Pull latest translations

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>

1 files changed, 351 insertions, 335 deletions

diff --git a/translations/subsurface_pl_PL.ts b/translations/subsurface_pl_PL.ts
index 251bc5524..27045a0c4 100644
--- a/translations/subsurface_pl_PL.ts
+++ b/translations/subsurface_pl_PL.ts
@@ -258,12 +258,12 @@
 <context>
     <name>BuddyFilter</name>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="613"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="612"/>
         <source>Person: </source>
         <translation>Osoba:</translation>
     </message>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="614"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="613"/>
         <source>Searches for buddies and divemasters</source>
         <translation>Wyszukiwanie partnerów i divemasterów</translation>
     </message>
@@ -1716,17 +1716,17 @@
         <translation>Użycie</translation>
     </message>
     <message>
-        <location filename="../qt-models/cylindermodel.cpp" line="124"/>
+        <location filename="../qt-models/cylindermodel.cpp" line="132"/>
         <source>Clicking here will remove this cylinder.</source>
         <translation>Kliknięcie tu usunie butlę z listy.</translation>
     </message>
     <message>
-        <location filename="../qt-models/cylindermodel.cpp" line="342"/>
+        <location filename="../qt-models/cylindermodel.cpp" line="350"/>
         <source>Cylinder cannot be removed</source>
         <translation>Butla nie może być usunięta.</translation>
     </message>
     <message>
-        <location filename="../qt-models/cylindermodel.cpp" line="343"/>
+        <location filename="../qt-models/cylindermodel.cpp" line="351"/>
         <source>This gas is in use. Only cylinders that are not used in the dive can be removed.</source>
         <translation>Ten gaz jest używany. Można usuwać tylko gazy, których nie używasz.</translation>
     </message>
@@ -1899,104 +1899,6 @@ wybrany komputer nurkowy?</translation>
     </message>
 </context>
 <context>
-    <name>DiveItem</name>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="192"/>
-        <source>#</source>
-        <translation>Nr</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="195"/>
-        <source>Date</source>
-        <translation>Data</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="198"/>
-        <source>Rating</source>
-        <translation>Ocena</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="201"/>
-        <source>Depth(%1)</source>
-        <translation>Głębokość(%1)</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="201"/>
-        <source>m</source>
-        <translation>m</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="201"/>
-        <source>ft</source>
-        <translation>ft</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="204"/>
-        <source>Duration</source>
-        <translation>Czas trwania</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="207"/>
-        <source>Temp(%1%2)</source>
-        <translation>Temperatura(%1%2)</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="210"/>
-        <source>Weight(%1)</source>
-        <translation>Balast(%1)</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="210"/>
-        <source>kg</source>
-        <translation>kg</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="210"/>
-        <source>lbs</source>
-        <translation>lbs</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="213"/>
-        <source>Suit</source>
-        <translation>Skafander</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="216"/>
-        <source>Cyl</source>
-        <translation>Butle</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="219"/>
-        <source>Gas</source>
-        <translation>Gaz</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="224"/>
-        <source>SAC(%1)</source>
-        <translation>SAC(%1)</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="224"/>
-        <source>/min</source>
-        <translation>/min</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="227"/>
-        <source>OTU</source>
-        <translation>OTU</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="230"/>
-        <source>Max CNS</source>
-        <translation>Max CNS</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="233"/>
-        <source>Location</source>
-        <translation>Miejsce</translation>
-    </message>
-</context>
-<context>
     <name>DiveListView</name>
     <message>
         <location filename="../qt-ui/divelistview.cpp" line="845"/>
@@ -2097,12 +1999,12 @@ wybrany komputer nurkowy?</translation>
 <context>
     <name>DiveLocationModel</name>
     <message>
-        <location filename="../qt-ui/locationinformation.cpp" line="323"/>
+        <location filename="../qt-ui/locationinformation.cpp" line="327"/>
         <source>Create a new dive site, copying relevant information from the current dive.</source>
         <translation>Utwórz nowe miejsce nurkowe, skopiuj istotne informacje z bieżącego nurkowania.</translation>
     </message>
     <message>
-        <location filename="../qt-ui/locationinformation.cpp" line="324"/>
+        <location filename="../qt-ui/locationinformation.cpp" line="328"/>
         <source>Create a new dive site with this name</source>
         <translation>Utwórz nowe miejsce nurkowe z tą nazwą</translation>
     </message>
@@ -2788,32 +2690,32 @@ wybrany komputer nurkowy?</translation>
 <context>
     <name>DivePlannerPointsModel</name>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="129"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="134"/>
         <source>unknown</source>
         <translation>nieznana</translation>
     </message>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="306"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="311"/>
         <source>Final depth</source>
         <translation>Głębokość końcowa</translation>
     </message>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="308"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="313"/>
         <source>Run time</source>
         <translation>Czas</translation>
     </message>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="310"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="315"/>
         <source>Duration</source>
         <translation>Czas trwania</translation>
     </message>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="312"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="317"/>
         <source>Used gas</source>
         <translation>Używany gaz</translation>
     </message>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="314"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="319"/>
         <source>CC setpoint</source>
         <translation>CC setpoint</translation>
     </message>
@@ -3022,127 +2924,127 @@ p, li { white-space: pre-wrap; }
 <context>
     <name>DiveTripModel</name>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="393"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="439"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="395"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="441"/>
         <source>#</source>
         <translation>Nr</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="396"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="442"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="398"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="444"/>
         <source>Date</source>
         <translation>Data</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="399"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="445"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="401"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="447"/>
         <source>Rating</source>
         <translation>Ocena</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="402"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="404"/>
         <source>Depth</source>
         <translation>Głębokość</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="408"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="410"/>
         <source>Temp</source>
         <translation>Temperatura</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="411"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="413"/>
         <source>Weight</source>
         <translation>Balast</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="423"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="425"/>
         <source>SAC</source>
         <translation>SAC</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="448"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="450"/>
         <source>m</source>
         <translation>m</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="448"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="450"/>
         <source>ft</source>
         <translation>ft</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="457"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="459"/>
         <source>Weight(%1)</source>
         <translation>Balast(%1)</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="414"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="460"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="416"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="462"/>
         <source>Suit</source>
         <translation>Skafander</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="417"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="463"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="419"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="465"/>
         <source>Cyl</source>
         <translation>Butle</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="420"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="466"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="422"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="468"/>
         <source>Gas</source>
         <translation>Gaz</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="471"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="473"/>
         <source>SAC(%1)</source>
         <translation>SAC(%1)</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="471"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="473"/>
         <source>/min</source>
         <translation>/min</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="429"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="477"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="431"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="479"/>
         <source>Max CNS</source>
         <translation>Max CNS</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="432"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="480"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="434"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="482"/>
         <source>Location</source>
         <translation>Miejsce</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="457"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="459"/>
         <source>kg</source>
         <translation>kg</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="448"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="450"/>
         <source>Depth(%1)</source>
         <translation>Głębokość(%1)</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="405"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="451"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="407"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="453"/>
         <source>Duration</source>
         <translation>Czas trwania</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="454"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="456"/>
         <source>Temp(%1%2)</source>
         <translation>Temperatura(%1%2)</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="457"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="459"/>
         <source>lbs</source>
         <translation>lbs</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="426"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="474"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="428"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="476"/>
         <source>OTU</source>
         <translation>OTU</translation>
     </message>
@@ -3535,7 +3437,7 @@ Prześlij proszę poniższą informację programistom Subsurface.</translation>
 <context>
     <name>LocationFilter</name>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="640"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="639"/>
         <source>Location: </source>
         <translation>Miejsce:</translation>
     </message>
@@ -3661,7 +3563,7 @@ Prześlij proszę poniższą informację programistom Subsurface.</translation>
     </message>
     <message>
         <location filename="../qt-ui/locationinformation.cpp" line="31"/>
-        <location filename="../qt-ui/locationinformation.cpp" line="216"/>
+        <location filename="../qt-ui/locationinformation.cpp" line="217"/>
         <source>Dive site management</source>
         <translation>Zarządzanie miejscami nurkowymi</translation>
     </message>
@@ -3683,7 +3585,7 @@ Prześlij proszę poniższą informację programistom Subsurface.</translation>
 Czy na pewno kontynuować?</translation>
     </message>
     <message>
-        <location filename="../qt-ui/locationinformation.cpp" line="223"/>
+        <location filename="../qt-ui/locationinformation.cpp" line="224"/>
         <source>You are editing a dive site</source>
         <translation>Edytujesz miejsce nurkowania</translation>
     </message>
@@ -3994,6 +3896,26 @@ Czy na pewno kontynuować?</translation>
         <translation>Dodaj balast</translation>
     </message>
     <message>
+        <location filename="../qt-ui/maintab.cpp" line="98"/>
+        <source>OC</source>
+        <translation>OC</translation>
+    </message>
+    <message>
+        <location filename="../qt-ui/maintab.cpp" line="98"/>
+        <source>CCR</source>
+        <translation>CCR</translation>
+    </message>
+    <message>
+        <location filename="../qt-ui/maintab.cpp" line="98"/>
+        <source>pSCR</source>
+        <translation>pSCR</translation>
+    </message>
+    <message>
+        <location filename="../qt-ui/maintab.cpp" line="98"/>
+        <source>Freedive</source>
+        <translation type="unfinished"/>
+    </message>
+    <message>
         <location filename="../qt-ui/maintab.cpp" line="307"/>
         <source>Air temp. [%1]</source>
         <translation>Temp. powietrza [%1]</translation>
@@ -4031,69 +3953,69 @@ Czy na pewno kontynuować?</translation>
     </message>
     <message>
         <location filename="../qt-ui/maintab.cpp" line="606"/>
-        <location filename="../qt-ui/maintab.cpp" line="638"/>
         <location filename="../qt-ui/maintab.cpp" line="642"/>
         <location filename="../qt-ui/maintab.cpp" line="646"/>
+        <location filename="../qt-ui/maintab.cpp" line="650"/>
         <source>/min</source>
         <translation>/min</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="635"/>
+        <location filename="../qt-ui/maintab.cpp" line="639"/>
         <source>Deepest dive</source>
         <translation>Najgłębsze nurkowanie</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="636"/>
+        <location filename="../qt-ui/maintab.cpp" line="640"/>
         <source>Shallowest dive</source>
         <translation>Najpłytsze nurkowanie</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="649"/>
+        <location filename="../qt-ui/maintab.cpp" line="653"/>
         <source>Highest total SAC of a dive</source>
         <translation>Najwyższy SAC</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="650"/>
+        <location filename="../qt-ui/maintab.cpp" line="654"/>
         <source>Lowest total SAC of a dive</source>
         <translation>Najniższy SAC</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="651"/>
+        <location filename="../qt-ui/maintab.cpp" line="655"/>
         <source>Average total SAC of all selected dives</source>
         <translation>Średni SAC z wybranych nurkowań</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="662"/>
+        <location filename="../qt-ui/maintab.cpp" line="666"/>
         <source>Highest temperature</source>
         <translation>Najwyższa temperatura</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="663"/>
+        <location filename="../qt-ui/maintab.cpp" line="667"/>
         <source>Lowest temperature</source>
         <translation>Najniższa temperatura</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="664"/>
+        <location filename="../qt-ui/maintab.cpp" line="668"/>
         <source>Average temperature of all selected dives</source>
         <translation>Średnia temperatura z wybranych nurkowań</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="674"/>
+        <location filename="../qt-ui/maintab.cpp" line="678"/>
         <source>Longest dive</source>
         <translation>Najdłuższe nurkowanie</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="675"/>
+        <location filename="../qt-ui/maintab.cpp" line="679"/>
         <source>Shortest dive</source>
         <translation>Najkrótsze nurkowanie</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="676"/>
+        <location filename="../qt-ui/maintab.cpp" line="680"/>
         <source>Average length of all selected dives</source>
         <translation>Średnia długość wybranych nurkowań</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="700"/>
+        <location filename="../qt-ui/maintab.cpp" line="704"/>
         <source>These gases could be
 mixed from Air and using:
 </source>
@@ -4102,22 +4024,22 @@ z powietrza przy użyciu:
 </translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="704"/>
+        <location filename="../qt-ui/maintab.cpp" line="708"/>
         <source> and </source>
         <translation>oraz </translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="834"/>
+        <location filename="../qt-ui/maintab.cpp" line="838"/>
         <source>New dive site</source>
         <translation>Nowe miejsce nurkowe</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="1128"/>
+        <location filename="../qt-ui/maintab.cpp" line="1132"/>
         <source>Discard the changes?</source>
         <translation>Porzucić zmiany?</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="1129"/>
+        <location filename="../qt-ui/maintab.cpp" line="1133"/>
         <source>You are about to discard your changes.</source>
         <translation>Masz zamiar porzucić zmiany.</translation>
     </message>
@@ -4270,7 +4192,7 @@ z powietrza przy użyciu:
     <message>
         <location filename="../qt-ui/mainwindow.ui" line="171"/>
         <location filename="../build/ui_mainwindow.h" line="460"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="362"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="407"/>
         <source>Open</source>
         <translation>Otwórz</translation>
     </message>
@@ -4523,7 +4445,7 @@ z powietrza przy użyciu:
     <message>
         <location filename="../qt-ui/mainwindow.ui" line="698"/>
         <location filename="../build/ui_mainwindow.h" line="560"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="226"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="225"/>
         <source>&amp;Undo</source>
         <translation>Cofnij</translation>
     </message>
@@ -4536,7 +4458,7 @@ z powietrza przy użyciu:
     <message>
         <location filename="../qt-ui/mainwindow.ui" line="706"/>
         <location filename="../build/ui_mainwindow.h" line="562"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="227"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="226"/>
         <source>&amp;Redo</source>
         <translation>Ponów</translation>
     </message>
@@ -4771,144 +4693,144 @@ z powietrza przy użyciu:
         <translation>F11</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="359"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="404"/>
         <source>Open file</source>
         <translation>Otwórz plik</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="363"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="468"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="1853"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="408"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="513"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1903"/>
         <source>Cancel</source>
         <translation>Anuluj</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="464"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="509"/>
         <source>Traverse image directories</source>
         <translation>Katalogi zdjęć do przejrzenia</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="467"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="512"/>
         <source>Scan</source>
         <translation>Skanuj</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="475"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="520"/>
         <source>Scanning images...(this can take a while)</source>
         <translation>Skanowanie zdjeć... (to chwilę potrwa)</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="528"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="573"/>
         <source>Please save or cancel the current dive edit before closing the file.</source>
         <translation>Zapisz zmiany lub anuluj edycję tego nurkowania przed zamknięciem pliku.</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="646"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="691"/>
         <source>Please save or cancel the current dive edit before trying to add a dive.</source>
         <translation>Zapisz zmiany lub anuluj edycję tego nurkowania przed dodaniem nowego.</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="697"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="743"/>
         <source>Print runtime table</source>
         <translation>Drukowanie planu nurkowego</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="802"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="849"/>
         <source>Trying to edit a dive that&apos;s not a manually added dive.</source>
         <translation>Próba edycji nurkowania, które nie zostało dodane ręcznie.</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1060"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1110"/>
         <source>Do you want to save the changes that you made in the file %1?</source>
         <translation>Czy chcesz zapisać zmiany dokonane w pliku %1?</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1063"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1113"/>
         <source>Do you want to save the changes that you made in the data file?</source>
         <translation>Czy chcesz zapisać wprowadzone zmiany?</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1068"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1118"/>
         <source>Save changes?</source>
         <translation>Zapisać zmiany?</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1435"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1485"/>
         <source>Save file as</source>
         <translation>Zapisz plik jako</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1530"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1580"/>
         <source>[cloud storage for] %1</source>
         <translation>[zapis w chmurze dla] %1</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1630"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1680"/>
         <source>Opening datafile from older version</source>
         <translation>Otwarto plik ze starszej wersji</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1631"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1681"/>
         <source>You opened a data file from an older version of Subsurface. We recommend you read the manual to learn about the changes in the new version, especially about dive site management which has changed significantly.
 Subsurface has already tried to pre-populate the data but it might be worth while taking a look at the new dive site management system and to make sure that everything looks correct.</source>
         <translation>Otworzony plik pochodzi ze starszej wersji Subsurface. Zalecamy zapoznać się z instrukcją i opisanymi tam zmianami w najnowszej wersji programu, szczególnie z nowym sposobem zarządzania miejscami nurkowymi.
 Subsurface zaimportował informacje o miejscach nurkowych, ale może warto poświęcić chwilę na przejrzenia tych danych i upewnienie się, że wszytko wygląda poprawnie.</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1642"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1692"/>
         <source>Open dive log file</source>
         <translation>Otwórz plik z logiem</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1643"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1693"/>
         <source>Dive log files (*.ssrf *.can *.csv *.db *.sql *.dld *.jlb *.lvd *.sde *.udcf *.uddf *.xml *.txt *.dlf *.apd*.SSRF *.CAN *.CSV *.DB *.SQL *.DLD *.JLB *.LVD *.SDE *.UDCF *.UDDF *.xml *.TXT *.DLF *.APD);;Cochran files (*.can *.CAN);;CSV files (*.csv *.CSV);;DiveLog.de files (*.dld *.DLD);;JDiveLog files (*.jlb *.JLB);;Liquivision files (*.lvd *.LVD);;MkVI files (*.txt *.TXT);;Suunto files (*.sde *.db *.SDE *.DB);;Divesoft files (*.dlf *.DLF);;UDDF/UDCF files (*.uddf *.udcf *.UDDF *.UDCF);;XML files (*.xml *.XML);;APD log viewer (*.apd *.APD);;Datatrak/WLog Files (*.log *.LOG);;OSTCtools Files (*.dive *.DIVE);;All files (*)</source>
         <translation>Logi nurkowe (*.ssrf *.can *.csv *.db *.sql *.dld *.jlb *.lvd *.sde *.udcf *.uddf *.xml *.txt *.dlf *.apd*.SSRF *.CAN *.CSV *.DB *.SQL *.DLD *.JLB *.LVD *.SDE *.UDCF *.UDDF *.xml *.TXT *.DLF *.APD);;Pliki Cochran (*.can *.CAN);;Pliki CSV (*.csv *.CSV);;Pliki DiveLog.de (*.dld *.DLD);;Pliki JDiveLog (*.jlb *.JLB);;Pliki Liquivision (*.lvd *.LVD);;Pliki MkVI (*.txt *.TXT);;Pliki Suunto (*.sde *.db *.SDE *.DB);;Pliki Divesoft (*.dlf *.DLF);;Pliki UDDF/UDCF (*.uddf *.udcf *.UDDF *.UDCF);;Pliki XML (*.xml *.XML);;Pliki APD (*.apd *.APD);;Pliki Datatrak/WLog (*.log *.LOG);;Pliki OSTCtools (*.dive *.DIVE);;Wszystkie pliki(*)</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1853"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1903"/>
         <source>Contacting cloud service...</source>
         <translation>Łączenie się z chmurą...</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1069"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1119"/>
         <source>Changes will be lost if you don&apos;t save them.</source>
         <translation>Zmiany zostaną utracone jeśli ich nie za zapiszesz.</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="503"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="646"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="725"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="796"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="802"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="1688"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="548"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="691"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="771"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="843"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="849"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1738"/>
         <source>Warning</source>
         <translation>Ostrzeżenie</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="353"/>
         <location filename="../qt-ui/mainwindow.cpp" line="398"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="1408"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="443"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1458"/>
         <source>Please save or cancel the current dive edit before opening a new file.</source>
         <translation>Zapisz zmiany lub anuluj to nurkowanie przez otwarciem nowego pliku.</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="725"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="771"/>
         <source>Trying to replan a dive that&apos;s not a planned dive.</source>
         <translation>Próba zmiany planu nurkowania, które nie zostało utworzone przez planer.</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="849"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="896"/>
         <source>Yearly statistics</source>
         <translation>Statystyka roczna</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1436"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1486"/>
         <source>Subsurface XML files (*.ssrf *.xml *.XML)</source>
         <translation>Pliki Subsurface XML  (*.ssrf *.xml *.XML)</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="796"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="1688"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="843"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1738"/>
         <source>Please, first finish the current edition before trying to do another.</source>
         <translation>Proszę dokończyć edycję tego nurkowania przed rozpoczęciem kolejnej. </translation>
     </message>
@@ -4926,7 +4848,7 @@ Subsurface zaimportował informacje o miejscach nurkowych, ale może warto pośw
 <context>
     <name>MultiFilter</name>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="725"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="724"/>
         <source>Filter shows %1 (of %2) dives</source>
         <translation>Filtr pokazuje %1 (z %2) nurkowań</translation>
     </message>
@@ -6044,12 +5966,12 @@ Uaktywnij bluetooth na swoim OSTC Sport i przed kontynuowaniem aktualizacji wyko
 <context>
     <name>QObject</name>
     <message>
-        <location filename="../qthelper.cpp" line="1255"/>
+        <location filename="../qthelper.cpp" line="1310"/>
         <source>AIR</source>
         <translation>POWIETRZE</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1255"/>
+        <location filename="../qthelper.cpp" line="1310"/>
         <source>OXYGEN</source>
         <translation>TLEN</translation>
     </message>
@@ -6089,42 +6011,53 @@ Uaktywnij bluetooth na swoim OSTC Sport i przed kontynuowaniem aktualizacji wyko
         <translation>min</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1269"/>
+        <location filename="../qthelper.cpp" line="1072"/>
+        <location filename="../qthelper.cpp" line="1074"/>
+        <source>(%1 dives)</source>
+        <translation type="unfinished"/>
+    </message>
+    <message>
+        <location filename="../qthelper.cpp" line="1077"/>
+        <source>(1 dive)</source>
+        <translation type="unfinished"/>
+    </message>
+    <message>
+        <location filename="../qthelper.cpp" line="1324"/>
         <source>kg</source>
         <translation>kg</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1270"/>
+        <location filename="../qthelper.cpp" line="1325"/>
         <source>lbs</source>
         <translation>lbs</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1293"/>
+        <location filename="../qthelper.cpp" line="1348"/>
         <source>ft</source>
         <translation>ft</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1294"/>
+        <location filename="../qthelper.cpp" line="1349"/>
         <source>m</source>
         <translation>m</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1316"/>
+        <location filename="../qthelper.cpp" line="1371"/>
         <source>psi</source>
         <translation>psi</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1317"/>
+        <location filename="../qthelper.cpp" line="1372"/>
         <source>bar</source>
         <translation>bar</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1339"/>
+        <location filename="../qthelper.cpp" line="1394"/>
         <source>l</source>
         <translation>l</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1340"/>
+        <location filename="../qthelper.cpp" line="1395"/>
         <source>cuft</source>
         <translation>cuft</translation>
     </message>
@@ -6600,7 +6533,7 @@ Nie wszystkie zdjęcia mają czas w zakresie pomiędzy
 <context>
     <name>SuitFilter</name>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="666"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="665"/>
         <source>Suits: </source>
         <translation>Skafandry:</translation>
     </message>
@@ -6627,7 +6560,7 @@ Nie wszystkie zdjęcia mają czas w zakresie pomiędzy
 <context>
     <name>TagFilter</name>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="587"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="586"/>
         <source>Tags: </source>
         <translation>Tagi:</translation>
     </message>
@@ -6821,17 +6754,10 @@ Nie wszystkie zdjęcia mają czas w zakresie pomiędzy
         <translation>kolor6</translation>
     </message>
     <message>
-        <location filename="../qt-ui/templateedit.cpp" line="135"/>
+        <location filename="../qt-ui/templateedit.cpp" line="133"/>
         <source>Do you want to save your changes?</source>
         <translation>Czy zapisać zmiany?</translation>
     </message>
-    <message>
-        <location filename="../qt-ui/templateedit.cpp" line="140"/>
-        <source>You are about to modify a template bundled with Subsurface.
-</source>
-        <translation>Masz zamiar zmodyfikować szablon dostarczony przez Subsurface.
-</translation>
-    </message>
 </context>
 <context>
     <name>TestParse</name>
@@ -6915,10 +6841,105 @@ Nie wszystkie zdjęcia mają czas w zakresie pomiędzy
 <context>
     <name>TripItem</name>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="65"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="67"/>
         <source>(%1 shown)</source>
         <translation> (%1 pokazane)</translation>
     </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="194"/>
+        <source>#</source>
+        <translation>Nr</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="197"/>
+        <source>Date</source>
+        <translation>Data</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="200"/>
+        <source>Rating</source>
+        <translation>Ocena</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="203"/>
+        <source>Depth(%1)</source>
+        <translation>Głębokość(%1)</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="203"/>
+        <source>m</source>
+        <translation>m</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="203"/>
+        <source>ft</source>
+        <translation>ft</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="206"/>
+        <source>Duration</source>
+        <translation>Czas trwania</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="209"/>
+        <source>Temp(%1%2)</source>
+        <translation>Temperatura(%1%2)</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="212"/>
+        <source>Weight(%1)</source>
+        <translation>Balast(%1)</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="212"/>
+        <source>kg</source>
+        <translation>kg</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="212"/>
+        <source>lbs</source>
+        <translation>lbs</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="215"/>
+        <source>Suit</source>
+        <translation>Skafander</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="218"/>
+        <source>Cyl</source>
+        <translation>Butle</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="221"/>
+        <source>Gas</source>
+        <translation>Gaz</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="226"/>
+        <source>SAC(%1)</source>
+        <translation>SAC(%1)</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="226"/>
+        <source>/min</source>
+        <translation>/min</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="229"/>
+        <source>OTU</source>
+        <translation>OTU</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="232"/>
+        <source>Max CNS</source>
+        <translation>Max CNS</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="235"/>
+        <source>Location</source>
+        <translation>Miejsce</translation>
+    </message>
 </context>
 <context>
     <name>URLDialog</name>
@@ -7016,8 +7037,8 @@ Nie wszystkie zdjęcia mają czas w zakresie pomiędzy
         <translation>Instrukcja obsługi</translation>
     </message>
     <message>
-        <location filename="../qt-ui/usermanual.cpp" line="71"/>
-        <location filename="../qt-ui/usermanual.cpp" line="77"/>
+        <location filename="../qt-ui/usermanual.cpp" line="74"/>
+        <location filename="../qt-ui/usermanual.cpp" line="80"/>
         <source>Cannot find the Subsurface manual</source>
         <translation>Nie można znaleźć dokumentacji Subsurface</translation>
     </message>
@@ -7427,7 +7448,7 @@ Maximum</source>
 <context>
     <name>getextFromC</name>
     <message>
-        <location filename="../libdivecomputer.c" line="641"/>
+        <location filename="../libdivecomputer.c" line="674"/>
         <source>Error parsing the header</source>
         <translation>Błąd podczas przetwarzania nagłówka</translation>
     </message>
@@ -7506,7 +7527,7 @@ Maximum</source>
         <translation>kg</translation>
     </message>
     <message>
-        <location filename="../dive.c" line="1579"/>
+        <location filename="../dive.c" line="1580"/>
         <source>(%s) or (%s)</source>
         <translation>(%s) lub (%s)</translation>
     </message>
@@ -7610,7 +7631,7 @@ Maximum</source>
         <translation>Nie znaleziono komputera nurkowego pasującego do pliku &apos;%s&apos;</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>none</source>
         <translation>brak</translation>
     </message>
@@ -7618,7 +7639,7 @@ Maximum</source>
         <location filename="../cochran.c" line="306"/>
         <location filename="../cochran.c" line="312"/>
         <location filename="../cochran.c" line="382"/>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>deco stop</source>
         <translation>przystanek deco</translation>
     </message>
@@ -7631,7 +7652,7 @@ Maximum</source>
     <message>
         <location filename="../cochran.c" line="367"/>
         <location filename="../cochran.c" line="406"/>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>rbt</source>
         <translation>pozostały czas denny</translation>
     </message>
@@ -7639,45 +7660,45 @@ Maximum</source>
         <location filename="../cochran.c" line="333"/>
         <location filename="../cochran.c" line="387"/>
         <location filename="../file.c" line="721"/>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>ascent</source>
         <translation>wynurzanie</translation>
     </message>
     <message>
         <location filename="../cochran.c" line="376"/>
         <location filename="../cochran.c" line="423"/>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>ceiling</source>
         <translation>sufit</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>workload</source>
         <translation>wysiłek</translation>
     </message>
     <message>
         <location filename="../cochran.c" line="392"/>
-        <location filename="../libdivecomputer.c" line="166"/>
+        <location filename="../libdivecomputer.c" line="199"/>
         <source>transmitter</source>
         <translation>nadajnik</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="166"/>
+        <location filename="../libdivecomputer.c" line="199"/>
         <source>violation</source>
         <translation>naruszenie</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="166"/>
+        <location filename="../libdivecomputer.c" line="199"/>
         <source>bookmark</source>
         <translation>notatka</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="166"/>
+        <location filename="../libdivecomputer.c" line="199"/>
         <source>surface</source>
         <translation>powierzchnia</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="166"/>
+        <location filename="../libdivecomputer.c" line="199"/>
         <source>safety stop</source>
         <translation>przystanek bezpieczeństwa</translation>
     </message>
@@ -7686,193 +7707,193 @@ Maximum</source>
         <location filename="../cochran.c" line="411"/>
         <location filename="../cochran.c" line="418"/>
         <location filename="../file.c" line="812"/>
-        <location filename="../libdivecomputer.c" line="167"/>
-        <location filename="../libdivecomputer.c" line="170"/>
+        <location filename="../libdivecomputer.c" line="200"/>
+        <location filename="../libdivecomputer.c" line="203"/>
         <source>gaschange</source>
         <translation>zmiana gazu</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="167"/>
+        <location filename="../libdivecomputer.c" line="200"/>
         <source>safety stop (voluntary)</source>
         <translation>przystanek bezpieczeństwa (opcjonalny)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="167"/>
+        <location filename="../libdivecomputer.c" line="200"/>
         <source>safety stop (mandatory)</source>
         <translation>przystanek bezpieczeństwa (obowiązkowy)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="168"/>
+        <location filename="../libdivecomputer.c" line="201"/>
         <source>deepstop</source>
         <translation>deepstop</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="168"/>
+        <location filename="../libdivecomputer.c" line="201"/>
         <source>ceiling (safety stop)</source>
         <translation>sufit (przystanek bezpieczeństwa)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="168"/>
+        <location filename="../libdivecomputer.c" line="201"/>
         <source>divetime</source>
         <translation>czas nurkowania</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="168"/>
+        <location filename="../libdivecomputer.c" line="201"/>
         <source>below floor</source>
         <comment>event showing dive is below deco floor and adding deco time</comment>
         <translation>poniżej podłogi deco</translation>
     </message>
     <message>
         <location filename="../cochran.c" line="350"/>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>maxdepth</source>
         <translation>Max głębokość</translation>
     </message>
     <message>
         <location filename="../cochran.c" line="345"/>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>OLF</source>
         <translation>OLF</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>airtime</source>
         <translation>Pozostały czas oddychania</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>rgbm</source>
         <translation>rgbm</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>heading</source>
         <translation>kierunek</translation>
     </message>
     <message>
         <location filename="../cochran.c" line="355"/>
         <location filename="../cochran.c" line="401"/>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>pO₂</source>
         <translation>pO₂</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="170"/>
+        <location filename="../libdivecomputer.c" line="203"/>
         <source>tissue level warning</source>
         <translation>Ostrzeżenie: poziom nasycenia tkanek</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="170"/>
+        <location filename="../libdivecomputer.c" line="203"/>
         <source>non stop time</source>
         <translation>czas bezdekompresyjny</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="187"/>
+        <location filename="../libdivecomputer.c" line="220"/>
         <source>invalid event number</source>
         <translation>niepoprawny znacznik</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="625"/>
+        <location filename="../libdivecomputer.c" line="658"/>
         <source>Unable to create parser for %s %s</source>
         <translation>Nie udało się utworzyć parsera dla %s %s</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="631"/>
+        <location filename="../libdivecomputer.c" line="664"/>
         <source>Error registering the data</source>
         <translation>Błąd podczas przetwarzania danych</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="462"/>
+        <location filename="../libdivecomputer.c" line="495"/>
         <source>Error parsing the datetime</source>
         <translation>Błąd podczas przetwarzania daty i czasu</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="480"/>
+        <location filename="../libdivecomputer.c" line="513"/>
         <source>Dive %d: %s</source>
         <translation>Nurkowanie %d: %s</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="486"/>
+        <location filename="../libdivecomputer.c" line="519"/>
         <source>Error parsing the divetime</source>
         <translation>Błąd podczas przetwarzania czasu nurkowania</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="496"/>
+        <location filename="../libdivecomputer.c" line="529"/>
         <source>Error parsing the maxdepth</source>
         <translation>Błąd podczas przetwarzania głębokości</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="515"/>
+        <location filename="../libdivecomputer.c" line="548"/>
         <source>Error parsing temperature</source>
         <translation>Błąd przy przetwarzaniu temperatury</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="535"/>
+        <location filename="../libdivecomputer.c" line="568"/>
         <source>Error parsing the gas mix count</source>
         <translation>Błąd podczas przetwarzania danych o ilości użytych rodzajów gazu</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="547"/>
+        <location filename="../libdivecomputer.c" line="580"/>
         <source>Error obtaining water salinity</source>
         <translation>Błąd podczas przetwarzania danych o zasoleniu</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="556"/>
+        <location filename="../libdivecomputer.c" line="589"/>
         <source>Error obtaining surface pressure</source>
         <translation>Błąd podczas przetwarzania danych o cienieniu atmosferycznym</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="581"/>
+        <location filename="../libdivecomputer.c" line="614"/>
         <source>Error obtaining divemode</source>
         <translation>Błąd odczytywania trybu pracy komputera nurkowego </translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="601"/>
+        <location filename="../libdivecomputer.c" line="634"/>
         <source>Error parsing the gas mix</source>
         <translation>Błąd podczas przetwarzania danych o użytym rodzaju gazu</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="651"/>
+        <location filename="../libdivecomputer.c" line="684"/>
         <source>Error parsing the samples</source>
         <translation>Błąd podczas przetwarzania próbek</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="788"/>
+        <location filename="../libdivecomputer.c" line="821"/>
         <source>Event: waiting for user action</source>
         <translation>Oczekiwanie na działanie użytkownika</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="796"/>
+        <location filename="../libdivecomputer.c" line="829"/>
         <source>model=%u (0x%08x), firmware=%u (0x%08x), serial=%u (0x%08x)</source>
         <translation>model=%u (0x%08x), firmware=%u (0x%08x), numer seryjny=%u (0x%08x)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="860"/>
+        <location filename="../libdivecomputer.c" line="893"/>
         <source>Error registering the event handler.</source>
         <translation>Błąd rejestracji uchwytu (event handler)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="865"/>
+        <location filename="../libdivecomputer.c" line="898"/>
         <source>Error registering the cancellation handler.</source>
         <translation>Błąd rejestracji uchwytu (cancellation handler)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="886"/>
+        <location filename="../libdivecomputer.c" line="919"/>
         <source>Dive data import error</source>
         <translation>Błąd podczas importowania danych</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="925"/>
+        <location filename="../libdivecomputer.c" line="958"/>
         <source>Unable to create libdivecomputer context</source>
         <translation>Nie można utworzyć kontekstu libdivecomputer</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="932"/>
+        <location filename="../libdivecomputer.c" line="965"/>
         <source>Unable to open %s %s (%s)</source>
         <translation>Nie udało się otworzyć %s %s (%s)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="956"/>
+        <location filename="../libdivecomputer.c" line="989"/>
         <source>Insufficient privileges to open the device %s %s (%s)</source>
         <translation>Brak uprawnień by otworzyć urządzenie %s %s (%s)</translation>
     </message>
@@ -8084,7 +8105,7 @@ Maximum</source>
         <translation>ean</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1126"/>
+        <location filename="../profile.c" line="1133"/>
         <source>@: %d:%02d
 D: %.1f%s
 </source>
@@ -8093,70 +8114,70 @@ D: %.1f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1129"/>
+        <location filename="../profile.c" line="1136"/>
         <source>P: %d%s
 </source>
         <translation>P: %d%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1133"/>
+        <location filename="../profile.c" line="1140"/>
         <source>T: %.1f%s
 </source>
         <translation>T: %.1f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1139"/>
+        <location filename="../profile.c" line="1146"/>
         <source>V: %.1f%s
 </source>
         <translation>V: %.1f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1142"/>
+        <location filename="../profile.c" line="1149"/>
         <source>SAC: %.*f%s/min
 </source>
         <translation>SAC: %.*f%s/min
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1144"/>
+        <location filename="../profile.c" line="1151"/>
         <source>CNS: %u%%
 </source>
         <translation>CNS: %u%%
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1146"/>
+        <location filename="../profile.c" line="1153"/>
         <source>pO%s: %.2fbar
 </source>
         <translation>pO%s: %.2fbar
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1148"/>
+        <location filename="../profile.c" line="1155"/>
         <source>pN%s: %.2fbar
 </source>
         <translation>pN%s: %.2fbar
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1150"/>
+        <location filename="../profile.c" line="1157"/>
         <source>pHe: %.2fbar
 </source>
         <translation>pHe: %.2fbar
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1153"/>
+        <location filename="../profile.c" line="1160"/>
         <source>MOD: %d%s
 </source>
         <translation>MOD: %d%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1160"/>
+        <location filename="../profile.c" line="1167"/>
         <source>EAD: %d%s
 EADD: %d%s
 </source>
@@ -8165,7 +8186,7 @@ EADD: %d%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1164"/>
+        <location filename="../profile.c" line="1171"/>
         <source>END: %d%s
 EADD: %d%s
 </source>
@@ -8174,35 +8195,35 @@ EADD: %d%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1176"/>
+        <location filename="../profile.c" line="1184"/>
         <source>Safetystop: %umin @ %.0f%s
 </source>
         <translation>Przystanek bezp.: %umin @ %.0f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1179"/>
+        <location filename="../profile.c" line="1187"/>
         <source>Safetystop: unkn time @ %.0f%s
 </source>
         <translation>Przystanek bezp.: nieznany czas @ %.0f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1184"/>
+        <location filename="../profile.c" line="1192"/>
         <source>Deco: %umin @ %.0f%s
 </source>
         <translation>Deco: %umin @ %.0f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1187"/>
+        <location filename="../profile.c" line="1195"/>
         <source>Deco: unkn time @ %.0f%s
 </source>
         <translation>Deco: nieznany czas @ %.0f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1191"/>
+        <location filename="../profile.c" line="1199"/>
         <source>In deco
 </source>
         <translation>dekompresja
@@ -8210,135 +8231,135 @@ EADD: %d%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1193"/>
+        <location filename="../profile.c" line="1201"/>
         <source>NDL: %umin
 </source>
         <translation>NDL: %umin
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1196"/>
+        <location filename="../profile.c" line="1204"/>
         <source>TTS: %umin
 </source>
         <translation>TTS: %umin
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1199"/>
+        <location filename="../profile.c" line="1207"/>
         <source>Deco: %umin @ %.0f%s (calc)
 </source>
         <translation>Deco: %umin @ %.0f%s (obliczone)
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1207"/>
+        <location filename="../profile.c" line="1215"/>
         <source>In deco (calc)
 </source>
         <translation>dekompresja (obliczone)
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1210"/>
+        <location filename="../profile.c" line="1218"/>
         <source>NDL: %umin (calc)
 </source>
         <translation>NDL: %umin (calc)
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1212"/>
+        <location filename="../profile.c" line="1220"/>
         <source>NDL: &gt;2h (calc)
 </source>
         <translation>NDL: &gt;2h
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1216"/>
+        <location filename="../profile.c" line="1224"/>
         <source>TTS: %umin (calc)
 </source>
         <translation>TTS: %umin (calc)
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1218"/>
+        <location filename="../profile.c" line="1226"/>
         <source>TTS: &gt;2h (calc)
 </source>
         <translation>TTS: &gt;2h
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1221"/>
+        <location filename="../profile.c" line="1229"/>
         <source>RBT: %umin
 </source>
         <translation>RBT: %umin
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1224"/>
+        <location filename="../profile.c" line="1232"/>
         <source>Calculated ceiling %.0f%s
 </source>
         <translation>Obliczony sufit:  %.0f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1230"/>
+        <location filename="../profile.c" line="1238"/>
         <source>Tissue %.0fmin: %.1f%s
 </source>
         <translation>Tkanka %.0fmin: %.1f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1236"/>
+        <location filename="../profile.c" line="1244"/>
         <source>heartbeat: %d
 </source>
         <translation>tętno: %d
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1238"/>
+        <location filename="../profile.c" line="1246"/>
         <source>bearing: %d
 </source>
         <translation>kurs: %d
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1241"/>
+        <location filename="../profile.c" line="1249"/>
         <source>mean depth to here %.1f%s
 </source>
         <translation>gł. średnia do teraz %.1f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1336"/>
+        <location filename="../profile.c" line="1344"/>
         <source>%sT: %d:%02d min</source>
         <translation>%sT: %d:%02d min</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1340"/>
-        <location filename="../profile.c" line="1344"/>
         <location filename="../profile.c" line="1348"/>
+        <location filename="../profile.c" line="1352"/>
+        <location filename="../profile.c" line="1356"/>
         <source>%s %sD:%.1f%s</source>
         <translation>%s %sGł:%.1f%s</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1352"/>
+        <location filename="../profile.c" line="1360"/>
         <source>%s %sD:%.1f%s
 </source>
         <translation>%s %sGł:%.1f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1356"/>
+        <location filename="../profile.c" line="1364"/>
         <source>%s%sV:%.2f%s</source>
         <translation>%s%sV:%.2f%s</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1360"/>
-        <location filename="../profile.c" line="1364"/>
+        <location filename="../profile.c" line="1368"/>
+        <location filename="../profile.c" line="1372"/>
         <source>%s %sV:%.2f%s</source>
         <translation>%s %sV:%.2f%s</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1371"/>
+        <location filename="../profile.c" line="1379"/>
         <source>%s %sP:%d %s</source>
         <translation>%s %sP:%d %s</translation>
     </message>
@@ -8373,16 +8394,6 @@ EADD: %d%s
         <translation>F</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1019"/>
-        <source>%1 %2 (%3 dives)</source>
-        <translation>%1 %2 (%3 dives)</translation>
-    </message>
-    <message>
-        <location filename="../qthelper.cpp" line="1024"/>
-        <source>%1 %2 (1 dive)</source>
-        <translation>%1 %2 (1 nurkowanie)</translation>
-    </message>
-    <message>
         <location filename="../dive.c" line="23"/>
         <source>boat</source>
         <translation>z łodzi</translation>
@@ -8656,42 +8667,47 @@ EADD: %d%s
         <translation>więcej niż %d dni</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="220"/>
+        <location filename="../statistics.c" line="221"/>
         <source>%dd %dh %dmin</source>
         <translation>%dd %dh %dmin</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="222"/>
+        <location filename="../statistics.c" line="224"/>
+        <source>%dmin %dsecs</source>
+        <translation type="unfinished"/>
+    </message>
+    <message>
+        <location filename="../statistics.c" line="226"/>
         <source>%dh %dmin</source>
         <translation>%dh %dmin</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="234"/>
+        <location filename="../statistics.c" line="238"/>
         <source>for dives #</source>
         <translation>dla nurkowania nr</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="240"/>
+        <location filename="../statistics.c" line="244"/>
         <source>for selected dives</source>
         <translation>dla wybranych nurkowań</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="275"/>
+        <location filename="../statistics.c" line="279"/>
         <source>for dive #%d</source>
         <translation>dla nurkowania #%d</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="277"/>
+        <location filename="../statistics.c" line="281"/>
         <source>for selected dive</source>
         <translation>dla wybranego nurkowania</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="279"/>
+        <location filename="../statistics.c" line="283"/>
         <source>for all dives</source>
         <translation>dla wszystkich nurkowań</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="281"/>
+        <location filename="../statistics.c" line="285"/>
         <source>(no dives)</source>
         <translation>(brak nurkowań)</translation>
     </message>
@@ -8791,7 +8807,7 @@ EADD: %d%s
         <translation>Gru</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="154"/>
+        <location filename="../libdivecomputer.c" line="187"/>
         <location filename="../parse-xml.c" line="3177"/>
         <location filename="../uemis-downloader.c" line="133"/>
         <source>unknown</source>