diff options
Diffstat (limited to 'Documentation/user-manual.txt')
| -rw-r--r-- | Documentation/user-manual.txt | 48 |
1 files changed, 45 insertions, 3 deletions
diff --git a/Documentation/user-manual.txt b/Documentation/user-manual.txt index f393bf84e..f7fad6e0e 100644 --- a/Documentation/user-manual.txt +++ b/Documentation/user-manual.txt @@ -5,6 +5,8 @@ Subsurface 3.0.2 User Manual :revdate: March 2013 :revnumber: v3.0.2 :revdate: March 2013 +:revnumber: v3.1 +:revdate: May 2013 :toc: :icons: :numbered: @@ -423,6 +425,7 @@ The purpose of the fields is described in the table below: [width="90%",cols="<33%,67%",options="header"] |=============================================================================== | Field | Description of field +| Dive number, date and time | A button with dive number and date that gives a dialog to edit date/time/depth when clicked | Location | An input where you can enter your new location, or you can choose with the pull-down previous locations | GPS (WGS84 or GPS format) | An input where you can enter geographic coordinates of the dive site | Pick on map | A button you can click on to display an interactive map on which you can select the location of the dive site @@ -431,7 +434,8 @@ The purpose of the fields is described in the table below: | Rating | A pull-down where you can rate your dive | Suit | An input where you can track the exposure protection suit you were wearing | Visibility | A pull-down where you can rate the visibility underwater -| Air Temp in deg. C | An input where you can enter the air temperature +| Air Temp in deg. C/F | An input where you can enter the air temperature +| Dive Tags | Check boxes allowing you to describe the dive (e.g. shore & wreck) | Notes | A free input where you can enter information about your dive. What you've seen, etc. |=============================================================================== @@ -863,7 +867,7 @@ be imported to Subsurface either from command line or from GUI. Export from divelogs.de ^^^^^^^^^^^^^^^^^^^^^^^ - - Login to http://en.divelogs.de with your account + - Login to https://en.divelogs.de with your account - Go to the 'Export Logbook' page - Choose 'DLD Export of your logbook' and save the resulting yourUserName.DLD file @@ -940,6 +944,42 @@ Please report your findings for UDDF data from different sources than descibed in this document at http://trac.hohndel.org[our bugtracker] or send an email to mailto:subsurface@hohndel.org[our mailing list]. +[[S_Exporting]] +Exporting dives from Subsurface +------------------------------- + +We currently support exporting the divelog to UDDF format and directly uploading to divelogs.de. + +[[S_UploadingDivelogsDe]] +Uploading Dives to divelogs.de +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Subsurface supports uploading dives directly to divelogs.de. You can upload +either selected dives or all the dives. When selecting to upload, you are +presented a simple dialog for user name and password. Note that the password is +displayed on screen and is stored on configuration file in clear-text. + +image::images/upload_divelogs_de.png["Upload to divelogs.de",align="center"] + +Note that uploading dives to divelogs.de requires Internet connectivity and cannot be done off-line. + +.Uploading selected dives to divelogs.de + +Mark the dives to be uploaded in the dive list. Click right mouse button on one +of the selected dives and select the menu 'Upload dive(s) to divelogs.de'. + +.Uploading all dives to divelogs.de + +You can of course mark all the dives and upload them using the right mouse +button menu. However, you can also select menu 'File - Upload to +divelogs.de...' + +[[S_ExportingUDDF]] +Exporting dives to UDDF +~~~~~~~~~~~~~~~~~~~~~~~ + +When you select dives and choose the exporting option from right click menu, you get a dialog asking where to save the file. Similarly when you select the menu 'File - Export UDDF' you can export all the dives to UDDF file of your choosing. + [[S_DivePlanning]] Planning Dives -------------- @@ -981,7 +1021,7 @@ are familiar with dive planning or use closed circuit rebreathers. | GFlow | Gradient factor low value affects the ceiling calculation, leave to default if you are not familiar with GF | GFhigh | Gradient factor high value affects the ceiling calculation, leave to default if you are not familiar GF | **Ending Depth** | Depth where current segment ends; a different depth from the previous segment creates a transition segment for ascent or descent, keeping the same depth creates a segment at the given depth. By default the planner uses the measurement for length set in the preferences (meters for most users) - this can be overridden by explicitly specifying 'm' or 'ft'. -| **Segment Time** | Enter time in minutes; segment duration / relative time is indicated by a '+': '+3' or '+3:00' creates a segment that lasts 3 minutes, a bare number like '7' is used for a segment that ends 7 minutes after the start of the dive. +| **Segment Time** | Enter time in minutes; segment duration / relative time is indicated by a '+': '+3' or '+3:00' creates a segment that lasts 3 minutes, an absolute time is indicated by @ character. Time '@7:30' means that the segment ends 7 minutes and 30 seconds after the start of a dive. | **Gas Used** | Breathing gas mix used; the parser is reasonably flexible and understands terms like AIR, EAN32, 36% or 15/50 (compressed air, 32% nitrox, 36% nitrox or 15% O₂ / 50% He trimix, respectively); leaving this field empty indicates continued use of the previous gas, air by default | **CC SetPoint** | SetPoint when diving with a closed circuit rebreather. Leave empty for open circuit dives with standard scuba equipment |=============================================================================== @@ -1094,6 +1134,8 @@ The file menu is used for the following menu options: - Save As:: Save your current divelogs or changes you made to your divelogs under a different name - Close:: Close your current divelog, saving as necessary - Import File(s):: Import your dives from files exported by other divelogs + - Export UDDF:: Export all dives to UDDF format + - Upload to divelogs.de Upload all dives to divelogs.de (requires Internet connectivity) - Print:: Print your current divelog profiles and information about the dive - Preferences:: Set your preferences as described in <<S_SettingUpPreferences,chapter Setting up Preferences>> - Quit:: Quit the program |