aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--configuredivecomputerthreads.cpp615
1 files changed, 314 insertions, 301 deletions
diff --git a/configuredivecomputerthreads.cpp b/configuredivecomputerthreads.cpp
index 11eed252d..35b64bdac 100644
--- a/configuredivecomputerthreads.cpp
+++ b/configuredivecomputerthreads.cpp
@@ -547,6 +547,314 @@ static dc_status_t read_ostc3_settings(dc_device_t *device, DeviceDetails *m_dev
return rc;
}
+static dc_status_t read_ostc_settings(dc_device_t *device, DeviceDetails *m_deviceDetails)
+{
+ dc_status_t rc;
+ unsigned char data[256] = {};
+#ifdef DEBUG_OSTC_CF
+ // FIXME: how should we report settings not supported back?
+ unsigned char max_CF = 0;
+#endif
+ rc = hw_ostc_device_eeprom_read(device, 0, data, sizeof(data));
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+ m_deviceDetails->setSerialNo(QString::number(data[1] << 8 ^ data[0]));
+ m_deviceDetails->setNumberOfDives(data[3] << 8 ^ data[2]);
+ //Byte5-6:
+ //Gas 1 default (%O2=21, %He=0)
+ gas gas1;
+ gas1.oxygen = data[6];
+ gas1.helium = data[7];
+ //Byte9-10:
+ //Gas 2 default (%O2=21, %He=0)
+ gas gas2;
+ gas2.oxygen = data[10];
+ gas2.helium = data[11];
+ //Byte13-14:
+ //Gas 3 default (%O2=21, %He=0)
+ gas gas3;
+ gas3.oxygen = data[14];
+ gas3.helium = data[15];
+ //Byte17-18:
+ //Gas 4 default (%O2=21, %He=0)
+ gas gas4;
+ gas4.oxygen = data[18];
+ gas4.helium = data[19];
+ //Byte21-22:
+ //Gas 5 default (%O2=21, %He=0)
+ gas gas5;
+ gas5.oxygen = data[22];
+ gas5.helium = data[23];
+ //Byte25-26:
+ //Gas 6 current (%O2, %He)
+ m_deviceDetails->setSalinity(data[26]);
+ // Active Gas Flag Register
+ gas1.type = data[27] & 0x01;
+ gas2.type = (data[27] & 0x02) >> 1;
+ gas3.type = (data[27] & 0x04) >> 2;
+ gas4.type = (data[27] & 0x08) >> 3;
+ gas5.type = (data[27] & 0x10) >> 4;
+
+ // Gas switch depths
+ gas1.depth = data[28];
+ gas2.depth = data[29];
+ gas3.depth = data[30];
+ gas4.depth = data[31];
+ gas5.depth = data[32];
+ // 33 which gas is Fist gas
+ switch(data[33]) {
+ case 1:
+ gas1.type = 2;
+ break;
+ case 2:
+ gas2.type = 2;
+ break;
+ case 3:
+ gas3.type = 2;
+ break;
+ case 4:
+ gas4.type = 2;
+ break;
+ case 5:
+ gas5.type = 2;
+ break;
+ default:
+ //Error?
+ break;
+ }
+ // Data filled up, set the gases.
+ m_deviceDetails->setGas1(gas1);
+ m_deviceDetails->setGas2(gas2);
+ m_deviceDetails->setGas3(gas3);
+ m_deviceDetails->setGas4(gas4);
+ m_deviceDetails->setGas5(gas5);
+ m_deviceDetails->setDecoType(data[34]);
+ //Byte36:
+ //Use O2 Sensor Module in CC Modes (0= OFF, 1= ON) (Only available in old OSTC1 - unused for OSTC Mk.2/2N)
+ //m_deviceDetails->setCcrMode(data[35]);
+ setpoint sp1;
+ sp1.sp = data[36];
+ sp1.depth = 0;
+ setpoint sp2;
+ sp2.sp = data[37];
+ sp2.depth = 0;
+ setpoint sp3;
+ sp3.sp = data[38];
+ sp3.depth = 0;
+ m_deviceDetails->setSp1(sp1);
+ m_deviceDetails->setSp2(sp2);
+ m_deviceDetails->setSp3(sp3);
+ // Byte41-42:
+ // Lowest Battery voltage seen (in mV)
+ // Byte43:
+ // Lowest Battery voltage seen at (Month)
+ // Byte44:
+ // Lowest Battery voltage seen at (Day)
+ // Byte45:
+ // Lowest Battery voltage seen at (Year)
+ // Byte46-47:
+ // Lowest Battery voltage seen at (Temperature in 0.1 °C)
+ // Byte48:
+ // Last complete charge at (Month)
+ // Byte49:
+ // Last complete charge at (Day)
+ // Byte50:
+ // Last complete charge at (Year)
+ // Byte51-52:
+ // Total charge cycles
+ // Byte53-54:
+ // Total complete charge cycles
+ // Byte55-56:
+ // Temperature Extrema minimum (Temperature in 0.1 °C)
+ // Byte57:
+ // Temperature Extrema minimum at (Month)
+ // Byte58:
+ // Temperature Extrema minimum at (Day)
+ // Byte59:
+ // Temperature Extrema minimum at (Year)
+ // Byte60-61:
+ // Temperature Extrema maximum (Temperature in 0.1 °C)
+ // Byte62:
+ // Temperature Extrema maximum at (Month)
+ // Byte63:
+ // Temperature Extrema maximum at (Day)
+ // Byte64:
+ // Temperature Extrema maximum at (Year)
+ // Byte65:
+ // Custom Text active (=1), Custom Text Disabled (<>1)
+ // Byte66-90:
+ // TO FIX EDITOR SYNTAX/INDENT {
+ // (25Bytes): Custom Text for Surfacemode (Real text must end with "}")
+ // Example: OSTC Dive Computer} (19 Characters incl. "}") Bytes 85-90 will be ignored.
+ if (data[64] == 1) {
+ // Make shure the data is null-terminated
+ data[89] = 0;
+ // Find the internal termination and replace it with 0
+ char *term = strchr((char *)data + 65, (int)'}');
+ if (term)
+ *term = 0;
+ m_deviceDetails->setCustomText((const char *)data + 65);
+ }
+ // Byte91:
+ // Dim OLED in Divemode (>0), Normal mode (=0)
+ // Byte92:
+ // Date format for all outputs:
+ // =0: MM/DD/YY
+ // =1: DD/MM/YY
+ // =2: YY/MM/DD
+ m_deviceDetails->setDateFormat(data[91]);
+ // Byte93:
+ // Total number of CF used in installed firmware
+#ifdef DEBUG_OSTC_CF
+ max_CF = data[92];
+#endif
+ // Byte94:
+ // Last selected view for customview area in surface mode
+ // Byte95:
+ // Last selected view for customview area in dive mode
+ // Byte96-97:
+ // Diluent 1 Default (%O2,%He)
+ // Byte98-99:
+ // Diluent 1 Current (%O2,%He)
+ gas dil1 = {};
+ dil1.oxygen = data[97];
+ dil1.helium = data[98];
+ // Byte100-101:
+ // Gasuent 2 Default (%O2,%He)
+ // Byte102-103:
+ // Gasuent 2 Current (%O2,%He)
+ gas dil2 = {};
+ dil2.oxygen = data[101];
+ dil2.helium = data[102];
+ // Byte104-105:
+ // Gasuent 3 Default (%O2,%He)
+ // Byte106-107:
+ // Gasuent 3 Current (%O2,%He)
+ gas dil3 = {};
+ dil3.oxygen = data[105];
+ dil3.helium = data[106];
+ // Byte108-109:
+ // Gasuent 4 Default (%O2,%He)
+ // Byte110-111:
+ // Gasuent 4 Current (%O2,%He)
+ gas dil4 = {};
+ dil4.oxygen = data[109];
+ dil4.helium = data[110];
+ // Byte112-113:
+ // Gasuent 5 Default (%O2,%He)
+ // Byte114-115:
+ // Gasuent 5 Current (%O2,%He)
+ gas dil5 = {};
+ dil5.oxygen = data[113];
+ dil5.helium = data[114];
+ // Byte116:
+ // First Diluent (1-5)
+ switch(data[115]) {
+ case 1:
+ dil1.type = 2;
+ break;
+ case 2:
+ dil2.type = 2;
+ break;
+ case 3:
+ dil3.type = 2;
+ break;
+ case 4:
+ dil4.type = 2;
+ break;
+ case 5:
+ dil5.type = 2;
+ break;
+ default:
+ //Error?
+ break;
+ }
+ m_deviceDetails->setDil1(dil1);
+ m_deviceDetails->setDil2(dil2);
+ m_deviceDetails->setDil3(dil3);
+ m_deviceDetails->setDil4(dil4);
+ m_deviceDetails->setDil5(dil5);
+ // Byte117-128:
+ // not used/reserved
+ // Byte129-256:
+ // 32 custom Functions (CF0-CF31)
+
+ // Decode the relevant ones
+ // CF11: Factor for saturation processes
+ m_deviceDetails->setSaturation(read_ostc_cf(data, 11));
+ // CF12: Factor for desaturation processes
+ m_deviceDetails->setDesaturation(read_ostc_cf(data, 12));
+ // CF17: Lower threshold for ppO2 warning
+ m_deviceDetails->setPpO2Min(read_ostc_cf(data, 17));
+ // CF18: Upper threshold for ppO2 warning
+ m_deviceDetails->setPpO2Max(read_ostc_cf(data, 18));
+ // CF20: Depth sampling rate for Profile storage
+ m_deviceDetails->setSamplingRate(read_ostc_cf(data, 20));
+ // CF29: Depth of last decompression stop
+ m_deviceDetails->setLastDeco(read_ostc_cf(data, 29));
+
+#ifdef DEBUG_OSTC_CF
+ for (int cf = 0; cf <= 31 && cf <= max_CF; cf++)
+ printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
+#endif
+
+ rc = hw_ostc_device_eeprom_read(device, 1, data, sizeof(data));
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+ // Byte1:
+ // Logbook version indicator (Not writable!)
+ // Byte2-3:
+ // Last Firmware installed, 1st Byte.2nd Byte (e.g. „1.90“) (Not writable!)
+ m_deviceDetails->setFirmwareVersion(QString::number(data[1]) + "." + QString::number(data[2]));
+ // Byte4:
+ // OLED brightness (=0: Eco, =1 High) (Not writable!)
+ // Byte5-11:
+ // Time/Date vault during firmware updates
+ // Byte12-128
+ // not used/reserved
+ // Byte129-256:
+ // 32 custom Functions (CF 32-63)
+
+ // Decode the relevant ones
+ // CF32: Gradient Factor low
+ m_deviceDetails->setGfLow(read_ostc_cf(data, 32));
+ // CF33: Gradient Factor high
+ m_deviceDetails->setGfHigh(read_ostc_cf(data, 33));
+ // CF58: Future time to surface setFutureTTS
+ m_deviceDetails->setFutureTTS(read_ostc_cf(data, 58));
+
+#ifdef DEBUG_OSTC_CF
+ for (int cf = 32; cf <= 63 && cf <= max_CF; cf++)
+ printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
+#endif
+
+ rc = hw_ostc_device_eeprom_read(device, 2, data, sizeof(data));
+ if (rc != DC_STATUS_SUCCESS)
+ return rc;
+ // Byte1-4:
+ // not used/reserved (Not writable!)
+ // Byte5-128:
+ // not used/reserved
+ // Byte129-256:
+ // 32 custom Functions (CF 64-95)
+
+ // Decode the relevant ones
+ // CF65: Show safety stop
+ m_deviceDetails->setSafetyStop(read_ostc_cf(data, 65));
+ // CF67: Alternaitve Gradient Factor low
+ m_deviceDetails->setAGFLow(read_ostc_cf(data, 67));
+ // CF68: Alternative Gradient Factor high
+ m_deviceDetails->setAGFHigh(read_ostc_cf(data, 68));
+ // CF69: Allow Gradient Factor change
+ m_deviceDetails->setAGFSelectable(read_ostc_cf(data, 69));
+#ifdef DEBUG_OSTC_CF
+ for (int cf = 64; cf <= 95 && cf <= max_CF; cf++)
+ printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
+#endif
+
+ return rc;
+}
+
void ReadSettingsThread::run()
{
bool supported = false;
@@ -584,309 +892,14 @@ void ReadSettingsThread::run()
#ifdef DEBUG_OSTC
case DC_FAMILY_NULL:
#endif
- case DC_FAMILY_HW_OSTC: {
+ case DC_FAMILY_HW_OSTC:
supported = true;
- unsigned char data[256] = {};
-#ifdef DEBUG_OSTC_CF
- // FIXME: how should we report settings not supported back?
- unsigned char max_CF = 0;
-#endif
- rc = hw_ostc_device_eeprom_read(m_data->device, 0, data, sizeof(data));
- if (rc == DC_STATUS_SUCCESS) {
- m_deviceDetails->setSerialNo(QString::number(data[1] << 8 ^ data[0]));
- m_deviceDetails->setNumberOfDives(data[3] << 8 ^ data[2]);
- //Byte5-6:
- //Gas 1 default (%O2=21, %He=0)
- gas gas1;
- gas1.oxygen = data[6];
- gas1.helium = data[7];
- //Byte9-10:
- //Gas 2 default (%O2=21, %He=0)
- gas gas2;
- gas2.oxygen = data[10];
- gas2.helium = data[11];
- //Byte13-14:
- //Gas 3 default (%O2=21, %He=0)
- gas gas3;
- gas3.oxygen = data[14];
- gas3.helium = data[15];
- //Byte17-18:
- //Gas 4 default (%O2=21, %He=0)
- gas gas4;
- gas4.oxygen = data[18];
- gas4.helium = data[19];
- //Byte21-22:
- //Gas 5 default (%O2=21, %He=0)
- gas gas5;
- gas5.oxygen = data[22];
- gas5.helium = data[23];
- //Byte25-26:
- //Gas 6 current (%O2, %He)
- m_deviceDetails->setSalinity(data[26]);
- // Active Gas Flag Register
- gas1.type = data[27] & 0x01;
- gas2.type = (data[27] & 0x02) >> 1;
- gas3.type = (data[27] & 0x04) >> 2;
- gas4.type = (data[27] & 0x08) >> 3;
- gas5.type = (data[27] & 0x10) >> 4;
-
- // Gas switch depths
- gas1.depth = data[28];
- gas2.depth = data[29];
- gas3.depth = data[30];
- gas4.depth = data[31];
- gas5.depth = data[32];
- // 33 which gas is Fist gas
- switch (data[33]) {
- case 1:
- gas1.type = 2;
- break;
- case 2:
- gas2.type = 2;
- break;
- case 3:
- gas3.type = 2;
- break;
- case 4:
- gas4.type = 2;
- break;
- case 5:
- gas5.type = 2;
- break;
- default:
- //Error?
- break;
- }
- // Data filled up, set the gases.
- m_deviceDetails->setGas1(gas1);
- m_deviceDetails->setGas2(gas2);
- m_deviceDetails->setGas3(gas3);
- m_deviceDetails->setGas4(gas4);
- m_deviceDetails->setGas5(gas5);
- m_deviceDetails->setDecoType(data[34]);
- //Byte36:
- //Use O2 Sensor Module in CC Modes (0= OFF, 1= ON) (Only available in old OSTC1 - unused for OSTC Mk.2/2N)
- //m_deviceDetails->setCcrMode(data[35]);
- setpoint sp1;
- sp1.sp = data[36];
- sp1.depth = 0;
- setpoint sp2;
- sp2.sp = data[37];
- sp2.depth = 0;
- setpoint sp3;
- sp3.sp = data[38];
- sp3.depth = 0;
- m_deviceDetails->setSp1(sp1);
- m_deviceDetails->setSp2(sp2);
- m_deviceDetails->setSp3(sp3);
- // Byte41-42:
- // Lowest Battery voltage seen (in mV)
- // Byte43:
- // Lowest Battery voltage seen at (Month)
- // Byte44:
- // Lowest Battery voltage seen at (Day)
- // Byte45:
- // Lowest Battery voltage seen at (Year)
- // Byte46-47:
- // Lowest Battery voltage seen at (Temperature in 0.1 °C)
- // Byte48:
- // Last complete charge at (Month)
- // Byte49:
- // Last complete charge at (Day)
- // Byte50:
- // Last complete charge at (Year)
- // Byte51-52:
- // Total charge cycles
- // Byte53-54:
- // Total complete charge cycles
- // Byte55-56:
- // Temperature Extrema minimum (Temperature in 0.1 °C)
- // Byte57:
- // Temperature Extrema minimum at (Month)
- // Byte58:
- // Temperature Extrema minimum at (Day)
- // Byte59:
- // Temperature Extrema minimum at (Year)
- // Byte60-61:
- // Temperature Extrema maximum (Temperature in 0.1 °C)
- // Byte62:
- // Temperature Extrema maximum at (Month)
- // Byte63:
- // Temperature Extrema maximum at (Day)
- // Byte64:
- // Temperature Extrema maximum at (Year)
- // Byte65:
- // Custom Text active (=1), Custom Text Disabled (<>1)
- // Byte66-90:
- // TO FIX EDITOR SYNTAX/INDENT {
- // (25Bytes): Custom Text for Surfacemode (Real text must end with "}")
- // Example: OSTC Dive Computer} (19 Characters incl. "}") Bytes 85-90 will be ignored.
- if (data[64] == 1) {
- // Make shure the data is null-terminated
- data[89] = 0;
- // Find the internal termination and replace it with 0
- char *term = strchr((char *)data + 65, (int)'}');
- if (term)
- *term = 0;
- m_deviceDetails->setCustomText((const char *)data + 65);
- }
- // Byte91:
- // Dim OLED in Divemode (>0), Normal mode (=0)
- // Byte92:
- // Date format for all outputs:
- // =0: MM/DD/YY
- // =1: DD/MM/YY
- // =2: YY/MM/DD
- m_deviceDetails->setDateFormat(data[91]);
- // Byte93:
- // Total number of CF used in installed firmware
-#ifdef DEBUG_OSTC_CF
- max_CF = data[92];
-#endif
- // Byte94:
- // Last selected view for customview area in surface mode
- // Byte95:
- // Last selected view for customview area in dive mode
- // Byte96-97:
- // Diluent 1 Default (%O2,%He)
- // Byte98-99:
- // Diluent 1 Current (%O2,%He)
- gas dil1 = {};
- dil1.oxygen = data[97];
- dil1.helium = data[98];
- // Byte100-101:
- // Gasuent 2 Default (%O2,%He)
- // Byte102-103:
- // Gasuent 2 Current (%O2,%He)
- gas dil2 = {};
- dil2.oxygen = data[101];
- dil2.helium = data[102];
- // Byte104-105:
- // Gasuent 3 Default (%O2,%He)
- // Byte106-107:
- // Gasuent 3 Current (%O2,%He)
- gas dil3 = {};
- dil3.oxygen = data[105];
- dil3.helium = data[106];
- // Byte108-109:
- // Gasuent 4 Default (%O2,%He)
- // Byte110-111:
- // Gasuent 4 Current (%O2,%He)
- gas dil4 = {};
- dil4.oxygen = data[109];
- dil4.helium = data[110];
- // Byte112-113:
- // Gasuent 5 Default (%O2,%He)
- // Byte114-115:
- // Gasuent 5 Current (%O2,%He)
- gas dil5 = {};
- dil5.oxygen = data[113];
- dil5.helium = data[114];
- // Byte116:
- // First Diluent (1-5)
- switch (data[115]) {
- case 1:
- dil1.type = 2;
- break;
- case 2:
- dil2.type = 2;
- break;
- case 3:
- dil3.type = 2;
- break;
- case 4:
- dil4.type = 2;
- break;
- case 5:
- dil5.type = 2;
- break;
- default:
- //Error?
- break;
- }
- m_deviceDetails->setDil1(dil1);
- m_deviceDetails->setDil2(dil2);
- m_deviceDetails->setDil3(dil3);
- m_deviceDetails->setDil4(dil4);
- m_deviceDetails->setDil5(dil5);
- // Byte117-128:
- // not used/reserved
- // Byte129-256:
- // 32 custom Functions (CF0-CF31)
-
- // Decode the relevant ones
- // CF11: Factor for saturation processes
- m_deviceDetails->setSaturation(read_ostc_cf(data, 11));
- // CF12: Factor for desaturation processes
- m_deviceDetails->setDesaturation(read_ostc_cf(data, 12));
- // CF17: Lower threshold for ppO2 warning
- m_deviceDetails->setPpO2Min(read_ostc_cf(data, 17));
- // CF18: Upper threshold for ppO2 warning
- m_deviceDetails->setPpO2Max(read_ostc_cf(data, 18));
- // CF20: Depth sampling rate for Profile storage
- m_deviceDetails->setSamplingRate(read_ostc_cf(data, 20));
- // CF29: Depth of last decompression stop
- m_deviceDetails->setLastDeco(read_ostc_cf(data, 29));
-
-#ifdef DEBUG_OSTC_CF
- for (int cf = 0; cf <= 31 && cf <= max_CF; cf++)
- printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
-#endif
- }
- rc = hw_ostc_device_eeprom_read(m_data->device, 1, data, sizeof(data));
- if (rc == DC_STATUS_SUCCESS) {
- // Byte1:
- // Logbook version indicator (Not writable!)
- // Byte2-3:
- // Last Firmware installed, 1st Byte.2nd Byte (e.g. „1.90“) (Not writable!)
- m_deviceDetails->setFirmwareVersion(QString::number(data[1]) + "." + QString::number(data[2]));
- // Byte4:
- // OLED brightness (=0: Eco, =1 High) (Not writable!)
- // Byte5-11:
- // Time/Date vault during firmware updates
- // Byte12-128
- // not used/reserved
- // Byte129-256:
- // 32 custom Functions (CF 32-63)
-
- // Decode the relevant ones
- // CF32: Gradient Factor low
- m_deviceDetails->setGfLow(read_ostc_cf(data, 32));
- // CF33: Gradient Factor high
- m_deviceDetails->setGfHigh(read_ostc_cf(data, 33));
- // CF58: Future time to surface setFutureTTS
- m_deviceDetails->setFutureTTS(read_ostc_cf(data, 58));
-#ifdef DEBUG_OSTC_CF
- for (int cf = 32; cf <= 63 && cf <= max_CF; cf++)
- printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
-#endif
- }
- rc = hw_ostc_device_eeprom_read(m_data->device, 2, data, sizeof(data));
- if (rc == DC_STATUS_SUCCESS) {
- // Byte1-4:
- // not used/reserved (Not writable!)
- // Byte5-128:
- // not used/reserved
- // Byte129-256:
- // 32 custom Functions (CF 64-95)
-
- // Decode the relevant ones
- // CF65: Show safety stop
- m_deviceDetails->setSafetyStop(read_ostc_cf(data, 65));
- // CF67: Alternaitve Gradient Factor low
- m_deviceDetails->setAGFLow(read_ostc_cf(data, 67));
- // CF68: Alternative Gradient Factor high
- m_deviceDetails->setAGFHigh(read_ostc_cf(data, 68));
- // CF69: Allow Gradient Factor change
- m_deviceDetails->setAGFSelectable(read_ostc_cf(data, 69));
-#ifdef DEBUG_OSTC_CF
- for (int cf = 64; cf <= 95 && cf <= max_CF; cf++)
- printf("CF %d: %d\n", cf, read_ostc_cf(data, cf));
-#endif
- }
- emit devicedetails(m_deviceDetails);
+ rc = read_ostc_settings(m_data->device, m_deviceDetails);
+ if (rc == DC_STATUS_SUCCESS)
+ emit devicedetails(m_deviceDetails);
+ else
+ emit error("Failed!");
break;
- }
default:
supported = false;
break;
generated by cgit v1.2.3-70-g09d2 (git 2.47.0) at 2024-12-26 02:58:38 +0000