CDC_HOST_C
-#include "CDCClassHost.h"
-
-uint8_t CDC_Host_ConfigurePipes(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData)
-{
- USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
- USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
- USB_Descriptor_Endpoint_t* NotificationEndpoint = NULL;
- USB_Descriptor_Interface_t* CDCControlInterface = NULL;
-
- memset(&CDCInterfaceInfo->State, 0x00, sizeof(CDCInterfaceInfo->State));
-
- if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
- return CDC_ENUMERROR_InvalidConfigDescriptor;
-
- while (!(DataINEndpoint) || !(DataOUTEndpoint) || !(NotificationEndpoint))
- {
- if (!(CDCControlInterface) ||
- USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_CDC_Host_NextCDCInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- if (NotificationEndpoint)
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_CDC_Host_NextCDCDataInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return CDC_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- DataINEndpoint = NULL;
- DataOUTEndpoint = NULL;
- }
- else
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_CDC_Host_NextCDCControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return CDC_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- CDCControlInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
-
- NotificationEndpoint = NULL;
- }
-
- continue;
- }
-
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
-
- if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
- {
- if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
- NotificationEndpoint = EndpointData;
- else
- DataINEndpoint = EndpointData;
- }
- else
- {
- DataOUTEndpoint = EndpointData;
- }
- }
-
- CDCInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
- CDCInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
- CDCInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
- CDCInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
- CDCInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
- CDCInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
- CDCInterfaceInfo->Config.NotificationPipe.Size = le16_to_cpu(NotificationEndpoint->EndpointSize);
- CDCInterfaceInfo->Config.NotificationPipe.EndpointAddress = NotificationEndpoint->EndpointAddress;
- CDCInterfaceInfo->Config.NotificationPipe.Type = EP_TYPE_INTERRUPT;
-
- if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.DataINPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.DataOUTPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&CDCInterfaceInfo->Config.NotificationPipe, 1)))
- return false;
-
- CDCInterfaceInfo->State.ControlInterfaceNumber = CDCControlInterface->InterfaceNumber;
- CDCInterfaceInfo->State.ControlLineStates.HostToDevice = (CDC_CONTROL_LINE_OUT_RTS | CDC_CONTROL_LINE_OUT_DTR);
- CDCInterfaceInfo->State.ControlLineStates.DeviceToHost = (CDC_CONTROL_LINE_IN_DCD | CDC_CONTROL_LINE_IN_DSR);
- CDCInterfaceInfo->State.IsActive = true;
-
- return CDC_ENUMERROR_NoError;
-}
-
-static uint8_t DCOMP_CDC_Host_NextCDCControlInterface(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if ((Interface->Class == CDC_CSCP_CDCClass) &&
- (Interface->SubClass == CDC_CSCP_ACMSubclass) &&
- (Interface->Protocol == CDC_CSCP_ATCommandProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_CDC_Host_NextCDCDataInterface(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if ((Interface->Class == CDC_CSCP_CDCDataClass) &&
- (Interface->SubClass == CDC_CSCP_NoDataSubclass) &&
- (Interface->Protocol == CDC_CSCP_NoDataProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_CDC_Host_NextCDCInterfaceEndpoint(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Endpoint)
- {
- USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
- uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK);
-
- if (((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT)) &&
- !(Pipe_IsEndpointBound(Endpoint->EndpointAddress)))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
- else if (Header->Type == DTYPE_Interface)
- {
- return DESCRIPTOR_SEARCH_Fail;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
- return;
-
- Pipe_SelectPipe(CDCInterfaceInfo->Config.NotificationPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsINReceived())
- {
- USB_Request_Header_t Notification;
- Pipe_Read_Stream_LE(&Notification, sizeof(USB_Request_Header_t), NULL);
-
- if ((Notification.bRequest == CDC_NOTIF_SerialState) &&
- (Notification.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)))
- {
- Pipe_Read_Stream_LE(&CDCInterfaceInfo->State.ControlLineStates.DeviceToHost,
- sizeof(CDCInterfaceInfo->State.ControlLineStates.DeviceToHost),
- NULL);
-
- Pipe_ClearIN();
-
- EVENT_CDC_Host_ControLineStateChanged(CDCInterfaceInfo);
- }
- else
- {
- Pipe_ClearIN();
- }
- }
-
- Pipe_Freeze();
-
- #if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
- CDC_Host_Flush(CDCInterfaceInfo);
- #endif
-}
-
-uint8_t CDC_Host_SetLineEncoding(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = CDC_REQ_SetLineEncoding,
- .wValue = 0,
- .wIndex = CDCInterfaceInfo->State.ControlInterfaceNumber,
- .wLength = sizeof(CDCInterfaceInfo->State.LineEncoding),
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(&CDCInterfaceInfo->State.LineEncoding);
-}
-
-uint8_t CDC_Host_SendControlLineStateChange(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = CDC_REQ_SetControlLineState,
- .wValue = CDCInterfaceInfo->State.ControlLineStates.HostToDevice,
- .wIndex = CDCInterfaceInfo->State.ControlInterfaceNumber,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(NULL);
-}
-
-uint8_t CDC_Host_SendBreak(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- const uint8_t Duration)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = CDC_REQ_SendBreak,
- .wValue = Duration,
- .wIndex = CDCInterfaceInfo->State.ControlInterfaceNumber,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(NULL);
-}
-
-uint8_t CDC_Host_SendData(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- const uint8_t* const Buffer,
- const uint16_t Length)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address);
-
- Pipe_Unfreeze();
- ErrorCode = Pipe_Write_Stream_LE(Buffer, Length, NULL);
- Pipe_Freeze();
-
- return ErrorCode;
-}
-
-uint8_t CDC_Host_SendString(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- const char* const String)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address);
-
- Pipe_Unfreeze();
- ErrorCode = Pipe_Write_Stream_LE(String, strlen(String), NULL);
- Pipe_Freeze();
-
- return ErrorCode;
-}
-
-uint8_t CDC_Host_SendByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- const uint8_t Data)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearOUT();
-
- if ((ErrorCode = Pipe_WaitUntilReady()) != PIPE_READYWAIT_NoError)
- return ErrorCode;
- }
-
- Pipe_Write_8(Data);
- Pipe_Freeze();
-
- return PIPE_READYWAIT_NoError;
-}
-
-uint16_t CDC_Host_BytesReceived(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
- return 0;
-
- Pipe_SelectPipe(CDCInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsINReceived())
- {
- if (!(Pipe_BytesInPipe()))
- {
- Pipe_ClearIN();
- Pipe_Freeze();
- return 0;
- }
- else
- {
- Pipe_Freeze();
- return Pipe_BytesInPipe();
- }
- }
- else
- {
- Pipe_Freeze();
-
- return 0;
- }
-}
-
-int16_t CDC_Host_ReceiveByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
- return -1;
-
- int16_t ReceivedByte = -1;
-
- Pipe_SelectPipe(CDCInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsINReceived())
- {
- if (Pipe_BytesInPipe())
- ReceivedByte = Pipe_Read_8();
-
- if (!(Pipe_BytesInPipe()))
- Pipe_ClearIN();
- }
-
- Pipe_Freeze();
-
- return ReceivedByte;
-}
-
-uint8_t CDC_Host_Flush(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(CDCInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(CDCInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if (!(Pipe_BytesInPipe()))
- return PIPE_READYWAIT_NoError;
-
- bool BankFull = !(Pipe_IsReadWriteAllowed());
-
- Pipe_ClearOUT();
-
- if (BankFull)
- {
- if ((ErrorCode = Pipe_WaitUntilReady()) != PIPE_READYWAIT_NoError)
- return ErrorCode;
-
- Pipe_ClearOUT();
- }
-
- Pipe_Freeze();
-
- return PIPE_READYWAIT_NoError;
-}
-
-#if defined(FDEV_SETUP_STREAM)
-void CDC_Host_CreateStream(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- FILE* const Stream)
-{
- *Stream = (FILE)FDEV_SETUP_STREAM(CDC_Host_putchar, CDC_Host_getchar, _FDEV_SETUP_RW);
- fdev_set_udata(Stream, CDCInterfaceInfo);
-}
-
-void CDC_Host_CreateBlockingStream(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- FILE* const Stream)
-{
- *Stream = (FILE)FDEV_SETUP_STREAM(CDC_Host_putchar, CDC_Host_getchar_Blocking, _FDEV_SETUP_RW);
- fdev_set_udata(Stream, CDCInterfaceInfo);
-}
-
-static int CDC_Host_putchar(char c,
- FILE* Stream)
-{
- return CDC_Host_SendByte((USB_ClassInfo_CDC_Host_t*)fdev_get_udata(Stream), c) ? _FDEV_ERR : 0;
-}
-
-static int CDC_Host_getchar(FILE* Stream)
-{
- int16_t ReceivedByte = CDC_Host_ReceiveByte((USB_ClassInfo_CDC_Host_t*)fdev_get_udata(Stream));
-
- if (ReceivedByte < 0)
- return _FDEV_EOF;
-
- return ReceivedByte;
-}
-
-static int CDC_Host_getchar_Blocking(FILE* Stream)
-{
- int16_t ReceivedByte;
-
- while ((ReceivedByte = CDC_Host_ReceiveByte((USB_ClassInfo_CDC_Host_t*)fdev_get_udata(Stream))) < 0)
- {
- if (USB_HostState == HOST_STATE_Unattached)
- return _FDEV_EOF;
-
- CDC_Host_USBTask((USB_ClassInfo_CDC_Host_t*)fdev_get_udata(Stream));
- USB_USBTask();
- }
-
- return ReceivedByte;
-}
-#endif
-
-// cppcheck-suppress unusedFunction
-void CDC_Host_Event_Stub(void)
-{
-
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/CDCClassHost.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/CDCClassHost.h deleted file mode 100644 index f5faab935..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/CDCClassHost.h +++ /dev/null @@ -1,351 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Host mode driver for the library USB CDC Class driver.
- *
- * Host mode driver for the library USB CDC Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassCDC
- * \defgroup Group_USBClassCDCHost CDC Class Host Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/CDCClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Host Mode USB Class driver framework interface, for the CDC USB Class driver.
- *
- * @{
- */
-
-#ifndef __CDC_CLASS_HOST_H__
-#define __CDC_CLASS_HOST_H__
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/CDCClassCommon.h"
-
- #include <stdio.h>
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_CDC_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** \brief CDC Class Host Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the CDC class driver functions as the \c CDCInterfaceInfo parameter. This
- * stores each CDC interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
- USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
- USB_Pipe_Table_t NotificationPipe; /**< Notification IN Pipe configuration table. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
- * after \ref CDC_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state.
- */
- uint8_t ControlInterfaceNumber; /**< Interface index of the CDC-ACM control interface within the attached device. */
-
- struct
- {
- uint16_t HostToDevice; /**< Control line states from the host to device, as a set of \c CDC_CONTROL_LINE_OUT_*
- * masks - to notify the device of changes to these values, call the
- * \ref CDC_Host_SendControlLineStateChange() function.
- */
- uint16_t DeviceToHost; /**< Control line states from the device to host, as a set of \c CDC_CONTROL_LINE_IN_*
- * masks. This value is updated each time \ref CDC_Host_USBTask() is called.
- */
- } ControlLineStates; /**< Current states of the virtual serial port's control lines between the device and host. */
-
- CDC_LineEncoding_t LineEncoding; /**< Line encoding used in the virtual serial port, for the device's information.
- * This is generally only used if the virtual serial port data is to be
- * reconstructed on a physical UART. When set by the host application, the
- * \ref CDC_Host_SetLineEncoding() function must be called to push the changes
- * to the device.
- */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * <b>may</b> be set to initial values, but may also be ignored to default to sane values when
- * the interface is enumerated.
- */
- } USB_ClassInfo_CDC_Host_t;
-
- /* Enums: */
- /** Enum for the possible error codes returned by the \ref CDC_Host_ConfigurePipes() function. */
- enum CDC_Host_EnumerationFailure_ErrorCodes_t
- {
- CDC_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
- CDC_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
- CDC_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible CDC interface was not found in the device's Configuration Descriptor. */
- CDC_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
- };
-
- /* Function Prototypes: */
- /** General management task for a given CDC host class interface, required for the correct operation of the interface. This should
- * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state.
- */
- void CDC_Host_USBTask(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Host interface configuration routine, to configure a given CDC host interface instance using the Configuration
- * Descriptor read from an attached USB device. This function automatically updates the given CDC Host instance's
- * state values and configures the pipes required to communicate with the interface if it is found within the device.
- * This should be called once after the stack has enumerated the attached device, while the host state machine is in
- * the Addressed state.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing an CDC Class host configuration and state.
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
- * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor.
- *
- * \return A value from the \ref CDC_Host_EnumerationFailure_ErrorCodes_t enum.
- */
- uint8_t CDC_Host_ConfigurePipes(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Sets the line encoding for the attached device's virtual serial port. This should be called when the \c LineEncoding
- * values of the interface have been changed to push the new settings to the USB device.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t CDC_Host_SetLineEncoding(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a Serial Control Line State Change notification to the device. This should be called when the virtual serial
- * control lines (DTR, RTS, etc.) have changed states. Line states persist until they are cleared via a second
- * notification. This should be called each time the CDC class driver's \c ControlLineStates.HostToDevice value is updated
- * to push the new states to the USB device.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t CDC_Host_SendControlLineStateChange(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a Send Break request to the device. This is generally used to separate data or to indicate a special condition
- * to the receiving device.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
- * \param[in] Duration Duration of the break, in milliseconds.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t CDC_Host_SendBreak(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- const uint8_t Duration) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a given data buffer to the attached USB device, if connected. If a device is not connected when the function is
- * called, the data will be discarded. Bytes will be queued for transmission to the device until either the pipe bank
- * becomes full, or the \ref CDC_Host_Flush() function is called to flush the pending data to the device. This allows for
- * multiple bytes to be packed into a single pipe packet, increasing data throughput.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
- * \param[in] Buffer Pointer to a buffer containing the data to send to the device.
- * \param[in] Length Length of the data to send to the device.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t CDC_Host_SendData(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- const uint8_t* const Buffer,
- const uint16_t Length);
-
- /** Sends a given null-terminated string to the attached USB device, if connected. If a device is not connected when the
- * function is called, the string is discarded. Bytes will be queued for transmission to the device until either the pipe
- * bank becomes full, or the \ref CDC_Host_Flush() function is called to flush the pending data to the device. This allows
- * for multiple bytes to be packed into a single pipe packet, increasing data throughput.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
- * \param[in] String Pointer to the null terminated string to send to the device.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t CDC_Host_SendString(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- const char* const String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the
- * byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the
- * \ref CDC_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
- * packed into a single pipe packet, increasing data throughput.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
- * \param[in] Data Byte of data to send to the device.
- *
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t CDC_Host_SendByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Determines the number of bytes received by the CDC interface from the device, waiting to be read. This indicates the number
- * of bytes in the IN pipe bank only, and thus the number of calls to \ref CDC_Host_ReceiveByte() which are guaranteed to succeed
- * immediately. If multiple bytes are to be received, they should be buffered by the user application, as the pipe bank will not be
- * released back to the USB controller until all bytes are read.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
- *
- * \return Total number of buffered bytes received from the device.
- */
- uint16_t CDC_Host_BytesReceived(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads a byte of data from the device. If no data is waiting to be read of if a USB device is not connected, the function
- * returns a negative value. The \ref CDC_Host_BytesReceived() function may be queried in advance to determine how many bytes
- * are currently buffered in the CDC interface's data receive pipe.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
- *
- * \return Next received byte from the device, or a negative value if no data received.
- */
- int16_t CDC_Host_ReceiveByte(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
- *
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t CDC_Host_Flush(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- #if defined(FDEV_SETUP_STREAM) || defined(__DOXYGEN__)
- /** Creates a standard character stream for the given CDC Device instance so that it can be used with all the regular
- * functions in the standard \c <stdio.h> library that accept a \c FILE stream as a destination (e.g. \c fprintf). The created
- * stream is bidirectional and can be used for both input and output functions.
- *
- * Reading data from this stream is non-blocking, i.e. in most instances, complete strings cannot be read in by a single
- * fetch, as the endpoint will not be ready at some point in the transmission, aborting the transfer. However, this may
- * be used when the read data is processed byte-per-bye (via \c getc()) or when the user application will implement its own
- * line buffering.
- *
- * \note The created stream can be given as \c stdout if desired to direct the standard output from all \c <stdio.h> functions
- * to the given CDC interface.
- * \n\n
- *
- * \note This function is not available on all microcontroller architectures.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed.
- */
- void CDC_Host_CreateStream(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- FILE* const Stream);
-
- /** Identical to \ref CDC_Host_CreateStream(), except that reads are blocking until the calling stream function terminates
- * the transfer. While blocking, the USB and CDC service tasks are called repeatedly to maintain USB communications.
- *
- * \note This function is not available on all microcontroller architectures.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class configuration and state.
- * \param[in,out] Stream Pointer to a FILE structure where the created stream should be placed.
- */
- void CDC_Host_CreateBlockingStream(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo,
- FILE* const Stream);
- #endif
-
- /** CDC class driver event for a control line state change on a CDC host interface. This event fires each time the device notifies
- * the host of a control line state change (containing the virtual serial control line states, such as DCD) and may be hooked in the
- * user program by declaring a handler function with the same name and parameters listed here. The new control line states
- * are available in the \c ControlLineStates.DeviceToHost value inside the CDC host interface structure passed as a parameter, set as
- * a mask of \c CDC_CONTROL_LINE_IN_* masks.
- *
- * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state.
- */
- void EVENT_CDC_Host_ControLineStateChanged(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_CDC_HOST_C)
- #if defined(FDEV_SETUP_STREAM)
- static int CDC_Host_putchar(char c,
- FILE* Stream) ATTR_NON_NULL_PTR_ARG(2);
- static int CDC_Host_getchar(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1);
- static int CDC_Host_getchar_Blocking(FILE* Stream) ATTR_NON_NULL_PTR_ARG(1);
- #endif
-
- void CDC_Host_Event_Stub(void) ATTR_CONST;
-
- void EVENT_CDC_Host_ControLineStateChanged(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo)
- ATTR_WEAK ATTR_NON_NULL_PTR_ARG(1) ATTR_ALIAS(CDC_Host_Event_Stub);
-
- static uint8_t DCOMP_CDC_Host_NextCDCControlInterface(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_CDC_Host_NextCDCDataInterface(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_CDC_Host_NextCDCInterfaceEndpoint(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/HIDClassHost.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/HIDClassHost.c deleted file mode 100644 index ae2395bc7..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/HIDClassHost.c +++ /dev/null @@ -1,396 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_HID_DRIVER
-#define __INCLUDE_FROM_HID_HOST_C
-#include "HIDClassHost.h"
-
-uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData)
-{
- USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
- USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
- USB_Descriptor_Interface_t* HIDInterface = NULL;
- USB_HID_Descriptor_HID_t* HIDDescriptor = NULL;
-
- memset(&HIDInterfaceInfo->State, 0x00, sizeof(HIDInterfaceInfo->State));
-
- if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
- return HID_ENUMERROR_InvalidConfigDescriptor;
-
- while (!(DataINEndpoint) || !(DataOUTEndpoint))
- {
- if (!(HIDInterface) ||
- USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_HID_Host_NextHIDInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- if (DataINEndpoint || DataOUTEndpoint)
- break;
-
- do
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_HID_Host_NextHIDInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return HID_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- HIDInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
- } while (HIDInterfaceInfo->Config.HIDInterfaceProtocol &&
- (HIDInterface->Protocol != HIDInterfaceInfo->Config.HIDInterfaceProtocol));
-
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_HID_Host_NextHIDDescriptor) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return HID_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- HIDDescriptor = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_HID_Descriptor_HID_t);
-
- DataINEndpoint = NULL;
- DataOUTEndpoint = NULL;
-
- continue;
- }
-
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
-
- if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
- DataINEndpoint = EndpointData;
- else
- DataOUTEndpoint = EndpointData;
- }
-
- HIDInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
- HIDInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
- HIDInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_INTERRUPT;
-
- HIDInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
- HIDInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
- HIDInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_INTERRUPT;
-
- if (!(Pipe_ConfigurePipeTable(&HIDInterfaceInfo->Config.DataINPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&HIDInterfaceInfo->Config.DataOUTPipe, 1)))
- return false;
-
- HIDInterfaceInfo->State.InterfaceNumber = HIDInterface->InterfaceNumber;
- HIDInterfaceInfo->State.HIDReportSize = LE16_TO_CPU(HIDDescriptor->HIDReportLength);
- HIDInterfaceInfo->State.SupportsBootProtocol = (HIDInterface->SubClass != HID_CSCP_NonBootProtocol);
- HIDInterfaceInfo->State.LargestReportSize = 8;
- HIDInterfaceInfo->State.IsActive = true;
-
- return HID_ENUMERROR_NoError;
-}
-
-static uint8_t DCOMP_HID_Host_NextHIDInterface(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if (Interface->Class == HID_CSCP_HIDClass)
- return DESCRIPTOR_SEARCH_Found;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_HID_Host_NextHIDDescriptor(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == HID_DTYPE_HID)
- return DESCRIPTOR_SEARCH_Found;
- else if (Header->Type == DTYPE_Interface)
- return DESCRIPTOR_SEARCH_Fail;
- else
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_HID_Host_NextHIDInterfaceEndpoint(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Endpoint)
- {
- USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
- if (!(Pipe_IsEndpointBound(Endpoint->EndpointAddress)))
- return DESCRIPTOR_SEARCH_Found;
- }
- else if (Header->Type == DTYPE_Interface)
- {
- return DESCRIPTOR_SEARCH_Fail;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
-uint8_t HID_Host_ReceiveReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
- const uint8_t ReportID,
- void* Buffer)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = HID_REQ_SetReport,
- .wValue = ((HID_REPORT_ITEM_In + 1) << 8) | ReportID,
- .wIndex = HIDInterfaceInfo->State.InterfaceNumber,
- .wLength = USB_GetHIDReportSize(HIDInterfaceInfo->Config.HIDParserData, ReportID, HID_REPORT_ITEM_In),
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(Buffer);
-}
-#endif
-
-uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
- void* Buffer)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(HIDInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- uint16_t ReportSize;
- uint8_t* BufferPos = Buffer;
-
-#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
- if (!(HIDInterfaceInfo->State.UsingBootProtocol))
- {
- uint8_t ReportID = 0;
-
- if (HIDInterfaceInfo->Config.HIDParserData->UsingReportIDs)
- {
- ReportID = Pipe_Read_8();
- *(BufferPos++) = ReportID;
- }
-
- ReportSize = USB_GetHIDReportSize(HIDInterfaceInfo->Config.HIDParserData, ReportID, HID_REPORT_ITEM_In);
- }
- else
-#endif
- {
- ReportSize = Pipe_BytesInPipe();
- }
-
- if ((ErrorCode = Pipe_Read_Stream_LE(BufferPos, ReportSize, NULL)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
-#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
- const uint8_t ReportID,
-#endif
- const uint8_t ReportType,
- void* Buffer,
- const uint16_t ReportSize)
-{
-#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
- if ((USB_HostState != HOST_STATE_Configured) || !(HIDInterfaceInfo->State.IsActive))
- return false;
-
- if (HIDInterfaceInfo->State.DeviceUsesOUTPipe && (ReportType == HID_REPORT_ITEM_Out))
- {
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(HIDInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if (ReportID)
- Pipe_Write_Stream_LE(&ReportID, sizeof(ReportID), NULL);
-
- if ((ErrorCode = Pipe_Write_Stream_LE(Buffer, ReportSize, NULL)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- Pipe_ClearOUT();
- Pipe_Freeze();
-
- return PIPE_RWSTREAM_NoError;
- }
- else
-#endif
- {
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = HID_REQ_SetReport,
-#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
- .wValue = ((ReportType + 1) << 8) | ReportID,
-#else
- .wValue = ((ReportType + 1) << 8),
-#endif
- .wIndex = HIDInterfaceInfo->State.InterfaceNumber,
- .wLength = ReportSize,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(Buffer);
- }
-}
-
-bool HID_Host_IsReportReceived(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(HIDInterfaceInfo->State.IsActive))
- return false;
-
- bool ReportReceived;
-
- Pipe_SelectPipe(HIDInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- ReportReceived = Pipe_IsINReceived();
-
- Pipe_Freeze();
-
- return ReportReceived;
-}
-
-uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo)
-{
- uint8_t ErrorCode;
-
- if (!(HIDInterfaceInfo->State.SupportsBootProtocol))
- return HID_ERROR_LOGICAL;
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = HID_REQ_SetProtocol,
- .wValue = 0,
- .wIndex = HIDInterfaceInfo->State.InterfaceNumber,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
- return ErrorCode;
-
- HIDInterfaceInfo->State.LargestReportSize = 8;
- HIDInterfaceInfo->State.UsingBootProtocol = true;
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t HID_Host_SetIdlePeriod(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
- const uint16_t MS)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = HID_REQ_SetIdle,
- .wValue = ((MS << 6) & 0xFF00),
- .wIndex = HIDInterfaceInfo->State.InterfaceNumber,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(NULL);
-}
-
-#if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
-uint8_t HID_Host_SetReportProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo)
-{
- uint8_t ErrorCode;
-
- uint8_t HIDReportData[HIDInterfaceInfo->State.HIDReportSize];
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
- .bRequest = REQ_GetDescriptor,
- .wValue = (HID_DTYPE_Report << 8),
- .wIndex = HIDInterfaceInfo->State.InterfaceNumber,
- .wLength = HIDInterfaceInfo->State.HIDReportSize,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- if ((ErrorCode = USB_Host_SendControlRequest(HIDReportData)) != HOST_SENDCONTROL_Successful)
- return ErrorCode;
-
- if (HIDInterfaceInfo->State.UsingBootProtocol)
- {
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = HID_REQ_SetProtocol,
- .wValue = 1,
- .wIndex = HIDInterfaceInfo->State.InterfaceNumber,
- .wLength = 0,
- };
-
- if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
- return ErrorCode;
-
- HIDInterfaceInfo->State.UsingBootProtocol = false;
- }
-
- if (HIDInterfaceInfo->Config.HIDParserData == NULL)
- return HID_ERROR_LOGICAL;
-
- if ((ErrorCode = USB_ProcessHIDReport(HIDReportData, HIDInterfaceInfo->State.HIDReportSize,
- HIDInterfaceInfo->Config.HIDParserData)) != HID_PARSE_Successful)
- {
- return HID_ERROR_LOGICAL | ErrorCode;
- }
-
- uint16_t LargestReportSizeBits = HIDInterfaceInfo->Config.HIDParserData->LargestReportSizeBits;
- HIDInterfaceInfo->State.LargestReportSize = (LargestReportSizeBits >> 3) + ((LargestReportSizeBits & 0x07) != 0);
-
- return 0;
-}
-#endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/HIDClassHost.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/HIDClassHost.h deleted file mode 100644 index 5d617b92f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/HIDClassHost.h +++ /dev/null @@ -1,313 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Host mode driver for the library USB HID Class driver.
- *
- * Host mode driver for the library USB HID Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassHID
- * \defgroup Group_USBClassHIDHost HID Class Host Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/HIDClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Host Mode USB Class driver framework interface, for the HID USB Class driver.
- *
- * @{
- */
-
-#ifndef __HID_CLASS_HOST_H__
-#define __HID_CLASS_HOST_H__
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/HIDClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_HID_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Error code for some HID Host functions, indicating a logical (and not hardware) error. */
- #define HID_ERROR_LOGICAL 0x80
-
- /* Type Defines: */
- /** \brief HID Class Host Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the HID class driver functions as the \c HIDInterfaceInfo parameter. This
- * stores each HID interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
- USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
-
- uint8_t HIDInterfaceProtocol; /**< HID interface protocol value to match against if a specific
- * boot subclass protocol is required, a protocol value from the
- * \ref HID_Descriptor_ClassSubclassProtocol_t enum.
- */
- #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
- HID_ReportInfo_t* HIDParserData; /**< HID parser data to store the parsed HID report data, when boot protocol
- * is not used.
- *
- * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined,
- * this method is unavailable.
- */
- #endif
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
- * after \ref HID_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state.
- */
- uint8_t InterfaceNumber; /**< Interface index of the HID interface within the attached device. */
-
- bool SupportsBootProtocol; /**< Indicates if the current interface instance supports the HID Boot
- * Protocol when enabled via \ref HID_Host_SetBootProtocol().
- */
- bool DeviceUsesOUTPipe; /**< Indicates if the current interface instance uses a separate OUT data pipe for
- * OUT reports, or if OUT reports are sent via the control pipe instead.
- */
- bool UsingBootProtocol; /**< Indicates that the interface is currently initialized in Boot Protocol mode */
- uint16_t HIDReportSize; /**< Size in bytes of the HID report descriptor in the device. */
-
- uint8_t LargestReportSize; /**< Largest report the device will send, in bytes. */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * <b>may</b> be set to initial values, but may also be ignored to default to sane values when
- * the interface is enumerated.
- */
- } USB_ClassInfo_HID_Host_t;
-
- /* Enums: */
- /** Enum for the possible error codes returned by the \ref HID_Host_ConfigurePipes() function. */
- enum HID_Host_EnumerationFailure_ErrorCodes_t
- {
- HID_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
- HID_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
- HID_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible HID interface was not found in the device's Configuration Descriptor. */
- HID_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
- };
-
- /* Function Prototypes: */
- /** Host interface configuration routine, to configure a given HID host interface instance using the Configuration
- * Descriptor read from an attached USB device. This function automatically updates the given HID Host instance's
- * state values and configures the pipes required to communicate with the interface if it is found within the
- * device. This should be called once after the stack has enumerated the attached device, while the host state
- * machine is in the Addressed state.
- *
- * \attention Once the device pipes are configured, the HID device's reporting protocol <b>must</b> be set via a call
- * to either the \ref HID_Host_SetBootProtocol() or \ref HID_Host_SetReportProtocol() function.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
- * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor.
- *
- * \return A value from the \ref HID_Host_EnumerationFailure_ErrorCodes_t enum.
- */
- uint8_t HID_Host_ConfigurePipes(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
-
- /** Receives a HID IN report from the attached HID device, when a report has been received on the HID IN Data pipe.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \attention The destination buffer should be large enough to accommodate the largest report that the attached device
- * can generate.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
- * \param[in] Buffer Buffer to store the received report into.
- *
- * \return An error code from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t HID_Host_ReceiveReport(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
- void* Buffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
- /** Receives a HID IN report from the attached device, by the report ID.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
- * \param[in] ReportID Report ID of the received report if ControlRequest is false, set by the to the Report ID to fetch.
- * \param[in] Buffer Buffer to store the received report into.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t HID_Host_ReceiveReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
- const uint8_t ReportID,
- void* Buffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
- #endif
-
- /** Sends an OUT or FEATURE report to the currently attached HID device, using the device's OUT pipe if available,
- * or the device's Control pipe if not.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, the ReportID parameter is removed
- * from the parameter list of this function.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
- * \param[in] ReportID Report ID of the report to send to the device, or 0 if the device does not use report IDs.
- * \param[in] ReportType Type of report to issue to the device, either \ref HID_REPORT_ITEM_Out or \ref HID_REPORT_ITEM_Feature.
- * \param[in] Buffer Buffer containing the report to send to the attached device.
- * \param[in] ReportSize Report size in bytes to send to the attached device.
- *
- * \return An error code from the \ref USB_Host_SendControlErrorCodes_t enum if the DeviceUsesOUTPipe flag is set in
- * the interface's state structure, a value from the \ref Pipe_Stream_RW_ErrorCodes_t enum otherwise.
- */
- uint8_t HID_Host_SendReportByID(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
- #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
- const uint8_t ReportID,
- #endif
- const uint8_t ReportType,
- void* Buffer,
- const uint16_t ReportSize) ATTR_NON_NULL_PTR_ARG(1)
- #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
- ATTR_NON_NULL_PTR_ARG(4);
- #else
- ATTR_NON_NULL_PTR_ARG(3);
- #endif
-
- /** Determines if a HID IN report has been received from the attached device on the data IN pipe.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
- *
- * \return Boolean \c true if a report has been received, \c false otherwise.
- */
- bool HID_Host_IsReportReceived(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Switches the attached HID device's reporting protocol over to the Boot Report protocol mode, on supported devices.
- *
- * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method must still be called
- * to explicitly place the attached device into boot protocol mode before use.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
- *
- * \return \ref HID_ERROR_LOGICAL if the device does not support Boot Protocol mode, a value from the
- * \ref USB_Host_SendControlErrorCodes_t enum otherwise.
- */
- uint8_t HID_Host_SetBootProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sets the idle period for the attached HID device to the specified interval. The HID idle period determines the rate
- * at which the device should send a report, when no state changes have occurred; i.e. on HID keyboards, this sets the
- * hardware key repeat interval.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
- * \param[in] MS Idle period as a multiple of four milliseconds, zero to disable hardware repeats
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t HID_Host_SetIdlePeriod(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo,
- const uint16_t MS) ATTR_NON_NULL_PTR_ARG(1);
-
- #if !defined(HID_HOST_BOOT_PROTOCOL_ONLY)
- /** Switches the attached HID device's reporting protocol over to the standard Report protocol mode. This also retrieves
- * and parses the device's HID report descriptor, so that the size of each report can be determined in advance.
- *
- * \attention Whether this function is used or not, the \ref CALLBACK_HIDParser_FilterHIDReportItem() callback from the HID
- * Report Parser this function references <b>must</b> be implemented in the user code.
- *
- * \note When the \c HID_HOST_BOOT_PROTOCOL_ONLY compile time token is defined, this method is unavailable.
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum if an error occurs while retrieving the HID
- * Report descriptor or the setting of the Report protocol, \ref HID_ERROR_LOGICAL if the HID interface does
- * not have a valid \ref HID_ReportInfo_t structure set in its configuration, a mask of \ref HID_ERROR_LOGICAL
- * and a value from the \ref HID_Parse_ErrorCodes_t otherwise.
- */
- uint8_t HID_Host_SetReportProtocol(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
- #endif
-
- /* Inline Functions: */
- /** General management task for a given Human Interface Class host class interface, required for the correct operation of
- * the interface. This should be called frequently in the main program loop, before the master USB management task
- * \ref USB_USBTask().
- *
- * \param[in,out] HIDInterfaceInfo Pointer to a structure containing a HID Class host configuration and state.
- */
- static inline void HID_Host_USBTask(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
- static inline void HID_Host_USBTask(USB_ClassInfo_HID_Host_t* const HIDInterfaceInfo)
- {
- (void)HIDInterfaceInfo;
- }
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_HID_HOST_C)
- static uint8_t DCOMP_HID_Host_NextHIDInterface(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_HID_Host_NextHIDDescriptor(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_HID_Host_NextHIDInterfaceEndpoint(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c deleted file mode 100644 index 29a6696db..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MIDIClassHost.c +++ /dev/null @@ -1,231 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_MIDI_DRIVER
-#define __INCLUDE_FROM_MIDI_HOST_C
-#include "MIDIClassHost.h"
-
-uint8_t MIDI_Host_ConfigurePipes(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData)
-{
- USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
- USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
- USB_Descriptor_Interface_t* MIDIInterface = NULL;
-
- memset(&MIDIInterfaceInfo->State, 0x00, sizeof(MIDIInterfaceInfo->State));
-
- if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
- return MIDI_ENUMERROR_InvalidConfigDescriptor;
-
- while (!(DataINEndpoint) || !(DataOUTEndpoint))
- {
- if (!(MIDIInterface) ||
- USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_MIDI_Host_NextMIDIStreamingDataEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_MIDI_Host_NextMIDIStreamingInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return MIDI_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- MIDIInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
-
- DataINEndpoint = NULL;
- DataOUTEndpoint = NULL;
-
- continue;
- }
-
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
-
- if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
- DataINEndpoint = EndpointData;
- else
- DataOUTEndpoint = EndpointData;
- }
-
- MIDIInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
- MIDIInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
- MIDIInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
- MIDIInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
- MIDIInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
- MIDIInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
- if (!(Pipe_ConfigurePipeTable(&MIDIInterfaceInfo->Config.DataINPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&MIDIInterfaceInfo->Config.DataOUTPipe, 1)))
- return false;
-
- MIDIInterfaceInfo->State.InterfaceNumber = MIDIInterface->InterfaceNumber;
- MIDIInterfaceInfo->State.IsActive = true;
-
- return MIDI_ENUMERROR_NoError;
-}
-
-static uint8_t DCOMP_MIDI_Host_NextMIDIStreamingInterface(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if ((Interface->Class == AUDIO_CSCP_AudioClass) &&
- (Interface->SubClass == AUDIO_CSCP_MIDIStreamingSubclass) &&
- (Interface->Protocol == AUDIO_CSCP_StreamingProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_MIDI_Host_NextMIDIStreamingDataEndpoint(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Endpoint)
- {
- USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
- uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK);
-
- if ((EndpointType == EP_TYPE_BULK) && !(Pipe_IsEndpointBound(Endpoint->EndpointAddress)))
- return DESCRIPTOR_SEARCH_Found;
- }
- else if (Header->Type == DTYPE_Interface)
- {
- return DESCRIPTOR_SEARCH_Fail;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-void MIDI_Host_USBTask(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MIDIInterfaceInfo->State.IsActive))
- return;
-
- #if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
- MIDI_Host_Flush(MIDIInterfaceInfo);
- #endif
-}
-
-uint8_t MIDI_Host_Flush(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MIDIInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_BytesInPipe())
- {
- Pipe_ClearOUT();
-
- if ((ErrorCode = Pipe_WaitUntilReady()) != PIPE_READYWAIT_NoError)
- {
- Pipe_Freeze();
- return ErrorCode;
- }
- }
-
- Pipe_Freeze();
-
- return PIPE_READYWAIT_NoError;
-}
-
-uint8_t MIDI_Host_SendEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo,
- MIDI_EventPacket_t* const Event)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MIDIInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if ((ErrorCode = Pipe_Write_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL)) != PIPE_RWSTREAM_NoError)
- {
- Pipe_Freeze();
- return ErrorCode;
- }
-
- if (!(Pipe_IsReadWriteAllowed()))
- Pipe_ClearOUT();
-
- Pipe_Freeze();
-
- return PIPE_RWSTREAM_NoError;
-}
-
-bool MIDI_Host_ReceiveEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo,
- MIDI_EventPacket_t* const Event)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MIDIInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- bool DataReady = false;
-
- Pipe_SelectPipe(MIDIInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsINReceived())
- {
- if (Pipe_BytesInPipe())
- {
- Pipe_Read_Stream_LE(Event, sizeof(MIDI_EventPacket_t), NULL);
- DataReady = true;
- }
-
- if (!(Pipe_BytesInPipe()))
- Pipe_ClearIN();
- }
-
- Pipe_Freeze();
-
- return DataReady;
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h deleted file mode 100644 index 15b9e4fc1..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MIDIClassHost.h +++ /dev/null @@ -1,190 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Host mode driver for the library USB MIDI Class driver.
- *
- * Host mode driver for the library USB MIDI Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassMIDI
- * \defgroup Group_USBClassMIDIHost MIDI Class Host Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/MIDIClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Host Mode USB Class driver framework interface, for the MIDI USB Class driver.
- *
- * @{
- */
-
-#ifndef __MIDI_CLASS_HOST_H__
-#define __MIDI_CLASS_HOST_H__
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/MIDIClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_MIDI_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** \brief MIDI Class Host Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the MIDI class driver functions as the \c MIDIInterfaceInfo parameter. This
- * stores each MIDI interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
- USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
- * after \ref MIDI_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state.
- */
- uint8_t InterfaceNumber; /**< Interface index of the MIDI interface within the attached device. */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * <b>may</b> be set to initial values, but may also be ignored to default to sane values when
- * the interface is enumerated.
- */
- } USB_ClassInfo_MIDI_Host_t;
-
- /* Enums: */
- /** Enum for the possible error codes returned by the \ref MIDI_Host_ConfigurePipes() function. */
- enum MIDI_Host_EnumerationFailure_ErrorCodes_t
- {
- MIDI_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
- MIDI_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
- MIDI_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible MIDI interface was not found in the device's Configuration Descriptor. */
- MIDI_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
- };
-
- /* Function Prototypes: */
- /** Host interface configuration routine, to configure a given MIDI host interface instance using the Configuration
- * Descriptor read from an attached USB device. This function automatically updates the given MIDI Host instance's
- * state values and configures the pipes required to communicate with the interface if it is found within the device.
- * This should be called once after the stack has enumerated the attached device, while the host state machine is in
- * the Addressed state.
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing an MIDI Class host configuration and state.
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
- * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor.
- *
- * \return A value from the \ref MIDI_Host_EnumerationFailure_ErrorCodes_t enum.
- */
- uint8_t MIDI_Host_ConfigurePipes(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** General management task for a given MIDI host class interface, required for the correct operation of the interface. This should
- * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing an MIDI Class host configuration and state.
- */
- void MIDI_Host_USBTask(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a MIDI event packet to the device. If no device is connected, the event packet is discarded.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state.
- * \param[in] Event Pointer to a populated USB_MIDI_EventPacket_t structure containing the MIDI event to send.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t MIDI_Host_SendEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo,
- MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Flushes the MIDI send buffer, sending any queued MIDI events to the device. This should be called to override the
- * \ref MIDI_Host_SendEventPacket() function's packing behavior, to flush queued events. Events are queued into the
- * pipe bank until either the pipe bank is full, or \ref MIDI_Host_Flush() is called. This allows for multiple MIDI
- * events to be packed into a single pipe packet, increasing data throughput.
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state.
- *
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t MIDI_Host_Flush(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Receives a MIDI event packet from the device.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] MIDIInterfaceInfo Pointer to a structure containing a MIDI Class configuration and state.
- * \param[out] Event Pointer to a USB_MIDI_EventPacket_t structure where the received MIDI event is to be placed.
- *
- * \return Boolean \c true if a MIDI event packet was received, \c false otherwise.
- */
- bool MIDI_Host_ReceiveEventPacket(USB_ClassInfo_MIDI_Host_t* const MIDIInterfaceInfo,
- MIDI_EventPacket_t* const Event) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_MIDI_HOST_C)
- static uint8_t DCOMP_MIDI_Host_NextMIDIStreamingInterface(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_MIDI_Host_NextMIDIStreamingDataEndpoint(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c deleted file mode 100644 index 91e2ef022..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c +++ /dev/null @@ -1,579 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_MS_DRIVER
-#define __INCLUDE_FROM_MASSSTORAGE_HOST_C
-#include "MassStorageClassHost.h"
-
-uint8_t MS_Host_ConfigurePipes(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData)
-{
- USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
- USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
- USB_Descriptor_Interface_t* MassStorageInterface = NULL;
-
- memset(&MSInterfaceInfo->State, 0x00, sizeof(MSInterfaceInfo->State));
-
- if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
- return MS_ENUMERROR_InvalidConfigDescriptor;
-
- while (!(DataINEndpoint) || !(DataOUTEndpoint))
- {
- if (!(MassStorageInterface) ||
- USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_MS_Host_NextMSInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_MS_Host_NextMSInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return MS_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- MassStorageInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
-
- DataINEndpoint = NULL;
- DataOUTEndpoint = NULL;
-
- continue;
- }
-
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
-
- if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
- DataINEndpoint = EndpointData;
- else
- DataOUTEndpoint = EndpointData;
- }
-
- MSInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
- MSInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
- MSInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
- MSInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
- MSInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
- MSInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
- if (!(Pipe_ConfigurePipeTable(&MSInterfaceInfo->Config.DataINPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&MSInterfaceInfo->Config.DataOUTPipe, 1)))
- return false;
-
- MSInterfaceInfo->State.InterfaceNumber = MassStorageInterface->InterfaceNumber;
- MSInterfaceInfo->State.IsActive = true;
-
- return MS_ENUMERROR_NoError;
-}
-
-static uint8_t DCOMP_MS_Host_NextMSInterface(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if ((Interface->Class == MS_CSCP_MassStorageClass) &&
- (Interface->SubClass == MS_CSCP_SCSITransparentSubclass) &&
- (Interface->Protocol == MS_CSCP_BulkOnlyTransportProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_MS_Host_NextMSInterfaceEndpoint(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Endpoint)
- {
- USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
- uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK);
-
- if ((EndpointType == EP_TYPE_BULK) && (!(Pipe_IsEndpointBound(Endpoint->EndpointAddress))))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
- else if (Header->Type == DTYPE_Interface)
- {
- return DESCRIPTOR_SEARCH_Fail;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t MS_Host_SendCommand(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- MS_CommandBlockWrapper_t* const SCSICommandBlock,
- const void* const BufferPtr)
-{
- uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
-
- if (++MSInterfaceInfo->State.TransactionTag == 0xFFFFFFFF)
- MSInterfaceInfo->State.TransactionTag = 1;
-
- SCSICommandBlock->Signature = CPU_TO_LE32(MS_CBW_SIGNATURE);
- SCSICommandBlock->Tag = cpu_to_le32(MSInterfaceInfo->State.TransactionTag);
-
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if ((ErrorCode = Pipe_Write_Stream_LE(SCSICommandBlock, sizeof(MS_CommandBlockWrapper_t),
- NULL)) != PIPE_RWSTREAM_NoError)
- {
- return ErrorCode;
- }
-
- Pipe_ClearOUT();
- Pipe_WaitUntilReady();
-
- Pipe_Freeze();
-
- if (BufferPtr != NULL)
- {
- ErrorCode = MS_Host_SendReceiveData(MSInterfaceInfo, SCSICommandBlock, (void*)BufferPtr);
-
- if ((ErrorCode != PIPE_RWSTREAM_NoError) && (ErrorCode != PIPE_RWSTREAM_PipeStalled))
- {
- Pipe_Freeze();
- return ErrorCode;
- }
- }
-
- MS_CommandStatusWrapper_t SCSIStatusBlock;
- return MS_Host_GetReturnedStatus(MSInterfaceInfo, &SCSIStatusBlock);
-}
-
-static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo)
-{
- uint16_t TimeoutMSRem = MS_COMMAND_DATA_TIMEOUT_MS;
- uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber();
-
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- while (!(Pipe_IsINReceived()))
- {
- uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber();
-
- if (CurrentFrameNumber != PreviousFrameNumber)
- {
- PreviousFrameNumber = CurrentFrameNumber;
-
- if (!(TimeoutMSRem--))
- return PIPE_RWSTREAM_Timeout;
- }
-
- Pipe_Freeze();
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsStalled())
- {
- USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
- return PIPE_RWSTREAM_PipeStalled;
- }
-
- Pipe_Freeze();
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsStalled())
- {
- USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
- return PIPE_RWSTREAM_PipeStalled;
- }
-
- if (USB_HostState == HOST_STATE_Unattached)
- return PIPE_RWSTREAM_DeviceDisconnected;
- };
-
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Freeze();
-
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Freeze();
-
- return PIPE_RWSTREAM_NoError;
-}
-
-static uint8_t MS_Host_SendReceiveData(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- MS_CommandBlockWrapper_t* const SCSICommandBlock,
- void* BufferPtr)
-{
- uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
- uint16_t BytesRem = le32_to_cpu(SCSICommandBlock->DataTransferLength);
-
- if (SCSICommandBlock->Flags & MS_COMMAND_DIR_DATA_IN)
- {
- if ((ErrorCode = MS_Host_WaitForDataReceived(MSInterfaceInfo)) != PIPE_RWSTREAM_NoError)
- {
- Pipe_Freeze();
- return ErrorCode;
- }
-
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if ((ErrorCode = Pipe_Read_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- Pipe_ClearIN();
- }
- else
- {
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if ((ErrorCode = Pipe_Write_Stream_LE(BufferPtr, BytesRem, NULL)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- Pipe_ClearOUT();
-
- while (!(Pipe_IsOUTReady()))
- {
- if (USB_HostState == HOST_STATE_Unattached)
- return PIPE_RWSTREAM_DeviceDisconnected;
- }
- }
-
- Pipe_Freeze();
-
- return ErrorCode;
-}
-
-static uint8_t MS_Host_GetReturnedStatus(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- MS_CommandStatusWrapper_t* const SCSICommandStatus)
-{
- uint8_t ErrorCode = PIPE_RWSTREAM_NoError;
-
- if ((ErrorCode = MS_Host_WaitForDataReceived(MSInterfaceInfo)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if ((ErrorCode = Pipe_Read_Stream_LE(SCSICommandStatus, sizeof(MS_CommandStatusWrapper_t),
- NULL)) != PIPE_RWSTREAM_NoError)
- {
- return ErrorCode;
- }
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- if (SCSICommandStatus->Status != MS_SCSI_COMMAND_Pass)
- ErrorCode = MS_ERROR_LOGICAL_CMD_FAILED;
-
- return ErrorCode;
-}
-
-uint8_t MS_Host_ResetMSInterface(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo)
-{
- uint8_t ErrorCode;
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = MS_REQ_MassStorageReset,
- .wValue = 0,
- .wIndex = MSInterfaceInfo->State.InterfaceNumber,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
- return ErrorCode;
-
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataINPipe.Address);
-
- if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful)
- return ErrorCode;
-
- Pipe_SelectPipe(MSInterfaceInfo->Config.DataOUTPipe.Address);
-
- if ((ErrorCode = USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress())) != HOST_SENDCONTROL_Successful)
- return ErrorCode;
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t MS_Host_GetMaxLUN(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- uint8_t* const MaxLUNIndex)
-{
- uint8_t ErrorCode;
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = MS_REQ_GetMaxLUN,
- .wValue = 0,
- .wIndex = MSInterfaceInfo->State.InterfaceNumber,
- .wLength = 1,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- if ((ErrorCode = USB_Host_SendControlRequest(MaxLUNIndex)) == HOST_SENDCONTROL_SetupStalled)
- {
- *MaxLUNIndex = 0;
- ErrorCode = HOST_SENDCONTROL_Successful;
- }
-
- return ErrorCode;
-}
-
-uint8_t MS_Host_GetInquiryData(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- SCSI_Inquiry_Response_t* const InquiryData)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MSInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
- {
- .DataTransferLength = CPU_TO_LE32(sizeof(SCSI_Inquiry_Response_t)),
- .Flags = MS_COMMAND_DIR_DATA_IN,
- .LUN = LUNIndex,
- .SCSICommandLength = 6,
- .SCSICommandData =
- {
- SCSI_CMD_INQUIRY,
- 0x00, // Reserved
- 0x00, // Reserved
- 0x00, // Reserved
- sizeof(SCSI_Inquiry_Response_t), // Allocation Length
- 0x00 // Unused (control)
- }
- };
-
- return MS_Host_SendCommand(MSInterfaceInfo, &SCSICommandBlock, InquiryData);
-}
-
-uint8_t MS_Host_TestUnitReady(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MSInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
- {
- .DataTransferLength = CPU_TO_LE32(0),
- .Flags = MS_COMMAND_DIR_DATA_IN,
- .LUN = LUNIndex,
- .SCSICommandLength = 6,
- .SCSICommandData =
- {
- SCSI_CMD_TEST_UNIT_READY,
- 0x00, // Reserved
- 0x00, // Reserved
- 0x00, // Reserved
- 0x00, // Reserved
- 0x00 // Unused (control)
- }
- };
-
- return MS_Host_SendCommand(MSInterfaceInfo, &SCSICommandBlock, NULL);
-}
-
-uint8_t MS_Host_ReadDeviceCapacity(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- SCSI_Capacity_t* const DeviceCapacity)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MSInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
- {
- .DataTransferLength = CPU_TO_LE32(sizeof(SCSI_Capacity_t)),
- .Flags = MS_COMMAND_DIR_DATA_IN,
- .LUN = LUNIndex,
- .SCSICommandLength = 10,
- .SCSICommandData =
- {
- SCSI_CMD_READ_CAPACITY_10,
- 0x00, // Reserved
- 0x00, // MSB of Logical block address
- 0x00,
- 0x00,
- 0x00, // LSB of Logical block address
- 0x00, // Reserved
- 0x00, // Reserved
- 0x00, // Partial Medium Indicator
- 0x00 // Unused (control)
- }
- };
-
- if ((ErrorCode = MS_Host_SendCommand(MSInterfaceInfo, &SCSICommandBlock, DeviceCapacity)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- DeviceCapacity->Blocks = BE32_TO_CPU(DeviceCapacity->Blocks);
- DeviceCapacity->BlockSize = BE32_TO_CPU(DeviceCapacity->BlockSize);
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t MS_Host_RequestSense(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- SCSI_Request_Sense_Response_t* const SenseData)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MSInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
- {
- .DataTransferLength = CPU_TO_LE32(sizeof(SCSI_Request_Sense_Response_t)),
- .Flags = MS_COMMAND_DIR_DATA_IN,
- .LUN = LUNIndex,
- .SCSICommandLength = 6,
- .SCSICommandData =
- {
- SCSI_CMD_REQUEST_SENSE,
- 0x00, // Reserved
- 0x00, // Reserved
- 0x00, // Reserved
- sizeof(SCSI_Request_Sense_Response_t), // Allocation Length
- 0x00 // Unused (control)
- }
- };
-
- return MS_Host_SendCommand(MSInterfaceInfo, &SCSICommandBlock, SenseData);
-}
-
-uint8_t MS_Host_PreventAllowMediumRemoval(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- const bool PreventRemoval)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MSInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
- {
- .DataTransferLength = CPU_TO_LE32(0),
- .Flags = MS_COMMAND_DIR_DATA_OUT,
- .LUN = LUNIndex,
- .SCSICommandLength = 6,
- .SCSICommandData =
- {
- SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL,
- 0x00, // Reserved
- 0x00, // Reserved
- PreventRemoval, // Prevent flag
- 0x00, // Reserved
- 0x00 // Unused (control)
- }
- };
-
- return MS_Host_SendCommand(MSInterfaceInfo, &SCSICommandBlock, NULL);
-}
-
-uint8_t MS_Host_ReadDeviceBlocks(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- const uint32_t BlockAddress,
- const uint8_t Blocks,
- const uint16_t BlockSize,
- void* BlockBuffer)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MSInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
- {
- .DataTransferLength = cpu_to_le32((uint32_t)Blocks * BlockSize),
- .Flags = MS_COMMAND_DIR_DATA_IN,
- .LUN = LUNIndex,
- .SCSICommandLength = 10,
- .SCSICommandData =
- {
- SCSI_CMD_READ_10,
- 0x00, // Unused (control bits, all off)
- (BlockAddress >> 24), // MSB of Block Address
- (BlockAddress >> 16),
- (BlockAddress >> 8),
- (BlockAddress & 0xFF), // LSB of Block Address
- 0x00, // Reserved
- 0x00, // MSB of Total Blocks to Read
- Blocks, // LSB of Total Blocks to Read
- 0x00 // Unused (control)
- }
- };
-
- return MS_Host_SendCommand(MSInterfaceInfo, &SCSICommandBlock, BlockBuffer);
-}
-
-uint8_t MS_Host_WriteDeviceBlocks(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- const uint32_t BlockAddress,
- const uint8_t Blocks,
- const uint16_t BlockSize,
- const void* BlockBuffer)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(MSInterfaceInfo->State.IsActive))
- return HOST_SENDCONTROL_DeviceDisconnected;
-
- MS_CommandBlockWrapper_t SCSICommandBlock = (MS_CommandBlockWrapper_t)
- {
- .DataTransferLength = cpu_to_le32((uint32_t)Blocks * BlockSize),
- .Flags = MS_COMMAND_DIR_DATA_OUT,
- .LUN = LUNIndex,
- .SCSICommandLength = 10,
- .SCSICommandData =
- {
- SCSI_CMD_WRITE_10,
- 0x00, // Unused (control bits, all off)
- (BlockAddress >> 24), // MSB of Block Address
- (BlockAddress >> 16),
- (BlockAddress >> 8),
- (BlockAddress & 0xFF), // LSB of Block Address
- 0x00, // Reserved
- 0x00, // MSB of Total Blocks to Write
- Blocks, // LSB of Total Blocks to Write
- 0x00 // Unused (control)
- }
- };
-
- return MS_Host_SendCommand(MSInterfaceInfo, &SCSICommandBlock, BlockBuffer);
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h deleted file mode 100644 index 2e7843184..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/MassStorageClassHost.h +++ /dev/null @@ -1,335 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Host mode driver for the library USB Mass Storage Class driver.
- *
- * Host mode driver for the library USB Mass Storage Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassMS
- * \defgroup Group_USBClassMassStorageHost Mass Storage Class Host Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Host Mode USB Class driver framework interface, for the Mass Storage USB Class driver.
- *
- * @{
- */
-
-#ifndef __MS_CLASS_HOST_H__
-#define __MS_CLASS_HOST_H__
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/MassStorageClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_MS_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Error code for some Mass Storage Host functions, indicating a logical (and not hardware) error. */
- #define MS_ERROR_LOGICAL_CMD_FAILED 0x80
-
- /* Type Defines: */
- /** \brief Mass Storage Class Host Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the Mass Storage class driver functions as the \c MSInterfaceInfo parameter. This
- * stores each Mass Storage interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
- USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
- * after \ref MS_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state.
- */
- uint8_t InterfaceNumber; /**< Interface index of the Mass Storage interface within the attached device. */
-
- uint32_t TransactionTag; /**< Current transaction tag for data synchronizing of packets. */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * <b>may</b> be set to initial values, but may also be ignored to default to sane values when
- * the interface is enumerated.
- */
- } USB_ClassInfo_MS_Host_t;
-
- /** \brief SCSI Device LUN Capacity Structure.
- *
- * SCSI capacity structure, to hold the total capacity of the device in both the number
- * of blocks in the current LUN, and the size of each block. This structure is filled by
- * the device when the \ref MS_Host_ReadDeviceCapacity() function is called.
- */
- typedef struct
- {
- uint32_t Blocks; /**< Number of blocks in the addressed LUN of the device. */
- uint32_t BlockSize; /**< Number of bytes in each block in the addressed LUN. */
- } SCSI_Capacity_t;
-
- /* Enums: */
- /** Enum for the possible error codes returned by the \ref MS_Host_ConfigurePipes() function. */
- enum MS_Host_EnumerationFailure_ErrorCodes_t
- {
- MS_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
- MS_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
- MS_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible Mass Storage interface was not found in the device's Configuration Descriptor. */
- MS_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
- };
-
- /* Function Prototypes: */
- /** Host interface configuration routine, to configure a given Mass Storage host interface instance using the
- * Configuration Descriptor read from an attached USB device. This function automatically updates the given Mass
- * Storage Host instance's state values and configures the pipes required to communicate with the interface if it
- * is found within the device. This should be called once after the stack has enumerated the attached device, while
- * the host state machine is in the Addressed state.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing an MS Class host configuration and state.
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
- * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor.
- *
- * \return A value from the \ref MS_Host_EnumerationFailure_ErrorCodes_t enum.
- */
- uint8_t MS_Host_ConfigurePipes(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Sends a MASS STORAGE RESET control request to the attached device, resetting the Mass Storage Interface
- * and readying it for the next Mass Storage command. This should be called after a failed SCSI request to
- * ensure the attached Mass Storage device is ready to receive the next command.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t MS_Host_ResetMSInterface(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a GET MAX LUN control request to the attached device, retrieving the index of the highest LUN (Logical
- * UNit, a logical drive) in the device. This value can then be used in the other functions of the Mass Storage
- * Host mode Class driver to address a specific LUN within the device.
- *
- * \note Some devices do not support this request, and will STALL it when issued. To get around this,
- * on unsupported devices the max LUN index will be reported as zero and no error will be returned
- * if the device STALLs the request.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state.
- * \param[out] MaxLUNIndex Pointer to a location where the highest LUN index value should be stored.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t MS_Host_GetMaxLUN(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- uint8_t* const MaxLUNIndex) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Retrieves the Mass Storage device's inquiry data for the specified LUN, indicating the device characteristics and
- * properties.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state.
- * \param[in] LUNIndex LUN index within the device the command is being issued to.
- * \param[out] InquiryData Location where the read inquiry data should be stored.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED.
- */
- uint8_t MS_Host_GetInquiryData(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- SCSI_Inquiry_Response_t* const InquiryData) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(3);
-
- /** Sends a TEST UNIT READY command to the device, to determine if it is ready to accept other SCSI commands.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state.
- * \param[in] LUNIndex LUN index within the device the command is being issued to.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
- */
- uint8_t MS_Host_TestUnitReady(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Retrieves the total capacity of the attached USB Mass Storage device, in blocks, and block size.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state.
- * \param[in] LUNIndex LUN index within the device the command is being issued to.
- * \param[out] DeviceCapacity Pointer to the location where the capacity information should be stored.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
- */
- uint8_t MS_Host_ReadDeviceCapacity(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- SCSI_Capacity_t* const DeviceCapacity) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(3);
-
- /** Retrieves the device sense data, indicating the current device state and error codes for the previously
- * issued command.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state.
- * \param[in] LUNIndex LUN index within the device the command is being issued to.
- * \param[out] SenseData Pointer to the location where the sense information should be stored.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
- */
- uint8_t MS_Host_RequestSense(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- SCSI_Request_Sense_Response_t* const SenseData) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(3);
-
- /** Issues a PREVENT MEDIUM REMOVAL command, to logically (or, depending on the type of device, physically) lock
- * the device from removal so that blocks of data on the medium can be read or altered.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state.
- * \param[in] LUNIndex LUN index within the device the command is being issued to.
- * \param[in] PreventRemoval Boolean \c true if the device should be locked from removal, \c false otherwise.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
- */
- uint8_t MS_Host_PreventAllowMediumRemoval(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- const bool PreventRemoval) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads blocks of data from the attached Mass Storage device's medium.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state.
- * \param[in] LUNIndex LUN index within the device the command is being issued to.
- * \param[in] BlockAddress Starting block address within the device to read from.
- * \param[in] Blocks Total number of blocks to read.
- * \param[in] BlockSize Size in bytes of each block within the device.
- * \param[out] BlockBuffer Pointer to where the read data from the device should be stored.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
- */
- uint8_t MS_Host_ReadDeviceBlocks(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- const uint32_t BlockAddress,
- const uint8_t Blocks,
- const uint16_t BlockSize,
- void* BlockBuffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(6);
-
- /** Writes blocks of data to the attached Mass Storage device's medium.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing a MS Class host configuration and state.
- * \param[in] LUNIndex LUN index within the device the command is being issued to.
- * \param[in] BlockAddress Starting block address within the device to write to.
- * \param[in] Blocks Total number of blocks to read.
- * \param[in] BlockSize Size in bytes of each block within the device.
- * \param[in] BlockBuffer Pointer to where the data to write should be sourced from.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum or \ref MS_ERROR_LOGICAL_CMD_FAILED if not ready.
- */
- uint8_t MS_Host_WriteDeviceBlocks(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- const uint8_t LUNIndex,
- const uint32_t BlockAddress,
- const uint8_t Blocks,
- const uint16_t BlockSize,
- const void* BlockBuffer) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(6);
-
- /* Inline Functions: */
- /** General management task for a given Mass Storage host class interface, required for the correct operation of
- * the interface. This should be called frequently in the main program loop, before the master USB management task
- * \ref USB_USBTask().
- *
- * \param[in,out] MSInterfaceInfo Pointer to a structure containing an Mass Storage Class host configuration and state.
- */
- static inline void MS_Host_USBTask(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void MS_Host_USBTask(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo)
- {
- (void)MSInterfaceInfo;
- }
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define MS_COMMAND_DATA_TIMEOUT_MS 10000
-
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_MASSSTORAGE_HOST_C)
- static uint8_t MS_Host_SendCommand(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- MS_CommandBlockWrapper_t* const SCSICommandBlock,
- const void* const BufferPtr) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
- static uint8_t MS_Host_WaitForDataReceived(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t MS_Host_SendReceiveData(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- MS_CommandBlockWrapper_t* const SCSICommandBlock,
- void* BufferPtr) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
- static uint8_t MS_Host_GetReturnedStatus(USB_ClassInfo_MS_Host_t* const MSInterfaceInfo,
- MS_CommandStatusWrapper_t* const SCSICommandStatus)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- static uint8_t DCOMP_MS_Host_NextMSInterface(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_MS_Host_NextMSInterfaceEndpoint(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c deleted file mode 100644 index 1ecf19115..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/PrinterClassHost.c +++ /dev/null @@ -1,400 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_PRINTER_DRIVER
-#define __INCLUDE_FROM_PRINTER_HOST_C
-#include "PrinterClassHost.h"
-
-uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData)
-{
- USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
- USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
- USB_Descriptor_Interface_t* PrinterInterface = NULL;
-
- memset(&PRNTInterfaceInfo->State, 0x00, sizeof(PRNTInterfaceInfo->State));
-
- if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
- return PRNT_ENUMERROR_InvalidConfigDescriptor;
-
- while (!(DataINEndpoint) || !(DataOUTEndpoint))
- {
- if (!(PrinterInterface) ||
- USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_PRNT_Host_NextPRNTInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_PRNT_Host_NextPRNTInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return PRNT_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- PrinterInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
-
- DataINEndpoint = NULL;
- DataOUTEndpoint = NULL;
-
- continue;
- }
-
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
-
- if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
- DataINEndpoint = EndpointData;
- else
- DataOUTEndpoint = EndpointData;
- }
-
- PRNTInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
- PRNTInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
- PRNTInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
- PRNTInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
- PRNTInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
- PRNTInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
- if (!(Pipe_ConfigurePipeTable(&PRNTInterfaceInfo->Config.DataINPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&PRNTInterfaceInfo->Config.DataOUTPipe, 1)))
- return false;
-
- PRNTInterfaceInfo->State.InterfaceNumber = PrinterInterface->InterfaceNumber;
- PRNTInterfaceInfo->State.AlternateSetting = PrinterInterface->AlternateSetting;
- PRNTInterfaceInfo->State.IsActive = true;
-
- return PRNT_ENUMERROR_NoError;
-}
-
-static uint8_t DCOMP_PRNT_Host_NextPRNTInterface(void* CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if ((Interface->Class == PRNT_CSCP_PrinterClass) &&
- (Interface->SubClass == PRNT_CSCP_PrinterSubclass) &&
- (Interface->Protocol == PRNT_CSCP_BidirectionalProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_PRNT_Host_NextPRNTInterfaceEndpoint(void* CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Endpoint)
- {
- USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
- uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK);
-
- if (EndpointType == EP_TYPE_BULK)
- return DESCRIPTOR_SEARCH_Found;
- }
- else if (Header->Type == DTYPE_Interface)
- {
- return DESCRIPTOR_SEARCH_Fail;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive))
- return;
-
- #if !defined(NO_CLASS_DRIVER_AUTOFLUSH)
- PRNT_Host_Flush(PRNTInterfaceInfo);
- #endif
-}
-
-uint8_t PRNT_Host_SetBidirectionalMode(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo)
-{
- if (PRNTInterfaceInfo->State.AlternateSetting)
- {
- uint8_t ErrorCode;
-
- if ((ErrorCode = USB_Host_SetInterfaceAltSetting(PRNTInterfaceInfo->State.InterfaceNumber,
- PRNTInterfaceInfo->State.AlternateSetting)) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
- }
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t PRNT_Host_GetPortStatus(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- uint8_t* const PortStatus)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = PRNT_REQ_GetPortStatus,
- .wValue = 0,
- .wIndex = PRNTInterfaceInfo->State.InterfaceNumber,
- .wLength = sizeof(uint8_t),
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
- return USB_Host_SendControlRequest(PortStatus);
-}
-
-uint8_t PRNT_Host_SoftReset(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = PRNT_REQ_SoftReset,
- .wValue = 0,
- .wIndex = PRNTInterfaceInfo->State.InterfaceNumber,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
- return USB_Host_SendControlRequest(NULL);
-}
-
-uint8_t PRNT_Host_Flush(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if (!(Pipe_BytesInPipe()))
- return PIPE_READYWAIT_NoError;
-
- bool BankFull = !(Pipe_IsReadWriteAllowed());
-
- Pipe_ClearOUT();
-
- if (BankFull)
- {
- if ((ErrorCode = Pipe_WaitUntilReady()) != PIPE_READYWAIT_NoError)
- return ErrorCode;
-
- Pipe_ClearOUT();
- }
-
- Pipe_Freeze();
-
- return PIPE_READYWAIT_NoError;
-}
-
-uint8_t PRNT_Host_SendByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- const uint8_t Data)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearOUT();
-
- if ((ErrorCode = Pipe_WaitUntilReady()) != PIPE_READYWAIT_NoError)
- return ErrorCode;
- }
-
- Pipe_Write_8(Data);
- Pipe_Freeze();
-
- return PIPE_READYWAIT_NoError;
-}
-
-uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- const char* const String)
-{
- uint8_t ErrorCode;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if ((ErrorCode = Pipe_Write_Stream_LE(String, strlen(String), NULL)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- Pipe_ClearOUT();
-
- ErrorCode = Pipe_WaitUntilReady();
-
- Pipe_Freeze();
-
- return ErrorCode;
-}
-
-uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- void* Buffer,
- const uint16_t Length)
-{
- uint8_t ErrorCode;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if ((ErrorCode = Pipe_Write_Stream_LE(Buffer, Length, NULL)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- Pipe_ClearOUT();
-
- ErrorCode = Pipe_WaitUntilReady();
-
- Pipe_Freeze();
-
- return ErrorCode;
-}
-
-uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive))
- return 0;
-
- Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsINReceived())
- {
- if (!(Pipe_BytesInPipe()))
- {
- Pipe_ClearIN();
- Pipe_Freeze();
- return 0;
- }
- else
- {
- Pipe_Freeze();
- return Pipe_BytesInPipe();
- }
- }
- else
- {
- Pipe_Freeze();
-
- return 0;
- }
-}
-
-int16_t PRNT_Host_ReceiveByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(PRNTInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- int16_t ReceivedByte = -1;
-
- Pipe_SelectPipe(PRNTInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsINReceived())
- {
- if (Pipe_BytesInPipe())
- ReceivedByte = Pipe_Read_8();
-
- if (!(Pipe_BytesInPipe()))
- Pipe_ClearIN();
- }
-
- Pipe_Freeze();
-
- return ReceivedByte;
-}
-
-uint8_t PRNT_Host_GetDeviceID(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- char* const DeviceIDString,
- const uint16_t BufferSize)
-{
- uint8_t ErrorCode;
- uint16_t DeviceIDStringLength = 0;
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = PRNT_REQ_GetDeviceID,
- .wValue = 0,
- .wIndex = PRNTInterfaceInfo->State.InterfaceNumber,
- .wLength = sizeof(DeviceIDStringLength),
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- if ((ErrorCode = USB_Host_SendControlRequest(&DeviceIDStringLength)) != HOST_SENDCONTROL_Successful)
- return ErrorCode;
-
- if (!(DeviceIDStringLength))
- {
- DeviceIDString[0] = 0x00;
- return HOST_SENDCONTROL_Successful;
- }
-
- DeviceIDStringLength = be16_to_cpu(DeviceIDStringLength);
-
- if (DeviceIDStringLength > BufferSize)
- DeviceIDStringLength = BufferSize;
-
- USB_ControlRequest.wLength = DeviceIDStringLength;
-
- if ((ErrorCode = USB_Host_SendControlRequest(DeviceIDString)) != HOST_SENDCONTROL_Successful)
- return ErrorCode;
-
- memmove(&DeviceIDString[0], &DeviceIDString[2], DeviceIDStringLength - 2);
-
- DeviceIDString[DeviceIDStringLength - 2] = 0x00;
-
- return HOST_SENDCONTROL_Successful;
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h deleted file mode 100644 index 64494b1f6..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/PrinterClassHost.h +++ /dev/null @@ -1,285 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Host mode driver for the library USB Printer Class driver.
- *
- * Host mode driver for the library USB Printer Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassPrinter
- * \defgroup Group_USBClassPrinterHost Printer Class Host Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/PrinterClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Host Mode USB Class driver framework interface, for the Printer USB Class driver.
- *
- * @{
- */
-
-#ifndef __PRINTER_CLASS_HOST_H__
-#define __PRINTER_CLASS_HOST_H__
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/PrinterClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_PRINTER_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** \brief Printer Class Host Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the Printer class driver functions as the \c PRNTInterfaceInfo parameter. This
- * stores each Printer interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
- USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
- * after \ref PRNT_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state.
- */
- uint8_t InterfaceNumber; /**< Interface index of the Printer interface within the attached device. */
- uint8_t AlternateSetting; /**< Alternate setting within the Printer Interface in the attached device. */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * <b>may</b> be set to initial values, but may also be ignored to default to sane values when
- * the interface is enumerated.
- */
- } USB_ClassInfo_PRNT_Host_t;
-
- /* Enums: */
- /** Enum for the possible error codes returned by the \ref PRNT_Host_ConfigurePipes() function. */
- enum PRNT_Host_EnumerationFailure_ErrorCodes_t
- {
- PRNT_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
- PRNT_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
- PRNT_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible Printer interface was not found in the device's Configuration Descriptor. */
- PRNT_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
- };
-
- /* Function Prototypes: */
- /** Host interface configuration routine, to configure a given Printer host interface instance using the
- * Configuration Descriptor read from an attached USB device. This function automatically updates the given Printer
- * instance's state values and configures the pipes required to communicate with the interface if it is found within
- * the device. This should be called once after the stack has enumerated the attached device, while the host state
- * machine is in the Addressed state.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
- * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor.
- *
- * \return A value from the \ref PRNT_Host_EnumerationFailure_ErrorCodes_t enum.
- */
- uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** General management task for a given Printer host class interface, required for the correct operation of
- * the interface. This should be called frequently in the main program loop, before the master USB management task
- * \ref USB_USBTask().
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- */
- void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Configures the printer to enable Bidirectional mode, if it is not already in this mode. This should be called
- * once the connected device's configuration has been set, to ensure the printer is ready to accept commands.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t PRNT_Host_SetBidirectionalMode(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Retrieves the status of the virtual Printer port's inbound status lines. The result can then be masked against the
- * \c PRNT_PORTSTATUS_* macros to determine the printer port's status.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- * \param[out] PortStatus Location where the retrieved port status should be stored.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t PRNT_Host_GetPortStatus(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- uint8_t* const PortStatus)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Soft-resets the attached printer, readying it for new commands.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
- */
- uint8_t PRNT_Host_SoftReset(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- *
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t PRNT_Host_Flush(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends the given null terminated string to the attached printer's input endpoint.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- * \param[in] String Pointer to a null terminated string to send.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- const char* const String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Sends the given raw data stream to the attached printer's input endpoint. This should contain commands that the
- * printer is able to understand - for example, PCL data. Not all printers accept all printer languages; see
- * \ref PRNT_Host_GetDeviceID() for details on determining acceptable languages for an attached printer.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- * \param[in] Buffer Pointer to a buffer containing the raw command stream to send to the printer.
- * \param[in] Length Size in bytes of the command stream to be sent.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- void* Buffer,
- const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the
- * byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the
- * \ref PRNT_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
- * packed into a single pipe packet, increasing data throughput.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- * \param[in] Data Byte of data to send to the device.
- *
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t PRNT_Host_SendByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Determines the number of bytes received by the printer interface from the device, waiting to be read. This indicates the number
- * of bytes in the IN pipe bank only, and thus the number of calls to \ref PRNT_Host_ReceiveByte() which are guaranteed to succeed
- * immediately. If multiple bytes are to be received, they should be buffered by the user application, as the pipe bank will not be
- * released back to the USB controller until all bytes are read.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- *
- * \return Total number of buffered bytes received from the device.
- */
- uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo);
-
- /** Reads a byte of data from the device. If no data is waiting to be read of if a USB device is not connected, the function
- * returns a negative value. The \ref PRNT_Host_BytesReceived() function may be queried in advance to determine how many bytes
- * are currently buffered in the Printer interface's data receive pipe.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- *
- * \return Next received byte from the device, or a negative value if no data received.
- */
- int16_t PRNT_Host_ReceiveByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo);
-
- /** Retrieves the attached printer device's ID string, formatted according to IEEE 1284. This string is sent as a
- * Unicode string from the device and is automatically converted to an ASCII encoded C string by this function, thus
- * the maximum reportable string length is two less than the size given (to accommodate the Unicode string length
- * bytes which are removed).
- *
- * This string, when supported, contains the model, manufacturer and acceptable printer languages for the attached device.
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- * \param[out] DeviceIDString Pointer to a buffer where the Device ID string should be stored, in ASCII format.
- * \param[in] BufferSize Size in bytes of the buffer allocated for the Device ID string.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t PRNT_Host_GetDeviceID(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- char* const DeviceIDString,
- const uint16_t BufferSize) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_PRINTER_HOST_C)
- static uint8_t DCOMP_PRNT_Host_NextPRNTInterface(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_PRNT_Host_NextPRNTInterfaceEndpoint(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c deleted file mode 100644 index 1e23f8e7c..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/RNDISClassHost.c +++ /dev/null @@ -1,476 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_RNDIS_DRIVER
-#define __INCLUDE_FROM_RNDIS_HOST_C
-#include "RNDISClassHost.h"
-
-uint8_t RNDIS_Host_ConfigurePipes(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData)
-{
- USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
- USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
- USB_Descriptor_Endpoint_t* NotificationEndpoint = NULL;
- USB_Descriptor_Interface_t* RNDISControlInterface = NULL;
-
- memset(&RNDISInterfaceInfo->State, 0x00, sizeof(RNDISInterfaceInfo->State));
-
- if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
- return RNDIS_ENUMERROR_InvalidConfigDescriptor;
-
- RNDISControlInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
-
- while (!(DataINEndpoint) || !(DataOUTEndpoint) || !(NotificationEndpoint))
- {
- if (!(RNDISControlInterface) ||
- USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_RNDIS_Host_NextRNDISInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- if (NotificationEndpoint)
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_RNDIS_Host_NextRNDISDataInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return RNDIS_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- DataINEndpoint = NULL;
- DataOUTEndpoint = NULL;
- }
- else
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_RNDIS_Host_NextRNDISControlInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return RNDIS_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- RNDISControlInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
-
- NotificationEndpoint = NULL;
- }
-
- continue;
- }
-
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
-
- if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
- {
- if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
- NotificationEndpoint = EndpointData;
- else
- DataINEndpoint = EndpointData;
- }
- else
- {
- DataOUTEndpoint = EndpointData;
- }
- }
-
- RNDISInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
- RNDISInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
- RNDISInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
- RNDISInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
- RNDISInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
- RNDISInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
- RNDISInterfaceInfo->Config.NotificationPipe.Size = le16_to_cpu(NotificationEndpoint->EndpointSize);
- RNDISInterfaceInfo->Config.NotificationPipe.EndpointAddress = NotificationEndpoint->EndpointAddress;
- RNDISInterfaceInfo->Config.NotificationPipe.Type = EP_TYPE_INTERRUPT;
-
- if (!(Pipe_ConfigurePipeTable(&RNDISInterfaceInfo->Config.DataINPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&RNDISInterfaceInfo->Config.DataOUTPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&RNDISInterfaceInfo->Config.NotificationPipe, 1)))
- return false;
-
- RNDISInterfaceInfo->State.ControlInterfaceNumber = RNDISControlInterface->InterfaceNumber;
- RNDISInterfaceInfo->State.IsActive = true;
-
- return RNDIS_ENUMERROR_NoError;
-}
-
-static uint8_t DCOMP_RNDIS_Host_NextRNDISControlInterface(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if ((Interface->Class == CDC_CSCP_CDCClass) &&
- (Interface->SubClass == CDC_CSCP_ACMSubclass) &&
- (Interface->Protocol == CDC_CSCP_VendorSpecificProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_RNDIS_Host_NextRNDISDataInterface(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor,
- USB_Descriptor_Interface_t);
-
- if ((Interface->Class == CDC_CSCP_CDCDataClass) &&
- (Interface->SubClass == CDC_CSCP_NoDataSubclass) &&
- (Interface->Protocol == CDC_CSCP_NoDataProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t DCOMP_RNDIS_Host_NextRNDISInterfaceEndpoint(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Endpoint)
- {
- USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
- uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK);
-
- if (((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT)) &&
- !(Pipe_IsEndpointBound(Endpoint->EndpointAddress)))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
- else if (Header->Type == DTYPE_Interface)
- {
- return DESCRIPTOR_SEARCH_Fail;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-static uint8_t RNDIS_SendEncapsulatedCommand(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- void* Buffer,
- const uint16_t Length)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = RNDIS_REQ_SendEncapsulatedCommand,
- .wValue = 0,
- .wIndex = RNDISInterfaceInfo->State.ControlInterfaceNumber,
- .wLength = Length,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(Buffer);
-}
-
-static uint8_t RNDIS_GetEncapsulatedResponse(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- void* Buffer,
- const uint16_t Length)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE),
- .bRequest = RNDIS_REQ_GetEncapsulatedResponse,
- .wValue = 0,
- .wIndex = RNDISInterfaceInfo->State.ControlInterfaceNumber,
- .wLength = Length,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(Buffer);
-}
-
-uint8_t RNDIS_Host_SendKeepAlive(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo)
-{
- uint8_t ErrorCode;
-
- RNDIS_KeepAlive_Message_t KeepAliveMessage;
- RNDIS_KeepAlive_Complete_t KeepAliveMessageResponse;
-
- KeepAliveMessage.MessageType = CPU_TO_LE32(REMOTE_NDIS_KEEPALIVE_MSG);
- KeepAliveMessage.MessageLength = CPU_TO_LE32(sizeof(RNDIS_KeepAlive_Message_t));
- KeepAliveMessage.RequestId = cpu_to_le32(RNDISInterfaceInfo->State.RequestID++);
-
- if ((ErrorCode = RNDIS_SendEncapsulatedCommand(RNDISInterfaceInfo, &KeepAliveMessage,
- sizeof(RNDIS_KeepAlive_Message_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if ((ErrorCode = RNDIS_GetEncapsulatedResponse(RNDISInterfaceInfo, &KeepAliveMessageResponse,
- sizeof(RNDIS_KeepAlive_Complete_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t RNDIS_Host_InitializeDevice(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo)
-{
- uint8_t ErrorCode;
-
- RNDIS_Initialize_Message_t InitMessage;
- RNDIS_Initialize_Complete_t InitMessageResponse;
-
- InitMessage.MessageType = CPU_TO_LE32(REMOTE_NDIS_INITIALIZE_MSG);
- InitMessage.MessageLength = CPU_TO_LE32(sizeof(RNDIS_Initialize_Message_t));
- InitMessage.RequestId = cpu_to_le32(RNDISInterfaceInfo->State.RequestID++);
-
- InitMessage.MajorVersion = CPU_TO_LE32(REMOTE_NDIS_VERSION_MAJOR);
- InitMessage.MinorVersion = CPU_TO_LE32(REMOTE_NDIS_VERSION_MINOR);
- InitMessage.MaxTransferSize = cpu_to_le32(RNDISInterfaceInfo->Config.HostMaxPacketSize);
-
- if ((ErrorCode = RNDIS_SendEncapsulatedCommand(RNDISInterfaceInfo, &InitMessage,
- sizeof(RNDIS_Initialize_Message_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if ((ErrorCode = RNDIS_GetEncapsulatedResponse(RNDISInterfaceInfo, &InitMessageResponse,
- sizeof(RNDIS_Initialize_Complete_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if (InitMessageResponse.Status != CPU_TO_LE32(REMOTE_NDIS_STATUS_SUCCESS))
- return RNDIS_ERROR_LOGICAL_CMD_FAILED;
-
- RNDISInterfaceInfo->State.DeviceMaxPacketSize = le32_to_cpu(InitMessageResponse.MaxTransferSize);
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t RNDIS_Host_SetRNDISProperty(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- const uint32_t Oid,
- void* Buffer,
- const uint16_t Length)
-{
- uint8_t ErrorCode;
-
- struct
- {
- RNDIS_Set_Message_t SetMessage;
- uint8_t ContiguousBuffer[Length];
- } SetMessageData;
-
- RNDIS_Set_Complete_t SetMessageResponse;
-
- SetMessageData.SetMessage.MessageType = CPU_TO_LE32(REMOTE_NDIS_SET_MSG);
- SetMessageData.SetMessage.MessageLength = cpu_to_le32(sizeof(RNDIS_Set_Message_t) + Length);
- SetMessageData.SetMessage.RequestId = cpu_to_le32(RNDISInterfaceInfo->State.RequestID++);
-
- SetMessageData.SetMessage.Oid = cpu_to_le32(Oid);
- SetMessageData.SetMessage.InformationBufferLength = cpu_to_le32(Length);
- SetMessageData.SetMessage.InformationBufferOffset = CPU_TO_LE32(sizeof(RNDIS_Set_Message_t) - sizeof(RNDIS_Message_Header_t));
- SetMessageData.SetMessage.DeviceVcHandle = CPU_TO_LE32(0);
-
- memcpy(&SetMessageData.ContiguousBuffer, Buffer, Length);
-
- if ((ErrorCode = RNDIS_SendEncapsulatedCommand(RNDISInterfaceInfo, &SetMessageData,
- (sizeof(RNDIS_Set_Message_t) + Length))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if ((ErrorCode = RNDIS_GetEncapsulatedResponse(RNDISInterfaceInfo, &SetMessageResponse,
- sizeof(RNDIS_Set_Complete_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if (SetMessageResponse.Status != CPU_TO_LE32(REMOTE_NDIS_STATUS_SUCCESS))
- return RNDIS_ERROR_LOGICAL_CMD_FAILED;
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t RNDIS_Host_QueryRNDISProperty(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- const uint32_t Oid,
- void* Buffer,
- const uint16_t MaxLength)
-{
- uint8_t ErrorCode;
-
- RNDIS_Query_Message_t QueryMessage;
-
- struct
- {
- RNDIS_Query_Complete_t QueryMessageResponse;
- uint8_t ContiguousBuffer[MaxLength];
- } QueryMessageResponseData;
-
- QueryMessage.MessageType = CPU_TO_LE32(REMOTE_NDIS_QUERY_MSG);
- QueryMessage.MessageLength = CPU_TO_LE32(sizeof(RNDIS_Query_Message_t));
- QueryMessage.RequestId = cpu_to_le32(RNDISInterfaceInfo->State.RequestID++);
-
- QueryMessage.Oid = cpu_to_le32(Oid);
- QueryMessage.InformationBufferLength = CPU_TO_LE32(0);
- QueryMessage.InformationBufferOffset = CPU_TO_LE32(0);
- QueryMessage.DeviceVcHandle = CPU_TO_LE32(0);
-
- if ((ErrorCode = RNDIS_SendEncapsulatedCommand(RNDISInterfaceInfo, &QueryMessage,
- sizeof(RNDIS_Query_Message_t))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if ((ErrorCode = RNDIS_GetEncapsulatedResponse(RNDISInterfaceInfo, &QueryMessageResponseData,
- sizeof(QueryMessageResponseData))) != HOST_SENDCONTROL_Successful)
- {
- return ErrorCode;
- }
-
- if (QueryMessageResponseData.QueryMessageResponse.Status != CPU_TO_LE32(REMOTE_NDIS_STATUS_SUCCESS))
- return RNDIS_ERROR_LOGICAL_CMD_FAILED;
-
- memcpy(Buffer, &QueryMessageResponseData.ContiguousBuffer, MaxLength);
-
- return HOST_SENDCONTROL_Successful;
-}
-
-bool RNDIS_Host_IsPacketReceived(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo)
-{
- bool PacketWaiting;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(RNDISInterfaceInfo->State.IsActive))
- return false;
-
- Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataINPipe.Address);
-
- Pipe_Unfreeze();
- PacketWaiting = Pipe_IsINReceived();
- Pipe_Freeze();
-
- return PacketWaiting;
-}
-
-uint8_t RNDIS_Host_ReadPacket(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- void* Buffer,
- uint16_t* const PacketLength)
-{
- uint8_t ErrorCode;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(RNDISInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if (!(Pipe_IsReadWriteAllowed()))
- {
- if (Pipe_IsINReceived())
- Pipe_ClearIN();
-
- *PacketLength = 0;
- Pipe_Freeze();
- return PIPE_RWSTREAM_NoError;
- }
-
- RNDIS_Packet_Message_t DeviceMessage;
-
- if ((ErrorCode = Pipe_Read_Stream_LE(&DeviceMessage, sizeof(RNDIS_Packet_Message_t),
- NULL)) != PIPE_RWSTREAM_NoError)
- {
- return ErrorCode;
- }
-
- *PacketLength = (uint16_t)le32_to_cpu(DeviceMessage.DataLength);
-
- Pipe_Discard_Stream(le32_to_cpu(DeviceMessage.DataOffset) -
- (sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t)),
- NULL);
-
- Pipe_Read_Stream_LE(Buffer, *PacketLength, NULL);
-
- if (!(Pipe_BytesInPipe()))
- Pipe_ClearIN();
-
- Pipe_Freeze();
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t RNDIS_Host_SendPacket(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- void* Buffer,
- const uint16_t PacketLength)
-{
- uint8_t ErrorCode;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(RNDISInterfaceInfo->State.IsActive))
- return PIPE_READYWAIT_DeviceDisconnected;
-
- RNDIS_Packet_Message_t DeviceMessage;
-
- memset(&DeviceMessage, 0, sizeof(RNDIS_Packet_Message_t));
- DeviceMessage.MessageType = CPU_TO_LE32(REMOTE_NDIS_PACKET_MSG);
- DeviceMessage.MessageLength = CPU_TO_LE32(sizeof(RNDIS_Packet_Message_t) + PacketLength);
- DeviceMessage.DataOffset = CPU_TO_LE32(sizeof(RNDIS_Packet_Message_t) - sizeof(RNDIS_Message_Header_t));
- DeviceMessage.DataLength = cpu_to_le32(PacketLength);
-
- Pipe_SelectPipe(RNDISInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if ((ErrorCode = Pipe_Write_Stream_LE(&DeviceMessage, sizeof(RNDIS_Packet_Message_t),
- NULL)) != PIPE_RWSTREAM_NoError)
- {
- return ErrorCode;
- }
-
- Pipe_Write_Stream_LE(Buffer, PacketLength, NULL);
- Pipe_ClearOUT();
-
- Pipe_Freeze();
-
- return PIPE_RWSTREAM_NoError;
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h deleted file mode 100644 index bac6d5c2e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/RNDISClassHost.h +++ /dev/null @@ -1,270 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Host mode driver for the library USB RNDIS Class driver.
- *
- * Host mode driver for the library USB RNDIS Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassRNDIS
- * \defgroup Group_USBClassRNDISHost RNDIS Class Host Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/RNDISClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Host Mode USB Class driver framework interface, for the Microsoft RNDIS Ethernet
- * USB Class driver.
- *
- * @{
- */
-
-#ifndef __RNDIS_CLASS_HOST_H__
-#define __RNDIS_CLASS_HOST_H__
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/RNDISClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_RNDIS_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** \brief RNDIS Class Host Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the RNDIS class driver functions as the \c RNDISInterfaceInfo parameter. This
- * stores each RNDIS interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
- USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
- USB_Pipe_Table_t NotificationPipe; /**< Notification IN Pipe configuration table. */
-
- uint32_t HostMaxPacketSize; /**< Maximum size of a packet which can be buffered by the host. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
- * after \ref RNDIS_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state.
- */
- uint8_t ControlInterfaceNumber; /**< Interface index of the RNDIS control interface within the attached device. */
-
- uint32_t DeviceMaxPacketSize; /**< Maximum size of a packet which can be buffered by the attached RNDIS device. */
-
- uint32_t RequestID; /**< Request ID counter to give a unique ID for each command/response pair. */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * <b>may</b> be set to initial values, but may also be ignored to default to sane values when
- * the interface is enumerated.
- */
- } USB_ClassInfo_RNDIS_Host_t;
-
- /* Enums: */
- /** Enum for the possible error codes returned by the \ref RNDIS_Host_ConfigurePipes() function. */
- enum RNDIS_Host_EnumerationFailure_ErrorCodes_t
- {
- RNDIS_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
- RNDIS_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
- RNDIS_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible RNDIS interface was not found in the device's Configuration Descriptor. */
- RNDIS_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
- };
-
- /* Function Prototypes: */
- /** Host interface configuration routine, to configure a given RNDIS host interface instance using the Configuration
- * Descriptor read from an attached USB device. This function automatically updates the given RNDIS Host instance's
- * state values and configures the pipes required to communicate with the interface if it is found within the device.
- * This should be called once after the stack has enumerated the attached device, while the host state machine is in
- * the Addressed state.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state.
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
- * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor.
- *
- * \return A value from the \ref RNDIS_Host_EnumerationFailure_ErrorCodes_t enum.
- */
- uint8_t RNDIS_Host_ConfigurePipes(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Sends a RNDIS KEEPALIVE command to the device, to ensure that it does not enter standby mode after periods
- * of long inactivity.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum or \ref RNDIS_ERROR_LOGICAL_CMD_FAILED if the device returned a
- * logical command failure.
- */
- uint8_t RNDIS_Host_SendKeepAlive(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Initializes the attached RNDIS device's RNDIS interface. This should be called after the device's pipes have been
- * configured via the call to \ref RNDIS_Host_ConfigurePipes().
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum or \ref RNDIS_ERROR_LOGICAL_CMD_FAILED if the
- * device returned a logical command failure.
- */
- uint8_t RNDIS_Host_InitializeDevice(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sets a given RNDIS property of an attached RNDIS device.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state.
- * \param[in] Oid OID number of the parameter to set.
- * \param[in] Buffer Pointer to where the property data is to be sourced from.
- * \param[in] Length Length in bytes of the property data to sent to the device.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum or \ref RNDIS_ERROR_LOGICAL_CMD_FAILED if the
- * device returned a logical command failure.
- */
- uint8_t RNDIS_Host_SetRNDISProperty(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- const uint32_t Oid,
- void* Buffer,
- const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Gets a given RNDIS property of an attached RNDIS device.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state.
- * \param[in] Oid OID number of the parameter to get.
- * \param[in] Buffer Pointer to where the property data is to be written to.
- * \param[in] MaxLength Length in bytes of the destination buffer size.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum or \ref RNDIS_ERROR_LOGICAL_CMD_FAILED if the
- * device returned a logical command failure.
- */
- uint8_t RNDIS_Host_QueryRNDISProperty(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- const uint32_t Oid,
- void* Buffer,
- const uint16_t MaxLength) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Determines if a packet is currently waiting for the host to read in and process.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state.
- *
- * \return Boolean \c true if a packet is waiting to be read in by the host, \c false otherwise.
- */
- bool RNDIS_Host_IsPacketReceived(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Retrieves the next pending packet from the device, discarding the remainder of the RNDIS packet header to leave
- * only the packet contents for processing by the host in the nominated buffer.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state.
- * \param[out] Buffer Pointer to a buffer where the packer data is to be written to.
- * \param[out] PacketLength Pointer to where the length in bytes of the read packet is to be stored.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t RNDIS_Host_ReadPacket(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- void* Buffer,
- uint16_t* const PacketLength) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2)
- ATTR_NON_NULL_PTR_ARG(3);
-
- /** Sends the given packet to the attached RNDIS device, after adding a RNDIS packet message header.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state.
- * \param[in] Buffer Pointer to a buffer where the packer data is to be read from.
- * \param[in] PacketLength Length in bytes of the packet to send.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t RNDIS_Host_SendPacket(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- void* Buffer,
- const uint16_t PacketLength) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /* Inline Functions: */
- /** General management task for a given RNDIS host class interface, required for the correct operation of the interface. This should
- * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask().
- *
- * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing an RNDIS Class host configuration and state.
- */
- static inline void RNDIS_Host_USBTask(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void RNDIS_Host_USBTask(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo)
- {
- (void)RNDISInterfaceInfo;
- }
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_RNDIS_HOST_C)
- static uint8_t RNDIS_SendEncapsulatedCommand(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- void* Buffer,
- const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(2);
- static uint8_t RNDIS_GetEncapsulatedResponse(USB_ClassInfo_RNDIS_Host_t* const RNDISInterfaceInfo,
- void* Buffer,
- const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(2);
-
- static uint8_t DCOMP_RNDIS_Host_NextRNDISControlInterface(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_RNDIS_Host_NextRNDISDataInterface(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_RNDIS_Host_NextRNDISInterfaceEndpoint(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c deleted file mode 100644 index a6137b191..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/StillImageClassHost.c +++ /dev/null @@ -1,436 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../../Core/USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_SI_DRIVER
-#define __INCLUDE_FROM_STILLIMAGE_HOST_C
-#include "StillImageClassHost.h"
-
-uint8_t SI_Host_ConfigurePipes(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData)
-{
- USB_Descriptor_Endpoint_t* DataINEndpoint = NULL;
- USB_Descriptor_Endpoint_t* DataOUTEndpoint = NULL;
- USB_Descriptor_Endpoint_t* EventsEndpoint = NULL;
- USB_Descriptor_Interface_t* StillImageInterface = NULL;
-
- memset(&SIInterfaceInfo->State, 0x00, sizeof(SIInterfaceInfo->State));
-
- if (DESCRIPTOR_TYPE(ConfigDescriptorData) != DTYPE_Configuration)
- return SI_ENUMERROR_InvalidConfigDescriptor;
-
- while (!(DataINEndpoint) || !(DataOUTEndpoint) || !(EventsEndpoint))
- {
- if (!(StillImageInterface) ||
- USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_SI_Host_NextSIInterfaceEndpoint) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- if (USB_GetNextDescriptorComp(&ConfigDescriptorSize, &ConfigDescriptorData,
- DCOMP_SI_Host_NextSIInterface) != DESCRIPTOR_SEARCH_COMP_Found)
- {
- return SI_ENUMERROR_NoCompatibleInterfaceFound;
- }
-
- StillImageInterface = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Interface_t);
-
- DataINEndpoint = NULL;
- DataOUTEndpoint = NULL;
- EventsEndpoint = NULL;
-
- continue;
- }
-
- USB_Descriptor_Endpoint_t* EndpointData = DESCRIPTOR_PCAST(ConfigDescriptorData, USB_Descriptor_Endpoint_t);
-
- if ((EndpointData->EndpointAddress & ENDPOINT_DIR_MASK) == ENDPOINT_DIR_IN)
- {
- if ((EndpointData->Attributes & EP_TYPE_MASK) == EP_TYPE_INTERRUPT)
- EventsEndpoint = EndpointData;
- else
- DataINEndpoint = EndpointData;
- }
- else
- {
- DataOUTEndpoint = EndpointData;
- }
- }
-
- SIInterfaceInfo->Config.DataINPipe.Size = le16_to_cpu(DataINEndpoint->EndpointSize);
- SIInterfaceInfo->Config.DataINPipe.EndpointAddress = DataINEndpoint->EndpointAddress;
- SIInterfaceInfo->Config.DataINPipe.Type = EP_TYPE_BULK;
-
- SIInterfaceInfo->Config.DataOUTPipe.Size = le16_to_cpu(DataOUTEndpoint->EndpointSize);
- SIInterfaceInfo->Config.DataOUTPipe.EndpointAddress = DataOUTEndpoint->EndpointAddress;
- SIInterfaceInfo->Config.DataOUTPipe.Type = EP_TYPE_BULK;
-
- SIInterfaceInfo->Config.EventsPipe.Size = le16_to_cpu(EventsEndpoint->EndpointSize);
- SIInterfaceInfo->Config.EventsPipe.EndpointAddress = EventsEndpoint->EndpointAddress;
- SIInterfaceInfo->Config.EventsPipe.Type = EP_TYPE_INTERRUPT;
-
- if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.DataINPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.DataOUTPipe, 1)))
- return false;
-
- if (!(Pipe_ConfigurePipeTable(&SIInterfaceInfo->Config.EventsPipe, 1)))
- return false;
-
- SIInterfaceInfo->State.InterfaceNumber = StillImageInterface->InterfaceNumber;
- SIInterfaceInfo->State.IsActive = true;
-
- return SI_ENUMERROR_NoError;
-}
-
-uint8_t DCOMP_SI_Host_NextSIInterface(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Interface)
- {
- USB_Descriptor_Interface_t* Interface = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Interface_t);
-
- if ((Interface->Class == SI_CSCP_StillImageClass) &&
- (Interface->SubClass == SI_CSCP_StillImageSubclass) &&
- (Interface->Protocol == SI_CSCP_BulkOnlyProtocol))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-uint8_t DCOMP_SI_Host_NextSIInterfaceEndpoint(void* const CurrentDescriptor)
-{
- USB_Descriptor_Header_t* Header = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Header_t);
-
- if (Header->Type == DTYPE_Endpoint)
- {
- USB_Descriptor_Endpoint_t* Endpoint = DESCRIPTOR_PCAST(CurrentDescriptor, USB_Descriptor_Endpoint_t);
-
- uint8_t EndpointType = (Endpoint->Attributes & EP_TYPE_MASK);
-
- if (((EndpointType == EP_TYPE_BULK) || (EndpointType == EP_TYPE_INTERRUPT)) &&
- (!(Pipe_IsEndpointBound(Endpoint->EndpointAddress))))
- {
- return DESCRIPTOR_SEARCH_Found;
- }
- }
- else if (Header->Type == DTYPE_Interface)
- {
- return DESCRIPTOR_SEARCH_Fail;
- }
-
- return DESCRIPTOR_SEARCH_NotFound;
-}
-
-uint8_t SI_Host_SendBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- PIMA_Container_t* const PIMAHeader)
-{
- uint8_t ErrorCode;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- if (SIInterfaceInfo->State.IsSessionOpen)
- PIMAHeader->TransactionID = cpu_to_le32(SIInterfaceInfo->State.TransactionID++);
-
- Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if ((ErrorCode = Pipe_Write_Stream_LE(PIMAHeader, PIMA_COMMAND_SIZE(0), NULL)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- uint8_t ParamBytes = (PIMAHeader->DataLength - PIMA_COMMAND_SIZE(0));
-
- if (ParamBytes)
- {
- if ((ErrorCode = Pipe_Write_Stream_LE(&PIMAHeader->Params, ParamBytes, NULL)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
- }
-
- Pipe_ClearOUT();
- Pipe_Freeze();
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t SI_Host_ReceiveBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- PIMA_Container_t* const PIMAHeader)
-{
- uint16_t TimeoutMSRem = SI_COMMAND_DATA_TIMEOUT_MS;
- uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber();
-
- if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- while (!(Pipe_IsINReceived()))
- {
- uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber();
-
- if (CurrentFrameNumber != PreviousFrameNumber)
- {
- PreviousFrameNumber = CurrentFrameNumber;
-
- if (!(TimeoutMSRem--))
- return PIPE_RWSTREAM_Timeout;
- }
-
- Pipe_Freeze();
- Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsStalled())
- {
- USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
- return PIPE_RWSTREAM_PipeStalled;
- }
-
- Pipe_Freeze();
- Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_IsStalled())
- {
- USB_Host_ClearEndpointStall(Pipe_GetBoundEndpointAddress());
- return PIPE_RWSTREAM_PipeStalled;
- }
-
- if (USB_HostState == HOST_STATE_Unattached)
- return PIPE_RWSTREAM_DeviceDisconnected;
- }
-
- Pipe_Read_Stream_LE(PIMAHeader, PIMA_COMMAND_SIZE(0), NULL);
-
- if (PIMAHeader->Type == CPU_TO_LE16(PIMA_CONTAINER_ResponseBlock))
- {
- uint8_t ParamBytes = (PIMAHeader->DataLength - PIMA_COMMAND_SIZE(0));
-
- if (ParamBytes)
- Pipe_Read_Stream_LE(&PIMAHeader->Params, ParamBytes, NULL);
-
- Pipe_ClearIN();
- }
-
- Pipe_Freeze();
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t SI_Host_SendData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- void* Buffer,
- const uint16_t Bytes)
-{
- uint8_t ErrorCode;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- Pipe_SelectPipe(SIInterfaceInfo->Config.DataOUTPipe.Address);
- Pipe_Unfreeze();
-
- ErrorCode = Pipe_Write_Stream_LE(Buffer, Bytes, NULL);
-
- Pipe_ClearOUT();
- Pipe_Freeze();
-
- return ErrorCode;
-}
-
-uint8_t SI_Host_ReadData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- void* Buffer,
- const uint16_t Bytes)
-{
- uint8_t ErrorCode;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- Pipe_SelectPipe(SIInterfaceInfo->Config.DataINPipe.Address);
- Pipe_Unfreeze();
-
- ErrorCode = Pipe_Read_Stream_LE(Buffer, Bytes, NULL);
-
- Pipe_Freeze();
-
- return ErrorCode;
-}
-
-bool SI_Host_IsEventReceived(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo)
-{
- bool IsEventReceived = false;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
- return false;
-
- Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipe.Address);
- Pipe_Unfreeze();
-
- if (Pipe_BytesInPipe())
- IsEventReceived = true;
-
- Pipe_Freeze();
-
- return IsEventReceived;
-}
-
-uint8_t SI_Host_ReceiveEventHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- PIMA_Container_t* const PIMAHeader)
-{
- uint8_t ErrorCode;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- Pipe_SelectPipe(SIInterfaceInfo->Config.EventsPipe.Address);
- Pipe_Unfreeze();
-
- ErrorCode = Pipe_Read_Stream_LE(PIMAHeader, sizeof(PIMA_Container_t), NULL);
-
- Pipe_ClearIN();
- Pipe_Freeze();
-
- return ErrorCode;
-}
-
-uint8_t SI_Host_OpenSession(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- SIInterfaceInfo->State.TransactionID = 0;
- SIInterfaceInfo->State.IsSessionOpen = false;
-
- PIMA_Container_t PIMABlock = (PIMA_Container_t)
- {
- .DataLength = CPU_TO_LE32(PIMA_COMMAND_SIZE(1)),
- .Type = CPU_TO_LE16(PIMA_CONTAINER_CommandBlock),
- .Code = CPU_TO_LE16(0x1002),
- .Params = {CPU_TO_LE32(1)},
- };
-
- if ((ErrorCode = SI_Host_SendBlockHeader(SIInterfaceInfo, &PIMABlock)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- if ((ErrorCode = SI_Host_ReceiveBlockHeader(SIInterfaceInfo, &PIMABlock)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- if ((PIMABlock.Type != CPU_TO_LE16(PIMA_CONTAINER_ResponseBlock)) || (PIMABlock.Code != CPU_TO_LE16(0x2001)))
- return SI_ERROR_LOGICAL_CMD_FAILED;
-
- SIInterfaceInfo->State.IsSessionOpen = true;
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t SI_Host_CloseSession(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- PIMA_Container_t PIMABlock = (PIMA_Container_t)
- {
- .DataLength = CPU_TO_LE32(PIMA_COMMAND_SIZE(1)),
- .Type = CPU_TO_LE16(PIMA_CONTAINER_CommandBlock),
- .Code = CPU_TO_LE16(0x1003),
- .Params = {CPU_TO_LE32(1)},
- };
-
- if ((ErrorCode = SI_Host_SendBlockHeader(SIInterfaceInfo, &PIMABlock)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- if ((ErrorCode = SI_Host_ReceiveBlockHeader(SIInterfaceInfo, &PIMABlock)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- SIInterfaceInfo->State.IsSessionOpen = false;
-
- if ((PIMABlock.Type != CPU_TO_LE16(PIMA_CONTAINER_ResponseBlock)) || (PIMABlock.Code != CPU_TO_LE16(0x2001)))
- return SI_ERROR_LOGICAL_CMD_FAILED;
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t SI_Host_SendCommand(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- const uint16_t Operation,
- const uint8_t TotalParams,
- uint32_t* const Params)
-{
- if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- uint8_t ErrorCode;
-
- PIMA_Container_t PIMABlock = (PIMA_Container_t)
- {
- .DataLength = cpu_to_le32(PIMA_COMMAND_SIZE(TotalParams)),
- .Type = CPU_TO_LE16(PIMA_CONTAINER_CommandBlock),
- .Code = cpu_to_le16(Operation),
- };
-
- memcpy(&PIMABlock.Params, Params, sizeof(uint32_t) * TotalParams);
-
- if ((ErrorCode = SI_Host_SendBlockHeader(SIInterfaceInfo, &PIMABlock)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t SI_Host_ReceiveResponse(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo)
-{
- uint8_t ErrorCode;
- PIMA_Container_t PIMABlock;
-
- if ((USB_HostState != HOST_STATE_Configured) || !(SIInterfaceInfo->State.IsActive))
- return PIPE_RWSTREAM_DeviceDisconnected;
-
- if ((ErrorCode = SI_Host_ReceiveBlockHeader(SIInterfaceInfo, &PIMABlock)) != PIPE_RWSTREAM_NoError)
- return ErrorCode;
-
- if ((PIMABlock.Type != CPU_TO_LE16(PIMA_CONTAINER_ResponseBlock)) || (PIMABlock.Code != CPU_TO_LE16(0x2001)))
- return SI_ERROR_LOGICAL_CMD_FAILED;
-
- return PIPE_RWSTREAM_NoError;
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h deleted file mode 100644 index acfbd7d61..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/Host/StillImageClassHost.h +++ /dev/null @@ -1,317 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Host mode driver for the library USB Still Image Class driver.
- *
- * Host mode driver for the library USB Still Image Class driver.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB module driver
- * dispatch header located in LUFA/Drivers/USB.h.
- */
-
-/** \ingroup Group_USBClassSI
- * \defgroup Group_USBClassStillImageHost Still Image Class Host Mode Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/StillImageClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Host Mode USB Class driver framework interface, for the Still Image USB Class driver.
- *
- * @{
- */
-
-#ifndef __SI_CLASS_HOST_H__
-#define __SI_CLASS_HOST_H__
-
- /* Includes: */
- #include "../../USB.h"
- #include "../Common/StillImageClassCommon.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_SI_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Error code for some Still Image Host functions, indicating a logical (and not hardware) error. */
- #define SI_ERROR_LOGICAL_CMD_FAILED 0x80
-
- /* Type Defines: */
- /** \brief Still Image Class Host Mode Configuration and State Structure.
- *
- * Class state structure. An instance of this structure should be made within the user application,
- * and passed to each of the Still Image class driver functions as the \c SIInterfaceInfo parameter. This
- * stores each Still Image interface's configuration and state information.
- */
- typedef struct
- {
- struct
- {
- USB_Pipe_Table_t DataINPipe; /**< Data IN Pipe configuration table. */
- USB_Pipe_Table_t DataOUTPipe; /**< Data OUT Pipe configuration table. */
- USB_Pipe_Table_t EventsPipe; /**< Event notification IN Pipe configuration table. */
- } Config; /**< Config data for the USB class interface within the device. All elements in this section
- * <b>must</b> be set or the interface will fail to enumerate and operate correctly.
- */
- struct
- {
- bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
- * after \ref SI_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state.
- */
- uint8_t InterfaceNumber; /**< Interface index of the Still Image interface within the attached device. */
-
- bool IsSessionOpen; /**< Indicates if a PIMA session is currently open with the attached device. */
- uint32_t TransactionID; /**< Transaction ID for the next transaction to send to the device. */
- } State; /**< State data for the USB class interface within the device. All elements in this section
- * <b>may</b> be set to initial values, but may also be ignored to default to sane values when
- * the interface is enumerated.
- */
- } USB_ClassInfo_SI_Host_t;
-
- /* Enums: */
- /** Enum for the possible error codes returned by the \ref SI_Host_ConfigurePipes() function. */
- enum SI_Host_EnumerationFailure_ErrorCodes_t
- {
- SI_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
- SI_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
- SI_ENUMERROR_NoCompatibleInterfaceFound = 2, /**< A compatible Still Image interface was not found in the device's
- * Configuration Descriptor.
- */
- SI_ENUMERROR_PipeConfigurationFailed = 3, /**< One or more pipes for the specified interface could not be configured correctly. */
- };
-
- /* Function Prototypes: */
- /** Host interface configuration routine, to configure a given Still Image host interface instance using the
- * Configuration Descriptor read from an attached USB device. This function automatically updates the given Still
- * Image Host instance's state values and configures the pipes required to communicate with the interface if it is
- * found within the device. This should be called once after the stack has enumerated the attached device, while
- * the host state machine is in the Addressed state.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
- * \param[in] ConfigDescriptorData Pointer to a buffer containing the attached device's Configuration Descriptor.
- *
- * \return A value from the \ref SI_Host_EnumerationFailure_ErrorCodes_t enum.
- */
- uint8_t SI_Host_ConfigurePipes(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- uint16_t ConfigDescriptorSize,
- void* ConfigDescriptorData) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Opens a new PIMA session with the attached device. This should be used before any session-orientated PIMA commands
- * are issued to the device. Only one session can be open at the one time.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device
- * returned a logical command failure.
- */
- uint8_t SI_Host_OpenSession(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Closes an already opened PIMA session with the attached device. This should be used after all session-orientated
- * PIMA commands have been issued to the device.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device
- * returned a logical command failure.
- */
- uint8_t SI_Host_CloseSession(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a raw PIMA block header to the device, filling out the transaction ID automatically. This can be used to send
- * arbitrary PIMA blocks to the device with or without parameters.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- * \param[in] PIMAHeader Pointer to a PIMA container structure that is to be sent.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t SI_Host_SendBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- PIMA_Container_t* const PIMAHeader) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(2);
-
- /** Receives a raw PIMA block header from the device. This can be used to receive arbitrary PIMA blocks from the device with
- * or without parameters.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- * \param[out] PIMAHeader Pointer to a PIMA container structure where the received block is to be stored.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t SI_Host_ReceiveBlockHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- PIMA_Container_t* const PIMAHeader) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(2);
-
- /** Sends a given PIMA command to the attached device, filling out the PIMA command header's Transaction ID automatically.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- * \param[in] Operation PIMA operation code to issue to the device.
- * \param[in] TotalParams Total number of 32-bit parameters to send to the device in the issued command block.
- * \param[in] Params Pointer to an array of 32-bit values containing the parameters to send in the command block.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device
- * returned a logical command failure.
- */
- uint8_t SI_Host_SendCommand(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- const uint16_t Operation,
- const uint8_t TotalParams,
- uint32_t* const Params) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Receives and checks a response block from the attached Still Image device, once a command has been issued and all data
- * associated with the command has been transferred.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device
- * returned a logical command failure.
- */
- uint8_t SI_Host_ReceiveResponse(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Indicates if the device has issued a PIMA event block to the host via the asynchronous events pipe.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- *
- * \return Boolean \c true if an event is waiting to be read, \c false otherwise.
- */
- bool SI_Host_IsEventReceived(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Receives an asynchronous event block from the device via the asynchronous events pipe.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- * \param[out] PIMAHeader Pointer to a PIMA container structure where the event should be stored.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum, or \ref SI_ERROR_LOGICAL_CMD_FAILED if the device
- * returned a logical command failure.
- */
- uint8_t SI_Host_ReceiveEventHeader(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- PIMA_Container_t* const PIMAHeader) ATTR_NON_NULL_PTR_ARG(1)
- ATTR_NON_NULL_PTR_ARG(2);
-
- /** Sends arbitrary data to the attached device, for use in the data phase of PIMA commands which require data
- * transfer beyond the regular PIMA command block parameters.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- * \param[in] Buffer Pointer to a buffer where the data to send has been stored.
- * \param[in] Bytes Length in bytes of the data in the buffer to send to the attached device.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t SI_Host_SendData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- void* Buffer,
- const uint16_t Bytes) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Receives arbitrary data from the attached device, for use in the data phase of PIMA commands which require data
- * transfer beyond the regular PIMA command block parameters.
- *
- * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
- * call will fail.
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- * \param[out] Buffer Pointer to a buffer where the received data is to be stored.
- * \param[in] Bytes Length in bytes of the data to read.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t SI_Host_ReadData(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo,
- void* Buffer,
- const uint16_t Bytes) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /* Inline Functions: */
- /** General management task for a given Still Image host class interface, required for the correct operation of the
- * interface. This should be called frequently in the main program loop, before the master USB management task
- * \ref USB_USBTask().
- *
- * \param[in,out] SIInterfaceInfo Pointer to a structure containing a Still Image Class host configuration and state.
- */
- static inline void SI_Host_USBTask(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1) ATTR_ALWAYS_INLINE;
- static inline void SI_Host_USBTask(USB_ClassInfo_SI_Host_t* const SIInterfaceInfo)
- {
- (void)SIInterfaceInfo;
- }
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define SI_COMMAND_DATA_TIMEOUT_MS 10000
-
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_STILLIMAGE_HOST_C)
- static uint8_t DCOMP_SI_Host_NextSIInterface(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_SI_Host_NextSIInterfaceEndpoint(void* const CurrentDescriptor)
- ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/MIDIClass.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/MIDIClass.h deleted file mode 100644 index e3b8e2f5e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/MIDIClass.h +++ /dev/null @@ -1,83 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the library USB MIDI Class driver.
- *
- * Master include file for the library USB MIDI Class driver, for both host and device modes, where available.
- *
- * This file should be included in all user projects making use of this optional class driver, instead of
- * including any headers in the USB/ClassDriver/Device, USB/ClassDriver/Host or USB/ClassDriver/Common subdirectories.
- */
-
-/** \ingroup Group_USBClassDrivers
- * \defgroup Group_USBClassMIDI MIDI Class Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/MIDIClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- * - LUFA/Drivers/USB/Class/Host/MIDIClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * MIDI Class Driver module. This module contains an internal implementation of the USB MIDI Class, for both Device
- * and Host USB modes. User applications can use this class driver instead of implementing the MIDI class manually
- * via the low-level LUFA APIs.
- *
- * This module is designed to simplify the user code by exposing only the required interface needed to interface with
- * Hosts or Devices using the USB MIDI Class.
- *
- * \note The USB MIDI class is actually a special case of the regular Audio class, thus this module depends on
- * structure definitions from the \ref Group_USBClassAudioDevice class driver module.
- *
- * @{
- */
-
-#ifndef _MIDI_CLASS_H_
-#define _MIDI_CLASS_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_USB_DRIVER
- #define __INCLUDE_FROM_MIDI_DRIVER
-
- /* Includes: */
- #include "../Core/USBMode.h"
-
- #if defined(USB_CAN_BE_DEVICE)
- #include "Device/MIDIClassDevice.h"
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- #include "Host/MIDIClassHost.h"
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/MassStorageClass.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/MassStorageClass.h deleted file mode 100644 index a5af1496b..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/MassStorageClass.h +++ /dev/null @@ -1,80 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the library USB Mass Storage Class driver.
- *
- * Master include file for the library USB Mass Storage Class driver, for both host and device modes, where available.
- *
- * This file should be included in all user projects making use of this optional class driver, instead of
- * including any headers in the USB/ClassDriver/Device, USB/ClassDriver/Host or USB/ClassDriver/Common subdirectories.
- */
-
-/** \ingroup Group_USBClassDrivers
- * \defgroup Group_USBClassMS Mass Storage Class Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/MassStorageClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- * - LUFA/Drivers/USB/Class/Host/MassStorageClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Mass Storage Class Driver module. This module contains an internal implementation of the USB Mass Storage Class, for both
- * Device and Host USB modes. User applications can use this class driver instead of implementing the Mass Storage class
- * manually via the low-level LUFA APIs.
- *
- * This module is designed to simplify the user code by exposing only the required interface needed to interface with
- * Hosts or Devices using the USB Mass Storage Class.
- *
- * @{
- */
-
-#ifndef _MS_CLASS_H_
-#define _MS_CLASS_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_USB_DRIVER
- #define __INCLUDE_FROM_MS_DRIVER
-
- /* Includes: */
- #include "../Core/USBMode.h"
-
- #if defined(USB_CAN_BE_DEVICE)
- #include "Device/MassStorageClassDevice.h"
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- #include "Host/MassStorageClassHost.h"
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/PrinterClass.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/PrinterClass.h deleted file mode 100644 index 181d6931e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/PrinterClass.h +++ /dev/null @@ -1,77 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the library USB Printer Class driver.
- *
- * Master include file for the library USB Printer Class driver, for both host and device modes, where available.
- *
- * This file should be included in all user projects making use of this optional class driver, instead of
- * including any headers in the USB/ClassDriver/Device, USB/ClassDriver/Host or USB/ClassDriver/Common subdirectories.
- */
-
-/** \ingroup Group_USBClassDrivers
- * \defgroup Group_USBClassPrinter Printer Class Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/PrinterClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Printer Class Driver module. This module contains an internal implementation of the USB Printer Class, for the base
- * USB Printer transport layer for USB Host mode only. Note that printers are free to implement whatever printer language
- * they choose on top of this (e.g. Postscript), and so this driver exposes low level data transport functions only rather
- * than high level raster or text functions. User applications can use this class driver instead of implementing the Printer
- * class manually via the low-level LUFA APIs.
- *
- * This module is designed to simplify the user code by exposing only the required interface needed to interface with
- * Devices using the USB Printer Class.
- *
- * @{
- */
-
-#ifndef _PRINTER_CLASS_H_
-#define _PRINTER_CLASS_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_USB_DRIVER
- #define __INCLUDE_FROM_PRINTER_DRIVER
-
- /* Includes: */
- #include "../Core/USBMode.h"
-
- #if defined(USB_CAN_BE_HOST)
- #include "Host/PrinterClassHost.h"
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/RNDISClass.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/RNDISClass.h deleted file mode 100644 index e270629e2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/RNDISClass.h +++ /dev/null @@ -1,80 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the library USB RNDIS Class driver.
- *
- * Master include file for the library USB RNDIS Class driver, for both host and device modes, where available.
- *
- * This file should be included in all user projects making use of this optional class driver, instead of
- * including any headers in the USB/ClassDriver/Device, USB/ClassDriver/Host or USB/ClassDriver/Common subdirectories.
- */
-
-/** \ingroup Group_USBClassDrivers
- * \defgroup Group_USBClassRNDIS RNDIS (Networking) Class Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Device/RNDISClassDevice.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- * - LUFA/Drivers/USB/Class/Host/RNDISClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * RNDIS Class Driver module. This module contains an internal implementation of the Microsoft USB RNDIS Networking
- * Class, for both Device and Host USB modes. User applications can use this class driver instead of implementing the
- * RNDIS class manually via the low-level LUFA APIs.
- *
- * This module is designed to simplify the user code by exposing only the required interface needed to interface with
- * Hosts using the USB RNDIS Class.
- *
- * @{
- */
-
-#ifndef _RNDIS_CLASS_H_
-#define _RNDIS_CLASS_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_USB_DRIVER
- #define __INCLUDE_FROM_RNDIS_DRIVER
-
- /* Includes: */
- #include "../Core/USBMode.h"
-
- #if defined(USB_CAN_BE_DEVICE)
- #include "Device/RNDISClassDevice.h"
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- #include "Host/RNDISClassHost.h"
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/StillImageClass.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/StillImageClass.h deleted file mode 100644 index e8c28b441..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Class/StillImageClass.h +++ /dev/null @@ -1,75 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the library USB Still Image Class driver.
- *
- * Master include file for the library USB Still Image Class driver, for both host and device modes, where available.
- *
- * This file should be included in all user projects making use of this optional class driver, instead of
- * including any headers in the USB/ClassDriver/Device, USB/ClassDriver/Host or USB/ClassDriver/Common subdirectories.
- */
-
-/** \ingroup Group_USBClassDrivers
- * \defgroup Group_USBClassSI Still Image Class Driver
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/StillImageClassHost.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
- *
- * \section Sec_ModDescription Module Description
- * Still Image Class Driver module. This module contains an internal implementation of the USB Still Image Class,
- * for USB Host mode only. User applications can use this class driver instead of implementing the Still Image class
- * manually via the low-level LUFA APIs.
- *
- * This module is designed to simplify the user code by exposing only the required interface needed to interface with
- * Devices using the USB Still Image Class.
- *
- * @{
- */
-
-#ifndef _SI_CLASS_H_
-#define _SI_CLASS_H_
-
- /* Macros: */
- #define __INCLUDE_FROM_USB_DRIVER
- #define __INCLUDE_FROM_SI_DRIVER
-
- /* Includes: */
- #include "../Core/USBMode.h"
-
- #if defined(USB_CAN_BE_HOST)
- #include "Host/StillImageClassHost.h"
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c deleted file mode 100644 index 09d6f3775..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.c +++ /dev/null @@ -1,57 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_AVR8)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#include "../Device.h"
-
-void USB_Device_SendRemoteWakeup(void)
-{
- if (!(USB_Options & USB_OPT_MANUAL_PLL))
- {
- USB_PLL_On();
- while (!(USB_PLL_IsReady()));
- }
-
- USB_CLK_Unfreeze();
-
- UDCON |= (1 << RMWKUP);
- while (UDCON & (1 << RMWKUP));
-}
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h deleted file mode 100644 index 318ff8720..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h +++ /dev/null @@ -1,264 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Device definitions for the AVR8 microcontrollers.
- * \copydetails Group_Device_AVR8
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_Device
- * \defgroup Group_Device_AVR8 Device Management (AVR8)
- * \brief USB Device definitions for the AVR8 microcontrollers.
- *
- * Architecture specific USB Device definitions for the Atmel 8-bit AVR microcontrollers.
- *
- * @{
- */
-
-#ifndef __USBDEVICE_AVR8_H__
-#define __USBDEVICE_AVR8_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBController.h"
- #include "../StdDescriptors.h"
- #include "../USBInterrupt.h"
- #include "../Endpoint.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- #if (defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS))
- #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive.
- #endif
-
- #if (defined(USE_FLASH_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS))
- #error USE_FLASH_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive.
- #endif
-
- #if (defined(USE_FLASH_DESCRIPTORS) && defined(USE_RAM_DESCRIPTORS))
- #error USE_FLASH_DESCRIPTORS and USE_RAM_DESCRIPTORS are mutually exclusive.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name USB Device Mode Option Masks */
- //@{
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)
- /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
- * USB interface should be initialized in low speed (1.5Mb/s) mode.
- *
- * \note Low Speed mode is not available on all USB AVR models.
- * \n
- *
- * \note Restrictions apply on the number, size and type of endpoints which can be used
- * when running in low speed mode - please refer to the USB 2.0 specification.
- */
- #define USB_DEVICE_OPT_LOWSPEED (1 << 0)
- #endif
-
- /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
- * USB interface should be initialized in full speed (12Mb/s) mode.
- */
- #define USB_DEVICE_OPT_FULLSPEED (0 << 0)
- //@}
-
- #if (!defined(NO_INTERNAL_SERIAL) && \
- (defined(USB_SERIES_7_AVR) || defined(USB_SERIES_6_AVR) || \
- defined(USB_SERIES_4_AVR) || defined(USB_SERIES_2_AVR) || \
- defined(__DOXYGEN__)))
- /** String descriptor index for the device's unique serial number string descriptor within the device.
- * This unique serial number is used by the host to associate resources to the device (such as drivers or COM port
- * number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain
- * a unique serial number internally, and setting the device descriptors serial number string index to this value
- * will cause it to use the internal serial number.
- *
- * On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR and so will force the host to create a pseudo-serial
- * number for the device.
- */
- #define USE_INTERNAL_SERIAL 0xDC
-
- /** Length of the device's unique internal serial number, in bits, if present on the selected microcontroller
- * model.
- */
- #define INTERNAL_SERIAL_LENGTH_BITS 80
-
- /** Start address of the internal serial number, in the appropriate address space, if present on the selected microcontroller
- * model.
- */
- #define INTERNAL_SERIAL_START_ADDRESS 0x0E
- #else
- #define USE_INTERNAL_SERIAL NO_DESCRIPTOR
-
- #define INTERNAL_SERIAL_LENGTH_BITS 0
- #define INTERNAL_SERIAL_START_ADDRESS 0
- #endif
-
- /* Function Prototypes: */
- /** Sends a Remote Wakeup request to the host. This signals to the host that the device should
- * be taken out of suspended mode, and communications should resume.
- *
- * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the
- * host computer when the host has suspended all USB devices to enter a low power state.
- *
- * \attention This function should only be used if the device has indicated to the host that it
- * supports the Remote Wakeup feature in the device descriptors, and should only be
- * issued if the host is currently allowing remote wakeup events from the device (i.e.,
- * the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP
- * compile time option is used, this function is unavailable.
- * \n\n
- *
- * \attention The USB clock must be running for this function to operate. If the stack is initialized with
- * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running
- * before attempting to call this function.
- *
- * \see \ref Group_StdDescriptors for more information on the RMWAKEUP feature and device descriptors.
- */
- void USB_Device_SendRemoteWakeup(void);
-
- /* Inline Functions: */
- /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host)
- * the frame number is incremented by one.
- *
- * \return Current USB frame number from the USB controller.
- */
- static inline uint16_t USB_Device_GetFrameNumber(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint16_t USB_Device_GetFrameNumber(void)
- {
- return UDFNUM;
- }
-
- #if !defined(NO_SOF_EVENTS)
- /** Enables the device mode Start Of Frame events. When enabled, this causes the
- * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
- * at the start of each USB frame when enumerated in device mode.
- *
- * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
- */
- static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_EnableSOFEvents(void)
- {
- USB_INT_Enable(USB_INT_SOFI);
- }
-
- /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
- * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
- *
- * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
- */
- static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_DisableSOFEvents(void)
- {
- USB_INT_Disable(USB_INT_SOFI);
- }
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Inline Functions: */
- #if defined(USB_DEVICE_OPT_LOWSPEED)
- static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_SetLowSpeed(void)
- {
- UDCON |= (1 << LSM);
- }
-
- static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_SetFullSpeed(void)
- {
- UDCON &= ~(1 << LSM);
- }
- #endif
-
- static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_SetDeviceAddress(const uint8_t Address)
- {
- uint8_t Temp = (UDADDR & (1 << ADDEN)) | (Address & 0x7F);
-
- UDADDR = Temp;
- UDADDR = Temp | (1 << ADDEN);
- }
-
- static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline bool USB_Device_IsAddressSet(void)
- {
- return (UDADDR & (1 << ADDEN));
- }
-
- #if (USE_INTERNAL_SERIAL != NO_DESCRIPTOR)
- static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) ATTR_NON_NULL_PTR_ARG(1);
- static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString)
- {
- uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
- GlobalInterruptDisable();
-
- uint8_t SigReadAddress = INTERNAL_SERIAL_START_ADDRESS;
-
- for (uint8_t SerialCharNum = 0; SerialCharNum < (INTERNAL_SERIAL_LENGTH_BITS / 4); SerialCharNum++)
- {
- uint8_t SerialByte = boot_signature_byte_get(SigReadAddress);
-
- if (SerialCharNum & 0x01)
- {
- SerialByte >>= 4;
- SigReadAddress++;
- }
-
- SerialByte &= 0x0F;
-
- UnicodeString[SerialCharNum] = cpu_to_le16((SerialByte >= 10) ?
- (('A' - 10) + SerialByte) : ('0' + SerialByte));
- }
-
- SetGlobalInterruptMask(CurrentGlobalInt);
- }
- #endif
-
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c deleted file mode 100644 index 7563ed35a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c +++ /dev/null @@ -1,275 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_AVR8)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#include "EndpointStream_AVR8.h"
-
-#if !defined(CONTROL_ONLY_DEVICE)
-uint8_t Endpoint_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t ErrorCode;
- uint16_t BytesInTransfer = 0;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- Length -= *BytesProcessed;
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearOUT();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return ENDPOINT_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Endpoint_Discard_8();
-
- Length--;
- BytesInTransfer++;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-uint8_t Endpoint_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t ErrorCode;
- uint16_t BytesInTransfer = 0;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- Length -= *BytesProcessed;
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearIN();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return ENDPOINT_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Endpoint_Write_8(0);
-
- Length--;
- BytesInTransfer++;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations,
- * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_RW.c"
-
-#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE)
- #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-#endif
-
-#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE)
- #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE
- #define TEMPLATE_BUFFER_TYPE void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8())
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE
- #define TEMPLATE_BUFFER_TYPE void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8())
- #include "Template/Template_Endpoint_RW.c"
-#endif
-
-#endif
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_Control_W.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_Control_W.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_Control_R.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_Control_R.c"
-
-#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE)
- #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_Control_W.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_Control_W.c"
-#endif
-
-#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE)
- #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_Control_W.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_Control_W.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8())
- #include "Template/Template_Endpoint_Control_R.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8())
- #include "Template/Template_Endpoint_Control_R.c"
-#endif
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h deleted file mode 100644 index 77c9c82fe..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h +++ /dev/null @@ -1,648 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Endpoint data stream transmission and reception management for the AVR8 microcontrollers.
- * \copydetails Group_EndpointStreamRW_AVR8
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_EndpointStreamRW
- * \defgroup Group_EndpointStreamRW_AVR8 Read/Write of Multi-Byte Streams (AVR8)
- * \brief Endpoint data stream transmission and reception management for the Atmel AVR8 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of data streams from
- * and to endpoints.
- *
- * @{
- */
-
-#ifndef __ENDPOINT_STREAM_AVR8_H__
-#define __ENDPOINT_STREAM_AVR8_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBMode.h"
- #include "../USBTask.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Function Prototypes: */
- /** \name Stream functions for null data */
- //@{
-
- /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes empty while there is still data to process (and after the current
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number
- * of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Discard_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Discard_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Length Number of bytes to discard via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- /** Writes a given number of zeroed bytes to the currently selected endpoint's bank, sending
- * full packets to the host as needed. The last packet is not automatically sent once the
- * remaining bytes have been written; the user is responsible for manually sending the last
- * packet to the host via the \ref Endpoint_ClearIN() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes full while there is still data to process (and after the current
- * packet transmission has been initiated) the BytesProcessed location will be updated with the
- * total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Null_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Null_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Length Number of zero bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- //@}
-
- /** \name Stream functions for RAM source/destination data */
- //@{
-
- /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
- * sending full packets to the host as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Endpoint_ClearIN() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes full while there is still data to process (and after the current
- * packet transmission has been initiated) the BytesProcessed location will be updated with the
- * total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Stream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the endpoint from the given buffer in big endian,
- * sending full packets to the host as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Endpoint_ClearIN() macro.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Stream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the endpoint from the given buffer in little endian,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes empty while there is still data to process (and after the current
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number
- * of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Stream_LE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the endpoint from the given buffer in big endian,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Stream_BE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
- * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the status OUT packet
- * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_Stream_LE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
- * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the status OUT packet
- * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_Stream_BE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
- * discarding fully read packets from the host as needed. The device IN acknowledgement is not
- * automatically sent after success or failure states; the user is responsible for manually sending the
- * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_Stream_LE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
- * discarding fully read packets from the host as needed. The device IN acknowledgement is not
- * automatically sent after success or failure states; the user is responsible for manually sending the
- * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /** \name Stream functions for EEPROM source/destination data */
- //@{
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_EStream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_EStream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_LE().
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_EStream_LE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_BE().
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_EStream_BE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_EStream_LE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_EStream_BE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_EStream_LE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /** \name Stream functions for PROGMEM source/destination data */
- //@{
-
- /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_PStream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_PStream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_PStream_LE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c deleted file mode 100644 index 0002a256d..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c +++ /dev/null @@ -1,201 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_AVR8)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#include "../Endpoint.h"
-
-#if !defined(FIXED_CONTROL_ENDPOINT_SIZE)
-uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE;
-#endif
-
-bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table,
- const uint8_t Entries)
-{
- for (uint8_t i = 0; i < Entries; i++)
- {
- if (!(Table[i].Address))
- continue;
-
- if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks)))
- return false;
- }
-
- return true;
-}
-
-bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number,
- const uint8_t UECFG0XData,
- const uint8_t UECFG1XData)
-{
-#if defined(CONTROL_ONLY_DEVICE) || defined(ORDERED_EP_CONFIG)
- Endpoint_SelectEndpoint(Number);
- Endpoint_EnableEndpoint();
-
- UECFG1X = 0;
- UECFG0X = UECFG0XData;
- UECFG1X = UECFG1XData;
-
- return Endpoint_IsConfigured();
-#else
- for (uint8_t EPNum = Number; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++)
- {
- uint8_t UECFG0XTemp;
- uint8_t UECFG1XTemp;
- uint8_t UEIENXTemp;
-
- Endpoint_SelectEndpoint(EPNum);
-
- if (EPNum == Number)
- {
- UECFG0XTemp = UECFG0XData;
- UECFG1XTemp = UECFG1XData;
- UEIENXTemp = 0;
- }
- else
- {
- UECFG0XTemp = UECFG0X;
- UECFG1XTemp = UECFG1X;
- UEIENXTemp = UEIENX;
- }
-
- if (!(UECFG1XTemp & (1 << ALLOC)))
- continue;
-
- Endpoint_DisableEndpoint();
- UECFG1X &= ~(1 << ALLOC);
-
- Endpoint_EnableEndpoint();
- UECFG0X = UECFG0XTemp;
- UECFG1X = UECFG1XTemp;
- UEIENX = UEIENXTemp;
-
- if (!(Endpoint_IsConfigured()))
- return false;
- }
-
- Endpoint_SelectEndpoint(Number);
- return true;
-#endif
-}
-
-void Endpoint_ClearEndpoints(void)
-{
- UEINT = 0;
-
- for (uint8_t EPNum = 0; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++)
- {
- Endpoint_SelectEndpoint(EPNum);
- UEIENX = 0;
- UEINTX = 0;
- UECFG1X = 0;
- Endpoint_DisableEndpoint();
- }
-}
-
-void Endpoint_ClearStatusStage(void)
-{
- if (USB_ControlRequest.bmRequestType & REQDIR_DEVICETOHOST)
- {
- while (!(Endpoint_IsOUTReceived()))
- {
- if (USB_DeviceState == DEVICE_STATE_Unattached)
- return;
- }
-
- Endpoint_ClearOUT();
- }
- else
- {
- while (!(Endpoint_IsINReady()))
- {
- if (USB_DeviceState == DEVICE_STATE_Unattached)
- return;
- }
-
- Endpoint_ClearIN();
- }
-}
-
-#if !defined(CONTROL_ONLY_DEVICE)
-uint8_t Endpoint_WaitUntilReady(void)
-{
- #if (USB_STREAM_TIMEOUT_MS < 0xFF)
- uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
- #else
- uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
- #endif
-
- uint16_t PreviousFrameNumber = USB_Device_GetFrameNumber();
-
- for (;;)
- {
- if (Endpoint_GetEndpointDirection() == ENDPOINT_DIR_IN)
- {
- if (Endpoint_IsINReady())
- return ENDPOINT_READYWAIT_NoError;
- }
- else
- {
- if (Endpoint_IsOUTReceived())
- return ENDPOINT_READYWAIT_NoError;
- }
-
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_READYWAIT_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_READYWAIT_BusSuspended;
- else if (Endpoint_IsStalled())
- return ENDPOINT_READYWAIT_EndpointStalled;
-
- uint16_t CurrentFrameNumber = USB_Device_GetFrameNumber();
-
- if (CurrentFrameNumber != PreviousFrameNumber)
- {
- PreviousFrameNumber = CurrentFrameNumber;
-
- if (!(TimeoutMSRem--))
- return ENDPOINT_READYWAIT_Timeout;
- }
- }
-}
-#endif
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h deleted file mode 100644 index 08944babc..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h +++ /dev/null @@ -1,819 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Endpoint definitions for the AVR8 microcontrollers.
- * \copydetails Group_EndpointManagement_AVR8
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_EndpointRW
- * \defgroup Group_EndpointRW_AVR8 Endpoint Data Reading and Writing (AVR8)
- * \brief Endpoint data read/write definitions for the Atmel AVR8 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints.
- */
-
-/** \ingroup Group_EndpointPrimitiveRW
- * \defgroup Group_EndpointPrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8)
- * \brief Endpoint primitive read/write definitions for the Atmel AVR8 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
- * from and to endpoints.
- */
-
-/** \ingroup Group_EndpointPacketManagement
- * \defgroup Group_EndpointPacketManagement_AVR8 Endpoint Packet Management (AVR8)
- * \brief Endpoint packet management definitions for the Atmel AVR8 architecture.
- *
- * Functions, macros, variables, enums and types related to packet management of endpoints.
- */
-
-/** \ingroup Group_EndpointManagement
- * \defgroup Group_EndpointManagement_AVR8 Endpoint Management (AVR8)
- * \brief Endpoint management definitions for the Atmel AVR8 architecture.
- *
- * Functions, macros and enums related to endpoint management when in USB Device mode. This
- * module contains the endpoint management macros, as well as endpoint interrupt and data
- * send/receive functions for various data types.
- *
- * @{
- */
-
-#ifndef __ENDPOINT_AVR8_H__
-#define __ENDPOINT_AVR8_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBTask.h"
- #include "../USBInterrupt.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Inline Functions: */
- static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST
- ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes)
- {
- uint8_t MaskVal = 0;
- uint16_t CheckBytes = 8;
-
- while (CheckBytes < Bytes)
- {
- MaskVal++;
- CheckBytes <<= 1;
- }
-
- return (MaskVal << EPSIZE0);
- }
-
- /* Function Prototypes: */
- void Endpoint_ClearEndpoints(void);
- bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number,
- const uint8_t UECFG0XData,
- const uint8_t UECFG1XData);
-
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
- /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size
- * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined.
- */
- #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8
- #endif
-
- #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__)
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- #define ENDPOINT_TOTAL_ENDPOINTS 7
- #else
- /** Total number of endpoints (including the default control endpoint at address 0) which may
- * be used in the device. Different USB AVR models support different amounts of endpoints,
- * this value reflects the maximum number of endpoints for the currently selected AVR model.
- */
- #define ENDPOINT_TOTAL_ENDPOINTS 5
- #endif
- #else
- #define ENDPOINT_TOTAL_ENDPOINTS 1
- #endif
-
- /* Enums: */
- /** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function.
- *
- * \ingroup Group_EndpointRW_AVR8
- */
- enum Endpoint_WaitUntilReady_ErrorCodes_t
- {
- ENDPOINT_READYWAIT_NoError = 0, /**< Endpoint is ready for next packet, no error. */
- ENDPOINT_READYWAIT_EndpointStalled = 1, /**< The endpoint was stalled during the stream
- * transfer by the host or device.
- */
- ENDPOINT_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while
- * waiting for the endpoint to become ready.
- */
- ENDPOINT_READYWAIT_BusSuspended = 3, /**< The USB bus has been suspended by the host and
- * no USB endpoint traffic can occur until the bus
- * has resumed.
- */
- ENDPOINT_READYWAIT_Timeout = 4, /**< The host failed to accept or send the next packet
- * within the software timeout period set by the
- * \ref USB_STREAM_TIMEOUT_MS macro.
- */
- };
-
- /* Inline Functions: */
- /** Configures the specified endpoint address with the given endpoint type, bank size and number of hardware
- * banks. Once configured, the endpoint may be read from or written to, depending on its direction.
- *
- * \param[in] Address Endpoint address to configure.
- *
- * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types
- * are available on Low Speed USB devices - refer to the USB 2.0 specification.
- *
- * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted
- * to the USB host, or after they have been received from the USB host (depending on
- * the endpoint's data direction). The bank size must indicate the maximum packet size
- * that the endpoint can handle.
- *
- * \param[in] Banks Number of banks to use for the endpoint being configured.
- *
- * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in
- * ascending order, or bank corruption will occur.
- *
- * \note Different endpoints may have different maximum packet sizes based on the endpoint's index - please
- * refer to the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint.
- * \n\n
- *
- * \note The default control endpoint should not be manually configured by the user application, as
- * it is automatically configured by the library internally.
- * \n\n
- *
- * \note This routine will automatically select the specified endpoint upon success. Upon failure, the endpoint
- * which failed to reconfigure correctly will be selected.
- *
- * \return Boolean \c true if the configuration succeeded, \c false otherwise.
- */
- static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address,
- const uint8_t Type,
- const uint16_t Size,
- const uint8_t Banks) ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address,
- const uint8_t Type,
- const uint16_t Size,
- const uint8_t Banks)
- {
- uint8_t Number = (Address & ENDPOINT_EPNUM_MASK);
-
- if (Number >= ENDPOINT_TOTAL_ENDPOINTS)
- return false;
-
- return Endpoint_ConfigureEndpoint_Prv(Number,
- ((Type << EPTYPE0) | ((Address & ENDPOINT_DIR_IN) ? (1 << EPDIR) : 0)),
- ((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Endpoint_BytesToEPSizeMask(Size)));
- }
-
- /** Indicates the number of bytes currently stored in the current endpoint's selected bank.
- *
- * \ingroup Group_EndpointRW_AVR8
- *
- * \return Total number of bytes in the currently selected Endpoint's FIFO buffer.
- */
- static inline uint16_t Endpoint_BytesInEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Endpoint_BytesInEndpoint(void)
- {
- #if (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)) && !defined(__AVR_ATmega32U6__)
- return UEBCX;
- #elif defined(USB_SERIES_4_AVR) || defined(__AVR_ATmega32U6__)
- return (((uint16_t)UEBCHX << 8) | UEBCLX);
- #elif defined(USB_SERIES_2_AVR)
- return UEBCLX;
- #endif
- }
-
- /** Determines the currently selected endpoint's direction.
- *
- * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask.
- */
- static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_GetEndpointDirection(void)
- {
- return (UECFG0X & (1 << EPDIR)) ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT;
- }
-
- /** Get the endpoint address of the currently selected endpoint. This is typically used to save
- * the currently selected endpoint so that it can be restored after another endpoint has been
- * manipulated.
- *
- * \return Index of the currently selected endpoint.
- */
- static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_GetCurrentEndpoint(void)
- {
- #if !defined(CONTROL_ONLY_DEVICE)
- return ((UENUM & ENDPOINT_EPNUM_MASK) | Endpoint_GetEndpointDirection());
- #else
- return ENDPOINT_CONTROLEP;
- #endif
- }
-
- /** Selects the given endpoint address.
- *
- * Any endpoint operations which do not require the endpoint address to be indicated will operate on
- * the currently selected endpoint.
- *
- * \param[in] Address Endpoint address to select.
- */
- static inline void Endpoint_SelectEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_SelectEndpoint(const uint8_t Address)
- {
- #if !defined(CONTROL_ONLY_DEVICE)
- UENUM = (Address & ENDPOINT_EPNUM_MASK);
- #endif
- }
-
- /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's
- * data In and Out pointers to the bank's contents.
- *
- * \param[in] Address Endpoint address whose FIFO buffers are to be reset.
- */
- static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ResetEndpoint(const uint8_t Address)
- {
- UERST = (1 << (Address & ENDPOINT_EPNUM_MASK));
- UERST = 0;
- }
-
- /** Enables the currently selected endpoint so that data can be sent and received through it to
- * and from a host.
- *
- * \note Endpoints must first be configured properly via \ref Endpoint_ConfigureEndpoint().
- */
- static inline void Endpoint_EnableEndpoint(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_EnableEndpoint(void)
- {
- UECONX |= (1 << EPEN);
- }
-
- /** Disables the currently selected endpoint so that data cannot be sent and received through it
- * to and from a host.
- */
- static inline void Endpoint_DisableEndpoint(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_DisableEndpoint(void)
- {
- UECONX &= ~(1 << EPEN);
- }
-
- /** Determines if the currently selected endpoint is enabled, but not necessarily configured.
- *
- * \return Boolean \c true if the currently selected endpoint is enabled, \c false otherwise.
- */
- static inline bool Endpoint_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsEnabled(void)
- {
- return ((UECONX & (1 << EPEN)) ? true : false);
- }
-
- /** Retrieves the number of busy banks in the currently selected endpoint, which have been queued for
- * transmission via the \ref Endpoint_ClearIN() command, or are awaiting acknowledgement via the
- * \ref Endpoint_ClearOUT() command.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- *
- * \return Total number of busy banks in the selected endpoint.
- */
- static inline uint8_t Endpoint_GetBusyBanks(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Endpoint_GetBusyBanks(void)
- {
- return (UESTA0X & (0x03 << NBUSYBK0));
- }
-
- /** Aborts all pending IN transactions on the currently selected endpoint, once the bank
- * has been queued for transmission to the host via \ref Endpoint_ClearIN(). This function
- * will terminate all queued transactions, resetting the endpoint banks ready for a new
- * packet.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- */
- static inline void Endpoint_AbortPendingIN(void)
- {
- while (Endpoint_GetBusyBanks() != 0)
- {
- UEINTX |= (1 << RXOUTI);
- while (UEINTX & (1 << RXOUTI));
- }
- }
-
- /** Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint
- * bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN
- * direction). This function will return false if an error has occurred in the endpoint, if the endpoint
- * is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN
- * direction and the endpoint bank is full.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- *
- * \return Boolean \c true if the currently selected endpoint may be read from or written to, depending
- * on its direction.
- */
- static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsReadWriteAllowed(void)
- {
- return ((UEINTX & (1 << RWAL)) ? true : false);
- }
-
- /** Determines if the currently selected endpoint is configured.
- *
- * \return Boolean \c true if the currently selected endpoint has been configured, \c false otherwise.
- */
- static inline bool Endpoint_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsConfigured(void)
- {
- return ((UESTA0X & (1 << CFGOK)) ? true : false);
- }
-
- /** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their
- * interrupt duration has elapsed. Which endpoints have interrupted can be determined by
- * masking the return value against <tt>(1 << <i>{Endpoint Number}</i>)</tt>.
- *
- * \return Mask whose bits indicate which endpoints have interrupted.
- */
- static inline uint8_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_GetEndpointInterrupts(void)
- {
- return UEINT;
- }
-
- /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type
- * endpoints).
- *
- * \param[in] Address Address of the endpoint whose interrupt flag should be tested.
- *
- * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise.
- */
- static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address)
- {
- return ((Endpoint_GetEndpointInterrupts() & (1 << (Address & ENDPOINT_EPNUM_MASK))) ? true : false);
- }
-
- /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- *
- * \return Boolean \c true if the current endpoint is ready for an IN packet, \c false otherwise.
- */
- static inline bool Endpoint_IsINReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsINReady(void)
- {
- return ((UEINTX & (1 << TXINI)) ? true : false);
- }
-
- /** Determines if the selected OUT endpoint has received new packet from the host.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- *
- * \return Boolean \c true if current endpoint is has received an OUT packet, \c false otherwise.
- */
- static inline bool Endpoint_IsOUTReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsOUTReceived(void)
- {
- return ((UEINTX & (1 << RXOUTI)) ? true : false);
- }
-
- /** Determines if the current CONTROL type endpoint has received a SETUP packet.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- *
- * \return Boolean \c true if the selected endpoint has received a SETUP packet, \c false otherwise.
- */
- static inline bool Endpoint_IsSETUPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsSETUPReceived(void)
- {
- return ((UEINTX & (1 << RXSTPI)) ? true : false);
- }
-
- /** Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the
- * endpoint for the next packet.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- *
- * \note This is not applicable for non CONTROL type endpoints.
- */
- static inline void Endpoint_ClearSETUP(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearSETUP(void)
- {
- UEINTX &= ~(1 << RXSTPI);
- }
-
- /** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the
- * next packet and switching to the alternative endpoint bank if double banked.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- */
- static inline void Endpoint_ClearIN(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearIN(void)
- {
- #if !defined(CONTROL_ONLY_DEVICE)
- UEINTX &= ~((1 << TXINI) | (1 << FIFOCON));
- #else
- UEINTX &= ~(1 << TXINI);
- #endif
- }
-
- /** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint
- * for the next packet and switching to the alternative endpoint bank if double banked.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- */
- static inline void Endpoint_ClearOUT(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearOUT(void)
- {
- #if !defined(CONTROL_ONLY_DEVICE)
- UEINTX &= ~((1 << RXOUTI) | (1 << FIFOCON));
- #else
- UEINTX &= ~(1 << RXOUTI);
- #endif
- }
-
- /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the
- * indicated endpoint and that the current transfer sequence should be aborted. This provides a
- * way for devices to indicate invalid commands to the host so that the current transfer can be
- * aborted and the host can begin its own recovery sequence.
- *
- * The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro
- * is called, or the host issues a CLEAR FEATURE request to the device for the currently selected
- * endpoint.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- */
- static inline void Endpoint_StallTransaction(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_StallTransaction(void)
- {
- UECONX |= (1 << STALLRQ);
- }
-
- /** Clears the STALL condition on the currently selected endpoint.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- */
- static inline void Endpoint_ClearStall(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearStall(void)
- {
- UECONX |= (1 << STALLRQC);
- }
-
- /** Determines if the currently selected endpoint is stalled, false otherwise.
- *
- * \ingroup Group_EndpointPacketManagement_AVR8
- *
- * \return Boolean \c true if the currently selected endpoint is stalled, \c false otherwise.
- */
- static inline bool Endpoint_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsStalled(void)
- {
- return ((UECONX & (1 << STALLRQ)) ? true : false);
- }
-
- /** Resets the data toggle of the currently selected endpoint. */
- static inline void Endpoint_ResetDataToggle(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ResetDataToggle(void)
- {
- UECONX |= (1 << RSTDT);
- }
-
- /** Sets the direction of the currently selected endpoint.
- *
- * \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask.
- */
- static inline void Endpoint_SetEndpointDirection(const uint8_t DirectionMask) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_SetEndpointDirection(const uint8_t DirectionMask)
- {
- UECFG0X = ((UECFG0X & ~(1 << EPDIR)) | (DirectionMask ? (1 << EPDIR) : 0));
- }
-
- /** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- *
- * \return Next byte in the currently selected endpoint's FIFO buffer.
- */
- static inline uint8_t Endpoint_Read_8(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_Read_8(void)
- {
- return UEDATX;
- }
-
- /** Writes one byte to the currently selected endpoint's bank, for IN direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- *
- * \param[in] Data Data to write into the the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_8(const uint8_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_8(const uint8_t Data)
- {
- UEDATX = Data;
- }
-
- /** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- */
- static inline void Endpoint_Discard_8(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Discard_8(void)
- {
- uint8_t Dummy;
-
- Dummy = UEDATX;
-
- (void)Dummy;
- }
-
- /** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- *
- * \return Next two bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint16_t Endpoint_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Endpoint_Read_16_LE(void)
- {
- union
- {
- uint16_t Value;
- uint8_t Bytes[2];
- } Data;
-
- Data.Bytes[0] = UEDATX;
- Data.Bytes[1] = UEDATX;
-
- return Data.Value;
- }
-
- /** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- *
- * \return Next two bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint16_t Endpoint_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Endpoint_Read_16_BE(void)
- {
- union
- {
- uint16_t Value;
- uint8_t Bytes[2];
- } Data;
-
- Data.Bytes[1] = UEDATX;
- Data.Bytes[0] = UEDATX;
-
- return Data.Value;
- }
-
- /** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_16_LE(const uint16_t Data)
- {
- UEDATX = (Data & 0xFF);
- UEDATX = (Data >> 8);
- }
-
- /** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_16_BE(const uint16_t Data)
- {
- UEDATX = (Data >> 8);
- UEDATX = (Data & 0xFF);
- }
-
- /** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- */
- static inline void Endpoint_Discard_16(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Discard_16(void)
- {
- uint8_t Dummy;
-
- Dummy = UEDATX;
- Dummy = UEDATX;
-
- (void)Dummy;
- }
-
- /** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- *
- * \return Next four bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint32_t Endpoint_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Endpoint_Read_32_LE(void)
- {
- union
- {
- uint32_t Value;
- uint8_t Bytes[4];
- } Data;
-
- Data.Bytes[0] = UEDATX;
- Data.Bytes[1] = UEDATX;
- Data.Bytes[2] = UEDATX;
- Data.Bytes[3] = UEDATX;
-
- return Data.Value;
- }
-
- /** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- *
- * \return Next four bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint32_t Endpoint_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Endpoint_Read_32_BE(void)
- {
- union
- {
- uint32_t Value;
- uint8_t Bytes[4];
- } Data;
-
- Data.Bytes[3] = UEDATX;
- Data.Bytes[2] = UEDATX;
- Data.Bytes[1] = UEDATX;
- Data.Bytes[0] = UEDATX;
-
- return Data.Value;
- }
-
- /** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_32_LE(const uint32_t Data)
- {
- UEDATX = (Data & 0xFF);
- UEDATX = (Data >> 8);
- UEDATX = (Data >> 16);
- UEDATX = (Data >> 24);
- }
-
- /** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_32_BE(const uint32_t Data)
- {
- UEDATX = (Data >> 24);
- UEDATX = (Data >> 16);
- UEDATX = (Data >> 8);
- UEDATX = (Data & 0xFF);
- }
-
- /** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_AVR8
- */
- static inline void Endpoint_Discard_32(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Discard_32(void)
- {
- uint8_t Dummy;
-
- Dummy = UEDATX;
- Dummy = UEDATX;
- Dummy = UEDATX;
- Dummy = UEDATX;
-
- (void)Dummy;
- }
-
- /* External Variables: */
- /** Global indicating the maximum packet size of the default control endpoint located at address
- * 0 in the device. This value is set to the value indicated in the device descriptor in the user
- * project once the USB interface is initialized into device mode.
- *
- * If space is an issue, it is possible to fix this to a static value by defining the control
- * endpoint size in the \c FIXED_CONTROL_ENDPOINT_SIZE token passed to the compiler in the makefile
- * via the -D switch. When a fixed control endpoint size is used, the size is no longer dynamically
- * read from the descriptors at runtime and instead fixed to the given value. When used, it is
- * important that the descriptor control endpoint size value matches the size given as the
- * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token
- * be used in the device descriptors to ensure this.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- */
- #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
- extern uint8_t USB_Device_ControlEndpointSize;
- #else
- #define USB_Device_ControlEndpointSize FIXED_CONTROL_ENDPOINT_SIZE
- #endif
-
- /* Function Prototypes: */
- /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple
- * endpoints at the same time.
- *
- * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the
- * control endpoint.
- *
- * \param[in] Table Pointer to a table of endpoint descriptions.
- * \param[in] Entries Number of entries in the endpoint table to configure.
- *
- * \return Boolean \c true if all endpoints configured successfully, \c false otherwise.
- */
- bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table,
- const uint8_t Entries);
-
- /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically,
- * with respect to the data direction. This is a convenience function which can be used to
- * simplify user control request handling.
- *
- * \note This routine should not be called on non CONTROL type endpoints.
- */
- void Endpoint_ClearStatusStage(void);
-
- /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data
- * to be read or written to it.
- *
- * \note This routine should not be called on CONTROL type endpoints.
- *
- * \ingroup Group_EndpointRW_AVR8
- *
- * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t Endpoint_WaitUntilReady(void);
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c deleted file mode 100644 index d93268337..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c +++ /dev/null @@ -1,294 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_AVR8)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_HOST_C
-#include "../Host.h"
-
-void USB_Host_ProcessNextHostState(void)
-{
- uint8_t ErrorCode = HOST_ENUMERROR_NoError;
- uint8_t SubErrorCode = HOST_ENUMERROR_NoError;
-
- static uint16_t WaitMSRemaining;
- static uint8_t PostWaitState;
-
- switch (USB_HostState)
- {
- case HOST_STATE_WaitForDevice:
- if (WaitMSRemaining)
- {
- if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
- {
- USB_HostState = PostWaitState;
- ErrorCode = HOST_ENUMERROR_WaitStage;
- break;
- }
-
- if (!(--WaitMSRemaining))
- USB_HostState = PostWaitState;
- }
-
- break;
- case HOST_STATE_Powered:
- WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS;
-
- USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle;
- break;
- case HOST_STATE_Powered_WaitForDeviceSettle:
- if (WaitMSRemaining--)
- {
- Delay_MS(1);
- break;
- }
- else
- {
- USB_Host_VBUS_Manual_Off();
-
- USB_OTGPAD_On();
- USB_Host_VBUS_Auto_Enable();
- USB_Host_VBUS_Auto_On();
-
- #if defined(NO_AUTO_VBUS_MANAGEMENT)
- USB_Host_VBUS_Manual_Enable();
- USB_Host_VBUS_Manual_On();
- #endif
-
- USB_HostState = HOST_STATE_Powered_WaitForConnect;
- }
-
- break;
- case HOST_STATE_Powered_WaitForConnect:
- if (USB_INT_HasOccurred(USB_INT_DCONNI))
- {
- USB_INT_Clear(USB_INT_DCONNI);
- USB_INT_Clear(USB_INT_DDISCI);
-
- USB_INT_Clear(USB_INT_VBERRI);
- USB_INT_Enable(USB_INT_VBERRI);
-
- USB_Host_ResumeBus();
- Pipe_ClearPipes();
-
- HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset);
- }
-
- break;
- case HOST_STATE_Powered_DoReset:
- USB_Host_ResetDevice();
-
- HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe);
- break;
- case HOST_STATE_Powered_ConfigPipe:
- if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, PIPE_CONTROLPIPE_DEFAULT_SIZE, 1)))
- {
- ErrorCode = HOST_ENUMERROR_PipeConfigError;
- SubErrorCode = 0;
- break;
- }
-
- USB_HostState = HOST_STATE_Default;
- break;
- case HOST_STATE_Default:
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
- .bRequest = REQ_GetDescriptor,
- .wValue = (DTYPE_Device << 8),
- .wIndex = 0,
- .wLength = 8,
- };
-
- uint8_t DataBuffer[8];
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
- if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful)
- {
- ErrorCode = HOST_ENUMERROR_ControlError;
- break;
- }
-
- USB_Host_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)];
-
- USB_Host_ResetDevice();
-
- HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset);
- break;
- case HOST_STATE_Default_PostReset:
- if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, USB_Host_ControlPipeSize, 1)))
- {
- ErrorCode = HOST_ENUMERROR_PipeConfigError;
- SubErrorCode = 0;
- break;
- }
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
- .bRequest = REQ_SetAddress,
- .wValue = USB_HOST_DEVICEADDRESS,
- .wIndex = 0,
- .wLength = 0,
- };
-
- if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
- {
- ErrorCode = HOST_ENUMERROR_ControlError;
- break;
- }
-
- HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet);
- break;
- case HOST_STATE_Default_PostAddressSet:
- USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS);
-
- USB_HostState = HOST_STATE_Addressed;
-
- EVENT_USB_Host_DeviceEnumerationComplete();
- break;
- }
-
- if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached))
- {
- EVENT_USB_Host_DeviceEnumerationFailed(ErrorCode, SubErrorCode);
-
- USB_Host_VBUS_Auto_Off();
-
- EVENT_USB_Host_DeviceUnattached();
-
- USB_ResetInterface();
- }
-}
-
-uint8_t USB_Host_WaitMS(uint8_t MS)
-{
- bool BusSuspended = USB_Host_IsBusSuspended();
- uint8_t ErrorCode = HOST_WAITERROR_Successful;
- bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
-
- USB_INT_Disable(USB_INT_HSOFI);
- USB_INT_Clear(USB_INT_HSOFI);
-
- USB_Host_ResumeBus();
-
- while (MS)
- {
- if (USB_INT_HasOccurred(USB_INT_HSOFI))
- {
- USB_INT_Clear(USB_INT_HSOFI);
- MS--;
- }
-
- if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode != USB_MODE_Host))
- {
- ErrorCode = HOST_WAITERROR_DeviceDisconnect;
-
- break;
- }
-
- if (Pipe_IsError())
- {
- Pipe_ClearError();
- ErrorCode = HOST_WAITERROR_PipeError;
-
- break;
- }
-
- if (Pipe_IsStalled())
- {
- Pipe_ClearStall();
- ErrorCode = HOST_WAITERROR_SetupStalled;
-
- break;
- }
- }
-
- if (BusSuspended)
- USB_Host_SuspendBus();
-
- if (HSOFIEnabled)
- USB_INT_Enable(USB_INT_HSOFI);
-
- return ErrorCode;
-}
-
-static void USB_Host_ResetDevice(void)
-{
- bool BusSuspended = USB_Host_IsBusSuspended();
-
- USB_INT_Disable(USB_INT_DDISCI);
-
- USB_Host_ResetBus();
- while (!(USB_Host_IsBusResetComplete()));
- USB_Host_ResumeBus();
-
- USB_Host_ConfigurationNumber = 0;
-
- bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
-
- USB_INT_Disable(USB_INT_HSOFI);
- USB_INT_Clear(USB_INT_HSOFI);
-
- for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
- {
- /* Workaround for powerless-pull-up devices. After a USB bus reset,
- all disconnection interrupts are suppressed while a USB frame is
- looked for - if it is found within 10ms, the device is still
- present. */
-
- if (USB_INT_HasOccurred(USB_INT_HSOFI))
- {
- USB_INT_Clear(USB_INT_HSOFI);
- USB_INT_Clear(USB_INT_DDISCI);
- break;
- }
-
- Delay_MS(1);
- }
-
- if (HSOFIEnabled)
- USB_INT_Enable(USB_INT_HSOFI);
-
- if (BusSuspended)
- USB_Host_SuspendBus();
-
- USB_INT_Enable(USB_INT_DDISCI);
-}
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h deleted file mode 100644 index f8d92f81f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.h +++ /dev/null @@ -1,372 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Host definitions for the AVR8 microcontrollers.
- * \copydetails Group_Host_AVR8
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_Host
- * \defgroup Group_Host_AVR8 Host Management (AVR8)
- * \brief USB Host definitions for the AVR8 microcontrollers.
- *
- * Architecture specific USB Host definitions for the Atmel 8-bit AVR microcontrollers.
- *
- * @{
- */
-
-#ifndef __USBHOST_AVR8_H__
-#define __USBHOST_AVR8_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../StdDescriptors.h"
- #include "../Pipe.h"
- #include "../USBInterrupt.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- #if defined(INVERTED_VBUS_ENABLE_LINE) && !defined(NO_AUTO_VBUS_MANAGEMENT)
- #error The INVERTED_VBUS_ENABLE_LINE compile option requires NO_AUTO_VBUS_MANAGEMENT for the AVR8 architecture.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Indicates the fixed USB device address which any attached device is enumerated to when in
- * host mode. As only one USB device may be attached to the AVR in host mode at any one time
- * and that the address used is not important (other than the fact that it is non-zero), a
- * fixed value is specified by the library.
- */
- #define USB_HOST_DEVICEADDRESS 1
-
- #if !defined(HOST_DEVICE_SETTLE_DELAY_MS) || defined(__DOXYGEN__)
- /** Constant for the delay in milliseconds after a device is connected before the library
- * will start the enumeration process. Some devices require a delay of up to 5 seconds
- * after connection before the enumeration process can start or incorrect operation will
- * occur.
- *
- * The default delay value may be overridden in the user project makefile by defining the
- * \c HOST_DEVICE_SETTLE_DELAY_MS token to the required delay in milliseconds, and passed to the
- * compiler using the -D switch.
- */
- #define HOST_DEVICE_SETTLE_DELAY_MS 1000
- #endif
-
- /** Enum for the error codes for the \ref EVENT_USB_Host_HostError() event.
- *
- * \see \ref Group_Events for more information on this event.
- */
- enum USB_Host_ErrorCodes_t
- {
- HOST_ERROR_VBusVoltageDip = 0, /**< VBUS voltage dipped to an unacceptable level. This
- * error may be the result of an attached device drawing
- * too much current from the VBUS line, or due to the
- * AVR's power source being unable to supply sufficient
- * current.
- */
- };
-
- /** Enum for the error codes for the \ref EVENT_USB_Host_DeviceEnumerationFailed() event.
- *
- * \see \ref Group_Events for more information on this event.
- */
- enum USB_Host_EnumerationErrorCodes_t
- {
- HOST_ENUMERROR_NoError = 0, /**< No error occurred. Used internally, this is not a valid
- * ErrorCode parameter value for the \ref EVENT_USB_Host_DeviceEnumerationFailed()
- * event.
- */
- HOST_ENUMERROR_WaitStage = 1, /**< One of the delays between enumeration steps failed
- * to complete successfully, due to a timeout or other
- * error.
- */
- HOST_ENUMERROR_NoDeviceDetected = 2, /**< No device was detected, despite the USB data lines
- * indicating the attachment of a device.
- */
- HOST_ENUMERROR_ControlError = 3, /**< One of the enumeration control requests failed to
- * complete successfully.
- */
- HOST_ENUMERROR_PipeConfigError = 4, /**< The default control pipe (address 0) failed to
- * configure correctly.
- */
- };
-
- /* Inline Functions: */
- /** Returns the current USB frame number, when in host mode. Every millisecond the USB bus is active (i.e. not suspended)
- * the frame number is incremented by one.
- *
- * \return Current USB frame number from the USB controller.
- */
- static inline uint16_t USB_Host_GetFrameNumber(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t USB_Host_GetFrameNumber(void)
- {
- return UHFNUM;
- }
-
- #if !defined(NO_SOF_EVENTS)
- /** Enables the host mode Start Of Frame events. When enabled, this causes the
- * \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
- * at the start of each USB frame when a device is enumerated while in host mode.
- *
- * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
- */
- static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_EnableSOFEvents(void)
- {
- USB_INT_Enable(USB_INT_HSOFI);
- }
-
- /** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the
- * \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode.
- *
- * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
- */
- static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_DisableSOFEvents(void)
- {
- USB_INT_Disable(USB_INT_HSOFI);
- }
- #endif
-
- /** Resets the USB bus, including the endpoints in any attached device and pipes on the AVR host.
- * USB bus resets leave the default control pipe configured (if already configured).
- *
- * If the USB bus has been suspended prior to issuing a bus reset, the attached device will be
- * woken up automatically and the bus resumed after the reset has been correctly issued.
- */
- static inline void USB_Host_ResetBus(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_ResetBus(void)
- {
- UHCON |= (1 << RESET);
- }
-
- /** Determines if a previously issued bus reset (via the \ref USB_Host_ResetBus() macro) has
- * completed.
- *
- * \return Boolean \c true if no bus reset is currently being sent, \c false otherwise.
- */
- static inline bool USB_Host_IsBusResetComplete(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_Host_IsBusResetComplete(void)
- {
- return ((UHCON & (1 << RESET)) ? false : true);
- }
-
- /** Resumes USB communications with an attached and enumerated device, by resuming the transmission
- * of the 1MS Start Of Frame messages to the device. When resumed, USB communications between the
- * host and attached device may occur.
- */
- static inline void USB_Host_ResumeBus(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_ResumeBus(void)
- {
- UHCON |= (1 << SOFEN);
- }
-
- /** Suspends the USB bus, preventing any communications from occurring between the host and attached
- * device until the bus has been resumed. This stops the transmission of the 1MS Start Of Frame
- * messages to the device.
- *
- * \attention While the USB bus is suspended, all USB interrupt sources are also disabled; this means that
- * some events (such as device disconnections) will not fire until the bus is resumed.
- */
- static inline void USB_Host_SuspendBus(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_SuspendBus(void)
- {
- UHCON &= ~(1 << SOFEN);
- }
-
- /** Determines if the USB bus has been suspended via the use of the \ref USB_Host_SuspendBus() macro,
- * false otherwise. While suspended, no USB communications can occur until the bus is resumed,
- * except for the Remote Wakeup event from the device if supported.
- *
- * \return Boolean \c true if the bus is currently suspended, \c false otherwise.
- */
- static inline bool USB_Host_IsBusSuspended(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_Host_IsBusSuspended(void)
- {
- return ((UHCON & (1 << SOFEN)) ? false : true);
- }
-
- /** Determines if the attached device is currently enumerated in Full Speed mode (12Mb/s), or
- * false if the attached device is enumerated in Low Speed mode (1.5Mb/s).
- *
- * \return Boolean \c true if the attached device is enumerated in Full Speed mode, \c false otherwise.
- */
- static inline bool USB_Host_IsDeviceFullSpeed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_Host_IsDeviceFullSpeed(void)
- {
- return ((USBSTA & (1 << SPEED)) ? true : false);
- }
-
- /** Determines if the attached device is currently issuing a Remote Wakeup request, requesting
- * that the host resume the USB bus and wake up the device, false otherwise.
- *
- * \return Boolean \c true if the attached device has sent a Remote Wakeup request, \c false otherwise.
- */
- static inline bool USB_Host_IsRemoteWakeupSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_Host_IsRemoteWakeupSent(void)
- {
- return ((UHINT & (1 << RXRSMI)) ? true : false);
- }
-
- /** Clears the flag indicating that a Remote Wakeup request has been issued by an attached device. */
- static inline void USB_Host_ClearRemoteWakeupSent(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_ClearRemoteWakeupSent(void)
- {
- UHINT &= ~(1 << RXRSMI);
- }
-
- /** Accepts a Remote Wakeup request from an attached device. This must be issued in response to
- * a device's Remote Wakeup request within 2ms for the request to be accepted and the bus to
- * be resumed.
- */
- static inline void USB_Host_ResumeFromWakeupRequest(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_ResumeFromWakeupRequest(void)
- {
- UHCON |= (1 << RESUME);
- }
-
- /** Determines if a resume from Remote Wakeup request is currently being sent to an attached
- * device.
- *
- * \return Boolean \c true if no resume request is currently being sent, \c false otherwise.
- */
- static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_Host_IsResumeFromWakeupRequestSent(void)
- {
- return ((UHCON & (1 << RESUME)) ? false : true);
- }
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- static inline void USB_Host_HostMode_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_HostMode_On(void)
- {
- USBCON |= (1 << HOST);
- }
-
- static inline void USB_Host_HostMode_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_HostMode_Off(void)
- {
- USBCON &= ~(1 << HOST);
- }
-
- static inline void USB_Host_VBUS_Auto_Enable(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Auto_Enable(void)
- {
- OTGCON &= ~(1 << VBUSHWC);
- UHWCON |= (1 << UVCONE);
- }
-
- static inline void USB_Host_VBUS_Manual_Enable(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Manual_Enable(void)
- {
- OTGCON |= (1 << VBUSHWC);
- UHWCON &= ~(1 << UVCONE);
-
- DDRE |= (1 << 7);
- }
-
- static inline void USB_Host_VBUS_Auto_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Auto_On(void)
- {
- OTGCON |= (1 << VBUSREQ);
- }
-
- static inline void USB_Host_VBUS_Manual_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Manual_On(void)
- {
- #if defined(INVERTED_VBUS_ENABLE_LINE)
- PORTE &= ~(1 << 7);
- #else
- PORTE |= (1 << 7);
- #endif
- }
-
- static inline void USB_Host_VBUS_Auto_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Auto_Off(void)
- {
- OTGCON |= (1 << VBUSRQC);
- }
-
- static inline void USB_Host_VBUS_Manual_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Manual_Off(void)
- {
- #if defined(INVERTED_VBUS_ENABLE_LINE)
- PORTE |= (1 << 7);
- #else
- PORTE &= ~(1 << 7);
- #endif
- }
-
- static inline void USB_Host_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_SetDeviceAddress(const uint8_t Address)
- {
- UHADDR = (Address & 0x7F);
- }
-
- /* Enums: */
- enum USB_Host_WaitMSErrorCodes_t
- {
- HOST_WAITERROR_Successful = 0,
- HOST_WAITERROR_DeviceDisconnect = 1,
- HOST_WAITERROR_PipeError = 2,
- HOST_WAITERROR_SetupStalled = 3,
- };
-
- /* Function Prototypes: */
- void USB_Host_ProcessNextHostState(void);
- uint8_t USB_Host_WaitMS(uint8_t MS);
-
- #if defined(__INCLUDE_FROM_HOST_C)
- static void USB_Host_ResetDevice(void);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h deleted file mode 100644 index 5296beb6a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h +++ /dev/null @@ -1,159 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB OTG definitions for the AVR8 microcontrollers.
- * \copydetails Group_OTG_AVR8
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_OTG
- * \defgroup Group_OTG_AVR8 USB On The Go (OTG) Management (AVR8)
- * \brief USB OTG definitions for the AVR8 microcontrollers.
- *
- * Architecture specific USB OTG definitions for the Atmel 8-bit AVR microcontrollers.
- *
- * @{
- */
-
-#ifndef __USBOTG_AVR8_H__
-#define __USBOTG_AVR8_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask for the VBUS pulsing method of SRP, supported by some OTG devices.
- *
- * \see \ref USB_OTG_Device_InitiateSRP().
- */
- #define USB_OTG_SRP_VBUS (1 << SRPSEL)
-
- /** Mask for the Data + pulsing method of SRP, supported by some OTG devices.
- *
- * \see \ref USB_OTG_Device_InitiateSRP().
- */
- #define USB_OTG_STP_DATA 0
-
- /* Inline Functions: */
- /** Initiate a Host Negotiation Protocol request. This indicates to the other connected device
- * that the device wishes to change device/host roles.
- */
- static inline void USB_OTG_Device_RequestHNP(void) ATTR_ALWAYS_INLINE;
- static inline void USB_OTG_Device_RequestHNP(void)
- {
- OTGCON |= (1 << HNPREQ);
- }
-
- /** Cancel a Host Negotiation Protocol request. This stops a pending HNP request to the other
- * connected device.
- */
- static inline void USB_OTG_Device_CancelHNPRequest(void) ATTR_ALWAYS_INLINE;
- static inline void USB_OTG_Device_CancelHNPRequest(void)
- {
- OTGCON &= ~(1 << HNPREQ);
- }
-
- /** Determines if the device is currently sending a HNP to an attached host.
- *
- * \return Boolean \c true if currently sending a HNP to the other connected device, \c false otherwise
- */
- static inline bool USB_OTG_Device_IsSendingHNP(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_OTG_Device_IsSendingHNP(void)
- {
- return ((OTGCON & (1 << HNPREQ)) ? true : false);
- }
-
- /** Initiates a Session Request Protocol request. Most OTG devices turn off VBUS when the USB
- * interface is not in use, to conserve power. Sending a SRP to a USB OTG device running in
- * host mode indicates that VBUS should be applied and a session started.
- *
- * There are two different methods of sending a SRP - either pulses on the VBUS line, or by
- * pulsing the Data + line via the internal pull-up resistor.
- *
- * \param[in] SRPTypeMask Mask indicating the type of SRP to use, either \ref USB_OTG_SRP_VBUS or
- * \ref USB_OTG_STP_DATA.
- */
- static inline void USB_OTG_Device_InitiateSRP(const uint8_t SRPTypeMask) ATTR_ALWAYS_INLINE;
- static inline void USB_OTG_Device_InitiateSRP(const uint8_t SRPTypeMask)
- {
- OTGCON = ((OTGCON & ~(1 << SRPSEL)) | (SRPTypeMask | (1 << SRPREQ)));
- }
-
- /** Accepts a HNP from a connected device, indicating that both devices should exchange
- * device/host roles.
- */
- static inline void USB_OTG_Host_AcceptHNP(void) ATTR_ALWAYS_INLINE;
- static inline void USB_OTG_Host_AcceptHNP(void)
- {
- OTGCON |= (1 << HNPREQ);
- }
-
- /** Rejects a HNP from a connected device, indicating that both devices should remain in their
- * current device/host roles.
- */
- static inline void USB_OTG_Host_RejectHNP(void) ATTR_ALWAYS_INLINE;
- static inline void USB_OTG_Host_RejectHNP(void)
- {
- OTGCON &= ~(1 << HNPREQ);
- }
-
- /** Indicates if the connected device is currently sending a HNP request.
- *
- * \return Boolean \c true if a HNP is currently being issued by the connected device, \c false otherwise.
- */
- static inline bool USB_OTG_Host_IsHNPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_OTG_Host_IsHNPReceived(void)
- {
- return ((OTGCON & (1 << HNPREQ)) ? true : false);
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c deleted file mode 100644 index e71a7bd32..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.c +++ /dev/null @@ -1,221 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_AVR8)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#include "PipeStream_AVR8.h"
-
-uint8_t Pipe_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t ErrorCode;
- uint16_t BytesInTransfer = 0;
-
- Pipe_SetPipeToken(PIPE_TOKEN_IN);
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- Length -= *BytesProcessed;
-
- while (Length)
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearIN();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return PIPE_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Pipe_Discard_8();
-
- Length--;
- BytesInTransfer++;
- }
- }
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t Pipe_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t ErrorCode;
- uint16_t BytesInTransfer = 0;
-
- Pipe_SetPipeToken(PIPE_TOKEN_OUT);
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- Length -= *BytesProcessed;
-
- while (Length)
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearOUT();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return PIPE_RWSTREAM_IncompleteTransfer;
- }
-
- USB_USBTask();
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Pipe_Write_8(0);
-
- Length--;
- BytesInTransfer++;
- }
- }
-
- return PIPE_RWSTREAM_NoError;
-}
-
-/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations,
- * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */
-
-#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr)
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr)
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_IN
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8()
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_IN
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8()
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(pgm_read_byte(BufferPtr))
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(pgm_read_byte(BufferPtr))
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(eeprom_read_byte(BufferPtr))
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(eeprom_read_byte(BufferPtr))
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_LE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_IN
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_8())
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_BE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_IN
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Pipe_Read_8())
-#include "Template/Template_Pipe_RW.c"
-
-#endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h deleted file mode 100644 index 8307ab497..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/PipeStream_AVR8.h +++ /dev/null @@ -1,442 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Pipe data stream transmission and reception management for the AVR8 microcontrollers
- * \copydetails Group_PipeStreamRW_AVR8
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_PipeStreamRW
- * \defgroup Group_PipeStreamRW_AVR8 Read/Write of Multi-Byte Streams (AVR8)
- * \brief Pipe data stream transmission and reception management for the Atmel AVR8 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of data streams from
- * and to pipes.
- *
- * @{
- */
-
-#ifndef __PIPE_STREAM_AVR8_H__
-#define __PIPE_STREAM_AVR8_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBMode.h"
- #include "../USBTask.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Function Prototypes: */
- /** \name Stream functions for null data */
- //@{
-
- /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
- * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the
- * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or
- * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer
- * will instead be performed as a series of chunks. Each time the pipe bank becomes empty while there is still data
- * to process (and after the current packet has been acknowledged) the BytesProcessed location will be updated with
- * the total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to
- * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed
- * value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Pipe_Discard_Stream(512, NULL)) != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Pipe_Discard_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[in] Length Number of bytes to discard via the currently selected pipe.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be processed at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- /** Writes a given number of zeroed bytes to the pipe, sending full pipe packets from the host to the device
- * as needed. The last packet is not automatically sent once the remaining bytes has been written; the
- * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearOUT() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or
- * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer
- * will instead be performed as a series of chunks. Each time the pipe bank becomes full while there is still data
- * to process (and after the current packet transmission has been initiated) the BytesProcessed location will be
- * updated with the total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to
- * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed
- * value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Pipe_Null_Stream(512, NULL)) != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Pipe_Null_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[in] Length Number of zero bytes to write via the currently selected pipe.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be processed at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- //@}
-
- /** \name Stream functions for RAM source/destination data */
- //@{
-
- /** Writes the given number of bytes to the pipe from the given buffer in little endian,
- * sending full packets to the device as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the pipe bank becomes full while there is still data to process (and after the current
- * packet transmission has been initiated) the BytesProcessed location will be updated with the
- * total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Write_Stream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the pipe from the given buffer in big endian,
- * sending full packets to the device as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Write_Stream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the pipe into the given buffer in little endian,
- * sending full packets to the device as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the pipe bank becomes empty while there is still data to process (and after the current
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number
- * of bytes processed in the stream, and the function will exit with an error code of
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[out] Buffer Pointer to the source data buffer to write to.
- * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Read_Stream_LE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the pipe into the given buffer in big endian,
- * sending full packets to the device as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[out] Buffer Pointer to the source data buffer to write to.
- * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Read_Stream_BE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /** \name Stream functions for EEPROM source/destination data */
- //@{
-
- /** EEPROM buffer source version of \ref Pipe_Write_Stream_LE().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Write_EStream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Pipe_Write_Stream_BE().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Write_EStream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Pipe_Read_Stream_LE().
- *
- * \param[out] Buffer Pointer to the source data buffer to write to.
- * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Read_EStream_LE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Pipe_Read_Stream_BE().
- *
- * \param[out] Buffer Pointer to the source data buffer to write to.
- * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Read_EStream_BE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /** \name Stream functions for PROGMEM source/destination data */
- //@{
-
- /** FLASH buffer source version of \ref Pipe_Write_Stream_LE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Write_PStream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Pipe_Write_Stream_BE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Write_PStream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c deleted file mode 100644 index bf3ff003c..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c +++ /dev/null @@ -1,210 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_AVR8)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#include "../Pipe.h"
-
-uint8_t USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
-
-bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table,
- const uint8_t Entries)
-{
- for (uint8_t i = 0; i < Entries; i++)
- {
- if (!(Table[i].Address))
- continue;
-
- if (!(Pipe_ConfigurePipe(Table[i].Address, Table[i].Type, Table[i].EndpointAddress, Table[i].Size, Table[i].Banks)))
- {
- return false;
- }
- }
-
- return true;
-}
-
-bool Pipe_ConfigurePipe(const uint8_t Address,
- const uint8_t Type,
- const uint8_t EndpointAddress,
- const uint16_t Size,
- const uint8_t Banks)
-{
- uint8_t Number = (Address & PIPE_EPNUM_MASK);
- uint8_t Token = (Address & PIPE_DIR_IN) ? PIPE_TOKEN_IN : PIPE_TOKEN_OUT;
-
- if (Number >= PIPE_TOTAL_PIPES)
- return false;
-
- if (Type == EP_TYPE_CONTROL)
- Token = PIPE_TOKEN_SETUP;
-
-#if defined(ORDERED_EP_CONFIG)
- Pipe_SelectPipe(Number);
- Pipe_EnablePipe();
-
- UPCFG1X = 0;
-
- UPCFG0X = ((Type << EPTYPE0) | Token | ((EndpointAddress & PIPE_EPNUM_MASK) << PEPNUM0));
- UPCFG1X = ((1 << ALLOC) | ((Banks > 1) ? (1 << EPBK0) : 0) | Pipe_BytesToEPSizeMask(Size));
-
- Pipe_SetInfiniteINRequests();
-
- return Pipe_IsConfigured();
-#else
- for (uint8_t PNum = Number; PNum < PIPE_TOTAL_PIPES; PNum++)
- {
- uint8_t UPCFG0XTemp;
- uint8_t UPCFG1XTemp;
- uint8_t UPCFG2XTemp;
- uint8_t UPIENXTemp;
-
- Pipe_SelectPipe(PNum);
-
- if (PNum == Number)
- {
- UPCFG0XTemp = ((Type << EPTYPE0) | Token | ((EndpointAddress & PIPE_EPNUM_MASK) << PEPNUM0));
- UPCFG1XTemp = ((1 << ALLOC) | Banks | Pipe_BytesToEPSizeMask(Size));
- UPCFG2XTemp = 0;
- UPIENXTemp = 0;
- }
- else
- {
- UPCFG0XTemp = UPCFG0X;
- UPCFG1XTemp = UPCFG1X;
- UPCFG2XTemp = UPCFG2X;
- UPIENXTemp = UPIENX;
- }
-
- if (!(UPCFG1XTemp & (1 << ALLOC)))
- continue;
-
- Pipe_DisablePipe();
- UPCFG1X &= ~(1 << ALLOC);
-
- Pipe_EnablePipe();
- UPCFG0X = UPCFG0XTemp;
- UPCFG1X = UPCFG1XTemp;
- UPCFG2X = UPCFG2XTemp;
- UPIENX = UPIENXTemp;
-
- Pipe_SetInfiniteINRequests();
-
- if (!(Pipe_IsConfigured()))
- return false;
- }
-
- Pipe_SelectPipe(Number);
- return true;
-#endif
-}
-
-void Pipe_ClearPipes(void)
-{
- UPINT = 0;
-
- for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++)
- {
- Pipe_SelectPipe(PNum);
- UPIENX = 0;
- UPINTX = 0;
- UPCFG1X = 0;
- Pipe_DisablePipe();
- }
-}
-
-bool Pipe_IsEndpointBound(const uint8_t EndpointAddress)
-{
- uint8_t PrevPipeNumber = Pipe_GetCurrentPipe();
-
- for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++)
- {
- Pipe_SelectPipe(PNum);
-
- if (!(Pipe_IsConfigured()))
- continue;
-
- if (Pipe_GetBoundEndpointAddress() == EndpointAddress)
- return true;
- }
-
- Pipe_SelectPipe(PrevPipeNumber);
- return false;
-}
-
-uint8_t Pipe_WaitUntilReady(void)
-{
- #if (USB_STREAM_TIMEOUT_MS < 0xFF)
- uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
- #else
- uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
- #endif
-
- uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber();
-
- for (;;)
- {
- if (Pipe_GetPipeToken() == PIPE_TOKEN_IN)
- {
- if (Pipe_IsINReceived())
- return PIPE_READYWAIT_NoError;
- }
- else
- {
- if (Pipe_IsOUTReady())
- return PIPE_READYWAIT_NoError;
- }
-
- if (Pipe_IsStalled())
- return PIPE_READYWAIT_PipeStalled;
- else if (USB_HostState == HOST_STATE_Unattached)
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber();
-
- if (CurrentFrameNumber != PreviousFrameNumber)
- {
- PreviousFrameNumber = CurrentFrameNumber;
-
- if (!(TimeoutMSRem--))
- return PIPE_READYWAIT_Timeout;
- }
- }
-}
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h deleted file mode 100644 index 24c7b36cb..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h +++ /dev/null @@ -1,921 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Pipe definitions for the AVR8 microcontrollers.
- * \copydetails Group_PipeManagement_AVR8
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_PipeRW
- * \defgroup Group_PipeRW_AVR8 Pipe Data Reading and Writing (AVR8)
- * \brief Pipe data read/write definitions for the Atmel AVR8 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing from and to pipes.
- */
-
-/** \ingroup Group_PipePrimitiveRW
- * \defgroup Group_PipePrimitiveRW_AVR8 Read/Write of Primitive Data Types (AVR8)
- * \brief Pipe primitive data read/write definitions for the Atmel AVR8 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
- * from and to pipes.
- */
-
-/** \ingroup Group_PipePacketManagement
- * \defgroup Group_PipePacketManagement_AVR8 Pipe Packet Management (AVR8)
- * \brief Pipe packet management definitions for the Atmel AVR8 architecture.
- *
- * Functions, macros, variables, enums and types related to packet management of pipes.
- */
-
-/** \ingroup Group_PipeControlReq
- * \defgroup Group_PipeControlReq_AVR8 Pipe Control Request Management (AVR8)
- * \brief Pipe control request management definitions for the Atmel AVR8 architecture.
- *
- * Module for host mode request processing. This module allows for the transmission of standard, class and
- * vendor control requests to the default control endpoint of an attached device while in host mode.
- *
- * \see Chapter 9 of the USB 2.0 specification.
- */
-
-/** \ingroup Group_PipeManagement
- * \defgroup Group_PipeManagement_AVR8 Pipe Management (AVR8)
- * \brief Pipe management definitions for the Atmel AVR8 architecture.
- *
- * This module contains functions, macros and enums related to pipe management when in USB Host mode. This
- * module contains the pipe management macros, as well as pipe interrupt and data send/receive functions
- * for various data types.
- *
- * @{
- */
-
-#ifndef __PIPE_AVR8_H__
-#define __PIPE_AVR8_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBTask.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name Pipe Error Flag Masks */
- //@{
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */
- #define PIPE_ERRORFLAG_OVERFLOW (1 << 6)
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that an underflow error occurred in the pipe on the received data. */
- #define PIPE_ERRORFLAG_UNDERFLOW (1 << 5)
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that a CRC error occurred in the pipe on the received data. */
- #define PIPE_ERRORFLAG_CRC16 (1 << 4)
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware timeout error occurred in the pipe. */
- #define PIPE_ERRORFLAG_TIMEOUT (1 << 3)
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware PID error occurred in the pipe. */
- #define PIPE_ERRORFLAG_PID (1 << 2)
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data PID error occurred in the pipe. */
- #define PIPE_ERRORFLAG_DATAPID (1 << 1)
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */
- #define PIPE_ERRORFLAG_DATATGL (1 << 0)
- //@}
-
- /** \name Pipe Token Masks */
- //@{
- /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes),
- * which will trigger a control request on the attached device when data is written to the pipe.
- */
- #define PIPE_TOKEN_SETUP (0 << PTOKEN0)
-
- /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a IN token (for non-CONTROL type pipes),
- * indicating that the pipe data will flow from device to host.
- */
- #define PIPE_TOKEN_IN (1 << PTOKEN0)
-
- /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a OUT token (for non-CONTROL type pipes),
- * indicating that the pipe data will flow from host to device.
- */
- #define PIPE_TOKEN_OUT (2 << PTOKEN0)
- //@}
-
- /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value
- * in the device descriptor of the attached device.
- */
- #define PIPE_CONTROLPIPE_DEFAULT_SIZE 64
-
- /** Total number of pipes (including the default control pipe at address 0) which may be used in
- * the device. Different USB AVR models support different amounts of pipes, this value reflects
- * the maximum number of pipes for the currently selected AVR model.
- */
- #define PIPE_TOTAL_PIPES 7
-
- /** Size in bytes of the largest pipe bank size possible in the device. Not all banks on each AVR
- * model supports the largest bank size possible on the device; different pipe numbers support
- * different maximum bank sizes. This value reflects the largest possible bank of any pipe on the
- * currently selected USB AVR model.
- */
- #define PIPE_MAX_SIZE 256
-
- /* Enums: */
- /** Enum for the possible error return codes of the \ref Pipe_WaitUntilReady() function.
- *
- * \ingroup Group_PipeRW_AVR8
- */
- enum Pipe_WaitUntilReady_ErrorCodes_t
- {
- PIPE_READYWAIT_NoError = 0, /**< Pipe ready for next packet, no error. */
- PIPE_READYWAIT_PipeStalled = 1, /**< The device stalled the pipe while waiting. */
- PIPE_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while waiting. */
- PIPE_READYWAIT_Timeout = 3, /**< The device failed to accept or send the next packet
- * within the software timeout period set by the
- * \ref USB_STREAM_TIMEOUT_MS macro.
- */
- };
-
- /* Inline Functions: */
- /** Indicates the number of bytes currently stored in the current pipes's selected bank.
- *
- * \ingroup Group_PipeRW_AVR8
- *
- * \return Total number of bytes in the currently selected pipe's FIFO buffer.
- */
- static inline uint16_t Pipe_BytesInPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Pipe_BytesInPipe(void)
- {
- return UPBCX;
- }
-
- /** Determines the currently selected pipe's direction.
- *
- * \return The currently selected pipe's direction, as a \c PIPE_DIR_* mask.
- */
- static inline uint8_t Pipe_GetPipeDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetPipeDirection(void)
- {
- return (UPCFG0X & (1 << EPDIR)) ? PIPE_DIR_IN : PIPE_DIR_OUT;
- }
-
- /** Returns the pipe address of the currently selected pipe. This is typically used to save the
- * currently selected pipe address so that it can be restored after another pipe has been manipulated.
- *
- * \return Index of the currently selected pipe.
- */
- static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetCurrentPipe(void)
- {
- return ((UPNUM & PIPE_PIPENUM_MASK) | Pipe_GetPipeDirection());
- }
-
- /** Selects the given pipe address. Any pipe operations which do not require the pipe address to be
- * indicated will operate on the currently selected pipe.
- *
- * \param[in] Address Address of the pipe to select.
- */
- static inline void Pipe_SelectPipe(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void Pipe_SelectPipe(const uint8_t Address)
- {
- UPNUM = (Address & PIPE_PIPENUM_MASK);
- }
-
- /** Resets the desired pipe, including the pipe banks and flags.
- *
- * \param[in] Address Address of the pipe to reset.
- */
- static inline void Pipe_ResetPipe(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ResetPipe(const uint8_t Address)
- {
- UPRST = (1 << (Address & PIPE_PIPENUM_MASK));
- UPRST = 0;
- }
-
- /** Enables the currently selected pipe so that data can be sent and received through it to and from
- * an attached device.
- *
- * \pre The currently selected pipe must first be configured properly via \ref Pipe_ConfigurePipe().
- */
- static inline void Pipe_EnablePipe(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_EnablePipe(void)
- {
- UPCONX |= (1 << PEN);
- }
-
- /** Disables the currently selected pipe so that data cannot be sent and received through it to and
- * from an attached device.
- */
- static inline void Pipe_DisablePipe(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_DisablePipe(void)
- {
- UPCONX &= ~(1 << PEN);
- }
-
- /** Determines if the currently selected pipe is enabled, but not necessarily configured.
- *
- * \return Boolean \c true if the currently selected pipe is enabled, \c false otherwise.
- */
- static inline bool Pipe_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsEnabled(void)
- {
- return ((UPCONX & (1 << PEN)) ? true : false);
- }
-
- /** Gets the current pipe token, indicating the pipe's data direction and type.
- *
- * \return The current pipe token, as a \c PIPE_TOKEN_* mask.
- */
- static inline uint8_t Pipe_GetPipeToken(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetPipeToken(void)
- {
- return (UPCFG0X & (0x03 << PTOKEN0));
- }
-
- /** Sets the token for the currently selected pipe to one of the tokens specified by the \c PIPE_TOKEN_*
- * masks. This can be used on CONTROL type pipes, to allow for bidirectional transfer of data during
- * control requests, or on regular pipes to allow for half-duplex bidirectional data transfer to devices
- * which have two endpoints of opposite direction sharing the same endpoint address within the device.
- *
- * \param[in] Token New pipe token to set the selected pipe to, as a \c PIPE_TOKEN_* mask.
- */
- static inline void Pipe_SetPipeToken(const uint8_t Token) ATTR_ALWAYS_INLINE;
- static inline void Pipe_SetPipeToken(const uint8_t Token)
- {
- UPCFG0X = ((UPCFG0X & ~(0x03 << PTOKEN0)) | Token);
- }
-
- /** Configures the currently selected pipe to allow for an unlimited number of IN requests. */
- static inline void Pipe_SetInfiniteINRequests(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_SetInfiniteINRequests(void)
- {
- UPCONX |= (1 << INMODE);
- }
-
- /** Configures the currently selected pipe to only allow the specified number of IN requests to be
- * accepted by the pipe before it is automatically frozen.
- *
- * \param[in] TotalINRequests Total number of IN requests that the pipe may receive before freezing.
- */
- static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests) ATTR_ALWAYS_INLINE;
- static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests)
- {
- UPCONX &= ~(1 << INMODE);
- UPINRQX = TotalINRequests;
- }
-
- /** Determines if the currently selected pipe is configured.
- *
- * \return Boolean \c true if the selected pipe is configured, \c false otherwise.
- */
- static inline bool Pipe_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsConfigured(void)
- {
- return ((UPSTAX & (1 << CFGOK)) ? true : false);
- }
-
- /** Retrieves the endpoint address of the endpoint within the attached device that the currently selected
- * pipe is bound to.
- *
- * \return Endpoint address the currently selected pipe is bound to.
- */
- static inline uint8_t Pipe_GetBoundEndpointAddress(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetBoundEndpointAddress(void)
- {
- uint8_t UPCFG0X_Temp = UPCFG0X;
-
- return (((UPCFG0X_Temp >> PEPNUM0) & PIPE_EPNUM_MASK) | ((UPCFG0X_Temp & PEPNUM1) ? ENDPOINT_DIR_OUT : ENDPOINT_DIR_IN));
- }
-
- /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds.
- *
- * \param[in] Milliseconds Number of milliseconds between each pipe poll.
- */
- static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds) ATTR_ALWAYS_INLINE;
- static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds)
- {
- UPCFG2X = Milliseconds;
- }
-
- /** Returns a mask indicating which pipe's interrupt periods have elapsed, indicating that the pipe should
- * be serviced.
- *
- * \return Mask whose bits indicate which pipes have interrupted.
- */
- static inline uint8_t Pipe_GetPipeInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetPipeInterrupts(void)
- {
- return UPINT;
- }
-
- /** Determines if the specified pipe address has interrupted (valid only for INTERRUPT type
- * pipes).
- *
- * \param[in] Address Address of the pipe whose interrupt flag should be tested.
- *
- * \return Boolean \c true if the specified pipe has interrupted, \c false otherwise.
- */
- static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_HasPipeInterrupted(const uint8_t Address)
- {
- return ((UPINT & (1 << (Address & PIPE_PIPENUM_MASK))) ? true : false);
- }
-
- /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */
- static inline void Pipe_Unfreeze(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Unfreeze(void)
- {
- UPCONX &= ~(1 << PFREEZE);
- }
-
- /** Freezes the selected pipe, preventing it from communicating with an attached device. */
- static inline void Pipe_Freeze(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Freeze(void)
- {
- UPCONX |= (1 << PFREEZE);
- }
-
- /** Determines if the currently selected pipe is frozen, and not able to accept data.
- *
- * \return Boolean \c true if the currently selected pipe is frozen, \c false otherwise.
- */
- static inline bool Pipe_IsFrozen(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsFrozen(void)
- {
- return ((UPCONX & (1 << PFREEZE)) ? true : false);
- }
-
- /** Clears the error flags for the currently selected pipe. */
- static inline void Pipe_ClearError(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearError(void)
- {
- UPERRX = 0;
- UPINTX &= ~(1 << PERRI);
- }
-
- /** Determines if the master pipe error flag is set for the currently selected pipe, indicating that
- * some sort of hardware error has occurred on the pipe.
- *
- * \see \ref Pipe_GetErrorFlags() macro for information on retrieving the exact error flag.
- *
- * \return Boolean \c true if an error has occurred on the selected pipe, \c false otherwise.
- */
- static inline bool Pipe_IsError(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsError(void)
- {
- return ((UPINTX & (1 << PERRI)) ? true : false);
- }
-
- /** Gets a mask of the hardware error flags which have occurred on the currently selected pipe. This
- * value can then be masked against the \c PIPE_ERRORFLAG_* masks to determine what error has occurred.
- *
- * \return Mask comprising of \c PIPE_ERRORFLAG_* bits indicating what error has occurred on the selected pipe.
- */
- static inline uint8_t Pipe_GetErrorFlags(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetErrorFlags(void)
- {
- return ((UPERRX & (PIPE_ERRORFLAG_CRC16 | PIPE_ERRORFLAG_TIMEOUT |
- PIPE_ERRORFLAG_PID | PIPE_ERRORFLAG_DATAPID |
- PIPE_ERRORFLAG_DATATGL)) |
- (UPSTAX & (PIPE_ERRORFLAG_OVERFLOW | PIPE_ERRORFLAG_UNDERFLOW)));
- }
-
- /** Retrieves the number of busy banks in the currently selected pipe, which have been queued for
- * transmission via the \ref Pipe_ClearOUT() command, or are awaiting acknowledgement via the
- * \ref Pipe_ClearIN() command.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- *
- * \return Total number of busy banks in the selected pipe.
- */
- static inline uint8_t Pipe_GetBusyBanks(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetBusyBanks(void)
- {
- return (UPSTAX & (0x03 << NBUSYBK0));
- }
-
- /** Determines if the currently selected pipe may be read from (if data is waiting in the pipe
- * bank and the pipe is an IN direction, or if the bank is not yet full if the pipe is an OUT
- * direction). This function will return false if an error has occurred in the pipe, or if the pipe
- * is an IN direction and no packet (or an empty packet) has been received, or if the pipe is an OUT
- * direction and the pipe bank is full.
- *
- * \note This function is not valid on CONTROL type pipes.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- *
- * \return Boolean \c true if the currently selected pipe may be read from or written to, depending
- * on its direction.
- */
- static inline bool Pipe_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsReadWriteAllowed(void)
- {
- return ((UPINTX & (1 << RWAL)) ? true : false);
- }
-
- /** Determines if a packet has been received on the currently selected IN pipe from the attached device.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- *
- * \return Boolean \c true if the current pipe has received an IN packet, \c false otherwise.
- */
- static inline bool Pipe_IsINReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsINReceived(void)
- {
- return ((UPINTX & (1 << RXINI)) ? true : false);
- }
-
- /** Determines if the currently selected OUT pipe is ready to send an OUT packet to the attached device.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- *
- * \return Boolean \c true if the current pipe is ready for an OUT packet, \c false otherwise.
- */
- static inline bool Pipe_IsOUTReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsOUTReady(void)
- {
- return ((UPINTX & (1 << TXOUTI)) ? true : false);
- }
-
- /** Determines if no SETUP request is currently being sent to the attached device on the selected
- * CONTROL type pipe.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- *
- * \return Boolean \c true if the current pipe is ready for a SETUP packet, \c false otherwise.
- */
- static inline bool Pipe_IsSETUPSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsSETUPSent(void)
- {
- return ((UPINTX & (1 << TXSTPI)) ? true : false);
- }
-
- /** Sends the currently selected CONTROL type pipe's contents to the device as a SETUP packet.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- */
- static inline void Pipe_ClearSETUP(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearSETUP(void)
- {
- UPINTX &= ~((1 << TXSTPI) | (1 << FIFOCON));
- }
-
- /** Acknowledges the reception of a setup IN request from the attached device on the currently selected
- * pipe, freeing the bank ready for the next packet.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- */
- static inline void Pipe_ClearIN(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearIN(void)
- {
- UPINTX &= ~((1 << RXINI) | (1 << FIFOCON));
- }
-
- /** Sends the currently selected pipe's contents to the device as an OUT packet on the selected pipe, freeing
- * the bank ready for the next packet.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- */
- static inline void Pipe_ClearOUT(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearOUT(void)
- {
- UPINTX &= ~((1 << TXOUTI) | (1 << FIFOCON));
- }
-
- /** Determines if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on
- * the currently selected pipe. This occurs when the host sends a packet to the device, but the device
- * is not currently ready to handle the packet (i.e. its endpoint banks are full). Once a NAK has been
- * received, it must be cleared using \ref Pipe_ClearNAKReceived() before the previous (or any other) packet
- * can be re-sent.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- *
- * \return Boolean \c true if an NAK has been received on the current pipe, \c false otherwise.
- */
- static inline bool Pipe_IsNAKReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsNAKReceived(void)
- {
- return ((UPINTX & (1 << NAKEDI)) ? true : false);
- }
-
- /** Clears the NAK condition on the currently selected pipe.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- *
- * \see \ref Pipe_IsNAKReceived() for more details.
- */
- static inline void Pipe_ClearNAKReceived(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearNAKReceived(void)
- {
- UPINTX &= ~(1 << NAKEDI);
- }
-
- /** Determines if the currently selected pipe has had the STALL condition set by the attached device.
- *
- * \ingroup Group_PipePacketManagement_AVR8
- *
- * \return Boolean \c true if the current pipe has been stalled by the attached device, \c false otherwise.
- */
- static inline bool Pipe_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsStalled(void)
- {
- return ((UPINTX & (1 << RXSTALLI)) ? true : false);
- }
-
- /** Clears the STALL condition detection flag on the currently selected pipe, but does not clear the
- * STALL condition itself (this must be done via a ClearFeature control request to the device).
- *
- * \ingroup Group_PipePacketManagement_AVR8
- */
- static inline void Pipe_ClearStall(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearStall(void)
- {
- UPINTX &= ~(1 << RXSTALLI);
- }
-
- /** Reads one byte from the currently selected pipe's bank, for OUT direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- *
- * \return Next byte in the currently selected pipe's FIFO buffer.
- */
- static inline uint8_t Pipe_Read_8(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_Read_8(void)
- {
- return UPDATX;
- }
-
- /** Writes one byte to the currently selected pipe's bank, for IN direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- *
- * \param[in] Data Data to write into the the currently selected pipe's FIFO buffer.
- */
- static inline void Pipe_Write_8(const uint8_t Data) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Write_8(const uint8_t Data)
- {
- UPDATX = Data;
- }
-
- /** Discards one byte from the currently selected pipe's bank, for OUT direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- */
- static inline void Pipe_Discard_8(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Discard_8(void)
- {
- uint8_t Dummy;
-
- Dummy = UPDATX;
-
- (void)Dummy;
- }
-
- /** Reads two bytes from the currently selected pipe's bank in little endian format, for OUT
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- *
- * \return Next two bytes in the currently selected pipe's FIFO buffer.
- */
- static inline uint16_t Pipe_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Pipe_Read_16_LE(void)
- {
- union
- {
- uint16_t Value;
- uint8_t Bytes[2];
- } Data;
-
- Data.Bytes[0] = UPDATX;
- Data.Bytes[1] = UPDATX;
-
- return Data.Value;
- }
-
- /** Reads two bytes from the currently selected pipe's bank in big endian format, for OUT
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- *
- * \return Next two bytes in the currently selected pipe's FIFO buffer.
- */
- static inline uint16_t Pipe_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Pipe_Read_16_BE(void)
- {
- union
- {
- uint16_t Value;
- uint8_t Bytes[2];
- } Data;
-
- Data.Bytes[1] = UPDATX;
- Data.Bytes[0] = UPDATX;
-
- return Data.Value;
- }
-
- /** Writes two bytes to the currently selected pipe's bank in little endian format, for IN
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- *
- * \param[in] Data Data to write to the currently selected pipe's FIFO buffer.
- */
- static inline void Pipe_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Write_16_LE(const uint16_t Data)
- {
- UPDATX = (Data & 0xFF);
- UPDATX = (Data >> 8);
- }
-
- /** Writes two bytes to the currently selected pipe's bank in big endian format, for IN
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- *
- * \param[in] Data Data to write to the currently selected pipe's FIFO buffer.
- */
- static inline void Pipe_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Write_16_BE(const uint16_t Data)
- {
- UPDATX = (Data >> 8);
- UPDATX = (Data & 0xFF);
- }
-
- /** Discards two bytes from the currently selected pipe's bank, for OUT direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- */
- static inline void Pipe_Discard_16(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Discard_16(void)
- {
- uint8_t Dummy;
-
- Dummy = UPDATX;
- Dummy = UPDATX;
-
- (void)Dummy;
- }
-
- /** Reads four bytes from the currently selected pipe's bank in little endian format, for OUT
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- *
- * \return Next four bytes in the currently selected pipe's FIFO buffer.
- */
- static inline uint32_t Pipe_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Pipe_Read_32_LE(void)
- {
- union
- {
- uint32_t Value;
- uint8_t Bytes[4];
- } Data;
-
- Data.Bytes[0] = UPDATX;
- Data.Bytes[1] = UPDATX;
- Data.Bytes[2] = UPDATX;
- Data.Bytes[3] = UPDATX;
-
- return Data.Value;
- }
-
- /** Reads four bytes from the currently selected pipe's bank in big endian format, for OUT
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- *
- * \return Next four bytes in the currently selected pipe's FIFO buffer.
- */
- static inline uint32_t Pipe_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Pipe_Read_32_BE(void)
- {
- union
- {
- uint32_t DWord;
- uint8_t Bytes[4];
- } Data;
-
- Data.Bytes[3] = UPDATX;
- Data.Bytes[2] = UPDATX;
- Data.Bytes[1] = UPDATX;
- Data.Bytes[0] = UPDATX;
-
- return Data.DWord;
- }
-
- /** Writes four bytes to the currently selected pipe's bank in little endian format, for IN
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- *
- * \param[in] Data Data to write to the currently selected pipe's FIFO buffer.
- */
- static inline void Pipe_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Write_32_LE(const uint32_t Data)
- {
- UPDATX = (Data & 0xFF);
- UPDATX = (Data >> 8);
- UPDATX = (Data >> 16);
- UPDATX = (Data >> 24);
- }
-
- /** Writes four bytes to the currently selected pipe's bank in big endian format, for IN
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- *
- * \param[in] Data Data to write to the currently selected pipe's FIFO buffer.
- */
- static inline void Pipe_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Write_32_BE(const uint32_t Data)
- {
- UPDATX = (Data >> 24);
- UPDATX = (Data >> 16);
- UPDATX = (Data >> 8);
- UPDATX = (Data & 0xFF);
- }
-
- /** Discards four bytes from the currently selected pipe's bank, for OUT direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_AVR8
- */
- static inline void Pipe_Discard_32(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Discard_32(void)
- {
- uint8_t Dummy;
-
- Dummy = UPDATX;
- Dummy = UPDATX;
- Dummy = UPDATX;
- Dummy = UPDATX;
-
- (void)Dummy;
- }
-
- /* External Variables: */
- /** Global indicating the maximum packet size of the default control pipe located at address
- * 0 in the device. This value is set to the value indicated in the attached device's device
- * descriptor once the USB interface is initialized into host mode and a device is attached
- * to the USB bus.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- */
- extern uint8_t USB_Host_ControlPipeSize;
-
- /* Function Prototypes: */
- /** Configures a table of pipe descriptions, in sequence. This function can be used to configure multiple
- * pipes at the same time.
- *
- * \note Pipe with a zero address will be ignored, thus this function cannot be used to configure the
- * control pipe.
- *
- * \param[in] Table Pointer to a table of pipe descriptions.
- * \param[in] Entries Number of entries in the pipe table to configure.
- *
- * \return Boolean \c true if all pipes configured successfully, \c false otherwise.
- */
- bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table,
- const uint8_t Entries);
-
- /** Configures the specified pipe address with the given pipe type, endpoint address within the attached device, bank size
- * and number of hardware banks.
- *
- * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze()
- * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or
- * sending data to the device in OUT mode. IN type pipes are also automatically configured to accept infinite
- * numbers of IN requests without automatic freezing - this can be overridden by a call to
- * \ref Pipe_SetFiniteINRequests().
- *
- * \param[in] Address Pipe address to configure.
- *
- * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low
- * Speed USB devices - refer to the USB 2.0 specification.
- *
- * \param[in] EndpointAddress Endpoint address within the attached device that the pipe should interface to.
- *
- * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to
- * the USB device, or after they have been received from the USB device (depending on
- * the pipe's data direction). The bank size must indicate the maximum packet size that
- * the pipe can handle.
- *
- * \param[in] Banks Number of banks to use for the pipe being configured.
- *
- * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Pipes <b>must</b> be configured in ascending order,
- * or bank corruption will occur.
- *
- * \note Certain microcontroller model's pipes may have different maximum packet sizes based on the pipe's
- * index - refer to the chosen microcontroller's datasheet to determine the maximum bank size for each pipe.
- * \n\n
- *
- * \note The default control pipe should not be manually configured by the user application, as it is
- * automatically configured by the library internally.
- * \n\n
- *
- * \note This routine will automatically select the specified pipe upon success. Upon failure, the pipe which
- * failed to reconfigure correctly will be selected.
- *
- * \return Boolean \c true if the configuration succeeded, \c false otherwise.
- */
- bool Pipe_ConfigurePipe(const uint8_t Address,
- const uint8_t Type,
- const uint8_t EndpointAddress,
- const uint16_t Size,
- const uint8_t Banks);
-
- /** Spin-loops until the currently selected non-control pipe is ready for the next packet of data to be read
- * or written to it, aborting in the case of an error condition (such as a timeout or device disconnect).
- *
- * \ingroup Group_PipeRW_AVR8
- *
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t Pipe_WaitUntilReady(void);
-
- /** Determines if a pipe has been bound to the given device endpoint address. If a pipe which is bound to the given
- * endpoint is found, it is automatically selected.
- *
- * \param[in] EndpointAddress Address and direction mask of the endpoint within the attached device to check.
- *
- * \return Boolean \c true if a pipe bound to the given endpoint address of the specified direction is found,
- * \c false otherwise.
- */
- bool Pipe_IsEndpointBound(const uint8_t EndpointAddress) ATTR_WARN_UNUSED_RESULT;
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #if !defined(ENDPOINT_CONTROLEP)
- #define ENDPOINT_CONTROLEP 0
- #endif
-
- /* Inline Functions: */
- static inline uint8_t Pipe_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_BytesToEPSizeMask(const uint16_t Bytes)
- {
- uint8_t MaskVal = 0;
- uint16_t CheckBytes = 8;
-
- while ((CheckBytes < Bytes) && (CheckBytes < PIPE_MAX_SIZE))
- {
- MaskVal++;
- CheckBytes <<= 1;
- }
-
- return (MaskVal << EPSIZE0);
- }
-
- /* Function Prototypes: */
- void Pipe_ClearPipes(void);
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c deleted file mode 100644 index ab69536b0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c +++ /dev/null @@ -1,85 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (void* const Buffer,
- uint16_t Length)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
-
- if (!(Length))
- Endpoint_ClearOUT();
-
- while (Length)
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- else if (Endpoint_IsSETUPReceived())
- return ENDPOINT_RWCSTREAM_HostAborted;
-
- if (Endpoint_IsOUTReceived())
- {
- while (Length && Endpoint_BytesInEndpoint())
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- }
-
- Endpoint_ClearOUT();
- }
- }
-
- while (!(Endpoint_IsINReady()))
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- }
-
- return ENDPOINT_RWCSTREAM_NoError;
-}
-
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_TRANSFER_BYTE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c deleted file mode 100644 index c2d171db0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c +++ /dev/null @@ -1,94 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (const void* const Buffer,
- uint16_t Length)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
- bool LastPacketFull = false;
-
- if (Length > USB_ControlRequest.wLength)
- Length = USB_ControlRequest.wLength;
- else if (!(Length))
- Endpoint_ClearIN();
-
- while (Length || LastPacketFull)
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- else if (Endpoint_IsSETUPReceived())
- return ENDPOINT_RWCSTREAM_HostAborted;
- else if (Endpoint_IsOUTReceived())
- break;
-
- if (Endpoint_IsINReady())
- {
- uint16_t BytesInEndpoint = Endpoint_BytesInEndpoint();
-
- while (Length && (BytesInEndpoint < USB_Device_ControlEndpointSize))
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- BytesInEndpoint++;
- }
-
- LastPacketFull = (BytesInEndpoint == USB_Device_ControlEndpointSize);
- Endpoint_ClearIN();
- }
- }
-
- while (!(Endpoint_IsOUTReceived()))
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- }
-
- return ENDPOINT_RWCSTREAM_NoError;
-}
-
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_TRANSFER_BYTE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c deleted file mode 100644 index 02ad97867..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c +++ /dev/null @@ -1,90 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
- uint16_t BytesInTransfer = 0;
- uint8_t ErrorCode;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- {
- Length -= *BytesProcessed;
- TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed);
- }
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- TEMPLATE_CLEAR_ENDPOINT();
-
- #if !defined(INTERRUPT_CONTROL_ENDPOINT)
- USB_USBTask();
- #endif
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return ENDPOINT_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- BytesInTransfer++;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_BUFFER_TYPE
-#undef TEMPLATE_TRANSFER_BYTE
-#undef TEMPLATE_CLEAR_ENDPOINT
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c deleted file mode 100644 index 05846bb61..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c +++ /dev/null @@ -1,89 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
- uint16_t BytesInTransfer = 0;
- uint8_t ErrorCode;
-
- Pipe_SetPipeToken(TEMPLATE_TOKEN);
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- {
- Length -= *BytesProcessed;
- TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed);
- }
-
- while (Length)
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- TEMPLATE_CLEAR_PIPE();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return PIPE_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- BytesInTransfer++;
- }
- }
-
- return PIPE_RWSTREAM_NoError;
-}
-
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_BUFFER_TYPE
-#undef TEMPLATE_TOKEN
-#undef TEMPLATE_TRANSFER_BYTE
-#undef TEMPLATE_CLEAR_PIPE
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c deleted file mode 100644 index 37b106ab6..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c +++ /dev/null @@ -1,265 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_AVR8)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#define __INCLUDE_FROM_USB_CONTROLLER_C
-#include "../USBController.h"
-
-#if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY))
-volatile uint8_t USB_CurrentMode = USB_MODE_None;
-#endif
-
-#if !defined(USE_STATIC_OPTIONS)
-volatile uint8_t USB_Options;
-#endif
-
-void USB_Init(
- #if defined(USB_CAN_BE_BOTH)
- const uint8_t Mode
- #endif
-
- #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
- ,
- #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
- void
- #endif
-
- #if !defined(USE_STATIC_OPTIONS)
- const uint8_t Options
- #endif
- )
-{
- #if !defined(USE_STATIC_OPTIONS)
- USB_Options = Options;
- #endif
-
- if (!(USB_Options & USB_OPT_REG_DISABLED))
- USB_REG_On();
- else
- USB_REG_Off();
-
- if (!(USB_Options & USB_OPT_MANUAL_PLL))
- {
- #if defined(USB_SERIES_4_AVR)
- PLLFRQ = (1 << PDIV2);
- #endif
- }
-
- #if defined(USB_CAN_BE_BOTH)
- if (Mode == USB_MODE_UID)
- {
- UHWCON |= (1 << UIDE);
- USB_INT_Enable(USB_INT_IDTI);
- USB_CurrentMode = USB_GetUSBModeFromUID();
- }
- else
- {
- UHWCON &= ~(1 << UIDE);
- USB_CurrentMode = Mode;
- }
- #endif
-
- USB_IsInitialized = true;
-
- USB_ResetInterface();
-}
-
-void USB_Disable(void)
-{
- USB_INT_DisableAllInterrupts();
- USB_INT_ClearAllInterrupts();
-
- USB_Detach();
- USB_Controller_Disable();
-
- if (!(USB_Options & USB_OPT_MANUAL_PLL))
- USB_PLL_Off();
-
- USB_REG_Off();
-
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- USB_OTGPAD_Off();
- #endif
-
- #if defined(USB_CAN_BE_BOTH)
- USB_CurrentMode = USB_MODE_None;
- #endif
-
- USB_IsInitialized = false;
-}
-
-void USB_ResetInterface(void)
-{
- #if defined(USB_CAN_BE_BOTH)
- bool UIDModeSelectEnabled = ((UHWCON & (1 << UIDE)) != 0);
- #endif
-
- USB_INT_DisableAllInterrupts();
- USB_INT_ClearAllInterrupts();
-
- USB_Controller_Reset();
-
- #if defined(USB_CAN_BE_BOTH)
- if (UIDModeSelectEnabled)
- USB_INT_Enable(USB_INT_IDTI);
- #endif
-
- USB_CLK_Unfreeze();
-
- if (USB_CurrentMode == USB_MODE_Device)
- {
- #if defined(USB_CAN_BE_DEVICE)
- #if (defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
- UHWCON |= (1 << UIMOD);
- #endif
-
- if (!(USB_Options & USB_OPT_MANUAL_PLL))
- {
- #if defined(USB_SERIES_2_AVR)
- USB_PLL_On();
- while (!(USB_PLL_IsReady()));
- #else
- USB_PLL_Off();
- #endif
- }
-
- USB_Init_Device();
- #endif
- }
- else if (USB_CurrentMode == USB_MODE_Host)
- {
- #if defined(USB_CAN_BE_HOST)
- UHWCON &= ~(1 << UIMOD);
-
- if (!(USB_Options & USB_OPT_MANUAL_PLL))
- {
- #if defined(USB_CAN_BE_HOST)
- USB_PLL_On();
- while (!(USB_PLL_IsReady()));
- #endif
- }
-
- USB_Init_Host();
- #endif
- }
-
- #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
- USB_OTGPAD_On();
- #endif
-}
-
-#if defined(USB_CAN_BE_DEVICE)
-static void USB_Init_Device(void)
-{
- USB_DeviceState = DEVICE_STATE_Unattached;
- USB_Device_ConfigurationNumber = 0;
-
- #if !defined(NO_DEVICE_REMOTE_WAKEUP)
- USB_Device_RemoteWakeupEnabled = false;
- #endif
-
- #if !defined(NO_DEVICE_SELF_POWER)
- USB_Device_CurrentlySelfPowered = false;
- #endif
-
- #if !defined(FIXED_CONTROL_ENDPOINT_SIZE)
- USB_Descriptor_Device_t* DeviceDescriptorPtr;
-
- #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \
- !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
- uint8_t DescriptorAddressSpace;
-
- if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr, &DescriptorAddressSpace) != NO_DESCRIPTOR)
- {
- if (DescriptorAddressSpace == MEMSPACE_FLASH)
- USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
- else if (DescriptorAddressSpace == MEMSPACE_EEPROM)
- USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
- else
- USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
- }
- #else
- if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
- {
- #if defined(USE_RAM_DESCRIPTORS)
- USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
- #elif defined(USE_EEPROM_DESCRIPTORS)
- USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
- #else
- USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
- #endif
- }
- #endif
- #endif
-
- #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
- if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
- USB_Device_SetLowSpeed();
- else
- USB_Device_SetFullSpeed();
-
- USB_INT_Enable(USB_INT_VBUSTI);
- #endif
-
- Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
- USB_Device_ControlEndpointSize, 1);
-
- USB_INT_Clear(USB_INT_SUSPI);
- USB_INT_Enable(USB_INT_SUSPI);
- USB_INT_Enable(USB_INT_EORSTI);
-
- USB_Attach();
-}
-#endif
-
-#if defined(USB_CAN_BE_HOST)
-static void USB_Init_Host(void)
-{
- USB_HostState = HOST_STATE_Unattached;
- USB_Host_ConfigurationNumber = 0;
- USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
-
- USB_Host_HostMode_On();
-
- USB_Host_VBUS_Auto_Off();
- USB_Host_VBUS_Manual_Enable();
- USB_Host_VBUS_Manual_On();
-
- USB_INT_Enable(USB_INT_SRPI);
- USB_INT_Enable(USB_INT_BCERRI);
-
- USB_Attach();
-}
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h deleted file mode 100644 index e479d7a1a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.h +++ /dev/null @@ -1,436 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Controller definitions for the AVR8 microcontrollers.
- * \copydetails Group_USBManagement_AVR8
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USBManagement
- * \defgroup Group_USBManagement_AVR8 USB Interface Management (AVR8)
- * \brief USB Controller definitions for the AVR8 microcontrollers.
- *
- * Functions, macros, variables, enums and types related to the setup and management of the USB interface.
- *
- * @{
- */
-
-#ifndef __USBCONTROLLER_AVR8_H__
-#define __USBCONTROLLER_AVR8_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBMode.h"
- #include "../Events.h"
- #include "../USBTask.h"
- #include "../USBInterrupt.h"
-
- #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)
- #include "../Host.h"
- #include "../OTG.h"
- #include "../Pipe.h"
- #include "../HostStandardReq.h"
- #include "../PipeStream.h"
- #endif
-
- #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)
- #include "../Device.h"
- #include "../Endpoint.h"
- #include "../DeviceStandardReq.h"
- #include "../EndpointStream.h"
- #endif
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks and Defines: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- #if !defined(F_USB)
- #error F_USB is not defined. You must define F_USB to the frequency of the unprescaled USB controller clock in your project makefile.
- #endif
-
- #if (F_USB == 8000000)
- #if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || \
- defined(__AVR_ATmega8U2__) || defined(__AVR_ATmega16U2__) || \
- defined(__AVR_ATmega32U2__))
- #define USB_PLL_PSC 0
- #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
- #define USB_PLL_PSC 0
- #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__) || defined(__AVR_ATmega32U6__))
- #define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0))
- #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))
- #define USB_PLL_PSC ((1 << PLLP1) | (1 << PLLP0))
- #endif
- #elif (F_USB == 16000000)
- #if (defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || \
- defined(__AVR_ATmega8U2__) || defined(__AVR_ATmega16U2__) || \
- defined(__AVR_ATmega32U2__))
- #define USB_PLL_PSC (1 << PLLP0)
- #elif (defined(__AVR_ATmega16U4__) || defined(__AVR_ATmega32U4__))
- #define USB_PLL_PSC (1 << PINDIV)
- #elif (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_ATmega32U6__))
- #define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP1))
- #elif (defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__))
- #define USB_PLL_PSC ((1 << PLLP2) | (1 << PLLP0))
- #endif
- #endif
-
- #if !defined(USB_PLL_PSC)
- #error No PLL prescale value available for chosen F_USB value and AVR model.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name USB Controller Option Masks */
- //@{
- /** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
- * regulator should be disabled and the AVR's VCC level used for the data pads.
- *
- * \note See USB AVR data sheet for more information on the internal pad regulator.
- */
- #define USB_OPT_REG_DISABLED (1 << 1)
-
- /** Regulator enable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad
- * regulator should be enabled to regulate the data pin voltages from the VBUS level down to a level within
- * the range allowable by the USB standard.
- *
- * \note See USB AVR data sheet for more information on the internal pad regulator.
- */
- #define USB_OPT_REG_ENABLED (0 << 1)
-
- /** Manual PLL control option mask for \ref USB_Init(). This indicates to the library that the user application
- * will take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock
- * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations.
- */
- #define USB_OPT_MANUAL_PLL (1 << 2)
-
- /** Automatic PLL control option mask for \ref USB_Init(). This indicates to the library that the library should
- * take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock
- * that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations.
- */
- #define USB_OPT_AUTO_PLL (0 << 2)
- //@}
-
- #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
- /** Constant for the maximum software timeout period of the USB data stream transfer functions
- * (both control and standard) when in either device or host mode. If the next packet of a stream
- * is not received or acknowledged within this time period, the stream function will fail.
- *
- * This value may be overridden in the user project makefile as the value of the
- * \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch.
- */
- #define USB_STREAM_TIMEOUT_MS 100
- #endif
-
- /* Inline Functions: */
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)
- /** Determines if the VBUS line is currently high (i.e. the USB host is supplying power).
- *
- * \note This function is not available on some AVR models which do not support hardware VBUS monitoring.
- *
- * \return Boolean \c true if the VBUS line is currently detecting power from a host, \c false otherwise.
- */
- static inline bool USB_VBUS_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_VBUS_GetStatus(void)
- {
- return ((USBSTA & (1 << VBUS)) ? true : false);
- }
- #endif
-
- /** Detaches the device from the USB bus. This has the effect of removing the device from any
- * attached host, ceasing USB communications. If no host is present, this prevents any host from
- * enumerating the device once attached until \ref USB_Attach() is called.
- */
- static inline void USB_Detach(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Detach(void)
- {
- UDCON |= (1 << DETACH);
- }
-
- /** Attaches the device to the USB bus. This announces the device's presence to any attached
- * USB host, starting the enumeration process. If no host is present, attaching the device
- * will allow for enumeration once a host is connected to the device.
- *
- * This is inexplicably also required for proper operation while in host mode, to enable the
- * attachment of a device to the host. This is despite the bit being located in the device-mode
- * register and despite the datasheet making no mention of its requirement in host mode.
- */
- static inline void USB_Attach(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Attach(void)
- {
- UDCON &= ~(1 << DETACH);
- }
-
- /* Function Prototypes: */
- /** Main function to initialize and start the USB interface. Once active, the USB interface will
- * allow for device connection to a host when in device mode, or for device enumeration while in
- * host mode.
- *
- * As the USB library relies on interrupts for the device and host mode enumeration processes,
- * the user must enable global interrupts before or shortly after this function is called. In
- * device mode, interrupts must be enabled within 500ms of this function being called to ensure
- * that the host does not time out whilst enumerating the device. In host mode, interrupts may be
- * enabled at the application's leisure however enumeration will not begin of an attached device
- * until after this has occurred.
- *
- * Calling this function when the USB interface is already initialized will cause a complete USB
- * interface reset and re-enumeration.
- *
- * \param[in] Mode This is a mask indicating what mode the USB interface is to be initialized to, a value
- * from the \ref USB_Modes_t enum.
- *
- * \param[in] Options Mask indicating the options which should be used when initializing the USB
- * interface to control the USB interface's behavior. This should be comprised of
- * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
- * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
- * mode speed.
- *
- * \note To reduce the FLASH requirements of the library if only device or host mode is required,
- * the mode can be statically set in the project makefile by defining the token \c USB_DEVICE_ONLY
- * (for device mode) or \c USB_HOST_ONLY (for host mode), passing the token to the compiler
- * via the -D switch. If the mode is statically set, this parameter does not exist in the
- * function prototype.
- * \n\n
- *
- * \note To reduce the FLASH requirements of the library if only fixed settings are required,
- * the options may be set statically in the same manner as the mode (see the Mode parameter of
- * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token,
- * defined to the appropriate options masks. When the options are statically set, this
- * parameter does not exist in the function prototype.
- * \n\n
- *
- * \note The mode parameter does not exist on devices where only one mode is possible, such as USB
- * AVR models which only implement the USB device mode in hardware.
- *
- * \see \ref Group_Device for the \c USB_DEVICE_OPT_* masks.
- */
- void USB_Init(
- #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)
- const uint8_t Mode
- #endif
-
- #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__)
- ,
- #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
- void
- #endif
-
- #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__)
- const uint8_t Options
- #endif
- );
-
- /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO
- * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface
- * is restarted with the \ref USB_Init() function.
- */
- void USB_Disable(void);
-
- /** Resets the interface, when already initialized. This will re-enumerate the device if already connected
- * to a host, or re-enumerate an already attached device when in host mode.
- */
- void USB_ResetInterface(void);
-
- /* Global Variables: */
- #if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__)
- /** Indicates the mode that the USB interface is currently initialized to, a value from the
- * \ref USB_Modes_t enum.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- *
- * \note When the controller is initialized into UID auto-detection mode, this variable will hold the
- * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller
- * is fixed into a specific mode (either through the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY compile time
- * options, or a limitation of the USB controller in the chosen device model) this will evaluate to
- * a constant of the appropriate value and will never evaluate to \ref USB_MODE_None even when the
- * USB interface is not initialized.
- */
- extern volatile uint8_t USB_CurrentMode;
- #elif defined(USB_HOST_ONLY)
- #define USB_CurrentMode USB_MODE_Host
- #elif defined(USB_DEVICE_ONLY)
- #define USB_CurrentMode USB_MODE_Device
- #endif
-
- #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__)
- /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init()
- * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- */
- extern volatile uint8_t USB_Options;
- #elif defined(USE_STATIC_OPTIONS)
- #define USB_Options USE_STATIC_OPTIONS
- #endif
-
- /* Enums: */
- /** Enum for the possible USB controller modes, for initialization via \ref USB_Init() and indication back to the
- * user application via \ref USB_CurrentMode.
- */
- enum USB_Modes_t
- {
- USB_MODE_None = 0, /**< Indicates that the controller is currently not initialized in any specific USB mode. */
- USB_MODE_Device = 1, /**< Indicates that the controller is currently initialized in USB Device mode. */
- USB_MODE_Host = 2, /**< Indicates that the controller is currently initialized in USB Host mode. */
- USB_MODE_UID = 3, /**< Indicates that the controller should determine the USB mode from the UID pin of the
- * USB connector.
- */
- };
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_USB_CONTROLLER_C)
- #if defined(USB_CAN_BE_DEVICE)
- static void USB_Init_Device(void);
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- static void USB_Init_Host(void);
- #endif
- #endif
-
- /* Inline Functions: */
- static inline void USB_PLL_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_PLL_On(void)
- {
- PLLCSR = USB_PLL_PSC;
- PLLCSR = (USB_PLL_PSC | (1 << PLLE));
- }
-
- static inline void USB_PLL_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_PLL_Off(void)
- {
- PLLCSR = 0;
- }
-
- static inline bool USB_PLL_IsReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_PLL_IsReady(void)
- {
- return ((PLLCSR & (1 << PLOCK)) ? true : false);
- }
-
- static inline void USB_REG_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_REG_On(void)
- {
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- UHWCON |= (1 << UVREGE);
- #else
- REGCR &= ~(1 << REGDIS);
- #endif
- }
-
- static inline void USB_REG_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_REG_Off(void)
- {
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- UHWCON &= ~(1 << UVREGE);
- #else
- REGCR |= (1 << REGDIS);
- #endif
- }
-
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- static inline void USB_OTGPAD_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_OTGPAD_On(void)
- {
- USBCON |= (1 << OTGPADE);
- }
-
- static inline void USB_OTGPAD_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_OTGPAD_Off(void)
- {
- USBCON &= ~(1 << OTGPADE);
- }
- #endif
-
- static inline void USB_CLK_Freeze(void) ATTR_ALWAYS_INLINE;
- static inline void USB_CLK_Freeze(void)
- {
- USBCON |= (1 << FRZCLK);
- }
-
- static inline void USB_CLK_Unfreeze(void) ATTR_ALWAYS_INLINE;
- static inline void USB_CLK_Unfreeze(void)
- {
- USBCON &= ~(1 << FRZCLK);
- }
-
- static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Controller_Enable(void)
- {
- USBCON |= (1 << USBE);
- }
-
- static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Controller_Disable(void)
- {
- USBCON &= ~(1 << USBE);
- }
-
- static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Controller_Reset(void)
- {
- USBCON &= ~(1 << USBE);
- USBCON |= (1 << USBE);
- }
-
- #if defined(USB_CAN_BE_BOTH)
- static inline uint8_t USB_GetUSBModeFromUID(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t USB_GetUSBModeFromUID(void)
- {
- if (USBSTA & (1 << ID))
- return USB_MODE_Device;
- else
- return USB_MODE_Host;
- }
- #endif
-
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c deleted file mode 100644 index 3bff19f2e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.c +++ /dev/null @@ -1,279 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_AVR8)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBInterrupt.h"
-
-void USB_INT_DisableAllInterrupts(void)
-{
- #if defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- USBCON &= ~((1 << VBUSTE) | (1 << IDTE));
- #elif defined(USB_SERIES_4_AVR)
- USBCON &= ~(1 << VBUSTE);
- #endif
-
- #if defined(USB_CAN_BE_BOTH)
- OTGIEN = 0;
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- UHIEN = 0;
- #endif
-
- #if defined(USB_CAN_BE_DEVICE)
- UDIEN = 0;
- #endif
-}
-
-void USB_INT_ClearAllInterrupts(void)
-{
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- USBINT = 0;
- #endif
-
- #if defined(USB_CAN_BE_BOTH)
- OTGINT = 0;
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- UHINT = 0;
- #endif
-
- #if defined(USB_CAN_BE_DEVICE)
- UDINT = 0;
- #endif
-}
-
-ISR(USB_GEN_vect, ISR_BLOCK)
-{
- #if defined(USB_CAN_BE_DEVICE)
- #if !defined(NO_SOF_EVENTS)
- if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI))
- {
- USB_INT_Clear(USB_INT_SOFI);
-
- EVENT_USB_Device_StartOfFrame();
- }
- #endif
-
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- if (USB_INT_HasOccurred(USB_INT_VBUSTI) && USB_INT_IsEnabled(USB_INT_VBUSTI))
- {
- USB_INT_Clear(USB_INT_VBUSTI);
-
- if (USB_VBUS_GetStatus())
- {
- if (!(USB_Options & USB_OPT_MANUAL_PLL))
- {
- USB_PLL_On();
- while (!(USB_PLL_IsReady()));
- }
-
- USB_DeviceState = DEVICE_STATE_Powered;
- EVENT_USB_Device_Connect();
- }
- else
- {
- if (!(USB_Options & USB_OPT_MANUAL_PLL))
- USB_PLL_Off();
-
- USB_DeviceState = DEVICE_STATE_Unattached;
- EVENT_USB_Device_Disconnect();
- }
- }
- #endif
-
- if (USB_INT_HasOccurred(USB_INT_SUSPI) && USB_INT_IsEnabled(USB_INT_SUSPI))
- {
- USB_INT_Disable(USB_INT_SUSPI);
- USB_INT_Enable(USB_INT_WAKEUPI);
-
- USB_CLK_Freeze();
-
- if (!(USB_Options & USB_OPT_MANUAL_PLL))
- USB_PLL_Off();
-
- #if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
- USB_DeviceState = DEVICE_STATE_Unattached;
- EVENT_USB_Device_Disconnect();
- #else
- USB_DeviceState = DEVICE_STATE_Suspended;
- EVENT_USB_Device_Suspend();
- #endif
- }
-
- if (USB_INT_HasOccurred(USB_INT_WAKEUPI) && USB_INT_IsEnabled(USB_INT_WAKEUPI))
- {
- if (!(USB_Options & USB_OPT_MANUAL_PLL))
- {
- USB_PLL_On();
- while (!(USB_PLL_IsReady()));
- }
-
- USB_CLK_Unfreeze();
-
- USB_INT_Clear(USB_INT_WAKEUPI);
-
- USB_INT_Disable(USB_INT_WAKEUPI);
- USB_INT_Enable(USB_INT_SUSPI);
-
- if (USB_Device_ConfigurationNumber)
- USB_DeviceState = DEVICE_STATE_Configured;
- else
- USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered;
-
- #if defined(USB_SERIES_2_AVR) && !defined(NO_LIMITED_CONTROLLER_CONNECT)
- EVENT_USB_Device_Connect();
- #else
- EVENT_USB_Device_WakeUp();
- #endif
- }
-
- if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI))
- {
- USB_INT_Clear(USB_INT_EORSTI);
-
- USB_DeviceState = DEVICE_STATE_Default;
- USB_Device_ConfigurationNumber = 0;
-
- USB_INT_Clear(USB_INT_SUSPI);
- USB_INT_Disable(USB_INT_SUSPI);
- USB_INT_Enable(USB_INT_WAKEUPI);
-
- Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
- USB_Device_ControlEndpointSize, 1);
-
- #if defined(INTERRUPT_CONTROL_ENDPOINT)
- USB_INT_Enable(USB_INT_RXSTPI);
- #endif
-
- EVENT_USB_Device_Reset();
- }
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- #if !defined(NO_SOF_EVENTS)
- if (USB_INT_HasOccurred(USB_INT_HSOFI) && USB_INT_IsEnabled(USB_INT_HSOFI))
- {
- USB_INT_Clear(USB_INT_HSOFI);
-
- EVENT_USB_Host_StartOfFrame();
- }
- #endif
-
- if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI))
- {
- USB_INT_Clear(USB_INT_DDISCI);
- USB_INT_Clear(USB_INT_DCONNI);
- USB_INT_Disable(USB_INT_DDISCI);
-
- EVENT_USB_Host_DeviceUnattached();
-
- USB_ResetInterface();
- }
-
- if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI))
- {
- USB_INT_Clear(USB_INT_VBERRI);
-
- USB_Host_VBUS_Manual_Off();
- USB_Host_VBUS_Auto_Off();
-
- EVENT_USB_Host_HostError(HOST_ERROR_VBusVoltageDip);
- EVENT_USB_Host_DeviceUnattached();
-
- USB_HostState = HOST_STATE_Unattached;
- }
-
- if (USB_INT_HasOccurred(USB_INT_SRPI) && USB_INT_IsEnabled(USB_INT_SRPI))
- {
- USB_INT_Clear(USB_INT_SRPI);
- USB_INT_Disable(USB_INT_SRPI);
-
- EVENT_USB_Host_DeviceAttached();
-
- USB_INT_Enable(USB_INT_DDISCI);
-
- USB_HostState = HOST_STATE_Powered;
- }
-
- if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI))
- {
- USB_INT_Clear(USB_INT_BCERRI);
-
- EVENT_USB_Host_DeviceEnumerationFailed(HOST_ENUMERROR_NoDeviceDetected, 0);
- EVENT_USB_Host_DeviceUnattached();
-
- USB_ResetInterface();
- }
- #endif
-
- #if defined(USB_CAN_BE_BOTH)
- if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI))
- {
- USB_INT_Clear(USB_INT_IDTI);
-
- if (USB_DeviceState != DEVICE_STATE_Unattached)
- EVENT_USB_Device_Disconnect();
-
- if (USB_HostState != HOST_STATE_Unattached)
- EVENT_USB_Host_DeviceUnattached();
-
- USB_CurrentMode = USB_GetUSBModeFromUID();
- USB_ResetInterface();
-
- EVENT_USB_UIDChange();
- }
- #endif
-}
-
-#if defined(INTERRUPT_CONTROL_ENDPOINT) && defined(USB_CAN_BE_DEVICE)
-ISR(USB_COM_vect, ISR_BLOCK)
-{
- uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();
-
- Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
- USB_INT_Disable(USB_INT_RXSTPI);
-
- GlobalInterruptEnable();
-
- USB_Device_ProcessControlRequest();
-
- Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
- USB_INT_Enable(USB_INT_RXSTPI);
- Endpoint_SelectEndpoint(PrevSelectedEndpoint);
-}
-#endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h deleted file mode 100644 index 9e9210ec2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h +++ /dev/null @@ -1,369 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Controller Interrupt definitions for the AVR8 microcontrollers.
- *
- * This file contains definitions required for the correct handling of low level USB service routine interrupts
- * from the USB controller.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-#ifndef __USBINTERRUPT_AVR8_H__
-#define __USBINTERRUPT_AVR8_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Enums: */
- enum USB_Interrupts_t
- {
- #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__))
- USB_INT_VBUSTI = 0,
- #endif
- #if (defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__))
- USB_INT_IDTI = 1,
- #endif
- #if (defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__))
- USB_INT_WAKEUPI = 2,
- USB_INT_SUSPI = 3,
- USB_INT_EORSTI = 4,
- USB_INT_SOFI = 5,
- USB_INT_RXSTPI = 6,
- #endif
- #if (defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__))
- USB_INT_HSOFI = 7,
- USB_INT_DCONNI = 8,
- USB_INT_DDISCI = 9,
- USB_INT_RSTI = 10,
- USB_INT_BCERRI = 11,
- USB_INT_VBERRI = 12,
- USB_INT_SRPI = 13,
- #endif
- };
-
- /* Inline Functions: */
- static inline void USB_INT_Enable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE;
- static inline void USB_INT_Enable(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
- case USB_INT_VBUSTI:
- USBCON |= (1 << VBUSTE);
- break;
- #endif
- #if defined(USB_CAN_BE_BOTH)
- case USB_INT_IDTI:
- USBCON |= (1 << IDTE);
- break;
- #endif
- #if defined(USB_CAN_BE_DEVICE)
- case USB_INT_WAKEUPI:
- UDIEN |= (1 << WAKEUPE);
- break;
- case USB_INT_SUSPI:
- UDIEN |= (1 << SUSPE);
- break;
- case USB_INT_EORSTI:
- UDIEN |= (1 << EORSTE);
- break;
- case USB_INT_SOFI:
- UDIEN |= (1 << SOFE);
- break;
- case USB_INT_RXSTPI:
- UEIENX |= (1 << RXSTPE);
- break;
- #endif
- #if defined(USB_CAN_BE_HOST)
- case USB_INT_HSOFI:
- UHIEN |= (1 << HSOFE);
- break;
- case USB_INT_DCONNI:
- UHIEN |= (1 << DCONNE);
- break;
- case USB_INT_DDISCI:
- UHIEN |= (1 << DDISCE);
- break;
- case USB_INT_RSTI:
- UHIEN |= (1 << RSTE);
- break;
- case USB_INT_BCERRI:
- OTGIEN |= (1 << BCERRE);
- break;
- case USB_INT_VBERRI:
- OTGIEN |= (1 << VBERRE);
- break;
- case USB_INT_SRPI:
- OTGIEN |= (1 << SRPE);
- break;
- #endif
- }
- }
-
- static inline void USB_INT_Disable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE;
- static inline void USB_INT_Disable(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
- case USB_INT_VBUSTI:
- USBCON &= ~(1 << VBUSTE);
- break;
- #endif
- #if defined(USB_CAN_BE_BOTH)
- case USB_INT_IDTI:
- USBCON &= ~(1 << IDTE);
- break;
- #endif
- #if defined(USB_CAN_BE_DEVICE)
- case USB_INT_WAKEUPI:
- UDIEN &= ~(1 << WAKEUPE);
- break;
- case USB_INT_SUSPI:
- UDIEN &= ~(1 << SUSPE);
- break;
- case USB_INT_EORSTI:
- UDIEN &= ~(1 << EORSTE);
- break;
- case USB_INT_SOFI:
- UDIEN &= ~(1 << SOFE);
- break;
- case USB_INT_RXSTPI:
- UEIENX &= ~(1 << RXSTPE);
- break;
- #endif
- #if defined(USB_CAN_BE_HOST)
- case USB_INT_HSOFI:
- UHIEN &= ~(1 << HSOFE);
- break;
- case USB_INT_DCONNI:
- UHIEN &= ~(1 << DCONNE);
- break;
- case USB_INT_DDISCI:
- UHIEN &= ~(1 << DDISCE);
- break;
- case USB_INT_RSTI:
- UHIEN &= ~(1 << RSTE);
- break;
- case USB_INT_BCERRI:
- OTGIEN &= ~(1 << BCERRE);
- break;
- case USB_INT_VBERRI:
- OTGIEN &= ~(1 << VBERRE);
- break;
- case USB_INT_SRPI:
- OTGIEN &= ~(1 << SRPE);
- break;
- #endif
- }
- }
-
- static inline void USB_INT_Clear(const uint8_t Interrupt) ATTR_ALWAYS_INLINE;
- static inline void USB_INT_Clear(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
- case USB_INT_VBUSTI:
- USBINT &= ~(1 << VBUSTI);
- break;
- #endif
- #if defined(USB_CAN_BE_BOTH)
- case USB_INT_IDTI:
- USBINT &= ~(1 << IDTI);
- break;
- #endif
- #if defined(USB_CAN_BE_DEVICE)
- case USB_INT_WAKEUPI:
- UDINT &= ~(1 << WAKEUPI);
- break;
- case USB_INT_SUSPI:
- UDINT &= ~(1 << SUSPI);
- break;
- case USB_INT_EORSTI:
- UDINT &= ~(1 << EORSTI);
- break;
- case USB_INT_SOFI:
- UDINT &= ~(1 << SOFI);
- break;
- case USB_INT_RXSTPI:
- UEINTX &= ~(1 << RXSTPI);
- break;
- #endif
- #if defined(USB_CAN_BE_HOST)
- case USB_INT_HSOFI:
- UHINT &= ~(1 << HSOFI);
- break;
- case USB_INT_DCONNI:
- UHINT &= ~(1 << DCONNI);
- break;
- case USB_INT_DDISCI:
- UHINT &= ~(1 << DDISCI);
- break;
- case USB_INT_RSTI:
- UHINT &= ~(1 << RSTI);
- break;
- case USB_INT_BCERRI:
- OTGINT &= ~(1 << BCERRI);
- break;
- case USB_INT_VBERRI:
- OTGINT &= ~(1 << VBERRI);
- break;
- case USB_INT_SRPI:
- OTGINT &= ~(1 << SRPI);
- break;
- #endif
- }
- }
-
- static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline bool USB_INT_IsEnabled(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
- case USB_INT_VBUSTI:
- return (USBCON & (1 << VBUSTE));
- #endif
- #if defined(USB_CAN_BE_BOTH)
- case USB_INT_IDTI:
- return (USBCON & (1 << IDTE));
- #endif
- #if defined(USB_CAN_BE_DEVICE)
- case USB_INT_WAKEUPI:
- return (UDIEN & (1 << WAKEUPE));
- case USB_INT_SUSPI:
- return (UDIEN & (1 << SUSPE));
- case USB_INT_EORSTI:
- return (UDIEN & (1 << EORSTE));
- case USB_INT_SOFI:
- return (UDIEN & (1 << SOFE));
- case USB_INT_RXSTPI:
- return (UEIENX & (1 << RXSTPE));
- #endif
- #if defined(USB_CAN_BE_HOST)
- case USB_INT_HSOFI:
- return (UHIEN & (1 << HSOFE));
- case USB_INT_DCONNI:
- return (UHIEN & (1 << DCONNE));
- case USB_INT_DDISCI:
- return (UHIEN & (1 << DDISCE));
- case USB_INT_RSTI:
- return (UHIEN & (1 << RSTE));
- case USB_INT_BCERRI:
- return (OTGIEN & (1 << BCERRE));
- case USB_INT_VBERRI:
- return (OTGIEN & (1 << VBERRE));
- case USB_INT_SRPI:
- return (OTGIEN & (1 << SRPE));
- #endif
- }
-
- return false;
- }
-
- static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline bool USB_INT_HasOccurred(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
- case USB_INT_VBUSTI:
- return (USBINT & (1 << VBUSTI));
- #endif
- #if defined(USB_CAN_BE_BOTH)
- case USB_INT_IDTI:
- return (USBINT & (1 << IDTI));
- #endif
- #if defined(USB_CAN_BE_DEVICE)
- case USB_INT_WAKEUPI:
- return (UDINT & (1 << WAKEUPI));
- case USB_INT_SUSPI:
- return (UDINT & (1 << SUSPI));
- case USB_INT_EORSTI:
- return (UDINT & (1 << EORSTI));
- case USB_INT_SOFI:
- return (UDINT & (1 << SOFI));
- case USB_INT_RXSTPI:
- return (UEINTX & (1 << RXSTPI));
- #endif
- #if defined(USB_CAN_BE_HOST)
- case USB_INT_HSOFI:
- return (UHINT & (1 << HSOFI));
- case USB_INT_DCONNI:
- return (UHINT & (1 << DCONNI));
- case USB_INT_DDISCI:
- return (UHINT & (1 << DDISCI));
- case USB_INT_RSTI:
- return (UHINT & (1 << RSTI));
- case USB_INT_BCERRI:
- return (OTGINT & (1 << BCERRI));
- case USB_INT_VBERRI:
- return (OTGINT & (1 << VBERRI));
- case USB_INT_SRPI:
- return (OTGINT & (1 << SRPI));
- #endif
- }
-
- return false;
- }
-
- /* Includes: */
- #include "../USBMode.h"
- #include "../Events.h"
- #include "../USBController.h"
-
- /* Function Prototypes: */
- void USB_INT_ClearAllInterrupts(void);
- void USB_INT_DisableAllInterrupts(void);
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/ConfigDescriptors.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/ConfigDescriptors.c deleted file mode 100644 index 71cced874..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/ConfigDescriptors.c +++ /dev/null @@ -1,146 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "ConfigDescriptors.h"
-
-#if defined(USB_CAN_BE_HOST)
-uint8_t USB_Host_GetDeviceConfigDescriptor(const uint8_t ConfigNumber,
- uint16_t* const ConfigSizePtr,
- void* const BufferPtr,
- const uint16_t BufferSize)
-{
- uint8_t ErrorCode;
- uint8_t ConfigHeader[sizeof(USB_Descriptor_Configuration_Header_t)];
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
- .bRequest = REQ_GetDescriptor,
- .wValue = ((DTYPE_Configuration << 8) | (ConfigNumber - 1)),
- .wIndex = 0,
- .wLength = sizeof(USB_Descriptor_Configuration_Header_t),
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- if ((ErrorCode = USB_Host_SendControlRequest(ConfigHeader)) != HOST_SENDCONTROL_Successful)
- return ErrorCode;
-
- *ConfigSizePtr = le16_to_cpu(DESCRIPTOR_PCAST(ConfigHeader, USB_Descriptor_Configuration_Header_t)->TotalConfigurationSize);
-
- if (*ConfigSizePtr > BufferSize)
- return HOST_GETCONFIG_BuffOverflow;
-
- USB_ControlRequest.wLength = *ConfigSizePtr;
-
- if ((ErrorCode = USB_Host_SendControlRequest(BufferPtr)) != HOST_SENDCONTROL_Successful)
- return ErrorCode;
-
- if (DESCRIPTOR_TYPE(BufferPtr) != DTYPE_Configuration)
- return HOST_GETCONFIG_InvalidData;
-
- return HOST_GETCONFIG_Successful;
-}
-#endif
-
-void USB_GetNextDescriptorOfType(uint16_t* const BytesRem,
- void** const CurrConfigLoc,
- const uint8_t Type)
-{
- while (*BytesRem)
- {
- USB_GetNextDescriptor(BytesRem, CurrConfigLoc);
-
- if (DESCRIPTOR_TYPE(*CurrConfigLoc) == Type)
- return;
- }
-}
-
-void USB_GetNextDescriptorOfTypeBefore(uint16_t* const BytesRem,
- void** const CurrConfigLoc,
- const uint8_t Type,
- const uint8_t BeforeType)
-{
- while (*BytesRem)
- {
- USB_GetNextDescriptor(BytesRem, CurrConfigLoc);
-
- if (DESCRIPTOR_TYPE(*CurrConfigLoc) == Type)
- {
- return;
- }
- else if (DESCRIPTOR_TYPE(*CurrConfigLoc) == BeforeType)
- {
- *BytesRem = 0;
- return;
- }
- }
-}
-
-void USB_GetNextDescriptorOfTypeAfter(uint16_t* const BytesRem,
- void** const CurrConfigLoc,
- const uint8_t Type,
- const uint8_t AfterType)
-{
- USB_GetNextDescriptorOfType(BytesRem, CurrConfigLoc, AfterType);
-
- if (*BytesRem)
- USB_GetNextDescriptorOfType(BytesRem, CurrConfigLoc, Type);
-}
-
-uint8_t USB_GetNextDescriptorComp(uint16_t* const BytesRem,
- void** const CurrConfigLoc,
- ConfigComparatorPtr_t const ComparatorRoutine)
-{
- uint8_t ErrorCode;
-
- while (*BytesRem)
- {
- uint8_t* PrevDescLoc = *CurrConfigLoc;
- uint16_t PrevBytesRem = *BytesRem;
-
- USB_GetNextDescriptor(BytesRem, CurrConfigLoc);
-
- if ((ErrorCode = ComparatorRoutine(*CurrConfigLoc)) != DESCRIPTOR_SEARCH_NotFound)
- {
- if (ErrorCode == DESCRIPTOR_SEARCH_Fail)
- {
- *CurrConfigLoc = PrevDescLoc;
- *BytesRem = PrevBytesRem;
- }
-
- return ErrorCode;
- }
- }
-
- return DESCRIPTOR_SEARCH_COMP_EndOfDescriptor;
-}
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/ConfigDescriptors.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/ConfigDescriptors.h deleted file mode 100644 index 0de598230..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/ConfigDescriptors.h +++ /dev/null @@ -1,286 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Configuration Descriptor definitions.
- * \copydetails Group_ConfigDescriptorParser
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_StdDescriptors
- * \defgroup Group_ConfigDescriptorParser Configuration Descriptor Parser
- * \brief USB Configuration Descriptor definitions.
- *
- * This section of the library gives a friendly API which can be used in host applications to easily
- * parse an attached device's configuration descriptor so that endpoint, interface and other descriptor
- * data can be extracted and used as needed.
- *
- * @{
- */
-
-#ifndef __CONFIGDESCRIPTOR_H__
-#define __CONFIGDESCRIPTOR_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
- #include "HostStandardReq.h"
- #include "StdDescriptors.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Casts a pointer to a descriptor inside the configuration descriptor into a pointer to the given
- * descriptor type.
- *
- * Usage Example:
- * \code
- * uint8_t* CurrDescriptor = &ConfigDescriptor[0]; // Pointing to the configuration header
- * USB_Descriptor_Configuration_Header_t* ConfigHeaderPtr = DESCRIPTOR_PCAST(CurrDescriptor,
- * USB_Descriptor_Configuration_Header_t);
- *
- * // Can now access elements of the configuration header struct using the -> indirection operator
- * \endcode
- */
- #define DESCRIPTOR_PCAST(DescriptorPtr, Type) ((Type*)(DescriptorPtr))
-
- /** Casts a pointer to a descriptor inside the configuration descriptor into the given descriptor
- * type (as an actual struct instance rather than a pointer to a struct).
- *
- * Usage Example:
- * \code
- * uint8_t* CurrDescriptor = &ConfigDescriptor[0]; // Pointing to the configuration header
- * USB_Descriptor_Configuration_Header_t ConfigHeader = DESCRIPTOR_CAST(CurrDescriptor,
- * USB_Descriptor_Configuration_Header_t);
- *
- * // Can now access elements of the configuration header struct using the . operator
- * \endcode
- */
- #define DESCRIPTOR_CAST(DescriptorPtr, Type) (*DESCRIPTOR_PCAST(DescriptorPtr, Type))
-
- /** Returns the descriptor's type, expressed as the 8-bit type value in the header of the descriptor.
- * This value's meaning depends on the descriptor's placement in the descriptor, but standard type
- * values can be accessed in the \ref USB_DescriptorTypes_t enum.
- */
- #define DESCRIPTOR_TYPE(DescriptorPtr) DESCRIPTOR_PCAST(DescriptorPtr, USB_Descriptor_Header_t)->Type
-
- /** Returns the descriptor's size, expressed as the 8-bit value indicating the number of bytes. */
- #define DESCRIPTOR_SIZE(DescriptorPtr) DESCRIPTOR_PCAST(DescriptorPtr, USB_Descriptor_Header_t)->Size
-
- /* Type Defines: */
- /** Type define for a Configuration Descriptor comparator function (function taking a pointer to an array
- * of type void, returning a uint8_t value).
- *
- * \see \ref USB_GetNextDescriptorComp function for more details.
- */
- typedef uint8_t (* ConfigComparatorPtr_t)(void*);
-
- /* Enums: */
- /** Enum for the possible return codes of the \ref USB_Host_GetDeviceConfigDescriptor() function. */
- enum USB_Host_GetConfigDescriptor_ErrorCodes_t
- {
- HOST_GETCONFIG_Successful = 0, /**< No error occurred while retrieving the configuration descriptor. */
- HOST_GETCONFIG_DeviceDisconnect = 1, /**< The attached device was disconnected while retrieving the configuration
- * descriptor.
- */
- HOST_GETCONFIG_PipeError = 2, /**< An error occurred in the pipe while sending the request. */
- HOST_GETCONFIG_SetupStalled = 3, /**< The attached device stalled the request to retrieve the configuration
- * descriptor.
- */
- HOST_GETCONFIG_SoftwareTimeOut = 4, /**< The request or data transfer timed out. */
- HOST_GETCONFIG_BuffOverflow = 5, /**< The device's configuration descriptor is too large to fit into the allocated
- * buffer.
- */
- HOST_GETCONFIG_InvalidData = 6, /**< The device returned invalid configuration descriptor data. */
- };
-
- /** Enum for return values of a descriptor comparator function. */
- enum DSearch_Return_ErrorCodes_t
- {
- DESCRIPTOR_SEARCH_Found = 0, /**< Current descriptor matches comparator criteria. */
- DESCRIPTOR_SEARCH_Fail = 1, /**< No further descriptor could possibly match criteria, fail the search. */
- DESCRIPTOR_SEARCH_NotFound = 2, /**< Current descriptor does not match comparator criteria. */
- };
-
- /** Enum for return values of \ref USB_GetNextDescriptorComp(). */
- enum DSearch_Comp_Return_ErrorCodes_t
- {
- DESCRIPTOR_SEARCH_COMP_Found = 0, /**< Configuration descriptor now points to descriptor which matches
- * search criteria of the given comparator function. */
- DESCRIPTOR_SEARCH_COMP_Fail = 1, /**< Comparator function returned \ref DESCRIPTOR_SEARCH_Fail. */
- DESCRIPTOR_SEARCH_COMP_EndOfDescriptor = 2, /**< End of configuration descriptor reached before match found. */
- };
-
- /* Function Prototypes: */
- /** Retrieves the configuration descriptor data from an attached device via a standard request into a buffer,
- * including validity and size checking to prevent a buffer overflow.
- *
- * \param[in] ConfigNumber Device configuration descriptor number to fetch from the device (usually set to 1 for
- * single configuration devices).
- * \param[in,out] ConfigSizePtr Pointer to a location for storing the retrieved configuration descriptor size.
- * \param[out] BufferPtr Pointer to the buffer for storing the configuration descriptor data.
- * \param[out] BufferSize Size of the allocated buffer where the configuration descriptor is to be stored.
- *
- * \return A value from the \ref USB_Host_GetConfigDescriptor_ErrorCodes_t enum.
- */
- uint8_t USB_Host_GetDeviceConfigDescriptor(const uint8_t ConfigNumber,
- uint16_t* const ConfigSizePtr,
- void* const BufferPtr,
- const uint16_t BufferSize) ATTR_NON_NULL_PTR_ARG(2) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value.
- * The bytes remaining value is automatically decremented.
- *
- * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor.
- * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor.
- * \param[in] Type Descriptor type value to search for.
- */
- void USB_GetNextDescriptorOfType(uint16_t* const BytesRem,
- void** const CurrConfigLoc,
- const uint8_t Type)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value,
- * which must come before a descriptor of the second given type value. If the BeforeType type
- * descriptor is reached first, the number of bytes remaining to process is set to zero and the
- * function exits. The bytes remaining value is automatically decremented.
- *
- * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor.
- * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor.
- * \param[in] Type Descriptor type value to search for.
- * \param[in] BeforeType Descriptor type value which must not be reached before the given Type descriptor.
- */
- void USB_GetNextDescriptorOfTypeBefore(uint16_t* const BytesRem,
- void** const CurrConfigLoc,
- const uint8_t Type,
- const uint8_t BeforeType)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Skips to the next sub-descriptor inside the configuration descriptor of the specified type value,
- * which must come after a descriptor of the second given type value. The bytes remaining value is
- * automatically decremented.
- *
- * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor.
- * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor.
- * \param[in] Type Descriptor type value to search for.
- * \param[in] AfterType Descriptor type value which must be reached before the given Type descriptor.
- */
- void USB_GetNextDescriptorOfTypeAfter(uint16_t* const BytesRem,
- void** const CurrConfigLoc,
- const uint8_t Type,
- const uint8_t AfterType)
- ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /** Searches for the next descriptor in the given configuration descriptor using a pre-made comparator
- * function. The routine updates the position and remaining configuration descriptor bytes values
- * automatically. If a comparator routine fails a search, the descriptor pointer is retreated back
- * so that the next descriptor search invocation will start from the descriptor which first caused the
- * original search to fail. This behavior allows for one comparator to be used immediately after another
- * has failed, starting the second search from the descriptor which failed the first.
- *
- * Comparator functions should be standard functions which accept a pointer to the header of the current
- * descriptor inside the configuration descriptor which is being compared, and should return a value from
- * the \ref DSearch_Return_ErrorCodes_t enum as a uint8_t value.
- *
- * \note This function is available in USB Host mode only.
- *
- * \param[in,out] BytesRem Pointer to an int storing the remaining bytes in the configuration descriptor.
- * \param[in,out] CurrConfigLoc Pointer to the current position in the configuration descriptor.
- * \param[in] ComparatorRoutine Name of the comparator search function to use on the configuration descriptor.
- *
- * \return Value of one of the members of the \ref DSearch_Comp_Return_ErrorCodes_t enum.
- *
- * Usage Example:
- * \code
- * uint8_t EndpointSearcher(void* CurrentDescriptor); // Comparator Prototype
- *
- * uint8_t EndpointSearcher(void* CurrentDescriptor)
- * {
- * if (DESCRIPTOR_TYPE(CurrentDescriptor) == DTYPE_Endpoint)
- * return DESCRIPTOR_SEARCH_Found;
- * else
- * return DESCRIPTOR_SEARCH_NotFound;
- * }
- *
- * //...
- *
- * // After retrieving configuration descriptor:
- * if (USB_Host_GetNextDescriptorComp(&BytesRemaining, &CurrentConfigLoc, EndpointSearcher) ==
- * Descriptor_Search_Comp_Found)
- * {
- * // Do something with the endpoint descriptor
- * }
- * \endcode
- */
- uint8_t USB_GetNextDescriptorComp(uint16_t* const BytesRem,
- void** const CurrConfigLoc,
- ConfigComparatorPtr_t const ComparatorRoutine);
-
- /* Inline Functions: */
- /** Skips over the current sub-descriptor inside the configuration descriptor, so that the pointer then
- points to the next sub-descriptor. The bytes remaining value is automatically decremented.
- *
- * \param[in,out] BytesRem Pointer to the number of bytes remaining of the configuration descriptor.
- * \param[in,out] CurrConfigLoc Pointer to the current descriptor inside the configuration descriptor.
- */
- static inline void USB_GetNextDescriptor(uint16_t* const BytesRem,
- void** CurrConfigLoc) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
- static inline void USB_GetNextDescriptor(uint16_t* const BytesRem,
- void** CurrConfigLoc)
- {
- uint16_t CurrDescriptorSize = DESCRIPTOR_CAST(*CurrConfigLoc, USB_Descriptor_Header_t).Size;
-
- if (*BytesRem < CurrDescriptorSize)
- CurrDescriptorSize = *BytesRem;
-
- *CurrConfigLoc = (void*)((uintptr_t)*CurrConfigLoc + CurrDescriptorSize);
- *BytesRem -= CurrDescriptorSize;
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Device.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Device.h deleted file mode 100644 index 995b9208e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Device.h +++ /dev/null @@ -1,159 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common USB Device definitions for all architectures.
- * \copydetails Group_Device
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_Device Device Management
- * \brief USB Device management definitions for USB device mode.
- *
- * USB Device mode related definitions common to all architectures. This module contains definitions which
- * are used when the USB controller is initialized in device mode.
- *
- * @{
- */
-
-#ifndef __USBDEVICE_H__
-#define __USBDEVICE_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
- #include "StdDescriptors.h"
- #include "USBInterrupt.h"
- #include "Endpoint.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Enums: */
- /** Enum for the various states of the USB Device state machine. Only some states are
- * implemented in the LUFA library - other states are left to the user to implement.
- *
- * For information on each possible USB device state, refer to the USB 2.0 specification.
- *
- * \see \ref USB_DeviceState, which stores the current device state machine state.
- */
- enum USB_Device_States_t
- {
- DEVICE_STATE_Unattached = 0, /**< Internally implemented by the library. This state indicates
- * that the device is not currently connected to a host.
- */
- DEVICE_STATE_Powered = 1, /**< Internally implemented by the library. This state indicates
- * that the device is connected to a host, but enumeration has not
- * yet begun.
- */
- DEVICE_STATE_Default = 2, /**< Internally implemented by the library. This state indicates
- * that the device's USB bus has been reset by the host and it is
- * now waiting for the host to begin the enumeration process.
- */
- DEVICE_STATE_Addressed = 3, /**< Internally implemented by the library. This state indicates
- * that the device has been addressed by the USB Host, but is not
- * yet configured.
- */
- DEVICE_STATE_Configured = 4, /**< May be implemented by the user project. This state indicates
- * that the device has been enumerated by the host and is ready
- * for USB communications to begin.
- */
- DEVICE_STATE_Suspended = 5, /**< May be implemented by the user project. This state indicates
- * that the USB bus has been suspended by the host, and the device
- * should power down to a minimal power level until the bus is
- * resumed.
- */
- };
-
- /* Function Prototypes: */
- /** Function to retrieve a given descriptor's size and memory location from the given descriptor type value,
- * index and language ID. This function MUST be overridden in the user application (added with full, identical
- * prototype and name so that the library can call it to retrieve descriptor data.
- *
- * \param[in] wValue The type of the descriptor to retrieve in the upper byte, and the index in the
- * lower byte (when more than one descriptor of the given type exists, such as the
- * case of string descriptors). The type may be one of the standard types defined
- * in the DescriptorTypes_t enum, or may be a class-specific descriptor type value.
- * \param[in] wIndex The language ID of the string to return if the \c wValue type indicates
- * \ref DTYPE_String, otherwise zero for standard descriptors, or as defined in a
- * class-specific standards.
- * \param[out] DescriptorAddress Pointer to the descriptor in memory. This should be set by the routine to
- * the address of the descriptor.
- * \param[out] DescriptorMemorySpace A value from the \ref USB_DescriptorMemorySpaces_t enum to indicate the memory
- * space in which the descriptor is stored. This parameter does not exist when one
- * of the \c USE_*_DESCRIPTORS compile time options is used, or on architectures which
- * use a unified address space.
- *
- * \note By default, the library expects all descriptors to be located in flash memory via the \c PROGMEM attribute.
- * If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to
- * allow the descriptors to be changed dynamically at runtime) either the \c USE_RAM_DESCRIPTORS or the
- * \c USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D
- * switch.
- *
- * \return Size in bytes of the descriptor if it exists, zero or \ref NO_DESCRIPTOR otherwise.
- */
- uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
- const uint8_t wIndex,
- const void** const DescriptorAddress
- #if (defined(ARCH_HAS_MULTI_ADDRESS_SPACE) || defined(__DOXYGEN__)) && \
- !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
- , uint8_t* const DescriptorMemorySpace
- #endif
- ) ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3);
-
- /* Architecture Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/Device_AVR8.h"
- #elif (ARCH == ARCH_UC3)
- #include "UC3/Device_UC3.h"
- #elif (ARCH == ARCH_XMEGA)
- #include "XMEGA/Device_XMEGA.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/DeviceStandardReq.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/DeviceStandardReq.c deleted file mode 100644 index c4ae64712..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/DeviceStandardReq.c +++ /dev/null @@ -1,378 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#define __INCLUDE_FROM_DEVICESTDREQ_C
-#include "DeviceStandardReq.h"
-
-uint8_t USB_Device_ConfigurationNumber;
-
-#if !defined(NO_DEVICE_SELF_POWER)
-bool USB_Device_CurrentlySelfPowered;
-#endif
-
-#if !defined(NO_DEVICE_REMOTE_WAKEUP)
-bool USB_Device_RemoteWakeupEnabled;
-#endif
-
-void USB_Device_ProcessControlRequest(void)
-{
- #if defined(ARCH_BIG_ENDIAN)
- USB_ControlRequest.bmRequestType = Endpoint_Read_8();
- USB_ControlRequest.bRequest = Endpoint_Read_8();
- USB_ControlRequest.wValue = Endpoint_Read_16_LE();
- USB_ControlRequest.wIndex = Endpoint_Read_16_LE();
- USB_ControlRequest.wLength = Endpoint_Read_16_LE();
- #else
- uint8_t* RequestHeader = (uint8_t*)&USB_ControlRequest;
-
- for (uint8_t RequestHeaderByte = 0; RequestHeaderByte < sizeof(USB_Request_Header_t); RequestHeaderByte++)
- *(RequestHeader++) = Endpoint_Read_8();
- #endif
-
- EVENT_USB_Device_ControlRequest();
-
- if (Endpoint_IsSETUPReceived())
- {
- uint8_t bmRequestType = USB_ControlRequest.bmRequestType;
-
- switch (USB_ControlRequest.bRequest)
- {
- case REQ_GetStatus:
- if ((bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) ||
- (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_ENDPOINT)))
- {
- USB_Device_GetStatus();
- }
-
- break;
- case REQ_ClearFeature:
- case REQ_SetFeature:
- if ((bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE)) ||
- (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT)))
- {
- USB_Device_ClearSetFeature();
- }
-
- break;
- case REQ_SetAddress:
- if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE))
- USB_Device_SetAddress();
-
- break;
- case REQ_GetDescriptor:
- if ((bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE)) ||
- (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE)))
- {
- USB_Device_GetDescriptor();
- }
-
- break;
- case REQ_GetConfiguration:
- if (bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE))
- USB_Device_GetConfiguration();
-
- break;
- case REQ_SetConfiguration:
- if (bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE))
- USB_Device_SetConfiguration();
-
- break;
- }
- }
-
- if (Endpoint_IsSETUPReceived())
- {
- Endpoint_StallTransaction();
- Endpoint_ClearSETUP();
- }
-}
-
-static void USB_Device_SetAddress(void)
-{
- uint8_t DeviceAddress = (USB_ControlRequest.wValue & 0x7F);
- uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
- GlobalInterruptDisable();
-
- Endpoint_ClearSETUP();
-
- Endpoint_ClearStatusStage();
-
- while (!(Endpoint_IsINReady()));
-
- USB_Device_SetDeviceAddress(DeviceAddress);
- USB_DeviceState = (DeviceAddress) ? DEVICE_STATE_Addressed : DEVICE_STATE_Default;
-
- SetGlobalInterruptMask(CurrentGlobalInt);
-}
-
-static void USB_Device_SetConfiguration(void)
-{
- #if defined(FIXED_NUM_CONFIGURATIONS)
- if ((uint8_t)USB_ControlRequest.wValue > FIXED_NUM_CONFIGURATIONS)
- return;
- #else
- USB_Descriptor_Device_t* DevDescriptorPtr;
-
- #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE)
- #if defined(USE_FLASH_DESCRIPTORS)
- #define MemoryAddressSpace MEMSPACE_FLASH
- #elif defined(USE_EEPROM_DESCRIPTORS)
- #define MemoryAddressSpace MEMSPACE_EEPROM
- #elif defined(USE_SRAM_DESCRIPTORS)
- #define MemoryAddressSpace MEMSPACE_SRAM
- #else
- uint8_t MemoryAddressSpace;
- #endif
- #endif
-
- if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DevDescriptorPtr
- #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \
- !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
- , &MemoryAddressSpace
- #endif
- ) == NO_DESCRIPTOR)
- {
- return;
- }
-
- #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE)
- if (MemoryAddressSpace == MEMSPACE_FLASH)
- {
- if (((uint8_t)USB_ControlRequest.wValue > pgm_read_byte(&DevDescriptorPtr->NumberOfConfigurations)))
- return;
- }
- else if (MemoryAddressSpace == MEMSPACE_EEPROM)
- {
- if (((uint8_t)USB_ControlRequest.wValue > eeprom_read_byte(&DevDescriptorPtr->NumberOfConfigurations)))
- return;
- }
- else
- {
- if ((uint8_t)USB_ControlRequest.wValue > DevDescriptorPtr->NumberOfConfigurations)
- return;
- }
- #else
- if ((uint8_t)USB_ControlRequest.wValue > DevDescriptorPtr->NumberOfConfigurations)
- return;
- #endif
- #endif
-
- Endpoint_ClearSETUP();
-
- USB_Device_ConfigurationNumber = (uint8_t)USB_ControlRequest.wValue;
-
- Endpoint_ClearStatusStage();
-
- if (USB_Device_ConfigurationNumber)
- USB_DeviceState = DEVICE_STATE_Configured;
- else
- USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered;
-
- EVENT_USB_Device_ConfigurationChanged();
-}
-
-static void USB_Device_GetConfiguration(void)
-{
- Endpoint_ClearSETUP();
-
- Endpoint_Write_8(USB_Device_ConfigurationNumber);
- Endpoint_ClearIN();
-
- Endpoint_ClearStatusStage();
-}
-
-#if !defined(NO_INTERNAL_SERIAL) && (USE_INTERNAL_SERIAL != NO_DESCRIPTOR)
-static void USB_Device_GetInternalSerialDescriptor(void)
-{
- struct
- {
- USB_Descriptor_Header_t Header;
- uint16_t UnicodeString[INTERNAL_SERIAL_LENGTH_BITS / 4];
- } SignatureDescriptor;
-
- SignatureDescriptor.Header.Type = DTYPE_String;
- SignatureDescriptor.Header.Size = USB_STRING_LEN(INTERNAL_SERIAL_LENGTH_BITS / 4);
-
- USB_Device_GetSerialString(SignatureDescriptor.UnicodeString);
-
- Endpoint_ClearSETUP();
-
- Endpoint_Write_Control_Stream_LE(&SignatureDescriptor, sizeof(SignatureDescriptor));
- Endpoint_ClearOUT();
-}
-#endif
-
-static void USB_Device_GetDescriptor(void)
-{
- const void* DescriptorPointer;
- uint16_t DescriptorSize;
-
- #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \
- !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
- uint8_t DescriptorAddressSpace;
- #endif
-
- #if !defined(NO_INTERNAL_SERIAL) && (USE_INTERNAL_SERIAL != NO_DESCRIPTOR)
- if (USB_ControlRequest.wValue == ((DTYPE_String << 8) | USE_INTERNAL_SERIAL))
- {
- USB_Device_GetInternalSerialDescriptor();
- return;
- }
- #endif
-
- if ((DescriptorSize = CALLBACK_USB_GetDescriptor(USB_ControlRequest.wValue, USB_ControlRequest.wIndex,
- &DescriptorPointer
- #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \
- !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
- , &DescriptorAddressSpace
- #endif
- )) == NO_DESCRIPTOR)
- {
- return;
- }
-
- Endpoint_ClearSETUP();
-
- #if defined(USE_RAM_DESCRIPTORS) || !defined(ARCH_HAS_MULTI_ADDRESS_SPACE)
- Endpoint_Write_Control_Stream_LE(DescriptorPointer, DescriptorSize);
- #elif defined(USE_EEPROM_DESCRIPTORS)
- Endpoint_Write_Control_EStream_LE(DescriptorPointer, DescriptorSize);
- #elif defined(USE_FLASH_DESCRIPTORS)
- Endpoint_Write_Control_PStream_LE(DescriptorPointer, DescriptorSize);
- #else
- if (DescriptorAddressSpace == MEMSPACE_FLASH)
- Endpoint_Write_Control_PStream_LE(DescriptorPointer, DescriptorSize);
- else if (DescriptorAddressSpace == MEMSPACE_EEPROM)
- Endpoint_Write_Control_EStream_LE(DescriptorPointer, DescriptorSize);
- else
- Endpoint_Write_Control_Stream_LE(DescriptorPointer, DescriptorSize);
- #endif
-
- Endpoint_ClearOUT();
-}
-
-static void USB_Device_GetStatus(void)
-{
- uint8_t CurrentStatus = 0;
-
- switch (USB_ControlRequest.bmRequestType)
- {
- case (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE):
- #if !defined(NO_DEVICE_SELF_POWER)
- if (USB_Device_CurrentlySelfPowered)
- CurrentStatus |= FEATURE_SELFPOWERED_ENABLED;
- #endif
-
- #if !defined(NO_DEVICE_REMOTE_WAKEUP)
- if (USB_Device_RemoteWakeupEnabled)
- CurrentStatus |= FEATURE_REMOTE_WAKEUP_ENABLED;
- #endif
- break;
- case (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_ENDPOINT):
- #if !defined(CONTROL_ONLY_DEVICE)
- Endpoint_SelectEndpoint((uint8_t)USB_ControlRequest.wIndex & ENDPOINT_EPNUM_MASK);
-
- CurrentStatus = Endpoint_IsStalled();
-
- Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
- #endif
-
- break;
- default:
- return;
- }
-
- Endpoint_ClearSETUP();
-
- Endpoint_Write_16_LE(CurrentStatus);
- Endpoint_ClearIN();
-
- Endpoint_ClearStatusStage();
-}
-
-static void USB_Device_ClearSetFeature(void)
-{
- switch (USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_RECIPIENT)
- {
- #if !defined(NO_DEVICE_REMOTE_WAKEUP)
- case REQREC_DEVICE:
- if ((uint8_t)USB_ControlRequest.wValue == FEATURE_SEL_DeviceRemoteWakeup)
- USB_Device_RemoteWakeupEnabled = (USB_ControlRequest.bRequest == REQ_SetFeature);
- else
- return;
-
- break;
- #endif
- #if !defined(CONTROL_ONLY_DEVICE)
- case REQREC_ENDPOINT:
- if ((uint8_t)USB_ControlRequest.wValue == FEATURE_SEL_EndpointHalt)
- {
- uint8_t EndpointIndex = ((uint8_t)USB_ControlRequest.wIndex & ENDPOINT_EPNUM_MASK);
-
- if (EndpointIndex == ENDPOINT_CONTROLEP)
- return;
-
- Endpoint_SelectEndpoint(EndpointIndex);
-
- if (Endpoint_IsEnabled())
- {
- if (USB_ControlRequest.bRequest == REQ_SetFeature)
- {
- Endpoint_StallTransaction();
- }
- else
- {
- Endpoint_ClearStall();
- Endpoint_ResetEndpoint(EndpointIndex);
- Endpoint_ResetDataToggle();
- }
- }
- }
-
- break;
- #endif
- default:
- return;
- }
-
- Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
-
- Endpoint_ClearSETUP();
-
- Endpoint_ClearStatusStage();
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/DeviceStandardReq.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/DeviceStandardReq.h deleted file mode 100644 index dfaa1662e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/DeviceStandardReq.h +++ /dev/null @@ -1,158 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB device standard request management.
- *
- * This file contains the function prototypes necessary for the processing of incoming standard control requests
- * when the library is in USB device mode.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-#ifndef __DEVICESTDREQ_H__
-#define __DEVICESTDREQ_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
- #include "StdDescriptors.h"
- #include "Events.h"
- #include "StdRequestType.h"
- #include "USBTask.h"
- #include "USBController.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Enums: */
- #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) || defined(__DOXYGEN__)
- /** Enum for the possible descriptor memory spaces, for the \c MemoryAddressSpace parameter of the
- * \ref CALLBACK_USB_GetDescriptor() function. This can be used when none of the \c USE_*_DESCRIPTORS
- * compile time options are used, to indicate in which memory space the descriptor is stored.
- *
- * \ingroup Group_Device
- */
- enum USB_DescriptorMemorySpaces_t
- {
- #if defined(ARCH_HAS_FLASH_ADDRESS_SPACE) || defined(__DOXYGEN__)
- MEMSPACE_FLASH = 0, /**< Indicates the requested descriptor is located in FLASH memory. */
- #endif
- #if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE) || defined(__DOXYGEN__)
- MEMSPACE_EEPROM = 1, /**< Indicates the requested descriptor is located in EEPROM memory. */
- #endif
- MEMSPACE_RAM = 2, /**< Indicates the requested descriptor is located in RAM memory. */
- };
- #endif
-
- /* Global Variables: */
- /** Indicates the currently set configuration number of the device. USB devices may have several
- * different configurations which the host can select between; this indicates the currently selected
- * value, or 0 if no configuration has been selected.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- *
- * \ingroup Group_Device
- */
- extern uint8_t USB_Device_ConfigurationNumber;
-
- #if !defined(NO_DEVICE_REMOTE_WAKEUP)
- /** Indicates if the host is currently allowing the device to issue remote wakeup events. If this
- * flag is cleared, the device should not issue remote wakeup events to the host.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- *
- * \note To reduce FLASH usage of the compiled applications where Remote Wakeup is not supported,
- * this global and the underlying management code can be disabled by defining the
- * \c NO_DEVICE_REMOTE_WAKEUP token in the project makefile and passing it to the compiler via
- * the -D switch.
- *
- * \ingroup Group_Device
- */
- extern bool USB_Device_RemoteWakeupEnabled;
- #endif
-
- #if !defined(NO_DEVICE_SELF_POWER)
- /** Indicates if the device is currently being powered by its own power supply, rather than being
- * powered by the host's USB supply. This flag should remain cleared if the device does not
- * support self powered mode, as indicated in the device descriptors.
- *
- * \ingroup Group_Device
- */
- extern bool USB_Device_CurrentlySelfPowered;
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- #if defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS)
- #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive.
- #elif defined(USE_RAM_DESCRIPTORS) && defined(USE_FLASH_DESCRIPTORS)
- #error USE_RAM_DESCRIPTORS and USE_FLASH_DESCRIPTORS are mutually exclusive.
- #elif defined(USE_FLASH_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS)
- #error USE_FLASH_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive.
- #elif defined(USE_FLASH_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS) && defined(USE_RAM_DESCRIPTORS)
- #error Only one of the USE_*_DESCRIPTORS modes should be selected.
- #endif
-
- /* Function Prototypes: */
- void USB_Device_ProcessControlRequest(void);
-
- #if defined(__INCLUDE_FROM_DEVICESTDREQ_C)
- static void USB_Device_SetAddress(void);
- static void USB_Device_SetConfiguration(void);
- static void USB_Device_GetConfiguration(void);
- static void USB_Device_GetDescriptor(void);
- static void USB_Device_GetStatus(void);
- static void USB_Device_ClearSetFeature(void);
-
- #if !defined(NO_INTERNAL_SERIAL) && (USE_INTERNAL_SERIAL != NO_DESCRIPTOR)
- static void USB_Device_GetInternalSerialDescriptor(void);
- #endif
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Endpoint.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Endpoint.h deleted file mode 100644 index a6ca64dd2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Endpoint.h +++ /dev/null @@ -1,130 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Endpoint definitions for all architectures.
- * \copydetails Group_EndpointManagement
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_EndpointManagement
- * \defgroup Group_EndpointRW Endpoint Data Reading and Writing
- * \brief Endpoint data read/write definitions.
- *
- * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints.
- */
-
-/** \ingroup Group_EndpointRW
- * \defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types
- * \brief Endpoint data primitive read/write definitions.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
- * from and to endpoints.
- */
-
-/** \ingroup Group_EndpointManagement
- * \defgroup Group_EndpointPacketManagement Endpoint Packet Management
- * \brief USB Endpoint package management definitions.
- *
- * Functions, macros, variables, enums and types related to packet management of endpoints.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_EndpointManagement Endpoint Management
- * \brief Endpoint management definitions.
- *
- * Functions, macros and enums related to endpoint management when in USB Device mode. This
- * module contains the endpoint management macros, as well as endpoint interrupt and data
- * send/receive functions for various data types.
- *
- * @{
- */
-
-#ifndef __ENDPOINT_H__
-#define __ENDPOINT_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** Type define for a endpoint table entry, used to configure endpoints in groups via
- * \ref Endpoint_ConfigureEndpointTable().
- */
- typedef struct
- {
- uint8_t Address; /**< Address of the endpoint to configure, or zero if the table entry is to be unused. */
- uint16_t Size; /**< Size of the endpoint bank, in bytes. */
- uint8_t Type; /**< Type of the endpoint, a \c EP_TYPE_* mask. */
- uint8_t Banks; /**< Number of hardware banks to use for the endpoint. */
- } USB_Endpoint_Table_t;
-
- /* Macros: */
- /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
- * numerical address in the device.
- */
- #define ENDPOINT_EPNUM_MASK 0x0F
-
- /** Endpoint address for the default control endpoint, which always resides in address 0. This is
- * defined for convenience to give more readable code when used with the endpoint macros.
- */
- #define ENDPOINT_CONTROLEP 0
-
- /* Architecture Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/Endpoint_AVR8.h"
- #elif (ARCH == ARCH_UC3)
- #include "UC3/Endpoint_UC3.h"
- #elif (ARCH == ARCH_XMEGA)
- #include "XMEGA/Endpoint_XMEGA.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/EndpointStream.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/EndpointStream.h deleted file mode 100644 index 89df381ae..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/EndpointStream.h +++ /dev/null @@ -1,124 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Endpoint data stream transmission and reception management.
- * \copydetails Group_EndpointStreamRW
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_EndpointRW
- * \defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams
- * \brief Endpoint data stream transmission and reception management.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of data streams from
- * and to endpoints.
- *
- * @{
- */
-
-#ifndef __ENDPOINT_STREAM_H__
-#define __ENDPOINT_STREAM_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Enums: */
- /** Enum for the possible error return codes of the \c Endpoint_*_Stream_* functions. */
- enum Endpoint_Stream_RW_ErrorCodes_t
- {
- ENDPOINT_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */
- ENDPOINT_RWSTREAM_EndpointStalled = 1, /**< The endpoint was stalled during the stream
- * transfer by the host or device.
- */
- ENDPOINT_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
- * the transfer.
- */
- ENDPOINT_RWSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
- * no USB endpoint traffic can occur until the bus
- * has resumed.
- */
- ENDPOINT_RWSTREAM_Timeout = 4, /**< The host failed to accept or send the next packet
- * within the software timeout period set by the
- * \ref USB_STREAM_TIMEOUT_MS macro.
- */
- ENDPOINT_RWSTREAM_IncompleteTransfer = 5, /**< Indicates that the endpoint bank became full or empty before
- * the complete contents of the current stream could be
- * transferred. The endpoint stream function should be called
- * again to process the next chunk of data in the transfer.
- */
- };
-
- /** Enum for the possible error return codes of the \c Endpoint_*_Control_Stream_* functions. */
- enum Endpoint_ControlStream_RW_ErrorCodes_t
- {
- ENDPOINT_RWCSTREAM_NoError = 0, /**< Command completed successfully, no error. */
- ENDPOINT_RWCSTREAM_HostAborted = 1, /**< The aborted the transfer prematurely. */
- ENDPOINT_RWCSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
- * the transfer.
- */
- ENDPOINT_RWCSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
- * no USB endpoint traffic can occur until the bus
- * has resumed.
- */
- };
-
- /* Architecture Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/EndpointStream_AVR8.h"
- #elif (ARCH == ARCH_UC3)
- #include "UC3/EndpointStream_UC3.h"
- #elif (ARCH == ARCH_XMEGA)
- #include "XMEGA/EndpointStream_XMEGA.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.c deleted file mode 100644 index 5f5043060..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.c +++ /dev/null @@ -1,40 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_EVENTS_C
-#define __INCLUDE_FROM_USB_DRIVER
-#include "Events.h"
-
-// cppcheck-suppress unusedFunction
-void USB_Event_Stub(void)
-{
-
-}
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.h deleted file mode 100644 index 33db543d4..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Events.h +++ /dev/null @@ -1,366 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Event management definitions.
- * \copydetails Group_Events
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_Events USB Events
- * \brief USB Event management definitions.
- *
- * This module contains macros and functions relating to the management of library events, which are small
- * pieces of code similar to ISRs which are run when a given condition is met. Each event can be fired from
- * multiple places in the user or library code, which may or may not be inside an ISR, thus each handler
- * should be written to be as small and fast as possible to prevent possible problems.
- *
- * Events can be hooked by the user application by declaring a handler function with the same name and parameters
- * listed here. If an event with no user-associated handler is fired within the library, it by default maps to an
- * internal empty stub function.
- *
- * Each event must only have one associated event handler, but can be raised by multiple sources by calling the
- * event handler function (with any required event parameters).
- *
- * @{
- */
-
-#ifndef __USBEVENTS_H__
-#define __USBEVENTS_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Pseudo-Functions for Doxygen: */
- #if !defined(__INCLUDE_FROM_EVENTS_C) || defined(__DOXYGEN__)
- /** Event for USB mode pin level change. This event fires when the USB interface is set to dual role
- * mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires
- * before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect
- * event has fired (if disconnected before the role change).
- *
- * \note This event only exists on microcontrollers that support dual role USB modes.
- * \n\n
- *
- * \note This event does not exist if the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY tokens have been supplied
- * to the compiler (see \ref Group_USBManagement documentation).
- */
- void EVENT_USB_UIDChange(void);
-
- /** Event for USB host error. This event fires when a hardware fault has occurred whilst the USB
- * interface is in host mode.
- *
- * \param[in] ErrorCode Error code indicating the failure reason, a value in \ref USB_Host_ErrorCodes_t.
- *
- * \note This event only exists on microcontrollers that supports USB host mode.
- * \n\n
- *
- * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- */
- void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
-
- /** Event for USB device attachment. This event fires when a the USB interface is in host mode, and
- * a USB device has been connected to the USB interface. This is interrupt driven, thus fires before
- * the standard \ref EVENT_USB_Device_Connect() event and so can be used to programmatically start the USB
- * management task to reduce CPU consumption.
- *
- * \note This event only exists on microcontrollers that supports USB host mode.
- * \n\n
- *
- * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- *
- * \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage.
- */
- void EVENT_USB_Host_DeviceAttached(void);
-
- /** Event for USB device removal. This event fires when a the USB interface is in host mode, and
- * a USB device has been removed the USB interface whether or not it has been enumerated. This
- * can be used to programmatically stop the USB management task to reduce CPU consumption.
- *
- * \note This event only exists on microcontrollers that supports USB host mode.
- * \n\n
- *
- * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- *
- * \see \ref USB_USBTask() for more information on the USB management task and reducing CPU usage.
- */
- void EVENT_USB_Host_DeviceUnattached(void);
-
- /** Event for USB device enumeration failure. This event fires when a the USB interface is
- * in host mode, and an attached USB device has failed to enumerate completely.
- *
- * \param[in] ErrorCode Error code indicating the failure reason, a value in
- * \ref USB_Host_EnumerationErrorCodes_t.
- *
- * \param[in] SubErrorCode Sub error code indicating the reason for failure - for example, if the
- * ErrorCode parameter indicates a control error, this will give the error
- * code returned by the \ref USB_Host_SendControlRequest() function.
- *
- * \note This event only exists on microcontrollers that supports USB host mode.
- * \n\n
- *
- * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- */
- void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
- const uint8_t SubErrorCode);
-
- /** Event for USB device enumeration completion. This event fires when a the USB interface is
- * in host mode and an attached USB device has been completely enumerated and is ready to be
- * controlled by the user application.
- *
- * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
- * 1 second) when a transaction is waiting to be processed by the device will prevent break communications
- * and cause the host to reset the USB bus.
- */
- void EVENT_USB_Host_DeviceEnumerationComplete(void);
-
- /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB
- * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate
- * millisecond timer source when the USB bus is not suspended while in host mode.
- *
- * This event is time-critical; it is run once per millisecond and thus long handlers will significantly
- * degrade device performance. This event should only be enabled when needed to reduce device wake-ups.
- *
- * \note This event is not normally active - it must be manually enabled and disabled via the
- * \ref USB_Host_EnableSOFEvents() and \ref USB_Host_DisableSOFEvents() commands after enumeration of
- * a USB device.
- * \n\n
- *
- * \note This event does not exist if the \c USB_DEVICE_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- */
- void EVENT_USB_Host_StartOfFrame(void);
-
- /** Event for USB device connection. This event fires when the microcontroller is in USB Device mode
- * and the device is connected to a USB host, beginning the enumeration process measured by a rising
- * level on the microcontroller's VBUS sense pin.
- *
- * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
- * two seconds) will prevent the device from enumerating correctly.
- *
- * \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
- * if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
- *
- * \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available.
- * this means that the current connection state is derived from the bus suspension and wake up events by default,
- * which is not always accurate (host may suspend the bus while still connected). If the actual connection state
- * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
- * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
- * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
- * \n\n
- *
- * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
- */
- void EVENT_USB_Device_Connect(void);
-
- /** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is
- * disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin.
- *
- * \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
- * if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
- *
- * \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller.
- * this means that the current connection state is derived from the bus suspension and wake up events by default,
- * which is not always accurate (host may suspend the bus while still connected). If the actual connection state
- * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by
- * passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
- * and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
- * \n\n
- *
- * \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
- */
- void EVENT_USB_Device_Disconnect(void);
-
- /** Event for control requests. This event fires when a the USB host issues a control request
- * to the mandatory device control endpoint (of address 0). This may either be a standard
- * request that the library may have a handler code for internally, or a class specific request
- * issued to the device which must be handled appropriately. If a request is not processed in the
- * user application via this event, it will be passed to the library for processing internally
- * if a suitable handler exists.
- *
- * This event is time-critical; each packet within the request transaction must be acknowledged or
- * sent within 50ms or the host will abort the transfer.
- *
- * The library internally handles all standard control requests with the exceptions of SYNC FRAME,
- * SET DESCRIPTOR and SET INTERFACE. These and all other non-standard control requests will be left
- * for the user to process via this event if desired. If not handled in the user application or by
- * the library internally, unknown requests are automatically STALLed.
- *
- * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- * \n\n
- *
- * \note Requests should be handled in the same manner as described in the USB 2.0 Specification,
- * or appropriate class specification. In all instances, the library has already read the
- * request SETUP parameters into the \ref USB_ControlRequest structure which should then be used
- * by the application to determine how to handle the issued request.
- */
- void EVENT_USB_Device_ControlRequest(void);
-
- /** Event for USB configuration number changed. This event fires when a the USB host changes the
- * selected configuration number while in device mode. This event should be hooked in device
- * applications to create the endpoints and configure the device for the selected configuration.
- *
- * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
- * one second) will prevent the device from enumerating correctly.
- *
- * This event fires after the value of \ref USB_Device_ConfigurationNumber has been changed.
- *
- * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- */
- void EVENT_USB_Device_ConfigurationChanged(void);
-
- /** Event for USB suspend. This event fires when a the USB host suspends the device by halting its
- * transmission of Start Of Frame pulses to the device. This is generally hooked in order to move
- * the device over to a low power state until the host wakes up the device. If the USB interface is
- * enumerated with the \ref USB_OPT_AUTO_PLL option set, the library will automatically suspend the
- * USB PLL before the event is fired to save power.
- *
- * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- * \n\n
- *
- * \note This event does not exist on the microcontrollers with limited USB VBUS sensing abilities
- * when the \c NO_LIMITED_CONTROLLER_CONNECT compile time token is not set - see
- * \ref EVENT_USB_Device_Disconnect.
- *
- * \see \ref EVENT_USB_Device_WakeUp() event for accompanying Wake Up event.
- */
- void EVENT_USB_Device_Suspend(void);
-
- /** Event for USB wake up. This event fires when a the USB interface is suspended while in device
- * mode, and the host wakes up the device by supplying Start Of Frame pulses. This is generally
- * hooked to pull the user application out of a low power state and back into normal operating
- * mode. If the USB interface is enumerated with the \ref USB_OPT_AUTO_PLL option set, the library
- * will automatically restart the USB PLL before the event is fired.
- *
- * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- * \n\n
- *
- * \note This event does not exist on the microcontrollers with limited USB VBUS sensing abilities
- * when the \c NO_LIMITED_CONTROLLER_CONNECT compile time token is not set - see
- * \ref EVENT_USB_Device_Disconnect.
- *
- * \see \ref EVENT_USB_Device_Suspend() event for accompanying Suspend event.
- */
- void EVENT_USB_Device_WakeUp(void);
-
- /** Event for USB interface reset. This event fires when the USB interface is in device mode, and
- * a the USB host requests that the device reset its interface. This event fires after the control
- * endpoint has been automatically configured by the library.
- *
- * This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
- * two seconds) will prevent the device from enumerating correctly.
- *
- * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- */
- void EVENT_USB_Device_Reset(void);
-
- /** Event for USB Start Of Frame detection, when enabled. This event fires at the start of each USB
- * frame, once per millisecond, and is synchronized to the USB bus. This can be used as an accurate
- * millisecond timer source when the USB bus is enumerated in device mode to a USB host.
- *
- * This event is time-critical; it is run once per millisecond and thus long handlers will significantly
- * degrade device performance. This event should only be enabled when needed to reduce device wake-ups.
- *
- * \pre This event is not normally active - it must be manually enabled and disabled via the
- * \ref USB_Device_EnableSOFEvents() and \ref USB_Device_DisableSOFEvents() commands after enumeration.
- * \n\n
- *
- * \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see
- * \ref Group_USBManagement documentation).
- */
- void EVENT_USB_Device_StartOfFrame(void);
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_EVENTS_C)
- void USB_Event_Stub(void) ATTR_CONST;
-
- #if defined(USB_CAN_BE_BOTH)
- void EVENT_USB_UIDChange(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- void EVENT_USB_Host_HostError(const uint8_t ErrorCode) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Host_DeviceAttached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Host_DeviceUnattached(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Host_DeviceEnumerationComplete(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
- const uint8_t SubErrorCode)
- ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Host_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- #endif
-
- #if defined(USB_CAN_BE_DEVICE)
- void EVENT_USB_Device_Connect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Device_Disconnect(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Device_ControlRequest(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Device_ConfigurationChanged(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Device_Suspend(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Device_WakeUp(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Device_Reset(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- void EVENT_USB_Device_StartOfFrame(void) ATTR_WEAK ATTR_ALIAS(USB_Event_Stub);
- #endif
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Host.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Host.h deleted file mode 100644 index bf2225f31..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Host.h +++ /dev/null @@ -1,139 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common USB Host definitions for all architectures.
- * \copydetails Group_Host
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_Host Host Management
- * \brief USB Host management definitions for USB host mode.
- *
- * USB Host mode related macros and enums. This module contains macros and enums which are used when
- * the USB controller is initialized in host mode.
- *
- * @{
- */
-
-#ifndef __USBHOST_H__
-#define __USBHOST_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Enums: */
- /** Enum for the various states of the USB Host state machine.
- *
- * For information on each possible USB host state, refer to the USB 2.0 specification.
- * Several of the USB host states are broken up further into multiple smaller sub-states,
- * so that they can be internally implemented inside the library in an efficient manner.
- *
- * \see \ref USB_HostState, which stores the current host state machine state.
- */
- enum USB_Host_States_t
- {
- HOST_STATE_WaitForDevice = 0, /**< This state indicates that the stack is waiting for an interval
- * to elapse before continuing with the next step of the device
- * enumeration process.
- */
- HOST_STATE_Unattached = 1, /**< This state indicates that the host state machine is waiting for
- * a device to be attached so that it can start the enumeration process.
- */
- HOST_STATE_Powered = 2, /**< This state indicates that a device has been attached, and the
- * library's internals are being configured to begin the enumeration
- * process.
- */
- HOST_STATE_Powered_WaitForDeviceSettle = 3, /**< This state indicates that the stack is waiting for the initial
- * settling period to elapse before beginning the enumeration process.
- */
- HOST_STATE_Powered_WaitForConnect = 4, /**< This state indicates that the stack is waiting for a connection event
- * from the USB controller to indicate a valid USB device has been attached
- * to the bus and is ready to be enumerated.
- */
- HOST_STATE_Powered_DoReset = 5, /**< This state indicates that a valid USB device has been attached, and that
- * it will now be reset to ensure it is ready for enumeration.
- */
- HOST_STATE_Powered_ConfigPipe = 6, /**< This state indicates that the attached device is currently powered and
- * reset, and that the control pipe is now being configured by the stack.
- */
- HOST_STATE_Default = 7, /**< This state indicates that the stack is currently retrieving the control
- * endpoint's size from the device, so that the control pipe can be altered
- * to match.
- */
- HOST_STATE_Default_PostReset = 8, /**< This state indicates that the control pipe is being reconfigured to match
- * the retrieved control endpoint size from the device, and the device's USB
- * bus address is being set.
- */
- HOST_STATE_Default_PostAddressSet = 9, /**< This state indicates that the device's address has now been set, and the
- * stack is has now completed the device enumeration process. This state causes
- * the stack to change the current USB device address to that set for the
- * connected device, before progressing to the \ref HOST_STATE_Addressed state
- * ready for use in the user application.
- */
- HOST_STATE_Addressed = 10, /**< Indicates that the device has been enumerated and addressed, and is now waiting
- * for the user application to configure the device ready for use.
- */
- HOST_STATE_Configured = 11, /**< Indicates that the device has been configured into a valid device configuration,
- * ready for general use by the user application.
- */
- };
-
- /* Architecture Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/Host_AVR8.h"
- #elif (ARCH == ARCH_UC3)
- #include "UC3/Host_UC3.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/HostStandardReq.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/HostStandardReq.c deleted file mode 100644 index 3242822f7..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/HostStandardReq.c +++ /dev/null @@ -1,322 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_HOSTSTDREQ_C
-#include "HostStandardReq.h"
-
-uint8_t USB_Host_ConfigurationNumber;
-
-static uint8_t USB_Host_SendControlRequest_PRV(void* const BufferPtr)
-{
- uint8_t* DataStream = (uint8_t*)BufferPtr;
- uint8_t ReturnStatus = HOST_SENDCONTROL_Successful;
- uint16_t DataLen = USB_ControlRequest.wLength;
-
- USB_Host_ResumeBus();
-
- if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
- return ReturnStatus;
-
- Pipe_SetPipeToken(PIPE_TOKEN_SETUP);
- Pipe_ClearError();
-
- Pipe_Unfreeze();
-
- #if defined(ARCH_BIG_ENDIAN)
- Pipe_Write_8(USB_ControlRequest.bmRequestType);
- Pipe_Write_8(USB_ControlRequest.bRequest);
- Pipe_Write_16_LE(USB_ControlRequest.wValue);
- Pipe_Write_16_LE(USB_ControlRequest.wIndex);
- Pipe_Write_16_LE(USB_ControlRequest.wLength);
- #else
- uint8_t* HeaderStream = (uint8_t*)&USB_ControlRequest;
-
- for (uint8_t HeaderByte = 0; HeaderByte < sizeof(USB_Request_Header_t); HeaderByte++)
- Pipe_Write_8(*(HeaderStream++));
- #endif
-
- Pipe_ClearSETUP();
-
- if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_SetupSent)) != HOST_SENDCONTROL_Successful)
- return ReturnStatus;
-
- Pipe_Freeze();
-
- if ((ReturnStatus = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
- return ReturnStatus;
-
- if ((USB_ControlRequest.bmRequestType & CONTROL_REQTYPE_DIRECTION) == REQDIR_DEVICETOHOST)
- {
- Pipe_SetPipeToken(PIPE_TOKEN_IN);
-
- if (DataStream != NULL)
- {
- while (DataLen)
- {
- Pipe_Unfreeze();
-
- if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_InReceived)) != HOST_SENDCONTROL_Successful)
- return ReturnStatus;
-
- if (!(Pipe_BytesInPipe()))
- DataLen = 0;
-
- while (Pipe_BytesInPipe() && DataLen)
- {
- *(DataStream++) = Pipe_Read_8();
- DataLen--;
- }
-
- Pipe_Freeze();
- Pipe_ClearIN();
- }
- }
-
- Pipe_SetPipeToken(PIPE_TOKEN_OUT);
- Pipe_Unfreeze();
-
- if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
- return ReturnStatus;
-
- Pipe_ClearOUT();
-
- if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
- return ReturnStatus;
- }
- else
- {
- if (DataStream != NULL)
- {
- Pipe_SetPipeToken(PIPE_TOKEN_OUT);
- Pipe_Unfreeze();
-
- while (DataLen)
- {
- if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
- return ReturnStatus;
-
- while (DataLen && (Pipe_BytesInPipe() < USB_Host_ControlPipeSize))
- {
- Pipe_Write_8(*(DataStream++));
- DataLen--;
- }
-
- Pipe_ClearOUT();
- }
-
- if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_OutReady)) != HOST_SENDCONTROL_Successful)
- return ReturnStatus;
-
- Pipe_Freeze();
- }
-
- Pipe_SetPipeToken(PIPE_TOKEN_IN);
- Pipe_Unfreeze();
-
- if ((ReturnStatus = USB_Host_WaitForIOS(USB_HOST_WAITFOR_InReceived)) != HOST_SENDCONTROL_Successful)
- return ReturnStatus;
-
- Pipe_ClearIN();
- }
-
- return ReturnStatus;
-}
-
-static uint8_t USB_Host_WaitForIOS(const uint8_t WaitType)
-{
- #if (USB_HOST_TIMEOUT_MS < 0xFF)
- uint8_t TimeoutCounter = USB_HOST_TIMEOUT_MS;
- #else
- uint16_t TimeoutCounter = USB_HOST_TIMEOUT_MS;
- #endif
-
- while (!(((WaitType == USB_HOST_WAITFOR_SetupSent) && Pipe_IsSETUPSent()) ||
- ((WaitType == USB_HOST_WAITFOR_InReceived) && Pipe_IsINReceived()) ||
- ((WaitType == USB_HOST_WAITFOR_OutReady) && Pipe_IsOUTReady())))
- {
- uint8_t ErrorCode;
-
- if ((ErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
- return ErrorCode;
-
- if (!(TimeoutCounter--))
- return HOST_SENDCONTROL_SoftwareTimeOut;
- }
-
- return HOST_SENDCONTROL_Successful;
-}
-
-uint8_t USB_Host_SendControlRequest(void* const BufferPtr)
-{
- bool BusSuspended = USB_Host_IsBusSuspended();
- uint8_t ReturnStatus = USB_Host_SendControlRequest_PRV(BufferPtr);
-
- Pipe_Freeze();
-
- if (BusSuspended)
- USB_Host_SuspendBus();
-
- Pipe_ResetPipe(PIPE_CONTROLPIPE);
-
- return ReturnStatus;
-}
-
-uint8_t USB_Host_SetDeviceConfiguration(const uint8_t ConfigNumber)
-{
- uint8_t ErrorCode;
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
- .bRequest = REQ_SetConfiguration,
- .wValue = ConfigNumber,
- .wIndex = 0,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- if ((ErrorCode = USB_Host_SendControlRequest(NULL)) == HOST_SENDCONTROL_Successful)
- {
- USB_Host_ConfigurationNumber = ConfigNumber;
- USB_HostState = (ConfigNumber) ? HOST_STATE_Configured : HOST_STATE_Addressed;
- }
-
- return ErrorCode;
-}
-
-uint8_t USB_Host_GetDeviceConfiguration(uint8_t* const ConfigNumber)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
- .bRequest = REQ_GetConfiguration,
- .wValue = 0,
- .wIndex = 0,
- .wLength = sizeof(uint8_t),
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(ConfigNumber);
-}
-
-uint8_t USB_Host_GetDescriptor(const uint8_t Type,
- const uint8_t Index,
- void* const Buffer,
- const uint8_t BufferLength)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
- .bRequest = REQ_GetDescriptor,
- .wValue = (((uint16_t)Type << 8) | Index),
- .wIndex = 0,
- .wLength = BufferLength,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(Buffer);
-}
-
-uint8_t USB_Host_GetDeviceStatus(uint8_t* const FeatureStatus)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
- .bRequest = REQ_GetStatus,
- .wValue = 0,
- .wIndex = 0,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(FeatureStatus);
-}
-
-uint8_t USB_Host_ClearEndpointStall(const uint8_t EndpointAddress)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_ENDPOINT),
- .bRequest = REQ_ClearFeature,
- .wValue = FEATURE_SEL_EndpointHalt,
- .wIndex = EndpointAddress,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(NULL);
-}
-
-uint8_t USB_Host_SetInterfaceAltSetting(const uint8_t InterfaceIndex,
- const uint8_t AltSetting)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_INTERFACE),
- .bRequest = REQ_SetInterface,
- .wValue = AltSetting,
- .wIndex = InterfaceIndex,
- .wLength = 0,
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(NULL);
-}
-
-uint8_t USB_Host_GetInterfaceAltSetting(const uint8_t InterfaceIndex,
- uint8_t* const AltSetting)
-{
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_INTERFACE),
- .bRequest = REQ_GetInterface,
- .wValue = 0,
- .wIndex = InterfaceIndex,
- .wLength = sizeof(uint8_t),
- };
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- return USB_Host_SendControlRequest(AltSetting);
-}
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/HostStandardReq.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/HostStandardReq.h deleted file mode 100644 index cdfb35470..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/HostStandardReq.h +++ /dev/null @@ -1,292 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB host standard request management.
- *
- * This file contains the function prototypes necessary for the issuing of outgoing standard control requests
- * when the library is in USB host mode.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-#ifndef __HOSTSTDREQ_H__
-#define __HOSTSTDREQ_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
- #include "StdRequestType.h"
- #include "USBController.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if !defined(USB_HOST_TIMEOUT_MS) || defined(__DOXYGEN__)
- /** Constant for the maximum software timeout period of sent USB control transactions to an attached
- * device. If a device fails to respond to a sent control request within this period, the
- * library will return a timeout error code.
- *
- * This value may be overridden in the user project makefile as the value of the
- * \ref USB_HOST_TIMEOUT_MS token, and passed to the compiler using the -D switch.
- */
- #define USB_HOST_TIMEOUT_MS 1000
- #endif
-
- /* Enums: */
- /** Enum for the \ref USB_Host_SendControlRequest() return code, indicating the reason for the error
- * if the transfer of the request is unsuccessful.
- *
- * \ingroup Group_PipeControlReq
- */
- enum USB_Host_SendControlErrorCodes_t
- {
- HOST_SENDCONTROL_Successful = 0, /**< No error occurred in the request transfer. */
- HOST_SENDCONTROL_DeviceDisconnected = 1, /**< The attached device was disconnected during the
- * request transfer.
- */
- HOST_SENDCONTROL_PipeError = 2, /**< An error occurred in the pipe while sending the request. */
- HOST_SENDCONTROL_SetupStalled = 3, /**< The attached device stalled the request, usually
- * indicating that the request is unsupported on the device.
- */
- HOST_SENDCONTROL_SoftwareTimeOut = 4, /**< The request or data transfer timed out. */
- };
-
- /* Global Variables: */
- /** Indicates the currently set configuration number of the attached device. This indicates the currently
- * selected configuration value if one has been set successfully, or 0 if no configuration has been selected.
- *
- * To set a device configuration, call the \ref USB_Host_SetDeviceConfiguration() function.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- *
- * \ingroup Group_Host
- */
- extern uint8_t USB_Host_ConfigurationNumber;
-
- /* Function Prototypes: */
- /** Sends the request stored in the \ref USB_ControlRequest global structure to the attached device,
- * and transfers the data stored in the buffer to the device, or from the device to the buffer
- * as requested. The transfer is made on the currently selected pipe.
- *
- * \ingroup Group_PipeControlReq
- *
- * \param[in] BufferPtr Pointer to the start of the data buffer if the request has a data stage, or
- * \c NULL if the request transfers no data to or from the device.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
- */
- uint8_t USB_Host_SendControlRequest(void* const BufferPtr);
-
- /** Sends a SET CONFIGURATION standard request to the attached device, with the given configuration index.
- *
- * This routine will automatically update the \ref USB_HostState and \ref USB_Host_ConfigurationNumber
- * state variables according to the given function parameters and the result of the request.
- *
- * \note After this routine returns, the control pipe will be selected.
- *
- * \ingroup Group_PipeControlReq
- *
- * \param[in] ConfigNumber Configuration index to send to the device.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
- */
- uint8_t USB_Host_SetDeviceConfiguration(const uint8_t ConfigNumber);
-
- /** Sends a GET CONFIGURATION standard request to the attached device, to retrieve the currently selected
- * device configuration index.
- *
- * \note After this routine returns, the control pipe will be selected.
- *
- * \ingroup Group_PipeControlReq
- *
- * \param[out] ConfigNumber Pointer to a location where the retrieved configuration index should be stored.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
- */
- uint8_t USB_Host_GetDeviceConfiguration(uint8_t* const ConfigNumber) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Sends a GET DESCRIPTOR standard request to the attached device, requesting the descriptor of the
- * specified type and index.
- *
- * \note After this routine returns, the control pipe will be selected.
- *
- * \ingroup Group_PipeControlReq
- *
- * \param[in] Type Type of descriptor to retrieve, a value from the \ref USB_DescriptorTypes_t enum.
- * \param[in] Index Index of the descriptor to retrieve.
- * \param[out] Buffer Pointer to the destination buffer where the retrieved string descriptor is to be stored.
- * \param[in] BufferLength Maximum size of the string descriptor which can be stored into the buffer.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
- */
- uint8_t USB_Host_GetDescriptor(const uint8_t Type,
- const uint8_t Index,
- void* const Buffer,
- const uint8_t BufferLength) ATTR_NON_NULL_PTR_ARG(3);
-
- /** Retrieves the current feature status of the attached device, via a GET STATUS standard request. The
- * retrieved feature status can then be examined by masking the retrieved value with the various
- * \c FEATURE_* masks for bus/self power information and remote wakeup support.
- *
- * \note After this routine returns, the control pipe will be selected.
- *
- * \ingroup Group_PipeControlReq
- *
- * \param[out] FeatureStatus Location where the retrieved feature status should be stored.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
- */
- uint8_t USB_Host_GetDeviceStatus(uint8_t* const FeatureStatus) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Clears a stall condition on the given pipe, via a CLEAR FEATURE standard request to the attached device.
- *
- * \note After this routine returns, the control pipe will be selected.
- *
- * \ingroup Group_PipeControlReq
- *
- * \param[in] EndpointAddress Address of the endpoint to clear, including the endpoint's direction.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
- */
- uint8_t USB_Host_ClearEndpointStall(const uint8_t EndpointAddress);
-
- /** Selects a given alternative setting for the specified interface, via a SET INTERFACE standard request to
- * the attached device.
- *
- * \note After this routine returns, the control pipe will be selected.
- *
- * \ingroup Group_PipeControlReq
- *
- * \param[in] InterfaceIndex Index of the interface whose alternative setting is to be altered.
- * \param[in] AltSetting Index of the interface's alternative setting which is to be selected.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
- */
- uint8_t USB_Host_SetInterfaceAltSetting(const uint8_t InterfaceIndex,
- const uint8_t AltSetting);
-
-
- /** Retrieves the current alternative setting for the specified interface, via a GET INTERFACE standard request to
- * the attached device.
- *
- * \note After this routine returns, the control pipe will be selected.
- *
- * \ingroup Group_PipeControlReq
- *
- * \param[in] InterfaceIndex Index of the interface whose alternative setting is to be altered.
- * \param[out] AltSetting Pointer to a location where the retrieved alternative setting value should be stored.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
- */
- uint8_t USB_Host_GetInterfaceAltSetting(const uint8_t InterfaceIndex,
- uint8_t* const AltSetting) ATTR_NON_NULL_PTR_ARG(2);
-
- /* Inline Functions: */
- /** Sends a GET DESCRIPTOR standard request to the attached device, requesting the device descriptor.
- * This can be used to easily retrieve information about the device such as its VID, PID and power
- * requirements. This is a convenience wrapper for \ref USB_Host_GetDescriptor().
- *
- * \note After this routine returns, the control pipe will be selected.
- *
- * \ingroup Group_PipeControlReq
- *
- * \param[out] DeviceDescriptorPtr Pointer to the destination device descriptor structure where
- * the read data is to be stored.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
- */
- static inline uint8_t USB_Host_GetDeviceDescriptor(USB_Descriptor_Device_t* const DeviceDescriptorPtr) ATTR_NON_NULL_PTR_ARG(1);
- static inline uint8_t USB_Host_GetDeviceDescriptor(USB_Descriptor_Device_t* const DeviceDescriptorPtr)
- {
- return USB_Host_GetDescriptor(DTYPE_Device, 0, DeviceDescriptorPtr, sizeof(USB_Descriptor_Device_t));
- }
-
- /** Sends a GET DESCRIPTOR standard request to the attached device, requesting the string descriptor
- * of the specified index. This can be used to easily retrieve string descriptors from the device by
- * index, after the index is obtained from the Device or Configuration descriptors. This is a convenience
- * wrapper for \ref USB_Host_GetDescriptor().
- *
- * \note After this routine returns, the control pipe will be selected.
- *
- * \ingroup Group_PipeControlReq
- *
- * \param[in] Index Index of the string descriptor to retrieve.
- * \param[out] Buffer Pointer to the destination buffer where the retrieved string descriptor is
- * to be stored.
- * \param[in] BufferLength Maximum size of the string descriptor which can be stored into the buffer.
- *
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.
- */
- static inline uint8_t USB_Host_GetDeviceStringDescriptor(const uint8_t Index,
- void* const Buffer,
- const uint8_t BufferLength) ATTR_NON_NULL_PTR_ARG(2);
- static inline uint8_t USB_Host_GetDeviceStringDescriptor(const uint8_t Index,
- void* const Buffer,
- const uint8_t BufferLength)
- {
- return USB_Host_GetDescriptor(DTYPE_String, Index, Buffer, BufferLength);
- }
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Enums: */
- enum USB_WaitForTypes_t
- {
- USB_HOST_WAITFOR_SetupSent,
- USB_HOST_WAITFOR_InReceived,
- USB_HOST_WAITFOR_OutReady,
- };
-
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_HOSTSTDREQ_C)
- static uint8_t USB_Host_SendControlRequest_PRV(void* const BufferPtr);
- static uint8_t USB_Host_WaitForIOS(const uint8_t WaitType);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/OTG.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/OTG.h deleted file mode 100644 index ccd7cc1be..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/OTG.h +++ /dev/null @@ -1,80 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common USB OTG definitions for all architectures.
- * \copydetails Group_OTG
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_OTG USB On The Go (OTG) Management
- * \brief USB OTG management definitions.
- *
- * This module contains macros for embedded USB hosts with dual role On The Go capabilities, for managing role
- * exchange. OTG is a way for two USB dual role devices to talk to one another directly without fixed device/host
- * roles.
- *
- * @{
- */
-
-#ifndef __USBOTG_H__
-#define __USBOTG_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Architecture Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/OTG_AVR8.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Pipe.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Pipe.h deleted file mode 100644 index ce2be5492..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/Pipe.h +++ /dev/null @@ -1,144 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common USB Pipe definitions for all architectures.
- * \copydetails Group_PipeManagement
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_PipeManagement
- * \defgroup Group_PipeRW Pipe Data Reading and Writing
- * \brief Pipe data read/write definitions.
- *
- * Functions, macros, variables, enums and types related to data reading and writing from and to pipes.
- */
-
-/** \ingroup Group_PipeRW
- * \defgroup Group_PipePrimitiveRW Read/Write of Primitive Data Types
- * \brief Pipe data primitive read/write definitions.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
- * from and to pipes.
- */
-
-/** \ingroup Group_PipeManagement
- * \defgroup Group_PipePacketManagement Pipe Packet Management
- * \brief Pipe packet management definitions.
- *
- * Functions, macros, variables, enums and types related to packet management of pipes.
- */
-
-/** \ingroup Group_PipeManagement
- * \defgroup Group_PipeControlReq Pipe Control Request Management
- * \brief Pipe control request definitions.
- *
- * Module for host mode request processing. This module allows for the transmission of standard, class and
- * vendor control requests to the default control endpoint of an attached device while in host mode.
- *
- * \see Chapter 9 of the USB 2.0 specification.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_PipeManagement Pipe Management
- * \brief Pipe management definitions.
- *
- * This module contains functions, macros and enums related to pipe management when in USB Host mode. This
- * module contains the pipe management macros, as well as pipe interrupt and data send/receive functions
- * for various data types.
- *
- * @{
- */
-
-#ifndef __PIPE_H__
-#define __PIPE_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Type Defines: */
- /** Type define for a pipe table entry, used to configure pipes in groups via
- * \ref Pipe_ConfigurePipeTable().
- */
- typedef struct
- {
- uint8_t Address; /**< Address of the pipe to configure, or zero if the table entry is to be unused. */
- uint16_t Size; /**< Size of the pipe bank, in bytes. */
- uint8_t EndpointAddress; /** Address of the endpoint in the connected device. */
- uint8_t Type; /**< Type of the endpoint, a \c EP_TYPE_* mask. */
- uint8_t Banks; /**< Number of hardware banks to use for the pipe. */
- } USB_Pipe_Table_t;
-
- /* Macros: */
- /** Pipe address for the default control pipe, which always resides in address 0. This is
- * defined for convenience to give more readable code when used with the pipe macros.
- */
- #define PIPE_CONTROLPIPE 0
-
- /** Pipe number mask, for masking against pipe addresses to retrieve the pipe's numerical address
- * in the device.
- */
- #define PIPE_PIPENUM_MASK 0x0F
-
- /** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's
- * numerical address in the attached device.
- */
- #define PIPE_EPNUM_MASK 0x0F
-
- /* Architecture Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/Pipe_AVR8.h"
- #elif (ARCH == ARCH_UC3)
- #include "UC3/Pipe_UC3.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/PipeStream.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/PipeStream.h deleted file mode 100644 index 002d6ff1e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/PipeStream.h +++ /dev/null @@ -1,100 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Pipe data stream transmission and reception management.
- * \copydetails Group_PipeStreamRW
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_PipeRW
- * \defgroup Group_PipeStreamRW Read/Write of Multi-Byte Streams
- * \brief Pipe data stream transmission and reception management.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of data streams from
- * and to pipes.
- *
- * @{
- */
-
-#ifndef __PIPE_STREAM_H__
-#define __PIPE_STREAM_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Enums: */
- /** Enum for the possible error return codes of the Pipe_*_Stream_* functions. */
- enum Pipe_Stream_RW_ErrorCodes_t
- {
- PIPE_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */
- PIPE_RWSTREAM_PipeStalled = 1, /**< The device stalled the pipe during the transfer. */
- PIPE_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
- * the transfer.
- */
- PIPE_RWSTREAM_Timeout = 3, /**< The device failed to accept or send the next packet
- * within the software timeout period set by the
- * \ref USB_STREAM_TIMEOUT_MS macro.
- */
- PIPE_RWSTREAM_IncompleteTransfer = 4, /**< Indicates that the pipe bank became full/empty before the
- * complete contents of the stream could be transferred.
- */
- };
-
- /* Architecture Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/PipeStream_AVR8.h"
- #elif (ARCH == ARCH_UC3)
- #include "UC3/PipeStream_UC3.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/StdDescriptors.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/StdDescriptors.h deleted file mode 100644 index 012399e96..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/StdDescriptors.h +++ /dev/null @@ -1,739 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common standard USB Descriptor definitions for all architectures.
- * \copydetails Group_StdDescriptors
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_StdDescriptors USB Descriptors
- * \brief Standard USB Descriptor definitions.
- *
- * Standard USB device descriptor defines and retrieval routines, for USB devices. This module contains
- * structures and macros for the easy creation of standard USB descriptors in USB device projects.
- *
- * @{
- */
-
-#ifndef __USBDESCRIPTORS_H__
-#define __USBDESCRIPTORS_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
- #include "Events.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Indicates that a given descriptor does not exist in the device. This can be used inside descriptors
- * for string descriptor indexes, or may be use as a return value for GetDescriptor when the specified
- * descriptor does not exist.
- */
- #define NO_DESCRIPTOR 0
-
- /** Macro to calculate the power value for the configuration descriptor, from a given number of milliamperes.
- *
- * \param[in] mA Maximum number of milliamps the device consumes when the given configuration is selected.
- */
- #define USB_CONFIG_POWER_MA(mA) ((mA) >> 1)
-
- /** Macro to calculate the Unicode length of a string with a given number of Unicode characters.
- * Should be used in string descriptor's headers for giving the string descriptor's byte length.
- *
- * \param[in] UnicodeChars Number of Unicode characters in the string text.
- */
- #define USB_STRING_LEN(UnicodeChars) (sizeof(USB_Descriptor_Header_t) + ((UnicodeChars) << 1))
-
- /** Macro to encode a given four digit floating point version number (e.g. 01.23) into Binary Coded
- * Decimal format for descriptor fields requiring BCD encoding, such as the USB version number in the
- * standard device descriptor.
- *
- * \note This value is automatically converted into Little Endian, suitable for direct use inside device
- * descriptors on all architectures without endianness conversion macros.
- *
- * \param[in] x Version number to encode as a 16-bit little-endian number, as a floating point number.
- */
- #define VERSION_BCD(x) CPU_TO_LE16((VERSION_TENS(x) << 12) | (VERSION_ONES(x) << 8) | \
- (VERSION_TENTHS(x) << 4) | (VERSION_HUNDREDTHS(x) << 0) )
-
- /** String language ID for the English language. Should be used in \ref USB_Descriptor_String_t descriptors
- * to indicate that the English language is supported by the device in its string descriptors.
- */
- #define LANGUAGE_ID_ENG 0x0409
-
- /** \name USB Configuration Descriptor Attribute Masks */
- //@{
- /** Mask for the reserved bit in the Configuration Descriptor's \c ConfigAttributes field, which must be set on all
- * devices for historical purposes.
- */
- #define USB_CONFIG_ATTR_RESERVED 0x80
-
- /** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t
- * descriptor's \c ConfigAttributes value to indicate that the specified configuration can draw its power
- * from the device's own power source.
- */
- #define USB_CONFIG_ATTR_SELFPOWERED 0x40
-
- /** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t
- * descriptor's \c ConfigAttributes value to indicate that the specified configuration supports the
- * remote wakeup feature of the USB standard, allowing a suspended USB device to wake up the host upon
- * request.
- */
- #define USB_CONFIG_ATTR_REMOTEWAKEUP 0x20
- //@}
-
- /** \name Endpoint Descriptor Attribute Masks */
- //@{
- /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
- * \c Attributes value to indicate that the specified endpoint is not synchronized.
- *
- * \see The USB specification for more details on the possible Endpoint attributes.
- */
- #define ENDPOINT_ATTR_NO_SYNC (0 << 2)
-
- /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
- * \c Attributes value to indicate that the specified endpoint is asynchronous.
- *
- * \see The USB specification for more details on the possible Endpoint attributes.
- */
- #define ENDPOINT_ATTR_ASYNC (1 << 2)
-
- /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
- * \c Attributes value to indicate that the specified endpoint is adaptive.
- *
- * \see The USB specification for more details on the possible Endpoint attributes.
- */
- #define ENDPOINT_ATTR_ADAPTIVE (2 << 2)
-
- /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
- * \c Attributes value to indicate that the specified endpoint is synchronized.
- *
- * \see The USB specification for more details on the possible Endpoint attributes.
- */
- #define ENDPOINT_ATTR_SYNC (3 << 2)
- //@}
-
- /** \name Endpoint Descriptor Usage Masks */
- //@{
- /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
- * \c Attributes value to indicate that the specified endpoint is used for data transfers.
- *
- * \see The USB specification for more details on the possible Endpoint usage attributes.
- */
- #define ENDPOINT_USAGE_DATA (0 << 4)
-
- /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
- * \c Attributes value to indicate that the specified endpoint is used for feedback.
- *
- * \see The USB specification for more details on the possible Endpoint usage attributes.
- */
- #define ENDPOINT_USAGE_FEEDBACK (1 << 4)
-
- /** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's
- * \c Attributes value to indicate that the specified endpoint is used for implicit feedback.
- *
- * \see The USB specification for more details on the possible Endpoint usage attributes.
- */
- #define ENDPOINT_USAGE_IMPLICIT_FEEDBACK (2 << 4)
- //@}
-
- /* Enums: */
- /** Enum for the possible standard descriptor types, as given in each descriptor's header. */
- enum USB_DescriptorTypes_t
- {
- DTYPE_Device = 0x01, /**< Indicates that the descriptor is a device descriptor. */
- DTYPE_Configuration = 0x02, /**< Indicates that the descriptor is a configuration descriptor. */
- DTYPE_String = 0x03, /**< Indicates that the descriptor is a string descriptor. */
- DTYPE_Interface = 0x04, /**< Indicates that the descriptor is an interface descriptor. */
- DTYPE_Endpoint = 0x05, /**< Indicates that the descriptor is an endpoint descriptor. */
- DTYPE_DeviceQualifier = 0x06, /**< Indicates that the descriptor is a device qualifier descriptor. */
- DTYPE_Other = 0x07, /**< Indicates that the descriptor is of other type. */
- DTYPE_InterfacePower = 0x08, /**< Indicates that the descriptor is an interface power descriptor. */
- DTYPE_InterfaceAssociation = 0x0B, /**< Indicates that the descriptor is an interface association descriptor. */
- DTYPE_CSInterface = 0x24, /**< Indicates that the descriptor is a class specific interface descriptor. */
- DTYPE_CSEndpoint = 0x25, /**< Indicates that the descriptor is a class specific endpoint descriptor. */
- };
-
- /** Enum for possible Class, Subclass and Protocol values of device and interface descriptors. */
- enum USB_Descriptor_ClassSubclassProtocol_t
- {
- USB_CSCP_NoDeviceClass = 0x00, /**< Descriptor Class value indicating that the device does not belong
- * to a particular class at the device level.
- */
- USB_CSCP_NoDeviceSubclass = 0x00, /**< Descriptor Subclass value indicating that the device does not belong
- * to a particular subclass at the device level.
- */
- USB_CSCP_NoDeviceProtocol = 0x00, /**< Descriptor Protocol value indicating that the device does not belong
- * to a particular protocol at the device level.
- */
- USB_CSCP_VendorSpecificClass = 0xFF, /**< Descriptor Class value indicating that the device/interface belongs
- * to a vendor specific class.
- */
- USB_CSCP_VendorSpecificSubclass = 0xFF, /**< Descriptor Subclass value indicating that the device/interface belongs
- * to a vendor specific subclass.
- */
- USB_CSCP_VendorSpecificProtocol = 0xFF, /**< Descriptor Protocol value indicating that the device/interface belongs
- * to a vendor specific protocol.
- */
- USB_CSCP_IADDeviceClass = 0xEF, /**< Descriptor Class value indicating that the device belongs to the
- * Interface Association Descriptor class.
- */
- USB_CSCP_IADDeviceSubclass = 0x02, /**< Descriptor Subclass value indicating that the device belongs to the
- * Interface Association Descriptor subclass.
- */
- USB_CSCP_IADDeviceProtocol = 0x01, /**< Descriptor Protocol value indicating that the device belongs to the
- * Interface Association Descriptor protocol.
- */
- };
-
- /* Type Defines: */
- /** \brief Standard USB Descriptor Header (LUFA naming conventions).
- *
- * Type define for all descriptors' standard header, indicating the descriptor's length and type. This structure
- * uses LUFA-specific element names to make each element's purpose clearer.
- *
- * \see \ref USB_StdDescriptor_Header_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t Size; /**< Size of the descriptor, in bytes. */
- uint8_t Type; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
- } ATTR_PACKED USB_Descriptor_Header_t;
-
- /** \brief Standard USB Descriptor Header (USB-IF naming conventions).
- *
- * Type define for all descriptors' standard header, indicating the descriptor's length and type. This structure
- * uses the relevant standard's given element names to ensure compatibility with the standard.
- *
- * \see \ref USB_Descriptor_Header_t for the version of this type with non-standard LUFA specific element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
- } ATTR_PACKED USB_StdDescriptor_Header_t;
-
- /** \brief Standard USB Device Descriptor (LUFA naming conventions).
- *
- * Type define for a standard Device Descriptor. This structure uses LUFA-specific element names to make each
- * element's purpose clearer.
- *
- * \see \ref USB_StdDescriptor_Device_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */
-
- uint16_t USBSpecification; /**< BCD of the supported USB specification. */
- uint8_t Class; /**< USB device class. */
- uint8_t SubClass; /**< USB device subclass. */
- uint8_t Protocol; /**< USB device protocol. */
-
- uint8_t Endpoint0Size; /**< Size of the control (address 0) endpoint's bank in bytes. */
-
- uint16_t VendorID; /**< Vendor ID for the USB product. */
- uint16_t ProductID; /**< Unique product ID for the USB product. */
- uint16_t ReleaseNumber; /**< Product release (version) number. */
-
- uint8_t ManufacturerStrIndex; /**< String index for the manufacturer's name. The
- * host will request this string via a separate
- * control request for the string descriptor.
- *
- * \note If no string supplied, use \ref NO_DESCRIPTOR.
- */
- uint8_t ProductStrIndex; /**< String index for the product name/details.
- *
- * \see ManufacturerStrIndex structure entry.
- */
- uint8_t SerialNumStrIndex; /**< String index for the product's globally unique hexadecimal
- * serial number, in uppercase Unicode ASCII.
- *
- * \note On some microcontroller models, there is an embedded serial number
- * in the chip which can be used for the device serial number.
- * To use this serial number, set this to USE_INTERNAL_SERIAL.
- * On unsupported devices, this will evaluate to 0 and will cause
- * the host to generate a pseudo-unique value for the device upon
- * insertion.
- *
- * \see ManufacturerStrIndex structure entry.
- */
- uint8_t NumberOfConfigurations; /**< Total number of configurations supported by
- * the device.
- */
- } ATTR_PACKED USB_Descriptor_Device_t;
-
- /** \brief Standard USB Device Descriptor (USB-IF naming conventions).
- *
- * Type define for a standard Device Descriptor. This structure uses the relevant standard's given element names
- * to ensure compatibility with the standard.
- *
- * \see \ref USB_Descriptor_Device_t for the version of this type with non-standard LUFA specific element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
- uint16_t bcdUSB; /**< BCD of the supported USB specification. */
- uint8_t bDeviceClass; /**< USB device class. */
- uint8_t bDeviceSubClass; /**< USB device subclass. */
- uint8_t bDeviceProtocol; /**< USB device protocol. */
- uint8_t bMaxPacketSize0; /**< Size of the control (address 0) endpoint's bank in bytes. */
- uint16_t idVendor; /**< Vendor ID for the USB product. */
- uint16_t idProduct; /**< Unique product ID for the USB product. */
- uint16_t bcdDevice; /**< Product release (version) number. */
- uint8_t iManufacturer; /**< String index for the manufacturer's name. The
- * host will request this string via a separate
- * control request for the string descriptor.
- *
- * \note If no string supplied, use \ref NO_DESCRIPTOR.
- */
- uint8_t iProduct; /**< String index for the product name/details.
- *
- * \see ManufacturerStrIndex structure entry.
- */
- uint8_t iSerialNumber; /**< String index for the product's globally unique hexadecimal
- * serial number, in uppercase Unicode ASCII.
- *
- * \note On some microcontroller models, there is an embedded serial number
- * in the chip which can be used for the device serial number.
- * To use this serial number, set this to USE_INTERNAL_SERIAL.
- * On unsupported devices, this will evaluate to 0 and will cause
- * the host to generate a pseudo-unique value for the device upon
- * insertion.
- *
- * \see ManufacturerStrIndex structure entry.
- */
- uint8_t bNumConfigurations; /**< Total number of configurations supported by
- * the device.
- */
- } ATTR_PACKED USB_StdDescriptor_Device_t;
-
- /** \brief Standard USB Device Qualifier Descriptor (LUFA naming conventions).
- *
- * Type define for a standard Device Qualifier Descriptor. This structure uses LUFA-specific element names
- * to make each element's purpose clearer.
- *
- * \see \ref USB_StdDescriptor_DeviceQualifier_t for the version of this type with standard element names.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */
-
- uint16_t USBSpecification; /**< BCD of the supported USB specification. */
- uint8_t Class; /**< USB device class. */
- uint8_t SubClass; /**< USB device subclass. */
- uint8_t Protocol; /**< USB device protocol. */
-
- uint8_t Endpoint0Size; /**< Size of the control (address 0) endpoint's bank in bytes. */
- uint8_t NumberOfConfigurations; /**< Total number of configurations supported by
- * the device.
- */
- uint8_t Reserved; /**< Reserved for future use, must be 0. */
- } ATTR_PACKED USB_Descriptor_DeviceQualifier_t;
-
- /** \brief Standard USB Device Qualifier Descriptor (USB-IF naming conventions).
- *
- * Type define for a standard Device Qualifier Descriptor. This structure uses the relevant standard's given element names
- * to ensure compatibility with the standard.
- *
- * \see \ref USB_Descriptor_DeviceQualifier_t for the version of this type with non-standard LUFA specific element names.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
- uint16_t bcdUSB; /**< BCD of the supported USB specification. */
- uint8_t bDeviceClass; /**< USB device class. */
- uint8_t bDeviceSubClass; /**< USB device subclass. */
- uint8_t bDeviceProtocol; /**< USB device protocol. */
- uint8_t bMaxPacketSize0; /**< Size of the control (address 0) endpoint's bank in bytes. */
- uint8_t bNumConfigurations; /**< Total number of configurations supported by
- * the device.
- */
- uint8_t bReserved; /**< Reserved for future use, must be 0. */
- } ATTR_PACKED USB_StdDescriptor_DeviceQualifier_t;
-
- /** \brief Standard USB Configuration Descriptor (LUFA naming conventions).
- *
- * Type define for a standard Configuration Descriptor header. This structure uses LUFA-specific element names
- * to make each element's purpose clearer.
- *
- * \see \ref USB_StdDescriptor_Configuration_Header_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */
-
- uint16_t TotalConfigurationSize; /**< Size of the configuration descriptor header,
- * and all sub descriptors inside the configuration.
- */
- uint8_t TotalInterfaces; /**< Total number of interfaces in the configuration. */
-
- uint8_t ConfigurationNumber; /**< Configuration index of the current configuration. */
- uint8_t ConfigurationStrIndex; /**< Index of a string descriptor describing the configuration. */
-
- uint8_t ConfigAttributes; /**< Configuration attributes, comprised of a mask of \c USB_CONFIG_ATTR_* masks.
- * On all devices, this should include USB_CONFIG_ATTR_RESERVED at a minimum.
- */
-
- uint8_t MaxPowerConsumption; /**< Maximum power consumption of the device while in the
- * current configuration, calculated by the \ref USB_CONFIG_POWER_MA()
- * macro.
- */
- } ATTR_PACKED USB_Descriptor_Configuration_Header_t;
-
- /** \brief Standard USB Configuration Descriptor (USB-IF naming conventions).
- *
- * Type define for a standard Configuration Descriptor header. This structure uses the relevant standard's given element names
- * to ensure compatibility with the standard.
- *
- * \see \ref USB_Descriptor_Device_t for the version of this type with non-standard LUFA specific element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
- uint16_t wTotalLength; /**< Size of the configuration descriptor header,
- * and all sub descriptors inside the configuration.
- */
- uint8_t bNumInterfaces; /**< Total number of interfaces in the configuration. */
- uint8_t bConfigurationValue; /**< Configuration index of the current configuration. */
- uint8_t iConfiguration; /**< Index of a string descriptor describing the configuration. */
- uint8_t bmAttributes; /**< Configuration attributes, comprised of a mask of \c USB_CONFIG_ATTR_* masks.
- * On all devices, this should include USB_CONFIG_ATTR_RESERVED at a minimum.
- */
- uint8_t bMaxPower; /**< Maximum power consumption of the device while in the
- * current configuration, calculated by the \ref USB_CONFIG_POWER_MA()
- * macro.
- */
- } ATTR_PACKED USB_StdDescriptor_Configuration_Header_t;
-
- /** \brief Standard USB Interface Descriptor (LUFA naming conventions).
- *
- * Type define for a standard Interface Descriptor. This structure uses LUFA-specific element names
- * to make each element's purpose clearer.
- *
- * \see \ref USB_StdDescriptor_Interface_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */
-
- uint8_t InterfaceNumber; /**< Index of the interface in the current configuration. */
- uint8_t AlternateSetting; /**< Alternate setting for the interface number. The same
- * interface number can have multiple alternate settings
- * with different endpoint configurations, which can be
- * selected by the host.
- */
- uint8_t TotalEndpoints; /**< Total number of endpoints in the interface. */
-
- uint8_t Class; /**< Interface class ID. */
- uint8_t SubClass; /**< Interface subclass ID. */
- uint8_t Protocol; /**< Interface protocol ID. */
-
- uint8_t InterfaceStrIndex; /**< Index of the string descriptor describing the interface. */
- } ATTR_PACKED USB_Descriptor_Interface_t;
-
- /** \brief Standard USB Interface Descriptor (USB-IF naming conventions).
- *
- * Type define for a standard Interface Descriptor. This structure uses the relevant standard's given element names
- * to ensure compatibility with the standard.
- *
- * \see \ref USB_Descriptor_Interface_t for the version of this type with non-standard LUFA specific element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
- uint8_t bInterfaceNumber; /**< Index of the interface in the current configuration. */
- uint8_t bAlternateSetting; /**< Alternate setting for the interface number. The same
- * interface number can have multiple alternate settings
- * with different endpoint configurations, which can be
- * selected by the host.
- */
- uint8_t bNumEndpoints; /**< Total number of endpoints in the interface. */
- uint8_t bInterfaceClass; /**< Interface class ID. */
- uint8_t bInterfaceSubClass; /**< Interface subclass ID. */
- uint8_t bInterfaceProtocol; /**< Interface protocol ID. */
- uint8_t iInterface; /**< Index of the string descriptor describing the
- * interface.
- */
- } ATTR_PACKED USB_StdDescriptor_Interface_t;
-
- /** \brief Standard USB Interface Association Descriptor (LUFA naming conventions).
- *
- * Type define for a standard Interface Association Descriptor. This structure uses LUFA-specific element names
- * to make each element's purpose clearer.
- *
- * This descriptor has been added as a supplement to the USB2.0 standard, in the ECN located at
- * <a>http://www.usb.org/developers/docs/InterfaceAssociationDescriptor_ecn.pdf</a>. It allows composite
- * devices with multiple interfaces related to the same function to have the multiple interfaces bound
- * together at the point of enumeration, loading one generic driver for all the interfaces in the single
- * function. Read the ECN for more information.
- *
- * \see \ref USB_StdDescriptor_Interface_Association_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */
-
- uint8_t FirstInterfaceIndex; /**< Index of the first associated interface. */
- uint8_t TotalInterfaces; /**< Total number of associated interfaces. */
-
- uint8_t Class; /**< Interface class ID. */
- uint8_t SubClass; /**< Interface subclass ID. */
- uint8_t Protocol; /**< Interface protocol ID. */
-
- uint8_t IADStrIndex; /**< Index of the string descriptor describing the
- * interface association.
- */
- } ATTR_PACKED USB_Descriptor_Interface_Association_t;
-
- /** \brief Standard USB Interface Association Descriptor (USB-IF naming conventions).
- *
- * Type define for a standard Interface Association Descriptor. This structure uses the relevant standard's given
- * element names to ensure compatibility with the standard.
- *
- * This descriptor has been added as a supplement to the USB2.0 standard, in the ECN located at
- * <a>http://www.usb.org/developers/docs/InterfaceAssociationDescriptor_ecn.pdf</a>. It allows composite
- * devices with multiple interfaces related to the same function to have the multiple interfaces bound
- * together at the point of enumeration, loading one generic driver for all the interfaces in the single
- * function. Read the ECN for more information.
- *
- * \see \ref USB_Descriptor_Interface_Association_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value
- * given by the specific class.
- */
- uint8_t bFirstInterface; /**< Index of the first associated interface. */
- uint8_t bInterfaceCount; /**< Total number of associated interfaces. */
- uint8_t bFunctionClass; /**< Interface class ID. */
- uint8_t bFunctionSubClass; /**< Interface subclass ID. */
- uint8_t bFunctionProtocol; /**< Interface protocol ID. */
- uint8_t iFunction; /**< Index of the string descriptor describing the
- * interface association.
- */
- } ATTR_PACKED USB_StdDescriptor_Interface_Association_t;
-
- /** \brief Standard USB Endpoint Descriptor (LUFA naming conventions).
- *
- * Type define for a standard Endpoint Descriptor. This structure uses LUFA-specific element names
- * to make each element's purpose clearer.
- *
- * \see \ref USB_StdDescriptor_Endpoint_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */
-
- uint8_t EndpointAddress; /**< Logical address of the endpoint within the device for the current
- * configuration, including direction mask.
- */
- uint8_t Attributes; /**< Endpoint attributes, comprised of a mask of the endpoint type (EP_TYPE_*)
- * and attributes (ENDPOINT_ATTR_*) masks.
- */
- uint16_t EndpointSize; /**< Size of the endpoint bank, in bytes. This indicates the maximum packet
- * size that the endpoint can receive at a time.
- */
- uint8_t PollingIntervalMS; /**< Polling interval in milliseconds for the endpoint if it is an INTERRUPT
- * or ISOCHRONOUS type.
- */
- } ATTR_PACKED USB_Descriptor_Endpoint_t;
-
- /** \brief Standard USB Endpoint Descriptor (USB-IF naming conventions).
- *
- * Type define for a standard Endpoint Descriptor. This structure uses the relevant standard's given
- * element names to ensure compatibility with the standard.
- *
- * \see \ref USB_Descriptor_Endpoint_t for the version of this type with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a
- * value given by the specific class.
- */
- uint8_t bEndpointAddress; /**< Logical address of the endpoint within the device for the current
- * configuration, including direction mask.
- */
- uint8_t bmAttributes; /**< Endpoint attributes, comprised of a mask of the endpoint type (EP_TYPE_*)
- * and attributes (ENDPOINT_ATTR_*) masks.
- */
- uint16_t wMaxPacketSize; /**< Size of the endpoint bank, in bytes. This indicates the maximum packet size
- * that the endpoint can receive at a time.
- */
- uint8_t bInterval; /**< Polling interval in milliseconds for the endpoint if it is an INTERRUPT or
- * ISOCHRONOUS type.
- */
- } ATTR_PACKED USB_StdDescriptor_Endpoint_t;
-
- /** \brief Standard USB String Descriptor (LUFA naming conventions).
- *
- * Type define for a standard string descriptor. Unlike other standard descriptors, the length
- * of the descriptor for placement in the descriptor header must be determined by the \ref USB_STRING_LEN()
- * macro rather than by the size of the descriptor structure, as the length is not fixed.
- *
- * This structure should also be used for string index 0, which contains the supported language IDs for
- * the device as an array.
- *
- * This structure uses LUFA-specific element names to make each element's purpose clearer.
- *
- * \see \ref USB_StdDescriptor_String_t for the version of this type with standard element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- USB_Descriptor_Header_t Header; /**< Descriptor header, including type and size. */
-
- #if (((ARCH == ARCH_AVR8) || (ARCH == ARCH_XMEGA)) && !defined(__DOXYGEN__))
- wchar_t UnicodeString[];
- #else
- uint16_t UnicodeString[]; /**< String data, as unicode characters (alternatively,
- * string language IDs). If normal ASCII characters are
- * to be used, they must be added as an array of characters
- * rather than a normal C string so that they are widened to
- * Unicode size.
- *
- * Under GCC, strings prefixed with the "L" character (before
- * the opening string quotation mark) are considered to be
- * Unicode strings, and may be used instead of an explicit
- * array of ASCII characters on little endian devices with
- * UTF-16-LE \c wchar_t encoding.
- */
- #endif
- } ATTR_PACKED USB_Descriptor_String_t;
-
- /** \brief Standard USB String Descriptor (USB-IF naming conventions).
- *
- * Type define for a standard string descriptor. Unlike other standard descriptors, the length
- * of the descriptor for placement in the descriptor header must be determined by the \ref USB_STRING_LEN()
- * macro rather than by the size of the descriptor structure, as the length is not fixed.
- *
- * This structure should also be used for string index 0, which contains the supported language IDs for
- * the device as an array.
- *
- * This structure uses the relevant standard's given element names to ensure compatibility with the standard.
- *
- * \see \ref USB_Descriptor_String_t for the version of this type with with non-standard LUFA specific
- * element names.
- *
- * \note Regardless of CPU architecture, these values should be stored as little endian.
- */
- typedef struct
- {
- uint8_t bLength; /**< Size of the descriptor, in bytes. */
- uint8_t bDescriptorType; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t
- * or a value given by the specific class.
- */
- uint16_t bString[]; /**< String data, as unicode characters (alternatively, string language IDs).
- * If normal ASCII characters are to be used, they must be added as an array
- * of characters rather than a normal C string so that they are widened to
- * Unicode size.
- *
- * Under GCC, strings prefixed with the "L" character (before the opening string
- * quotation mark) are considered to be Unicode strings, and may be used instead
- * of an explicit array of ASCII characters.
- */
- } ATTR_PACKED USB_StdDescriptor_String_t;
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define VERSION_TENS(x) (int)((int)(x) / 10)
- #define VERSION_ONES(x) (int)((int)(x) % 10)
- #define VERSION_TENTHS(x) (int)(((x * 1) - ((int)(x * 1))) * 10)
- #define VERSION_HUNDREDTHS(x) (int)(((x * 10) - ((int)(x * 10))) * 10)
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/StdRequestType.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/StdRequestType.h deleted file mode 100644 index a841f8f3a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/StdRequestType.h +++ /dev/null @@ -1,258 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB control endpoint request definitions.
- * \copydetails Group_StdRequest
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_StdRequest Standard USB Requests
- * \brief USB control endpoint request definitions.
- *
- * This module contains definitions for the various control request parameters, so that the request
- * details (such as data direction, request recipient, etc.) can be extracted via masking.
- *
- * @{
- */
-
-#ifndef __STDREQTYPE_H__
-#define __STDREQTYPE_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Mask for the request type parameter, to indicate the direction of the request data (Host to Device
- * or Device to Host). The result of this mask should then be compared to the request direction masks.
- *
- * \see \c REQDIR_* macros for masks indicating the request data direction.
- */
- #define CONTROL_REQTYPE_DIRECTION 0x80
-
- /** Mask for the request type parameter, to indicate the type of request (Device, Class or Vendor
- * Specific). The result of this mask should then be compared to the request type masks.
- *
- * \see \c REQTYPE_* macros for masks indicating the request type.
- */
- #define CONTROL_REQTYPE_TYPE 0x60
-
- /** Mask for the request type parameter, to indicate the recipient of the request (Device, Interface
- * Endpoint or Other). The result of this mask should then be compared to the request recipient
- * masks.
- *
- * \see \c REQREC_* macros for masks indicating the request recipient.
- */
- #define CONTROL_REQTYPE_RECIPIENT 0x1F
-
- /** \name Control Request Data Direction Masks */
- //@{
- /** Request data direction mask, indicating that the request data will flow from host to device.
- *
- * \see \ref CONTROL_REQTYPE_DIRECTION macro.
- */
- #define REQDIR_HOSTTODEVICE (0 << 7)
-
- /** Request data direction mask, indicating that the request data will flow from device to host.
- *
- * \see \ref CONTROL_REQTYPE_DIRECTION macro.
- */
- #define REQDIR_DEVICETOHOST (1 << 7)
- //@}
-
- /** \name Control Request Type Masks */
- //@{
- /** Request type mask, indicating that the request is a standard request.
- *
- * \see \ref CONTROL_REQTYPE_TYPE macro.
- */
- #define REQTYPE_STANDARD (0 << 5)
-
- /** Request type mask, indicating that the request is a class-specific request.
- *
- * \see \ref CONTROL_REQTYPE_TYPE macro.
- */
- #define REQTYPE_CLASS (1 << 5)
-
- /** Request type mask, indicating that the request is a vendor specific request.
- *
- * \see \ref CONTROL_REQTYPE_TYPE macro.
- */
- #define REQTYPE_VENDOR (2 << 5)
- //@}
-
- /** \name Control Request Recipient Masks */
- //@{
- /** Request recipient mask, indicating that the request is to be issued to the device as a whole.
- *
- * \see \ref CONTROL_REQTYPE_RECIPIENT macro.
- */
- #define REQREC_DEVICE (0 << 0)
-
- /** Request recipient mask, indicating that the request is to be issued to an interface in the
- * currently selected configuration.
- *
- * \see \ref CONTROL_REQTYPE_RECIPIENT macro.
- */
- #define REQREC_INTERFACE (1 << 0)
-
- /** Request recipient mask, indicating that the request is to be issued to an endpoint in the
- * currently selected configuration.
- *
- * \see \ref CONTROL_REQTYPE_RECIPIENT macro.
- */
- #define REQREC_ENDPOINT (2 << 0)
-
- /** Request recipient mask, indicating that the request is to be issued to an unspecified element
- * in the currently selected configuration.
- *
- * \see \ref CONTROL_REQTYPE_RECIPIENT macro.
- */
- #define REQREC_OTHER (3 << 0)
- //@}
-
- /* Type Defines: */
- /** \brief Standard USB Control Request
- *
- * Type define for a standard USB control request.
- *
- * \see The USB 2.0 specification for more information on standard control requests.
- */
- typedef struct
- {
- uint8_t bmRequestType; /**< Type of the request. */
- uint8_t bRequest; /**< Request command code. */
- uint16_t wValue; /**< wValue parameter of the request. */
- uint16_t wIndex; /**< wIndex parameter of the request. */
- uint16_t wLength; /**< Length of the data to transfer in bytes. */
- } ATTR_PACKED USB_Request_Header_t;
-
- /* Enums: */
- /** Enumeration for the various standard request commands. These commands are applicable when the
- * request type is \ref REQTYPE_STANDARD (with the exception of \ref REQ_GetDescriptor, which is always
- * handled regardless of the request type value).
- *
- * \see Chapter 9 of the USB 2.0 Specification.
- */
- enum USB_Control_Request_t
- {
- REQ_GetStatus = 0, /**< Implemented in the library for device and endpoint recipients. Passed
- * to the user application for other recipients via the
- * \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- REQ_ClearFeature = 1, /**< Implemented in the library for device and endpoint recipients. Passed
- * to the user application for other recipients via the
- * \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- REQ_SetFeature = 3, /**< Implemented in the library for device and endpoint recipients. Passed
- * to the user application for other recipients via the
- * \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- REQ_SetAddress = 5, /**< Implemented in the library for the device recipient. Passed
- * to the user application for other recipients via the
- * \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- REQ_GetDescriptor = 6, /**< Implemented in the library for device and interface recipients. Passed to the
- * user application for other recipients via the
- * \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- REQ_SetDescriptor = 7, /**< Not implemented in the library, passed to the user application
- * via the \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- REQ_GetConfiguration = 8, /**< Implemented in the library for the device recipient. Passed
- * to the user application for other recipients via the
- * \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- REQ_SetConfiguration = 9, /**< Implemented in the library for the device recipient. Passed
- * to the user application for other recipients via the
- * \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- REQ_GetInterface = 10, /**< Not implemented in the library, passed to the user application
- * via the \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- REQ_SetInterface = 11, /**< Not implemented in the library, passed to the user application
- * via the \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- REQ_SynchFrame = 12, /**< Not implemented in the library, passed to the user application
- * via the \ref EVENT_USB_Device_ControlRequest() event when received in
- * device mode. */
- };
-
- /** Feature Selector values for Set Feature and Clear Feature standard control requests directed to the device, interface
- * and endpoint recipients.
- */
- enum USB_Feature_Selectors_t
- {
- FEATURE_SEL_EndpointHalt = 0x00, /**< Feature selector for Clear Feature or Set Feature commands. When
- * used in a Set Feature or Clear Feature request this indicates that an
- * endpoint (whose address is given elsewhere in the request) should have
- * its stall condition changed.
- */
- FEATURE_SEL_DeviceRemoteWakeup = 0x01, /**< Feature selector for Device level Remote Wakeup enable set or clear.
- * This feature can be controlled by the host on devices which indicate
- * remote wakeup support in their descriptors to selectively disable or
- * enable remote wakeup.
- */
- FEATURE_SEL_TestMode = 0x02, /**< Feature selector for Test Mode features, used to test the USB controller
- * to check for incorrect operation.
- */
- };
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define FEATURE_SELFPOWERED_ENABLED (1 << 0)
- #define FEATURE_REMOTE_WAKEUP_ENABLED (1 << 1)
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Device_UC3.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Device_UC3.c deleted file mode 100644 index b7c186e80..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Device_UC3.c +++ /dev/null @@ -1,51 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_UC3)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#include "../Device.h"
-
-void USB_Device_SendRemoteWakeup(void)
-{
- USB_CLK_Unfreeze();
-
- AVR32_USBB.UDCON.rmwkup = true;
- while (AVR32_USBB.UDCON.rmwkup);
-}
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Device_UC3.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Device_UC3.h deleted file mode 100644 index 7139d51f0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Device_UC3.h +++ /dev/null @@ -1,260 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Device definitions for the AVR32 UC3 microcontrollers.
- * \copydetails Group_Device_UC3
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_Device
- * \defgroup Group_Device_UC3 Device Management (UC3)
- * \brief USB Device definitions for the AVR32 UC3 microcontrollers.
- *
- * Architecture specific USB Device definitions for the Atmel 32-bit UC3 AVR microcontrollers.
- *
- * @{
- */
-
-#ifndef __USBDEVICE_UC3_H__
-#define __USBDEVICE_UC3_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBController.h"
- #include "../StdDescriptors.h"
- #include "../USBInterrupt.h"
- #include "../Endpoint.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name USB Device Mode Option Masks */
- //@{
- /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
- * USB interface should be initialized in low speed (1.5Mb/s) mode.
- *
- * \note Restrictions apply on the number, size and type of endpoints which can be used
- * when running in low speed mode - please refer to the USB 2.0 specification.
- */
- #define USB_DEVICE_OPT_LOWSPEED (1 << 0)
-
- /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
- * USB interface should be initialized in full speed (12Mb/s) mode.
- */
- #define USB_DEVICE_OPT_FULLSPEED (0 << 0)
-
- #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || defined(__DOXYGEN__)
- /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
- * USB interface should be initialized in high speed (480Mb/s) mode.
- */
- #define USB_DEVICE_OPT_HIGHSPEED (1 << 1)
- #endif
- //@}
-
- #if (!defined(NO_INTERNAL_SERIAL) && \
- (defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || \
- defined(__DOXYGEN__)))
- /** String descriptor index for the device's unique serial number string descriptor within the device.
- * This unique serial number is used by the host to associate resources to the device (such as drivers or COM port
- * number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain
- * a unique serial number internally, and setting the device descriptors serial number string index to this value
- * will cause it to use the internal serial number.
- *
- * On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR and so will force the host to create a pseudo-serial
- * number for the device.
- */
- #define USE_INTERNAL_SERIAL 0xDC
-
- /** Length of the device's unique internal serial number, in bits, if present on the selected microcontroller
- * model.
- */
- #define INTERNAL_SERIAL_LENGTH_BITS 120
-
- /** Start address of the internal serial number, in the appropriate address space, if present on the selected microcontroller
- * model.
- */
- #define INTERNAL_SERIAL_START_ADDRESS 0x80800204
- #else
- #define USE_INTERNAL_SERIAL NO_DESCRIPTOR
-
- #define INTERNAL_SERIAL_LENGTH_BITS 0
- #define INTERNAL_SERIAL_START_ADDRESS 0
- #endif
-
- /* Function Prototypes: */
- /** Sends a Remote Wakeup request to the host. This signals to the host that the device should
- * be taken out of suspended mode, and communications should resume.
- *
- * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the
- * host computer when the host has suspended all USB devices to enter a low power state.
- *
- * \note This function should only be used if the device has indicated to the host that it
- * supports the Remote Wakeup feature in the device descriptors, and should only be
- * issued if the host is currently allowing remote wakeup events from the device (i.e.,
- * the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP
- * compile time option is used, this function is unavailable.
- *
- * \note The USB clock must be running for this function to operate. If the stack is initialized with
- * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running
- * before attempting to call this function.
- *
- * \see \ref Group_StdDescriptors for more information on the RMWAKEUP feature and device descriptors.
- */
- void USB_Device_SendRemoteWakeup(void);
-
- /* Inline Functions: */
- /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host)
- * the frame number is incremented by one.
- *
- * \return Current USB frame number from the USB controller.
- */
- static inline uint16_t USB_Device_GetFrameNumber(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint16_t USB_Device_GetFrameNumber(void)
- {
- return AVR32_USBB.UDFNUM.fnum;
- }
-
- #if !defined(NO_SOF_EVENTS)
- /** Enables the device mode Start Of Frame events. When enabled, this causes the
- * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
- * at the start of each USB frame when enumerated in device mode.
- *
- * \note Not available when the \c NO_SOF_EVENTS compile time token is defined.
- */
- static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_EnableSOFEvents(void)
- {
- USB_INT_Enable(USB_INT_SOFI);
- }
-
- /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
- * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
- *
- * \note Not available when the \c NO_SOF_EVENTS compile time token is defined.
- */
- static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_DisableSOFEvents(void)
- {
- USB_INT_Disable(USB_INT_SOFI);
- }
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Inline Functions: */
- static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_SetLowSpeed(void)
- {
- AVR32_USBB.UDCON.ls = true;
- }
-
- static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_SetFullSpeed(void)
- {
- AVR32_USBB.UDCON.ls = false;
- #if defined(USB_DEVICE_OPT_HIGHSPEED)
- AVR32_USBB.UDCON.spdconf = 3;
- #endif
- }
-
- #if defined(USB_DEVICE_OPT_HIGHSPEED)
- static inline void USB_Device_SetHighSpeed(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_SetHighSpeed(void)
- {
- AVR32_USBB.UDCON.ls = false;
- AVR32_USBB.UDCON.spdconf = 0;
- }
- #endif
-
- static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_SetDeviceAddress(const uint8_t Address)
- {
- AVR32_USBB.UDCON.uadd = Address;
- AVR32_USBB.UDCON.adden = (Address ? true : false);
- }
-
- static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline bool USB_Device_IsAddressSet(void)
- {
- return AVR32_USBB.UDCON.adden;
- }
-
- #if (USE_INTERNAL_SERIAL != NO_DESCRIPTOR)
- static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) ATTR_NON_NULL_PTR_ARG(1);
- static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString)
- {
- uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
- GlobalInterruptDisable();
-
- uint8_t* SigReadAddress = (uint8_t*)INTERNAL_SERIAL_START_ADDRESS;
-
- for (uint8_t SerialCharNum = 0; SerialCharNum < (INTERNAL_SERIAL_LENGTH_BITS / 4); SerialCharNum++)
- {
- uint8_t SerialByte = *SigReadAddress;
-
- if (SerialCharNum & 0x01)
- {
- SerialByte >>= 4;
- SigReadAddress++;
- }
-
- SerialByte &= 0x0F;
-
- UnicodeString[SerialCharNum] = cpu_to_le16((SerialByte >= 10) ?
- (('A' - 10) + SerialByte) : ('0' + SerialByte));
- }
-
- SetGlobalInterruptMask(CurrentGlobalInt);
- }
- #endif
-
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.c deleted file mode 100644 index cc4206cae..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.c +++ /dev/null @@ -1,235 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_UC3)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#include "EndpointStream_UC3.h"
-
-#if !defined(CONTROL_ONLY_DEVICE)
-uint8_t Endpoint_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t ErrorCode;
- uint16_t BytesInTransfer = 0;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- Length -= *BytesProcessed;
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearOUT();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return ENDPOINT_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Endpoint_Discard_8();
-
- Length--;
- BytesInTransfer++;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-uint8_t Endpoint_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t ErrorCode;
- uint16_t BytesInTransfer = 0;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- Length -= *BytesProcessed;
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearIN();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return ENDPOINT_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Endpoint_Write_8(0);
-
- Length--;
- BytesInTransfer++;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations,
- * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_RW.c"
-
-#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE)
- #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-#endif
-
-#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE)
- #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE
- #define TEMPLATE_BUFFER_TYPE void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8())
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE
- #define TEMPLATE_BUFFER_TYPE void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8())
- #include "Template/Template_Endpoint_RW.c"
-#endif
-
-#endif
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_Control_W.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_Control_W.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_Control_R.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_Control_R.c"
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h deleted file mode 100644 index b360b4da4..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/EndpointStream_UC3.h +++ /dev/null @@ -1,434 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Endpoint data stream transmission and reception management for the AVR32 UC3 microcontrollers.
- * \copydetails Group_EndpointStreamRW_UC3
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_EndpointStreamRW
- * \defgroup Group_EndpointStreamRW_UC3 Read/Write of Multi-Byte Streams (UC3)
- * \brief Endpoint data stream transmission and reception management for the Atmel AVR32 UC3 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of data streams from
- * and to endpoints.
- *
- * @{
- */
-
-#ifndef __ENDPOINT_STREAM_UC3_H__
-#define __ENDPOINT_STREAM_UC3_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBMode.h"
- #include "../USBTask.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Function Prototypes: */
- /** \name Stream functions for null data */
- //@{
-
- /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes empty while there is still data to process (and after the current
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number
- * of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Discard_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Discard_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Length Number of bytes to discard via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- /** Writes a given number of zeroed bytes to the currently selected endpoint's bank, sending
- * full packets to the host as needed. The last packet is not automatically sent once the
- * remaining bytes have been written; the user is responsible for manually sending the last
- * packet to the host via the \ref Endpoint_ClearIN() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes full while there is still data to process (and after the current
- * packet transmission has been initiated) the BytesProcessed location will be updated with the
- * total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Null_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Null_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Length Number of zero bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- //@}
-
- /** \name Stream functions for RAM source/destination data */
- //@{
-
- /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
- * sending full packets to the host as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Endpoint_ClearIN() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes full while there is still data to process (and after the current
- * packet transmission has been initiated) the BytesProcessed location will be updated with the
- * total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Stream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the endpoint from the given buffer in big endian,
- * sending full packets to the host as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Endpoint_ClearIN() macro.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Stream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the endpoint from the given buffer in little endian,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes empty while there is still data to process (and after the current
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number
- * of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Stream_LE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the endpoint from the given buffer in big endian,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Stream_BE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
- * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the status OUT packet
- * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_Stream_LE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
- * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the status OUT packet
- * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_Stream_BE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
- * discarding fully read packets from the host as needed. The device IN acknowledgement is not
- * automatically sent after success or failure states; the user is responsible for manually sending the
- * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_Stream_LE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
- * discarding fully read packets from the host as needed. The device IN acknowledgement is not
- * automatically sent after success or failure states; the user is responsible for manually sending the
- * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c deleted file mode 100644 index 235ddde59..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.c +++ /dev/null @@ -1,196 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_UC3)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#include "../Endpoint.h"
-
-#if !defined(FIXED_CONTROL_ENDPOINT_SIZE)
-uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE;
-#endif
-
-volatile uint32_t USB_Endpoint_SelectedEndpoint = ENDPOINT_CONTROLEP;
-volatile uint8_t* USB_Endpoint_FIFOPos[ENDPOINT_TOTAL_ENDPOINTS];
-
-bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table,
- const uint8_t Entries)
-{
- for (uint8_t i = 0; i < Entries; i++)
- {
- if (!(Table[i].Address))
- continue;
-
- if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks)))
- {
- return false;
- }
- }
-
- return true;
-}
-
-bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number,
- const uint32_t UECFG0Data)
-{
- USB_Endpoint_FIFOPos[Number] = &AVR32_USBB_SLAVE[Number * ENDPOINT_HSB_ADDRESS_SPACE_SIZE];
-
-#if defined(CONTROL_ONLY_DEVICE) || defined(ORDERED_EP_CONFIG)
- Endpoint_SelectEndpoint(Number);
- Endpoint_EnableEndpoint();
-
- (&AVR32_USBB.uecfg0)[Number] = 0;
- (&AVR32_USBB.uecfg0)[Number] = UECFG0Data;
-
- return Endpoint_IsConfigured();
-#else
- for (uint8_t EPNum = Number; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++)
- {
- uint32_t UECFG0Temp;
-
- Endpoint_SelectEndpoint(EPNum);
-
- if (EPNum == Number)
- {
- UECFG0Temp = UECFG0Data;
- }
- else
- {
- UECFG0Temp = (&AVR32_USBB.uecfg0)[EPNum];
- }
-
- if (!(UECFG0Temp & AVR32_USBB_ALLOC_MASK))
- continue;
-
- Endpoint_DisableEndpoint();
- (&AVR32_USBB.uecfg0)[EPNum] &= ~AVR32_USBB_ALLOC_MASK;
-
- Endpoint_EnableEndpoint();
- (&AVR32_USBB.uecfg0)[EPNum] = UECFG0Temp;
-
- if (!(Endpoint_IsConfigured()))
- return false;
- }
-
- Endpoint_SelectEndpoint(Number);
- return true;
-#endif
-}
-
-void Endpoint_ClearEndpoints(void)
-{
- for (uint8_t EPNum = 0; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++)
- {
- Endpoint_SelectEndpoint(EPNum);
- (&AVR32_USBB.uecfg0)[EPNum] = 0;
- (&AVR32_USBB.uecon0clr)[EPNum] = -1;
- USB_Endpoint_FIFOPos[EPNum] = &AVR32_USBB_SLAVE[EPNum * 0x10000];
- Endpoint_DisableEndpoint();
- }
-}
-
-void Endpoint_ClearStatusStage(void)
-{
- if (USB_ControlRequest.bmRequestType & REQDIR_DEVICETOHOST)
- {
- while (!(Endpoint_IsOUTReceived()))
- {
- if (USB_DeviceState == DEVICE_STATE_Unattached)
- return;
- }
-
- Endpoint_ClearOUT();
- }
- else
- {
- while (!(Endpoint_IsINReady()))
- {
- if (USB_DeviceState == DEVICE_STATE_Unattached)
- return;
- }
-
- Endpoint_ClearIN();
- }
-}
-
-#if !defined(CONTROL_ONLY_DEVICE)
-uint8_t Endpoint_WaitUntilReady(void)
-{
- #if (USB_STREAM_TIMEOUT_MS < 0xFF)
- uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
- #else
- uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
- #endif
-
- uint16_t PreviousFrameNumber = USB_Device_GetFrameNumber();
-
- for (;;)
- {
- if (Endpoint_GetEndpointDirection() == ENDPOINT_DIR_IN)
- {
- if (Endpoint_IsINReady())
- return ENDPOINT_READYWAIT_NoError;
- }
- else
- {
- if (Endpoint_IsOUTReceived())
- return ENDPOINT_READYWAIT_NoError;
- }
-
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_READYWAIT_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_READYWAIT_BusSuspended;
- else if (Endpoint_IsStalled())
- return ENDPOINT_READYWAIT_EndpointStalled;
-
- uint16_t CurrentFrameNumber = USB_Device_GetFrameNumber();
-
- if (CurrentFrameNumber != PreviousFrameNumber)
- {
- PreviousFrameNumber = CurrentFrameNumber;
-
- if (!(TimeoutMSRem--))
- return ENDPOINT_READYWAIT_Timeout;
- }
- }
-}
-#endif
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h deleted file mode 100644 index 356c9c3cb..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h +++ /dev/null @@ -1,795 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Endpoint definitions for the AVR32 UC3 microcontrollers.
- * \copydetails Group_EndpointManagement_UC3
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_EndpointRW
- * \defgroup Group_EndpointRW_UC3 Endpoint Data Reading and Writing (UC3)
- * \brief Endpoint data read/write definitions for the Atmel AVR32 UC3 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints.
- */
-
-/** \ingroup Group_EndpointPrimitiveRW
- * \defgroup Group_EndpointPrimitiveRW_UC3 Read/Write of Primitive Data Types (UC3)
- * \brief Endpoint primitive read/write definitions for the Atmel AVR32 UC3 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
- * from and to endpoints.
- */
-
-/** \ingroup Group_EndpointPacketManagement
- * \defgroup Group_EndpointPacketManagement_UC3 Endpoint Packet Management (UC3)
- * \brief Endpoint packet management definitions for the Atmel AVR32 UC3 architecture.
- *
- * Functions, macros, variables, enums and types related to packet management of endpoints.
- */
-
-/** \ingroup Group_EndpointManagement
- * \defgroup Group_EndpointManagement_UC3 Endpoint Management (UC3)
- * \brief Endpoint management definitions for the Atmel AVR32 UC3 architecture.
- *
- * Functions, macros and enums related to endpoint management when in USB Device mode. This
- * module contains the endpoint management macros, as well as endpoint interrupt and data
- * send/receive functions for various data types.
- *
- * @{
- */
-
-#ifndef __ENDPOINT_UC3_H__
-#define __ENDPOINT_UC3_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBTask.h"
- #include "../USBInterrupt.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define ENDPOINT_HSB_ADDRESS_SPACE_SIZE (64 * 1024UL)
-
- /* Inline Functions: */
- static inline uint32_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST
- ATTR_ALWAYS_INLINE;
- static inline uint32_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes)
- {
- uint8_t MaskVal = 0;
- uint16_t CheckBytes = 8;
-
- while (CheckBytes < Bytes)
- {
- MaskVal++;
- CheckBytes <<= 1;
- }
-
- return (MaskVal << AVR32_USBB_EPSIZE_OFFSET);
- }
-
- /* Function Prototypes: */
- void Endpoint_ClearEndpoints(void);
- bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number,
- const uint32_t UECFGXData);
-
- /* External Variables: */
- extern volatile uint32_t USB_Endpoint_SelectedEndpoint;
- extern volatile uint8_t* USB_Endpoint_FIFOPos[];
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
- /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size
- * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined.
- */
- #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8
- #endif
-
- #if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__)
- #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32)
- #define ENDPOINT_TOTAL_ENDPOINTS 8
- #else
- /** Total number of endpoints (including the default control endpoint at address 0) which may
- * be used in the device. Different AVR models support different amounts of endpoints,
- * this value reflects the maximum number of endpoints for the currently selected AVR model.
- */
- #define ENDPOINT_TOTAL_ENDPOINTS 7
- #endif
- #else
- #define ENDPOINT_TOTAL_ENDPOINTS 1
- #endif
-
- /* Enums: */
- /** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function.
- *
- * \ingroup Group_EndpointRW_UC3
- */
- enum Endpoint_WaitUntilReady_ErrorCodes_t
- {
- ENDPOINT_READYWAIT_NoError = 0, /**< Endpoint is ready for next packet, no error. */
- ENDPOINT_READYWAIT_EndpointStalled = 1, /**< The endpoint was stalled during the stream
- * transfer by the host or device.
- */
- ENDPOINT_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while
- * waiting for the endpoint to become ready.
- */
- ENDPOINT_READYWAIT_BusSuspended = 3, /**< The USB bus has been suspended by the host and
- * no USB endpoint traffic can occur until the bus
- * has resumed.
- */
- ENDPOINT_READYWAIT_Timeout = 4, /**< The host failed to accept or send the next packet
- * within the software timeout period set by the
- * \ref USB_STREAM_TIMEOUT_MS macro.
- */
- };
-
- /* Inline Functions: */
- /** Configures the specified endpoint address with the given endpoint type, direction, bank size
- * and banking mode. Once configured, the endpoint may be read from or written to, depending
- * on its direction.
- *
- * \param[in] Address Endpoint address to configure.
- *
- * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types
- * are available on Low Speed USB devices - refer to the USB 2.0 specification.
- *
- * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted
- * to the USB host, or after they have been received from the USB host (depending on
- * the endpoint's data direction). The bank size must indicate the maximum packet size
- * that the endpoint can handle.
- *
- * \param[in] Banks Number of hardware banks to use for the endpoint being configured.
- *
- * \attention When the \c ORDERED_EP_CONFIG compile time option is used, Endpoints <b>must</b> be configured in
- * ascending order, or bank corruption will occur.
- *
- * \note Different endpoints may have different maximum packet sizes based on the endpoint's index - refer to
- * the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint.
- * \n\n
- *
- * \note The default control endpoint should not be manually configured by the user application, as
- * it is automatically configured by the library internally.
- * \n\n
- *
- * \note This routine will automatically select the specified endpoint upon success. Upon failure, the endpoint
- * which failed to reconfigure correctly will be selected.
- *
- * \return Boolean \c true if the configuration succeeded, \c false otherwise.
- */
- static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address,
- const uint8_t Type,
- const uint16_t Size,
- const uint8_t Banks) ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address,
- const uint8_t Type,
- const uint16_t Size,
- const uint8_t Banks)
- {
- uint8_t Number = (Address & ENDPOINT_EPNUM_MASK);
-
- if (Number >= ENDPOINT_TOTAL_ENDPOINTS)
- return false;
-
- return Endpoint_ConfigureEndpoint_Prv(Number,
- (AVR32_USBB_ALLOC_MASK |
- ((uint32_t)Type << AVR32_USBB_EPTYPE_OFFSET) |
- ((Address & ENDPOINT_DIR_IN) ? AVR32_USBB_UECFG0_EPDIR_MASK : 0) |
- ((Banks > 1) ? AVR32_USBB_UECFG0_EPBK_SINGLE : AVR32_USBB_UECFG0_EPBK_DOUBLE) |
- Endpoint_BytesToEPSizeMask(Size)));
- }
-
- /** Indicates the number of bytes currently stored in the current endpoint's selected bank.
- *
- * \ingroup Group_EndpointRW_UC3
- *
- * \return Total number of bytes in the currently selected Endpoint's FIFO buffer.
- */
- static inline uint16_t Endpoint_BytesInEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Endpoint_BytesInEndpoint(void)
- {
- return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].byct;
- }
-
- /** Determines the currently selected endpoint's direction.
- *
- * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask.
- */
- static inline uint32_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Endpoint_GetEndpointDirection(void)
- {
- return ((&AVR32_USBB.UECFG0)[USB_Endpoint_SelectedEndpoint].epdir ? ENDPOINT_DIR_IN : ENDPOINT_DIR_OUT);
- }
-
- /** Get the endpoint address of the currently selected endpoint. This is typically used to save
- * the currently selected endpoint so that it can be restored after another endpoint has been
- * manipulated.
- *
- * \return Index of the currently selected endpoint.
- */
- static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_GetCurrentEndpoint(void)
- {
- return (USB_Endpoint_SelectedEndpoint | Endpoint_GetEndpointDirection());
- }
-
- /** Selects the given endpoint address.
- *
- * Any endpoint operations which do not require the endpoint address to be indicated will operate on
- * the currently selected endpoint.
- *
- * \param[in] Address Endpoint address to select.
- */
- static inline void Endpoint_SelectEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_SelectEndpoint(const uint8_t Address)
- {
- USB_Endpoint_SelectedEndpoint = (Address & ENDPOINT_EPNUM_MASK);
- }
-
- /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's
- * data In and Out pointers to the bank's contents.
- *
- * \param[in] Address Endpoint number whose FIFO buffers are to be reset.
- */
- static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ResetEndpoint(const uint8_t Address)
- {
- uint32_t EndpointNumber = (Address & ENDPOINT_EPNUM_MASK);
-
- AVR32_USBB.uerst |= (AVR32_USBB_EPRST0_MASK << EndpointNumber);
- AVR32_USBB.uerst &= ~(AVR32_USBB_EPRST0_MASK << EndpointNumber);
- USB_Endpoint_FIFOPos[EndpointNumber] = &AVR32_USBB_SLAVE[EndpointNumber * ENDPOINT_HSB_ADDRESS_SPACE_SIZE];
- }
-
- /** Enables the currently selected endpoint so that data can be sent and received through it to
- * and from a host.
- *
- * \note Endpoints must first be configured properly via \ref Endpoint_ConfigureEndpoint().
- */
- static inline void Endpoint_EnableEndpoint(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_EnableEndpoint(void)
- {
- AVR32_USBB.uerst |= (AVR32_USBB_EPEN0_MASK << USB_Endpoint_SelectedEndpoint);
- }
-
- /** Disables the currently selected endpoint so that data cannot be sent and received through it
- * to and from a host.
- */
- static inline void Endpoint_DisableEndpoint(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_DisableEndpoint(void)
- {
- AVR32_USBB.uerst &= ~(AVR32_USBB_EPEN0_MASK << USB_Endpoint_SelectedEndpoint);
- }
-
- /** Determines if the currently selected endpoint is enabled, but not necessarily configured.
- *
- * \return Boolean \c true if the currently selected endpoint is enabled, \c false otherwise.
- */
- static inline bool Endpoint_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsEnabled(void)
- {
- return ((AVR32_USBB.uerst & (AVR32_USBB_EPEN0_MASK << USB_Endpoint_SelectedEndpoint)) ? true : false);
- }
-
- /** Retrieves the number of busy banks in the currently selected endpoint, which have been queued for
- * transmission via the \ref Endpoint_ClearIN() command, or are awaiting acknowledgement via the
- * \ref Endpoint_ClearOUT() command.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- *
- * \return Total number of busy banks in the selected endpoint.
- */
- static inline uint8_t Endpoint_GetBusyBanks(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint8_t Endpoint_GetBusyBanks(void)
- {
- return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].nbusybk;
- }
-
- /** Aborts all pending IN transactions on the currently selected endpoint, once the bank
- * has been queued for transmission to the host via \ref Endpoint_ClearIN(). This function
- * will terminate all queued transactions, resetting the endpoint banks ready for a new
- * packet.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- */
- static inline void Endpoint_AbortPendingIN(void)
- {
- while (Endpoint_GetBusyBanks() != 0)
- {
- (&AVR32_USBB.UECON0SET)[USB_Endpoint_SelectedEndpoint].killbks = true;
- while ((&AVR32_USBB.UECON0)[USB_Endpoint_SelectedEndpoint].killbk);
- }
- }
-
- /** Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint
- * bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN
- * direction). This function will return false if an error has occurred in the endpoint, if the endpoint
- * is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN
- * direction and the endpoint bank is full.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- *
- * \return Boolean \c true if the currently selected endpoint may be read from or written to, depending
- * on its direction.
- */
- static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsReadWriteAllowed(void)
- {
- return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].rwall;
- }
-
- /** Determines if the currently selected endpoint is configured.
- *
- * \return Boolean \c true if the currently selected endpoint has been configured, \c false otherwise.
- */
- static inline bool Endpoint_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsConfigured(void)
- {
- return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].cfgok;
- }
-
- /** Returns a mask indicating which INTERRUPT type endpoints have interrupted - i.e. their
- * interrupt duration has elapsed. Which endpoints have interrupted can be determined by
- * masking the return value against <tt>(1 << <i>{Endpoint Number}</i>)</tt>.
- *
- * \return Mask whose bits indicate which endpoints have interrupted.
- */
- static inline uint32_t Endpoint_GetEndpointInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Endpoint_GetEndpointInterrupts(void)
- {
- return ((AVR32_USBB.udint & (AVR32_USBB_EP6INT_MASK | AVR32_USBB_EP5INT_MASK |
- AVR32_USBB_EP4INT_MASK | AVR32_USBB_EP3INT_MASK |
- AVR32_USBB_EP2INT_MASK | AVR32_USBB_EP1INT_MASK |
- AVR32_USBB_EP0INT_MASK)) >> AVR32_USBB_EP0INT_OFFSET);
- }
-
- /** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type
- * endpoints).
- *
- * \param[in] Address Address of the endpoint whose interrupt flag should be tested.
- *
- * \return Boolean \c true if the specified endpoint has interrupted, \c false otherwise.
- */
- static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_HasEndpointInterrupted(const uint8_t Address)
- {
- return ((Endpoint_GetEndpointInterrupts() & (AVR32_USBB_EP0INT_MASK << (Address & ENDPOINT_EPNUM_MASK))) ? true : false);
- }
-
- /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- *
- * \return Boolean \c true if the current endpoint is ready for an IN packet, \c false otherwise.
- */
- static inline bool Endpoint_IsINReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsINReady(void)
- {
- return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].txini;
- }
-
- /** Determines if the selected OUT endpoint has received new packet from the host.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- *
- * \return Boolean \c true if current endpoint is has received an OUT packet, \c false otherwise.
- */
- static inline bool Endpoint_IsOUTReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsOUTReceived(void)
- {
- return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].rxouti;
- }
-
- /** Determines if the current CONTROL type endpoint has received a SETUP packet.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- *
- * \return Boolean \c true if the selected endpoint has received a SETUP packet, \c false otherwise.
- */
- static inline bool Endpoint_IsSETUPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsSETUPReceived(void)
- {
- return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].rxstpi;
- }
-
- /** Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the
- * endpoint for the next packet.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- *
- * \note This is not applicable for non CONTROL type endpoints.
- */
- static inline void Endpoint_ClearSETUP(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearSETUP(void)
- {
- (&AVR32_USBB.UESTA0CLR)[USB_Endpoint_SelectedEndpoint].rxstpic = true;
- USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint] = &AVR32_USBB_SLAVE[USB_Endpoint_SelectedEndpoint * ENDPOINT_HSB_ADDRESS_SPACE_SIZE];
- }
-
- /** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the
- * next packet and switching to the alternative endpoint bank if double banked.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- */
- static inline void Endpoint_ClearIN(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearIN(void)
- {
- (&AVR32_USBB.UESTA0CLR)[USB_Endpoint_SelectedEndpoint].txinic = true;
- (&AVR32_USBB.UECON0CLR)[USB_Endpoint_SelectedEndpoint].fifoconc = true;
- USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint] = &AVR32_USBB_SLAVE[USB_Endpoint_SelectedEndpoint * ENDPOINT_HSB_ADDRESS_SPACE_SIZE];
- }
-
- /** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint
- * for the next packet and switching to the alternative endpoint bank if double banked.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- */
- static inline void Endpoint_ClearOUT(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearOUT(void)
- {
- (&AVR32_USBB.UESTA0CLR)[USB_Endpoint_SelectedEndpoint].rxoutic = true;
- (&AVR32_USBB.UECON0CLR)[USB_Endpoint_SelectedEndpoint].fifoconc = true;
- USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint] = &AVR32_USBB_SLAVE[USB_Endpoint_SelectedEndpoint * ENDPOINT_HSB_ADDRESS_SPACE_SIZE];
- }
-
- /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the
- * indicated endpoint and that the current transfer sequence should be aborted. This provides a
- * way for devices to indicate invalid commands to the host so that the current transfer can be
- * aborted and the host can begin its own recovery sequence.
- *
- * The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro
- * is called, or the host issues a CLEAR FEATURE request to the device for the currently selected
- * endpoint.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- */
- static inline void Endpoint_StallTransaction(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_StallTransaction(void)
- {
- (&AVR32_USBB.UECON0SET)[USB_Endpoint_SelectedEndpoint].stallrqs = true;
- }
-
- /** Clears the STALL condition on the currently selected endpoint.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- */
- static inline void Endpoint_ClearStall(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearStall(void)
- {
- (&AVR32_USBB.UECON0CLR)[USB_Endpoint_SelectedEndpoint].stallrqc = true;
- }
-
- /** Determines if the currently selected endpoint is stalled, false otherwise.
- *
- * \ingroup Group_EndpointPacketManagement_UC3
- *
- * \return Boolean \c true if the currently selected endpoint is stalled, \c false otherwise.
- */
- static inline bool Endpoint_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsStalled(void)
- {
- return (&AVR32_USBB.UECON0)[USB_Endpoint_SelectedEndpoint].stallrq;
- }
-
- /** Resets the data toggle of the currently selected endpoint. */
- static inline void Endpoint_ResetDataToggle(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ResetDataToggle(void)
- {
- (&AVR32_USBB.UECON0SET)[USB_Endpoint_SelectedEndpoint].rstdts = true;
- }
-
- /** Sets the direction of the currently selected endpoint.
- *
- * \param[in] DirectionMask New endpoint direction, as a \c ENDPOINT_DIR_* mask.
- */
- static inline void Endpoint_SetEndpointDirection(const uint32_t DirectionMask) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_SetEndpointDirection(const uint32_t DirectionMask)
- {
- (&AVR32_USBB.UECFG0)[USB_Endpoint_SelectedEndpoint].epdir = (DirectionMask == ENDPOINT_DIR_IN);
- }
-
- /** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- *
- * \return Next byte in the currently selected endpoint's FIFO buffer.
- */
- static inline uint8_t Endpoint_Read_8(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_Read_8(void)
- {
- return *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- }
-
- /** Writes one byte to the currently selected endpoint's bank, for IN direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- *
- * \param[in] Data Data to write into the the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_8(const uint8_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_8(const uint8_t Data)
- {
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = Data;
- }
-
- /** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- */
- static inline void Endpoint_Discard_8(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Discard_8(void)
- {
- uint8_t Dummy;
-
- Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
-
- (void)Dummy;
- }
-
- /** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- *
- * \return Next two bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint16_t Endpoint_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Endpoint_Read_16_LE(void)
- {
- uint16_t Byte0 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- uint16_t Byte1 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
-
- return ((Byte1 << 8) | Byte0);
- }
-
- /** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- *
- * \return Next two bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint16_t Endpoint_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Endpoint_Read_16_BE(void)
- {
- uint16_t Byte0 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- uint16_t Byte1 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
-
- return ((Byte0 << 8) | Byte1);
- }
-
- /** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_16_LE(const uint16_t Data)
- {
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data & 0xFF);
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 8);
- }
-
- /** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_16_BE(const uint16_t Data)
- {
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 8);
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data & 0xFF);
- }
-
- /** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- */
- static inline void Endpoint_Discard_16(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Discard_16(void)
- {
- uint8_t Dummy;
-
- Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
-
- (void)Dummy;
- }
-
- /** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- *
- * \return Next four bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint32_t Endpoint_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Endpoint_Read_32_LE(void)
- {
- uint32_t Byte0 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- uint32_t Byte1 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- uint32_t Byte2 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- uint32_t Byte3 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
-
- return ((Byte3 << 24) | (Byte2 << 16) | (Byte1 << 8) | Byte0);
- }
-
- /** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- *
- * \return Next four bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint32_t Endpoint_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Endpoint_Read_32_BE(void)
- {
- uint32_t Byte0 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- uint32_t Byte1 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- uint32_t Byte2 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- uint32_t Byte3 = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
-
- return ((Byte0 << 24) | (Byte1 << 16) | (Byte2 << 8) | Byte3);
- }
-
- /** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_32_LE(const uint32_t Data)
- {
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data & 0xFF);
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 8);
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 16);
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 24);
- }
-
- /** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_32_BE(const uint32_t Data)
- {
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 24);
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 16);
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data >> 8);
- *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++) = (Data & 0xFF);
- }
-
- /** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_UC3
- */
- static inline void Endpoint_Discard_32(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Discard_32(void)
- {
- uint8_t Dummy;
-
- Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
- Dummy = *(USB_Endpoint_FIFOPos[USB_Endpoint_SelectedEndpoint]++);
-
- (void)Dummy;
- }
-
- /* External Variables: */
- /** Global indicating the maximum packet size of the default control endpoint located at address
- * 0 in the device. This value is set to the value indicated in the device descriptor in the user
- * project once the USB interface is initialized into device mode.
- *
- * If space is an issue, it is possible to fix this to a static value by defining the control
- * endpoint size in the \c FIXED_CONTROL_ENDPOINT_SIZE token passed to the compiler in the makefile
- * via the -D switch. When a fixed control endpoint size is used, the size is no longer dynamically
- * read from the descriptors at runtime and instead fixed to the given value. When used, it is
- * important that the descriptor control endpoint size value matches the size given as the
- * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token
- * be used in the device descriptors to ensure this.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- */
- #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
- extern uint8_t USB_Device_ControlEndpointSize;
- #else
- #define USB_Device_ControlEndpointSize FIXED_CONTROL_ENDPOINT_SIZE
- #endif
-
- /* Function Prototypes: */
- /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple
- * endpoints at the same time.
- *
- * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the
- * control endpoint.
- *
- * \param[in] Table Pointer to a table of endpoint descriptions.
- * \param[in] Entries Number of entries in the endpoint table to configure.
- *
- * \return Boolean \c true if all endpoints configured successfully, \c false otherwise.
- */
- bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table,
- const uint8_t Entries);
-
- /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically,
- * with respect to the data direction. This is a convenience function which can be used to
- * simplify user control request handling.
- *
- * \note This routine should not be called on non CONTROL type endpoints.
- */
- void Endpoint_ClearStatusStage(void);
-
- /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data
- * to be read or written to it.
- *
- * \note This routine should not be called on CONTROL type endpoints.
- *
- * \ingroup Group_EndpointRW_UC3
- *
- * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t Endpoint_WaitUntilReady(void);
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Host_UC3.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Host_UC3.c deleted file mode 100644 index 24e2136e4..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Host_UC3.c +++ /dev/null @@ -1,294 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_UC3)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#define __INCLUDE_FROM_HOST_C
-#include "../Host.h"
-
-void USB_Host_ProcessNextHostState(void)
-{
- uint8_t ErrorCode = HOST_ENUMERROR_NoError;
- uint8_t SubErrorCode = HOST_ENUMERROR_NoError;
-
- static uint16_t WaitMSRemaining;
- static uint8_t PostWaitState;
-
- switch (USB_HostState)
- {
- case HOST_STATE_WaitForDevice:
- if (WaitMSRemaining)
- {
- if ((SubErrorCode = USB_Host_WaitMS(1)) != HOST_WAITERROR_Successful)
- {
- USB_HostState = PostWaitState;
- ErrorCode = HOST_ENUMERROR_WaitStage;
- break;
- }
-
- if (!(--WaitMSRemaining))
- USB_HostState = PostWaitState;
- }
-
- break;
- case HOST_STATE_Powered:
- WaitMSRemaining = HOST_DEVICE_SETTLE_DELAY_MS;
-
- USB_HostState = HOST_STATE_Powered_WaitForDeviceSettle;
- break;
- case HOST_STATE_Powered_WaitForDeviceSettle:
- if (WaitMSRemaining--)
- {
- Delay_MS(1);
- break;
- }
- else
- {
- USB_Host_VBUS_Manual_Off();
-
- USB_OTGPAD_On();
- USB_Host_VBUS_Auto_Enable();
- USB_Host_VBUS_Auto_On();
-
- #if defined(NO_AUTO_VBUS_MANAGEMENT)
- USB_Host_VBUS_Manual_Enable();
- USB_Host_VBUS_Manual_On();
- #endif
-
- USB_HostState = HOST_STATE_Powered_WaitForConnect;
- }
-
- break;
- case HOST_STATE_Powered_WaitForConnect:
- if (USB_INT_HasOccurred(USB_INT_DCONNI))
- {
- USB_INT_Clear(USB_INT_DCONNI);
- USB_INT_Clear(USB_INT_DDISCI);
-
- USB_INT_Clear(USB_INT_VBERRI);
- USB_INT_Enable(USB_INT_VBERRI);
-
- USB_Host_ResumeBus();
- Pipe_ClearPipes();
-
- HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Powered_DoReset);
- }
-
- break;
- case HOST_STATE_Powered_DoReset:
- USB_Host_ResetDevice();
-
- HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Powered_ConfigPipe);
- break;
- case HOST_STATE_Powered_ConfigPipe:
- if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, PIPE_CONTROLPIPE_DEFAULT_SIZE, 1)))
- {
- ErrorCode = HOST_ENUMERROR_PipeConfigError;
- SubErrorCode = 0;
- break;
- }
-
- USB_HostState = HOST_STATE_Default;
- break;
- case HOST_STATE_Default:
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_DEVICETOHOST | REQTYPE_STANDARD | REQREC_DEVICE),
- .bRequest = REQ_GetDescriptor,
- .wValue = (DTYPE_Device << 8),
- .wIndex = 0,
- .wLength = 8,
- };
-
- uint8_t DataBuffer[8];
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
- if ((SubErrorCode = USB_Host_SendControlRequest(DataBuffer)) != HOST_SENDCONTROL_Successful)
- {
- ErrorCode = HOST_ENUMERROR_ControlError;
- break;
- }
-
- USB_Host_ControlPipeSize = DataBuffer[offsetof(USB_Descriptor_Device_t, Endpoint0Size)];
-
- USB_Host_ResetDevice();
-
- HOST_TASK_NONBLOCK_WAIT(200, HOST_STATE_Default_PostReset);
- break;
- case HOST_STATE_Default_PostReset:
- if (!(Pipe_ConfigurePipe(PIPE_CONTROLPIPE, EP_TYPE_CONTROL, ENDPOINT_CONTROLEP, USB_Host_ControlPipeSize, 1)))
- {
- ErrorCode = HOST_ENUMERROR_PipeConfigError;
- SubErrorCode = 0;
- break;
- }
-
- USB_ControlRequest = (USB_Request_Header_t)
- {
- .bmRequestType = (REQDIR_HOSTTODEVICE | REQTYPE_STANDARD | REQREC_DEVICE),
- .bRequest = REQ_SetAddress,
- .wValue = USB_HOST_DEVICEADDRESS,
- .wIndex = 0,
- .wLength = 0,
- };
-
- if ((SubErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
- {
- ErrorCode = HOST_ENUMERROR_ControlError;
- break;
- }
-
- HOST_TASK_NONBLOCK_WAIT(100, HOST_STATE_Default_PostAddressSet);
- break;
- case HOST_STATE_Default_PostAddressSet:
- USB_Host_SetDeviceAddress(USB_HOST_DEVICEADDRESS);
-
- USB_HostState = HOST_STATE_Addressed;
-
- EVENT_USB_Host_DeviceEnumerationComplete();
- break;
- }
-
- if ((ErrorCode != HOST_ENUMERROR_NoError) && (USB_HostState != HOST_STATE_Unattached))
- {
- EVENT_USB_Host_DeviceEnumerationFailed(ErrorCode, SubErrorCode);
-
- USB_Host_VBUS_Auto_Off();
-
- EVENT_USB_Host_DeviceUnattached();
-
- USB_ResetInterface();
- }
-}
-
-uint8_t USB_Host_WaitMS(uint8_t MS)
-{
- bool BusSuspended = USB_Host_IsBusSuspended();
- uint8_t ErrorCode = HOST_WAITERROR_Successful;
- bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
-
- USB_INT_Disable(USB_INT_HSOFI);
- USB_INT_Clear(USB_INT_HSOFI);
-
- USB_Host_ResumeBus();
-
- while (MS)
- {
- if (USB_INT_HasOccurred(USB_INT_HSOFI))
- {
- USB_INT_Clear(USB_INT_HSOFI);
- MS--;
- }
-
- if ((USB_HostState == HOST_STATE_Unattached) || (USB_CurrentMode != USB_MODE_Host))
- {
- ErrorCode = HOST_WAITERROR_DeviceDisconnect;
-
- break;
- }
-
- if (Pipe_IsError())
- {
- Pipe_ClearError();
- ErrorCode = HOST_WAITERROR_PipeError;
-
- break;
- }
-
- if (Pipe_IsStalled())
- {
- Pipe_ClearStall();
- ErrorCode = HOST_WAITERROR_SetupStalled;
-
- break;
- }
- }
-
- if (BusSuspended)
- USB_Host_SuspendBus();
-
- if (HSOFIEnabled)
- USB_INT_Enable(USB_INT_HSOFI);
-
- return ErrorCode;
-}
-
-static void USB_Host_ResetDevice(void)
-{
- bool BusSuspended = USB_Host_IsBusSuspended();
-
- USB_INT_Disable(USB_INT_DDISCI);
-
- USB_Host_ResetBus();
- while (!(USB_Host_IsBusResetComplete()));
- USB_Host_ResumeBus();
-
- USB_Host_ConfigurationNumber = 0;
-
- bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
-
- USB_INT_Disable(USB_INT_HSOFI);
- USB_INT_Clear(USB_INT_HSOFI);
-
- for (uint8_t MSRem = 10; MSRem != 0; MSRem--)
- {
- /* Workaround for powerless-pull-up devices. After a USB bus reset,
- all disconnection interrupts are suppressed while a USB frame is
- looked for - if it is found within 10ms, the device is still
- present. */
-
- if (USB_INT_HasOccurred(USB_INT_HSOFI))
- {
- USB_INT_Clear(USB_INT_HSOFI);
- USB_INT_Clear(USB_INT_DDISCI);
- break;
- }
-
- Delay_MS(1);
- }
-
- if (HSOFIEnabled)
- USB_INT_Enable(USB_INT_HSOFI);
-
- if (BusSuspended)
- USB_Host_SuspendBus();
-
- USB_INT_Enable(USB_INT_DDISCI);
-}
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Host_UC3.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Host_UC3.h deleted file mode 100644 index 07559cd3f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Host_UC3.h +++ /dev/null @@ -1,363 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Host definitions for the AVR32 UC3B microcontrollers.
- * \copydetails Group_Host_UC3B
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_Host
- * \defgroup Group_Host_UC3B Host Management (UC3B)
- * \brief USB Host definitions for the AVR32 UC3B microcontrollers.
- *
- * Architecture specific USB Host definitions for the Atmel 32-bit AVR UC3B microcontrollers.
- *
- * @{
- */
-
-#ifndef __USBHOST_UC3B_H__
-#define __USBHOST_UC3B_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../StdDescriptors.h"
- #include "../Pipe.h"
- #include "../USBInterrupt.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Indicates the fixed USB device address which any attached device is enumerated to when in
- * host mode. As only one USB device may be attached to the AVR in host mode at any one time
- * and that the address used is not important (other than the fact that it is non-zero), a
- * fixed value is specified by the library.
- */
- #define USB_HOST_DEVICEADDRESS 1
-
- #if !defined(HOST_DEVICE_SETTLE_DELAY_MS) || defined(__DOXYGEN__)
- /** Constant for the delay in milliseconds after a device is connected before the library
- * will start the enumeration process. Some devices require a delay of up to 5 seconds
- * after connection before the enumeration process can start or incorrect operation will
- * occur.
- *
- * The default delay value may be overridden in the user project makefile by defining the
- * \c HOST_DEVICE_SETTLE_DELAY_MS token to the required delay in milliseconds, and passed to the
- * compiler using the -D switch.
- */
- #define HOST_DEVICE_SETTLE_DELAY_MS 1000
- #endif
-
- /* Enums: */
- /** Enum for the error codes for the \ref EVENT_USB_Host_HostError() event.
- *
- * \see \ref Group_Events for more information on this event.
- */
- enum USB_Host_ErrorCodes_t
- {
- HOST_ERROR_VBusVoltageDip = 0, /**< VBUS voltage dipped to an unacceptable level. This
- * error may be the result of an attached device drawing
- * too much current from the VBUS line, or due to the
- * AVR's power source being unable to supply sufficient
- * current.
- */
- };
-
- /** Enum for the error codes for the \ref EVENT_USB_Host_DeviceEnumerationFailed() event.
- *
- * \see \ref Group_Events for more information on this event.
- */
- enum USB_Host_EnumerationErrorCodes_t
- {
- HOST_ENUMERROR_NoError = 0, /**< No error occurred. Used internally, this is not a valid
- * ErrorCode parameter value for the \ref EVENT_USB_Host_DeviceEnumerationFailed()
- * event.
- */
- HOST_ENUMERROR_WaitStage = 1, /**< One of the delays between enumeration steps failed
- * to complete successfully, due to a timeout or other
- * error.
- */
- HOST_ENUMERROR_NoDeviceDetected = 2, /**< No device was detected, despite the USB data lines
- * indicating the attachment of a device.
- */
- HOST_ENUMERROR_ControlError = 3, /**< One of the enumeration control requests failed to
- * complete successfully.
- */
- HOST_ENUMERROR_PipeConfigError = 4, /**< The default control pipe (address 0) failed to
- * configure correctly.
- */
- };
-
- /* Inline Functions: */
- /** Returns the current USB frame number, when in host mode. Every millisecond the USB bus is active (i.e. not suspended)
- * the frame number is incremented by one.
- *
- * \return Current USB frame number from the USB controller.
- */
- static inline uint16_t USB_Host_GetFrameNumber(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t USB_Host_GetFrameNumber(void)
- {
- return AVR32_USBB_UHFNUM;
- }
-
- #if !defined(NO_SOF_EVENTS)
- /** Enables the host mode Start Of Frame events. When enabled, this causes the
- * \ref EVENT_USB_Host_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
- * at the start of each USB frame when a device is enumerated while in host mode.
- *
- * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
- */
- static inline void USB_Host_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_EnableSOFEvents(void)
- {
- USB_INT_Enable(USB_INT_HSOFI);
- }
-
- /** Disables the host mode Start Of Frame events. When disabled, this stops the firing of the
- * \ref EVENT_USB_Host_StartOfFrame() event when enumerated in host mode.
- *
- * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
- */
- static inline void USB_Host_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_DisableSOFEvents(void)
- {
- USB_INT_Disable(USB_INT_HSOFI);
- }
- #endif
-
- /** Resets the USB bus, including the endpoints in any attached device and pipes on the AVR host.
- * USB bus resets leave the default control pipe configured (if already configured).
- *
- * If the USB bus has been suspended prior to issuing a bus reset, the attached device will be
- * woken up automatically and the bus resumed after the reset has been correctly issued.
- */
- static inline void USB_Host_ResetBus(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_ResetBus(void)
- {
- AVR32_USBB.UHCON.reset = true;
- }
-
- /** Determines if a previously issued bus reset (via the \ref USB_Host_ResetBus() macro) has
- * completed.
- *
- * \return Boolean \c true if no bus reset is currently being sent, \c false otherwise.
- */
- static inline bool USB_Host_IsBusResetComplete(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_Host_IsBusResetComplete(void)
- {
- return AVR32_USBB.UHCON.reset;
- }
-
- /** Resumes USB communications with an attached and enumerated device, by resuming the transmission
- * of the 1MS Start Of Frame messages to the device. When resumed, USB communications between the
- * host and attached device may occur.
- */
- static inline void USB_Host_ResumeBus(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_ResumeBus(void)
- {
- AVR32_USBB.UHCON.sofe = true;
- }
-
- /** Suspends the USB bus, preventing any communications from occurring between the host and attached
- * device until the bus has been resumed. This stops the transmission of the 1MS Start Of Frame
- * messages to the device.
- *
- * \note While the USB bus is suspended, all USB interrupt sources are also disabled; this means that
- * some events (such as device disconnections) will not fire until the bus is resumed.
- */
- static inline void USB_Host_SuspendBus(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_SuspendBus(void)
- {
- AVR32_USBB.UHCON.sofe = false;
- }
-
- /** Determines if the USB bus has been suspended via the use of the \ref USB_Host_SuspendBus() macro,
- * false otherwise. While suspended, no USB communications can occur until the bus is resumed,
- * except for the Remote Wakeup event from the device if supported.
- *
- * \return Boolean \c true if the bus is currently suspended, \c false otherwise.
- */
- static inline bool USB_Host_IsBusSuspended(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_Host_IsBusSuspended(void)
- {
- return AVR32_USBB.UHCON.sofe;
- }
-
- /** Determines if the attached device is currently enumerated in Full Speed mode (12Mb/s), or
- * false if the attached device is enumerated in Low Speed mode (1.5Mb/s).
- *
- * \return Boolean \c true if the attached device is enumerated in Full Speed mode, \c false otherwise.
- */
- static inline bool USB_Host_IsDeviceFullSpeed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_Host_IsDeviceFullSpeed(void)
- {
- return (AVR32_USBB.USBSTA.speed == AVR32_USBB_SPEED_FULL);
- }
-
- /** Determines if the attached device is currently issuing a Remote Wakeup request, requesting
- * that the host resume the USB bus and wake up the device, false otherwise.
- *
- * \return Boolean \c true if the attached device has sent a Remote Wakeup request, \c false otherwise.
- */
- static inline bool USB_Host_IsRemoteWakeupSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_Host_IsRemoteWakeupSent(void)
- {
- return AVR32_USBB.UHINT.rxrsmi;
- }
-
- /** Clears the flag indicating that a Remote Wakeup request has been issued by an attached device. */
- static inline void USB_Host_ClearRemoteWakeupSent(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_ClearRemoteWakeupSent(void)
- {
- AVR32_USBB.UHINTCLR.rxrsmic = true;
- }
-
- /** Accepts a Remote Wakeup request from an attached device. This must be issued in response to
- * a device's Remote Wakeup request within 2ms for the request to be accepted and the bus to
- * be resumed.
- */
- static inline void USB_Host_ResumeFromWakeupRequest(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_ResumeFromWakeupRequest(void)
- {
- AVR32_USBB.UHCON.resume = true;
- }
-
- /** Determines if a resume from Remote Wakeup request is currently being sent to an attached
- * device.
- *
- * \return Boolean \c true if no resume request is currently being sent, \c false otherwise.
- */
- static inline bool USB_Host_IsResumeFromWakeupRequestSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_Host_IsResumeFromWakeupRequestSent(void)
- {
- return AVR32_USBB.UHCON.resume;
- }
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- static inline void USB_Host_HostMode_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_HostMode_On(void)
- {
- // Not required for UC3B
- }
-
- static inline void USB_Host_HostMode_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_HostMode_Off(void)
- {
- // Not required for UC3B
- }
-
- static inline void USB_Host_VBUS_Auto_Enable(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Auto_Enable(void)
- {
- AVR32_USBB.USBCON.vbushwc = false;
- }
-
- static inline void USB_Host_VBUS_Manual_Enable(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Manual_Enable(void)
- {
- AVR32_USBB.USBCON.vbushwc = true;
- }
-
- static inline void USB_Host_VBUS_Auto_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Auto_On(void)
- {
- AVR32_USBB.USBSTASET.vbusrqs = true;
- }
-
- static inline void USB_Host_VBUS_Manual_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Manual_On(void)
- {
- AVR32_USBB.USBSTASET.vbusrqs = true;
- }
-
- static inline void USB_Host_VBUS_Auto_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Auto_Off(void)
- {
- AVR32_USBB.USBSTACLR.vbusrqc = true;
- }
-
- static inline void USB_Host_VBUS_Manual_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_VBUS_Manual_Off(void)
- {
- AVR32_USBB.USBSTACLR.vbusrqc = true;
- }
-
- static inline void USB_Host_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void USB_Host_SetDeviceAddress(const uint8_t Address)
- {
- AVR32_USBB.UHADDR1.uhaddr_p0 = Address;
- AVR32_USBB.UHADDR1.uhaddr_p1 = Address;
- AVR32_USBB.UHADDR1.uhaddr_p2 = Address;
- AVR32_USBB.UHADDR1.uhaddr_p3 = Address;
- AVR32_USBB.UHADDR2.uhaddr_p4 = Address;
- AVR32_USBB.UHADDR2.uhaddr_p5 = Address;
- AVR32_USBB.UHADDR2.uhaddr_p6 = Address;
- }
-
- /* Enums: */
- enum USB_Host_WaitMSErrorCodes_t
- {
- HOST_WAITERROR_Successful = 0,
- HOST_WAITERROR_DeviceDisconnect = 1,
- HOST_WAITERROR_PipeError = 2,
- HOST_WAITERROR_SetupStalled = 3,
- };
-
- /* Function Prototypes: */
- void USB_Host_ProcessNextHostState(void);
- uint8_t USB_Host_WaitMS(uint8_t MS);
-
- #if defined(__INCLUDE_FROM_HOST_C)
- static void USB_Host_ResetDevice(void);
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.c deleted file mode 100644 index 20c8bf1e6..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.c +++ /dev/null @@ -1,166 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_UC3)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#include "PipeStream_UC3.h"
-
-uint8_t Pipe_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t ErrorCode;
- uint16_t BytesInTransfer = 0;
-
- Pipe_SetPipeToken(PIPE_TOKEN_IN);
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- Length -= *BytesProcessed;
-
- while (Length)
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearIN();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return PIPE_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Pipe_Discard_8();
-
- Length--;
- BytesInTransfer++;
- }
- }
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t Pipe_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t ErrorCode;
- uint16_t BytesInTransfer = 0;
-
- Pipe_SetPipeToken(PIPE_TOKEN_OUT);
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- Length -= *BytesProcessed;
-
- while (Length)
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearOUT();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return PIPE_RWSTREAM_IncompleteTransfer;
- }
-
- USB_USBTask();
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Pipe_Write_8(0);
-
- Length--;
- BytesInTransfer++;
- }
- }
-
- return PIPE_RWSTREAM_NoError;
-}
-
-/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations,
- * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */
-
-#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr)
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_OUT
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_8(*BufferPtr)
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_IN
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8()
-#include "Template/Template_Pipe_RW.c"
-
-#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_TOKEN PIPE_TOKEN_IN
-#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) DataStream -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Pipe_Read_8()
-#include "Template/Template_Pipe_RW.c"
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h deleted file mode 100644 index 34c82ad29..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/PipeStream_UC3.h +++ /dev/null @@ -1,352 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Pipe data stream transmission and reception management for the AVR32 UC3 microcontrollers.
- * \copydetails Group_PipeStreamRW_UC3
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_PipeStreamRW
- * \defgroup Group_PipeStreamRW_UC3 Read/Write of Multi-Byte Streams (UC3)
- * \brief Pipe data stream transmission and reception management for the Atmel AVR32 UC3 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of data streams from
- * and to pipes.
- *
- * @{
- */
-
-#ifndef __PIPE_STREAM_UC3_H__
-#define __PIPE_STREAM_UC3_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBMode.h"
- #include "../USBTask.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Function Prototypes: */
- /** \name Stream functions for null data */
- //@{
-
- /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
- * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the
- * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or
- * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer
- * will instead be performed as a series of chunks. Each time the pipe bank becomes empty while there is still data
- * to process (and after the current packet has been acknowledged) the BytesProcessed location will be updated with
- * the total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to
- * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed
- * value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Pipe_Discard_Stream(512, NULL)) != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Pipe_Discard_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[in] Length Number of bytes to discard via the currently selected pipe.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be processed at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- /** Writes a given number of zeroed bytes to the pipe, sending full pipe packets from the host to the device
- * as needed. The last packet is not automatically sent once the remaining bytes has been written; the
- * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearOUT() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once, failing or
- * succeeding as a single unit. If the BytesProcessed parameter points to a valid storage location, the transfer
- * will instead be performed as a series of chunks. Each time the pipe bank becomes full while there is still data
- * to process (and after the current packet transmission has been initiated) the BytesProcessed location will be
- * updated with the total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed in the user code - to
- * continue the transfer, call the function again with identical parameters and it will resume until the BytesProcessed
- * value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Pipe_Null_Stream(512, NULL)) != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Pipe_Null_Stream(512, &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[in] Length Number of zero bytes to write via the currently selected pipe.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be processed at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- //@}
-
- /** \name Stream functions for RAM source/destination data */
- //@{
-
- /** Writes the given number of bytes to the pipe from the given buffer in little endian,
- * sending full packets to the device as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the pipe bank becomes full while there is still data to process (and after the current
- * packet transmission has been initiated) the BytesProcessed location will be updated with the
- * total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Pipe_Write_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Write_Stream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the pipe from the given buffer in big endian,
- * sending full packets to the device as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Write_Stream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the pipe into the given buffer in little endian,
- * sending full packets to the device as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the pipe bank becomes empty while there is still data to process (and after the current
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number
- * of bytes processed in the stream, and the function will exit with an error code of
- * \ref PIPE_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Pipe_Read_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == PIPE_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != PIPE_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[out] Buffer Pointer to the source data buffer to write to.
- * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Read_Stream_LE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the pipe into the given buffer in big endian,
- * sending full packets to the device as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is
- * executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.
- *
- * \note The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
- *
- * \param[out] Buffer Pointer to the source data buffer to write to.
- * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes already processed should
- * updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Pipe_Read_Stream_BE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c deleted file mode 100644 index 6128869b0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.c +++ /dev/null @@ -1,209 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_UC3)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#include "../Pipe.h"
-
-uint8_t USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
-
-volatile uint32_t USB_Pipe_SelectedPipe = PIPE_CONTROLPIPE;
-volatile uint8_t* USB_Pipe_FIFOPos[PIPE_TOTAL_PIPES];
-
-bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table,
- const uint8_t Entries)
-{
- for (uint8_t i = 0; i < Entries; i++)
- {
- if (!(Table[i].Address))
- continue;
-
- if (!(Pipe_ConfigurePipe(Table[i].Address, Table[i].Type, Table[i].EndpointAddress, Table[i].Size, Table[i].Banks)))
- {
- return false;
- }
- }
-
- return true;
-}
-
-bool Pipe_ConfigurePipe(const uint8_t Address,
- const uint8_t Type,
- const uint8_t EndpointAddress,
- const uint16_t Size,
- const uint8_t Banks)
-{
- uint8_t Number = (Address & PIPE_EPNUM_MASK);
- uint8_t Token = (Address & PIPE_DIR_IN) ? PIPE_TOKEN_IN : PIPE_TOKEN_OUT;
-
- if (Number >= PIPE_TOTAL_PIPES)
- return false;
-
- if (Type == EP_TYPE_CONTROL)
- Token = PIPE_TOKEN_SETUP;
-
- USB_Pipe_FIFOPos[Number] = &AVR32_USBB_SLAVE[Number * PIPE_HSB_ADDRESS_SPACE_SIZE];
-
-#if defined(ORDERED_EP_CONFIG)
- Pipe_SelectPipe(Number);
- Pipe_EnablePipe();
-
- (&AVR32_USBB.upcfg0)[Number] = 0;
- (&AVR32_USBB.upcfg0)[Number] = (AVR32_USBB_ALLOC_MASK |
- ((uint32_t)Type << AVR32_USBB_PTYPE_OFFSET) |
- ((uint32_t)Token << AVR32_USBB_PTOKEN_OFFSET) |
- ((Banks > 1) ? AVR32_USBB_PBK_MASK : 0) |
- Pipe_BytesToEPSizeMask(Size) |
- ((uint32_t)Number << AVR32_USBB_PEPNUM_OFFSET));
-
- Pipe_SetInfiniteINRequests();
-
- return Pipe_IsConfigured();
-#else
- for (uint8_t PNum = Number; PNum < PIPE_TOTAL_PIPES; PNum++)
- {
- uint32_t UPCFG0Temp;
-
- Pipe_SelectPipe(PNum);
-
- if (PNum == Number)
- {
- UPCFG0Temp = (AVR32_USBB_ALLOC_MASK |
- ((uint32_t)Type << AVR32_USBB_PTYPE_OFFSET) |
- ((uint32_t)Token << AVR32_USBB_PTOKEN_OFFSET) |
- ((Banks > 1) ? AVR32_USBB_PBK_MASK : 0) |
- Pipe_BytesToEPSizeMask(Size) |
- ((EndpointAddress & PIPE_EPNUM_MASK) << AVR32_USBB_PEPNUM_OFFSET));
- }
- else
- {
- UPCFG0Temp = (&AVR32_USBB.upcfg0)[PNum];
- }
-
- if (!(UPCFG0Temp & AVR32_USBB_ALLOC_MASK))
- continue;
-
- Pipe_DisablePipe();
- (&AVR32_USBB.upcfg0)[PNum] &= ~AVR32_USBB_ALLOC_MASK;
-
- Pipe_EnablePipe();
- (&AVR32_USBB.upcfg0)[PNum] = UPCFG0Temp;
-
- Pipe_SetInfiniteINRequests();
-
- if (!(Pipe_IsConfigured()))
- return false;
- }
-
- Pipe_SelectPipe(Number);
- return true;
-#endif
-}
-
-void Pipe_ClearPipes(void)
-{
- for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++)
- {
- Pipe_SelectPipe(PNum);
- (&AVR32_USBB.upcfg0)[PNum] = 0;
- (&AVR32_USBB.upcon0clr)[PNum] = -1;
- USB_Pipe_FIFOPos[PNum] = &AVR32_USBB_SLAVE[PNum * 0x10000];
- Pipe_DisablePipe();
- }
-}
-
-bool Pipe_IsEndpointBound(const uint8_t EndpointAddress)
-{
- uint8_t PrevPipeNumber = Pipe_GetCurrentPipe();
-
- for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++)
- {
- Pipe_SelectPipe(PNum);
-
- if (!(Pipe_IsConfigured()))
- continue;
-
- if (Pipe_GetBoundEndpointAddress() == EndpointAddress)
- return true;
- }
-
- Pipe_SelectPipe(PrevPipeNumber);
- return false;
-}
-
-uint8_t Pipe_WaitUntilReady(void)
-{
- #if (USB_STREAM_TIMEOUT_MS < 0xFF)
- uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
- #else
- uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
- #endif
-
- uint16_t PreviousFrameNumber = USB_Host_GetFrameNumber();
-
- for (;;)
- {
- if (Pipe_GetPipeToken() == PIPE_TOKEN_IN)
- {
- if (Pipe_IsINReceived())
- return PIPE_READYWAIT_NoError;
- }
- else
- {
- if (Pipe_IsOUTReady())
- return PIPE_READYWAIT_NoError;
- }
-
- if (Pipe_IsStalled())
- return PIPE_READYWAIT_PipeStalled;
- else if (USB_HostState == HOST_STATE_Unattached)
- return PIPE_READYWAIT_DeviceDisconnected;
-
- uint16_t CurrentFrameNumber = USB_Host_GetFrameNumber();
-
- if (CurrentFrameNumber != PreviousFrameNumber)
- {
- PreviousFrameNumber = CurrentFrameNumber;
-
- if (!(TimeoutMSRem--))
- return PIPE_READYWAIT_Timeout;
- }
- }
-}
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h deleted file mode 100644 index 6de574e9c..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h +++ /dev/null @@ -1,924 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Pipe definitions for the AVR32 UC3 microcontrollers.
- * \copydetails Group_PipeManagement_UC3
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_PipeRW
- * \defgroup Group_PipeRW_UC3 Pipe Data Reading and Writing (UC3)
- * \brief Pipe data read/write definitions for the Atmel AVR32 UC3 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing from and to pipes.
- */
-
-/** \ingroup Group_PipePrimitiveRW
- * \defgroup Group_PipePrimitiveRW_UC3 Read/Write of Primitive Data Types (UC3)
- * \brief Pipe primitive data read/write definitions for the Atmel AVR32 UC3 architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
- * from and to pipes.
- */
-
-/** \ingroup Group_PipePacketManagement
- * \defgroup Group_PipePacketManagement_UC3 Pipe Packet Management (UC3)
- * \brief Pipe packet management definitions for the Atmel AVR32 UC3 architecture.
- *
- * Functions, macros, variables, enums and types related to packet management of pipes.
- */
-
-/** \ingroup Group_PipeControlReq
- * \defgroup Group_PipeControlReq_UC3 Pipe Control Request Management (UC3)
- * \brief Pipe control request management definitions for the Atmel AVR32 UC3 architecture.
- *
- * Module for host mode request processing. This module allows for the transmission of standard, class and
- * vendor control requests to the default control endpoint of an attached device while in host mode.
- *
- * \see Chapter 9 of the USB 2.0 specification.
- */
-
-/** \ingroup Group_PipeManagement
- * \defgroup Group_PipeManagement_UC3 Pipe Management (UC3)
- * \brief Pipe management definitions for the Atmel AVR32 UC3 architecture.
- *
- * This module contains functions, macros and enums related to pipe management when in USB Host mode. This
- * module contains the pipe management macros, as well as pipe interrupt and data send/receive functions
- * for various data types.
- *
- * @{
- */
-
-#ifndef __PIPE_UC3_H__
-#define __PIPE_UC3_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBTask.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #define PIPE_HSB_ADDRESS_SPACE_SIZE (64 * 1024UL)
-
- /* External Variables: */
- extern volatile uint32_t USB_Pipe_SelectedPipe;
- extern volatile uint8_t* USB_Pipe_FIFOPos[];
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name Pipe Error Flag Masks */
- //@{
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that an overflow error occurred in the pipe on the received data. */
- #define PIPE_ERRORFLAG_OVERFLOW (AVR32_USBB_UPSTA0_OVERFI_MASK << 8)
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that a CRC error occurred in the pipe on the received data. */
- #define PIPE_ERRORFLAG_CRC16 AVR32_USBB_UPERR0_CRC16_MASK
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware timeout error occurred in the pipe. */
- #define PIPE_ERRORFLAG_TIMEOUT AVR32_USBB_UPERR0_TIMEOUT_MASK
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware PID error occurred in the pipe. */
- #define PIPE_ERRORFLAG_PID AVR32_USBB_UPERR0_PID_MASK
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data PID error occurred in the pipe. */
- #define PIPE_ERRORFLAG_DATAPID AVR32_USBB_UPERR0_DATAPID_MASK
-
- /** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */
- #define PIPE_ERRORFLAG_DATATGL AVR32_USBB_UPERR0_DATATGL_MASK
- //@}
-
- /** \name Pipe Token Masks */
- //@{
- /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes),
- * which will trigger a control request on the attached device when data is written to the pipe.
- */
- #define PIPE_TOKEN_SETUP AVR32_USBB_UPCFG0_PTOKEN_SETUP
-
- /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a IN token (for non-CONTROL type pipes),
- * indicating that the pipe data will flow from device to host.
- */
- #define PIPE_TOKEN_IN AVR32_USBB_UPCFG0_PTOKEN_IN
-
- /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a OUT token (for non-CONTROL type pipes),
- * indicating that the pipe data will flow from host to device.
- */
- #define PIPE_TOKEN_OUT AVR32_USBB_UPCFG0_PTOKEN_OUT
- //@}
-
- /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value
- * in the device descriptor of the attached device.
- */
- #define PIPE_CONTROLPIPE_DEFAULT_SIZE 64
-
- #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || defined(__DOXYGEN__)
- /** Total number of pipes (including the default control pipe at address 0) which may be used in
- * the device.
- */
- #define PIPE_TOTAL_PIPES 8
- #else
- #define PIPE_TOTAL_PIPES 7
- #endif
-
- /** Size in bytes of the largest pipe bank size possible in the device. Not all banks on each AVR
- * model supports the largest bank size possible on the device; different pipe numbers support
- * different maximum bank sizes. This value reflects the largest possible bank of any pipe on the
- * currently selected UC3 AVR model.
- */
- #define PIPE_MAX_SIZE 256
-
- /* Enums: */
- /** Enum for the possible error return codes of the \ref Pipe_WaitUntilReady() function.
- *
- * \ingroup Group_PipeRW_UC3
- */
- enum Pipe_WaitUntilReady_ErrorCodes_t
- {
- PIPE_READYWAIT_NoError = 0, /**< Pipe ready for next packet, no error. */
- PIPE_READYWAIT_PipeStalled = 1, /**< The device stalled the pipe while waiting. */
- PIPE_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while waiting. */
- PIPE_READYWAIT_Timeout = 3, /**< The device failed to accept or send the next packet
- * within the software timeout period set by the
- * \ref USB_STREAM_TIMEOUT_MS macro.
- */
- };
-
- /* Inline Functions: */
- /** Indicates the number of bytes currently stored in the current pipes's selected bank.
- *
- * \ingroup Group_PipeRW_UC3
- *
- * \return Total number of bytes in the currently selected pipe's FIFO buffer.
- */
- static inline uint16_t Pipe_BytesInPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Pipe_BytesInPipe(void)
- {
- return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].pbyct;
- }
-
- /** Determines the currently selected pipe's direction.
- *
- * \return The currently selected pipe's direction, as a \c PIPE_DIR_* mask.
- */
- static inline uint8_t Pipe_GetPipeDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetPipeDirection(void)
- {
- return (((&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].ptoken == PIPE_TOKEN_OUT) ? PIPE_DIR_OUT : PIPE_DIR_IN);
- }
-
- /** Returns the pipe address of the currently selected pipe. This is typically used to save the
- * currently selected pipe number so that it can be restored after another pipe has been manipulated.
- *
- * \return Index of the currently selected pipe.
- */
- static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetCurrentPipe(void)
- {
- return (USB_Pipe_SelectedPipe | Pipe_GetPipeDirection());
- }
-
- /** Selects the given pipe address. Any pipe operations which do not require the pipe address to be
- * indicated will operate on the currently selected pipe.
- *
- * \param[in] Address Address of the pipe to select.
- */
- static inline void Pipe_SelectPipe(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void Pipe_SelectPipe(const uint8_t Address)
- {
- USB_Pipe_SelectedPipe = (Address & PIPE_EPNUM_MASK);
- }
-
- /** Resets the desired pipe, including the pipe banks and flags.
- *
- * \param[in] Address Index of the pipe to reset.
- */
- static inline void Pipe_ResetPipe(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ResetPipe(const uint8_t Address)
- {
- uint32_t PipeNumber = (Address & PIPE_EPNUM_MASK);
-
- AVR32_USBB.uprst |= (AVR32_USBB_PRST0_MASK << PipeNumber);
- AVR32_USBB.uprst &= ~(AVR32_USBB_PRST0_MASK << PipeNumber);
- USB_Pipe_FIFOPos[PipeNumber] = &AVR32_USBB_SLAVE[PipeNumber * PIPE_HSB_ADDRESS_SPACE_SIZE];
- }
-
- /** Enables the currently selected pipe so that data can be sent and received through it to and from
- * an attached device.
- *
- * \pre The currently selected pipe must first be configured properly via \ref Pipe_ConfigurePipe().
- */
- static inline void Pipe_EnablePipe(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_EnablePipe(void)
- {
- AVR32_USBB.uprst |= (AVR32_USBB_PEN0_MASK << USB_Pipe_SelectedPipe);
- }
-
- /** Disables the currently selected pipe so that data cannot be sent and received through it to and
- * from an attached device.
- */
- static inline void Pipe_DisablePipe(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_DisablePipe(void)
- {
- AVR32_USBB.uprst &= ~(AVR32_USBB_PEN0_MASK << USB_Pipe_SelectedPipe);
- }
-
- /** Determines if the currently selected pipe is enabled, but not necessarily configured.
- *
- * \return Boolean \c true if the currently selected pipe is enabled, \c false otherwise.
- */
- static inline bool Pipe_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsEnabled(void)
- {
- return ((AVR32_USBB.uprst & (AVR32_USBB_PEN0_MASK << USB_Pipe_SelectedPipe)) ? true : false);
- }
-
- /** Gets the current pipe token, indicating the pipe's data direction and type.
- *
- * \return The current pipe token, as a \c PIPE_TOKEN_* mask.
- */
- static inline uint8_t Pipe_GetPipeToken(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetPipeToken(void)
- {
- return (&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].ptoken;
- }
-
- /** Sets the token for the currently selected pipe to one of the tokens specified by the \c PIPE_TOKEN_*
- * masks. This can be used on CONTROL type pipes, to allow for bidirectional transfer of data during
- * control requests, or on regular pipes to allow for half-duplex bidirectional data transfer to devices
- * which have two endpoints of opposite direction sharing the same endpoint address within the device.
- *
- * \param[in] Token New pipe token to set the selected pipe to, as a \c PIPE_TOKEN_* mask.
- */
- static inline void Pipe_SetPipeToken(const uint8_t Token) ATTR_ALWAYS_INLINE;
- static inline void Pipe_SetPipeToken(const uint8_t Token)
- {
- (&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].ptoken = Token;
- }
-
- /** Configures the currently selected pipe to allow for an unlimited number of IN requests. */
- static inline void Pipe_SetInfiniteINRequests(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_SetInfiniteINRequests(void)
- {
- (&AVR32_USBB.UPINRQ0)[USB_Pipe_SelectedPipe].inmode = true;
- }
-
- /** Configures the currently selected pipe to only allow the specified number of IN requests to be
- * accepted by the pipe before it is automatically frozen.
- *
- * \param[in] TotalINRequests Total number of IN requests that the pipe may receive before freezing.
- */
- static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests) ATTR_ALWAYS_INLINE;
- static inline void Pipe_SetFiniteINRequests(const uint8_t TotalINRequests)
- {
- (&AVR32_USBB.UPINRQ0)[USB_Pipe_SelectedPipe].inmode = false;
- (&AVR32_USBB.UPINRQ0)[USB_Pipe_SelectedPipe].inrq = TotalINRequests;
- }
-
- /** Determines if the currently selected pipe is configured.
- *
- * \return Boolean \c true if the selected pipe is configured, \c false otherwise.
- */
- static inline bool Pipe_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsConfigured(void)
- {
- return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].cfgok;
- }
-
- /** Retrieves the endpoint address of the endpoint within the attached device that the currently selected
- * pipe is bound to.
- *
- * \return Endpoint address the currently selected pipe is bound to.
- */
- static inline uint8_t Pipe_GetBoundEndpointAddress(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetBoundEndpointAddress(void)
- {
- return ((&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].pepnum |
- ((Pipe_GetPipeToken() == PIPE_TOKEN_IN) ? PIPE_DIR_IN : PIPE_DIR_OUT));
- }
-
- /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds.
- *
- * \param[in] Milliseconds Number of milliseconds between each pipe poll.
- */
- static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds) ATTR_ALWAYS_INLINE;
- static inline void Pipe_SetInterruptPeriod(const uint8_t Milliseconds)
- {
- (&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].intfrq = Milliseconds;
- }
-
- /** Returns a mask indicating which pipe's interrupt periods have elapsed, indicating that the pipe should
- * be serviced.
- *
- * \return Mask whose bits indicate which pipes have interrupted.
- */
- static inline uint8_t Pipe_GetPipeInterrupts(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetPipeInterrupts(void)
- {
- return ((AVR32_USBB.uhint & (AVR32_USBB_P6INT_MASK | AVR32_USBB_P5INT_MASK |
- AVR32_USBB_P4INT_MASK | AVR32_USBB_P3INT_MASK |
- AVR32_USBB_P2INT_MASK | AVR32_USBB_P1INT_MASK |
- AVR32_USBB_P0INT_MASK)) >> AVR32_USBB_P0INT_OFFSET);
- }
-
- /** Determines if the specified pipe address has interrupted (valid only for INTERRUPT type
- * pipes).
- *
- * \param[in] Address Address of the pipe whose interrupt flag should be tested.
- *
- * \return Boolean \c true if the specified pipe has interrupted, \c false otherwise.
- */
- static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_HasPipeInterrupted(const uint8_t Address)
- {
- return ((AVR32_USBB.uhint & (AVR32_USBB_P0INTES_MASK << (Address & PIPE_EPNUM_MASK))) ? true : false);
- }
-
- /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */
- static inline void Pipe_Unfreeze(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Unfreeze(void)
- {
- (&AVR32_USBB.UPCON0CLR)[USB_Pipe_SelectedPipe].pfreezec = true;
- }
-
- /** Freezes the selected pipe, preventing it from communicating with an attached device. */
- static inline void Pipe_Freeze(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Freeze(void)
- {
- (&AVR32_USBB.UPCON0SET)[USB_Pipe_SelectedPipe].pfreezes = true;
- }
-
- /** Determines if the currently selected pipe is frozen, and not able to accept data.
- *
- * \return Boolean \c true if the currently selected pipe is frozen, \c false otherwise.
- */
- static inline bool Pipe_IsFrozen(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsFrozen(void)
- {
- return (((&AVR32_USBB.UPCON0)[USB_Pipe_SelectedPipe].pfreeze) ? true : false);
- }
-
- /** Clears the error flags for the currently selected pipe. */
- static inline void Pipe_ClearError(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearError(void)
- {
- (&AVR32_USBB.uperr0)[USB_Pipe_SelectedPipe] = 0;
- (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].overfic = true;
- }
-
- /** Determines if the master pipe error flag is set for the currently selected pipe, indicating that
- * some sort of hardware error has occurred on the pipe.
- *
- * \see \ref Pipe_GetErrorFlags() macro for information on retrieving the exact error flag.
- *
- * \return Boolean \c true if an error has occurred on the selected pipe, \c false otherwise.
- */
- static inline bool Pipe_IsError(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsError(void)
- {
- return (((&AVR32_USBB.upsta0)[USB_Pipe_SelectedPipe] &
- (AVR32_USBB_PERRI_MASK | AVR32_USBB_OVERFI_MASK)) ? true : false);
- }
-
- /** Gets a mask of the hardware error flags which have occurred on the currently selected pipe. This
- * value can then be masked against the \c PIPE_ERRORFLAG_* masks to determine what error has occurred.
- *
- * \return Mask comprising of \c PIPE_ERRORFLAG_* bits indicating what error has occurred on the selected pipe.
- */
- static inline uint8_t Pipe_GetErrorFlags(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetErrorFlags(void)
- {
-
- return (((&AVR32_USBB.uperr0)[USB_Pipe_SelectedPipe] &
- (PIPE_ERRORFLAG_CRC16 | PIPE_ERRORFLAG_TIMEOUT |
- PIPE_ERRORFLAG_PID | PIPE_ERRORFLAG_DATAPID |
- PIPE_ERRORFLAG_DATATGL)) |
- (((&AVR32_USBB.upsta0)[USB_Pipe_SelectedPipe] << 8) &
- PIPE_ERRORFLAG_OVERFLOW));
- }
-
- /** Retrieves the number of busy banks in the currently selected pipe, which have been queued for
- * transmission via the \ref Pipe_ClearOUT() command, or are awaiting acknowledgement via the
- * \ref Pipe_ClearIN() command.
- *
- * \ingroup Group_PipePacketManagement_UC3
- *
- * \return Total number of busy banks in the selected pipe.
- */
- static inline uint8_t Pipe_GetBusyBanks(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_GetBusyBanks(void)
- {
- return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].nbusybk;
- }
-
- /** Determines if the currently selected pipe may be read from (if data is waiting in the pipe
- * bank and the pipe is an IN direction, or if the bank is not yet full if the pipe is an OUT
- * direction). This function will return false if an error has occurred in the pipe, or if the pipe
- * is an IN direction and no packet (or an empty packet) has been received, or if the pipe is an OUT
- * direction and the pipe bank is full.
- *
- * \note This function is not valid on CONTROL type pipes.
- *
- * \ingroup Group_PipePacketManagement_UC3
- *
- * \return Boolean \c true if the currently selected pipe may be read from or written to, depending
- * on its direction.
- */
- static inline bool Pipe_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsReadWriteAllowed(void)
- {
- return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].rwall;
- }
-
- /** Determines if a packet has been received on the currently selected IN pipe from the attached device.
- *
- * \ingroup Group_PipePacketManagement_UC3
- *
- * \return Boolean \c true if the current pipe has received an IN packet, \c false otherwise.
- */
- static inline bool Pipe_IsINReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsINReceived(void)
- {
- return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].rxini;
- }
-
- /** Determines if the currently selected OUT pipe is ready to send an OUT packet to the attached device.
- *
- * \ingroup Group_PipePacketManagement_UC3
- *
- * \return Boolean \c true if the current pipe is ready for an OUT packet, \c false otherwise.
- */
- static inline bool Pipe_IsOUTReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsOUTReady(void)
- {
- return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].txouti;
- }
-
- /** Determines if no SETUP request is currently being sent to the attached device on the selected
- * CONTROL type pipe.
- *
- * \ingroup Group_PipePacketManagement_UC3
- *
- * \return Boolean \c true if the current pipe is ready for a SETUP packet, \c false otherwise.
- */
- static inline bool Pipe_IsSETUPSent(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsSETUPSent(void)
- {
- return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].txstpi;
- }
-
- /** Sends the currently selected CONTROL type pipe's contents to the device as a SETUP packet.
- *
- * \ingroup Group_PipePacketManagement_UC3
- */
- static inline void Pipe_ClearSETUP(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearSETUP(void)
- {
- (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].txstpic = true;
- (&AVR32_USBB.UPCON0CLR)[USB_Pipe_SelectedPipe].fifoconc = true;
- USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE];
- }
-
- /** Acknowledges the reception of a setup IN request from the attached device on the currently selected
- * pipe, freeing the bank ready for the next packet.
- *
- * \ingroup Group_PipePacketManagement_UC3
- */
- static inline void Pipe_ClearIN(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearIN(void)
- {
- (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].rxinic = true;
- (&AVR32_USBB.UPCON0CLR)[USB_Pipe_SelectedPipe].fifoconc = true;
- USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE];
- }
-
- /** Sends the currently selected pipe's contents to the device as an OUT packet on the selected pipe, freeing
- * the bank ready for the next packet.
- *
- * \ingroup Group_PipePacketManagement_UC3
- */
- static inline void Pipe_ClearOUT(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearOUT(void)
- {
- (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].txoutic = true;
- (&AVR32_USBB.UPCON0CLR)[USB_Pipe_SelectedPipe].fifoconc = true;
- USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE];
- }
-
- /** Determines if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on
- * the currently selected pipe. This occurs when the host sends a packet to the device, but the device
- * is not currently ready to handle the packet (i.e. its endpoint banks are full). Once a NAK has been
- * received, it must be cleared using \ref Pipe_ClearNAKReceived() before the previous (or any other) packet
- * can be re-sent.
- *
- * \ingroup Group_PipePacketManagement_UC3
- *
- * \return Boolean \c true if an NAK has been received on the current pipe, \c false otherwise.
- */
- static inline bool Pipe_IsNAKReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsNAKReceived(void)
- {
- return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].nakedi;
- }
-
- /** Clears the NAK condition on the currently selected pipe.
- *
- * \ingroup Group_PipePacketManagement_UC3
- *
- * \see \ref Pipe_IsNAKReceived() for more details.
- */
- static inline void Pipe_ClearNAKReceived(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearNAKReceived(void)
- {
- (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].nakedic = true;
- }
-
- /** Determines if the currently selected pipe has had the STALL condition set by the attached device.
- *
- * \ingroup Group_PipePacketManagement_UC3
- *
- * \return Boolean \c true if the current pipe has been stalled by the attached device, \c false otherwise.
- */
- static inline bool Pipe_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Pipe_IsStalled(void)
- {
- return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].rxstalldi;
- }
-
- /** Clears the STALL condition detection flag on the currently selected pipe, but does not clear the
- * STALL condition itself (this must be done via a ClearFeature control request to the device).
- *
- * \ingroup Group_PipePacketManagement_UC3
- */
- static inline void Pipe_ClearStall(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_ClearStall(void)
- {
- (&AVR32_USBB.UPSTA0CLR)[USB_Pipe_SelectedPipe].rxstalldic = true;
- USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE];
- }
-
- /** Reads one byte from the currently selected pipe's bank, for OUT direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- *
- * \return Next byte in the currently selected pipe's FIFO buffer.
- */
- static inline uint8_t Pipe_Read_8(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_Read_8(void)
- {
- return *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- }
-
- /** Writes one byte to the currently selected pipe's bank, for IN direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- *
- * \param[in] Data Data to write into the the currently selected pipe's FIFO buffer.
- */
- static inline void Pipe_Write_8(const uint8_t Data) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Write_8(const uint8_t Data)
- {
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = Data;
- }
-
- /** Discards one byte from the currently selected pipe's bank, for OUT direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- */
- static inline void Pipe_Discard_8(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Discard_8(void)
- {
- uint8_t Dummy;
-
- Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
-
- (void)Dummy;
- }
-
- /** Reads two bytes from the currently selected pipe's bank in little endian format, for OUT
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- *
- * \return Next two bytes in the currently selected pipe's FIFO buffer.
- */
- static inline uint16_t Pipe_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Pipe_Read_16_LE(void)
- {
- uint16_t Byte0 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- uint16_t Byte1 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
-
- return ((Byte1 << 8) | Byte0);
- }
-
- /** Reads two bytes from the currently selected pipe's bank in big endian format, for OUT
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- *
- * \return Next two bytes in the currently selected pipe's FIFO buffer.
- */
- static inline uint16_t Pipe_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Pipe_Read_16_BE(void)
- {
- uint16_t Byte0 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- uint16_t Byte1 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
-
- return ((Byte0 << 8) | Byte1);
- }
-
- /** Writes two bytes to the currently selected pipe's bank in little endian format, for IN
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- *
- * \param[in] Data Data to write to the currently selected pipe's FIFO buffer.
- */
- static inline void Pipe_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Write_16_LE(const uint16_t Data)
- {
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data & 0xFF);
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 8);
- }
-
- /** Writes two bytes to the currently selected pipe's bank in big endian format, for IN
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- *
- * \param[in] Data Data to write to the currently selected pipe's FIFO buffer.
- */
- static inline void Pipe_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Write_16_BE(const uint16_t Data)
- {
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 8);
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data & 0xFF);
- }
-
- /** Discards two bytes from the currently selected pipe's bank, for OUT direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- */
- static inline void Pipe_Discard_16(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Discard_16(void)
- {
- uint8_t Dummy;
-
- Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
-
- (void)Dummy;
- }
-
- /** Reads four bytes from the currently selected pipe's bank in little endian format, for OUT
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- *
- * \return Next four bytes in the currently selected pipe's FIFO buffer.
- */
- static inline uint32_t Pipe_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Pipe_Read_32_LE(void)
- {
- uint32_t Byte0 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- uint32_t Byte1 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- uint32_t Byte2 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- uint32_t Byte3 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
-
- return ((Byte3 << 24) | (Byte2 << 16) | (Byte1 << 8) | Byte0);
- }
-
- /** Reads four bytes from the currently selected pipe's bank in big endian format, for OUT
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- *
- * \return Next four bytes in the currently selected pipe's FIFO buffer.
- */
- static inline uint32_t Pipe_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Pipe_Read_32_BE(void)
- {
- uint32_t Byte0 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- uint32_t Byte1 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- uint32_t Byte2 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- uint32_t Byte3 = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
-
- return ((Byte0 << 24) | (Byte1 << 16) | (Byte2 << 8) | Byte3);
- }
-
- /** Writes four bytes to the currently selected pipe's bank in little endian format, for IN
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- *
- * \param[in] Data Data to write to the currently selected pipe's FIFO buffer.
- */
- static inline void Pipe_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Write_32_LE(const uint32_t Data)
- {
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data & 0xFF);
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 8);
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 16);
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 24);
- }
-
- /** Writes four bytes to the currently selected pipe's bank in big endian format, for IN
- * direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- *
- * \param[in] Data Data to write to the currently selected pipe's FIFO buffer.
- */
- static inline void Pipe_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Write_32_BE(const uint32_t Data)
- {
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 24);
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 16);
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data >> 8);
- *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++) = (Data & 0xFF);
- }
-
- /** Discards four bytes from the currently selected pipe's bank, for OUT direction pipes.
- *
- * \ingroup Group_PipePrimitiveRW_UC3
- */
- static inline void Pipe_Discard_32(void) ATTR_ALWAYS_INLINE;
- static inline void Pipe_Discard_32(void)
- {
- uint8_t Dummy;
-
- Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
- Dummy = *(USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe]++);
-
- (void)Dummy;
- }
-
- /* External Variables: */
- /** Global indicating the maximum packet size of the default control pipe located at address
- * 0 in the device. This value is set to the value indicated in the attached device's device
- * descriptor once the USB interface is initialized into host mode and a device is attached
- * to the USB bus.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- */
- extern uint8_t USB_Host_ControlPipeSize;
-
- /* Function Prototypes: */
- /** Configures a table of pipe descriptions, in sequence. This function can be used to configure multiple
- * pipes at the same time.
- *
- * \note Pipe with a zero address will be ignored, thus this function cannot be used to configure the
- * control pipe.
- *
- * \param[in] Table Pointer to a table of pipe descriptions.
- * \param[in] Entries Number of entries in the pipe table to configure.
- *
- * \return Boolean \c true if all pipes configured successfully, \c false otherwise.
- */
- bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table,
- const uint8_t Entries);
-
- /** Configures the specified pipe address with the given pipe type, endpoint address within the attached device, bank size
- * and number of hardware banks.
- *
- * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze()
- * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or
- * sending data to the device in OUT mode. IN type pipes are also automatically configured to accept infinite
- * numbers of IN requests without automatic freezing - this can be overridden by a call to
- * \ref Pipe_SetFiniteINRequests().
- *
- * \param[in] Address Pipe address to configure.
- *
- * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low
- * Speed USB devices - refer to the USB 2.0 specification.
- *
- * \param[in] EndpointAddress Endpoint address within the attached device that the pipe should interface to.
- *
- * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to
- * the USB device, or after they have been received from the USB device (depending on
- * the pipe's data direction). The bank size must indicate the maximum packet size that
- * the pipe can handle.
- *
- * \param[in] Banks Number of banks to use for the pipe being configured.
- *
- * \note When the \c ORDERED_EP_CONFIG compile time option is used, Pipes <b>must</b> be configured in ascending order,
- * or bank corruption will occur.
- * \n\n
- *
- * \note Certain microcontroller model's pipes may have different maximum packet sizes based on the pipe's
- * index - refer to the chosen microcontroller's datasheet to determine the maximum bank size for each pipe.
- * \n\n
- *
- * \note The default control pipe should not be manually configured by the user application, as it is
- * automatically configured by the library internally.
- * \n\n
- *
- * \note This routine will automatically select the specified pipe upon success. Upon failure, the pipe which
- * failed to reconfigure correctly will be selected.
- *
- * \return Boolean \c true if the configuration succeeded, \c false otherwise.
- */
- bool Pipe_ConfigurePipe(const uint8_t Address,
- const uint8_t Type,
- const uint8_t EndpointAddress,
- const uint16_t Size,
- const uint8_t Banks);
-
- /** Spin-loops until the currently selected non-control pipe is ready for the next packet of data to be read
- * or written to it, aborting in the case of an error condition (such as a timeout or device disconnect).
- *
- * \ingroup Group_PipeRW_UC3
- *
- * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t Pipe_WaitUntilReady(void);
-
- /** Determines if a pipe has been bound to the given device endpoint address. If a pipe which is bound to the given
- * endpoint is found, it is automatically selected.
- *
- * \param[in] EndpointAddress Address and direction mask of the endpoint within the attached device to check.
- *
- * \return Boolean \c true if a pipe bound to the given endpoint address of the specified direction is found,
- * \c false otherwise.
- */
- bool Pipe_IsEndpointBound(const uint8_t EndpointAddress) ATTR_WARN_UNUSED_RESULT;
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #if !defined(ENDPOINT_CONTROLEP)
- #define ENDPOINT_CONTROLEP 0
- #endif
-
- /* Inline Functions: */
- static inline uint8_t Pipe_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST ATTR_ALWAYS_INLINE;
- static inline uint8_t Pipe_BytesToEPSizeMask(const uint16_t Bytes)
- {
- uint8_t MaskVal = 0;
- uint16_t CheckBytes = 8;
-
- while ((CheckBytes < Bytes) && (CheckBytes < PIPE_MAX_SIZE))
- {
- MaskVal++;
- CheckBytes <<= 1;
- }
-
- return (MaskVal << AVR32_USBB_PSIZE_OFFSET);
- }
-
- /* Function Prototypes: */
- void Pipe_ClearPipes(void);
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c deleted file mode 100644 index ab69536b0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_R.c +++ /dev/null @@ -1,85 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (void* const Buffer,
- uint16_t Length)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
-
- if (!(Length))
- Endpoint_ClearOUT();
-
- while (Length)
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- else if (Endpoint_IsSETUPReceived())
- return ENDPOINT_RWCSTREAM_HostAborted;
-
- if (Endpoint_IsOUTReceived())
- {
- while (Length && Endpoint_BytesInEndpoint())
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- }
-
- Endpoint_ClearOUT();
- }
- }
-
- while (!(Endpoint_IsINReady()))
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- }
-
- return ENDPOINT_RWCSTREAM_NoError;
-}
-
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_TRANSFER_BYTE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c deleted file mode 100644 index c2d171db0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_Control_W.c +++ /dev/null @@ -1,94 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (const void* const Buffer,
- uint16_t Length)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
- bool LastPacketFull = false;
-
- if (Length > USB_ControlRequest.wLength)
- Length = USB_ControlRequest.wLength;
- else if (!(Length))
- Endpoint_ClearIN();
-
- while (Length || LastPacketFull)
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- else if (Endpoint_IsSETUPReceived())
- return ENDPOINT_RWCSTREAM_HostAborted;
- else if (Endpoint_IsOUTReceived())
- break;
-
- if (Endpoint_IsINReady())
- {
- uint16_t BytesInEndpoint = Endpoint_BytesInEndpoint();
-
- while (Length && (BytesInEndpoint < USB_Device_ControlEndpointSize))
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- BytesInEndpoint++;
- }
-
- LastPacketFull = (BytesInEndpoint == USB_Device_ControlEndpointSize);
- Endpoint_ClearIN();
- }
- }
-
- while (!(Endpoint_IsOUTReceived()))
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- }
-
- return ENDPOINT_RWCSTREAM_NoError;
-}
-
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_TRANSFER_BYTE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c deleted file mode 100644 index 02ad97867..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Endpoint_RW.c +++ /dev/null @@ -1,90 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
- uint16_t BytesInTransfer = 0;
- uint8_t ErrorCode;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- {
- Length -= *BytesProcessed;
- TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed);
- }
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- TEMPLATE_CLEAR_ENDPOINT();
-
- #if !defined(INTERRUPT_CONTROL_ENDPOINT)
- USB_USBTask();
- #endif
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return ENDPOINT_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- BytesInTransfer++;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_BUFFER_TYPE
-#undef TEMPLATE_TRANSFER_BYTE
-#undef TEMPLATE_CLEAR_ENDPOINT
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c deleted file mode 100644 index 05846bb61..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/Template/Template_Pipe_RW.c +++ /dev/null @@ -1,89 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
- uint16_t BytesInTransfer = 0;
- uint8_t ErrorCode;
-
- Pipe_SetPipeToken(TEMPLATE_TOKEN);
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- {
- Length -= *BytesProcessed;
- TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed);
- }
-
- while (Length)
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- TEMPLATE_CLEAR_PIPE();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return PIPE_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- BytesInTransfer++;
- }
- }
-
- return PIPE_RWSTREAM_NoError;
-}
-
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_BUFFER_TYPE
-#undef TEMPLATE_TOKEN
-#undef TEMPLATE_TRANSFER_BYTE
-#undef TEMPLATE_CLEAR_PIPE
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c deleted file mode 100644 index 8ee63318f..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBController_UC3.c +++ /dev/null @@ -1,222 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_UC3)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#define __INCLUDE_FROM_USB_CONTROLLER_C
-#include "../USBController.h"
-
-#if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY))
-volatile uint8_t USB_CurrentMode = USB_MODE_None;
-#endif
-
-#if !defined(USE_STATIC_OPTIONS)
-volatile uint8_t USB_Options;
-#endif
-
-void USB_Init(
- #if defined(USB_CAN_BE_BOTH)
- const uint8_t Mode
- #endif
-
- #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
- ,
- #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
- void
- #endif
-
- #if !defined(USE_STATIC_OPTIONS)
- const uint8_t Options
- #endif
- )
-{
- #if !defined(USE_STATIC_OPTIONS)
- USB_Options = Options;
- #endif
-
- #if defined(USB_CAN_BE_BOTH)
- if (Mode == USB_MODE_UID)
- {
- AVR32_USBB.USBCON.uide = true;
- USB_INT_Enable(USB_INT_IDTI);
- USB_CurrentMode = USB_GetUSBModeFromUID();
- }
- else
- {
- AVR32_USBB.USBCON.uide = false;
- USB_CurrentMode = Mode;
- }
- #else
- AVR32_USBB.USBCON.uide = false;
- #endif
-
- USB_IsInitialized = true;
-
- USB_ResetInterface();
-}
-
-void USB_Disable(void)
-{
- USB_INT_DisableAllInterrupts();
- USB_INT_ClearAllInterrupts();
-
- USB_Detach();
- USB_Controller_Disable();
-
- USB_OTGPAD_Off();
-
- #if defined(USB_CAN_BE_BOTH)
- USB_CurrentMode = USB_MODE_None;
- #endif
-
- AVR32_PM.GCCTRL[3].cen = false;
-
- USB_IsInitialized = false;
-}
-
-void USB_ResetInterface(void)
-{
- #if defined(USB_CAN_BE_BOTH)
- bool UIDModeSelectEnabled = AVR32_USBB.USBCON.uide;
- #endif
-
- AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].pllsel = !(USB_Options & USB_OPT_GCLK_SRC_OSC);
- AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].oscsel = !(USB_Options & USB_OPT_GCLK_CHANNEL_0);
- AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].diven = (F_USB != USB_CLOCK_REQUIRED_FREQ);
- AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].div = (F_USB == USB_CLOCK_REQUIRED_FREQ) ? 0 : (uint32_t)((F_USB / USB_CLOCK_REQUIRED_FREQ / 2) - 1);
- AVR32_PM.GCCTRL[AVR32_PM_GCLK_USBB].cen = true;
-
- USB_INT_DisableAllInterrupts();
- USB_INT_ClearAllInterrupts();
-
- USB_Controller_Reset();
-
- #if defined(USB_CAN_BE_BOTH)
- if (UIDModeSelectEnabled)
- USB_INT_Enable(USB_INT_IDTI);
- #endif
-
- USB_CLK_Unfreeze();
-
- if (USB_CurrentMode == USB_MODE_Device)
- {
- #if defined(USB_CAN_BE_DEVICE)
- AVR32_USBB.USBCON.uimod = true;
-
- USB_Init_Device();
- #endif
- }
- else if (USB_CurrentMode == USB_MODE_Host)
- {
- #if defined(INVERTED_VBUS_ENABLE_LINE)
- AVR32_USBB.USBCON.vbuspo = true;
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- AVR32_USBB.USBCON.uimod = false;
-
- USB_Init_Host();
- #endif
- }
-
- USB_OTGPAD_On();
-}
-
-#if defined(USB_CAN_BE_DEVICE)
-static void USB_Init_Device(void)
-{
- USB_DeviceState = DEVICE_STATE_Unattached;
- USB_Device_ConfigurationNumber = 0;
-
- #if !defined(NO_DEVICE_REMOTE_WAKEUP)
- USB_Device_RemoteWakeupEnabled = false;
- #endif
-
- #if !defined(NO_DEVICE_SELF_POWER)
- USB_Device_CurrentlySelfPowered = false;
- #endif
-
- #if !defined(FIXED_CONTROL_ENDPOINT_SIZE)
- USB_Descriptor_Device_t* DeviceDescriptorPtr;
-
- if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
- USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
- #endif
-
- if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
- {
- USB_Device_SetLowSpeed();
- }
- else
- {
- #if defined(USB_DEVICE_OPT_HIGHSPEED)
- if (USB_Options & USB_DEVICE_OPT_HIGHSPEED)
- USB_Device_SetHighSpeed();
- else
- USB_Device_SetFullSpeed();
- #else
- USB_Device_SetFullSpeed();
- #endif
- }
-
- USB_INT_Enable(USB_INT_VBUSTI);
-
- Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
- USB_Device_ControlEndpointSize, 1);
-
- USB_INT_Clear(USB_INT_SUSPI);
- USB_INT_Enable(USB_INT_SUSPI);
- USB_INT_Enable(USB_INT_EORSTI);
-
- USB_Attach();
-}
-#endif
-
-#if defined(USB_CAN_BE_HOST)
-static void USB_Init_Host(void)
-{
- USB_HostState = HOST_STATE_Unattached;
- USB_Host_ConfigurationNumber = 0;
- USB_Host_ControlPipeSize = PIPE_CONTROLPIPE_DEFAULT_SIZE;
-
- USB_Host_HostMode_On();
-
- USB_Host_VBUS_Auto_On();
-
- USB_INT_Enable(USB_INT_DCONNI);
- USB_INT_Enable(USB_INT_BCERRI);
-
- USB_Attach();
-}
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h deleted file mode 100644 index bcae49bd4..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBController_UC3.h +++ /dev/null @@ -1,365 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Controller definitions for the AVR32 UC3 microcontrollers.
- * \copydetails Group_USBManagement_UC3
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USBManagement
- * \defgroup Group_USBManagement_UC3 USB Interface Management (UC3)
- * \brief USB Controller definitions for the AVR32 UC3 microcontrollers.
- *
- * Functions, macros, variables, enums and types related to the setup and management of the USB interface.
- *
- * @{
- */
-
-#ifndef __USBCONTROLLER_UC3_H__
-#define __USBCONTROLLER_UC3_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBMode.h"
- #include "../Events.h"
- #include "../USBTask.h"
- #include "../USBInterrupt.h"
-
- #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)
- #include "../Host.h"
- #include "../OTG.h"
- #include "../Pipe.h"
- #include "../HostStandardReq.h"
- #include "../PipeStream.h"
- #endif
-
- #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)
- #include "../Device.h"
- #include "../Endpoint.h"
- #include "../DeviceStandardReq.h"
- #include "../EndpointStream.h"
- #endif
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks and Defines: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- #if !defined(F_USB)
- #error F_USB is not defined. You must define F_USB to the frequency of the clock input to the USB module.
- #endif
-
- #if (defined(USB_SERIES_UC3A3_AVR) || defined(USB_SERIES_UC3A4_AVR))
- #if ((F_USB < 12000000) || (F_USB % 12000000))
- #error Invalid F_USB specified. F_USB must be a multiple of 12MHz for UC3A3 and UC3A4 devices.
- #endif
- #else
- #if ((F_USB < 48000000) || (F_USB % 48000000))
- #error Invalid F_USB specified. F_USB must be a multiple of 48MHz for UC3A and UC3B devices.
- #endif
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name USB Controller Option Masks */
- //@{
- /** Selects one of the system's main clock oscillators as the input clock to the USB Generic Clock source
- * generation module. This indicates that an external oscillator should be used directly instead of an
- * internal PLL clock source.
- */
- #define USB_OPT_GCLK_SRC_OSC (1 << 2)
-
- /** Selects one of the system's PLL oscillators as the input clock to the USB Generic Clock source
- * generation module. This indicates that one of the device's PLL outputs should be used instead of an
- * external oscillator source.
- */
- #define USB_OPT_GCLK_SRC_PLL (0 << 2)
-
- /** Selects PLL or External Oscillator 0 as the USB Generic Clock source module input clock. */
- #define USB_OPT_GCLK_CHANNEL_0 (1 << 3)
-
- /** Selects PLL or External Oscillator 1 as the USB Generic Clock source module input clock. */
- #define USB_OPT_GCLK_CHANNEL_1 (0 << 3)
- //@}
-
- #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
- /** Constant for the maximum software timeout period of the USB data stream transfer functions
- * (both control and standard) when in either device or host mode. If the next packet of a stream
- * is not received or acknowledged within this time period, the stream function will fail.
- *
- * This value may be overridden in the user project makefile as the value of the
- * \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch.
- */
- #define USB_STREAM_TIMEOUT_MS 100
- #endif
-
- /* Inline Functions: */
- /** Determines if the VBUS line is currently high (i.e. the USB host is supplying power).
- *
- * \return Boolean \c true if the VBUS line is currently detecting power from a host, \c false otherwise.
- */
- static inline bool USB_VBUS_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool USB_VBUS_GetStatus(void)
- {
- return AVR32_USBB.USBSTA.vbus;
- }
-
- /** Detaches the device from the USB bus. This has the effect of removing the device from any
- * attached host, ceasing USB communications. If no host is present, this prevents any host from
- * enumerating the device once attached until \ref USB_Attach() is called.
- */
- static inline void USB_Detach(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Detach(void)
- {
- AVR32_USBB.UDCON.detach = true;
- }
-
- /** Attaches the device to the USB bus. This announces the device's presence to any attached
- * USB host, starting the enumeration process. If no host is present, attaching the device
- * will allow for enumeration once a host is connected to the device.
- *
- * This is inexplicably also required for proper operation while in host mode, to enable the
- * attachment of a device to the host. This is despite the bit being located in the device-mode
- * register and despite the datasheet making no mention of its requirement in host mode.
- */
- static inline void USB_Attach(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Attach(void)
- {
- AVR32_USBB.UDCON.detach = false;
- }
-
- /* Function Prototypes: */
- /** Main function to initialize and start the USB interface. Once active, the USB interface will
- * allow for device connection to a host when in device mode, or for device enumeration while in
- * host mode.
- *
- * As the USB library relies on interrupts for the device and host mode enumeration processes,
- * the user must enable global interrupts before or shortly after this function is called. In
- * device mode, interrupts must be enabled within 500ms of this function being called to ensure
- * that the host does not time out whilst enumerating the device. In host mode, interrupts may be
- * enabled at the application's leisure however enumeration will not begin of an attached device
- * until after this has occurred.
- *
- * Calling this function when the USB interface is already initialized will cause a complete USB
- * interface reset and re-enumeration.
- *
- * \param[in] Mode This is a mask indicating what mode the USB interface is to be initialized to, a value
- * from the \ref USB_Modes_t enum.
- *
- * \param[in] Options Mask indicating the options which should be used when initializing the USB
- * interface to control the USB interface's behavior. This should be comprised of
- * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
- * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
- * mode speed.
- *
- * \note To reduce the FLASH requirements of the library if only device or host mode is required,
- * the mode can be statically set in the project makefile by defining the token \c USB_DEVICE_ONLY
- * (for device mode) or \c USB_HOST_ONLY (for host mode), passing the token to the compiler
- * via the -D switch. If the mode is statically set, this parameter does not exist in the
- * function prototype.
- * \n\n
- *
- * \note To reduce the FLASH requirements of the library if only fixed settings are required,
- * the options may be set statically in the same manner as the mode (see the Mode parameter of
- * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token,
- * defined to the appropriate options masks. When the options are statically set, this
- * parameter does not exist in the function prototype.
- *
- * \see \ref Group_Device for the \c USB_DEVICE_OPT_* masks.
- */
- void USB_Init(
- #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)
- const uint8_t Mode
- #endif
-
- #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__)
- ,
- #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
- void
- #endif
-
- #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__)
- const uint8_t Options
- #endif
- );
-
- /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO
- * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface
- * is restarted with the \ref USB_Init() function.
- */
- void USB_Disable(void);
-
- /** Resets the interface, when already initialized. This will re-enumerate the device if already connected
- * to a host, or re-enumerate an already attached device when in host mode.
- */
- void USB_ResetInterface(void);
-
- /* Global Variables: */
- #if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__)
- /** Indicates the mode that the USB interface is currently initialized to, a value from the
- * \ref USB_Modes_t enum.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- *
- * \note When the controller is initialized into UID auto-detection mode, this variable will hold the
- * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller
- * is fixed into a specific mode (either through the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY compile time
- * options, or a limitation of the USB controller in the chosen device model) this will evaluate to
- * a constant of the appropriate value and will never evaluate to \ref USB_MODE_None even when the
- * USB interface is not initialized.
- */
- extern volatile uint8_t USB_CurrentMode;
- #elif defined(USB_HOST_ONLY)
- #define USB_CurrentMode USB_MODE_Host
- #elif defined(USB_DEVICE_ONLY)
- #define USB_CurrentMode USB_MODE_Device
- #endif
-
- #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__)
- /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init()
- * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- */
- extern volatile uint8_t USB_Options;
- #elif defined(USE_STATIC_OPTIONS)
- #define USB_Options USE_STATIC_OPTIONS
- #endif
-
- /* Enums: */
- /** Enum for the possible USB controller modes, for initialization via \ref USB_Init() and indication back to the
- * user application via \ref USB_CurrentMode.
- */
- enum USB_Modes_t
- {
- USB_MODE_None = 0, /**< Indicates that the controller is currently not initialized in any specific USB mode. */
- USB_MODE_Device = 1, /**< Indicates that the controller is currently initialized in USB Device mode. */
- USB_MODE_Host = 2, /**< Indicates that the controller is currently initialized in USB Host mode. */
- USB_MODE_UID = 3, /**< Indicates that the controller should determine the USB mode from the UID pin of the
- * USB connector.
- */
- };
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Macros: */
- #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32)
- #define USB_CLOCK_REQUIRED_FREQ 12000000UL
- #else
- #define USB_CLOCK_REQUIRED_FREQ 48000000UL
- #endif
-
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_USB_CONTROLLER_C)
- #if defined(USB_CAN_BE_DEVICE)
- static void USB_Init_Device(void);
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- static void USB_Init_Host(void);
- #endif
- #endif
-
- /* Inline Functions: */
- static inline void USB_OTGPAD_On(void) ATTR_ALWAYS_INLINE;
- static inline void USB_OTGPAD_On(void)
- {
- AVR32_USBB.USBCON.otgpade = true;
- }
-
- static inline void USB_OTGPAD_Off(void) ATTR_ALWAYS_INLINE;
- static inline void USB_OTGPAD_Off(void)
- {
- AVR32_USBB.USBCON.otgpade = false;
- }
-
- static inline void USB_CLK_Freeze(void) ATTR_ALWAYS_INLINE;
- static inline void USB_CLK_Freeze(void)
- {
- AVR32_USBB.USBCON.frzclk = true;
- }
-
- static inline void USB_CLK_Unfreeze(void) ATTR_ALWAYS_INLINE;
- static inline void USB_CLK_Unfreeze(void)
- {
- AVR32_USBB.USBCON.frzclk = false;
- }
-
- static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Controller_Enable(void)
- {
- AVR32_USBB.USBCON.usbe = true;
- }
-
- static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Controller_Disable(void)
- {
- AVR32_USBB.USBCON.usbe = false;
- }
-
- static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Controller_Reset(void)
- {
- AVR32_USBB.USBCON.usbe = false;
- AVR32_USBB.USBCON.usbe = true;
- }
-
- #if defined(USB_CAN_BE_BOTH)
- static inline uint8_t USB_GetUSBModeFromUID(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t USB_GetUSBModeFromUID(void)
- {
- if (AVR32_USBB.USBSTA.id)
- return USB_MODE_Device;
- else
- return USB_MODE_Host;
- }
- #endif
-
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c deleted file mode 100644 index e11a4b642..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.c +++ /dev/null @@ -1,228 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_UC3)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBInterrupt.h"
-
-void USB_INT_DisableAllInterrupts(void)
-{
- AVR32_USBB.USBCON.vbuste = false;
- AVR32_USBB.USBCON.idte = false;
-
- AVR32_USBB.uhinteclr = -1;
- AVR32_USBB.udinteclr = -1;
-}
-
-void USB_INT_ClearAllInterrupts(void)
-{
- AVR32_USBB.USBSTACLR.vbustic = true;
- AVR32_USBB.USBSTACLR.idtic = true;
-
- AVR32_USBB.uhintclr = -1;
- AVR32_USBB.udintclr = -1;
-}
-
-ISR(USB_GEN_vect)
-{
- #if defined(USB_CAN_BE_DEVICE)
- #if !defined(NO_SOF_EVENTS)
- if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI))
- {
- USB_INT_Clear(USB_INT_SOFI);
-
- EVENT_USB_Device_StartOfFrame();
- }
- #endif
-
- if (USB_INT_HasOccurred(USB_INT_VBUSTI) && USB_INT_IsEnabled(USB_INT_VBUSTI))
- {
- USB_INT_Clear(USB_INT_VBUSTI);
-
- if (USB_VBUS_GetStatus())
- {
- USB_DeviceState = DEVICE_STATE_Powered;
- EVENT_USB_Device_Connect();
- }
- else
- {
- USB_DeviceState = DEVICE_STATE_Unattached;
- EVENT_USB_Device_Disconnect();
- }
- }
-
- if (USB_INT_HasOccurred(USB_INT_SUSPI) && USB_INT_IsEnabled(USB_INT_SUSPI))
- {
- USB_INT_Disable(USB_INT_SUSPI);
- USB_INT_Enable(USB_INT_WAKEUPI);
-
- USB_CLK_Freeze();
-
- USB_DeviceState = DEVICE_STATE_Suspended;
- EVENT_USB_Device_Suspend();
- }
-
- if (USB_INT_HasOccurred(USB_INT_WAKEUPI) && USB_INT_IsEnabled(USB_INT_WAKEUPI))
- {
- USB_CLK_Unfreeze();
-
- USB_INT_Clear(USB_INT_WAKEUPI);
-
- USB_INT_Disable(USB_INT_WAKEUPI);
- USB_INT_Enable(USB_INT_SUSPI);
-
- if (USB_Device_ConfigurationNumber)
- USB_DeviceState = DEVICE_STATE_Configured;
- else
- USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered;
-
- EVENT_USB_Device_WakeUp();
- }
-
- if (USB_INT_HasOccurred(USB_INT_EORSTI) && USB_INT_IsEnabled(USB_INT_EORSTI))
- {
- USB_INT_Clear(USB_INT_EORSTI);
-
- USB_DeviceState = DEVICE_STATE_Default;
- USB_Device_ConfigurationNumber = 0;
-
- USB_INT_Clear(USB_INT_SUSPI);
- USB_INT_Disable(USB_INT_SUSPI);
- USB_INT_Enable(USB_INT_WAKEUPI);
-
- USB_Device_SetDeviceAddress(0);
- Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
- USB_Device_ControlEndpointSize, 1);
-
- #if defined(INTERRUPT_CONTROL_ENDPOINT)
- USB_INT_Enable(USB_INT_RXSTPI);
- #endif
-
- EVENT_USB_Device_Reset();
- }
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- #if !defined(NO_SOF_EVENTS)
- if (USB_INT_HasOccurred(USB_INT_HSOFI) && USB_INT_IsEnabled(USB_INT_HSOFI))
- {
- USB_INT_Clear(USB_INT_HSOFI);
-
- EVENT_USB_Host_StartOfFrame();
- }
- #endif
-
- if (USB_INT_HasOccurred(USB_INT_DDISCI) && USB_INT_IsEnabled(USB_INT_DDISCI))
- {
- USB_INT_Clear(USB_INT_DDISCI);
- USB_INT_Clear(USB_INT_DCONNI);
- USB_INT_Disable(USB_INT_DDISCI);
-
- EVENT_USB_Host_DeviceUnattached();
-
- USB_ResetInterface();
- }
-
- if (USB_INT_HasOccurred(USB_INT_VBERRI) && USB_INT_IsEnabled(USB_INT_VBERRI))
- {
- USB_INT_Clear(USB_INT_VBERRI);
-
- USB_Host_VBUS_Manual_Off();
- USB_Host_VBUS_Auto_Off();
-
- EVENT_USB_Host_HostError(HOST_ERROR_VBusVoltageDip);
- EVENT_USB_Host_DeviceUnattached();
-
- USB_HostState = HOST_STATE_Unattached;
- }
-
- if (USB_INT_HasOccurred(USB_INT_DCONNI) && USB_INT_IsEnabled(USB_INT_DCONNI))
- {
- USB_INT_Clear(USB_INT_DCONNI);
- USB_INT_Disable(USB_INT_DCONNI);
-
- EVENT_USB_Host_DeviceAttached();
-
- USB_INT_Enable(USB_INT_DDISCI);
-
- USB_HostState = HOST_STATE_Powered;
- }
-
- if (USB_INT_HasOccurred(USB_INT_BCERRI) && USB_INT_IsEnabled(USB_INT_BCERRI))
- {
- USB_INT_Clear(USB_INT_BCERRI);
-
- EVENT_USB_Host_DeviceEnumerationFailed(HOST_ENUMERROR_NoDeviceDetected, 0);
- EVENT_USB_Host_DeviceUnattached();
-
- USB_ResetInterface();
- }
- #endif
-
- #if defined(USB_CAN_BE_BOTH)
- if (USB_INT_HasOccurred(USB_INT_IDTI) && USB_INT_IsEnabled(USB_INT_IDTI))
- {
- USB_INT_Clear(USB_INT_IDTI);
-
- if (USB_DeviceState != DEVICE_STATE_Unattached)
- EVENT_USB_Device_Disconnect();
-
- if (USB_HostState != HOST_STATE_Unattached)
- EVENT_USB_Host_DeviceUnattached();
-
- USB_CurrentMode = USB_GetUSBModeFromUID();
- USB_ResetInterface();
-
- EVENT_USB_UIDChange();
- }
- #endif
-}
-
-#if defined(INTERRUPT_CONTROL_ENDPOINT) && defined(USB_CAN_BE_DEVICE)
-ISR(USB_COM_vect)
-{
- uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();
-
- Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
- USB_INT_Disable(USB_INT_RXSTPI);
-
- GlobalInterruptEnable();
-
- USB_Device_ProcessControlRequest();
-
- Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
- USB_INT_Enable(USB_INT_RXSTPI);
- Endpoint_SelectEndpoint(PrevSelectedEndpoint);
-}
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.h deleted file mode 100644 index 625e3f782..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/UC3/USBInterrupt_UC3.h +++ /dev/null @@ -1,370 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Controller Interrupt definitions for the AVR32 UC3 microcontrollers.
- *
- * This file contains definitions required for the correct handling of low level USB service routine interrupts
- * from the USB controller.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-#ifndef __USBINTERRUPT_UC3_H__
-#define __USBINTERRUPT_UC3_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* External Variables: */
- extern volatile uint32_t USB_Endpoint_SelectedEndpoint;
-
- /* Enums: */
- enum USB_Interrupts_t
- {
- USB_INT_VBUSTI = 0,
- #if (defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__))
- USB_INT_IDTI = 1,
- #endif
- #if (defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__))
- USB_INT_WAKEUPI = 2,
- USB_INT_SUSPI = 3,
- USB_INT_EORSTI = 4,
- USB_INT_SOFI = 5,
- USB_INT_RXSTPI = 6,
- #endif
- #if (defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__))
- USB_INT_HSOFI = 7,
- USB_INT_DCONNI = 8,
- USB_INT_DDISCI = 9,
- USB_INT_RSTI = 10,
- USB_INT_BCERRI = 11,
- USB_INT_VBERRI = 12,
- #endif
- };
-
- /* Inline Functions: */
- static inline void USB_INT_Enable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE;
- static inline void USB_INT_Enable(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- case USB_INT_VBUSTI:
- AVR32_USBB.USBCON.vbuste = true;
- break;
- #if defined(USB_CAN_BE_BOTH)
- case USB_INT_IDTI:
- AVR32_USBB.USBCON.idte = true;
- break;
- #endif
- #if defined(USB_CAN_BE_DEVICE)
- case USB_INT_WAKEUPI:
- AVR32_USBB.UDINTESET.wakeupes = true;
- break;
- case USB_INT_SUSPI:
- AVR32_USBB.UDINTESET.suspes = true;
- break;
- case USB_INT_EORSTI:
- AVR32_USBB.UDINTESET.eorstes = true;
- break;
- case USB_INT_SOFI:
- AVR32_USBB.UDINTESET.sofes = true;
- break;
- case USB_INT_RXSTPI:
- (&AVR32_USBB.UECON0SET)[USB_Endpoint_SelectedEndpoint].rxstpes = true;
- break;
- #endif
- #if defined(USB_CAN_BE_HOST)
- case USB_INT_HSOFI:
- AVR32_USBB.UHINTESET.hsofies = true;
- break;
- case USB_INT_DCONNI:
- AVR32_USBB.UHINTESET.dconnies = true;
- break;
- case USB_INT_DDISCI:
- AVR32_USBB.UHINTESET.ddiscies = true;
- break;
- case USB_INT_RSTI:
- AVR32_USBB.UHINTESET.rsties = true;
- break;
- case USB_INT_BCERRI:
- AVR32_USBB.USBCON.bcerre = true;
- break;
- case USB_INT_VBERRI:
- AVR32_USBB.USBCON.vberre = true;
- break;
- #endif
- }
- }
-
- static inline void USB_INT_Disable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE;
- static inline void USB_INT_Disable(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- case USB_INT_VBUSTI:
- AVR32_USBB.USBCON.vbuste = false;
- break;
- #if defined(USB_CAN_BE_BOTH)
- case USB_INT_IDTI:
- AVR32_USBB.USBCON.idte = false;
- break;
- #endif
- #if defined(USB_CAN_BE_DEVICE)
- case USB_INT_WAKEUPI:
- AVR32_USBB.UDINTECLR.wakeupec = true;
- break;
- case USB_INT_SUSPI:
- AVR32_USBB.UDINTECLR.suspec = true;
- break;
- case USB_INT_EORSTI:
- AVR32_USBB.UDINTECLR.eorstec = true;
- break;
- case USB_INT_SOFI:
- AVR32_USBB.UDINTECLR.sofec = true;
- break;
- case USB_INT_RXSTPI:
- (&AVR32_USBB.UECON0CLR)[USB_Endpoint_SelectedEndpoint].rxstpec = true;
- break;
- #endif
- #if defined(USB_CAN_BE_HOST)
- case USB_INT_HSOFI:
- AVR32_USBB.UHINTECLR.hsofiec = true;
- break;
- case USB_INT_DCONNI:
- AVR32_USBB.UHINTECLR.dconniec = true;
- break;
- case USB_INT_DDISCI:
- AVR32_USBB.UHINTECLR.ddisciec = true;
- break;
- case USB_INT_RSTI:
- AVR32_USBB.UHINTECLR.rstiec = true;
- break;
- case USB_INT_BCERRI:
- AVR32_USBB.USBCON.bcerre = false;
- break;
- case USB_INT_VBERRI:
- AVR32_USBB.USBCON.vberre = false;
- break;
- #endif
- }
- }
-
- static inline void USB_INT_Clear(const uint8_t Interrupt) ATTR_ALWAYS_INLINE;
- static inline void USB_INT_Clear(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- case USB_INT_VBUSTI:
- AVR32_USBB.USBSTACLR.vbustic = true;
- (void)AVR32_USBB.USBSTACLR;
- break;
- #if defined(USB_CAN_BE_BOTH)
- case USB_INT_IDTI:
- AVR32_USBB.USBSTACLR.idtic = true;
- (void)AVR32_USBB.USBSTACLR;
- break;
- #endif
- #if defined(USB_CAN_BE_DEVICE)
- case USB_INT_WAKEUPI:
- AVR32_USBB.UDINTCLR.wakeupc = true;
- (void)AVR32_USBB.UDINTCLR;
- break;
- case USB_INT_SUSPI:
- AVR32_USBB.UDINTCLR.suspc = true;
- (void)AVR32_USBB.UDINTCLR;
- break;
- case USB_INT_EORSTI:
- AVR32_USBB.UDINTCLR.eorstc = true;
- (void)AVR32_USBB.UDINTCLR;
- break;
- case USB_INT_SOFI:
- AVR32_USBB.UDINTCLR.sofc = true;
- (void)AVR32_USBB.UDINTCLR;
- break;
- case USB_INT_RXSTPI:
- (&AVR32_USBB.UESTA0CLR)[USB_Endpoint_SelectedEndpoint].rxstpic = true;
- break;
- #endif
- #if defined(USB_CAN_BE_HOST)
- case USB_INT_HSOFI:
- AVR32_USBB.UHINTCLR.hsofic = true;
- (void)AVR32_USBB.UHINTCLR;
- break;
- case USB_INT_DCONNI:
- AVR32_USBB.UHINTCLR.dconnic = true;
- (void)AVR32_USBB.UHINTCLR;
- break;
- case USB_INT_DDISCI:
- AVR32_USBB.UHINTCLR.ddiscic = true;
- (void)AVR32_USBB.UHINTCLR;
- break;
- case USB_INT_RSTI:
- AVR32_USBB.UHINTCLR.rstic = true;
- (void)AVR32_USBB.UHINTCLR;
- break;
- case USB_INT_BCERRI:
- AVR32_USBB.USBSTACLR.bcerric = true;
- (void)AVR32_USBB.USBSTACLR;
- break;
- case USB_INT_VBERRI:
- AVR32_USBB.USBSTACLR.vberric = true;
- (void)AVR32_USBB.USBSTACLR;
- break;
- #endif
- }
- }
-
- static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline bool USB_INT_IsEnabled(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- case USB_INT_VBUSTI:
- return AVR32_USBB.USBCON.vbuste;
- #if defined(USB_CAN_BE_BOTH)
- case USB_INT_IDTI:
- return AVR32_USBB.USBCON.idte;
- #endif
- #if defined(USB_CAN_BE_DEVICE)
- case USB_INT_WAKEUPI:
- return AVR32_USBB.UDINTE.wakeupe;
- case USB_INT_SUSPI:
- return AVR32_USBB.UDINTE.suspe;
- case USB_INT_EORSTI:
- return AVR32_USBB.UDINTE.eorste;
- case USB_INT_SOFI:
- return AVR32_USBB.UDINTE.sofe;
- case USB_INT_RXSTPI:
- return (&AVR32_USBB.UECON0)[USB_Endpoint_SelectedEndpoint].rxstpe;
- #endif
- #if defined(USB_CAN_BE_HOST)
- case USB_INT_HSOFI:
- return AVR32_USBB.UHINTE.hsofie;
- case USB_INT_DCONNI:
- return AVR32_USBB.UHINTE.dconnie;
- case USB_INT_DDISCI:
- return AVR32_USBB.UHINTE.ddiscie;
- case USB_INT_RSTI:
- return AVR32_USBB.UHINTE.rstie;
- case USB_INT_BCERRI:
- return AVR32_USBB.USBCON.bcerre;
- case USB_INT_VBERRI:
- return AVR32_USBB.USBCON.vberre;
- #endif
- }
-
- return false;
- }
-
- static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline bool USB_INT_HasOccurred(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- case USB_INT_VBUSTI:
- return AVR32_USBB.USBSTA.vbusti;
- #if defined(USB_CAN_BE_BOTH)
- case USB_INT_IDTI:
- return AVR32_USBB.USBSTA.idti;
- #endif
- #if defined(USB_CAN_BE_DEVICE)
- case USB_INT_WAKEUPI:
- return AVR32_USBB.UDINT.wakeup;
- case USB_INT_SUSPI:
- return AVR32_USBB.UDINT.susp;
- case USB_INT_EORSTI:
- return AVR32_USBB.UDINT.eorst;
- case USB_INT_SOFI:
- return AVR32_USBB.UDINT.sof;
- case USB_INT_RXSTPI:
- return (&AVR32_USBB.UESTA0)[USB_Endpoint_SelectedEndpoint].rxstpi;
- #endif
- #if defined(USB_CAN_BE_HOST)
- case USB_INT_HSOFI:
- return AVR32_USBB.UHINT.hsofi;
- case USB_INT_DCONNI:
- return AVR32_USBB.UHINT.dconni;
- case USB_INT_DDISCI:
- return AVR32_USBB.UHINT.ddisci;
- case USB_INT_RSTI:
- return AVR32_USBB.UHINT.rsti;
- case USB_INT_BCERRI:
- return AVR32_USBB.USBSTA.bcerri;
- case USB_INT_VBERRI:
- return AVR32_USBB.USBSTA.vberri;
- #endif
- }
-
- return false;
- }
-
- /* Includes: */
- #include "../USBMode.h"
- #include "../Events.h"
- #include "../USBController.h"
-
- /* Function Prototypes: */
- void USB_INT_ClearAllInterrupts(void);
- void USB_INT_DisableAllInterrupts(void);
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Function Prototypes: */
- #if defined(__DOXYGEN__)
- /** Interrupt service routine handler for the USB controller ISR group. This interrupt routine <b>must</b> be
- * linked to the entire USB controller ISR vector group inside the AVR32's interrupt controller peripheral,
- * using the user application's preferred USB controller driver.
- */
- void USB_GEN_vect(void);
- #else
- ISR(USB_GEN_vect);
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBController.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBController.h deleted file mode 100644 index 9b1f0a9a6..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBController.h +++ /dev/null @@ -1,151 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Common USB Controller definitions for all architectures.
- * \copydetails Group_USBManagement
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_USBManagement USB Interface Management
- * \brief USB Controller definitions for general USB controller management.
- *
- * Functions, macros, variables, enums and types related to the setup and management of the USB interface.
- *
- * @{
- */
-
-#ifndef __USBCONTROLLER_H__
-#define __USBCONTROLLER_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks and Defines: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Defines: */
- /** \name Endpoint Direction Masks */
- //@{
- /** Endpoint direction mask, for masking against endpoint addresses to retrieve the endpoint's
- * direction for comparing with the \c ENDPOINT_DIR_* masks.
- */
- #define ENDPOINT_DIR_MASK 0x80
-
- /** Endpoint address direction mask for an OUT direction (Host to Device) endpoint. This may be ORed with
- * the index of the address within a device to obtain the full endpoint address.
- */
- #define ENDPOINT_DIR_OUT 0x00
-
- /** Endpoint address direction mask for an IN direction (Device to Host) endpoint. This may be ORed with
- * the index of the address within a device to obtain the full endpoint address.
- */
- #define ENDPOINT_DIR_IN 0x80
- //@}
-
- /** \name Pipe Direction Masks */
- //@{
- /** Pipe direction mask, for masking against pipe addresses to retrieve the pipe's
- * direction for comparing with the \c PIPE_DIR_* masks.
- */
- #define PIPE_DIR_MASK 0x80
-
- /** Endpoint address direction mask for an OUT direction (Host to Device) endpoint. This may be ORed with
- * the index of the address within a device to obtain the full endpoint address.
- */
- #define PIPE_DIR_OUT 0x00
-
- /** Endpoint address direction mask for an IN direction (Device to Host) endpoint. This may be ORed with
- * the index of the address within a device to obtain the full endpoint address.
- */
- #define PIPE_DIR_IN 0x80
- //@}
-
- /** \name Endpoint/Pipe Type Masks */
- //@{
- /** Mask for determining the type of an endpoint from an endpoint descriptor. This should then be compared
- * with the \c EP_TYPE_* masks to determine the exact type of the endpoint.
- */
- #define EP_TYPE_MASK 0x03
-
- /** Mask for a CONTROL type endpoint or pipe.
- *
- * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions.
- */
- #define EP_TYPE_CONTROL 0x00
-
- /** Mask for an ISOCHRONOUS type endpoint or pipe.
- *
- * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions.
- */
- #define EP_TYPE_ISOCHRONOUS 0x01
-
- /** Mask for a BULK type endpoint or pipe.
- *
- * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions.
- */
- #define EP_TYPE_BULK 0x02
-
- /** Mask for an INTERRUPT type endpoint or pipe.
- *
- * \note See \ref Group_EndpointManagement and \ref Group_PipeManagement for endpoint/pipe functions.
- */
- #define EP_TYPE_INTERRUPT 0x03
- //@}
-
- /* Architecture Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/USBController_AVR8.h"
- #elif (ARCH == ARCH_UC3)
- #include "UC3/USBController_UC3.h"
- #elif (ARCH == ARCH_XMEGA)
- #include "XMEGA/USBController_XMEGA.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBInterrupt.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBInterrupt.h deleted file mode 100644 index 583860262..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBInterrupt.h +++ /dev/null @@ -1,73 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB controller interrupt service routine management.
- *
- * This file contains definitions required for the correct handling of low level USB service routine interrupts
- * from the USB controller.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-#ifndef __USBINTERRUPT_H__
-#define __USBINTERRUPT_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Architecture Includes: */
- #if (ARCH == ARCH_AVR8)
- #include "AVR8/USBInterrupt_AVR8.h"
- #elif (ARCH == ARCH_UC3)
- #include "UC3/USBInterrupt_UC3.h"
- #elif (ARCH == ARCH_XMEGA)
- #include "XMEGA/USBInterrupt_XMEGA.h"
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBMode.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBMode.h deleted file mode 100644 index 8a52b092b..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBMode.h +++ /dev/null @@ -1,286 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB mode and feature support definitions.
- * \copydetails Group_USBMode
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USB
- * \defgroup Group_USBMode USB Mode Tokens
- * \brief USB mode and feature support definitions.
- *
- * This file defines macros indicating the type of USB controller the library is being compiled for, and its
- * capabilities. These macros may then be referenced in the user application to selectively enable or disable
- * code sections depending on if they are defined or not.
- *
- * After the inclusion of the master USB driver header, one or more of the following tokens may be defined, to
- * allow the user code to conditionally enable or disable code based on the USB controller family and allowable
- * USB modes. These tokens may be tested against to eliminate code relating to a USB mode which is not enabled for
- * the given compilation.
- *
- * @{
- */
-
-#ifndef __USBMODE_H__
-#define __USBMODE_H__
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- #if defined(__DOXYGEN__)
- /** Indicates that the target AVR microcontroller belongs to the Series 2 AVR8 USB controller
- * (i.e. AT90USBxxx2 or ATMEGAxxU2) when defined.
- */
- #define USB_SERIES_2_AVR
-
- /** Indicates that the target AVR microcontroller belongs to the Series 4 AVR8 USB controller
- * (i.e. ATMEGAxxU4) when defined.
- */
- #define USB_SERIES_4_AVR
-
- /** Indicates that the target AVR microcontroller belongs to the Series 6 AVR8 USB controller
- * (i.e. AT90USBxxx6) when defined.
- */
- #define USB_SERIES_6_AVR
-
- /** Indicates that the target AVR microcontroller belongs to the Series 7 AVR8 USB controller
- * (i.e. AT90USBxxx7) when defined.
- */
- #define USB_SERIES_7_AVR
-
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A0 Series USB controller
- * (i.e. AT32UC3A0*) when defined.
- */
- #define USB_SERIES_UC3A0_AVR
-
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A1 Series USB controller
- * (i.e. AT32UC3A1*) when defined.
- */
- #define USB_SERIES_UC3A1_AVR
-
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A3 Series USB controller
- * (i.e. AT32UC3A3*) when defined.
- */
- #define USB_SERIES_UC3A3_AVR
-
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3A4 Series USB controller
- * (i.e. AT32UC3A4*) when defined.
- */
- #define USB_SERIES_UC3A4_AVR
-
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B0 Series USB controller
- * (i.e. AT32UC3B0*) when defined.
- */
- #define USB_SERIES_UC3B0_AVR
-
- /** Indicates that the target AVR microcontroller belongs to the AVR32 UC3B1 Series USB controller
- * (i.e. AT32UC3B1*) when defined.
- */
- #define USB_SERIES_UC3B1_AVR
-
- /** Indicates that the target AVR microcontroller belongs to the XMEGA A1U Series USB controller
- * (i.e. ATXMEGA*A1U) when defined.
- */
- #define USB_SERIES_A1U_XMEGA
-
- /** Indicates that the target AVR microcontroller belongs to the XMEGA A3U Series USB controller
- * (i.e. ATXMEGA*A3U) when defined.
- */
- #define USB_SERIES_A3U_XMEGA
-
- /** Indicates that the target AVR microcontroller belongs to the XMEGA A4U Series USB controller
- * (i.e. ATXMEGA*A4U) when defined.
- */
- #define USB_SERIES_A4U_XMEGA
-
- /** Indicates that the target AVR microcontroller belongs to the XMEGA B1 Series USB controller
- * (i.e. ATXMEGA*B1) when defined.
- */
- #define USB_SERIES_B1_XMEGA
-
- /** Indicates that the target AVR microcontroller belongs to the XMEGA B3 Series USB controller
- * (i.e. ATXMEGA*B3) when defined.
- */
- #define USB_SERIES_B3_XMEGA
-
- /** Indicates that the target AVR microcontroller belongs to the XMEGA C3 Series USB controller
- * (i.e. ATXMEGA*C3) when defined.
- */
- #define USB_SERIES_C3_XMEGA
-
- /** Indicates that the target AVR microcontroller belongs to the XMEGA C4 Series USB controller
- * (i.e. ATXMEGA*C4) when defined.
- */
- #define USB_SERIES_C4_XMEGA
-
- /** Indicates that the target microcontroller and compilation settings allow for the
- * target to be configured in USB Device mode when defined.
- */
- #define USB_CAN_BE_DEVICE
-
- /** Indicates that the target microcontroller and compilation settings allow for the
- * target to be configured in USB Host mode when defined.
- */
- #define USB_CAN_BE_HOST
-
- /** Indicates that the target microcontroller and compilation settings allow for the
- * target to be configured in either USB Device or Host mode when defined.
- */
- #define USB_CAN_BE_BOTH
- #else
- /* Macros: */
- #if (defined(__AVR_AT90USB162__) || defined(__AVR_AT90USB82__) || \
- defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__))
- #define USB_SERIES_2_AVR
- #define USB_CAN_BE_DEVICE
- #elif (defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega16U4__))
- #define USB_SERIES_4_AVR
- #define USB_CAN_BE_DEVICE
- #elif (defined(__AVR_ATmega32U6__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
- #define USB_SERIES_6_AVR
- #define USB_CAN_BE_DEVICE
- #elif (defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1287__))
- #define USB_SERIES_7_AVR
- #define USB_CAN_BE_DEVICE
- #define USB_CAN_BE_HOST
- #elif (defined(__AVR32_UC3A0512__) || defined(__AVR32_UC3A0256__) || \
- defined(__AVR32_UC3A0128__) || defined(__AVR32_UC3A064__))
- #define USB_SERIES_UC3A0_AVR32
- #define USB_CAN_BE_DEVICE
- #define USB_CAN_BE_HOST
- #elif (defined(__AVR32_UC3A1512__) || defined(__AVR32_UC3A1256__) || \
- defined(__AVR32_UC3A1128__) || defined(__AVR32_UC3A164__))
- #define USB_SERIES_UC3A1_AVR32
- #define USB_CAN_BE_DEVICE
- #define USB_CAN_BE_HOST
- #elif (defined(__AVR32_UC3A3256__) || defined(__AVR32_UC3A3256S__) || \
- defined(__AVR32_UC3A3128__) || defined(__AVR32_UC3A3128S__) || \
- defined(__AVR32_UC3A364__) || defined(__AVR32_UC3A364S__))
- #define USB_SERIES_UC3A3_AVR32
- #define USB_CAN_BE_DEVICE
- #define USB_CAN_BE_HOST
- #elif (defined(__AVR32_UC3A4256__) || defined(__AVR32_UC3A4256S__) || \
- defined(__AVR32_UC3A4128__) || defined(__AVR32_UC3A4128S__) || \
- defined(__AVR32_UC3A464__) || defined(__AVR32_UC3A464S__))
- #define USB_SERIES_UC3A4_AVR32
- #define USB_CAN_BE_DEVICE
- #define USB_CAN_BE_HOST
- #elif (defined(__AVR32_UC3B0512__) || defined(__AVR32_UC3B0256__) || \
- defined(__AVR32_UC3B0128__) || defined(__AVR32_UC3B064__))
- #define USB_SERIES_UC3B0_AVR32
- #define USB_CAN_BE_DEVICE
- #define USB_CAN_BE_HOST
- #elif (defined(__AVR32_UC3B1512__) || defined(__AVR32_UC3B1256__) || \
- defined(__AVR32_UC3B1128__) || defined(__AVR32_UC3B164__))
- #define USB_SERIES_UC3B1_AVR32
- #define USB_CAN_BE_DEVICE
- #define USB_CAN_BE_HOST
- #elif (defined(__AVR_ATxmega128A1U__) || defined(__AVR_ATxmega64A1U__))
- #define USB_SERIES_A1U_XMEGA
- #define USB_CAN_BE_DEVICE
- #elif (defined(__AVR_ATxmega64A3U__) || defined(__AVR_ATxmega128A3U__) || \
- defined(__AVR_ATxmega192A3U__) || defined(__AVR_ATxmega256A3U__))
- #define USB_SERIES_A3U_XMEGA
- #define USB_CAN_BE_DEVICE
- #elif (defined(__AVR_ATxmega256A3BU__))
- #define USB_SERIES_A3BU_XMEGA
- #define USB_CAN_BE_DEVICE
- #elif (defined(__AVR_ATxmega16A4U__) || defined(__AVR_ATxmega32A4U__) || \
- defined(__AVR_ATxmega64A4U__) || defined(__AVR_ATxmega128A4U__))
- #define USB_SERIES_A4U_XMEGA
- #define USB_CAN_BE_DEVICE
- #elif (defined(__AVR_ATxmega128B1__) || defined(__AVR_ATxmega64B1__))
- #define USB_SERIES_B1_XMEGA
- #define USB_CAN_BE_DEVICE
- #elif (defined(__AVR_ATxmega128B3__) || defined(__AVR_ATxmega64B3__))
- #define USB_SERIES_B3_XMEGA
- #define USB_CAN_BE_DEVICE
- #elif (defined(__AVR_ATxmega128C3__) || defined(__AVR_ATxmega64C3__) || \
- defined(__AVR_ATxmega192C3__) || defined(__AVR_ATxmega256C3__) || \
- defined(__AVR_ATxmega384C3__))
- #define USB_SERIES_C3_XMEGA
- #define USB_CAN_BE_DEVICE
- #elif (defined(__AVR_ATxmega16C4__) || defined(__AVR_ATxmega32C4__))
- #define USB_SERIES_C4_XMEGA
- #define USB_CAN_BE_DEVICE
- #endif
-
- #if (defined(USB_CAN_BE_DEVICE) && defined(USB_CAN_BE_HOST))
- #define USB_CAN_BE_BOTH
- #endif
-
- #if defined(USB_HOST_ONLY)
- #if !defined(USB_CAN_BE_HOST)
- #error USB_HOST_ONLY is not available for the currently selected microcontroller model.
- #else
- #undef USB_CAN_BE_DEVICE
- #undef USB_CAN_BE_BOTH
- #endif
- #endif
-
- #if defined(USB_DEVICE_ONLY)
- #if !defined(USB_CAN_BE_DEVICE)
- #error USB_DEVICE_ONLY is not available for the currently selected microcontroller model.
- #else
- #undef USB_CAN_BE_HOST
- #undef USB_CAN_BE_BOTH
- #endif
- #endif
-
- #if (defined(USB_HOST_ONLY) && defined(USB_DEVICE_ONLY))
- #error USB_HOST_ONLY and USB_DEVICE_ONLY are mutually exclusive.
- #endif
-
- #if (!defined(USB_CAN_BE_DEVICE) && !defined(USB_CAN_BE_HOST))
- #error The currently selected device or architecture is not supported under the USB component of the library.
- #endif
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBTask.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBTask.c deleted file mode 100644 index e0a99150a..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBTask.c +++ /dev/null @@ -1,91 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USBTASK_C
-#define __INCLUDE_FROM_USB_DRIVER
-#include "USBTask.h"
-
-volatile bool USB_IsInitialized;
-USB_Request_Header_t USB_ControlRequest;
-
-#if defined(USB_CAN_BE_HOST) && !defined(HOST_STATE_AS_GPIOR)
-volatile uint8_t USB_HostState;
-#endif
-
-#if defined(USB_CAN_BE_DEVICE) && !defined(DEVICE_STATE_AS_GPIOR)
-volatile uint8_t USB_DeviceState;
-#endif
-
-void USB_USBTask(void)
-{
- #if defined(USB_HOST_ONLY)
- USB_HostTask();
- #elif defined(USB_DEVICE_ONLY)
- USB_DeviceTask();
- #else
- if (USB_CurrentMode == USB_MODE_Device)
- USB_DeviceTask();
- #if defined(USB_CAN_BE_HOST)
- else if (USB_CurrentMode == USB_MODE_Host)
- USB_HostTask();
- #endif
- #endif
-}
-
-#if defined(USB_CAN_BE_DEVICE)
-static void USB_DeviceTask(void)
-{
- if (USB_DeviceState != DEVICE_STATE_Unattached)
- {
- uint8_t PrevEndpoint = Endpoint_GetCurrentEndpoint();
-
- Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);
-
- if (Endpoint_IsSETUPReceived())
- USB_Device_ProcessControlRequest();
-
- Endpoint_SelectEndpoint(PrevEndpoint);
- }
-}
-#endif
-
-#if defined(USB_CAN_BE_HOST)
-static void USB_HostTask(void)
-{
- uint8_t PrevPipe = Pipe_GetCurrentPipe();
-
- Pipe_SelectPipe(PIPE_CONTROLPIPE);
-
- USB_Host_ProcessNextHostState();
-
- Pipe_SelectPipe(PrevPipe);
-}
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBTask.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBTask.h deleted file mode 100644 index 531fa6dca..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/USBTask.h +++ /dev/null @@ -1,204 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Main USB service task management.
- *
- * This file contains the function definitions required for the main USB service task, which must be called
- * from the user application to ensure that the USB connection to or from a connected USB device is maintained.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-#ifndef __USBTASK_H__
-#define __USBTASK_H__
-
- /* Includes: */
- #include "../../../Common/Common.h"
- #include "USBMode.h"
- #include "USBController.h"
- #include "Events.h"
- #include "StdRequestType.h"
- #include "StdDescriptors.h"
-
- #if defined(USB_CAN_BE_DEVICE)
- #include "DeviceStandardReq.h"
- #endif
-
- #if defined(USB_CAN_BE_HOST)
- #include "HostStandardReq.h"
- #endif
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Global Variables: */
- /** Indicates if the USB interface is currently initialized but not necessarily connected to a host
- * or device (i.e. if \ref USB_Init() has been run). If this is false, all other library globals related
- * to the USB driver are invalid.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- *
- * \ingroup Group_USBManagement
- */
- extern volatile bool USB_IsInitialized;
-
- /** Structure containing the last received Control request when in Device mode (for use in user-applications
- * inside of the \ref EVENT_USB_Device_ControlRequest() event, or for filling up with a control request to
- * issue when in Host mode before calling \ref USB_Host_SendControlRequest().
- *
- * \note The contents of this structure is automatically endian-corrected for the current CPU architecture.
- *
- * \ingroup Group_USBManagement
- */
- extern USB_Request_Header_t USB_ControlRequest;
-
- #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)
- #if !defined(HOST_STATE_AS_GPIOR) || defined(__DOXYGEN__)
- /** Indicates the current host state machine state. When in host mode, this indicates the state
- * via one of the values of the \ref USB_Host_States_t enum values.
- *
- * This value should not be altered by the user application as it is handled automatically by the
- * library.
- *
- * To reduce program size and speed up checks of this global on the AVR8 architecture, it can be
- * placed into one of the AVR's \c GPIOR hardware registers instead of RAM by defining the
- * \c HOST_STATE_AS_GPIOR token to a value between 0 and 2 in the project makefile and passing it to
- * the compiler via the -D switch. When defined, the corresponding GPIOR register should not be used
- * in the user application except implicitly via the library APIs.
- *
- * \note This global is only present if the user application can be a USB host.
- *
- * \see \ref USB_Host_States_t for a list of possible device states.
- *
- * \ingroup Group_Host
- */
- extern volatile uint8_t USB_HostState;
- #else
- #define _GET_HOST_GPIOR_NAME2(y) GPIOR ## y
- #define _GET_HOST_GPIOR_NAME(x) _GET_HOST_GPIOR_NAME2(x)
- #define USB_HostState _GET_HOST_GPIOR_NAME(HOST_STATE_AS_GPIOR)
- #endif
- #endif
-
- #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)
- #if !defined(DEVICE_STATE_AS_GPIOR) || defined(__DOXYGEN__)
- /** Indicates the current device state machine state. When in device mode, this indicates the state
- * via one of the values of the \ref USB_Device_States_t enum values.
- *
- * This value should not be altered by the user application as it is handled automatically by the
- * library. The only exception to this rule is if the NO_LIMITED_CONTROLLER_CONNECT token is used
- * (see \ref EVENT_USB_Device_Connect() and \ref EVENT_USB_Device_Disconnect() events).
- *
- * To reduce program size and speed up checks of this global on the AVR8 architecture, it can be
- * placed into one of the AVR's \c GPIOR hardware registers instead of RAM by defining the
- * \c DEVICE_STATE_AS_GPIOR token to a value between 0 and 2 in the project makefile and passing it to
- * the compiler via the -D switch. When defined, the corresponding GPIOR register should not be used
- * in the user application except implicitly via the library APIs.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value except in the circumstances outlined above.
- *
- * \note This global is only present if the user application can be a USB device.
- * \n\n
- *
- * \see \ref USB_Device_States_t for a list of possible device states.
- *
- * \ingroup Group_Device
- */
- extern volatile uint8_t USB_DeviceState;
- #else
- #define _GET_DEVICE_GPIOR_NAME2(y) GPIOR ## y
- #define _GET_DEVICE_GPIOR_NAME(x) _GET_DEVICE_GPIOR_NAME2(x)
- #define USB_DeviceState _GET_DEVICE_GPIOR_NAME(DEVICE_STATE_AS_GPIOR)
- #endif
- #endif
-
- /* Function Prototypes: */
- /** This is the main USB management task. The USB driver requires this task to be executed
- * continuously when the USB system is active (device attached in host mode, or attached to a host
- * in device mode) in order to manage USB communications. This task may be executed inside an RTOS,
- * fast timer ISR or the main user application loop.
- *
- * The USB task must be serviced within 30ms while in device mode, or within 1ms while in host mode.
- * The task may be serviced at all times, or (for minimum CPU consumption):
- *
- * - In device mode, it may be disabled at start-up, enabled on the firing of the \ref EVENT_USB_Device_Connect()
- * event and disabled again on the firing of the \ref EVENT_USB_Device_Disconnect() event.
- *
- * - In host mode, it may be disabled at start-up, enabled on the firing of the \ref EVENT_USB_Host_DeviceAttached()
- * event and disabled again on the firing of the \ref EVENT_USB_Host_DeviceEnumerationComplete() or
- * \ref EVENT_USB_Host_DeviceEnumerationFailed() events.
- *
- * If in device mode (only), the control endpoint can instead be managed via interrupts entirely by the library
- * by defining the INTERRUPT_CONTROL_ENDPOINT token and passing it to the compiler via the -D switch.
- *
- * \see \ref Group_Events for more information on the USB events.
- *
- * \ingroup Group_USBManagement
- */
- void USB_USBTask(void);
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_USBTASK_C)
- #if defined(USB_CAN_BE_HOST)
- static void USB_HostTask(void);
- #endif
-
- #if defined(USB_CAN_BE_DEVICE)
- static void USB_DeviceTask(void);
- #endif
- #endif
-
- /* Macros: */
- #define HOST_TASK_NONBLOCK_WAIT(Duration, NextState) MACROS{ USB_HostState = HOST_STATE_WaitForDevice; \
- WaitMSRemaining = (Duration); \
- PostWaitState = (NextState); }MACROE
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c deleted file mode 100644 index 47c345900..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.c +++ /dev/null @@ -1,49 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_XMEGA)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#include "../Device.h"
-
-void USB_Device_SendRemoteWakeup(void)
-{
- USB.CTRLB |= USB_RWAKEUP_bm;
-}
-
-#endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h deleted file mode 100644 index aec693a3c..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Device_XMEGA.h +++ /dev/null @@ -1,258 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Device definitions for the AVR XMEGA microcontrollers.
- * \copydetails Group_Device_XMEGA
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_Device
- * \defgroup Group_Device_XMEGA Device Management (XMEGA)
- * \brief USB Device definitions for the AVR XMEGA microcontrollers.
- *
- * Architecture specific USB Device definitions for the Atmel AVR XMEGA microcontrollers.
- *
- * @{
- */
-
-#ifndef __USBDEVICE_XMEGA_H__
-#define __USBDEVICE_XMEGA_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBController.h"
- #include "../StdDescriptors.h"
- #include "../USBInterrupt.h"
- #include "../Endpoint.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- #if (defined(USE_RAM_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS))
- #error USE_RAM_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive.
- #endif
-
- #if (defined(USE_FLASH_DESCRIPTORS) && defined(USE_EEPROM_DESCRIPTORS))
- #error USE_FLASH_DESCRIPTORS and USE_EEPROM_DESCRIPTORS are mutually exclusive.
- #endif
-
- #if (defined(USE_FLASH_DESCRIPTORS) && defined(USE_RAM_DESCRIPTORS))
- #error USE_FLASH_DESCRIPTORS and USE_RAM_DESCRIPTORS are mutually exclusive.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name USB Device Mode Option Masks */
- //@{
- /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
- * USB interface should be initialized in low speed (1.5Mb/s) mode.
- *
- * \note Low Speed mode is not available on all USB AVR models.
- * \n
- *
- * \note Restrictions apply on the number, size and type of endpoints which can be used
- * when running in low speed mode - refer to the USB 2.0 specification.
- */
- #define USB_DEVICE_OPT_LOWSPEED (1 << 0)
-
- #if (F_USB > 6000000)
- /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
- * USB interface should be initialized in full speed (12Mb/s) mode.
- */
- #define USB_DEVICE_OPT_FULLSPEED (0 << 0)
- #endif
- //@}
-
- #if (!defined(NO_INTERNAL_SERIAL) || defined(__DOXYGEN__))
- /** String descriptor index for the device's unique serial number string descriptor within the device.
- * This unique serial number is used by the host to associate resources to the device (such as drivers or COM port
- * number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain
- * a unique serial number internally, and setting the device descriptors serial number string index to this value
- * will cause it to use the internal serial number.
- *
- * On unsupported devices, this will evaluate to \ref NO_DESCRIPTOR and so will force the host to create a pseudo-serial
- * number for the device.
- */
- #define USE_INTERNAL_SERIAL 0xDC
-
- /** Length of the device's unique internal serial number, in bits, if present on the selected microcontroller
- * model.
- */
- #define INTERNAL_SERIAL_LENGTH_BITS (8 * (1 + (offsetof(NVM_PROD_SIGNATURES_t, COORDY1) - offsetof(NVM_PROD_SIGNATURES_t, LOTNUM0))))
-
- /** Start address of the internal serial number, in the appropriate address space, if present on the selected microcontroller
- * model.
- */
- #define INTERNAL_SERIAL_START_ADDRESS offsetof(NVM_PROD_SIGNATURES_t, LOTNUM0)
- #else
- #define USE_INTERNAL_SERIAL NO_DESCRIPTOR
-
- #define INTERNAL_SERIAL_LENGTH_BITS 0
- #define INTERNAL_SERIAL_START_ADDRESS 0
- #endif
-
- /* Function Prototypes: */
- /** Sends a Remote Wakeup request to the host. This signals to the host that the device should
- * be taken out of suspended mode, and communications should resume.
- *
- * Typically, this is implemented so that HID devices (mice, keyboards, etc.) can wake up the
- * host computer when the host has suspended all USB devices to enter a low power state.
- *
- * \note This function should only be used if the device has indicated to the host that it
- * supports the Remote Wakeup feature in the device descriptors, and should only be
- * issued if the host is currently allowing remote wakeup events from the device (i.e.,
- * the \ref USB_Device_RemoteWakeupEnabled flag is set). When the \c NO_DEVICE_REMOTE_WAKEUP
- * compile time option is used, this function is unavailable.
- * \n\n
- *
- * \note The USB clock must be running for this function to operate. If the stack is initialized with
- * the \ref USB_OPT_MANUAL_PLL option enabled, the user must ensure that the PLL is running
- * before attempting to call this function.
- *
- * \see \ref Group_StdDescriptors for more information on the RMWAKEUP feature and device descriptors.
- */
- void USB_Device_SendRemoteWakeup(void);
-
- /* Inline Functions: */
- /** Returns the current USB frame number, when in device mode. Every millisecond the USB bus is active (i.e. enumerated to a host)
- * the frame number is incremented by one.
- *
- * \return Current USB frame number from the USB controller.
- */
- static inline uint16_t USB_Device_GetFrameNumber(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline uint16_t USB_Device_GetFrameNumber(void)
- {
- return ((USB_EndpointTable_t*)USB.EPPTR)->FrameNum;
- }
-
- #if !defined(NO_SOF_EVENTS)
- /** Enables the device mode Start Of Frame events. When enabled, this causes the
- * \ref EVENT_USB_Device_StartOfFrame() event to fire once per millisecond, synchronized to the USB bus,
- * at the start of each USB frame when enumerated in device mode.
- *
- * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
- */
- static inline void USB_Device_EnableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_EnableSOFEvents(void)
- {
- USB.INTCTRLA |= USB_SOFIE_bm;
- }
-
- /** Disables the device mode Start Of Frame events. When disabled, this stops the firing of the
- * \ref EVENT_USB_Device_StartOfFrame() event when enumerated in device mode.
- *
- * \note This function is not available when the \c NO_SOF_EVENTS compile time token is defined.
- */
- static inline void USB_Device_DisableSOFEvents(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_DisableSOFEvents(void)
- {
- USB.INTCTRLA &= ~USB_SOFIE_bm;
- }
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Inline Functions: */
- static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_SetLowSpeed(void)
- {
- USB.CTRLA &= ~USB_SPEED_bm;
- }
-
- static inline void USB_Device_SetFullSpeed(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_SetFullSpeed(void)
- {
- USB.CTRLA |= USB_SPEED_bm;
- }
-
- static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void USB_Device_SetDeviceAddress(const uint8_t Address)
- {
- USB.ADDR = Address;
- }
-
- static inline bool USB_Device_IsAddressSet(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline bool USB_Device_IsAddressSet(void)
- {
- return ((USB.ADDR != 0) ? true : false);
- }
-
- static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) ATTR_NON_NULL_PTR_ARG(1);
- static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString)
- {
- uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
- GlobalInterruptDisable();
-
- uint8_t SigReadAddress = INTERNAL_SERIAL_START_ADDRESS;
-
- for (uint8_t SerialCharNum = 0; SerialCharNum < (INTERNAL_SERIAL_LENGTH_BITS / 4); SerialCharNum++)
- {
- uint8_t SerialByte;
-
- NVM.CMD = NVM_CMD_READ_CALIB_ROW_gc;
- SerialByte = pgm_read_byte(SigReadAddress);
- NVM.CMD = 0;
-
- if (SerialCharNum & 0x01)
- {
- SerialByte >>= 4;
- SigReadAddress++;
- }
-
- SerialByte &= 0x0F;
-
- UnicodeString[SerialCharNum] = cpu_to_le16((SerialByte >= 10) ?
- (('A' - 10) + SerialByte) : ('0' + SerialByte));
- }
-
- SetGlobalInterruptMask(CurrentGlobalInt);
- }
-
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c deleted file mode 100644 index 0a1a77505..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.c +++ /dev/null @@ -1,275 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_XMEGA)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#include "EndpointStream_XMEGA.h"
-
-#if !defined(CONTROL_ONLY_DEVICE)
-uint8_t Endpoint_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t ErrorCode;
- uint16_t BytesInTransfer = 0;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- Length -= *BytesProcessed;
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearOUT();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return ENDPOINT_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Endpoint_Discard_8();
-
- Length--;
- BytesInTransfer++;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-uint8_t Endpoint_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t ErrorCode;
- uint16_t BytesInTransfer = 0;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- Length -= *BytesProcessed;
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearIN();
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return ENDPOINT_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Endpoint_Write_8(0);
-
- Length--;
- BytesInTransfer++;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-/* The following abuses the C preprocessor in order to copy-paste common code with slight alterations,
- * so that the code needs to be written once. It is a crude form of templating to reduce code maintenance. */
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE
-#define TEMPLATE_BUFFER_TYPE const void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_RW.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE
-#define TEMPLATE_BUFFER_TYPE void*
-#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_RW.c"
-
-#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE)
- #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-#endif
-
-#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE)
- #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE
- #define TEMPLATE_BUFFER_TYPE const void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE
- #define TEMPLATE_BUFFER_TYPE void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8())
- #include "Template/Template_Endpoint_RW.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE
- #define TEMPLATE_BUFFER_TYPE void*
- #define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8())
- #include "Template/Template_Endpoint_RW.c"
-#endif
-
-#endif
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_Control_W.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(*BufferPtr)
-#include "Template/Template_Endpoint_Control_W.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE
-#define TEMPLATE_BUFFER_OFFSET(Length) 0
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_Control_R.c"
-
-#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE
-#define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
-#define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
-#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *BufferPtr = Endpoint_Read_8()
-#include "Template/Template_Endpoint_Control_R.c"
-
-#if defined(ARCH_HAS_FLASH_ADDRESS_SPACE)
- #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_Control_W.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(pgm_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_Control_W.c"
-#endif
-
-#if defined(ARCH_HAS_EEPROM_ADDRESS_SPACE)
- #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_Control_W.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_8(eeprom_read_byte(BufferPtr))
- #include "Template/Template_Endpoint_Control_W.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE
- #define TEMPLATE_BUFFER_OFFSET(Length) 0
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr += Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8())
- #include "Template/Template_Endpoint_Control_R.c"
-
- #define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE
- #define TEMPLATE_BUFFER_OFFSET(Length) (Length - 1)
- #define TEMPLATE_BUFFER_MOVE(BufferPtr, Amount) BufferPtr -= Amount
- #define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_update_byte(BufferPtr, Endpoint_Read_8())
- #include "Template/Template_Endpoint_Control_R.c"
-#endif
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h deleted file mode 100644 index 4d2a9f573..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/EndpointStream_XMEGA.h +++ /dev/null @@ -1,648 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Endpoint data stream transmission and reception management for the AVR XMEGA microcontrollers.
- * \copydetails Group_EndpointStreamRW_XMEGA
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_EndpointStreamRW
- * \defgroup Group_EndpointStreamRW_XMEGA Read/Write of Multi-Byte Streams (XMEGA)
- * \brief Endpoint data stream transmission and reception management for the Atmel AVR XMEGA architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of data streams from
- * and to endpoints.
- *
- * @{
- */
-
-#ifndef __ENDPOINT_STREAM_XMEGA_H__
-#define __ENDPOINT_STREAM_XMEGA_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBMode.h"
- #include "../USBTask.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Function Prototypes: */
- /** \name Stream functions for null data */
- //@{
-
- /** Reads and discards the given number of bytes from the currently selected endpoint's bank,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes empty while there is still data to process (and after the current
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number
- * of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Discard_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Discard_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Length Number of bytes to discard via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Discard_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- /** Writes a given number of zeroed bytes to the currently selected endpoint's bank, sending
- * full packets to the host as needed. The last packet is not automatically sent once the
- * remaining bytes have been written; the user is responsible for manually sending the last
- * packet to the host via the \ref Endpoint_ClearIN() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes full while there is still data to process (and after the current
- * packet transmission has been initiated) the BytesProcessed location will be updated with the
- * total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Null_Stream(512, NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Null_Stream(512, &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Length Number of zero bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Null_Stream(uint16_t Length,
- uint16_t* const BytesProcessed);
-
- //@}
-
- /** \name Stream functions for RAM source/destination data */
- //@{
-
- /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
- * sending full packets to the host as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Endpoint_ClearIN() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes full while there is still data to process (and after the current
- * packet transmission has been initiated) the BytesProcessed location will be updated with the
- * total number of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Write_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Stream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the endpoint from the given buffer in big endian,
- * sending full packets to the host as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Endpoint_ClearIN() macro.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Stream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the endpoint from the given buffer in little endian,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * If the BytesProcessed parameter is \c NULL, the entire stream transfer is attempted at once,
- * failing or succeeding as a single unit. If the BytesProcessed parameter points to a valid
- * storage location, the transfer will instead be performed as a series of chunks. Each time
- * the endpoint bank becomes empty while there is still data to process (and after the current
- * packet has been acknowledged) the BytesProcessed location will be updated with the total number
- * of bytes processed in the stream, and the function will exit with an error code of
- * \ref ENDPOINT_RWSTREAM_IncompleteTransfer. This allows for any abort checking to be performed
- * in the user code - to continue the transfer, call the function again with identical parameters
- * and it will resume until the BytesProcessed value reaches the total transfer length.
- *
- * <b>Single Stream Transfer Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- *
- * if ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream),
- * NULL)) != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * <b>Partial Stream Transfers Example:</b>
- * \code
- * uint8_t DataStream[512];
- * uint8_t ErrorCode;
- * uint16_t BytesProcessed;
- *
- * BytesProcessed = 0;
- * while ((ErrorCode = Endpoint_Read_Stream_LE(DataStream, sizeof(DataStream),
- * &BytesProcessed)) == ENDPOINT_RWSTREAM_IncompleteTransfer)
- * {
- * // Stream not yet complete - do other actions here, abort if required
- * }
- *
- * if (ErrorCode != ENDPOINT_RWSTREAM_NoError)
- * {
- * // Stream failed to complete - check ErrorCode here
- * }
- * \endcode
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Stream_LE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the endpoint from the given buffer in big endian,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Stream_BE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
- * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the status OUT packet
- * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_Stream_LE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
- * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the status OUT packet
- * to finalize the transfer's status stage via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_Stream_BE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
- * discarding fully read packets from the host as needed. The device IN acknowledgement is not
- * automatically sent after success or failure states; the user is responsible for manually sending the
- * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_Stream_LE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
- * discarding fully read packets from the host as needed. The device IN acknowledgement is not
- * automatically sent after success or failure states; the user is responsible for manually sending the
- * status IN packet to finalize the transfer's status stage via the \ref Endpoint_ClearIN() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_Stream_BE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /** \name Stream functions for EEPROM source/destination data */
- //@{
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_EStream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE().
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_EStream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_LE().
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_EStream_LE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_BE().
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be read at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_EStream_BE(void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_EStream_LE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_EStream_BE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_EStream_LE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_EStream_BE(void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /** \name Stream functions for PROGMEM source/destination data */
- //@{
-
- /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_PStream_LE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] BytesProcessed Pointer to a location where the total number of bytes processed in the current
- * transaction should be updated, \c NULL if the entire stream should be written at once.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_PStream_BE(const void* const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_PStream_LE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- * \n\n
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_PStream_BE(const void* const Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
- //@}
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c deleted file mode 100644 index b105e18c3..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c +++ /dev/null @@ -1,168 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_XMEGA)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_DEVICE)
-
-#include "../Endpoint.h"
-
-#if !defined(FIXED_CONTROL_ENDPOINT_SIZE)
-uint8_t USB_Device_ControlEndpointSize = ENDPOINT_CONTROLEP_DEFAULT_SIZE;
-#endif
-
-Endpoint_FIFOPair_t USB_Endpoint_FIFOs[ENDPOINT_TOTAL_ENDPOINTS];
-
-volatile uint8_t USB_Endpoint_SelectedEndpoint;
-volatile USB_EP_t* USB_Endpoint_SelectedHandle;
-volatile Endpoint_FIFO_t* USB_Endpoint_SelectedFIFO;
-
-bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table,
- const uint8_t Entries)
-{
- for (uint8_t i = 0; i < Entries; i++)
- {
- if (!(Table[i].Address))
- continue;
-
- if (!(Endpoint_ConfigureEndpoint(Table[i].Address, Table[i].Type, Table[i].Size, Table[i].Banks)))
- {
- return false;
- }
- }
-
- return true;
-}
-
-bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Address,
- const uint8_t Config,
- const uint8_t Size)
-{
- Endpoint_SelectEndpoint(Address);
-
- USB_Endpoint_SelectedHandle->CTRL = 0;
- USB_Endpoint_SelectedHandle->STATUS = (Address & ENDPOINT_DIR_IN) ? USB_EP_BUSNACK0_bm : 0;
- USB_Endpoint_SelectedHandle->CTRL = Config;
- USB_Endpoint_SelectedHandle->CNT = 0;
- USB_Endpoint_SelectedHandle->DATAPTR = (intptr_t)USB_Endpoint_SelectedFIFO->Data;
-
- USB_Endpoint_SelectedFIFO->Length = (Address & ENDPOINT_DIR_IN) ? Size : 0;
- USB_Endpoint_SelectedFIFO->Position = 0;
-
- return true;
-}
-
-void Endpoint_ClearEndpoints(void)
-{
- for (uint8_t EPNum = 0; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++)
- {
- ((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EPNum].IN.CTRL = 0;
- ((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EPNum].OUT.CTRL = 0;
- }
-}
-
-void Endpoint_ClearStatusStage(void)
-{
- if (USB_ControlRequest.bmRequestType & REQDIR_DEVICETOHOST)
- {
- while (!(Endpoint_IsOUTReceived()))
- {
- if (USB_DeviceState == DEVICE_STATE_Unattached)
- return;
- }
-
- Endpoint_ClearOUT();
- }
- else
- {
- while (!(Endpoint_IsINReady()))
- {
- if (USB_DeviceState == DEVICE_STATE_Unattached)
- return;
- }
-
- Endpoint_ClearIN();
- }
-}
-
-#if !defined(CONTROL_ONLY_DEVICE)
-uint8_t Endpoint_WaitUntilReady(void)
-{
- #if (USB_STREAM_TIMEOUT_MS < 0xFF)
- uint8_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
- #else
- uint16_t TimeoutMSRem = USB_STREAM_TIMEOUT_MS;
- #endif
-
- uint16_t PreviousFrameNumber = USB_Device_GetFrameNumber();
-
- for (;;)
- {
- if (Endpoint_GetEndpointDirection() == ENDPOINT_DIR_IN)
- {
- if (Endpoint_IsINReady())
- return ENDPOINT_READYWAIT_NoError;
- }
- else
- {
- if (Endpoint_IsOUTReceived())
- return ENDPOINT_READYWAIT_NoError;
- }
-
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_READYWAIT_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_READYWAIT_BusSuspended;
- else if (Endpoint_IsStalled())
- return ENDPOINT_READYWAIT_EndpointStalled;
-
- uint16_t CurrentFrameNumber = USB_Device_GetFrameNumber();
-
- if (CurrentFrameNumber != PreviousFrameNumber)
- {
- PreviousFrameNumber = CurrentFrameNumber;
-
- if (!(TimeoutMSRem--))
- return ENDPOINT_READYWAIT_Timeout;
- }
- }
-}
-#endif
-
-#endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h deleted file mode 100644 index a4118889b..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.h +++ /dev/null @@ -1,777 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Endpoint definitions for the AVR XMEGA microcontrollers.
- * \copydetails Group_EndpointManagement_XMEGA
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_EndpointRW
- * \defgroup Group_EndpointRW_XMEGA Endpoint Data Reading and Writing (XMEGA)
- * \brief Endpoint data read/write definitions for the Atmel AVR XMEGA architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints.
- */
-
-/** \ingroup Group_EndpointPrimitiveRW
- * \defgroup Group_EndpointPrimitiveRW_XMEGA Read/Write of Primitive Data Types (XMEGA)
- * \brief Endpoint primitive read/write definitions for the Atmel AVR XMEGA architecture.
- *
- * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
- * from and to endpoints.
- */
-
-/** \ingroup Group_EndpointPacketManagement
- * \defgroup Group_EndpointPacketManagement_XMEGA Endpoint Packet Management (XMEGA)
- * \brief Endpoint packet management definitions for the Atmel AVR XMEGA architecture.
- *
- * Functions, macros, variables, enums and types related to packet management of endpoints.
- */
-
-/** \ingroup Group_EndpointManagement
- * \defgroup Group_EndpointManagement_XMEGA Endpoint Management (XMEGA)
- * \brief Endpoint management definitions for the Atmel AVR XMEGA architecture.
- *
- * Functions, macros and enums related to endpoint management when in USB Device mode. This
- * module contains the endpoint management macros, as well as endpoint interrupt and data
- * send/receive functions for various data types.
- *
- * @{
- */
-
-#ifndef __ENDPOINT_XMEGA_H__
-#define __ENDPOINT_XMEGA_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBTask.h"
- #include "../USBInterrupt.h"
- #include "../USBController.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if (!defined(MAX_ENDPOINT_INDEX) && !defined(CONTROL_ONLY_DEVICE)) || defined(__DOXYGEN__)
- /** Total number of endpoints (including the default control endpoint at address 0) which may
- * be used in the device. Different USB AVR models support different amounts of endpoints,
- * this value reflects the maximum number of endpoints for the currently selected AVR model.
- */
- #define ENDPOINT_TOTAL_ENDPOINTS 16
- #else
- #if defined(CONTROL_ONLY_DEVICE)
- #define ENDPOINT_TOTAL_ENDPOINTS 1
- #else
- #define ENDPOINT_TOTAL_ENDPOINTS (MAX_ENDPOINT_INDEX + 1)
- #endif
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Type Defines: */
- typedef struct
- {
- uint8_t Data[64];
-
- uint8_t Length;
- uint8_t Position;
- } Endpoint_FIFO_t;
-
- typedef struct
- {
- Endpoint_FIFO_t OUT;
- Endpoint_FIFO_t IN;
- } Endpoint_FIFOPair_t;
-
- /* External Variables: */
- extern Endpoint_FIFOPair_t USB_Endpoint_FIFOs[ENDPOINT_TOTAL_ENDPOINTS];
- extern volatile uint8_t USB_Endpoint_SelectedEndpoint;
- extern volatile USB_EP_t* USB_Endpoint_SelectedHandle;
- extern volatile Endpoint_FIFO_t* USB_Endpoint_SelectedFIFO;
-
- /* Inline Functions: */
- static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST
- ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes)
- {
- uint8_t MaskVal = 0;
- uint16_t CheckBytes = 8;
-
- while (CheckBytes < Bytes)
- {
- MaskVal++;
- CheckBytes <<= 1;
- }
-
- return (MaskVal << USB_EP_BUFSIZE_gp);
- }
-
- /* Function Prototypes: */
- bool Endpoint_ConfigureEndpoint_PRV(const uint8_t Address,
- const uint8_t Config,
- const uint8_t Size);
- void Endpoint_ClearEndpoints(void);
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
- /** Default size of the default control endpoint's bank, until altered by the control endpoint bank size
- * value in the device descriptor. Not available if the \c FIXED_CONTROL_ENDPOINT_SIZE token is defined.
- */
- #define ENDPOINT_CONTROLEP_DEFAULT_SIZE 8
- #endif
-
- /* Enums: */
- /** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function.
- *
- * \ingroup Group_EndpointRW_XMEGA
- */
- enum Endpoint_WaitUntilReady_ErrorCodes_t
- {
- ENDPOINT_READYWAIT_NoError = 0, /**< Endpoint is ready for next packet, no error. */
- ENDPOINT_READYWAIT_EndpointStalled = 1, /**< The endpoint was stalled during the stream
- * transfer by the host or device.
- */
- ENDPOINT_READYWAIT_DeviceDisconnected = 2, /**< Device was disconnected from the host while
- * waiting for the endpoint to become ready.
- */
- ENDPOINT_READYWAIT_BusSuspended = 3, /**< The USB bus has been suspended by the host and
- * no USB endpoint traffic can occur until the bus
- * has resumed.
- */
- ENDPOINT_READYWAIT_Timeout = 4, /**< The host failed to accept or send the next packet
- * within the software timeout period set by the
- * \ref USB_STREAM_TIMEOUT_MS macro.
- */
- };
-
- /* Inline Functions: */
- /** Selects the given endpoint address.
- *
- * Any endpoint operations which do not require the endpoint address to be indicated will operate on
- * the currently selected endpoint.
- *
- * \param[in] Address Endpoint address to select.
- */
- static inline void Endpoint_SelectEndpoint(const uint8_t Address);
- static inline void Endpoint_SelectEndpoint(const uint8_t Address)
- {
- uint8_t EndpointNumber = (Address & ENDPOINT_EPNUM_MASK);
-
- USB_Endpoint_SelectedEndpoint = Address;
-
- if (Address & ENDPOINT_DIR_IN)
- {
- USB_Endpoint_SelectedFIFO = &USB_Endpoint_FIFOs[EndpointNumber].IN;
- USB_Endpoint_SelectedHandle = &((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EndpointNumber].IN;
- }
- else
- {
- USB_Endpoint_SelectedFIFO = &USB_Endpoint_FIFOs[EndpointNumber].OUT;
- USB_Endpoint_SelectedHandle = &((USB_EndpointTable_t*)USB.EPPTR)->Endpoints[EndpointNumber].OUT;
- }
- }
-
- /** Configures the specified endpoint address with the given endpoint type, direction, bank size
- * and banking mode. Once configured, the endpoint may be read from or written to, depending
- * on its direction.
- *
- * \param[in] Address Endpoint address to configure.
- *
- * \param[in] Type Type of endpoint to configure, a \c EP_TYPE_* mask. Not all endpoint types
- * are available on Low Speed USB devices - refer to the USB 2.0 specification.
- *
- * \param[in] Size Size of the endpoint's bank, where packets are stored before they are transmitted
- * to the USB host, or after they have been received from the USB host (depending on
- * the endpoint's data direction). The bank size must indicate the maximum packet size
- * that the endpoint can handle.
- *
- * \param[in] Banks Number of hardware banks to use for the endpoint being configured.
- *
- * \note The default control endpoint should not be manually configured by the user application, as
- * it is automatically configured by the library internally.
- * \n\n
- *
- * \note This routine will automatically select the specified endpoint.
- *
- * \return Boolean \c true if the configuration succeeded, \c false otherwise.
- */
- static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address,
- const uint8_t Type,
- const uint16_t Size,
- const uint8_t Banks) ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_ConfigureEndpoint(const uint8_t Address,
- const uint8_t Type,
- const uint16_t Size,
- const uint8_t Banks)
- {
- uint8_t EPConfigMask = (USB_EP_INTDSBL_bm | ((Banks > 1) ? USB_EP_PINGPONG_bm : 0) | Endpoint_BytesToEPSizeMask(Size));
-
- if ((Address & ENDPOINT_EPNUM_MASK) >= ENDPOINT_TOTAL_ENDPOINTS)
- return false;
-
- // TODO - Fix once limitations are lifted
- EPConfigMask &= ~USB_EP_PINGPONG_bm;
- if (Size > 64)
- return false;
-
- switch (Type)
- {
- case EP_TYPE_CONTROL:
- EPConfigMask |= USB_EP_TYPE_CONTROL_gc;
- break;
- case EP_TYPE_ISOCHRONOUS:
- EPConfigMask |= USB_EP_TYPE_ISOCHRONOUS_gc;
- break;
- default:
- EPConfigMask |= USB_EP_TYPE_BULK_gc;
- break;
- }
-
- if (Type == EP_TYPE_CONTROL)
- Endpoint_ConfigureEndpoint_PRV(Address ^ ENDPOINT_DIR_IN, EPConfigMask, Size);
-
- return Endpoint_ConfigureEndpoint_PRV(Address, EPConfigMask, Size);
- }
-
- /** Indicates the number of bytes currently stored in the current endpoint's selected bank.
- *
- * \ingroup Group_EndpointRW_XMEGA
- *
- * \return Total number of bytes in the currently selected Endpoint's FIFO buffer.
- */
- static inline uint16_t Endpoint_BytesInEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Endpoint_BytesInEndpoint(void)
- {
- if (USB_Endpoint_SelectedEndpoint & ENDPOINT_DIR_IN)
- return USB_Endpoint_SelectedFIFO->Position;
- else
- return (USB_Endpoint_SelectedFIFO->Length - USB_Endpoint_SelectedFIFO->Position);
- }
-
- /** Get the endpoint address of the currently selected endpoint. This is typically used to save
- * the currently selected endpoint so that it can be restored after another endpoint has been
- * manipulated.
- *
- * \return Index of the currently selected endpoint.
- */
- static inline uint8_t Endpoint_GetCurrentEndpoint(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_GetCurrentEndpoint(void)
- {
- return USB_Endpoint_SelectedEndpoint;
- }
-
- /** Resets the endpoint bank FIFO. This clears all the endpoint banks and resets the USB controller's
- * data In and Out pointers to the bank's contents.
- *
- * \param[in] Address Endpoint address whose FIFO buffers are to be reset.
- */
- static inline void Endpoint_ResetEndpoint(const uint8_t Address) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ResetEndpoint(const uint8_t Address)
- {
- if (Address & ENDPOINT_DIR_IN)
- USB_Endpoint_FIFOs[Address & ENDPOINT_EPNUM_MASK].IN.Position = 0;
- else
- USB_Endpoint_FIFOs[Address & ENDPOINT_EPNUM_MASK].OUT.Position = 0;
- }
-
- /** Determines if the currently selected endpoint is enabled, but not necessarily configured.
- *
- * \return Boolean \c true if the currently selected endpoint is enabled, \c false otherwise.
- */
- static inline bool Endpoint_IsEnabled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsEnabled(void)
- {
- return true;
- }
-
- /** Aborts all pending IN transactions on the currently selected endpoint, once the bank
- * has been queued for transmission to the host via \ref Endpoint_ClearIN(). This function
- * will terminate all queued transactions, resetting the endpoint banks ready for a new
- * packet.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- */
- static inline void Endpoint_AbortPendingIN(void)
- {
- USB_Endpoint_SelectedHandle->STATUS |= USB_EP_BUSNACK0_bm;
- }
-
- /** Determines if the currently selected endpoint may be read from (if data is waiting in the endpoint
- * bank and the endpoint is an OUT direction, or if the bank is not yet full if the endpoint is an IN
- * direction). This function will return false if an error has occurred in the endpoint, if the endpoint
- * is an OUT direction and no packet (or an empty packet) has been received, or if the endpoint is an IN
- * direction and the endpoint bank is full.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- *
- * \return Boolean \c true if the currently selected endpoint may be read from or written to, depending
- * on its direction.
- */
- static inline bool Endpoint_IsReadWriteAllowed(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsReadWriteAllowed(void)
- {
- return (USB_Endpoint_SelectedFIFO->Position < USB_Endpoint_SelectedFIFO->Length);
- }
-
- /** Determines if the currently selected endpoint is configured.
- *
- * \return Boolean \c true if the currently selected endpoint has been configured, \c false otherwise.
- */
- static inline bool Endpoint_IsConfigured(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsConfigured(void)
- {
- return ((USB_Endpoint_SelectedHandle->CTRL & USB_EP_TYPE_gm) ? true : false);
- }
-
- /** Determines if the selected IN endpoint is ready for a new packet to be sent to the host.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- *
- * \return Boolean \c true if the current endpoint is ready for an IN packet, \c false otherwise.
- */
- static inline bool Endpoint_IsINReady(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsINReady(void)
- {
- Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint | ENDPOINT_DIR_IN);
-
- return ((USB_Endpoint_SelectedHandle->STATUS & USB_EP_BUSNACK0_bm) ? true : false);
- }
-
- /** Determines if the selected OUT endpoint has received new packet from the host.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- *
- * \return Boolean \c true if current endpoint is has received an OUT packet, \c false otherwise.
- */
- static inline bool Endpoint_IsOUTReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsOUTReceived(void)
- {
- Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint & ~ENDPOINT_DIR_IN);
-
- if (USB_Endpoint_SelectedHandle->STATUS & USB_EP_TRNCOMPL0_bm)
- {
- USB_Endpoint_SelectedFIFO->Length = USB_Endpoint_SelectedHandle->CNT;
- return true;
- }
-
- return false;
- }
-
- /** Determines if the current CONTROL type endpoint has received a SETUP packet.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- *
- * \return Boolean \c true if the selected endpoint has received a SETUP packet, \c false otherwise.
- */
- static inline bool Endpoint_IsSETUPReceived(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsSETUPReceived(void)
- {
- Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint & ~ENDPOINT_DIR_IN);
-
- if (USB_Endpoint_SelectedHandle->STATUS & USB_EP_SETUP_bm)
- {
- USB_Endpoint_SelectedFIFO->Length = USB_Endpoint_SelectedHandle->CNT;
- return true;
- }
-
- return false;
- }
-
- /** Clears a received SETUP packet on the currently selected CONTROL type endpoint, freeing up the
- * endpoint for the next packet.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- *
- * \note This is not applicable for non CONTROL type endpoints.
- */
- static inline void Endpoint_ClearSETUP(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearSETUP(void)
- {
- Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint & ~ENDPOINT_DIR_IN);
- USB_Endpoint_SelectedHandle->STATUS &= ~(USB_EP_SETUP_bm | USB_EP_TRNCOMPL0_bm | USB_EP_BUSNACK0_bm | USB_EP_OVF_bm);
- USB_Endpoint_SelectedHandle->STATUS |= USB_EP_TOGGLE_bm;
- USB_Endpoint_SelectedFIFO->Position = 0;
-
- Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint | ENDPOINT_DIR_IN);
- USB_Endpoint_SelectedHandle->STATUS |= USB_EP_TOGGLE_bm;
- USB_Endpoint_SelectedFIFO->Position = 0;
- }
-
- /** Sends an IN packet to the host on the currently selected endpoint, freeing up the endpoint for the
- * next packet and switching to the alternative endpoint bank if double banked.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- */
- static inline void Endpoint_ClearIN(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearIN(void)
- {
- USB_Endpoint_SelectedHandle->CNT = USB_Endpoint_SelectedFIFO->Position;
- USB_Endpoint_SelectedHandle->STATUS &= ~(USB_EP_TRNCOMPL0_bm | USB_EP_BUSNACK0_bm | USB_EP_OVF_bm);
- USB_Endpoint_SelectedFIFO->Position = 0;
- }
-
- /** Acknowledges an OUT packet to the host on the currently selected endpoint, freeing up the endpoint
- * for the next packet and switching to the alternative endpoint bank if double banked.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- */
- static inline void Endpoint_ClearOUT(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearOUT(void)
- {
- USB_Endpoint_SelectedHandle->STATUS &= ~(USB_EP_TRNCOMPL0_bm | USB_EP_BUSNACK0_bm | USB_EP_OVF_bm);
- USB_Endpoint_SelectedFIFO->Position = 0;
- }
-
- /** Stalls the current endpoint, indicating to the host that a logical problem occurred with the
- * indicated endpoint and that the current transfer sequence should be aborted. This provides a
- * way for devices to indicate invalid commands to the host so that the current transfer can be
- * aborted and the host can begin its own recovery sequence.
- *
- * The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro
- * is called, or the host issues a CLEAR FEATURE request to the device for the currently selected
- * endpoint.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- */
- static inline void Endpoint_StallTransaction(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_StallTransaction(void)
- {
- USB_Endpoint_SelectedHandle->CTRL |= USB_EP_STALL_bm;
-
- if ((USB_Endpoint_SelectedHandle->CTRL & USB_EP_TYPE_gm) == USB_EP_TYPE_CONTROL_gc)
- {
- Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint ^ ENDPOINT_DIR_IN);
- USB_Endpoint_SelectedHandle->CTRL |= USB_EP_STALL_bm;
- }
- }
-
- /** Clears the STALL condition on the currently selected endpoint.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- */
- static inline void Endpoint_ClearStall(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ClearStall(void)
- {
- USB_Endpoint_SelectedHandle->CTRL &= ~USB_EP_STALL_bm;
- }
-
- /** Determines if the currently selected endpoint is stalled, false otherwise.
- *
- * \ingroup Group_EndpointPacketManagement_XMEGA
- *
- * \return Boolean \c true if the currently selected endpoint is stalled, \c false otherwise.
- */
- static inline bool Endpoint_IsStalled(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline bool Endpoint_IsStalled(void)
- {
- return ((USB_Endpoint_SelectedHandle->CTRL & USB_EP_STALL_bm) ? true : false);
- }
-
- /** Resets the data toggle of the currently selected endpoint. */
- static inline void Endpoint_ResetDataToggle(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_ResetDataToggle(void)
- {
- USB_Endpoint_SelectedHandle->STATUS &= ~USB_EP_TOGGLE_bm;
- }
-
- /** Determines the currently selected endpoint's direction.
- *
- * \return The currently selected endpoint's direction, as a \c ENDPOINT_DIR_* mask.
- */
- static inline uint8_t Endpoint_GetEndpointDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_GetEndpointDirection(void)
- {
- return (USB_Endpoint_SelectedEndpoint & ENDPOINT_DIR_IN);
- }
-
- /** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- *
- * \return Next byte in the currently selected endpoint's FIFO buffer.
- */
- static inline uint8_t Endpoint_Read_8(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint8_t Endpoint_Read_8(void)
- {
- return USB_Endpoint_SelectedFIFO->Data[USB_Endpoint_SelectedFIFO->Position++];
- }
-
- /** Writes one byte to the currently selected endpoint's bank, for IN direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- *
- * \param[in] Data Data to write into the the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_8(const uint8_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_8(const uint8_t Data)
- {
- USB_Endpoint_SelectedFIFO->Data[USB_Endpoint_SelectedFIFO->Position++] = Data;
- }
-
- /** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- */
- static inline void Endpoint_Discard_8(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Discard_8(void)
- {
- USB_Endpoint_SelectedFIFO->Position++;
- }
-
- /** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- *
- * \return Next two bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint16_t Endpoint_Read_16_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Endpoint_Read_16_LE(void)
- {
- uint16_t Byte0 = Endpoint_Read_8();
- uint16_t Byte1 = Endpoint_Read_8();
-
- return ((Byte1 << 8) | Byte0);
- }
-
- /** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- *
- * \return Next two bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint16_t Endpoint_Read_16_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint16_t Endpoint_Read_16_BE(void)
- {
- uint16_t Byte0 = Endpoint_Read_8();
- uint16_t Byte1 = Endpoint_Read_8();
-
- return ((Byte0 << 8) | Byte1);
- }
-
- /** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_16_LE(const uint16_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_16_LE(const uint16_t Data)
- {
- Endpoint_Write_8(Data & 0xFF);
- Endpoint_Write_8(Data >> 8);
- }
-
- /** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_16_BE(const uint16_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_16_BE(const uint16_t Data)
- {
- Endpoint_Write_8(Data >> 8);
- Endpoint_Write_8(Data & 0xFF);
- }
-
- /** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- */
- static inline void Endpoint_Discard_16(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Discard_16(void)
- {
- Endpoint_Discard_8();
- Endpoint_Discard_8();
- }
-
- /** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- *
- * \return Next four bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint32_t Endpoint_Read_32_LE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Endpoint_Read_32_LE(void)
- {
- uint32_t Byte0 = Endpoint_Read_8();
- uint32_t Byte1 = Endpoint_Read_8();
- uint32_t Byte2 = Endpoint_Read_8();
- uint32_t Byte3 = Endpoint_Read_8();
-
- return ((Byte3 << 24) | (Byte2 << 16) | (Byte1 << 8) | Byte0);
- }
-
- /** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- *
- * \return Next four bytes in the currently selected endpoint's FIFO buffer.
- */
- static inline uint32_t Endpoint_Read_32_BE(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
- static inline uint32_t Endpoint_Read_32_BE(void)
- {
- uint32_t Byte0 = Endpoint_Read_8();
- uint32_t Byte1 = Endpoint_Read_8();
- uint32_t Byte2 = Endpoint_Read_8();
- uint32_t Byte3 = Endpoint_Read_8();
-
- return ((Byte0 << 24) | (Byte1 << 16) | (Byte2 << 8) | Byte3);
- }
-
- /** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_32_LE(const uint32_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_32_LE(const uint32_t Data)
- {
- Endpoint_Write_8(Data & 0xFF);
- Endpoint_Write_8(Data >> 8);
- Endpoint_Write_8(Data >> 16);
- Endpoint_Write_8(Data >> 24);
- }
-
- /** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN
- * direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- *
- * \param[in] Data Data to write to the currently selected endpoint's FIFO buffer.
- */
- static inline void Endpoint_Write_32_BE(const uint32_t Data) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Write_32_BE(const uint32_t Data)
- {
- Endpoint_Write_8(Data >> 24);
- Endpoint_Write_8(Data >> 16);
- Endpoint_Write_8(Data >> 8);
- Endpoint_Write_8(Data & 0xFF);
- }
-
- /** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints.
- *
- * \ingroup Group_EndpointPrimitiveRW_XMEGA
- */
- static inline void Endpoint_Discard_32(void) ATTR_ALWAYS_INLINE;
- static inline void Endpoint_Discard_32(void)
- {
- Endpoint_Discard_8();
- Endpoint_Discard_8();
- Endpoint_Discard_8();
- Endpoint_Discard_8();
- }
-
- /* External Variables: */
- /** Global indicating the maximum packet size of the default control endpoint located at address
- * 0 in the device. This value is set to the value indicated in the device descriptor in the user
- * project once the USB interface is initialized into device mode.
- *
- * If space is an issue, it is possible to fix this to a static value by defining the control
- * endpoint size in the \c FIXED_CONTROL_ENDPOINT_SIZE token passed to the compiler in the makefile
- * via the -D switch. When a fixed control endpoint size is used, the size is no longer dynamically
- * read from the descriptors at runtime and instead fixed to the given value. When used, it is
- * important that the descriptor control endpoint size value matches the size given as the
- * \c FIXED_CONTROL_ENDPOINT_SIZE token - it is recommended that the \c FIXED_CONTROL_ENDPOINT_SIZE token
- * be used in the device descriptors to ensure this.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- */
- #if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
- extern uint8_t USB_Device_ControlEndpointSize;
- #else
- #define USB_Device_ControlEndpointSize FIXED_CONTROL_ENDPOINT_SIZE
- #endif
-
- /* Function Prototypes: */
- /** Configures a table of endpoint descriptions, in sequence. This function can be used to configure multiple
- * endpoints at the same time.
- *
- * \note Endpoints with a zero address will be ignored, thus this function cannot be used to configure the
- * control endpoint.
- *
- * \param[in] Table Pointer to a table of endpoint descriptions.
- * \param[in] Entries Number of entries in the endpoint table to configure.
- *
- * \return Boolean \c true if all endpoints configured successfully, \c false otherwise.
- */
- bool Endpoint_ConfigureEndpointTable(const USB_Endpoint_Table_t* const Table,
- const uint8_t Entries);
-
- /** Completes the status stage of a control transfer on a CONTROL type endpoint automatically,
- * with respect to the data direction. This is a convenience function which can be used to
- * simplify user control request handling.
- *
- * \note This routine should not be called on non CONTROL type endpoints.
- */
- void Endpoint_ClearStatusStage(void);
-
- /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data
- * to be read or written to it.
- *
- * \note This routine should not be called on CONTROL type endpoints.
- *
- * \ingroup Group_EndpointRW_XMEGA
- *
- * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t Endpoint_WaitUntilReady(void);
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c deleted file mode 100644 index 39d920afe..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Host_XMEGA.c +++ /dev/null @@ -1,41 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_XMEGA)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c deleted file mode 100644 index 39d920afe..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/PipeStream_XMEGA.c +++ /dev/null @@ -1,41 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_XMEGA)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c deleted file mode 100644 index 6106cb581..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Pipe_XMEGA.c +++ /dev/null @@ -1,37 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBMode.h"
-
-#if defined(USB_CAN_BE_HOST)
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c deleted file mode 100644 index 35776410e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_R.c +++ /dev/null @@ -1,87 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (void* const Buffer,
- uint16_t Length)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
-
- Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint & ~ENDPOINT_DIR_IN);
-
- if (!(Length))
- Endpoint_ClearOUT();
-
- while (Length)
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- else if (Endpoint_IsSETUPReceived())
- return ENDPOINT_RWCSTREAM_HostAborted;
-
- if (Endpoint_IsOUTReceived())
- {
- while (Length && Endpoint_BytesInEndpoint())
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- }
-
- Endpoint_ClearOUT();
- }
- }
-
- while (!(Endpoint_IsINReady()))
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- }
-
- return ENDPOINT_RWCSTREAM_NoError;
-}
-
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_TRANSFER_BYTE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c deleted file mode 100644 index ed2d2d9b7..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_Control_W.c +++ /dev/null @@ -1,96 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (const void* const Buffer,
- uint16_t Length)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
- bool LastPacketFull = false;
-
- Endpoint_SelectEndpoint(USB_Endpoint_SelectedEndpoint | ENDPOINT_DIR_IN);
-
- if (Length > USB_ControlRequest.wLength)
- Length = USB_ControlRequest.wLength;
- else if (!(Length))
- Endpoint_ClearIN();
-
- while (Length || LastPacketFull)
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- else if (Endpoint_IsSETUPReceived())
- return ENDPOINT_RWCSTREAM_HostAborted;
- else if (Endpoint_IsOUTReceived())
- break;
-
- if (Endpoint_IsINReady())
- {
- uint16_t BytesInEndpoint = Endpoint_BytesInEndpoint();
-
- while (Length && (BytesInEndpoint < USB_Device_ControlEndpointSize))
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- BytesInEndpoint++;
- }
-
- LastPacketFull = (BytesInEndpoint == USB_Device_ControlEndpointSize);
- Endpoint_ClearIN();
- }
- }
-
- while (!(Endpoint_IsOUTReceived()))
- {
- uint8_t USB_DeviceState_LCL = USB_DeviceState;
-
- if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
- return ENDPOINT_RWCSTREAM_DeviceDisconnected;
- else if (USB_DeviceState_LCL == DEVICE_STATE_Suspended)
- return ENDPOINT_RWCSTREAM_BusSuspended;
- }
-
- return ENDPOINT_RWCSTREAM_NoError;
-}
-
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_TRANSFER_BYTE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c deleted file mode 100644 index 02ad97867..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/Template/Template_Endpoint_RW.c +++ /dev/null @@ -1,90 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(TEMPLATE_FUNC_NAME)
-
-// cppcheck-suppress unusedFunction
-uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer,
- uint16_t Length,
- uint16_t* const BytesProcessed)
-{
- uint8_t* DataStream = ((uint8_t*)Buffer + TEMPLATE_BUFFER_OFFSET(Length));
- uint16_t BytesInTransfer = 0;
- uint8_t ErrorCode;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- if (BytesProcessed != NULL)
- {
- Length -= *BytesProcessed;
- TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed);
- }
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- TEMPLATE_CLEAR_ENDPOINT();
-
- #if !defined(INTERRUPT_CONTROL_ENDPOINT)
- USB_USBTask();
- #endif
-
- if (BytesProcessed != NULL)
- {
- *BytesProcessed += BytesInTransfer;
- return ENDPOINT_RWSTREAM_IncompleteTransfer;
- }
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- TEMPLATE_TRANSFER_BYTE(DataStream);
- TEMPLATE_BUFFER_MOVE(DataStream, 1);
- Length--;
- BytesInTransfer++;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-#undef TEMPLATE_FUNC_NAME
-#undef TEMPLATE_BUFFER_TYPE
-#undef TEMPLATE_TRANSFER_BYTE
-#undef TEMPLATE_CLEAR_ENDPOINT
-#undef TEMPLATE_BUFFER_OFFSET
-#undef TEMPLATE_BUFFER_MOVE
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c deleted file mode 100644 index 3899278db..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c +++ /dev/null @@ -1,189 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_XMEGA)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#define __INCLUDE_FROM_USB_CONTROLLER_C
-#include "../USBController.h"
-
-#if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY))
-volatile uint8_t USB_CurrentMode = USB_MODE_None;
-#endif
-
-#if !defined(USE_STATIC_OPTIONS)
-volatile uint8_t USB_Options;
-#endif
-
-/* Ugly workaround to ensure an aligned table, since __BIGGEST_ALIGNMENT__ == 1 for 8-bit AVR-GCC */
-uint8_t USB_EndpointTable[sizeof(USB_EndpointTable_t) + 1];
-
-void USB_Init(
- #if defined(USB_CAN_BE_BOTH)
- const uint8_t Mode
- #endif
-
- #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS))
- ,
- #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
- void
- #endif
-
- #if !defined(USE_STATIC_OPTIONS)
- const uint8_t Options
- #endif
- )
-{
- #if !defined(USE_STATIC_OPTIONS)
- USB_Options = Options;
- #endif
-
- USB_IsInitialized = true;
-
- uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
- GlobalInterruptDisable();
-
- NVM.CMD = NVM_CMD_READ_CALIB_ROW_gc;
- USB.CAL0 = pgm_read_byte(offsetof(NVM_PROD_SIGNATURES_t, USBCAL0));
- USB.CAL1 = pgm_read_byte(offsetof(NVM_PROD_SIGNATURES_t, USBCAL1));
- NVM.CMD = 0;
-
- /* Ugly workaround to ensure an aligned table, since __BIGGEST_ALIGNMENT__ == 1 for the 8-bit AVR-GCC toochain */
- USB.EPPTR = ((intptr_t)&USB_EndpointTable[1] & ~(1 << 0));
- USB.CTRLA = (USB_STFRNUM_bm | ((ENDPOINT_TOTAL_ENDPOINTS - 1) << USB_MAXEP_gp));
-
- if ((USB_Options & USB_OPT_BUSEVENT_PRIHIGH) == USB_OPT_BUSEVENT_PRIHIGH)
- USB.INTCTRLA = (3 << USB_INTLVL_gp);
- else if ((USB_Options & USB_OPT_BUSEVENT_PRIMED) == USB_OPT_BUSEVENT_PRIMED)
- USB.INTCTRLA = (2 << USB_INTLVL_gp);
- else
- USB.INTCTRLA = (1 << USB_INTLVL_gp);
-
- SetGlobalInterruptMask(CurrentGlobalInt);
-
- USB_ResetInterface();
-}
-
-void USB_Disable(void)
-{
- USB_INT_DisableAllInterrupts();
- USB_INT_ClearAllInterrupts();
-
- USB_Detach();
- USB_Controller_Disable();
-
- USB_IsInitialized = false;
-}
-
-void USB_ResetInterface(void)
-{
- #if defined(USB_DEVICE_OPT_FULLSPEED)
- if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
- CLK.USBCTRL = (((F_USB / 6000000) - 1) << CLK_USBPSDIV_gp);
- else
- CLK.USBCTRL = (((F_USB / 48000000) - 1) << CLK_USBPSDIV_gp);
- #else
- CLK.USBCTRL = (((F_USB / 6000000) - 1) << CLK_USBPSDIV_gp);
- #endif
-
- if (USB_Options & USB_OPT_PLLCLKSRC)
- CLK.USBCTRL |= (CLK_USBSRC_PLL_gc | CLK_USBSEN_bm);
- else
- CLK.USBCTRL |= (CLK_USBSRC_RC32M_gc | CLK_USBSEN_bm);
-
- USB_Device_SetDeviceAddress(0);
-
- USB_INT_DisableAllInterrupts();
- USB_INT_ClearAllInterrupts();
-
- USB_Controller_Reset();
- USB_Init_Device();
-}
-
-#if defined(USB_CAN_BE_DEVICE)
-static void USB_Init_Device(void)
-{
- USB_DeviceState = DEVICE_STATE_Unattached;
- USB_Device_ConfigurationNumber = 0;
-
- #if !defined(NO_DEVICE_REMOTE_WAKEUP)
- USB_Device_RemoteWakeupEnabled = false;
- #endif
-
- #if !defined(NO_DEVICE_SELF_POWER)
- USB_Device_CurrentlySelfPowered = false;
- #endif
-
- #if !defined(FIXED_CONTROL_ENDPOINT_SIZE)
- USB_Descriptor_Device_t* DeviceDescriptorPtr;
-
- #if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \
- !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
- uint8_t DescriptorAddressSpace;
-
- if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr, &DescriptorAddressSpace) != NO_DESCRIPTOR)
- {
- if (DescriptorAddressSpace == MEMSPACE_FLASH)
- USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
- else if (DescriptorAddressSpace == MEMSPACE_EEPROM)
- USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
- else
- USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
- }
- #else
- if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
- {
- #if defined(USE_RAM_DESCRIPTORS)
- USB_Device_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
- #elif defined(USE_EEPROM_DESCRIPTORS)
- USB_Device_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
- #else
- USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
- #endif
- }
- #endif
- #endif
-
- if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
- USB_Device_SetLowSpeed();
- else
- USB_Device_SetFullSpeed();
-
- Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
- USB_Device_ControlEndpointSize, 1);
-
- USB_INT_Enable(USB_INT_BUSEVENTI);
-
- USB_Attach();
-}
-#endif
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h deleted file mode 100644 index bb37905ab..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.h +++ /dev/null @@ -1,313 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Controller definitions for the AVR XMEGA microcontrollers.
- * \copydetails Group_USBManagement_XMEGA
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-/** \ingroup Group_USBManagement
- * \defgroup Group_USBManagement_XMEGA USB Interface Management (XMEGA)
- * \brief USB Controller definitions for the AVR XMEGA microcontrollers.
- *
- * Functions, macros, variables, enums and types related to the setup and management of the USB interface.
- *
- * @{
- */
-
-#ifndef __USBCONTROLLER_XMEGA_H__
-#define __USBCONTROLLER_XMEGA_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
- #include "../USBMode.h"
- #include "../Events.h"
- #include "../USBTask.h"
- #include "../USBInterrupt.h"
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Type Defines: */
- typedef struct
- {
- struct
- {
- USB_EP_t OUT;
- USB_EP_t IN;
- } Endpoints[16];
- uint16_t FrameNum;
- } ATTR_PACKED USB_EndpointTable_t;
-
- /* External Variables: */
- extern uint8_t USB_EndpointTable[];
-
- #endif
-
- /* Includes: */
- #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)
- #include "../Device.h"
- #include "../Endpoint.h"
- #include "../DeviceStandardReq.h"
- #include "../EndpointStream.h"
- #endif
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks and Defines: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- #if !defined(F_USB)
- #error F_USB is not defined. You must define F_USB to the frequency of the unprescaled USB controller clock in your project makefile.
- #endif
-
- #if ((F_USB % 6000000) || (F_USB < 6000000))
- #error Invalid F_USB specified. F_USB must be a multiple of 6MHz for USB Low Speed operation, and a multiple of 48MHz for Full Speed operation.
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** \name USB Controller Option Masks */
- //@{
- /** Sets the USB bus interrupt priority level to be low priority. The USB bus interrupt is used for Start of Frame events, bus suspend
- * and resume events, bus reset events and other events related to the management of the USB bus.
- */
- #define USB_OPT_BUSEVENT_PRILOW ((0 << 2) | (0 << 1))
-
- /** Sets the USB bus interrupt priority level to be medium priority. The USB bus interrupt is used for Start of Frame events, bus suspend
- * and resume events, bus reset events and other events related to the management of the USB bus.
- */
- #define USB_OPT_BUSEVENT_PRIMED ((0 << 2) | (1 << 1))
-
- /** Sets the USB bus interrupt priority level to be high priority. The USB bus interrupt is used for Start of Frame events, bus suspend
- * and resume events, bus reset events and other events related to the management of the USB bus.
- */
- #define USB_OPT_BUSEVENT_PRIHIGH ((1 << 2) | (0 << 1))
-
- /** Sets the USB controller to source its clock from the internal RC 32MHz clock, once it has been DFLL calibrated to 48MHz. */
- #define USB_OPT_RC32MCLKSRC (0 << 3)
-
- /** Sets the USB controller to source its clock from the internal PLL. */
- #define USB_OPT_PLLCLKSRC (1 << 3)
- //@}
-
- #if !defined(USB_STREAM_TIMEOUT_MS) || defined(__DOXYGEN__)
- /** Constant for the maximum software timeout period of the USB data stream transfer functions
- * (both control and standard) when in either device or host mode. If the next packet of a stream
- * is not received or acknowledged within this time period, the stream function will fail.
- *
- * This value may be overridden in the user project makefile as the value of the
- * \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch.
- */
- #define USB_STREAM_TIMEOUT_MS 100
- #endif
-
- /* Inline Functions: */
- /** Detaches the device from the USB bus. This has the effect of removing the device from any
- * attached host, ceasing USB communications. If no host is present, this prevents any host from
- * enumerating the device once attached until \ref USB_Attach() is called.
- */
- static inline void USB_Detach(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Detach(void)
- {
- USB.CTRLB &= ~USB_ATTACH_bm;
- }
-
- /** Attaches the device to the USB bus. This announces the device's presence to any attached
- * USB host, starting the enumeration process. If no host is present, attaching the device
- * will allow for enumeration once a host is connected to the device.
- *
- * This is inexplicably also required for proper operation while in host mode, to enable the
- * attachment of a device to the host. This is despite the bit being located in the device-mode
- * register and despite the datasheet making no mention of its requirement in host mode.
- */
- static inline void USB_Attach(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Attach(void)
- {
- USB.CTRLB |= USB_ATTACH_bm;
- }
-
- /* Function Prototypes: */
- /** Main function to initialize and start the USB interface. Once active, the USB interface will
- * allow for device connection to a host when in device mode, or for device enumeration while in
- * host mode.
- *
- * As the USB library relies on interrupts for the device and host mode enumeration processes,
- * the user must enable global interrupts before or shortly after this function is called. In
- * device mode, interrupts must be enabled within 500ms of this function being called to ensure
- * that the host does not time out whilst enumerating the device. In host mode, interrupts may be
- * enabled at the application's leisure however enumeration will not begin of an attached device
- * until after this has occurred.
- *
- * Calling this function when the USB interface is already initialized will cause a complete USB
- * interface reset and re-enumeration.
- *
- * \param[in] Mode This is a mask indicating what mode the USB interface is to be initialized to, a value
- * from the \ref USB_Modes_t enum.
- *
- * \param[in] Options Mask indicating the options which should be used when initializing the USB
- * interface to control the USB interface's behavior. This should be comprised of
- * a \c USB_OPT_REG_* mask to control the regulator, a \c USB_OPT_*_PLL mask to control the
- * PLL, and a \c USB_DEVICE_OPT_* mask (when the device mode is enabled) to set the device
- * mode speed.
- *
- * \note To reduce the FLASH requirements of the library if only device or host mode is required,
- * the mode can be statically set in the project makefile by defining the token \c USB_DEVICE_ONLY
- * (for device mode) or \c USB_HOST_ONLY (for host mode), passing the token to the compiler
- * via the -D switch. If the mode is statically set, this parameter does not exist in the
- * function prototype.
- * \n\n
- *
- * \note To reduce the FLASH requirements of the library if only fixed settings are required,
- * the options may be set statically in the same manner as the mode (see the Mode parameter of
- * this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token,
- * defined to the appropriate options masks. When the options are statically set, this
- * parameter does not exist in the function prototype.
- * \n\n
- *
- * \note The mode parameter does not exist on devices where only one mode is possible, such as USB
- * AVR models which only implement the USB device mode in hardware.
- *
- * \see \ref Group_Device for the \c USB_DEVICE_OPT_* masks.
- */
- void USB_Init(
- #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)
- const uint8_t Mode
- #endif
-
- #if (defined(USB_CAN_BE_BOTH) && !defined(USE_STATIC_OPTIONS)) || defined(__DOXYGEN__)
- ,
- #elif (!defined(USB_CAN_BE_BOTH) && defined(USE_STATIC_OPTIONS))
- void
- #endif
-
- #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__)
- const uint8_t Options
- #endif
- );
-
- /** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO
- * memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface
- * is restarted with the \ref USB_Init() function.
- */
- void USB_Disable(void);
-
- /** Resets the interface, when already initialized. This will re-enumerate the device if already connected
- * to a host, or re-enumerate an already attached device when in host mode.
- */
- void USB_ResetInterface(void);
-
- /* Global Variables: */
- #if (!defined(USB_HOST_ONLY) && !defined(USB_DEVICE_ONLY)) || defined(__DOXYGEN__)
- /** Indicates the mode that the USB interface is currently initialized to, a value from the
- * \ref USB_Modes_t enum.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- *
- * \note When the controller is initialized into UID auto-detection mode, this variable will hold the
- * currently selected USB mode (i.e. \ref USB_MODE_Device or \ref USB_MODE_Host). If the controller
- * is fixed into a specific mode (either through the \c USB_DEVICE_ONLY or \c USB_HOST_ONLY compile time
- * options, or a limitation of the USB controller in the chosen device model) this will evaluate to
- * a constant of the appropriate value and will never evaluate to \ref USB_MODE_None even when the
- * USB interface is not initialized.
- */
- extern volatile uint8_t USB_CurrentMode;
- #elif defined(USB_DEVICE_ONLY)
- #define USB_CurrentMode USB_MODE_Device
- #endif
-
- #if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__)
- /** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init()
- * was called. This value will be one of the \c USB_MODE_* masks defined elsewhere in this module.
- *
- * \attention This variable should be treated as read-only in the user application, and never manually
- * changed in value.
- */
- extern volatile uint8_t USB_Options;
- #elif defined(USE_STATIC_OPTIONS)
- #define USB_Options USE_STATIC_OPTIONS
- #endif
-
- /* Enums: */
- /** Enum for the possible USB controller modes, for initialization via \ref USB_Init() and indication back to the
- * user application via \ref USB_CurrentMode.
- */
- enum USB_Modes_t
- {
- USB_MODE_None = 0, /**< Indicates that the controller is currently not initialized in any specific USB mode. */
- USB_MODE_Device = 1, /**< Indicates that the controller is currently initialized in USB Device mode. */
- };
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Function Prototypes: */
- #if defined(__INCLUDE_FROM_USB_CONTROLLER_C)
- static void USB_Init_Device(void);
- #endif
-
- /* Inline Functions: */
- static inline void USB_Controller_Enable(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Controller_Enable(void)
- {
- USB.CTRLA |= USB_ENABLE_bm;
- }
-
- static inline void USB_Controller_Disable(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Controller_Disable(void)
- {
- USB.CTRLA &= ~USB_ENABLE_bm;
- }
-
- static inline void USB_Controller_Reset(void) ATTR_ALWAYS_INLINE;
- static inline void USB_Controller_Reset(void)
- {
- USB.CTRLA &= ~USB_ENABLE_bm;
- USB.CTRLA |= USB_ENABLE_bm;
- }
-
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c deleted file mode 100644 index 9bba25ae9..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.c +++ /dev/null @@ -1,106 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../../../Common/Common.h"
-#if (ARCH == ARCH_XMEGA)
-
-#define __INCLUDE_FROM_USB_DRIVER
-#include "../USBInterrupt.h"
-
-void USB_INT_DisableAllInterrupts(void)
-{
- USB.INTCTRLA &= USB_INTLVL_gm;
- USB.INTCTRLB = 0;
-}
-
-void USB_INT_ClearAllInterrupts(void)
-{
- USB.INTFLAGSACLR = 0xFF;
- USB.INTFLAGSBCLR = 0xFF;
-}
-
-ISR(USB_BUSEVENT_vect)
-{
- #if !defined(NO_SOF_EVENTS)
- if (USB_INT_HasOccurred(USB_INT_SOFI) && USB_INT_IsEnabled(USB_INT_SOFI))
- {
- USB_INT_Clear(USB_INT_SOFI);
-
- EVENT_USB_Device_StartOfFrame();
- }
- #endif
-
- if (USB_INT_HasOccurred(USB_INT_BUSEVENTI_Suspend))
- {
- USB_INT_Clear(USB_INT_BUSEVENTI_Suspend);
-
- #if !defined(NO_LIMITED_CONTROLLER_CONNECT)
- USB_DeviceState = DEVICE_STATE_Unattached;
- EVENT_USB_Device_Disconnect();
- #else
- USB_DeviceState = DEVICE_STATE_Suspended;
- EVENT_USB_Device_Suspend();
- #endif
- }
-
- if (USB_INT_HasOccurred(USB_INT_BUSEVENTI_Resume))
- {
- USB_INT_Clear(USB_INT_BUSEVENTI_Resume);
-
- if (USB_Device_ConfigurationNumber)
- USB_DeviceState = DEVICE_STATE_Configured;
- else
- USB_DeviceState = (USB_Device_IsAddressSet()) ? DEVICE_STATE_Configured : DEVICE_STATE_Powered;
-
- #if !defined(NO_LIMITED_CONTROLLER_CONNECT)
- EVENT_USB_Device_Connect();
- #else
- EVENT_USB_Device_WakeUp();
- #endif
- }
-
- if (USB_INT_HasOccurred(USB_INT_BUSEVENTI_Reset))
- {
- USB_INT_Clear(USB_INT_BUSEVENTI_Reset);
-
- USB_DeviceState = DEVICE_STATE_Default;
- USB_Device_ConfigurationNumber = 0;
-
- USB_Device_SetDeviceAddress(0);
-
- Endpoint_ClearEndpoints();
- Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
- USB_Device_ControlEndpointSize, 1);
-
- EVENT_USB_Device_Reset();
- }
-}
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h deleted file mode 100644 index 5eef7121e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/Core/XMEGA/USBInterrupt_XMEGA.h +++ /dev/null @@ -1,166 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief USB Controller Interrupt definitions for the AVR XMEGA microcontrollers.
- *
- * This file contains definitions required for the correct handling of low level USB service routine interrupts
- * from the USB controller.
- *
- * \note This file should not be included directly. It is automatically included as needed by the USB driver
- * dispatch header located in LUFA/Drivers/USB/USB.h.
- */
-
-#ifndef __USBINTERRUPT_XMEGA_H__
-#define __USBINTERRUPT_XMEGA_H__
-
- /* Includes: */
- #include "../../../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Preprocessor Checks: */
- #if !defined(__INCLUDE_FROM_USB_DRIVER)
- #error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Enums: */
- enum USB_Interrupts_t
- {
- USB_INT_BUSEVENTI = 1,
- USB_INT_BUSEVENTI_Suspend = 2,
- USB_INT_BUSEVENTI_Resume = 3,
- USB_INT_BUSEVENTI_Reset = 4,
- USB_INT_SOFI = 5,
- };
-
- /* Inline Functions: */
- static inline void USB_INT_Enable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE;
- static inline void USB_INT_Enable(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- case USB_INT_BUSEVENTI:
- USB.INTCTRLA |= USB_BUSEVIE_bm;
- return;
- case USB_INT_SOFI:
- USB.INTCTRLA |= USB_SOFIE_bm;
- return;
- }
- }
-
- static inline void USB_INT_Disable(const uint8_t Interrupt) ATTR_ALWAYS_INLINE;
- static inline void USB_INT_Disable(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- case USB_INT_BUSEVENTI:
- USB.INTCTRLA &= ~USB_BUSEVIE_bm;
- return;
- case USB_INT_SOFI:
- USB.INTCTRLA &= ~USB_SOFIE_bm;
- return;
- }
- }
-
- static inline void USB_INT_Clear(const uint8_t Interrupt) ATTR_ALWAYS_INLINE;
- static inline void USB_INT_Clear(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- case USB_INT_BUSEVENTI_Suspend:
- USB.INTFLAGSACLR = USB_SUSPENDIF_bm;
- return;
- case USB_INT_BUSEVENTI_Resume:
- USB.INTFLAGSACLR = USB_RESUMEIF_bm;
- return;
- case USB_INT_BUSEVENTI_Reset:
- USB.INTFLAGSACLR = USB_RSTIF_bm;
- return;
- case USB_INT_SOFI:
- USB.INTFLAGSACLR = USB_SOFIF_bm;
- return;
- }
- }
-
- static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline bool USB_INT_IsEnabled(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- case USB_INT_BUSEVENTI:
- return ((USB.INTCTRLA & USB_BUSEVIE_bm) ? true : false);
- case USB_INT_SOFI:
- return ((USB.INTCTRLA & USB_SOFIE_bm) ? true : false);
- }
-
- return false;
- }
-
- static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
- static inline bool USB_INT_HasOccurred(const uint8_t Interrupt)
- {
- switch (Interrupt)
- {
- case USB_INT_BUSEVENTI_Suspend:
- return ((USB.INTFLAGSACLR & USB_SUSPENDIF_bm) ? true : false);
- case USB_INT_BUSEVENTI_Resume:
- return ((USB.INTFLAGSACLR & USB_RESUMEIF_bm) ? true : false);
- case USB_INT_BUSEVENTI_Reset:
- return ((USB.INTFLAGSACLR & USB_RSTIF_bm) ? true : false);
- case USB_INT_SOFI:
- return ((USB.INTFLAGSACLR & USB_SOFIF_bm) ? true : false);
- }
-
- return false;
- }
-
- /* Includes: */
- #include "../USBMode.h"
- #include "../Events.h"
- #include "../USBController.h"
-
- /* Function Prototypes: */
- void USB_INT_ClearAllInterrupts(void);
- void USB_INT_DisableAllInterrupts(void);
- #endif
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/USB.h b/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/USB.h deleted file mode 100644 index 66f0fd3c0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Drivers/USB/USB.h +++ /dev/null @@ -1,418 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Master include file for the library USB functionality.
- *
- * Master include file for the library USB functionality.
- *
- * This file should be included in all user projects making use of the USB portions of the library, instead of
- * the individual USB driver submodule headers.
- */
-
-/** \defgroup Group_USB USB Core - LUFA/Drivers/USB/USB.h
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Core/ConfigDescriptors.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/DeviceStandardReq.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/Events.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/HostStandardReq.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/USBTask.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/<i>ARCH</i>/Device_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/<i>ARCH</i>/Endpoint_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/<i>ARCH</i>/EndpointStream_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/<i>ARCH</i>/Host_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/<i>ARCH</i>/Pipe_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/<i>ARCH</i>/PipeStream_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/<i>ARCH</i>/USBController_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Core/<i>ARCH</i>/USBInterrupt_<i>ARCH</i>.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- * - LUFA/Drivers/USB/Class/Common/HIDParser.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
- *
- * \section Sec_ModDescription Module Description
- * Driver and framework for the USB controller of the selected architecture and microcontroller model. This module
- * consists of many submodules, and is designed to provide an easy way to configure and control USB host, device
- * or OTG mode USB applications.
- *
- * The USB stack requires the sole control over the USB controller in the microcontroller only; i.e. it does not
- * require any additional timers or other peripherals to operate. This ensures that the USB stack requires as few
- * resources as possible.
- *
- * The USB stack can be used in Device Mode for connections to USB Hosts (see \ref Group_Device), in Host mode for
- * hosting of other USB devices (see \ref Group_Host), or as a dual role device which can either act as a USB host
- * or device depending on what peripheral is connected (see \ref Group_OTG). Both modes also require a common set
- * of USB management functions found \ref Group_USBManagement.
- */
-
-/** \defgroup Group_USBClassDrivers USB Class Drivers
- *
- * Drivers for both host and device mode of the standard USB classes, for rapid application development.
- * Class drivers give a framework which sits on top of the low level library API, allowing for standard
- * USB classes to be implemented in a project with minimal user code. These drivers can be used in
- * conjunction with the library low level APIs to implement interfaces both via the class drivers and via
- * the standard library APIs.
- *
- * Multiple device mode class drivers can be used within a project, including multiple instances of the
- * same class driver. In this way, USB Hosts and Devices can be made quickly using the internal class drivers
- * so that more time and effort can be put into the end application instead of the USB protocol.
- *
- * The available class drivers and their modes are listed below.
- *
- * <table>
- * <tr>
- * <th width="200px">USB Class</th>
- * <th width="90px">Device Mode</th>
- * <th width="90px">Host Mode</th>
- * </tr>
- * <tr>
- * <td>Android Open Accessory</td>
- * <td bgcolor="#EE0000">No</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>Audio 1.0</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>CDC-ACM</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>HID</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>MIDI</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>Mass Storage</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>Printer</td>
- * <td bgcolor="#EE0000">No</td>
-* <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>RNDIS</td>
- * <td bgcolor="#00EE00">Yes</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * <tr>
- * <td>Still Image</td>
- * <td bgcolor="#EE0000">No</td>
- * <td bgcolor="#00EE00">Yes</td>
- * </tr>
- * </table>
- *
- *
- * \section Sec_UsingClassDrivers Using the Class Drivers
- * To make the Class drivers easy to integrate into a user application, they all implement a standardized
- * design with similarly named/used function, enums, defines and types. The two different modes are implemented
- * slightly differently, and thus will be explained separately. For information on a specific class driver, read
- * the class driver's module documentation.
- *
- * \subsection Sec_ClassDriverDevice Device Mode Class Drivers
- * Implementing a Device Mode Class Driver in a user application requires a number of steps to be followed. Firstly,
- * the module configuration and state structure must be added to the project source. These structures are named in a
- * similar manner between classes, that of <tt>USB_ClassInfo_<i>{Class Name}</i>_Device_t</tt>, and are used to hold the
- * complete state and configuration for each class instance. Multiple class instances is where the power of the class
- * drivers lie; multiple interfaces of the same class simply require more instances of the Class Driver's \c USB_ClassInfo_*
- * structure.
- *
- * Inside the ClassInfo structure lies two sections, a \c Config section, and a \c State section. The \c Config
- * section contains the instance's configuration parameters, and <b>must have all fields set by the user application</b>
- * before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters
- * for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters.
- *
- * The following is an example of a properly initialized instance of the Audio Class Driver structure:
- *
- * \code
- * USB_ClassInfo_Audio_Device_t My_Audio_Interface =
- * {
- * .Config =
- * {
- * .StreamingInterfaceNumber = 1,
- * .DataINEndpoint =
- * {
- * .Address = (ENDPOINT_DIR_IN | 1),
- * .Size = 64,
- * .Banks = 1,
- * },
- * },
- * };
- * \endcode
- *
- * \note The class driver's configuration parameters should match those used in the device's descriptors that are
- * sent to the host.
- *
- * To initialize the Class driver instance, the driver's <tt><i>{Class Name}</i>_Device_ConfigureEndpoints()</tt> function
- * should be called in response to the \ref EVENT_USB_Device_ConfigurationChanged() event. This function will return a
- * boolean true value if the driver successfully initialized the instance. Like all the class driver functions, this function
- * takes in the address of the specific instance you wish to initialize - in this manner, multiple separate instances of
- * the same class type can be initialized like this:
- *
- * \code
- * void EVENT_USB_Device_ConfigurationChanged(void)
- * {
- * LEDs_SetAllLEDs(LEDMASK_USB_READY);
- *
- * if (!(Audio_Device_ConfigureEndpoints(&My_Audio_Interface)))
- * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- * }
- * \endcode
- *
- * Once initialized, it is important to maintain the class driver's state by repeatedly calling the Class Driver's
- * <tt><i>{Class Name}</i>_Device_USBTask()</tt> function in the main program loop. The exact implementation of this
- * function varies between class drivers, and can be used for any internal class driver purpose to maintain each
- * instance. Again, this function uses the address of the instance to operate on, and thus needs to be called for each
- * separate instance, just like the main USB maintenance routine \ref USB_USBTask():
- *
- * \code
- * int main(void)
- * {
- * SetupHardware();
- *
- * LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- *
- * for (;;)
- * {
- * if (USB_DeviceState != DEVICE_STATE_Configured)
- * Create_And_Process_Samples();
- *
- * Audio_Device_USBTask(&My_Audio_Interface);
- * USB_USBTask();
- * }
- * }
- * \endcode
- *
- * The final standardized Device Class Driver function is the Control Request handler function
- * <tt><i>{Class Name}</i>_Device_ProcessControlRequest()</tt>, which should be called when the
- * \ref EVENT_USB_Device_ControlRequest() event fires. This function should also be called for
- * each class driver instance, using the address of the instance to operate on as the function's
- * parameter. The request handler will abort if it is determined that the current request is not
- * targeted at the given class driver instance, thus these methods can safely be called
- * one-after-another in the event handler with no form of error checking:
- *
- * \code
- * void EVENT_USB_Device_ControlRequest(void)
- * {
- * Audio_Device_ProcessControlRequest(&My_Audio_Interface);
- * }
- * \endcode
- *
- * Each class driver may also define a set of callback functions (which are prefixed by \c CALLBACK_*
- * in the function's name) which <b>must</b> also be added to the user application - refer to each
- * individual class driver's documentation for mandatory callbacks. In addition, each class driver may
- * also define a set of events (identifiable by their prefix of \c EVENT_* in the function's name), which
- * the user application <b>may</b> choose to implement, or ignore if not needed.
- *
- * The individual Device Mode Class Driver documentation contains more information on the non-standardized,
- * class-specific functions which the user application can then use on the driver instances, such as data
- * read and write routines. See each driver's individual documentation for more information on the
- * class-specific functions.
- *
- * \subsection Sec_ClassDriverHost Host Mode Class Drivers
- * Implementing a Host Mode Class Driver in a user application requires a number of steps to be followed. Firstly,
- * the module configuration and state structure must be added to the project source. These structures are named in a
- * similar manner between classes, that of <tt>USB_ClassInfo_<b>{Class Name}</b>_Host_t</tt>, and are used to hold the
- * complete state and configuration for each class instance. Multiple class instances is where the power of the class
- * drivers lie; multiple interfaces of the same class simply require more instances of the Class Driver's \c USB_ClassInfo_*
- * structure.
- *
- * Inside the \c USB_ClassInfo_* structure lies two sections, a \c Config section, and a \c State section. The \c Config
- * section contains the instance's configuration parameters, and <b>must have all fields set by the user application</b>
- * before the class driver is used. Each Device mode Class driver typically contains a set of configuration parameters
- * for the endpoint size/number of the associated logical USB interface, plus any class-specific configuration parameters.
- *
- * The following is an example of a properly initialized instance of the MIDI Host Class Driver structure:
- *
- * \code
- * USB_ClassInfo_MIDI_Host_t My_MIDI_Interface =
- * {
- * .Config =
- * {
- * .DataINPipe =
- * {
- * .Address = (PIPE_DIR_IN | 1),
- * .Size = 64,
- * .Banks = 1,
- * },
- * .DataOUTPipe =
- * {
- * .Address = (PIPE_DIR_OUT | 2),
- * .Size = 64,
- * .Banks = 1,
- * },
- * },
- * };
- * \endcode
- *
- * To initialize the Class driver instance, the driver's <tt><b>{Class Name}</b>_Host_ConfigurePipes()</tt> function
- * should be called in response to the \c EVENT_USB_Host_DeviceEnumerationComplete() event firing. This function will
- * will return an error code from the class driver's <tt><b>{Class Name}</b>_EnumerationFailure_ErrorCodes_t</tt> enum
- * to indicate if the driver successfully initialized the instance and bound it to an interface in the attached device.
- * Like all the class driver functions, this function takes in the address of the specific instance you wish to initialize -
- * in this manner, multiple separate instances of the same class type can be initialized. A fragment of a Class Driver
- * based Host mode application may look like the following:
- *
- * \code
- * void EVENT_USB_Host_DeviceEnumerationComplete(void)
- * {
- * LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
- *
- * uint16_t ConfigDescriptorSize;
- * uint8_t ConfigDescriptorData[512];
- *
- * if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
- * sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
- * {
- * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- * return;
- * }
- *
- * if (MIDI_Host_ConfigurePipes(&Keyboard_MIDI_Interface,
- * ConfigDescriptorSize, ConfigDescriptorData) != MIDI_ENUMERROR_NoError)
- * {
- * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- * return;
- * }
- *
- * if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
- * {
- * LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- * return;
- * }
- *
- * LEDs_SetAllLEDs(LEDMASK_USB_READY);
- * }
- * \endcode
- *
- * Note that the function also requires the device's configuration descriptor so that it can determine which interface
- * in the device to bind to - this can be retrieved as shown in the above fragment using the
- * \ref USB_Host_GetDeviceConfigDescriptor() function. If the device does not implement the interface the class driver
- * is looking for, if all the matching interfaces are already bound to class driver instances or if an error occurs while
- * binding to a device interface (for example, a device endpoint bank larger that the maximum supported bank size is used)
- * the configuration will fail.
- *
- * To complete the device enumeration after binding the host mode Class Drivers to the attached device, a call to
- * \c USB_Host_SetDeviceConfiguration() must be made. If the device configuration is not set within the
- * \c EVENT_USB_Host_DeviceEnumerationComplete() event, the host still will assume the device enumeration has failed.
- *
- * Once initialized, it is important to maintain the class driver's state by repeatedly calling the Class Driver's
- * <tt><b>{Class Name}</b>_Host_USBTask()</tt> function in the main program loop. The exact implementation of this
- * function varies between class drivers, and can be used for any internal class driver purpose to maintain each
- * instance. Again, this function uses the address of the instance to operate on, and thus needs to be called for each
- * separate instance, just like the main USB maintenance routine \ref USB_USBTask():
- *
- * \code
- * int main(void)
- * {
- * SetupHardware();
- *
- * LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
- *
- * for (;;)
- * {
- * if (USB_HostState != HOST_STATE_Configured)
- * Create_And_Process_Samples();
- *
- * MIDI_Host_USBTask(&My_Audio_Interface);
- * USB_USBTask();
- * }
- * }
- * \endcode
- *
- * Each class driver may also define a set of callback functions (which are prefixed by \c CALLBACK_*
- * in the function's name) which <b>must</b> also be added to the user application - refer to each
- * individual class driver's documentation for mandatory callbacks. In addition, each class driver may
- * also define a set of events (identifiable by their prefix of \c EVENT_* in the function's name), which
- * the user application <b>may</b> choose to implement, or ignore if not needed.
- *
- * The individual Host Mode Class Driver documentation contains more information on the non-standardized,
- * class-specific functions which the user application can then use on the driver instances, such as data
- * read and write routines. See each driver's individual documentation for more information on the
- * class-specific functions.
- */
-
-#ifndef __USB_H__
-#define __USB_H__
-
- /* Macros: */
- #define __INCLUDE_FROM_USB_DRIVER
-
- /* Includes: */
- #include "../../Common/Common.h"
- #include "Core/USBMode.h"
-
- /* Includes: */
- #include "Core/USBTask.h"
- #include "Core/Events.h"
- #include "Core/StdDescriptors.h"
- #include "Core/ConfigDescriptors.h"
- #include "Core/USBController.h"
- #include "Core/USBInterrupt.h"
-
- #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)
- #include "Core/Host.h"
- #include "Core/Pipe.h"
- #include "Core/HostStandardReq.h"
- #include "Core/PipeStream.h"
- #endif
-
- #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)
- #include "Core/Device.h"
- #include "Core/Endpoint.h"
- #include "Core/DeviceStandardReq.h"
- #include "Core/EndpointStream.h"
- #endif
-
- #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)
- #include "Core/OTG.h"
- #endif
-
- #include "Class/AndroidAccessoryClass.h"
- #include "Class/AudioClass.h"
- #include "Class/CDCClass.h"
- #include "Class/HIDClass.h"
- #include "Class/MassStorageClass.h"
- #include "Class/MIDIClass.h"
- #include "Class/PrinterClass.h"
- #include "Class/RNDISClass.h"
- #include "Class/StillImageClass.h"
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/License.txt b/protocol/lufa/LUFA-120730/LUFA/License.txt deleted file mode 100644 index 9e27adfb2..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/License.txt +++ /dev/null @@ -1,24 +0,0 @@ - LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-
-
-Permission to use, copy, modify, and distribute this software
-and its documentation for any purpose is hereby granted without
-fee, provided that the above copyright notice appear in all
-copies and that both that the copyright notice and this
-permission notice and warranty disclaimer appear in supporting
-documentation, and that the name of the author not be used in
-advertising or publicity pertaining to distribution of the
-software without specific, written prior permission.
-
-The author disclaim all warranties with regard to this
-software, including all implied warranties of merchantability
-and fitness. In no event shall the author be liable for any
-special, indirect or consequential damages or any damages
-whatsoever resulting from loss of use, data or profits, whether
-in an action of contract, negligence or other tortious action,
-arising out of or in connection with the use or performance of
-this software.
\ No newline at end of file diff --git a/protocol/lufa/LUFA-120730/LUFA/Platform/Platform.h b/protocol/lufa/LUFA-120730/LUFA/Platform/Platform.h deleted file mode 100644 index 9bd29f5c0..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Platform/Platform.h +++ /dev/null @@ -1,80 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Architecture Specific Hardware Platform Drivers.
- *
- * This file is the master dispatch header file for the device-specific hardware platform drivers, for low level
- * hardware configuration and management. The platform drivers are a set of drivers which are designed to provide
- * a high level management layer for the various low level system functions such as clock control and interrupt
- * management.
- *
- * User code may choose to either include this master dispatch header file to include all available platform
- * driver header files for the current architecture, or may choose to only include the specific platform driver
- * modules required for a particular application.
- */
-
-/** \defgroup Group_PlatformDrivers System Platform Drivers - LUFA/Platform/Platform.h
- * \brief Hardware platform drivers.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - <b>UC3 Architecture Only:</b> LUFA/Platform/UC3/InterruptManagement.c <i>(Makefile source module name: LUFA_SRC_PLATFORM)</i>
- * - <b>UC3 Architecture Only:</b> LUFA/Platform/UC3/Exception.S <i>(Makefile source module name: LUFA_SRC_PLATFORM)</i>
- *
- * \section Sec_ModDescription Module Description
- * Device-specific hardware platform drivers, for low level hardware configuration and management. The platform
- * drivers are a set of drivers which are designed to provide a high level management layer for the various low level
- * system functions such as clock control and interrupt management.
- *
- * User code may choose to either include this master dispatch header file to include all available platform
- * driver header files for the current architecture, or may choose to only include the specific platform driver
- * modules required for a particular application.
- *
- * \note The exact APIs and availability of sub-modules within the platform driver group may vary depending on the
- * target used - see individual target module documentation for the API specific to your target processor.
- */
-
-#ifndef __LUFA_PLATFORM_H__
-#define __LUFA_PLATFORM_H__
-
- /* Includes: */
- #include "../Common/Common.h"
-
- /* Includes: */
- #if (ARCH == ARCH_UC3)
- #include "UC3/ClockManagement.h"
- #include "UC3/InterruptManagement.h"
- #elif (ARCH == ARCH_XMEGA)
- #include "XMEGA/ClockManagement.h"
- #endif
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/ClockManagement.h b/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/ClockManagement.h deleted file mode 100644 index fb62fdcc9..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/ClockManagement.h +++ /dev/null @@ -1,338 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Module Clock Driver for the AVR32 UC3 microcontrollers.
- *
- * Clock management driver for the AVR32 UC3 microcontrollers. This driver allows for the configuration
- * of the various clocks within the device to clock the various peripherals.
- */
-
-/** \ingroup Group_PlatformDrivers_UC3
- * \defgroup Group_PlatformDrivers_UC3Clocks Clock Management Driver - LUFA/Platform/UC3/ClockManagement.h
- * \brief Module Clock Driver for the AVR32 UC3 microcontrollers.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Clock management driver for the AVR32 UC3 microcontrollers. This driver allows for the configuration
- * of the various clocks within the device to clock the various peripherals.
- *
- * Usage Example:
- * \code
- * #include <LUFA/Platform/UC3/ClockManagement.h>
- *
- * void main(void)
- * {
- * // Start the master external oscillator which will be used as the main clock reference
- * AVR32CLK_StartExternalOscillator(0, EXOSC_MODE_8MHZ_OR_MORE, EXOSC_START_0CLK);
- *
- * // Start the PLL for the CPU clock, switch CPU to it
- * AVR32CLK_StartPLL(0, CLOCK_SRC_OSC0, 12000000, F_CPU);
- * AVR32CLK_SetCPUClockSource(CLOCK_SRC_PLL0, F_CPU);
- *
- * // Start the PLL for the USB Generic Clock module
- * AVR32CLK_StartPLL(1, CLOCK_SRC_OSC0, 12000000, 48000000);
- * }
- * \endcode
- *
- * @{
- */
-
-#ifndef _UC3_CLOCK_MANAGEMENT_H_
-#define _UC3_CLOCK_MANAGEMENT_H_
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Enum for the possible external oscillator types. */
- enum UC3_Extern_OSC_ClockTypes_t
- {
- EXOSC_MODE_CLOCK = AVR32_PM_OSCCTRL0_MODE_EXT_CLOCK, /**< External clock (non-crystal) mode. */
- EXOSC_MODE_900KHZ_MAX = AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G0, /**< External crystal oscillator equal to or slower than 900KHz. */
- EXOSC_MODE_3MHZ_MAX = AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G1, /**< External crystal oscillator equal to or slower than 3MHz. */
- EXOSC_MODE_8MHZ_MAX = AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G2, /**< External crystal oscillator equal to or slower than 8MHz. */
- EXOSC_MODE_8MHZ_OR_MORE = AVR32_PM_OSCCTRL0_MODE_CRYSTAL_G3, /**< External crystal oscillator equal to or faster than 8MHz. */
- };
-
- /** Enum for the possible external oscillator startup times. */
- enum UC3_Extern_OSC_ClockStartup_t
- {
- EXOSC_START_0CLK = AVR32_PM_OSCCTRL0_STARTUP_0_RCOSC, /**< Immediate startup, no delay. */
- EXOSC_START_64CLK = AVR32_PM_OSCCTRL0_STARTUP_64_RCOSC, /**< Wait 64 clock cycles before startup for stability. */
- EXOSC_START_128CLK = AVR32_PM_OSCCTRL0_STARTUP_128_RCOSC, /**< Wait 128 clock cycles before startup for stability. */
- EXOSC_START_2048CLK = AVR32_PM_OSCCTRL0_STARTUP_2048_RCOSC, /**< Wait 2048 clock cycles before startup for stability. */
- EXOSC_START_4096CLK = AVR32_PM_OSCCTRL0_STARTUP_4096_RCOSC, /**< Wait 4096 clock cycles before startup for stability. */
- EXOSC_START_8192CLK = AVR32_PM_OSCCTRL0_STARTUP_8192_RCOSC, /**< Wait 8192 clock cycles before startup for stability. */
- EXOSC_START_16384CLK = AVR32_PM_OSCCTRL0_STARTUP_16384_RCOSC, /**< Wait 16384 clock cycles before startup for stability. */
- };
-
- /** Enum for the possible module clock sources. */
- enum UC3_System_ClockSource_t
- {
- CLOCK_SRC_SLOW_CLK = 0, /**< Clock sourced from the internal slow clock. */
- CLOCK_SRC_OSC0 = 1, /**< Clock sourced from the Oscillator 0 clock. */
- CLOCK_SRC_OSC1 = 2, /**< Clock sourced from the Oscillator 1 clock. */
- CLOCK_SRC_PLL0 = 3, /**< Clock sourced from the PLL 0 clock. */
- CLOCK_SRC_PLL1 = 4, /**< Clock sourced from the PLL 1 clock. */
- };
-
- /* Inline Functions: */
- /** Starts the given external oscillator of the UC3 microcontroller, with the given options. This routine blocks until
- * the oscillator is ready for use.
- *
- * \param[in] Channel Index of the external oscillator to start.
- * \param[in] Type Type of clock attached to the given oscillator channel, a value from \ref UC3_Extern_OSC_ClockTypes_t.
- * \param[in] Startup Statup time of the external oscillator, a value from \ref UC3_Extern_OSC_ClockStartup_t.
- *
- * \return Boolean \c true if the external oscillator was successfully started, \c false if invalid parameters specified.
- */
- static inline bool AVR32CLK_StartExternalOscillator(const uint8_t Channel,
- const uint8_t Type,
- const uint8_t Startup) ATTR_ALWAYS_INLINE;
- static inline bool AVR32CLK_StartExternalOscillator(const uint8_t Channel,
- const uint8_t Type,
- const uint8_t Startup)
- {
- switch (Channel)
- {
- case 0:
- AVR32_PM.OSCCTRL0.startup = Startup;
- AVR32_PM.OSCCTRL0.mode = Type;
- break;
- case 1:
- AVR32_PM.OSCCTRL1.startup = Startup;
- AVR32_PM.OSCCTRL1.mode = Type;
- break;
- default:
- return false;
- }
-
- AVR32_PM.mcctrl |= (1 << (AVR32_PM_MCCTRL_OSC0EN_OFFSET + Channel));
-
- while (!(AVR32_PM.poscsr & (1 << (AVR32_PM_POSCSR_OSC0RDY_OFFSET + Channel))));
- return true;
- }
-
- /** Stops the given external oscillator of the UC3 microcontroller.
- *
- * \param[in] Channel Index of the external oscillator to stop.
- */
- static inline void AVR32CLK_StopExternalOscillator(const uint8_t Channel) ATTR_ALWAYS_INLINE;
- static inline void AVR32CLK_StopExternalOscillator(const uint8_t Channel)
- {
- AVR32_PM.mcctrl &= ~(1 << (AVR32_PM_MCCTRL_OSC0EN_OFFSET + Channel));
- }
-
- /** Starts the given PLL of the UC3 microcontroller, with the given options. This routine blocks until the PLL is ready for use.
- *
- * \attention The output frequency must be equal to or greater than the source frequency.
- *
- * \param[in] Channel Index of the PLL to start.
- * \param[in] Source Clock source for the PLL, a value from \ref UC3_System_ClockSource_t.
- * \param[in] SourceFreq Frequency of the PLL's clock source, in Hz.
- * \param[in] Frequency Target frequency of the PLL's output.
- *
- * \return Boolean \c true if the PLL was successfully started, \c false if invalid parameters specified.
- */
- static inline bool AVR32CLK_StartPLL(const uint8_t Channel,
- const uint8_t Source,
- const uint32_t SourceFreq,
- const uint32_t Frequency) ATTR_ALWAYS_INLINE;
- static inline bool AVR32CLK_StartPLL(const uint8_t Channel,
- const uint8_t Source,
- const uint32_t SourceFreq,
- const uint32_t Frequency)
- {
- if (SourceFreq > Frequency)
- return false;
-
- switch (Source)
- {
- case CLOCK_SRC_OSC0:
- AVR32_PM.PLL[Channel].pllosc = 0;
- break;
- case CLOCK_SRC_OSC1:
- AVR32_PM.PLL[Channel].pllosc = 1;
- break;
- default:
- return false;
- }
-
- AVR32_PM.PLL[Channel].pllmul = (Frequency / SourceFreq) ? (((Frequency / SourceFreq) - 1) / 2) : 0;
- AVR32_PM.PLL[Channel].plldiv = 0;
- AVR32_PM.PLL[Channel].pllen = true;
-
- while (!(AVR32_PM.poscsr & (1 << (AVR32_PM_POSCSR_LOCK0_OFFSET + Channel))));
- return true;
- }
-
- /** Stops the given PLL of the UC3 microcontroller.
- *
- * \param[in] Channel Index of the PLL to stop.
- */
- static inline void AVR32CLK_StopPLL(const uint8_t Channel) ATTR_ALWAYS_INLINE;
- static inline void AVR32CLK_StopPLL(const uint8_t Channel)
- {
- AVR32_PM.PLL[Channel].pllen = false;
- }
-
- /** Starts the given Generic Clock of the UC3 microcontroller, with the given options.
- *
- * \param[in] Channel Index of the Generic Clock to start.
- * \param[in] Source Clock source for the Generic Clock, a value from \ref UC3_System_ClockSource_t.
- * \param[in] SourceFreq Frequency of the Generic Clock's clock source, in Hz.
- * \param[in] Frequency Target frequency of the Generic Clock's output.
- *
- * \return Boolean \c true if the Generic Clock was successfully started, \c false if invalid parameters specified.
- */
- static inline bool AVR32CLK_StartGenericClock(const uint8_t Channel,
- const uint8_t Source,
- const uint32_t SourceFreq,
- const uint32_t Frequency) ATTR_ALWAYS_INLINE;
- static inline bool AVR32CLK_StartGenericClock(const uint8_t Channel,
- const uint8_t Source,
- const uint32_t SourceFreq,
- const uint32_t Frequency)
- {
- if (Channel >= AVR32_PM_GCLK_NUM)
- return false;
-
- if (SourceFreq < Frequency)
- return false;
-
- switch (Source)
- {
- case CLOCK_SRC_OSC0:
- AVR32_PM.GCCTRL[Channel].pllsel = false;
- AVR32_PM.GCCTRL[Channel].oscsel = 0;
- break;
- case CLOCK_SRC_OSC1:
- AVR32_PM.GCCTRL[Channel].pllsel = false;
- AVR32_PM.GCCTRL[Channel].oscsel = 1;
- break;
- case CLOCK_SRC_PLL0:
- AVR32_PM.GCCTRL[Channel].pllsel = true;
- AVR32_PM.GCCTRL[Channel].oscsel = 0;
- break;
- case CLOCK_SRC_PLL1:
- AVR32_PM.GCCTRL[Channel].pllsel = true;
- AVR32_PM.GCCTRL[Channel].oscsel = 1;
- break;
- default:
- return false;
- }
-
- AVR32_PM.GCCTRL[Channel].diven = (SourceFreq > Frequency) ? true : false;
- AVR32_PM.GCCTRL[Channel].div = (((SourceFreq / Frequency) - 1) / 2);
- AVR32_PM.GCCTRL[Channel].cen = true;
-
- return true;
- }
-
- /** Stops the given generic clock of the UC3 microcontroller.
- *
- * \param[in] Channel Index of the generic clock to stop.
- *
- * \return Boolean \c true if the generic clock was sucessfully stopped, \c false if invalid parameters specified.
- */
- static inline bool AVR32CLK_StopGenericClock(const uint8_t Channel) ATTR_ALWAYS_INLINE;
- static inline bool AVR32CLK_StopGenericClock(const uint8_t Channel)
- {
- if (Channel >= AVR32_PM_GCLK_NUM)
- return false;
-
- AVR32_PM.GCCTRL[Channel].cen = false;
-
- return true;
- }
-
- /** Sets the clock source for the main microcontroller core. The given clock source should be configured
- * and ready for use before this function is called.
- *
- * This function will configure the FLASH controller's wait states automatically to suit the given clock source.
- *
- * \param[in] Source Clock source for the CPU core, a value from \ref UC3_System_ClockSource_t.
- * \param[in] SourceFreq Frequency of the CPU core's clock source, in Hz.
- *
- * \return Boolean \c true if the CPU core clock was sucessfully altered, \c false if invalid parameters specified.
- */
- static inline bool AVR32CLK_SetCPUClockSource(const uint8_t Source,
- const uint32_t SourceFreq) ATTR_ALWAYS_INLINE;
- static inline bool AVR32CLK_SetCPUClockSource(const uint8_t Source,
- const uint32_t SourceFreq)
- {
- if (SourceFreq > AVR32_PM_CPU_MAX_FREQ)
- return false;
-
- AVR32_FLASHC.FCR.fws = (SourceFreq > AVR32_FLASHC_FWS_0_MAX_FREQ) ? true : false;
-
- switch (Source)
- {
- #if defined(AVR32_PM_MCCTRL_MCSEL_SLOW)
- case CLOCK_SRC_SLOW_CLK:
- AVR32_PM.MCCTRL.mcsel = AVR32_PM_MCCTRL_MCSEL_SLOW;
- break;
- #endif
- #if defined(AVR32_PM_MCCTRL_MCSEL_OSC0)
- case CLOCK_SRC_OSC0:
- AVR32_PM.MCCTRL.mcsel = AVR32_PM_MCCTRL_MCSEL_OSC0;
- break;
- #endif
- #if defined(AVR32_PM_MCCTRL_MCSEL_PLL0)
- case CLOCK_SRC_PLL0:
- AVR32_PM.MCCTRL.mcsel = AVR32_PM_MCCTRL_MCSEL_PLL0;
- break;
- #endif
- default:
- return false;
- }
-
- return true;
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/Exception.S b/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/Exception.S deleted file mode 100644 index 1666323e5..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/Exception.S +++ /dev/null @@ -1,128 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2011.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#if defined(__AVR32__)
-#include <avr32/io.h>
-
-.section .exception_handlers, "ax", @progbits
-
-// ================= EXCEPTION TABLE ================
-.balign 0x200
-.global EVBA_Table
-EVBA_Table:
-
-.org 0x000
-Exception_Unrecoverable_Exception:
- rjmp $
-.org 0x004
-Exception_TLB_Multiple_Hit:
- rjmp $
-.org 0x008
-Exception_Bus_Error_Data_Fetch:
- rjmp $
-.org 0x00C
-Exception_Bus_Error_Instruction_Fetch:
- rjmp $
-.org 0x010
-Exception_NMI:
- rjmp $
-.org 0x014
-Exception_Instruction_Address:
- rjmp $
-.org 0x018
-Exception_ITLB_Protection:
- rjmp $
-.org 0x01C
-Exception_OCD_Breakpoint:
- rjmp $
-.org 0x020
-Exception_Illegal_Opcode:
- rjmp $
-.org 0x024
-Exception_Unimplemented_Instruction:
- rjmp $
-.org 0x028
-Exception_Privilege_Violation:
- rjmp $
-.org 0x02C
-Exception_Floating_Point:
- rjmp $
-.org 0x030
-Exception_Coprocessor_Absent:
- rjmp $
-.org 0x034
-Exception_Data_Address_Read:
- rjmp $
-.org 0x038
-Exception_Data_Address_Write:
- rjmp $
-.org 0x03C
-Exception_DTLB_Protection_Read:
- rjmp $
-.org 0x040
-Exception_DTLB_Protection_Write:
- rjmp $
-.org 0x044
-Exception_DTLB_Modified:
- rjmp $
-.org 0x050
-Exception_ITLB_Miss:
- rjmp $
-.org 0x060
-Exception_DTLB_Miss_Read:
- rjmp $
-.org 0x070
-Exception_DTLB_Miss_Write:
- rjmp $
-.org 0x100
-Exception_Supervisor_Call:
- rjmp $
-// ============== END OF EXCEPTION TABLE =============
-
-// ============= GENERAL INTERRUPT HANDLER ===========
-.balign 4
-.irp Level, 0, 1, 2, 3
-Exception_INT\Level:
- mov r12, \Level
- call INTC_GetInterruptHandler
- mov pc, r12
-.endr
-// ========= END OF GENERAL INTERRUPT HANDLER ========
-
-// ====== GENERAL INTERRUPT HANDLER OFFSET TABLE ======
-.balign 4
-.global Autovector_Table
-Autovector_Table:
-.irp Level, 0, 1, 2, 3
- .word ((AVR32_INTC_INT0 + \Level) << AVR32_INTC_IPR_INTLEVEL_OFFSET) | (Exception_INT\Level - EVBA_Table)
-.endr
-// === END OF GENERAL INTERRUPT HANDLER OFFSET TABLE ===
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/InterruptManagement.c b/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/InterruptManagement.c deleted file mode 100644 index 84e16ba20..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/InterruptManagement.c +++ /dev/null @@ -1,68 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-#include "../../Common/Common.h"
-#if (ARCH == ARCH_UC3)
-
-#define __INCLUDE_FROM_INTMANAGEMENT_C
-#include "InterruptManagement.h"
-
-/** Interrupt vector table, containing the ISR to call for each interrupt group */
-InterruptHandlerPtr_t InterruptHandlers[AVR32_INTC_NUM_INT_GRPS];
-
-/** ISR for unhandled interrupt groups */
-ISR(Unhandled_Interrupt)
-{
- for (;;);
-}
-
-/** Retrieves the associated interrupt handler for the interrupt group currently being fired. This
- * is called directly from the exception handler routine before dispatching to the ISR.
- */
-InterruptHandlerPtr_t INTC_GetInterruptHandler(const uint_reg_t InterruptLevel)
-{
- return InterruptHandlers[AVR32_INTC.icr[AVR32_INTC_INT3 - InterruptLevel]];
-}
-
-/** Initializes the interrupt controller ready to handle interrupts. This must be called at the
- * start of the user program before any interrupts are registered or enabled.
- */
-void INTC_Init(void)
-{
- for (uint8_t InterruptGroup = 0; InterruptGroup < AVR32_INTC_NUM_INT_GRPS; InterruptGroup++)
- {
- InterruptHandlers[InterruptGroup] = Unhandled_Interrupt;
- AVR32_INTC.ipr[InterruptGroup] = Autovector_Table[AVR32_INTC_INT0];
- }
-
- __builtin_mtsr(AVR32_EVBA, (uintptr_t)&EVBA_Table);
-}
-
-#endif
diff --git a/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/InterruptManagement.h b/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/InterruptManagement.h deleted file mode 100644 index b0e1e3ec1..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Platform/UC3/InterruptManagement.h +++ /dev/null @@ -1,163 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Interrupt Controller Driver for the AVR32 UC3 microcontrollers.
- *
- * Interrupt controller driver for the AVR32 UC3 microcontrollers, for the configuration of interrupt
- * handlers within the device.
- */
-
-/** \ingroup Group_PlatformDrivers_UC3
- * \defgroup Group_PlatformDrivers_UC3Interrupts Interrupt Controller Driver - LUFA/Platform/UC3/InterruptManagement.h
- * \brief Interrupt Controller Driver for the AVR32 UC3 microcontrollers.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - LUFA/Platform/UC3/InterruptManagement.c <i>(Makefile source module name: LUFA_SRC_PLATFORM)</i>
- * - LUFA/Platform/UC3/Exception.S <i>(Makefile source module name: LUFA_SRC_PLATFORM)</i>
- *
- * \section Sec_ModDescription Module Description
- * Interrupt controller driver for the AVR32 UC3 microcontrollers, for the configuration of interrupt
- * handlers within the device.
- *
- * Usage Example:
- * \code
- * #include <LUFA/Platform/UC3/InterruptManagement.h>
- *
- * ISR(USB_Group_IRQ_Handler)
- * {
- * // USB group handler code here
- * }
- *
- * void main(void)
- * {
- * INTC_Init();
- * INTC_RegisterGroupHandler(INTC_IRQ_GROUP(AVR32_USBB_IRQ), AVR32_INTC_INT0, USB_Group_IRQ_Handler);
- * }
- * \endcode
- *
- * @{
- */
-
-#ifndef _UC3_INTERRUPT_MANAGEMENT_H_
-#define _UC3_INTERRUPT_MANAGEMENT_H_
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Private Interface - For use in library only: */
- #if !defined(__DOXYGEN__)
- /* Type Defines: */
- typedef void (*InterruptHandlerPtr_t)(void);
-
- /* External Variables: */
- #if defined(__INCLUDE_FROM_INTMANAGEMENT_C)
- extern const void EVBA_Table;
- #endif
- extern InterruptHandlerPtr_t InterruptHandlers[AVR32_INTC_NUM_INT_GRPS];
- extern const uint32_t Autovector_Table[];
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Converts a given interrupt index into its associated interrupt group.
- *
- * \param[in] IRQIndex Index of the interrupt request to convert.
- *
- * \return Interrupt group number associated with the interrupt index.
- */
- #define INTC_IRQ_GROUP(IRQIndex) (IRQIndex / 32)
-
- /** Converts a given interrupt index into its associated interrupt line.
- *
- * \param[in] IRQIndex Index of the interrupt request to convert.
- *
- * \return Interrupt line number associated with the interrupt index.
- */
- #define INTC_IRQ_LINE(IRQIndex) (IRQIndex % 32)
-
- /* Function Prototypes: */
- void INTC_Init(void);
- InterruptHandlerPtr_t INTC_GetInterruptHandler(const uint_reg_t InterruptLevel);
-
- /* Inline Functions: */
- /** Registers a handler for a given interrupt group. On the AVR32 UC3 devices, interrupts are grouped by
- * peripheral. To save on SRAM used, a single ISR handles all interrupt lines within a single group - to
- * determine the exact line that has interrupted within the group ISR handler, use \ref INTC_GetGroupInterrupts().
- *
- * If multiple interrupts with the same group are registered, the last registered handler will become the
- * handler called for interrupts raised within that group.
- *
- * To obtain the group number of a specific interrupt index, use the \ref INTC_IRQ_GROUP() macro.
- *
- * \param[in] GroupNumber Group number of the interrupt group to register a handler for.
- * \param[in] InterruptLevel Priority level for the specified interrupt, a \c AVR32_INTC_INT* mask.
- * \param[in] Handler Address of the ISR handler for the interrupt group.
- */
- static inline void INTC_RegisterGroupHandler(const uint16_t GroupNumber,
- const uint8_t InterruptLevel,
- const InterruptHandlerPtr_t Handler) ATTR_ALWAYS_INLINE;
- static inline void INTC_RegisterGroupHandler(const uint16_t GroupNumber,
- const uint8_t InterruptLevel,
- const InterruptHandlerPtr_t Handler)
- {
- InterruptHandlers[GroupNumber] = Handler;
- AVR32_INTC.ipr[GroupNumber] = Autovector_Table[InterruptLevel];
- }
-
- /** Retrieves the pending interrupts for a given interrupt group. The result of this function should be masked
- * against interrupt request indexes converted to a request line number via the \ref INTC_IRQ_LINE() macro. To
- * obtain the group number of a given interrupt request, use the \ref INTC_IRQ_GROUP() macro.
- *
- * \param[in] GroupNumber Group number of the interrupt group to check.
- *
- * \return Mask of pending interrupt lines for the given interrupt group.
- */
- static inline uint_reg_t INTC_GetGroupInterrupts(const uint16_t GroupNumber) ATTR_ALWAYS_INLINE;
- static inline uint_reg_t INTC_GetGroupInterrupts(const uint16_t GroupNumber)
- {
- return AVR32_INTC.irr[GroupNumber];
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Platform/XMEGA/ClockManagement.h b/protocol/lufa/LUFA-120730/LUFA/Platform/XMEGA/ClockManagement.h deleted file mode 100644 index cd9c5f49e..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Platform/XMEGA/ClockManagement.h +++ /dev/null @@ -1,397 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- * \brief Module Clock Driver for the AVR USB XMEGA microcontrollers.
- *
- * Clock management driver for the AVR USB XMEGA microcontrollers. This driver allows for the configuration
- * of the various clocks within the device to clock the various peripherals.
- */
-
-/** \ingroup Group_PlatformDrivers_XMEGA
- * \defgroup Group_PlatformDrivers_XMEGAClocks Clock Management Driver - LUFA/Platform/XMEGA/ClockManagement.h
- * \brief Module Clock Driver for the AVR USB XMEGA microcontrollers.
- *
- * \section Sec_Dependencies Module Source Dependencies
- * The following files must be built with any user project that uses this module:
- * - None
- *
- * \section Sec_ModDescription Module Description
- * Clock management driver for the AVR USB XMEGA microcontrollers. This driver allows for the configuration
- * of the various clocks within the device to clock the various peripherals.
- *
- * Usage Example:
- * \code
- * #include <LUFA/Platform/XMEGA/ClockManagement.h>
- *
- * void main(void)
- * {
- * // Start the PLL to multiply the 2MHz RC oscillator to F_CPU and switch the CPU core to run from it
- * XMEGACLK_StartPLL(CLOCK_SRC_INT_RC2MHZ, 2000000, F_CPU);
- * XMEGACLK_SetCPUClockSource(CLOCK_SRC_PLL);
- *
- * // Start the 32MHz internal RC oscillator and start the DFLL to increase it to F_USB using the USB SOF as a reference
- * XMEGACLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
- * XMEGACLK_StartDFLL(CLOCK_SRC_INT_RC32MHZ, DFLL_REF_INT_USBSOF, F_USB);
- * }
- * \endcode
- *
- * @{
- */
-
-#ifndef _XMEGA_CLOCK_MANAGEMENT_H_
-#define _XMEGA_CLOCK_MANAGEMENT_H_
-
- /* Includes: */
- #include "../../Common/Common.h"
-
- /* Enable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- extern "C" {
- #endif
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Enum for the possible external oscillator frequency ranges. */
- enum XMEGA_Extern_OSC_ClockFrequency_t
- {
- EXOSC_FREQ_2MHZ_MAX = OSC_FRQRANGE_04TO2_gc, /**< External crystal oscillator equal to or slower than 2MHz. */
- EXOSC_FREQ_9MHZ_MAX = OSC_FRQRANGE_2TO9_gc, /**< External crystal oscillator equal to or slower than 9MHz. */
- EXOSC_FREQ_12MHZ_MAX = OSC_FRQRANGE_9TO12_gc, /**< External crystal oscillator equal to or slower than 12MHz. */
- EXOSC_FREQ_16MHZ_MAX = OSC_FRQRANGE_12TO16_gc, /**< External crystal oscillator equal to or slower than 16MHz. */
- };
-
- /** Enum for the possible external oscillator startup times. */
- enum XMEGA_Extern_OSC_ClockStartup_t
- {
- EXOSC_START_6CLK = OSC_XOSCSEL_EXTCLK_gc, /**< Wait 6 clock cycles before startup (external clock). */
- EXOSC_START_32KCLK = OSC_XOSCSEL_32KHz_gc, /**< Wait 32K clock cycles before startup (32.768KHz crystal). */
- EXOSC_START_256CLK = OSC_XOSCSEL_XTAL_256CLK_gc, /**< Wait 256 clock cycles before startup. */
- EXOSC_START_1KCLK = OSC_XOSCSEL_XTAL_1KCLK_gc, /**< Wait 1K clock cycles before startup. */
- EXOSC_START_16KCLK = OSC_XOSCSEL_XTAL_16KCLK_gc, /**< Wait 16K clock cycles before startup. */
- };
-
- /** Enum for the possible module clock sources. */
- enum XMEGA_System_ClockSource_t
- {
- CLOCK_SRC_INT_RC2MHZ = 0, /**< Clock sourced from the Internal 2MHz RC Oscillator clock. */
- CLOCK_SRC_INT_RC32MHZ = 1, /**< Clock sourced from the Internal 32MHz RC Oscillator clock. */
- CLOCK_SRC_INT_RC32KHZ = 2, /**< Clock sourced from the Internal 32KHz RC Oscillator clock. */
- CLOCK_SRC_XOSC = 3, /**< Clock sourced from the External Oscillator clock. */
- CLOCK_SRC_PLL = 4, /**< Clock sourced from the Internal PLL clock. */
- };
-
- /** Enum for the possible DFLL clock reference sources. */
- enum XMEGA_System_DFLLReference_t
- {
- DFLL_REF_INT_RC32KHZ = 0, /**< Reference clock sourced from the Internal 32KHz RC Oscillator clock. */
- DFLL_REF_EXT_RC32KHZ = 1, /**< Reference clock sourced from the External 32KHz RC Oscillator clock connected to TOSC pins. */
- DFLL_REF_INT_USBSOF = 2, /**< Reference clock sourced from the USB Start Of Frame packets. */
- };
-
- /* Inline Functions: */
- /** Write a value to a location protected by the XMEGA CCP protection mechanism. This function uses inline assembly to ensure that
- * the protected address is written to within four clock cycles of the CCP key being written.
- *
- * \param[in] Address Address to write to, a memory address protected by the CCP mechanism
- * \param[in] Value Value to write to the protected location
- */
- static inline void XMEGACLK_CCP_Write(volatile void* Address, const uint8_t Value) ATTR_ALWAYS_INLINE;
- static inline void XMEGACLK_CCP_Write(volatile void* Address, const uint8_t Value)
- {
- __asm__ __volatile__ (
- "out %0, __zero_reg__" "\n\t" /* Zero RAMPZ using fixed zero value register */
- "movw r30, %1" "\n\t" /* Copy address to Z register pair */
- "out %2, %3" "\n\t" /* Write key to CCP register */
- "st Z, %4" "\n\t" /* Indirectly write value to address */
- : /* No output operands */
- : /* Input operands: */ "m" (RAMPZ), "e" (Address), "m" (CCP), "r" (CCP_IOREG_gc), "r" (Value)
- : /* Clobbered registers: */ "r30", "r31"
- );
- }
-
- /** Starts the external oscillator of the XMEGA microcontroller, with the given options. This routine blocks until
- * the oscillator is ready for use.
- *
- * \param[in] FreqRange Frequency range of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockFrequency_t.
- * \param[in] Startup Startup time of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockStartup_t.
- *
- * \return Boolean \c true if the external oscillator was successfully started, \c false if invalid parameters specified.
- */
- static inline bool XMEGACLK_StartExternalOscillator(const uint8_t FreqRange,
- const uint8_t Startup) ATTR_ALWAYS_INLINE;
- static inline bool XMEGACLK_StartExternalOscillator(const uint8_t FreqRange,
- const uint8_t Startup)
- {
- OSC.XOSCCTRL = (FreqRange | ((Startup == EXOSC_START_32KCLK) ? OSC_X32KLPM_bm : 0) | Startup);
- OSC.CTRL |= OSC_XOSCEN_bm;
-
- while (!(OSC.STATUS & OSC_XOSCRDY_bm));
- return true;
- }
-
- /** Stops the external oscillator of the XMEGA microcontroller. */
- static inline void XMEGACLK_StopExternalOscillator(void) ATTR_ALWAYS_INLINE;
- static inline void XMEGACLK_StopExternalOscillator(void)
- {
- OSC.CTRL &= ~OSC_XOSCEN_bm;
- }
-
- /** Starts the given internal oscillator of the XMEGA microcontroller, with the given options. This routine blocks until
- * the oscillator is ready for use.
- *
- * \param[in] Source Internal oscillator to start, a value from \ref XMEGA_System_ClockSource_t.
- *
- * \return Boolean \c true if the internal oscillator was successfully started, \c false if invalid parameters specified.
- */
- static inline uint8_t XMEGACLK_StartInternalOscillator(const uint8_t Source) ATTR_ALWAYS_INLINE;
- static inline uint8_t XMEGACLK_StartInternalOscillator(const uint8_t Source)
- {
- switch (Source)
- {
- case CLOCK_SRC_INT_RC2MHZ:
- OSC.CTRL |= OSC_RC2MEN_bm;
- while (!(OSC.STATUS & OSC_RC2MRDY_bm));
- return true;
- case CLOCK_SRC_INT_RC32MHZ:
- OSC.CTRL |= OSC_RC32MEN_bm;
- while (!(OSC.STATUS & OSC_RC32MRDY_bm));
- return true;
- case CLOCK_SRC_INT_RC32KHZ:
- OSC.CTRL |= OSC_RC32KEN_bm;
- while (!(OSC.STATUS & OSC_RC32KRDY_bm));
- return true;
- }
-
- return false;
- }
-
- /** Stops the given internal oscillator of the XMEGA microcontroller.
- *
- * \param[in] Source Internal oscillator to stop, a value from \ref XMEGA_System_ClockSource_t.
- *
- * \return Boolean \c true if the internal oscillator was successfully stopped, \c false if invalid parameters specified.
- */
- static inline bool XMEGACLK_StopInternalOscillator(const uint8_t Source) ATTR_ALWAYS_INLINE;
- static inline bool XMEGACLK_StopInternalOscillator(const uint8_t Source)
- {
- switch (Source)
- {
- case CLOCK_SRC_INT_RC2MHZ:
- OSC.CTRL &= ~OSC_RC2MEN_bm;
- return true;
- case CLOCK_SRC_INT_RC32MHZ:
- OSC.CTRL &= ~OSC_RC32MEN_bm;
- return true;
- case CLOCK_SRC_INT_RC32KHZ:
- OSC.CTRL &= ~OSC_RC32KEN_bm;
- return true;
- }
-
- return false;
- }
-
- /** Starts the PLL of the XMEGA microcontroller, with the given options. This routine blocks until the PLL is ready for use.
- *
- * \attention The output frequency must be equal to or greater than the source frequency.
- *
- * \param[in] Source Clock source for the PLL, a value from \ref XMEGA_System_ClockSource_t.
- * \param[in] SourceFreq Frequency of the PLL's clock source, in Hz.
- * \param[in] Frequency Target frequency of the PLL's output.
- *
- * \return Boolean \c true if the PLL was successfully started, \c false if invalid parameters specified.
- */
- static inline bool XMEGACLK_StartPLL(const uint8_t Source,
- const uint32_t SourceFreq,
- const uint32_t Frequency) ATTR_ALWAYS_INLINE;
- static inline bool XMEGACLK_StartPLL(const uint8_t Source,
- const uint32_t SourceFreq,
- const uint32_t Frequency)
- {
- uint8_t MulFactor = (Frequency / SourceFreq);
-
- if (SourceFreq > Frequency)
- return false;
-
- if (MulFactor > 31)
- return false;
-
- switch (Source)
- {
- case CLOCK_SRC_INT_RC2MHZ:
- OSC.PLLCTRL = (OSC_PLLSRC_RC2M_gc | MulFactor);
- break;
- case CLOCK_SRC_INT_RC32MHZ:
- OSC.PLLCTRL = (OSC_PLLSRC_RC32M_gc | MulFactor);
- break;
- case CLOCK_SRC_XOSC:
- OSC.PLLCTRL = (OSC_PLLSRC_XOSC_gc | MulFactor);
- break;
- default:
- return false;
- }
-
- OSC.CTRL |= OSC_PLLEN_bm;
-
- while (!(OSC.STATUS & OSC_PLLRDY_bm));
- return true;
- }
-
- /** Stops the PLL of the XMEGA microcontroller. */
- static inline void XMEGACLK_StopPLL(void) ATTR_ALWAYS_INLINE;
- static inline void XMEGACLK_StopPLL(void)
- {
- OSC.CTRL &= ~OSC_PLLEN_bm;
- }
-
- /** Starts the DFLL of the XMEGA microcontroller, with the given options.
- *
- * \param[in] Source RC Clock source for the DFLL, a value from \ref XMEGA_System_ClockSource_t.
- * \param[in] Reference Reference clock source for the DFLL, an value from \ref XMEGA_System_DFLLReference_t.
- * \param[in] Frequency Target frequency of the DFLL's output.
- *
- * \return Boolean \c true if the DFLL was successfully started, \c false if invalid parameters specified.
- */
- static inline bool XMEGACLK_StartDFLL(const uint8_t Source,
- const uint8_t Reference,
- const uint32_t Frequency) ATTR_ALWAYS_INLINE;
- static inline bool XMEGACLK_StartDFLL(const uint8_t Source,
- const uint8_t Reference,
- const uint32_t Frequency)
- {
- uint16_t DFLLCompare = (Frequency / 1000);
-
- switch (Source)
- {
- case CLOCK_SRC_INT_RC2MHZ:
- OSC.DFLLCTRL |= (Reference << OSC_RC2MCREF_bp);
- DFLLRC2M.COMP1 = (DFLLCompare & 0xFF);
- DFLLRC2M.COMP2 = (DFLLCompare >> 8);
- DFLLRC2M.CTRL = DFLL_ENABLE_bm;
- break;
- case CLOCK_SRC_INT_RC32MHZ:
- OSC.DFLLCTRL |= (Reference << OSC_RC32MCREF_gp);
- DFLLRC32M.COMP1 = (DFLLCompare & 0xFF);
- DFLLRC32M.COMP2 = (DFLLCompare >> 8);
-
- if (Reference == DFLL_REF_INT_USBSOF)
- {
- NVM.CMD = NVM_CMD_READ_CALIB_ROW_gc;
- DFLLRC32M.CALA = pgm_read_byte(offsetof(NVM_PROD_SIGNATURES_t, USBRCOSCA));
- DFLLRC32M.CALB = pgm_read_byte(offsetof(NVM_PROD_SIGNATURES_t, USBRCOSC));
- NVM.CMD = 0;
- }
-
- DFLLRC32M.CTRL = DFLL_ENABLE_bm;
- break;
- default:
- return false;
- }
-
- return true;
- }
-
- /** Stops the given DFLL of the XMEGA microcontroller.
- *
- * \param[in] Source RC Clock source for the DFLL to be stopped, a value from \ref XMEGA_System_ClockSource_t.
- *
- * \return Boolean \c true if the DFLL was successfully stopped, \c false if invalid parameters specified.
- */
- static inline bool XMEGACLK_StopDFLL(const uint8_t Source) ATTR_ALWAYS_INLINE;
- static inline bool XMEGACLK_StopDFLL(const uint8_t Source)
- {
- switch (Source)
- {
- case CLOCK_SRC_INT_RC2MHZ:
- DFLLRC2M.CTRL = 0;
- break;
- case CLOCK_SRC_INT_RC32MHZ:
- DFLLRC32M.CTRL = 0;
- break;
- default:
- return false;
- }
-
- return true;
- }
-
- /** Sets the clock source for the main microcontroller core. The given clock source should be configured
- * and ready for use before this function is called.
- *
- * \param[in] Source Clock source for the CPU core, a value from \ref XMEGA_System_ClockSource_t.
- *
- * \return Boolean \c true if the CPU core clock was successfully altered, \c false if invalid parameters specified.
- */
- static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source) ATTR_ALWAYS_INLINE;
- static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source)
- {
- uint8_t ClockSourceMask = 0;
-
- switch (Source)
- {
- case CLOCK_SRC_INT_RC2MHZ:
- ClockSourceMask = CLK_SCLKSEL_RC2M_gc;
- break;
- case CLOCK_SRC_INT_RC32MHZ:
- ClockSourceMask = CLK_SCLKSEL_RC32M_gc;
- break;
- case CLOCK_SRC_INT_RC32KHZ:
- ClockSourceMask = CLK_SCLKSEL_RC32K_gc;
- break;
- case CLOCK_SRC_XOSC:
- ClockSourceMask = CLK_SCLKSEL_XOSC_gc;
- break;
- case CLOCK_SRC_PLL:
- ClockSourceMask = CLK_SCLKSEL_PLL_gc;
- break;
- default:
- return false;
- }
-
- uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
- GlobalInterruptDisable();
-
- XMEGACLK_CCP_Write(&CLK.CTRL, ClockSourceMask);
-
- SetGlobalInterruptMask(CurrentGlobalInt);
-
- Delay_MS(1);
- return (CLK.CTRL == ClockSourceMask);
- }
-
- /* Disable C linkage for C++ Compilers: */
- #if defined(__cplusplus)
- }
- #endif
-
-#endif
-
-/** @} */
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/Version.h b/protocol/lufa/LUFA-120730/LUFA/Version.h deleted file mode 100644 index 29b5020f6..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/Version.h +++ /dev/null @@ -1,52 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2012.
-
- dean [at] fourwalledcubicle [dot] com
- www.lufa-lib.org
-*/
-
-/*
- Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, distribute, and sell this
- software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
- all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * \brief LUFA library version constants.
- *
- * Version constants for informational purposes and version-specific macro creation. This header file contains the
- * current LUFA version number in several forms, for use in the user-application (for example, for printing out
- * whilst debugging, or for testing for version compatibility).
- */
-
-#ifndef __LUFA_VERSION_H__
-#define __LUFA_VERSION_H__
-
- /* Public Interface - May be used in end-application: */
- /* Macros: */
- /** Indicates the version number of the library, as an integer. */
- #define LUFA_VERSION_INTEGER 0x120730
-
- /** Indicates the version number of the library, as a string. */
- #define LUFA_VERSION_STRING "120730"
-
-#endif
-
diff --git a/protocol/lufa/LUFA-120730/LUFA/makefile b/protocol/lufa/LUFA-120730/LUFA/makefile deleted file mode 100644 index fcf46bf68..000000000 --- a/protocol/lufa/LUFA-120730/LUFA/makefile +++ /dev/null @@ -1,50 +0,0 @@ -#
-# LUFA Library
-# Copyright (C) Dean Camera, 2012.
-#
-# dean [at] fourwalledcubicle [dot] com
-# www.lufa-lib.org
-#
-# ---------------------------------------
-# Makefile for the LUFA library itself.
-# ---------------------------------------
-
-LUFA_VERSION_NUM := $(shell grep LUFA_VERSION_STRING Version.h | cut -d'"' -f2)
-EXCLUDE_FROM_EXPORT := Documentation DoxygenPages CodeTemplates Build *.conf *.tar *.o *.d *.lss *.lst *.hex *.elf *.hex *.eep *.map *.bin
-
-all:
-
-export_tar:
- @echo Exporting LUFA library to a TAR archive...
- @tar -cf LUFA_$(LUFA_VERSION_NUM).tar --directory=. $(EXCLUDE_FROM_EXPORT:%=--exclude=%) *
- @tar -cf LUFA_$(LUFA_VERSION_NUM)_Code_Templates.tar CodeTemplates
- @echo Export LUFA_$(LUFA_VERSION_NUM).tar complete.
-
-version:
- @echo "LUFA $(LUFA_VERSION_NUM)"
-
-# Check if this is being included from a legacy or non LUFA build system makefile
-ifneq ($(LUFA_PATH),)
- LUFA_ROOT_PATH = $(patsubst %/,%,$(LUFA_PATH))/LUFA/
-
- include $(patsubst %/,%,$(LUFA_PATH))/LUFA/Build/lufa.sources.in
-else
- LUFA_BUILD_MODULES += MASTER
- LUFA_BUILD_TARGETS += export_tar version
-
- LUFA_PATH = .
- ARCH = {AVR8,UC3,XMEGA}
- DOXYGEN_OVERRIDE_PARAMS = QUIET=YES PROJECT_NUMBER=$(LUFA_VERSION_NUM)
-
- clean:
- rm -f $(LUFA_SRC_ALL_FILES:%.c=%.o)
- rm -f $(LUFA_SRC_ALL_FILES:%.c=%.d)
- rm -f $(LUFA_SRC_ALL_FILES:%.c=%.lst)
-
- include Build/lufa_core.mk
- include Build/lufa_sources.mk
- include Build/lufa_doxygen.mk
-endif
-
-
-.PHONY: all export_tar version clean
\ No newline at end of file diff --git a/protocol/lufa/LUFA-120730/README.txt b/protocol/lufa/LUFA-120730/README.txt deleted file mode 100644 index aacb4af9a..000000000 --- a/protocol/lufa/LUFA-120730/README.txt +++ /dev/null @@ -1,56 +0,0 @@ -
- _ _ _ ___ _
- | | | | | __/ \
- | |_| U | _| o | - The Lightweight USB
- |___|___|_||_n_| Framework for AVRs
- =========================================
- Written by Dean Camera
- dean [at] fourwalledcubicle [dot] com
-
- http://www.lufa-lib.org
- =========================================
-
- LUFA is donation supported. To support LUFA,
- please donate at http://www.lufa-lib.org/donate
-
- Released under a modified MIT license - see
- LUFA/License.txt for license details.
-
- For Commercial Licensing information, see
- http://www.lufa-lib.org/license
-
-
-This package contains the complete LUFA library, demos, user-submitted
-projects and bootloaders for use with compatible microcontroller models.
-LUFA is a simple to use, lightweight framework which sits atop the hardware
-USB controller in specific AVR microcontroller models, and allows for the
-quick and easy creation of complex USB devices and hosts.
-
-To get started, you will need to install the "Doxygen" documentation
-generation tool. If you use Linux, this can be installed via the "doxygen"
-package in your chosen package management tool - under Ubuntu, this can be
-achieved by running the following command in the terminal:
-
- sudo apt-get install doxygen
-
-Other package managers and distributions will have similar methods to
-install Doxygen. In Windows, you can download a prebuilt installer for
-Doxygen from its website, www.doxygen.org.
-
-Once installed, you can then use the Doxygen tool to generate the library
-documentation from the command line or terminal of your operating system. To
-do this, open your terminal or command line to the root directory of the
-LUFA package, and type the following command:
-
- make doxygen
-
-Which will recursively generate documentation for all elements in the
-library - the core, plus all demos, projects and bootloaders. Generated
-documentation will then be available by opening the file "index.html" of the
-created Documentation/html/ subdirectories inside each project folder.
-
-The documentation for the library itself (but not the documentation for the
-individual demos, projects or bootloaders) is also available as a separate
-package from the project webpage for convenience if Doxygen cannot be
-installed.
-
diff --git a/protocol/lufa/LUFA-git b/protocol/lufa/LUFA-git deleted file mode 160000 -Subproject b6c18b2a7c544653efbe12a1d4e8ba65e7d83c3 diff --git a/protocol/lufa/descriptor.c b/protocol/lufa/descriptor.c deleted file mode 100644 index c13a81bda..000000000 --- a/protocol/lufa/descriptor.c +++ /dev/null @@ -1,630 +0,0 @@ -/* - * Copyright 2012 Jun Wako <wakojun@gmail.com> - * This file is based on: - * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse - * LUFA-120219/Demos/Device/Lowlevel/GenericHID - */ - -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "util.h" -#include "report.h" -#include "descriptor.h" - - -/******************************************************************************* - * HID Report Descriptors - ******************************************************************************/ -const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] = -{ - HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */ - HID_RI_USAGE(8, 0x06), /* Keyboard */ - HID_RI_COLLECTION(8, 0x01), /* Application */ - HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */ - HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */ - HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */ - HID_RI_LOGICAL_MINIMUM(8, 0x00), - HID_RI_LOGICAL_MAXIMUM(8, 0x01), - HID_RI_REPORT_COUNT(8, 0x08), - HID_RI_REPORT_SIZE(8, 0x01), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), - - HID_RI_REPORT_COUNT(8, 0x01), - HID_RI_REPORT_SIZE(8, 0x08), - HID_RI_INPUT(8, HID_IOF_CONSTANT), /* reserved */ - - HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */ - HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */ - HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */ - HID_RI_REPORT_COUNT(8, 0x05), - HID_RI_REPORT_SIZE(8, 0x01), - HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), - HID_RI_REPORT_COUNT(8, 0x01), - HID_RI_REPORT_SIZE(8, 0x03), - HID_RI_OUTPUT(8, HID_IOF_CONSTANT), - - HID_RI_USAGE_PAGE(8, 0x07), /* Keyboard */ - HID_RI_USAGE_MINIMUM(8, 0x00), /* Reserved (no event indicated) */ - HID_RI_USAGE_MAXIMUM(8, 0xFF), /* Keyboard Application */ - HID_RI_LOGICAL_MINIMUM(8, 0x00), - HID_RI_LOGICAL_MAXIMUM(8, 0xFF), - HID_RI_REPORT_COUNT(8, 0x06), - HID_RI_REPORT_SIZE(8, 0x08), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE), - HID_RI_END_COLLECTION(0), -}; - -#ifdef MOUSE_ENABLE -const USB_Descriptor_HIDReport_Datatype_t PROGMEM MouseReport[] = -{ - HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */ - HID_RI_USAGE(8, 0x02), /* Mouse */ - HID_RI_COLLECTION(8, 0x01), /* Application */ - HID_RI_USAGE(8, 0x01), /* Pointer */ - HID_RI_COLLECTION(8, 0x00), /* Physical */ - - HID_RI_USAGE_PAGE(8, 0x09), /* Button */ - HID_RI_USAGE_MINIMUM(8, 0x01), /* Button 1 */ - HID_RI_USAGE_MAXIMUM(8, 0x05), /* Button 5 */ - HID_RI_LOGICAL_MINIMUM(8, 0x00), - HID_RI_LOGICAL_MAXIMUM(8, 0x01), - HID_RI_REPORT_COUNT(8, 0x05), - HID_RI_REPORT_SIZE(8, 0x01), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), - HID_RI_REPORT_COUNT(8, 0x01), - HID_RI_REPORT_SIZE(8, 0x03), - HID_RI_INPUT(8, HID_IOF_CONSTANT), - - HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */ - HID_RI_USAGE(8, 0x30), /* Usage X */ - HID_RI_USAGE(8, 0x31), /* Usage Y */ - HID_RI_LOGICAL_MINIMUM(8, -127), - HID_RI_LOGICAL_MAXIMUM(8, 127), - HID_RI_REPORT_COUNT(8, 0x02), - HID_RI_REPORT_SIZE(8, 0x08), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE), - - HID_RI_USAGE(8, 0x38), /* Wheel */ - HID_RI_LOGICAL_MINIMUM(8, -127), - HID_RI_LOGICAL_MAXIMUM(8, 127), - HID_RI_REPORT_COUNT(8, 0x01), - HID_RI_REPORT_SIZE(8, 0x08), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE), - - HID_RI_USAGE_PAGE(8, 0x0C), /* Consumer */ - HID_RI_USAGE(16, 0x0238), /* AC Pan (Horizontal wheel) */ - HID_RI_LOGICAL_MINIMUM(8, -127), - HID_RI_LOGICAL_MAXIMUM(8, 127), - HID_RI_REPORT_COUNT(8, 0x01), - HID_RI_REPORT_SIZE(8, 0x08), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_RELATIVE), - - HID_RI_END_COLLECTION(0), - HID_RI_END_COLLECTION(0), -}; -#endif - -#ifdef EXTRAKEY_ENABLE -const USB_Descriptor_HIDReport_Datatype_t PROGMEM ExtrakeyReport[] = -{ - HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */ - HID_RI_USAGE(8, 0x80), /* System Control */ - HID_RI_COLLECTION(8, 0x01), /* Application */ - HID_RI_REPORT_ID(8, REPORT_ID_SYSTEM), - HID_RI_LOGICAL_MINIMUM(16, 0x0001), - HID_RI_LOGICAL_MAXIMUM(16, 0x00B7), - HID_RI_USAGE_MINIMUM(16, 0x0001), /* System Power Down */ - HID_RI_USAGE_MAXIMUM(16, 0x00B7), /* System Display LCD Autoscale */ - HID_RI_REPORT_SIZE(8, 16), - HID_RI_REPORT_COUNT(8, 1), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE), - HID_RI_END_COLLECTION(0), - - HID_RI_USAGE_PAGE(8, 0x0C), /* Consumer */ - HID_RI_USAGE(8, 0x01), /* Consumer Control */ - HID_RI_COLLECTION(8, 0x01), /* Application */ - HID_RI_REPORT_ID(8, REPORT_ID_CONSUMER), - HID_RI_LOGICAL_MINIMUM(16, 0x0001), - HID_RI_LOGICAL_MAXIMUM(16, 0x029C), - HID_RI_USAGE_MINIMUM(16, 0x0001), /* +10 */ - HID_RI_USAGE_MAXIMUM(16, 0x029C), /* AC Distribute Vertically */ - HID_RI_REPORT_SIZE(8, 16), - HID_RI_REPORT_COUNT(8, 1), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_ARRAY | HID_IOF_ABSOLUTE), - HID_RI_END_COLLECTION(0), -}; -#endif - -#ifdef CONSOLE_ENABLE -const USB_Descriptor_HIDReport_Datatype_t PROGMEM ConsoleReport[] = -{ - HID_RI_USAGE_PAGE(16, 0xFF31), /* Vendor Page(PJRC Teensy compatible) */ - HID_RI_USAGE(8, 0x74), /* Vendor Usage(PJRC Teensy compatible) */ - HID_RI_COLLECTION(8, 0x01), /* Application */ - HID_RI_USAGE(8, 0x75), /* Vendor Usage 0x75 */ - HID_RI_LOGICAL_MINIMUM(8, 0x00), - HID_RI_LOGICAL_MAXIMUM(8, 0xFF), - HID_RI_REPORT_COUNT(8, CONSOLE_EPSIZE), - HID_RI_REPORT_SIZE(8, 0x08), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), - HID_RI_USAGE(8, 0x76), /* Vendor Usage 0x76 */ - HID_RI_LOGICAL_MINIMUM(8, 0x00), - HID_RI_LOGICAL_MAXIMUM(8, 0xFF), - HID_RI_REPORT_COUNT(8, CONSOLE_EPSIZE), - HID_RI_REPORT_SIZE(8, 0x08), - HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), - HID_RI_END_COLLECTION(0), -}; -#endif - -#ifdef NKRO_ENABLE -const USB_Descriptor_HIDReport_Datatype_t PROGMEM NKROReport[] = -{ - HID_RI_USAGE_PAGE(8, 0x01), /* Generic Desktop */ - HID_RI_USAGE(8, 0x06), /* Keyboard */ - HID_RI_COLLECTION(8, 0x01), /* Application */ - HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */ - HID_RI_USAGE_MINIMUM(8, 0xE0), /* Keyboard Left Control */ - HID_RI_USAGE_MAXIMUM(8, 0xE7), /* Keyboard Right GUI */ - HID_RI_LOGICAL_MINIMUM(8, 0x00), - HID_RI_LOGICAL_MAXIMUM(8, 0x01), - HID_RI_REPORT_COUNT(8, 0x08), - HID_RI_REPORT_SIZE(8, 0x01), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), - - HID_RI_USAGE_PAGE(8, 0x08), /* LEDs */ - HID_RI_USAGE_MINIMUM(8, 0x01), /* Num Lock */ - HID_RI_USAGE_MAXIMUM(8, 0x05), /* Kana */ - HID_RI_REPORT_COUNT(8, 0x05), - HID_RI_REPORT_SIZE(8, 0x01), - HID_RI_OUTPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE | HID_IOF_NON_VOLATILE), - HID_RI_REPORT_COUNT(8, 0x01), - HID_RI_REPORT_SIZE(8, 0x03), - HID_RI_OUTPUT(8, HID_IOF_CONSTANT), - - HID_RI_USAGE_PAGE(8, 0x07), /* Key Codes */ - HID_RI_USAGE_MINIMUM(8, 0x00), /* Keyboard 0 */ - HID_RI_USAGE_MAXIMUM(8, (NKRO_EPSIZE-1)*8-1), /* Keyboard Right GUI */ - HID_RI_LOGICAL_MINIMUM(8, 0x00), - HID_RI_LOGICAL_MAXIMUM(8, 0x01), - HID_RI_REPORT_COUNT(8, (NKRO_EPSIZE-1)*8), - HID_RI_REPORT_SIZE(8, 0x01), - HID_RI_INPUT(8, HID_IOF_DATA | HID_IOF_VARIABLE | HID_IOF_ABSOLUTE), - HID_RI_END_COLLECTION(0), -}; -#endif - -/******************************************************************************* - * Device Descriptors - ******************************************************************************/ -const USB_Descriptor_Device_t PROGMEM DeviceDescriptor = -{ - .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device}, - - .USBSpecification = VERSION_BCD(1,1,0), - .Class = USB_CSCP_NoDeviceClass, - .SubClass = USB_CSCP_NoDeviceSubclass, - .Protocol = USB_CSCP_NoDeviceProtocol, - - .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE, - - /* specified in config.h */ - .VendorID = VENDOR_ID, - .ProductID = PRODUCT_ID, - .ReleaseNumber = DEVICE_VER, - - .ManufacturerStrIndex = 0x01, - .ProductStrIndex = 0x02, - .SerialNumStrIndex = NO_DESCRIPTOR, - - .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS -}; - -/******************************************************************************* - * Configuration Descriptors - ******************************************************************************/ -const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor = -{ - .Config = - { - .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration}, - - .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t), - .TotalInterfaces = TOTAL_INTERFACES, - - .ConfigurationNumber = 1, - .ConfigurationStrIndex = NO_DESCRIPTOR, - - .ConfigAttributes = (USB_CONFIG_ATTR_RESERVED | USB_CONFIG_ATTR_REMOTEWAKEUP), - - .MaxPowerConsumption = USB_CONFIG_POWER_MA(100) - }, - - /* - * Keyboard - */ - .Keyboard_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = KEYBOARD_INTERFACE, - .AlternateSetting = 0x00, - - .TotalEndpoints = 1, - - .Class = HID_CSCP_HIDClass, - .SubClass = HID_CSCP_BootSubclass, - .Protocol = HID_CSCP_KeyboardBootProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .Keyboard_HID = - { - .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - - .HIDSpec = VERSION_BCD(1,1,1), - .CountryCode = 0x00, - .TotalReportDescriptors = 1, - .HIDReportType = HID_DTYPE_Report, - .HIDReportLength = sizeof(KeyboardReport) - }, - - .Keyboard_INEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = (ENDPOINT_DIR_IN | KEYBOARD_IN_EPNUM), - .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = KEYBOARD_EPSIZE, - .PollingIntervalMS = 0x0A - }, - - /* - * Mouse - */ -#ifdef MOUSE_ENABLE - .Mouse_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = MOUSE_INTERFACE, - .AlternateSetting = 0x00, - - .TotalEndpoints = 1, - - .Class = HID_CSCP_HIDClass, - .SubClass = HID_CSCP_BootSubclass, - .Protocol = HID_CSCP_MouseBootProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .Mouse_HID = - { - .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - - .HIDSpec = VERSION_BCD(1,1,1), - .CountryCode = 0x00, - .TotalReportDescriptors = 1, - .HIDReportType = HID_DTYPE_Report, - .HIDReportLength = sizeof(MouseReport) - }, - - .Mouse_INEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = (ENDPOINT_DIR_IN | MOUSE_IN_EPNUM), - .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = MOUSE_EPSIZE, - .PollingIntervalMS = 0x0A - }, -#endif - - /* - * Extra - */ -#ifdef EXTRAKEY_ENABLE - .Extrakey_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = EXTRAKEY_INTERFACE, - .AlternateSetting = 0x00, - - .TotalEndpoints = 1, - - .Class = HID_CSCP_HIDClass, - .SubClass = HID_CSCP_NonBootSubclass, - .Protocol = HID_CSCP_NonBootProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .Extrakey_HID = - { - .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - - .HIDSpec = VERSION_BCD(1,1,1), - .CountryCode = 0x00, - .TotalReportDescriptors = 1, - .HIDReportType = HID_DTYPE_Report, - .HIDReportLength = sizeof(ExtrakeyReport) - }, - - .Extrakey_INEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = (ENDPOINT_DIR_IN | EXTRAKEY_IN_EPNUM), - .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = EXTRAKEY_EPSIZE, - .PollingIntervalMS = 0x0A - }, -#endif - - /* - * Console - */ -#ifdef CONSOLE_ENABLE - .Console_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = CONSOLE_INTERFACE, - .AlternateSetting = 0x00, - - .TotalEndpoints = 2, - - .Class = HID_CSCP_HIDClass, - .SubClass = HID_CSCP_NonBootSubclass, - .Protocol = HID_CSCP_NonBootProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .Console_HID = - { - .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - - .HIDSpec = VERSION_BCD(1,1,1), - .CountryCode = 0x00, - .TotalReportDescriptors = 1, - .HIDReportType = HID_DTYPE_Report, - .HIDReportLength = sizeof(ConsoleReport) - }, - - .Console_INEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = (ENDPOINT_DIR_IN | CONSOLE_IN_EPNUM), - .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = CONSOLE_EPSIZE, - .PollingIntervalMS = 0x01 - }, - - .Console_OUTEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = (ENDPOINT_DIR_OUT | CONSOLE_OUT_EPNUM), - .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = CONSOLE_EPSIZE, - .PollingIntervalMS = 0x01 - }, -#endif - - /* - * NKRO - */ -#ifdef NKRO_ENABLE - .NKRO_Interface = - { - .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface}, - - .InterfaceNumber = NKRO_INTERFACE, - .AlternateSetting = 0x00, - - .TotalEndpoints = 1, - - .Class = HID_CSCP_HIDClass, - .SubClass = HID_CSCP_NonBootSubclass, - .Protocol = HID_CSCP_NonBootProtocol, - - .InterfaceStrIndex = NO_DESCRIPTOR - }, - - .NKRO_HID = - { - .Header = {.Size = sizeof(USB_HID_Descriptor_HID_t), .Type = HID_DTYPE_HID}, - - .HIDSpec = VERSION_BCD(1,1,1), - .CountryCode = 0x00, - .TotalReportDescriptors = 1, - .HIDReportType = HID_DTYPE_Report, - .HIDReportLength = sizeof(NKROReport) - }, - - .NKRO_INEndpoint = - { - .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint}, - - .EndpointAddress = (ENDPOINT_DIR_IN | NKRO_IN_EPNUM), - .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA), - .EndpointSize = NKRO_EPSIZE, - .PollingIntervalMS = 0x01 - }, -#endif -}; - - -/******************************************************************************* - * String Descriptors - ******************************************************************************/ -const USB_Descriptor_String_t PROGMEM LanguageString = -{ - .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String}, - - .UnicodeString = {LANGUAGE_ID_ENG} -}; - -const USB_Descriptor_String_t PROGMEM ManufacturerString = -{ - /* subtract 1 for null terminator */ - .Header = {.Size = USB_STRING_LEN(sizeof(STR(MANUFACTURER))-1), .Type = DTYPE_String}, - - .UnicodeString = LSTR(MANUFACTURER) -}; - -const USB_Descriptor_String_t PROGMEM ProductString = -{ - /* subtract 1 for null terminator */ - .Header = {.Size = USB_STRING_LEN(sizeof(STR(PRODUCT))-1), .Type = DTYPE_String}, - - .UnicodeString = LSTR(PRODUCT) -}; - - -/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors" - * documentation) by the application code so that the address and size of a requested descriptor can be given - * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function - * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the - * USB host. - */ -uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint8_t wIndex, - const void** const DescriptorAddress) -{ - const uint8_t DescriptorType = (wValue >> 8); - const uint8_t DescriptorIndex = (wValue & 0xFF); - - const void* Address = NULL; - uint16_t Size = NO_DESCRIPTOR; - - switch (DescriptorType) - { - case DTYPE_Device: - Address = &DeviceDescriptor; - Size = sizeof(USB_Descriptor_Device_t); - break; - case DTYPE_Configuration: - Address = &ConfigurationDescriptor; - Size = sizeof(USB_Descriptor_Configuration_t); - break; - case DTYPE_String: - switch (DescriptorIndex ) - { - case 0x00: - Address = &LanguageString; - Size = pgm_read_byte(&LanguageString.Header.Size); - break; - case 0x01: - Address = &ManufacturerString; - Size = pgm_read_byte(&ManufacturerString.Header.Size); - break; - case 0x02: - Address = &ProductString; - Size = pgm_read_byte(&ProductString.Header.Size); - break; - } - break; - case HID_DTYPE_HID: - switch (wIndex) { - case KEYBOARD_INTERFACE: - Address = &ConfigurationDescriptor.Keyboard_HID; - Size = sizeof(USB_HID_Descriptor_HID_t); - break; -#ifdef MOUSE_ENABLE - case MOUSE_INTERFACE: - Address = &ConfigurationDescriptor.Mouse_HID; - Size = sizeof(USB_HID_Descriptor_HID_t); - break; -#endif -#ifdef EXTRAKEY_ENABLE - case EXTRAKEY_INTERFACE: - Address = &ConfigurationDescriptor.Extrakey_HID; - Size = sizeof(USB_HID_Descriptor_HID_t); - break; -#endif -#ifdef CONSOLE_ENABLE - case CONSOLE_INTERFACE: - Address = &ConfigurationDescriptor.Console_HID; - Size = sizeof(USB_HID_Descriptor_HID_t); - break; -#endif -#ifdef NKRO_ENABLE - case NKRO_INTERFACE: - Address = &ConfigurationDescriptor.NKRO_HID; - Size = sizeof(USB_HID_Descriptor_HID_t); - break; -#endif - } - break; - case HID_DTYPE_Report: - switch (wIndex) { - case KEYBOARD_INTERFACE: - Address = &KeyboardReport; - Size = sizeof(KeyboardReport); - break; -#ifdef MOUSE_ENABLE - case MOUSE_INTERFACE: - Address = &MouseReport; - Size = sizeof(MouseReport); - break; -#endif -#ifdef EXTRAKEY_ENABLE - case EXTRAKEY_INTERFACE: - Address = &ExtrakeyReport; - Size = sizeof(ExtrakeyReport); - break; -#endif -#ifdef CONSOLE_ENABLE - case CONSOLE_INTERFACE: - Address = &ConsoleReport; - Size = sizeof(ConsoleReport); - break; -#endif -#ifdef NKRO_ENABLE - case NKRO_INTERFACE: - Address = &NKROReport; - Size = sizeof(NKROReport); - break; -#endif - } - break; - } - - *DescriptorAddress = Address; - return Size; -} diff --git a/protocol/lufa/descriptor.h b/protocol/lufa/descriptor.h deleted file mode 100644 index 42af07917..000000000 --- a/protocol/lufa/descriptor.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * Copyright 2012,2013 Jun Wako <wakojun@gmail.com> - * This file is based on: - * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse - * LUFA-120219/Demos/Device/Lowlevel/GenericHID - */ - -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -/** \file - * - * Header file for Descriptors.c. - */ - -#ifndef _DESCRIPTORS_H_ -#define _DESCRIPTORS_H_ - -#include <LUFA/Drivers/USB/USB.h> -#include <avr/pgmspace.h> - - -typedef struct -{ - USB_Descriptor_Configuration_Header_t Config; - - // Keyboard HID Interface - USB_Descriptor_Interface_t Keyboard_Interface; - USB_HID_Descriptor_HID_t Keyboard_HID; - USB_Descriptor_Endpoint_t Keyboard_INEndpoint; - -#ifdef MOUSE_ENABLE - // Mouse HID Interface - USB_Descriptor_Interface_t Mouse_Interface; - USB_HID_Descriptor_HID_t Mouse_HID; - USB_Descriptor_Endpoint_t Mouse_INEndpoint; -#endif - -#ifdef EXTRAKEY_ENABLE - // Extrakey HID Interface - USB_Descriptor_Interface_t Extrakey_Interface; - USB_HID_Descriptor_HID_t Extrakey_HID; - USB_Descriptor_Endpoint_t Extrakey_INEndpoint; -#endif - -#ifdef CONSOLE_ENABLE - // Console HID Interface - USB_Descriptor_Interface_t Console_Interface; - USB_HID_Descriptor_HID_t Console_HID; - USB_Descriptor_Endpoint_t Console_INEndpoint; - USB_Descriptor_Endpoint_t Console_OUTEndpoint; -#endif - -#ifdef NKRO_ENABLE - // NKRO HID Interface - USB_Descriptor_Interface_t NKRO_Interface; - USB_HID_Descriptor_HID_t NKRO_HID; - USB_Descriptor_Endpoint_t NKRO_INEndpoint; -#endif -} USB_Descriptor_Configuration_t; - - -/* index of interface */ -#define KEYBOARD_INTERFACE 0 - -#ifdef MOUSE_ENABLE -# define MOUSE_INTERFACE (KEYBOARD_INTERFACE + 1) -#else -# define MOUSE_INTERFACE KEYBOARD_INTERFACE -#endif - -#ifdef EXTRAKEY_ENABLE -# define EXTRAKEY_INTERFACE (MOUSE_INTERFACE + 1) -#else -# define EXTRAKEY_INTERFACE MOUSE_INTERFACE -#endif - -#ifdef CONSOLE_ENABLE -# define CONSOLE_INTERFACE (EXTRAKEY_INTERFACE + 1) -#else -# define CONSOLE_INTERFACE EXTRAKEY_INTERFACE -#endif - -#ifdef NKRO_ENABLE -# define NKRO_INTERFACE (CONSOLE_INTERFACE + 1) -#else -# define NKRO_INTERFACE CONSOLE_INTERFACE -#endif - - -/* nubmer of interfaces */ -#define TOTAL_INTERFACES (NKRO_INTERFACE + 1) - - -// Endopoint number and size -#define KEYBOARD_IN_EPNUM 1 - -#ifdef MOUSE_ENABLE -# define MOUSE_IN_EPNUM (KEYBOARD_IN_EPNUM + 1) -#else -# define MOUSE_IN_EPNUM KEYBOARD_IN_EPNUM -#endif - -#ifdef EXTRAKEY_ENABLE -# define EXTRAKEY_IN_EPNUM (MOUSE_IN_EPNUM + 1) -#else -# define EXTRAKEY_IN_EPNUM MOUSE_IN_EPNUM -#endif - -#ifdef CONSOLE_ENABLE -# define CONSOLE_IN_EPNUM (EXTRAKEY_IN_EPNUM + 1) -# define CONSOLE_OUT_EPNUM (EXTRAKEY_IN_EPNUM + 1) -//# define CONSOLE_OUT_EPNUM (EXTRAKEY_IN_EPNUM + 2) -#else -# define CONSOLE_OUT_EPNUM EXTRAKEY_IN_EPNUM -#endif - -#ifdef NKRO_ENABLE -# define NKRO_IN_EPNUM (CONSOLE_OUT_EPNUM + 1) -# if defined(__AVR_ATmega32U2__) && NKRO_IN_EPNUM > 4 -# error "Endpoints are not available enough to support all functions. Remove some in Makefile.(MOUSEKEY, EXTRAKEY, CONSOLE, NKRO)" -# endif -#endif - - -#define KEYBOARD_EPSIZE 8 -#define MOUSE_EPSIZE 8 -#define EXTRAKEY_EPSIZE 8 -#define CONSOLE_EPSIZE 32 -#define NKRO_EPSIZE 16 - - -uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, - const uint8_t wIndex, - const void** const DescriptorAddress) - ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(3); - - -/* new API */ -#if LUFA_VERSION_INTEGER < 0x140302 - #undef VERSION_BCD - #define VERSION_BCD(Major, Minor, Revision) \ - CPU_TO_LE16( ((Major & 0xFF) << 8) | \ - ((Minor & 0x0F) << 4) | \ - (Revision & 0x0F) ) -#endif - -#endif diff --git a/protocol/lufa/lufa.c b/protocol/lufa/lufa.c deleted file mode 100644 index cdfc7bc6a..000000000 --- a/protocol/lufa/lufa.c +++ /dev/null @@ -1,605 +0,0 @@ -/* - * Copyright 2012 Jun Wako <wakojun@gmail.com> - * This file is based on: - * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse - * LUFA-120219/Demos/Device/Lowlevel/GenericHID - */ - -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#include "report.h" -#include "host.h" -#include "host_driver.h" -#include "keyboard.h" -#include "action.h" -#include "led.h" -#include "sendchar.h" -#include "debug.h" -#ifdef SLEEP_LED_ENABLE -#include "sleep_led.h" -#endif -#include "suspend.h" - -#include "descriptor.h" -#include "lufa.h" - -uint8_t keyboard_idle = 0; -uint8_t keyboard_protocol = 1; -static uint8_t keyboard_led_stats = 0; - -static report_keyboard_t keyboard_report_sent; - - -/* Host driver */ -static uint8_t keyboard_leds(void); -static void send_keyboard(report_keyboard_t *report); -static void send_mouse(report_mouse_t *report); -static void send_system(uint16_t data); -static void send_consumer(uint16_t data); -host_driver_t lufa_driver = { - keyboard_leds, - send_keyboard, - send_mouse, - send_system, - send_consumer -}; - - -/******************************************************************************* - * Console - ******************************************************************************/ -#ifdef CONSOLE_ENABLE -static void Console_Task(void) -{ - /* Device must be connected and configured for the task to run */ - if (USB_DeviceState != DEVICE_STATE_Configured) - return; - - uint8_t ep = Endpoint_GetCurrentEndpoint(); - -#if 0 - // TODO: impl receivechar()/recvchar() - Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM); - - /* Check to see if a packet has been sent from the host */ - if (Endpoint_IsOUTReceived()) - { - /* Check to see if the packet contains data */ - if (Endpoint_IsReadWriteAllowed()) - { - /* Create a temporary buffer to hold the read in report from the host */ - uint8_t ConsoleData[CONSOLE_EPSIZE]; - - /* Read Console Report Data */ - Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL); - - /* Process Console Report Data */ - //ProcessConsoleHIDReport(ConsoleData); - } - - /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearOUT(); - } -#endif - - /* IN packet */ - Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM); - if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) { - Endpoint_SelectEndpoint(ep); - return; - } - - // fill empty bank - while (Endpoint_IsReadWriteAllowed()) - Endpoint_Write_8(0); - - // flash senchar packet - if (Endpoint_IsINReady()) { - Endpoint_ClearIN(); - } - - Endpoint_SelectEndpoint(ep); -} -#else -static void Console_Task(void) -{ -} -#endif - - -/******************************************************************************* - * USB Events - ******************************************************************************/ -/* - * Event Order of Plug in: - * 0) EVENT_USB_Device_Connect - * 1) EVENT_USB_Device_Suspend - * 2) EVENT_USB_Device_Reset - * 3) EVENT_USB_Device_Wake -*/ -void EVENT_USB_Device_Connect(void) -{ - print("[C]"); - /* For battery powered device */ - if (!USB_IsInitialized) { - USB_Disable(); - USB_Init(); - USB_Device_EnableSOFEvents(); - } -} - -void EVENT_USB_Device_Disconnect(void) -{ - print("[D]"); - /* For battery powered device */ - USB_IsInitialized = false; -/* TODO: This doesn't work. After several plug in/outs can not be enumerated. - if (USB_IsInitialized) { - USB_Disable(); // Disable all interrupts - USB_Controller_Enable(); - USB_INT_Enable(USB_INT_VBUSTI); - } -*/ -} - -void EVENT_USB_Device_Reset(void) -{ - print("[R]"); -} - -void EVENT_USB_Device_Suspend() -{ - print("[S]"); - matrix_power_down(); -#ifdef SLEEP_LED_ENABLE - sleep_led_enable(); -#endif -} - -void EVENT_USB_Device_WakeUp() -{ - print("[W]"); - suspend_wakeup_init(); - -#ifdef SLEEP_LED_ENABLE - sleep_led_disable(); - // NOTE: converters may not accept this - led_set(host_keyboard_leds()); -#endif -} - -void EVENT_USB_Device_StartOfFrame(void) -{ - Console_Task(); -} - -/** Event handler for the USB_ConfigurationChanged event. - * This is fired when the host sets the current configuration of the USB device after enumeration. - */ -void EVENT_USB_Device_ConfigurationChanged(void) -{ - bool ConfigSuccess = true; - - /* Setup Keyboard HID Report Endpoints */ - ConfigSuccess &= ENDPOINT_CONFIG(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE); - -#ifdef MOUSE_ENABLE - /* Setup Mouse HID Report Endpoint */ - ConfigSuccess &= ENDPOINT_CONFIG(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE); -#endif - -#ifdef EXTRAKEY_ENABLE - /* Setup Extra HID Report Endpoint */ - ConfigSuccess &= ENDPOINT_CONFIG(EXTRAKEY_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - EXTRAKEY_EPSIZE, ENDPOINT_BANK_SINGLE); -#endif - -#ifdef CONSOLE_ENABLE - /* Setup Console HID Report Endpoints */ - ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - CONSOLE_EPSIZE, ENDPOINT_BANK_DOUBLE); -#if 0 - ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT, - CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE); -#endif -#endif - -#ifdef NKRO_ENABLE - /* Setup NKRO HID Report Endpoints */ - ConfigSuccess &= ENDPOINT_CONFIG(NKRO_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN, - NKRO_EPSIZE, ENDPOINT_BANK_SINGLE); -#endif -} - -/* -Appendix G: HID Request Support Requirements - -The following table enumerates the requests that need to be supported by various types of HID class devices. - -Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol ------------------------------------------------------------------------------------------- -Boot Mouse Required Optional Optional Optional Required Required -Non-Boot Mouse Required Optional Optional Optional Optional Optional -Boot Keyboard Required Optional Required Required Required Required -Non-Boot Keybrd Required Optional Required Required Optional Optional -Other Device Required Optional Optional Optional Optional Optional -*/ -/** Event handler for the USB_ControlRequest event. - * This is fired before passing along unhandled control requests to the library for processing internally. - */ -void EVENT_USB_Device_ControlRequest(void) -{ - uint8_t* ReportData = NULL; - uint8_t ReportSize = 0; - - /* Handle HID Class specific requests */ - switch (USB_ControlRequest.bRequest) - { - case HID_REQ_GetReport: - if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) - { - Endpoint_ClearSETUP(); - - // Interface - switch (USB_ControlRequest.wIndex) { - case KEYBOARD_INTERFACE: - // TODO: test/check - ReportData = (uint8_t*)&keyboard_report_sent; - ReportSize = sizeof(keyboard_report_sent); - break; - } - - /* Write the report data to the control endpoint */ - Endpoint_Write_Control_Stream_LE(ReportData, ReportSize); - Endpoint_ClearOUT(); - } - - break; - case HID_REQ_SetReport: - if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) - { - - // Interface - switch (USB_ControlRequest.wIndex) { - case KEYBOARD_INTERFACE: -#ifdef NKRO_ENABLE - case NKRO_INTERFACE: -#endif - Endpoint_ClearSETUP(); - - while (!(Endpoint_IsOUTReceived())) { - if (USB_DeviceState == DEVICE_STATE_Unattached) - return; - } - keyboard_led_stats = Endpoint_Read_8(); - - Endpoint_ClearOUT(); - Endpoint_ClearStatusStage(); - break; - } - - } - - break; - - case HID_REQ_GetProtocol: - if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) - { - if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) { - Endpoint_ClearSETUP(); - while (!(Endpoint_IsINReady())); - Endpoint_Write_8(keyboard_protocol); - Endpoint_ClearIN(); - Endpoint_ClearStatusStage(); - } - } - - break; - case HID_REQ_SetProtocol: - if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) - { - if (USB_ControlRequest.wIndex == KEYBOARD_INTERFACE) { - Endpoint_ClearSETUP(); - Endpoint_ClearStatusStage(); - - keyboard_protocol = ((USB_ControlRequest.wValue & 0xFF) != 0x00); -#ifdef NKRO_ENABLE - keyboard_nkro = !!keyboard_protocol; -#endif - clear_keyboard(); - } - } - - break; - case HID_REQ_SetIdle: - if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE)) - { - Endpoint_ClearSETUP(); - Endpoint_ClearStatusStage(); - - keyboard_idle = ((USB_ControlRequest.wValue & 0xFF00) >> 8); - } - - break; - case HID_REQ_GetIdle: - if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE)) - { - Endpoint_ClearSETUP(); - while (!(Endpoint_IsINReady())); - Endpoint_Write_8(keyboard_idle); - Endpoint_ClearIN(); - Endpoint_ClearStatusStage(); - } - - break; - } -} - -/******************************************************************************* - * Host driver - ******************************************************************************/ -static uint8_t keyboard_leds(void) -{ - return keyboard_led_stats; -} - -static void send_keyboard(report_keyboard_t *report) -{ - uint8_t timeout = 255; - - if (USB_DeviceState != DEVICE_STATE_Configured) - return; - - /* Select the Keyboard Report Endpoint */ -#ifdef NKRO_ENABLE - if (keyboard_nkro) { - /* Report protocol - NKRO */ - Endpoint_SelectEndpoint(NKRO_IN_EPNUM); - - /* Check if write ready for a polling interval around 1ms */ - while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(4); - if (!Endpoint_IsReadWriteAllowed()) return; - - /* Write Keyboard Report Data */ - Endpoint_Write_Stream_LE(report, NKRO_EPSIZE, NULL); - } - else -#endif - { - /* Boot protocol */ - Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM); - - /* Check if write ready for a polling interval around 10ms */ - while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); - if (!Endpoint_IsReadWriteAllowed()) return; - - /* Write Keyboard Report Data */ - Endpoint_Write_Stream_LE(report, KEYBOARD_EPSIZE, NULL); - } - - /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearIN(); - - keyboard_report_sent = *report; -} - -static void send_mouse(report_mouse_t *report) -{ -#ifdef MOUSE_ENABLE - uint8_t timeout = 255; - - if (USB_DeviceState != DEVICE_STATE_Configured) - return; - - /* Select the Mouse Report Endpoint */ - Endpoint_SelectEndpoint(MOUSE_IN_EPNUM); - - /* Check if write ready for a polling interval around 10ms */ - while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); - if (!Endpoint_IsReadWriteAllowed()) return; - - /* Write Mouse Report Data */ - Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL); - - /* Finalize the stream transfer to send the last packet */ - Endpoint_ClearIN(); -#endif -} - -static void send_system(uint16_t data) -{ - uint8_t timeout = 255; - - if (USB_DeviceState != DEVICE_STATE_Configured) - return; - - report_extra_t r = { - .report_id = REPORT_ID_SYSTEM, - .usage = data - }; - Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM); - - /* Check if write ready for a polling interval around 10ms */ - while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); - if (!Endpoint_IsReadWriteAllowed()) return; - - Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL); - Endpoint_ClearIN(); -} - -static void send_consumer(uint16_t data) -{ - uint8_t timeout = 255; - - if (USB_DeviceState != DEVICE_STATE_Configured) - return; - - report_extra_t r = { - .report_id = REPORT_ID_CONSUMER, - .usage = data - }; - Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM); - - /* Check if write ready for a polling interval around 10ms */ - while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40); - if (!Endpoint_IsReadWriteAllowed()) return; - - Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL); - Endpoint_ClearIN(); -} - - -/******************************************************************************* - * sendchar - ******************************************************************************/ -#ifdef CONSOLE_ENABLE -#define SEND_TIMEOUT 5 -int8_t sendchar(uint8_t c) -{ - // Not wait once timeouted. - // Because sendchar() is called so many times, waiting each call causes big lag. - static bool timeouted = false; - - if (USB_DeviceState != DEVICE_STATE_Configured) - return -1; - - uint8_t ep = Endpoint_GetCurrentEndpoint(); - Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM); - if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) { - goto ERROR_EXIT; - } - - if (timeouted && !Endpoint_IsReadWriteAllowed()) { - goto ERROR_EXIT; - } - - timeouted = false; - - uint8_t timeout = SEND_TIMEOUT; - while (!Endpoint_IsReadWriteAllowed()) { - if (USB_DeviceState != DEVICE_STATE_Configured) { - goto ERROR_EXIT; - } - if (Endpoint_IsStalled()) { - goto ERROR_EXIT; - } - if (!(timeout--)) { - timeouted = true; - goto ERROR_EXIT; - } - _delay_ms(1); - } - - Endpoint_Write_8(c); - - // send when bank is full - if (!Endpoint_IsReadWriteAllowed()) - Endpoint_ClearIN(); - - Endpoint_SelectEndpoint(ep); - return 0; -ERROR_EXIT: - Endpoint_SelectEndpoint(ep); - return -1; -} -#else -int8_t sendchar(uint8_t c) -{ - return 0; -} -#endif - - -/******************************************************************************* - * main - ******************************************************************************/ -static void SetupHardware(void) -{ - /* Disable watchdog if enabled by bootloader/fuses */ - MCUSR &= ~(1 << WDRF); - wdt_disable(); - - /* Disable clock division */ - clock_prescale_set(clock_div_1); - - // Leonardo needs. Without this USB device is not recognized. - USB_Disable(); - - USB_Init(); - - // for Console_Task - USB_Device_EnableSOFEvents(); - print_set_sendchar(sendchar); -} - -int main(void) __attribute__ ((weak)); -int main(void) -{ - SetupHardware(); - sei(); - - /* wait for USB startup & debug output */ - while (USB_DeviceState != DEVICE_STATE_Configured) { -#if defined(INTERRUPT_CONTROL_ENDPOINT) - ; -#else - USB_USBTask(); -#endif - } - print("USB configured.\n"); - - /* init modules */ - keyboard_init(); - host_set_driver(&lufa_driver); -#ifdef SLEEP_LED_ENABLE - sleep_led_init(); -#endif - - print("Keyboard start.\n"); - while (1) { - while (USB_DeviceState == DEVICE_STATE_Suspended) { - print("[s]"); - suspend_power_down(); - if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) { - USB_Device_SendRemoteWakeup(); - } - } - - keyboard_task(); - -#if !defined(INTERRUPT_CONTROL_ENDPOINT) - USB_USBTask(); -#endif - } -} diff --git a/protocol/lufa/lufa.h b/protocol/lufa/lufa.h deleted file mode 100644 index 195123c0f..000000000 --- a/protocol/lufa/lufa.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright 2012 Jun Wako <wakojun@gmail.com> - * This file is based on: - * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse - * LUFA-120219/Demos/Device/Lowlevel/GenericHID - */ - -/* - LUFA Library - Copyright (C) Dean Camera, 2012. - - dean [at] fourwalledcubicle [dot] com - www.lufa-lib.org -*/ - -/* - Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com) - Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com) - - Permission to use, copy, modify, distribute, and sell this - software and its documentation for any purpose is hereby granted - without fee, provided that the above copyright notice appear in - all copies and that both that the copyright notice and this - permission notice and warranty disclaimer appear in supporting - documentation, and that the name of the author not be used in - advertising or publicity pertaining to distribution of the - software without specific, written prior permission. - - The author disclaim all warranties with regard to this - software, including all implied warranties of merchantability - and fitness. In no event shall the author be liable for any - special, indirect or consequential damages or any damages - whatsoever resulting from loss of use, data or profits, whether - in an action of contract, negligence or other tortious action, - arising out of or in connection with the use or performance of - this software. -*/ - -#ifndef _LUFA_H_ -#define _LUFA_H_ - -#include <avr/io.h> -#include <avr/wdt.h> -#include <avr/power.h> -#include <avr/interrupt.h> -#include <stdbool.h> -#include <string.h> -#include <LUFA/Version.h> -#include <LUFA/Drivers/USB/USB.h> -#include "host.h" - - -#ifdef __cplusplus -extern "C" { -#endif - -extern host_driver_t lufa_driver; - -#ifdef __cplusplus -} -#endif - -/* extra report structure */ -typedef struct { - uint8_t report_id; - uint16_t usage; -} __attribute__ ((packed)) report_extra_t; - - -#if LUFA_VERSION_INTEGER < 0x120730 - /* old API 120219 */ - #define ENDPOINT_CONFIG(epnum, eptype, epdir, epsize, epbank) Endpoint_ConfigureEndpoint(epnum, eptype, epdir, epsize, epbank) -#else - /* new API >= 120730 */ - #define ENDPOINT_BANK_SINGLE 1 - #define ENDPOINT_BANK_DOUBLE 2 - #define ENDPOINT_CONFIG(epnum, eptype, epdir, epsize, epbank) Endpoint_ConfigureEndpoint((epdir) | (epnum) , eptype, epsize, epbank) -#endif - -#endif |
