blob: cbf72914e9288626b0ba1a53ae4ed2733805013f (
plain) (
blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
|
# Encoders
Basic encoders are supported by adding this to your `rules.mk`:
ENCODER_ENABLE = yes
and this to your `config.h`:
#define ENCODERS_PAD_A { B12 }
#define ENCODERS_PAD_B { B13 }
Each PAD_A/B variable defines an array so multiple encoders can be defined, e.g.:
#define ENCODERS_PAD_A { encoder1a, encoder2a }
#define ENCODERS_PAD_B { encoder1b, encoder2b }
If your encoder's clockwise directions are incorrect, you can swap the A & B pad definitions.
Additionally, the resolution can be specified in the same file (the default & suggested is 4):
#define ENCODER_RESOLUTION 4
## Split Keyboards
If you are using different pinouts for the encoders on each half of a split keyboard, you can define the pinout for the right half like this:
```c
#define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a }
#define ENCODERS_PAD_B_RIGHT { encoder1b, encoder2b }
```
## Callbacks
The callback functions can be inserted into your `<keyboard>.c`:
void encoder_update_kb(uint8_t index, bool clockwise) {
encoder_update_user(index, clockwise);
}
or `keymap.c`:
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_PGDN);
} else {
tap_code(KC_PGUP);
}
} else if (index == 1) { /* Second encoder */
if (clockwise) {
tap_code(KC_UP);
} else {
tap_code(KC_DOWN);
}
}
}
## Hardware
The A an B lines of the encoders should be wired directly to the MCU, and the C/common lines should be wired to ground.
|
