diff options
Diffstat (limited to 'protocol/usb_hid/arduino-1.0.1/variants/standard/pins_arduino.h')
| -rw-r--r-- | protocol/usb_hid/arduino-1.0.1/variants/standard/pins_arduino.h | 218 |
1 files changed, 0 insertions, 218 deletions
diff --git a/protocol/usb_hid/arduino-1.0.1/variants/standard/pins_arduino.h b/protocol/usb_hid/arduino-1.0.1/variants/standard/pins_arduino.h deleted file mode 100644 index 30b426630..000000000 --- a/protocol/usb_hid/arduino-1.0.1/variants/standard/pins_arduino.h +++ /dev/null @@ -1,218 +0,0 @@ -/* - pins_arduino.h - Pin definition functions for Arduino - Part of Arduino - http://www.arduino.cc/ - - Copyright (c) 2007 David A. Mellis - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General - Public License along with this library; if not, write to the - Free Software Foundation, Inc., 59 Temple Place, Suite 330, - Boston, MA 02111-1307 USA - - $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ -*/ - -#ifndef Pins_Arduino_h -#define Pins_Arduino_h - -#include <avr/pgmspace.h> - -#define NUM_DIGITAL_PINS 20 -#define NUM_ANALOG_INPUTS 6 -#define analogInputToDigitalPin(p) ((p < 6) ? (p) + 14 : -1) - -#if defined(__AVR_ATmega8__) -#define digitalPinHasPWM(p) ((p) == 9 || (p) == 10 || (p) == 11) -#else -#define digitalPinHasPWM(p) ((p) == 3 || (p) == 5 || (p) == 6 || (p) == 9 || (p) == 10 || (p) == 11) -#endif - -static const uint8_t SS = 10; -static const uint8_t MOSI = 11; -static const uint8_t MISO = 12; -static const uint8_t SCK = 13; - -static const uint8_t SDA = 18; -static const uint8_t SCL = 19; -static const uint8_t LED_BUILTIN = 13; - -static const uint8_t A0 = 14; -static const uint8_t A1 = 15; -static const uint8_t A2 = 16; -static const uint8_t A3 = 17; -static const uint8_t A4 = 18; -static const uint8_t A5 = 19; -static const uint8_t A6 = 20; -static const uint8_t A7 = 21; - -#define digitalPinToPCICR(p) (((p) >= 0 && (p) <= 21) ? (&PCICR) : ((uint8_t *)0)) -#define digitalPinToPCICRbit(p) (((p) <= 7) ? 2 : (((p) <= 13) ? 0 : 1)) -#define digitalPinToPCMSK(p) (((p) <= 7) ? (&PCMSK2) : (((p) <= 13) ? (&PCMSK0) : (((p) <= 21) ? (&PCMSK1) : ((uint8_t *)0)))) -#define digitalPinToPCMSKbit(p) (((p) <= 7) ? (p) : (((p) <= 13) ? ((p) - 8) : ((p) - 14))) - -#ifdef ARDUINO_MAIN - -// On the Arduino board, digital pins are also used -// for the analog output (software PWM). Analog input -// pins are a separate set. - -// ATMEL ATMEGA8 & 168 / ARDUINO -// -// +-\/-+ -// PC6 1| |28 PC5 (AI 5) -// (D 0) PD0 2| |27 PC4 (AI 4) -// (D 1) PD1 3| |26 PC3 (AI 3) -// (D 2) PD2 4| |25 PC2 (AI 2) -// PWM+ (D 3) PD3 5| |24 PC1 (AI 1) -// (D 4) PD4 6| |23 PC0 (AI 0) -// VCC 7| |22 GND -// GND 8| |21 AREF -// PB6 9| |20 AVCC -// PB7 10| |19 PB5 (D 13) -// PWM+ (D 5) PD5 11| |18 PB4 (D 12) -// PWM+ (D 6) PD6 12| |17 PB3 (D 11) PWM -// (D 7) PD7 13| |16 PB2 (D 10) PWM -// (D 8) PB0 14| |15 PB1 (D 9) PWM -// +----+ -// -// (PWM+ indicates the additional PWM pins on the ATmega168.) - -// ATMEL ATMEGA1280 / ARDUINO -// -// 0-7 PE0-PE7 works -// 8-13 PB0-PB5 works -// 14-21 PA0-PA7 works -// 22-29 PH0-PH7 works -// 30-35 PG5-PG0 works -// 36-43 PC7-PC0 works -// 44-51 PJ7-PJ0 works -// 52-59 PL7-PL0 works -// 60-67 PD7-PD0 works -// A0-A7 PF0-PF7 -// A8-A15 PK0-PK7 - - -// these arrays map port names (e.g. port B) to the -// appropriate addresses for various functions (e.g. reading -// and writing) -const uint16_t PROGMEM port_to_mode_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &DDRB, - (uint16_t) &DDRC, - (uint16_t) &DDRD, -}; - -const uint16_t PROGMEM port_to_output_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PORTB, - (uint16_t) &PORTC, - (uint16_t) &PORTD, -}; - -const uint16_t PROGMEM port_to_input_PGM[] = { - NOT_A_PORT, - NOT_A_PORT, - (uint16_t) &PINB, - (uint16_t) &PINC, - (uint16_t) &PIND, -}; - -const uint8_t PROGMEM digital_pin_to_port_PGM[] = { - PD, /* 0 */ - PD, - PD, - PD, - PD, - PD, - PD, - PD, - PB, /* 8 */ - PB, - PB, - PB, - PB, - PB, - PC, /* 14 */ - PC, - PC, - PC, - PC, - PC, -}; - -const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { - _BV(0), /* 0, port D */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), - _BV(6), - _BV(7), - _BV(0), /* 8, port B */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), - _BV(0), /* 14, port C */ - _BV(1), - _BV(2), - _BV(3), - _BV(4), - _BV(5), -}; - -const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { - NOT_ON_TIMER, /* 0 - port D */ - NOT_ON_TIMER, - NOT_ON_TIMER, - // on the ATmega168, digital pin 3 has hardware pwm -#if defined(__AVR_ATmega8__) - NOT_ON_TIMER, -#else - TIMER2B, -#endif - NOT_ON_TIMER, - // on the ATmega168, digital pins 5 and 6 have hardware pwm -#if defined(__AVR_ATmega8__) - NOT_ON_TIMER, - NOT_ON_TIMER, -#else - TIMER0B, - TIMER0A, -#endif - NOT_ON_TIMER, - NOT_ON_TIMER, /* 8 - port B */ - TIMER1A, - TIMER1B, -#if defined(__AVR_ATmega8__) - TIMER2, -#else - TIMER2A, -#endif - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, /* 14 - port C */ - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, - NOT_ON_TIMER, -}; - -#endif - -#endif |