diff options
Diffstat (limited to 'ps2_usb/config_vusb.h')
| -rw-r--r-- | ps2_usb/config_vusb.h | 116 |
1 files changed, 116 insertions, 0 deletions
diff --git a/ps2_usb/config_vusb.h b/ps2_usb/config_vusb.h new file mode 100644 index 000000000..0463f68ba --- /dev/null +++ b/ps2_usb/config_vusb.h @@ -0,0 +1,116 @@ +#ifndef CONFIG_H +#define CONFIG_H + + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x2233 +// TODO: share these strings with usbconfig.h +// Edit usbconfig.h to change these. +#define MANUFACTURER t.m.k. +#define PRODUCT PS/2 keyboard converter +#define DESCRIPTION convert PS/2 keyboard to USB + + +/* matrix size */ +#define MATRIX_ROWS 32 // keycode bit: 3-0 +#define MATRIX_COLS 8 // keycode bit: 6-4 + + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \ + keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \ +) + + +/* mouse keys */ +#ifdef MOUSEKEY_ENABLE +# define MOUSEKEY_DELAY_TIME 255 +#endif + + +/* PS/2 lines */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 4 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 0 + + +// Synchronous USART is used to receive data from keyboard. +// Use RXD pin for PS/2 DATA line and XCK for PS/2 CLOCK. +// NOTE: This is recomended strongly if you use V-USB library. +#define PS2_USE_USART + +// External or Pin Change Interrupt is used to receive data from keyboard. +// Use INT1 or PCINTxx for PS/2 CLOCK line. see below. +//#define PS2_USE_INT + + +#ifdef PS2_USE_USART +// synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge +// set DDR of CLOCK as input to be slave +#define PS2_USART_INIT() do { \ + PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ + PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ + UCSR0C = ((1 << UMSEL00) | \ + (3 << UPM00) | \ + (0 << USBS0) | \ + (3 << UCSZ00) | \ + (0 << UCPOL0)); \ + UCSR0A = 0; \ + UBRR0H = 0; \ + UBRR0L = 0; \ +} while (0) +#define PS2_USART_RX_INT_ON() do { \ + UCSR0B = ((1 << RXCIE0) | \ + (1 << RXEN0)); \ +} while (0) +#define PS2_USART_RX_POLL_ON() do { \ + UCSR0B = (1 << RXEN0); \ +} while (0) +#define PS2_USART_OFF() do { \ + UCSR0C = 0; \ + UCSR0B &= ~((1 << RXEN0) | \ + (1 << TXEN0)); \ +} while (0) +#define PS2_USART_RX_READY (UCSR0A & (1<<RXC0)) +#define PS2_USART_RX_DATA UDR0 +#define PS2_USART_ERROR (UCSR0A & ((1<<FE0) | (1<<DOR0) | (1<<UPE0))) +#define PS2_USART_RX_VECT USART_RX_vect +#endif + + +#ifdef PS2_USE_INT +/* INT1 +#define PS2_INT_INIT() do { \ + EICRA |= ((1<<ISC11) | \ + (0<<ISC10)); \ +} while (0) +#define PS2_INT_ON() do { \ + EIMSK |= (1<<INT1); \ +} while (0) +#define PS2_INT_OFF() do { \ + EIMSK &= ~(1<<INT1); \ +} while (0) +#define PS2_INT_VECT INT1_vect +*/ + +/* PCINT20 */ +#define PS2_INT_INIT() do { \ + PCICR |= (1<<PCIE2); \ +} while (0) +#define PS2_INT_ON() do { \ + PCMSK2 |= (1<<PCINT20); \ +} while (0) +#define PS2_INT_OFF() do { \ + PCMSK2 &= ~(1<<PCINT20); \ + PCICR &= ~(1<<PCIE2); \ +} while (0) +#define PS2_INT_VECT PCINT2_vect +#endif + +#endif |