Pull latest translations

Signed-off-by: Dirk Hohndel <dirk@hohndel.org>

1 files changed, 351 insertions, 335 deletions

diff --git a/translations/subsurface_zh_TW.ts b/translations/subsurface_zh_TW.ts
index e58605d44..af43958e5 100644
--- a/translations/subsurface_zh_TW.ts
+++ b/translations/subsurface_zh_TW.ts
@@ -258,12 +258,12 @@
 <context>
     <name>BuddyFilter</name>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="613"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="612"/>
         <source>Person: </source>
         <translation>人名：</translation>
     </message>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="614"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="613"/>
         <source>Searches for buddies and divemasters</source>
         <translation>搜尋潛伴與潛導</translation>
     </message>
@@ -1716,17 +1716,17 @@
         <translation>使用</translation>
     </message>
     <message>
-        <location filename="../qt-models/cylindermodel.cpp" line="124"/>
+        <location filename="../qt-models/cylindermodel.cpp" line="132"/>
         <source>Clicking here will remove this cylinder.</source>
         <translation>於此處按下將移除此氣瓶.</translation>
     </message>
     <message>
-        <location filename="../qt-models/cylindermodel.cpp" line="342"/>
+        <location filename="../qt-models/cylindermodel.cpp" line="350"/>
         <source>Cylinder cannot be removed</source>
         <translation>氣瓶無法移除</translation>
     </message>
     <message>
-        <location filename="../qt-models/cylindermodel.cpp" line="343"/>
+        <location filename="../qt-models/cylindermodel.cpp" line="351"/>
         <source>This gas is in use. Only cylinders that are not used in the dive can be removed.</source>
         <translation>此氣瓶仍在使用中，在潛水中，只有未使用的氣瓶可被移除。</translation>
     </message>
@@ -1899,104 +1899,6 @@
     </message>
 </context>
 <context>
-    <name>DiveItem</name>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="192"/>
-        <source>#</source>
-        <translation>#</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="195"/>
-        <source>Date</source>
-        <translation>日期</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="198"/>
-        <source>Rating</source>
-        <translation>評分</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="201"/>
-        <source>Depth(%1)</source>
-        <translation>深度(%1)</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="201"/>
-        <source>m</source>
-        <translation>m</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="201"/>
-        <source>ft</source>
-        <translation>ft</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="204"/>
-        <source>Duration</source>
-        <translation>區間</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="207"/>
-        <source>Temp(%1%2)</source>
-        <translation>溫度(%1%2)</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="210"/>
-        <source>Weight(%1)</source>
-        <translation>重量(%1)</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="210"/>
-        <source>kg</source>
-        <translation>kg</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="210"/>
-        <source>lbs</source>
-        <translation>lbs</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="213"/>
-        <source>Suit</source>
-        <translation>防寒衣</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="216"/>
-        <source>Cyl</source>
-        <translation>氣瓶</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="219"/>
-        <source>Gas</source>
-        <translation>氣體</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="224"/>
-        <source>SAC(%1)</source>
-        <translation>SAC(%1)</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="224"/>
-        <source>/min</source>
-        <translation>/min</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="227"/>
-        <source>OTU</source>
-        <translation>氧容許量 OTU</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="230"/>
-        <source>Max CNS</source>
-        <translation>最大 CNS</translation>
-    </message>
-    <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="233"/>
-        <source>Location</source>
-        <translation>位置</translation>
-    </message>
-</context>
-<context>
     <name>DiveListView</name>
     <message>
         <location filename="../qt-ui/divelistview.cpp" line="845"/>
@@ -2097,12 +1999,12 @@
 <context>
     <name>DiveLocationModel</name>
     <message>
-        <location filename="../qt-ui/locationinformation.cpp" line="323"/>
+        <location filename="../qt-ui/locationinformation.cpp" line="327"/>
         <source>Create a new dive site, copying relevant information from the current dive.</source>
         <translation>建立新的潛點, 從潛水紀錄複製相關資訊. </translation>
     </message>
     <message>
-        <location filename="../qt-ui/locationinformation.cpp" line="324"/>
+        <location filename="../qt-ui/locationinformation.cpp" line="328"/>
         <source>Create a new dive site with this name</source>
         <translation>以此名稱建立新的潛點</translation>
     </message>
@@ -2788,32 +2690,32 @@
 <context>
     <name>DivePlannerPointsModel</name>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="129"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="134"/>
         <source>unknown</source>
         <translation>未知</translation>
     </message>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="306"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="311"/>
         <source>Final depth</source>
         <translation>最後深度</translation>
     </message>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="308"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="313"/>
         <source>Run time</source>
         <translation>持續時間</translation>
     </message>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="310"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="315"/>
         <source>Duration</source>
         <translation>區間</translation>
     </message>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="312"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="317"/>
         <source>Used gas</source>
         <translation>使用氣量</translation>
     </message>
     <message>
-        <location filename="../qt-models/diveplannermodel.cpp" line="314"/>
+        <location filename="../qt-models/diveplannermodel.cpp" line="319"/>
         <source>CC setpoint</source>
         <translation>CC 設定點</translation>
     </message>
@@ -3022,127 +2924,127 @@ p, li { white-space: pre-wrap; }
 <context>
     <name>DiveTripModel</name>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="393"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="439"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="395"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="441"/>
         <source>#</source>
         <translation>#</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="396"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="442"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="398"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="444"/>
         <source>Date</source>
         <translation>日期</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="399"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="445"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="401"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="447"/>
         <source>Rating</source>
         <translation>評分</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="402"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="404"/>
         <source>Depth</source>
         <translation>深度</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="408"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="410"/>
         <source>Temp</source>
         <translation>溫度</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="411"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="413"/>
         <source>Weight</source>
         <translation>重量</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="423"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="425"/>
         <source>SAC</source>
         <translation>耗氣率</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="448"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="450"/>
         <source>m</source>
         <translation>m</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="448"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="450"/>
         <source>ft</source>
         <translation>ft</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="457"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="459"/>
         <source>Weight(%1)</source>
         <translation>重量(%1)</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="414"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="460"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="416"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="462"/>
         <source>Suit</source>
         <translation>防寒衣</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="417"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="463"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="419"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="465"/>
         <source>Cyl</source>
         <translation>氣瓶</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="420"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="466"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="422"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="468"/>
         <source>Gas</source>
         <translation>氣體</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="471"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="473"/>
         <source>SAC(%1)</source>
         <translation>SAC(%1)</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="471"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="473"/>
         <source>/min</source>
         <translation>/min</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="429"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="477"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="431"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="479"/>
         <source>Max CNS</source>
         <translation>最大 CNS</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="432"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="480"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="434"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="482"/>
         <source>Location</source>
         <translation>位置</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="457"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="459"/>
         <source>kg</source>
         <translation>kg</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="448"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="450"/>
         <source>Depth(%1)</source>
         <translation>深度(%1)</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="405"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="451"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="407"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="453"/>
         <source>Duration</source>
         <translation>區間</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="454"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="456"/>
         <source>Temp(%1%2)</source>
         <translation>溫度(%1%2)</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="457"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="459"/>
         <source>lbs</source>
         <translation>lbs</translation>
     </message>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="426"/>
-        <location filename="../qt-models/divetripmodel.cpp" line="474"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="428"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="476"/>
         <source>OTU</source>
         <translation>氧容許量 OTU</translation>
     </message>
@@ -3536,7 +3438,7 @@ p, li { white-space: pre-wrap; }
 <context>
     <name>LocationFilter</name>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="640"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="639"/>
         <source>Location: </source>
         <translation>位置：</translation>
     </message>
@@ -3662,7 +3564,7 @@ p, li { white-space: pre-wrap; }
     </message>
     <message>
         <location filename="../qt-ui/locationinformation.cpp" line="31"/>
-        <location filename="../qt-ui/locationinformation.cpp" line="216"/>
+        <location filename="../qt-ui/locationinformation.cpp" line="217"/>
         <source>Dive site management</source>
         <translation>潛點管理</translation>
     </message>
@@ -3684,7 +3586,7 @@ p, li { white-space: pre-wrap; }
 請注意是否要繼續? </translation>
     </message>
     <message>
-        <location filename="../qt-ui/locationinformation.cpp" line="223"/>
+        <location filename="../qt-ui/locationinformation.cpp" line="224"/>
         <source>You are editing a dive site</source>
         <translation>您正在編輯潛點</translation>
     </message>
@@ -3994,6 +3896,26 @@ p, li { white-space: pre-wrap; }
         <translation>新增配重系統</translation>
     </message>
     <message>
+        <location filename="../qt-ui/maintab.cpp" line="98"/>
+        <source>OC</source>
+        <translation>OC</translation>
+    </message>
+    <message>
+        <location filename="../qt-ui/maintab.cpp" line="98"/>
+        <source>CCR</source>
+        <translation>CCR</translation>
+    </message>
+    <message>
+        <location filename="../qt-ui/maintab.cpp" line="98"/>
+        <source>pSCR</source>
+        <translation>pSCR</translation>
+    </message>
+    <message>
+        <location filename="../qt-ui/maintab.cpp" line="98"/>
+        <source>Freedive</source>
+        <translation type="unfinished"/>
+    </message>
+    <message>
         <location filename="../qt-ui/maintab.cpp" line="307"/>
         <source>Air temp. [%1]</source>
         <translation>氣溫 [%1]</translation>
@@ -4031,69 +3953,69 @@ p, li { white-space: pre-wrap; }
     </message>
     <message>
         <location filename="../qt-ui/maintab.cpp" line="606"/>
-        <location filename="../qt-ui/maintab.cpp" line="638"/>
         <location filename="../qt-ui/maintab.cpp" line="642"/>
         <location filename="../qt-ui/maintab.cpp" line="646"/>
+        <location filename="../qt-ui/maintab.cpp" line="650"/>
         <source>/min</source>
         <translation>/min</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="635"/>
+        <location filename="../qt-ui/maintab.cpp" line="639"/>
         <source>Deepest dive</source>
         <translation>最深的潛水</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="636"/>
+        <location filename="../qt-ui/maintab.cpp" line="640"/>
         <source>Shallowest dive</source>
         <translation>最淺的潛水</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="649"/>
+        <location filename="../qt-ui/maintab.cpp" line="653"/>
         <source>Highest total SAC of a dive</source>
         <translation>潛水最高總SAC</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="650"/>
+        <location filename="../qt-ui/maintab.cpp" line="654"/>
         <source>Lowest total SAC of a dive</source>
         <translation>潛水最低總SAC</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="651"/>
+        <location filename="../qt-ui/maintab.cpp" line="655"/>
         <source>Average total SAC of all selected dives</source>
         <translation>所選擇的潛水，平均總SAC</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="662"/>
+        <location filename="../qt-ui/maintab.cpp" line="666"/>
         <source>Highest temperature</source>
         <translation>最高溫度</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="663"/>
+        <location filename="../qt-ui/maintab.cpp" line="667"/>
         <source>Lowest temperature</source>
         <translation>最低溫度</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="664"/>
+        <location filename="../qt-ui/maintab.cpp" line="668"/>
         <source>Average temperature of all selected dives</source>
         <translation>所選取潛水的平均溫度</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="674"/>
+        <location filename="../qt-ui/maintab.cpp" line="678"/>
         <source>Longest dive</source>
         <translation>最長潛水</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="675"/>
+        <location filename="../qt-ui/maintab.cpp" line="679"/>
         <source>Shortest dive</source>
         <translation>最短潛水</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="676"/>
+        <location filename="../qt-ui/maintab.cpp" line="680"/>
         <source>Average length of all selected dives</source>
         <translation>所選取潛水的平均時間</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="700"/>
+        <location filename="../qt-ui/maintab.cpp" line="704"/>
         <source>These gases could be
 mixed from Air and using:
 </source>
@@ -4102,22 +4024,22 @@ mixed from Air and using:
 </translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="704"/>
+        <location filename="../qt-ui/maintab.cpp" line="708"/>
         <source> and </source>
         <translation>與</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="834"/>
+        <location filename="../qt-ui/maintab.cpp" line="838"/>
         <source>New dive site</source>
         <translation>新的潛點</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="1128"/>
+        <location filename="../qt-ui/maintab.cpp" line="1132"/>
         <source>Discard the changes?</source>
         <translation>取消變更？</translation>
     </message>
     <message>
-        <location filename="../qt-ui/maintab.cpp" line="1129"/>
+        <location filename="../qt-ui/maintab.cpp" line="1133"/>
         <source>You are about to discard your changes.</source>
         <translation>您將要放棄您的變更。</translation>
     </message>
@@ -4270,7 +4192,7 @@ mixed from Air and using:
     <message>
         <location filename="../qt-ui/mainwindow.ui" line="171"/>
         <location filename="../build/ui_mainwindow.h" line="460"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="362"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="407"/>
         <source>Open</source>
         <translation>開啟</translation>
     </message>
@@ -4523,7 +4445,7 @@ mixed from Air and using:
     <message>
         <location filename="../qt-ui/mainwindow.ui" line="698"/>
         <location filename="../build/ui_mainwindow.h" line="560"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="226"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="225"/>
         <source>&amp;Undo</source>
         <translation>復原</translation>
     </message>
@@ -4536,7 +4458,7 @@ mixed from Air and using:
     <message>
         <location filename="../qt-ui/mainwindow.ui" line="706"/>
         <location filename="../build/ui_mainwindow.h" line="562"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="227"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="226"/>
         <source>&amp;Redo</source>
         <translation>取消還原</translation>
     </message>
@@ -4771,144 +4693,144 @@ mixed from Air and using:
         <translation>F11</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="359"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="404"/>
         <source>Open file</source>
         <translation>開啟檔案</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="363"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="468"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="1853"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="408"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="513"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1903"/>
         <source>Cancel</source>
         <translation>取消</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="464"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="509"/>
         <source>Traverse image directories</source>
         <translation>經過照片路徑</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="467"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="512"/>
         <source>Scan</source>
         <translation>掃描</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="475"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="520"/>
         <source>Scanning images...(this can take a while)</source>
         <translation>掃描影像...(需要稍待一段時間)</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="528"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="573"/>
         <source>Please save or cancel the current dive edit before closing the file.</source>
         <translation>在關閉檔案前，請儲存或取消此次潛水的編輯。</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="646"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="691"/>
         <source>Please save or cancel the current dive edit before trying to add a dive.</source>
         <translation>在新增潛水前，請先儲存或取消此次潛水的編輯。</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="697"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="743"/>
         <source>Print runtime table</source>
         <translation>列印操作表格</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="802"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="849"/>
         <source>Trying to edit a dive that&apos;s not a manually added dive.</source>
         <translation>嘗試編輯非手動建立的潛水記錄. </translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1060"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1110"/>
         <source>Do you want to save the changes that you made in the file %1?</source>
         <translation>您是否要對檔案 %1 所做的修改儲存? </translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1063"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1113"/>
         <source>Do you want to save the changes that you made in the data file?</source>
         <translation>您是否要對資料檔案所做的修改進行儲存? </translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1068"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1118"/>
         <source>Save changes?</source>
         <translation>儲存變更? </translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1435"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1485"/>
         <source>Save file as</source>
         <translation>另存新檔</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1530"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1580"/>
         <source>[cloud storage for] %1</source>
         <translation>[雲端裝置] %1</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1630"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1680"/>
         <source>Opening datafile from older version</source>
         <translation>從較舊的版本中開啟資料檔案</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1631"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1681"/>
         <source>You opened a data file from an older version of Subsurface. We recommend you read the manual to learn about the changes in the new version, especially about dive site management which has changed significantly.
 Subsurface has already tried to pre-populate the data but it might be worth while taking a look at the new dive site management system and to make sure that everything looks correct.</source>
         <translation>自舊版的 Subsurface 開啟資料檔案. 建議請先在新版程式中, 閱讀相關變更, 特別是有關潛點管理的部分. 
 Subsurface 已嘗試預先填寫部分資料, 值得花些時間看看新的潛點管理系統, 並確認資料是否正確. </translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1642"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1692"/>
         <source>Open dive log file</source>
         <translation>打開潛水日誌檔案</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1643"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1693"/>
         <source>Dive log files (*.ssrf *.can *.csv *.db *.sql *.dld *.jlb *.lvd *.sde *.udcf *.uddf *.xml *.txt *.dlf *.apd*.SSRF *.CAN *.CSV *.DB *.SQL *.DLD *.JLB *.LVD *.SDE *.UDCF *.UDDF *.xml *.TXT *.DLF *.APD);;Cochran files (*.can *.CAN);;CSV files (*.csv *.CSV);;DiveLog.de files (*.dld *.DLD);;JDiveLog files (*.jlb *.JLB);;Liquivision files (*.lvd *.LVD);;MkVI files (*.txt *.TXT);;Suunto files (*.sde *.db *.SDE *.DB);;Divesoft files (*.dlf *.DLF);;UDDF/UDCF files (*.uddf *.udcf *.UDDF *.UDCF);;XML files (*.xml *.XML);;APD log viewer (*.apd *.APD);;Datatrak/WLog Files (*.log *.LOG);;OSTCtools Files (*.dive *.DIVE);;All files (*)</source>
         <translation>Dive log files (*.ssrf *.can *.csv *.db *.sql *.dld *.jlb *.lvd *.sde *.udcf *.uddf *.xml *.txt *.dlf *.apd*.SSRF *.CAN *.CSV *.DB *.SQL *.DLD *.JLB *.LVD *.SDE *.UDCF *.UDDF *.xml *.TXT *.DLF *.APD);;Cochran files (*.can *.CAN);;CSV files (*.csv *.CSV);;DiveLog.de files (*.dld *.DLD);;JDiveLog files (*.jlb *.JLB);;Liquivision files (*.lvd *.LVD);;MkVI files (*.txt *.TXT);;Suunto files (*.sde *.db *.SDE *.DB);;Divesoft files (*.dlf *.DLF);;UDDF/UDCF files (*.uddf *.udcf *.UDDF *.UDCF);;XML files (*.xml *.XML);;APD log viewer (*.apd *.APD);;Datatrak/WLog Files (*.log *.LOG);;OSTCtools Files (*.dive *.DIVE);;All files (*)</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1853"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1903"/>
         <source>Contacting cloud service...</source>
         <translation>聯絡雲端服務...</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1069"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1119"/>
         <source>Changes will be lost if you don&apos;t save them.</source>
         <translation>如果不進行儲存，所做變更將會遺失。</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="503"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="646"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="725"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="796"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="802"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="1688"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="548"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="691"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="771"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="843"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="849"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1738"/>
         <source>Warning</source>
         <translation>提醒</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="353"/>
         <location filename="../qt-ui/mainwindow.cpp" line="398"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="1408"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="443"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1458"/>
         <source>Please save or cancel the current dive edit before opening a new file.</source>
         <translation>在開啟新檔前，請儲存或取消此次潛水的編輯。</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="725"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="771"/>
         <source>Trying to replan a dive that&apos;s not a planned dive.</source>
         <translation>嘗試針對非原計畫的潛水進行重新規畫. </translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="849"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="896"/>
         <source>Yearly statistics</source>
         <translation>年統計</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="1436"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1486"/>
         <source>Subsurface XML files (*.ssrf *.xml *.XML)</source>
         <translation>Subsurface XML 檔案 (*.ssrf *.xml *.XML)</translation>
     </message>
     <message>
-        <location filename="../qt-ui/mainwindow.cpp" line="796"/>
-        <location filename="../qt-ui/mainwindow.cpp" line="1688"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="843"/>
+        <location filename="../qt-ui/mainwindow.cpp" line="1738"/>
         <source>Please, first finish the current edition before trying to do another.</source>
         <translation>請在嘗試其他編輯時先完成當前編輯</translation>
     </message>
@@ -4926,7 +4848,7 @@ Subsurface 已嘗試預先填寫部分資料, 值得花些時間看看新的潛�
 <context>
     <name>MultiFilter</name>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="725"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="724"/>
         <source>Filter shows %1 (of %2) dives</source>
         <translation>過濾器顯示 %1 (of %2) 潛水</translation>
     </message>
@@ -6044,12 +5966,12 @@ Please start Bluetooth on your OSTC Sport and do the same preparations as for a
 <context>
     <name>QObject</name>
     <message>
-        <location filename="../qthelper.cpp" line="1255"/>
+        <location filename="../qthelper.cpp" line="1310"/>
         <source>AIR</source>
         <translation>空氣</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1255"/>
+        <location filename="../qthelper.cpp" line="1310"/>
         <source>OXYGEN</source>
         <translation>OXYGEN</translation>
     </message>
@@ -6089,42 +6011,53 @@ Please start Bluetooth on your OSTC Sport and do the same preparations as for a
         <translation>min</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1269"/>
+        <location filename="../qthelper.cpp" line="1072"/>
+        <location filename="../qthelper.cpp" line="1074"/>
+        <source>(%1 dives)</source>
+        <translation type="unfinished"/>
+    </message>
+    <message>
+        <location filename="../qthelper.cpp" line="1077"/>
+        <source>(1 dive)</source>
+        <translation type="unfinished"/>
+    </message>
+    <message>
+        <location filename="../qthelper.cpp" line="1324"/>
         <source>kg</source>
         <translation>kg</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1270"/>
+        <location filename="../qthelper.cpp" line="1325"/>
         <source>lbs</source>
         <translation>lbs</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1293"/>
+        <location filename="../qthelper.cpp" line="1348"/>
         <source>ft</source>
         <translation>ft</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1294"/>
+        <location filename="../qthelper.cpp" line="1349"/>
         <source>m</source>
         <translation>m</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1316"/>
+        <location filename="../qthelper.cpp" line="1371"/>
         <source>psi</source>
         <translation>psi</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1317"/>
+        <location filename="../qthelper.cpp" line="1372"/>
         <source>bar</source>
         <translation>bar</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1339"/>
+        <location filename="../qthelper.cpp" line="1394"/>
         <source>l</source>
         <translation>l</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1340"/>
+        <location filename="../qthelper.cpp" line="1395"/>
         <source>cuft</source>
         <translation>cuft</translation>
     </message>
@@ -6600,7 +6533,7 @@ Not all images have timestamps in the range between
 <context>
     <name>SuitFilter</name>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="666"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="665"/>
         <source>Suits: </source>
         <translation>潛水衣: </translation>
     </message>
@@ -6627,7 +6560,7 @@ Not all images have timestamps in the range between
 <context>
     <name>TagFilter</name>
     <message>
-        <location filename="../qt-ui/simplewidgets.cpp" line="587"/>
+        <location filename="../qt-ui/simplewidgets.cpp" line="586"/>
         <source>Tags: </source>
         <translation>標籤:</translation>
     </message>
@@ -6821,17 +6754,10 @@ Not all images have timestamps in the range between
         <translation>顏色 6</translation>
     </message>
     <message>
-        <location filename="../qt-ui/templateedit.cpp" line="135"/>
+        <location filename="../qt-ui/templateedit.cpp" line="133"/>
         <source>Do you want to save your changes?</source>
         <translation>是否要儲存設定? </translation>
     </message>
-    <message>
-        <location filename="../qt-ui/templateedit.cpp" line="140"/>
-        <source>You are about to modify a template bundled with Subsurface.
-</source>
-        <translation>您正在修改 Subsurface 設定的樣板.
-</translation>
-    </message>
 </context>
 <context>
     <name>TestParse</name>
@@ -6915,10 +6841,105 @@ Not all images have timestamps in the range between
 <context>
     <name>TripItem</name>
     <message>
-        <location filename="../qt-models/divetripmodel.cpp" line="65"/>
+        <location filename="../qt-models/divetripmodel.cpp" line="67"/>
         <source>(%1 shown)</source>
         <translation>(%1 顯示)</translation>
     </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="194"/>
+        <source>#</source>
+        <translation>#</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="197"/>
+        <source>Date</source>
+        <translation>日期</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="200"/>
+        <source>Rating</source>
+        <translation>評分</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="203"/>
+        <source>Depth(%1)</source>
+        <translation>深度(%1)</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="203"/>
+        <source>m</source>
+        <translation>m</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="203"/>
+        <source>ft</source>
+        <translation>ft</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="206"/>
+        <source>Duration</source>
+        <translation>區間</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="209"/>
+        <source>Temp(%1%2)</source>
+        <translation>溫度(%1%2)</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="212"/>
+        <source>Weight(%1)</source>
+        <translation>重量(%1)</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="212"/>
+        <source>kg</source>
+        <translation>kg</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="212"/>
+        <source>lbs</source>
+        <translation>lbs</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="215"/>
+        <source>Suit</source>
+        <translation>防寒衣</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="218"/>
+        <source>Cyl</source>
+        <translation>氣瓶</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="221"/>
+        <source>Gas</source>
+        <translation>氣體</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="226"/>
+        <source>SAC(%1)</source>
+        <translation>SAC(%1)</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="226"/>
+        <source>/min</source>
+        <translation>/min</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="229"/>
+        <source>OTU</source>
+        <translation>氧容許量 OTU</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="232"/>
+        <source>Max CNS</source>
+        <translation>最大 CNS</translation>
+    </message>
+    <message>
+        <location filename="../qt-models/divetripmodel.cpp" line="235"/>
+        <source>Location</source>
+        <translation>位置</translation>
+    </message>
 </context>
 <context>
     <name>URLDialog</name>
@@ -7016,8 +7037,8 @@ Not all images have timestamps in the range between
         <translation>使用者說明</translation>
     </message>
     <message>
-        <location filename="../qt-ui/usermanual.cpp" line="71"/>
-        <location filename="../qt-ui/usermanual.cpp" line="77"/>
+        <location filename="../qt-ui/usermanual.cpp" line="74"/>
+        <location filename="../qt-ui/usermanual.cpp" line="80"/>
         <source>Cannot find the Subsurface manual</source>
         <translation>無法找到 Subsurface 使用說明</translation>
     </message>
@@ -7432,7 +7453,7 @@ Maximum</source>
 <context>
     <name>getextFromC</name>
     <message>
-        <location filename="../libdivecomputer.c" line="641"/>
+        <location filename="../libdivecomputer.c" line="674"/>
         <source>Error parsing the header</source>
         <translation>檔頭解析錯誤</translation>
     </message>
@@ -7511,7 +7532,7 @@ Maximum</source>
         <translation>kg</translation>
     </message>
     <message>
-        <location filename="../dive.c" line="1579"/>
+        <location filename="../dive.c" line="1580"/>
         <source>(%s) or (%s)</source>
         <translation>(%s) 或 (%s)</translation>
     </message>
@@ -7615,7 +7636,7 @@ Maximum</source>
         <translation>檔案 &apos;%s&apos; 尋無匹配的 DC</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>none</source>
         <translation>無</translation>
     </message>
@@ -7623,7 +7644,7 @@ Maximum</source>
         <location filename="../cochran.c" line="306"/>
         <location filename="../cochran.c" line="312"/>
         <location filename="../cochran.c" line="382"/>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>deco stop</source>
         <translation>減壓停留</translation>
     </message>
@@ -7636,7 +7657,7 @@ Maximum</source>
     <message>
         <location filename="../cochran.c" line="367"/>
         <location filename="../cochran.c" line="406"/>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>rbt</source>
         <translation>剩餘滯底時間</translation>
     </message>
@@ -7644,45 +7665,45 @@ Maximum</source>
         <location filename="../cochran.c" line="333"/>
         <location filename="../cochran.c" line="387"/>
         <location filename="../file.c" line="721"/>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>ascent</source>
         <translation>上升</translation>
     </message>
     <message>
         <location filename="../cochran.c" line="376"/>
         <location filename="../cochran.c" line="423"/>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>ceiling</source>
         <translation>上限深度</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="165"/>
+        <location filename="../libdivecomputer.c" line="198"/>
         <source>workload</source>
         <translation>工作量</translation>
     </message>
     <message>
         <location filename="../cochran.c" line="392"/>
-        <location filename="../libdivecomputer.c" line="166"/>
+        <location filename="../libdivecomputer.c" line="199"/>
         <source>transmitter</source>
         <translation>發射器</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="166"/>
+        <location filename="../libdivecomputer.c" line="199"/>
         <source>violation</source>
         <translation>違反</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="166"/>
+        <location filename="../libdivecomputer.c" line="199"/>
         <source>bookmark</source>
         <translation>書籤</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="166"/>
+        <location filename="../libdivecomputer.c" line="199"/>
         <source>surface</source>
         <translation>水面</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="166"/>
+        <location filename="../libdivecomputer.c" line="199"/>
         <source>safety stop</source>
         <translation>安全停留</translation>
     </message>
@@ -7691,193 +7712,193 @@ Maximum</source>
         <location filename="../cochran.c" line="411"/>
         <location filename="../cochran.c" line="418"/>
         <location filename="../file.c" line="812"/>
-        <location filename="../libdivecomputer.c" line="167"/>
-        <location filename="../libdivecomputer.c" line="170"/>
+        <location filename="../libdivecomputer.c" line="200"/>
+        <location filename="../libdivecomputer.c" line="203"/>
         <source>gaschange</source>
         <translation>氣瓶更換</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="167"/>
+        <location filename="../libdivecomputer.c" line="200"/>
         <source>safety stop (voluntary)</source>
         <translation>安全停留 (非必要)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="167"/>
+        <location filename="../libdivecomputer.c" line="200"/>
         <source>safety stop (mandatory)</source>
         <translation>安全停留 (強制性)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="168"/>
+        <location filename="../libdivecomputer.c" line="201"/>
         <source>deepstop</source>
         <translation>深停留</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="168"/>
+        <location filename="../libdivecomputer.c" line="201"/>
         <source>ceiling (safety stop)</source>
         <translation>上限深度 (安全停留)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="168"/>
+        <location filename="../libdivecomputer.c" line="201"/>
         <source>divetime</source>
         <translation>潛水時間</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="168"/>
+        <location filename="../libdivecomputer.c" line="201"/>
         <source>below floor</source>
         <comment>event showing dive is below deco floor and adding deco time</comment>
         <translation>below floor</translation>
     </message>
     <message>
         <location filename="../cochran.c" line="350"/>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>maxdepth</source>
         <translation>最大深度</translation>
     </message>
     <message>
         <location filename="../cochran.c" line="345"/>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>OLF</source>
         <translation>OLF</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>airtime</source>
         <translation>空氣時間</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>rgbm</source>
         <translation>rgbm</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>heading</source>
         <translation>標題</translation>
     </message>
     <message>
         <location filename="../cochran.c" line="355"/>
         <location filename="../cochran.c" line="401"/>
-        <location filename="../libdivecomputer.c" line="169"/>
+        <location filename="../libdivecomputer.c" line="202"/>
         <source>pO₂</source>
         <translation>pO₂</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="170"/>
+        <location filename="../libdivecomputer.c" line="203"/>
         <source>tissue level warning</source>
         <translation>組織等級警告</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="170"/>
+        <location filename="../libdivecomputer.c" line="203"/>
         <source>non stop time</source>
         <translation>無停留時間</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="187"/>
+        <location filename="../libdivecomputer.c" line="220"/>
         <source>invalid event number</source>
         <translation>錯誤的事件編號</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="625"/>
+        <location filename="../libdivecomputer.c" line="658"/>
         <source>Unable to create parser for %s %s</source>
         <translation>無法建立解析 %s %s</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="631"/>
+        <location filename="../libdivecomputer.c" line="664"/>
         <source>Error registering the data</source>
         <translation>錯誤的登錄資料</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="462"/>
+        <location filename="../libdivecomputer.c" line="495"/>
         <source>Error parsing the datetime</source>
         <translation>日期時間解析錯誤</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="480"/>
+        <location filename="../libdivecomputer.c" line="513"/>
         <source>Dive %d: %s</source>
         <translation>潛水 %d: %s</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="486"/>
+        <location filename="../libdivecomputer.c" line="519"/>
         <source>Error parsing the divetime</source>
         <translation>潛水時間解析錯誤</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="496"/>
+        <location filename="../libdivecomputer.c" line="529"/>
         <source>Error parsing the maxdepth</source>
         <translation>最大深度解析錯誤</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="515"/>
+        <location filename="../libdivecomputer.c" line="548"/>
         <source>Error parsing temperature</source>
         <translation>錯誤溫度解析</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="535"/>
+        <location filename="../libdivecomputer.c" line="568"/>
         <source>Error parsing the gas mix count</source>
         <translation>混合氣體數量解析錯誤</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="547"/>
+        <location filename="../libdivecomputer.c" line="580"/>
         <source>Error obtaining water salinity</source>
         <translation>得到錯誤的海水鹽度</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="556"/>
+        <location filename="../libdivecomputer.c" line="589"/>
         <source>Error obtaining surface pressure</source>
         <translation>得到錯誤的水面壓力</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="581"/>
+        <location filename="../libdivecomputer.c" line="614"/>
         <source>Error obtaining divemode</source>
         <translation>錯誤潛水模式取得</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="601"/>
+        <location filename="../libdivecomputer.c" line="634"/>
         <source>Error parsing the gas mix</source>
         <translation>混合氣體解析錯誤</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="651"/>
+        <location filename="../libdivecomputer.c" line="684"/>
         <source>Error parsing the samples</source>
         <translation>樣本解析錯誤</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="788"/>
+        <location filename="../libdivecomputer.c" line="821"/>
         <source>Event: waiting for user action</source>
         <translation>事件: 等待使用者動作</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="796"/>
+        <location filename="../libdivecomputer.c" line="829"/>
         <source>model=%u (0x%08x), firmware=%u (0x%08x), serial=%u (0x%08x)</source>
         <translation>型號=%u (0x%08x), 韌體=%u (0x%08x), 序號=%u (0x%08x)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="860"/>
+        <location filename="../libdivecomputer.c" line="893"/>
         <source>Error registering the event handler.</source>
         <translation>錯誤的註冊程序.</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="865"/>
+        <location filename="../libdivecomputer.c" line="898"/>
         <source>Error registering the cancellation handler.</source>
         <translation>錯誤的註冊取消程序.</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="886"/>
+        <location filename="../libdivecomputer.c" line="919"/>
         <source>Dive data import error</source>
         <translation>匯入潛水資料錯誤</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="925"/>
+        <location filename="../libdivecomputer.c" line="958"/>
         <source>Unable to create libdivecomputer context</source>
         <translation>無法建立 libdivecomputer 上下文</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="932"/>
+        <location filename="../libdivecomputer.c" line="965"/>
         <source>Unable to open %s %s (%s)</source>
         <translation> 無法開啟 %s %s (%s)</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="956"/>
+        <location filename="../libdivecomputer.c" line="989"/>
         <source>Insufficient privileges to open the device %s %s (%s)</source>
         <translation>無權限開啟裝置 %s %s (%s)</translation>
     </message>
@@ -8089,7 +8110,7 @@ Maximum</source>
         <translation>ean</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1126"/>
+        <location filename="../profile.c" line="1133"/>
         <source>@: %d:%02d
 D: %.1f%s
 </source>
@@ -8098,63 +8119,63 @@ D: %.1f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1129"/>
+        <location filename="../profile.c" line="1136"/>
         <source>P: %d%s
 </source>
         <translation>P: %d%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1133"/>
+        <location filename="../profile.c" line="1140"/>
         <source>T: %.1f%s
 </source>
         <translation>T: %.1f%s</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1139"/>
+        <location filename="../profile.c" line="1146"/>
         <source>V: %.1f%s
 </source>
         <translation>V: %.1f%s</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1142"/>
+        <location filename="../profile.c" line="1149"/>
         <source>SAC: %.*f%s/min
 </source>
         <translation>SAC: %.*f%s/min
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1144"/>
+        <location filename="../profile.c" line="1151"/>
         <source>CNS: %u%%
 </source>
         <translation>CNS: %u%%</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1146"/>
+        <location filename="../profile.c" line="1153"/>
         <source>pO%s: %.2fbar
 </source>
         <translation>pO%s: %.2fbar</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1148"/>
+        <location filename="../profile.c" line="1155"/>
         <source>pN%s: %.2fbar
 </source>
         <translation>pN%s: %.2fbar</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1150"/>
+        <location filename="../profile.c" line="1157"/>
         <source>pHe: %.2fbar
 </source>
         <translation>pHe: %.2fbar</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1153"/>
+        <location filename="../profile.c" line="1160"/>
         <source>MOD: %d%s
 </source>
         <translation>MOD: %d%s</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1160"/>
+        <location filename="../profile.c" line="1167"/>
         <source>EAD: %d%s
 EADD: %d%s
 </source>
@@ -8163,7 +8184,7 @@ EADD: %d%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1164"/>
+        <location filename="../profile.c" line="1171"/>
         <source>END: %d%s
 EADD: %d%s
 </source>
@@ -8172,168 +8193,168 @@ EADD: %d%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1176"/>
+        <location filename="../profile.c" line="1184"/>
         <source>Safetystop: %umin @ %.0f%s
 </source>
         <translation>安全停留: %umin @ %.0f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1179"/>
+        <location filename="../profile.c" line="1187"/>
         <source>Safetystop: unkn time @ %.0f%s
 </source>
         <translation>安全停留: 未知時間 @ %.0f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1184"/>
+        <location filename="../profile.c" line="1192"/>
         <source>Deco: %umin @ %.0f%s
 </source>
         <translation>Deco: %umin @ %.0f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1187"/>
+        <location filename="../profile.c" line="1195"/>
         <source>Deco: unkn time @ %.0f%s
 </source>
         <translation>減壓: 未知時間 @ %.0f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1191"/>
+        <location filename="../profile.c" line="1199"/>
         <source>In deco
 </source>
         <translation>減壓中
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1193"/>
+        <location filename="../profile.c" line="1201"/>
         <source>NDL: %umin
 </source>
         <translation>NDL: %umin
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1196"/>
+        <location filename="../profile.c" line="1204"/>
         <source>TTS: %umin
 </source>
         <translation>TTS: %umin
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1199"/>
+        <location filename="../profile.c" line="1207"/>
         <source>Deco: %umin @ %.0f%s (calc)
 </source>
         <translation>減壓: %umin @ %.0f%s (calc)
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1207"/>
+        <location filename="../profile.c" line="1215"/>
         <source>In deco (calc)
 </source>
         <translation>減壓 (計算)
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1210"/>
+        <location filename="../profile.c" line="1218"/>
         <source>NDL: %umin (calc)
 </source>
         <translation>NDL:%umin (預計)
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1212"/>
+        <location filename="../profile.c" line="1220"/>
         <source>NDL: &gt;2h (calc)
 </source>
         <translation type="unfinished"/>
     </message>
     <message>
-        <location filename="../profile.c" line="1216"/>
+        <location filename="../profile.c" line="1224"/>
         <source>TTS: %umin (calc)
 </source>
         <translation>TTS: %umin (calc)
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1218"/>
+        <location filename="../profile.c" line="1226"/>
         <source>TTS: &gt;2h (calc)
 </source>
         <translation type="unfinished"/>
     </message>
     <message>
-        <location filename="../profile.c" line="1221"/>
+        <location filename="../profile.c" line="1229"/>
         <source>RBT: %umin
 </source>
         <translation>RBT: %umin
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1224"/>
+        <location filename="../profile.c" line="1232"/>
         <source>Calculated ceiling %.0f%s
 </source>
         <translation>計算的上限深度 %.0f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1230"/>
+        <location filename="../profile.c" line="1238"/>
         <source>Tissue %.0fmin: %.1f%s
 </source>
         <translation>組織 %.0fmin: %.1f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1236"/>
+        <location filename="../profile.c" line="1244"/>
         <source>heartbeat: %d
 </source>
         <translation>心跳: %d
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1238"/>
+        <location filename="../profile.c" line="1246"/>
         <source>bearing: %d
 </source>
         <translation>方位: %d
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1241"/>
+        <location filename="../profile.c" line="1249"/>
         <source>mean depth to here %.1f%s
 </source>
         <translation>至此的平均深度 %.1f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1336"/>
+        <location filename="../profile.c" line="1344"/>
         <source>%sT: %d:%02d min</source>
         <translation>%sT: %d:%02d min</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1340"/>
-        <location filename="../profile.c" line="1344"/>
         <location filename="../profile.c" line="1348"/>
+        <location filename="../profile.c" line="1352"/>
+        <location filename="../profile.c" line="1356"/>
         <source>%s %sD:%.1f%s</source>
         <translation>%s %sD:%.1f%s</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1352"/>
+        <location filename="../profile.c" line="1360"/>
         <source>%s %sD:%.1f%s
 </source>
         <translation>%s %sD:%.1f%s
 </translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1356"/>
+        <location filename="../profile.c" line="1364"/>
         <source>%s%sV:%.2f%s</source>
         <translation>%s%sV:%.2f%s</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1360"/>
-        <location filename="../profile.c" line="1364"/>
+        <location filename="../profile.c" line="1368"/>
+        <location filename="../profile.c" line="1372"/>
         <source>%s %sV:%.2f%s</source>
         <translation>%s %sV:%.2f%s</translation>
     </message>
     <message>
-        <location filename="../profile.c" line="1371"/>
+        <location filename="../profile.c" line="1379"/>
         <source>%s %sP:%d %s</source>
         <translation>%s %sP:%d %s</translation>
     </message>
@@ -8368,16 +8389,6 @@ EADD: %d%s
         <translation>F</translation>
     </message>
     <message>
-        <location filename="../qthelper.cpp" line="1019"/>
-        <source>%1 %2 (%3 dives)</source>
-        <translation>%1 %2 (%3 潛水)</translation>
-    </message>
-    <message>
-        <location filename="../qthelper.cpp" line="1024"/>
-        <source>%1 %2 (1 dive)</source>
-        <translation>%1 %2 (1 潛水)</translation>
-    </message>
-    <message>
         <location filename="../dive.c" line="23"/>
         <source>boat</source>
         <translation>船潛</translation>
@@ -8651,42 +8662,47 @@ EADD: %d%s
         <translation>超過 %d日</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="220"/>
+        <location filename="../statistics.c" line="221"/>
         <source>%dd %dh %dmin</source>
         <translation>%dd %dh %dmin</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="222"/>
+        <location filename="../statistics.c" line="224"/>
+        <source>%dmin %dsecs</source>
+        <translation type="unfinished"/>
+    </message>
+    <message>
+        <location filename="../statistics.c" line="226"/>
         <source>%dh %dmin</source>
         <translation>%dh %dmin</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="234"/>
+        <location filename="../statistics.c" line="238"/>
         <source>for dives #</source>
         <translation>針對潛水 #</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="240"/>
+        <location filename="../statistics.c" line="244"/>
         <source>for selected dives</source>
         <translation>針對選擇的潛水</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="275"/>
+        <location filename="../statistics.c" line="279"/>
         <source>for dive #%d</source>
         <translation>針對潛水 #%d</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="277"/>
+        <location filename="../statistics.c" line="281"/>
         <source>for selected dive</source>
         <translation>針對選擇的潛水</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="279"/>
+        <location filename="../statistics.c" line="283"/>
         <source>for all dives</source>
         <translation>針對所有潛水</translation>
     </message>
     <message>
-        <location filename="../statistics.c" line="281"/>
+        <location filename="../statistics.c" line="285"/>
         <source>(no dives)</source>
         <translation>(無潛水)</translation>
     </message>
@@ -8786,7 +8802,7 @@ EADD: %d%s
         <translation>12月</translation>
     </message>
     <message>
-        <location filename="../libdivecomputer.c" line="154"/>
+        <location filename="../libdivecomputer.c" line="187"/>
         <location filename="../parse-xml.c" line="3177"/>
         <location filename="../uemis-downloader.c" line="133"/>
         <source>unknown</source>