diff options
Diffstat (limited to 'protocol/usb_hid/test')
| -rw-r--r-- | protocol/usb_hid/test/Makefile | 126 | ||||
| -rw-r--r-- | protocol/usb_hid/test/config.h | 40 | ||||
| -rw-r--r-- | protocol/usb_hid/test/test.cpp | 92 |
3 files changed, 258 insertions, 0 deletions
diff --git a/protocol/usb_hid/test/Makefile b/protocol/usb_hid/test/Makefile new file mode 100644 index 000000000..39f5de455 --- /dev/null +++ b/protocol/usb_hid/test/Makefile @@ -0,0 +1,126 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device. +# Please customize your programmer settings(PROGRAM_CMD) +# +# make teensy = Download the hex file to the device, using teensy_loader_cli. +# (must have teensy_loader_cli installed). +# +# make dfu = Download the hex file to the device, using dfu-programmer (must +# have dfu-programmer installed). +# +# make flip = Download the hex file to the device, using Atmel FLIP (must +# have Atmel FLIP installed). +# +# make dfu-ee = Download the eeprom file to the device, using dfu-programmer +# (must have dfu-programmer installed). +# +# make flip-ee = Download the eeprom file to the device, using Atmel FLIP +# (must have Atmel FLIP installed). +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Target file name (without extension). +TARGET = usb_hid_test + +TOP_DIR = ../../.. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# MCU name +MCU = atmega32u4 + + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + + +# Build Options +# comment out to disable the options. +# +# Console for debug +OPT_DEFS += -DCONSOLE_ENABLE + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +#OPT_DEFS += -DBOOT_SIZE=4096 + + + +SRC = test.cpp +SRC += common/debug.c +SRC += common/print.c + +CONFIG_H = config.h + + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TOP_DIR) +VPATH += $(TOP_DIR)/common + + + +# program Leonardo +PROGRAM_CMD = avrdude -p$(MCU) -cavr109 -P$(DEV) -b57600 -Uflash:w:$(TARGET).hex + + + +include $(TOP_DIR)/protocol/usb_hid.mk +include $(TOP_DIR)/protocol/lufa.mk +include $(TOP_DIR)/rules.mk diff --git a/protocol/usb_hid/test/config.h b/protocol/usb_hid/test/config.h new file mode 100644 index 000000000..c2230fb57 --- /dev/null +++ b/protocol/usb_hid/test/config.h @@ -0,0 +1,40 @@ +/* +Copyright 2012 Jun Wako <wakojun@gmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xCAFE +#define DEVICE_VER 0x0814 +#define MANUFACTURER t.m.k. +#define PRODUCT USB to USB keyboard converter + + +#define DESCRIPTION Product from t.m.k. keyboard firmware project + + +/* matrix size */ +#define MATRIX_ROWS 32 +#define MATRIX_COLS 8 + + +/* key combination for command */ +#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT))) + +#endif diff --git a/protocol/usb_hid/test/test.cpp b/protocol/usb_hid/test/test.cpp new file mode 100644 index 000000000..4958f0c61 --- /dev/null +++ b/protocol/usb_hid/test/test.cpp @@ -0,0 +1,92 @@ +#include <avr/io.h> +#include <avr/wdt.h> +#include <avr/power.h> +#include <util/delay.h> +#include <Arduino.h> + +// USB HID host +#include "Usb.h" +#include "hid.h" +#include "hidboot.h" +#include "parser.h" + +// LUFA +#include "lufa.h" + +#include "debug.h" + +#include "leonardo_led.h" + + +static USB usb_host; +static HIDBoot<HID_PROTOCOL_KEYBOARD> kbd(&usb_host); +static KBDReportParser kbd_parser; + +static void LUFA_setup(void) +{ + /* Disable watchdog if enabled by bootloader/fuses */ + MCUSR &= ~(1 << WDRF); + wdt_disable(); + + /* Disable clock division */ + clock_prescale_set(clock_div_1); + + // Leonardo needs. Without this USB device is not recognized. + USB_Disable(); + + USB_Init(); + + // for Console_Task + USB_Device_EnableSOFEvents(); +} + +static void HID_setup() +{ + // Arduino Timer startup: wiring.c + init(); + + if (usb_host.Init() == -1) { + debug("HID init: failed\n"); + LED_TX_OFF; + } + + _delay_ms(200); + + kbd.SetReportParser(0, (HIDReportParser*)&kbd_parser); +} + +int main(void) +{ + // LED for debug + LED_TX_INIT; + LED_TX_ON; + + print_enable = true; + debug_enable = true; + debug_matrix = true; + debug_keyboard = true; + debug_mouse = true; + + LUFA_setup(); + sei(); + + // wait for startup of sendchar routine + while (USB_DeviceState != DEVICE_STATE_Configured) ; + if (debug_enable) { + _delay_ms(1000); + } + + HID_setup(); + + debug("init: done\n"); + for (;;) { + usb_host.Task(); + +#if !defined(INTERRUPT_CONTROL_ENDPOINT) + // LUFA Task for control request + USB_USBTask(); +#endif + } + + return 0; +} |